Home

Context Navigation

header.f90 @ 1111

Last change on this file since 1111 was 1111, checked in by raasch, 11 years ago

New:
---

GPU porting of pres, swap_timelevel. Adjustments of openACC directives.
Further porting of poisfft, which now runs completely on GPU without any
host/device data transfer for serial an parallel runs (but parallel runs
require data transfer before and after the MPI transpositions).
GPU-porting of tridiagonal solver:
tridiagonal routines split into extermal subroutines (instead using CONTAINS),
no distinction between parallel/non-parallel in poisfft and tridia any more,
tridia routines moved to end of file because of probable bug in PGI compiler
(otherwise "invalid device function" is indicated during runtime).
(cuda_fft_interfaces, fft_xy, flow_statistics, init_3d_model, palm, poisfft, pres, prognostic_equations, swap_timelevel, time_integration, transpose)
output of accelerator board information. (header)

optimization of tridia routines: constant elements and coefficients of tri are
stored in seperate arrays ddzuw and tric, last dimension of tri reduced from 5 to 2,
(init_grid, init_3d_model, modules, palm, poisfft)

poisfft_init is now called internally from poisfft,
(Makefile, Makefile_check, init_pegrid, poisfft, poisfft_hybrid)

CPU-time per grid point and timestep is output to CPU_MEASURES file
(cpu_statistics, modules, time_integration)

Changed:

resorting from/to array work changed, work now has 4 dimensions instead of 1 (transpose)
array diss allocated only if required (init_3d_model)

pressure boundary condition "Neumann+inhomo" removed from the code
(check_parameters, header, poisfft, poisfft_hybrid, pres)

Errors:

bugfix: dependency added for cuda_fft_interfaces (Makefile)
bugfix: CUDA fft plans adjusted for domain decomposition (before they always
used total domain) (fft_xy)

Property svn:keywords set to Id

File size: 77.0 KB

Rev	Line
[1]	1	SUBROUTINE header
	2
[1036]	3	!--------------------------------------------------------------------------------!
	4	! This file is part of PALM.
	5	!
	6	! PALM is free software: you can redistribute it and/or modify it under the terms
	7	! of the GNU General Public License as published by the Free Software Foundation,
	8	! either version 3 of the License, or (at your option) any later version.
	9	!
	10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
	11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
	12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
	13	!
	14	! You should have received a copy of the GNU General Public License along with
	15	! PALM. If not, see <http://www.gnu.org/licenses/>.
	16	!
	17	! Copyright 1997-2012 Leibniz University Hannover
	18	!--------------------------------------------------------------------------------!
	19	!
[254]	20	! Current revisions:
[1]	21	! -----------------
[1111]	22	! output of accelerator board information
	23	! ibc_p_b = 2 removed
[941]	24	!
[392]	25	! Former revisions:
	26	! -----------------
	27	! $Id: header.f90 1111 2013-03-08 23:54:10Z raasch $
	28	!
[1109]	29	! 1108 2013-03-05 07:03:32Z raasch
	30	! bugfix for r1106
	31	!
[1107]	32	! 1106 2013-03-04 05:31:38Z raasch
	33	! some format changes for coupled runs
	34	!
[1093]	35	! 1092 2013-02-02 11:24:22Z raasch
	36	! unused variables removed
	37	!
[1037]	38	! 1036 2012-10-22 13:43:42Z raasch
	39	! code put under GPL (PALM 3.9)
	40	!
[1035]	41	! 1031 2012-10-19 14:35:30Z raasch
	42	! output of netCDF data format modified
	43	!
[1017]	44	! 1015 2012-09-27 09:23:24Z raasch
	45	! output of Aajustment of mixing length to the Prandtl mixing length at first
	46	! grid point above ground removed
	47	!
[1004]	48	! 1003 2012-09-14 14:35:53Z raasch
	49	! output of information about equal/unequal subdomain size removed
	50	!
[1002]	51	! 1001 2012-09-13 14:08:46Z raasch
	52	! all actions concerning leapfrog- and upstream-spline-scheme removed
	53	!
[979]	54	! 978 2012-08-09 08:28:32Z fricke
	55	! -km_damp_max, outflow_damping_width
	56	! +pt_damping_factor, pt_damping_width
	57	! +z0h
	58	!
[965]	59	! 964 2012-07-26 09:14:24Z raasch
	60	! output of profil-related quantities removed
	61	!
[941]	62	! 940 2012-07-09 14:31:00Z raasch
	63	! Output in case of simulations for pure neutral stratification (no pt-equation
	64	! solved)
	65	!
[928]	66	! 927 2012-06-06 19:15:04Z raasch
	67	! output of masking_method for mg-solver
	68	!
[869]	69	! 868 2012-03-28 12:21:07Z raasch
	70	! translation velocity in Galilean transformation changed to 0.6 * ug
	71	!
[834]	72	! 833 2012-02-22 08:55:55Z maronga
	73	! Adjusted format for leaf area density
	74	!
[829]	75	! 828 2012-02-21 12:00:36Z raasch
	76	! output of dissipation_classes + radius_classes
	77	!
[826]	78	! 825 2012-02-19 03:03:44Z raasch
	79	! Output of cloud physics parameters/quantities complemented and restructured
	80	!
[768]	81	! 767 2011-10-14 06:39:12Z raasch
	82	! Output of given initial u,v-profiles
	83	!
[760]	84	! 759 2011-09-15 13:58:31Z raasch
	85	! output of maximum number of parallel io streams
	86	!
[708]	87	! 707 2011-03-29 11:39:40Z raasch
	88	! bc_lr/ns replaced by bc_lr/ns_cyc
	89	!
[668]	90	! 667 2010-12-23 12:06:00Z suehring/gryschka
	91	! Output of advection scheme.
	92	! Modified output of Prandtl-layer height.
	93	!
[581]	94	! 580 2010-10-05 13:59:11Z heinze
	95	! Renaming of ws_vertical_gradient to subs_vertical_gradient,
	96	! ws_vertical_gradient_level to subs_vertical_gradient_level and
	97	! ws_vertical_gradient_level_ind to subs_vertical_gradient_level_i
	98	!
[494]	99	! 493 2010-03-01 08:30:24Z raasch
	100	! NetCDF data output format extendend for NetCDF4/HDF5
	101	!
[482]	102	! 449 2010-02-02 11:23:59Z raasch
	103	! +large scale vertical motion (subsidence/ascent)
	104	! Bugfix: index problem concerning gradient_level indices removed
	105	!
[449]	106	! 410 2009-12-04 17:05:40Z letzel
	107	! Masked data output: + dt_domask, mask_01~20_x\|y\|z, mask_01~20_x\|y\|z_loop,
[493]	108	! mask_scale\|_x\|y\|z, masks, skip_time_domask
[449]	109	!
[392]	110	! 346 2009-07-06 10:13:41Z raasch
[328]	111	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
[291]	112	! Coupling with independent precursor runs.
[254]	113	! Output of messages replaced by message handling routine.
[336]	114	! Output of several additional dvr parameters
[240]	115	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
[241]	116	! canyon_wall_south, conserve_volume_flow_mode, dp_external, dp_level_b,
	117	! dp_smooth, dpdxy, u_bulk, v_bulk
[256]	118	! topography_grid_convention moved from user_header
[292]	119	! small bugfix concerning 3d 64bit netcdf output format
[1]	120	!
[226]	121	! 206 2008-10-13 14:59:11Z raasch
	122	! Bugfix: error in zu index in case of section_xy = -1
	123	!
[200]	124	! 198 2008-09-17 08:55:28Z raasch
	125	! Format adjustments allowing output of larger revision numbers
	126	!
[198]	127	! 197 2008-09-16 15:29:03Z raasch
	128	! allow 100 spectra levels instead of 10 for consistency with
	129	! define_netcdf_header,
	130	! bugfix in the output of the characteristic levels of potential temperature,
	131	! geostrophic wind, scalar concentration, humidity and leaf area density,
	132	! output of turbulence recycling informations
	133	!
[139]	134	! 138 2007-11-28 10:03:58Z letzel
	135	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
	136	! Allow two instead of one digit to specify isosurface and slicer variables.
	137	! Output of sorting frequency of particles
	138	!
[110]	139	! 108 2007-08-24 15:10:38Z letzel
	140	! Output of informations for coupled model runs (boundary conditions etc.)
	141	! + output of momentumfluxes at the top boundary
	142	! Rayleigh damping for ocean, e_init
	143	!
[98]	144	! 97 2007-06-21 08:23:15Z raasch
	145	! Adjustments for the ocean version.
	146	! use_pt_reference renamed use_reference
	147	!
[90]	148	! 87 2007-05-22 15:46:47Z raasch
	149	! Bugfix: output of use_upstream_for_tke
	150	!
[83]	151	! 82 2007-04-16 15:40:52Z raasch
	152	! Preprocessor strings for different linux clusters changed to "lc",
	153	! routine local_flush is used for buffer flushing
	154	!
[77]	155	! 76 2007-03-29 00:58:32Z raasch
	156	! Output of netcdf_64bit_3d, particles-package is now part of the default code,
	157	! output of the loop optimization method, moisture renamed humidity,
	158	! output of subversion revision number
	159	!
[39]	160	! 19 2007-02-23 04:53:48Z raasch
	161	! Output of scalar flux applied at top boundary
	162	!
[3]	163	! RCS Log replace by Id keyword, revision history cleaned up
	164	!
[1]	165	! Revision 1.63 2006/08/22 13:53:13 raasch
	166	! Output of dz_max
	167	!
	168	! Revision 1.1 1997/08/11 06:17:20 raasch
	169	! Initial revision
	170	!
	171	!
	172	! Description:
	173	! ------------
	174	! Writing a header with all important informations about the actual run.
	175	! This subroutine is called three times, two times at the beginning
	176	! (writing information on files RUN_CONTROL and HEADER) and one time at the
	177	! end of the run, then writing additional information about CPU-usage on file
	178	! header.
[411]	179	!-----------------------------------------------------------------------------!
[1]	180
	181	USE arrays_3d
	182	USE control_parameters
	183	USE cloud_parameters
	184	USE cpulog
	185	USE dvrp_variables
	186	USE grid_variables
	187	USE indices
	188	USE model_1d
	189	USE particle_attributes
	190	USE pegrid
[411]	191	USE subsidence_mod
[1]	192	USE spectrum
	193
	194	IMPLICIT NONE
	195
	196	CHARACTER (LEN=1) :: prec
	197	CHARACTER (LEN=2) :: do2d_mode
	198	CHARACTER (LEN=5) :: section_chr
	199	CHARACTER (LEN=10) :: coor_chr, host_chr
	200	CHARACTER (LEN=16) :: begin_chr
[1106]	201	CHARACTER (LEN=26) :: ver_rev
[1]	202	CHARACTER (LEN=40) :: output_format
[167]	203	CHARACTER (LEN=70) :: char1, char2, dopr_chr, &
[1]	204	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
[410]	205	domask_chr, run_classification
[167]	206	CHARACTER (LEN=86) :: coordinates, gradients, learde, slices, &
	207	temperatures, ugcomponent, vgcomponent
[1]	208	CHARACTER (LEN=85) :: roben, runten
	209
[410]	210	CHARACTER (LEN=1), DIMENSION(1:3) :: dir = (/ 'x', 'y', 'z' /)
	211
	212	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, ch, count, cwx, cwy, &
[1092]	213	cxl, cxr, cyn, cys, dim, i, io, j, l, ll, mpi_type
[1]	214	REAL :: cpuseconds_per_simulated_second
	215
	216	!
	217	!-- Open the output file. At the end of the simulation, output is directed
	218	!-- to unit 19.
	219	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
	220	.NOT. simulated_time_at_begin /= simulated_time ) THEN
	221	io = 15 ! header output on file RUN_CONTROL
	222	ELSE
	223	io = 19 ! header output on file HEADER
	224	ENDIF
	225	CALL check_open( io )
	226
	227	!
	228	!-- At the end of the run, output file (HEADER) will be rewritten with
	229	!-- new informations
	230	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
	231
	232	!
	233	!-- Determine kind of model run
	234	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
	235	run_classification = '3D - restart run'
[328]	236	ELSEIF ( TRIM( initializing_actions ) == 'cyclic_fill' ) THEN
	237	run_classification = '3D - run with cyclic fill of 3D - prerun data'
[147]	238	ELSEIF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
	239	run_classification = '3D - run without 1D - prerun'
[197]	240	ELSEIF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[147]	241	run_classification = '3D - run with 1D - prerun'
[197]	242	ELSEIF ( INDEX( initializing_actions, 'by_user' ) /=0 ) THEN
	243	run_classification = '3D - run initialized by user'
[1]	244	ELSE
[254]	245	message_string = ' unknown action(s): ' // TRIM( initializing_actions )
	246	CALL message( 'header', 'PA0191', 0, 0, 0, 6, 0 )
[1]	247	ENDIF
[97]	248	IF ( ocean ) THEN
	249	run_classification = 'ocean - ' // run_classification
	250	ELSE
	251	run_classification = 'atmosphere - ' // run_classification
	252	ENDIF
[1]	253
	254	!
	255	!-- Run-identification, date, time, host
	256	host_chr = host(1:10)
[75]	257	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
[102]	258	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
[291]	259	IF ( TRIM( coupling_mode ) /= 'uncoupled' ) THEN
	260	#if defined( __mpi2 )
	261	mpi_type = 2
	262	#else
	263	mpi_type = 1
	264	#endif
	265	WRITE ( io, 101 ) mpi_type, coupling_mode
	266	ENDIF
[1108]	267	#if defined( __parallel )
[1106]	268	IF ( coupling_start_time /= 0.0 ) THEN
	269	IF ( coupling_start_time > simulated_time_at_begin ) THEN
	270	WRITE ( io, 109 )
	271	ELSE
	272	WRITE ( io, 114 )
	273	ENDIF
	274	ENDIF
[1108]	275	#endif
[102]	276	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
	277	ADJUSTR( host_chr )
[1]	278	#if defined( __parallel )
	279	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
	280	char1 = 'calculated'
	281	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	282	host(1:2) == 'lc' ) .AND. &
	283	npex == -1 .AND. pdims(2) == 1 ) THEN
	284	char1 = 'forced'
	285	ELSE
	286	char1 = 'predefined'
	287	ENDIF
	288	IF ( threads_per_task == 1 ) THEN
[102]	289	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
[1]	290	ELSE
[102]	291	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
[1]	292	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
	293	ENDIF
[1111]	294	IF ( num_acc_per_node /= 0 ) WRITE ( io, 117 ) num_acc_per_node
[1]	295	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	296	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
	297	npex == -1 .AND. pdims(2) == 1 ) &
	298	THEN
[102]	299	WRITE ( io, 106 )
[1]	300	ELSEIF ( pdims(2) == 1 ) THEN
[102]	301	WRITE ( io, 107 ) 'x'
[1]	302	ELSEIF ( pdims(1) == 1 ) THEN
[102]	303	WRITE ( io, 107 ) 'y'
[1]	304	ENDIF
[102]	305	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 105 )
[759]	306	IF ( numprocs /= maximum_parallel_io_streams ) THEN
	307	WRITE ( io, 108 ) maximum_parallel_io_streams
	308	ENDIF
[1111]	309	#else
	310	IF ( num_acc_per_node /= 0 ) WRITE ( io, 120 ) num_acc_per_node
[1]	311	#endif
	312	WRITE ( io, 99 )
	313
	314	!
	315	!-- Numerical schemes
	316	WRITE ( io, 110 )
	317	IF ( psolver(1:7) == 'poisfft' ) THEN
	318	WRITE ( io, 111 ) TRIM( fft_method )
	319	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
	320	ELSEIF ( psolver == 'sor' ) THEN
	321	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
	322	ELSEIF ( psolver == 'multigrid' ) THEN
	323	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
	324	IF ( mg_cycles == -1 ) THEN
	325	WRITE ( io, 140 ) residual_limit
	326	ELSE
	327	WRITE ( io, 141 ) mg_cycles
	328	ENDIF
	329	IF ( mg_switch_to_pe0_level == 0 ) THEN
	330	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	331	nzt_mg(1)
[197]	332	ELSEIF ( mg_switch_to_pe0_level /= -1 ) THEN
[1]	333	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
	334	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
	335	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
	336	nzt_mg(mg_switch_to_pe0_level), &
	337	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	338	nzt_mg(1)
	339	ENDIF
[927]	340	IF ( masking_method ) WRITE ( io, 144 )
[1]	341	ENDIF
	342	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
	343	THEN
	344	WRITE ( io, 142 )
	345	ENDIF
	346
	347	IF ( momentum_advec == 'pw-scheme' ) THEN
	348	WRITE ( io, 113 )
[667]	349	ELSEIF (momentum_advec == 'ws-scheme' ) THEN
	350	WRITE ( io, 503 )
[1]	351	ENDIF
	352	IF ( scalar_advec == 'pw-scheme' ) THEN
	353	WRITE ( io, 116 )
[667]	354	ELSEIF ( scalar_advec == 'ws-scheme' ) THEN
	355	WRITE ( io, 504 )
[1]	356	ELSE
	357	WRITE ( io, 118 )
	358	ENDIF
[63]	359
	360	WRITE ( io, 139 ) TRIM( loop_optimization )
	361
[1]	362	IF ( galilei_transformation ) THEN
	363	IF ( use_ug_for_galilei_tr ) THEN
[868]	364	char1 = '0.6 * geostrophic wind'
[1]	365	ELSE
	366	char1 = 'mean wind in model domain'
	367	ENDIF
	368	IF ( simulated_time_at_begin == simulated_time ) THEN
	369	char2 = 'at the start of the run'
	370	ELSE
	371	char2 = 'at the end of the run'
	372	ENDIF
	373	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
	374	advected_distance_x/1000.0, advected_distance_y/1000.0
	375	ENDIF
[1001]	376	WRITE ( io, 122 ) timestep_scheme
[87]	377	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
[1]	378	IF ( rayleigh_damping_factor /= 0.0 ) THEN
[108]	379	IF ( .NOT. ocean ) THEN
	380	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
	381	rayleigh_damping_factor
	382	ELSE
	383	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
	384	rayleigh_damping_factor
	385	ENDIF
[1]	386	ENDIF
[940]	387	IF ( neutral ) WRITE ( io, 131 ) pt_surface
[75]	388	IF ( humidity ) THEN
[1]	389	IF ( .NOT. cloud_physics ) THEN
	390	WRITE ( io, 129 )
	391	ELSE
	392	WRITE ( io, 130 )
	393	ENDIF
	394	ENDIF
	395	IF ( passive_scalar ) WRITE ( io, 134 )
[240]	396	IF ( conserve_volume_flow ) THEN
[241]	397	WRITE ( io, 150 ) conserve_volume_flow_mode
	398	IF ( TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
	399	WRITE ( io, 151 ) u_bulk, v_bulk
	400	ENDIF
[240]	401	ELSEIF ( dp_external ) THEN
	402	IF ( dp_smooth ) THEN
[241]	403	WRITE ( io, 152 ) dpdxy, dp_level_b, ', vertically smoothed.'
[240]	404	ELSE
[241]	405	WRITE ( io, 152 ) dpdxy, dp_level_b, '.'
[240]	406	ENDIF
	407	ENDIF
[411]	408	IF ( large_scale_subsidence ) THEN
	409	WRITE ( io, 153 )
	410	WRITE ( io, 154 )
	411	ENDIF
[1]	412	WRITE ( io, 99 )
	413
	414	!
	415	!-- Runtime and timestep informations
	416	WRITE ( io, 200 )
	417	IF ( .NOT. dt_fixed ) THEN
	418	WRITE ( io, 201 ) dt_max, cfl_factor
	419	ELSE
	420	WRITE ( io, 202 ) dt
	421	ENDIF
	422	WRITE ( io, 203 ) simulated_time_at_begin, end_time
	423
	424	IF ( time_restart /= 9999999.9 .AND. &
	425	simulated_time_at_begin == simulated_time ) THEN
	426	IF ( dt_restart == 9999999.9 ) THEN
	427	WRITE ( io, 204 ) ' Restart at: ',time_restart
	428	ELSE
	429	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
	430	ENDIF
	431	ENDIF
	432
	433	IF ( simulated_time_at_begin /= simulated_time ) THEN
	434	i = MAX ( log_point_s(10)%counts, 1 )
	435	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
	436	cpuseconds_per_simulated_second = 0.0
	437	ELSE
	438	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
	439	( simulated_time - &
	440	simulated_time_at_begin )
	441	ENDIF
	442	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
	443	log_point_s(10)%sum / REAL( i ), &
	444	cpuseconds_per_simulated_second
	445	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
	446	IF ( dt_restart == 9999999.9 ) THEN
[1106]	447	WRITE ( io, 204 ) ' Next restart at: ',time_restart
[1]	448	ELSE
[1106]	449	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
[1]	450	ENDIF
	451	ENDIF
	452	ENDIF
	453
	454	!
[291]	455	!-- Start time for coupled runs, if independent precursor runs for atmosphere
[1106]	456	!-- and ocean are used or have been used. In this case, coupling_start_time
	457	!-- defines the time when the coupling is switched on.
[291]	458	IF ( coupling_start_time /= 0.0 ) THEN
[1106]	459	WRITE ( io, 207 ) coupling_start_time
[291]	460	ENDIF
	461
	462	!
[1]	463	!-- Computational grid
[94]	464	IF ( .NOT. ocean ) THEN
	465	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
	466	IF ( dz_stretch_level_index < nzt+1 ) THEN
	467	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	468	dz_stretch_factor, dz_max
	469	ENDIF
	470	ELSE
	471	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(0)
	472	IF ( dz_stretch_level_index > 0 ) THEN
	473	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	474	dz_stretch_factor, dz_max
	475	ENDIF
[1]	476	ENDIF
	477	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
	478	MIN( nnz+2, nzt+2 )
	479	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
	480
	481	!
	482	!-- Topography
	483	WRITE ( io, 270 ) topography
	484	SELECT CASE ( TRIM( topography ) )
	485
	486	CASE ( 'flat' )
	487	! no actions necessary
	488
	489	CASE ( 'single_building' )
	490	blx = INT( building_length_x / dx )
	491	bly = INT( building_length_y / dy )
	492	bh = INT( building_height / dz )
	493
	494	IF ( building_wall_left == 9999999.9 ) THEN
	495	building_wall_left = ( nx + 1 - blx ) / 2 * dx
	496	ENDIF
	497	bxl = INT ( building_wall_left / dx + 0.5 )
	498	bxr = bxl + blx
	499
	500	IF ( building_wall_south == 9999999.9 ) THEN
	501	building_wall_south = ( ny + 1 - bly ) / 2 * dy
	502	ENDIF
	503	bys = INT ( building_wall_south / dy + 0.5 )
	504	byn = bys + bly
	505
	506	WRITE ( io, 271 ) building_length_x, building_length_y, &
	507	building_height, bxl, bxr, bys, byn
	508
[240]	509	CASE ( 'single_street_canyon' )
	510	ch = NINT( canyon_height / dz )
	511	IF ( canyon_width_x /= 9999999.9 ) THEN
	512	!
	513	!-- Street canyon in y direction
	514	cwx = NINT( canyon_width_x / dx )
	515	IF ( canyon_wall_left == 9999999.9 ) THEN
	516	canyon_wall_left = ( nx + 1 - cwx ) / 2 * dx
	517	ENDIF
	518	cxl = NINT( canyon_wall_left / dx )
	519	cxr = cxl + cwx
	520	WRITE ( io, 272 ) 'y', canyon_height, ch, 'u', cxl, cxr
	521
	522	ELSEIF ( canyon_width_y /= 9999999.9 ) THEN
	523	!
	524	!-- Street canyon in x direction
	525	cwy = NINT( canyon_width_y / dy )
	526	IF ( canyon_wall_south == 9999999.9 ) THEN
	527	canyon_wall_south = ( ny + 1 - cwy ) / 2 * dy
	528	ENDIF
	529	cys = NINT( canyon_wall_south / dy )
	530	cyn = cys + cwy
	531	WRITE ( io, 272 ) 'x', canyon_height, ch, 'v', cys, cyn
	532	ENDIF
	533
[1]	534	END SELECT
	535
[256]	536	IF ( TRIM( topography ) /= 'flat' ) THEN
	537	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
	538	IF ( TRIM( topography ) == 'single_building' .OR. &
	539	TRIM( topography ) == 'single_street_canyon' ) THEN
	540	WRITE ( io, 278 )
	541	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
	542	WRITE ( io, 279 )
	543	ENDIF
	544	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_edge' ) THEN
	545	WRITE ( io, 278 )
	546	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_center' ) THEN
	547	WRITE ( io, 279 )
	548	ENDIF
	549	ENDIF
	550
[138]	551	IF ( plant_canopy ) THEN
	552
	553	WRITE ( io, 280 ) canopy_mode, pch_index, drag_coefficient
[153]	554	IF ( passive_scalar ) THEN
	555	WRITE ( io, 281 ) scalar_exchange_coefficient, &
	556	leaf_surface_concentration
	557	ENDIF
[138]	558
[1]	559	!
[153]	560	!-- Heat flux at the top of vegetation
	561	WRITE ( io, 282 ) cthf
	562
	563	!
[138]	564	!-- Leaf area density profile
	565	!-- Building output strings, starting with surface value
[833]	566	WRITE ( learde, '(F6.4)' ) lad_surface
[138]	567	gradients = '------'
	568	slices = ' 0'
	569	coordinates = ' 0.0'
	570	i = 1
	571	DO WHILE ( lad_vertical_gradient_level_ind(i) /= -9999 )
	572
	573	WRITE (coor_chr,'(F7.2)') lad(lad_vertical_gradient_level_ind(i))
	574	learde = TRIM( learde ) // ' ' // TRIM( coor_chr )
	575
	576	WRITE (coor_chr,'(F7.2)') lad_vertical_gradient(i)
	577	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	578
	579	WRITE (coor_chr,'(I7)') lad_vertical_gradient_level_ind(i)
	580	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	581
	582	WRITE (coor_chr,'(F7.1)') lad_vertical_gradient_level(i)
	583	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	584
	585	i = i + 1
	586	ENDDO
	587
[153]	588	WRITE ( io, 283 ) TRIM( coordinates ), TRIM( learde ), &
[138]	589	TRIM( gradients ), TRIM( slices )
	590
	591	ENDIF
	592
	593	!
[1]	594	!-- Boundary conditions
	595	IF ( ibc_p_b == 0 ) THEN
	596	runten = 'p(0) = 0 \|'
	597	ELSEIF ( ibc_p_b == 1 ) THEN
	598	runten = 'p(0) = p(1) \|'
	599	ENDIF
	600	IF ( ibc_p_t == 0 ) THEN
	601	roben = 'p(nzt+1) = 0 \|'
	602	ELSE
	603	roben = 'p(nzt+1) = p(nzt) \|'
	604	ENDIF
	605
	606	IF ( ibc_uv_b == 0 ) THEN
	607	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
	608	ELSE
	609	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
	610	ENDIF
[132]	611	IF ( TRIM( bc_uv_t ) == 'dirichlet_0' ) THEN
	612	roben = TRIM( roben ) // ' uv(nzt+1) = 0 \|'
	613	ELSEIF ( ibc_uv_t == 0 ) THEN
[1]	614	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
	615	ELSE
	616	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
	617	ENDIF
	618
	619	IF ( ibc_pt_b == 0 ) THEN
	620	runten = TRIM( runten ) // ' pt(0) = pt_surface'
[102]	621	ELSEIF ( ibc_pt_b == 1 ) THEN
[1]	622	runten = TRIM( runten ) // ' pt(0) = pt(1)'
[102]	623	ELSEIF ( ibc_pt_b == 2 ) THEN
	624	runten = TRIM( runten ) // ' pt(0) = from coupled model'
[1]	625	ENDIF
	626	IF ( ibc_pt_t == 0 ) THEN
[19]	627	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
	628	ELSEIF( ibc_pt_t == 1 ) THEN
	629	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
	630	ELSEIF( ibc_pt_t == 2 ) THEN
	631	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
[667]	632
[1]	633	ENDIF
	634
	635	WRITE ( io, 300 ) runten, roben
	636
	637	IF ( .NOT. constant_diffusion ) THEN
	638	IF ( ibc_e_b == 1 ) THEN
	639	runten = 'e(0) = e(1)'
	640	ELSE
	641	runten = 'e(0) = e(1) = (u/0.1)*2'
	642	ENDIF
	643	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
	644
[97]	645	WRITE ( io, 301 ) 'e', runten, roben
[1]	646
	647	ENDIF
	648
[97]	649	IF ( ocean ) THEN
	650	runten = 'sa(0) = sa(1)'
	651	IF ( ibc_sa_t == 0 ) THEN
	652	roben = 'sa(nzt+1) = sa_surface'
[1]	653	ELSE
[97]	654	roben = 'sa(nzt+1) = sa(nzt)'
[1]	655	ENDIF
[97]	656	WRITE ( io, 301 ) 'sa', runten, roben
	657	ENDIF
[1]	658
[97]	659	IF ( humidity ) THEN
	660	IF ( ibc_q_b == 0 ) THEN
	661	runten = 'q(0) = q_surface'
	662	ELSE
	663	runten = 'q(0) = q(1)'
	664	ENDIF
	665	IF ( ibc_q_t == 0 ) THEN
	666	roben = 'q(nzt) = q_top'
	667	ELSE
	668	roben = 'q(nzt) = q(nzt-1) + dq/dz'
	669	ENDIF
	670	WRITE ( io, 301 ) 'q', runten, roben
	671	ENDIF
[1]	672
[97]	673	IF ( passive_scalar ) THEN
	674	IF ( ibc_q_b == 0 ) THEN
	675	runten = 's(0) = s_surface'
	676	ELSE
	677	runten = 's(0) = s(1)'
	678	ENDIF
	679	IF ( ibc_q_t == 0 ) THEN
	680	roben = 's(nzt) = s_top'
	681	ELSE
	682	roben = 's(nzt) = s(nzt-1) + ds/dz'
	683	ENDIF
	684	WRITE ( io, 301 ) 's', runten, roben
[1]	685	ENDIF
	686
	687	IF ( use_surface_fluxes ) THEN
	688	WRITE ( io, 303 )
	689	IF ( constant_heatflux ) THEN
	690	WRITE ( io, 306 ) surface_heatflux
	691	IF ( random_heatflux ) WRITE ( io, 307 )
	692	ENDIF
[75]	693	IF ( humidity .AND. constant_waterflux ) THEN
[1]	694	WRITE ( io, 311 ) surface_waterflux
	695	ENDIF
	696	IF ( passive_scalar .AND. constant_waterflux ) THEN
	697	WRITE ( io, 313 ) surface_waterflux
	698	ENDIF
	699	ENDIF
	700
[19]	701	IF ( use_top_fluxes ) THEN
	702	WRITE ( io, 304 )
[102]	703	IF ( coupling_mode == 'uncoupled' ) THEN
[151]	704	WRITE ( io, 320 ) top_momentumflux_u, top_momentumflux_v
[102]	705	IF ( constant_top_heatflux ) THEN
	706	WRITE ( io, 306 ) top_heatflux
	707	ENDIF
	708	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	709	WRITE ( io, 316 )
[19]	710	ENDIF
[97]	711	IF ( ocean .AND. constant_top_salinityflux ) THEN
	712	WRITE ( io, 309 ) top_salinityflux
	713	ENDIF
[75]	714	IF ( humidity .OR. passive_scalar ) THEN
[19]	715	WRITE ( io, 315 )
	716	ENDIF
	717	ENDIF
	718
[1]	719	IF ( prandtl_layer ) THEN
[978]	720	WRITE ( io, 305 ) (zu(1)-zu(0)), roughness_length, &
	721	z0h_factor*roughness_length, kappa, &
[94]	722	rif_min, rif_max
[1]	723	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
[75]	724	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
[1]	725	WRITE ( io, 312 )
	726	ENDIF
	727	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
	728	WRITE ( io, 314 )
	729	ENDIF
	730	ELSE
	731	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
	732	WRITE ( io, 310 ) rif_min, rif_max
	733	ENDIF
	734	ENDIF
	735
	736	WRITE ( io, 317 ) bc_lr, bc_ns
[707]	737	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
[978]	738	WRITE ( io, 318 ) pt_damping_width, pt_damping_factor
[151]	739	IF ( turbulent_inflow ) THEN
	740	WRITE ( io, 319 ) recycling_width, recycling_plane, &
	741	inflow_damping_height, inflow_damping_width
	742	ENDIF
[1]	743	ENDIF
	744
	745	!
	746	!-- Listing of 1D-profiles
[151]	747	WRITE ( io, 325 ) dt_dopr_listing
[1]	748	IF ( averaging_interval_pr /= 0.0 ) THEN
[151]	749	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
[1]	750	ENDIF
	751
	752	!
	753	!-- DATA output
	754	WRITE ( io, 330 )
	755	IF ( averaging_interval_pr /= 0.0 ) THEN
[151]	756	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
[1]	757	ENDIF
	758
	759	!
	760	!-- 1D-profiles
[346]	761	dopr_chr = 'Profile:'
[1]	762	IF ( dopr_n /= 0 ) THEN
	763	WRITE ( io, 331 )
	764
	765	output_format = ''
	766	IF ( netcdf_output ) THEN
[1031]	767	output_format = output_format_netcdf
[1]	768	ENDIF
[292]	769	WRITE ( io, 344 ) output_format
[1]	770
	771	DO i = 1, dopr_n
	772	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
	773	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
	774	WRITE ( io, 332 ) dopr_chr
	775	dopr_chr = ' :'
	776	ENDIF
	777	ENDDO
	778
	779	IF ( dopr_chr /= '' ) THEN
	780	WRITE ( io, 332 ) dopr_chr
	781	ENDIF
	782	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
	783	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
	784	ENDIF
	785
	786	!
	787	!-- 2D-arrays
	788	DO av = 0, 1
	789
	790	i = 1
	791	do2d_xy = ''
	792	do2d_xz = ''
	793	do2d_yz = ''
	794	DO WHILE ( do2d(av,i) /= ' ' )
	795
	796	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
	797	do2d_mode = do2d(av,i)(l-1:l)
	798
	799	SELECT CASE ( do2d_mode )
	800	CASE ( 'xy' )
	801	ll = LEN_TRIM( do2d_xy )
	802	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	803	CASE ( 'xz' )
	804	ll = LEN_TRIM( do2d_xz )
	805	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	806	CASE ( 'yz' )
	807	ll = LEN_TRIM( do2d_yz )
	808	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	809	END SELECT
	810
	811	i = i + 1
	812
	813	ENDDO
	814
	815	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
	816	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
	817	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
	818	( netcdf_output .OR. iso2d_output ) ) THEN
	819
	820	IF ( av == 0 ) THEN
	821	WRITE ( io, 334 ) ''
	822	ELSE
	823	WRITE ( io, 334 ) '(time-averaged)'
	824	ENDIF
	825
	826	IF ( do2d_at_begin ) THEN
	827	begin_chr = 'and at the start'
	828	ELSE
	829	begin_chr = ''
	830	ENDIF
	831
	832	output_format = ''
	833	IF ( netcdf_output ) THEN
[1031]	834	output_format = output_format_netcdf
[1]	835	ENDIF
	836	IF ( iso2d_output ) THEN
	837	IF ( netcdf_output ) THEN
[1031]	838	output_format = TRIM( output_format_netcdf ) // ' and iso2d'
[1]	839	ELSE
	840	output_format = 'iso2d'
	841	ENDIF
	842	ENDIF
[292]	843	WRITE ( io, 344 ) output_format
[1]	844
	845	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
	846	i = 1
	847	slices = '/'
	848	coordinates = '/'
	849	!
	850	!-- Building strings with index and coordinate informations of the
	851	!-- slices
	852	DO WHILE ( section(i,1) /= -9999 )
	853
	854	WRITE (section_chr,'(I5)') section(i,1)
	855	section_chr = ADJUSTL( section_chr )
	856	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	857
[206]	858	IF ( section(i,1) == -1 ) THEN
	859	WRITE (coor_chr,'(F10.1)') -1.0
	860	ELSE
	861	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
	862	ENDIF
[1]	863	coor_chr = ADJUSTL( coor_chr )
	864	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	865
	866	i = i + 1
	867	ENDDO
	868	IF ( av == 0 ) THEN
	869	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
	870	TRIM( begin_chr ), 'k', TRIM( slices ), &
	871	TRIM( coordinates )
	872	IF ( skip_time_do2d_xy /= 0.0 ) THEN
	873	WRITE ( io, 339 ) skip_time_do2d_xy
	874	ENDIF
	875	ELSE
	876	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
	877	TRIM( begin_chr ), averaging_interval, &
	878	dt_averaging_input, 'k', TRIM( slices ), &
	879	TRIM( coordinates )
	880	IF ( skip_time_data_output_av /= 0.0 ) THEN
	881	WRITE ( io, 339 ) skip_time_data_output_av
	882	ENDIF
	883	ENDIF
	884
	885	ENDIF
	886
	887	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
	888	i = 1
	889	slices = '/'
	890	coordinates = '/'
	891	!
	892	!-- Building strings with index and coordinate informations of the
	893	!-- slices
	894	DO WHILE ( section(i,2) /= -9999 )
	895
	896	WRITE (section_chr,'(I5)') section(i,2)
	897	section_chr = ADJUSTL( section_chr )
	898	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	899
	900	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
	901	coor_chr = ADJUSTL( coor_chr )
	902	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	903
	904	i = i + 1
	905	ENDDO
	906	IF ( av == 0 ) THEN
	907	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
	908	TRIM( begin_chr ), 'j', TRIM( slices ), &
	909	TRIM( coordinates )
	910	IF ( skip_time_do2d_xz /= 0.0 ) THEN
	911	WRITE ( io, 339 ) skip_time_do2d_xz
	912	ENDIF
	913	ELSE
	914	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
	915	TRIM( begin_chr ), averaging_interval, &
	916	dt_averaging_input, 'j', TRIM( slices ), &
	917	TRIM( coordinates )
	918	IF ( skip_time_data_output_av /= 0.0 ) THEN
	919	WRITE ( io, 339 ) skip_time_data_output_av
	920	ENDIF
	921	ENDIF
	922	ENDIF
	923
	924	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
	925	i = 1
	926	slices = '/'
	927	coordinates = '/'
	928	!
	929	!-- Building strings with index and coordinate informations of the
	930	!-- slices
	931	DO WHILE ( section(i,3) /= -9999 )
	932
	933	WRITE (section_chr,'(I5)') section(i,3)
	934	section_chr = ADJUSTL( section_chr )
	935	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	936
	937	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
	938	coor_chr = ADJUSTL( coor_chr )
	939	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	940
	941	i = i + 1
	942	ENDDO
	943	IF ( av == 0 ) THEN
	944	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
	945	TRIM( begin_chr ), 'i', TRIM( slices ), &
	946	TRIM( coordinates )
	947	IF ( skip_time_do2d_yz /= 0.0 ) THEN
	948	WRITE ( io, 339 ) skip_time_do2d_yz
	949	ENDIF
	950	ELSE
	951	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
	952	TRIM( begin_chr ), averaging_interval, &
	953	dt_averaging_input, 'i', TRIM( slices ), &
	954	TRIM( coordinates )
	955	IF ( skip_time_data_output_av /= 0.0 ) THEN
	956	WRITE ( io, 339 ) skip_time_data_output_av
	957	ENDIF
	958	ENDIF
	959	ENDIF
	960
	961	ENDIF
	962
	963	ENDDO
	964
	965	!
	966	!-- 3d-arrays
	967	DO av = 0, 1
	968
	969	i = 1
	970	do3d_chr = ''
	971	DO WHILE ( do3d(av,i) /= ' ' )
	972
	973	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
	974	i = i + 1
	975
	976	ENDDO
	977
	978	IF ( do3d_chr /= '' ) THEN
	979	IF ( av == 0 ) THEN
	980	WRITE ( io, 336 ) ''
	981	ELSE
	982	WRITE ( io, 336 ) '(time-averaged)'
	983	ENDIF
	984
	985	output_format = ''
	986	IF ( netcdf_output ) THEN
[1031]	987	output_format = output_format_netcdf
[1]	988	ENDIF
	989	IF ( avs_output ) THEN
	990	IF ( netcdf_output ) THEN
[1031]	991	output_format = TRIM( output_format_netcdf ) // ' and avs'
[1]	992	ELSE
	993	output_format = 'avs'
	994	ENDIF
	995	ENDIF
[292]	996	WRITE ( io, 344 ) output_format
[1]	997
	998	IF ( do3d_at_begin ) THEN
	999	begin_chr = 'and at the start'
	1000	ELSE
	1001	begin_chr = ''
	1002	ENDIF
	1003	IF ( av == 0 ) THEN
	1004	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
	1005	zu(nz_do3d), nz_do3d
	1006	ELSE
	1007	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
	1008	TRIM( begin_chr ), averaging_interval, &
	1009	dt_averaging_input, zu(nz_do3d), nz_do3d
	1010	ENDIF
	1011
	1012	IF ( do3d_compress ) THEN
	1013	do3d_chr = ''
	1014	i = 1
	1015	DO WHILE ( do3d(av,i) /= ' ' )
	1016
	1017	SELECT CASE ( do3d(av,i) )
	1018	CASE ( 'u' )
	1019	j = 1
	1020	CASE ( 'v' )
	1021	j = 2
	1022	CASE ( 'w' )
	1023	j = 3
	1024	CASE ( 'p' )
	1025	j = 4
	1026	CASE ( 'pt' )
	1027	j = 5
	1028	END SELECT
	1029	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
	1030	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
	1031	':' // prec // ','
	1032	i = i + 1
	1033
	1034	ENDDO
	1035	WRITE ( io, 338 ) do3d_chr
	1036
	1037	ENDIF
	1038
	1039	IF ( av == 0 ) THEN
	1040	IF ( skip_time_do3d /= 0.0 ) THEN
	1041	WRITE ( io, 339 ) skip_time_do3d
	1042	ENDIF
	1043	ELSE
	1044	IF ( skip_time_data_output_av /= 0.0 ) THEN
	1045	WRITE ( io, 339 ) skip_time_data_output_av
	1046	ENDIF
	1047	ENDIF
	1048
	1049	ENDIF
	1050
	1051	ENDDO
	1052
	1053	!
[410]	1054	!-- masked arrays
	1055	IF ( masks > 0 ) WRITE ( io, 345 ) &
	1056	mask_scale_x, mask_scale_y, mask_scale_z
	1057	DO mid = 1, masks
	1058	DO av = 0, 1
	1059
	1060	i = 1
	1061	domask_chr = ''
	1062	DO WHILE ( domask(mid,av,i) /= ' ' )
	1063	domask_chr = TRIM( domask_chr ) // ' ' // &
	1064	TRIM( domask(mid,av,i) ) // ','
	1065	i = i + 1
	1066	ENDDO
	1067
	1068	IF ( domask_chr /= '' ) THEN
	1069	IF ( av == 0 ) THEN
	1070	WRITE ( io, 346 ) '', mid
	1071	ELSE
	1072	WRITE ( io, 346 ) ' (time-averaged)', mid
	1073	ENDIF
	1074
[1031]	1075	output_format = ' '
[410]	1076	IF ( netcdf_output ) THEN
[1031]	1077	output_format = output_format_netcdf
[410]	1078	ENDIF
	1079	WRITE ( io, 344 ) output_format
	1080
	1081	IF ( av == 0 ) THEN
	1082	WRITE ( io, 347 ) domask_chr, dt_domask(mid)
	1083	ELSE
	1084	WRITE ( io, 348 ) domask_chr, dt_data_output_av, &
	1085	averaging_interval, dt_averaging_input
	1086	ENDIF
	1087
	1088	IF ( av == 0 ) THEN
	1089	IF ( skip_time_domask(mid) /= 0.0 ) THEN
	1090	WRITE ( io, 339 ) skip_time_domask(mid)
	1091	ENDIF
	1092	ELSE
	1093	IF ( skip_time_data_output_av /= 0.0 ) THEN
	1094	WRITE ( io, 339 ) skip_time_data_output_av
	1095	ENDIF
	1096	ENDIF
	1097	!
	1098	!-- output locations
	1099	DO dim = 1, 3
	1100	IF ( mask(mid,dim,1) >= 0.0 ) THEN
	1101	count = 0
	1102	DO WHILE ( mask(mid,dim,count+1) >= 0.0 )
	1103	count = count + 1
	1104	ENDDO
	1105	WRITE ( io, 349 ) dir(dim), dir(dim), mid, dir(dim), &
	1106	mask(mid,dim,:count)
	1107	ELSEIF ( mask_loop(mid,dim,1) < 0.0 .AND. &
	1108	mask_loop(mid,dim,2) < 0.0 .AND. &
	1109	mask_loop(mid,dim,3) == 0.0 ) THEN
	1110	WRITE ( io, 350 ) dir(dim), dir(dim)
	1111	ELSEIF ( mask_loop(mid,dim,3) == 0.0 ) THEN
	1112	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
	1113	mask_loop(mid,dim,1:2)
	1114	ELSE
	1115	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
	1116	mask_loop(mid,dim,1:3)
	1117	ENDIF
	1118	ENDDO
	1119	ENDIF
	1120
	1121	ENDDO
	1122	ENDDO
	1123
	1124	!
[1]	1125	!-- Timeseries
	1126	IF ( dt_dots /= 9999999.9 ) THEN
	1127	WRITE ( io, 340 )
	1128
	1129	output_format = ''
	1130	IF ( netcdf_output ) THEN
[1031]	1131	output_format = output_format_netcdf
[1]	1132	ENDIF
[292]	1133	WRITE ( io, 344 ) output_format
[1]	1134	WRITE ( io, 341 ) dt_dots
	1135	ENDIF
	1136
	1137	#if defined( __dvrp_graphics )
	1138	!
	1139	!-- Dvrp-output
	1140	IF ( dt_dvrp /= 9999999.9 ) THEN
	1141	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
	1142	TRIM( dvrp_username ), TRIM( dvrp_directory )
	1143	i = 1
	1144	l = 0
[336]	1145	m = 0
[1]	1146	DO WHILE ( mode_dvrp(i) /= ' ' )
	1147	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
[130]	1148	READ ( mode_dvrp(i), '(10X,I2)' ) j
[1]	1149	l = l + 1
	1150	IF ( do3d(0,j) /= ' ' ) THEN
[336]	1151	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l), &
	1152	isosurface_color(:,l)
[1]	1153	ENDIF
	1154	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
[130]	1155	READ ( mode_dvrp(i), '(6X,I2)' ) j
[336]	1156	m = m + 1
	1157	IF ( do2d(0,j) /= ' ' ) THEN
	1158	WRITE ( io, 362 ) TRIM( do2d(0,j) ), &
	1159	slicer_range_limits_dvrp(:,m)
	1160	ENDIF
[1]	1161	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
[336]	1162	WRITE ( io, 363 ) dvrp_psize
	1163	IF ( particle_dvrpsize /= 'none' ) THEN
	1164	WRITE ( io, 364 ) 'size', TRIM( particle_dvrpsize ), &
	1165	dvrpsize_interval
	1166	ENDIF
	1167	IF ( particle_color /= 'none' ) THEN
	1168	WRITE ( io, 364 ) 'color', TRIM( particle_color ), &
	1169	color_interval
	1170	ENDIF
[1]	1171	ENDIF
	1172	i = i + 1
	1173	ENDDO
[237]	1174
[336]	1175	WRITE ( io, 365 ) groundplate_color, superelevation_x, &
	1176	superelevation_y, superelevation, clip_dvrp_l, &
	1177	clip_dvrp_r, clip_dvrp_s, clip_dvrp_n
	1178
	1179	IF ( TRIM( topography ) /= 'flat' ) THEN
	1180	WRITE ( io, 366 ) topography_color
	1181	IF ( cluster_size > 1 ) THEN
	1182	WRITE ( io, 367 ) cluster_size
	1183	ENDIF
[237]	1184	ENDIF
	1185
[1]	1186	ENDIF
	1187	#endif
	1188
	1189	#if defined( __spectra )
	1190	!
	1191	!-- Spectra output
	1192	IF ( dt_dosp /= 9999999.9 ) THEN
	1193	WRITE ( io, 370 )
	1194
[1031]	1195	output_format = ' '
[1]	1196	IF ( netcdf_output ) THEN
[1031]	1197	output_format = output_format_netcdf
[1]	1198	ENDIF
[292]	1199	WRITE ( io, 344 ) output_format
[1]	1200	WRITE ( io, 371 ) dt_dosp
	1201	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
	1202	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
	1203	( spectra_direction(i), i = 1,10 ), &
[189]	1204	( comp_spectra_level(i), i = 1,100 ), &
	1205	( plot_spectra_level(i), i = 1,100 ), &
[1]	1206	averaging_interval_sp, dt_averaging_input_pr
	1207	ENDIF
	1208	#endif
	1209
	1210	WRITE ( io, 99 )
	1211
	1212	!
	1213	!-- Physical quantities
	1214	WRITE ( io, 400 )
	1215
	1216	!
	1217	!-- Geostrophic parameters
	1218	WRITE ( io, 410 ) omega, phi, f, fs
	1219
	1220	!
	1221	!-- Other quantities
	1222	WRITE ( io, 411 ) g
[97]	1223	IF ( use_reference ) THEN
	1224	IF ( ocean ) THEN
	1225	WRITE ( io, 412 ) prho_reference
	1226	ELSE
	1227	WRITE ( io, 413 ) pt_reference
	1228	ENDIF
	1229	ENDIF
[1]	1230
	1231	!
	1232	!-- Cloud physics parameters
	1233	IF ( cloud_physics ) THEN
[57]	1234	WRITE ( io, 415 )
	1235	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
[1]	1236	ENDIF
	1237
	1238	!-- Profile of the geostrophic wind (component ug)
	1239	!-- Building output strings
	1240	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
	1241	gradients = '------'
	1242	slices = ' 0'
	1243	coordinates = ' 0.0'
	1244	i = 1
	1245	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
	1246
[167]	1247	WRITE (coor_chr,'(F6.2,1X)') ug(ug_vertical_gradient_level_ind(i))
[1]	1248	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
	1249
[167]	1250	WRITE (coor_chr,'(F6.2,1X)') ug_vertical_gradient(i)
[1]	1251	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1252
[167]	1253	WRITE (coor_chr,'(I6,1X)') ug_vertical_gradient_level_ind(i)
[1]	1254	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1255
[167]	1256	WRITE (coor_chr,'(F6.1,1X)') ug_vertical_gradient_level(i)
[1]	1257	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1258
[430]	1259	IF ( i == 10 ) THEN
	1260	EXIT
	1261	ELSE
	1262	i = i + 1
	1263	ENDIF
	1264
[1]	1265	ENDDO
	1266
	1267	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
	1268	TRIM( gradients ), TRIM( slices )
	1269
	1270	!-- Profile of the geostrophic wind (component vg)
	1271	!-- Building output strings
	1272	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
	1273	gradients = '------'
	1274	slices = ' 0'
	1275	coordinates = ' 0.0'
	1276	i = 1
	1277	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
	1278
[167]	1279	WRITE (coor_chr,'(F6.2,1X)') vg(vg_vertical_gradient_level_ind(i))
[1]	1280	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
	1281
[167]	1282	WRITE (coor_chr,'(F6.2,1X)') vg_vertical_gradient(i)
[1]	1283	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1284
[167]	1285	WRITE (coor_chr,'(I6,1X)') vg_vertical_gradient_level_ind(i)
[1]	1286	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1287
[167]	1288	WRITE (coor_chr,'(F6.1,1X)') vg_vertical_gradient_level(i)
[1]	1289	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1290
[430]	1291	IF ( i == 10 ) THEN
	1292	EXIT
	1293	ELSE
	1294	i = i + 1
	1295	ENDIF
	1296
[1]	1297	ENDDO
	1298
	1299	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
	1300	TRIM( gradients ), TRIM( slices )
	1301
	1302	!
[767]	1303	!-- Initial wind profiles
	1304	IF ( u_profile(1) /= 9999999.9 ) WRITE ( io, 427 )
	1305
	1306	!
[1]	1307	!-- Initial temperature profile
	1308	!-- Building output strings, starting with surface temperature
	1309	WRITE ( temperatures, '(F6.2)' ) pt_surface
	1310	gradients = '------'
	1311	slices = ' 0'
	1312	coordinates = ' 0.0'
	1313	i = 1
	1314	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
	1315
[94]	1316	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
	1317	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
[1]	1318
[94]	1319	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
	1320	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
[1]	1321
[94]	1322	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
	1323	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
[1]	1324
[94]	1325	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
	1326	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
[1]	1327
[430]	1328	IF ( i == 10 ) THEN
	1329	EXIT
	1330	ELSE
	1331	i = i + 1
	1332	ENDIF
	1333
[1]	1334	ENDDO
	1335
	1336	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
	1337	TRIM( gradients ), TRIM( slices )
	1338
	1339	!
	1340	!-- Initial humidity profile
	1341	!-- Building output strings, starting with surface humidity
[75]	1342	IF ( humidity .OR. passive_scalar ) THEN
[1]	1343	WRITE ( temperatures, '(E8.1)' ) q_surface
	1344	gradients = '--------'
	1345	slices = ' 0'
	1346	coordinates = ' 0.0'
	1347	i = 1
	1348	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
	1349
	1350	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
	1351	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1352
	1353	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
	1354	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1355
	1356	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
	1357	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1358
	1359	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
	1360	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1361
[430]	1362	IF ( i == 10 ) THEN
	1363	EXIT
	1364	ELSE
	1365	i = i + 1
	1366	ENDIF
	1367
[1]	1368	ENDDO
	1369
[75]	1370	IF ( humidity ) THEN
[1]	1371	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
	1372	TRIM( gradients ), TRIM( slices )
	1373	ELSE
	1374	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
	1375	TRIM( gradients ), TRIM( slices )
	1376	ENDIF
	1377	ENDIF
	1378
	1379	!
[97]	1380	!-- Initial salinity profile
	1381	!-- Building output strings, starting with surface salinity
	1382	IF ( ocean ) THEN
	1383	WRITE ( temperatures, '(F6.2)' ) sa_surface
	1384	gradients = '------'
	1385	slices = ' 0'
	1386	coordinates = ' 0.0'
	1387	i = 1
	1388	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
	1389
	1390	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
	1391	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1392
	1393	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
	1394	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1395
	1396	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
	1397	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1398
	1399	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
	1400	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1401
[430]	1402	IF ( i == 10 ) THEN
	1403	EXIT
	1404	ELSE
	1405	i = i + 1
	1406	ENDIF
	1407
[97]	1408	ENDDO
	1409
	1410	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
	1411	TRIM( gradients ), TRIM( slices )
	1412	ENDIF
	1413
	1414	!
[411]	1415	!-- Profile for the large scale vertial velocity
	1416	!-- Building output strings, starting with surface value
	1417	IF ( large_scale_subsidence ) THEN
	1418	temperatures = ' 0.0'
	1419	gradients = '------'
	1420	slices = ' 0'
	1421	coordinates = ' 0.0'
	1422	i = 1
[580]	1423	DO WHILE ( subs_vertical_gradient_level_i(i) /= -9999 )
[411]	1424
	1425	WRITE (coor_chr,'(E10.2,7X)') &
[580]	1426	w_subs(subs_vertical_gradient_level_i(i))
[411]	1427	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1428
[580]	1429	WRITE (coor_chr,'(E10.2,7X)') subs_vertical_gradient(i)
[411]	1430	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1431
[580]	1432	WRITE (coor_chr,'(I10,7X)') subs_vertical_gradient_level_i(i)
[411]	1433	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1434
[580]	1435	WRITE (coor_chr,'(F10.2,7X)') subs_vertical_gradient_level(i)
[411]	1436	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1437
[430]	1438	IF ( i == 10 ) THEN
	1439	EXIT
	1440	ELSE
	1441	i = i + 1
	1442	ENDIF
	1443
[411]	1444	ENDDO
	1445
	1446	WRITE ( io, 426 ) TRIM( coordinates ), TRIM( temperatures ), &
	1447	TRIM( gradients ), TRIM( slices )
	1448	ENDIF
	1449
	1450	!
[824]	1451	!-- Cloud physcis parameters / quantities / numerical methods
	1452	WRITE ( io, 430 )
	1453	IF ( humidity .AND. .NOT. cloud_physics .AND. .NOT. cloud_droplets) THEN
	1454	WRITE ( io, 431 )
	1455	ELSEIF ( humidity .AND. cloud_physics ) THEN
	1456	WRITE ( io, 432 )
	1457	IF ( radiation ) WRITE ( io, 132 )
	1458	IF ( precipitation ) WRITE ( io, 133 )
	1459	ELSEIF ( humidity .AND. cloud_droplets ) THEN
	1460	WRITE ( io, 433 )
	1461	IF ( curvature_solution_effects ) WRITE ( io, 434 )
[825]	1462	IF ( collision_kernel /= 'none' ) THEN
	1463	WRITE ( io, 435 ) TRIM( collision_kernel )
[828]	1464	IF ( collision_kernel(6:9) == 'fast' ) THEN
	1465	WRITE ( io, 436 ) radius_classes, dissipation_classes
	1466	ENDIF
[825]	1467	ELSE
[828]	1468	WRITE ( io, 437 )
[825]	1469	ENDIF
[824]	1470	ENDIF
	1471
	1472	!
[1]	1473	!-- LES / turbulence parameters
	1474	WRITE ( io, 450 )
	1475
	1476	!--
	1477	! ... LES-constants used must still be added here
	1478	!--
	1479	IF ( constant_diffusion ) THEN
	1480	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
	1481	prandtl_number
	1482	ENDIF
	1483	IF ( .NOT. constant_diffusion) THEN
[108]	1484	IF ( e_init > 0.0 ) WRITE ( io, 455 ) e_init
[1]	1485	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
	1486	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
	1487	ENDIF
	1488
	1489	!
	1490	!-- Special actions during the run
	1491	WRITE ( io, 470 )
	1492	IF ( create_disturbances ) THEN
	1493	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
	1494	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
	1495	zu(disturbance_level_ind_t), disturbance_level_ind_t
[707]	1496	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
[1]	1497	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
	1498	ELSE
	1499	WRITE ( io, 473 ) disturbance_energy_limit
	1500	ENDIF
	1501	WRITE ( io, 474 ) TRIM( random_generator )
	1502	ENDIF
	1503	IF ( pt_surface_initial_change /= 0.0 ) THEN
	1504	WRITE ( io, 475 ) pt_surface_initial_change
	1505	ENDIF
[75]	1506	IF ( humidity .AND. q_surface_initial_change /= 0.0 ) THEN
[1]	1507	WRITE ( io, 476 ) q_surface_initial_change
	1508	ENDIF
	1509	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
	1510	WRITE ( io, 477 ) q_surface_initial_change
	1511	ENDIF
	1512
[60]	1513	IF ( particle_advection ) THEN
[1]	1514	!
[60]	1515	!-- Particle attributes
	1516	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
	1517	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
[117]	1518	end_time_prel, dt_sort_particles
[60]	1519	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
	1520	IF ( random_start_position ) WRITE ( io, 481 )
	1521	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
	1522	WRITE ( io, 495 ) total_number_of_particles
[824]	1523	IF ( use_particle_tails .AND. maximum_number_of_tailpoints /= 0 ) THEN
[60]	1524	WRITE ( io, 483 ) maximum_number_of_tailpoints
	1525	IF ( minimum_tailpoint_distance /= 0 ) THEN
	1526	WRITE ( io, 484 ) total_number_of_tails, &
	1527	minimum_tailpoint_distance, &
	1528	maximum_tailpoint_age
	1529	ENDIF
[1]	1530	ENDIF
[60]	1531	IF ( dt_write_particle_data /= 9999999.9 ) THEN
	1532	WRITE ( io, 485 ) dt_write_particle_data
[1031]	1533	output_format = ' '
[60]	1534	IF ( netcdf_output ) THEN
[493]	1535	IF ( netcdf_data_format > 1 ) THEN
[60]	1536	output_format = 'netcdf (64 bit offset) and binary'
	1537	ELSE
	1538	output_format = 'netcdf and binary'
	1539	ENDIF
[1]	1540	ELSE
[60]	1541	output_format = 'binary'
[1]	1542	ENDIF
[292]	1543	WRITE ( io, 344 ) output_format
[1]	1544	ENDIF
[60]	1545	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
	1546	IF ( write_particle_statistics ) WRITE ( io, 486 )
[1]	1547
[60]	1548	WRITE ( io, 487 ) number_of_particle_groups
[1]	1549
[60]	1550	DO i = 1, number_of_particle_groups
	1551	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
	1552	WRITE ( io, 490 ) i, 0.0
	1553	WRITE ( io, 492 )
[1]	1554	ELSE
[60]	1555	WRITE ( io, 490 ) i, radius(i)
	1556	IF ( density_ratio(i) /= 0.0 ) THEN
	1557	WRITE ( io, 491 ) density_ratio(i)
	1558	ELSE
	1559	WRITE ( io, 492 )
	1560	ENDIF
[1]	1561	ENDIF
[60]	1562	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
	1563	pdx(i), pdy(i), pdz(i)
[336]	1564	IF ( .NOT. vertical_particle_advection(i) ) WRITE ( io, 482 )
[60]	1565	ENDDO
[1]	1566
[60]	1567	ENDIF
[1]	1568
[60]	1569
[1]	1570	!
	1571	!-- Parameters of 1D-model
	1572	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
	1573	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
	1574	mixing_length_1d, dissipation_1d
	1575	IF ( damp_level_ind_1d /= nzt+1 ) THEN
	1576	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
	1577	ENDIF
	1578	ENDIF
	1579
	1580	!
	1581	!-- User-defined informations
	1582	CALL user_header( io )
	1583
	1584	WRITE ( io, 99 )
	1585
	1586	!
	1587	!-- Write buffer contents to disc immediately
[82]	1588	CALL local_flush( io )
[1]	1589
	1590	!
	1591	!-- Here the FORMATs start
	1592
	1593	99 FORMAT (1X,78('-'))
[1106]	1594	100 FORMAT (/1X,'******************************',6X,42('-')/ &
	1595	1X,'* ',A,' *',6X,A/ &
	1596	1X,'******************************',6X,42('-'))
[291]	1597	101 FORMAT (37X,'coupled run using MPI-',I1,': ',A/ &
[102]	1598	37X,42('-'))
[1106]	1599	102 FORMAT (/' Date: ',A8,6X,'Run: ',A20/ &
	1600	' Time: ',A8,6X,'Run-No.: ',I2.2/ &
	1601	' Run on host: ',A10)
[1]	1602	#if defined( __parallel )
[1106]	1603	103 FORMAT (' Number of PEs:',10X,I6,6X,'Processor grid (x,y): (',I3,',',I3, &
[1]	1604	')',1X,A)
[200]	1605	104 FORMAT (' Number of PEs:',8X,I5,9X,'Tasks:',I4,' threads per task:',I4/ &
[1]	1606	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
[102]	1607	105 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
	1608	106 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
[1]	1609	37X,'because the job is running on an SMP-cluster')
[102]	1610	107 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
[759]	1611	108 FORMAT (37X,'Max. # of parallel I/O streams is ',I5)
[1106]	1612	109 FORMAT (37X,'Precursor run for coupled atmos-ocean run'/ &
	1613	37X,42('-'))
	1614	114 FORMAT (37X,'Coupled atmosphere-ocean run following'/ &
	1615	37X,'independent precursor runs'/ &
	1616	37X,42('-'))
[1111]	1617	117 FORMAT (' Accelerator boards / node: ',I2)
[1]	1618	#endif
	1619	110 FORMAT (/' Numerical Schemes:'/ &
	1620	' -----------------'/)
	1621	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
	1622	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
	1623	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
	1624	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
	1625	' or Upstream')
	1626	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
	1627	' or Upstream')
	1628	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
[1106]	1629	119 FORMAT (' --> Galilei-Transform applied to horizontal advection:'/ &
	1630	' translation velocity = ',A/ &
[1]	1631	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
[1111]	1632	120 FORMAT (' Accelerator boards: ',8X,I2)
[1]	1633	122 FORMAT (' --> Time differencing scheme: ',A)
[108]	1634	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
[1]	1635	' maximum damping coefficient: ',F5.3, ' 1/s')
	1636	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
	1637	130 FORMAT (' --> Additional prognostic equation for the total water content')
[940]	1638	131 FORMAT (' --> No pt-equation solved. Neutral stratification with pt = ', &
	1639	F6.2, ' K assumed')
[824]	1640	132 FORMAT (' Parameterization of long-wave radiation processes via'/ &
[1]	1641	' effective emissivity scheme')
[824]	1642	133 FORMAT (' Precipitation parameterization via Kessler-Scheme')
[1]	1643	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
	1644	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
	1645	A,'-cycle)'/ &
	1646	' number of grid levels: ',I2/ &
	1647	' Gauss-Seidel red/black iterations: ',I2)
	1648	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1649	I3,')')
	1650	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
	1651	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1652	I3,')'/ &
	1653	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
	1654	I3,')')
	1655	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
[63]	1656	139 FORMAT (' --> Loop optimization method: ',A)
[1]	1657	140 FORMAT (' maximum residual allowed: ',E10.3)
	1658	141 FORMAT (' fixed number of multigrid cycles: ',I4)
	1659	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
	1660	'step')
[87]	1661	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
	1662	'kinetic energy')
[927]	1663	144 FORMAT (' masking method is used')
[1]	1664	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
[241]	1665	'conserved'/ &
	1666	' using the ',A,' mode')
	1667	151 FORMAT (' with u_bulk = ',F7.3,' m/s and v_bulk = ',F7.3,' m/s')
[306]	1668	152 FORMAT (' --> External pressure gradient directly prescribed by the user:',&
	1669	/' ',2(1X,E12.5),'Pa/m in x/y direction', &
	1670	/' starting from dp_level_b =', F8.3, 'm', A /)
[411]	1671	153 FORMAT (' --> Large-scale vertical motion is used in the ', &
	1672	'prognostic equation for')
	1673	154 FORMAT (' the potential temperature')
[1]	1674	200 FORMAT (//' Run time and time step information:'/ &
	1675	' ----------------------------------'/)
[1106]	1676	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
[1]	1677	' CFL-factor: ',F4.2)
[1106]	1678	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
	1679	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
	1680	' End time: ',F9.3,' s')
[1]	1681	204 FORMAT ( A,F9.3,' s')
	1682	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
[1106]	1683	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
	1684	' CPU-time used: ',F9.3,' s per timestep: ', &
	1685	' ',F9.3,' s'/ &
[1111]	1686	' per second of simulated tim', &
[1]	1687	'e: ',F9.3,' s')
[1106]	1688	207 FORMAT ( ' Coupling start time: ',F9.3,' s')
[1]	1689	250 FORMAT (//' Computational grid and domain size:'/ &
	1690	' ----------------------------------'// &
	1691	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
	1692	' m dz = ',F7.3,' m'/ &
	1693	' Domain size: x = ',F10.3,' m y = ',F10.3, &
	1694	' m z(u) = ',F10.3,' m'/)
	1695	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
	1696	' factor: ',F5.3/ &
	1697	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
	1698	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
	1699	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
	1700	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
	1701	' degrees')
	1702	270 FORMAT (//' Topography informations:'/ &
	1703	' -----------------------'// &
	1704	1X,'Topography: ',A)
	1705	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
	1706	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
	1707	' / ',I4)
[240]	1708	272 FORMAT ( ' Single quasi-2D street canyon of infinite length in ',A, &
	1709	' direction' / &
	1710	' Canyon height: ', F6.2, 'm, ch = ', I4, '.' / &
	1711	' Canyon position (',A,'-walls): cxl = ', I4,', cxr = ', I4, '.')
[256]	1712	278 FORMAT (' Topography grid definition convention:'/ &
	1713	' cell edge (staggered grid points'/ &
	1714	' (u in x-direction, v in y-direction))' /)
	1715	279 FORMAT (' Topography grid definition convention:'/ &
	1716	' cell center (scalar grid points)' /)
[138]	1717	280 FORMAT (//' Vegetation canopy (drag) model:'/ &
	1718	' ------------------------------'// &
	1719	' Canopy mode: ', A / &
	1720	' Canopy top: ',I4 / &
	1721	' Leaf drag coefficient: ',F6.2 /)
[153]	1722	281 FORMAT (/ ' Scalar_exchange_coefficient: ',F6.2 / &
	1723	' Scalar concentration at leaf surfaces in kg/m**3: ',F6.2 /)
	1724	282 FORMAT (' Predefined constant heatflux at the top of the vegetation: ',F6.2,' K m/s')
	1725	283 FORMAT (/ ' Characteristic levels of the leaf area density:'// &
[138]	1726	' Height: ',A,' m'/ &
	1727	' Leaf area density: ',A,' m2/m3'/ &
	1728	' Gradient: ',A,' m2/m4'/ &
	1729	' Gridpoint: ',A)
	1730
[1]	1731	300 FORMAT (//' Boundary conditions:'/ &
	1732	' -------------------'// &
	1733	' p uv ', &
	1734	' pt'// &
	1735	' B. bound.: ',A/ &
	1736	' T. bound.: ',A)
[97]	1737	301 FORMAT (/' ',A// &
[1]	1738	' B. bound.: ',A/ &
	1739	' T. bound.: ',A)
[19]	1740	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
	1741	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
	1742	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
	1743	'computational u,v-level:'// &
[978]	1744	' zp = ',F6.2,' m z0 = ',F6.4,' m z0h = ',F7.5,&
	1745	' m kappa = ',F4.2/ &
[1]	1746	' Rif value range: ',F6.2,' <= rif <=',F6.2)
[97]	1747	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
[1]	1748	307 FORMAT (' Heatflux has a random normal distribution')
	1749	308 FORMAT (' Predefined surface temperature')
[97]	1750	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
[1]	1751	310 FORMAT (//' 1D-Model:'// &
	1752	' Rif value range: ',F6.2,' <= rif <=',F6.2)
	1753	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
	1754	312 FORMAT (' Predefined surface humidity')
	1755	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
	1756	314 FORMAT (' Predefined scalar value at the surface')
[19]	1757	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
[102]	1758	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
	1759	'atmosphere model')
[1]	1760	317 FORMAT (//' Lateral boundaries:'/ &
	1761	' left/right: ',A/ &
	1762	' north/south: ',A)
[978]	1763	318 FORMAT (/' pt damping layer width = ',F7.2,' m, pt ', &
	1764	'damping factor = ',F6.4)
[151]	1765	319 FORMAT (' turbulence recycling at inflow switched on'/ &
	1766	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
	1767	' inflow damping height: ',F6.1,' m width: ',F6.1,' m')
	1768	320 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
[103]	1769	' v: ',F9.6,' m2/s2')
[151]	1770	325 FORMAT (//' List output:'/ &
[1]	1771	' -----------'// &
	1772	' 1D-Profiles:'/ &
	1773	' Output every ',F8.2,' s')
[151]	1774	326 FORMAT (' Time averaged over ',F8.2,' s'/ &
[1]	1775	' Averaging input every ',F8.2,' s')
	1776	330 FORMAT (//' Data output:'/ &
	1777	' -----------'/)
	1778	331 FORMAT (/' 1D-Profiles:')
	1779	332 FORMAT (/' ',A)
	1780	333 FORMAT (' Output every ',F8.2,' s',/ &
	1781	' Time averaged over ',F8.2,' s'/ &
	1782	' Averaging input every ',F8.2,' s')
	1783	334 FORMAT (/' 2D-Arrays',A,':')
	1784	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1785	' Output every ',F8.2,' s ',A/ &
	1786	' Cross sections at ',A1,' = ',A/ &
	1787	' scalar-coordinates: ',A,' m'/)
	1788	336 FORMAT (/' 3D-Arrays',A,':')
	1789	337 FORMAT (/' Arrays: ',A/ &
	1790	' Output every ',F8.2,' s ',A/ &
	1791	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
	1792	338 FORMAT (' Compressed data output'/ &
	1793	' Decimal precision: ',A/)
	1794	339 FORMAT (' No output during initial ',F8.2,' s')
	1795	340 FORMAT (/' Time series:')
	1796	341 FORMAT (' Output every ',F8.2,' s'/)
	1797	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1798	' Output every ',F8.2,' s ',A/ &
	1799	' Time averaged over ',F8.2,' s'/ &
	1800	' Averaging input every ',F8.2,' s'/ &
	1801	' Cross sections at ',A1,' = ',A/ &
	1802	' scalar-coordinates: ',A,' m'/)
	1803	343 FORMAT (/' Arrays: ',A/ &
	1804	' Output every ',F8.2,' s ',A/ &
	1805	' Time averaged over ',F8.2,' s'/ &
	1806	' Averaging input every ',F8.2,' s'/ &
	1807	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
[292]	1808	344 FORMAT (' Output format: ',A/)
[410]	1809	345 FORMAT (/' Scaling lengths for output locations of all subsequent mask IDs:',/ &
	1810	' mask_scale_x (in x-direction): ',F9.3, ' m',/ &
	1811	' mask_scale_y (in y-direction): ',F9.3, ' m',/ &
	1812	' mask_scale_z (in z-direction): ',F9.3, ' m' )
	1813	346 FORMAT (/' Masked data output',A,' for mask ID ',I2, ':')
	1814	347 FORMAT (' Variables: ',A/ &
	1815	' Output every ',F8.2,' s')
	1816	348 FORMAT (' Variables: ',A/ &
	1817	' Output every ',F8.2,' s'/ &
	1818	' Time averaged over ',F8.2,' s'/ &
	1819	' Averaging input every ',F8.2,' s')
	1820	349 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
	1821	'mask_scale_',A,' predefined by array mask_',I2.2,'_',A,':'/ &
	1822	13(' ',8(F8.2,',')/) )
	1823	350 FORMAT (/' Output locations in ',A,'-direction: ', &
	1824	'all gridpoints along ',A,'-direction (default).' )
	1825	351 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
	1826	'mask_scale_',A,' constructed from array mask_',I2.2,'_',A,'_loop:'/ &
	1827	' loop begin:',F8.2,', end:',F8.2,', stride:',F8.2 )
[1]	1828	#if defined( __dvrp_graphics )
	1829	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
	1830	' Output every ',F7.1,' s'/ &
	1831	' Output mode: ',A/ &
	1832	' Host / User: ',A,' / ',A/ &
	1833	' Directory: ',A// &
	1834	' The sequence contains:')
[337]	1835	361 FORMAT (/' Isosurface of "',A,'" Threshold value: ', E12.3/ &
	1836	' Isosurface color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
	1837	362 FORMAT (/' Slicer plane ',A/ &
[336]	1838	' Slicer limits: [',F6.2,',',F6.2,']')
[337]	1839	363 FORMAT (/' Particles'/ &
[336]	1840	' particle size: ',F7.2,' m')
	1841	364 FORMAT (' particle ',A,' controlled by "',A,'" with interval [', &
	1842	F6.2,',',F6.2,']')
[337]	1843	365 FORMAT (/' Groundplate color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)'/ &
[336]	1844	' Superelevation along (x,y,z): (',F4.1,',',F4.1,',',F4.1, &
	1845	')'/ &
	1846	' Clipping limits: from x = ',F9.1,' m to x = ',F9.1,' m'/ &
	1847	' from y = ',F9.1,' m to y = ',F9.1,' m')
[337]	1848	366 FORMAT (/' Topography color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
[336]	1849	367 FORMAT (' Polygon reduction for topography: cluster_size = ', I1)
[1]	1850	#endif
	1851	#if defined( __spectra )
	1852	370 FORMAT (' Spectra:')
	1853	371 FORMAT (' Output every ',F7.1,' s'/)
	1854	372 FORMAT (' Arrays: ', 10(A5,',')/ &
	1855	' Directions: ', 10(A5,',')/ &
[189]	1856	' height levels k = ', 20(I3,',')/ &
	1857	' ', 20(I3,',')/ &
	1858	' ', 20(I3,',')/ &
	1859	' ', 20(I3,',')/ &
	1860	' ', 19(I3,','),I3,'.'/ &
[1]	1861	' height levels selected for standard plot:'/ &
[189]	1862	' k = ', 20(I3,',')/ &
	1863	' ', 20(I3,',')/ &
	1864	' ', 20(I3,',')/ &
	1865	' ', 20(I3,',')/ &
	1866	' ', 19(I3,','),I3,'.'/ &
[1]	1867	' Time averaged over ', F7.1, ' s,' / &
	1868	' Profiles for the time averaging are taken every ', &
	1869	F6.1,' s')
	1870	#endif
	1871	400 FORMAT (//' Physical quantities:'/ &
	1872	' -------------------'/)
	1873	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
	1874	' Geograph. latitude : phi = ',F4.1,' degr'/ &
	1875	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
	1876	' f* = ',F9.6,' 1/s')
	1877	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
[97]	1878	412 FORMAT (/' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
	1879	413 FORMAT (/' Reference temperature in buoyancy terms: ',F8.4,' K')
[57]	1880	415 FORMAT (/' Cloud physics parameters:'/ &
[1]	1881	' ------------------------'/)
[57]	1882	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
[1]	1883	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
	1884	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
	1885	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
	1886	' Vapourization heat : L_v = ',E8.2,' J/kg')
	1887	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
	1888	' Height: ',A,' m'/ &
	1889	' Temperature: ',A,' K'/ &
	1890	' Gradient: ',A,' K/100m'/ &
	1891	' Gridpoint: ',A)
	1892	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
	1893	' Height: ',A,' m'/ &
	1894	' Humidity: ',A,' kg/kg'/ &
	1895	' Gradient: ',A,' (kg/kg)/100m'/ &
	1896	' Gridpoint: ',A)
	1897	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
	1898	' Height: ',A,' m'/ &
	1899	' Scalar concentration: ',A,' kg/m**3'/ &
	1900	' Gradient: ',A,' (kg/m**3)/100m'/ &
	1901	' Gridpoint: ',A)
	1902	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
	1903	' Height: ',A,' m'/ &
	1904	' ug: ',A,' m/s'/ &
	1905	' Gradient: ',A,' 1/100s'/ &
	1906	' Gridpoint: ',A)
	1907	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
	1908	' Height: ',A,' m'/ &
[97]	1909	' vg: ',A,' m/s'/ &
[1]	1910	' Gradient: ',A,' 1/100s'/ &
	1911	' Gridpoint: ',A)
[97]	1912	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
	1913	' Height: ',A,' m'/ &
	1914	' Salinity: ',A,' psu'/ &
	1915	' Gradient: ',A,' psu/100m'/ &
	1916	' Gridpoint: ',A)
[411]	1917	426 FORMAT (/' Characteristic levels of the subsidence/ascent profile:'// &
	1918	' Height: ',A,' m'/ &
	1919	' w_subs: ',A,' m/s'/ &
	1920	' Gradient: ',A,' (m/s)/100m'/ &
	1921	' Gridpoint: ',A)
[767]	1922	427 FORMAT (/' Initial wind profiles (u,v) are interpolated from given'// &
	1923	' profiles')
[824]	1924	430 FORMAT (//' Cloud physics quantities / methods:'/ &
	1925	' ----------------------------------'/)
	1926	431 FORMAT (' Humidity is treated as purely passive scalar (no condensati', &
	1927	'on)')
	1928	432 FORMAT (' Bulk scheme with liquid water potential temperature and'/ &
	1929	' total water content is used.'/ &
	1930	' Condensation is parameterized via 0% - or 100% scheme.')
	1931	433 FORMAT (' Cloud droplets treated explicitly using the Lagrangian part', &
	1932	'icle model')
	1933	434 FORMAT (' Curvature and solution effecs are considered for growth of', &
	1934	' droplets < 1.0E-6 m')
[825]	1935	435 FORMAT (' Droplet collision is handled by ',A,'-kernel')
[828]	1936	436 FORMAT (' Fast kernel with fixed radius- and dissipation classes ', &
	1937	'are used'/ &
	1938	' number of radius classes: ',I3,' interval ', &
	1939	'[1.0E-6,2.0E-4] m'/ &
	1940	' number of dissipation classes: ',I2,' interval ', &
	1941	'[0,1000] cm2/s3')
	1942	437 FORMAT (' Droplet collision is switched off')
[1]	1943	450 FORMAT (//' LES / Turbulence quantities:'/ &
	1944	' ---------------------------'/)
[824]	1945	451 FORMAT (' Diffusion coefficients are constant:'/ &
	1946	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
	1947	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
	1948	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
	1949	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
[1]	1950	470 FORMAT (//' Actions during the simulation:'/ &
	1951	' -----------------------------'/)
[94]	1952	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
	1953	' Disturbance amplitude : ',F4.2, ' m/s'/ &
	1954	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
	1955	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
[1]	1956	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
	1957	' to i/j =',I4)
	1958	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
	1959	1X,F5.3, ' m2/s2')
	1960	474 FORMAT (' Random number generator used : ',A/)
	1961	475 FORMAT (' The surface temperature is increased (or decreased, ', &
	1962	'respectively, if'/ &
	1963	' the value is negative) by ',F5.2,' K at the beginning of the',&
	1964	' 3D-simulation'/)
	1965	476 FORMAT (' The surface humidity is increased (or decreased, ',&
	1966	'respectively, if the'/ &
	1967	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
	1968	' the 3D-simulation'/)
	1969	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
	1970	'respectively, if the'/ &
	1971	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
	1972	' the 3D-simulation'/)
	1973	480 FORMAT (' Particles:'/ &
	1974	' ---------'// &
	1975	' Particle advection is active (switched on at t = ', F7.1, &
	1976	' s)'/ &
	1977	' Start of new particle generations every ',F6.1,' s'/ &
	1978	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
	1979	' bottom: ', A, ' top: ', A/&
	1980	' Maximum particle age: ',F9.1,' s'/ &
[117]	1981	' Advection stopped at t = ',F9.1,' s'/ &
	1982	' Particles are sorted every ',F9.1,' s'/)
[1]	1983	481 FORMAT (' Particles have random start positions'/)
[336]	1984	482 FORMAT (' Particles are advected only horizontally'/)
[1]	1985	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
	1986	484 FORMAT (' Number of tails of the total domain: ',I10/ &
	1987	' Minimum distance between tailpoints: ',F8.2,' m'/ &
	1988	' Maximum age of the end of the tail: ',F8.2,' s')
	1989	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
	1990	486 FORMAT (' Particle statistics are written on file'/)
	1991	487 FORMAT (' Number of particle groups: ',I2/)
	1992	488 FORMAT (' SGS velocity components are used for particle advection'/ &
	1993	' minimum timestep for advection: ', F7.5/)
	1994	489 FORMAT (' Number of particles simultaneously released at each ', &
	1995	'point: ', I5/)
	1996	490 FORMAT (' Particle group ',I2,':'/ &
	1997	' Particle radius: ',E10.3, 'm')
	1998	491 FORMAT (' Particle inertia is activated'/ &
	1999	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
	2000	492 FORMAT (' Particles are advected only passively (no inertia)'/)
	2001	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
	2002	' y:',F8.1,' - ',F8.1,' m'/&
	2003	' z:',F8.1,' - ',F8.1,' m'/&
	2004	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
	2005	' m dz = ',F8.1,' m'/)
	2006	494 FORMAT (' Output of particle time series in NetCDF format every ', &
	2007	F8.2,' s'/)
	2008	495 FORMAT (' Number of particles in total domain: ',I10/)
	2009	500 FORMAT (//' 1D-Model parameters:'/ &
	2010	' -------------------'// &
	2011	' Simulation time: ',F8.1,' s'/ &
	2012	' Run-controll output every: ',F8.1,' s'/ &
	2013	' Vertical profile output every: ',F8.1,' s'/ &
	2014	' Mixing length calculation: ',A/ &
	2015	' Dissipation calculation: ',A/)
	2016	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
[667]	2017	503 FORMAT (' --> Momentum advection via Wicker-Skamarock-Scheme 5th order')
	2018	504 FORMAT (' --> Scalar advection via Wicker-Skamarock-Scheme 5th order')
[1]	2019
	2020
	2021	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 1111

Download in other formats: