Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 760

Last change on this file since 760 was 760, checked in by raasch, 13 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 77.3 KB

Rev	Line
[1]	1	SUBROUTINE header
	2
	3	!------------------------------------------------------------------------------!
[254]	4	! Current revisions:
[1]	5	! -----------------
[392]	6	!
[760]	7	!
[392]	8	! Former revisions:
	9	! -----------------
	10	! $Id: header.f90 760 2011-09-15 14:37:54Z raasch $
	11	!
[760]	12	! 759 2011-09-15 13:58:31Z raasch
	13	! output of maximum number of parallel io streams
	14	!
[708]	15	! 707 2011-03-29 11:39:40Z raasch
	16	! bc_lr/ns replaced by bc_lr/ns_cyc
	17	!
[668]	18	! 667 2010-12-23 12:06:00Z suehring/gryschka
	19	! Output of advection scheme.
	20	! Modified output of Prandtl-layer height.
	21	!
[581]	22	! 580 2010-10-05 13:59:11Z heinze
	23	! Renaming of ws_vertical_gradient to subs_vertical_gradient,
	24	! ws_vertical_gradient_level to subs_vertical_gradient_level and
	25	! ws_vertical_gradient_level_ind to subs_vertical_gradient_level_i
	26	!
[494]	27	! 493 2010-03-01 08:30:24Z raasch
	28	! NetCDF data output format extendend for NetCDF4/HDF5
	29	!
[482]	30	! 449 2010-02-02 11:23:59Z raasch
	31	! +large scale vertical motion (subsidence/ascent)
	32	! Bugfix: index problem concerning gradient_level indices removed
	33	!
[449]	34	! 410 2009-12-04 17:05:40Z letzel
	35	! Masked data output: + dt_domask, mask_01~20_x\|y\|z, mask_01~20_x\|y\|z_loop,
[493]	36	! mask_scale\|_x\|y\|z, masks, skip_time_domask
[449]	37	!
[392]	38	! 346 2009-07-06 10:13:41Z raasch
[328]	39	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
[291]	40	! Coupling with independent precursor runs.
[254]	41	! Output of messages replaced by message handling routine.
[336]	42	! Output of several additional dvr parameters
[240]	43	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
[241]	44	! canyon_wall_south, conserve_volume_flow_mode, dp_external, dp_level_b,
	45	! dp_smooth, dpdxy, u_bulk, v_bulk
[256]	46	! topography_grid_convention moved from user_header
[292]	47	! small bugfix concerning 3d 64bit netcdf output format
[1]	48	!
[226]	49	! 206 2008-10-13 14:59:11Z raasch
	50	! Bugfix: error in zu index in case of section_xy = -1
	51	!
[200]	52	! 198 2008-09-17 08:55:28Z raasch
	53	! Format adjustments allowing output of larger revision numbers
	54	!
[198]	55	! 197 2008-09-16 15:29:03Z raasch
	56	! allow 100 spectra levels instead of 10 for consistency with
	57	! define_netcdf_header,
	58	! bugfix in the output of the characteristic levels of potential temperature,
	59	! geostrophic wind, scalar concentration, humidity and leaf area density,
	60	! output of turbulence recycling informations
	61	!
[139]	62	! 138 2007-11-28 10:03:58Z letzel
	63	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
	64	! Allow two instead of one digit to specify isosurface and slicer variables.
	65	! Output of sorting frequency of particles
	66	!
[110]	67	! 108 2007-08-24 15:10:38Z letzel
	68	! Output of informations for coupled model runs (boundary conditions etc.)
	69	! + output of momentumfluxes at the top boundary
	70	! Rayleigh damping for ocean, e_init
	71	!
[98]	72	! 97 2007-06-21 08:23:15Z raasch
	73	! Adjustments for the ocean version.
	74	! use_pt_reference renamed use_reference
	75	!
[90]	76	! 87 2007-05-22 15:46:47Z raasch
	77	! Bugfix: output of use_upstream_for_tke
	78	!
[83]	79	! 82 2007-04-16 15:40:52Z raasch
	80	! Preprocessor strings for different linux clusters changed to "lc",
	81	! routine local_flush is used for buffer flushing
	82	!
[77]	83	! 76 2007-03-29 00:58:32Z raasch
	84	! Output of netcdf_64bit_3d, particles-package is now part of the default code,
	85	! output of the loop optimization method, moisture renamed humidity,
	86	! output of subversion revision number
	87	!
[39]	88	! 19 2007-02-23 04:53:48Z raasch
	89	! Output of scalar flux applied at top boundary
	90	!
[3]	91	! RCS Log replace by Id keyword, revision history cleaned up
	92	!
[1]	93	! Revision 1.63 2006/08/22 13:53:13 raasch
	94	! Output of dz_max
	95	!
	96	! Revision 1.1 1997/08/11 06:17:20 raasch
	97	! Initial revision
	98	!
	99	!
	100	! Description:
	101	! ------------
	102	! Writing a header with all important informations about the actual run.
	103	! This subroutine is called three times, two times at the beginning
	104	! (writing information on files RUN_CONTROL and HEADER) and one time at the
	105	! end of the run, then writing additional information about CPU-usage on file
	106	! header.
[411]	107	!-----------------------------------------------------------------------------!
[1]	108
	109	USE arrays_3d
	110	USE control_parameters
	111	USE cloud_parameters
	112	USE cpulog
	113	USE dvrp_variables
	114	USE grid_variables
	115	USE indices
	116	USE model_1d
	117	USE particle_attributes
	118	USE pegrid
[411]	119	USE subsidence_mod
[1]	120	USE spectrum
	121
	122	IMPLICIT NONE
	123
	124	CHARACTER (LEN=1) :: prec
	125	CHARACTER (LEN=2) :: do2d_mode
	126	CHARACTER (LEN=5) :: section_chr
	127	CHARACTER (LEN=9) :: time_to_string
	128	CHARACTER (LEN=10) :: coor_chr, host_chr
	129	CHARACTER (LEN=16) :: begin_chr
[200]	130	CHARACTER (LEN=23) :: ver_rev
[1]	131	CHARACTER (LEN=40) :: output_format
[167]	132	CHARACTER (LEN=70) :: char1, char2, dopr_chr, &
[1]	133	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
[410]	134	domask_chr, run_classification
[167]	135	CHARACTER (LEN=86) :: coordinates, gradients, learde, slices, &
	136	temperatures, ugcomponent, vgcomponent
[1]	137	CHARACTER (LEN=85) :: roben, runten
	138
[410]	139	CHARACTER (LEN=1), DIMENSION(1:3) :: dir = (/ 'x', 'y', 'z' /)
	140
	141	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, ch, count, cwx, cwy, &
	142	cxl, cxr, cyn, cys, dim, i, ihost, io, j, l, ll, m, mpi_type
[1]	143	REAL :: cpuseconds_per_simulated_second
	144
	145	!
	146	!-- Open the output file. At the end of the simulation, output is directed
	147	!-- to unit 19.
	148	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
	149	.NOT. simulated_time_at_begin /= simulated_time ) THEN
	150	io = 15 ! header output on file RUN_CONTROL
	151	ELSE
	152	io = 19 ! header output on file HEADER
	153	ENDIF
	154	CALL check_open( io )
	155
	156	!
	157	!-- At the end of the run, output file (HEADER) will be rewritten with
	158	!-- new informations
	159	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
	160
	161	!
	162	!-- Determine kind of model run
	163	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
	164	run_classification = '3D - restart run'
[328]	165	ELSEIF ( TRIM( initializing_actions ) == 'cyclic_fill' ) THEN
	166	run_classification = '3D - run with cyclic fill of 3D - prerun data'
[147]	167	ELSEIF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
	168	run_classification = '3D - run without 1D - prerun'
[197]	169	ELSEIF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[147]	170	run_classification = '3D - run with 1D - prerun'
[197]	171	ELSEIF ( INDEX( initializing_actions, 'by_user' ) /=0 ) THEN
	172	run_classification = '3D - run initialized by user'
[1]	173	ELSE
[254]	174	message_string = ' unknown action(s): ' // TRIM( initializing_actions )
	175	CALL message( 'header', 'PA0191', 0, 0, 0, 6, 0 )
[1]	176	ENDIF
[97]	177	IF ( ocean ) THEN
	178	run_classification = 'ocean - ' // run_classification
	179	ELSE
	180	run_classification = 'atmosphere - ' // run_classification
	181	ENDIF
[1]	182
	183	!
	184	!-- Run-identification, date, time, host
	185	host_chr = host(1:10)
[75]	186	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
[102]	187	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
[291]	188	IF ( TRIM( coupling_mode ) /= 'uncoupled' ) THEN
	189	#if defined( __mpi2 )
	190	mpi_type = 2
	191	#else
	192	mpi_type = 1
	193	#endif
	194	WRITE ( io, 101 ) mpi_type, coupling_mode
	195	ENDIF
[102]	196	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
	197	ADJUSTR( host_chr )
[1]	198	#if defined( __parallel )
	199	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
	200	char1 = 'calculated'
	201	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	202	host(1:2) == 'lc' ) .AND. &
	203	npex == -1 .AND. pdims(2) == 1 ) THEN
	204	char1 = 'forced'
	205	ELSE
	206	char1 = 'predefined'
	207	ENDIF
	208	IF ( threads_per_task == 1 ) THEN
[102]	209	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
[1]	210	ELSE
[102]	211	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
[1]	212	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
	213	ENDIF
	214	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	215	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
	216	npex == -1 .AND. pdims(2) == 1 ) &
	217	THEN
[102]	218	WRITE ( io, 106 )
[1]	219	ELSEIF ( pdims(2) == 1 ) THEN
[102]	220	WRITE ( io, 107 ) 'x'
[1]	221	ELSEIF ( pdims(1) == 1 ) THEN
[102]	222	WRITE ( io, 107 ) 'y'
[1]	223	ENDIF
[102]	224	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 105 )
[759]	225	IF ( numprocs /= maximum_parallel_io_streams ) THEN
	226	WRITE ( io, 108 ) maximum_parallel_io_streams
	227	ENDIF
[1]	228	#endif
	229	WRITE ( io, 99 )
	230
	231	!
	232	!-- Numerical schemes
	233	WRITE ( io, 110 )
	234	IF ( psolver(1:7) == 'poisfft' ) THEN
	235	WRITE ( io, 111 ) TRIM( fft_method )
	236	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
	237	ELSEIF ( psolver == 'sor' ) THEN
	238	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
	239	ELSEIF ( psolver == 'multigrid' ) THEN
	240	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
	241	IF ( mg_cycles == -1 ) THEN
	242	WRITE ( io, 140 ) residual_limit
	243	ELSE
	244	WRITE ( io, 141 ) mg_cycles
	245	ENDIF
	246	IF ( mg_switch_to_pe0_level == 0 ) THEN
	247	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	248	nzt_mg(1)
[197]	249	ELSEIF ( mg_switch_to_pe0_level /= -1 ) THEN
[1]	250	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
	251	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
	252	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
	253	nzt_mg(mg_switch_to_pe0_level), &
	254	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	255	nzt_mg(1)
	256	ENDIF
	257	ENDIF
	258	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
	259	THEN
	260	WRITE ( io, 142 )
	261	ENDIF
	262
	263	IF ( momentum_advec == 'pw-scheme' ) THEN
	264	WRITE ( io, 113 )
[667]	265	ELSEIF (momentum_advec == 'ws-scheme' ) THEN
	266	WRITE ( io, 503 )
	267	ELSEIF (momentum_advec == 'ups-scheme' ) THEN
[1]	268	WRITE ( io, 114 )
	269	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
	270	IF ( overshoot_limit_u /= 0.0 .OR. overshoot_limit_v /= 0.0 .OR. &
	271	overshoot_limit_w /= 0.0 ) THEN
	272	WRITE ( io, 127 ) overshoot_limit_u, overshoot_limit_v, &
	273	overshoot_limit_w
	274	ENDIF
	275	IF ( ups_limit_u /= 0.0 .OR. ups_limit_v /= 0.0 .OR. &
	276	ups_limit_w /= 0.0 ) &
	277	THEN
	278	WRITE ( io, 125 ) ups_limit_u, ups_limit_v, ups_limit_w
	279	ENDIF
	280	IF ( long_filter_factor /= 0.0 ) WRITE ( io, 115 ) long_filter_factor
	281	ENDIF
	282	IF ( scalar_advec == 'pw-scheme' ) THEN
	283	WRITE ( io, 116 )
[667]	284	ELSEIF ( scalar_advec == 'ws-scheme' ) THEN
	285	WRITE ( io, 504 )
[1]	286	ELSEIF ( scalar_advec == 'ups-scheme' ) THEN
	287	WRITE ( io, 117 )
	288	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
	289	IF ( overshoot_limit_e /= 0.0 .OR. overshoot_limit_pt /= 0.0 ) THEN
	290	WRITE ( io, 128 ) overshoot_limit_e, overshoot_limit_pt
	291	ENDIF
	292	IF ( ups_limit_e /= 0.0 .OR. ups_limit_pt /= 0.0 ) THEN
	293	WRITE ( io, 126 ) ups_limit_e, ups_limit_pt
	294	ENDIF
	295	ELSE
	296	WRITE ( io, 118 )
	297	ENDIF
[63]	298
	299	WRITE ( io, 139 ) TRIM( loop_optimization )
	300
[1]	301	IF ( galilei_transformation ) THEN
	302	IF ( use_ug_for_galilei_tr ) THEN
	303	char1 = 'geostrophic wind'
	304	ELSE
	305	char1 = 'mean wind in model domain'
	306	ENDIF
	307	IF ( simulated_time_at_begin == simulated_time ) THEN
	308	char2 = 'at the start of the run'
	309	ELSE
	310	char2 = 'at the end of the run'
	311	ENDIF
	312	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
	313	advected_distance_x/1000.0, advected_distance_y/1000.0
	314	ENDIF
	315	IF ( timestep_scheme == 'leapfrog' ) THEN
	316	WRITE ( io, 120 )
	317	ELSEIF ( timestep_scheme == 'leapfrog+euler' ) THEN
	318	WRITE ( io, 121 )
	319	ELSE
	320	WRITE ( io, 122 ) timestep_scheme
	321	ENDIF
[87]	322	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
[1]	323	IF ( rayleigh_damping_factor /= 0.0 ) THEN
[108]	324	IF ( .NOT. ocean ) THEN
	325	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
	326	rayleigh_damping_factor
	327	ELSE
	328	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
	329	rayleigh_damping_factor
	330	ENDIF
[1]	331	ENDIF
[75]	332	IF ( humidity ) THEN
[1]	333	IF ( .NOT. cloud_physics ) THEN
	334	WRITE ( io, 129 )
	335	ELSE
	336	WRITE ( io, 130 )
	337	WRITE ( io, 131 )
	338	IF ( radiation ) WRITE ( io, 132 )
	339	IF ( precipitation ) WRITE ( io, 133 )
	340	ENDIF
	341	ENDIF
	342	IF ( passive_scalar ) WRITE ( io, 134 )
[240]	343	IF ( conserve_volume_flow ) THEN
[241]	344	WRITE ( io, 150 ) conserve_volume_flow_mode
	345	IF ( TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
	346	WRITE ( io, 151 ) u_bulk, v_bulk
	347	ENDIF
[240]	348	ELSEIF ( dp_external ) THEN
	349	IF ( dp_smooth ) THEN
[241]	350	WRITE ( io, 152 ) dpdxy, dp_level_b, ', vertically smoothed.'
[240]	351	ELSE
[241]	352	WRITE ( io, 152 ) dpdxy, dp_level_b, '.'
[240]	353	ENDIF
	354	ENDIF
[411]	355	IF ( large_scale_subsidence ) THEN
	356	WRITE ( io, 153 )
	357	WRITE ( io, 154 )
	358	ENDIF
[1]	359	WRITE ( io, 99 )
	360
	361	!
	362	!-- Runtime and timestep informations
	363	WRITE ( io, 200 )
	364	IF ( .NOT. dt_fixed ) THEN
	365	WRITE ( io, 201 ) dt_max, cfl_factor
	366	ELSE
	367	WRITE ( io, 202 ) dt
	368	ENDIF
	369	WRITE ( io, 203 ) simulated_time_at_begin, end_time
	370
	371	IF ( time_restart /= 9999999.9 .AND. &
	372	simulated_time_at_begin == simulated_time ) THEN
	373	IF ( dt_restart == 9999999.9 ) THEN
	374	WRITE ( io, 204 ) ' Restart at: ',time_restart
	375	ELSE
	376	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
	377	ENDIF
	378	ENDIF
	379
	380	IF ( simulated_time_at_begin /= simulated_time ) THEN
	381	i = MAX ( log_point_s(10)%counts, 1 )
	382	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
	383	cpuseconds_per_simulated_second = 0.0
	384	ELSE
	385	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
	386	( simulated_time - &
	387	simulated_time_at_begin )
	388	ENDIF
	389	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
	390	log_point_s(10)%sum / REAL( i ), &
	391	cpuseconds_per_simulated_second
	392	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
	393	IF ( dt_restart == 9999999.9 ) THEN
	394	WRITE ( io, 204 ) ' Next restart at: ',time_restart
	395	ELSE
	396	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
	397	ENDIF
	398	ENDIF
	399	ENDIF
	400
	401	!
[291]	402	!-- Start time for coupled runs, if independent precursor runs for atmosphere
	403	!-- and ocean are used. In this case, coupling_start_time defines the time
	404	!-- when the coupling is switched on.
	405	IF ( coupling_start_time /= 0.0 ) THEN
	406	IF ( coupling_start_time >= simulated_time_at_begin ) THEN
	407	char1 = 'Precursor run for a coupled atmosphere-ocean run'
	408	ELSE
	409	char1 = 'Coupled atmosphere-ocean run following independent ' // &
	410	'precursor runs'
	411	ENDIF
	412	WRITE ( io, 207 ) char1, coupling_start_time
	413	ENDIF
	414
	415	!
[1]	416	!-- Computational grid
[94]	417	IF ( .NOT. ocean ) THEN
	418	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
	419	IF ( dz_stretch_level_index < nzt+1 ) THEN
	420	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	421	dz_stretch_factor, dz_max
	422	ENDIF
	423	ELSE
	424	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(0)
	425	IF ( dz_stretch_level_index > 0 ) THEN
	426	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	427	dz_stretch_factor, dz_max
	428	ENDIF
[1]	429	ENDIF
	430	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
	431	MIN( nnz+2, nzt+2 )
[76]	432	IF ( numprocs > 1 ) THEN
	433	IF ( nxa == nx .AND. nya == ny .AND. nza == nz ) THEN
	434	WRITE ( io, 255 )
	435	ELSE
	436	WRITE ( io, 256 ) nnx-(nxa-nx), nny-(nya-ny), nzt+2
	437	ENDIF
[1]	438	ENDIF
	439	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
	440
	441	!
	442	!-- Topography
	443	WRITE ( io, 270 ) topography
	444	SELECT CASE ( TRIM( topography ) )
	445
	446	CASE ( 'flat' )
	447	! no actions necessary
	448
	449	CASE ( 'single_building' )
	450	blx = INT( building_length_x / dx )
	451	bly = INT( building_length_y / dy )
	452	bh = INT( building_height / dz )
	453
	454	IF ( building_wall_left == 9999999.9 ) THEN
	455	building_wall_left = ( nx + 1 - blx ) / 2 * dx
	456	ENDIF
	457	bxl = INT ( building_wall_left / dx + 0.5 )
	458	bxr = bxl + blx
	459
	460	IF ( building_wall_south == 9999999.9 ) THEN
	461	building_wall_south = ( ny + 1 - bly ) / 2 * dy
	462	ENDIF
	463	bys = INT ( building_wall_south / dy + 0.5 )
	464	byn = bys + bly
	465
	466	WRITE ( io, 271 ) building_length_x, building_length_y, &
	467	building_height, bxl, bxr, bys, byn
	468
[240]	469	CASE ( 'single_street_canyon' )
	470	ch = NINT( canyon_height / dz )
	471	IF ( canyon_width_x /= 9999999.9 ) THEN
	472	!
	473	!-- Street canyon in y direction
	474	cwx = NINT( canyon_width_x / dx )
	475	IF ( canyon_wall_left == 9999999.9 ) THEN
	476	canyon_wall_left = ( nx + 1 - cwx ) / 2 * dx
	477	ENDIF
	478	cxl = NINT( canyon_wall_left / dx )
	479	cxr = cxl + cwx
	480	WRITE ( io, 272 ) 'y', canyon_height, ch, 'u', cxl, cxr
	481
	482	ELSEIF ( canyon_width_y /= 9999999.9 ) THEN
	483	!
	484	!-- Street canyon in x direction
	485	cwy = NINT( canyon_width_y / dy )
	486	IF ( canyon_wall_south == 9999999.9 ) THEN
	487	canyon_wall_south = ( ny + 1 - cwy ) / 2 * dy
	488	ENDIF
	489	cys = NINT( canyon_wall_south / dy )
	490	cyn = cys + cwy
	491	WRITE ( io, 272 ) 'x', canyon_height, ch, 'v', cys, cyn
	492	ENDIF
	493
[1]	494	END SELECT
	495
[256]	496	IF ( TRIM( topography ) /= 'flat' ) THEN
	497	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
	498	IF ( TRIM( topography ) == 'single_building' .OR. &
	499	TRIM( topography ) == 'single_street_canyon' ) THEN
	500	WRITE ( io, 278 )
	501	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
	502	WRITE ( io, 279 )
	503	ENDIF
	504	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_edge' ) THEN
	505	WRITE ( io, 278 )
	506	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_center' ) THEN
	507	WRITE ( io, 279 )
	508	ENDIF
	509	ENDIF
	510
[138]	511	IF ( plant_canopy ) THEN
	512
	513	WRITE ( io, 280 ) canopy_mode, pch_index, drag_coefficient
[153]	514	IF ( passive_scalar ) THEN
	515	WRITE ( io, 281 ) scalar_exchange_coefficient, &
	516	leaf_surface_concentration
	517	ENDIF
[138]	518
[1]	519	!
[153]	520	!-- Heat flux at the top of vegetation
	521	WRITE ( io, 282 ) cthf
	522
	523	!
[138]	524	!-- Leaf area density profile
	525	!-- Building output strings, starting with surface value
	526	WRITE ( learde, '(F6.2)' ) lad_surface
	527	gradients = '------'
	528	slices = ' 0'
	529	coordinates = ' 0.0'
	530	i = 1
	531	DO WHILE ( lad_vertical_gradient_level_ind(i) /= -9999 )
	532
	533	WRITE (coor_chr,'(F7.2)') lad(lad_vertical_gradient_level_ind(i))
	534	learde = TRIM( learde ) // ' ' // TRIM( coor_chr )
	535
	536	WRITE (coor_chr,'(F7.2)') lad_vertical_gradient(i)
	537	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	538
	539	WRITE (coor_chr,'(I7)') lad_vertical_gradient_level_ind(i)
	540	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	541
	542	WRITE (coor_chr,'(F7.1)') lad_vertical_gradient_level(i)
	543	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	544
	545	i = i + 1
	546	ENDDO
	547
[153]	548	WRITE ( io, 283 ) TRIM( coordinates ), TRIM( learde ), &
[138]	549	TRIM( gradients ), TRIM( slices )
	550
	551	ENDIF
	552
	553	!
[1]	554	!-- Boundary conditions
	555	IF ( ibc_p_b == 0 ) THEN
	556	runten = 'p(0) = 0 \|'
	557	ELSEIF ( ibc_p_b == 1 ) THEN
	558	runten = 'p(0) = p(1) \|'
	559	ELSE
	560	runten = 'p(0) = p(1) +R\|'
	561	ENDIF
	562	IF ( ibc_p_t == 0 ) THEN
	563	roben = 'p(nzt+1) = 0 \|'
	564	ELSE
	565	roben = 'p(nzt+1) = p(nzt) \|'
	566	ENDIF
	567
	568	IF ( ibc_uv_b == 0 ) THEN
	569	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
	570	ELSE
	571	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
	572	ENDIF
[132]	573	IF ( TRIM( bc_uv_t ) == 'dirichlet_0' ) THEN
	574	roben = TRIM( roben ) // ' uv(nzt+1) = 0 \|'
	575	ELSEIF ( ibc_uv_t == 0 ) THEN
[1]	576	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
	577	ELSE
	578	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
	579	ENDIF
	580
	581	IF ( ibc_pt_b == 0 ) THEN
	582	runten = TRIM( runten ) // ' pt(0) = pt_surface'
[102]	583	ELSEIF ( ibc_pt_b == 1 ) THEN
[1]	584	runten = TRIM( runten ) // ' pt(0) = pt(1)'
[102]	585	ELSEIF ( ibc_pt_b == 2 ) THEN
	586	runten = TRIM( runten ) // ' pt(0) = from coupled model'
[1]	587	ENDIF
	588	IF ( ibc_pt_t == 0 ) THEN
[19]	589	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
	590	ELSEIF( ibc_pt_t == 1 ) THEN
	591	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
	592	ELSEIF( ibc_pt_t == 2 ) THEN
	593	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
[667]	594
[1]	595	ENDIF
	596
	597	WRITE ( io, 300 ) runten, roben
	598
	599	IF ( .NOT. constant_diffusion ) THEN
	600	IF ( ibc_e_b == 1 ) THEN
	601	runten = 'e(0) = e(1)'
	602	ELSE
	603	runten = 'e(0) = e(1) = (u/0.1)*2'
	604	ENDIF
	605	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
	606
[97]	607	WRITE ( io, 301 ) 'e', runten, roben
[1]	608
	609	ENDIF
	610
[97]	611	IF ( ocean ) THEN
	612	runten = 'sa(0) = sa(1)'
	613	IF ( ibc_sa_t == 0 ) THEN
	614	roben = 'sa(nzt+1) = sa_surface'
[1]	615	ELSE
[97]	616	roben = 'sa(nzt+1) = sa(nzt)'
[1]	617	ENDIF
[97]	618	WRITE ( io, 301 ) 'sa', runten, roben
	619	ENDIF
[1]	620
[97]	621	IF ( humidity ) THEN
	622	IF ( ibc_q_b == 0 ) THEN
	623	runten = 'q(0) = q_surface'
	624	ELSE
	625	runten = 'q(0) = q(1)'
	626	ENDIF
	627	IF ( ibc_q_t == 0 ) THEN
	628	roben = 'q(nzt) = q_top'
	629	ELSE
	630	roben = 'q(nzt) = q(nzt-1) + dq/dz'
	631	ENDIF
	632	WRITE ( io, 301 ) 'q', runten, roben
	633	ENDIF
[1]	634
[97]	635	IF ( passive_scalar ) THEN
	636	IF ( ibc_q_b == 0 ) THEN
	637	runten = 's(0) = s_surface'
	638	ELSE
	639	runten = 's(0) = s(1)'
	640	ENDIF
	641	IF ( ibc_q_t == 0 ) THEN
	642	roben = 's(nzt) = s_top'
	643	ELSE
	644	roben = 's(nzt) = s(nzt-1) + ds/dz'
	645	ENDIF
	646	WRITE ( io, 301 ) 's', runten, roben
[1]	647	ENDIF
	648
	649	IF ( use_surface_fluxes ) THEN
	650	WRITE ( io, 303 )
	651	IF ( constant_heatflux ) THEN
	652	WRITE ( io, 306 ) surface_heatflux
	653	IF ( random_heatflux ) WRITE ( io, 307 )
	654	ENDIF
[75]	655	IF ( humidity .AND. constant_waterflux ) THEN
[1]	656	WRITE ( io, 311 ) surface_waterflux
	657	ENDIF
	658	IF ( passive_scalar .AND. constant_waterflux ) THEN
	659	WRITE ( io, 313 ) surface_waterflux
	660	ENDIF
	661	ENDIF
	662
[19]	663	IF ( use_top_fluxes ) THEN
	664	WRITE ( io, 304 )
[102]	665	IF ( coupling_mode == 'uncoupled' ) THEN
[151]	666	WRITE ( io, 320 ) top_momentumflux_u, top_momentumflux_v
[102]	667	IF ( constant_top_heatflux ) THEN
	668	WRITE ( io, 306 ) top_heatflux
	669	ENDIF
	670	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	671	WRITE ( io, 316 )
[19]	672	ENDIF
[97]	673	IF ( ocean .AND. constant_top_salinityflux ) THEN
	674	WRITE ( io, 309 ) top_salinityflux
	675	ENDIF
[75]	676	IF ( humidity .OR. passive_scalar ) THEN
[19]	677	WRITE ( io, 315 )
	678	ENDIF
	679	ENDIF
	680
[1]	681	IF ( prandtl_layer ) THEN
[667]	682	WRITE ( io, 305 ) (zu(1)-zu(0)), roughness_length, kappa, &
[94]	683	rif_min, rif_max
[1]	684	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
[75]	685	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
[1]	686	WRITE ( io, 312 )
	687	ENDIF
	688	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
	689	WRITE ( io, 314 )
	690	ENDIF
	691	ELSE
	692	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
	693	WRITE ( io, 310 ) rif_min, rif_max
	694	ENDIF
	695	ENDIF
	696
	697	WRITE ( io, 317 ) bc_lr, bc_ns
[707]	698	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
[1]	699	WRITE ( io, 318 ) outflow_damping_width, km_damp_max
[151]	700	IF ( turbulent_inflow ) THEN
	701	WRITE ( io, 319 ) recycling_width, recycling_plane, &
	702	inflow_damping_height, inflow_damping_width
	703	ENDIF
[1]	704	ENDIF
	705
	706	!
	707	!-- Listing of 1D-profiles
[151]	708	WRITE ( io, 325 ) dt_dopr_listing
[1]	709	IF ( averaging_interval_pr /= 0.0 ) THEN
[151]	710	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
[1]	711	ENDIF
	712
	713	!
	714	!-- DATA output
	715	WRITE ( io, 330 )
	716	IF ( averaging_interval_pr /= 0.0 ) THEN
[151]	717	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
[1]	718	ENDIF
	719
	720	!
	721	!-- 1D-profiles
[346]	722	dopr_chr = 'Profile:'
[1]	723	IF ( dopr_n /= 0 ) THEN
	724	WRITE ( io, 331 )
	725
	726	output_format = ''
	727	IF ( netcdf_output ) THEN
[493]	728	IF ( netcdf_data_format == 1 ) THEN
	729	output_format = 'NetCDF classic'
[1]	730	ELSE
[493]	731	output_format = 'NetCDF 64bit offset'
[1]	732	ENDIF
	733	ENDIF
	734	IF ( profil_output ) THEN
	735	IF ( netcdf_output ) THEN
	736	output_format = TRIM( output_format ) // ' and profil'
	737	ELSE
	738	output_format = 'profil'
	739	ENDIF
	740	ENDIF
[292]	741	WRITE ( io, 344 ) output_format
[1]	742
	743	DO i = 1, dopr_n
	744	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
	745	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
	746	WRITE ( io, 332 ) dopr_chr
	747	dopr_chr = ' :'
	748	ENDIF
	749	ENDDO
	750
	751	IF ( dopr_chr /= '' ) THEN
	752	WRITE ( io, 332 ) dopr_chr
	753	ENDIF
	754	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
	755	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
	756	ENDIF
	757
	758	!
	759	!-- 2D-arrays
	760	DO av = 0, 1
	761
	762	i = 1
	763	do2d_xy = ''
	764	do2d_xz = ''
	765	do2d_yz = ''
	766	DO WHILE ( do2d(av,i) /= ' ' )
	767
	768	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
	769	do2d_mode = do2d(av,i)(l-1:l)
	770
	771	SELECT CASE ( do2d_mode )
	772	CASE ( 'xy' )
	773	ll = LEN_TRIM( do2d_xy )
	774	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	775	CASE ( 'xz' )
	776	ll = LEN_TRIM( do2d_xz )
	777	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	778	CASE ( 'yz' )
	779	ll = LEN_TRIM( do2d_yz )
	780	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	781	END SELECT
	782
	783	i = i + 1
	784
	785	ENDDO
	786
	787	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
	788	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
	789	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
	790	( netcdf_output .OR. iso2d_output ) ) THEN
	791
	792	IF ( av == 0 ) THEN
	793	WRITE ( io, 334 ) ''
	794	ELSE
	795	WRITE ( io, 334 ) '(time-averaged)'
	796	ENDIF
	797
	798	IF ( do2d_at_begin ) THEN
	799	begin_chr = 'and at the start'
	800	ELSE
	801	begin_chr = ''
	802	ENDIF
	803
	804	output_format = ''
	805	IF ( netcdf_output ) THEN
[493]	806	IF ( netcdf_data_format == 1 ) THEN
	807	output_format = 'NetCDF classic'
	808	ELSEIF ( netcdf_data_format == 2 ) THEN
	809	output_format = 'NetCDF 64bit offset'
	810	ELSEIF ( netcdf_data_format == 3 ) THEN
	811	output_format = 'NetCDF4/HDF5'
	812	ELSEIF ( netcdf_data_format == 4 ) THEN
	813	output_format = 'NetCDF4/HDF5 clasic'
[1]	814	ENDIF
	815	ENDIF
	816	IF ( iso2d_output ) THEN
	817	IF ( netcdf_output ) THEN
	818	output_format = TRIM( output_format ) // ' and iso2d'
	819	ELSE
	820	output_format = 'iso2d'
	821	ENDIF
	822	ENDIF
[292]	823	WRITE ( io, 344 ) output_format
[1]	824
	825	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
	826	i = 1
	827	slices = '/'
	828	coordinates = '/'
	829	!
	830	!-- Building strings with index and coordinate informations of the
	831	!-- slices
	832	DO WHILE ( section(i,1) /= -9999 )
	833
	834	WRITE (section_chr,'(I5)') section(i,1)
	835	section_chr = ADJUSTL( section_chr )
	836	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	837
[206]	838	IF ( section(i,1) == -1 ) THEN
	839	WRITE (coor_chr,'(F10.1)') -1.0
	840	ELSE
	841	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
	842	ENDIF
[1]	843	coor_chr = ADJUSTL( coor_chr )
	844	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	845
	846	i = i + 1
	847	ENDDO
	848	IF ( av == 0 ) THEN
	849	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
	850	TRIM( begin_chr ), 'k', TRIM( slices ), &
	851	TRIM( coordinates )
	852	IF ( skip_time_do2d_xy /= 0.0 ) THEN
	853	WRITE ( io, 339 ) skip_time_do2d_xy
	854	ENDIF
	855	ELSE
	856	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
	857	TRIM( begin_chr ), averaging_interval, &
	858	dt_averaging_input, 'k', TRIM( slices ), &
	859	TRIM( coordinates )
	860	IF ( skip_time_data_output_av /= 0.0 ) THEN
	861	WRITE ( io, 339 ) skip_time_data_output_av
	862	ENDIF
	863	ENDIF
	864
	865	ENDIF
	866
	867	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
	868	i = 1
	869	slices = '/'
	870	coordinates = '/'
	871	!
	872	!-- Building strings with index and coordinate informations of the
	873	!-- slices
	874	DO WHILE ( section(i,2) /= -9999 )
	875
	876	WRITE (section_chr,'(I5)') section(i,2)
	877	section_chr = ADJUSTL( section_chr )
	878	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	879
	880	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
	881	coor_chr = ADJUSTL( coor_chr )
	882	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	883
	884	i = i + 1
	885	ENDDO
	886	IF ( av == 0 ) THEN
	887	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
	888	TRIM( begin_chr ), 'j', TRIM( slices ), &
	889	TRIM( coordinates )
	890	IF ( skip_time_do2d_xz /= 0.0 ) THEN
	891	WRITE ( io, 339 ) skip_time_do2d_xz
	892	ENDIF
	893	ELSE
	894	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
	895	TRIM( begin_chr ), averaging_interval, &
	896	dt_averaging_input, 'j', TRIM( slices ), &
	897	TRIM( coordinates )
	898	IF ( skip_time_data_output_av /= 0.0 ) THEN
	899	WRITE ( io, 339 ) skip_time_data_output_av
	900	ENDIF
	901	ENDIF
	902	ENDIF
	903
	904	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
	905	i = 1
	906	slices = '/'
	907	coordinates = '/'
	908	!
	909	!-- Building strings with index and coordinate informations of the
	910	!-- slices
	911	DO WHILE ( section(i,3) /= -9999 )
	912
	913	WRITE (section_chr,'(I5)') section(i,3)
	914	section_chr = ADJUSTL( section_chr )
	915	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	916
	917	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
	918	coor_chr = ADJUSTL( coor_chr )
	919	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	920
	921	i = i + 1
	922	ENDDO
	923	IF ( av == 0 ) THEN
	924	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
	925	TRIM( begin_chr ), 'i', TRIM( slices ), &
	926	TRIM( coordinates )
	927	IF ( skip_time_do2d_yz /= 0.0 ) THEN
	928	WRITE ( io, 339 ) skip_time_do2d_yz
	929	ENDIF
	930	ELSE
	931	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
	932	TRIM( begin_chr ), averaging_interval, &
	933	dt_averaging_input, 'i', TRIM( slices ), &
	934	TRIM( coordinates )
	935	IF ( skip_time_data_output_av /= 0.0 ) THEN
	936	WRITE ( io, 339 ) skip_time_data_output_av
	937	ENDIF
	938	ENDIF
	939	ENDIF
	940
	941	ENDIF
	942
	943	ENDDO
	944
	945	!
	946	!-- 3d-arrays
	947	DO av = 0, 1
	948
	949	i = 1
	950	do3d_chr = ''
	951	DO WHILE ( do3d(av,i) /= ' ' )
	952
	953	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
	954	i = i + 1
	955
	956	ENDDO
	957
	958	IF ( do3d_chr /= '' ) THEN
	959	IF ( av == 0 ) THEN
	960	WRITE ( io, 336 ) ''
	961	ELSE
	962	WRITE ( io, 336 ) '(time-averaged)'
	963	ENDIF
	964
	965	output_format = ''
	966	IF ( netcdf_output ) THEN
[493]	967	IF ( netcdf_data_format == 1 ) THEN
	968	output_format = 'NetCDF classic'
	969	ELSEIF ( netcdf_data_format == 2 ) THEN
	970	output_format = 'NetCDF 64bit offset'
	971	ELSEIF ( netcdf_data_format == 3 ) THEN
	972	output_format = 'NetCDF4/HDF5'
	973	ELSEIF ( netcdf_data_format == 4 ) THEN
	974	output_format = 'NetCDF4/HDF5 clasic'
[1]	975	ENDIF
	976	ENDIF
	977	IF ( avs_output ) THEN
	978	IF ( netcdf_output ) THEN
	979	output_format = TRIM( output_format ) // ' and avs'
	980	ELSE
	981	output_format = 'avs'
	982	ENDIF
	983	ENDIF
[292]	984	WRITE ( io, 344 ) output_format
[1]	985
	986	IF ( do3d_at_begin ) THEN
	987	begin_chr = 'and at the start'
	988	ELSE
	989	begin_chr = ''
	990	ENDIF
	991	IF ( av == 0 ) THEN
	992	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
	993	zu(nz_do3d), nz_do3d
	994	ELSE
	995	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
	996	TRIM( begin_chr ), averaging_interval, &
	997	dt_averaging_input, zu(nz_do3d), nz_do3d
	998	ENDIF
	999
	1000	IF ( do3d_compress ) THEN
	1001	do3d_chr = ''
	1002	i = 1
	1003	DO WHILE ( do3d(av,i) /= ' ' )
	1004
	1005	SELECT CASE ( do3d(av,i) )
	1006	CASE ( 'u' )
	1007	j = 1
	1008	CASE ( 'v' )
	1009	j = 2
	1010	CASE ( 'w' )
	1011	j = 3
	1012	CASE ( 'p' )
	1013	j = 4
	1014	CASE ( 'pt' )
	1015	j = 5
	1016	END SELECT
	1017	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
	1018	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
	1019	':' // prec // ','
	1020	i = i + 1
	1021
	1022	ENDDO
	1023	WRITE ( io, 338 ) do3d_chr
	1024
	1025	ENDIF
	1026
	1027	IF ( av == 0 ) THEN
	1028	IF ( skip_time_do3d /= 0.0 ) THEN
	1029	WRITE ( io, 339 ) skip_time_do3d
	1030	ENDIF
	1031	ELSE
	1032	IF ( skip_time_data_output_av /= 0.0 ) THEN
	1033	WRITE ( io, 339 ) skip_time_data_output_av
	1034	ENDIF
	1035	ENDIF
	1036
	1037	ENDIF
	1038
	1039	ENDDO
	1040
	1041	!
[410]	1042	!-- masked arrays
	1043	IF ( masks > 0 ) WRITE ( io, 345 ) &
	1044	mask_scale_x, mask_scale_y, mask_scale_z
	1045	DO mid = 1, masks
	1046	DO av = 0, 1
	1047
	1048	i = 1
	1049	domask_chr = ''
	1050	DO WHILE ( domask(mid,av,i) /= ' ' )
	1051	domask_chr = TRIM( domask_chr ) // ' ' // &
	1052	TRIM( domask(mid,av,i) ) // ','
	1053	i = i + 1
	1054	ENDDO
	1055
	1056	IF ( domask_chr /= '' ) THEN
	1057	IF ( av == 0 ) THEN
	1058	WRITE ( io, 346 ) '', mid
	1059	ELSE
	1060	WRITE ( io, 346 ) ' (time-averaged)', mid
	1061	ENDIF
	1062
	1063	output_format = ''
	1064	IF ( netcdf_output ) THEN
[493]	1065	IF ( netcdf_data_format == 1 ) THEN
	1066	output_format = 'NetCDF classic'
	1067	ELSEIF ( netcdf_data_format == 2 ) THEN
	1068	output_format = 'NetCDF 64bit offset'
	1069	ELSEIF ( netcdf_data_format == 3 ) THEN
	1070	output_format = 'NetCDF4/HDF5'
	1071	ELSEIF ( netcdf_data_format == 4 ) THEN
	1072	output_format = 'NetCDF4/HDF5 clasic'
	1073	ENDIF
[410]	1074	ENDIF
	1075	WRITE ( io, 344 ) output_format
	1076
	1077	IF ( av == 0 ) THEN
	1078	WRITE ( io, 347 ) domask_chr, dt_domask(mid)
	1079	ELSE
	1080	WRITE ( io, 348 ) domask_chr, dt_data_output_av, &
	1081	averaging_interval, dt_averaging_input
	1082	ENDIF
	1083
	1084	IF ( av == 0 ) THEN
	1085	IF ( skip_time_domask(mid) /= 0.0 ) THEN
	1086	WRITE ( io, 339 ) skip_time_domask(mid)
	1087	ENDIF
	1088	ELSE
	1089	IF ( skip_time_data_output_av /= 0.0 ) THEN
	1090	WRITE ( io, 339 ) skip_time_data_output_av
	1091	ENDIF
	1092	ENDIF
	1093	!
	1094	!-- output locations
	1095	DO dim = 1, 3
	1096	IF ( mask(mid,dim,1) >= 0.0 ) THEN
	1097	count = 0
	1098	DO WHILE ( mask(mid,dim,count+1) >= 0.0 )
	1099	count = count + 1
	1100	ENDDO
	1101	WRITE ( io, 349 ) dir(dim), dir(dim), mid, dir(dim), &
	1102	mask(mid,dim,:count)
	1103	ELSEIF ( mask_loop(mid,dim,1) < 0.0 .AND. &
	1104	mask_loop(mid,dim,2) < 0.0 .AND. &
	1105	mask_loop(mid,dim,3) == 0.0 ) THEN
	1106	WRITE ( io, 350 ) dir(dim), dir(dim)
	1107	ELSEIF ( mask_loop(mid,dim,3) == 0.0 ) THEN
	1108	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
	1109	mask_loop(mid,dim,1:2)
	1110	ELSE
	1111	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
	1112	mask_loop(mid,dim,1:3)
	1113	ENDIF
	1114	ENDDO
	1115	ENDIF
	1116
	1117	ENDDO
	1118	ENDDO
	1119
	1120	!
[1]	1121	!-- Timeseries
	1122	IF ( dt_dots /= 9999999.9 ) THEN
	1123	WRITE ( io, 340 )
	1124
	1125	output_format = ''
	1126	IF ( netcdf_output ) THEN
[493]	1127	IF ( netcdf_data_format == 1 ) THEN
	1128	output_format = 'NetCDF classic'
[1]	1129	ELSE
[493]	1130	output_format = 'NetCDF 64bit offset'
[1]	1131	ENDIF
	1132	ENDIF
	1133	IF ( profil_output ) THEN
	1134	IF ( netcdf_output ) THEN
	1135	output_format = TRIM( output_format ) // ' and profil'
	1136	ELSE
	1137	output_format = 'profil'
	1138	ENDIF
	1139	ENDIF
[292]	1140	WRITE ( io, 344 ) output_format
[1]	1141	WRITE ( io, 341 ) dt_dots
	1142	ENDIF
	1143
	1144	#if defined( __dvrp_graphics )
	1145	!
	1146	!-- Dvrp-output
	1147	IF ( dt_dvrp /= 9999999.9 ) THEN
	1148	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
	1149	TRIM( dvrp_username ), TRIM( dvrp_directory )
	1150	i = 1
	1151	l = 0
[336]	1152	m = 0
[1]	1153	DO WHILE ( mode_dvrp(i) /= ' ' )
	1154	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
[130]	1155	READ ( mode_dvrp(i), '(10X,I2)' ) j
[1]	1156	l = l + 1
	1157	IF ( do3d(0,j) /= ' ' ) THEN
[336]	1158	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l), &
	1159	isosurface_color(:,l)
[1]	1160	ENDIF
	1161	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
[130]	1162	READ ( mode_dvrp(i), '(6X,I2)' ) j
[336]	1163	m = m + 1
	1164	IF ( do2d(0,j) /= ' ' ) THEN
	1165	WRITE ( io, 362 ) TRIM( do2d(0,j) ), &
	1166	slicer_range_limits_dvrp(:,m)
	1167	ENDIF
[1]	1168	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
[336]	1169	WRITE ( io, 363 ) dvrp_psize
	1170	IF ( particle_dvrpsize /= 'none' ) THEN
	1171	WRITE ( io, 364 ) 'size', TRIM( particle_dvrpsize ), &
	1172	dvrpsize_interval
	1173	ENDIF
	1174	IF ( particle_color /= 'none' ) THEN
	1175	WRITE ( io, 364 ) 'color', TRIM( particle_color ), &
	1176	color_interval
	1177	ENDIF
[1]	1178	ENDIF
	1179	i = i + 1
	1180	ENDDO
[237]	1181
[336]	1182	WRITE ( io, 365 ) groundplate_color, superelevation_x, &
	1183	superelevation_y, superelevation, clip_dvrp_l, &
	1184	clip_dvrp_r, clip_dvrp_s, clip_dvrp_n
	1185
	1186	IF ( TRIM( topography ) /= 'flat' ) THEN
	1187	WRITE ( io, 366 ) topography_color
	1188	IF ( cluster_size > 1 ) THEN
	1189	WRITE ( io, 367 ) cluster_size
	1190	ENDIF
[237]	1191	ENDIF
	1192
[1]	1193	ENDIF
	1194	#endif
	1195
	1196	#if defined( __spectra )
	1197	!
	1198	!-- Spectra output
	1199	IF ( dt_dosp /= 9999999.9 ) THEN
	1200	WRITE ( io, 370 )
	1201
	1202	output_format = ''
	1203	IF ( netcdf_output ) THEN
[493]	1204	IF ( netcdf_data_format == 1 ) THEN
	1205	output_format = 'NetCDF classic'
[1]	1206	ELSE
[493]	1207	output_format = 'NetCDF 64bit offset'
[1]	1208	ENDIF
	1209	ENDIF
	1210	IF ( profil_output ) THEN
	1211	IF ( netcdf_output ) THEN
	1212	output_format = TRIM( output_format ) // ' and profil'
	1213	ELSE
	1214	output_format = 'profil'
	1215	ENDIF
	1216	ENDIF
[292]	1217	WRITE ( io, 344 ) output_format
[1]	1218	WRITE ( io, 371 ) dt_dosp
	1219	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
	1220	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
	1221	( spectra_direction(i), i = 1,10 ), &
[189]	1222	( comp_spectra_level(i), i = 1,100 ), &
	1223	( plot_spectra_level(i), i = 1,100 ), &
[1]	1224	averaging_interval_sp, dt_averaging_input_pr
	1225	ENDIF
	1226	#endif
	1227
	1228	WRITE ( io, 99 )
	1229
	1230	!
	1231	!-- Physical quantities
	1232	WRITE ( io, 400 )
	1233
	1234	!
	1235	!-- Geostrophic parameters
	1236	WRITE ( io, 410 ) omega, phi, f, fs
	1237
	1238	!
	1239	!-- Other quantities
	1240	WRITE ( io, 411 ) g
[97]	1241	IF ( use_reference ) THEN
	1242	IF ( ocean ) THEN
	1243	WRITE ( io, 412 ) prho_reference
	1244	ELSE
	1245	WRITE ( io, 413 ) pt_reference
	1246	ENDIF
	1247	ENDIF
[1]	1248
	1249	!
	1250	!-- Cloud physics parameters
	1251	IF ( cloud_physics ) THEN
[57]	1252	WRITE ( io, 415 )
	1253	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
[1]	1254	ENDIF
	1255
	1256	!-- Profile of the geostrophic wind (component ug)
	1257	!-- Building output strings
	1258	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
	1259	gradients = '------'
	1260	slices = ' 0'
	1261	coordinates = ' 0.0'
	1262	i = 1
	1263	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
	1264
[167]	1265	WRITE (coor_chr,'(F6.2,1X)') ug(ug_vertical_gradient_level_ind(i))
[1]	1266	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
	1267
[167]	1268	WRITE (coor_chr,'(F6.2,1X)') ug_vertical_gradient(i)
[1]	1269	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1270
[167]	1271	WRITE (coor_chr,'(I6,1X)') ug_vertical_gradient_level_ind(i)
[1]	1272	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1273
[167]	1274	WRITE (coor_chr,'(F6.1,1X)') ug_vertical_gradient_level(i)
[1]	1275	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1276
[430]	1277	IF ( i == 10 ) THEN
	1278	EXIT
	1279	ELSE
	1280	i = i + 1
	1281	ENDIF
	1282
[1]	1283	ENDDO
	1284
	1285	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
	1286	TRIM( gradients ), TRIM( slices )
	1287
	1288	!-- Profile of the geostrophic wind (component vg)
	1289	!-- Building output strings
	1290	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
	1291	gradients = '------'
	1292	slices = ' 0'
	1293	coordinates = ' 0.0'
	1294	i = 1
	1295	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
	1296
[167]	1297	WRITE (coor_chr,'(F6.2,1X)') vg(vg_vertical_gradient_level_ind(i))
[1]	1298	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
	1299
[167]	1300	WRITE (coor_chr,'(F6.2,1X)') vg_vertical_gradient(i)
[1]	1301	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1302
[167]	1303	WRITE (coor_chr,'(I6,1X)') vg_vertical_gradient_level_ind(i)
[1]	1304	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1305
[167]	1306	WRITE (coor_chr,'(F6.1,1X)') vg_vertical_gradient_level(i)
[1]	1307	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1308
[430]	1309	IF ( i == 10 ) THEN
	1310	EXIT
	1311	ELSE
	1312	i = i + 1
	1313	ENDIF
	1314
[1]	1315	ENDDO
	1316
	1317	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
	1318	TRIM( gradients ), TRIM( slices )
	1319
	1320	!
	1321	!-- Initial temperature profile
	1322	!-- Building output strings, starting with surface temperature
	1323	WRITE ( temperatures, '(F6.2)' ) pt_surface
	1324	gradients = '------'
	1325	slices = ' 0'
	1326	coordinates = ' 0.0'
	1327	i = 1
	1328	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
	1329
[94]	1330	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
	1331	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
[1]	1332
[94]	1333	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
	1334	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
[1]	1335
[94]	1336	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
	1337	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
[1]	1338
[94]	1339	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
	1340	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
[1]	1341
[430]	1342	IF ( i == 10 ) THEN
	1343	EXIT
	1344	ELSE
	1345	i = i + 1
	1346	ENDIF
	1347
[1]	1348	ENDDO
	1349
	1350	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
	1351	TRIM( gradients ), TRIM( slices )
	1352
	1353	!
	1354	!-- Initial humidity profile
	1355	!-- Building output strings, starting with surface humidity
[75]	1356	IF ( humidity .OR. passive_scalar ) THEN
[1]	1357	WRITE ( temperatures, '(E8.1)' ) q_surface
	1358	gradients = '--------'
	1359	slices = ' 0'
	1360	coordinates = ' 0.0'
	1361	i = 1
	1362	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
	1363
	1364	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
	1365	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1366
	1367	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
	1368	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1369
	1370	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
	1371	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1372
	1373	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
	1374	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1375
[430]	1376	IF ( i == 10 ) THEN
	1377	EXIT
	1378	ELSE
	1379	i = i + 1
	1380	ENDIF
	1381
[1]	1382	ENDDO
	1383
[75]	1384	IF ( humidity ) THEN
[1]	1385	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
	1386	TRIM( gradients ), TRIM( slices )
	1387	ELSE
	1388	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
	1389	TRIM( gradients ), TRIM( slices )
	1390	ENDIF
	1391	ENDIF
	1392
	1393	!
[97]	1394	!-- Initial salinity profile
	1395	!-- Building output strings, starting with surface salinity
	1396	IF ( ocean ) THEN
	1397	WRITE ( temperatures, '(F6.2)' ) sa_surface
	1398	gradients = '------'
	1399	slices = ' 0'
	1400	coordinates = ' 0.0'
	1401	i = 1
	1402	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
	1403
	1404	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
	1405	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1406
	1407	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
	1408	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1409
	1410	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
	1411	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1412
	1413	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
	1414	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1415
[430]	1416	IF ( i == 10 ) THEN
	1417	EXIT
	1418	ELSE
	1419	i = i + 1
	1420	ENDIF
	1421
[97]	1422	ENDDO
	1423
	1424	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
	1425	TRIM( gradients ), TRIM( slices )
	1426	ENDIF
	1427
	1428	!
[411]	1429	!-- Profile for the large scale vertial velocity
	1430	!-- Building output strings, starting with surface value
	1431	IF ( large_scale_subsidence ) THEN
	1432	temperatures = ' 0.0'
	1433	gradients = '------'
	1434	slices = ' 0'
	1435	coordinates = ' 0.0'
	1436	i = 1
[580]	1437	DO WHILE ( subs_vertical_gradient_level_i(i) /= -9999 )
[411]	1438
	1439	WRITE (coor_chr,'(E10.2,7X)') &
[580]	1440	w_subs(subs_vertical_gradient_level_i(i))
[411]	1441	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1442
[580]	1443	WRITE (coor_chr,'(E10.2,7X)') subs_vertical_gradient(i)
[411]	1444	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1445
[580]	1446	WRITE (coor_chr,'(I10,7X)') subs_vertical_gradient_level_i(i)
[411]	1447	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1448
[580]	1449	WRITE (coor_chr,'(F10.2,7X)') subs_vertical_gradient_level(i)
[411]	1450	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1451
[430]	1452	IF ( i == 10 ) THEN
	1453	EXIT
	1454	ELSE
	1455	i = i + 1
	1456	ENDIF
	1457
[411]	1458	ENDDO
	1459
	1460	WRITE ( io, 426 ) TRIM( coordinates ), TRIM( temperatures ), &
	1461	TRIM( gradients ), TRIM( slices )
	1462	ENDIF
	1463
	1464	!
[1]	1465	!-- LES / turbulence parameters
	1466	WRITE ( io, 450 )
	1467
	1468	!--
	1469	! ... LES-constants used must still be added here
	1470	!--
	1471	IF ( constant_diffusion ) THEN
	1472	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
	1473	prandtl_number
	1474	ENDIF
	1475	IF ( .NOT. constant_diffusion) THEN
[108]	1476	IF ( e_init > 0.0 ) WRITE ( io, 455 ) e_init
[1]	1477	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
	1478	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
	1479	IF ( adjust_mixing_length .AND. prandtl_layer ) WRITE ( io, 452 )
	1480	ENDIF
	1481
	1482	!
	1483	!-- Special actions during the run
	1484	WRITE ( io, 470 )
	1485	IF ( create_disturbances ) THEN
	1486	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
	1487	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
	1488	zu(disturbance_level_ind_t), disturbance_level_ind_t
[707]	1489	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
[1]	1490	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
	1491	ELSE
	1492	WRITE ( io, 473 ) disturbance_energy_limit
	1493	ENDIF
	1494	WRITE ( io, 474 ) TRIM( random_generator )
	1495	ENDIF
	1496	IF ( pt_surface_initial_change /= 0.0 ) THEN
	1497	WRITE ( io, 475 ) pt_surface_initial_change
	1498	ENDIF
[75]	1499	IF ( humidity .AND. q_surface_initial_change /= 0.0 ) THEN
[1]	1500	WRITE ( io, 476 ) q_surface_initial_change
	1501	ENDIF
	1502	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
	1503	WRITE ( io, 477 ) q_surface_initial_change
	1504	ENDIF
	1505
[60]	1506	IF ( particle_advection ) THEN
[1]	1507	!
[60]	1508	!-- Particle attributes
	1509	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
	1510	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
[117]	1511	end_time_prel, dt_sort_particles
[60]	1512	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
	1513	IF ( random_start_position ) WRITE ( io, 481 )
	1514	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
	1515	WRITE ( io, 495 ) total_number_of_particles
	1516	IF ( maximum_number_of_tailpoints /= 0 ) THEN
	1517	WRITE ( io, 483 ) maximum_number_of_tailpoints
	1518	IF ( minimum_tailpoint_distance /= 0 ) THEN
	1519	WRITE ( io, 484 ) total_number_of_tails, &
	1520	minimum_tailpoint_distance, &
	1521	maximum_tailpoint_age
	1522	ENDIF
[1]	1523	ENDIF
[60]	1524	IF ( dt_write_particle_data /= 9999999.9 ) THEN
	1525	WRITE ( io, 485 ) dt_write_particle_data
	1526	output_format = ''
	1527	IF ( netcdf_output ) THEN
[493]	1528	IF ( netcdf_data_format > 1 ) THEN
[60]	1529	output_format = 'netcdf (64 bit offset) and binary'
	1530	ELSE
	1531	output_format = 'netcdf and binary'
	1532	ENDIF
[1]	1533	ELSE
[60]	1534	output_format = 'binary'
[1]	1535	ENDIF
[292]	1536	WRITE ( io, 344 ) output_format
[1]	1537	ENDIF
[60]	1538	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
	1539	IF ( write_particle_statistics ) WRITE ( io, 486 )
[1]	1540
[60]	1541	WRITE ( io, 487 ) number_of_particle_groups
[1]	1542
[60]	1543	DO i = 1, number_of_particle_groups
	1544	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
	1545	WRITE ( io, 490 ) i, 0.0
	1546	WRITE ( io, 492 )
[1]	1547	ELSE
[60]	1548	WRITE ( io, 490 ) i, radius(i)
	1549	IF ( density_ratio(i) /= 0.0 ) THEN
	1550	WRITE ( io, 491 ) density_ratio(i)
	1551	ELSE
	1552	WRITE ( io, 492 )
	1553	ENDIF
[1]	1554	ENDIF
[60]	1555	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
	1556	pdx(i), pdy(i), pdz(i)
[336]	1557	IF ( .NOT. vertical_particle_advection(i) ) WRITE ( io, 482 )
[60]	1558	ENDDO
[1]	1559
[60]	1560	ENDIF
[1]	1561
[60]	1562
[1]	1563	!
	1564	!-- Parameters of 1D-model
	1565	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
	1566	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
	1567	mixing_length_1d, dissipation_1d
	1568	IF ( damp_level_ind_1d /= nzt+1 ) THEN
	1569	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
	1570	ENDIF
	1571	ENDIF
	1572
	1573	!
	1574	!-- User-defined informations
	1575	CALL user_header( io )
	1576
	1577	WRITE ( io, 99 )
	1578
	1579	!
	1580	!-- Write buffer contents to disc immediately
[82]	1581	CALL local_flush( io )
[1]	1582
	1583	!
	1584	!-- Here the FORMATs start
	1585
	1586	99 FORMAT (1X,78('-'))
[200]	1587	100 FORMAT (/1X,'***************************',9X,42('-')/ &
	1588	1X,'* ',A,' *',9X,A/ &
	1589	1X,'***************************',9X,42('-'))
[291]	1590	101 FORMAT (37X,'coupled run using MPI-',I1,': ',A/ &
[102]	1591	37X,42('-'))
[200]	1592	102 FORMAT (/' Date: ',A8,9X,'Run: ',A20/ &
	1593	' Time: ',A8,9X,'Run-No.: ',I2.2/ &
	1594	' Run on host: ',A10)
[1]	1595	#if defined( __parallel )
[200]	1596	103 FORMAT (' Number of PEs:',8X,I5,9X,'Processor grid (x,y): (',I3,',',I3, &
[1]	1597	')',1X,A)
[200]	1598	104 FORMAT (' Number of PEs:',8X,I5,9X,'Tasks:',I4,' threads per task:',I4/ &
[1]	1599	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
[102]	1600	105 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
	1601	106 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
[1]	1602	37X,'because the job is running on an SMP-cluster')
[102]	1603	107 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
[759]	1604	108 FORMAT (37X,'Max. # of parallel I/O streams is ',I5)
[1]	1605	#endif
	1606	110 FORMAT (/' Numerical Schemes:'/ &
	1607	' -----------------'/)
	1608	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
	1609	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
	1610	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
	1611	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
	1612	' or Upstream')
	1613	114 FORMAT (' --> Momentum advection via Upstream-Spline-Scheme')
	1614	115 FORMAT (' Tendencies are smoothed via Long-Filter with factor ',F5.3)
	1615	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
	1616	' or Upstream')
	1617	117 FORMAT (' --> Scalar advection via Upstream-Spline-Scheme')
	1618	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
	1619	119 FORMAT (' --> Galilei-Transform applied to horizontal advection', &
	1620	' Translation velocity = ',A/ &
	1621	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
	1622	120 FORMAT (' --> Time differencing scheme: leapfrog only (no euler in case', &
	1623	' of timestep changes)')
	1624	121 FORMAT (' --> Time differencing scheme: leapfrog + euler in case of', &
	1625	' timestep changes')
	1626	122 FORMAT (' --> Time differencing scheme: ',A)
[108]	1627	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
[1]	1628	' maximum damping coefficient: ',F5.3, ' 1/s')
	1629	124 FORMAT (' Spline-overshoots are being suppressed')
	1630	125 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
	1631	' of'/ &
	1632	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
	1633	126 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
	1634	' of'/ &
	1635	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
	1636	127 FORMAT (' The following absolute overshoot differences are tolerated:'/&
	1637	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
	1638	128 FORMAT (' The following absolute overshoot differences are tolerated:'/&
	1639	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
	1640	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
	1641	130 FORMAT (' --> Additional prognostic equation for the total water content')
	1642	131 FORMAT (' --> Parameterization of condensation processes via (0%-or100%)')
	1643	132 FORMAT (' --> Parameterization of long-wave radiation processes via'/ &
	1644	' effective emissivity scheme')
	1645	133 FORMAT (' --> Precipitation parameterization via Kessler-Scheme')
	1646	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
	1647	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
	1648	A,'-cycle)'/ &
	1649	' number of grid levels: ',I2/ &
	1650	' Gauss-Seidel red/black iterations: ',I2)
	1651	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1652	I3,')')
	1653	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
	1654	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1655	I3,')'/ &
	1656	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
	1657	I3,')')
	1658	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
[63]	1659	139 FORMAT (' --> Loop optimization method: ',A)
[1]	1660	140 FORMAT (' maximum residual allowed: ',E10.3)
	1661	141 FORMAT (' fixed number of multigrid cycles: ',I4)
	1662	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
	1663	'step')
[87]	1664	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
	1665	'kinetic energy')
[1]	1666	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
[241]	1667	'conserved'/ &
	1668	' using the ',A,' mode')
	1669	151 FORMAT (' with u_bulk = ',F7.3,' m/s and v_bulk = ',F7.3,' m/s')
[306]	1670	152 FORMAT (' --> External pressure gradient directly prescribed by the user:',&
	1671	/' ',2(1X,E12.5),'Pa/m in x/y direction', &
	1672	/' starting from dp_level_b =', F8.3, 'm', A /)
[411]	1673	153 FORMAT (' --> Large-scale vertical motion is used in the ', &
	1674	'prognostic equation for')
	1675	154 FORMAT (' the potential temperature')
[1]	1676	200 FORMAT (//' Run time and time step information:'/ &
	1677	' ----------------------------------'/)
	1678	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
	1679	' CFL-factor: ',F4.2)
	1680	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
	1681	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
	1682	' End time: ',F9.3,' s')
	1683	204 FORMAT ( A,F9.3,' s')
	1684	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
	1685	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
	1686	' CPU-time used: ',F9.3,' s per timestep: ', &
	1687	' ',F9.3,' s'/ &
	1688	' per second of simulated tim', &
	1689	'e: ',F9.3,' s')
[291]	1690	207 FORMAT ( A/' Coupling start time:',F9.3,' s')
[1]	1691	250 FORMAT (//' Computational grid and domain size:'/ &
	1692	' ----------------------------------'// &
	1693	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
	1694	' m dz = ',F7.3,' m'/ &
	1695	' Domain size: x = ',F10.3,' m y = ',F10.3, &
	1696	' m z(u) = ',F10.3,' m'/)
	1697	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
	1698	' factor: ',F5.3/ &
	1699	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
	1700	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
	1701	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
	1702	255 FORMAT (' Subdomains have equal size')
	1703	256 FORMAT (' Subdomains at the upper edges of the virtual processor grid ', &
	1704	'have smaller sizes'/ &
	1705	' Size of smallest subdomain: ( ',I4,', ',I4,', ',I4,')')
	1706	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
	1707	' degrees')
	1708	270 FORMAT (//' Topography informations:'/ &
	1709	' -----------------------'// &
	1710	1X,'Topography: ',A)
	1711	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
	1712	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
	1713	' / ',I4)
[240]	1714	272 FORMAT ( ' Single quasi-2D street canyon of infinite length in ',A, &
	1715	' direction' / &
	1716	' Canyon height: ', F6.2, 'm, ch = ', I4, '.' / &
	1717	' Canyon position (',A,'-walls): cxl = ', I4,', cxr = ', I4, '.')
[256]	1718	278 FORMAT (' Topography grid definition convention:'/ &
	1719	' cell edge (staggered grid points'/ &
	1720	' (u in x-direction, v in y-direction))' /)
	1721	279 FORMAT (' Topography grid definition convention:'/ &
	1722	' cell center (scalar grid points)' /)
[138]	1723	280 FORMAT (//' Vegetation canopy (drag) model:'/ &
	1724	' ------------------------------'// &
	1725	' Canopy mode: ', A / &
	1726	' Canopy top: ',I4 / &
	1727	' Leaf drag coefficient: ',F6.2 /)
[153]	1728	281 FORMAT (/ ' Scalar_exchange_coefficient: ',F6.2 / &
	1729	' Scalar concentration at leaf surfaces in kg/m**3: ',F6.2 /)
	1730	282 FORMAT (' Predefined constant heatflux at the top of the vegetation: ',F6.2,' K m/s')
	1731	283 FORMAT (/ ' Characteristic levels of the leaf area density:'// &
[138]	1732	' Height: ',A,' m'/ &
	1733	' Leaf area density: ',A,' m2/m3'/ &
	1734	' Gradient: ',A,' m2/m4'/ &
	1735	' Gridpoint: ',A)
	1736
[1]	1737	300 FORMAT (//' Boundary conditions:'/ &
	1738	' -------------------'// &
	1739	' p uv ', &
	1740	' pt'// &
	1741	' B. bound.: ',A/ &
	1742	' T. bound.: ',A)
[97]	1743	301 FORMAT (/' ',A// &
[1]	1744	' B. bound.: ',A/ &
	1745	' T. bound.: ',A)
[19]	1746	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
	1747	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
	1748	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
	1749	'computational u,v-level:'// &
[1]	1750	' zp = ',F6.2,' m z0 = ',F6.4,' m kappa = ',F4.2/ &
	1751	' Rif value range: ',F6.2,' <= rif <=',F6.2)
[97]	1752	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
[1]	1753	307 FORMAT (' Heatflux has a random normal distribution')
	1754	308 FORMAT (' Predefined surface temperature')
[97]	1755	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
[1]	1756	310 FORMAT (//' 1D-Model:'// &
	1757	' Rif value range: ',F6.2,' <= rif <=',F6.2)
	1758	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
	1759	312 FORMAT (' Predefined surface humidity')
	1760	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
	1761	314 FORMAT (' Predefined scalar value at the surface')
[19]	1762	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
[102]	1763	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
	1764	'atmosphere model')
[1]	1765	317 FORMAT (//' Lateral boundaries:'/ &
	1766	' left/right: ',A/ &
	1767	' north/south: ',A)
	1768	318 FORMAT (/' outflow damping layer width: ',I3,' gridpoints with km_', &
	1769	'max =',F5.1,' m**2/s')
[151]	1770	319 FORMAT (' turbulence recycling at inflow switched on'/ &
	1771	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
	1772	' inflow damping height: ',F6.1,' m width: ',F6.1,' m')
	1773	320 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
[103]	1774	' v: ',F9.6,' m2/s2')
[151]	1775	325 FORMAT (//' List output:'/ &
[1]	1776	' -----------'// &
	1777	' 1D-Profiles:'/ &
	1778	' Output every ',F8.2,' s')
[151]	1779	326 FORMAT (' Time averaged over ',F8.2,' s'/ &
[1]	1780	' Averaging input every ',F8.2,' s')
	1781	330 FORMAT (//' Data output:'/ &
	1782	' -----------'/)
	1783	331 FORMAT (/' 1D-Profiles:')
	1784	332 FORMAT (/' ',A)
	1785	333 FORMAT (' Output every ',F8.2,' s',/ &
	1786	' Time averaged over ',F8.2,' s'/ &
	1787	' Averaging input every ',F8.2,' s')
	1788	334 FORMAT (/' 2D-Arrays',A,':')
	1789	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1790	' Output every ',F8.2,' s ',A/ &
	1791	' Cross sections at ',A1,' = ',A/ &
	1792	' scalar-coordinates: ',A,' m'/)
	1793	336 FORMAT (/' 3D-Arrays',A,':')
	1794	337 FORMAT (/' Arrays: ',A/ &
	1795	' Output every ',F8.2,' s ',A/ &
	1796	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
	1797	338 FORMAT (' Compressed data output'/ &
	1798	' Decimal precision: ',A/)
	1799	339 FORMAT (' No output during initial ',F8.2,' s')
	1800	340 FORMAT (/' Time series:')
	1801	341 FORMAT (' Output every ',F8.2,' s'/)
	1802	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1803	' Output every ',F8.2,' s ',A/ &
	1804	' Time averaged over ',F8.2,' s'/ &
	1805	' Averaging input every ',F8.2,' s'/ &
	1806	' Cross sections at ',A1,' = ',A/ &
	1807	' scalar-coordinates: ',A,' m'/)
	1808	343 FORMAT (/' Arrays: ',A/ &
	1809	' Output every ',F8.2,' s ',A/ &
	1810	' Time averaged over ',F8.2,' s'/ &
	1811	' Averaging input every ',F8.2,' s'/ &
	1812	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
[292]	1813	344 FORMAT (' Output format: ',A/)
[410]	1814	345 FORMAT (/' Scaling lengths for output locations of all subsequent mask IDs:',/ &
	1815	' mask_scale_x (in x-direction): ',F9.3, ' m',/ &
	1816	' mask_scale_y (in y-direction): ',F9.3, ' m',/ &
	1817	' mask_scale_z (in z-direction): ',F9.3, ' m' )
	1818	346 FORMAT (/' Masked data output',A,' for mask ID ',I2, ':')
	1819	347 FORMAT (' Variables: ',A/ &
	1820	' Output every ',F8.2,' s')
	1821	348 FORMAT (' Variables: ',A/ &
	1822	' Output every ',F8.2,' s'/ &
	1823	' Time averaged over ',F8.2,' s'/ &
	1824	' Averaging input every ',F8.2,' s')
	1825	349 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
	1826	'mask_scale_',A,' predefined by array mask_',I2.2,'_',A,':'/ &
	1827	13(' ',8(F8.2,',')/) )
	1828	350 FORMAT (/' Output locations in ',A,'-direction: ', &
	1829	'all gridpoints along ',A,'-direction (default).' )
	1830	351 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
	1831	'mask_scale_',A,' constructed from array mask_',I2.2,'_',A,'_loop:'/ &
	1832	' loop begin:',F8.2,', end:',F8.2,', stride:',F8.2 )
[1]	1833	#if defined( __dvrp_graphics )
	1834	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
	1835	' Output every ',F7.1,' s'/ &
	1836	' Output mode: ',A/ &
	1837	' Host / User: ',A,' / ',A/ &
	1838	' Directory: ',A// &
	1839	' The sequence contains:')
[337]	1840	361 FORMAT (/' Isosurface of "',A,'" Threshold value: ', E12.3/ &
	1841	' Isosurface color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
	1842	362 FORMAT (/' Slicer plane ',A/ &
[336]	1843	' Slicer limits: [',F6.2,',',F6.2,']')
[337]	1844	363 FORMAT (/' Particles'/ &
[336]	1845	' particle size: ',F7.2,' m')
	1846	364 FORMAT (' particle ',A,' controlled by "',A,'" with interval [', &
	1847	F6.2,',',F6.2,']')
[337]	1848	365 FORMAT (/' Groundplate color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)'/ &
[336]	1849	' Superelevation along (x,y,z): (',F4.1,',',F4.1,',',F4.1, &
	1850	')'/ &
	1851	' Clipping limits: from x = ',F9.1,' m to x = ',F9.1,' m'/ &
	1852	' from y = ',F9.1,' m to y = ',F9.1,' m')
[337]	1853	366 FORMAT (/' Topography color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
[336]	1854	367 FORMAT (' Polygon reduction for topography: cluster_size = ', I1)
[1]	1855	#endif
	1856	#if defined( __spectra )
	1857	370 FORMAT (' Spectra:')
	1858	371 FORMAT (' Output every ',F7.1,' s'/)
	1859	372 FORMAT (' Arrays: ', 10(A5,',')/ &
	1860	' Directions: ', 10(A5,',')/ &
[189]	1861	' height levels k = ', 20(I3,',')/ &
	1862	' ', 20(I3,',')/ &
	1863	' ', 20(I3,',')/ &
	1864	' ', 20(I3,',')/ &
	1865	' ', 19(I3,','),I3,'.'/ &
[1]	1866	' height levels selected for standard plot:'/ &
[189]	1867	' k = ', 20(I3,',')/ &
	1868	' ', 20(I3,',')/ &
	1869	' ', 20(I3,',')/ &
	1870	' ', 20(I3,',')/ &
	1871	' ', 19(I3,','),I3,'.'/ &
[1]	1872	' Time averaged over ', F7.1, ' s,' / &
	1873	' Profiles for the time averaging are taken every ', &
	1874	F6.1,' s')
	1875	#endif
	1876	400 FORMAT (//' Physical quantities:'/ &
	1877	' -------------------'/)
	1878	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
	1879	' Geograph. latitude : phi = ',F4.1,' degr'/ &
	1880	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
	1881	' f* = ',F9.6,' 1/s')
	1882	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
[97]	1883	412 FORMAT (/' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
	1884	413 FORMAT (/' Reference temperature in buoyancy terms: ',F8.4,' K')
[57]	1885	415 FORMAT (/' Cloud physics parameters:'/ &
[1]	1886	' ------------------------'/)
[57]	1887	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
[1]	1888	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
	1889	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
	1890	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
	1891	' Vapourization heat : L_v = ',E8.2,' J/kg')
	1892	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
	1893	' Height: ',A,' m'/ &
	1894	' Temperature: ',A,' K'/ &
	1895	' Gradient: ',A,' K/100m'/ &
	1896	' Gridpoint: ',A)
	1897	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
	1898	' Height: ',A,' m'/ &
	1899	' Humidity: ',A,' kg/kg'/ &
	1900	' Gradient: ',A,' (kg/kg)/100m'/ &
	1901	' Gridpoint: ',A)
	1902	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
	1903	' Height: ',A,' m'/ &
	1904	' Scalar concentration: ',A,' kg/m**3'/ &
	1905	' Gradient: ',A,' (kg/m**3)/100m'/ &
	1906	' Gridpoint: ',A)
	1907	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
	1908	' Height: ',A,' m'/ &
	1909	' ug: ',A,' m/s'/ &
	1910	' Gradient: ',A,' 1/100s'/ &
	1911	' Gridpoint: ',A)
	1912	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
	1913	' Height: ',A,' m'/ &
[97]	1914	' vg: ',A,' m/s'/ &
[1]	1915	' Gradient: ',A,' 1/100s'/ &
	1916	' Gridpoint: ',A)
[97]	1917	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
	1918	' Height: ',A,' m'/ &
	1919	' Salinity: ',A,' psu'/ &
	1920	' Gradient: ',A,' psu/100m'/ &
	1921	' Gridpoint: ',A)
[411]	1922	426 FORMAT (/' Characteristic levels of the subsidence/ascent profile:'// &
	1923	' Height: ',A,' m'/ &
	1924	' w_subs: ',A,' m/s'/ &
	1925	' Gradient: ',A,' (m/s)/100m'/ &
	1926	' Gridpoint: ',A)
[1]	1927	450 FORMAT (//' LES / Turbulence quantities:'/ &
	1928	' ---------------------------'/)
	1929	451 FORMAT (' Diffusion coefficients are constant:'/ &
	1930	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
	1931	452 FORMAT (' Mixing length is limited to the Prandtl mixing lenth.')
	1932	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
	1933	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
[108]	1934	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
[1]	1935	470 FORMAT (//' Actions during the simulation:'/ &
	1936	' -----------------------------'/)
[94]	1937	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
	1938	' Disturbance amplitude : ',F4.2, ' m/s'/ &
	1939	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
	1940	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
[1]	1941	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
	1942	' to i/j =',I4)
	1943	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
	1944	1X,F5.3, ' m2/s2')
	1945	474 FORMAT (' Random number generator used : ',A/)
	1946	475 FORMAT (' The surface temperature is increased (or decreased, ', &
	1947	'respectively, if'/ &
	1948	' the value is negative) by ',F5.2,' K at the beginning of the',&
	1949	' 3D-simulation'/)
	1950	476 FORMAT (' The surface humidity is increased (or decreased, ',&
	1951	'respectively, if the'/ &
	1952	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
	1953	' the 3D-simulation'/)
	1954	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
	1955	'respectively, if the'/ &
	1956	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
	1957	' the 3D-simulation'/)
	1958	480 FORMAT (' Particles:'/ &
	1959	' ---------'// &
	1960	' Particle advection is active (switched on at t = ', F7.1, &
	1961	' s)'/ &
	1962	' Start of new particle generations every ',F6.1,' s'/ &
	1963	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
	1964	' bottom: ', A, ' top: ', A/&
	1965	' Maximum particle age: ',F9.1,' s'/ &
[117]	1966	' Advection stopped at t = ',F9.1,' s'/ &
	1967	' Particles are sorted every ',F9.1,' s'/)
[1]	1968	481 FORMAT (' Particles have random start positions'/)
[336]	1969	482 FORMAT (' Particles are advected only horizontally'/)
[1]	1970	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
	1971	484 FORMAT (' Number of tails of the total domain: ',I10/ &
	1972	' Minimum distance between tailpoints: ',F8.2,' m'/ &
	1973	' Maximum age of the end of the tail: ',F8.2,' s')
	1974	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
	1975	486 FORMAT (' Particle statistics are written on file'/)
	1976	487 FORMAT (' Number of particle groups: ',I2/)
	1977	488 FORMAT (' SGS velocity components are used for particle advection'/ &
	1978	' minimum timestep for advection: ', F7.5/)
	1979	489 FORMAT (' Number of particles simultaneously released at each ', &
	1980	'point: ', I5/)
	1981	490 FORMAT (' Particle group ',I2,':'/ &
	1982	' Particle radius: ',E10.3, 'm')
	1983	491 FORMAT (' Particle inertia is activated'/ &
	1984	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
	1985	492 FORMAT (' Particles are advected only passively (no inertia)'/)
	1986	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
	1987	' y:',F8.1,' - ',F8.1,' m'/&
	1988	' z:',F8.1,' - ',F8.1,' m'/&
	1989	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
	1990	' m dz = ',F8.1,' m'/)
	1991	494 FORMAT (' Output of particle time series in NetCDF format every ', &
	1992	F8.2,' s'/)
	1993	495 FORMAT (' Number of particles in total domain: ',I10/)
	1994	500 FORMAT (//' 1D-Model parameters:'/ &
	1995	' -------------------'// &
	1996	' Simulation time: ',F8.1,' s'/ &
	1997	' Run-controll output every: ',F8.1,' s'/ &
	1998	' Vertical profile output every: ',F8.1,' s'/ &
	1999	' Mixing length calculation: ',A/ &
	2000	' Dissipation calculation: ',A/)
	2001	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
[667]	2002	503 FORMAT (' --> Momentum advection via Wicker-Skamarock-Scheme 5th order')
	2003	504 FORMAT (' --> Scalar advection via Wicker-Skamarock-Scheme 5th order')
[1]	2004
	2005
	2006	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |