!> @file flow_statistics.f90
!------------------------------------------------------------------------------!
! This file is part of the PALM model system.
!
! PALM is free software: you can redistribute it and/or modify it under the
! terms of the GNU General Public License as published by the Free Software
! Foundation, either version 3 of the License, or (at your option) any later
! version.
!
! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
!
! You should have received a copy of the GNU General Public License along with
! PALM. If not, see .
!
! Copyright 1997-2020 Leibniz Universitaet Hannover
!------------------------------------------------------------------------------!
!
! Current revisions:
! ------------------
!
!
! Former revisions:
! -----------------
! $Id: flow_statistics.f90 4521 2020-05-06 11:39:49Z eckhard $
! Rename variable
!
! 4502 2020-04-17 16:14:16Z schwenkel
! Implementation of ice microphysics
!
! 4472 2020-03-24 12:21:00Z Giersch
! Calculations of the Kolmogorov lengt scale eta implemented
!
! 4464 2020-03-17 11:08:46Z Giersch
! Reset last change (r4463)
!
! 4463 2020-03-17 09:27:36Z Giersch
! Calculate horizontally averaged profiles of all velocity components at the
! same place
!
! 4444 2020-03-05 15:59:50Z raasch
! bugfix: cpp-directives for serial mode added
!
! 4442 2020-03-04 19:21:13Z suehring
! Change order of dimension in surface array %frac to allow for better
! vectorization.
!
! 4441 2020-03-04 19:20:35Z suehring
! Introduction of wall_flags_total_0, which currently sets bits based on static
! topography information used in wall_flags_static_0
!
! 4329 2019-12-10 15:46:36Z motisi
! Renamed wall_flags_0 to wall_flags_static_0
!
! 4182 2019-08-22 15:20:23Z scharf
! Corrected "Former revisions" section
!
! 4131 2019-08-02 11:06:18Z monakurppa
! Allow profile output for salsa variables.
!
! 4039 2019-06-18 10:32:41Z suehring
! Correct conversion to kinematic scalar fluxes in case of pw-scheme and
! statistic regions
!
! 3828 2019-03-27 19:36:23Z raasch
! unused variables removed
!
! 3676 2019-01-16 15:07:05Z knoop
! Bugfix, terminate OMP Parallel block
!
! Revision 1.1 1997/08/11 06:15:17 raasch
! Initial revision
!
!
! Description:
! ------------
!> Compute average profiles and further average flow quantities for the different
!> user-defined (sub-)regions. The region indexed 0 is the total model domain.
!>
!> @note For simplicity, nzb_s_inner and nzb_diff_s_inner are being used as a
!> lower vertical index for k-loops for all variables, although strictly
!> speaking the k-loops would have to be split up according to the staggered
!> grid. However, this implies no error since staggered velocity components
!> are zero at the walls and inside buildings.
!------------------------------------------------------------------------------!
SUBROUTINE flow_statistics
USE arrays_3d, &
ONLY: ddzu, ddzw, e, heatflux_output_conversion, hyp, km, kh, &
momentumflux_output_conversion, nc, ni, nr, p, prho, prr, pt, q,&
qc, qi, ql, qr, rho_air, rho_air_zw, rho_ocean, s, &
sa, u, ug, v, vg, vpt, w, w_subs, waterflux_output_conversion, &
zw, d_exner
USE basic_constants_and_equations_mod, &
ONLY: g, lv_d_cp
USE bulk_cloud_model_mod, &
ONLY: bulk_cloud_model, microphysics_morrison, microphysics_seifert, &
microphysics_ice_phase
USE chem_modules, &
ONLY: max_pr_cs
USE control_parameters, &
ONLY: air_chemistry, average_count_pr, cloud_droplets, do_sum, &
dt_3d, humidity, initializing_actions, kolmogorov_length_scale,&
land_surface, large_scale_forcing, large_scale_subsidence, &
max_pr_user, message_string, neutral, ocean_mode, &
passive_scalar, simulated_time, simulated_time_at_begin, &
use_subsidence_tendencies, use_surface_fluxes, use_top_fluxes, &
ws_scheme_mom, ws_scheme_sca, salsa, max_pr_salsa
USE cpulog, &
ONLY: cpu_log, log_point
USE grid_variables, &
ONLY: ddx, ddy
USE indices, &
ONLY: ngp_2dh, ngp_2dh_s_inner, ngp_3d, ngp_3d_inner, nxl, nxr, nyn, &
nys, nzb, nzt, topo_min_level, wall_flags_total_0
#if defined( __parallel )
USE indices, &
ONLY: ngp_sums, ngp_sums_ls
#endif
USE kinds
USE land_surface_model_mod, &
ONLY: m_soil_h, nzb_soil, nzt_soil, t_soil_h
USE lsf_nudging_mod, &
ONLY: td_lsa_lpt, td_lsa_q, td_sub_lpt, td_sub_q, time_vert
USE module_interface, &
ONLY: module_interface_statistics
USE netcdf_interface, &
ONLY: dots_rad, dots_soil, dots_max
USE pegrid
USE radiation_model_mod, &
ONLY: radiation, radiation_scheme, &
rad_lw_in, rad_lw_out, rad_lw_cs_hr, rad_lw_hr, &
rad_sw_in, rad_sw_out, rad_sw_cs_hr, rad_sw_hr
USE statistics
USE surface_mod, &
ONLY : surf_def_h, surf_lsm_h, surf_usm_h
IMPLICIT NONE
INTEGER(iwp) :: i !<
INTEGER(iwp) :: j !<
INTEGER(iwp) :: k !<
INTEGER(iwp) :: ki !<
INTEGER(iwp) :: k_surface_level !<
INTEGER(iwp) :: m !< loop variable over all horizontal wall elements
INTEGER(iwp) :: l !< loop variable over surface facing -- up- or downward-facing
INTEGER(iwp) :: nt !<
!$ INTEGER(iwp) :: omp_get_thread_num !<
INTEGER(iwp) :: sr !<
INTEGER(iwp) :: tn !<
LOGICAL :: first !<
REAL(wp) :: dissipation !< dissipation rate
REAL(wp) :: dptdz_threshold !<
REAL(wp) :: du_dx !< Derivative of u fluctuations with respect to x
REAL(wp) :: du_dy !< Derivative of u fluctuations with respect to y
REAL(wp) :: du_dz !< Derivative of u fluctuations with respect to z
REAL(wp) :: dv_dx !< Derivative of v fluctuations with respect to x
REAL(wp) :: dv_dy !< Derivative of v fluctuations with respect to y
REAL(wp) :: dv_dz !< Derivative of v fluctuations with respect to z
REAL(wp) :: dw_dx !< Derivative of w fluctuations with respect to x
REAL(wp) :: dw_dy !< Derivative of w fluctuations with respect to y
REAL(wp) :: dw_dz !< Derivative of w fluctuations with respect to z
REAL(wp) :: eta !< Kolmogorov length scale
REAL(wp) :: fac !<
REAL(wp) :: flag !<
REAL(wp) :: height !<
REAL(wp) :: pts !<
REAL(wp) :: s11 !< fluctuating rate-of-strain tensor component 11
REAL(wp) :: s21 !< fluctuating rate-of-strain tensor component 21
REAL(wp) :: s31 !< fluctuating rate-of-strain tensor component 31
REAL(wp) :: s12 !< fluctuating rate-of-strain tensor component 12
REAL(wp) :: s22 !< fluctuating rate-of-strain tensor component 22
REAL(wp) :: s32 !< fluctuating rate-of-strain tensor component 32
REAL(wp) :: s13 !< fluctuating rate-of-strain tensor component 13
REAL(wp) :: s23 !< fluctuating rate-of-strain tensor component 23
REAL(wp) :: s33 !< fluctuating rate-of-strain tensor component 33
REAL(wp) :: sums_l_etot !<
REAL(wp) :: ust !<
REAL(wp) :: ust2 !<
REAL(wp) :: u2 !<
REAL(wp) :: vst !<
REAL(wp) :: vst2 !<
REAL(wp) :: v2 !<
REAL(wp) :: w2 !<
REAL(wp) :: dptdz(nzb+1:nzt+1) !<
REAL(wp) :: sums_ll(nzb:nzt+1,2) !<
CALL cpu_log( log_point(10), 'flow_statistics', 'start' )
!
!-- To be on the safe side, check whether flow_statistics has already been
!-- called once after the current time step
IF ( flow_statistics_called ) THEN
message_string = 'flow_statistics is called two times within one ' // &
'timestep'
CALL message( 'flow_statistics', 'PA0190', 1, 2, 0, 6, 0 )
ENDIF
!
!-- Compute statistics for each (sub-)region
DO sr = 0, statistic_regions
!
!-- Initialize (local) summation array
sums_l = 0.0_wp
#ifdef _OPENACC
!$ACC KERNELS PRESENT(sums_l)
sums_l = 0.0_wp
!$ACC END KERNELS
#endif
!
!-- Store sums that have been computed in other subroutines in summation
!-- array
sums_l(:,11,:) = sums_l_l(:,sr,:) ! mixing length from diffusivities
!-- WARNING: next line still has to be adjusted for OpenMP
sums_l(:,21,0) = sums_wsts_bc_l(:,sr) * &
heatflux_output_conversion ! heat flux from advec_s_bc
sums_l(nzb+9,pr_palm,0) = sums_divold_l(sr) ! old divergence from pres
sums_l(nzb+10,pr_palm,0) = sums_divnew_l(sr) ! new divergence from pres
!
!-- When calcuating horizontally-averaged total (resolved- plus subgrid-
!-- scale) vertical fluxes and velocity variances by using commonly-
!-- applied Reynolds-based methods ( e.g. = (w-)*(pt-) )
!-- in combination with the 5th order advection scheme, pronounced
!-- artificial kinks could be observed in the vertical profiles near the
!-- surface. Please note: these kinks were not related to the model truth,
!-- i.e. these kinks are just related to an evaluation problem.
!-- In order avoid these kinks, vertical fluxes and horizontal as well
!-- vertical velocity variances are calculated directly within the advection
!-- routines, according to the numerical discretization, to evaluate the
!-- statistical quantities as they will appear within the prognostic
!-- equations.
!-- Copy the turbulent quantities, evaluated in the advection routines to
!-- the local array sums_l() for further computations.
IF ( ws_scheme_mom .AND. sr == 0 ) THEN
!
!-- According to the Neumann bc for the horizontal velocity components,
!-- the corresponding fluxes has to satisfiy the same bc.
IF ( ocean_mode ) THEN
sums_us2_ws_l(nzt+1,:) = sums_us2_ws_l(nzt,:)
sums_vs2_ws_l(nzt+1,:) = sums_vs2_ws_l(nzt,:)
ENDIF
DO i = 0, threads_per_task-1
!
!-- Swap the turbulent quantities evaluated in advec_ws.
sums_l(:,13,i) = sums_wsus_ws_l(:,i) &
* momentumflux_output_conversion ! w*u*
sums_l(:,15,i) = sums_wsvs_ws_l(:,i) &
* momentumflux_output_conversion ! w*v*
sums_l(:,30,i) = sums_us2_ws_l(:,i) ! u*2
sums_l(:,31,i) = sums_vs2_ws_l(:,i) ! v*2
sums_l(:,32,i) = sums_ws2_ws_l(:,i) ! w*2
sums_l(:,34,i) = sums_l(:,34,i) + 0.5_wp * &
( sums_us2_ws_l(:,i) + sums_vs2_ws_l(:,i) + &
sums_ws2_ws_l(:,i) ) ! e*
ENDDO
ENDIF
IF ( ws_scheme_sca .AND. sr == 0 ) THEN
DO i = 0, threads_per_task-1
sums_l(:,17,i) = sums_wspts_ws_l(:,i) &
* heatflux_output_conversion ! w*pt*
IF ( ocean_mode ) sums_l(:,66,i) = sums_wssas_ws_l(:,i) ! w*sa*
IF ( humidity ) sums_l(:,49,i) = sums_wsqs_ws_l(:,i) &
* waterflux_output_conversion ! w*q*
IF ( passive_scalar ) sums_l(:,114,i) = sums_wsss_ws_l(:,i) ! w*s*
ENDDO
ENDIF
!
!-- Horizontally averaged profiles of horizontal velocities and temperature.
!-- They must have been computed before, because they are already required
!-- for other horizontal averages.
tn = 0
!$OMP PARALLEL PRIVATE( i, j, k, tn, flag )
!$ tn = omp_get_thread_num()
!$OMP DO
!$ACC PARALLEL LOOP COLLAPSE(3) PRIVATE(i, j, k, flag) &
!$ACC PRESENT(wall_flags_total_0, u, v, pt, rmask, sums_l)
DO i = nxl, nxr
DO j = nys, nyn
DO k = nzb, nzt+1
flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 22 ) )
!$ACC ATOMIC
sums_l(k,1,tn) = sums_l(k,1,tn) + u(k,j,i) * rmask(j,i,sr) &
* flag
!$ACC ATOMIC
sums_l(k,2,tn) = sums_l(k,2,tn) + v(k,j,i) * rmask(j,i,sr) &
* flag
!$ACC ATOMIC
sums_l(k,4,tn) = sums_l(k,4,tn) + pt(k,j,i) * rmask(j,i,sr) &
* flag
ENDDO
ENDDO
ENDDO
!$ACC UPDATE HOST(sums_l(:,1,tn), sums_l(:,2,tn), sums_l(:,4,tn))
!
!-- Horizontally averaged profile of salinity
IF ( ocean_mode ) THEN
!$OMP DO
DO i = nxl, nxr
DO j = nys, nyn
DO k = nzb, nzt+1
sums_l(k,23,tn) = sums_l(k,23,tn) + sa(k,j,i) &
* rmask(j,i,sr) &
* MERGE( 1.0_wp, 0.0_wp, &
BTEST( wall_flags_total_0(k,j,i), 22 ) )
ENDDO
ENDDO
ENDDO
ENDIF
!
!-- Horizontally averaged profiles of virtual potential temperature,
!-- total water content, water vapor mixing ratio and liquid water potential
!-- temperature
IF ( humidity ) THEN
!$OMP DO
DO i = nxl, nxr
DO j = nys, nyn
DO k = nzb, nzt+1
flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 22 ) )
sums_l(k,44,tn) = sums_l(k,44,tn) + &
vpt(k,j,i) * rmask(j,i,sr) * flag
sums_l(k,41,tn) = sums_l(k,41,tn) + &
q(k,j,i) * rmask(j,i,sr) * flag
ENDDO
ENDDO
ENDDO
IF ( bulk_cloud_model ) THEN
!$OMP DO
DO i = nxl, nxr
DO j = nys, nyn
DO k = nzb, nzt+1
flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 22 ) )
sums_l(k,42,tn) = sums_l(k,42,tn) + &
( q(k,j,i) - ql(k,j,i) ) * rmask(j,i,sr) &
* flag
sums_l(k,43,tn) = sums_l(k,43,tn) + ( &
pt(k,j,i) + lv_d_cp * d_exner(k) * ql(k,j,i) &
) * rmask(j,i,sr) &
* flag
ENDDO
ENDDO
ENDDO
ENDIF
ENDIF
!
!-- Horizontally averaged profiles of passive scalar
IF ( passive_scalar ) THEN
!$OMP DO
DO i = nxl, nxr
DO j = nys, nyn
DO k = nzb, nzt+1
sums_l(k,115,tn) = sums_l(k,115,tn) + s(k,j,i) &
* rmask(j,i,sr) &
* MERGE( 1.0_wp, 0.0_wp, &
BTEST( wall_flags_total_0(k,j,i), 22 ) )
ENDDO
ENDDO
ENDDO
ENDIF
!$OMP END PARALLEL
!
!-- Summation of thread sums
IF ( threads_per_task > 1 ) THEN
DO i = 1, threads_per_task-1
sums_l(:,1,0) = sums_l(:,1,0) + sums_l(:,1,i)
sums_l(:,2,0) = sums_l(:,2,0) + sums_l(:,2,i)
sums_l(:,4,0) = sums_l(:,4,0) + sums_l(:,4,i)
IF ( ocean_mode ) THEN
sums_l(:,23,0) = sums_l(:,23,0) + sums_l(:,23,i)
ENDIF
IF ( humidity ) THEN
sums_l(:,41,0) = sums_l(:,41,0) + sums_l(:,41,i)
sums_l(:,44,0) = sums_l(:,44,0) + sums_l(:,44,i)
IF ( bulk_cloud_model ) THEN
sums_l(:,42,0) = sums_l(:,42,0) + sums_l(:,42,i)
sums_l(:,43,0) = sums_l(:,43,0) + sums_l(:,43,i)
ENDIF
ENDIF
IF ( passive_scalar ) THEN
sums_l(:,115,0) = sums_l(:,115,0) + sums_l(:,115,i)
ENDIF
ENDDO
ENDIF
#if defined( __parallel )
!
!-- Compute total sum from local sums
IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
CALL MPI_ALLREDUCE( sums_l(nzb,1,0), sums(nzb,1), nzt+2-nzb, MPI_REAL, &
MPI_SUM, comm2d, ierr )
IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
CALL MPI_ALLREDUCE( sums_l(nzb,2,0), sums(nzb,2), nzt+2-nzb, MPI_REAL, &
MPI_SUM, comm2d, ierr )
IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
CALL MPI_ALLREDUCE( sums_l(nzb,4,0), sums(nzb,4), nzt+2-nzb, MPI_REAL, &
MPI_SUM, comm2d, ierr )
IF ( ocean_mode ) THEN
IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
CALL MPI_ALLREDUCE( sums_l(nzb,23,0), sums(nzb,23), nzt+2-nzb, &
MPI_REAL, MPI_SUM, comm2d, ierr )
ENDIF
IF ( humidity ) THEN
IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
CALL MPI_ALLREDUCE( sums_l(nzb,44,0), sums(nzb,44), nzt+2-nzb, &
MPI_REAL, MPI_SUM, comm2d, ierr )
IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
CALL MPI_ALLREDUCE( sums_l(nzb,41,0), sums(nzb,41), nzt+2-nzb, &
MPI_REAL, MPI_SUM, comm2d, ierr )
IF ( bulk_cloud_model ) THEN
IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
CALL MPI_ALLREDUCE( sums_l(nzb,42,0), sums(nzb,42), nzt+2-nzb, &
MPI_REAL, MPI_SUM, comm2d, ierr )
IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
CALL MPI_ALLREDUCE( sums_l(nzb,43,0), sums(nzb,43), nzt+2-nzb, &
MPI_REAL, MPI_SUM, comm2d, ierr )
ENDIF
ENDIF
IF ( passive_scalar ) THEN
IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
CALL MPI_ALLREDUCE( sums_l(nzb,115,0), sums(nzb,115), nzt+2-nzb, &
MPI_REAL, MPI_SUM, comm2d, ierr )
ENDIF
#else
sums(:,1) = sums_l(:,1,0)
sums(:,2) = sums_l(:,2,0)
sums(:,4) = sums_l(:,4,0)
IF ( ocean_mode ) sums(:,23) = sums_l(:,23,0)
IF ( humidity ) THEN
sums(:,44) = sums_l(:,44,0)
sums(:,41) = sums_l(:,41,0)
IF ( bulk_cloud_model ) THEN
sums(:,42) = sums_l(:,42,0)
sums(:,43) = sums_l(:,43,0)
ENDIF
ENDIF
IF ( passive_scalar ) sums(:,115) = sums_l(:,115,0)
#endif
!
!-- Final values are obtained by division by the total number of grid points
!-- used for summation. After that store profiles.
sums(:,1) = sums(:,1) / ngp_2dh(sr)
sums(:,2) = sums(:,2) / ngp_2dh(sr)
sums(:,4) = sums(:,4) / ngp_2dh_s_inner(:,sr)
hom(:,1,1,sr) = sums(:,1) ! u
hom(:,1,2,sr) = sums(:,2) ! v
hom(:,1,4,sr) = sums(:,4) ! pt
!$ACC UPDATE DEVICE(hom(:,1,1,sr), hom(:,1,2,sr), hom(:,1,4,sr))
!
!-- Salinity
IF ( ocean_mode ) THEN
sums(:,23) = sums(:,23) / ngp_2dh_s_inner(:,sr)
hom(:,1,23,sr) = sums(:,23) ! sa
ENDIF
!
!-- Humidity and cloud parameters
IF ( humidity ) THEN
sums(:,44) = sums(:,44) / ngp_2dh_s_inner(:,sr)
sums(:,41) = sums(:,41) / ngp_2dh_s_inner(:,sr)
hom(:,1,44,sr) = sums(:,44) ! vpt
hom(:,1,41,sr) = sums(:,41) ! qv (q)
IF ( bulk_cloud_model ) THEN
sums(:,42) = sums(:,42) / ngp_2dh_s_inner(:,sr)
sums(:,43) = sums(:,43) / ngp_2dh_s_inner(:,sr)
hom(:,1,42,sr) = sums(:,42) ! qv
hom(:,1,43,sr) = sums(:,43) ! pt
ENDIF
ENDIF
!
!-- Passive scalar
IF ( passive_scalar ) hom(:,1,115,sr) = sums(:,115) / &
ngp_2dh_s_inner(:,sr) ! s
!
!-- Horizontally averaged profiles of the remaining prognostic variables,
!-- variances, the total and the perturbation energy (single values in last
!-- column of sums_l) and some diagnostic quantities.
!-- NOTE: for simplicity, nzb_s_inner is used below, although strictly
!-- ---- speaking the following k-loop would have to be split up and
!-- rearranged according to the staggered grid.
!-- However, this implies no error since staggered velocity components
!-- are zero at the walls and inside buildings.
tn = 0
!$OMP PARALLEL PRIVATE( i, j, k, pts, sums_ll, &
!$OMP sums_l_etot, tn, ust, ust2, u2, vst, vst2, v2, &
!$OMP w2, flag, m, ki, l )
!$ tn = omp_get_thread_num()
!$OMP DO
!$ACC PARALLEL LOOP COLLAPSE(2) PRIVATE(i, j, k, m) &
!$ACC PRIVATE(sums_l_etot, flag, du_dx, du_dy, du_dz) &
!$ACC PRIVATE(dv_dx, dv_dy, dv_dz, dw_dx, dw_dy, dw_dz) &
!$ACC PRIVATE(s11, s21, s31, s12, s22, s32, s13, s23, s33) &
!$ACC PRIVATE(dissipation, eta) &
!$ACC PRESENT(wall_flags_total_0, rmask, momentumflux_output_conversion) &
!$ACC PRESENT(hom(:,1,1:2,sr), hom(:,1,4,sr)) &
!$ACC PRESENT(e, u, v, w, km, kh, p, pt) &
!$ACC PRESENT(ddx, ddy, ddzu, ddzw) &
!$ACC PRESENT(surf_def_h(0), surf_lsm_h, surf_usm_h) &
!$ACC PRESENT(sums_l)
DO i = nxl, nxr
DO j = nys, nyn
sums_l_etot = 0.0_wp
DO k = nzb, nzt+1
flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 22 ) )
!
!-- Prognostic and diagnostic variables
!$ACC ATOMIC
sums_l(k,3,tn) = sums_l(k,3,tn) + w(k,j,i) * rmask(j,i,sr) &
* flag
!$ACC ATOMIC
sums_l(k,8,tn) = sums_l(k,8,tn) + e(k,j,i) * rmask(j,i,sr) &
* flag
!$ACC ATOMIC
sums_l(k,9,tn) = sums_l(k,9,tn) + km(k,j,i) * rmask(j,i,sr) &
* flag
!$ACC ATOMIC
sums_l(k,10,tn) = sums_l(k,10,tn) + kh(k,j,i) * rmask(j,i,sr) &
* flag
!$ACC ATOMIC
sums_l(k,40,tn) = sums_l(k,40,tn) + ( p(k,j,i) &
/ momentumflux_output_conversion(k) ) &
* flag
!$ACC ATOMIC
sums_l(k,33,tn) = sums_l(k,33,tn) + &
( pt(k,j,i)-hom(k,1,4,sr) )**2 * rmask(j,i,sr)&
* flag
#ifndef _OPENACC
IF ( humidity ) THEN
sums_l(k,70,tn) = sums_l(k,70,tn) + &
( q(k,j,i)-hom(k,1,41,sr) )**2 * rmask(j,i,sr)&
* flag
ENDIF
IF ( passive_scalar ) THEN
sums_l(k,116,tn) = sums_l(k,116,tn) + &
( s(k,j,i)-hom(k,1,115,sr) )**2 * rmask(j,i,sr)&
* flag
ENDIF
#endif
!
!-- Higher moments
!-- (Computation of the skewness of w further below)
!$ACC ATOMIC
sums_l(k,38,tn) = sums_l(k,38,tn) + w(k,j,i)**3 * rmask(j,i,sr) &
* flag
sums_l_etot = sums_l_etot + &
0.5_wp * ( u(k,j,i)**2 + v(k,j,i)**2 + &
w(k,j,i)**2 ) * rmask(j,i,sr)&
* flag
!
!-- Computation of the Kolmogorov length scale. Calculation is based
!-- on gradients of the deviations from the horizontal mean.
!-- Kolmogorov scale at the boundaries (k=0/z=0m and k=nzt+1) is set to zero.
IF ( kolmogorov_length_scale .AND. k /= nzb .AND. k /= nzt+1) THEN
flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 22 ) )
!
!-- Calculate components of the fluctuating rate-of-strain tensor
!-- (0.5*(del u'_i/del x_j + del u'_j/del x_i)) defined in the
!-- center of each grid box.
du_dx = ( ( u(k,j,i+1) - hom(k,1,1,sr) ) - &
( u(k,j,i) - hom(k,1,1,sr) ) ) * ddx
du_dy = 0.25_wp * ddy * &
( ( u(k,j+1,i) - hom(k,1,1,sr) ) - &
( u(k,j-1,i) - hom(k,1,1,sr) ) + &
( u(k,j+1,i+1) - hom(k,1,1,sr) ) - &
( u(k,j-1,i+1) - hom(k,1,1,sr) ) )
du_dz = 0.25_wp * ( ( ( u(k+1,j,i) - hom(k+1,1,1,sr) ) - &
( u(k,j,i) - hom(k,1,1,sr) ) ) * &
ddzu(k+1) + &
( ( u(k,j,i) - hom(k,1,1,sr) ) - &
( u(k-1,j,i) - hom(k-1,1,1,sr) ) )* &
ddzu(k) + &
( ( u(k+1,j,i+1) - hom(k+1,1,1,sr) )- &
( u(k,j,i+1) - hom(k,1,1,sr) ) ) * &
ddzu(k+1) + &
( ( u(k,j,i+1) - hom(k,1,1,sr) ) - &
( u(k-1,j,i+1) - hom(k-1,1,1,sr) ) ) *&
ddzu(k) )
dv_dx = 0.25_wp * ddx * &
( ( v(k,j,i+1) - hom(k,1,2,sr) ) - &
( v(k,j,i-1) - hom(k,1,2,sr) ) + &
( v(k,j+1,i+1) - hom(k,1,2,sr) ) - &
( v(k,j+1,i-1) - hom(k,1,2,sr) ) )
dv_dy = ( ( v(k,j+1,i) - hom(k,1,2,sr) ) - &
( v(k,j,i) - hom(k,1,2,sr) ) ) * ddy
dv_dz = 0.25_wp * ( ( ( v(k+1,j,i) - hom(k+1,1,2,sr) ) - &
( v(k,j,i) - hom(k,1,2,sr) ) ) * &
ddzu(k+1) + &
( ( v(k,j,i) - hom(k,1,2,sr) ) - &
( v(k-1,j,i) - hom(k-1,1,2,sr) ) ) * &
ddzu(k) + &
( ( v(k+1,j+1,i) - hom(k+1,1,2,sr) ) - &
( v(k,j+1,i) - hom(k,1,2,sr) ) ) * &
ddzu(k+1) + &
( ( v(k,j+1,i) - hom(k,1,2,sr) ) - &
( v(k-1,j+1,i) - hom(k-1,1,2,sr) ) ) *&
ddzu(k) )
dw_dx = 0.25_wp * ddx * ( w(k,j,i+1) - w(k,j,i-1) + &
w(k-1,j,i+1) - w(k-1,j,i-1) )
dw_dy = 0.25_wp * ddy * ( w(k,j+1,i) - w(k,j-1,i) + &
w(k-1,j+1,i) - w(k-1,j-1,i) )
dw_dz = ( w(k,j,i) - w(k-1,j,i) ) * ddzw(k)
s11 = 0.5_wp * ( du_dx + du_dx )
s21 = 0.5_wp * ( dv_dx + du_dy )
s31 = 0.5_wp * ( dw_dx + du_dz )
s12 = s21
s22 = 0.5 * ( dv_dy + dv_dy )
s32 = 0.5 * ( dw_dy + dv_dz )
s13 = s31
s23 = s32
s33 = 0.5_wp * ( dw_dz + dw_dz )
!-- Calculate 3D instantaneous energy dissipation rate after
!-- Pope (2000): Turbulent flows, p.259. It is defined in the center
!-- of each grid volume.
dissipation = 2.0_wp * km(k,j,i) * &
( s11*s11 + s21*s21 + s31*s31 + &
s12*s12 + s22*s22 + s32*s32 + &
s13*s13 + s23*s23 + s33*s33 )
eta = ( km(k,j,i)**3.0_wp / ( dissipation+1.0E-12 ) )**(1.0_wp/4.0_wp)
!$ACC ATOMIC
sums_l(k,121,tn) = sums_l(k,121,tn) + eta * rmask(j,i,sr) &
* flag
ENDIF !Kolmogorov length scale
ENDDO !k-loop
!
!-- Total and perturbation energy for the total domain (being
!-- collected in the last column of sums_l). Summation of these
!-- quantities is seperated from the previous loop in order to
!-- allow vectorization of that loop.
!$ACC ATOMIC
sums_l(nzb+4,pr_palm,tn) = sums_l(nzb+4,pr_palm,tn) + sums_l_etot
!
!-- 2D-arrays (being collected in the last column of sums_l)
IF ( surf_def_h(0)%end_index(j,i) >= &
surf_def_h(0)%start_index(j,i) ) THEN
m = surf_def_h(0)%start_index(j,i)
!$ACC ATOMIC
sums_l(nzb,pr_palm,tn) = sums_l(nzb,pr_palm,tn) + &
surf_def_h(0)%us(m) * rmask(j,i,sr)
!$ACC ATOMIC
sums_l(nzb+1,pr_palm,tn) = sums_l(nzb+1,pr_palm,tn) + &
surf_def_h(0)%usws(m) * rmask(j,i,sr)
!$ACC ATOMIC
sums_l(nzb+2,pr_palm,tn) = sums_l(nzb+2,pr_palm,tn) + &
surf_def_h(0)%vsws(m) * rmask(j,i,sr)
!$ACC ATOMIC
sums_l(nzb+3,pr_palm,tn) = sums_l(nzb+3,pr_palm,tn) + &
surf_def_h(0)%ts(m) * rmask(j,i,sr)
#ifndef _OPENACC
IF ( humidity ) THEN
sums_l(nzb+12,pr_palm,tn) = sums_l(nzb+12,pr_palm,tn) + &
surf_def_h(0)%qs(m) * rmask(j,i,sr)
ENDIF
IF ( passive_scalar ) THEN
sums_l(nzb+13,pr_palm,tn) = sums_l(nzb+13,pr_palm,tn) + &
surf_def_h(0)%ss(m) * rmask(j,i,sr)
ENDIF
#endif
!
!-- Summation of surface temperature.
!$ACC ATOMIC
sums_l(nzb+14,pr_palm,tn) = sums_l(nzb+14,pr_palm,tn) + &
surf_def_h(0)%pt_surface(m) * &
rmask(j,i,sr)
ENDIF
IF ( surf_lsm_h%end_index(j,i) >= surf_lsm_h%start_index(j,i) ) THEN
m = surf_lsm_h%start_index(j,i)
!$ACC ATOMIC
sums_l(nzb,pr_palm,tn) = sums_l(nzb,pr_palm,tn) + &
surf_lsm_h%us(m) * rmask(j,i,sr)
!$ACC ATOMIC
sums_l(nzb+1,pr_palm,tn) = sums_l(nzb+1,pr_palm,tn) + &
surf_lsm_h%usws(m) * rmask(j,i,sr)
!$ACC ATOMIC
sums_l(nzb+2,pr_palm,tn) = sums_l(nzb+2,pr_palm,tn) + &
surf_lsm_h%vsws(m) * rmask(j,i,sr)
!$ACC ATOMIC
sums_l(nzb+3,pr_palm,tn) = sums_l(nzb+3,pr_palm,tn) + &
surf_lsm_h%ts(m) * rmask(j,i,sr)
#ifndef _OPENACC
IF ( humidity ) THEN
sums_l(nzb+12,pr_palm,tn) = sums_l(nzb+12,pr_palm,tn) + &
surf_lsm_h%qs(m) * rmask(j,i,sr)
ENDIF
IF ( passive_scalar ) THEN
sums_l(nzb+13,pr_palm,tn) = sums_l(nzb+13,pr_palm,tn) + &
surf_lsm_h%ss(m) * rmask(j,i,sr)
ENDIF
#endif
!
!-- Summation of surface temperature.
!$ACC ATOMIC
sums_l(nzb+14,pr_palm,tn) = sums_l(nzb+14,pr_palm,tn) + &
surf_lsm_h%pt_surface(m) * &
rmask(j,i,sr)
ENDIF
IF ( surf_usm_h%end_index(j,i) >= surf_usm_h%start_index(j,i) ) THEN
m = surf_usm_h%start_index(j,i)
!$ACC ATOMIC
sums_l(nzb,pr_palm,tn) = sums_l(nzb,pr_palm,tn) + &
surf_usm_h%us(m) * rmask(j,i,sr)
!$ACC ATOMIC
sums_l(nzb+1,pr_palm,tn) = sums_l(nzb+1,pr_palm,tn) + &
surf_usm_h%usws(m) * rmask(j,i,sr)
!$ACC ATOMIC
sums_l(nzb+2,pr_palm,tn) = sums_l(nzb+2,pr_palm,tn) + &
surf_usm_h%vsws(m) * rmask(j,i,sr)
!$ACC ATOMIC
sums_l(nzb+3,pr_palm,tn) = sums_l(nzb+3,pr_palm,tn) + &
surf_usm_h%ts(m) * rmask(j,i,sr)
#ifndef _OPENACC
IF ( humidity ) THEN
sums_l(nzb+12,pr_palm,tn) = sums_l(nzb+12,pr_palm,tn) + &
surf_usm_h%qs(m) * rmask(j,i,sr)
ENDIF
IF ( passive_scalar ) THEN
sums_l(nzb+13,pr_palm,tn) = sums_l(nzb+13,pr_palm,tn) + &
surf_usm_h%ss(m) * rmask(j,i,sr)
ENDIF
#endif
!
!-- Summation of surface temperature.
!$ACC ATOMIC
sums_l(nzb+14,pr_palm,tn) = sums_l(nzb+14,pr_palm,tn) + &
surf_usm_h%pt_surface(m) * &
rmask(j,i,sr)
ENDIF
ENDDO !j-loop
ENDDO !i-loop
!$ACC UPDATE &
!$ACC HOST(sums_l(:,3,tn), sums_l(:,8,tn), sums_l(:,9,tn)) &
!$ACC HOST(sums_l(:,10,tn), sums_l(:,40,tn), sums_l(:,33,tn)) &
!$ACC HOST(sums_l(:,38,tn), sums_l(:,121,tn)) &
!$ACC HOST(sums_l(nzb:nzb+4,pr_palm,tn), sums_l(nzb+14:nzb+14,pr_palm,tn))
!
!-- Computation of statistics when ws-scheme is not used. Else these
!-- quantities are evaluated in the advection routines.
IF ( .NOT. ws_scheme_mom .OR. sr /= 0 .OR. simulated_time == 0.0_wp ) &
THEN
!$OMP DO
DO i = nxl, nxr
DO j = nys, nyn
DO k = nzb, nzt+1
flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 22 ) )
u2 = u(k,j,i)**2
v2 = v(k,j,i)**2
w2 = w(k,j,i)**2
ust2 = ( u(k,j,i) - hom(k,1,1,sr) )**2
vst2 = ( v(k,j,i) - hom(k,1,2,sr) )**2
sums_l(k,30,tn) = sums_l(k,30,tn) + ust2 * rmask(j,i,sr) &
* flag
sums_l(k,31,tn) = sums_l(k,31,tn) + vst2 * rmask(j,i,sr) &
* flag
sums_l(k,32,tn) = sums_l(k,32,tn) + w2 * rmask(j,i,sr) &
* flag
!
!-- Perturbation energy
sums_l(k,34,tn) = sums_l(k,34,tn) + 0.5_wp * &
( ust2 + vst2 + w2 ) * rmask(j,i,sr) &
* flag
ENDDO
ENDDO
ENDDO
ENDIF
!
!-- Computaion of domain-averaged perturbation energy. Please note,
!-- to prevent that perturbation energy is larger (even if only slightly)
!-- than the total kinetic energy, calculation is based on deviations from
!-- the horizontal mean, instead of spatial descretization of the advection
!-- term.
!$OMP DO
!$ACC PARALLEL LOOP COLLAPSE(3) PRIVATE(i, j, k, flag, w2, ust2, vst2) &
!$ACC PRESENT(wall_flags_total_0, u, v, w, rmask, hom(:,1,1:2,sr)) &
!$ACC PRESENT(sums_l)
DO i = nxl, nxr
DO j = nys, nyn
DO k = nzb, nzt+1
flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 22 ) )
w2 = w(k,j,i)**2
ust2 = ( u(k,j,i) - hom(k,1,1,sr) )**2
vst2 = ( v(k,j,i) - hom(k,1,2,sr) )**2
w2 = w(k,j,i)**2
!$ACC ATOMIC
sums_l(nzb+5,pr_palm,tn) = sums_l(nzb+5,pr_palm,tn) &
+ 0.5_wp * ( ust2 + vst2 + w2 ) &
* rmask(j,i,sr) &
* flag
ENDDO
ENDDO
ENDDO
!$ACC UPDATE HOST(sums_l(nzb+5:nzb+5,pr_palm,tn))
!
!-- Horizontally averaged profiles of the vertical fluxes
!$OMP DO
!$ACC PARALLEL LOOP COLLAPSE(2) PRIVATE(i, j, k, l, m) &
!$ACC PRIVATE(ki, flag, ust, vst, pts) &
!$ACC PRESENT(kh, km, u, v, w, pt) &
!$ACC PRESENT(wall_flags_total_0, rmask, ddzu, rho_air_zw, hom(:,1,1:4,sr)) &
!$ACC PRESENT(heatflux_output_conversion, momentumflux_output_conversion) &
!$ACC PRESENT(surf_def_h(0:2), surf_lsm_h, surf_usm_h) &
!$ACC PRESENT(sums_l)
DO i = nxl, nxr
DO j = nys, nyn
!
!-- Subgridscale fluxes (without Prandtl layer from k=nzb,
!-- oterwise from k=nzb+1)
!-- NOTE: for simplicity, nzb_diff_s_inner is used below, although
!-- ---- strictly speaking the following k-loop would have to be
!-- split up according to the staggered grid.
!-- However, this implies no error since staggered velocity
!-- components are zero at the walls and inside buildings.
!-- Flag 23 is used to mask surface fluxes as well as model-top fluxes,
!-- which are added further below.
DO k = nzb, nzt
flag = MERGE( 1.0_wp, 0.0_wp, &
BTEST( wall_flags_total_0(k,j,i), 23 ) ) * &
MERGE( 1.0_wp, 0.0_wp, &
BTEST( wall_flags_total_0(k,j,i), 9 ) )
!
!-- Momentum flux w"u"
!$ACC ATOMIC
sums_l(k,12,tn) = sums_l(k,12,tn) - 0.25_wp * ( &
km(k,j,i)+km(k+1,j,i)+km(k,j,i-1)+km(k+1,j,i-1) &
) * ( &
( u(k+1,j,i) - u(k,j,i) ) * ddzu(k+1) &
+ ( w(k,j,i) - w(k,j,i-1) ) * ddx &
) * rmask(j,i,sr) &
* rho_air_zw(k) &
* momentumflux_output_conversion(k) &
* flag
!
!-- Momentum flux w"v"
!$ACC ATOMIC
sums_l(k,14,tn) = sums_l(k,14,tn) - 0.25_wp * ( &
km(k,j,i)+km(k+1,j,i)+km(k,j-1,i)+km(k+1,j-1,i) &
) * ( &
( v(k+1,j,i) - v(k,j,i) ) * ddzu(k+1) &
+ ( w(k,j,i) - w(k,j-1,i) ) * ddy &
) * rmask(j,i,sr) &
* rho_air_zw(k) &
* momentumflux_output_conversion(k) &
* flag
!
!-- Heat flux w"pt"
!$ACC ATOMIC
sums_l(k,16,tn) = sums_l(k,16,tn) &
- 0.5_wp * ( kh(k,j,i) + kh(k+1,j,i) )&
* ( pt(k+1,j,i) - pt(k,j,i) ) &
* rho_air_zw(k) &
* heatflux_output_conversion(k) &
* ddzu(k+1) * rmask(j,i,sr) &
* flag
!
!-- Salinity flux w"sa"
#ifndef _OPENACC
IF ( ocean_mode ) THEN
sums_l(k,65,tn) = sums_l(k,65,tn) &
- 0.5_wp * ( kh(k,j,i) + kh(k+1,j,i) )&
* ( sa(k+1,j,i) - sa(k,j,i) ) &
* ddzu(k+1) * rmask(j,i,sr) &
* flag
ENDIF
!
!-- Buoyancy flux, water flux (humidity flux) w"q"
IF ( humidity ) THEN
sums_l(k,45,tn) = sums_l(k,45,tn) &
- 0.5_wp * ( kh(k,j,i) + kh(k+1,j,i) )&
* ( vpt(k+1,j,i) - vpt(k,j,i) ) &
* rho_air_zw(k) &
* heatflux_output_conversion(k) &
* ddzu(k+1) * rmask(j,i,sr) * flag
sums_l(k,48,tn) = sums_l(k,48,tn) &
- 0.5_wp * ( kh(k,j,i) + kh(k+1,j,i) )&
* ( q(k+1,j,i) - q(k,j,i) ) &
* rho_air_zw(k) &
* waterflux_output_conversion(k)&
* ddzu(k+1) * rmask(j,i,sr) * flag
IF ( bulk_cloud_model ) THEN
sums_l(k,51,tn) = sums_l(k,51,tn) &
- 0.5_wp * ( kh(k,j,i) + kh(k+1,j,i) )&
* ( ( q(k+1,j,i) - ql(k+1,j,i) )&
- ( q(k,j,i) - ql(k,j,i) ) ) &
* rho_air_zw(k) &
* waterflux_output_conversion(k)&
* ddzu(k+1) * rmask(j,i,sr) * flag
ENDIF
ENDIF
!
!-- Passive scalar flux
IF ( passive_scalar ) THEN
sums_l(k,117,tn) = sums_l(k,117,tn) &
- 0.5_wp * ( kh(k,j,i) + kh(k+1,j,i) )&
* ( s(k+1,j,i) - s(k,j,i) ) &
* ddzu(k+1) * rmask(j,i,sr) &
* flag
ENDIF
#endif
ENDDO
!
!-- Subgridscale fluxes in the Prandtl layer
IF ( use_surface_fluxes ) THEN
DO l = 0, 1
! The original code using MERGE doesn't work with the PGI
! compiler when running on the GPU.
! This is submitted as a compiler Bug in PGI ticket TPR#26718
! ki = MERGE( -1, 0, l == 0 )
ki = -1 + l
IF ( surf_def_h(l)%ns >= 1 ) THEN
DO m = surf_def_h(l)%start_index(j,i), &
surf_def_h(l)%end_index(j,i)
k = surf_def_h(l)%k(m)
!$ACC ATOMIC
sums_l(k+ki,12,tn) = sums_l(k+ki,12,tn) + &
momentumflux_output_conversion(k+ki) * &
surf_def_h(l)%usws(m) * rmask(j,i,sr) ! w"u"
!$ACC ATOMIC
sums_l(k+ki,14,tn) = sums_l(k+ki,14,tn) + &
momentumflux_output_conversion(k+ki) * &
surf_def_h(l)%vsws(m) * rmask(j,i,sr) ! w"v"
!$ACC ATOMIC
sums_l(k+ki,16,tn) = sums_l(k+ki,16,tn) + &
heatflux_output_conversion(k+ki) * &
surf_def_h(l)%shf(m) * rmask(j,i,sr) ! w"pt"
#if 0
sums_l(k+ki,58,tn) = sums_l(k+ki,58,tn) + &
0.0_wp * rmask(j,i,sr) ! u"pt"
sums_l(k+ki,61,tn) = sums_l(k+ki,61,tn) + &
0.0_wp * rmask(j,i,sr) ! v"pt"
#endif
#ifndef _OPENACC
IF ( ocean_mode ) THEN
sums_l(k+ki,65,tn) = sums_l(k+ki,65,tn) + &
surf_def_h(l)%sasws(m) * rmask(j,i,sr) ! w"sa"
ENDIF
IF ( humidity ) THEN
sums_l(k+ki,48,tn) = sums_l(k+ki,48,tn) + &
waterflux_output_conversion(k+ki) * &
surf_def_h(l)%qsws(m) * rmask(j,i,sr) ! w"q" (w"qv")
sums_l(k+ki,45,tn) = sums_l(k+ki,45,tn) + ( &
( 1.0_wp + 0.61_wp * q(k+ki,j,i) ) * &
surf_def_h(l)%shf(m) + 0.61_wp * pt(k+ki,j,i) * &
surf_def_h(l)%qsws(m) ) &
* heatflux_output_conversion(k+ki)
IF ( cloud_droplets ) THEN
sums_l(k+ki,45,tn) = sums_l(k+ki,45,tn) + ( &
( 1.0_wp + 0.61_wp * q(k+ki,j,i) - &
ql(k+ki,j,i) ) * surf_def_h(l)%shf(m) + &
0.61_wp * pt(k+ki,j,i) * surf_def_h(l)%qsws(m) ) &
* heatflux_output_conversion(k+ki)
ENDIF
IF ( bulk_cloud_model ) THEN
!
!-- Formula does not work if ql(k+ki) /= 0.0
sums_l(k+ki,51,tn) = sums_l(k+ki,51,tn) + &
waterflux_output_conversion(k+ki) * &
surf_def_h(l)%qsws(m) * rmask(j,i,sr) ! w"q" (w"qv")
ENDIF
ENDIF
IF ( passive_scalar ) THEN
sums_l(k+ki,117,tn) = sums_l(k+ki,117,tn) + &
surf_def_h(l)%ssws(m) * rmask(j,i,sr) ! w"s"
ENDIF
#endif
ENDDO
ENDIF
ENDDO
IF ( surf_lsm_h%end_index(j,i) >= &
surf_lsm_h%start_index(j,i) ) THEN
m = surf_lsm_h%start_index(j,i)
!$ACC ATOMIC
sums_l(nzb,12,tn) = sums_l(nzb,12,tn) + &
momentumflux_output_conversion(nzb) * &
surf_lsm_h%usws(m) * rmask(j,i,sr) ! w"u"
!$ACC ATOMIC
sums_l(nzb,14,tn) = sums_l(nzb,14,tn) + &
momentumflux_output_conversion(nzb) * &
surf_lsm_h%vsws(m) * rmask(j,i,sr) ! w"v"
!$ACC ATOMIC
sums_l(nzb,16,tn) = sums_l(nzb,16,tn) + &
heatflux_output_conversion(nzb) * &
surf_lsm_h%shf(m) * rmask(j,i,sr) ! w"pt"
#if 0
sums_l(nzb,58,tn) = sums_l(nzb,58,tn) + &
0.0_wp * rmask(j,i,sr) ! u"pt"
sums_l(nzb,61,tn) = sums_l(nzb,61,tn) + &
0.0_wp * rmask(j,i,sr) ! v"pt"
#endif
#ifndef _OPENACC
IF ( ocean_mode ) THEN
sums_l(nzb,65,tn) = sums_l(nzb,65,tn) + &
surf_lsm_h%sasws(m) * rmask(j,i,sr) ! w"sa"
ENDIF
IF ( humidity ) THEN
sums_l(nzb,48,tn) = sums_l(nzb,48,tn) + &
waterflux_output_conversion(nzb) * &
surf_lsm_h%qsws(m) * rmask(j,i,sr) ! w"q" (w"qv")
sums_l(nzb,45,tn) = sums_l(nzb,45,tn) + ( &
( 1.0_wp + 0.61_wp * q(nzb,j,i) ) * &
surf_lsm_h%shf(m) + 0.61_wp * pt(nzb,j,i) * &
surf_lsm_h%qsws(m) ) &
* heatflux_output_conversion(nzb)
IF ( cloud_droplets ) THEN
sums_l(nzb,45,tn) = sums_l(nzb,45,tn) + ( &
( 1.0_wp + 0.61_wp * q(nzb,j,i) - &
ql(nzb,j,i) ) * surf_lsm_h%shf(m) + &
0.61_wp * pt(nzb,j,i) * surf_lsm_h%qsws(m) ) &
* heatflux_output_conversion(nzb)
ENDIF
IF ( bulk_cloud_model ) THEN
!
!-- Formula does not work if ql(nzb) /= 0.0
sums_l(nzb,51,tn) = sums_l(nzb,51,tn) + &
waterflux_output_conversion(nzb) * &
surf_lsm_h%qsws(m) * rmask(j,i,sr) ! w"q" (w"qv")
ENDIF
ENDIF
IF ( passive_scalar ) THEN
sums_l(nzb,117,tn) = sums_l(nzb,117,tn) + &
surf_lsm_h%ssws(m) * rmask(j,i,sr) ! w"s"
ENDIF
#endif
ENDIF
IF ( surf_usm_h%end_index(j,i) >= &
surf_usm_h%start_index(j,i) ) THEN
m = surf_usm_h%start_index(j,i)
!$ACC ATOMIC
sums_l(nzb,12,tn) = sums_l(nzb,12,tn) + &
momentumflux_output_conversion(nzb) * &
surf_usm_h%usws(m) * rmask(j,i,sr) ! w"u"
!$ACC ATOMIC
sums_l(nzb,14,tn) = sums_l(nzb,14,tn) + &
momentumflux_output_conversion(nzb) * &
surf_usm_h%vsws(m) * rmask(j,i,sr) ! w"v"
!$ACC ATOMIC
sums_l(nzb,16,tn) = sums_l(nzb,16,tn) + &
heatflux_output_conversion(nzb) * &
surf_usm_h%shf(m) * rmask(j,i,sr) ! w"pt"
#if 0
sums_l(nzb,58,tn) = sums_l(nzb,58,tn) + &
0.0_wp * rmask(j,i,sr) ! u"pt"
sums_l(nzb,61,tn) = sums_l(nzb,61,tn) + &
0.0_wp * rmask(j,i,sr) ! v"pt"
#endif
#ifndef _OPENACC
IF ( ocean_mode ) THEN
sums_l(nzb,65,tn) = sums_l(nzb,65,tn) + &
surf_usm_h%sasws(m) * rmask(j,i,sr) ! w"sa"
ENDIF
IF ( humidity ) THEN
sums_l(nzb,48,tn) = sums_l(nzb,48,tn) + &
waterflux_output_conversion(nzb) * &
surf_usm_h%qsws(m) * rmask(j,i,sr) ! w"q" (w"qv")
sums_l(nzb,45,tn) = sums_l(nzb,45,tn) + ( &
( 1.0_wp + 0.61_wp * q(nzb,j,i) ) * &
surf_usm_h%shf(m) + 0.61_wp * pt(nzb,j,i) * &
surf_usm_h%qsws(m) ) &
* heatflux_output_conversion(nzb)
IF ( cloud_droplets ) THEN
sums_l(nzb,45,tn) = sums_l(nzb,45,tn) + ( &
( 1.0_wp + 0.61_wp * q(nzb,j,i) - &
ql(nzb,j,i) ) * surf_usm_h%shf(m) + &
0.61_wp * pt(nzb,j,i) * surf_usm_h%qsws(m) ) &
* heatflux_output_conversion(nzb)
ENDIF
IF ( bulk_cloud_model ) THEN
!
!-- Formula does not work if ql(nzb) /= 0.0
sums_l(nzb,51,tn) = sums_l(nzb,51,tn) + &
waterflux_output_conversion(nzb) * &
surf_usm_h%qsws(m) * rmask(j,i,sr) ! w"q" (w"qv")
ENDIF
ENDIF
IF ( passive_scalar ) THEN
sums_l(nzb,117,tn) = sums_l(nzb,117,tn) + &
surf_usm_h%ssws(m) * rmask(j,i,sr) ! w"s"
ENDIF
#endif
ENDIF
ENDIF
#ifndef _OPENACC
IF ( .NOT. neutral ) THEN
IF ( surf_def_h(0)%end_index(j,i) >= &
surf_def_h(0)%start_index(j,i) ) THEN
m = surf_def_h(0)%start_index(j,i)
sums_l(nzb,112,tn) = sums_l(nzb,112,tn) + &
surf_def_h(0)%ol(m) * rmask(j,i,sr) ! L
ENDIF
IF ( surf_lsm_h%end_index(j,i) >= &
surf_lsm_h%start_index(j,i) ) THEN
m = surf_lsm_h%start_index(j,i)
sums_l(nzb,112,tn) = sums_l(nzb,112,tn) + &
surf_lsm_h%ol(m) * rmask(j,i,sr) ! L
ENDIF
IF ( surf_usm_h%end_index(j,i) >= &
surf_usm_h%start_index(j,i) ) THEN
m = surf_usm_h%start_index(j,i)
sums_l(nzb,112,tn) = sums_l(nzb,112,tn) + &
surf_usm_h%ol(m) * rmask(j,i,sr) ! L
ENDIF
ENDIF
IF ( radiation ) THEN
IF ( surf_def_h(0)%end_index(j,i) >= &
surf_def_h(0)%start_index(j,i) ) THEN
m = surf_def_h(0)%start_index(j,i)
sums_l(nzb,99,tn) = sums_l(nzb,99,tn) + &
surf_def_h(0)%rad_net(m) * rmask(j,i,sr)
sums_l(nzb,100,tn) = sums_l(nzb,100,tn) + &
surf_def_h(0)%rad_lw_in(m) * rmask(j,i,sr)
sums_l(nzb,101,tn) = sums_l(nzb,101,tn) + &
surf_def_h(0)%rad_lw_out(m) * rmask(j,i,sr)
sums_l(nzb,102,tn) = sums_l(nzb,102,tn) + &
surf_def_h(0)%rad_sw_in(m) * rmask(j,i,sr)
sums_l(nzb,103,tn) = sums_l(nzb,103,tn) + &
surf_def_h(0)%rad_sw_out(m) * rmask(j,i,sr)
ENDIF
IF ( surf_lsm_h%end_index(j,i) >= &
surf_lsm_h%start_index(j,i) ) THEN
m = surf_lsm_h%start_index(j,i)
sums_l(nzb,99,tn) = sums_l(nzb,99,tn) + &
surf_lsm_h%rad_net(m) * rmask(j,i,sr)
sums_l(nzb,100,tn) = sums_l(nzb,100,tn) + &
surf_lsm_h%rad_lw_in(m) * rmask(j,i,sr)
sums_l(nzb,101,tn) = sums_l(nzb,101,tn) + &
surf_lsm_h%rad_lw_out(m) * rmask(j,i,sr)
sums_l(nzb,102,tn) = sums_l(nzb,102,tn) + &
surf_lsm_h%rad_sw_in(m) * rmask(j,i,sr)
sums_l(nzb,103,tn) = sums_l(nzb,103,tn) + &
surf_lsm_h%rad_sw_out(m) * rmask(j,i,sr)
ENDIF
IF ( surf_usm_h%end_index(j,i) >= &
surf_usm_h%start_index(j,i) ) THEN
m = surf_usm_h%start_index(j,i)
sums_l(nzb,99,tn) = sums_l(nzb,99,tn) + &
surf_usm_h%rad_net(m) * rmask(j,i,sr)
sums_l(nzb,100,tn) = sums_l(nzb,100,tn) + &
surf_usm_h%rad_lw_in(m) * rmask(j,i,sr)
sums_l(nzb,101,tn) = sums_l(nzb,101,tn) + &
surf_usm_h%rad_lw_out(m) * rmask(j,i,sr)
sums_l(nzb,102,tn) = sums_l(nzb,102,tn) + &
surf_usm_h%rad_sw_in(m) * rmask(j,i,sr)
sums_l(nzb,103,tn) = sums_l(nzb,103,tn) + &
surf_usm_h%rad_sw_out(m) * rmask(j,i,sr)
ENDIF
#if defined ( __rrtmg )
IF ( radiation_scheme == 'rrtmg' ) THEN
IF ( surf_def_h(0)%end_index(j,i) >= &
surf_def_h(0)%start_index(j,i) ) THEN
m = surf_def_h(0)%start_index(j,i)
sums_l(nzb,108,tn) = sums_l(nzb,108,tn) + &
surf_def_h(0)%rrtm_aldif(m,0) * rmask(j,i,sr)
sums_l(nzb,109,tn) = sums_l(nzb,109,tn) + &
surf_def_h(0)%rrtm_aldir(m,0) * rmask(j,i,sr)
sums_l(nzb,110,tn) = sums_l(nzb,110,tn) + &
surf_def_h(0)%rrtm_asdif(m,0) * rmask(j,i,sr)
sums_l(nzb,111,tn) = sums_l(nzb,111,tn) + &
surf_def_h(0)%rrtm_asdir(m,0) * rmask(j,i,sr)
ENDIF
IF ( surf_lsm_h%end_index(j,i) >= &
surf_lsm_h%start_index(j,i) ) THEN
m = surf_lsm_h%start_index(j,i)
sums_l(nzb,108,tn) = sums_l(nzb,108,tn) + &
SUM( surf_lsm_h%frac(m,:) * &
surf_lsm_h%rrtm_aldif(m,:) ) * rmask(j,i,sr)
sums_l(nzb,109,tn) = sums_l(nzb,109,tn) + &
SUM( surf_lsm_h%frac(m,:) * &
surf_lsm_h%rrtm_aldir(m,:) ) * rmask(j,i,sr)
sums_l(nzb,110,tn) = sums_l(nzb,110,tn) + &
SUM( surf_lsm_h%frac(m,:) * &
surf_lsm_h%rrtm_asdif(m,:) ) * rmask(j,i,sr)
sums_l(nzb,111,tn) = sums_l(nzb,111,tn) + &
SUM( surf_lsm_h%frac(m,:) * &
surf_lsm_h%rrtm_asdir(m,:) ) * rmask(j,i,sr)
ENDIF
IF ( surf_usm_h%end_index(j,i) >= &
surf_usm_h%start_index(j,i) ) THEN
m = surf_usm_h%start_index(j,i)
sums_l(nzb,108,tn) = sums_l(nzb,108,tn) + &
SUM( surf_usm_h%frac(m,:) * &
surf_usm_h%rrtm_aldif(m,:) ) * rmask(j,i,sr)
sums_l(nzb,109,tn) = sums_l(nzb,109,tn) + &
SUM( surf_usm_h%frac(m,:) * &
surf_usm_h%rrtm_aldir(m,:) ) * rmask(j,i,sr)
sums_l(nzb,110,tn) = sums_l(nzb,110,tn) + &
SUM( surf_usm_h%frac(m,:) * &
surf_usm_h%rrtm_asdif(m,:) ) * rmask(j,i,sr)
sums_l(nzb,111,tn) = sums_l(nzb,111,tn) + &
SUM( surf_usm_h%frac(m,:) * &
surf_usm_h%rrtm_asdir(m,:) ) * rmask(j,i,sr)
ENDIF
ENDIF
#endif
ENDIF
#endif
!
!-- Subgridscale fluxes at the top surface
IF ( use_top_fluxes ) THEN
m = surf_def_h(2)%start_index(j,i)
!$ACC ATOMIC
sums_l(nzt,12,tn) = sums_l(nzt,12,tn) + &
momentumflux_output_conversion(nzt) * &
surf_def_h(2)%usws(m) * rmask(j,i,sr) ! w"u"
!$ACC ATOMIC
sums_l(nzt+1,12,tn) = sums_l(nzt+1,12,tn) + &
momentumflux_output_conversion(nzt+1) * &
surf_def_h(2)%usws(m) * rmask(j,i,sr) ! w"u"
!$ACC ATOMIC
sums_l(nzt,14,tn) = sums_l(nzt,14,tn) + &
momentumflux_output_conversion(nzt) * &
surf_def_h(2)%vsws(m) * rmask(j,i,sr) ! w"v"
!$ACC ATOMIC
sums_l(nzt+1,14,tn) = sums_l(nzt+1,14,tn) + &
momentumflux_output_conversion(nzt+1) * &
surf_def_h(2)%vsws(m) * rmask(j,i,sr) ! w"v"
!$ACC ATOMIC
sums_l(nzt,16,tn) = sums_l(nzt,16,tn) + &
heatflux_output_conversion(nzt) * &
surf_def_h(2)%shf(m) * rmask(j,i,sr) ! w"pt"
!$ACC ATOMIC
sums_l(nzt+1,16,tn) = sums_l(nzt+1,16,tn) + &
heatflux_output_conversion(nzt+1) * &
surf_def_h(2)%shf(m) * rmask(j,i,sr) ! w"pt"
#if 0
sums_l(nzt:nzt+1,58,tn) = sums_l(nzt:nzt+1,58,tn) + &
0.0_wp * rmask(j,i,sr) ! u"pt"
sums_l(nzt:nzt+1,61,tn) = sums_l(nzt:nzt+1,61,tn) + &
0.0_wp * rmask(j,i,sr) ! v"pt"
#endif
#ifndef _OPENACC
IF ( ocean_mode ) THEN
sums_l(nzt,65,tn) = sums_l(nzt,65,tn) + &
surf_def_h(2)%sasws(m) * rmask(j,i,sr) ! w"sa"
ENDIF
IF ( humidity ) THEN
sums_l(nzt,48,tn) = sums_l(nzt,48,tn) + &
waterflux_output_conversion(nzt) * &
surf_def_h(2)%qsws(m) * rmask(j,i,sr) ! w"q" (w"qv")
sums_l(nzt,45,tn) = sums_l(nzt,45,tn) + ( &
( 1.0_wp + 0.61_wp * q(nzt,j,i) ) * &
surf_def_h(2)%shf(m) + &
0.61_wp * pt(nzt,j,i) * &
surf_def_h(2)%qsws(m) ) &
* heatflux_output_conversion(nzt)
IF ( cloud_droplets ) THEN
sums_l(nzt,45,tn) = sums_l(nzt,45,tn) + ( &
( 1.0_wp + 0.61_wp * q(nzt,j,i) - &
ql(nzt,j,i) ) * &
surf_def_h(2)%shf(m) + &
0.61_wp * pt(nzt,j,i) * &
surf_def_h(2)%qsws(m) )&
* heatflux_output_conversion(nzt)
ENDIF
IF ( bulk_cloud_model ) THEN
!
!-- Formula does not work if ql(nzb) /= 0.0
sums_l(nzt,51,tn) = sums_l(nzt,51,tn) + & ! w"q" (w"qv")
waterflux_output_conversion(nzt) * &
surf_def_h(2)%qsws(m) * rmask(j,i,sr)
ENDIF
ENDIF
IF ( passive_scalar ) THEN
sums_l(nzt,117,tn) = sums_l(nzt,117,tn) + &
surf_def_h(2)%ssws(m) * rmask(j,i,sr) ! w"s"
ENDIF
#endif
ENDIF
!
!-- Resolved fluxes (can be computed for all horizontal points)
!-- NOTE: for simplicity, nzb_s_inner is used below, although strictly
!-- ---- speaking the following k-loop would have to be split up and
!-- rearranged according to the staggered grid.
DO k = nzb, nzt
flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 22 ) )
ust = 0.5_wp * ( u(k,j,i) - hom(k,1,1,sr) + &
u(k+1,j,i) - hom(k+1,1,1,sr) )
vst = 0.5_wp * ( v(k,j,i) - hom(k,1,2,sr) + &
v(k+1,j,i) - hom(k+1,1,2,sr) )
pts = 0.5_wp * ( pt(k,j,i) - hom(k,1,4,sr) + &
pt(k+1,j,i) - hom(k+1,1,4,sr) )
!-- Higher moments
!$ACC ATOMIC
sums_l(k,35,tn) = sums_l(k,35,tn) + pts * w(k,j,i)**2 * &
rmask(j,i,sr) * flag
!$ACC ATOMIC
sums_l(k,36,tn) = sums_l(k,36,tn) + pts**2 * w(k,j,i) * &
rmask(j,i,sr) * flag
!
!-- Salinity flux and density (density does not belong to here,
!-- but so far there is no other suitable place to calculate)
#ifndef _OPENACC
IF ( ocean_mode ) THEN
IF( .NOT. ws_scheme_sca .OR. sr /= 0 ) THEN
pts = 0.5_wp * ( sa(k,j,i) - hom(k,1,23,sr) + &
sa(k+1,j,i) - hom(k+1,1,23,sr) )
sums_l(k,66,tn) = sums_l(k,66,tn) + pts * w(k,j,i) * &
rmask(j,i,sr) * flag
ENDIF
sums_l(k,64,tn) = sums_l(k,64,tn) + rho_ocean(k,j,i) * &
rmask(j,i,sr) * flag
sums_l(k,71,tn) = sums_l(k,71,tn) + prho(k,j,i) * &
rmask(j,i,sr) * flag
ENDIF
!
!-- Buoyancy flux, water flux, humidity flux, liquid water
!-- content, rain drop concentration and rain water content
IF ( humidity ) THEN
IF ( bulk_cloud_model .OR. cloud_droplets ) THEN
pts = 0.5_wp * ( vpt(k,j,i) - hom(k,1,44,sr) + &
vpt(k+1,j,i) - hom(k+1,1,44,sr) )
sums_l(k,46,tn) = sums_l(k,46,tn) + pts * w(k,j,i) * &
rho_air_zw(k) * &
heatflux_output_conversion(k) * &
rmask(j,i,sr) * flag
sums_l(k,54,tn) = sums_l(k,54,tn) + ql(k,j,i) * rmask(j,i,sr) &
* flag
IF ( .NOT. cloud_droplets ) THEN
pts = 0.5_wp * &
( ( q(k,j,i) - ql(k,j,i) ) - &
hom(k,1,42,sr) + &
( q(k+1,j,i) - ql(k+1,j,i) ) - &
hom(k+1,1,42,sr) )
sums_l(k,52,tn) = sums_l(k,52,tn) + pts * w(k,j,i) * &
rho_air_zw(k) * &
waterflux_output_conversion(k) * &
rmask(j,i,sr) * &
flag
sums_l(k,75,tn) = sums_l(k,75,tn) + qc(k,j,i) * &
rmask(j,i,sr) * &
flag
sums_l(k,76,tn) = sums_l(k,76,tn) + prr(k,j,i) * &
rmask(j,i,sr) * &
flag
IF ( microphysics_morrison ) THEN
sums_l(k,123,tn) = sums_l(k,123,tn) + nc(k,j,i) * &
rmask(j,i,sr) *&
flag
ENDIF
IF ( microphysics_ice_phase ) THEN
sums_l(k,124,tn) = sums_l(k,124,tn) + ni(k,j,i) * &
rmask(j,i,sr) *&
flag
sums_l(k,125,tn) = sums_l(k,125,tn) + qi(k,j,i) * &
rmask(j,i,sr) *&
flag
ENDIF
IF ( microphysics_seifert ) THEN
sums_l(k,73,tn) = sums_l(k,73,tn) + nr(k,j,i) * &
rmask(j,i,sr) *&
flag
sums_l(k,74,tn) = sums_l(k,74,tn) + qr(k,j,i) * &
rmask(j,i,sr) *&
flag
ENDIF
ENDIF
ELSE
IF( .NOT. ws_scheme_sca .OR. sr /= 0 ) THEN
pts = 0.5_wp * ( vpt(k,j,i) - hom(k,1,44,sr) + &
vpt(k+1,j,i) - hom(k+1,1,44,sr) )
sums_l(k,46,tn) = sums_l(k,46,tn) + pts * w(k,j,i) * &
rho_air_zw(k) * &
heatflux_output_conversion(k) * &
rmask(j,i,sr) * &
flag
ELSE IF ( ws_scheme_sca .AND. sr == 0 ) THEN
sums_l(k,46,tn) = ( ( 1.0_wp + 0.61_wp * &
hom(k,1,41,sr) ) * &
sums_l(k,17,tn) + &
0.61_wp * hom(k,1,4,sr) * &
sums_l(k,49,tn) &
) * heatflux_output_conversion(k) * &
flag
END IF
END IF
ENDIF
!
!-- Passive scalar flux
IF ( passive_scalar .AND. ( .NOT. ws_scheme_sca &
.OR. sr /= 0 ) ) THEN
pts = 0.5_wp * ( s(k,j,i) - hom(k,1,115,sr) + &
s(k+1,j,i) - hom(k+1,1,115,sr) )
sums_l(k,114,tn) = sums_l(k,114,tn) + pts * w(k,j,i) * &
rmask(j,i,sr) * flag
ENDIF
#endif
!
!-- Energy flux w*e*
!-- has to be adjusted
!$ACC ATOMIC
sums_l(k,37,tn) = sums_l(k,37,tn) + w(k,j,i) * 0.5_wp * &
( ust**2 + vst**2 + w(k,j,i)**2 ) &
* rho_air_zw(k) &
* momentumflux_output_conversion(k) &
* rmask(j,i,sr) * flag
ENDDO
ENDDO
ENDDO
!$OMP END PARALLEL
!$ACC UPDATE &
!$ACC HOST(sums_l(:,12,tn), sums_l(:,14,tn), sums_l(:,16,tn)) &
!$ACC HOST(sums_l(:,35,tn), sums_l(:,36,tn), sums_l(:,37,tn))
!
!-- Treat land-surface quantities according to new wall model structure.
IF ( land_surface ) THEN
tn = 0
!$OMP PARALLEL PRIVATE( i, j, m, tn )
!$ tn = omp_get_thread_num()
!$OMP DO
DO m = 1, surf_lsm_h%ns
i = surf_lsm_h%i(m)
j = surf_lsm_h%j(m)
IF ( i >= nxl .AND. i <= nxr .AND. &
j >= nys .AND. j <= nyn ) THEN
sums_l(nzb,93,tn) = sums_l(nzb,93,tn) + surf_lsm_h%ghf(m)
sums_l(nzb,94,tn) = sums_l(nzb,94,tn) + surf_lsm_h%qsws_liq(m)
sums_l(nzb,95,tn) = sums_l(nzb,95,tn) + surf_lsm_h%qsws_soil(m)
sums_l(nzb,96,tn) = sums_l(nzb,96,tn) + surf_lsm_h%qsws_veg(m)
sums_l(nzb,97,tn) = sums_l(nzb,97,tn) + surf_lsm_h%r_a(m)
sums_l(nzb,98,tn) = sums_l(nzb,98,tn)+ surf_lsm_h%r_s(m)
ENDIF
ENDDO
!$OMP END PARALLEL
tn = 0
!$OMP PARALLEL PRIVATE( i, j, k, m, tn )
!$ tn = omp_get_thread_num()
!$OMP DO
DO m = 1, surf_lsm_h%ns
i = surf_lsm_h%i(m)
j = surf_lsm_h%j(m)
IF ( i >= nxl .AND. i <= nxr .AND. &
j >= nys .AND. j <= nyn ) THEN
DO k = nzb_soil, nzt_soil
sums_l(k,89,tn) = sums_l(k,89,tn) + t_soil_h%var_2d(k,m) &
* rmask(j,i,sr)
sums_l(k,91,tn) = sums_l(k,91,tn) + m_soil_h%var_2d(k,m) &
* rmask(j,i,sr)
ENDDO
ENDIF
ENDDO
!$OMP END PARALLEL
ENDIF
!
!-- For speed optimization fluxes which have been computed in part directly
!-- inside the WS advection routines are treated seperatly
!-- Momentum fluxes first:
tn = 0
!$OMP PARALLEL PRIVATE( i, j, k, tn, flag )
!$ tn = omp_get_thread_num()
IF ( .NOT. ws_scheme_mom .OR. sr /= 0 ) THEN
!$OMP DO
DO i = nxl, nxr
DO j = nys, nyn
DO k = nzb, nzt
!
!-- Flag 23 is used to mask surface fluxes as well as model-top
!-- fluxes, which are added further below.
flag = MERGE( 1.0_wp, 0.0_wp, &
BTEST( wall_flags_total_0(k,j,i), 23 ) ) * &
MERGE( 1.0_wp, 0.0_wp, &
BTEST( wall_flags_total_0(k,j,i), 9 ) )
ust = 0.5_wp * ( u(k,j,i) - hom(k,1,1,sr) + &
u(k+1,j,i) - hom(k+1,1,1,sr) )
vst = 0.5_wp * ( v(k,j,i) - hom(k,1,2,sr) + &
v(k+1,j,i) - hom(k+1,1,2,sr) )
!
!-- Momentum flux w*u*
sums_l(k,13,tn) = sums_l(k,13,tn) + 0.5_wp * &
( w(k,j,i-1) + w(k,j,i) ) &
* rho_air_zw(k) &
* momentumflux_output_conversion(k) &
* ust * rmask(j,i,sr) &
* flag
!
!-- Momentum flux w*v*
sums_l(k,15,tn) = sums_l(k,15,tn) + 0.5_wp * &
( w(k,j-1,i) + w(k,j,i) ) &
* rho_air_zw(k) &
* momentumflux_output_conversion(k) &
* vst * rmask(j,i,sr) &
* flag
ENDDO
ENDDO
ENDDO
ENDIF
IF ( .NOT. ws_scheme_sca .OR. sr /= 0 ) THEN
!$OMP DO
DO i = nxl, nxr
DO j = nys, nyn
DO k = nzb, nzt
flag = MERGE( 1.0_wp, 0.0_wp, &
BTEST( wall_flags_total_0(k,j,i), 23 ) ) * &
MERGE( 1.0_wp, 0.0_wp, &
BTEST( wall_flags_total_0(k,j,i), 9 ) )
!
!-- Vertical heat flux
sums_l(k,17,tn) = sums_l(k,17,tn) + 0.5_wp * &
( pt(k,j,i) - hom(k,1,4,sr) + &
pt(k+1,j,i) - hom(k+1,1,4,sr) ) &
* rho_air_zw(k) &
* heatflux_output_conversion(k) &
* w(k,j,i) * rmask(j,i,sr) * flag
IF ( humidity ) THEN
pts = 0.5_wp * ( q(k,j,i) - hom(k,1,41,sr) + &
q(k+1,j,i) - hom(k+1,1,41,sr) )
sums_l(k,49,tn) = sums_l(k,49,tn) + pts * w(k,j,i) * &
rho_air_zw(k) * &
waterflux_output_conversion(k) * &
rmask(j,i,sr) * flag
ENDIF
IF ( passive_scalar ) THEN
pts = 0.5_wp * ( s(k,j,i) - hom(k,1,115,sr) + &
s(k+1,j,i) - hom(k+1,1,115,sr) )
sums_l(k,114,tn) = sums_l(k,114,tn) + pts * w(k,j,i) * &
rmask(j,i,sr) * flag
ENDIF
ENDDO
ENDDO
ENDDO
ENDIF
!
!-- Density at top follows Neumann condition
IF ( ocean_mode ) THEN
sums_l(nzt+1,64,tn) = sums_l(nzt,64,tn)
sums_l(nzt+1,71,tn) = sums_l(nzt,71,tn)
ENDIF
!
!-- Divergence of vertical flux of resolved scale energy and pressure
!-- fluctuations as well as flux of pressure fluctuation itself (68).
!-- First calculate the products, then the divergence.
!-- Calculation is time consuming. Do it only, if profiles shall be plotted.
IF ( hom(nzb+1,2,55,0) /= 0.0_wp .OR. hom(nzb+1,2,68,0) /= 0.0_wp ) &
THEN
sums_ll = 0.0_wp ! local array
!$OMP DO
DO i = nxl, nxr
DO j = nys, nyn
DO k = nzb+1, nzt
flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 0 ) )
sums_ll(k,1) = sums_ll(k,1) + 0.5_wp * w(k,j,i) * ( &
( 0.25_wp * ( u(k,j,i)+u(k+1,j,i)+u(k,j,i+1)+u(k+1,j,i+1) ) &
- 0.5_wp * ( hom(k,1,1,sr) + hom(k+1,1,1,sr) ) )**2&
+ ( 0.25_wp * ( v(k,j,i)+v(k+1,j,i)+v(k,j+1,i)+v(k+1,j+1,i) ) &
- 0.5_wp * ( hom(k,1,2,sr) + hom(k+1,1,2,sr) ) )**2&
+ w(k,j,i)**2 ) * flag
sums_ll(k,2) = sums_ll(k,2) + 0.5_wp * w(k,j,i) &
* ( ( p(k,j,i) + p(k+1,j,i) ) &
/ momentumflux_output_conversion(k) ) &
* flag
ENDDO
ENDDO
ENDDO
sums_ll(0,1) = 0.0_wp ! because w is zero at the bottom
sums_ll(nzt+1,1) = 0.0_wp
sums_ll(0,2) = 0.0_wp
sums_ll(nzt+1,2) = 0.0_wp
DO k = nzb+1, nzt
sums_l(k,55,tn) = ( sums_ll(k,1) - sums_ll(k-1,1) ) * ddzw(k)
sums_l(k,56,tn) = ( sums_ll(k,2) - sums_ll(k-1,2) ) * ddzw(k)
sums_l(k,68,tn) = sums_ll(k,2)
ENDDO
sums_l(nzb,55,tn) = sums_l(nzb+1,55,tn)
sums_l(nzb,56,tn) = sums_l(nzb+1,56,tn)
sums_l(nzb,68,tn) = 0.0_wp ! because w* = 0 at nzb
ENDIF
!
!-- Divergence of vertical flux of SGS TKE and the flux itself (69)
IF ( hom(nzb+1,2,57,0) /= 0.0_wp .OR. hom(nzb+1,2,69,0) /= 0.0_wp ) &
THEN
!$OMP DO
DO i = nxl, nxr
DO j = nys, nyn
DO k = nzb+1, nzt
flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 0 ) )
sums_l(k,57,tn) = sums_l(k,57,tn) - 0.5_wp * ( &
(km(k,j,i)+km(k+1,j,i)) * (e(k+1,j,i)-e(k,j,i)) * ddzu(k+1) &
- (km(k-1,j,i)+km(k,j,i)) * (e(k,j,i)-e(k-1,j,i)) * ddzu(k) &
) * ddzw(k) &
* flag
sums_l(k,69,tn) = sums_l(k,69,tn) - 0.5_wp * ( &
(km(k,j,i)+km(k+1,j,i)) * (e(k+1,j,i)-e(k,j,i)) * ddzu(k+1) &
) * flag
ENDDO
ENDDO
ENDDO
sums_l(nzb,57,tn) = sums_l(nzb+1,57,tn)
sums_l(nzb,69,tn) = sums_l(nzb+1,69,tn)
ENDIF
!
!-- Horizontal heat fluxes (subgrid, resolved, total).
!-- Do it only, if profiles shall be plotted.
IF ( hom(nzb+1,2,58,0) /= 0.0_wp ) THEN
!$OMP DO
DO i = nxl, nxr
DO j = nys, nyn
DO k = nzb+1, nzt
flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 0 ) )
!
!-- Subgrid horizontal heat fluxes u"pt", v"pt"
sums_l(k,58,tn) = sums_l(k,58,tn) - 0.5_wp * &
( kh(k,j,i) + kh(k,j,i-1) ) &
* ( pt(k,j,i-1) - pt(k,j,i) ) &
* rho_air_zw(k) &
* heatflux_output_conversion(k) &
* ddx * rmask(j,i,sr) * flag
sums_l(k,61,tn) = sums_l(k,61,tn) - 0.5_wp * &
( kh(k,j,i) + kh(k,j-1,i) ) &
* ( pt(k,j-1,i) - pt(k,j,i) ) &
* rho_air_zw(k) &
* heatflux_output_conversion(k) &
* ddy * rmask(j,i,sr) * flag
!
!-- Resolved horizontal heat fluxes u*pt*, v*pt*
sums_l(k,59,tn) = sums_l(k,59,tn) + &
( u(k,j,i) - hom(k,1,1,sr) ) &
* 0.5_wp * ( pt(k,j,i-1) - hom(k,1,4,sr) + &
pt(k,j,i) - hom(k,1,4,sr) ) &
* heatflux_output_conversion(k) &
* flag
pts = 0.5_wp * ( pt(k,j-1,i) - hom(k,1,4,sr) + &
pt(k,j,i) - hom(k,1,4,sr) )
sums_l(k,62,tn) = sums_l(k,62,tn) + &
( v(k,j,i) - hom(k,1,2,sr) ) &
* 0.5_wp * ( pt(k,j-1,i) - hom(k,1,4,sr) + &
pt(k,j,i) - hom(k,1,4,sr) ) &
* heatflux_output_conversion(k) &
* flag
ENDDO
ENDDO
ENDDO
!
!-- Fluxes at the surface must be zero (e.g. due to the Prandtl-layer)
sums_l(nzb,58,tn) = 0.0_wp
sums_l(nzb,59,tn) = 0.0_wp
sums_l(nzb,60,tn) = 0.0_wp
sums_l(nzb,61,tn) = 0.0_wp
sums_l(nzb,62,tn) = 0.0_wp
sums_l(nzb,63,tn) = 0.0_wp
ENDIF
!$OMP END PARALLEL
!
!-- Collect current large scale advection and subsidence tendencies for
!-- data output
IF ( large_scale_forcing .AND. ( simulated_time > 0.0_wp ) ) THEN
!
!-- Interpolation in time of LSF_DATA
nt = 1
DO WHILE ( simulated_time - dt_3d > time_vert(nt) )
nt = nt + 1
ENDDO
IF ( simulated_time - dt_3d /= time_vert(nt) ) THEN
nt = nt - 1
ENDIF
fac = ( simulated_time - dt_3d - time_vert(nt) ) &
/ ( time_vert(nt+1)-time_vert(nt) )
DO k = nzb, nzt
sums_ls_l(k,0) = td_lsa_lpt(k,nt) &
+ fac * ( td_lsa_lpt(k,nt+1) - td_lsa_lpt(k,nt) )
sums_ls_l(k,1) = td_lsa_q(k,nt) &
+ fac * ( td_lsa_q(k,nt+1) - td_lsa_q(k,nt) )
ENDDO
sums_ls_l(nzt+1,0) = sums_ls_l(nzt,0)
sums_ls_l(nzt+1,1) = sums_ls_l(nzt,1)
IF ( large_scale_subsidence .AND. use_subsidence_tendencies ) THEN
DO k = nzb, nzt
sums_ls_l(k,2) = td_sub_lpt(k,nt) + fac * &
( td_sub_lpt(k,nt+1) - td_sub_lpt(k,nt) )
sums_ls_l(k,3) = td_sub_q(k,nt) + fac * &
( td_sub_q(k,nt+1) - td_sub_q(k,nt) )
ENDDO
sums_ls_l(nzt+1,2) = sums_ls_l(nzt,2)
sums_ls_l(nzt+1,3) = sums_ls_l(nzt,3)
ENDIF
ENDIF
tn = 0
!$OMP PARALLEL PRIVATE( i, j, k, tn )
!$ tn = omp_get_thread_num()
IF ( radiation .AND. radiation_scheme == 'rrtmg' ) THEN
!$OMP DO
DO i = nxl, nxr
DO j = nys, nyn
DO k = nzb+1, nzt+1
flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 0 ) )
sums_l(k,100,tn) = sums_l(k,100,tn) + rad_lw_in(k,j,i) &
* rmask(j,i,sr) * flag
sums_l(k,101,tn) = sums_l(k,101,tn) + rad_lw_out(k,j,i) &
* rmask(j,i,sr) * flag
sums_l(k,102,tn) = sums_l(k,102,tn) + rad_sw_in(k,j,i) &
* rmask(j,i,sr) * flag
sums_l(k,103,tn) = sums_l(k,103,tn) + rad_sw_out(k,j,i) &
* rmask(j,i,sr) * flag
sums_l(k,104,tn) = sums_l(k,104,tn) + rad_lw_cs_hr(k,j,i) &
* rmask(j,i,sr) * flag
sums_l(k,105,tn) = sums_l(k,105,tn) + rad_lw_hr(k,j,i) &
* rmask(j,i,sr) * flag
sums_l(k,106,tn) = sums_l(k,106,tn) + rad_sw_cs_hr(k,j,i) &
* rmask(j,i,sr) * flag
sums_l(k,107,tn) = sums_l(k,107,tn) + rad_sw_hr(k,j,i) &
* rmask(j,i,sr) * flag
ENDDO
ENDDO
ENDDO
ENDIF
!
!-- Calculate the profiles for all other modules
CALL module_interface_statistics( 'profiles', sr, tn, dots_max )
!$OMP END PARALLEL
!
!-- Summation of thread sums
IF ( threads_per_task > 1 ) THEN
DO i = 1, threads_per_task-1
sums_l(:,3,0) = sums_l(:,3,0) + sums_l(:,3,i)
sums_l(:,4:40,0) = sums_l(:,4:40,0) + sums_l(:,4:40,i)
sums_l(:,45:pr_palm,0) = sums_l(:,45:pr_palm,0) + &
sums_l(:,45:pr_palm,i)
IF ( max_pr_user > 0 ) THEN
sums_l(:,pr_palm+1:pr_palm+max_pr_user,0) = &
sums_l(:,pr_palm+1:pr_palm+max_pr_user,0) + &
sums_l(:,pr_palm+1:pr_palm+max_pr_user,i)
ENDIF
IF ( air_chemistry ) THEN
IF ( max_pr_cs > 0 ) THEN
sums_l(:,pr_palm+max_pr_user+1:pr_palm + max_pr_user+ max_pr_cs,0) = &
sums_l(:,pr_palm+max_pr_user+1:pr_palm + max_pr_user+max_pr_cs,0) + &
sums_l(:,pr_palm+max_pr_user+1:pr_palm + max_pr_user+max_pr_cs,i)
ENDIF
ENDIF
IF ( salsa ) THEN
IF ( max_pr_cs > 0 ) THEN
sums_l(:,pr_palm+max_pr_user+max_pr_cs+1:pr_palm+max_pr_user+max_pr_cs+max_pr_salsa,0) = &
sums_l(:,pr_palm+max_pr_user+max_pr_cs+1:pr_palm+max_pr_user+max_pr_cs+max_pr_salsa,0) + &
sums_l(:,pr_palm+max_pr_user+max_pr_cs+1:pr_palm+max_pr_user+max_pr_cs+max_pr_salsa,i)
ENDIF
ENDIF
ENDDO
ENDIF
#if defined( __parallel )
!
!-- Compute total sum from local sums
IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
CALL MPI_ALLREDUCE( sums_l(nzb,1,0), sums(nzb,1), ngp_sums, MPI_REAL, &
MPI_SUM, comm2d, ierr )
IF ( large_scale_forcing ) THEN
CALL MPI_ALLREDUCE( sums_ls_l(nzb,2), sums(nzb,83), ngp_sums_ls, &
MPI_REAL, MPI_SUM, comm2d, ierr )
ENDIF
IF ( air_chemistry .AND. max_pr_cs > 0 ) THEN
IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
DO i = 1, max_pr_cs
CALL MPI_ALLREDUCE( sums_l(nzb,pr_palm+max_pr_user+i,0), &
sums(nzb,pr_palm+max_pr_user+i), &
nzt+2-nzb, MPI_REAL, MPI_SUM, comm2d, ierr )
ENDDO
ENDIF
IF ( salsa .AND. max_pr_salsa > 0 ) THEN
IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
DO i = 1, max_pr_salsa
CALL MPI_ALLREDUCE( sums_l(nzb,pr_palm+max_pr_user+max_pr_cs+i,0), &
sums(nzb,pr_palm+max_pr_user+max_pr_user+i), &
nzt+2-nzb, MPI_REAL, MPI_SUM, comm2d, ierr )
ENDDO
ENDIF
#else
sums = sums_l(:,:,0)
IF ( large_scale_forcing ) THEN
sums(:,81:88) = sums_ls_l
ENDIF
#endif
!
!-- Final values are obtained by division by the total number of grid points
!-- used for summation. After that store profiles.
!-- Check, if statistical regions do contain at least one grid point at the
!-- respective k-level, otherwise division by zero will lead to undefined
!-- values, which may cause e.g. problems with NetCDF output
!-- Profiles:
DO k = nzb, nzt+1
sums(k,3) = sums(k,3) / ngp_2dh(sr)
sums(k,12:22) = sums(k,12:22) / ngp_2dh(sr)
sums(k,30:32) = sums(k,30:32) / ngp_2dh(sr)
sums(k,35:39) = sums(k,35:39) / ngp_2dh(sr)
sums(k,45:53) = sums(k,45:53) / ngp_2dh(sr)
sums(k,55:63) = sums(k,55:63) / ngp_2dh(sr)
sums(k,81:88) = sums(k,81:88) / ngp_2dh(sr)
sums(k,89:112) = sums(k,89:112) / ngp_2dh(sr)
sums(k,114) = sums(k,114) / ngp_2dh(sr)
sums(k,117) = sums(k,117) / ngp_2dh(sr)
IF ( ngp_2dh_s_inner(k,sr) /= 0 ) THEN
sums(k,8:11) = sums(k,8:11) / ngp_2dh_s_inner(k,sr)
sums(k,23:29) = sums(k,23:29) / ngp_2dh_s_inner(k,sr)
sums(k,33:34) = sums(k,33:34) / ngp_2dh_s_inner(k,sr)
sums(k,40) = sums(k,40) / ngp_2dh_s_inner(k,sr)
sums(k,54) = sums(k,54) / ngp_2dh_s_inner(k,sr)
sums(k,64) = sums(k,64) / ngp_2dh_s_inner(k,sr)
sums(k,70:80) = sums(k,70:80) / ngp_2dh_s_inner(k,sr)
sums(k,116) = sums(k,116) / ngp_2dh_s_inner(k,sr)
sums(k,118:pr_palm-2) = sums(k,118:pr_palm-2) / ngp_2dh_s_inner(k,sr)
sums(k,123:125) = sums(k,123:125) * ngp_2dh_s_inner(k,sr) / ngp_2dh(sr)
ENDIF
ENDDO
!-- u* and so on
!-- As sums(nzb:nzb+3,pr_palm) are full 2D arrays (us, usws, vsws, ts) whose
!-- size is always ( nx + 1 ) * ( ny + 1 ), defined at the first grid layer
!-- above the topography, they are being divided by ngp_2dh(sr)
sums(nzb:nzb+3,pr_palm) = sums(nzb:nzb+3,pr_palm) / &
ngp_2dh(sr)
sums(nzb+12,pr_palm) = sums(nzb+12,pr_palm) / & ! qs
ngp_2dh(sr)
sums(nzb+13,pr_palm) = sums(nzb+13,pr_palm) / & ! ss
ngp_2dh(sr)
sums(nzb+14,pr_palm) = sums(nzb+14,pr_palm) / & ! surface temperature
ngp_2dh(sr)
!-- eges, e*
sums(nzb+4:nzb+5,pr_palm) = sums(nzb+4:nzb+5,pr_palm) / &
ngp_3d(sr)
!-- Old and new divergence
sums(nzb+9:nzb+10,pr_palm) = sums(nzb+9:nzb+10,pr_palm) / &
ngp_3d_inner(sr)
!-- User-defined profiles
IF ( max_pr_user > 0 ) THEN
DO k = nzb, nzt+1
sums(k,pr_palm+1:pr_palm+max_pr_user) = &
sums(k,pr_palm+1:pr_palm+max_pr_user) / &
ngp_2dh_s_inner(k,sr)
ENDDO
ENDIF
IF ( air_chemistry ) THEN
IF ( max_pr_cs > 0 ) THEN
DO k = nzb, nzt+1
sums(k, pr_palm+1:pr_palm+max_pr_user+max_pr_cs) = &
sums(k, pr_palm+1:pr_palm+max_pr_user+max_pr_cs) / &
ngp_2dh_s_inner(k,sr)
ENDDO
ENDIF
ENDIF
IF ( salsa ) THEN
IF ( max_pr_salsa > 0 ) THEN
DO k = nzb, nzt+1
sums(k,pr_palm+max_pr_user+max_pr_cs+1:pr_palm+max_pr_user+max_pr_cs+max_pr_salsa) = &
sums(k,pr_palm+max_pr_user+max_pr_cs+1:pr_palm+max_pr_user+max_pr_cs+max_pr_salsa) &
/ ngp_2dh_s_inner(k,sr)
ENDDO
ENDIF
ENDIF
!
!-- Collect horizontal average in hom.
!-- Compute deduced averages (e.g. total heat flux)
hom(:,1,3,sr) = sums(:,3) ! w
hom(:,1,8,sr) = sums(:,8) ! e profiles 5-7 are initial profiles
hom(:,1,9,sr) = sums(:,9) ! km
hom(:,1,10,sr) = sums(:,10) ! kh
hom(:,1,11,sr) = sums(:,11) ! l
hom(:,1,12,sr) = sums(:,12) ! w"u"
hom(:,1,13,sr) = sums(:,13) ! w*u*
hom(:,1,14,sr) = sums(:,14) ! w"v"
hom(:,1,15,sr) = sums(:,15) ! w*v*
hom(:,1,16,sr) = sums(:,16) ! w"pt"
hom(:,1,17,sr) = sums(:,17) ! w*pt*
hom(:,1,18,sr) = sums(:,16) + sums(:,17) ! wpt
hom(:,1,19,sr) = sums(:,12) + sums(:,13) ! wu
hom(:,1,20,sr) = sums(:,14) + sums(:,15) ! wv
hom(:,1,21,sr) = sums(:,21) ! w*pt*BC
hom(:,1,22,sr) = sums(:,16) + sums(:,21) ! wptBC
! profile 24 is initial profile (sa)
! profiles 25-29 left empty for initial
! profiles
hom(:,1,30,sr) = sums(:,30) ! u*2
hom(:,1,31,sr) = sums(:,31) ! v*2
hom(:,1,32,sr) = sums(:,32) ! w*2
hom(:,1,33,sr) = sums(:,33) ! pt*2
hom(:,1,34,sr) = sums(:,34) ! e*
hom(:,1,35,sr) = sums(:,35) ! w*2pt*
hom(:,1,36,sr) = sums(:,36) ! w*pt*2
hom(:,1,37,sr) = sums(:,37) ! w*e*
hom(:,1,38,sr) = sums(:,38) ! w*3
hom(:,1,39,sr) = sums(:,38) / ( abs( sums(:,32) ) + 1E-20_wp )**1.5_wp ! Sw
hom(:,1,40,sr) = sums(:,40) ! p
hom(:,1,45,sr) = sums(:,45) ! w"vpt"
hom(:,1,46,sr) = sums(:,46) ! w*vpt*
hom(:,1,47,sr) = sums(:,45) + sums(:,46) ! wvpt
hom(:,1,48,sr) = sums(:,48) ! w"q" (w"qv")
hom(:,1,49,sr) = sums(:,49) ! w*q* (w*qv*)
hom(:,1,50,sr) = sums(:,48) + sums(:,49) ! wq (wqv)
hom(:,1,51,sr) = sums(:,51) ! w"qv"
hom(:,1,52,sr) = sums(:,52) ! w*qv*
hom(:,1,53,sr) = sums(:,52) + sums(:,51) ! wq (wqv)
hom(:,1,54,sr) = sums(:,54) ! ql
hom(:,1,55,sr) = sums(:,55) ! w*u*u*/dz
hom(:,1,56,sr) = sums(:,56) ! w*p*/dz
hom(:,1,57,sr) = sums(:,57) ! ( w"e + w"p"/rho_ocean )/dz
hom(:,1,58,sr) = sums(:,58) ! u"pt"
hom(:,1,59,sr) = sums(:,59) ! u*pt*
hom(:,1,60,sr) = sums(:,58) + sums(:,59) ! upt_t
hom(:,1,61,sr) = sums(:,61) ! v"pt"
hom(:,1,62,sr) = sums(:,62) ! v*pt*
hom(:,1,63,sr) = sums(:,61) + sums(:,62) ! vpt_t
hom(:,1,64,sr) = sums(:,64) ! rho_ocean
hom(:,1,65,sr) = sums(:,65) ! w"sa"
hom(:,1,66,sr) = sums(:,66) ! w*sa*
hom(:,1,67,sr) = sums(:,65) + sums(:,66) ! wsa
hom(:,1,68,sr) = sums(:,68) ! w*p*
hom(:,1,69,sr) = sums(:,69) ! w"e + w"p"/rho_ocean
hom(:,1,70,sr) = sums(:,70) ! q*2
hom(:,1,71,sr) = sums(:,71) ! prho
hom(:,1,72,sr) = hyp * 1E-2_wp ! hyp in hPa
hom(:,1,123,sr) = sums(:,123) ! nc
hom(:,1,124,sr) = sums(:,124) ! ni
hom(:,1,125,sr) = sums(:,125) ! qi
hom(:,1,73,sr) = sums(:,73) ! nr
hom(:,1,74,sr) = sums(:,74) ! qr
hom(:,1,75,sr) = sums(:,75) ! qc
hom(:,1,76,sr) = sums(:,76) ! prr (precipitation rate)
! 77 is initial density profile
hom(:,1,78,sr) = ug ! ug
hom(:,1,79,sr) = vg ! vg
hom(:,1,80,sr) = w_subs ! w_subs
IF ( large_scale_forcing ) THEN
hom(:,1,81,sr) = sums_ls_l(:,0) ! td_lsa_lpt
hom(:,1,82,sr) = sums_ls_l(:,1) ! td_lsa_q
IF ( use_subsidence_tendencies ) THEN
hom(:,1,83,sr) = sums_ls_l(:,2) ! td_sub_lpt
hom(:,1,84,sr) = sums_ls_l(:,3) ! td_sub_q
ELSE
hom(:,1,83,sr) = sums(:,83) ! td_sub_lpt
hom(:,1,84,sr) = sums(:,84) ! td_sub_q
ENDIF
hom(:,1,85,sr) = sums(:,85) ! td_nud_lpt
hom(:,1,86,sr) = sums(:,86) ! td_nud_q
hom(:,1,87,sr) = sums(:,87) ! td_nud_u
hom(:,1,88,sr) = sums(:,88) ! td_nud_v
ENDIF
IF ( land_surface ) THEN
hom(:,1,89,sr) = sums(:,89) ! t_soil
! 90 is initial t_soil profile
hom(:,1,91,sr) = sums(:,91) ! m_soil
! 92 is initial m_soil profile
hom(:,1,93,sr) = sums(:,93) ! ghf
hom(:,1,94,sr) = sums(:,94) ! qsws_liq
hom(:,1,95,sr) = sums(:,95) ! qsws_soil
hom(:,1,96,sr) = sums(:,96) ! qsws_veg
hom(:,1,97,sr) = sums(:,97) ! r_a
hom(:,1,98,sr) = sums(:,98) ! r_s
ENDIF
IF ( radiation ) THEN
hom(:,1,99,sr) = sums(:,99) ! rad_net
hom(:,1,100,sr) = sums(:,100) ! rad_lw_in
hom(:,1,101,sr) = sums(:,101) ! rad_lw_out
hom(:,1,102,sr) = sums(:,102) ! rad_sw_in
hom(:,1,103,sr) = sums(:,103) ! rad_sw_out
IF ( radiation_scheme == 'rrtmg' ) THEN
hom(:,1,104,sr) = sums(:,104) ! rad_lw_cs_hr
hom(:,1,105,sr) = sums(:,105) ! rad_lw_hr
hom(:,1,106,sr) = sums(:,106) ! rad_sw_cs_hr
hom(:,1,107,sr) = sums(:,107) ! rad_sw_hr
hom(:,1,108,sr) = sums(:,108) ! rrtm_aldif
hom(:,1,109,sr) = sums(:,109) ! rrtm_aldir
hom(:,1,110,sr) = sums(:,110) ! rrtm_asdif
hom(:,1,111,sr) = sums(:,111) ! rrtm_asdir
ENDIF
ENDIF
hom(:,1,112,sr) = sums(:,112) !: L
IF ( passive_scalar ) THEN
hom(:,1,117,sr) = sums(:,117) ! w"s"
hom(:,1,114,sr) = sums(:,114) ! w*s*
hom(:,1,118,sr) = sums(:,117) + sums(:,114) ! ws
hom(:,1,116,sr) = sums(:,116) ! s*2
ENDIF
hom(:,1,119,sr) = rho_air ! rho_air in Kg/m^3
hom(:,1,120,sr) = rho_air_zw ! rho_air_zw in Kg/m^3
IF ( kolmogorov_length_scale ) THEN
hom(:,1,121,sr) = sums(:,121) * 1E3_wp ! eta in mm
ENDIF
hom(:,1,pr_palm,sr) = sums(:,pr_palm)
! u*, w'u', w'v', t* (in last profile)
IF ( max_pr_user > 0 ) THEN ! user-defined profiles
hom(:,1,pr_palm+1:pr_palm+max_pr_user,sr) = &
sums(:,pr_palm+1:pr_palm+max_pr_user)
ENDIF
IF ( air_chemistry ) THEN
IF ( max_pr_cs > 0 ) THEN ! chem_spcs profiles
hom(:, 1, pr_palm+max_pr_user+1:pr_palm + max_pr_user+max_pr_cs, sr) = &
sums(:, pr_palm+max_pr_user+1:pr_palm+max_pr_user+max_pr_cs)
ENDIF
ENDIF
IF ( salsa ) THEN
IF ( max_pr_salsa > 0 ) THEN ! salsa profiles
hom(:,1,pr_palm+max_pr_user+max_pr_cs+1:pr_palm+max_pr_user+max_pr_cs+max_pr_salsa, sr) = &
sums(:,pr_palm+max_pr_user+max_pr_cs+1:pr_palm+max_pr_user+max_pr_cs+max_pr_salsa)
ENDIF
ENDIF
!
!-- Determine the boundary layer height using two different schemes.
!-- First scheme: Starting from the Earth's (Ocean's) surface, look for the
!-- first relative minimum (maximum) of the total heat flux.
!-- The corresponding height is assumed as the boundary layer height, if it
!-- is less than 1.5 times the height where the heat flux becomes negative
!-- (positive) for the first time. Attention: the resolved vertical sensible
!-- heat flux (hom(:,1,17,sr) = w*pt*) is not known at the beginning because
!-- the calculation happens in advec_s_ws which is called after
!-- flow_statistics. Therefore z_i is directly taken from restart data at
!-- the beginning of restart runs.
IF ( TRIM( initializing_actions ) /= 'read_restart_data' .OR. &
simulated_time_at_begin /= simulated_time ) THEN
z_i(1) = 0.0_wp
first = .TRUE.
IF ( ocean_mode ) THEN
DO k = nzt, nzb+1, -1
IF ( first .AND. hom(k,1,18,sr) < -1.0E-8_wp ) THEN
first = .FALSE.
height = zw(k)
ENDIF
IF ( hom(k,1,18,sr) < -1.0E-8_wp .AND. &
hom(k-1,1,18,sr) > hom(k,1,18,sr) ) THEN
IF ( zw(k) < 1.5_wp * height ) THEN
z_i(1) = zw(k)
ELSE
z_i(1) = height
ENDIF
EXIT
ENDIF
ENDDO
ELSE
DO k = nzb, nzt-1
IF ( first .AND. hom(k,1,18,sr) < -1.0E-8_wp ) THEN
first = .FALSE.
height = zw(k)
ENDIF
IF ( hom(k,1,18,sr) < -1.0E-8_wp .AND. &
hom(k+1,1,18,sr) > hom(k,1,18,sr) ) THEN
IF ( zw(k) < 1.5_wp * height ) THEN
z_i(1) = zw(k)
ELSE
z_i(1) = height
ENDIF
EXIT
ENDIF
ENDDO
ENDIF
!
!-- Second scheme: Gradient scheme from Sullivan et al. (1998), modified
!-- by Uhlenbrock(2006). The boundary layer height is the height with the
!-- maximal local temperature gradient: starting from the second (the
!-- last but one) vertical gridpoint, the local gradient must be at least
!-- 0.2K/100m and greater than the next four gradients.
!-- WARNING: The threshold value of 0.2K/100m must be adjusted for the
!-- ocean case!
z_i(2) = 0.0_wp
DO k = nzb+1, nzt+1
dptdz(k) = ( hom(k,1,4,sr) - hom(k-1,1,4,sr) ) * ddzu(k)
ENDDO
dptdz_threshold = 0.2_wp / 100.0_wp
IF ( ocean_mode ) THEN
DO k = nzt+1, nzb+5, -1
IF ( dptdz(k) > dptdz_threshold .AND. &
dptdz(k) > dptdz(k-1) .AND. dptdz(k) > dptdz(k-2) .AND.&
dptdz(k) > dptdz(k-3) .AND. dptdz(k) > dptdz(k-4) ) THEN
z_i(2) = zw(k-1)
EXIT
ENDIF
ENDDO
ELSE
DO k = nzb+1, nzt-3
IF ( dptdz(k) > dptdz_threshold .AND. &
dptdz(k) > dptdz(k+1) .AND. dptdz(k) > dptdz(k+2) .AND.&
dptdz(k) > dptdz(k+3) .AND. dptdz(k) > dptdz(k+4) ) THEN
z_i(2) = zw(k-1)
EXIT
ENDIF
ENDDO
ENDIF
ENDIF
hom(nzb+6,1,pr_palm,sr) = z_i(1)
hom(nzb+7,1,pr_palm,sr) = z_i(2)
!
!-- Determine vertical index which is nearest to the mean surface level
!-- height of the respective statistic region
DO k = nzb, nzt
IF ( zw(k) >= mean_surface_level_height(sr) ) THEN
k_surface_level = k
EXIT
ENDIF
ENDDO
!
!-- Computation of both the characteristic vertical velocity and
!-- the characteristic convective boundary layer temperature.
!-- The inversion height entering into the equation is defined with respect
!-- to the mean surface level height of the respective statistic region.
!-- The horizontal average at surface level index + 1 is input for the
!-- average temperature.
IF ( hom(k_surface_level,1,18,sr) > 1.0E-8_wp .AND. z_i(1) /= 0.0_wp )&
THEN
hom(nzb+8,1,pr_palm,sr) = &
( g / hom(k_surface_level+1,1,4,sr) * &
( hom(k_surface_level,1,18,sr) / &
( heatflux_output_conversion(nzb) * rho_air(nzb) ) ) &
* ABS( z_i(1) - mean_surface_level_height(sr) ) )**0.333333333_wp
ELSE
hom(nzb+8,1,pr_palm,sr) = 0.0_wp
ENDIF
!
!-- Collect the time series quantities. Please note, timeseries quantities
!-- which are collected from horizontally averaged profiles, e.g. wpt
!-- or pt(zp), are treated specially. In case of elevated model surfaces,
!-- index nzb+1 might be within topography and data will be zero. Therefore,
!-- take value for the first atmosphere index, which is topo_min_level+1.
ts_value(1,sr) = hom(nzb+4,1,pr_palm,sr) ! E
ts_value(2,sr) = hom(nzb+5,1,pr_palm,sr) ! E*
ts_value(3,sr) = dt_3d
ts_value(4,sr) = hom(nzb,1,pr_palm,sr) ! u*
ts_value(5,sr) = hom(nzb+3,1,pr_palm,sr) ! th*
ts_value(6,sr) = u_max
ts_value(7,sr) = v_max
ts_value(8,sr) = w_max
ts_value(9,sr) = hom(nzb+10,1,pr_palm,sr) ! new divergence
ts_value(10,sr) = hom(nzb+9,1,pr_palm,sr) ! old Divergence
ts_value(11,sr) = hom(nzb+6,1,pr_palm,sr) ! z_i(1)
ts_value(12,sr) = hom(nzb+7,1,pr_palm,sr) ! z_i(2)
ts_value(13,sr) = hom(nzb+8,1,pr_palm,sr) ! w*
ts_value(14,sr) = hom(nzb,1,16,sr) ! w'pt' at k=0
ts_value(15,sr) = hom(topo_min_level+1,1,16,sr) ! w'pt' at k=1
ts_value(16,sr) = hom(topo_min_level+1,1,18,sr) ! wpt at k=1
ts_value(17,sr) = hom(nzb+14,1,pr_palm,sr) ! pt(0)
ts_value(18,sr) = hom(topo_min_level+1,1,4,sr) ! pt(zp)
ts_value(19,sr) = hom(nzb+1,1,pr_palm,sr) ! u'w' at k=0
ts_value(20,sr) = hom(nzb+2,1,pr_palm,sr) ! v'w' at k=0
ts_value(21,sr) = hom(nzb,1,48,sr) ! w"q" at k=0
IF ( .NOT. neutral ) THEN
ts_value(22,sr) = hom(nzb,1,112,sr) ! L
ELSE
ts_value(22,sr) = 1.0E10_wp
ENDIF
ts_value(23,sr) = hom(nzb+12,1,pr_palm,sr) ! q*
IF ( passive_scalar ) THEN
ts_value(24,sr) = hom(nzb+13,1,117,sr) ! w"s" ( to do ! )
ts_value(25,sr) = hom(nzb+13,1,pr_palm,sr) ! s*
ENDIF
!
!-- Collect land surface model timeseries
IF ( land_surface ) THEN
ts_value(dots_soil ,sr) = hom(nzb,1,93,sr) ! ghf
ts_value(dots_soil+1,sr) = hom(nzb,1,94,sr) ! qsws_liq
ts_value(dots_soil+2,sr) = hom(nzb,1,95,sr) ! qsws_soil
ts_value(dots_soil+3,sr) = hom(nzb,1,96,sr) ! qsws_veg
ts_value(dots_soil+4,sr) = hom(nzb,1,97,sr) ! r_a
ts_value(dots_soil+5,sr) = hom(nzb,1,98,sr) ! r_s
ENDIF
!
!-- Collect radiation model timeseries
IF ( radiation ) THEN
ts_value(dots_rad,sr) = hom(nzb,1,99,sr) ! rad_net
ts_value(dots_rad+1,sr) = hom(nzb,1,100,sr) ! rad_lw_in
ts_value(dots_rad+2,sr) = hom(nzb,1,101,sr) ! rad_lw_out
ts_value(dots_rad+3,sr) = hom(nzb,1,102,sr) ! rad_sw_in
ts_value(dots_rad+4,sr) = hom(nzb,1,103,sr) ! rad_sw_out
IF ( radiation_scheme == 'rrtmg' ) THEN
ts_value(dots_rad+5,sr) = hom(nzb,1,108,sr) ! rrtm_aldif
ts_value(dots_rad+6,sr) = hom(nzb,1,109,sr) ! rrtm_aldir
ts_value(dots_rad+7,sr) = hom(nzb,1,110,sr) ! rrtm_asdif
ts_value(dots_rad+8,sr) = hom(nzb,1,111,sr) ! rrtm_asdir
ENDIF
ENDIF
!
!-- Calculate additional statistics provided by other modules
CALL module_interface_statistics( 'time_series', sr, 0, dots_max )
ENDDO ! loop of the subregions
!
!-- If required, sum up horizontal averages for subsequent time averaging.
!-- Do not sum, if flow statistics is called before the first initial time step.
IF ( do_sum .AND. simulated_time /= 0.0_wp ) THEN
IF ( average_count_pr == 0 ) hom_sum = 0.0_wp
hom_sum = hom_sum + hom(:,1,:,:)
average_count_pr = average_count_pr + 1
do_sum = .FALSE.
ENDIF
!
!-- Set flag for other UPs (e.g. output routines, but also buoyancy).
!-- This flag is reset after each time step in time_integration.
flow_statistics_called = .TRUE.
CALL cpu_log( log_point(10), 'flow_statistics', 'stop' )
END SUBROUTINE flow_statistics