Home

Context Navigation

source: palm/trunk/SOURCE/flow_statistics.f90 @ 4464

Last change on this file since 4464 was 4464, checked in by Giersch, 4 years ago
Reset last change (r4463)
Property svn:keywords set to `Id`
File size: 106.7 KB

Rev	Line
[1682]	1	!> @file flow_statistics.f90
[2000]	2	!------------------------------------------------------------------------------!
[2696]	3	! This file is part of the PALM model system.
[1036]	4	!
[2000]	5	! PALM is free software: you can redistribute it and/or modify it under the
	6	! terms of the GNU General Public License as published by the Free Software
	7	! Foundation, either version 3 of the License, or (at your option) any later
	8	! version.
[1036]	9	!
	10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
	11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
	12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
	13	!
	14	! You should have received a copy of the GNU General Public License along with
	15	! PALM. If not, see <http://www.gnu.org/licenses/>.
	16	!
[4360]	17	! Copyright 1997-2020 Leibniz Universitaet Hannover
[2000]	18	!------------------------------------------------------------------------------!
[1036]	19	!
[254]	20	! Current revisions:
[3298]	21	! ------------------
[1961]	22	!
[4442]	23	!
[1739]	24	! Former revisions:
	25	! -----------------
	26	! $Id: flow_statistics.f90 4464 2020-03-17 11:08:46Z Giersch $
[4464]	27	! Reset last change (r4463)
	28	!
	29	! 4463 2020-03-17 09:27:36Z Giersch
	30	! Calculate horizontally averaged profiles of all velocity components at the
[4463]	31	! same place
[4464]	32	!
[4463]	33	! 4444 2020-03-05 15:59:50Z raasch
[4444]	34	! bugfix: cpp-directives for serial mode added
	35	!
	36	! 4442 2020-03-04 19:21:13Z suehring
[4442]	37	! Change order of dimension in surface array %frac to allow for better
	38	! vectorization.
	39	!
	40	! 4441 2020-03-04 19:20:35Z suehring
[4346]	41	! Introduction of wall_flags_total_0, which currently sets bits based on static
	42	! topography information used in wall_flags_static_0
	43	!
	44	! 4329 2019-12-10 15:46:36Z motisi
[4329]	45	! Renamed wall_flags_0 to wall_flags_static_0
	46	!
	47	! 4182 2019-08-22 15:20:23Z scharf
[4182]	48	! Corrected "Former revisions" section
	49	!
	50	! 4131 2019-08-02 11:06:18Z monakurppa
[4131]	51	! Allow profile output for salsa variables.
	52	!
	53	! 4039 2019-06-18 10:32:41Z suehring
[4039]	54	! Correct conversion to kinematic scalar fluxes in case of pw-scheme and
	55	! statistic regions
	56	!
	57	! 3828 2019-03-27 19:36:23Z raasch
[3828]	58	! unused variables removed
	59	!
	60	! 3676 2019-01-16 15:07:05Z knoop
[3651]	61	! Bugfix, terminate OMP Parallel block
[3298]	62	!
[4182]	63	! Revision 1.1 1997/08/11 06:15:17 raasch
	64	! Initial revision
	65	!
	66	!
[1]	67	! Description:
	68	! ------------
[1682]	69	!> Compute average profiles and further average flow quantities for the different
	70	!> user-defined (sub-)regions. The region indexed 0 is the total model domain.
	71	!>
	72	!> @note For simplicity, nzb_s_inner and nzb_diff_s_inner are being used as a
	73	!> lower vertical index for k-loops for all variables, although strictly
	74	!> speaking the k-loops would have to be split up according to the staggered
	75	!> grid. However, this implies no error since staggered velocity components
	76	!> are zero at the walls and inside buildings.
[1]	77	!------------------------------------------------------------------------------!
[1682]	78	SUBROUTINE flow_statistics
[1]	79
[3298]	80
[1320]	81	USE arrays_3d, &
[2037]	82	ONLY: ddzu, ddzw, e, heatflux_output_conversion, hyp, km, kh, &
[2292]	83	momentumflux_output_conversion, nc, nr, p, prho, prr, pt, q, &
[2232]	84	qc, ql, qr, rho_air, rho_air_zw, rho_ocean, s, &
[3274]	85	sa, u, ug, v, vg, vpt, w, w_subs, waterflux_output_conversion, &
	86	zw, d_exner
[3298]	87
[3274]	88	USE basic_constants_and_equations_mod, &
[3298]	89	ONLY: g, lv_d_cp
	90
[3637]	91	USE bulk_cloud_model_mod, &
	92	ONLY: bulk_cloud_model, microphysics_morrison, microphysics_seifert
[3298]	93
	94	USE chem_modules, &
	95	ONLY: max_pr_cs
	96
[1320]	97	USE control_parameters, &
[3298]	98	ONLY: air_chemistry, average_count_pr, cloud_droplets, do_sum, &
[3274]	99	dt_3d, humidity, initializing_actions, land_surface, &
[3003]	100	large_scale_forcing, large_scale_subsidence, max_pr_user, &
[3294]	101	message_string, neutral, ocean_mode, passive_scalar, &
	102	simulated_time, simulated_time_at_begin, &
	103	use_subsidence_tendencies, use_surface_fluxes, use_top_fluxes, &
[4131]	104	ws_scheme_mom, ws_scheme_sca, salsa, max_pr_salsa
[3298]	105
[1320]	106	USE cpulog, &
[1551]	107	ONLY: cpu_log, log_point
[3298]	108
[1320]	109	USE grid_variables, &
[1551]	110	ONLY: ddx, ddy
[1320]	111
	112	USE indices, &
[4444]	113	ONLY: ngp_2dh, ngp_2dh_s_inner, ngp_3d, ngp_3d_inner, nxl, nxr, nyn, &
	114	nys, nzb, nzt, topo_min_level, wall_flags_total_0
	115
	116	#if defined( __parallel )
	117	USE indices, &
	118	ONLY: ngp_sums, ngp_sums_ls
	119	#endif
[1320]	120
	121	USE kinds
	122
[1551]	123	USE land_surface_model_mod, &
[2232]	124	ONLY: m_soil_h, nzb_soil, nzt_soil, t_soil_h
[1551]	125
[2320]	126	USE lsf_nudging_mod, &
	127	ONLY: td_lsa_lpt, td_lsa_q, td_sub_lpt, td_sub_q, time_vert
	128
[3637]	129	USE module_interface, &
	130	ONLY: module_interface_statistics
	131
[1783]	132	USE netcdf_interface, &
[2817]	133	ONLY: dots_rad, dots_soil, dots_max
[1783]	134
[1]	135	USE pegrid
[1551]	136
	137	USE radiation_model_mod, &
[2696]	138	ONLY: radiation, radiation_scheme, &
[1691]	139	rad_lw_in, rad_lw_out, rad_lw_cs_hr, rad_lw_hr, &
	140	rad_sw_in, rad_sw_out, rad_sw_cs_hr, rad_sw_hr
[1585]	141
[1]	142	USE statistics
	143
[3828]	144	USE surface_mod, &
	145	ONLY : surf_def_h, surf_lsm_h, surf_usm_h
[1691]	146
[2232]	147
[1]	148	IMPLICIT NONE
	149
[1682]	150	INTEGER(iwp) :: i !<
	151	INTEGER(iwp) :: j !<
	152	INTEGER(iwp) :: k !<
[2232]	153	INTEGER(iwp) :: ki !<
[1738]	154	INTEGER(iwp) :: k_surface_level !<
[2232]	155	INTEGER(iwp) :: m !< loop variable over all horizontal wall elements
	156	INTEGER(iwp) :: l !< loop variable over surface facing -- up- or downward-facing
[1682]	157	INTEGER(iwp) :: nt !<
[3241]	158	!$ INTEGER(iwp) :: omp_get_thread_num !<
[1682]	159	INTEGER(iwp) :: sr !<
	160	INTEGER(iwp) :: tn !<
[2232]	161
[1682]	162	LOGICAL :: first !<
[1320]	163
[1682]	164	REAL(wp) :: dptdz_threshold !<
	165	REAL(wp) :: fac !<
[2232]	166	REAL(wp) :: flag !<
[1682]	167	REAL(wp) :: height !<
	168	REAL(wp) :: pts !<
	169	REAL(wp) :: sums_l_etot !<
	170	REAL(wp) :: ust !<
	171	REAL(wp) :: ust2 !<
	172	REAL(wp) :: u2 !<
	173	REAL(wp) :: vst !<
	174	REAL(wp) :: vst2 !<
	175	REAL(wp) :: v2 !<
	176	REAL(wp) :: w2 !<
[1320]	177
[1682]	178	REAL(wp) :: dptdz(nzb+1:nzt+1) !<
	179	REAL(wp) :: sums_ll(nzb:nzt+1,2) !<
[1]	180
	181	CALL cpu_log( log_point(10), 'flow_statistics', 'start' )
	182
[1221]	183
[1]	184	!
	185	!-- To be on the safe side, check whether flow_statistics has already been
	186	!-- called once after the current time step
	187	IF ( flow_statistics_called ) THEN
[254]	188
[274]	189	message_string = 'flow_statistics is called two times within one ' // &
	190	'timestep'
[254]	191	CALL message( 'flow_statistics', 'PA0190', 1, 2, 0, 6, 0 )
[1007]	192
[1]	193	ENDIF
	194
	195	!
	196	!-- Compute statistics for each (sub-)region
	197	DO sr = 0, statistic_regions
	198
	199	!
	200	!-- Initialize (local) summation array
[1353]	201	sums_l = 0.0_wp
[3658]	202	#ifdef _OPENACC
	203	!$ACC KERNELS PRESENT(sums_l)
	204	sums_l = 0.0_wp
	205	!$ACC END KERNELS
	206	#endif
[1]	207
	208	!
	209	!-- Store sums that have been computed in other subroutines in summation
	210	!-- array
	211	sums_l(:,11,:) = sums_l_l(:,sr,:) ! mixing length from diffusivities
	212	!-- WARNING: next line still has to be adjusted for OpenMP
[2037]	213	sums_l(:,21,0) = sums_wsts_bc_l(:,sr) * &
	214	heatflux_output_conversion ! heat flux from advec_s_bc
[87]	215	sums_l(nzb+9,pr_palm,0) = sums_divold_l(sr) ! old divergence from pres
	216	sums_l(nzb+10,pr_palm,0) = sums_divnew_l(sr) ! new divergence from pres
[1]	217
[667]	218	!
[1498]	219	!-- When calcuating horizontally-averaged total (resolved- plus subgrid-
	220	!-- scale) vertical fluxes and velocity variances by using commonly-
	221	!-- applied Reynolds-based methods ( e.g. <w'pt'> = (w-<w>)*(pt-<pt>) )
	222	!-- in combination with the 5th order advection scheme, pronounced
	223	!-- artificial kinks could be observed in the vertical profiles near the
	224	!-- surface. Please note: these kinks were not related to the model truth,
	225	!-- i.e. these kinks are just related to an evaluation problem.
	226	!-- In order avoid these kinks, vertical fluxes and horizontal as well
	227	!-- vertical velocity variances are calculated directly within the advection
	228	!-- routines, according to the numerical discretization, to evaluate the
	229	!-- statistical quantities as they will appear within the prognostic
	230	!-- equations.
[667]	231	!-- Copy the turbulent quantities, evaluated in the advection routines to
[1498]	232	!-- the local array sums_l() for further computations.
[743]	233	IF ( ws_scheme_mom .AND. sr == 0 ) THEN
[696]	234
[1007]	235	!
[673]	236	!-- According to the Neumann bc for the horizontal velocity components,
	237	!-- the corresponding fluxes has to satisfiy the same bc.
[3294]	238	IF ( ocean_mode ) THEN
[801]	239	sums_us2_ws_l(nzt+1,:) = sums_us2_ws_l(nzt,:)
[1007]	240	sums_vs2_ws_l(nzt+1,:) = sums_vs2_ws_l(nzt,:)
[673]	241	ENDIF
[696]	242
	243	DO i = 0, threads_per_task-1
[1007]	244	!
[696]	245	!-- Swap the turbulent quantities evaluated in advec_ws.
[2037]	246	sums_l(:,13,i) = sums_wsus_ws_l(:,i) &
	247	* momentumflux_output_conversion ! wu
	248	sums_l(:,15,i) = sums_wsvs_ws_l(:,i) &
	249	* momentumflux_output_conversion ! wv
[801]	250	sums_l(:,30,i) = sums_us2_ws_l(:,i) ! u*2
	251	sums_l(:,31,i) = sums_vs2_ws_l(:,i) ! v*2
	252	sums_l(:,32,i) = sums_ws2_ws_l(:,i) ! w*2
[1353]	253	sums_l(:,34,i) = sums_l(:,34,i) + 0.5_wp * &
[1320]	254	( sums_us2_ws_l(:,i) + sums_vs2_ws_l(:,i) + &
[801]	255	sums_ws2_ws_l(:,i) ) ! e*
[667]	256	ENDDO
[696]	257
[667]	258	ENDIF
[696]	259
[1567]	260	IF ( ws_scheme_sca .AND. sr == 0 ) THEN
[696]	261
	262	DO i = 0, threads_per_task-1
[2037]	263	sums_l(:,17,i) = sums_wspts_ws_l(:,i) &
	264	* heatflux_output_conversion ! wpt
[3294]	265	IF ( ocean_mode ) sums_l(:,66,i) = sums_wssas_ws_l(:,i) ! wsa
[2037]	266	IF ( humidity ) sums_l(:,49,i) = sums_wsqs_ws_l(:,i) &
	267	* waterflux_output_conversion ! wq
[2270]	268	IF ( passive_scalar ) sums_l(:,114,i) = sums_wsss_ws_l(:,i) ! ws
[696]	269	ENDDO
	270
[667]	271	ENDIF
[305]	272	!
[4464]	273	!-- Horizontally averaged profiles of horizontal velocities and temperature.
[1]	274	!-- They must have been computed before, because they are already required
	275	!-- for other horizontal averages.
	276	tn = 0
[2232]	277	!$OMP PARALLEL PRIVATE( i, j, k, tn, flag )
	278	!$ tn = omp_get_thread_num()
[1]	279	!$OMP DO
[3658]	280	!$ACC PARALLEL LOOP COLLAPSE(3) PRIVATE(i, j, k, flag) &
[4346]	281	!$ACC PRESENT(wall_flags_total_0, u, v, pt, rmask, sums_l)
[1]	282	DO i = nxl, nxr
	283	DO j = nys, nyn
[2232]	284	DO k = nzb, nzt+1
[4346]	285	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 22 ) )
[3658]	286	!$ACC ATOMIC
[2232]	287	sums_l(k,1,tn) = sums_l(k,1,tn) + u(k,j,i) * rmask(j,i,sr) &
	288	* flag
[3658]	289	!$ACC ATOMIC
[2232]	290	sums_l(k,2,tn) = sums_l(k,2,tn) + v(k,j,i) * rmask(j,i,sr) &
	291	* flag
[3658]	292	!$ACC ATOMIC
[2232]	293	sums_l(k,4,tn) = sums_l(k,4,tn) + pt(k,j,i) * rmask(j,i,sr) &
	294	* flag
[1]	295	ENDDO
	296	ENDDO
	297	ENDDO
[4464]	298	!$ACC UPDATE HOST(sums_l(:,1,tn), sums_l(:,2,tn), sums_l(:,4,tn))
[1]	299
	300	!
[96]	301	!-- Horizontally averaged profile of salinity
[3294]	302	IF ( ocean_mode ) THEN
[96]	303	!$OMP DO
	304	DO i = nxl, nxr
	305	DO j = nys, nyn
[2232]	306	DO k = nzb, nzt+1
	307	sums_l(k,23,tn) = sums_l(k,23,tn) + sa(k,j,i) &
	308	* rmask(j,i,sr) &
	309	* MERGE( 1.0_wp, 0.0_wp, &
[4346]	310	BTEST( wall_flags_total_0(k,j,i), 22 ) )
[96]	311	ENDDO
	312	ENDDO
	313	ENDDO
	314	ENDIF
	315
	316	!
[1]	317	!-- Horizontally averaged profiles of virtual potential temperature,
[3040]	318	!-- total water content, water vapor mixing ratio and liquid water potential
[1]	319	!-- temperature
[75]	320	IF ( humidity ) THEN
[1]	321	!$OMP DO
	322	DO i = nxl, nxr
	323	DO j = nys, nyn
[2232]	324	DO k = nzb, nzt+1
[4346]	325	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 22 ) )
[2232]	326	sums_l(k,44,tn) = sums_l(k,44,tn) + &
	327	vpt(k,j,i) * rmask(j,i,sr) * flag
	328	sums_l(k,41,tn) = sums_l(k,41,tn) + &
	329	q(k,j,i) * rmask(j,i,sr) * flag
[1]	330	ENDDO
	331	ENDDO
	332	ENDDO
[3274]	333	IF ( bulk_cloud_model ) THEN
[1]	334	!$OMP DO
	335	DO i = nxl, nxr
	336	DO j = nys, nyn
[2232]	337	DO k = nzb, nzt+1
[4346]	338	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 22 ) )
[2232]	339	sums_l(k,42,tn) = sums_l(k,42,tn) + &
	340	( q(k,j,i) - ql(k,j,i) ) * rmask(j,i,sr) &
	341	* flag
	342	sums_l(k,43,tn) = sums_l(k,43,tn) + ( &
[3274]	343	pt(k,j,i) + lv_d_cp * d_exner(k) * ql(k,j,i) &
[2232]	344	) * rmask(j,i,sr) &
	345	* flag
[1]	346	ENDDO
	347	ENDDO
	348	ENDDO
	349	ENDIF
	350	ENDIF
	351
	352	!
	353	!-- Horizontally averaged profiles of passive scalar
	354	IF ( passive_scalar ) THEN
	355	!$OMP DO
	356	DO i = nxl, nxr
	357	DO j = nys, nyn
[2232]	358	DO k = nzb, nzt+1
[2270]	359	sums_l(k,115,tn) = sums_l(k,115,tn) + s(k,j,i) &
[2232]	360	* rmask(j,i,sr) &
	361	* MERGE( 1.0_wp, 0.0_wp, &
[4346]	362	BTEST( wall_flags_total_0(k,j,i), 22 ) )
[1]	363	ENDDO
	364	ENDDO
	365	ENDDO
	366	ENDIF
	367	!$OMP END PARALLEL
	368	!
	369	!-- Summation of thread sums
	370	IF ( threads_per_task > 1 ) THEN
	371	DO i = 1, threads_per_task-1
	372	sums_l(:,1,0) = sums_l(:,1,0) + sums_l(:,1,i)
	373	sums_l(:,2,0) = sums_l(:,2,0) + sums_l(:,2,i)
	374	sums_l(:,4,0) = sums_l(:,4,0) + sums_l(:,4,i)
[3294]	375	IF ( ocean_mode ) THEN
[96]	376	sums_l(:,23,0) = sums_l(:,23,0) + sums_l(:,23,i)
	377	ENDIF
[75]	378	IF ( humidity ) THEN
[1]	379	sums_l(:,41,0) = sums_l(:,41,0) + sums_l(:,41,i)
	380	sums_l(:,44,0) = sums_l(:,44,0) + sums_l(:,44,i)
[3274]	381	IF ( bulk_cloud_model ) THEN
[1]	382	sums_l(:,42,0) = sums_l(:,42,0) + sums_l(:,42,i)
	383	sums_l(:,43,0) = sums_l(:,43,0) + sums_l(:,43,i)
	384	ENDIF
	385	ENDIF
	386	IF ( passive_scalar ) THEN
[2270]	387	sums_l(:,115,0) = sums_l(:,115,0) + sums_l(:,115,i)
[1]	388	ENDIF
	389	ENDDO
	390	ENDIF
	391
	392	#if defined( __parallel )
	393	!
	394	!-- Compute total sum from local sums
[622]	395	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[1320]	396	CALL MPI_ALLREDUCE( sums_l(nzb,1,0), sums(nzb,1), nzt+2-nzb, MPI_REAL, &
[1]	397	MPI_SUM, comm2d, ierr )
[622]	398	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[1320]	399	CALL MPI_ALLREDUCE( sums_l(nzb,2,0), sums(nzb,2), nzt+2-nzb, MPI_REAL, &
[1]	400	MPI_SUM, comm2d, ierr )
[622]	401	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[1320]	402	CALL MPI_ALLREDUCE( sums_l(nzb,4,0), sums(nzb,4), nzt+2-nzb, MPI_REAL, &
[1]	403	MPI_SUM, comm2d, ierr )
[3294]	404	IF ( ocean_mode ) THEN
[622]	405	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[1320]	406	CALL MPI_ALLREDUCE( sums_l(nzb,23,0), sums(nzb,23), nzt+2-nzb, &
[96]	407	MPI_REAL, MPI_SUM, comm2d, ierr )
	408	ENDIF
[75]	409	IF ( humidity ) THEN
[622]	410	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[1320]	411	CALL MPI_ALLREDUCE( sums_l(nzb,44,0), sums(nzb,44), nzt+2-nzb, &
[1]	412	MPI_REAL, MPI_SUM, comm2d, ierr )
[622]	413	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[1320]	414	CALL MPI_ALLREDUCE( sums_l(nzb,41,0), sums(nzb,41), nzt+2-nzb, &
[1]	415	MPI_REAL, MPI_SUM, comm2d, ierr )
[3274]	416	IF ( bulk_cloud_model ) THEN
[622]	417	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[1320]	418	CALL MPI_ALLREDUCE( sums_l(nzb,42,0), sums(nzb,42), nzt+2-nzb, &
[1]	419	MPI_REAL, MPI_SUM, comm2d, ierr )
[622]	420	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[1320]	421	CALL MPI_ALLREDUCE( sums_l(nzb,43,0), sums(nzb,43), nzt+2-nzb, &
[1]	422	MPI_REAL, MPI_SUM, comm2d, ierr )
	423	ENDIF
	424	ENDIF
	425
	426	IF ( passive_scalar ) THEN
[622]	427	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[2270]	428	CALL MPI_ALLREDUCE( sums_l(nzb,115,0), sums(nzb,115), nzt+2-nzb, &
[1]	429	MPI_REAL, MPI_SUM, comm2d, ierr )
	430	ENDIF
	431	#else
	432	sums(:,1) = sums_l(:,1,0)
	433	sums(:,2) = sums_l(:,2,0)
	434	sums(:,4) = sums_l(:,4,0)
[3294]	435	IF ( ocean_mode ) sums(:,23) = sums_l(:,23,0)
[75]	436	IF ( humidity ) THEN
[1]	437	sums(:,44) = sums_l(:,44,0)
	438	sums(:,41) = sums_l(:,41,0)
[3274]	439	IF ( bulk_cloud_model ) THEN
[1]	440	sums(:,42) = sums_l(:,42,0)
	441	sums(:,43) = sums_l(:,43,0)
	442	ENDIF
	443	ENDIF
[2270]	444	IF ( passive_scalar ) sums(:,115) = sums_l(:,115,0)
[1]	445	#endif
	446
	447	!
	448	!-- Final values are obtained by division by the total number of grid points
	449	!-- used for summation. After that store profiles.
[132]	450	sums(:,1) = sums(:,1) / ngp_2dh(sr)
	451	sums(:,2) = sums(:,2) / ngp_2dh(sr)
	452	sums(:,4) = sums(:,4) / ngp_2dh_s_inner(:,sr)
[1]	453	hom(:,1,1,sr) = sums(:,1) ! u
	454	hom(:,1,2,sr) = sums(:,2) ! v
	455	hom(:,1,4,sr) = sums(:,4) ! pt
[4464]	456	!$ACC UPDATE DEVICE(hom(:,1,1,sr), hom(:,1,2,sr), hom(:,1,4,sr))
	457
	458
[1]	459	!
[96]	460	!-- Salinity
[3294]	461	IF ( ocean_mode ) THEN
[132]	462	sums(:,23) = sums(:,23) / ngp_2dh_s_inner(:,sr)
[96]	463	hom(:,1,23,sr) = sums(:,23) ! sa
	464	ENDIF
	465
	466	!
[1]	467	!-- Humidity and cloud parameters
[75]	468	IF ( humidity ) THEN
[132]	469	sums(:,44) = sums(:,44) / ngp_2dh_s_inner(:,sr)
	470	sums(:,41) = sums(:,41) / ngp_2dh_s_inner(:,sr)
[1]	471	hom(:,1,44,sr) = sums(:,44) ! vpt
	472	hom(:,1,41,sr) = sums(:,41) ! qv (q)
[3274]	473	IF ( bulk_cloud_model ) THEN
[132]	474	sums(:,42) = sums(:,42) / ngp_2dh_s_inner(:,sr)
	475	sums(:,43) = sums(:,43) / ngp_2dh_s_inner(:,sr)
[1]	476	hom(:,1,42,sr) = sums(:,42) ! qv
	477	hom(:,1,43,sr) = sums(:,43) ! pt
	478	ENDIF
	479	ENDIF
	480
	481	!
	482	!-- Passive scalar
[2270]	483	IF ( passive_scalar ) hom(:,1,115,sr) = sums(:,115) / &
[1960]	484	ngp_2dh_s_inner(:,sr) ! s
[1]	485
	486	!
	487	!-- Horizontally averaged profiles of the remaining prognostic variables,
	488	!-- variances, the total and the perturbation energy (single values in last
	489	!-- column of sums_l) and some diagnostic quantities.
[132]	490	!-- NOTE: for simplicity, nzb_s_inner is used below, although strictly
[1]	491	!-- ---- speaking the following k-loop would have to be split up and
	492	!-- rearranged according to the staggered grid.
[132]	493	!-- However, this implies no error since staggered velocity components
	494	!-- are zero at the walls and inside buildings.
[1]	495	tn = 0
[3241]	496	!$OMP PARALLEL PRIVATE( i, j, k, pts, sums_ll, &
[1815]	497	!$OMP sums_l_etot, tn, ust, ust2, u2, vst, vst2, v2, &
[2232]	498	!$OMP w2, flag, m, ki, l )
	499	!$ tn = omp_get_thread_num()
[1]	500	!$OMP DO
[3658]	501	!$ACC PARALLEL LOOP COLLAPSE(2) PRIVATE(i, j, k, m) &
	502	!$ACC PRIVATE(sums_l_etot, flag) &
[4346]	503	!$ACC PRESENT(wall_flags_total_0, rmask, momentumflux_output_conversion) &
[3658]	504	!$ACC PRESENT(hom(:,1,4,sr)) &
	505	!$ACC PRESENT(e, u, v, w, km, kh, p, pt) &
	506	!$ACC PRESENT(surf_def_h(0), surf_lsm_h, surf_usm_h) &
	507	!$ACC PRESENT(sums_l)
[1]	508	DO i = nxl, nxr
	509	DO j = nys, nyn
[1353]	510	sums_l_etot = 0.0_wp
[2232]	511	DO k = nzb, nzt+1
[4346]	512	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 22 ) )
[1]	513	!
	514	!-- Prognostic and diagnostic variables
[3658]	515	!$ACC ATOMIC
[4464]	516	sums_l(k,3,tn) = sums_l(k,3,tn) + w(k,j,i) * rmask(j,i,sr) &
	517	* flag
	518	!$ACC ATOMIC
[2232]	519	sums_l(k,8,tn) = sums_l(k,8,tn) + e(k,j,i) * rmask(j,i,sr) &
	520	* flag
[3658]	521	!$ACC ATOMIC
[2232]	522	sums_l(k,9,tn) = sums_l(k,9,tn) + km(k,j,i) * rmask(j,i,sr) &
	523	* flag
[3658]	524	!$ACC ATOMIC
[2232]	525	sums_l(k,10,tn) = sums_l(k,10,tn) + kh(k,j,i) * rmask(j,i,sr) &
	526	* flag
[3658]	527	!$ACC ATOMIC
[2252]	528	sums_l(k,40,tn) = sums_l(k,40,tn) + ( p(k,j,i) &
	529	/ momentumflux_output_conversion(k) ) &
	530	* flag
[1]	531
[3658]	532	!$ACC ATOMIC
[1]	533	sums_l(k,33,tn) = sums_l(k,33,tn) + &
[2232]	534	( pt(k,j,i)-hom(k,1,4,sr) )*2 rmask(j,i,sr)&
	535	* flag
[3658]	536	#ifndef _OPENACC
[624]	537	IF ( humidity ) THEN
	538	sums_l(k,70,tn) = sums_l(k,70,tn) + &
[2232]	539	( q(k,j,i)-hom(k,1,41,sr) )*2 rmask(j,i,sr)&
	540	* flag
[624]	541	ENDIF
[1960]	542	IF ( passive_scalar ) THEN
[2270]	543	sums_l(k,116,tn) = sums_l(k,116,tn) + &
	544	( s(k,j,i)-hom(k,1,115,sr) )*2 rmask(j,i,sr)&
[2232]	545	* flag
[1960]	546	ENDIF
[3658]	547	#endif
[699]	548	!
	549	!-- Higher moments
	550	!-- (Computation of the skewness of w further below)
[3658]	551	!$ACC ATOMIC
[2232]	552	sums_l(k,38,tn) = sums_l(k,38,tn) + w(k,j,i)*3 rmask(j,i,sr) &
	553	* flag
[667]	554
[1]	555	sums_l_etot = sums_l_etot + &
[2232]	556	0.5_wp * ( u(k,j,i)2 + v(k,j,i)2 + &
	557	w(k,j,i)*2 ) rmask(j,i,sr)&
	558	* flag
[1]	559	ENDDO
	560	!
	561	!-- Total and perturbation energy for the total domain (being
	562	!-- collected in the last column of sums_l). Summation of these
	563	!-- quantities is seperated from the previous loop in order to
	564	!-- allow vectorization of that loop.
[3658]	565	!$ACC ATOMIC
[87]	566	sums_l(nzb+4,pr_palm,tn) = sums_l(nzb+4,pr_palm,tn) + sums_l_etot
[1]	567	!
	568	!-- 2D-arrays (being collected in the last column of sums_l)
[2773]	569	IF ( surf_def_h(0)%end_index(j,i) >= &
[2696]	570	surf_def_h(0)%start_index(j,i) ) THEN
[2232]	571	m = surf_def_h(0)%start_index(j,i)
[3658]	572	!$ACC ATOMIC
[2773]	573	sums_l(nzb,pr_palm,tn) = sums_l(nzb,pr_palm,tn) + &
[2232]	574	surf_def_h(0)%us(m) * rmask(j,i,sr)
[3658]	575	!$ACC ATOMIC
[2773]	576	sums_l(nzb+1,pr_palm,tn) = sums_l(nzb+1,pr_palm,tn) + &
[2232]	577	surf_def_h(0)%usws(m) * rmask(j,i,sr)
[3658]	578	!$ACC ATOMIC
[2773]	579	sums_l(nzb+2,pr_palm,tn) = sums_l(nzb+2,pr_palm,tn) + &
[2232]	580	surf_def_h(0)%vsws(m) * rmask(j,i,sr)
[3658]	581	!$ACC ATOMIC
[2773]	582	sums_l(nzb+3,pr_palm,tn) = sums_l(nzb+3,pr_palm,tn) + &
[2232]	583	surf_def_h(0)%ts(m) * rmask(j,i,sr)
[3658]	584	#ifndef _OPENACC
[2232]	585	IF ( humidity ) THEN
[2773]	586	sums_l(nzb+12,pr_palm,tn) = sums_l(nzb+12,pr_palm,tn) + &
[2232]	587	surf_def_h(0)%qs(m) * rmask(j,i,sr)
	588	ENDIF
	589	IF ( passive_scalar ) THEN
[2773]	590	sums_l(nzb+13,pr_palm,tn) = sums_l(nzb+13,pr_palm,tn) + &
[2232]	591	surf_def_h(0)%ss(m) * rmask(j,i,sr)
	592	ENDIF
[3658]	593	#endif
[2773]	594	!
	595	!-- Summation of surface temperature.
[3658]	596	!$ACC ATOMIC
[2773]	597	sums_l(nzb+14,pr_palm,tn) = sums_l(nzb+14,pr_palm,tn) + &
	598	surf_def_h(0)%pt_surface(m) * &
	599	rmask(j,i,sr)
[197]	600	ENDIF
[2696]	601	IF ( surf_lsm_h%end_index(j,i) >= surf_lsm_h%start_index(j,i) ) THEN
[2232]	602	m = surf_lsm_h%start_index(j,i)
[3658]	603	!$ACC ATOMIC
[2773]	604	sums_l(nzb,pr_palm,tn) = sums_l(nzb,pr_palm,tn) + &
[2232]	605	surf_lsm_h%us(m) * rmask(j,i,sr)
[3658]	606	!$ACC ATOMIC
[2773]	607	sums_l(nzb+1,pr_palm,tn) = sums_l(nzb+1,pr_palm,tn) + &
[2232]	608	surf_lsm_h%usws(m) * rmask(j,i,sr)
[3658]	609	!$ACC ATOMIC
[2773]	610	sums_l(nzb+2,pr_palm,tn) = sums_l(nzb+2,pr_palm,tn) + &
[2232]	611	surf_lsm_h%vsws(m) * rmask(j,i,sr)
[3658]	612	!$ACC ATOMIC
[2773]	613	sums_l(nzb+3,pr_palm,tn) = sums_l(nzb+3,pr_palm,tn) + &
[2232]	614	surf_lsm_h%ts(m) * rmask(j,i,sr)
[3658]	615	#ifndef _OPENACC
[2232]	616	IF ( humidity ) THEN
[2773]	617	sums_l(nzb+12,pr_palm,tn) = sums_l(nzb+12,pr_palm,tn) + &
[2232]	618	surf_lsm_h%qs(m) * rmask(j,i,sr)
	619	ENDIF
	620	IF ( passive_scalar ) THEN
[2773]	621	sums_l(nzb+13,pr_palm,tn) = sums_l(nzb+13,pr_palm,tn) + &
[2232]	622	surf_lsm_h%ss(m) * rmask(j,i,sr)
	623	ENDIF
[3658]	624	#endif
[2773]	625	!
	626	!-- Summation of surface temperature.
[3658]	627	!$ACC ATOMIC
[2773]	628	sums_l(nzb+14,pr_palm,tn) = sums_l(nzb+14,pr_palm,tn) + &
	629	surf_lsm_h%pt_surface(m) * &
	630	rmask(j,i,sr)
[1960]	631	ENDIF
[2696]	632	IF ( surf_usm_h%end_index(j,i) >= surf_usm_h%start_index(j,i) ) THEN
	633	m = surf_usm_h%start_index(j,i)
[3658]	634	!$ACC ATOMIC
[2773]	635	sums_l(nzb,pr_palm,tn) = sums_l(nzb,pr_palm,tn) + &
[2232]	636	surf_usm_h%us(m) * rmask(j,i,sr)
[3658]	637	!$ACC ATOMIC
[2773]	638	sums_l(nzb+1,pr_palm,tn) = sums_l(nzb+1,pr_palm,tn) + &
[2232]	639	surf_usm_h%usws(m) * rmask(j,i,sr)
[3658]	640	!$ACC ATOMIC
[2773]	641	sums_l(nzb+2,pr_palm,tn) = sums_l(nzb+2,pr_palm,tn) + &
[2232]	642	surf_usm_h%vsws(m) * rmask(j,i,sr)
[3658]	643	!$ACC ATOMIC
[2773]	644	sums_l(nzb+3,pr_palm,tn) = sums_l(nzb+3,pr_palm,tn) + &
[2232]	645	surf_usm_h%ts(m) * rmask(j,i,sr)
[3658]	646	#ifndef _OPENACC
[2232]	647	IF ( humidity ) THEN
[2773]	648	sums_l(nzb+12,pr_palm,tn) = sums_l(nzb+12,pr_palm,tn) + &
[2232]	649	surf_usm_h%qs(m) * rmask(j,i,sr)
	650	ENDIF
	651	IF ( passive_scalar ) THEN
[2773]	652	sums_l(nzb+13,pr_palm,tn) = sums_l(nzb+13,pr_palm,tn) + &
[2232]	653	surf_usm_h%ss(m) * rmask(j,i,sr)
	654	ENDIF
[3658]	655	#endif
[2773]	656	!
	657	!-- Summation of surface temperature.
[3658]	658	!$ACC ATOMIC
[2773]	659	sums_l(nzb+14,pr_palm,tn) = sums_l(nzb+14,pr_palm,tn) + &
	660	surf_usm_h%pt_surface(m) * &
	661	rmask(j,i,sr)
[2232]	662	ENDIF
[1]	663	ENDDO
	664	ENDDO
[3658]	665	!$ACC UPDATE &
	666	!$ACC HOST(sums_l(:,3,tn), sums_l(:,8,tn), sums_l(:,9,tn)) &
	667	!$ACC HOST(sums_l(:,10,tn), sums_l(:,40,tn), sums_l(:,33,tn)) &
	668	!$ACC HOST(sums_l(:,38,tn)) &
	669	!$ACC HOST(sums_l(nzb:nzb+4,pr_palm,tn), sums_l(nzb+14:nzb+14,pr_palm,tn))
[1]	670
	671	!
[667]	672	!-- Computation of statistics when ws-scheme is not used. Else these
	673	!-- quantities are evaluated in the advection routines.
[1918]	674	IF ( .NOT. ws_scheme_mom .OR. sr /= 0 .OR. simulated_time == 0.0_wp ) &
	675	THEN
[667]	676	!$OMP DO
	677	DO i = nxl, nxr
	678	DO j = nys, nyn
[2232]	679	DO k = nzb, nzt+1
[4346]	680	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 22 ) )
[2232]	681
[667]	682	u2 = u(k,j,i)**2
	683	v2 = v(k,j,i)**2
	684	w2 = w(k,j,i)**2
	685	ust2 = ( u(k,j,i) - hom(k,1,1,sr) )**2
	686	vst2 = ( v(k,j,i) - hom(k,1,2,sr) )**2
	687
[2232]	688	sums_l(k,30,tn) = sums_l(k,30,tn) + ust2 * rmask(j,i,sr) &
	689	* flag
	690	sums_l(k,31,tn) = sums_l(k,31,tn) + vst2 * rmask(j,i,sr) &
	691	* flag
	692	sums_l(k,32,tn) = sums_l(k,32,tn) + w2 * rmask(j,i,sr) &
	693	* flag
[667]	694	!
[2026]	695	!-- Perturbation energy
[667]	696
[1353]	697	sums_l(k,34,tn) = sums_l(k,34,tn) + 0.5_wp * &
[2232]	698	( ust2 + vst2 + w2 ) * rmask(j,i,sr) &
	699	* flag
[667]	700	ENDDO
	701	ENDDO
	702	ENDDO
	703	ENDIF
[2026]	704	!
	705	!-- Computaion of domain-averaged perturbation energy. Please note,
	706	!-- to prevent that perturbation energy is larger (even if only slightly)
	707	!-- than the total kinetic energy, calculation is based on deviations from
	708	!-- the horizontal mean, instead of spatial descretization of the advection
	709	!-- term.
	710	!$OMP DO
[3658]	711	!$ACC PARALLEL LOOP COLLAPSE(3) PRIVATE(i, j, k, flag, w2, ust2, vst2) &
[4346]	712	!$ACC PRESENT(wall_flags_total_0, u, v, w, rmask, hom(:,1,1:2,sr)) &
[3658]	713	!$ACC PRESENT(sums_l)
[2026]	714	DO i = nxl, nxr
	715	DO j = nys, nyn
[2232]	716	DO k = nzb, nzt+1
[4346]	717	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 22 ) )
[2232]	718
[2026]	719	w2 = w(k,j,i)**2
	720	ust2 = ( u(k,j,i) - hom(k,1,1,sr) )**2
	721	vst2 = ( v(k,j,i) - hom(k,1,2,sr) )**2
	722	w2 = w(k,j,i)**2
[1241]	723
[3658]	724	!$ACC ATOMIC
[2026]	725	sums_l(nzb+5,pr_palm,tn) = sums_l(nzb+5,pr_palm,tn) &
[2232]	726	+ 0.5_wp * ( ust2 + vst2 + w2 ) &
	727	* rmask(j,i,sr) &
	728	* flag
[2026]	729	ENDDO
	730	ENDDO
	731	ENDDO
[3658]	732	!$ACC UPDATE HOST(sums_l(nzb+5:nzb+5,pr_palm,tn))
[2026]	733
[667]	734	!
[1]	735	!-- Horizontally averaged profiles of the vertical fluxes
[667]	736
[1]	737	!$OMP DO
[3658]	738	!$ACC PARALLEL LOOP COLLAPSE(2) PRIVATE(i, j, k, l, m) &
	739	!$ACC PRIVATE(ki, flag, ust, vst, pts) &
	740	!$ACC PRESENT(kh, km, u, v, w, pt) &
[4346]	741	!$ACC PRESENT(wall_flags_total_0, rmask, ddzu, rho_air_zw, hom(:,1,1:4,sr)) &
[3658]	742	!$ACC PRESENT(heatflux_output_conversion, momentumflux_output_conversion) &
	743	!$ACC PRESENT(surf_def_h(0:2), surf_lsm_h, surf_usm_h) &
	744	!$ACC PRESENT(sums_l)
[1]	745	DO i = nxl, nxr
	746	DO j = nys, nyn
	747	!
	748	!-- Subgridscale fluxes (without Prandtl layer from k=nzb,
	749	!-- oterwise from k=nzb+1)
[132]	750	!-- NOTE: for simplicity, nzb_diff_s_inner is used below, although
[1]	751	!-- ---- strictly speaking the following k-loop would have to be
	752	!-- split up according to the staggered grid.
[132]	753	!-- However, this implies no error since staggered velocity
	754	!-- components are zero at the walls and inside buildings.
[2232]	755	!-- Flag 23 is used to mask surface fluxes as well as model-top fluxes,
	756	!-- which are added further below.
	757	DO k = nzb, nzt
	758	flag = MERGE( 1.0_wp, 0.0_wp, &
[4346]	759	BTEST( wall_flags_total_0(k,j,i), 23 ) ) * &
[2232]	760	MERGE( 1.0_wp, 0.0_wp, &
[4346]	761	BTEST( wall_flags_total_0(k,j,i), 9 ) )
[1]	762	!
	763	!-- Momentum flux w"u"
[3658]	764	!$ACC ATOMIC
[1353]	765	sums_l(k,12,tn) = sums_l(k,12,tn) - 0.25_wp * ( &
[1]	766	km(k,j,i)+km(k+1,j,i)+km(k,j,i-1)+km(k+1,j,i-1) &
	767	) * ( &
	768	( u(k+1,j,i) - u(k,j,i) ) * ddzu(k+1) &
	769	+ ( w(k,j,i) - w(k,j,i-1) ) * ddx &
[2037]	770	) * rmask(j,i,sr) &
	771	* rho_air_zw(k) &
[2232]	772	* momentumflux_output_conversion(k) &
	773	* flag
[1]	774	!
	775	!-- Momentum flux w"v"
[3658]	776	!$ACC ATOMIC
[1353]	777	sums_l(k,14,tn) = sums_l(k,14,tn) - 0.25_wp * ( &
[1]	778	km(k,j,i)+km(k+1,j,i)+km(k,j-1,i)+km(k+1,j-1,i) &
	779	) * ( &
	780	( v(k+1,j,i) - v(k,j,i) ) * ddzu(k+1) &
	781	+ ( w(k,j,i) - w(k,j-1,i) ) * ddy &
[2037]	782	) * rmask(j,i,sr) &
	783	* rho_air_zw(k) &
[2232]	784	* momentumflux_output_conversion(k) &
	785	* flag
[1]	786	!
	787	!-- Heat flux w"pt"
[3658]	788	!$ACC ATOMIC
[1]	789	sums_l(k,16,tn) = sums_l(k,16,tn) &
[1353]	790	- 0.5_wp * ( kh(k,j,i) + kh(k+1,j,i) )&
[1]	791	* ( pt(k+1,j,i) - pt(k,j,i) ) &
[2037]	792	* rho_air_zw(k) &
	793	* heatflux_output_conversion(k) &
[2232]	794	* ddzu(k+1) * rmask(j,i,sr) &
	795	* flag
[1]	796
	797	!
[96]	798	!-- Salinity flux w"sa"
[3658]	799	#ifndef _OPENACC
[3294]	800	IF ( ocean_mode ) THEN
[96]	801	sums_l(k,65,tn) = sums_l(k,65,tn) &
[1353]	802	- 0.5_wp * ( kh(k,j,i) + kh(k+1,j,i) )&
[96]	803	* ( sa(k+1,j,i) - sa(k,j,i) ) &
[2232]	804	* ddzu(k+1) * rmask(j,i,sr) &
	805	* flag
[96]	806	ENDIF
	807
	808	!
[1]	809	!-- Buoyancy flux, water flux (humidity flux) w"q"
[75]	810	IF ( humidity ) THEN
[1]	811	sums_l(k,45,tn) = sums_l(k,45,tn) &
[1353]	812	- 0.5_wp * ( kh(k,j,i) + kh(k+1,j,i) )&
[1]	813	* ( vpt(k+1,j,i) - vpt(k,j,i) ) &
[2037]	814	* rho_air_zw(k) &
	815	* heatflux_output_conversion(k) &
[2232]	816	* ddzu(k+1) * rmask(j,i,sr) * flag
[1]	817	sums_l(k,48,tn) = sums_l(k,48,tn) &
[1353]	818	- 0.5_wp * ( kh(k,j,i) + kh(k+1,j,i) )&
[1]	819	* ( q(k+1,j,i) - q(k,j,i) ) &
[2037]	820	* rho_air_zw(k) &
	821	* waterflux_output_conversion(k)&
[2232]	822	* ddzu(k+1) * rmask(j,i,sr) * flag
[1007]	823
[3274]	824	IF ( bulk_cloud_model ) THEN
[1]	825	sums_l(k,51,tn) = sums_l(k,51,tn) &
[1353]	826	- 0.5_wp * ( kh(k,j,i) + kh(k+1,j,i) )&
[1]	827	* ( ( q(k+1,j,i) - ql(k+1,j,i) )&
	828	- ( q(k,j,i) - ql(k,j,i) ) ) &
[2037]	829	* rho_air_zw(k) &
	830	* waterflux_output_conversion(k)&
[2232]	831	* ddzu(k+1) * rmask(j,i,sr) * flag
[1]	832	ENDIF
	833	ENDIF
	834
	835	!
	836	!-- Passive scalar flux
	837	IF ( passive_scalar ) THEN
[2270]	838	sums_l(k,117,tn) = sums_l(k,117,tn) &
[1353]	839	- 0.5_wp * ( kh(k,j,i) + kh(k+1,j,i) )&
[2026]	840	* ( s(k+1,j,i) - s(k,j,i) ) &
[2232]	841	* ddzu(k+1) * rmask(j,i,sr) &
	842	* flag
[1]	843	ENDIF
[3658]	844	#endif
[1]	845
	846	ENDDO
	847
	848	!
	849	!-- Subgridscale fluxes in the Prandtl layer
	850	IF ( use_surface_fluxes ) THEN
[2232]	851	DO l = 0, 1
[3658]	852	! The original code using MERGE doesn't work with the PGI
	853	! compiler when running on the GPU.
[3676]	854	! This is submitted as a compiler Bug in PGI ticket TPR#26718
[3658]	855	! ki = MERGE( -1, 0, l == 0 )
	856	ki = -1 + l
[2232]	857	IF ( surf_def_h(l)%ns >= 1 ) THEN
[2696]	858	DO m = surf_def_h(l)%start_index(j,i), &
	859	surf_def_h(l)%end_index(j,i)
[2232]	860	k = surf_def_h(l)%k(m)
	861
[3658]	862	!$ACC ATOMIC
[2232]	863	sums_l(k+ki,12,tn) = sums_l(k+ki,12,tn) + &
	864	momentumflux_output_conversion(k+ki) * &
	865	surf_def_h(l)%usws(m) * rmask(j,i,sr) ! w"u"
[3658]	866	!$ACC ATOMIC
[2232]	867	sums_l(k+ki,14,tn) = sums_l(k+ki,14,tn) + &
	868	momentumflux_output_conversion(k+ki) * &
	869	surf_def_h(l)%vsws(m) * rmask(j,i,sr) ! w"v"
[3658]	870	!$ACC ATOMIC
[2232]	871	sums_l(k+ki,16,tn) = sums_l(k+ki,16,tn) + &
	872	heatflux_output_conversion(k+ki) * &
	873	surf_def_h(l)%shf(m) * rmask(j,i,sr) ! w"pt"
[3658]	874	#if 0
[2232]	875	sums_l(k+ki,58,tn) = sums_l(k+ki,58,tn) + &
	876	0.0_wp * rmask(j,i,sr) ! u"pt"
	877	sums_l(k+ki,61,tn) = sums_l(k+ki,61,tn) + &
	878	0.0_wp * rmask(j,i,sr) ! v"pt"
[3658]	879	#endif
	880	#ifndef _OPENACC
[3294]	881	IF ( ocean_mode ) THEN
[2232]	882	sums_l(k+ki,65,tn) = sums_l(k+ki,65,tn) + &
	883	surf_def_h(l)%sasws(m) * rmask(j,i,sr) ! w"sa"
	884	ENDIF
	885	IF ( humidity ) THEN
	886	sums_l(k+ki,48,tn) = sums_l(k+ki,48,tn) + &
	887	waterflux_output_conversion(k+ki) * &
	888	surf_def_h(l)%qsws(m) * rmask(j,i,sr) ! w"q" (w"qv")
	889	sums_l(k+ki,45,tn) = sums_l(k+ki,45,tn) + ( &
	890	( 1.0_wp + 0.61_wp * q(k+ki,j,i) ) * &
	891	surf_def_h(l)%shf(m) + 0.61_wp * pt(k+ki,j,i) * &
	892	surf_def_h(l)%qsws(m) ) &
	893	* heatflux_output_conversion(k+ki)
	894	IF ( cloud_droplets ) THEN
	895	sums_l(k+ki,45,tn) = sums_l(k+ki,45,tn) + ( &
	896	( 1.0_wp + 0.61_wp * q(k+ki,j,i) - &
	897	ql(k+ki,j,i) ) * surf_def_h(l)%shf(m) + &
	898	0.61_wp * pt(k+ki,j,i) * surf_def_h(l)%qsws(m) ) &
	899	* heatflux_output_conversion(k+ki)
	900	ENDIF
[3274]	901	IF ( bulk_cloud_model ) THEN
[2232]	902	!
	903	!-- Formula does not work if ql(k+ki) /= 0.0
	904	sums_l(k+ki,51,tn) = sums_l(k+ki,51,tn) + &
	905	waterflux_output_conversion(k+ki) * &
	906	surf_def_h(l)%qsws(m) * rmask(j,i,sr) ! w"q" (w"qv")
	907	ENDIF
	908	ENDIF
	909	IF ( passive_scalar ) THEN
[2270]	910	sums_l(k+ki,117,tn) = sums_l(k+ki,117,tn) + &
[2232]	911	surf_def_h(l)%ssws(m) * rmask(j,i,sr) ! w"s"
	912	ENDIF
[3658]	913	#endif
[2232]	914
	915	ENDDO
	916
	917	ENDIF
	918	ENDDO
[2696]	919	IF ( surf_lsm_h%end_index(j,i) >= &
	920	surf_lsm_h%start_index(j,i) ) THEN
[2232]	921	m = surf_lsm_h%start_index(j,i)
[3658]	922	!$ACC ATOMIC
[2232]	923	sums_l(nzb,12,tn) = sums_l(nzb,12,tn) + &
[2037]	924	momentumflux_output_conversion(nzb) * &
[2232]	925	surf_lsm_h%usws(m) * rmask(j,i,sr) ! w"u"
[3658]	926	!$ACC ATOMIC
[2232]	927	sums_l(nzb,14,tn) = sums_l(nzb,14,tn) + &
[2037]	928	momentumflux_output_conversion(nzb) * &
[2232]	929	surf_lsm_h%vsws(m) * rmask(j,i,sr) ! w"v"
[3658]	930	!$ACC ATOMIC
[2232]	931	sums_l(nzb,16,tn) = sums_l(nzb,16,tn) + &
[2037]	932	heatflux_output_conversion(nzb) * &
[2232]	933	surf_lsm_h%shf(m) * rmask(j,i,sr) ! w"pt"
[3658]	934	#if 0
[2232]	935	sums_l(nzb,58,tn) = sums_l(nzb,58,tn) + &
[1353]	936	0.0_wp * rmask(j,i,sr) ! u"pt"
[2232]	937	sums_l(nzb,61,tn) = sums_l(nzb,61,tn) + &
[1353]	938	0.0_wp * rmask(j,i,sr) ! v"pt"
[3658]	939	#endif
	940	#ifndef _OPENACC
[3294]	941	IF ( ocean_mode ) THEN
[2232]	942	sums_l(nzb,65,tn) = sums_l(nzb,65,tn) + &
	943	surf_lsm_h%sasws(m) * rmask(j,i,sr) ! w"sa"
	944	ENDIF
	945	IF ( humidity ) THEN
	946	sums_l(nzb,48,tn) = sums_l(nzb,48,tn) + &
	947	waterflux_output_conversion(nzb) * &
	948	surf_lsm_h%qsws(m) * rmask(j,i,sr) ! w"q" (w"qv")
	949	sums_l(nzb,45,tn) = sums_l(nzb,45,tn) + ( &
	950	( 1.0_wp + 0.61_wp * q(nzb,j,i) ) * &
	951	surf_lsm_h%shf(m) + 0.61_wp * pt(nzb,j,i) * &
	952	surf_lsm_h%qsws(m) ) &
	953	* heatflux_output_conversion(nzb)
	954	IF ( cloud_droplets ) THEN
	955	sums_l(nzb,45,tn) = sums_l(nzb,45,tn) + ( &
	956	( 1.0_wp + 0.61_wp * q(nzb,j,i) - &
	957	ql(nzb,j,i) ) * surf_lsm_h%shf(m) + &
	958	0.61_wp * pt(nzb,j,i) * surf_lsm_h%qsws(m) ) &
	959	* heatflux_output_conversion(nzb)
	960	ENDIF
[3274]	961	IF ( bulk_cloud_model ) THEN
[2232]	962	!
	963	!-- Formula does not work if ql(nzb) /= 0.0
	964	sums_l(nzb,51,tn) = sums_l(nzb,51,tn) + &
	965	waterflux_output_conversion(nzb) * &
	966	surf_lsm_h%qsws(m) * rmask(j,i,sr) ! w"q" (w"qv")
	967	ENDIF
	968	ENDIF
	969	IF ( passive_scalar ) THEN
[2270]	970	sums_l(nzb,117,tn) = sums_l(nzb,117,tn) + &
[2232]	971	surf_lsm_h%ssws(m) * rmask(j,i,sr) ! w"s"
	972	ENDIF
[3658]	973	#endif
[2232]	974
[96]	975	ENDIF
[2696]	976	IF ( surf_usm_h%end_index(j,i) >= &
	977	surf_usm_h%start_index(j,i) ) THEN
[2232]	978	m = surf_usm_h%start_index(j,i)
[3658]	979	!$ACC ATOMIC
[2232]	980	sums_l(nzb,12,tn) = sums_l(nzb,12,tn) + &
	981	momentumflux_output_conversion(nzb) * &
	982	surf_usm_h%usws(m) * rmask(j,i,sr) ! w"u"
[3658]	983	!$ACC ATOMIC
[2232]	984	sums_l(nzb,14,tn) = sums_l(nzb,14,tn) + &
	985	momentumflux_output_conversion(nzb) * &
	986	surf_usm_h%vsws(m) * rmask(j,i,sr) ! w"v"
[3658]	987	!$ACC ATOMIC
[2232]	988	sums_l(nzb,16,tn) = sums_l(nzb,16,tn) + &
	989	heatflux_output_conversion(nzb) * &
	990	surf_usm_h%shf(m) * rmask(j,i,sr) ! w"pt"
[3658]	991	#if 0
[2232]	992	sums_l(nzb,58,tn) = sums_l(nzb,58,tn) + &
	993	0.0_wp * rmask(j,i,sr) ! u"pt"
	994	sums_l(nzb,61,tn) = sums_l(nzb,61,tn) + &
	995	0.0_wp * rmask(j,i,sr) ! v"pt"
[3658]	996	#endif
	997	#ifndef _OPENACC
[3294]	998	IF ( ocean_mode ) THEN
[2232]	999	sums_l(nzb,65,tn) = sums_l(nzb,65,tn) + &
	1000	surf_usm_h%sasws(m) * rmask(j,i,sr) ! w"sa"
	1001	ENDIF
	1002	IF ( humidity ) THEN
	1003	sums_l(nzb,48,tn) = sums_l(nzb,48,tn) + &
[2037]	1004	waterflux_output_conversion(nzb) * &
[2232]	1005	surf_usm_h%qsws(m) * rmask(j,i,sr) ! w"q" (w"qv")
	1006	sums_l(nzb,45,tn) = sums_l(nzb,45,tn) + ( &
[1353]	1007	( 1.0_wp + 0.61_wp * q(nzb,j,i) ) * &
[2232]	1008	surf_usm_h%shf(m) + 0.61_wp * pt(nzb,j,i) * &
	1009	surf_usm_h%qsws(m) ) &
[2037]	1010	* heatflux_output_conversion(nzb)
[2232]	1011	IF ( cloud_droplets ) THEN
	1012	sums_l(nzb,45,tn) = sums_l(nzb,45,tn) + ( &
[1353]	1013	( 1.0_wp + 0.61_wp * q(nzb,j,i) - &
[2232]	1014	ql(nzb,j,i) ) * surf_usm_h%shf(m) + &
	1015	0.61_wp * pt(nzb,j,i) * surf_usm_h%qsws(m) ) &
[2037]	1016	* heatflux_output_conversion(nzb)
[2232]	1017	ENDIF
[3274]	1018	IF ( bulk_cloud_model ) THEN
[1]	1019	!
[2232]	1020	!-- Formula does not work if ql(nzb) /= 0.0
	1021	sums_l(nzb,51,tn) = sums_l(nzb,51,tn) + &
[2037]	1022	waterflux_output_conversion(nzb) * &
[2232]	1023	surf_usm_h%qsws(m) * rmask(j,i,sr) ! w"q" (w"qv")
	1024	ENDIF
[1]	1025	ENDIF
[2232]	1026	IF ( passive_scalar ) THEN
[2270]	1027	sums_l(nzb,117,tn) = sums_l(nzb,117,tn) + &
[2232]	1028	surf_usm_h%ssws(m) * rmask(j,i,sr) ! w"s"
	1029	ENDIF
[3658]	1030	#endif
[2232]	1031
[1]	1032	ENDIF
[2232]	1033
[1]	1034	ENDIF
	1035
[3658]	1036	#ifndef _OPENACC
[1691]	1037	IF ( .NOT. neutral ) THEN
[2696]	1038	IF ( surf_def_h(0)%end_index(j,i) >= &
	1039	surf_def_h(0)%start_index(j,i) ) THEN
[2232]	1040	m = surf_def_h(0)%start_index(j,i)
[2696]	1041	sums_l(nzb,112,tn) = sums_l(nzb,112,tn) + &
[2232]	1042	surf_def_h(0)%ol(m) * rmask(j,i,sr) ! L
	1043	ENDIF
[2696]	1044	IF ( surf_lsm_h%end_index(j,i) >= &
	1045	surf_lsm_h%start_index(j,i) ) THEN
[2232]	1046	m = surf_lsm_h%start_index(j,i)
[2696]	1047	sums_l(nzb,112,tn) = sums_l(nzb,112,tn) + &
[2232]	1048	surf_lsm_h%ol(m) * rmask(j,i,sr) ! L
	1049	ENDIF
[2696]	1050	IF ( surf_usm_h%end_index(j,i) >= &
	1051	surf_usm_h%start_index(j,i) ) THEN
[2232]	1052	m = surf_usm_h%start_index(j,i)
[2696]	1053	sums_l(nzb,112,tn) = sums_l(nzb,112,tn) + &
[2232]	1054	surf_usm_h%ol(m) * rmask(j,i,sr) ! L
	1055	ENDIF
[1691]	1056	ENDIF
	1057
[2296]	1058	IF ( radiation ) THEN
[2696]	1059	IF ( surf_def_h(0)%end_index(j,i) >= &
	1060	surf_def_h(0)%start_index(j,i) ) THEN
	1061	m = surf_def_h(0)%start_index(j,i)
	1062	sums_l(nzb,99,tn) = sums_l(nzb,99,tn) + &
	1063	surf_def_h(0)%rad_net(m) * rmask(j,i,sr)
	1064	sums_l(nzb,100,tn) = sums_l(nzb,100,tn) + &
	1065	surf_def_h(0)%rad_lw_in(m) * rmask(j,i,sr)
	1066	sums_l(nzb,101,tn) = sums_l(nzb,101,tn) + &
	1067	surf_def_h(0)%rad_lw_out(m) * rmask(j,i,sr)
	1068	sums_l(nzb,102,tn) = sums_l(nzb,102,tn) + &
	1069	surf_def_h(0)%rad_sw_in(m) * rmask(j,i,sr)
	1070	sums_l(nzb,103,tn) = sums_l(nzb,103,tn) + &
	1071	surf_def_h(0)%rad_sw_out(m) * rmask(j,i,sr)
	1072	ENDIF
	1073	IF ( surf_lsm_h%end_index(j,i) >= &
	1074	surf_lsm_h%start_index(j,i) ) THEN
	1075	m = surf_lsm_h%start_index(j,i)
	1076	sums_l(nzb,99,tn) = sums_l(nzb,99,tn) + &
	1077	surf_lsm_h%rad_net(m) * rmask(j,i,sr)
	1078	sums_l(nzb,100,tn) = sums_l(nzb,100,tn) + &
	1079	surf_lsm_h%rad_lw_in(m) * rmask(j,i,sr)
	1080	sums_l(nzb,101,tn) = sums_l(nzb,101,tn) + &
	1081	surf_lsm_h%rad_lw_out(m) * rmask(j,i,sr)
	1082	sums_l(nzb,102,tn) = sums_l(nzb,102,tn) + &
	1083	surf_lsm_h%rad_sw_in(m) * rmask(j,i,sr)
	1084	sums_l(nzb,103,tn) = sums_l(nzb,103,tn) + &
	1085	surf_lsm_h%rad_sw_out(m) * rmask(j,i,sr)
	1086	ENDIF
	1087	IF ( surf_usm_h%end_index(j,i) >= &
	1088	surf_usm_h%start_index(j,i) ) THEN
	1089	m = surf_usm_h%start_index(j,i)
	1090	sums_l(nzb,99,tn) = sums_l(nzb,99,tn) + &
	1091	surf_usm_h%rad_net(m) * rmask(j,i,sr)
	1092	sums_l(nzb,100,tn) = sums_l(nzb,100,tn) + &
	1093	surf_usm_h%rad_lw_in(m) * rmask(j,i,sr)
	1094	sums_l(nzb,101,tn) = sums_l(nzb,101,tn) + &
	1095	surf_usm_h%rad_lw_out(m) * rmask(j,i,sr)
	1096	sums_l(nzb,102,tn) = sums_l(nzb,102,tn) + &
	1097	surf_usm_h%rad_sw_in(m) * rmask(j,i,sr)
	1098	sums_l(nzb,103,tn) = sums_l(nzb,103,tn) + &
	1099	surf_usm_h%rad_sw_out(m) * rmask(j,i,sr)
	1100	ENDIF
[1585]	1101
	1102	#if defined ( __rrtmg )
	1103	IF ( radiation_scheme == 'rrtmg' ) THEN
[2696]	1104
	1105	IF ( surf_def_h(0)%end_index(j,i) >= &
	1106	surf_def_h(0)%start_index(j,i) ) THEN
	1107	m = surf_def_h(0)%start_index(j,i)
	1108	sums_l(nzb,108,tn) = sums_l(nzb,108,tn) + &
[4441]	1109	surf_def_h(0)%rrtm_aldif(m,0) * rmask(j,i,sr)
[2696]	1110	sums_l(nzb,109,tn) = sums_l(nzb,109,tn) + &
[4441]	1111	surf_def_h(0)%rrtm_aldir(m,0) * rmask(j,i,sr)
[2696]	1112	sums_l(nzb,110,tn) = sums_l(nzb,110,tn) + &
[4441]	1113	surf_def_h(0)%rrtm_asdif(m,0) * rmask(j,i,sr)
[2696]	1114	sums_l(nzb,111,tn) = sums_l(nzb,111,tn) + &
[4441]	1115	surf_def_h(0)%rrtm_asdir(m,0) * rmask(j,i,sr)
[2696]	1116	ENDIF
	1117	IF ( surf_lsm_h%end_index(j,i) >= &
	1118	surf_lsm_h%start_index(j,i) ) THEN
	1119	m = surf_lsm_h%start_index(j,i)
	1120	sums_l(nzb,108,tn) = sums_l(nzb,108,tn) + &
[4441]	1121	SUM( surf_lsm_h%frac(m,:) * &
	1122	surf_lsm_h%rrtm_aldif(m,:) ) * rmask(j,i,sr)
[2696]	1123	sums_l(nzb,109,tn) = sums_l(nzb,109,tn) + &
[4441]	1124	SUM( surf_lsm_h%frac(m,:) * &
	1125	surf_lsm_h%rrtm_aldir(m,:) ) * rmask(j,i,sr)
[2696]	1126	sums_l(nzb,110,tn) = sums_l(nzb,110,tn) + &
[4441]	1127	SUM( surf_lsm_h%frac(m,:) * &
	1128	surf_lsm_h%rrtm_asdif(m,:) ) * rmask(j,i,sr)
[2696]	1129	sums_l(nzb,111,tn) = sums_l(nzb,111,tn) + &
[4441]	1130	SUM( surf_lsm_h%frac(m,:) * &
	1131	surf_lsm_h%rrtm_asdir(m,:) ) * rmask(j,i,sr)
[2696]	1132	ENDIF
	1133	IF ( surf_usm_h%end_index(j,i) >= &
	1134	surf_usm_h%start_index(j,i) ) THEN
	1135	m = surf_usm_h%start_index(j,i)
	1136	sums_l(nzb,108,tn) = sums_l(nzb,108,tn) + &
[4441]	1137	SUM( surf_usm_h%frac(m,:) * &
	1138	surf_usm_h%rrtm_aldif(m,:) ) * rmask(j,i,sr)
[2696]	1139	sums_l(nzb,109,tn) = sums_l(nzb,109,tn) + &
[4441]	1140	SUM( surf_usm_h%frac(m,:) * &
	1141	surf_usm_h%rrtm_aldir(m,:) ) * rmask(j,i,sr)
[2696]	1142	sums_l(nzb,110,tn) = sums_l(nzb,110,tn) + &
[4441]	1143	SUM( surf_usm_h%frac(m,:) * &
	1144	surf_usm_h%rrtm_asdif(m,:) ) * rmask(j,i,sr)
[2696]	1145	sums_l(nzb,111,tn) = sums_l(nzb,111,tn) + &
[4441]	1146	SUM( surf_usm_h%frac(m,:) * &
	1147	surf_usm_h%rrtm_asdir(m,:) ) * rmask(j,i,sr)
[2696]	1148	ENDIF
	1149
[1585]	1150	ENDIF
	1151	#endif
[1551]	1152	ENDIF
[3658]	1153	#endif
[1]	1154	!
[19]	1155	!-- Subgridscale fluxes at the top surface
	1156	IF ( use_top_fluxes ) THEN
[2232]	1157	m = surf_def_h(2)%start_index(j,i)
[3658]	1158	!$ACC ATOMIC
	1159	sums_l(nzt,12,tn) = sums_l(nzt,12,tn) + &
	1160	momentumflux_output_conversion(nzt) * &
[2232]	1161	surf_def_h(2)%usws(m) * rmask(j,i,sr) ! w"u"
[3658]	1162	!$ACC ATOMIC
	1163	sums_l(nzt+1,12,tn) = sums_l(nzt+1,12,tn) + &
	1164	momentumflux_output_conversion(nzt+1) * &
	1165	surf_def_h(2)%usws(m) * rmask(j,i,sr) ! w"u"
	1166	!$ACC ATOMIC
	1167	sums_l(nzt,14,tn) = sums_l(nzt,14,tn) + &
	1168	momentumflux_output_conversion(nzt) * &
[2232]	1169	surf_def_h(2)%vsws(m) * rmask(j,i,sr) ! w"v"
[3658]	1170	!$ACC ATOMIC
	1171	sums_l(nzt+1,14,tn) = sums_l(nzt+1,14,tn) + &
	1172	momentumflux_output_conversion(nzt+1) * &
	1173	surf_def_h(2)%vsws(m) * rmask(j,i,sr) ! w"v"
	1174	!$ACC ATOMIC
	1175	sums_l(nzt,16,tn) = sums_l(nzt,16,tn) + &
	1176	heatflux_output_conversion(nzt) * &
[2232]	1177	surf_def_h(2)%shf(m) * rmask(j,i,sr) ! w"pt"
[3658]	1178	!$ACC ATOMIC
	1179	sums_l(nzt+1,16,tn) = sums_l(nzt+1,16,tn) + &
	1180	heatflux_output_conversion(nzt+1) * &
	1181	surf_def_h(2)%shf(m) * rmask(j,i,sr) ! w"pt"
	1182	#if 0
[550]	1183	sums_l(nzt:nzt+1,58,tn) = sums_l(nzt:nzt+1,58,tn) + &
[1353]	1184	0.0_wp * rmask(j,i,sr) ! u"pt"
[550]	1185	sums_l(nzt:nzt+1,61,tn) = sums_l(nzt:nzt+1,61,tn) + &
[1353]	1186	0.0_wp * rmask(j,i,sr) ! v"pt"
[3658]	1187	#endif
	1188	#ifndef _OPENACC
[3294]	1189	IF ( ocean_mode ) THEN
[96]	1190	sums_l(nzt,65,tn) = sums_l(nzt,65,tn) + &
[2232]	1191	surf_def_h(2)%sasws(m) * rmask(j,i,sr) ! w"sa"
[96]	1192	ENDIF
[75]	1193	IF ( humidity ) THEN
[1353]	1194	sums_l(nzt,48,tn) = sums_l(nzt,48,tn) + &
[2037]	1195	waterflux_output_conversion(nzt) * &
[2232]	1196	surf_def_h(2)%qsws(m) * rmask(j,i,sr) ! w"q" (w"qv")
[1353]	1197	sums_l(nzt,45,tn) = sums_l(nzt,45,tn) + ( &
	1198	( 1.0_wp + 0.61_wp * q(nzt,j,i) ) * &
[2232]	1199	surf_def_h(2)%shf(m) + &
	1200	0.61_wp * pt(nzt,j,i) * &
	1201	surf_def_h(2)%qsws(m) ) &
[2037]	1202	* heatflux_output_conversion(nzt)
[1007]	1203	IF ( cloud_droplets ) THEN
[1353]	1204	sums_l(nzt,45,tn) = sums_l(nzt,45,tn) + ( &
	1205	( 1.0_wp + 0.61_wp * q(nzt,j,i) - &
[2232]	1206	ql(nzt,j,i) ) * &
	1207	surf_def_h(2)%shf(m) + &
	1208	0.61_wp * pt(nzt,j,i) * &
	1209	surf_def_h(2)%qsws(m) )&
[2037]	1210	* heatflux_output_conversion(nzt)
[1007]	1211	ENDIF
[3274]	1212	IF ( bulk_cloud_model ) THEN
[19]	1213	!
	1214	!-- Formula does not work if ql(nzb) /= 0.0
	1215	sums_l(nzt,51,tn) = sums_l(nzt,51,tn) + & ! w"q" (w"qv")
[2037]	1216	waterflux_output_conversion(nzt) * &
[2232]	1217	surf_def_h(2)%qsws(m) * rmask(j,i,sr)
[19]	1218	ENDIF
	1219	ENDIF
	1220	IF ( passive_scalar ) THEN
[2270]	1221	sums_l(nzt,117,tn) = sums_l(nzt,117,tn) + &
[2232]	1222	surf_def_h(2)%ssws(m) * rmask(j,i,sr) ! w"s"
[19]	1223	ENDIF
[3658]	1224	#endif
[19]	1225	ENDIF
	1226
	1227	!
[1]	1228	!-- Resolved fluxes (can be computed for all horizontal points)
[132]	1229	!-- NOTE: for simplicity, nzb_s_inner is used below, although strictly
[1]	1230	!-- ---- speaking the following k-loop would have to be split up and
	1231	!-- rearranged according to the staggered grid.
[2232]	1232	DO k = nzb, nzt
[4346]	1233	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 22 ) )
[1353]	1234	ust = 0.5_wp * ( u(k,j,i) - hom(k,1,1,sr) + &
	1235	u(k+1,j,i) - hom(k+1,1,1,sr) )
	1236	vst = 0.5_wp * ( v(k,j,i) - hom(k,1,2,sr) + &
	1237	v(k+1,j,i) - hom(k+1,1,2,sr) )
	1238	pts = 0.5_wp * ( pt(k,j,i) - hom(k,1,4,sr) + &
	1239	pt(k+1,j,i) - hom(k+1,1,4,sr) )
[667]	1240
[1]	1241	!-- Higher moments
[3658]	1242	!$ACC ATOMIC
[1353]	1243	sums_l(k,35,tn) = sums_l(k,35,tn) + pts * w(k,j,i)*2 &
[2232]	1244	rmask(j,i,sr) * flag
[3658]	1245	!$ACC ATOMIC
[1353]	1246	sums_l(k,36,tn) = sums_l(k,36,tn) + pts*2 w(k,j,i) * &
[2232]	1247	rmask(j,i,sr) * flag
[1]	1248
	1249	!
[96]	1250	!-- Salinity flux and density (density does not belong to here,
[97]	1251	!-- but so far there is no other suitable place to calculate)
[3658]	1252	#ifndef _OPENACC
[3294]	1253	IF ( ocean_mode ) THEN
[1567]	1254	IF( .NOT. ws_scheme_sca .OR. sr /= 0 ) THEN
[1353]	1255	pts = 0.5_wp * ( sa(k,j,i) - hom(k,1,23,sr) + &
	1256	sa(k+1,j,i) - hom(k+1,1,23,sr) )
	1257	sums_l(k,66,tn) = sums_l(k,66,tn) + pts * w(k,j,i) * &
[2232]	1258	rmask(j,i,sr) * flag
[667]	1259	ENDIF
[2232]	1260	sums_l(k,64,tn) = sums_l(k,64,tn) + rho_ocean(k,j,i) * &
	1261	rmask(j,i,sr) * flag
[1353]	1262	sums_l(k,71,tn) = sums_l(k,71,tn) + prho(k,j,i) * &
[2232]	1263	rmask(j,i,sr) * flag
[96]	1264	ENDIF
	1265
	1266	!
[1053]	1267	!-- Buoyancy flux, water flux, humidity flux, liquid water
	1268	!-- content, rain drop concentration and rain water content
[75]	1269	IF ( humidity ) THEN
[3274]	1270	IF ( bulk_cloud_model .OR. cloud_droplets ) THEN
[1353]	1271	pts = 0.5_wp * ( vpt(k,j,i) - hom(k,1,44,sr) + &
[1007]	1272	vpt(k+1,j,i) - hom(k+1,1,44,sr) )
[1353]	1273	sums_l(k,46,tn) = sums_l(k,46,tn) + pts * w(k,j,i) * &
[4039]	1274	rho_air_zw(k) * &
[2037]	1275	heatflux_output_conversion(k) * &
[2232]	1276	rmask(j,i,sr) * flag
	1277	sums_l(k,54,tn) = sums_l(k,54,tn) + ql(k,j,i) * rmask(j,i,sr) &
	1278	* flag
[1822]	1279
[1053]	1280	IF ( .NOT. cloud_droplets ) THEN
[1353]	1281	pts = 0.5_wp * &
[1115]	1282	( ( q(k,j,i) - ql(k,j,i) ) - &
	1283	hom(k,1,42,sr) + &
	1284	( q(k+1,j,i) - ql(k+1,j,i) ) - &
[1053]	1285	hom(k+1,1,42,sr) )
[1115]	1286	sums_l(k,52,tn) = sums_l(k,52,tn) + pts * w(k,j,i) * &
[4039]	1287	rho_air_zw(k) * &
[2037]	1288	waterflux_output_conversion(k) * &
[2232]	1289	rmask(j,i,sr) * &
	1290	flag
[1822]	1291	sums_l(k,75,tn) = sums_l(k,75,tn) + qc(k,j,i) * &
[2232]	1292	rmask(j,i,sr) * &
	1293	flag
[1822]	1294	sums_l(k,76,tn) = sums_l(k,76,tn) + prr(k,j,i) * &
[2232]	1295	rmask(j,i,sr) * &
	1296	flag
[2292]	1297	IF ( microphysics_morrison ) THEN
	1298	sums_l(k,123,tn) = sums_l(k,123,tn) + nc(k,j,i) * &
	1299	rmask(j,i,sr) *&
	1300	flag
	1301	ENDIF
[1822]	1302	IF ( microphysics_seifert ) THEN
	1303	sums_l(k,73,tn) = sums_l(k,73,tn) + nr(k,j,i) * &
[2232]	1304	rmask(j,i,sr) *&
	1305	flag
[1822]	1306	sums_l(k,74,tn) = sums_l(k,74,tn) + qr(k,j,i) * &
[2232]	1307	rmask(j,i,sr) *&
	1308	flag
[1053]	1309	ENDIF
	1310	ENDIF
[1822]	1311
[1007]	1312	ELSE
[1567]	1313	IF( .NOT. ws_scheme_sca .OR. sr /= 0 ) THEN
[1353]	1314	pts = 0.5_wp * ( vpt(k,j,i) - hom(k,1,44,sr) + &
	1315	vpt(k+1,j,i) - hom(k+1,1,44,sr) )
	1316	sums_l(k,46,tn) = sums_l(k,46,tn) + pts * w(k,j,i) * &
[4039]	1317	rho_air_zw(k) * &
[2037]	1318	heatflux_output_conversion(k) * &
[2232]	1319	rmask(j,i,sr) * &
	1320	flag
[1567]	1321	ELSE IF ( ws_scheme_sca .AND. sr == 0 ) THEN
[2037]	1322	sums_l(k,46,tn) = ( ( 1.0_wp + 0.61_wp * &
	1323	hom(k,1,41,sr) ) * &
	1324	sums_l(k,17,tn) + &
	1325	0.61_wp * hom(k,1,4,sr) * &
	1326	sums_l(k,49,tn) &
[2232]	1327	) * heatflux_output_conversion(k) * &
	1328	flag
[1007]	1329	END IF
	1330	END IF
[1]	1331	ENDIF
	1332	!
	1333	!-- Passive scalar flux
[1353]	1334	IF ( passive_scalar .AND. ( .NOT. ws_scheme_sca &
[1567]	1335	.OR. sr /= 0 ) ) THEN
[2270]	1336	pts = 0.5_wp * ( s(k,j,i) - hom(k,1,115,sr) + &
	1337	s(k+1,j,i) - hom(k+1,1,115,sr) )
	1338	sums_l(k,114,tn) = sums_l(k,114,tn) + pts * w(k,j,i) * &
[2232]	1339	rmask(j,i,sr) * flag
[1]	1340	ENDIF
[3658]	1341	#endif
[1]	1342
	1343	!
	1344	!-- Energy flux we
[667]	1345	!-- has to be adjusted
[3658]	1346	!$ACC ATOMIC
[1353]	1347	sums_l(k,37,tn) = sums_l(k,37,tn) + w(k,j,i) * 0.5_wp * &
	1348	( ust2 + vst2 + w(k,j,i)**2 ) &
[2674]	1349	* rho_air_zw(k) &
[2037]	1350	* momentumflux_output_conversion(k) &
[2232]	1351	* rmask(j,i,sr) * flag
[1]	1352	ENDDO
	1353	ENDDO
	1354	ENDDO
[2232]	1355	!$OMP END PARALLEL
[3658]	1356
	1357	!$ACC UPDATE &
	1358	!$ACC HOST(sums_l(:,12,tn), sums_l(:,14,tn), sums_l(:,16,tn)) &
	1359	!$ACC HOST(sums_l(:,35,tn), sums_l(:,36,tn), sums_l(:,37,tn))
[709]	1360	!
[2232]	1361	!-- Treat land-surface quantities according to new wall model structure.
	1362	IF ( land_surface ) THEN
	1363	tn = 0
	1364	!$OMP PARALLEL PRIVATE( i, j, m, tn )
	1365	!$ tn = omp_get_thread_num()
	1366	!$OMP DO
	1367	DO m = 1, surf_lsm_h%ns
	1368	i = surf_lsm_h%i(m)
	1369	j = surf_lsm_h%j(m)
	1370
	1371	IF ( i >= nxl .AND. i <= nxr .AND. &
	1372	j >= nys .AND. j <= nyn ) THEN
[2270]	1373	sums_l(nzb,93,tn) = sums_l(nzb,93,tn) + surf_lsm_h%ghf(m)
	1374	sums_l(nzb,94,tn) = sums_l(nzb,94,tn) + surf_lsm_h%qsws_liq(m)
	1375	sums_l(nzb,95,tn) = sums_l(nzb,95,tn) + surf_lsm_h%qsws_soil(m)
	1376	sums_l(nzb,96,tn) = sums_l(nzb,96,tn) + surf_lsm_h%qsws_veg(m)
	1377	sums_l(nzb,97,tn) = sums_l(nzb,97,tn) + surf_lsm_h%r_a(m)
	1378	sums_l(nzb,98,tn) = sums_l(nzb,98,tn)+ surf_lsm_h%r_s(m)
[2232]	1379	ENDIF
	1380	ENDDO
	1381	!$OMP END PARALLEL
	1382
	1383	tn = 0
	1384	!$OMP PARALLEL PRIVATE( i, j, k, m, tn )
	1385	!$ tn = omp_get_thread_num()
	1386	!$OMP DO
	1387	DO m = 1, surf_lsm_h%ns
	1388
	1389	i = surf_lsm_h%i(m)
	1390	j = surf_lsm_h%j(m)
	1391
	1392	IF ( i >= nxl .AND. i <= nxr .AND. &
	1393	j >= nys .AND. j <= nyn ) THEN
	1394
	1395	DO k = nzb_soil, nzt_soil
	1396	sums_l(k,89,tn) = sums_l(k,89,tn) + t_soil_h%var_2d(k,m) &
	1397	* rmask(j,i,sr)
	1398	sums_l(k,91,tn) = sums_l(k,91,tn) + m_soil_h%var_2d(k,m) &
	1399	* rmask(j,i,sr)
	1400	ENDDO
	1401	ENDIF
	1402	ENDDO
	1403	!$OMP END PARALLEL
	1404	ENDIF
	1405	!
[709]	1406	!-- For speed optimization fluxes which have been computed in part directly
	1407	!-- inside the WS advection routines are treated seperatly
	1408	!-- Momentum fluxes first:
[2232]	1409
	1410	tn = 0
	1411	!$OMP PARALLEL PRIVATE( i, j, k, tn, flag )
	1412	!$ tn = omp_get_thread_num()
[743]	1413	IF ( .NOT. ws_scheme_mom .OR. sr /= 0 ) THEN
[2232]	1414	!$OMP DO
	1415	DO i = nxl, nxr
	1416	DO j = nys, nyn
	1417	DO k = nzb, nzt
[1007]	1418	!
[2232]	1419	!-- Flag 23 is used to mask surface fluxes as well as model-top
	1420	!-- fluxes, which are added further below.
	1421	flag = MERGE( 1.0_wp, 0.0_wp, &
[4346]	1422	BTEST( wall_flags_total_0(k,j,i), 23 ) ) * &
[2232]	1423	MERGE( 1.0_wp, 0.0_wp, &
[4346]	1424	BTEST( wall_flags_total_0(k,j,i), 9 ) )
[2232]	1425
	1426	ust = 0.5_wp * ( u(k,j,i) - hom(k,1,1,sr) + &
	1427	u(k+1,j,i) - hom(k+1,1,1,sr) )
	1428	vst = 0.5_wp * ( v(k,j,i) - hom(k,1,2,sr) + &
	1429	v(k+1,j,i) - hom(k+1,1,2,sr) )
[667]	1430	!
[2232]	1431	!-- Momentum flux wu
	1432	sums_l(k,13,tn) = sums_l(k,13,tn) + 0.5_wp * &
	1433	( w(k,j,i-1) + w(k,j,i) ) &
[2674]	1434	* rho_air_zw(k) &
[2232]	1435	* momentumflux_output_conversion(k) &
	1436	* ust * rmask(j,i,sr) &
	1437	* flag
	1438	!
	1439	!-- Momentum flux wv
	1440	sums_l(k,15,tn) = sums_l(k,15,tn) + 0.5_wp * &
	1441	( w(k,j-1,i) + w(k,j,i) ) &
[2674]	1442	* rho_air_zw(k) &
[2232]	1443	* momentumflux_output_conversion(k) &
	1444	* vst * rmask(j,i,sr) &
	1445	* flag
	1446	ENDDO
	1447	ENDDO
	1448	ENDDO
[1]	1449
[667]	1450	ENDIF
[1567]	1451	IF ( .NOT. ws_scheme_sca .OR. sr /= 0 ) THEN
[2232]	1452	!$OMP DO
	1453	DO i = nxl, nxr
	1454	DO j = nys, nyn
	1455	DO k = nzb, nzt
	1456	flag = MERGE( 1.0_wp, 0.0_wp, &
[4346]	1457	BTEST( wall_flags_total_0(k,j,i), 23 ) ) * &
[2232]	1458	MERGE( 1.0_wp, 0.0_wp, &
[4346]	1459	BTEST( wall_flags_total_0(k,j,i), 9 ) )
[709]	1460	!
[2232]	1461	!-- Vertical heat flux
	1462	sums_l(k,17,tn) = sums_l(k,17,tn) + 0.5_wp * &
[1353]	1463	( pt(k,j,i) - hom(k,1,4,sr) + &
	1464	pt(k+1,j,i) - hom(k+1,1,4,sr) ) &
[4039]	1465	* rho_air_zw(k) &
[2037]	1466	* heatflux_output_conversion(k) &
[2232]	1467	* w(k,j,i) * rmask(j,i,sr) * flag
	1468	IF ( humidity ) THEN
	1469	pts = 0.5_wp * ( q(k,j,i) - hom(k,1,41,sr) + &
[1353]	1470	q(k+1,j,i) - hom(k+1,1,41,sr) )
[2232]	1471	sums_l(k,49,tn) = sums_l(k,49,tn) + pts * w(k,j,i) * &
[4039]	1472	rho_air_zw(k) * &
[2037]	1473	waterflux_output_conversion(k) * &
[2232]	1474	rmask(j,i,sr) * flag
	1475	ENDIF
	1476	IF ( passive_scalar ) THEN
[2270]	1477	pts = 0.5_wp * ( s(k,j,i) - hom(k,1,115,sr) + &
	1478	s(k+1,j,i) - hom(k+1,1,115,sr) )
	1479	sums_l(k,114,tn) = sums_l(k,114,tn) + pts * w(k,j,i) * &
[2232]	1480	rmask(j,i,sr) * flag
	1481	ENDIF
	1482	ENDDO
	1483	ENDDO
	1484	ENDDO
[667]	1485
	1486	ENDIF
	1487
[1]	1488	!
[97]	1489	!-- Density at top follows Neumann condition
[3294]	1490	IF ( ocean_mode ) THEN
[388]	1491	sums_l(nzt+1,64,tn) = sums_l(nzt,64,tn)
	1492	sums_l(nzt+1,71,tn) = sums_l(nzt,71,tn)
	1493	ENDIF
[97]	1494
	1495	!
[1]	1496	!-- Divergence of vertical flux of resolved scale energy and pressure
[106]	1497	!-- fluctuations as well as flux of pressure fluctuation itself (68).
	1498	!-- First calculate the products, then the divergence.
[1]	1499	!-- Calculation is time consuming. Do it only, if profiles shall be plotted.
[1691]	1500	IF ( hom(nzb+1,2,55,0) /= 0.0_wp .OR. hom(nzb+1,2,68,0) /= 0.0_wp ) &
	1501	THEN
[1353]	1502	sums_ll = 0.0_wp ! local array
[1]	1503
	1504	!$OMP DO
	1505	DO i = nxl, nxr
	1506	DO j = nys, nyn
[2232]	1507	DO k = nzb+1, nzt
[4346]	1508	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 0 ) )
[1]	1509
[1353]	1510	sums_ll(k,1) = sums_ll(k,1) + 0.5_wp * w(k,j,i) * ( &
[1652]	1511	( 0.25_wp * ( u(k,j,i)+u(k+1,j,i)+u(k,j,i+1)+u(k+1,j,i+1) ) &
	1512	- 0.5_wp * ( hom(k,1,1,sr) + hom(k+1,1,1,sr) ) )**2&
	1513	+ ( 0.25_wp * ( v(k,j,i)+v(k+1,j,i)+v(k,j+1,i)+v(k+1,j+1,i) ) &
[1654]	1514	- 0.5_wp * ( hom(k,1,2,sr) + hom(k+1,1,2,sr) ) )**2&
[2232]	1515	+ w(k,j,i)*2 ) flag
[1]	1516
[1353]	1517	sums_ll(k,2) = sums_ll(k,2) + 0.5_wp * w(k,j,i) &
[2252]	1518	* ( ( p(k,j,i) + p(k+1,j,i) ) &
	1519	/ momentumflux_output_conversion(k) ) &
	1520	* flag
[1]	1521
	1522	ENDDO
	1523	ENDDO
	1524	ENDDO
[1353]	1525	sums_ll(0,1) = 0.0_wp ! because w is zero at the bottom
	1526	sums_ll(nzt+1,1) = 0.0_wp
	1527	sums_ll(0,2) = 0.0_wp
	1528	sums_ll(nzt+1,2) = 0.0_wp
[1]	1529
[678]	1530	DO k = nzb+1, nzt
[1]	1531	sums_l(k,55,tn) = ( sums_ll(k,1) - sums_ll(k-1,1) ) * ddzw(k)
	1532	sums_l(k,56,tn) = ( sums_ll(k,2) - sums_ll(k-1,2) ) * ddzw(k)
[106]	1533	sums_l(k,68,tn) = sums_ll(k,2)
[1]	1534	ENDDO
	1535	sums_l(nzb,55,tn) = sums_l(nzb+1,55,tn)
	1536	sums_l(nzb,56,tn) = sums_l(nzb+1,56,tn)
[1353]	1537	sums_l(nzb,68,tn) = 0.0_wp ! because w* = 0 at nzb
[1]	1538
	1539	ENDIF
	1540
	1541	!
[106]	1542	!-- Divergence of vertical flux of SGS TKE and the flux itself (69)
[1691]	1543	IF ( hom(nzb+1,2,57,0) /= 0.0_wp .OR. hom(nzb+1,2,69,0) /= 0.0_wp ) &
	1544	THEN
[1]	1545	!$OMP DO
	1546	DO i = nxl, nxr
	1547	DO j = nys, nyn
[2232]	1548	DO k = nzb+1, nzt
[1]	1549
[4346]	1550	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 0 ) )
[2232]	1551
[1353]	1552	sums_l(k,57,tn) = sums_l(k,57,tn) - 0.5_wp * ( &
[1]	1553	(km(k,j,i)+km(k+1,j,i)) * (e(k+1,j,i)-e(k,j,i)) * ddzu(k+1) &
	1554	- (km(k-1,j,i)+km(k,j,i)) * (e(k,j,i)-e(k-1,j,i)) * ddzu(k) &
[2232]	1555	) * ddzw(k) &
	1556	* flag
[1]	1557
[1353]	1558	sums_l(k,69,tn) = sums_l(k,69,tn) - 0.5_wp * ( &
[106]	1559	(km(k,j,i)+km(k+1,j,i)) * (e(k+1,j,i)-e(k,j,i)) * ddzu(k+1) &
[2232]	1560	) * flag
[106]	1561
[1]	1562	ENDDO
	1563	ENDDO
	1564	ENDDO
	1565	sums_l(nzb,57,tn) = sums_l(nzb+1,57,tn)
[106]	1566	sums_l(nzb,69,tn) = sums_l(nzb+1,69,tn)
[1]	1567
	1568	ENDIF
	1569
	1570	!
	1571	!-- Horizontal heat fluxes (subgrid, resolved, total).
	1572	!-- Do it only, if profiles shall be plotted.
[1353]	1573	IF ( hom(nzb+1,2,58,0) /= 0.0_wp ) THEN
[1]	1574
	1575	!$OMP DO
	1576	DO i = nxl, nxr
	1577	DO j = nys, nyn
[2232]	1578	DO k = nzb+1, nzt
[4346]	1579	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 0 ) )
[1]	1580	!
	1581	!-- Subgrid horizontal heat fluxes u"pt", v"pt"
[1353]	1582	sums_l(k,58,tn) = sums_l(k,58,tn) - 0.5_wp * &
[1]	1583	( kh(k,j,i) + kh(k,j,i-1) ) &
	1584	* ( pt(k,j,i-1) - pt(k,j,i) ) &
[2037]	1585	* rho_air_zw(k) &
	1586	* heatflux_output_conversion(k) &
[2232]	1587	* ddx * rmask(j,i,sr) * flag
[1353]	1588	sums_l(k,61,tn) = sums_l(k,61,tn) - 0.5_wp * &
[1]	1589	( kh(k,j,i) + kh(k,j-1,i) ) &
	1590	* ( pt(k,j-1,i) - pt(k,j,i) ) &
[2037]	1591	* rho_air_zw(k) &
	1592	* heatflux_output_conversion(k) &
[2232]	1593	* ddy * rmask(j,i,sr) * flag
[1]	1594	!
	1595	!-- Resolved horizontal heat fluxes upt, vpt
	1596	sums_l(k,59,tn) = sums_l(k,59,tn) + &
	1597	( u(k,j,i) - hom(k,1,1,sr) ) &
[1353]	1598	* 0.5_wp * ( pt(k,j,i-1) - hom(k,1,4,sr) + &
[2037]	1599	pt(k,j,i) - hom(k,1,4,sr) ) &
[2232]	1600	* heatflux_output_conversion(k) &
	1601	* flag
[1353]	1602	pts = 0.5_wp * ( pt(k,j-1,i) - hom(k,1,4,sr) + &
	1603	pt(k,j,i) - hom(k,1,4,sr) )
[1]	1604	sums_l(k,62,tn) = sums_l(k,62,tn) + &
	1605	( v(k,j,i) - hom(k,1,2,sr) ) &
[1353]	1606	* 0.5_wp * ( pt(k,j-1,i) - hom(k,1,4,sr) + &
[2037]	1607	pt(k,j,i) - hom(k,1,4,sr) ) &
[2232]	1608	* heatflux_output_conversion(k) &
	1609	* flag
[1]	1610	ENDDO
	1611	ENDDO
	1612	ENDDO
	1613	!
	1614	!-- Fluxes at the surface must be zero (e.g. due to the Prandtl-layer)
[1353]	1615	sums_l(nzb,58,tn) = 0.0_wp
	1616	sums_l(nzb,59,tn) = 0.0_wp
	1617	sums_l(nzb,60,tn) = 0.0_wp
	1618	sums_l(nzb,61,tn) = 0.0_wp
	1619	sums_l(nzb,62,tn) = 0.0_wp
	1620	sums_l(nzb,63,tn) = 0.0_wp
[1]	1621
	1622	ENDIF
[2073]	1623	!$OMP END PARALLEL
[87]	1624
	1625	!
[1365]	1626	!-- Collect current large scale advection and subsidence tendencies for
	1627	!-- data output
[1691]	1628	IF ( large_scale_forcing .AND. ( simulated_time > 0.0_wp ) ) THEN
[1365]	1629	!
	1630	!-- Interpolation in time of LSF_DATA
	1631	nt = 1
[1386]	1632	DO WHILE ( simulated_time - dt_3d > time_vert(nt) )
[1365]	1633	nt = nt + 1
	1634	ENDDO
[1386]	1635	IF ( simulated_time - dt_3d /= time_vert(nt) ) THEN
[1365]	1636	nt = nt - 1
	1637	ENDIF
	1638
[1386]	1639	fac = ( simulated_time - dt_3d - time_vert(nt) ) &
[1365]	1640	/ ( time_vert(nt+1)-time_vert(nt) )
	1641
	1642
	1643	DO k = nzb, nzt
[1382]	1644	sums_ls_l(k,0) = td_lsa_lpt(k,nt) &
	1645	+ fac * ( td_lsa_lpt(k,nt+1) - td_lsa_lpt(k,nt) )
	1646	sums_ls_l(k,1) = td_lsa_q(k,nt) &
	1647	+ fac * ( td_lsa_q(k,nt+1) - td_lsa_q(k,nt) )
[1365]	1648	ENDDO
	1649
[1382]	1650	sums_ls_l(nzt+1,0) = sums_ls_l(nzt,0)
	1651	sums_ls_l(nzt+1,1) = sums_ls_l(nzt,1)
	1652
[1365]	1653	IF ( large_scale_subsidence .AND. use_subsidence_tendencies ) THEN
	1654
	1655	DO k = nzb, nzt
[1382]	1656	sums_ls_l(k,2) = td_sub_lpt(k,nt) + fac * &
	1657	( td_sub_lpt(k,nt+1) - td_sub_lpt(k,nt) )
	1658	sums_ls_l(k,3) = td_sub_q(k,nt) + fac * &
	1659	( td_sub_q(k,nt+1) - td_sub_q(k,nt) )
[1365]	1660	ENDDO
	1661
[1382]	1662	sums_ls_l(nzt+1,2) = sums_ls_l(nzt,2)
	1663	sums_ls_l(nzt+1,3) = sums_ls_l(nzt,3)
	1664
[1365]	1665	ENDIF
	1666
	1667	ENDIF
	1668
[2232]	1669	tn = 0
[2073]	1670	!$OMP PARALLEL PRIVATE( i, j, k, tn )
[2232]	1671	!$ tn = omp_get_thread_num()
[1585]	1672	IF ( radiation .AND. radiation_scheme == 'rrtmg' ) THEN
	1673	!$OMP DO
	1674	DO i = nxl, nxr
	1675	DO j = nys, nyn
[2232]	1676	DO k = nzb+1, nzt+1
[4346]	1677	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 0 ) )
[2232]	1678
[2270]	1679	sums_l(k,100,tn) = sums_l(k,100,tn) + rad_lw_in(k,j,i) &
[2232]	1680	* rmask(j,i,sr) * flag
[2270]	1681	sums_l(k,101,tn) = sums_l(k,101,tn) + rad_lw_out(k,j,i) &
[2232]	1682	* rmask(j,i,sr) * flag
[2270]	1683	sums_l(k,102,tn) = sums_l(k,102,tn) + rad_sw_in(k,j,i) &
[2232]	1684	* rmask(j,i,sr) * flag
[2270]	1685	sums_l(k,103,tn) = sums_l(k,103,tn) + rad_sw_out(k,j,i) &
[2232]	1686	* rmask(j,i,sr) * flag
[2270]	1687	sums_l(k,104,tn) = sums_l(k,104,tn) + rad_lw_cs_hr(k,j,i) &
[2232]	1688	* rmask(j,i,sr) * flag
[2270]	1689	sums_l(k,105,tn) = sums_l(k,105,tn) + rad_lw_hr(k,j,i) &
[2232]	1690	* rmask(j,i,sr) * flag
[2270]	1691	sums_l(k,106,tn) = sums_l(k,106,tn) + rad_sw_cs_hr(k,j,i) &
[2232]	1692	* rmask(j,i,sr) * flag
[2270]	1693	sums_l(k,107,tn) = sums_l(k,107,tn) + rad_sw_hr(k,j,i) &
[2232]	1694	* rmask(j,i,sr) * flag
[1585]	1695	ENDDO
	1696	ENDDO
	1697	ENDDO
	1698	ENDIF
[3637]	1699
[1365]	1700	!
[3637]	1701	!-- Calculate the profiles for all other modules
	1702	CALL module_interface_statistics( 'profiles', sr, tn, dots_max )
[3651]	1703	!$OMP END PARALLEL
[1]	1704
	1705	!
	1706	!-- Summation of thread sums
	1707	IF ( threads_per_task > 1 ) THEN
	1708	DO i = 1, threads_per_task-1
[4464]	1709	sums_l(:,3,0) = sums_l(:,3,0) + sums_l(:,3,i)
[1]	1710	sums_l(:,4:40,0) = sums_l(:,4:40,0) + sums_l(:,4:40,i)
[87]	1711	sums_l(:,45:pr_palm,0) = sums_l(:,45:pr_palm,0) + &
	1712	sums_l(:,45:pr_palm,i)
	1713	IF ( max_pr_user > 0 ) THEN
	1714	sums_l(:,pr_palm+1:pr_palm+max_pr_user,0) = &
	1715	sums_l(:,pr_palm+1:pr_palm+max_pr_user,0) + &
	1716	sums_l(:,pr_palm+1:pr_palm+max_pr_user,i)
	1717	ENDIF
[3298]	1718
	1719	IF ( air_chemistry ) THEN
	1720	IF ( max_pr_cs > 0 ) THEN
	1721	sums_l(:,pr_palm+max_pr_user+1:pr_palm + max_pr_user+ max_pr_cs,0) = &
	1722	sums_l(:,pr_palm+max_pr_user+1:pr_palm + max_pr_user+max_pr_cs,0) + &
	1723	sums_l(:,pr_palm+max_pr_user+1:pr_palm + max_pr_user+max_pr_cs,i)
	1724
	1725	ENDIF
	1726	ENDIF
[4131]	1727	IF ( salsa ) THEN
	1728	IF ( max_pr_cs > 0 ) THEN
	1729	sums_l(:,pr_palm+max_pr_user+max_pr_cs+1:pr_palm+max_pr_user+max_pr_cs+max_pr_salsa,0) = &
	1730	sums_l(:,pr_palm+max_pr_user+max_pr_cs+1:pr_palm+max_pr_user+max_pr_cs+max_pr_salsa,0) + &
	1731	sums_l(:,pr_palm+max_pr_user+max_pr_cs+1:pr_palm+max_pr_user+max_pr_cs+max_pr_salsa,i)
	1732
	1733	ENDIF
	1734	ENDIF
[1]	1735	ENDDO
	1736	ENDIF
	1737
	1738	#if defined( __parallel )
[667]	1739
[1]	1740	!
	1741	!-- Compute total sum from local sums
[622]	1742	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[1365]	1743	CALL MPI_ALLREDUCE( sums_l(nzb,1,0), sums(nzb,1), ngp_sums, MPI_REAL, &
[1]	1744	MPI_SUM, comm2d, ierr )
[1365]	1745	IF ( large_scale_forcing ) THEN
	1746	CALL MPI_ALLREDUCE( sums_ls_l(nzb,2), sums(nzb,83), ngp_sums_ls, &
	1747	MPI_REAL, MPI_SUM, comm2d, ierr )
	1748	ENDIF
[3298]	1749
[3458]	1750	IF ( air_chemistry .AND. max_pr_cs > 0 ) THEN
[3298]	1751	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[3458]	1752	DO i = 1, max_pr_cs
	1753	CALL MPI_ALLREDUCE( sums_l(nzb,pr_palm+max_pr_user+i,0), &
	1754	sums(nzb,pr_palm+max_pr_user+i), &
	1755	nzt+2-nzb, MPI_REAL, MPI_SUM, comm2d, ierr )
	1756	ENDDO
[3298]	1757	ENDIF
	1758
[4131]	1759	IF ( salsa .AND. max_pr_salsa > 0 ) THEN
	1760	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
	1761	DO i = 1, max_pr_salsa
	1762	CALL MPI_ALLREDUCE( sums_l(nzb,pr_palm+max_pr_user+max_pr_cs+i,0), &
	1763	sums(nzb,pr_palm+max_pr_user+max_pr_user+i), &
	1764	nzt+2-nzb, MPI_REAL, MPI_SUM, comm2d, ierr )
	1765	ENDDO
	1766	ENDIF
	1767
[1]	1768	#else
	1769	sums = sums_l(:,:,0)
[1365]	1770	IF ( large_scale_forcing ) THEN
	1771	sums(:,81:88) = sums_ls_l
	1772	ENDIF
[1]	1773	#endif
	1774
	1775	!
	1776	!-- Final values are obtained by division by the total number of grid points
	1777	!-- used for summation. After that store profiles.
[1738]	1778	!-- Check, if statistical regions do contain at least one grid point at the
	1779	!-- respective k-level, otherwise division by zero will lead to undefined
	1780	!-- values, which may cause e.g. problems with NetCDF output
[1]	1781	!-- Profiles:
	1782	DO k = nzb, nzt+1
[4464]	1783	sums(k,3) = sums(k,3) / ngp_2dh(sr)
[1738]	1784	sums(k,12:22) = sums(k,12:22) / ngp_2dh(sr)
	1785	sums(k,30:32) = sums(k,30:32) / ngp_2dh(sr)
	1786	sums(k,35:39) = sums(k,35:39) / ngp_2dh(sr)
	1787	sums(k,45:53) = sums(k,45:53) / ngp_2dh(sr)
	1788	sums(k,55:63) = sums(k,55:63) / ngp_2dh(sr)
	1789	sums(k,81:88) = sums(k,81:88) / ngp_2dh(sr)
[2270]	1790	sums(k,89:112) = sums(k,89:112) / ngp_2dh(sr)
	1791	sums(k,114) = sums(k,114) / ngp_2dh(sr)
	1792	sums(k,117) = sums(k,117) / ngp_2dh(sr)
[1738]	1793	IF ( ngp_2dh_s_inner(k,sr) /= 0 ) THEN
	1794	sums(k,8:11) = sums(k,8:11) / ngp_2dh_s_inner(k,sr)
	1795	sums(k,23:29) = sums(k,23:29) / ngp_2dh_s_inner(k,sr)
	1796	sums(k,33:34) = sums(k,33:34) / ngp_2dh_s_inner(k,sr)
	1797	sums(k,40) = sums(k,40) / ngp_2dh_s_inner(k,sr)
	1798	sums(k,54) = sums(k,54) / ngp_2dh_s_inner(k,sr)
	1799	sums(k,64) = sums(k,64) / ngp_2dh_s_inner(k,sr)
	1800	sums(k,70:80) = sums(k,70:80) / ngp_2dh_s_inner(k,sr)
[2270]	1801	sums(k,116) = sums(k,116) / ngp_2dh_s_inner(k,sr)
	1802	sums(k,118:pr_palm-2) = sums(k,118:pr_palm-2) / ngp_2dh_s_inner(k,sr)
[3452]	1803	sums(k,123) = sums(k,123) * ngp_2dh_s_inner(k,sr) / ngp_2dh(sr)
[1738]	1804	ENDIF
[1]	1805	ENDDO
[667]	1806
[1]	1807	!-- u* and so on
[87]	1808	!-- As sums(nzb:nzb+3,pr_palm) are full 2D arrays (us, usws, vsws, ts) whose
[1]	1809	!-- size is always ( nx + 1 ) * ( ny + 1 ), defined at the first grid layer
	1810	!-- above the topography, they are being divided by ngp_2dh(sr)
[87]	1811	sums(nzb:nzb+3,pr_palm) = sums(nzb:nzb+3,pr_palm) / &
[1]	1812	ngp_2dh(sr)
[197]	1813	sums(nzb+12,pr_palm) = sums(nzb+12,pr_palm) / & ! qs
	1814	ngp_2dh(sr)
[1960]	1815	sums(nzb+13,pr_palm) = sums(nzb+13,pr_palm) / & ! ss
	1816	ngp_2dh(sr)
[2773]	1817	sums(nzb+14,pr_palm) = sums(nzb+14,pr_palm) / & ! surface temperature
	1818	ngp_2dh(sr)
[1]	1819	!-- eges, e*
[87]	1820	sums(nzb+4:nzb+5,pr_palm) = sums(nzb+4:nzb+5,pr_palm) / &
[132]	1821	ngp_3d(sr)
[1]	1822	!-- Old and new divergence
[87]	1823	sums(nzb+9:nzb+10,pr_palm) = sums(nzb+9:nzb+10,pr_palm) / &
[1]	1824	ngp_3d_inner(sr)
	1825
[87]	1826	!-- User-defined profiles
	1827	IF ( max_pr_user > 0 ) THEN
	1828	DO k = nzb, nzt+1
	1829	sums(k,pr_palm+1:pr_palm+max_pr_user) = &
	1830	sums(k,pr_palm+1:pr_palm+max_pr_user) / &
[132]	1831	ngp_2dh_s_inner(k,sr)
[87]	1832	ENDDO
	1833	ENDIF
[1007]	1834
[3298]	1835	IF ( air_chemistry ) THEN
	1836	IF ( max_pr_cs > 0 ) THEN
	1837	DO k = nzb, nzt+1
	1838	sums(k, pr_palm+1:pr_palm+max_pr_user+max_pr_cs) = &
	1839	sums(k, pr_palm+1:pr_palm+max_pr_user+max_pr_cs) / &
	1840	ngp_2dh_s_inner(k,sr)
	1841	ENDDO
	1842	ENDIF
	1843	ENDIF
	1844
[4131]	1845	IF ( salsa ) THEN
	1846	IF ( max_pr_salsa > 0 ) THEN
	1847	DO k = nzb, nzt+1
	1848	sums(k,pr_palm+max_pr_user+max_pr_cs+1:pr_palm+max_pr_user+max_pr_cs+max_pr_salsa) = &
	1849	sums(k,pr_palm+max_pr_user+max_pr_cs+1:pr_palm+max_pr_user+max_pr_cs+max_pr_salsa) &
	1850	/ ngp_2dh_s_inner(k,sr)
	1851	ENDDO
	1852	ENDIF
	1853	ENDIF
	1854
[1]	1855	!
	1856	!-- Collect horizontal average in hom.
	1857	!-- Compute deduced averages (e.g. total heat flux)
[4464]	1858	hom(:,1,3,sr) = sums(:,3) ! w
[1]	1859	hom(:,1,8,sr) = sums(:,8) ! e profiles 5-7 are initial profiles
	1860	hom(:,1,9,sr) = sums(:,9) ! km
	1861	hom(:,1,10,sr) = sums(:,10) ! kh
	1862	hom(:,1,11,sr) = sums(:,11) ! l
	1863	hom(:,1,12,sr) = sums(:,12) ! w"u"
	1864	hom(:,1,13,sr) = sums(:,13) ! wu
	1865	hom(:,1,14,sr) = sums(:,14) ! w"v"
	1866	hom(:,1,15,sr) = sums(:,15) ! wv
	1867	hom(:,1,16,sr) = sums(:,16) ! w"pt"
	1868	hom(:,1,17,sr) = sums(:,17) ! wpt
	1869	hom(:,1,18,sr) = sums(:,16) + sums(:,17) ! wpt
	1870	hom(:,1,19,sr) = sums(:,12) + sums(:,13) ! wu
	1871	hom(:,1,20,sr) = sums(:,14) + sums(:,15) ! wv
	1872	hom(:,1,21,sr) = sums(:,21) ! wptBC
	1873	hom(:,1,22,sr) = sums(:,16) + sums(:,21) ! wptBC
[96]	1874	! profile 24 is initial profile (sa)
	1875	! profiles 25-29 left empty for initial
[1]	1876	! profiles
	1877	hom(:,1,30,sr) = sums(:,30) ! u*2
	1878	hom(:,1,31,sr) = sums(:,31) ! v*2
	1879	hom(:,1,32,sr) = sums(:,32) ! w*2
	1880	hom(:,1,33,sr) = sums(:,33) ! pt*2
	1881	hom(:,1,34,sr) = sums(:,34) ! e*
	1882	hom(:,1,35,sr) = sums(:,35) ! w2pt
	1883	hom(:,1,36,sr) = sums(:,36) ! wpt2
	1884	hom(:,1,37,sr) = sums(:,37) ! we
	1885	hom(:,1,38,sr) = sums(:,38) ! w*3
[1353]	1886	hom(:,1,39,sr) = sums(:,38) / ( abs( sums(:,32) ) + 1E-20_wp )**1.5_wp ! Sw
[1]	1887	hom(:,1,40,sr) = sums(:,40) ! p
[531]	1888	hom(:,1,45,sr) = sums(:,45) ! w"vpt"
[1]	1889	hom(:,1,46,sr) = sums(:,46) ! wvpt
	1890	hom(:,1,47,sr) = sums(:,45) + sums(:,46) ! wvpt
	1891	hom(:,1,48,sr) = sums(:,48) ! w"q" (w"qv")
	1892	hom(:,1,49,sr) = sums(:,49) ! wq (wqv)
	1893	hom(:,1,50,sr) = sums(:,48) + sums(:,49) ! wq (wqv)
	1894	hom(:,1,51,sr) = sums(:,51) ! w"qv"
	1895	hom(:,1,52,sr) = sums(:,52) ! wqv
	1896	hom(:,1,53,sr) = sums(:,52) + sums(:,51) ! wq (wqv)
	1897	hom(:,1,54,sr) = sums(:,54) ! ql
	1898	hom(:,1,55,sr) = sums(:,55) ! wuu*/dz
	1899	hom(:,1,56,sr) = sums(:,56) ! wp/dz
[2031]	1900	hom(:,1,57,sr) = sums(:,57) ! ( w"e + w"p"/rho_ocean )/dz
[1]	1901	hom(:,1,58,sr) = sums(:,58) ! u"pt"
	1902	hom(:,1,59,sr) = sums(:,59) ! upt
	1903	hom(:,1,60,sr) = sums(:,58) + sums(:,59) ! upt_t
	1904	hom(:,1,61,sr) = sums(:,61) ! v"pt"
	1905	hom(:,1,62,sr) = sums(:,62) ! vpt
	1906	hom(:,1,63,sr) = sums(:,61) + sums(:,62) ! vpt_t
[2031]	1907	hom(:,1,64,sr) = sums(:,64) ! rho_ocean
[96]	1908	hom(:,1,65,sr) = sums(:,65) ! w"sa"
	1909	hom(:,1,66,sr) = sums(:,66) ! wsa
	1910	hom(:,1,67,sr) = sums(:,65) + sums(:,66) ! wsa
[106]	1911	hom(:,1,68,sr) = sums(:,68) ! wp
[2031]	1912	hom(:,1,69,sr) = sums(:,69) ! w"e + w"p"/rho_ocean
[197]	1913	hom(:,1,70,sr) = sums(:,70) ! q*2
[388]	1914	hom(:,1,71,sr) = sums(:,71) ! prho
[2252]	1915	hom(:,1,72,sr) = hyp * 1E-2_wp ! hyp in hPa
[2292]	1916	hom(:,1,123,sr) = sums(:,123) ! nc
[1053]	1917	hom(:,1,73,sr) = sums(:,73) ! nr
	1918	hom(:,1,74,sr) = sums(:,74) ! qr
	1919	hom(:,1,75,sr) = sums(:,75) ! qc
	1920	hom(:,1,76,sr) = sums(:,76) ! prr (precipitation rate)
[1179]	1921	! 77 is initial density profile
[1241]	1922	hom(:,1,78,sr) = ug ! ug
	1923	hom(:,1,79,sr) = vg ! vg
[1299]	1924	hom(:,1,80,sr) = w_subs ! w_subs
[1]	1925
[1365]	1926	IF ( large_scale_forcing ) THEN
[1382]	1927	hom(:,1,81,sr) = sums_ls_l(:,0) ! td_lsa_lpt
	1928	hom(:,1,82,sr) = sums_ls_l(:,1) ! td_lsa_q
[1365]	1929	IF ( use_subsidence_tendencies ) THEN
[1382]	1930	hom(:,1,83,sr) = sums_ls_l(:,2) ! td_sub_lpt
	1931	hom(:,1,84,sr) = sums_ls_l(:,3) ! td_sub_q
[1365]	1932	ELSE
[1382]	1933	hom(:,1,83,sr) = sums(:,83) ! td_sub_lpt
	1934	hom(:,1,84,sr) = sums(:,84) ! td_sub_q
[1365]	1935	ENDIF
[1382]	1936	hom(:,1,85,sr) = sums(:,85) ! td_nud_lpt
	1937	hom(:,1,86,sr) = sums(:,86) ! td_nud_q
	1938	hom(:,1,87,sr) = sums(:,87) ! td_nud_u
	1939	hom(:,1,88,sr) = sums(:,88) ! td_nud_v
[1365]	1940	ENDIF
	1941
[1551]	1942	IF ( land_surface ) THEN
	1943	hom(:,1,89,sr) = sums(:,89) ! t_soil
	1944	! 90 is initial t_soil profile
	1945	hom(:,1,91,sr) = sums(:,91) ! m_soil
	1946	! 92 is initial m_soil profile
[2270]	1947	hom(:,1,93,sr) = sums(:,93) ! ghf
	1948	hom(:,1,94,sr) = sums(:,94) ! qsws_liq
	1949	hom(:,1,95,sr) = sums(:,95) ! qsws_soil
	1950	hom(:,1,96,sr) = sums(:,96) ! qsws_veg
	1951	hom(:,1,97,sr) = sums(:,97) ! r_a
	1952	hom(:,1,98,sr) = sums(:,98) ! r_s
[1555]	1953
[1551]	1954	ENDIF
	1955
	1956	IF ( radiation ) THEN
[2270]	1957	hom(:,1,99,sr) = sums(:,99) ! rad_net
	1958	hom(:,1,100,sr) = sums(:,100) ! rad_lw_in
	1959	hom(:,1,101,sr) = sums(:,101) ! rad_lw_out
	1960	hom(:,1,102,sr) = sums(:,102) ! rad_sw_in
	1961	hom(:,1,103,sr) = sums(:,103) ! rad_sw_out
[1585]	1962
[1691]	1963	IF ( radiation_scheme == 'rrtmg' ) THEN
[2270]	1964	hom(:,1,104,sr) = sums(:,104) ! rad_lw_cs_hr
	1965	hom(:,1,105,sr) = sums(:,105) ! rad_lw_hr
	1966	hom(:,1,106,sr) = sums(:,106) ! rad_sw_cs_hr
	1967	hom(:,1,107,sr) = sums(:,107) ! rad_sw_hr
[1691]	1968
[2270]	1969	hom(:,1,108,sr) = sums(:,108) ! rrtm_aldif
	1970	hom(:,1,109,sr) = sums(:,109) ! rrtm_aldir
	1971	hom(:,1,110,sr) = sums(:,110) ! rrtm_asdif
	1972	hom(:,1,111,sr) = sums(:,111) ! rrtm_asdir
[1585]	1973	ENDIF
[1551]	1974	ENDIF
	1975
[2270]	1976	hom(:,1,112,sr) = sums(:,112) !: L
[1691]	1977
[1960]	1978	IF ( passive_scalar ) THEN
[2270]	1979	hom(:,1,117,sr) = sums(:,117) ! w"s"
	1980	hom(:,1,114,sr) = sums(:,114) ! ws
	1981	hom(:,1,118,sr) = sums(:,117) + sums(:,114) ! ws
	1982	hom(:,1,116,sr) = sums(:,116) ! s*2
[1960]	1983	ENDIF
	1984
[2270]	1985	hom(:,1,119,sr) = rho_air ! rho_air in Kg/m^3
	1986	hom(:,1,120,sr) = rho_air_zw ! rho_air_zw in Kg/m^3
[2037]	1987
[667]	1988	hom(:,1,pr_palm,sr) = sums(:,pr_palm)
[1]	1989	! u, w'u', w'v', t (in last profile)
	1990
[87]	1991	IF ( max_pr_user > 0 ) THEN ! user-defined profiles
	1992	hom(:,1,pr_palm+1:pr_palm+max_pr_user,sr) = &
	1993	sums(:,pr_palm+1:pr_palm+max_pr_user)
	1994	ENDIF
	1995
[3298]	1996	IF ( air_chemistry ) THEN
	1997	IF ( max_pr_cs > 0 ) THEN ! chem_spcs profiles
	1998	hom(:, 1, pr_palm+max_pr_user+1:pr_palm + max_pr_user+max_pr_cs, sr) = &
	1999	sums(:, pr_palm+max_pr_user+1:pr_palm+max_pr_user+max_pr_cs)
	2000	ENDIF
	2001	ENDIF
[4131]	2002
	2003	IF ( salsa ) THEN
	2004	IF ( max_pr_salsa > 0 ) THEN ! salsa profiles
	2005	hom(:,1,pr_palm+max_pr_user+max_pr_cs+1:pr_palm+max_pr_user+max_pr_cs+max_pr_salsa, sr) = &
	2006	sums(:,pr_palm+max_pr_user+max_pr_cs+1:pr_palm+max_pr_user+max_pr_cs+max_pr_salsa)
	2007	ENDIF
	2008	ENDIF
[1]	2009	!
	2010	!-- Determine the boundary layer height using two different schemes.
[94]	2011	!-- First scheme: Starting from the Earth's (Ocean's) surface, look for the
	2012	!-- first relative minimum (maximum) of the total heat flux.
	2013	!-- The corresponding height is assumed as the boundary layer height, if it
	2014	!-- is less than 1.5 times the height where the heat flux becomes negative
[3004]	2015	!-- (positive) for the first time. Attention: the resolved vertical sensible
	2016	!-- heat flux (hom(:,1,17,sr) = wpt) is not known at the beginning because
	2017	!-- the calculation happens in advec_s_ws which is called after
	2018	!-- flow_statistics. Therefore z_i is directly taken from restart data at
	2019	!-- the beginning of restart runs.
[3003]	2020	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .OR. &
	2021	simulated_time_at_begin /= simulated_time ) THEN
[667]	2022
[3003]	2023	z_i(1) = 0.0_wp
	2024	first = .TRUE.
	2025
[3294]	2026	IF ( ocean_mode ) THEN
[3003]	2027	DO k = nzt, nzb+1, -1
	2028	IF ( first .AND. hom(k,1,18,sr) < -1.0E-8_wp ) THEN
	2029	first = .FALSE.
	2030	height = zw(k)
[97]	2031	ENDIF
[3003]	2032	IF ( hom(k,1,18,sr) < -1.0E-8_wp .AND. &
	2033	hom(k-1,1,18,sr) > hom(k,1,18,sr) ) THEN
	2034	IF ( zw(k) < 1.5_wp * height ) THEN
	2035	z_i(1) = zw(k)
	2036	ELSE
	2037	z_i(1) = height
	2038	ENDIF
	2039	EXIT
[94]	2040	ENDIF
[3003]	2041	ENDDO
	2042	ELSE
	2043	DO k = nzb, nzt-1
	2044	IF ( first .AND. hom(k,1,18,sr) < -1.0E-8_wp ) THEN
	2045	first = .FALSE.
	2046	height = zw(k)
	2047	ENDIF
	2048	IF ( hom(k,1,18,sr) < -1.0E-8_wp .AND. &
	2049	hom(k+1,1,18,sr) > hom(k,1,18,sr) ) THEN
	2050	IF ( zw(k) < 1.5_wp * height ) THEN
	2051	z_i(1) = zw(k)
	2052	ELSE
	2053	z_i(1) = height
	2054	ENDIF
	2055	EXIT
	2056	ENDIF
	2057	ENDDO
	2058	ENDIF
[1]	2059
	2060	!
[3003]	2061	!-- Second scheme: Gradient scheme from Sullivan et al. (1998), modified
	2062	!-- by Uhlenbrock(2006). The boundary layer height is the height with the
	2063	!-- maximal local temperature gradient: starting from the second (the
	2064	!-- last but one) vertical gridpoint, the local gradient must be at least
	2065	!-- 0.2K/100m and greater than the next four gradients.
	2066	!-- WARNING: The threshold value of 0.2K/100m must be adjusted for the
	2067	!-- ocean case!
	2068	z_i(2) = 0.0_wp
	2069	DO k = nzb+1, nzt+1
	2070	dptdz(k) = ( hom(k,1,4,sr) - hom(k-1,1,4,sr) ) * ddzu(k)
	2071	ENDDO
	2072	dptdz_threshold = 0.2_wp / 100.0_wp
[291]	2073
[3294]	2074	IF ( ocean_mode ) THEN
[3003]	2075	DO k = nzt+1, nzb+5, -1
	2076	IF ( dptdz(k) > dptdz_threshold .AND. &
	2077	dptdz(k) > dptdz(k-1) .AND. dptdz(k) > dptdz(k-2) .AND.&
	2078	dptdz(k) > dptdz(k-3) .AND. dptdz(k) > dptdz(k-4) ) THEN
	2079	z_i(2) = zw(k-1)
	2080	EXIT
	2081	ENDIF
	2082	ENDDO
	2083	ELSE
	2084	DO k = nzb+1, nzt-3
	2085	IF ( dptdz(k) > dptdz_threshold .AND. &
	2086	dptdz(k) > dptdz(k+1) .AND. dptdz(k) > dptdz(k+2) .AND.&
	2087	dptdz(k) > dptdz(k+3) .AND. dptdz(k) > dptdz(k+4) ) THEN
	2088	z_i(2) = zw(k-1)
	2089	EXIT
	2090	ENDIF
	2091	ENDDO
	2092	ENDIF
	2093
[97]	2094	ENDIF
[1]	2095
[87]	2096	hom(nzb+6,1,pr_palm,sr) = z_i(1)
	2097	hom(nzb+7,1,pr_palm,sr) = z_i(2)
[1]	2098
	2099	!
[1738]	2100	!-- Determine vertical index which is nearest to the mean surface level
	2101	!-- height of the respective statistic region
	2102	DO k = nzb, nzt
	2103	IF ( zw(k) >= mean_surface_level_height(sr) ) THEN
	2104	k_surface_level = k
	2105	EXIT
	2106	ENDIF
	2107	ENDDO
[3003]	2108
[1738]	2109	!
[1]	2110	!-- Computation of both the characteristic vertical velocity and
	2111	!-- the characteristic convective boundary layer temperature.
[1738]	2112	!-- The inversion height entering into the equation is defined with respect
	2113	!-- to the mean surface level height of the respective statistic region.
	2114	!-- The horizontal average at surface level index + 1 is input for the
	2115	!-- average temperature.
	2116	IF ( hom(k_surface_level,1,18,sr) > 1.0E-8_wp .AND. z_i(1) /= 0.0_wp )&
	2117	THEN
[2252]	2118	hom(nzb+8,1,pr_palm,sr) = &
[2037]	2119	( g / hom(k_surface_level+1,1,4,sr) * &
[2252]	2120	( hom(k_surface_level,1,18,sr) / &
	2121	( heatflux_output_conversion(nzb) * rho_air(nzb) ) ) &
[1738]	2122	* ABS( z_i(1) - mean_surface_level_height(sr) ) )**0.333333333_wp
[1]	2123	ELSE
[1353]	2124	hom(nzb+8,1,pr_palm,sr) = 0.0_wp
[1]	2125	ENDIF
	2126
[48]	2127	!
[2968]	2128	!-- Collect the time series quantities. Please note, timeseries quantities
	2129	!-- which are collected from horizontally averaged profiles, e.g. wpt
	2130	!-- or pt(zp), are treated specially. In case of elevated model surfaces,
	2131	!-- index nzb+1 might be within topography and data will be zero. Therefore,
	2132	!-- take value for the first atmosphere index, which is topo_min_level+1.
	2133	ts_value(1,sr) = hom(nzb+4,1,pr_palm,sr) ! E
	2134	ts_value(2,sr) = hom(nzb+5,1,pr_palm,sr) ! E*
[48]	2135	ts_value(3,sr) = dt_3d
[2968]	2136	ts_value(4,sr) = hom(nzb,1,pr_palm,sr) ! u*
	2137	ts_value(5,sr) = hom(nzb+3,1,pr_palm,sr) ! th*
[48]	2138	ts_value(6,sr) = u_max
	2139	ts_value(7,sr) = v_max
	2140	ts_value(8,sr) = w_max
[2968]	2141	ts_value(9,sr) = hom(nzb+10,1,pr_palm,sr) ! new divergence
	2142	ts_value(10,sr) = hom(nzb+9,1,pr_palm,sr) ! old Divergence
	2143	ts_value(11,sr) = hom(nzb+6,1,pr_palm,sr) ! z_i(1)
	2144	ts_value(12,sr) = hom(nzb+7,1,pr_palm,sr) ! z_i(2)
	2145	ts_value(13,sr) = hom(nzb+8,1,pr_palm,sr) ! w*
	2146	ts_value(14,sr) = hom(nzb,1,16,sr) ! w'pt' at k=0
	2147	ts_value(15,sr) = hom(topo_min_level+1,1,16,sr) ! w'pt' at k=1
	2148	ts_value(16,sr) = hom(topo_min_level+1,1,18,sr) ! wpt at k=1
	2149	ts_value(17,sr) = hom(nzb+14,1,pr_palm,sr) ! pt(0)
	2150	ts_value(18,sr) = hom(topo_min_level+1,1,4,sr) ! pt(zp)
	2151	ts_value(19,sr) = hom(nzb+1,1,pr_palm,sr) ! u'w' at k=0
	2152	ts_value(20,sr) = hom(nzb+2,1,pr_palm,sr) ! v'w' at k=0
	2153	ts_value(21,sr) = hom(nzb,1,48,sr) ! w"q" at k=0
[1709]	2154
	2155	IF ( .NOT. neutral ) THEN
[2270]	2156	ts_value(22,sr) = hom(nzb,1,112,sr) ! L
[48]	2157	ELSE
[1709]	2158	ts_value(22,sr) = 1.0E10_wp
[48]	2159	ENDIF
[1]	2160
[343]	2161	ts_value(23,sr) = hom(nzb+12,1,pr_palm,sr) ! q*
[1551]	2162
[1960]	2163	IF ( passive_scalar ) THEN
[2270]	2164	ts_value(24,sr) = hom(nzb+13,1,117,sr) ! w"s" ( to do ! )
[1960]	2165	ts_value(25,sr) = hom(nzb+13,1,pr_palm,sr) ! s*
	2166	ENDIF
	2167
[1]	2168	!
[1551]	2169	!-- Collect land surface model timeseries
	2170	IF ( land_surface ) THEN
[2270]	2171	ts_value(dots_soil ,sr) = hom(nzb,1,93,sr) ! ghf
	2172	ts_value(dots_soil+1,sr) = hom(nzb,1,94,sr) ! qsws_liq
	2173	ts_value(dots_soil+2,sr) = hom(nzb,1,95,sr) ! qsws_soil
	2174	ts_value(dots_soil+3,sr) = hom(nzb,1,96,sr) ! qsws_veg
	2175	ts_value(dots_soil+4,sr) = hom(nzb,1,97,sr) ! r_a
	2176	ts_value(dots_soil+5,sr) = hom(nzb,1,98,sr) ! r_s
[1551]	2177	ENDIF
	2178	!
	2179	!-- Collect radiation model timeseries
	2180	IF ( radiation ) THEN
[2270]	2181	ts_value(dots_rad,sr) = hom(nzb,1,99,sr) ! rad_net
	2182	ts_value(dots_rad+1,sr) = hom(nzb,1,100,sr) ! rad_lw_in
	2183	ts_value(dots_rad+2,sr) = hom(nzb,1,101,sr) ! rad_lw_out
	2184	ts_value(dots_rad+3,sr) = hom(nzb,1,102,sr) ! rad_sw_in
	2185	ts_value(dots_rad+4,sr) = hom(nzb,1,103,sr) ! rad_sw_out
[1585]	2186
	2187	IF ( radiation_scheme == 'rrtmg' ) THEN
[2270]	2188	ts_value(dots_rad+5,sr) = hom(nzb,1,108,sr) ! rrtm_aldif
	2189	ts_value(dots_rad+6,sr) = hom(nzb,1,109,sr) ! rrtm_aldir
	2190	ts_value(dots_rad+7,sr) = hom(nzb,1,110,sr) ! rrtm_asdif
	2191	ts_value(dots_rad+8,sr) = hom(nzb,1,111,sr) ! rrtm_asdir
[1585]	2192	ENDIF
	2193
[1551]	2194	ENDIF
	2195
	2196	!
[3637]	2197	!-- Calculate additional statistics provided by other modules
	2198	CALL module_interface_statistics( 'time_series', sr, 0, dots_max )
[2817]	2199
[48]	2200	ENDDO ! loop of the subregions
	2201
[1]	2202	!
[1918]	2203	!-- If required, sum up horizontal averages for subsequent time averaging.
	2204	!-- Do not sum, if flow statistics is called before the first initial time step.
	2205	IF ( do_sum .AND. simulated_time /= 0.0_wp ) THEN
[1353]	2206	IF ( average_count_pr == 0 ) hom_sum = 0.0_wp
[1]	2207	hom_sum = hom_sum + hom(:,1,:,:)
	2208	average_count_pr = average_count_pr + 1
	2209	do_sum = .FALSE.
	2210	ENDIF
	2211
	2212	!
	2213	!-- Set flag for other UPs (e.g. output routines, but also buoyancy).
	2214	!-- This flag is reset after each time step in time_integration.
	2215	flow_statistics_called = .TRUE.
	2216
	2217	CALL cpu_log( log_point(10), 'flow_statistics', 'stop' )
	2218
	2219
	2220	END SUBROUTINE flow_statistics

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |