!> @file global_min_max.f90 !------------------------------------------------------------------------------! ! This file is part of the PALM model system. ! ! PALM is free software: you can redistribute it and/or modify it under the ! terms of the GNU General Public License as published by the Free Software ! Foundation, either version 3 of the License, or (at your option) any later ! version. ! ! PALM is distributed in the hope that it will be useful, but WITHOUT ANY ! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR ! A PARTICULAR PURPOSE. See the GNU General Public License for more details. ! ! You should have received a copy of the GNU General Public License along with ! PALM. If not, see . ! ! Copyright 1997-2018 Leibniz Universitaet Hannover !------------------------------------------------------------------------------! ! ! Current revisions: ! ------------------ ! ! ! Former revisions: ! ----------------- ! $Id: global_min_max.f90 2718 2018-01-02 08:49:38Z scharf $ ! Corrected "Former revisions" section ! ! 2696 2017-12-14 17:12:51Z kanani ! Change in file header (GPL part) ! ! 2101 2017-01-05 16:42:31Z suehring ! ! 2000 2016-08-20 18:09:15Z knoop ! Forced header and separation lines into 80 columns ! ! 1682 2015-10-07 23:56:08Z knoop ! Code annotations made doxygen readable ! ! 1353 2014-04-08 15:21:23Z heinze ! REAL constants provided with KIND-attribute ! ! 1320 2014-03-20 08:40:49Z raasch ! ONLY-attribute added to USE-statements, ! kind-parameters added to all INTEGER and REAL declaration statements, ! kinds are defined in new module kinds, ! revision history before 2012 removed, ! comment fields (!:) to be used for variable explanations added to ! all variable declaration statements ! ! 1188 2013-06-20 12:00:08Z heinze ! Bugfix in modes 'min' and 'max': x and z component were interchanged ! ! 1036 2012-10-22 13:43:42Z raasch ! code put under GPL (PALM 3.9) ! ! 866 2012-03-28 06:44:41Z raasch ! new mode "absoff" accounts for an offset in the respective array ! ! Revision 1.1 1997/07/24 11:14:03 raasch ! Initial revision ! ! ! Description: ! ------------ !> Determine the array minimum/maximum and the corresponding indices. !------------------------------------------------------------------------------! SUBROUTINE global_min_max( i1, i2, j1, j2, k1, k2, ar, mode, offset, value, & value_ijk, value1, value1_ijk ) USE indices, & ONLY: nbgp, ny, nx USE kinds USE pegrid IMPLICIT NONE CHARACTER (LEN=*) :: mode !< INTEGER(iwp) :: i !< INTEGER(iwp) :: i1 !< INTEGER(iwp) :: i2 !< INTEGER(iwp) :: id_fmax !< INTEGER(iwp) :: id_fmin !< INTEGER(iwp) :: j !< INTEGER(iwp) :: j1 !< INTEGER(iwp) :: j2 !< INTEGER(iwp) :: k !< INTEGER(iwp) :: k1 !< INTEGER(iwp) :: k2 !< INTEGER(iwp) :: fmax_ijk(3) !< INTEGER(iwp) :: fmax_ijk_l(3) !< INTEGER(iwp) :: fmin_ijk(3) !< INTEGER(iwp) :: fmin_ijk_l(3) !< INTEGER(iwp) :: value_ijk(3) !< INTEGER(iwp), OPTIONAL :: value1_ijk(3) !< REAL(wp) :: offset !< REAL(wp) :: value !< REAL(wp) :: ar(i1:i2,j1:j2,k1:k2) !< #if defined( __ibm ) REAL(sp) :: fmax(2) !< REAL(sp) :: fmax_l(2) !< REAL(sp) :: fmin(2) !< REAL(sp) :: fmin_l(2) !< ! on 32bit-machines MPI_2REAL must not be replaced ! by MPI_2DOUBLE_PRECISION #else REAL(wp) :: fmax(2) !< REAL(wp) :: fmax_l(2) !< REAL(wp) :: fmin(2) !< REAL(wp) :: fmin_l(2) !< #endif REAL(wp), OPTIONAL :: value1 !< ! !-- Determine array minimum IF ( mode == 'min' .OR. mode == 'minmax' ) THEN ! !-- Determine the local minimum fmin_ijk_l = MINLOC( ar ) fmin_ijk_l(1) = i1 + fmin_ijk_l(1) - 1 ! MINLOC assumes lowerbound = 1 fmin_ijk_l(2) = j1 + fmin_ijk_l(2) - nbgp fmin_ijk_l(3) = k1 + fmin_ijk_l(3) - nbgp fmin_l(1) = ar(fmin_ijk_l(1),fmin_ijk_l(2),fmin_ijk_l(3)) #if defined( __parallel ) fmin_l(2) = myid IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr ) CALL MPI_ALLREDUCE( fmin_l, fmin, 1, MPI_2REAL, MPI_MINLOC, comm2d, & ierr ) ! !-- Determine the global minimum. Result stored on PE0. id_fmin = fmin(2) IF ( id_fmin /= 0 ) THEN IF ( myid == 0 ) THEN CALL MPI_RECV( fmin_ijk, 3, MPI_INTEGER, id_fmin, 0, comm2d, & status, ierr ) ELSEIF ( myid == id_fmin ) THEN CALL MPI_SEND( fmin_ijk_l, 3, MPI_INTEGER, 0, 0, comm2d, ierr ) ENDIF ELSE fmin_ijk = fmin_ijk_l ENDIF ! !-- Send the indices of the just determined array minimum to other PEs CALL MPI_BCAST( fmin_ijk, 3, MPI_INTEGER, 0, comm2d, ierr ) #else fmin(1) = fmin_l(1) fmin_ijk = fmin_ijk_l #endif ENDIF ! !-- Determine array maximum IF ( mode == 'max' .OR. mode == 'minmax' ) THEN ! !-- Determine the local maximum fmax_ijk_l = MAXLOC( ar ) fmax_ijk_l(1) = i1 + fmax_ijk_l(1) - 1 ! MAXLOC assumes lowerbound = 1 fmax_ijk_l(2) = j1 + fmax_ijk_l(2) - nbgp fmax_ijk_l(3) = k1 + fmax_ijk_l(3) - nbgp fmax_l(1) = ar(fmax_ijk_l(1),fmax_ijk_l(2),fmax_ijk_l(3)) #if defined( __parallel ) fmax_l(2) = myid IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr ) CALL MPI_ALLREDUCE( fmax_l, fmax, 1, MPI_2REAL, MPI_MAXLOC, comm2d, & ierr ) ! !-- Determine the global maximum. Result stored on PE0. id_fmax = fmax(2) IF ( id_fmax /= 0 ) THEN IF ( myid == 0 ) THEN CALL MPI_RECV( fmax_ijk, 3, MPI_INTEGER, id_fmax, 0, comm2d, & status, ierr ) ELSEIF ( myid == id_fmax ) THEN CALL MPI_SEND( fmax_ijk_l, 3, MPI_INTEGER, 0, 0, comm2d, ierr ) ENDIF ELSE fmax_ijk = fmax_ijk_l ENDIF ! !-- send the indices of the just determined array maximum to other PEs CALL MPI_BCAST( fmax_ijk, 3, MPI_INTEGER, 0, comm2d, ierr ) #else fmax(1) = fmax_l(1) fmax_ijk = fmax_ijk_l #endif ENDIF ! !-- Determine absolute array maximum IF ( mode == 'abs' ) THEN ! !-- Determine the local absolut maximum fmax_l(1) = 0.0_wp fmax_ijk_l(1) = i1 fmax_ijk_l(2) = j1 fmax_ijk_l(3) = k1 DO k = k1, k2 DO j = j1, j2 DO i = i1, i2 IF ( ABS( ar(i,j,k) ) > fmax_l(1) ) THEN fmax_l(1) = ABS( ar(i,j,k) ) fmax_ijk_l(1) = i fmax_ijk_l(2) = j fmax_ijk_l(3) = k ENDIF ENDDO ENDDO ENDDO ! !-- Set a flag in case that the determined value is negative. !-- A constant offset has to be subtracted in order to handle the special !-- case i=0 correctly IF ( ar(fmax_ijk_l(1),fmax_ijk_l(2),fmax_ijk_l(3)) < 0.0_wp ) THEN fmax_ijk_l(1) = -fmax_ijk_l(1) - 10 ENDIF #if defined( __parallel ) fmax_l(2) = myid IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr ) CALL MPI_ALLREDUCE( fmax_l, fmax, 1, MPI_2REAL, MPI_MAXLOC, comm2d, & ierr ) ! !-- Determine the global absolut maximum. Result stored on PE0. id_fmax = fmax(2) IF ( id_fmax /= 0 ) THEN IF ( myid == 0 ) THEN CALL MPI_RECV( fmax_ijk, 3, MPI_INTEGER, id_fmax, 0, comm2d, & status, ierr ) ELSEIF ( myid == id_fmax ) THEN CALL MPI_SEND( fmax_ijk_l, 3, MPI_INTEGER, 0, 0, comm2d, ierr ) ENDIF ELSE fmax_ijk = fmax_ijk_l ENDIF ! !-- Send the indices of the just determined absolut maximum to other PEs CALL MPI_BCAST( fmax_ijk, 3, MPI_INTEGER, 0, comm2d, ierr ) #else fmax(1) = fmax_l(1) fmax_ijk = fmax_ijk_l #endif ENDIF ! !-- Determine absolute maximum of ( array - offset ) IF ( mode == 'absoff' ) THEN ! !-- Determine the local absolut maximum fmax_l(1) = 0.0_wp fmax_ijk_l(1) = i1 fmax_ijk_l(2) = j1 fmax_ijk_l(3) = k1 DO k = k1, k2 DO j = j1, j2 ! !-- Attention: the lowest gridpoint is excluded here, because there !-- --------- is no advection at nzb=0 and mode 'absoff' is only !-- used for calculating u,v extrema for CFL-criteria DO i = i1+1, i2 IF ( ABS( ar(i,j,k) - offset ) > fmax_l(1) ) THEN fmax_l(1) = ABS( ar(i,j,k) - offset ) fmax_ijk_l(1) = i fmax_ijk_l(2) = j fmax_ijk_l(3) = k ENDIF ENDDO ENDDO ENDDO ! !-- Set a flag in case that the determined value is negative. !-- A constant offset has to be subtracted in order to handle the special !-- case i=0 correctly IF ( ar(fmax_ijk_l(1),fmax_ijk_l(2),fmax_ijk_l(3)) < 0.0_wp ) THEN fmax_ijk_l(1) = -fmax_ijk_l(1) - 10 ENDIF #if defined( __parallel ) fmax_l(2) = myid IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr ) CALL MPI_ALLREDUCE( fmax_l, fmax, 1, MPI_2REAL, MPI_MAXLOC, comm2d, & ierr ) ! !-- Determine the global absolut maximum. Result stored on PE0. id_fmax = fmax(2) IF ( id_fmax /= 0 ) THEN IF ( myid == 0 ) THEN CALL MPI_RECV( fmax_ijk, 3, MPI_INTEGER, id_fmax, 0, comm2d, & status, ierr ) ELSEIF ( myid == id_fmax ) THEN CALL MPI_SEND( fmax_ijk_l, 3, MPI_INTEGER, 0, 0, comm2d, ierr ) ENDIF ELSE fmax_ijk = fmax_ijk_l ENDIF ! !-- Send the indices of the just determined absolut maximum to other PEs CALL MPI_BCAST( fmax_ijk, 3, MPI_INTEGER, 0, comm2d, ierr ) #else fmax(1) = fmax_l(1) fmax_ijk = fmax_ijk_l #endif ENDIF ! !-- Determine output parameters SELECT CASE( mode ) CASE( 'min' ) value = fmin(1) value_ijk = fmin_ijk CASE( 'max' ) value = fmax(1) value_ijk = fmax_ijk CASE( 'minmax' ) value = fmin(1) value_ijk = fmin_ijk value1 = fmax(1) value1_ijk = fmax_ijk CASE( 'abs', 'absoff' ) value = fmax(1) value_ijk = fmax_ijk IF ( fmax_ijk(1) < 0 ) THEN value = -value value_ijk(1) = -value_ijk(1) - 10 !??? ENDIF END SELECT ! !-- Limit index values to the range 0..nx, 0..ny IF ( value_ijk(3) < 0 ) value_ijk(3) = nx +1 + value_ijk(3) IF ( value_ijk(3) > nx ) value_ijk(3) = value_ijk(3) - (nx+1) IF ( value_ijk(2) < 0 ) value_ijk(2) = ny +1 + value_ijk(2) IF ( value_ijk(2) > ny ) value_ijk(2) = value_ijk(2) - (ny+1) END SUBROUTINE global_min_max