Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 100

Last change on this file since 100 was 98, checked in by raasch, 17 years ago
updating comments and rc-file
Property svn:keywords set to `Id`
File size: 57.6 KB

Rev	Line
[1]	1	SUBROUTINE header
	2
	3	!------------------------------------------------------------------------------!
	4	! Actual revisions:
	5	! -----------------
[98]	6	!
[1]	7	!
	8	! Former revisions:
	9	! -----------------
[3]	10	! $Id: header.f90 98 2007-06-21 09:36:33Z raasch $
[39]	11	!
[98]	12	! 97 2007-06-21 08:23:15Z raasch
	13	! Adjustments for the ocean version.
	14	! use_pt_reference renamed use_reference
	15	!
[90]	16	! 87 2007-05-22 15:46:47Z raasch
	17	! Bugfix: output of use_upstream_for_tke
	18	!
[83]	19	! 82 2007-04-16 15:40:52Z raasch
	20	! Preprocessor strings for different linux clusters changed to "lc",
	21	! routine local_flush is used for buffer flushing
	22	!
[77]	23	! 76 2007-03-29 00:58:32Z raasch
	24	! Output of netcdf_64bit_3d, particles-package is now part of the default code,
	25	! output of the loop optimization method, moisture renamed humidity,
	26	! output of subversion revision number
	27	!
[39]	28	! 19 2007-02-23 04:53:48Z raasch
	29	! Output of scalar flux applied at top boundary
	30	!
[3]	31	! RCS Log replace by Id keyword, revision history cleaned up
	32	!
[1]	33	! Revision 1.63 2006/08/22 13:53:13 raasch
	34	! Output of dz_max
	35	!
	36	! Revision 1.1 1997/08/11 06:17:20 raasch
	37	! Initial revision
	38	!
	39	!
	40	! Description:
	41	! ------------
	42	! Writing a header with all important informations about the actual run.
	43	! This subroutine is called three times, two times at the beginning
	44	! (writing information on files RUN_CONTROL and HEADER) and one time at the
	45	! end of the run, then writing additional information about CPU-usage on file
	46	! header.
	47	!------------------------------------------------------------------------------!
	48
	49	USE arrays_3d
	50	USE control_parameters
	51	USE cloud_parameters
	52	USE cpulog
	53	USE dvrp_variables
	54	USE grid_variables
	55	USE indices
	56	USE model_1d
	57	USE particle_attributes
	58	USE pegrid
	59	USE spectrum
	60
	61	IMPLICIT NONE
	62
	63	CHARACTER (LEN=1) :: prec
	64	CHARACTER (LEN=2) :: do2d_mode
	65	CHARACTER (LEN=5) :: section_chr
	66	CHARACTER (LEN=9) :: time_to_string
	67	CHARACTER (LEN=10) :: coor_chr, host_chr
	68	CHARACTER (LEN=16) :: begin_chr
[75]	69	CHARACTER (LEN=21) :: ver_rev
[1]	70	CHARACTER (LEN=40) :: output_format
	71	CHARACTER (LEN=70) :: char1, char2, coordinates, gradients, dopr_chr, &
	72	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
	73	run_classification, slices, temperatures, &
	74	ugcomponent, vgcomponent
	75	CHARACTER (LEN=85) :: roben, runten
	76
	77	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, i, ihost, io, j, l, ll
	78	REAL :: cpuseconds_per_simulated_second
	79
	80	!
	81	!-- Open the output file. At the end of the simulation, output is directed
	82	!-- to unit 19.
	83	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
	84	.NOT. simulated_time_at_begin /= simulated_time ) THEN
	85	io = 15 ! header output on file RUN_CONTROL
	86	ELSE
	87	io = 19 ! header output on file HEADER
	88	ENDIF
	89	CALL check_open( io )
	90
	91	!
	92	!-- At the end of the run, output file (HEADER) will be rewritten with
	93	!-- new informations
	94	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
	95
	96	!
	97	!-- Determine kind of model run
	98	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
	99	run_classification = '3D - restart run'
	100	ELSE
	101	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
	102	run_classification = '3D - run without 1D - prerun'
	103	ELSEIF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
	104	run_classification = '3D - run with 1D - prerun'
	105	ELSE
	106	PRINT*,'+++ header: unknown action(s): ',initializing_actions
	107	ENDIF
	108	ENDIF
[97]	109	IF ( ocean ) THEN
	110	run_classification = 'ocean - ' // run_classification
	111	ELSE
	112	run_classification = 'atmosphere - ' // run_classification
	113	ENDIF
[1]	114
	115	!
	116	!-- Run-identification, date, time, host
	117	host_chr = host(1:10)
[75]	118	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
	119	WRITE ( io, 100 ) ver_rev, TRIM( run_classification ), run_date, &
[1]	120	run_identifier, run_time, runnr, ADJUSTR( host_chr )
	121	#if defined( __parallel )
	122	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
	123	char1 = 'calculated'
	124	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	125	host(1:2) == 'lc' ) .AND. &
	126	npex == -1 .AND. pdims(2) == 1 ) THEN
	127	char1 = 'forced'
	128	ELSE
	129	char1 = 'predefined'
	130	ENDIF
	131	IF ( threads_per_task == 1 ) THEN
	132	WRITE ( io, 101 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
	133	ELSE
	134	WRITE ( io, 102 ) numprocs*threads_per_task, numprocs, &
	135	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
	136	ENDIF
	137	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	138	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
	139	npex == -1 .AND. pdims(2) == 1 ) &
	140	THEN
	141	WRITE ( io, 104 )
	142	ELSEIF ( pdims(2) == 1 ) THEN
	143	WRITE ( io, 105 ) 'x'
	144	ELSEIF ( pdims(1) == 1 ) THEN
	145	WRITE ( io, 105 ) 'y'
	146	ENDIF
	147	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 103 )
	148	#endif
	149	WRITE ( io, 99 )
	150
	151	!
	152	!-- Numerical schemes
	153	WRITE ( io, 110 )
	154	IF ( psolver(1:7) == 'poisfft' ) THEN
	155	WRITE ( io, 111 ) TRIM( fft_method )
	156	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
	157	ELSEIF ( psolver == 'sor' ) THEN
	158	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
	159	ELSEIF ( psolver == 'multigrid' ) THEN
	160	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
	161	IF ( mg_cycles == -1 ) THEN
	162	WRITE ( io, 140 ) residual_limit
	163	ELSE
	164	WRITE ( io, 141 ) mg_cycles
	165	ENDIF
	166	IF ( mg_switch_to_pe0_level == 0 ) THEN
	167	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	168	nzt_mg(1)
	169	ELSE
	170	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
	171	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
	172	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
	173	nzt_mg(mg_switch_to_pe0_level), &
	174	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	175	nzt_mg(1)
	176	ENDIF
	177	ENDIF
	178	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
	179	THEN
	180	WRITE ( io, 142 )
	181	ENDIF
	182
	183	IF ( momentum_advec == 'pw-scheme' ) THEN
	184	WRITE ( io, 113 )
	185	ELSE
	186	WRITE ( io, 114 )
	187	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
	188	IF ( overshoot_limit_u /= 0.0 .OR. overshoot_limit_v /= 0.0 .OR. &
	189	overshoot_limit_w /= 0.0 ) THEN
	190	WRITE ( io, 127 ) overshoot_limit_u, overshoot_limit_v, &
	191	overshoot_limit_w
	192	ENDIF
	193	IF ( ups_limit_u /= 0.0 .OR. ups_limit_v /= 0.0 .OR. &
	194	ups_limit_w /= 0.0 ) &
	195	THEN
	196	WRITE ( io, 125 ) ups_limit_u, ups_limit_v, ups_limit_w
	197	ENDIF
	198	IF ( long_filter_factor /= 0.0 ) WRITE ( io, 115 ) long_filter_factor
	199	ENDIF
	200	IF ( scalar_advec == 'pw-scheme' ) THEN
	201	WRITE ( io, 116 )
	202	ELSEIF ( scalar_advec == 'ups-scheme' ) THEN
	203	WRITE ( io, 117 )
	204	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
	205	IF ( overshoot_limit_e /= 0.0 .OR. overshoot_limit_pt /= 0.0 ) THEN
	206	WRITE ( io, 128 ) overshoot_limit_e, overshoot_limit_pt
	207	ENDIF
	208	IF ( ups_limit_e /= 0.0 .OR. ups_limit_pt /= 0.0 ) THEN
	209	WRITE ( io, 126 ) ups_limit_e, ups_limit_pt
	210	ENDIF
	211	ELSE
	212	WRITE ( io, 118 )
	213	ENDIF
[63]	214
	215	WRITE ( io, 139 ) TRIM( loop_optimization )
	216
[1]	217	IF ( galilei_transformation ) THEN
	218	IF ( use_ug_for_galilei_tr ) THEN
	219	char1 = 'geostrophic wind'
	220	ELSE
	221	char1 = 'mean wind in model domain'
	222	ENDIF
	223	IF ( simulated_time_at_begin == simulated_time ) THEN
	224	char2 = 'at the start of the run'
	225	ELSE
	226	char2 = 'at the end of the run'
	227	ENDIF
	228	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
	229	advected_distance_x/1000.0, advected_distance_y/1000.0
	230	ENDIF
	231	IF ( timestep_scheme == 'leapfrog' ) THEN
	232	WRITE ( io, 120 )
	233	ELSEIF ( timestep_scheme == 'leapfrog+euler' ) THEN
	234	WRITE ( io, 121 )
	235	ELSE
	236	WRITE ( io, 122 ) timestep_scheme
	237	ENDIF
[87]	238	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
[1]	239	IF ( rayleigh_damping_factor /= 0.0 ) THEN
	240	WRITE ( io, 123 ) rayleigh_damping_height, rayleigh_damping_factor
	241	ENDIF
[75]	242	IF ( humidity ) THEN
[1]	243	IF ( .NOT. cloud_physics ) THEN
	244	WRITE ( io, 129 )
	245	ELSE
	246	WRITE ( io, 130 )
	247	WRITE ( io, 131 )
	248	IF ( radiation ) WRITE ( io, 132 )
	249	IF ( precipitation ) WRITE ( io, 133 )
	250	ENDIF
	251	ENDIF
	252	IF ( passive_scalar ) WRITE ( io, 134 )
	253	IF ( conserve_volume_flow ) WRITE ( io, 150 )
	254	WRITE ( io, 99 )
	255
	256	!
	257	!-- Runtime and timestep informations
	258	WRITE ( io, 200 )
	259	IF ( .NOT. dt_fixed ) THEN
	260	WRITE ( io, 201 ) dt_max, cfl_factor
	261	ELSE
	262	WRITE ( io, 202 ) dt
	263	ENDIF
	264	WRITE ( io, 203 ) simulated_time_at_begin, end_time
	265
	266	IF ( time_restart /= 9999999.9 .AND. &
	267	simulated_time_at_begin == simulated_time ) THEN
	268	IF ( dt_restart == 9999999.9 ) THEN
	269	WRITE ( io, 204 ) ' Restart at: ',time_restart
	270	ELSE
	271	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
	272	ENDIF
	273	ENDIF
	274
	275	IF ( simulated_time_at_begin /= simulated_time ) THEN
	276	i = MAX ( log_point_s(10)%counts, 1 )
	277	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
	278	cpuseconds_per_simulated_second = 0.0
	279	ELSE
	280	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
	281	( simulated_time - &
	282	simulated_time_at_begin )
	283	ENDIF
	284	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
	285	log_point_s(10)%sum / REAL( i ), &
	286	cpuseconds_per_simulated_second
	287	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
	288	IF ( dt_restart == 9999999.9 ) THEN
	289	WRITE ( io, 204 ) ' Next restart at: ',time_restart
	290	ELSE
	291	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
	292	ENDIF
	293	ENDIF
	294	ENDIF
	295
	296	!
	297	!-- Computational grid
[94]	298	IF ( .NOT. ocean ) THEN
	299	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
	300	IF ( dz_stretch_level_index < nzt+1 ) THEN
	301	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	302	dz_stretch_factor, dz_max
	303	ENDIF
	304	ELSE
	305	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(0)
	306	IF ( dz_stretch_level_index > 0 ) THEN
	307	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	308	dz_stretch_factor, dz_max
	309	ENDIF
[1]	310	ENDIF
	311	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
	312	MIN( nnz+2, nzt+2 )
[76]	313	IF ( numprocs > 1 ) THEN
	314	IF ( nxa == nx .AND. nya == ny .AND. nza == nz ) THEN
	315	WRITE ( io, 255 )
	316	ELSE
	317	WRITE ( io, 256 ) nnx-(nxa-nx), nny-(nya-ny), nzt+2
	318	ENDIF
[1]	319	ENDIF
	320	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
	321
	322	!
	323	!-- Topography
	324	WRITE ( io, 270 ) topography
	325	SELECT CASE ( TRIM( topography ) )
	326
	327	CASE ( 'flat' )
	328	! no actions necessary
	329
	330	CASE ( 'single_building' )
	331	blx = INT( building_length_x / dx )
	332	bly = INT( building_length_y / dy )
	333	bh = INT( building_height / dz )
	334
	335	IF ( building_wall_left == 9999999.9 ) THEN
	336	building_wall_left = ( nx + 1 - blx ) / 2 * dx
	337	ENDIF
	338	bxl = INT ( building_wall_left / dx + 0.5 )
	339	bxr = bxl + blx
	340
	341	IF ( building_wall_south == 9999999.9 ) THEN
	342	building_wall_south = ( ny + 1 - bly ) / 2 * dy
	343	ENDIF
	344	bys = INT ( building_wall_south / dy + 0.5 )
	345	byn = bys + bly
	346
	347	WRITE ( io, 271 ) building_length_x, building_length_y, &
	348	building_height, bxl, bxr, bys, byn
	349
	350	END SELECT
	351
	352	!
	353	!-- Boundary conditions
	354	IF ( ibc_p_b == 0 ) THEN
	355	runten = 'p(0) = 0 \|'
	356	ELSEIF ( ibc_p_b == 1 ) THEN
	357	runten = 'p(0) = p(1) \|'
	358	ELSE
	359	runten = 'p(0) = p(1) +R\|'
	360	ENDIF
	361	IF ( ibc_p_t == 0 ) THEN
	362	roben = 'p(nzt+1) = 0 \|'
	363	ELSE
	364	roben = 'p(nzt+1) = p(nzt) \|'
	365	ENDIF
	366
	367	IF ( ibc_uv_b == 0 ) THEN
	368	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
	369	ELSE
	370	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
	371	ENDIF
	372	IF ( ibc_uv_t == 0 ) THEN
	373	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
	374	ELSE
	375	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
	376	ENDIF
	377
	378	IF ( ibc_pt_b == 0 ) THEN
	379	runten = TRIM( runten ) // ' pt(0) = pt_surface'
	380	ELSE
	381	runten = TRIM( runten ) // ' pt(0) = pt(1)'
	382	ENDIF
	383	IF ( ibc_pt_t == 0 ) THEN
[19]	384	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
	385	ELSEIF( ibc_pt_t == 1 ) THEN
	386	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
	387	ELSEIF( ibc_pt_t == 2 ) THEN
	388	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
[1]	389	ENDIF
	390
	391	WRITE ( io, 300 ) runten, roben
	392
	393	IF ( .NOT. constant_diffusion ) THEN
	394	IF ( ibc_e_b == 1 ) THEN
	395	runten = 'e(0) = e(1)'
	396	ELSE
	397	runten = 'e(0) = e(1) = (u/0.1)*2'
	398	ENDIF
	399	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
	400
[97]	401	WRITE ( io, 301 ) 'e', runten, roben
[1]	402
	403	ENDIF
	404
[97]	405	IF ( ocean ) THEN
	406	runten = 'sa(0) = sa(1)'
	407	IF ( ibc_sa_t == 0 ) THEN
	408	roben = 'sa(nzt+1) = sa_surface'
[1]	409	ELSE
[97]	410	roben = 'sa(nzt+1) = sa(nzt)'
[1]	411	ENDIF
[97]	412	WRITE ( io, 301 ) 'sa', runten, roben
	413	ENDIF
[1]	414
[97]	415	IF ( humidity ) THEN
	416	IF ( ibc_q_b == 0 ) THEN
	417	runten = 'q(0) = q_surface'
	418	ELSE
	419	runten = 'q(0) = q(1)'
	420	ENDIF
	421	IF ( ibc_q_t == 0 ) THEN
	422	roben = 'q(nzt) = q_top'
	423	ELSE
	424	roben = 'q(nzt) = q(nzt-1) + dq/dz'
	425	ENDIF
	426	WRITE ( io, 301 ) 'q', runten, roben
	427	ENDIF
[1]	428
[97]	429	IF ( passive_scalar ) THEN
	430	IF ( ibc_q_b == 0 ) THEN
	431	runten = 's(0) = s_surface'
	432	ELSE
	433	runten = 's(0) = s(1)'
	434	ENDIF
	435	IF ( ibc_q_t == 0 ) THEN
	436	roben = 's(nzt) = s_top'
	437	ELSE
	438	roben = 's(nzt) = s(nzt-1) + ds/dz'
	439	ENDIF
	440	WRITE ( io, 301 ) 's', runten, roben
[1]	441	ENDIF
	442
	443	IF ( use_surface_fluxes ) THEN
	444	WRITE ( io, 303 )
	445	IF ( constant_heatflux ) THEN
	446	WRITE ( io, 306 ) surface_heatflux
	447	IF ( random_heatflux ) WRITE ( io, 307 )
	448	ENDIF
[75]	449	IF ( humidity .AND. constant_waterflux ) THEN
[1]	450	WRITE ( io, 311 ) surface_waterflux
	451	ENDIF
	452	IF ( passive_scalar .AND. constant_waterflux ) THEN
	453	WRITE ( io, 313 ) surface_waterflux
	454	ENDIF
	455	ENDIF
	456
[19]	457	IF ( use_top_fluxes ) THEN
	458	WRITE ( io, 304 )
	459	IF ( constant_top_heatflux ) THEN
	460	WRITE ( io, 306 ) top_heatflux
	461	ENDIF
[97]	462	IF ( ocean .AND. constant_top_salinityflux ) THEN
	463	WRITE ( io, 309 ) top_salinityflux
	464	ENDIF
[75]	465	IF ( humidity .OR. passive_scalar ) THEN
[19]	466	WRITE ( io, 315 )
	467	ENDIF
	468	ENDIF
	469
[1]	470	IF ( prandtl_layer ) THEN
[94]	471	WRITE ( io, 305 ) 0.5 * (zu(1)-zu(0)), roughness_length, kappa, &
	472	rif_min, rif_max
[1]	473	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
[75]	474	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
[1]	475	WRITE ( io, 312 )
	476	ENDIF
	477	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
	478	WRITE ( io, 314 )
	479	ENDIF
	480	ELSE
	481	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
	482	WRITE ( io, 310 ) rif_min, rif_max
	483	ENDIF
	484	ENDIF
	485
	486	WRITE ( io, 317 ) bc_lr, bc_ns
	487	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	488	WRITE ( io, 318 ) outflow_damping_width, km_damp_max
	489	ENDIF
	490
	491	!
	492	!-- Listing of 1D-profiles
	493	WRITE ( io, 320 ) dt_dopr_listing
	494	IF ( averaging_interval_pr /= 0.0 ) THEN
	495	WRITE ( io, 321 ) averaging_interval_pr, dt_averaging_input_pr
	496	ENDIF
	497
	498	!
	499	!-- DATA output
	500	WRITE ( io, 330 )
	501	IF ( averaging_interval_pr /= 0.0 ) THEN
	502	WRITE ( io, 321 ) averaging_interval_pr, dt_averaging_input_pr
	503	ENDIF
	504
	505	!
	506	!-- 1D-profiles
	507	dopr_chr = 'Profile:'
	508	IF ( dopr_n /= 0 ) THEN
	509	WRITE ( io, 331 )
	510
	511	output_format = ''
	512	IF ( netcdf_output ) THEN
	513	IF ( netcdf_64bit ) THEN
	514	output_format = 'netcdf (64 bit offset)'
	515	ELSE
	516	output_format = 'netcdf'
	517	ENDIF
	518	ENDIF
	519	IF ( profil_output ) THEN
	520	IF ( netcdf_output ) THEN
	521	output_format = TRIM( output_format ) // ' and profil'
	522	ELSE
	523	output_format = 'profil'
	524	ENDIF
	525	ENDIF
	526	WRITE ( io, 345 ) output_format
	527
	528	DO i = 1, dopr_n
	529	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
	530	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
	531	WRITE ( io, 332 ) dopr_chr
	532	dopr_chr = ' :'
	533	ENDIF
	534	ENDDO
	535
	536	IF ( dopr_chr /= '' ) THEN
	537	WRITE ( io, 332 ) dopr_chr
	538	ENDIF
	539	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
	540	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
	541	ENDIF
	542
	543	!
	544	!-- 2D-arrays
	545	DO av = 0, 1
	546
	547	i = 1
	548	do2d_xy = ''
	549	do2d_xz = ''
	550	do2d_yz = ''
	551	DO WHILE ( do2d(av,i) /= ' ' )
	552
	553	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
	554	do2d_mode = do2d(av,i)(l-1:l)
	555
	556	SELECT CASE ( do2d_mode )
	557	CASE ( 'xy' )
	558	ll = LEN_TRIM( do2d_xy )
	559	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	560	CASE ( 'xz' )
	561	ll = LEN_TRIM( do2d_xz )
	562	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	563	CASE ( 'yz' )
	564	ll = LEN_TRIM( do2d_yz )
	565	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	566	END SELECT
	567
	568	i = i + 1
	569
	570	ENDDO
	571
	572	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
	573	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
	574	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
	575	( netcdf_output .OR. iso2d_output ) ) THEN
	576
	577	IF ( av == 0 ) THEN
	578	WRITE ( io, 334 ) ''
	579	ELSE
	580	WRITE ( io, 334 ) '(time-averaged)'
	581	ENDIF
	582
	583	IF ( do2d_at_begin ) THEN
	584	begin_chr = 'and at the start'
	585	ELSE
	586	begin_chr = ''
	587	ENDIF
	588
	589	output_format = ''
	590	IF ( netcdf_output ) THEN
	591	IF ( netcdf_64bit ) THEN
	592	output_format = 'netcdf (64 bit offset)'
	593	ELSE
	594	output_format = 'netcdf'
	595	ENDIF
	596	ENDIF
	597	IF ( iso2d_output ) THEN
	598	IF ( netcdf_output ) THEN
	599	output_format = TRIM( output_format ) // ' and iso2d'
	600	ELSE
	601	output_format = 'iso2d'
	602	ENDIF
	603	ENDIF
	604	WRITE ( io, 345 ) output_format
	605
	606	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
	607	i = 1
	608	slices = '/'
	609	coordinates = '/'
	610	!
	611	!-- Building strings with index and coordinate informations of the
	612	!-- slices
	613	DO WHILE ( section(i,1) /= -9999 )
	614
	615	WRITE (section_chr,'(I5)') section(i,1)
	616	section_chr = ADJUSTL( section_chr )
	617	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	618
	619	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
	620	coor_chr = ADJUSTL( coor_chr )
	621	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	622
	623	i = i + 1
	624	ENDDO
	625	IF ( av == 0 ) THEN
	626	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
	627	TRIM( begin_chr ), 'k', TRIM( slices ), &
	628	TRIM( coordinates )
	629	IF ( skip_time_do2d_xy /= 0.0 ) THEN
	630	WRITE ( io, 339 ) skip_time_do2d_xy
	631	ENDIF
	632	ELSE
	633	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
	634	TRIM( begin_chr ), averaging_interval, &
	635	dt_averaging_input, 'k', TRIM( slices ), &
	636	TRIM( coordinates )
	637	IF ( skip_time_data_output_av /= 0.0 ) THEN
	638	WRITE ( io, 339 ) skip_time_data_output_av
	639	ENDIF
	640	ENDIF
	641
	642	ENDIF
	643
	644	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
	645	i = 1
	646	slices = '/'
	647	coordinates = '/'
	648	!
	649	!-- Building strings with index and coordinate informations of the
	650	!-- slices
	651	DO WHILE ( section(i,2) /= -9999 )
	652
	653	WRITE (section_chr,'(I5)') section(i,2)
	654	section_chr = ADJUSTL( section_chr )
	655	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	656
	657	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
	658	coor_chr = ADJUSTL( coor_chr )
	659	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	660
	661	i = i + 1
	662	ENDDO
	663	IF ( av == 0 ) THEN
	664	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
	665	TRIM( begin_chr ), 'j', TRIM( slices ), &
	666	TRIM( coordinates )
	667	IF ( skip_time_do2d_xz /= 0.0 ) THEN
	668	WRITE ( io, 339 ) skip_time_do2d_xz
	669	ENDIF
	670	ELSE
	671	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
	672	TRIM( begin_chr ), averaging_interval, &
	673	dt_averaging_input, 'j', TRIM( slices ), &
	674	TRIM( coordinates )
	675	IF ( skip_time_data_output_av /= 0.0 ) THEN
	676	WRITE ( io, 339 ) skip_time_data_output_av
	677	ENDIF
	678	ENDIF
	679	ENDIF
	680
	681	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
	682	i = 1
	683	slices = '/'
	684	coordinates = '/'
	685	!
	686	!-- Building strings with index and coordinate informations of the
	687	!-- slices
	688	DO WHILE ( section(i,3) /= -9999 )
	689
	690	WRITE (section_chr,'(I5)') section(i,3)
	691	section_chr = ADJUSTL( section_chr )
	692	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	693
	694	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
	695	coor_chr = ADJUSTL( coor_chr )
	696	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	697
	698	i = i + 1
	699	ENDDO
	700	IF ( av == 0 ) THEN
	701	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
	702	TRIM( begin_chr ), 'i', TRIM( slices ), &
	703	TRIM( coordinates )
	704	IF ( skip_time_do2d_yz /= 0.0 ) THEN
	705	WRITE ( io, 339 ) skip_time_do2d_yz
	706	ENDIF
	707	ELSE
	708	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
	709	TRIM( begin_chr ), averaging_interval, &
	710	dt_averaging_input, 'i', TRIM( slices ), &
	711	TRIM( coordinates )
	712	IF ( skip_time_data_output_av /= 0.0 ) THEN
	713	WRITE ( io, 339 ) skip_time_data_output_av
	714	ENDIF
	715	ENDIF
	716	ENDIF
	717
	718	ENDIF
	719
	720	ENDDO
	721
	722	!
	723	!-- 3d-arrays
	724	DO av = 0, 1
	725
	726	i = 1
	727	do3d_chr = ''
	728	DO WHILE ( do3d(av,i) /= ' ' )
	729
	730	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
	731	i = i + 1
	732
	733	ENDDO
	734
	735	IF ( do3d_chr /= '' ) THEN
	736	IF ( av == 0 ) THEN
	737	WRITE ( io, 336 ) ''
	738	ELSE
	739	WRITE ( io, 336 ) '(time-averaged)'
	740	ENDIF
	741
	742	output_format = ''
	743	IF ( netcdf_output ) THEN
[46]	744	IF ( netcdf_64bit .AND. netcdf_64bit_3d ) THEN
[1]	745	output_format = 'netcdf (64 bit offset)'
	746	ELSE
	747	output_format = 'netcdf'
	748	ENDIF
	749	ENDIF
	750	IF ( avs_output ) THEN
	751	IF ( netcdf_output ) THEN
	752	output_format = TRIM( output_format ) // ' and avs'
	753	ELSE
	754	output_format = 'avs'
	755	ENDIF
	756	ENDIF
	757	WRITE ( io, 345 ) output_format
	758
	759	IF ( do3d_at_begin ) THEN
	760	begin_chr = 'and at the start'
	761	ELSE
	762	begin_chr = ''
	763	ENDIF
	764	IF ( av == 0 ) THEN
	765	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
	766	zu(nz_do3d), nz_do3d
	767	ELSE
	768	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
	769	TRIM( begin_chr ), averaging_interval, &
	770	dt_averaging_input, zu(nz_do3d), nz_do3d
	771	ENDIF
	772
	773	IF ( do3d_compress ) THEN
	774	do3d_chr = ''
	775	i = 1
	776	DO WHILE ( do3d(av,i) /= ' ' )
	777
	778	SELECT CASE ( do3d(av,i) )
	779	CASE ( 'u' )
	780	j = 1
	781	CASE ( 'v' )
	782	j = 2
	783	CASE ( 'w' )
	784	j = 3
	785	CASE ( 'p' )
	786	j = 4
	787	CASE ( 'pt' )
	788	j = 5
	789	END SELECT
	790	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
	791	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
	792	':' // prec // ','
	793	i = i + 1
	794
	795	ENDDO
	796	WRITE ( io, 338 ) do3d_chr
	797
	798	ENDIF
	799
	800	IF ( av == 0 ) THEN
	801	IF ( skip_time_do3d /= 0.0 ) THEN
	802	WRITE ( io, 339 ) skip_time_do3d
	803	ENDIF
	804	ELSE
	805	IF ( skip_time_data_output_av /= 0.0 ) THEN
	806	WRITE ( io, 339 ) skip_time_data_output_av
	807	ENDIF
	808	ENDIF
	809
	810	ENDIF
	811
	812	ENDDO
	813
	814	!
	815	!-- Timeseries
	816	IF ( dt_dots /= 9999999.9 ) THEN
	817	WRITE ( io, 340 )
	818
	819	output_format = ''
	820	IF ( netcdf_output ) THEN
	821	IF ( netcdf_64bit ) THEN
	822	output_format = 'netcdf (64 bit offset)'
	823	ELSE
	824	output_format = 'netcdf'
	825	ENDIF
	826	ENDIF
	827	IF ( profil_output ) THEN
	828	IF ( netcdf_output ) THEN
	829	output_format = TRIM( output_format ) // ' and profil'
	830	ELSE
	831	output_format = 'profil'
	832	ENDIF
	833	ENDIF
	834	WRITE ( io, 345 ) output_format
	835	WRITE ( io, 341 ) dt_dots
	836	ENDIF
	837
	838	#if defined( __dvrp_graphics )
	839	!
	840	!-- Dvrp-output
	841	IF ( dt_dvrp /= 9999999.9 ) THEN
	842	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
	843	TRIM( dvrp_username ), TRIM( dvrp_directory )
	844	i = 1
	845	l = 0
	846	DO WHILE ( mode_dvrp(i) /= ' ' )
	847	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
	848	READ ( mode_dvrp(i), '(10X,I1)' ) j
	849	l = l + 1
	850	IF ( do3d(0,j) /= ' ' ) THEN
	851	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l)
	852	ENDIF
	853	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
	854	READ ( mode_dvrp(i), '(6X,I1)' ) j
	855	IF ( do2d(0,j) /= ' ' ) WRITE ( io, 362 ) TRIM( do2d(0,j) )
	856	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
	857	WRITE ( io, 363 )
	858	ENDIF
	859	i = i + 1
	860	ENDDO
	861	ENDIF
	862	#endif
	863
	864	#if defined( __spectra )
	865	!
	866	!-- Spectra output
	867	IF ( dt_dosp /= 9999999.9 ) THEN
	868	WRITE ( io, 370 )
	869
	870	output_format = ''
	871	IF ( netcdf_output ) THEN
	872	IF ( netcdf_64bit ) THEN
	873	output_format = 'netcdf (64 bit offset)'
	874	ELSE
	875	output_format = 'netcdf'
	876	ENDIF
	877	ENDIF
	878	IF ( profil_output ) THEN
	879	IF ( netcdf_output ) THEN
	880	output_format = TRIM( output_format ) // ' and profil'
	881	ELSE
	882	output_format = 'profil'
	883	ENDIF
	884	ENDIF
	885	WRITE ( io, 345 ) output_format
	886	WRITE ( io, 371 ) dt_dosp
	887	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
	888	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
	889	( spectra_direction(i), i = 1,10 ), &
	890	( comp_spectra_level(i), i = 1,10 ), &
	891	( plot_spectra_level(i), i = 1,10 ), &
	892	averaging_interval_sp, dt_averaging_input_pr
	893	ENDIF
	894	#endif
	895
	896	WRITE ( io, 99 )
	897
	898	!
	899	!-- Physical quantities
	900	WRITE ( io, 400 )
	901
	902	!
	903	!-- Geostrophic parameters
	904	WRITE ( io, 410 ) omega, phi, f, fs
	905
	906	!
	907	!-- Other quantities
	908	WRITE ( io, 411 ) g
[97]	909	IF ( use_reference ) THEN
	910	IF ( ocean ) THEN
	911	WRITE ( io, 412 ) prho_reference
	912	ELSE
	913	WRITE ( io, 413 ) pt_reference
	914	ENDIF
	915	ENDIF
[1]	916
	917	!
	918	!-- Cloud physics parameters
	919	IF ( cloud_physics ) THEN
[57]	920	WRITE ( io, 415 )
	921	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
[1]	922	ENDIF
	923
	924	!-- Profile of the geostrophic wind (component ug)
	925	!-- Building output strings
	926	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
	927	gradients = '------'
	928	slices = ' 0'
	929	coordinates = ' 0.0'
	930	i = 1
	931	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
	932
	933	WRITE (coor_chr,'(F6.2,4X)') ug(ug_vertical_gradient_level_ind(i))
	934	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
	935
	936	WRITE (coor_chr,'(F6.2,4X)') ug_vertical_gradient(i)
	937	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	938
	939	WRITE (coor_chr,'(I6,4X)') ug_vertical_gradient_level_ind(i)
	940	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	941
	942	WRITE (coor_chr,'(F6.1,4X)') ug_vertical_gradient_level(i)
	943	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	944
	945	i = i + 1
	946	ENDDO
	947
	948	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
	949	TRIM( gradients ), TRIM( slices )
	950
	951	!-- Profile of the geostrophic wind (component vg)
	952	!-- Building output strings
	953	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
	954	gradients = '------'
	955	slices = ' 0'
	956	coordinates = ' 0.0'
	957	i = 1
	958	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
	959
	960	WRITE (coor_chr,'(F6.2,4X)') vg(vg_vertical_gradient_level_ind(i))
	961	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
	962
	963	WRITE (coor_chr,'(F6.2,4X)') vg_vertical_gradient(i)
	964	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	965
	966	WRITE (coor_chr,'(I6,4X)') vg_vertical_gradient_level_ind(i)
	967	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	968
	969	WRITE (coor_chr,'(F6.1,4X)') vg_vertical_gradient_level(i)
	970	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	971
	972	i = i + 1
	973	ENDDO
	974
	975	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
	976	TRIM( gradients ), TRIM( slices )
	977
	978	!
	979	!-- Initial temperature profile
	980	!-- Building output strings, starting with surface temperature
	981	WRITE ( temperatures, '(F6.2)' ) pt_surface
	982	gradients = '------'
	983	slices = ' 0'
	984	coordinates = ' 0.0'
	985	i = 1
	986	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
	987
[94]	988	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
	989	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
[1]	990
[94]	991	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
	992	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
[1]	993
[94]	994	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
	995	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
[1]	996
[94]	997	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
	998	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
[1]	999
	1000	i = i + 1
	1001	ENDDO
	1002
	1003	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
	1004	TRIM( gradients ), TRIM( slices )
	1005
	1006	!
	1007	!-- Initial humidity profile
	1008	!-- Building output strings, starting with surface humidity
[75]	1009	IF ( humidity .OR. passive_scalar ) THEN
[1]	1010	WRITE ( temperatures, '(E8.1)' ) q_surface
	1011	gradients = '--------'
	1012	slices = ' 0'
	1013	coordinates = ' 0.0'
	1014	i = 1
	1015	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
	1016
	1017	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
	1018	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1019
	1020	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
	1021	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1022
	1023	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
	1024	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1025
	1026	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
	1027	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1028
	1029	i = i + 1
	1030	ENDDO
	1031
[75]	1032	IF ( humidity ) THEN
[1]	1033	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
	1034	TRIM( gradients ), TRIM( slices )
	1035	ELSE
	1036	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
	1037	TRIM( gradients ), TRIM( slices )
	1038	ENDIF
	1039	ENDIF
	1040
	1041	!
[97]	1042	!-- Initial salinity profile
	1043	!-- Building output strings, starting with surface salinity
	1044	IF ( ocean ) THEN
	1045	WRITE ( temperatures, '(F6.2)' ) sa_surface
	1046	gradients = '------'
	1047	slices = ' 0'
	1048	coordinates = ' 0.0'
	1049	i = 1
	1050	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
	1051
	1052	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
	1053	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1054
	1055	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
	1056	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1057
	1058	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
	1059	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1060
	1061	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
	1062	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1063
	1064	i = i + 1
	1065	ENDDO
	1066
	1067	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
	1068	TRIM( gradients ), TRIM( slices )
	1069	ENDIF
	1070
	1071	!
[1]	1072	!-- LES / turbulence parameters
	1073	WRITE ( io, 450 )
	1074
	1075	!--
	1076	! ... LES-constants used must still be added here
	1077	!--
	1078	IF ( constant_diffusion ) THEN
	1079	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
	1080	prandtl_number
	1081	ENDIF
	1082	IF ( .NOT. constant_diffusion) THEN
	1083	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
	1084	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
	1085	IF ( adjust_mixing_length .AND. prandtl_layer ) WRITE ( io, 452 )
	1086	ENDIF
	1087
	1088	!
	1089	!-- Special actions during the run
	1090	WRITE ( io, 470 )
	1091	IF ( create_disturbances ) THEN
	1092	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
	1093	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
	1094	zu(disturbance_level_ind_t), disturbance_level_ind_t
	1095	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	1096	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
	1097	ELSE
	1098	WRITE ( io, 473 ) disturbance_energy_limit
	1099	ENDIF
	1100	WRITE ( io, 474 ) TRIM( random_generator )
	1101	ENDIF
	1102	IF ( pt_surface_initial_change /= 0.0 ) THEN
	1103	WRITE ( io, 475 ) pt_surface_initial_change
	1104	ENDIF
[75]	1105	IF ( humidity .AND. q_surface_initial_change /= 0.0 ) THEN
[1]	1106	WRITE ( io, 476 ) q_surface_initial_change
	1107	ENDIF
	1108	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
	1109	WRITE ( io, 477 ) q_surface_initial_change
	1110	ENDIF
	1111
[60]	1112	IF ( particle_advection ) THEN
[1]	1113	!
[60]	1114	!-- Particle attributes
	1115	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
	1116	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
	1117	end_time_prel
	1118	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
	1119	IF ( random_start_position ) WRITE ( io, 481 )
	1120	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
	1121	WRITE ( io, 495 ) total_number_of_particles
	1122	IF ( .NOT. vertical_particle_advection ) WRITE ( io, 482 )
	1123	IF ( maximum_number_of_tailpoints /= 0 ) THEN
	1124	WRITE ( io, 483 ) maximum_number_of_tailpoints
	1125	IF ( minimum_tailpoint_distance /= 0 ) THEN
	1126	WRITE ( io, 484 ) total_number_of_tails, &
	1127	minimum_tailpoint_distance, &
	1128	maximum_tailpoint_age
	1129	ENDIF
[1]	1130	ENDIF
[60]	1131	IF ( dt_write_particle_data /= 9999999.9 ) THEN
	1132	WRITE ( io, 485 ) dt_write_particle_data
	1133	output_format = ''
	1134	IF ( netcdf_output ) THEN
	1135	IF ( netcdf_64bit ) THEN
	1136	output_format = 'netcdf (64 bit offset) and binary'
	1137	ELSE
	1138	output_format = 'netcdf and binary'
	1139	ENDIF
[1]	1140	ELSE
[60]	1141	output_format = 'binary'
[1]	1142	ENDIF
[60]	1143	WRITE ( io, 345 ) output_format
[1]	1144	ENDIF
[60]	1145	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
	1146	IF ( write_particle_statistics ) WRITE ( io, 486 )
[1]	1147
[60]	1148	WRITE ( io, 487 ) number_of_particle_groups
[1]	1149
[60]	1150	DO i = 1, number_of_particle_groups
	1151	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
	1152	WRITE ( io, 490 ) i, 0.0
	1153	WRITE ( io, 492 )
[1]	1154	ELSE
[60]	1155	WRITE ( io, 490 ) i, radius(i)
	1156	IF ( density_ratio(i) /= 0.0 ) THEN
	1157	WRITE ( io, 491 ) density_ratio(i)
	1158	ELSE
	1159	WRITE ( io, 492 )
	1160	ENDIF
[1]	1161	ENDIF
[60]	1162	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
	1163	pdx(i), pdy(i), pdz(i)
	1164	ENDDO
[1]	1165
[60]	1166	ENDIF
[1]	1167
[60]	1168
[1]	1169	!
	1170	!-- Parameters of 1D-model
	1171	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
	1172	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
	1173	mixing_length_1d, dissipation_1d
	1174	IF ( damp_level_ind_1d /= nzt+1 ) THEN
	1175	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
	1176	ENDIF
	1177	ENDIF
	1178
	1179	!
	1180	!-- User-defined informations
	1181	CALL user_header( io )
	1182
	1183	WRITE ( io, 99 )
	1184
	1185	!
	1186	!-- Write buffer contents to disc immediately
[82]	1187	CALL local_flush( io )
[1]	1188
	1189	!
	1190	!-- Here the FORMATs start
	1191
	1192	99 FORMAT (1X,78('-'))
[97]	1193	100 FORMAT (/1X,'*************************',11X,42('-')/ &
[75]	1194	1X,'* ',A,' *',11X,A/ &
[97]	1195	1X,'*************************',11X,42('-')// &
[1]	1196	' Date: ',A8,11X,'Run: ',A20/ &
	1197	' Time: ',A8,11X,'Run-No.: ',I2.2/ &
	1198	' Run on host: ',A10)
	1199	#if defined( __parallel )
	1200	101 FORMAT (' Number of PEs:',7X,I4,11X,'Processor grid (x,y): (',I3,',',I3, &
	1201	')',1X,A)
	1202	102 FORMAT (' Number of PEs:',7X,I4,11X,'Tasks:',I4,' threads per task:',I4/ &
	1203	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
	1204	103 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
	1205	104 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
	1206	37X,'because the job is running on an SMP-cluster')
	1207	105 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
	1208	#endif
	1209	110 FORMAT (/' Numerical Schemes:'/ &
	1210	' -----------------'/)
	1211	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
	1212	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
	1213	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
	1214	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
	1215	' or Upstream')
	1216	114 FORMAT (' --> Momentum advection via Upstream-Spline-Scheme')
	1217	115 FORMAT (' Tendencies are smoothed via Long-Filter with factor ',F5.3)
	1218	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
	1219	' or Upstream')
	1220	117 FORMAT (' --> Scalar advection via Upstream-Spline-Scheme')
	1221	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
	1222	119 FORMAT (' --> Galilei-Transform applied to horizontal advection', &
	1223	' Translation velocity = ',A/ &
	1224	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
	1225	120 FORMAT (' --> Time differencing scheme: leapfrog only (no euler in case', &
	1226	' of timestep changes)')
	1227	121 FORMAT (' --> Time differencing scheme: leapfrog + euler in case of', &
	1228	' timestep changes')
	1229	122 FORMAT (' --> Time differencing scheme: ',A)
	1230	123 FORMAT (' --> Rayleigh-Damping active, starts above z = ',F8.2,' m'/ &
	1231	' maximum damping coefficient: ',F5.3, ' 1/s')
	1232	124 FORMAT (' Spline-overshoots are being suppressed')
	1233	125 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
	1234	' of'/ &
	1235	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
	1236	126 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
	1237	' of'/ &
	1238	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
	1239	127 FORMAT (' The following absolute overshoot differences are tolerated:'/&
	1240	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
	1241	128 FORMAT (' The following absolute overshoot differences are tolerated:'/&
	1242	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
	1243	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
	1244	130 FORMAT (' --> Additional prognostic equation for the total water content')
	1245	131 FORMAT (' --> Parameterization of condensation processes via (0%-or100%)')
	1246	132 FORMAT (' --> Parameterization of long-wave radiation processes via'/ &
	1247	' effective emissivity scheme')
	1248	133 FORMAT (' --> Precipitation parameterization via Kessler-Scheme')
	1249	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
	1250	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
	1251	A,'-cycle)'/ &
	1252	' number of grid levels: ',I2/ &
	1253	' Gauss-Seidel red/black iterations: ',I2)
	1254	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1255	I3,')')
	1256	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
	1257	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1258	I3,')'/ &
	1259	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
	1260	I3,')')
	1261	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
[63]	1262	139 FORMAT (' --> Loop optimization method: ',A)
[1]	1263	140 FORMAT (' maximum residual allowed: ',E10.3)
	1264	141 FORMAT (' fixed number of multigrid cycles: ',I4)
	1265	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
	1266	'step')
[87]	1267	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
	1268	'kinetic energy')
[1]	1269	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
	1270	'conserved')
	1271	200 FORMAT (//' Run time and time step information:'/ &
	1272	' ----------------------------------'/)
	1273	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
	1274	' CFL-factor: ',F4.2)
	1275	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
	1276	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
	1277	' End time: ',F9.3,' s')
	1278	204 FORMAT ( A,F9.3,' s')
	1279	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
	1280	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
	1281	' CPU-time used: ',F9.3,' s per timestep: ', &
	1282	' ',F9.3,' s'/ &
	1283	' per second of simulated tim', &
	1284	'e: ',F9.3,' s')
	1285	250 FORMAT (//' Computational grid and domain size:'/ &
	1286	' ----------------------------------'// &
	1287	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
	1288	' m dz = ',F7.3,' m'/ &
	1289	' Domain size: x = ',F10.3,' m y = ',F10.3, &
	1290	' m z(u) = ',F10.3,' m'/)
	1291	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
	1292	' factor: ',F5.3/ &
	1293	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
	1294	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
	1295	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
	1296	255 FORMAT (' Subdomains have equal size')
	1297	256 FORMAT (' Subdomains at the upper edges of the virtual processor grid ', &
	1298	'have smaller sizes'/ &
	1299	' Size of smallest subdomain: ( ',I4,', ',I4,', ',I4,')')
	1300	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
	1301	' degrees')
	1302	270 FORMAT (//' Topography informations:'/ &
	1303	' -----------------------'// &
	1304	1X,'Topography: ',A)
	1305	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
	1306	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
	1307	' / ',I4)
	1308	300 FORMAT (//' Boundary conditions:'/ &
	1309	' -------------------'// &
	1310	' p uv ', &
	1311	' pt'// &
	1312	' B. bound.: ',A/ &
	1313	' T. bound.: ',A)
[97]	1314	301 FORMAT (/' ',A// &
[1]	1315	' B. bound.: ',A/ &
	1316	' T. bound.: ',A)
[19]	1317	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
	1318	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
	1319	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
	1320	'computational u,v-level:'// &
[1]	1321	' zp = ',F6.2,' m z0 = ',F6.4,' m kappa = ',F4.2/ &
	1322	' Rif value range: ',F6.2,' <= rif <=',F6.2)
[97]	1323	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
[1]	1324	307 FORMAT (' Heatflux has a random normal distribution')
	1325	308 FORMAT (' Predefined surface temperature')
[97]	1326	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
[1]	1327	310 FORMAT (//' 1D-Model:'// &
	1328	' Rif value range: ',F6.2,' <= rif <=',F6.2)
	1329	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
	1330	312 FORMAT (' Predefined surface humidity')
	1331	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
	1332	314 FORMAT (' Predefined scalar value at the surface')
[19]	1333	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
[1]	1334	317 FORMAT (//' Lateral boundaries:'/ &
	1335	' left/right: ',A/ &
	1336	' north/south: ',A)
	1337	318 FORMAT (/' outflow damping layer width: ',I3,' gridpoints with km_', &
	1338	'max =',F5.1,' m**2/s')
	1339	320 FORMAT (//' List output:'/ &
	1340	' -----------'// &
	1341	' 1D-Profiles:'/ &
	1342	' Output every ',F8.2,' s')
	1343	321 FORMAT (' Time averaged over ',F8.2,' s'/ &
	1344	' Averaging input every ',F8.2,' s')
	1345	330 FORMAT (//' Data output:'/ &
	1346	' -----------'/)
	1347	331 FORMAT (/' 1D-Profiles:')
	1348	332 FORMAT (/' ',A)
	1349	333 FORMAT (' Output every ',F8.2,' s',/ &
	1350	' Time averaged over ',F8.2,' s'/ &
	1351	' Averaging input every ',F8.2,' s')
	1352	334 FORMAT (/' 2D-Arrays',A,':')
	1353	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1354	' Output every ',F8.2,' s ',A/ &
	1355	' Cross sections at ',A1,' = ',A/ &
	1356	' scalar-coordinates: ',A,' m'/)
	1357	336 FORMAT (/' 3D-Arrays',A,':')
	1358	337 FORMAT (/' Arrays: ',A/ &
	1359	' Output every ',F8.2,' s ',A/ &
	1360	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
	1361	338 FORMAT (' Compressed data output'/ &
	1362	' Decimal precision: ',A/)
	1363	339 FORMAT (' No output during initial ',F8.2,' s')
	1364	340 FORMAT (/' Time series:')
	1365	341 FORMAT (' Output every ',F8.2,' s'/)
	1366	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1367	' Output every ',F8.2,' s ',A/ &
	1368	' Time averaged over ',F8.2,' s'/ &
	1369	' Averaging input every ',F8.2,' s'/ &
	1370	' Cross sections at ',A1,' = ',A/ &
	1371	' scalar-coordinates: ',A,' m'/)
	1372	343 FORMAT (/' Arrays: ',A/ &
	1373	' Output every ',F8.2,' s ',A/ &
	1374	' Time averaged over ',F8.2,' s'/ &
	1375	' Averaging input every ',F8.2,' s'/ &
	1376	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
	1377	345 FORMAT (' Output format: ',A/)
	1378	#if defined( __dvrp_graphics )
	1379	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
	1380	' Output every ',F7.1,' s'/ &
	1381	' Output mode: ',A/ &
	1382	' Host / User: ',A,' / ',A/ &
	1383	' Directory: ',A// &
	1384	' The sequence contains:')
	1385	361 FORMAT (' Isosurface of ',A,' Threshold value: ', E12.3)
	1386	362 FORMAT (' Sectional plane ',A)
	1387	363 FORMAT (' Particles')
	1388	#endif
	1389	#if defined( __spectra )
	1390	370 FORMAT (' Spectra:')
	1391	371 FORMAT (' Output every ',F7.1,' s'/)
	1392	372 FORMAT (' Arrays: ', 10(A5,',')/ &
	1393	' Directions: ', 10(A5,',')/ &
	1394	' height levels k = ', 9(I3,','),I3,'.'/ &
	1395	' height levels selected for standard plot:'/ &
	1396	' k = ', 9(I3,','),I3,'.'/ &
	1397	' Time averaged over ', F7.1, ' s,' / &
	1398	' Profiles for the time averaging are taken every ', &
	1399	F6.1,' s')
	1400	#endif
	1401	400 FORMAT (//' Physical quantities:'/ &
	1402	' -------------------'/)
	1403	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
	1404	' Geograph. latitude : phi = ',F4.1,' degr'/ &
	1405	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
	1406	' f* = ',F9.6,' 1/s')
	1407	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
[97]	1408	412 FORMAT (/' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
	1409	413 FORMAT (/' Reference temperature in buoyancy terms: ',F8.4,' K')
[57]	1410	415 FORMAT (/' Cloud physics parameters:'/ &
[1]	1411	' ------------------------'/)
[57]	1412	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
[1]	1413	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
	1414	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
	1415	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
	1416	' Vapourization heat : L_v = ',E8.2,' J/kg')
	1417	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
	1418	' Height: ',A,' m'/ &
	1419	' Temperature: ',A,' K'/ &
	1420	' Gradient: ',A,' K/100m'/ &
	1421	' Gridpoint: ',A)
	1422	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
	1423	' Height: ',A,' m'/ &
	1424	' Humidity: ',A,' kg/kg'/ &
	1425	' Gradient: ',A,' (kg/kg)/100m'/ &
	1426	' Gridpoint: ',A)
	1427	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
	1428	' Height: ',A,' m'/ &
	1429	' Scalar concentration: ',A,' kg/m**3'/ &
	1430	' Gradient: ',A,' (kg/m**3)/100m'/ &
	1431	' Gridpoint: ',A)
	1432	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
	1433	' Height: ',A,' m'/ &
	1434	' ug: ',A,' m/s'/ &
	1435	' Gradient: ',A,' 1/100s'/ &
	1436	' Gridpoint: ',A)
	1437	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
	1438	' Height: ',A,' m'/ &
[97]	1439	' vg: ',A,' m/s'/ &
[1]	1440	' Gradient: ',A,' 1/100s'/ &
	1441	' Gridpoint: ',A)
[97]	1442	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
	1443	' Height: ',A,' m'/ &
	1444	' Salinity: ',A,' psu'/ &
	1445	' Gradient: ',A,' psu/100m'/ &
	1446	' Gridpoint: ',A)
[1]	1447	450 FORMAT (//' LES / Turbulence quantities:'/ &
	1448	' ---------------------------'/)
	1449	451 FORMAT (' Diffusion coefficients are constant:'/ &
	1450	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
	1451	452 FORMAT (' Mixing length is limited to the Prandtl mixing lenth.')
	1452	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
	1453	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
	1454	470 FORMAT (//' Actions during the simulation:'/ &
	1455	' -----------------------------'/)
[94]	1456	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
	1457	' Disturbance amplitude : ',F4.2, ' m/s'/ &
	1458	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
	1459	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
[1]	1460	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
	1461	' to i/j =',I4)
	1462	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
	1463	1X,F5.3, ' m2/s2')
	1464	474 FORMAT (' Random number generator used : ',A/)
	1465	475 FORMAT (' The surface temperature is increased (or decreased, ', &
	1466	'respectively, if'/ &
	1467	' the value is negative) by ',F5.2,' K at the beginning of the',&
	1468	' 3D-simulation'/)
	1469	476 FORMAT (' The surface humidity is increased (or decreased, ',&
	1470	'respectively, if the'/ &
	1471	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
	1472	' the 3D-simulation'/)
	1473	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
	1474	'respectively, if the'/ &
	1475	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
	1476	' the 3D-simulation'/)
	1477	480 FORMAT (' Particles:'/ &
	1478	' ---------'// &
	1479	' Particle advection is active (switched on at t = ', F7.1, &
	1480	' s)'/ &
	1481	' Start of new particle generations every ',F6.1,' s'/ &
	1482	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
	1483	' bottom: ', A, ' top: ', A/&
	1484	' Maximum particle age: ',F9.1,' s'/ &
	1485	' Advection stopped at t = ',F9.1,' s'/)
	1486	481 FORMAT (' Particles have random start positions'/)
	1487	482 FORMAT (' Particles are advected only horizontally'/)
	1488	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
	1489	484 FORMAT (' Number of tails of the total domain: ',I10/ &
	1490	' Minimum distance between tailpoints: ',F8.2,' m'/ &
	1491	' Maximum age of the end of the tail: ',F8.2,' s')
	1492	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
	1493	486 FORMAT (' Particle statistics are written on file'/)
	1494	487 FORMAT (' Number of particle groups: ',I2/)
	1495	488 FORMAT (' SGS velocity components are used for particle advection'/ &
	1496	' minimum timestep for advection: ', F7.5/)
	1497	489 FORMAT (' Number of particles simultaneously released at each ', &
	1498	'point: ', I5/)
	1499	490 FORMAT (' Particle group ',I2,':'/ &
	1500	' Particle radius: ',E10.3, 'm')
	1501	491 FORMAT (' Particle inertia is activated'/ &
	1502	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
	1503	492 FORMAT (' Particles are advected only passively (no inertia)'/)
	1504	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
	1505	' y:',F8.1,' - ',F8.1,' m'/&
	1506	' z:',F8.1,' - ',F8.1,' m'/&
	1507	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
	1508	' m dz = ',F8.1,' m'/)
	1509	494 FORMAT (' Output of particle time series in NetCDF format every ', &
	1510	F8.2,' s'/)
	1511	495 FORMAT (' Number of particles in total domain: ',I10/)
	1512	500 FORMAT (//' 1D-Model parameters:'/ &
	1513	' -------------------'// &
	1514	' Simulation time: ',F8.1,' s'/ &
	1515	' Run-controll output every: ',F8.1,' s'/ &
	1516	' Vertical profile output every: ',F8.1,' s'/ &
	1517	' Mixing length calculation: ',A/ &
	1518	' Dissipation calculation: ',A/)
	1519	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
	1520
	1521
	1522	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |