Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 1035

Last change on this file since 1035 was 1035, checked in by raasch, 12 years ago
revisions r1031 and r1034 documented
Property svn:keywords set to `Id`
File size: 75.6 KB

Rev	Line
[1]	1	SUBROUTINE header
	2
	3	!------------------------------------------------------------------------------!
[254]	4	! Current revisions:
[1]	5	! -----------------
[941]	6	!
[1035]	7	!
[392]	8	! Former revisions:
	9	! -----------------
	10	! $Id: header.f90 1035 2012-10-22 11:42:53Z raasch $
	11	!
[1035]	12	! 1031 2012-10-19 14:35:30Z raasch
	13	! output of netCDF data format modified
	14	!
[1017]	15	! 1015 2012-09-27 09:23:24Z raasch
	16	! output of Aajustment of mixing length to the Prandtl mixing length at first
	17	! grid point above ground removed
	18	!
[1004]	19	! 1003 2012-09-14 14:35:53Z raasch
	20	! output of information about equal/unequal subdomain size removed
	21	!
[1002]	22	! 1001 2012-09-13 14:08:46Z raasch
	23	! all actions concerning leapfrog- and upstream-spline-scheme removed
	24	!
[979]	25	! 978 2012-08-09 08:28:32Z fricke
	26	! -km_damp_max, outflow_damping_width
	27	! +pt_damping_factor, pt_damping_width
	28	! +z0h
	29	!
[965]	30	! 964 2012-07-26 09:14:24Z raasch
	31	! output of profil-related quantities removed
	32	!
[941]	33	! 940 2012-07-09 14:31:00Z raasch
	34	! Output in case of simulations for pure neutral stratification (no pt-equation
	35	! solved)
	36	!
[928]	37	! 927 2012-06-06 19:15:04Z raasch
	38	! output of masking_method for mg-solver
	39	!
[869]	40	! 868 2012-03-28 12:21:07Z raasch
	41	! translation velocity in Galilean transformation changed to 0.6 * ug
	42	!
[834]	43	! 833 2012-02-22 08:55:55Z maronga
	44	! Adjusted format for leaf area density
	45	!
[829]	46	! 828 2012-02-21 12:00:36Z raasch
	47	! output of dissipation_classes + radius_classes
	48	!
[826]	49	! 825 2012-02-19 03:03:44Z raasch
	50	! Output of cloud physics parameters/quantities complemented and restructured
	51	!
[768]	52	! 767 2011-10-14 06:39:12Z raasch
	53	! Output of given initial u,v-profiles
	54	!
[760]	55	! 759 2011-09-15 13:58:31Z raasch
	56	! output of maximum number of parallel io streams
	57	!
[708]	58	! 707 2011-03-29 11:39:40Z raasch
	59	! bc_lr/ns replaced by bc_lr/ns_cyc
	60	!
[668]	61	! 667 2010-12-23 12:06:00Z suehring/gryschka
	62	! Output of advection scheme.
	63	! Modified output of Prandtl-layer height.
	64	!
[581]	65	! 580 2010-10-05 13:59:11Z heinze
	66	! Renaming of ws_vertical_gradient to subs_vertical_gradient,
	67	! ws_vertical_gradient_level to subs_vertical_gradient_level and
	68	! ws_vertical_gradient_level_ind to subs_vertical_gradient_level_i
	69	!
[494]	70	! 493 2010-03-01 08:30:24Z raasch
	71	! NetCDF data output format extendend for NetCDF4/HDF5
	72	!
[482]	73	! 449 2010-02-02 11:23:59Z raasch
	74	! +large scale vertical motion (subsidence/ascent)
	75	! Bugfix: index problem concerning gradient_level indices removed
	76	!
[449]	77	! 410 2009-12-04 17:05:40Z letzel
	78	! Masked data output: + dt_domask, mask_01~20_x\|y\|z, mask_01~20_x\|y\|z_loop,
[493]	79	! mask_scale\|_x\|y\|z, masks, skip_time_domask
[449]	80	!
[392]	81	! 346 2009-07-06 10:13:41Z raasch
[328]	82	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
[291]	83	! Coupling with independent precursor runs.
[254]	84	! Output of messages replaced by message handling routine.
[336]	85	! Output of several additional dvr parameters
[240]	86	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
[241]	87	! canyon_wall_south, conserve_volume_flow_mode, dp_external, dp_level_b,
	88	! dp_smooth, dpdxy, u_bulk, v_bulk
[256]	89	! topography_grid_convention moved from user_header
[292]	90	! small bugfix concerning 3d 64bit netcdf output format
[1]	91	!
[226]	92	! 206 2008-10-13 14:59:11Z raasch
	93	! Bugfix: error in zu index in case of section_xy = -1
	94	!
[200]	95	! 198 2008-09-17 08:55:28Z raasch
	96	! Format adjustments allowing output of larger revision numbers
	97	!
[198]	98	! 197 2008-09-16 15:29:03Z raasch
	99	! allow 100 spectra levels instead of 10 for consistency with
	100	! define_netcdf_header,
	101	! bugfix in the output of the characteristic levels of potential temperature,
	102	! geostrophic wind, scalar concentration, humidity and leaf area density,
	103	! output of turbulence recycling informations
	104	!
[139]	105	! 138 2007-11-28 10:03:58Z letzel
	106	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
	107	! Allow two instead of one digit to specify isosurface and slicer variables.
	108	! Output of sorting frequency of particles
	109	!
[110]	110	! 108 2007-08-24 15:10:38Z letzel
	111	! Output of informations for coupled model runs (boundary conditions etc.)
	112	! + output of momentumfluxes at the top boundary
	113	! Rayleigh damping for ocean, e_init
	114	!
[98]	115	! 97 2007-06-21 08:23:15Z raasch
	116	! Adjustments for the ocean version.
	117	! use_pt_reference renamed use_reference
	118	!
[90]	119	! 87 2007-05-22 15:46:47Z raasch
	120	! Bugfix: output of use_upstream_for_tke
	121	!
[83]	122	! 82 2007-04-16 15:40:52Z raasch
	123	! Preprocessor strings for different linux clusters changed to "lc",
	124	! routine local_flush is used for buffer flushing
	125	!
[77]	126	! 76 2007-03-29 00:58:32Z raasch
	127	! Output of netcdf_64bit_3d, particles-package is now part of the default code,
	128	! output of the loop optimization method, moisture renamed humidity,
	129	! output of subversion revision number
	130	!
[39]	131	! 19 2007-02-23 04:53:48Z raasch
	132	! Output of scalar flux applied at top boundary
	133	!
[3]	134	! RCS Log replace by Id keyword, revision history cleaned up
	135	!
[1]	136	! Revision 1.63 2006/08/22 13:53:13 raasch
	137	! Output of dz_max
	138	!
	139	! Revision 1.1 1997/08/11 06:17:20 raasch
	140	! Initial revision
	141	!
	142	!
	143	! Description:
	144	! ------------
	145	! Writing a header with all important informations about the actual run.
	146	! This subroutine is called three times, two times at the beginning
	147	! (writing information on files RUN_CONTROL and HEADER) and one time at the
	148	! end of the run, then writing additional information about CPU-usage on file
	149	! header.
[411]	150	!-----------------------------------------------------------------------------!
[1]	151
	152	USE arrays_3d
	153	USE control_parameters
	154	USE cloud_parameters
	155	USE cpulog
	156	USE dvrp_variables
	157	USE grid_variables
	158	USE indices
	159	USE model_1d
	160	USE particle_attributes
	161	USE pegrid
[411]	162	USE subsidence_mod
[1]	163	USE spectrum
	164
	165	IMPLICIT NONE
	166
	167	CHARACTER (LEN=1) :: prec
	168	CHARACTER (LEN=2) :: do2d_mode
	169	CHARACTER (LEN=5) :: section_chr
	170	CHARACTER (LEN=9) :: time_to_string
	171	CHARACTER (LEN=10) :: coor_chr, host_chr
	172	CHARACTER (LEN=16) :: begin_chr
[200]	173	CHARACTER (LEN=23) :: ver_rev
[1]	174	CHARACTER (LEN=40) :: output_format
[167]	175	CHARACTER (LEN=70) :: char1, char2, dopr_chr, &
[1]	176	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
[410]	177	domask_chr, run_classification
[167]	178	CHARACTER (LEN=86) :: coordinates, gradients, learde, slices, &
	179	temperatures, ugcomponent, vgcomponent
[1]	180	CHARACTER (LEN=85) :: roben, runten
	181
[410]	182	CHARACTER (LEN=1), DIMENSION(1:3) :: dir = (/ 'x', 'y', 'z' /)
	183
	184	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, ch, count, cwx, cwy, &
	185	cxl, cxr, cyn, cys, dim, i, ihost, io, j, l, ll, m, mpi_type
[1]	186	REAL :: cpuseconds_per_simulated_second
	187
	188	!
	189	!-- Open the output file. At the end of the simulation, output is directed
	190	!-- to unit 19.
	191	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
	192	.NOT. simulated_time_at_begin /= simulated_time ) THEN
	193	io = 15 ! header output on file RUN_CONTROL
	194	ELSE
	195	io = 19 ! header output on file HEADER
	196	ENDIF
	197	CALL check_open( io )
	198
	199	!
	200	!-- At the end of the run, output file (HEADER) will be rewritten with
	201	!-- new informations
	202	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
	203
	204	!
	205	!-- Determine kind of model run
	206	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
	207	run_classification = '3D - restart run'
[328]	208	ELSEIF ( TRIM( initializing_actions ) == 'cyclic_fill' ) THEN
	209	run_classification = '3D - run with cyclic fill of 3D - prerun data'
[147]	210	ELSEIF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
	211	run_classification = '3D - run without 1D - prerun'
[197]	212	ELSEIF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[147]	213	run_classification = '3D - run with 1D - prerun'
[197]	214	ELSEIF ( INDEX( initializing_actions, 'by_user' ) /=0 ) THEN
	215	run_classification = '3D - run initialized by user'
[1]	216	ELSE
[254]	217	message_string = ' unknown action(s): ' // TRIM( initializing_actions )
	218	CALL message( 'header', 'PA0191', 0, 0, 0, 6, 0 )
[1]	219	ENDIF
[97]	220	IF ( ocean ) THEN
	221	run_classification = 'ocean - ' // run_classification
	222	ELSE
	223	run_classification = 'atmosphere - ' // run_classification
	224	ENDIF
[1]	225
	226	!
	227	!-- Run-identification, date, time, host
	228	host_chr = host(1:10)
[75]	229	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
[102]	230	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
[291]	231	IF ( TRIM( coupling_mode ) /= 'uncoupled' ) THEN
	232	#if defined( __mpi2 )
	233	mpi_type = 2
	234	#else
	235	mpi_type = 1
	236	#endif
	237	WRITE ( io, 101 ) mpi_type, coupling_mode
	238	ENDIF
[102]	239	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
	240	ADJUSTR( host_chr )
[1]	241	#if defined( __parallel )
	242	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
	243	char1 = 'calculated'
	244	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	245	host(1:2) == 'lc' ) .AND. &
	246	npex == -1 .AND. pdims(2) == 1 ) THEN
	247	char1 = 'forced'
	248	ELSE
	249	char1 = 'predefined'
	250	ENDIF
	251	IF ( threads_per_task == 1 ) THEN
[102]	252	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
[1]	253	ELSE
[102]	254	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
[1]	255	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
	256	ENDIF
	257	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	258	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
	259	npex == -1 .AND. pdims(2) == 1 ) &
	260	THEN
[102]	261	WRITE ( io, 106 )
[1]	262	ELSEIF ( pdims(2) == 1 ) THEN
[102]	263	WRITE ( io, 107 ) 'x'
[1]	264	ELSEIF ( pdims(1) == 1 ) THEN
[102]	265	WRITE ( io, 107 ) 'y'
[1]	266	ENDIF
[102]	267	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 105 )
[759]	268	IF ( numprocs /= maximum_parallel_io_streams ) THEN
	269	WRITE ( io, 108 ) maximum_parallel_io_streams
	270	ENDIF
[1]	271	#endif
	272	WRITE ( io, 99 )
	273
	274	!
	275	!-- Numerical schemes
	276	WRITE ( io, 110 )
	277	IF ( psolver(1:7) == 'poisfft' ) THEN
	278	WRITE ( io, 111 ) TRIM( fft_method )
	279	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
	280	ELSEIF ( psolver == 'sor' ) THEN
	281	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
	282	ELSEIF ( psolver == 'multigrid' ) THEN
	283	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
	284	IF ( mg_cycles == -1 ) THEN
	285	WRITE ( io, 140 ) residual_limit
	286	ELSE
	287	WRITE ( io, 141 ) mg_cycles
	288	ENDIF
	289	IF ( mg_switch_to_pe0_level == 0 ) THEN
	290	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	291	nzt_mg(1)
[197]	292	ELSEIF ( mg_switch_to_pe0_level /= -1 ) THEN
[1]	293	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
	294	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
	295	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
	296	nzt_mg(mg_switch_to_pe0_level), &
	297	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	298	nzt_mg(1)
	299	ENDIF
[927]	300	IF ( masking_method ) WRITE ( io, 144 )
[1]	301	ENDIF
	302	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
	303	THEN
	304	WRITE ( io, 142 )
	305	ENDIF
	306
	307	IF ( momentum_advec == 'pw-scheme' ) THEN
	308	WRITE ( io, 113 )
[667]	309	ELSEIF (momentum_advec == 'ws-scheme' ) THEN
	310	WRITE ( io, 503 )
[1]	311	ENDIF
	312	IF ( scalar_advec == 'pw-scheme' ) THEN
	313	WRITE ( io, 116 )
[667]	314	ELSEIF ( scalar_advec == 'ws-scheme' ) THEN
	315	WRITE ( io, 504 )
[1]	316	ELSE
	317	WRITE ( io, 118 )
	318	ENDIF
[63]	319
	320	WRITE ( io, 139 ) TRIM( loop_optimization )
	321
[1]	322	IF ( galilei_transformation ) THEN
	323	IF ( use_ug_for_galilei_tr ) THEN
[868]	324	char1 = '0.6 * geostrophic wind'
[1]	325	ELSE
	326	char1 = 'mean wind in model domain'
	327	ENDIF
	328	IF ( simulated_time_at_begin == simulated_time ) THEN
	329	char2 = 'at the start of the run'
	330	ELSE
	331	char2 = 'at the end of the run'
	332	ENDIF
	333	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
	334	advected_distance_x/1000.0, advected_distance_y/1000.0
	335	ENDIF
[1001]	336	WRITE ( io, 122 ) timestep_scheme
[87]	337	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
[1]	338	IF ( rayleigh_damping_factor /= 0.0 ) THEN
[108]	339	IF ( .NOT. ocean ) THEN
	340	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
	341	rayleigh_damping_factor
	342	ELSE
	343	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
	344	rayleigh_damping_factor
	345	ENDIF
[1]	346	ENDIF
[940]	347	IF ( neutral ) WRITE ( io, 131 ) pt_surface
[75]	348	IF ( humidity ) THEN
[1]	349	IF ( .NOT. cloud_physics ) THEN
	350	WRITE ( io, 129 )
	351	ELSE
	352	WRITE ( io, 130 )
	353	ENDIF
	354	ENDIF
	355	IF ( passive_scalar ) WRITE ( io, 134 )
[240]	356	IF ( conserve_volume_flow ) THEN
[241]	357	WRITE ( io, 150 ) conserve_volume_flow_mode
	358	IF ( TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
	359	WRITE ( io, 151 ) u_bulk, v_bulk
	360	ENDIF
[240]	361	ELSEIF ( dp_external ) THEN
	362	IF ( dp_smooth ) THEN
[241]	363	WRITE ( io, 152 ) dpdxy, dp_level_b, ', vertically smoothed.'
[240]	364	ELSE
[241]	365	WRITE ( io, 152 ) dpdxy, dp_level_b, '.'
[240]	366	ENDIF
	367	ENDIF
[411]	368	IF ( large_scale_subsidence ) THEN
	369	WRITE ( io, 153 )
	370	WRITE ( io, 154 )
	371	ENDIF
[1]	372	WRITE ( io, 99 )
	373
	374	!
	375	!-- Runtime and timestep informations
	376	WRITE ( io, 200 )
	377	IF ( .NOT. dt_fixed ) THEN
	378	WRITE ( io, 201 ) dt_max, cfl_factor
	379	ELSE
	380	WRITE ( io, 202 ) dt
	381	ENDIF
	382	WRITE ( io, 203 ) simulated_time_at_begin, end_time
	383
	384	IF ( time_restart /= 9999999.9 .AND. &
	385	simulated_time_at_begin == simulated_time ) THEN
	386	IF ( dt_restart == 9999999.9 ) THEN
	387	WRITE ( io, 204 ) ' Restart at: ',time_restart
	388	ELSE
	389	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
	390	ENDIF
	391	ENDIF
	392
	393	IF ( simulated_time_at_begin /= simulated_time ) THEN
	394	i = MAX ( log_point_s(10)%counts, 1 )
	395	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
	396	cpuseconds_per_simulated_second = 0.0
	397	ELSE
	398	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
	399	( simulated_time - &
	400	simulated_time_at_begin )
	401	ENDIF
	402	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
	403	log_point_s(10)%sum / REAL( i ), &
	404	cpuseconds_per_simulated_second
	405	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
	406	IF ( dt_restart == 9999999.9 ) THEN
	407	WRITE ( io, 204 ) ' Next restart at: ',time_restart
	408	ELSE
	409	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
	410	ENDIF
	411	ENDIF
	412	ENDIF
	413
	414	!
[291]	415	!-- Start time for coupled runs, if independent precursor runs for atmosphere
	416	!-- and ocean are used. In this case, coupling_start_time defines the time
	417	!-- when the coupling is switched on.
	418	IF ( coupling_start_time /= 0.0 ) THEN
	419	IF ( coupling_start_time >= simulated_time_at_begin ) THEN
	420	char1 = 'Precursor run for a coupled atmosphere-ocean run'
	421	ELSE
	422	char1 = 'Coupled atmosphere-ocean run following independent ' // &
	423	'precursor runs'
	424	ENDIF
	425	WRITE ( io, 207 ) char1, coupling_start_time
	426	ENDIF
	427
	428	!
[1]	429	!-- Computational grid
[94]	430	IF ( .NOT. ocean ) THEN
	431	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
	432	IF ( dz_stretch_level_index < nzt+1 ) THEN
	433	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	434	dz_stretch_factor, dz_max
	435	ENDIF
	436	ELSE
	437	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(0)
	438	IF ( dz_stretch_level_index > 0 ) THEN
	439	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	440	dz_stretch_factor, dz_max
	441	ENDIF
[1]	442	ENDIF
	443	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
	444	MIN( nnz+2, nzt+2 )
	445	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
	446
	447	!
	448	!-- Topography
	449	WRITE ( io, 270 ) topography
	450	SELECT CASE ( TRIM( topography ) )
	451
	452	CASE ( 'flat' )
	453	! no actions necessary
	454
	455	CASE ( 'single_building' )
	456	blx = INT( building_length_x / dx )
	457	bly = INT( building_length_y / dy )
	458	bh = INT( building_height / dz )
	459
	460	IF ( building_wall_left == 9999999.9 ) THEN
	461	building_wall_left = ( nx + 1 - blx ) / 2 * dx
	462	ENDIF
	463	bxl = INT ( building_wall_left / dx + 0.5 )
	464	bxr = bxl + blx
	465
	466	IF ( building_wall_south == 9999999.9 ) THEN
	467	building_wall_south = ( ny + 1 - bly ) / 2 * dy
	468	ENDIF
	469	bys = INT ( building_wall_south / dy + 0.5 )
	470	byn = bys + bly
	471
	472	WRITE ( io, 271 ) building_length_x, building_length_y, &
	473	building_height, bxl, bxr, bys, byn
	474
[240]	475	CASE ( 'single_street_canyon' )
	476	ch = NINT( canyon_height / dz )
	477	IF ( canyon_width_x /= 9999999.9 ) THEN
	478	!
	479	!-- Street canyon in y direction
	480	cwx = NINT( canyon_width_x / dx )
	481	IF ( canyon_wall_left == 9999999.9 ) THEN
	482	canyon_wall_left = ( nx + 1 - cwx ) / 2 * dx
	483	ENDIF
	484	cxl = NINT( canyon_wall_left / dx )
	485	cxr = cxl + cwx
	486	WRITE ( io, 272 ) 'y', canyon_height, ch, 'u', cxl, cxr
	487
	488	ELSEIF ( canyon_width_y /= 9999999.9 ) THEN
	489	!
	490	!-- Street canyon in x direction
	491	cwy = NINT( canyon_width_y / dy )
	492	IF ( canyon_wall_south == 9999999.9 ) THEN
	493	canyon_wall_south = ( ny + 1 - cwy ) / 2 * dy
	494	ENDIF
	495	cys = NINT( canyon_wall_south / dy )
	496	cyn = cys + cwy
	497	WRITE ( io, 272 ) 'x', canyon_height, ch, 'v', cys, cyn
	498	ENDIF
	499
[1]	500	END SELECT
	501
[256]	502	IF ( TRIM( topography ) /= 'flat' ) THEN
	503	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
	504	IF ( TRIM( topography ) == 'single_building' .OR. &
	505	TRIM( topography ) == 'single_street_canyon' ) THEN
	506	WRITE ( io, 278 )
	507	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
	508	WRITE ( io, 279 )
	509	ENDIF
	510	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_edge' ) THEN
	511	WRITE ( io, 278 )
	512	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_center' ) THEN
	513	WRITE ( io, 279 )
	514	ENDIF
	515	ENDIF
	516
[138]	517	IF ( plant_canopy ) THEN
	518
	519	WRITE ( io, 280 ) canopy_mode, pch_index, drag_coefficient
[153]	520	IF ( passive_scalar ) THEN
	521	WRITE ( io, 281 ) scalar_exchange_coefficient, &
	522	leaf_surface_concentration
	523	ENDIF
[138]	524
[1]	525	!
[153]	526	!-- Heat flux at the top of vegetation
	527	WRITE ( io, 282 ) cthf
	528
	529	!
[138]	530	!-- Leaf area density profile
	531	!-- Building output strings, starting with surface value
[833]	532	WRITE ( learde, '(F6.4)' ) lad_surface
[138]	533	gradients = '------'
	534	slices = ' 0'
	535	coordinates = ' 0.0'
	536	i = 1
	537	DO WHILE ( lad_vertical_gradient_level_ind(i) /= -9999 )
	538
	539	WRITE (coor_chr,'(F7.2)') lad(lad_vertical_gradient_level_ind(i))
	540	learde = TRIM( learde ) // ' ' // TRIM( coor_chr )
	541
	542	WRITE (coor_chr,'(F7.2)') lad_vertical_gradient(i)
	543	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	544
	545	WRITE (coor_chr,'(I7)') lad_vertical_gradient_level_ind(i)
	546	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	547
	548	WRITE (coor_chr,'(F7.1)') lad_vertical_gradient_level(i)
	549	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	550
	551	i = i + 1
	552	ENDDO
	553
[153]	554	WRITE ( io, 283 ) TRIM( coordinates ), TRIM( learde ), &
[138]	555	TRIM( gradients ), TRIM( slices )
	556
	557	ENDIF
	558
	559	!
[1]	560	!-- Boundary conditions
	561	IF ( ibc_p_b == 0 ) THEN
	562	runten = 'p(0) = 0 \|'
	563	ELSEIF ( ibc_p_b == 1 ) THEN
	564	runten = 'p(0) = p(1) \|'
	565	ELSE
	566	runten = 'p(0) = p(1) +R\|'
	567	ENDIF
	568	IF ( ibc_p_t == 0 ) THEN
	569	roben = 'p(nzt+1) = 0 \|'
	570	ELSE
	571	roben = 'p(nzt+1) = p(nzt) \|'
	572	ENDIF
	573
	574	IF ( ibc_uv_b == 0 ) THEN
	575	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
	576	ELSE
	577	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
	578	ENDIF
[132]	579	IF ( TRIM( bc_uv_t ) == 'dirichlet_0' ) THEN
	580	roben = TRIM( roben ) // ' uv(nzt+1) = 0 \|'
	581	ELSEIF ( ibc_uv_t == 0 ) THEN
[1]	582	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
	583	ELSE
	584	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
	585	ENDIF
	586
	587	IF ( ibc_pt_b == 0 ) THEN
	588	runten = TRIM( runten ) // ' pt(0) = pt_surface'
[102]	589	ELSEIF ( ibc_pt_b == 1 ) THEN
[1]	590	runten = TRIM( runten ) // ' pt(0) = pt(1)'
[102]	591	ELSEIF ( ibc_pt_b == 2 ) THEN
	592	runten = TRIM( runten ) // ' pt(0) = from coupled model'
[1]	593	ENDIF
	594	IF ( ibc_pt_t == 0 ) THEN
[19]	595	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
	596	ELSEIF( ibc_pt_t == 1 ) THEN
	597	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
	598	ELSEIF( ibc_pt_t == 2 ) THEN
	599	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
[667]	600
[1]	601	ENDIF
	602
	603	WRITE ( io, 300 ) runten, roben
	604
	605	IF ( .NOT. constant_diffusion ) THEN
	606	IF ( ibc_e_b == 1 ) THEN
	607	runten = 'e(0) = e(1)'
	608	ELSE
	609	runten = 'e(0) = e(1) = (u/0.1)*2'
	610	ENDIF
	611	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
	612
[97]	613	WRITE ( io, 301 ) 'e', runten, roben
[1]	614
	615	ENDIF
	616
[97]	617	IF ( ocean ) THEN
	618	runten = 'sa(0) = sa(1)'
	619	IF ( ibc_sa_t == 0 ) THEN
	620	roben = 'sa(nzt+1) = sa_surface'
[1]	621	ELSE
[97]	622	roben = 'sa(nzt+1) = sa(nzt)'
[1]	623	ENDIF
[97]	624	WRITE ( io, 301 ) 'sa', runten, roben
	625	ENDIF
[1]	626
[97]	627	IF ( humidity ) THEN
	628	IF ( ibc_q_b == 0 ) THEN
	629	runten = 'q(0) = q_surface'
	630	ELSE
	631	runten = 'q(0) = q(1)'
	632	ENDIF
	633	IF ( ibc_q_t == 0 ) THEN
	634	roben = 'q(nzt) = q_top'
	635	ELSE
	636	roben = 'q(nzt) = q(nzt-1) + dq/dz'
	637	ENDIF
	638	WRITE ( io, 301 ) 'q', runten, roben
	639	ENDIF
[1]	640
[97]	641	IF ( passive_scalar ) THEN
	642	IF ( ibc_q_b == 0 ) THEN
	643	runten = 's(0) = s_surface'
	644	ELSE
	645	runten = 's(0) = s(1)'
	646	ENDIF
	647	IF ( ibc_q_t == 0 ) THEN
	648	roben = 's(nzt) = s_top'
	649	ELSE
	650	roben = 's(nzt) = s(nzt-1) + ds/dz'
	651	ENDIF
	652	WRITE ( io, 301 ) 's', runten, roben
[1]	653	ENDIF
	654
	655	IF ( use_surface_fluxes ) THEN
	656	WRITE ( io, 303 )
	657	IF ( constant_heatflux ) THEN
	658	WRITE ( io, 306 ) surface_heatflux
	659	IF ( random_heatflux ) WRITE ( io, 307 )
	660	ENDIF
[75]	661	IF ( humidity .AND. constant_waterflux ) THEN
[1]	662	WRITE ( io, 311 ) surface_waterflux
	663	ENDIF
	664	IF ( passive_scalar .AND. constant_waterflux ) THEN
	665	WRITE ( io, 313 ) surface_waterflux
	666	ENDIF
	667	ENDIF
	668
[19]	669	IF ( use_top_fluxes ) THEN
	670	WRITE ( io, 304 )
[102]	671	IF ( coupling_mode == 'uncoupled' ) THEN
[151]	672	WRITE ( io, 320 ) top_momentumflux_u, top_momentumflux_v
[102]	673	IF ( constant_top_heatflux ) THEN
	674	WRITE ( io, 306 ) top_heatflux
	675	ENDIF
	676	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	677	WRITE ( io, 316 )
[19]	678	ENDIF
[97]	679	IF ( ocean .AND. constant_top_salinityflux ) THEN
	680	WRITE ( io, 309 ) top_salinityflux
	681	ENDIF
[75]	682	IF ( humidity .OR. passive_scalar ) THEN
[19]	683	WRITE ( io, 315 )
	684	ENDIF
	685	ENDIF
	686
[1]	687	IF ( prandtl_layer ) THEN
[978]	688	WRITE ( io, 305 ) (zu(1)-zu(0)), roughness_length, &
	689	z0h_factor*roughness_length, kappa, &
[94]	690	rif_min, rif_max
[1]	691	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
[75]	692	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
[1]	693	WRITE ( io, 312 )
	694	ENDIF
	695	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
	696	WRITE ( io, 314 )
	697	ENDIF
	698	ELSE
	699	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
	700	WRITE ( io, 310 ) rif_min, rif_max
	701	ENDIF
	702	ENDIF
	703
	704	WRITE ( io, 317 ) bc_lr, bc_ns
[707]	705	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
[978]	706	WRITE ( io, 318 ) pt_damping_width, pt_damping_factor
[151]	707	IF ( turbulent_inflow ) THEN
	708	WRITE ( io, 319 ) recycling_width, recycling_plane, &
	709	inflow_damping_height, inflow_damping_width
	710	ENDIF
[1]	711	ENDIF
	712
	713	!
	714	!-- Listing of 1D-profiles
[151]	715	WRITE ( io, 325 ) dt_dopr_listing
[1]	716	IF ( averaging_interval_pr /= 0.0 ) THEN
[151]	717	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
[1]	718	ENDIF
	719
	720	!
	721	!-- DATA output
	722	WRITE ( io, 330 )
	723	IF ( averaging_interval_pr /= 0.0 ) THEN
[151]	724	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
[1]	725	ENDIF
	726
	727	!
	728	!-- 1D-profiles
[346]	729	dopr_chr = 'Profile:'
[1]	730	IF ( dopr_n /= 0 ) THEN
	731	WRITE ( io, 331 )
	732
	733	output_format = ''
	734	IF ( netcdf_output ) THEN
[1031]	735	output_format = output_format_netcdf
[1]	736	ENDIF
[292]	737	WRITE ( io, 344 ) output_format
[1]	738
	739	DO i = 1, dopr_n
	740	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
	741	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
	742	WRITE ( io, 332 ) dopr_chr
	743	dopr_chr = ' :'
	744	ENDIF
	745	ENDDO
	746
	747	IF ( dopr_chr /= '' ) THEN
	748	WRITE ( io, 332 ) dopr_chr
	749	ENDIF
	750	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
	751	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
	752	ENDIF
	753
	754	!
	755	!-- 2D-arrays
	756	DO av = 0, 1
	757
	758	i = 1
	759	do2d_xy = ''
	760	do2d_xz = ''
	761	do2d_yz = ''
	762	DO WHILE ( do2d(av,i) /= ' ' )
	763
	764	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
	765	do2d_mode = do2d(av,i)(l-1:l)
	766
	767	SELECT CASE ( do2d_mode )
	768	CASE ( 'xy' )
	769	ll = LEN_TRIM( do2d_xy )
	770	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	771	CASE ( 'xz' )
	772	ll = LEN_TRIM( do2d_xz )
	773	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	774	CASE ( 'yz' )
	775	ll = LEN_TRIM( do2d_yz )
	776	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	777	END SELECT
	778
	779	i = i + 1
	780
	781	ENDDO
	782
	783	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
	784	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
	785	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
	786	( netcdf_output .OR. iso2d_output ) ) THEN
	787
	788	IF ( av == 0 ) THEN
	789	WRITE ( io, 334 ) ''
	790	ELSE
	791	WRITE ( io, 334 ) '(time-averaged)'
	792	ENDIF
	793
	794	IF ( do2d_at_begin ) THEN
	795	begin_chr = 'and at the start'
	796	ELSE
	797	begin_chr = ''
	798	ENDIF
	799
	800	output_format = ''
	801	IF ( netcdf_output ) THEN
[1031]	802	output_format = output_format_netcdf
[1]	803	ENDIF
	804	IF ( iso2d_output ) THEN
	805	IF ( netcdf_output ) THEN
[1031]	806	output_format = TRIM( output_format_netcdf ) // ' and iso2d'
[1]	807	ELSE
	808	output_format = 'iso2d'
	809	ENDIF
	810	ENDIF
[292]	811	WRITE ( io, 344 ) output_format
[1]	812
	813	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
	814	i = 1
	815	slices = '/'
	816	coordinates = '/'
	817	!
	818	!-- Building strings with index and coordinate informations of the
	819	!-- slices
	820	DO WHILE ( section(i,1) /= -9999 )
	821
	822	WRITE (section_chr,'(I5)') section(i,1)
	823	section_chr = ADJUSTL( section_chr )
	824	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	825
[206]	826	IF ( section(i,1) == -1 ) THEN
	827	WRITE (coor_chr,'(F10.1)') -1.0
	828	ELSE
	829	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
	830	ENDIF
[1]	831	coor_chr = ADJUSTL( coor_chr )
	832	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	833
	834	i = i + 1
	835	ENDDO
	836	IF ( av == 0 ) THEN
	837	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
	838	TRIM( begin_chr ), 'k', TRIM( slices ), &
	839	TRIM( coordinates )
	840	IF ( skip_time_do2d_xy /= 0.0 ) THEN
	841	WRITE ( io, 339 ) skip_time_do2d_xy
	842	ENDIF
	843	ELSE
	844	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
	845	TRIM( begin_chr ), averaging_interval, &
	846	dt_averaging_input, 'k', TRIM( slices ), &
	847	TRIM( coordinates )
	848	IF ( skip_time_data_output_av /= 0.0 ) THEN
	849	WRITE ( io, 339 ) skip_time_data_output_av
	850	ENDIF
	851	ENDIF
	852
	853	ENDIF
	854
	855	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
	856	i = 1
	857	slices = '/'
	858	coordinates = '/'
	859	!
	860	!-- Building strings with index and coordinate informations of the
	861	!-- slices
	862	DO WHILE ( section(i,2) /= -9999 )
	863
	864	WRITE (section_chr,'(I5)') section(i,2)
	865	section_chr = ADJUSTL( section_chr )
	866	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	867
	868	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
	869	coor_chr = ADJUSTL( coor_chr )
	870	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	871
	872	i = i + 1
	873	ENDDO
	874	IF ( av == 0 ) THEN
	875	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
	876	TRIM( begin_chr ), 'j', TRIM( slices ), &
	877	TRIM( coordinates )
	878	IF ( skip_time_do2d_xz /= 0.0 ) THEN
	879	WRITE ( io, 339 ) skip_time_do2d_xz
	880	ENDIF
	881	ELSE
	882	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
	883	TRIM( begin_chr ), averaging_interval, &
	884	dt_averaging_input, 'j', TRIM( slices ), &
	885	TRIM( coordinates )
	886	IF ( skip_time_data_output_av /= 0.0 ) THEN
	887	WRITE ( io, 339 ) skip_time_data_output_av
	888	ENDIF
	889	ENDIF
	890	ENDIF
	891
	892	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
	893	i = 1
	894	slices = '/'
	895	coordinates = '/'
	896	!
	897	!-- Building strings with index and coordinate informations of the
	898	!-- slices
	899	DO WHILE ( section(i,3) /= -9999 )
	900
	901	WRITE (section_chr,'(I5)') section(i,3)
	902	section_chr = ADJUSTL( section_chr )
	903	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	904
	905	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
	906	coor_chr = ADJUSTL( coor_chr )
	907	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	908
	909	i = i + 1
	910	ENDDO
	911	IF ( av == 0 ) THEN
	912	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
	913	TRIM( begin_chr ), 'i', TRIM( slices ), &
	914	TRIM( coordinates )
	915	IF ( skip_time_do2d_yz /= 0.0 ) THEN
	916	WRITE ( io, 339 ) skip_time_do2d_yz
	917	ENDIF
	918	ELSE
	919	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
	920	TRIM( begin_chr ), averaging_interval, &
	921	dt_averaging_input, 'i', TRIM( slices ), &
	922	TRIM( coordinates )
	923	IF ( skip_time_data_output_av /= 0.0 ) THEN
	924	WRITE ( io, 339 ) skip_time_data_output_av
	925	ENDIF
	926	ENDIF
	927	ENDIF
	928
	929	ENDIF
	930
	931	ENDDO
	932
	933	!
	934	!-- 3d-arrays
	935	DO av = 0, 1
	936
	937	i = 1
	938	do3d_chr = ''
	939	DO WHILE ( do3d(av,i) /= ' ' )
	940
	941	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
	942	i = i + 1
	943
	944	ENDDO
	945
	946	IF ( do3d_chr /= '' ) THEN
	947	IF ( av == 0 ) THEN
	948	WRITE ( io, 336 ) ''
	949	ELSE
	950	WRITE ( io, 336 ) '(time-averaged)'
	951	ENDIF
	952
	953	output_format = ''
	954	IF ( netcdf_output ) THEN
[1031]	955	output_format = output_format_netcdf
[1]	956	ENDIF
	957	IF ( avs_output ) THEN
	958	IF ( netcdf_output ) THEN
[1031]	959	output_format = TRIM( output_format_netcdf ) // ' and avs'
[1]	960	ELSE
	961	output_format = 'avs'
	962	ENDIF
	963	ENDIF
[292]	964	WRITE ( io, 344 ) output_format
[1]	965
	966	IF ( do3d_at_begin ) THEN
	967	begin_chr = 'and at the start'
	968	ELSE
	969	begin_chr = ''
	970	ENDIF
	971	IF ( av == 0 ) THEN
	972	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
	973	zu(nz_do3d), nz_do3d
	974	ELSE
	975	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
	976	TRIM( begin_chr ), averaging_interval, &
	977	dt_averaging_input, zu(nz_do3d), nz_do3d
	978	ENDIF
	979
	980	IF ( do3d_compress ) THEN
	981	do3d_chr = ''
	982	i = 1
	983	DO WHILE ( do3d(av,i) /= ' ' )
	984
	985	SELECT CASE ( do3d(av,i) )
	986	CASE ( 'u' )
	987	j = 1
	988	CASE ( 'v' )
	989	j = 2
	990	CASE ( 'w' )
	991	j = 3
	992	CASE ( 'p' )
	993	j = 4
	994	CASE ( 'pt' )
	995	j = 5
	996	END SELECT
	997	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
	998	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
	999	':' // prec // ','
	1000	i = i + 1
	1001
	1002	ENDDO
	1003	WRITE ( io, 338 ) do3d_chr
	1004
	1005	ENDIF
	1006
	1007	IF ( av == 0 ) THEN
	1008	IF ( skip_time_do3d /= 0.0 ) THEN
	1009	WRITE ( io, 339 ) skip_time_do3d
	1010	ENDIF
	1011	ELSE
	1012	IF ( skip_time_data_output_av /= 0.0 ) THEN
	1013	WRITE ( io, 339 ) skip_time_data_output_av
	1014	ENDIF
	1015	ENDIF
	1016
	1017	ENDIF
	1018
	1019	ENDDO
	1020
	1021	!
[410]	1022	!-- masked arrays
	1023	IF ( masks > 0 ) WRITE ( io, 345 ) &
	1024	mask_scale_x, mask_scale_y, mask_scale_z
	1025	DO mid = 1, masks
	1026	DO av = 0, 1
	1027
	1028	i = 1
	1029	domask_chr = ''
	1030	DO WHILE ( domask(mid,av,i) /= ' ' )
	1031	domask_chr = TRIM( domask_chr ) // ' ' // &
	1032	TRIM( domask(mid,av,i) ) // ','
	1033	i = i + 1
	1034	ENDDO
	1035
	1036	IF ( domask_chr /= '' ) THEN
	1037	IF ( av == 0 ) THEN
	1038	WRITE ( io, 346 ) '', mid
	1039	ELSE
	1040	WRITE ( io, 346 ) ' (time-averaged)', mid
	1041	ENDIF
	1042
[1031]	1043	output_format = ' '
[410]	1044	IF ( netcdf_output ) THEN
[1031]	1045	output_format = output_format_netcdf
[410]	1046	ENDIF
	1047	WRITE ( io, 344 ) output_format
	1048
	1049	IF ( av == 0 ) THEN
	1050	WRITE ( io, 347 ) domask_chr, dt_domask(mid)
	1051	ELSE
	1052	WRITE ( io, 348 ) domask_chr, dt_data_output_av, &
	1053	averaging_interval, dt_averaging_input
	1054	ENDIF
	1055
	1056	IF ( av == 0 ) THEN
	1057	IF ( skip_time_domask(mid) /= 0.0 ) THEN
	1058	WRITE ( io, 339 ) skip_time_domask(mid)
	1059	ENDIF
	1060	ELSE
	1061	IF ( skip_time_data_output_av /= 0.0 ) THEN
	1062	WRITE ( io, 339 ) skip_time_data_output_av
	1063	ENDIF
	1064	ENDIF
	1065	!
	1066	!-- output locations
	1067	DO dim = 1, 3
	1068	IF ( mask(mid,dim,1) >= 0.0 ) THEN
	1069	count = 0
	1070	DO WHILE ( mask(mid,dim,count+1) >= 0.0 )
	1071	count = count + 1
	1072	ENDDO
	1073	WRITE ( io, 349 ) dir(dim), dir(dim), mid, dir(dim), &
	1074	mask(mid,dim,:count)
	1075	ELSEIF ( mask_loop(mid,dim,1) < 0.0 .AND. &
	1076	mask_loop(mid,dim,2) < 0.0 .AND. &
	1077	mask_loop(mid,dim,3) == 0.0 ) THEN
	1078	WRITE ( io, 350 ) dir(dim), dir(dim)
	1079	ELSEIF ( mask_loop(mid,dim,3) == 0.0 ) THEN
	1080	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
	1081	mask_loop(mid,dim,1:2)
	1082	ELSE
	1083	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
	1084	mask_loop(mid,dim,1:3)
	1085	ENDIF
	1086	ENDDO
	1087	ENDIF
	1088
	1089	ENDDO
	1090	ENDDO
	1091
	1092	!
[1]	1093	!-- Timeseries
	1094	IF ( dt_dots /= 9999999.9 ) THEN
	1095	WRITE ( io, 340 )
	1096
	1097	output_format = ''
	1098	IF ( netcdf_output ) THEN
[1031]	1099	output_format = output_format_netcdf
[1]	1100	ENDIF
[292]	1101	WRITE ( io, 344 ) output_format
[1]	1102	WRITE ( io, 341 ) dt_dots
	1103	ENDIF
	1104
	1105	#if defined( __dvrp_graphics )
	1106	!
	1107	!-- Dvrp-output
	1108	IF ( dt_dvrp /= 9999999.9 ) THEN
	1109	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
	1110	TRIM( dvrp_username ), TRIM( dvrp_directory )
	1111	i = 1
	1112	l = 0
[336]	1113	m = 0
[1]	1114	DO WHILE ( mode_dvrp(i) /= ' ' )
	1115	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
[130]	1116	READ ( mode_dvrp(i), '(10X,I2)' ) j
[1]	1117	l = l + 1
	1118	IF ( do3d(0,j) /= ' ' ) THEN
[336]	1119	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l), &
	1120	isosurface_color(:,l)
[1]	1121	ENDIF
	1122	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
[130]	1123	READ ( mode_dvrp(i), '(6X,I2)' ) j
[336]	1124	m = m + 1
	1125	IF ( do2d(0,j) /= ' ' ) THEN
	1126	WRITE ( io, 362 ) TRIM( do2d(0,j) ), &
	1127	slicer_range_limits_dvrp(:,m)
	1128	ENDIF
[1]	1129	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
[336]	1130	WRITE ( io, 363 ) dvrp_psize
	1131	IF ( particle_dvrpsize /= 'none' ) THEN
	1132	WRITE ( io, 364 ) 'size', TRIM( particle_dvrpsize ), &
	1133	dvrpsize_interval
	1134	ENDIF
	1135	IF ( particle_color /= 'none' ) THEN
	1136	WRITE ( io, 364 ) 'color', TRIM( particle_color ), &
	1137	color_interval
	1138	ENDIF
[1]	1139	ENDIF
	1140	i = i + 1
	1141	ENDDO
[237]	1142
[336]	1143	WRITE ( io, 365 ) groundplate_color, superelevation_x, &
	1144	superelevation_y, superelevation, clip_dvrp_l, &
	1145	clip_dvrp_r, clip_dvrp_s, clip_dvrp_n
	1146
	1147	IF ( TRIM( topography ) /= 'flat' ) THEN
	1148	WRITE ( io, 366 ) topography_color
	1149	IF ( cluster_size > 1 ) THEN
	1150	WRITE ( io, 367 ) cluster_size
	1151	ENDIF
[237]	1152	ENDIF
	1153
[1]	1154	ENDIF
	1155	#endif
	1156
	1157	#if defined( __spectra )
	1158	!
	1159	!-- Spectra output
	1160	IF ( dt_dosp /= 9999999.9 ) THEN
	1161	WRITE ( io, 370 )
	1162
[1031]	1163	output_format = ' '
[1]	1164	IF ( netcdf_output ) THEN
[1031]	1165	output_format = output_format_netcdf
[1]	1166	ENDIF
[292]	1167	WRITE ( io, 344 ) output_format
[1]	1168	WRITE ( io, 371 ) dt_dosp
	1169	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
	1170	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
	1171	( spectra_direction(i), i = 1,10 ), &
[189]	1172	( comp_spectra_level(i), i = 1,100 ), &
	1173	( plot_spectra_level(i), i = 1,100 ), &
[1]	1174	averaging_interval_sp, dt_averaging_input_pr
	1175	ENDIF
	1176	#endif
	1177
	1178	WRITE ( io, 99 )
	1179
	1180	!
	1181	!-- Physical quantities
	1182	WRITE ( io, 400 )
	1183
	1184	!
	1185	!-- Geostrophic parameters
	1186	WRITE ( io, 410 ) omega, phi, f, fs
	1187
	1188	!
	1189	!-- Other quantities
	1190	WRITE ( io, 411 ) g
[97]	1191	IF ( use_reference ) THEN
	1192	IF ( ocean ) THEN
	1193	WRITE ( io, 412 ) prho_reference
	1194	ELSE
	1195	WRITE ( io, 413 ) pt_reference
	1196	ENDIF
	1197	ENDIF
[1]	1198
	1199	!
	1200	!-- Cloud physics parameters
	1201	IF ( cloud_physics ) THEN
[57]	1202	WRITE ( io, 415 )
	1203	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
[1]	1204	ENDIF
	1205
	1206	!-- Profile of the geostrophic wind (component ug)
	1207	!-- Building output strings
	1208	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
	1209	gradients = '------'
	1210	slices = ' 0'
	1211	coordinates = ' 0.0'
	1212	i = 1
	1213	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
	1214
[167]	1215	WRITE (coor_chr,'(F6.2,1X)') ug(ug_vertical_gradient_level_ind(i))
[1]	1216	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
	1217
[167]	1218	WRITE (coor_chr,'(F6.2,1X)') ug_vertical_gradient(i)
[1]	1219	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1220
[167]	1221	WRITE (coor_chr,'(I6,1X)') ug_vertical_gradient_level_ind(i)
[1]	1222	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1223
[167]	1224	WRITE (coor_chr,'(F6.1,1X)') ug_vertical_gradient_level(i)
[1]	1225	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1226
[430]	1227	IF ( i == 10 ) THEN
	1228	EXIT
	1229	ELSE
	1230	i = i + 1
	1231	ENDIF
	1232
[1]	1233	ENDDO
	1234
	1235	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
	1236	TRIM( gradients ), TRIM( slices )
	1237
	1238	!-- Profile of the geostrophic wind (component vg)
	1239	!-- Building output strings
	1240	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
	1241	gradients = '------'
	1242	slices = ' 0'
	1243	coordinates = ' 0.0'
	1244	i = 1
	1245	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
	1246
[167]	1247	WRITE (coor_chr,'(F6.2,1X)') vg(vg_vertical_gradient_level_ind(i))
[1]	1248	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
	1249
[167]	1250	WRITE (coor_chr,'(F6.2,1X)') vg_vertical_gradient(i)
[1]	1251	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1252
[167]	1253	WRITE (coor_chr,'(I6,1X)') vg_vertical_gradient_level_ind(i)
[1]	1254	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1255
[167]	1256	WRITE (coor_chr,'(F6.1,1X)') vg_vertical_gradient_level(i)
[1]	1257	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1258
[430]	1259	IF ( i == 10 ) THEN
	1260	EXIT
	1261	ELSE
	1262	i = i + 1
	1263	ENDIF
	1264
[1]	1265	ENDDO
	1266
	1267	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
	1268	TRIM( gradients ), TRIM( slices )
	1269
	1270	!
[767]	1271	!-- Initial wind profiles
	1272	IF ( u_profile(1) /= 9999999.9 ) WRITE ( io, 427 )
	1273
	1274	!
[1]	1275	!-- Initial temperature profile
	1276	!-- Building output strings, starting with surface temperature
	1277	WRITE ( temperatures, '(F6.2)' ) pt_surface
	1278	gradients = '------'
	1279	slices = ' 0'
	1280	coordinates = ' 0.0'
	1281	i = 1
	1282	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
	1283
[94]	1284	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
	1285	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
[1]	1286
[94]	1287	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
	1288	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
[1]	1289
[94]	1290	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
	1291	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
[1]	1292
[94]	1293	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
	1294	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
[1]	1295
[430]	1296	IF ( i == 10 ) THEN
	1297	EXIT
	1298	ELSE
	1299	i = i + 1
	1300	ENDIF
	1301
[1]	1302	ENDDO
	1303
	1304	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
	1305	TRIM( gradients ), TRIM( slices )
	1306
	1307	!
	1308	!-- Initial humidity profile
	1309	!-- Building output strings, starting with surface humidity
[75]	1310	IF ( humidity .OR. passive_scalar ) THEN
[1]	1311	WRITE ( temperatures, '(E8.1)' ) q_surface
	1312	gradients = '--------'
	1313	slices = ' 0'
	1314	coordinates = ' 0.0'
	1315	i = 1
	1316	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
	1317
	1318	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
	1319	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1320
	1321	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
	1322	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1323
	1324	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
	1325	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1326
	1327	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
	1328	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1329
[430]	1330	IF ( i == 10 ) THEN
	1331	EXIT
	1332	ELSE
	1333	i = i + 1
	1334	ENDIF
	1335
[1]	1336	ENDDO
	1337
[75]	1338	IF ( humidity ) THEN
[1]	1339	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
	1340	TRIM( gradients ), TRIM( slices )
	1341	ELSE
	1342	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
	1343	TRIM( gradients ), TRIM( slices )
	1344	ENDIF
	1345	ENDIF
	1346
	1347	!
[97]	1348	!-- Initial salinity profile
	1349	!-- Building output strings, starting with surface salinity
	1350	IF ( ocean ) THEN
	1351	WRITE ( temperatures, '(F6.2)' ) sa_surface
	1352	gradients = '------'
	1353	slices = ' 0'
	1354	coordinates = ' 0.0'
	1355	i = 1
	1356	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
	1357
	1358	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
	1359	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1360
	1361	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
	1362	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1363
	1364	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
	1365	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1366
	1367	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
	1368	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1369
[430]	1370	IF ( i == 10 ) THEN
	1371	EXIT
	1372	ELSE
	1373	i = i + 1
	1374	ENDIF
	1375
[97]	1376	ENDDO
	1377
	1378	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
	1379	TRIM( gradients ), TRIM( slices )
	1380	ENDIF
	1381
	1382	!
[411]	1383	!-- Profile for the large scale vertial velocity
	1384	!-- Building output strings, starting with surface value
	1385	IF ( large_scale_subsidence ) THEN
	1386	temperatures = ' 0.0'
	1387	gradients = '------'
	1388	slices = ' 0'
	1389	coordinates = ' 0.0'
	1390	i = 1
[580]	1391	DO WHILE ( subs_vertical_gradient_level_i(i) /= -9999 )
[411]	1392
	1393	WRITE (coor_chr,'(E10.2,7X)') &
[580]	1394	w_subs(subs_vertical_gradient_level_i(i))
[411]	1395	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1396
[580]	1397	WRITE (coor_chr,'(E10.2,7X)') subs_vertical_gradient(i)
[411]	1398	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1399
[580]	1400	WRITE (coor_chr,'(I10,7X)') subs_vertical_gradient_level_i(i)
[411]	1401	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1402
[580]	1403	WRITE (coor_chr,'(F10.2,7X)') subs_vertical_gradient_level(i)
[411]	1404	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1405
[430]	1406	IF ( i == 10 ) THEN
	1407	EXIT
	1408	ELSE
	1409	i = i + 1
	1410	ENDIF
	1411
[411]	1412	ENDDO
	1413
	1414	WRITE ( io, 426 ) TRIM( coordinates ), TRIM( temperatures ), &
	1415	TRIM( gradients ), TRIM( slices )
	1416	ENDIF
	1417
	1418	!
[824]	1419	!-- Cloud physcis parameters / quantities / numerical methods
	1420	WRITE ( io, 430 )
	1421	IF ( humidity .AND. .NOT. cloud_physics .AND. .NOT. cloud_droplets) THEN
	1422	WRITE ( io, 431 )
	1423	ELSEIF ( humidity .AND. cloud_physics ) THEN
	1424	WRITE ( io, 432 )
	1425	IF ( radiation ) WRITE ( io, 132 )
	1426	IF ( precipitation ) WRITE ( io, 133 )
	1427	ELSEIF ( humidity .AND. cloud_droplets ) THEN
	1428	WRITE ( io, 433 )
	1429	IF ( curvature_solution_effects ) WRITE ( io, 434 )
[825]	1430	IF ( collision_kernel /= 'none' ) THEN
	1431	WRITE ( io, 435 ) TRIM( collision_kernel )
[828]	1432	IF ( collision_kernel(6:9) == 'fast' ) THEN
	1433	WRITE ( io, 436 ) radius_classes, dissipation_classes
	1434	ENDIF
[825]	1435	ELSE
[828]	1436	WRITE ( io, 437 )
[825]	1437	ENDIF
[824]	1438	ENDIF
	1439
	1440	!
[1]	1441	!-- LES / turbulence parameters
	1442	WRITE ( io, 450 )
	1443
	1444	!--
	1445	! ... LES-constants used must still be added here
	1446	!--
	1447	IF ( constant_diffusion ) THEN
	1448	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
	1449	prandtl_number
	1450	ENDIF
	1451	IF ( .NOT. constant_diffusion) THEN
[108]	1452	IF ( e_init > 0.0 ) WRITE ( io, 455 ) e_init
[1]	1453	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
	1454	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
	1455	ENDIF
	1456
	1457	!
	1458	!-- Special actions during the run
	1459	WRITE ( io, 470 )
	1460	IF ( create_disturbances ) THEN
	1461	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
	1462	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
	1463	zu(disturbance_level_ind_t), disturbance_level_ind_t
[707]	1464	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
[1]	1465	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
	1466	ELSE
	1467	WRITE ( io, 473 ) disturbance_energy_limit
	1468	ENDIF
	1469	WRITE ( io, 474 ) TRIM( random_generator )
	1470	ENDIF
	1471	IF ( pt_surface_initial_change /= 0.0 ) THEN
	1472	WRITE ( io, 475 ) pt_surface_initial_change
	1473	ENDIF
[75]	1474	IF ( humidity .AND. q_surface_initial_change /= 0.0 ) THEN
[1]	1475	WRITE ( io, 476 ) q_surface_initial_change
	1476	ENDIF
	1477	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
	1478	WRITE ( io, 477 ) q_surface_initial_change
	1479	ENDIF
	1480
[60]	1481	IF ( particle_advection ) THEN
[1]	1482	!
[60]	1483	!-- Particle attributes
	1484	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
	1485	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
[117]	1486	end_time_prel, dt_sort_particles
[60]	1487	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
	1488	IF ( random_start_position ) WRITE ( io, 481 )
	1489	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
	1490	WRITE ( io, 495 ) total_number_of_particles
[824]	1491	IF ( use_particle_tails .AND. maximum_number_of_tailpoints /= 0 ) THEN
[60]	1492	WRITE ( io, 483 ) maximum_number_of_tailpoints
	1493	IF ( minimum_tailpoint_distance /= 0 ) THEN
	1494	WRITE ( io, 484 ) total_number_of_tails, &
	1495	minimum_tailpoint_distance, &
	1496	maximum_tailpoint_age
	1497	ENDIF
[1]	1498	ENDIF
[60]	1499	IF ( dt_write_particle_data /= 9999999.9 ) THEN
	1500	WRITE ( io, 485 ) dt_write_particle_data
[1031]	1501	output_format = ' '
[60]	1502	IF ( netcdf_output ) THEN
[493]	1503	IF ( netcdf_data_format > 1 ) THEN
[60]	1504	output_format = 'netcdf (64 bit offset) and binary'
	1505	ELSE
	1506	output_format = 'netcdf and binary'
	1507	ENDIF
[1]	1508	ELSE
[60]	1509	output_format = 'binary'
[1]	1510	ENDIF
[292]	1511	WRITE ( io, 344 ) output_format
[1]	1512	ENDIF
[60]	1513	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
	1514	IF ( write_particle_statistics ) WRITE ( io, 486 )
[1]	1515
[60]	1516	WRITE ( io, 487 ) number_of_particle_groups
[1]	1517
[60]	1518	DO i = 1, number_of_particle_groups
	1519	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
	1520	WRITE ( io, 490 ) i, 0.0
	1521	WRITE ( io, 492 )
[1]	1522	ELSE
[60]	1523	WRITE ( io, 490 ) i, radius(i)
	1524	IF ( density_ratio(i) /= 0.0 ) THEN
	1525	WRITE ( io, 491 ) density_ratio(i)
	1526	ELSE
	1527	WRITE ( io, 492 )
	1528	ENDIF
[1]	1529	ENDIF
[60]	1530	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
	1531	pdx(i), pdy(i), pdz(i)
[336]	1532	IF ( .NOT. vertical_particle_advection(i) ) WRITE ( io, 482 )
[60]	1533	ENDDO
[1]	1534
[60]	1535	ENDIF
[1]	1536
[60]	1537
[1]	1538	!
	1539	!-- Parameters of 1D-model
	1540	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
	1541	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
	1542	mixing_length_1d, dissipation_1d
	1543	IF ( damp_level_ind_1d /= nzt+1 ) THEN
	1544	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
	1545	ENDIF
	1546	ENDIF
	1547
	1548	!
	1549	!-- User-defined informations
	1550	CALL user_header( io )
	1551
	1552	WRITE ( io, 99 )
	1553
	1554	!
	1555	!-- Write buffer contents to disc immediately
[82]	1556	CALL local_flush( io )
[1]	1557
	1558	!
	1559	!-- Here the FORMATs start
	1560
	1561	99 FORMAT (1X,78('-'))
[200]	1562	100 FORMAT (/1X,'***************************',9X,42('-')/ &
	1563	1X,'* ',A,' *',9X,A/ &
	1564	1X,'***************************',9X,42('-'))
[291]	1565	101 FORMAT (37X,'coupled run using MPI-',I1,': ',A/ &
[102]	1566	37X,42('-'))
[200]	1567	102 FORMAT (/' Date: ',A8,9X,'Run: ',A20/ &
	1568	' Time: ',A8,9X,'Run-No.: ',I2.2/ &
	1569	' Run on host: ',A10)
[1]	1570	#if defined( __parallel )
[200]	1571	103 FORMAT (' Number of PEs:',8X,I5,9X,'Processor grid (x,y): (',I3,',',I3, &
[1]	1572	')',1X,A)
[200]	1573	104 FORMAT (' Number of PEs:',8X,I5,9X,'Tasks:',I4,' threads per task:',I4/ &
[1]	1574	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
[102]	1575	105 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
	1576	106 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
[1]	1577	37X,'because the job is running on an SMP-cluster')
[102]	1578	107 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
[759]	1579	108 FORMAT (37X,'Max. # of parallel I/O streams is ',I5)
[1]	1580	#endif
	1581	110 FORMAT (/' Numerical Schemes:'/ &
	1582	' -----------------'/)
	1583	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
	1584	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
	1585	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
	1586	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
	1587	' or Upstream')
	1588	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
	1589	' or Upstream')
	1590	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
	1591	119 FORMAT (' --> Galilei-Transform applied to horizontal advection', &
	1592	' Translation velocity = ',A/ &
	1593	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
	1594	122 FORMAT (' --> Time differencing scheme: ',A)
[108]	1595	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
[1]	1596	' maximum damping coefficient: ',F5.3, ' 1/s')
	1597	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
	1598	130 FORMAT (' --> Additional prognostic equation for the total water content')
[940]	1599	131 FORMAT (' --> No pt-equation solved. Neutral stratification with pt = ', &
	1600	F6.2, ' K assumed')
[824]	1601	132 FORMAT (' Parameterization of long-wave radiation processes via'/ &
[1]	1602	' effective emissivity scheme')
[824]	1603	133 FORMAT (' Precipitation parameterization via Kessler-Scheme')
[1]	1604	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
	1605	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
	1606	A,'-cycle)'/ &
	1607	' number of grid levels: ',I2/ &
	1608	' Gauss-Seidel red/black iterations: ',I2)
	1609	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1610	I3,')')
	1611	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
	1612	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1613	I3,')'/ &
	1614	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
	1615	I3,')')
	1616	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
[63]	1617	139 FORMAT (' --> Loop optimization method: ',A)
[1]	1618	140 FORMAT (' maximum residual allowed: ',E10.3)
	1619	141 FORMAT (' fixed number of multigrid cycles: ',I4)
	1620	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
	1621	'step')
[87]	1622	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
	1623	'kinetic energy')
[927]	1624	144 FORMAT (' masking method is used')
[1]	1625	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
[241]	1626	'conserved'/ &
	1627	' using the ',A,' mode')
	1628	151 FORMAT (' with u_bulk = ',F7.3,' m/s and v_bulk = ',F7.3,' m/s')
[306]	1629	152 FORMAT (' --> External pressure gradient directly prescribed by the user:',&
	1630	/' ',2(1X,E12.5),'Pa/m in x/y direction', &
	1631	/' starting from dp_level_b =', F8.3, 'm', A /)
[411]	1632	153 FORMAT (' --> Large-scale vertical motion is used in the ', &
	1633	'prognostic equation for')
	1634	154 FORMAT (' the potential temperature')
[1]	1635	200 FORMAT (//' Run time and time step information:'/ &
	1636	' ----------------------------------'/)
	1637	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
	1638	' CFL-factor: ',F4.2)
	1639	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
	1640	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
	1641	' End time: ',F9.3,' s')
	1642	204 FORMAT ( A,F9.3,' s')
	1643	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
	1644	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
	1645	' CPU-time used: ',F9.3,' s per timestep: ', &
	1646	' ',F9.3,' s'/ &
	1647	' per second of simulated tim', &
	1648	'e: ',F9.3,' s')
[291]	1649	207 FORMAT ( A/' Coupling start time:',F9.3,' s')
[1]	1650	250 FORMAT (//' Computational grid and domain size:'/ &
	1651	' ----------------------------------'// &
	1652	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
	1653	' m dz = ',F7.3,' m'/ &
	1654	' Domain size: x = ',F10.3,' m y = ',F10.3, &
	1655	' m z(u) = ',F10.3,' m'/)
	1656	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
	1657	' factor: ',F5.3/ &
	1658	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
	1659	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
	1660	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
	1661	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
	1662	' degrees')
	1663	270 FORMAT (//' Topography informations:'/ &
	1664	' -----------------------'// &
	1665	1X,'Topography: ',A)
	1666	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
	1667	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
	1668	' / ',I4)
[240]	1669	272 FORMAT ( ' Single quasi-2D street canyon of infinite length in ',A, &
	1670	' direction' / &
	1671	' Canyon height: ', F6.2, 'm, ch = ', I4, '.' / &
	1672	' Canyon position (',A,'-walls): cxl = ', I4,', cxr = ', I4, '.')
[256]	1673	278 FORMAT (' Topography grid definition convention:'/ &
	1674	' cell edge (staggered grid points'/ &
	1675	' (u in x-direction, v in y-direction))' /)
	1676	279 FORMAT (' Topography grid definition convention:'/ &
	1677	' cell center (scalar grid points)' /)
[138]	1678	280 FORMAT (//' Vegetation canopy (drag) model:'/ &
	1679	' ------------------------------'// &
	1680	' Canopy mode: ', A / &
	1681	' Canopy top: ',I4 / &
	1682	' Leaf drag coefficient: ',F6.2 /)
[153]	1683	281 FORMAT (/ ' Scalar_exchange_coefficient: ',F6.2 / &
	1684	' Scalar concentration at leaf surfaces in kg/m**3: ',F6.2 /)
	1685	282 FORMAT (' Predefined constant heatflux at the top of the vegetation: ',F6.2,' K m/s')
	1686	283 FORMAT (/ ' Characteristic levels of the leaf area density:'// &
[138]	1687	' Height: ',A,' m'/ &
	1688	' Leaf area density: ',A,' m2/m3'/ &
	1689	' Gradient: ',A,' m2/m4'/ &
	1690	' Gridpoint: ',A)
	1691
[1]	1692	300 FORMAT (//' Boundary conditions:'/ &
	1693	' -------------------'// &
	1694	' p uv ', &
	1695	' pt'// &
	1696	' B. bound.: ',A/ &
	1697	' T. bound.: ',A)
[97]	1698	301 FORMAT (/' ',A// &
[1]	1699	' B. bound.: ',A/ &
	1700	' T. bound.: ',A)
[19]	1701	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
	1702	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
	1703	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
	1704	'computational u,v-level:'// &
[978]	1705	' zp = ',F6.2,' m z0 = ',F6.4,' m z0h = ',F7.5,&
	1706	' m kappa = ',F4.2/ &
[1]	1707	' Rif value range: ',F6.2,' <= rif <=',F6.2)
[97]	1708	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
[1]	1709	307 FORMAT (' Heatflux has a random normal distribution')
	1710	308 FORMAT (' Predefined surface temperature')
[97]	1711	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
[1]	1712	310 FORMAT (//' 1D-Model:'// &
	1713	' Rif value range: ',F6.2,' <= rif <=',F6.2)
	1714	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
	1715	312 FORMAT (' Predefined surface humidity')
	1716	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
	1717	314 FORMAT (' Predefined scalar value at the surface')
[19]	1718	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
[102]	1719	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
	1720	'atmosphere model')
[1]	1721	317 FORMAT (//' Lateral boundaries:'/ &
	1722	' left/right: ',A/ &
	1723	' north/south: ',A)
[978]	1724	318 FORMAT (/' pt damping layer width = ',F7.2,' m, pt ', &
	1725	'damping factor = ',F6.4)
[151]	1726	319 FORMAT (' turbulence recycling at inflow switched on'/ &
	1727	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
	1728	' inflow damping height: ',F6.1,' m width: ',F6.1,' m')
	1729	320 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
[103]	1730	' v: ',F9.6,' m2/s2')
[151]	1731	325 FORMAT (//' List output:'/ &
[1]	1732	' -----------'// &
	1733	' 1D-Profiles:'/ &
	1734	' Output every ',F8.2,' s')
[151]	1735	326 FORMAT (' Time averaged over ',F8.2,' s'/ &
[1]	1736	' Averaging input every ',F8.2,' s')
	1737	330 FORMAT (//' Data output:'/ &
	1738	' -----------'/)
	1739	331 FORMAT (/' 1D-Profiles:')
	1740	332 FORMAT (/' ',A)
	1741	333 FORMAT (' Output every ',F8.2,' s',/ &
	1742	' Time averaged over ',F8.2,' s'/ &
	1743	' Averaging input every ',F8.2,' s')
	1744	334 FORMAT (/' 2D-Arrays',A,':')
	1745	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1746	' Output every ',F8.2,' s ',A/ &
	1747	' Cross sections at ',A1,' = ',A/ &
	1748	' scalar-coordinates: ',A,' m'/)
	1749	336 FORMAT (/' 3D-Arrays',A,':')
	1750	337 FORMAT (/' Arrays: ',A/ &
	1751	' Output every ',F8.2,' s ',A/ &
	1752	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
	1753	338 FORMAT (' Compressed data output'/ &
	1754	' Decimal precision: ',A/)
	1755	339 FORMAT (' No output during initial ',F8.2,' s')
	1756	340 FORMAT (/' Time series:')
	1757	341 FORMAT (' Output every ',F8.2,' s'/)
	1758	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1759	' Output every ',F8.2,' s ',A/ &
	1760	' Time averaged over ',F8.2,' s'/ &
	1761	' Averaging input every ',F8.2,' s'/ &
	1762	' Cross sections at ',A1,' = ',A/ &
	1763	' scalar-coordinates: ',A,' m'/)
	1764	343 FORMAT (/' Arrays: ',A/ &
	1765	' Output every ',F8.2,' s ',A/ &
	1766	' Time averaged over ',F8.2,' s'/ &
	1767	' Averaging input every ',F8.2,' s'/ &
	1768	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
[292]	1769	344 FORMAT (' Output format: ',A/)
[410]	1770	345 FORMAT (/' Scaling lengths for output locations of all subsequent mask IDs:',/ &
	1771	' mask_scale_x (in x-direction): ',F9.3, ' m',/ &
	1772	' mask_scale_y (in y-direction): ',F9.3, ' m',/ &
	1773	' mask_scale_z (in z-direction): ',F9.3, ' m' )
	1774	346 FORMAT (/' Masked data output',A,' for mask ID ',I2, ':')
	1775	347 FORMAT (' Variables: ',A/ &
	1776	' Output every ',F8.2,' s')
	1777	348 FORMAT (' Variables: ',A/ &
	1778	' Output every ',F8.2,' s'/ &
	1779	' Time averaged over ',F8.2,' s'/ &
	1780	' Averaging input every ',F8.2,' s')
	1781	349 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
	1782	'mask_scale_',A,' predefined by array mask_',I2.2,'_',A,':'/ &
	1783	13(' ',8(F8.2,',')/) )
	1784	350 FORMAT (/' Output locations in ',A,'-direction: ', &
	1785	'all gridpoints along ',A,'-direction (default).' )
	1786	351 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
	1787	'mask_scale_',A,' constructed from array mask_',I2.2,'_',A,'_loop:'/ &
	1788	' loop begin:',F8.2,', end:',F8.2,', stride:',F8.2 )
[1]	1789	#if defined( __dvrp_graphics )
	1790	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
	1791	' Output every ',F7.1,' s'/ &
	1792	' Output mode: ',A/ &
	1793	' Host / User: ',A,' / ',A/ &
	1794	' Directory: ',A// &
	1795	' The sequence contains:')
[337]	1796	361 FORMAT (/' Isosurface of "',A,'" Threshold value: ', E12.3/ &
	1797	' Isosurface color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
	1798	362 FORMAT (/' Slicer plane ',A/ &
[336]	1799	' Slicer limits: [',F6.2,',',F6.2,']')
[337]	1800	363 FORMAT (/' Particles'/ &
[336]	1801	' particle size: ',F7.2,' m')
	1802	364 FORMAT (' particle ',A,' controlled by "',A,'" with interval [', &
	1803	F6.2,',',F6.2,']')
[337]	1804	365 FORMAT (/' Groundplate color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)'/ &
[336]	1805	' Superelevation along (x,y,z): (',F4.1,',',F4.1,',',F4.1, &
	1806	')'/ &
	1807	' Clipping limits: from x = ',F9.1,' m to x = ',F9.1,' m'/ &
	1808	' from y = ',F9.1,' m to y = ',F9.1,' m')
[337]	1809	366 FORMAT (/' Topography color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
[336]	1810	367 FORMAT (' Polygon reduction for topography: cluster_size = ', I1)
[1]	1811	#endif
	1812	#if defined( __spectra )
	1813	370 FORMAT (' Spectra:')
	1814	371 FORMAT (' Output every ',F7.1,' s'/)
	1815	372 FORMAT (' Arrays: ', 10(A5,',')/ &
	1816	' Directions: ', 10(A5,',')/ &
[189]	1817	' height levels k = ', 20(I3,',')/ &
	1818	' ', 20(I3,',')/ &
	1819	' ', 20(I3,',')/ &
	1820	' ', 20(I3,',')/ &
	1821	' ', 19(I3,','),I3,'.'/ &
[1]	1822	' height levels selected for standard plot:'/ &
[189]	1823	' k = ', 20(I3,',')/ &
	1824	' ', 20(I3,',')/ &
	1825	' ', 20(I3,',')/ &
	1826	' ', 20(I3,',')/ &
	1827	' ', 19(I3,','),I3,'.'/ &
[1]	1828	' Time averaged over ', F7.1, ' s,' / &
	1829	' Profiles for the time averaging are taken every ', &
	1830	F6.1,' s')
	1831	#endif
	1832	400 FORMAT (//' Physical quantities:'/ &
	1833	' -------------------'/)
	1834	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
	1835	' Geograph. latitude : phi = ',F4.1,' degr'/ &
	1836	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
	1837	' f* = ',F9.6,' 1/s')
	1838	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
[97]	1839	412 FORMAT (/' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
	1840	413 FORMAT (/' Reference temperature in buoyancy terms: ',F8.4,' K')
[57]	1841	415 FORMAT (/' Cloud physics parameters:'/ &
[1]	1842	' ------------------------'/)
[57]	1843	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
[1]	1844	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
	1845	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
	1846	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
	1847	' Vapourization heat : L_v = ',E8.2,' J/kg')
	1848	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
	1849	' Height: ',A,' m'/ &
	1850	' Temperature: ',A,' K'/ &
	1851	' Gradient: ',A,' K/100m'/ &
	1852	' Gridpoint: ',A)
	1853	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
	1854	' Height: ',A,' m'/ &
	1855	' Humidity: ',A,' kg/kg'/ &
	1856	' Gradient: ',A,' (kg/kg)/100m'/ &
	1857	' Gridpoint: ',A)
	1858	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
	1859	' Height: ',A,' m'/ &
	1860	' Scalar concentration: ',A,' kg/m**3'/ &
	1861	' Gradient: ',A,' (kg/m**3)/100m'/ &
	1862	' Gridpoint: ',A)
	1863	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
	1864	' Height: ',A,' m'/ &
	1865	' ug: ',A,' m/s'/ &
	1866	' Gradient: ',A,' 1/100s'/ &
	1867	' Gridpoint: ',A)
	1868	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
	1869	' Height: ',A,' m'/ &
[97]	1870	' vg: ',A,' m/s'/ &
[1]	1871	' Gradient: ',A,' 1/100s'/ &
	1872	' Gridpoint: ',A)
[97]	1873	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
	1874	' Height: ',A,' m'/ &
	1875	' Salinity: ',A,' psu'/ &
	1876	' Gradient: ',A,' psu/100m'/ &
	1877	' Gridpoint: ',A)
[411]	1878	426 FORMAT (/' Characteristic levels of the subsidence/ascent profile:'// &
	1879	' Height: ',A,' m'/ &
	1880	' w_subs: ',A,' m/s'/ &
	1881	' Gradient: ',A,' (m/s)/100m'/ &
	1882	' Gridpoint: ',A)
[767]	1883	427 FORMAT (/' Initial wind profiles (u,v) are interpolated from given'// &
	1884	' profiles')
[824]	1885	430 FORMAT (//' Cloud physics quantities / methods:'/ &
	1886	' ----------------------------------'/)
	1887	431 FORMAT (' Humidity is treated as purely passive scalar (no condensati', &
	1888	'on)')
	1889	432 FORMAT (' Bulk scheme with liquid water potential temperature and'/ &
	1890	' total water content is used.'/ &
	1891	' Condensation is parameterized via 0% - or 100% scheme.')
	1892	433 FORMAT (' Cloud droplets treated explicitly using the Lagrangian part', &
	1893	'icle model')
	1894	434 FORMAT (' Curvature and solution effecs are considered for growth of', &
	1895	' droplets < 1.0E-6 m')
[825]	1896	435 FORMAT (' Droplet collision is handled by ',A,'-kernel')
[828]	1897	436 FORMAT (' Fast kernel with fixed radius- and dissipation classes ', &
	1898	'are used'/ &
	1899	' number of radius classes: ',I3,' interval ', &
	1900	'[1.0E-6,2.0E-4] m'/ &
	1901	' number of dissipation classes: ',I2,' interval ', &
	1902	'[0,1000] cm2/s3')
	1903	437 FORMAT (' Droplet collision is switched off')
[1]	1904	450 FORMAT (//' LES / Turbulence quantities:'/ &
	1905	' ---------------------------'/)
[824]	1906	451 FORMAT (' Diffusion coefficients are constant:'/ &
	1907	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
	1908	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
	1909	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
	1910	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
[1]	1911	470 FORMAT (//' Actions during the simulation:'/ &
	1912	' -----------------------------'/)
[94]	1913	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
	1914	' Disturbance amplitude : ',F4.2, ' m/s'/ &
	1915	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
	1916	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
[1]	1917	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
	1918	' to i/j =',I4)
	1919	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
	1920	1X,F5.3, ' m2/s2')
	1921	474 FORMAT (' Random number generator used : ',A/)
	1922	475 FORMAT (' The surface temperature is increased (or decreased, ', &
	1923	'respectively, if'/ &
	1924	' the value is negative) by ',F5.2,' K at the beginning of the',&
	1925	' 3D-simulation'/)
	1926	476 FORMAT (' The surface humidity is increased (or decreased, ',&
	1927	'respectively, if the'/ &
	1928	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
	1929	' the 3D-simulation'/)
	1930	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
	1931	'respectively, if the'/ &
	1932	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
	1933	' the 3D-simulation'/)
	1934	480 FORMAT (' Particles:'/ &
	1935	' ---------'// &
	1936	' Particle advection is active (switched on at t = ', F7.1, &
	1937	' s)'/ &
	1938	' Start of new particle generations every ',F6.1,' s'/ &
	1939	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
	1940	' bottom: ', A, ' top: ', A/&
	1941	' Maximum particle age: ',F9.1,' s'/ &
[117]	1942	' Advection stopped at t = ',F9.1,' s'/ &
	1943	' Particles are sorted every ',F9.1,' s'/)
[1]	1944	481 FORMAT (' Particles have random start positions'/)
[336]	1945	482 FORMAT (' Particles are advected only horizontally'/)
[1]	1946	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
	1947	484 FORMAT (' Number of tails of the total domain: ',I10/ &
	1948	' Minimum distance between tailpoints: ',F8.2,' m'/ &
	1949	' Maximum age of the end of the tail: ',F8.2,' s')
	1950	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
	1951	486 FORMAT (' Particle statistics are written on file'/)
	1952	487 FORMAT (' Number of particle groups: ',I2/)
	1953	488 FORMAT (' SGS velocity components are used for particle advection'/ &
	1954	' minimum timestep for advection: ', F7.5/)
	1955	489 FORMAT (' Number of particles simultaneously released at each ', &
	1956	'point: ', I5/)
	1957	490 FORMAT (' Particle group ',I2,':'/ &
	1958	' Particle radius: ',E10.3, 'm')
	1959	491 FORMAT (' Particle inertia is activated'/ &
	1960	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
	1961	492 FORMAT (' Particles are advected only passively (no inertia)'/)
	1962	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
	1963	' y:',F8.1,' - ',F8.1,' m'/&
	1964	' z:',F8.1,' - ',F8.1,' m'/&
	1965	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
	1966	' m dz = ',F8.1,' m'/)
	1967	494 FORMAT (' Output of particle time series in NetCDF format every ', &
	1968	F8.2,' s'/)
	1969	495 FORMAT (' Number of particles in total domain: ',I10/)
	1970	500 FORMAT (//' 1D-Model parameters:'/ &
	1971	' -------------------'// &
	1972	' Simulation time: ',F8.1,' s'/ &
	1973	' Run-controll output every: ',F8.1,' s'/ &
	1974	' Vertical profile output every: ',F8.1,' s'/ &
	1975	' Mixing length calculation: ',A/ &
	1976	' Dissipation calculation: ',A/)
	1977	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
[667]	1978	503 FORMAT (' --> Momentum advection via Wicker-Skamarock-Scheme 5th order')
	1979	504 FORMAT (' --> Scalar advection via Wicker-Skamarock-Scheme 5th order')
[1]	1980
	1981
	1982	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |