Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 927

Last change on this file since 927 was 927, checked in by raasch, 12 years ago
masking method can be switched on for mg-solver using inipar parameter masking_method
Property svn:keywords set to `Id`
File size: 79.8 KB

Rev	Line
[1]	1	SUBROUTINE header
	2
	3	!------------------------------------------------------------------------------!
[254]	4	! Current revisions:
[1]	5	! -----------------
[927]	6	! output of masking_method for mg-solver
[392]	7	!
	8	! Former revisions:
	9	! -----------------
	10	! $Id: header.f90 927 2012-06-06 19:15:04Z raasch $
	11	!
[869]	12	! 868 2012-03-28 12:21:07Z raasch
	13	! translation velocity in Galilean transformation changed to 0.6 * ug
	14	!
[834]	15	! 833 2012-02-22 08:55:55Z maronga
	16	! Adjusted format for leaf area density
	17	!
[829]	18	! 828 2012-02-21 12:00:36Z raasch
	19	! output of dissipation_classes + radius_classes
	20	!
[826]	21	! 825 2012-02-19 03:03:44Z raasch
	22	! Output of cloud physics parameters/quantities complemented and restructured
	23	!
[768]	24	! 767 2011-10-14 06:39:12Z raasch
	25	! Output of given initial u,v-profiles
	26	!
[760]	27	! 759 2011-09-15 13:58:31Z raasch
	28	! output of maximum number of parallel io streams
	29	!
[708]	30	! 707 2011-03-29 11:39:40Z raasch
	31	! bc_lr/ns replaced by bc_lr/ns_cyc
	32	!
[668]	33	! 667 2010-12-23 12:06:00Z suehring/gryschka
	34	! Output of advection scheme.
	35	! Modified output of Prandtl-layer height.
	36	!
[581]	37	! 580 2010-10-05 13:59:11Z heinze
	38	! Renaming of ws_vertical_gradient to subs_vertical_gradient,
	39	! ws_vertical_gradient_level to subs_vertical_gradient_level and
	40	! ws_vertical_gradient_level_ind to subs_vertical_gradient_level_i
	41	!
[494]	42	! 493 2010-03-01 08:30:24Z raasch
	43	! NetCDF data output format extendend for NetCDF4/HDF5
	44	!
[482]	45	! 449 2010-02-02 11:23:59Z raasch
	46	! +large scale vertical motion (subsidence/ascent)
	47	! Bugfix: index problem concerning gradient_level indices removed
	48	!
[449]	49	! 410 2009-12-04 17:05:40Z letzel
	50	! Masked data output: + dt_domask, mask_01~20_x\|y\|z, mask_01~20_x\|y\|z_loop,
[493]	51	! mask_scale\|_x\|y\|z, masks, skip_time_domask
[449]	52	!
[392]	53	! 346 2009-07-06 10:13:41Z raasch
[328]	54	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
[291]	55	! Coupling with independent precursor runs.
[254]	56	! Output of messages replaced by message handling routine.
[336]	57	! Output of several additional dvr parameters
[240]	58	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
[241]	59	! canyon_wall_south, conserve_volume_flow_mode, dp_external, dp_level_b,
	60	! dp_smooth, dpdxy, u_bulk, v_bulk
[256]	61	! topography_grid_convention moved from user_header
[292]	62	! small bugfix concerning 3d 64bit netcdf output format
[1]	63	!
[226]	64	! 206 2008-10-13 14:59:11Z raasch
	65	! Bugfix: error in zu index in case of section_xy = -1
	66	!
[200]	67	! 198 2008-09-17 08:55:28Z raasch
	68	! Format adjustments allowing output of larger revision numbers
	69	!
[198]	70	! 197 2008-09-16 15:29:03Z raasch
	71	! allow 100 spectra levels instead of 10 for consistency with
	72	! define_netcdf_header,
	73	! bugfix in the output of the characteristic levels of potential temperature,
	74	! geostrophic wind, scalar concentration, humidity and leaf area density,
	75	! output of turbulence recycling informations
	76	!
[139]	77	! 138 2007-11-28 10:03:58Z letzel
	78	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
	79	! Allow two instead of one digit to specify isosurface and slicer variables.
	80	! Output of sorting frequency of particles
	81	!
[110]	82	! 108 2007-08-24 15:10:38Z letzel
	83	! Output of informations for coupled model runs (boundary conditions etc.)
	84	! + output of momentumfluxes at the top boundary
	85	! Rayleigh damping for ocean, e_init
	86	!
[98]	87	! 97 2007-06-21 08:23:15Z raasch
	88	! Adjustments for the ocean version.
	89	! use_pt_reference renamed use_reference
	90	!
[90]	91	! 87 2007-05-22 15:46:47Z raasch
	92	! Bugfix: output of use_upstream_for_tke
	93	!
[83]	94	! 82 2007-04-16 15:40:52Z raasch
	95	! Preprocessor strings for different linux clusters changed to "lc",
	96	! routine local_flush is used for buffer flushing
	97	!
[77]	98	! 76 2007-03-29 00:58:32Z raasch
	99	! Output of netcdf_64bit_3d, particles-package is now part of the default code,
	100	! output of the loop optimization method, moisture renamed humidity,
	101	! output of subversion revision number
	102	!
[39]	103	! 19 2007-02-23 04:53:48Z raasch
	104	! Output of scalar flux applied at top boundary
	105	!
[3]	106	! RCS Log replace by Id keyword, revision history cleaned up
	107	!
[1]	108	! Revision 1.63 2006/08/22 13:53:13 raasch
	109	! Output of dz_max
	110	!
	111	! Revision 1.1 1997/08/11 06:17:20 raasch
	112	! Initial revision
	113	!
	114	!
	115	! Description:
	116	! ------------
	117	! Writing a header with all important informations about the actual run.
	118	! This subroutine is called three times, two times at the beginning
	119	! (writing information on files RUN_CONTROL and HEADER) and one time at the
	120	! end of the run, then writing additional information about CPU-usage on file
	121	! header.
[411]	122	!-----------------------------------------------------------------------------!
[1]	123
	124	USE arrays_3d
	125	USE control_parameters
	126	USE cloud_parameters
	127	USE cpulog
	128	USE dvrp_variables
	129	USE grid_variables
	130	USE indices
	131	USE model_1d
	132	USE particle_attributes
	133	USE pegrid
[411]	134	USE subsidence_mod
[1]	135	USE spectrum
	136
	137	IMPLICIT NONE
	138
	139	CHARACTER (LEN=1) :: prec
	140	CHARACTER (LEN=2) :: do2d_mode
	141	CHARACTER (LEN=5) :: section_chr
	142	CHARACTER (LEN=9) :: time_to_string
	143	CHARACTER (LEN=10) :: coor_chr, host_chr
	144	CHARACTER (LEN=16) :: begin_chr
[200]	145	CHARACTER (LEN=23) :: ver_rev
[1]	146	CHARACTER (LEN=40) :: output_format
[167]	147	CHARACTER (LEN=70) :: char1, char2, dopr_chr, &
[1]	148	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
[410]	149	domask_chr, run_classification
[167]	150	CHARACTER (LEN=86) :: coordinates, gradients, learde, slices, &
	151	temperatures, ugcomponent, vgcomponent
[1]	152	CHARACTER (LEN=85) :: roben, runten
	153
[410]	154	CHARACTER (LEN=1), DIMENSION(1:3) :: dir = (/ 'x', 'y', 'z' /)
	155
	156	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, ch, count, cwx, cwy, &
	157	cxl, cxr, cyn, cys, dim, i, ihost, io, j, l, ll, m, mpi_type
[1]	158	REAL :: cpuseconds_per_simulated_second
	159
	160	!
	161	!-- Open the output file. At the end of the simulation, output is directed
	162	!-- to unit 19.
	163	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
	164	.NOT. simulated_time_at_begin /= simulated_time ) THEN
	165	io = 15 ! header output on file RUN_CONTROL
	166	ELSE
	167	io = 19 ! header output on file HEADER
	168	ENDIF
	169	CALL check_open( io )
	170
	171	!
	172	!-- At the end of the run, output file (HEADER) will be rewritten with
	173	!-- new informations
	174	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
	175
	176	!
	177	!-- Determine kind of model run
	178	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
	179	run_classification = '3D - restart run'
[328]	180	ELSEIF ( TRIM( initializing_actions ) == 'cyclic_fill' ) THEN
	181	run_classification = '3D - run with cyclic fill of 3D - prerun data'
[147]	182	ELSEIF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
	183	run_classification = '3D - run without 1D - prerun'
[197]	184	ELSEIF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[147]	185	run_classification = '3D - run with 1D - prerun'
[197]	186	ELSEIF ( INDEX( initializing_actions, 'by_user' ) /=0 ) THEN
	187	run_classification = '3D - run initialized by user'
[1]	188	ELSE
[254]	189	message_string = ' unknown action(s): ' // TRIM( initializing_actions )
	190	CALL message( 'header', 'PA0191', 0, 0, 0, 6, 0 )
[1]	191	ENDIF
[97]	192	IF ( ocean ) THEN
	193	run_classification = 'ocean - ' // run_classification
	194	ELSE
	195	run_classification = 'atmosphere - ' // run_classification
	196	ENDIF
[1]	197
	198	!
	199	!-- Run-identification, date, time, host
	200	host_chr = host(1:10)
[75]	201	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
[102]	202	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
[291]	203	IF ( TRIM( coupling_mode ) /= 'uncoupled' ) THEN
	204	#if defined( __mpi2 )
	205	mpi_type = 2
	206	#else
	207	mpi_type = 1
	208	#endif
	209	WRITE ( io, 101 ) mpi_type, coupling_mode
	210	ENDIF
[102]	211	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
	212	ADJUSTR( host_chr )
[1]	213	#if defined( __parallel )
	214	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
	215	char1 = 'calculated'
	216	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	217	host(1:2) == 'lc' ) .AND. &
	218	npex == -1 .AND. pdims(2) == 1 ) THEN
	219	char1 = 'forced'
	220	ELSE
	221	char1 = 'predefined'
	222	ENDIF
	223	IF ( threads_per_task == 1 ) THEN
[102]	224	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
[1]	225	ELSE
[102]	226	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
[1]	227	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
	228	ENDIF
	229	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	230	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
	231	npex == -1 .AND. pdims(2) == 1 ) &
	232	THEN
[102]	233	WRITE ( io, 106 )
[1]	234	ELSEIF ( pdims(2) == 1 ) THEN
[102]	235	WRITE ( io, 107 ) 'x'
[1]	236	ELSEIF ( pdims(1) == 1 ) THEN
[102]	237	WRITE ( io, 107 ) 'y'
[1]	238	ENDIF
[102]	239	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 105 )
[759]	240	IF ( numprocs /= maximum_parallel_io_streams ) THEN
	241	WRITE ( io, 108 ) maximum_parallel_io_streams
	242	ENDIF
[1]	243	#endif
	244	WRITE ( io, 99 )
	245
	246	!
	247	!-- Numerical schemes
	248	WRITE ( io, 110 )
	249	IF ( psolver(1:7) == 'poisfft' ) THEN
	250	WRITE ( io, 111 ) TRIM( fft_method )
	251	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
	252	ELSEIF ( psolver == 'sor' ) THEN
	253	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
	254	ELSEIF ( psolver == 'multigrid' ) THEN
	255	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
	256	IF ( mg_cycles == -1 ) THEN
	257	WRITE ( io, 140 ) residual_limit
	258	ELSE
	259	WRITE ( io, 141 ) mg_cycles
	260	ENDIF
	261	IF ( mg_switch_to_pe0_level == 0 ) THEN
	262	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	263	nzt_mg(1)
[197]	264	ELSEIF ( mg_switch_to_pe0_level /= -1 ) THEN
[1]	265	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
	266	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
	267	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
	268	nzt_mg(mg_switch_to_pe0_level), &
	269	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	270	nzt_mg(1)
	271	ENDIF
[927]	272	IF ( masking_method ) WRITE ( io, 144 )
[1]	273	ENDIF
	274	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
	275	THEN
	276	WRITE ( io, 142 )
	277	ENDIF
	278
	279	IF ( momentum_advec == 'pw-scheme' ) THEN
	280	WRITE ( io, 113 )
[667]	281	ELSEIF (momentum_advec == 'ws-scheme' ) THEN
	282	WRITE ( io, 503 )
	283	ELSEIF (momentum_advec == 'ups-scheme' ) THEN
[1]	284	WRITE ( io, 114 )
	285	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
	286	IF ( overshoot_limit_u /= 0.0 .OR. overshoot_limit_v /= 0.0 .OR. &
	287	overshoot_limit_w /= 0.0 ) THEN
	288	WRITE ( io, 127 ) overshoot_limit_u, overshoot_limit_v, &
	289	overshoot_limit_w
	290	ENDIF
	291	IF ( ups_limit_u /= 0.0 .OR. ups_limit_v /= 0.0 .OR. &
	292	ups_limit_w /= 0.0 ) &
	293	THEN
	294	WRITE ( io, 125 ) ups_limit_u, ups_limit_v, ups_limit_w
	295	ENDIF
	296	IF ( long_filter_factor /= 0.0 ) WRITE ( io, 115 ) long_filter_factor
	297	ENDIF
	298	IF ( scalar_advec == 'pw-scheme' ) THEN
	299	WRITE ( io, 116 )
[667]	300	ELSEIF ( scalar_advec == 'ws-scheme' ) THEN
	301	WRITE ( io, 504 )
[1]	302	ELSEIF ( scalar_advec == 'ups-scheme' ) THEN
	303	WRITE ( io, 117 )
	304	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
	305	IF ( overshoot_limit_e /= 0.0 .OR. overshoot_limit_pt /= 0.0 ) THEN
	306	WRITE ( io, 128 ) overshoot_limit_e, overshoot_limit_pt
	307	ENDIF
	308	IF ( ups_limit_e /= 0.0 .OR. ups_limit_pt /= 0.0 ) THEN
	309	WRITE ( io, 126 ) ups_limit_e, ups_limit_pt
	310	ENDIF
	311	ELSE
	312	WRITE ( io, 118 )
	313	ENDIF
[63]	314
	315	WRITE ( io, 139 ) TRIM( loop_optimization )
	316
[1]	317	IF ( galilei_transformation ) THEN
	318	IF ( use_ug_for_galilei_tr ) THEN
[868]	319	char1 = '0.6 * geostrophic wind'
[1]	320	ELSE
	321	char1 = 'mean wind in model domain'
	322	ENDIF
	323	IF ( simulated_time_at_begin == simulated_time ) THEN
	324	char2 = 'at the start of the run'
	325	ELSE
	326	char2 = 'at the end of the run'
	327	ENDIF
	328	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
	329	advected_distance_x/1000.0, advected_distance_y/1000.0
	330	ENDIF
	331	IF ( timestep_scheme == 'leapfrog' ) THEN
	332	WRITE ( io, 120 )
	333	ELSEIF ( timestep_scheme == 'leapfrog+euler' ) THEN
	334	WRITE ( io, 121 )
	335	ELSE
	336	WRITE ( io, 122 ) timestep_scheme
	337	ENDIF
[87]	338	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
[1]	339	IF ( rayleigh_damping_factor /= 0.0 ) THEN
[108]	340	IF ( .NOT. ocean ) THEN
	341	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
	342	rayleigh_damping_factor
	343	ELSE
	344	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
	345	rayleigh_damping_factor
	346	ENDIF
[1]	347	ENDIF
[75]	348	IF ( humidity ) THEN
[1]	349	IF ( .NOT. cloud_physics ) THEN
	350	WRITE ( io, 129 )
	351	ELSE
	352	WRITE ( io, 130 )
	353	ENDIF
	354	ENDIF
	355	IF ( passive_scalar ) WRITE ( io, 134 )
[240]	356	IF ( conserve_volume_flow ) THEN
[241]	357	WRITE ( io, 150 ) conserve_volume_flow_mode
	358	IF ( TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
	359	WRITE ( io, 151 ) u_bulk, v_bulk
	360	ENDIF
[240]	361	ELSEIF ( dp_external ) THEN
	362	IF ( dp_smooth ) THEN
[241]	363	WRITE ( io, 152 ) dpdxy, dp_level_b, ', vertically smoothed.'
[240]	364	ELSE
[241]	365	WRITE ( io, 152 ) dpdxy, dp_level_b, '.'
[240]	366	ENDIF
	367	ENDIF
[411]	368	IF ( large_scale_subsidence ) THEN
	369	WRITE ( io, 153 )
	370	WRITE ( io, 154 )
	371	ENDIF
[1]	372	WRITE ( io, 99 )
	373
	374	!
	375	!-- Runtime and timestep informations
	376	WRITE ( io, 200 )
	377	IF ( .NOT. dt_fixed ) THEN
	378	WRITE ( io, 201 ) dt_max, cfl_factor
	379	ELSE
	380	WRITE ( io, 202 ) dt
	381	ENDIF
	382	WRITE ( io, 203 ) simulated_time_at_begin, end_time
	383
	384	IF ( time_restart /= 9999999.9 .AND. &
	385	simulated_time_at_begin == simulated_time ) THEN
	386	IF ( dt_restart == 9999999.9 ) THEN
	387	WRITE ( io, 204 ) ' Restart at: ',time_restart
	388	ELSE
	389	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
	390	ENDIF
	391	ENDIF
	392
	393	IF ( simulated_time_at_begin /= simulated_time ) THEN
	394	i = MAX ( log_point_s(10)%counts, 1 )
	395	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
	396	cpuseconds_per_simulated_second = 0.0
	397	ELSE
	398	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
	399	( simulated_time - &
	400	simulated_time_at_begin )
	401	ENDIF
	402	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
	403	log_point_s(10)%sum / REAL( i ), &
	404	cpuseconds_per_simulated_second
	405	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
	406	IF ( dt_restart == 9999999.9 ) THEN
	407	WRITE ( io, 204 ) ' Next restart at: ',time_restart
	408	ELSE
	409	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
	410	ENDIF
	411	ENDIF
	412	ENDIF
	413
	414	!
[291]	415	!-- Start time for coupled runs, if independent precursor runs for atmosphere
	416	!-- and ocean are used. In this case, coupling_start_time defines the time
	417	!-- when the coupling is switched on.
	418	IF ( coupling_start_time /= 0.0 ) THEN
	419	IF ( coupling_start_time >= simulated_time_at_begin ) THEN
	420	char1 = 'Precursor run for a coupled atmosphere-ocean run'
	421	ELSE
	422	char1 = 'Coupled atmosphere-ocean run following independent ' // &
	423	'precursor runs'
	424	ENDIF
	425	WRITE ( io, 207 ) char1, coupling_start_time
	426	ENDIF
	427
	428	!
[1]	429	!-- Computational grid
[94]	430	IF ( .NOT. ocean ) THEN
	431	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
	432	IF ( dz_stretch_level_index < nzt+1 ) THEN
	433	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	434	dz_stretch_factor, dz_max
	435	ENDIF
	436	ELSE
	437	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(0)
	438	IF ( dz_stretch_level_index > 0 ) THEN
	439	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	440	dz_stretch_factor, dz_max
	441	ENDIF
[1]	442	ENDIF
	443	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
	444	MIN( nnz+2, nzt+2 )
[76]	445	IF ( numprocs > 1 ) THEN
	446	IF ( nxa == nx .AND. nya == ny .AND. nza == nz ) THEN
	447	WRITE ( io, 255 )
	448	ELSE
	449	WRITE ( io, 256 ) nnx-(nxa-nx), nny-(nya-ny), nzt+2
	450	ENDIF
[1]	451	ENDIF
	452	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
	453
	454	!
	455	!-- Topography
	456	WRITE ( io, 270 ) topography
	457	SELECT CASE ( TRIM( topography ) )
	458
	459	CASE ( 'flat' )
	460	! no actions necessary
	461
	462	CASE ( 'single_building' )
	463	blx = INT( building_length_x / dx )
	464	bly = INT( building_length_y / dy )
	465	bh = INT( building_height / dz )
	466
	467	IF ( building_wall_left == 9999999.9 ) THEN
	468	building_wall_left = ( nx + 1 - blx ) / 2 * dx
	469	ENDIF
	470	bxl = INT ( building_wall_left / dx + 0.5 )
	471	bxr = bxl + blx
	472
	473	IF ( building_wall_south == 9999999.9 ) THEN
	474	building_wall_south = ( ny + 1 - bly ) / 2 * dy
	475	ENDIF
	476	bys = INT ( building_wall_south / dy + 0.5 )
	477	byn = bys + bly
	478
	479	WRITE ( io, 271 ) building_length_x, building_length_y, &
	480	building_height, bxl, bxr, bys, byn
	481
[240]	482	CASE ( 'single_street_canyon' )
	483	ch = NINT( canyon_height / dz )
	484	IF ( canyon_width_x /= 9999999.9 ) THEN
	485	!
	486	!-- Street canyon in y direction
	487	cwx = NINT( canyon_width_x / dx )
	488	IF ( canyon_wall_left == 9999999.9 ) THEN
	489	canyon_wall_left = ( nx + 1 - cwx ) / 2 * dx
	490	ENDIF
	491	cxl = NINT( canyon_wall_left / dx )
	492	cxr = cxl + cwx
	493	WRITE ( io, 272 ) 'y', canyon_height, ch, 'u', cxl, cxr
	494
	495	ELSEIF ( canyon_width_y /= 9999999.9 ) THEN
	496	!
	497	!-- Street canyon in x direction
	498	cwy = NINT( canyon_width_y / dy )
	499	IF ( canyon_wall_south == 9999999.9 ) THEN
	500	canyon_wall_south = ( ny + 1 - cwy ) / 2 * dy
	501	ENDIF
	502	cys = NINT( canyon_wall_south / dy )
	503	cyn = cys + cwy
	504	WRITE ( io, 272 ) 'x', canyon_height, ch, 'v', cys, cyn
	505	ENDIF
	506
[1]	507	END SELECT
	508
[256]	509	IF ( TRIM( topography ) /= 'flat' ) THEN
	510	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
	511	IF ( TRIM( topography ) == 'single_building' .OR. &
	512	TRIM( topography ) == 'single_street_canyon' ) THEN
	513	WRITE ( io, 278 )
	514	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
	515	WRITE ( io, 279 )
	516	ENDIF
	517	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_edge' ) THEN
	518	WRITE ( io, 278 )
	519	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_center' ) THEN
	520	WRITE ( io, 279 )
	521	ENDIF
	522	ENDIF
	523
[138]	524	IF ( plant_canopy ) THEN
	525
	526	WRITE ( io, 280 ) canopy_mode, pch_index, drag_coefficient
[153]	527	IF ( passive_scalar ) THEN
	528	WRITE ( io, 281 ) scalar_exchange_coefficient, &
	529	leaf_surface_concentration
	530	ENDIF
[138]	531
[1]	532	!
[153]	533	!-- Heat flux at the top of vegetation
	534	WRITE ( io, 282 ) cthf
	535
	536	!
[138]	537	!-- Leaf area density profile
	538	!-- Building output strings, starting with surface value
[833]	539	WRITE ( learde, '(F6.4)' ) lad_surface
[138]	540	gradients = '------'
	541	slices = ' 0'
	542	coordinates = ' 0.0'
	543	i = 1
	544	DO WHILE ( lad_vertical_gradient_level_ind(i) /= -9999 )
	545
	546	WRITE (coor_chr,'(F7.2)') lad(lad_vertical_gradient_level_ind(i))
	547	learde = TRIM( learde ) // ' ' // TRIM( coor_chr )
	548
	549	WRITE (coor_chr,'(F7.2)') lad_vertical_gradient(i)
	550	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	551
	552	WRITE (coor_chr,'(I7)') lad_vertical_gradient_level_ind(i)
	553	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	554
	555	WRITE (coor_chr,'(F7.1)') lad_vertical_gradient_level(i)
	556	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	557
	558	i = i + 1
	559	ENDDO
	560
[153]	561	WRITE ( io, 283 ) TRIM( coordinates ), TRIM( learde ), &
[138]	562	TRIM( gradients ), TRIM( slices )
	563
	564	ENDIF
	565
	566	!
[1]	567	!-- Boundary conditions
	568	IF ( ibc_p_b == 0 ) THEN
	569	runten = 'p(0) = 0 \|'
	570	ELSEIF ( ibc_p_b == 1 ) THEN
	571	runten = 'p(0) = p(1) \|'
	572	ELSE
	573	runten = 'p(0) = p(1) +R\|'
	574	ENDIF
	575	IF ( ibc_p_t == 0 ) THEN
	576	roben = 'p(nzt+1) = 0 \|'
	577	ELSE
	578	roben = 'p(nzt+1) = p(nzt) \|'
	579	ENDIF
	580
	581	IF ( ibc_uv_b == 0 ) THEN
	582	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
	583	ELSE
	584	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
	585	ENDIF
[132]	586	IF ( TRIM( bc_uv_t ) == 'dirichlet_0' ) THEN
	587	roben = TRIM( roben ) // ' uv(nzt+1) = 0 \|'
	588	ELSEIF ( ibc_uv_t == 0 ) THEN
[1]	589	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
	590	ELSE
	591	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
	592	ENDIF
	593
	594	IF ( ibc_pt_b == 0 ) THEN
	595	runten = TRIM( runten ) // ' pt(0) = pt_surface'
[102]	596	ELSEIF ( ibc_pt_b == 1 ) THEN
[1]	597	runten = TRIM( runten ) // ' pt(0) = pt(1)'
[102]	598	ELSEIF ( ibc_pt_b == 2 ) THEN
	599	runten = TRIM( runten ) // ' pt(0) = from coupled model'
[1]	600	ENDIF
	601	IF ( ibc_pt_t == 0 ) THEN
[19]	602	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
	603	ELSEIF( ibc_pt_t == 1 ) THEN
	604	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
	605	ELSEIF( ibc_pt_t == 2 ) THEN
	606	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
[667]	607
[1]	608	ENDIF
	609
	610	WRITE ( io, 300 ) runten, roben
	611
	612	IF ( .NOT. constant_diffusion ) THEN
	613	IF ( ibc_e_b == 1 ) THEN
	614	runten = 'e(0) = e(1)'
	615	ELSE
	616	runten = 'e(0) = e(1) = (u/0.1)*2'
	617	ENDIF
	618	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
	619
[97]	620	WRITE ( io, 301 ) 'e', runten, roben
[1]	621
	622	ENDIF
	623
[97]	624	IF ( ocean ) THEN
	625	runten = 'sa(0) = sa(1)'
	626	IF ( ibc_sa_t == 0 ) THEN
	627	roben = 'sa(nzt+1) = sa_surface'
[1]	628	ELSE
[97]	629	roben = 'sa(nzt+1) = sa(nzt)'
[1]	630	ENDIF
[97]	631	WRITE ( io, 301 ) 'sa', runten, roben
	632	ENDIF
[1]	633
[97]	634	IF ( humidity ) THEN
	635	IF ( ibc_q_b == 0 ) THEN
	636	runten = 'q(0) = q_surface'
	637	ELSE
	638	runten = 'q(0) = q(1)'
	639	ENDIF
	640	IF ( ibc_q_t == 0 ) THEN
	641	roben = 'q(nzt) = q_top'
	642	ELSE
	643	roben = 'q(nzt) = q(nzt-1) + dq/dz'
	644	ENDIF
	645	WRITE ( io, 301 ) 'q', runten, roben
	646	ENDIF
[1]	647
[97]	648	IF ( passive_scalar ) THEN
	649	IF ( ibc_q_b == 0 ) THEN
	650	runten = 's(0) = s_surface'
	651	ELSE
	652	runten = 's(0) = s(1)'
	653	ENDIF
	654	IF ( ibc_q_t == 0 ) THEN
	655	roben = 's(nzt) = s_top'
	656	ELSE
	657	roben = 's(nzt) = s(nzt-1) + ds/dz'
	658	ENDIF
	659	WRITE ( io, 301 ) 's', runten, roben
[1]	660	ENDIF
	661
	662	IF ( use_surface_fluxes ) THEN
	663	WRITE ( io, 303 )
	664	IF ( constant_heatflux ) THEN
	665	WRITE ( io, 306 ) surface_heatflux
	666	IF ( random_heatflux ) WRITE ( io, 307 )
	667	ENDIF
[75]	668	IF ( humidity .AND. constant_waterflux ) THEN
[1]	669	WRITE ( io, 311 ) surface_waterflux
	670	ENDIF
	671	IF ( passive_scalar .AND. constant_waterflux ) THEN
	672	WRITE ( io, 313 ) surface_waterflux
	673	ENDIF
	674	ENDIF
	675
[19]	676	IF ( use_top_fluxes ) THEN
	677	WRITE ( io, 304 )
[102]	678	IF ( coupling_mode == 'uncoupled' ) THEN
[151]	679	WRITE ( io, 320 ) top_momentumflux_u, top_momentumflux_v
[102]	680	IF ( constant_top_heatflux ) THEN
	681	WRITE ( io, 306 ) top_heatflux
	682	ENDIF
	683	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	684	WRITE ( io, 316 )
[19]	685	ENDIF
[97]	686	IF ( ocean .AND. constant_top_salinityflux ) THEN
	687	WRITE ( io, 309 ) top_salinityflux
	688	ENDIF
[75]	689	IF ( humidity .OR. passive_scalar ) THEN
[19]	690	WRITE ( io, 315 )
	691	ENDIF
	692	ENDIF
	693
[1]	694	IF ( prandtl_layer ) THEN
[667]	695	WRITE ( io, 305 ) (zu(1)-zu(0)), roughness_length, kappa, &
[94]	696	rif_min, rif_max
[1]	697	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
[75]	698	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
[1]	699	WRITE ( io, 312 )
	700	ENDIF
	701	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
	702	WRITE ( io, 314 )
	703	ENDIF
	704	ELSE
	705	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
	706	WRITE ( io, 310 ) rif_min, rif_max
	707	ENDIF
	708	ENDIF
	709
	710	WRITE ( io, 317 ) bc_lr, bc_ns
[707]	711	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
[1]	712	WRITE ( io, 318 ) outflow_damping_width, km_damp_max
[151]	713	IF ( turbulent_inflow ) THEN
	714	WRITE ( io, 319 ) recycling_width, recycling_plane, &
	715	inflow_damping_height, inflow_damping_width
	716	ENDIF
[1]	717	ENDIF
	718
	719	!
	720	!-- Listing of 1D-profiles
[151]	721	WRITE ( io, 325 ) dt_dopr_listing
[1]	722	IF ( averaging_interval_pr /= 0.0 ) THEN
[151]	723	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
[1]	724	ENDIF
	725
	726	!
	727	!-- DATA output
	728	WRITE ( io, 330 )
	729	IF ( averaging_interval_pr /= 0.0 ) THEN
[151]	730	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
[1]	731	ENDIF
	732
	733	!
	734	!-- 1D-profiles
[346]	735	dopr_chr = 'Profile:'
[1]	736	IF ( dopr_n /= 0 ) THEN
	737	WRITE ( io, 331 )
	738
	739	output_format = ''
	740	IF ( netcdf_output ) THEN
[493]	741	IF ( netcdf_data_format == 1 ) THEN
	742	output_format = 'NetCDF classic'
[1]	743	ELSE
[493]	744	output_format = 'NetCDF 64bit offset'
[1]	745	ENDIF
	746	ENDIF
	747	IF ( profil_output ) THEN
	748	IF ( netcdf_output ) THEN
	749	output_format = TRIM( output_format ) // ' and profil'
	750	ELSE
	751	output_format = 'profil'
	752	ENDIF
	753	ENDIF
[292]	754	WRITE ( io, 344 ) output_format
[1]	755
	756	DO i = 1, dopr_n
	757	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
	758	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
	759	WRITE ( io, 332 ) dopr_chr
	760	dopr_chr = ' :'
	761	ENDIF
	762	ENDDO
	763
	764	IF ( dopr_chr /= '' ) THEN
	765	WRITE ( io, 332 ) dopr_chr
	766	ENDIF
	767	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
	768	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
	769	ENDIF
	770
	771	!
	772	!-- 2D-arrays
	773	DO av = 0, 1
	774
	775	i = 1
	776	do2d_xy = ''
	777	do2d_xz = ''
	778	do2d_yz = ''
	779	DO WHILE ( do2d(av,i) /= ' ' )
	780
	781	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
	782	do2d_mode = do2d(av,i)(l-1:l)
	783
	784	SELECT CASE ( do2d_mode )
	785	CASE ( 'xy' )
	786	ll = LEN_TRIM( do2d_xy )
	787	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	788	CASE ( 'xz' )
	789	ll = LEN_TRIM( do2d_xz )
	790	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	791	CASE ( 'yz' )
	792	ll = LEN_TRIM( do2d_yz )
	793	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	794	END SELECT
	795
	796	i = i + 1
	797
	798	ENDDO
	799
	800	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
	801	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
	802	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
	803	( netcdf_output .OR. iso2d_output ) ) THEN
	804
	805	IF ( av == 0 ) THEN
	806	WRITE ( io, 334 ) ''
	807	ELSE
	808	WRITE ( io, 334 ) '(time-averaged)'
	809	ENDIF
	810
	811	IF ( do2d_at_begin ) THEN
	812	begin_chr = 'and at the start'
	813	ELSE
	814	begin_chr = ''
	815	ENDIF
	816
	817	output_format = ''
	818	IF ( netcdf_output ) THEN
[493]	819	IF ( netcdf_data_format == 1 ) THEN
	820	output_format = 'NetCDF classic'
	821	ELSEIF ( netcdf_data_format == 2 ) THEN
	822	output_format = 'NetCDF 64bit offset'
	823	ELSEIF ( netcdf_data_format == 3 ) THEN
	824	output_format = 'NetCDF4/HDF5'
	825	ELSEIF ( netcdf_data_format == 4 ) THEN
	826	output_format = 'NetCDF4/HDF5 clasic'
[1]	827	ENDIF
	828	ENDIF
	829	IF ( iso2d_output ) THEN
	830	IF ( netcdf_output ) THEN
	831	output_format = TRIM( output_format ) // ' and iso2d'
	832	ELSE
	833	output_format = 'iso2d'
	834	ENDIF
	835	ENDIF
[292]	836	WRITE ( io, 344 ) output_format
[1]	837
	838	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
	839	i = 1
	840	slices = '/'
	841	coordinates = '/'
	842	!
	843	!-- Building strings with index and coordinate informations of the
	844	!-- slices
	845	DO WHILE ( section(i,1) /= -9999 )
	846
	847	WRITE (section_chr,'(I5)') section(i,1)
	848	section_chr = ADJUSTL( section_chr )
	849	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	850
[206]	851	IF ( section(i,1) == -1 ) THEN
	852	WRITE (coor_chr,'(F10.1)') -1.0
	853	ELSE
	854	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
	855	ENDIF
[1]	856	coor_chr = ADJUSTL( coor_chr )
	857	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	858
	859	i = i + 1
	860	ENDDO
	861	IF ( av == 0 ) THEN
	862	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
	863	TRIM( begin_chr ), 'k', TRIM( slices ), &
	864	TRIM( coordinates )
	865	IF ( skip_time_do2d_xy /= 0.0 ) THEN
	866	WRITE ( io, 339 ) skip_time_do2d_xy
	867	ENDIF
	868	ELSE
	869	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
	870	TRIM( begin_chr ), averaging_interval, &
	871	dt_averaging_input, 'k', TRIM( slices ), &
	872	TRIM( coordinates )
	873	IF ( skip_time_data_output_av /= 0.0 ) THEN
	874	WRITE ( io, 339 ) skip_time_data_output_av
	875	ENDIF
	876	ENDIF
	877
	878	ENDIF
	879
	880	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
	881	i = 1
	882	slices = '/'
	883	coordinates = '/'
	884	!
	885	!-- Building strings with index and coordinate informations of the
	886	!-- slices
	887	DO WHILE ( section(i,2) /= -9999 )
	888
	889	WRITE (section_chr,'(I5)') section(i,2)
	890	section_chr = ADJUSTL( section_chr )
	891	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	892
	893	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
	894	coor_chr = ADJUSTL( coor_chr )
	895	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	896
	897	i = i + 1
	898	ENDDO
	899	IF ( av == 0 ) THEN
	900	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
	901	TRIM( begin_chr ), 'j', TRIM( slices ), &
	902	TRIM( coordinates )
	903	IF ( skip_time_do2d_xz /= 0.0 ) THEN
	904	WRITE ( io, 339 ) skip_time_do2d_xz
	905	ENDIF
	906	ELSE
	907	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
	908	TRIM( begin_chr ), averaging_interval, &
	909	dt_averaging_input, 'j', TRIM( slices ), &
	910	TRIM( coordinates )
	911	IF ( skip_time_data_output_av /= 0.0 ) THEN
	912	WRITE ( io, 339 ) skip_time_data_output_av
	913	ENDIF
	914	ENDIF
	915	ENDIF
	916
	917	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
	918	i = 1
	919	slices = '/'
	920	coordinates = '/'
	921	!
	922	!-- Building strings with index and coordinate informations of the
	923	!-- slices
	924	DO WHILE ( section(i,3) /= -9999 )
	925
	926	WRITE (section_chr,'(I5)') section(i,3)
	927	section_chr = ADJUSTL( section_chr )
	928	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	929
	930	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
	931	coor_chr = ADJUSTL( coor_chr )
	932	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	933
	934	i = i + 1
	935	ENDDO
	936	IF ( av == 0 ) THEN
	937	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
	938	TRIM( begin_chr ), 'i', TRIM( slices ), &
	939	TRIM( coordinates )
	940	IF ( skip_time_do2d_yz /= 0.0 ) THEN
	941	WRITE ( io, 339 ) skip_time_do2d_yz
	942	ENDIF
	943	ELSE
	944	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
	945	TRIM( begin_chr ), averaging_interval, &
	946	dt_averaging_input, 'i', TRIM( slices ), &
	947	TRIM( coordinates )
	948	IF ( skip_time_data_output_av /= 0.0 ) THEN
	949	WRITE ( io, 339 ) skip_time_data_output_av
	950	ENDIF
	951	ENDIF
	952	ENDIF
	953
	954	ENDIF
	955
	956	ENDDO
	957
	958	!
	959	!-- 3d-arrays
	960	DO av = 0, 1
	961
	962	i = 1
	963	do3d_chr = ''
	964	DO WHILE ( do3d(av,i) /= ' ' )
	965
	966	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
	967	i = i + 1
	968
	969	ENDDO
	970
	971	IF ( do3d_chr /= '' ) THEN
	972	IF ( av == 0 ) THEN
	973	WRITE ( io, 336 ) ''
	974	ELSE
	975	WRITE ( io, 336 ) '(time-averaged)'
	976	ENDIF
	977
	978	output_format = ''
	979	IF ( netcdf_output ) THEN
[493]	980	IF ( netcdf_data_format == 1 ) THEN
	981	output_format = 'NetCDF classic'
	982	ELSEIF ( netcdf_data_format == 2 ) THEN
	983	output_format = 'NetCDF 64bit offset'
	984	ELSEIF ( netcdf_data_format == 3 ) THEN
	985	output_format = 'NetCDF4/HDF5'
	986	ELSEIF ( netcdf_data_format == 4 ) THEN
	987	output_format = 'NetCDF4/HDF5 clasic'
[1]	988	ENDIF
	989	ENDIF
	990	IF ( avs_output ) THEN
	991	IF ( netcdf_output ) THEN
	992	output_format = TRIM( output_format ) // ' and avs'
	993	ELSE
	994	output_format = 'avs'
	995	ENDIF
	996	ENDIF
[292]	997	WRITE ( io, 344 ) output_format
[1]	998
	999	IF ( do3d_at_begin ) THEN
	1000	begin_chr = 'and at the start'
	1001	ELSE
	1002	begin_chr = ''
	1003	ENDIF
	1004	IF ( av == 0 ) THEN
	1005	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
	1006	zu(nz_do3d), nz_do3d
	1007	ELSE
	1008	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
	1009	TRIM( begin_chr ), averaging_interval, &
	1010	dt_averaging_input, zu(nz_do3d), nz_do3d
	1011	ENDIF
	1012
	1013	IF ( do3d_compress ) THEN
	1014	do3d_chr = ''
	1015	i = 1
	1016	DO WHILE ( do3d(av,i) /= ' ' )
	1017
	1018	SELECT CASE ( do3d(av,i) )
	1019	CASE ( 'u' )
	1020	j = 1
	1021	CASE ( 'v' )
	1022	j = 2
	1023	CASE ( 'w' )
	1024	j = 3
	1025	CASE ( 'p' )
	1026	j = 4
	1027	CASE ( 'pt' )
	1028	j = 5
	1029	END SELECT
	1030	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
	1031	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
	1032	':' // prec // ','
	1033	i = i + 1
	1034
	1035	ENDDO
	1036	WRITE ( io, 338 ) do3d_chr
	1037
	1038	ENDIF
	1039
	1040	IF ( av == 0 ) THEN
	1041	IF ( skip_time_do3d /= 0.0 ) THEN
	1042	WRITE ( io, 339 ) skip_time_do3d
	1043	ENDIF
	1044	ELSE
	1045	IF ( skip_time_data_output_av /= 0.0 ) THEN
	1046	WRITE ( io, 339 ) skip_time_data_output_av
	1047	ENDIF
	1048	ENDIF
	1049
	1050	ENDIF
	1051
	1052	ENDDO
	1053
	1054	!
[410]	1055	!-- masked arrays
	1056	IF ( masks > 0 ) WRITE ( io, 345 ) &
	1057	mask_scale_x, mask_scale_y, mask_scale_z
	1058	DO mid = 1, masks
	1059	DO av = 0, 1
	1060
	1061	i = 1
	1062	domask_chr = ''
	1063	DO WHILE ( domask(mid,av,i) /= ' ' )
	1064	domask_chr = TRIM( domask_chr ) // ' ' // &
	1065	TRIM( domask(mid,av,i) ) // ','
	1066	i = i + 1
	1067	ENDDO
	1068
	1069	IF ( domask_chr /= '' ) THEN
	1070	IF ( av == 0 ) THEN
	1071	WRITE ( io, 346 ) '', mid
	1072	ELSE
	1073	WRITE ( io, 346 ) ' (time-averaged)', mid
	1074	ENDIF
	1075
	1076	output_format = ''
	1077	IF ( netcdf_output ) THEN
[493]	1078	IF ( netcdf_data_format == 1 ) THEN
	1079	output_format = 'NetCDF classic'
	1080	ELSEIF ( netcdf_data_format == 2 ) THEN
	1081	output_format = 'NetCDF 64bit offset'
	1082	ELSEIF ( netcdf_data_format == 3 ) THEN
	1083	output_format = 'NetCDF4/HDF5'
	1084	ELSEIF ( netcdf_data_format == 4 ) THEN
	1085	output_format = 'NetCDF4/HDF5 clasic'
	1086	ENDIF
[410]	1087	ENDIF
	1088	WRITE ( io, 344 ) output_format
	1089
	1090	IF ( av == 0 ) THEN
	1091	WRITE ( io, 347 ) domask_chr, dt_domask(mid)
	1092	ELSE
	1093	WRITE ( io, 348 ) domask_chr, dt_data_output_av, &
	1094	averaging_interval, dt_averaging_input
	1095	ENDIF
	1096
	1097	IF ( av == 0 ) THEN
	1098	IF ( skip_time_domask(mid) /= 0.0 ) THEN
	1099	WRITE ( io, 339 ) skip_time_domask(mid)
	1100	ENDIF
	1101	ELSE
	1102	IF ( skip_time_data_output_av /= 0.0 ) THEN
	1103	WRITE ( io, 339 ) skip_time_data_output_av
	1104	ENDIF
	1105	ENDIF
	1106	!
	1107	!-- output locations
	1108	DO dim = 1, 3
	1109	IF ( mask(mid,dim,1) >= 0.0 ) THEN
	1110	count = 0
	1111	DO WHILE ( mask(mid,dim,count+1) >= 0.0 )
	1112	count = count + 1
	1113	ENDDO
	1114	WRITE ( io, 349 ) dir(dim), dir(dim), mid, dir(dim), &
	1115	mask(mid,dim,:count)
	1116	ELSEIF ( mask_loop(mid,dim,1) < 0.0 .AND. &
	1117	mask_loop(mid,dim,2) < 0.0 .AND. &
	1118	mask_loop(mid,dim,3) == 0.0 ) THEN
	1119	WRITE ( io, 350 ) dir(dim), dir(dim)
	1120	ELSEIF ( mask_loop(mid,dim,3) == 0.0 ) THEN
	1121	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
	1122	mask_loop(mid,dim,1:2)
	1123	ELSE
	1124	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
	1125	mask_loop(mid,dim,1:3)
	1126	ENDIF
	1127	ENDDO
	1128	ENDIF
	1129
	1130	ENDDO
	1131	ENDDO
	1132
	1133	!
[1]	1134	!-- Timeseries
	1135	IF ( dt_dots /= 9999999.9 ) THEN
	1136	WRITE ( io, 340 )
	1137
	1138	output_format = ''
	1139	IF ( netcdf_output ) THEN
[493]	1140	IF ( netcdf_data_format == 1 ) THEN
	1141	output_format = 'NetCDF classic'
[1]	1142	ELSE
[493]	1143	output_format = 'NetCDF 64bit offset'
[1]	1144	ENDIF
	1145	ENDIF
	1146	IF ( profil_output ) THEN
	1147	IF ( netcdf_output ) THEN
	1148	output_format = TRIM( output_format ) // ' and profil'
	1149	ELSE
	1150	output_format = 'profil'
	1151	ENDIF
	1152	ENDIF
[292]	1153	WRITE ( io, 344 ) output_format
[1]	1154	WRITE ( io, 341 ) dt_dots
	1155	ENDIF
	1156
	1157	#if defined( __dvrp_graphics )
	1158	!
	1159	!-- Dvrp-output
	1160	IF ( dt_dvrp /= 9999999.9 ) THEN
	1161	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
	1162	TRIM( dvrp_username ), TRIM( dvrp_directory )
	1163	i = 1
	1164	l = 0
[336]	1165	m = 0
[1]	1166	DO WHILE ( mode_dvrp(i) /= ' ' )
	1167	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
[130]	1168	READ ( mode_dvrp(i), '(10X,I2)' ) j
[1]	1169	l = l + 1
	1170	IF ( do3d(0,j) /= ' ' ) THEN
[336]	1171	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l), &
	1172	isosurface_color(:,l)
[1]	1173	ENDIF
	1174	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
[130]	1175	READ ( mode_dvrp(i), '(6X,I2)' ) j
[336]	1176	m = m + 1
	1177	IF ( do2d(0,j) /= ' ' ) THEN
	1178	WRITE ( io, 362 ) TRIM( do2d(0,j) ), &
	1179	slicer_range_limits_dvrp(:,m)
	1180	ENDIF
[1]	1181	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
[336]	1182	WRITE ( io, 363 ) dvrp_psize
	1183	IF ( particle_dvrpsize /= 'none' ) THEN
	1184	WRITE ( io, 364 ) 'size', TRIM( particle_dvrpsize ), &
	1185	dvrpsize_interval
	1186	ENDIF
	1187	IF ( particle_color /= 'none' ) THEN
	1188	WRITE ( io, 364 ) 'color', TRIM( particle_color ), &
	1189	color_interval
	1190	ENDIF
[1]	1191	ENDIF
	1192	i = i + 1
	1193	ENDDO
[237]	1194
[336]	1195	WRITE ( io, 365 ) groundplate_color, superelevation_x, &
	1196	superelevation_y, superelevation, clip_dvrp_l, &
	1197	clip_dvrp_r, clip_dvrp_s, clip_dvrp_n
	1198
	1199	IF ( TRIM( topography ) /= 'flat' ) THEN
	1200	WRITE ( io, 366 ) topography_color
	1201	IF ( cluster_size > 1 ) THEN
	1202	WRITE ( io, 367 ) cluster_size
	1203	ENDIF
[237]	1204	ENDIF
	1205
[1]	1206	ENDIF
	1207	#endif
	1208
	1209	#if defined( __spectra )
	1210	!
	1211	!-- Spectra output
	1212	IF ( dt_dosp /= 9999999.9 ) THEN
	1213	WRITE ( io, 370 )
	1214
	1215	output_format = ''
	1216	IF ( netcdf_output ) THEN
[493]	1217	IF ( netcdf_data_format == 1 ) THEN
	1218	output_format = 'NetCDF classic'
[1]	1219	ELSE
[493]	1220	output_format = 'NetCDF 64bit offset'
[1]	1221	ENDIF
	1222	ENDIF
	1223	IF ( profil_output ) THEN
	1224	IF ( netcdf_output ) THEN
	1225	output_format = TRIM( output_format ) // ' and profil'
	1226	ELSE
	1227	output_format = 'profil'
	1228	ENDIF
	1229	ENDIF
[292]	1230	WRITE ( io, 344 ) output_format
[1]	1231	WRITE ( io, 371 ) dt_dosp
	1232	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
	1233	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
	1234	( spectra_direction(i), i = 1,10 ), &
[189]	1235	( comp_spectra_level(i), i = 1,100 ), &
	1236	( plot_spectra_level(i), i = 1,100 ), &
[1]	1237	averaging_interval_sp, dt_averaging_input_pr
	1238	ENDIF
	1239	#endif
	1240
	1241	WRITE ( io, 99 )
	1242
	1243	!
	1244	!-- Physical quantities
	1245	WRITE ( io, 400 )
	1246
	1247	!
	1248	!-- Geostrophic parameters
	1249	WRITE ( io, 410 ) omega, phi, f, fs
	1250
	1251	!
	1252	!-- Other quantities
	1253	WRITE ( io, 411 ) g
[97]	1254	IF ( use_reference ) THEN
	1255	IF ( ocean ) THEN
	1256	WRITE ( io, 412 ) prho_reference
	1257	ELSE
	1258	WRITE ( io, 413 ) pt_reference
	1259	ENDIF
	1260	ENDIF
[1]	1261
	1262	!
	1263	!-- Cloud physics parameters
	1264	IF ( cloud_physics ) THEN
[57]	1265	WRITE ( io, 415 )
	1266	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
[1]	1267	ENDIF
	1268
	1269	!-- Profile of the geostrophic wind (component ug)
	1270	!-- Building output strings
	1271	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
	1272	gradients = '------'
	1273	slices = ' 0'
	1274	coordinates = ' 0.0'
	1275	i = 1
	1276	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
	1277
[167]	1278	WRITE (coor_chr,'(F6.2,1X)') ug(ug_vertical_gradient_level_ind(i))
[1]	1279	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
	1280
[167]	1281	WRITE (coor_chr,'(F6.2,1X)') ug_vertical_gradient(i)
[1]	1282	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1283
[167]	1284	WRITE (coor_chr,'(I6,1X)') ug_vertical_gradient_level_ind(i)
[1]	1285	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1286
[167]	1287	WRITE (coor_chr,'(F6.1,1X)') ug_vertical_gradient_level(i)
[1]	1288	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1289
[430]	1290	IF ( i == 10 ) THEN
	1291	EXIT
	1292	ELSE
	1293	i = i + 1
	1294	ENDIF
	1295
[1]	1296	ENDDO
	1297
	1298	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
	1299	TRIM( gradients ), TRIM( slices )
	1300
	1301	!-- Profile of the geostrophic wind (component vg)
	1302	!-- Building output strings
	1303	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
	1304	gradients = '------'
	1305	slices = ' 0'
	1306	coordinates = ' 0.0'
	1307	i = 1
	1308	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
	1309
[167]	1310	WRITE (coor_chr,'(F6.2,1X)') vg(vg_vertical_gradient_level_ind(i))
[1]	1311	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
	1312
[167]	1313	WRITE (coor_chr,'(F6.2,1X)') vg_vertical_gradient(i)
[1]	1314	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1315
[167]	1316	WRITE (coor_chr,'(I6,1X)') vg_vertical_gradient_level_ind(i)
[1]	1317	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1318
[167]	1319	WRITE (coor_chr,'(F6.1,1X)') vg_vertical_gradient_level(i)
[1]	1320	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1321
[430]	1322	IF ( i == 10 ) THEN
	1323	EXIT
	1324	ELSE
	1325	i = i + 1
	1326	ENDIF
	1327
[1]	1328	ENDDO
	1329
	1330	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
	1331	TRIM( gradients ), TRIM( slices )
	1332
	1333	!
[767]	1334	!-- Initial wind profiles
	1335	IF ( u_profile(1) /= 9999999.9 ) WRITE ( io, 427 )
	1336
	1337	!
[1]	1338	!-- Initial temperature profile
	1339	!-- Building output strings, starting with surface temperature
	1340	WRITE ( temperatures, '(F6.2)' ) pt_surface
	1341	gradients = '------'
	1342	slices = ' 0'
	1343	coordinates = ' 0.0'
	1344	i = 1
	1345	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
	1346
[94]	1347	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
	1348	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
[1]	1349
[94]	1350	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
	1351	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
[1]	1352
[94]	1353	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
	1354	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
[1]	1355
[94]	1356	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
	1357	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
[1]	1358
[430]	1359	IF ( i == 10 ) THEN
	1360	EXIT
	1361	ELSE
	1362	i = i + 1
	1363	ENDIF
	1364
[1]	1365	ENDDO
	1366
	1367	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
	1368	TRIM( gradients ), TRIM( slices )
	1369
	1370	!
	1371	!-- Initial humidity profile
	1372	!-- Building output strings, starting with surface humidity
[75]	1373	IF ( humidity .OR. passive_scalar ) THEN
[1]	1374	WRITE ( temperatures, '(E8.1)' ) q_surface
	1375	gradients = '--------'
	1376	slices = ' 0'
	1377	coordinates = ' 0.0'
	1378	i = 1
	1379	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
	1380
	1381	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
	1382	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1383
	1384	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
	1385	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1386
	1387	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
	1388	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1389
	1390	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
	1391	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1392
[430]	1393	IF ( i == 10 ) THEN
	1394	EXIT
	1395	ELSE
	1396	i = i + 1
	1397	ENDIF
	1398
[1]	1399	ENDDO
	1400
[75]	1401	IF ( humidity ) THEN
[1]	1402	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
	1403	TRIM( gradients ), TRIM( slices )
	1404	ELSE
	1405	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
	1406	TRIM( gradients ), TRIM( slices )
	1407	ENDIF
	1408	ENDIF
	1409
	1410	!
[97]	1411	!-- Initial salinity profile
	1412	!-- Building output strings, starting with surface salinity
	1413	IF ( ocean ) THEN
	1414	WRITE ( temperatures, '(F6.2)' ) sa_surface
	1415	gradients = '------'
	1416	slices = ' 0'
	1417	coordinates = ' 0.0'
	1418	i = 1
	1419	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
	1420
	1421	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
	1422	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1423
	1424	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
	1425	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1426
	1427	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
	1428	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1429
	1430	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
	1431	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1432
[430]	1433	IF ( i == 10 ) THEN
	1434	EXIT
	1435	ELSE
	1436	i = i + 1
	1437	ENDIF
	1438
[97]	1439	ENDDO
	1440
	1441	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
	1442	TRIM( gradients ), TRIM( slices )
	1443	ENDIF
	1444
	1445	!
[411]	1446	!-- Profile for the large scale vertial velocity
	1447	!-- Building output strings, starting with surface value
	1448	IF ( large_scale_subsidence ) THEN
	1449	temperatures = ' 0.0'
	1450	gradients = '------'
	1451	slices = ' 0'
	1452	coordinates = ' 0.0'
	1453	i = 1
[580]	1454	DO WHILE ( subs_vertical_gradient_level_i(i) /= -9999 )
[411]	1455
	1456	WRITE (coor_chr,'(E10.2,7X)') &
[580]	1457	w_subs(subs_vertical_gradient_level_i(i))
[411]	1458	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1459
[580]	1460	WRITE (coor_chr,'(E10.2,7X)') subs_vertical_gradient(i)
[411]	1461	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1462
[580]	1463	WRITE (coor_chr,'(I10,7X)') subs_vertical_gradient_level_i(i)
[411]	1464	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1465
[580]	1466	WRITE (coor_chr,'(F10.2,7X)') subs_vertical_gradient_level(i)
[411]	1467	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1468
[430]	1469	IF ( i == 10 ) THEN
	1470	EXIT
	1471	ELSE
	1472	i = i + 1
	1473	ENDIF
	1474
[411]	1475	ENDDO
	1476
	1477	WRITE ( io, 426 ) TRIM( coordinates ), TRIM( temperatures ), &
	1478	TRIM( gradients ), TRIM( slices )
	1479	ENDIF
	1480
	1481	!
[824]	1482	!-- Cloud physcis parameters / quantities / numerical methods
	1483	WRITE ( io, 430 )
	1484	IF ( humidity .AND. .NOT. cloud_physics .AND. .NOT. cloud_droplets) THEN
	1485	WRITE ( io, 431 )
	1486	ELSEIF ( humidity .AND. cloud_physics ) THEN
	1487	WRITE ( io, 432 )
	1488	IF ( radiation ) WRITE ( io, 132 )
	1489	IF ( precipitation ) WRITE ( io, 133 )
	1490	ELSEIF ( humidity .AND. cloud_droplets ) THEN
	1491	WRITE ( io, 433 )
	1492	IF ( curvature_solution_effects ) WRITE ( io, 434 )
[825]	1493	IF ( collision_kernel /= 'none' ) THEN
	1494	WRITE ( io, 435 ) TRIM( collision_kernel )
[828]	1495	IF ( collision_kernel(6:9) == 'fast' ) THEN
	1496	WRITE ( io, 436 ) radius_classes, dissipation_classes
	1497	ENDIF
[825]	1498	ELSE
[828]	1499	WRITE ( io, 437 )
[825]	1500	ENDIF
[824]	1501	ENDIF
	1502
	1503	!
[1]	1504	!-- LES / turbulence parameters
	1505	WRITE ( io, 450 )
	1506
	1507	!--
	1508	! ... LES-constants used must still be added here
	1509	!--
	1510	IF ( constant_diffusion ) THEN
	1511	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
	1512	prandtl_number
	1513	ENDIF
	1514	IF ( .NOT. constant_diffusion) THEN
[108]	1515	IF ( e_init > 0.0 ) WRITE ( io, 455 ) e_init
[1]	1516	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
	1517	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
	1518	IF ( adjust_mixing_length .AND. prandtl_layer ) WRITE ( io, 452 )
	1519	ENDIF
	1520
	1521	!
	1522	!-- Special actions during the run
	1523	WRITE ( io, 470 )
	1524	IF ( create_disturbances ) THEN
	1525	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
	1526	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
	1527	zu(disturbance_level_ind_t), disturbance_level_ind_t
[707]	1528	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
[1]	1529	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
	1530	ELSE
	1531	WRITE ( io, 473 ) disturbance_energy_limit
	1532	ENDIF
	1533	WRITE ( io, 474 ) TRIM( random_generator )
	1534	ENDIF
	1535	IF ( pt_surface_initial_change /= 0.0 ) THEN
	1536	WRITE ( io, 475 ) pt_surface_initial_change
	1537	ENDIF
[75]	1538	IF ( humidity .AND. q_surface_initial_change /= 0.0 ) THEN
[1]	1539	WRITE ( io, 476 ) q_surface_initial_change
	1540	ENDIF
	1541	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
	1542	WRITE ( io, 477 ) q_surface_initial_change
	1543	ENDIF
	1544
[60]	1545	IF ( particle_advection ) THEN
[1]	1546	!
[60]	1547	!-- Particle attributes
	1548	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
	1549	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
[117]	1550	end_time_prel, dt_sort_particles
[60]	1551	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
	1552	IF ( random_start_position ) WRITE ( io, 481 )
	1553	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
	1554	WRITE ( io, 495 ) total_number_of_particles
[824]	1555	IF ( use_particle_tails .AND. maximum_number_of_tailpoints /= 0 ) THEN
[60]	1556	WRITE ( io, 483 ) maximum_number_of_tailpoints
	1557	IF ( minimum_tailpoint_distance /= 0 ) THEN
	1558	WRITE ( io, 484 ) total_number_of_tails, &
	1559	minimum_tailpoint_distance, &
	1560	maximum_tailpoint_age
	1561	ENDIF
[1]	1562	ENDIF
[60]	1563	IF ( dt_write_particle_data /= 9999999.9 ) THEN
	1564	WRITE ( io, 485 ) dt_write_particle_data
	1565	output_format = ''
	1566	IF ( netcdf_output ) THEN
[493]	1567	IF ( netcdf_data_format > 1 ) THEN
[60]	1568	output_format = 'netcdf (64 bit offset) and binary'
	1569	ELSE
	1570	output_format = 'netcdf and binary'
	1571	ENDIF
[1]	1572	ELSE
[60]	1573	output_format = 'binary'
[1]	1574	ENDIF
[292]	1575	WRITE ( io, 344 ) output_format
[1]	1576	ENDIF
[60]	1577	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
	1578	IF ( write_particle_statistics ) WRITE ( io, 486 )
[1]	1579
[60]	1580	WRITE ( io, 487 ) number_of_particle_groups
[1]	1581
[60]	1582	DO i = 1, number_of_particle_groups
	1583	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
	1584	WRITE ( io, 490 ) i, 0.0
	1585	WRITE ( io, 492 )
[1]	1586	ELSE
[60]	1587	WRITE ( io, 490 ) i, radius(i)
	1588	IF ( density_ratio(i) /= 0.0 ) THEN
	1589	WRITE ( io, 491 ) density_ratio(i)
	1590	ELSE
	1591	WRITE ( io, 492 )
	1592	ENDIF
[1]	1593	ENDIF
[60]	1594	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
	1595	pdx(i), pdy(i), pdz(i)
[336]	1596	IF ( .NOT. vertical_particle_advection(i) ) WRITE ( io, 482 )
[60]	1597	ENDDO
[1]	1598
[60]	1599	ENDIF
[1]	1600
[60]	1601
[1]	1602	!
	1603	!-- Parameters of 1D-model
	1604	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
	1605	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
	1606	mixing_length_1d, dissipation_1d
	1607	IF ( damp_level_ind_1d /= nzt+1 ) THEN
	1608	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
	1609	ENDIF
	1610	ENDIF
	1611
	1612	!
	1613	!-- User-defined informations
	1614	CALL user_header( io )
	1615
	1616	WRITE ( io, 99 )
	1617
	1618	!
	1619	!-- Write buffer contents to disc immediately
[82]	1620	CALL local_flush( io )
[1]	1621
	1622	!
	1623	!-- Here the FORMATs start
	1624
	1625	99 FORMAT (1X,78('-'))
[200]	1626	100 FORMAT (/1X,'***************************',9X,42('-')/ &
	1627	1X,'* ',A,' *',9X,A/ &
	1628	1X,'***************************',9X,42('-'))
[291]	1629	101 FORMAT (37X,'coupled run using MPI-',I1,': ',A/ &
[102]	1630	37X,42('-'))
[200]	1631	102 FORMAT (/' Date: ',A8,9X,'Run: ',A20/ &
	1632	' Time: ',A8,9X,'Run-No.: ',I2.2/ &
	1633	' Run on host: ',A10)
[1]	1634	#if defined( __parallel )
[200]	1635	103 FORMAT (' Number of PEs:',8X,I5,9X,'Processor grid (x,y): (',I3,',',I3, &
[1]	1636	')',1X,A)
[200]	1637	104 FORMAT (' Number of PEs:',8X,I5,9X,'Tasks:',I4,' threads per task:',I4/ &
[1]	1638	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
[102]	1639	105 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
	1640	106 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
[1]	1641	37X,'because the job is running on an SMP-cluster')
[102]	1642	107 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
[759]	1643	108 FORMAT (37X,'Max. # of parallel I/O streams is ',I5)
[1]	1644	#endif
	1645	110 FORMAT (/' Numerical Schemes:'/ &
	1646	' -----------------'/)
	1647	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
	1648	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
	1649	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
	1650	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
	1651	' or Upstream')
	1652	114 FORMAT (' --> Momentum advection via Upstream-Spline-Scheme')
	1653	115 FORMAT (' Tendencies are smoothed via Long-Filter with factor ',F5.3)
	1654	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
	1655	' or Upstream')
	1656	117 FORMAT (' --> Scalar advection via Upstream-Spline-Scheme')
	1657	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
	1658	119 FORMAT (' --> Galilei-Transform applied to horizontal advection', &
	1659	' Translation velocity = ',A/ &
	1660	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
	1661	120 FORMAT (' --> Time differencing scheme: leapfrog only (no euler in case', &
	1662	' of timestep changes)')
	1663	121 FORMAT (' --> Time differencing scheme: leapfrog + euler in case of', &
	1664	' timestep changes')
	1665	122 FORMAT (' --> Time differencing scheme: ',A)
[108]	1666	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
[1]	1667	' maximum damping coefficient: ',F5.3, ' 1/s')
	1668	124 FORMAT (' Spline-overshoots are being suppressed')
	1669	125 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
	1670	' of'/ &
	1671	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
	1672	126 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
	1673	' of'/ &
	1674	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
	1675	127 FORMAT (' The following absolute overshoot differences are tolerated:'/&
	1676	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
	1677	128 FORMAT (' The following absolute overshoot differences are tolerated:'/&
	1678	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
	1679	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
	1680	130 FORMAT (' --> Additional prognostic equation for the total water content')
[824]	1681	132 FORMAT (' Parameterization of long-wave radiation processes via'/ &
[1]	1682	' effective emissivity scheme')
[824]	1683	133 FORMAT (' Precipitation parameterization via Kessler-Scheme')
[1]	1684	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
	1685	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
	1686	A,'-cycle)'/ &
	1687	' number of grid levels: ',I2/ &
	1688	' Gauss-Seidel red/black iterations: ',I2)
	1689	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1690	I3,')')
	1691	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
	1692	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1693	I3,')'/ &
	1694	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
	1695	I3,')')
	1696	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
[63]	1697	139 FORMAT (' --> Loop optimization method: ',A)
[1]	1698	140 FORMAT (' maximum residual allowed: ',E10.3)
	1699	141 FORMAT (' fixed number of multigrid cycles: ',I4)
	1700	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
	1701	'step')
[87]	1702	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
	1703	'kinetic energy')
[927]	1704	144 FORMAT (' masking method is used')
[1]	1705	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
[241]	1706	'conserved'/ &
	1707	' using the ',A,' mode')
	1708	151 FORMAT (' with u_bulk = ',F7.3,' m/s and v_bulk = ',F7.3,' m/s')
[306]	1709	152 FORMAT (' --> External pressure gradient directly prescribed by the user:',&
	1710	/' ',2(1X,E12.5),'Pa/m in x/y direction', &
	1711	/' starting from dp_level_b =', F8.3, 'm', A /)
[411]	1712	153 FORMAT (' --> Large-scale vertical motion is used in the ', &
	1713	'prognostic equation for')
	1714	154 FORMAT (' the potential temperature')
[1]	1715	200 FORMAT (//' Run time and time step information:'/ &
	1716	' ----------------------------------'/)
	1717	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
	1718	' CFL-factor: ',F4.2)
	1719	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
	1720	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
	1721	' End time: ',F9.3,' s')
	1722	204 FORMAT ( A,F9.3,' s')
	1723	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
	1724	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
	1725	' CPU-time used: ',F9.3,' s per timestep: ', &
	1726	' ',F9.3,' s'/ &
	1727	' per second of simulated tim', &
	1728	'e: ',F9.3,' s')
[291]	1729	207 FORMAT ( A/' Coupling start time:',F9.3,' s')
[1]	1730	250 FORMAT (//' Computational grid and domain size:'/ &
	1731	' ----------------------------------'// &
	1732	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
	1733	' m dz = ',F7.3,' m'/ &
	1734	' Domain size: x = ',F10.3,' m y = ',F10.3, &
	1735	' m z(u) = ',F10.3,' m'/)
	1736	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
	1737	' factor: ',F5.3/ &
	1738	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
	1739	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
	1740	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
	1741	255 FORMAT (' Subdomains have equal size')
	1742	256 FORMAT (' Subdomains at the upper edges of the virtual processor grid ', &
	1743	'have smaller sizes'/ &
	1744	' Size of smallest subdomain: ( ',I4,', ',I4,', ',I4,')')
	1745	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
	1746	' degrees')
	1747	270 FORMAT (//' Topography informations:'/ &
	1748	' -----------------------'// &
	1749	1X,'Topography: ',A)
	1750	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
	1751	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
	1752	' / ',I4)
[240]	1753	272 FORMAT ( ' Single quasi-2D street canyon of infinite length in ',A, &
	1754	' direction' / &
	1755	' Canyon height: ', F6.2, 'm, ch = ', I4, '.' / &
	1756	' Canyon position (',A,'-walls): cxl = ', I4,', cxr = ', I4, '.')
[256]	1757	278 FORMAT (' Topography grid definition convention:'/ &
	1758	' cell edge (staggered grid points'/ &
	1759	' (u in x-direction, v in y-direction))' /)
	1760	279 FORMAT (' Topography grid definition convention:'/ &
	1761	' cell center (scalar grid points)' /)
[138]	1762	280 FORMAT (//' Vegetation canopy (drag) model:'/ &
	1763	' ------------------------------'// &
	1764	' Canopy mode: ', A / &
	1765	' Canopy top: ',I4 / &
	1766	' Leaf drag coefficient: ',F6.2 /)
[153]	1767	281 FORMAT (/ ' Scalar_exchange_coefficient: ',F6.2 / &
	1768	' Scalar concentration at leaf surfaces in kg/m**3: ',F6.2 /)
	1769	282 FORMAT (' Predefined constant heatflux at the top of the vegetation: ',F6.2,' K m/s')
	1770	283 FORMAT (/ ' Characteristic levels of the leaf area density:'// &
[138]	1771	' Height: ',A,' m'/ &
	1772	' Leaf area density: ',A,' m2/m3'/ &
	1773	' Gradient: ',A,' m2/m4'/ &
	1774	' Gridpoint: ',A)
	1775
[1]	1776	300 FORMAT (//' Boundary conditions:'/ &
	1777	' -------------------'// &
	1778	' p uv ', &
	1779	' pt'// &
	1780	' B. bound.: ',A/ &
	1781	' T. bound.: ',A)
[97]	1782	301 FORMAT (/' ',A// &
[1]	1783	' B. bound.: ',A/ &
	1784	' T. bound.: ',A)
[19]	1785	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
	1786	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
	1787	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
	1788	'computational u,v-level:'// &
[1]	1789	' zp = ',F6.2,' m z0 = ',F6.4,' m kappa = ',F4.2/ &
	1790	' Rif value range: ',F6.2,' <= rif <=',F6.2)
[97]	1791	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
[1]	1792	307 FORMAT (' Heatflux has a random normal distribution')
	1793	308 FORMAT (' Predefined surface temperature')
[97]	1794	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
[1]	1795	310 FORMAT (//' 1D-Model:'// &
	1796	' Rif value range: ',F6.2,' <= rif <=',F6.2)
	1797	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
	1798	312 FORMAT (' Predefined surface humidity')
	1799	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
	1800	314 FORMAT (' Predefined scalar value at the surface')
[19]	1801	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
[102]	1802	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
	1803	'atmosphere model')
[1]	1804	317 FORMAT (//' Lateral boundaries:'/ &
	1805	' left/right: ',A/ &
	1806	' north/south: ',A)
	1807	318 FORMAT (/' outflow damping layer width: ',I3,' gridpoints with km_', &
	1808	'max =',F5.1,' m**2/s')
[151]	1809	319 FORMAT (' turbulence recycling at inflow switched on'/ &
	1810	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
	1811	' inflow damping height: ',F6.1,' m width: ',F6.1,' m')
	1812	320 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
[103]	1813	' v: ',F9.6,' m2/s2')
[151]	1814	325 FORMAT (//' List output:'/ &
[1]	1815	' -----------'// &
	1816	' 1D-Profiles:'/ &
	1817	' Output every ',F8.2,' s')
[151]	1818	326 FORMAT (' Time averaged over ',F8.2,' s'/ &
[1]	1819	' Averaging input every ',F8.2,' s')
	1820	330 FORMAT (//' Data output:'/ &
	1821	' -----------'/)
	1822	331 FORMAT (/' 1D-Profiles:')
	1823	332 FORMAT (/' ',A)
	1824	333 FORMAT (' Output every ',F8.2,' s',/ &
	1825	' Time averaged over ',F8.2,' s'/ &
	1826	' Averaging input every ',F8.2,' s')
	1827	334 FORMAT (/' 2D-Arrays',A,':')
	1828	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1829	' Output every ',F8.2,' s ',A/ &
	1830	' Cross sections at ',A1,' = ',A/ &
	1831	' scalar-coordinates: ',A,' m'/)
	1832	336 FORMAT (/' 3D-Arrays',A,':')
	1833	337 FORMAT (/' Arrays: ',A/ &
	1834	' Output every ',F8.2,' s ',A/ &
	1835	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
	1836	338 FORMAT (' Compressed data output'/ &
	1837	' Decimal precision: ',A/)
	1838	339 FORMAT (' No output during initial ',F8.2,' s')
	1839	340 FORMAT (/' Time series:')
	1840	341 FORMAT (' Output every ',F8.2,' s'/)
	1841	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1842	' Output every ',F8.2,' s ',A/ &
	1843	' Time averaged over ',F8.2,' s'/ &
	1844	' Averaging input every ',F8.2,' s'/ &
	1845	' Cross sections at ',A1,' = ',A/ &
	1846	' scalar-coordinates: ',A,' m'/)
	1847	343 FORMAT (/' Arrays: ',A/ &
	1848	' Output every ',F8.2,' s ',A/ &
	1849	' Time averaged over ',F8.2,' s'/ &
	1850	' Averaging input every ',F8.2,' s'/ &
	1851	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
[292]	1852	344 FORMAT (' Output format: ',A/)
[410]	1853	345 FORMAT (/' Scaling lengths for output locations of all subsequent mask IDs:',/ &
	1854	' mask_scale_x (in x-direction): ',F9.3, ' m',/ &
	1855	' mask_scale_y (in y-direction): ',F9.3, ' m',/ &
	1856	' mask_scale_z (in z-direction): ',F9.3, ' m' )
	1857	346 FORMAT (/' Masked data output',A,' for mask ID ',I2, ':')
	1858	347 FORMAT (' Variables: ',A/ &
	1859	' Output every ',F8.2,' s')
	1860	348 FORMAT (' Variables: ',A/ &
	1861	' Output every ',F8.2,' s'/ &
	1862	' Time averaged over ',F8.2,' s'/ &
	1863	' Averaging input every ',F8.2,' s')
	1864	349 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
	1865	'mask_scale_',A,' predefined by array mask_',I2.2,'_',A,':'/ &
	1866	13(' ',8(F8.2,',')/) )
	1867	350 FORMAT (/' Output locations in ',A,'-direction: ', &
	1868	'all gridpoints along ',A,'-direction (default).' )
	1869	351 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
	1870	'mask_scale_',A,' constructed from array mask_',I2.2,'_',A,'_loop:'/ &
	1871	' loop begin:',F8.2,', end:',F8.2,', stride:',F8.2 )
[1]	1872	#if defined( __dvrp_graphics )
	1873	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
	1874	' Output every ',F7.1,' s'/ &
	1875	' Output mode: ',A/ &
	1876	' Host / User: ',A,' / ',A/ &
	1877	' Directory: ',A// &
	1878	' The sequence contains:')
[337]	1879	361 FORMAT (/' Isosurface of "',A,'" Threshold value: ', E12.3/ &
	1880	' Isosurface color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
	1881	362 FORMAT (/' Slicer plane ',A/ &
[336]	1882	' Slicer limits: [',F6.2,',',F6.2,']')
[337]	1883	363 FORMAT (/' Particles'/ &
[336]	1884	' particle size: ',F7.2,' m')
	1885	364 FORMAT (' particle ',A,' controlled by "',A,'" with interval [', &
	1886	F6.2,',',F6.2,']')
[337]	1887	365 FORMAT (/' Groundplate color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)'/ &
[336]	1888	' Superelevation along (x,y,z): (',F4.1,',',F4.1,',',F4.1, &
	1889	')'/ &
	1890	' Clipping limits: from x = ',F9.1,' m to x = ',F9.1,' m'/ &
	1891	' from y = ',F9.1,' m to y = ',F9.1,' m')
[337]	1892	366 FORMAT (/' Topography color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
[336]	1893	367 FORMAT (' Polygon reduction for topography: cluster_size = ', I1)
[1]	1894	#endif
	1895	#if defined( __spectra )
	1896	370 FORMAT (' Spectra:')
	1897	371 FORMAT (' Output every ',F7.1,' s'/)
	1898	372 FORMAT (' Arrays: ', 10(A5,',')/ &
	1899	' Directions: ', 10(A5,',')/ &
[189]	1900	' height levels k = ', 20(I3,',')/ &
	1901	' ', 20(I3,',')/ &
	1902	' ', 20(I3,',')/ &
	1903	' ', 20(I3,',')/ &
	1904	' ', 19(I3,','),I3,'.'/ &
[1]	1905	' height levels selected for standard plot:'/ &
[189]	1906	' k = ', 20(I3,',')/ &
	1907	' ', 20(I3,',')/ &
	1908	' ', 20(I3,',')/ &
	1909	' ', 20(I3,',')/ &
	1910	' ', 19(I3,','),I3,'.'/ &
[1]	1911	' Time averaged over ', F7.1, ' s,' / &
	1912	' Profiles for the time averaging are taken every ', &
	1913	F6.1,' s')
	1914	#endif
	1915	400 FORMAT (//' Physical quantities:'/ &
	1916	' -------------------'/)
	1917	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
	1918	' Geograph. latitude : phi = ',F4.1,' degr'/ &
	1919	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
	1920	' f* = ',F9.6,' 1/s')
	1921	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
[97]	1922	412 FORMAT (/' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
	1923	413 FORMAT (/' Reference temperature in buoyancy terms: ',F8.4,' K')
[57]	1924	415 FORMAT (/' Cloud physics parameters:'/ &
[1]	1925	' ------------------------'/)
[57]	1926	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
[1]	1927	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
	1928	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
	1929	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
	1930	' Vapourization heat : L_v = ',E8.2,' J/kg')
	1931	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
	1932	' Height: ',A,' m'/ &
	1933	' Temperature: ',A,' K'/ &
	1934	' Gradient: ',A,' K/100m'/ &
	1935	' Gridpoint: ',A)
	1936	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
	1937	' Height: ',A,' m'/ &
	1938	' Humidity: ',A,' kg/kg'/ &
	1939	' Gradient: ',A,' (kg/kg)/100m'/ &
	1940	' Gridpoint: ',A)
	1941	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
	1942	' Height: ',A,' m'/ &
	1943	' Scalar concentration: ',A,' kg/m**3'/ &
	1944	' Gradient: ',A,' (kg/m**3)/100m'/ &
	1945	' Gridpoint: ',A)
	1946	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
	1947	' Height: ',A,' m'/ &
	1948	' ug: ',A,' m/s'/ &
	1949	' Gradient: ',A,' 1/100s'/ &
	1950	' Gridpoint: ',A)
	1951	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
	1952	' Height: ',A,' m'/ &
[97]	1953	' vg: ',A,' m/s'/ &
[1]	1954	' Gradient: ',A,' 1/100s'/ &
	1955	' Gridpoint: ',A)
[97]	1956	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
	1957	' Height: ',A,' m'/ &
	1958	' Salinity: ',A,' psu'/ &
	1959	' Gradient: ',A,' psu/100m'/ &
	1960	' Gridpoint: ',A)
[411]	1961	426 FORMAT (/' Characteristic levels of the subsidence/ascent profile:'// &
	1962	' Height: ',A,' m'/ &
	1963	' w_subs: ',A,' m/s'/ &
	1964	' Gradient: ',A,' (m/s)/100m'/ &
	1965	' Gridpoint: ',A)
[767]	1966	427 FORMAT (/' Initial wind profiles (u,v) are interpolated from given'// &
	1967	' profiles')
[824]	1968	430 FORMAT (//' Cloud physics quantities / methods:'/ &
	1969	' ----------------------------------'/)
	1970	431 FORMAT (' Humidity is treated as purely passive scalar (no condensati', &
	1971	'on)')
	1972	432 FORMAT (' Bulk scheme with liquid water potential temperature and'/ &
	1973	' total water content is used.'/ &
	1974	' Condensation is parameterized via 0% - or 100% scheme.')
	1975	433 FORMAT (' Cloud droplets treated explicitly using the Lagrangian part', &
	1976	'icle model')
	1977	434 FORMAT (' Curvature and solution effecs are considered for growth of', &
	1978	' droplets < 1.0E-6 m')
[825]	1979	435 FORMAT (' Droplet collision is handled by ',A,'-kernel')
[828]	1980	436 FORMAT (' Fast kernel with fixed radius- and dissipation classes ', &
	1981	'are used'/ &
	1982	' number of radius classes: ',I3,' interval ', &
	1983	'[1.0E-6,2.0E-4] m'/ &
	1984	' number of dissipation classes: ',I2,' interval ', &
	1985	'[0,1000] cm2/s3')
	1986	437 FORMAT (' Droplet collision is switched off')
[1]	1987	450 FORMAT (//' LES / Turbulence quantities:'/ &
	1988	' ---------------------------'/)
[824]	1989	451 FORMAT (' Diffusion coefficients are constant:'/ &
	1990	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
	1991	452 FORMAT (' Mixing length is limited to the Prandtl mixing lenth.')
	1992	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
	1993	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
	1994	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
[1]	1995	470 FORMAT (//' Actions during the simulation:'/ &
	1996	' -----------------------------'/)
[94]	1997	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
	1998	' Disturbance amplitude : ',F4.2, ' m/s'/ &
	1999	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
	2000	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
[1]	2001	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
	2002	' to i/j =',I4)
	2003	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
	2004	1X,F5.3, ' m2/s2')
	2005	474 FORMAT (' Random number generator used : ',A/)
	2006	475 FORMAT (' The surface temperature is increased (or decreased, ', &
	2007	'respectively, if'/ &
	2008	' the value is negative) by ',F5.2,' K at the beginning of the',&
	2009	' 3D-simulation'/)
	2010	476 FORMAT (' The surface humidity is increased (or decreased, ',&
	2011	'respectively, if the'/ &
	2012	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
	2013	' the 3D-simulation'/)
	2014	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
	2015	'respectively, if the'/ &
	2016	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
	2017	' the 3D-simulation'/)
	2018	480 FORMAT (' Particles:'/ &
	2019	' ---------'// &
	2020	' Particle advection is active (switched on at t = ', F7.1, &
	2021	' s)'/ &
	2022	' Start of new particle generations every ',F6.1,' s'/ &
	2023	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
	2024	' bottom: ', A, ' top: ', A/&
	2025	' Maximum particle age: ',F9.1,' s'/ &
[117]	2026	' Advection stopped at t = ',F9.1,' s'/ &
	2027	' Particles are sorted every ',F9.1,' s'/)
[1]	2028	481 FORMAT (' Particles have random start positions'/)
[336]	2029	482 FORMAT (' Particles are advected only horizontally'/)
[1]	2030	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
	2031	484 FORMAT (' Number of tails of the total domain: ',I10/ &
	2032	' Minimum distance between tailpoints: ',F8.2,' m'/ &
	2033	' Maximum age of the end of the tail: ',F8.2,' s')
	2034	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
	2035	486 FORMAT (' Particle statistics are written on file'/)
	2036	487 FORMAT (' Number of particle groups: ',I2/)
	2037	488 FORMAT (' SGS velocity components are used for particle advection'/ &
	2038	' minimum timestep for advection: ', F7.5/)
	2039	489 FORMAT (' Number of particles simultaneously released at each ', &
	2040	'point: ', I5/)
	2041	490 FORMAT (' Particle group ',I2,':'/ &
	2042	' Particle radius: ',E10.3, 'm')
	2043	491 FORMAT (' Particle inertia is activated'/ &
	2044	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
	2045	492 FORMAT (' Particles are advected only passively (no inertia)'/)
	2046	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
	2047	' y:',F8.1,' - ',F8.1,' m'/&
	2048	' z:',F8.1,' - ',F8.1,' m'/&
	2049	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
	2050	' m dz = ',F8.1,' m'/)
	2051	494 FORMAT (' Output of particle time series in NetCDF format every ', &
	2052	F8.2,' s'/)
	2053	495 FORMAT (' Number of particles in total domain: ',I10/)
	2054	500 FORMAT (//' 1D-Model parameters:'/ &
	2055	' -------------------'// &
	2056	' Simulation time: ',F8.1,' s'/ &
	2057	' Run-controll output every: ',F8.1,' s'/ &
	2058	' Vertical profile output every: ',F8.1,' s'/ &
	2059	' Mixing length calculation: ',A/ &
	2060	' Dissipation calculation: ',A/)
	2061	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
[667]	2062	503 FORMAT (' --> Momentum advection via Wicker-Skamarock-Scheme 5th order')
	2063	504 FORMAT (' --> Scalar advection via Wicker-Skamarock-Scheme 5th order')
[1]	2064
	2065
	2066	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |