Home

Context Navigation

source: palm/trunk/SOURCE/flow_statistics.f90 @ 3003

Last change on this file since 3003 was 3003, checked in by Giersch, 6 years ago
Bugfix: W* and Z_I in the first line of the run control file of restarts correspond now to the values in the last run control output line of the previous run
Property svn:keywords set to `Id`
File size: 104.4 KB

Rev	Line
[1682]	1	!> @file flow_statistics.f90
[2000]	2	!------------------------------------------------------------------------------!
[2696]	3	! This file is part of the PALM model system.
[1036]	4	!
[2000]	5	! PALM is free software: you can redistribute it and/or modify it under the
	6	! terms of the GNU General Public License as published by the Free Software
	7	! Foundation, either version 3 of the License, or (at your option) any later
	8	! version.
[1036]	9	!
	10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
	11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
	12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
	13	!
	14	! You should have received a copy of the GNU General Public License along with
	15	! PALM. If not, see <http://www.gnu.org/licenses/>.
	16	!
[2718]	17	! Copyright 1997-2018 Leibniz Universitaet Hannover
[2000]	18	!------------------------------------------------------------------------------!
[1036]	19	!
[254]	20	! Current revisions:
[1]	21	! -----------------
[1961]	22	!
[2233]	23	!
[1739]	24	! Former revisions:
	25	! -----------------
	26	! $Id: flow_statistics.f90 3003 2018-04-23 10:22:58Z Giersch $
[3003]	27	! The inversion height will not be calcuated before the first timestep in
	28	! case of restarts.
	29	!
	30	! 2968 2018-04-13 11:52:24Z suehring
[2968]	31	! Bugfix in output of timeseries quantities in case of elevated model surfaces.
	32	!
	33	! 2817 2018-02-19 16:32:21Z knoop
[2817]	34	! Preliminary gust module interface implemented
	35	!
	36	! 2773 2018-01-30 14:12:54Z suehring
[2773]	37	! Timeseries output of surface temperature.
	38	!
	39	! 2753 2018-01-16 14:16:49Z suehring
[2753]	40	! Tile approach for spectral albedo implemented.
	41	!
	42	! 2718 2018-01-02 08:49:38Z maronga
[2716]	43	! Corrected "Former revisions" section
	44	!
	45	! 2696 2017-12-14 17:12:51Z kanani
	46	! Change in file header (GPL part)
[2696]	47	! Bugfix in evaluation of surface quantities in case different surface types
	48	! are used (MS)
	49	!
	50	! 2674 2017-12-07 11:49:21Z suehring
[2674]	51	! Bugfix in output conversion of resolved-scale momentum fluxes in case of
	52	! PW advections scheme.
	53	!
	54	! 2320 2017-07-21 12:47:43Z suehring
[2320]	55	! Modularize large-scale forcing and nudging
	56	!
	57	! 2296 2017-06-28 07:53:56Z maronga
[2296]	58	! Enabled output of radiation quantities for radiation_scheme = 'constant'
	59	!
	60	! 2292 2017-06-20 09:51:42Z schwenkel
[2292]	61	! Implementation of new microphysic scheme: cloud_scheme = 'morrison'
	62	! includes two more prognostic equations for cloud drop concentration (nc)
	63	! and cloud water content (qc).
	64	!
	65	! 2270 2017-06-09 12:18:47Z maronga
[2270]	66	! Revised numbering (removed 2 timeseries)
	67	!
	68	! 2252 2017-06-07 09:35:37Z knoop
[2252]	69	! perturbation pressure now depending on flux_output_mode
	70	!
	71	! 2233 2017-05-30 18:08:54Z suehring
[1739]	72	!
[2233]	73	! 2232 2017-05-30 17:47:52Z suehring
	74	! Adjustments to new topography and surface concept
	75	!
[2119]	76	! 2118 2017-01-17 16:38:49Z raasch
	77	! OpenACC version of subroutine removed
	78	!
[2074]	79	! 2073 2016-11-30 14:34:05Z raasch
	80	! openmp bugfix: large scale forcing calculations cannot be executed thread
	81	! parallel
	82	!
[2038]	83	! 2037 2016-10-26 11:15:40Z knoop
	84	! Anelastic approximation implemented
	85	!
[2032]	86	! 2031 2016-10-21 15:11:58Z knoop
	87	! renamed variable rho to rho_ocean
	88	!
[2027]	89	! 2026 2016-10-18 10:27:02Z suehring
	90	! Bugfix, enable output of s*2.
	91	! Change, calculation of domain-averaged perturbation energy.
	92	! Some formatting adjustments.
	93	!
[2001]	94	! 2000 2016-08-20 18:09:15Z knoop
	95	! Forced header and separation lines into 80 columns
	96	!
[1977]	97	! 1976 2016-07-27 13:28:04Z maronga
	98	! Removed some unneeded __rrtmg preprocessor directives
	99	!
[1961]	100	! 1960 2016-07-12 16:34:24Z suehring
	101	! Separate humidity and passive scalar
	102	!
[1919]	103	! 1918 2016-05-27 14:35:57Z raasch
	104	! in case of Wicker-Skamarock scheme, calculate disturbance kinetic energy here,
	105	! if flow_statistics is called before the first initial time step
	106	!
[1854]	107	! 1853 2016-04-11 09:00:35Z maronga
	108	! Adjusted for use with radiation_scheme = constant
	109	!
[1851]	110	! 1849 2016-04-08 11:33:18Z hoffmann
	111	! prr moved to arrays_3d
	112	!
[1823]	113	! 1822 2016-04-07 07:49:42Z hoffmann
	114	! Output of bulk microphysics simplified.
	115	!
[1816]	116	! 1815 2016-04-06 13:49:59Z raasch
	117	! cpp-directives for intel openmp bug removed
	118	!
[1784]	119	! 1783 2016-03-06 18:36:17Z raasch
	120	! +module netcdf_interface
	121	!
[1748]	122	! 1747 2016-02-08 12:25:53Z raasch
	123	! small bugfixes for accelerator version
	124	!
[1739]	125	! 1738 2015-12-18 13:56:05Z raasch
[1738]	126	! bugfixes for calculations in statistical regions which do not contain grid
	127	! points in the lowest vertical levels, mean surface level height considered
	128	! in the calculation of the characteristic vertical velocity,
	129	! old upstream parts removed
[1383]	130	!
[1710]	131	! 1709 2015-11-04 14:47:01Z maronga
	132	! Updated output of Obukhov length
	133	!
[1692]	134	! 1691 2015-10-26 16:17:44Z maronga
	135	! Revised calculation of Obukhov length. Added output of radiative heating >
	136	! rates for RRTMG.
	137	!
[1683]	138	! 1682 2015-10-07 23:56:08Z knoop
	139	! Code annotations made doxygen readable
	140	!
[1659]	141	! 1658 2015-09-18 10:52:53Z raasch
	142	! bugfix: temporary reduction variables in the openacc branch are now
	143	! initialized to zero
	144	!
[1655]	145	! 1654 2015-09-17 09:20:17Z raasch
	146	! FORTRAN bugfix of r1652
	147	!
[1653]	148	! 1652 2015-09-17 08:12:24Z raasch
	149	! bugfix in calculation of energy production by turbulent transport of TKE
	150	!
[1594]	151	! 1593 2015-05-16 13:58:02Z raasch
	152	! FORTRAN errors removed from openacc branch
	153	!
[1586]	154	! 1585 2015-04-30 07:05:52Z maronga
	155	! Added output of timeseries and profiles for RRTMG
	156	!
[1572]	157	! 1571 2015-03-12 16:12:49Z maronga
	158	! Bugfix: output of rad_net and rad_sw_in
	159	!
[1568]	160	! 1567 2015-03-10 17:57:55Z suehring
	161	! Reverse modifications made for monotonic limiter.
	162	!
[1558]	163	! 1557 2015-03-05 16:43:04Z suehring
	164	! Adjustments for monotonic limiter
	165	!
[1556]	166	! 1555 2015-03-04 17:44:27Z maronga
	167	! Added output of r_a and r_s.
	168	!
[1552]	169	! 1551 2015-03-03 14:18:16Z maronga
	170	! Added suppport for land surface model and radiation model output.
	171	!
[1499]	172	! 1498 2014-12-03 14:09:51Z suehring
	173	! Comments added
	174	!
[1483]	175	! 1482 2014-10-18 12:34:45Z raasch
	176	! missing ngp_sums_ls added in accelerator version
	177	!
[1451]	178	! 1450 2014-08-21 07:31:51Z heinze
	179	! bugfix: calculate fac only for simulated_time >= 0.0
	180	!
[1397]	181	! 1396 2014-05-06 13:37:41Z raasch
	182	! bugfix: "copyin" replaced by "update device" in openacc-branch
	183	!
[1387]	184	! 1386 2014-05-05 13:55:30Z boeske
	185	! bugfix: simulated time before the last timestep is needed for the correct
	186	! calculation of the profiles of large scale forcing tendencies
	187	!
[1383]	188	! 1382 2014-04-30 12:15:41Z boeske
[1382]	189	! Renamed variables which store large scale forcing tendencies
	190	! pt_lsa -> td_lsa_lpt, pt_subs -> td_sub_lpt,
	191	! q_lsa -> td_lsa_q, q_subs -> td_sub_q,
	192	! added Neumann boundary conditions for profile data output of large scale
	193	! advection and subsidence terms at nzt+1
[1354]	194	!
[1375]	195	! 1374 2014-04-25 12:55:07Z raasch
	196	! bugfix: syntax errors removed from openacc-branch
	197	! missing variables added to ONLY-lists
	198	!
[1366]	199	! 1365 2014-04-22 15:03:56Z boeske
	200	! Output of large scale advection, large scale subsidence and nudging tendencies
	201	! +sums_ls_l, ngp_sums_ls, use_subsidence_tendencies
	202	!
[1354]	203	! 1353 2014-04-08 15:21:23Z heinze
	204	! REAL constants provided with KIND-attribute
	205	!
[1323]	206	! 1322 2014-03-20 16:38:49Z raasch
	207	! REAL constants defined as wp-kind
	208	!
[1321]	209	! 1320 2014-03-20 08:40:49Z raasch
[1320]	210	! ONLY-attribute added to USE-statements,
	211	! kind-parameters added to all INTEGER and REAL declaration statements,
	212	! kinds are defined in new module kinds,
	213	! revision history before 2012 removed,
	214	! comment fields (!:) to be used for variable explanations added to
	215	! all variable declaration statements
[1008]	216	!
[1300]	217	! 1299 2014-03-06 13:15:21Z heinze
	218	! Output of large scale vertical velocity w_subs
	219	!
[1258]	220	! 1257 2013-11-08 15:18:40Z raasch
	221	! openacc "end parallel" replaced by "end parallel loop"
	222	!
[1242]	223	! 1241 2013-10-30 11:36:58Z heinze
	224	! Output of ug and vg
	225	!
[1222]	226	! 1221 2013-09-10 08:59:13Z raasch
	227	! ported for openACC in separate #else branch
	228	!
[1182]	229	! 1179 2013-06-14 05:57:58Z raasch
	230	! comment for profile 77 added
	231	!
[1116]	232	! 1115 2013-03-26 18:16:16Z hoffmann
	233	! ql is calculated by calc_liquid_water_content
	234	!
[1112]	235	! 1111 2013-03-08 23:54:10Z raasch
	236	! openACC directive added
	237	!
[1054]	238	! 1053 2012-11-13 17:11:03Z hoffmann
[1112]	239	! additions for two-moment cloud physics scheme:
[1054]	240	! +nr, qr, qc, prr
	241	!
[1037]	242	! 1036 2012-10-22 13:43:42Z raasch
	243	! code put under GPL (PALM 3.9)
	244	!
[1008]	245	! 1007 2012-09-19 14:30:36Z franke
[1007]	246	! Calculation of buoyancy flux for humidity in case of WS-scheme is now using
	247	! turbulent fluxes of WS-scheme
	248	! Bugfix: Calculation of subgridscale buoyancy flux for humidity and cloud
	249	! droplets at nzb and nzt added
[700]	250	!
[802]	251	! 801 2012-01-10 17:30:36Z suehring
	252	! Calculation of turbulent fluxes in advec_ws is now thread-safe.
	253	!
[1]	254	! Revision 1.1 1997/08/11 06:15:17 raasch
	255	! Initial revision
	256	!
	257	!
	258	! Description:
	259	! ------------
[1682]	260	!> Compute average profiles and further average flow quantities for the different
	261	!> user-defined (sub-)regions. The region indexed 0 is the total model domain.
	262	!>
	263	!> @note For simplicity, nzb_s_inner and nzb_diff_s_inner are being used as a
	264	!> lower vertical index for k-loops for all variables, although strictly
	265	!> speaking the k-loops would have to be split up according to the staggered
	266	!> grid. However, this implies no error since staggered velocity components
	267	!> are zero at the walls and inside buildings.
[1]	268	!------------------------------------------------------------------------------!
[1682]	269	SUBROUTINE flow_statistics
	270
[1]	271
[1320]	272	USE arrays_3d, &
[2037]	273	ONLY: ddzu, ddzw, e, heatflux_output_conversion, hyp, km, kh, &
[2292]	274	momentumflux_output_conversion, nc, nr, p, prho, prr, pt, q, &
[2232]	275	qc, ql, qr, rho_air, rho_air_zw, rho_ocean, s, &
[2320]	276	sa, u, ug, v, vg, vpt, w, w_subs, waterflux_output_conversion, zw
[1320]	277
	278	USE cloud_parameters, &
[1849]	279	ONLY: l_d_cp, pt_d_t
[1320]	280
	281	USE control_parameters, &
[1551]	282	ONLY: average_count_pr, cloud_droplets, cloud_physics, do_sum, &
[3003]	283	dt_3d, g, humidity, initializing_actions, kappa, land_surface, &
	284	large_scale_forcing, large_scale_subsidence, max_pr_user, &
	285	message_string, neutral, microphysics_morrison, &
	286	microphysics_seifert, ocean, passive_scalar, simulated_time, &
	287	simulated_time_at_begin, use_subsidence_tendencies, &
[2292]	288	use_surface_fluxes, use_top_fluxes, ws_scheme_mom, &
	289	ws_scheme_sca
[1320]	290
	291	USE cpulog, &
[1551]	292	ONLY: cpu_log, log_point
[1320]	293
	294	USE grid_variables, &
[1551]	295	ONLY: ddx, ddy
[2817]	296
	297	USE gust_mod, &
	298	ONLY: gust_module_enabled, gust_statistics
[1320]	299
	300	USE indices, &
[1551]	301	ONLY: ngp_2dh, ngp_2dh_s_inner, ngp_3d, ngp_3d_inner, ngp_sums, &
[2968]	302	ngp_sums_ls, nxl, nxr, nyn, nys, nzb, nzt, topo_min_level, &
	303	wall_flags_0
[1320]	304
	305	USE kinds
	306
[1551]	307	USE land_surface_model_mod, &
[2232]	308	ONLY: m_soil_h, nzb_soil, nzt_soil, t_soil_h
[1551]	309
[2320]	310	USE lsf_nudging_mod, &
	311	ONLY: td_lsa_lpt, td_lsa_q, td_sub_lpt, td_sub_q, time_vert
	312
[1783]	313	USE netcdf_interface, &
[2817]	314	ONLY: dots_rad, dots_soil, dots_max
[1783]	315
[1]	316	USE pegrid
[1551]	317
	318	USE radiation_model_mod, &
[2696]	319	ONLY: radiation, radiation_scheme, &
[1691]	320	rad_lw_in, rad_lw_out, rad_lw_cs_hr, rad_lw_hr, &
	321	rad_sw_in, rad_sw_out, rad_sw_cs_hr, rad_sw_hr
[1585]	322
	323	#if defined ( __rrtmg )
	324	USE radiation_model_mod, &
	325	ONLY: rrtm_aldif, rrtm_aldir, rrtm_asdif, rrtm_asdir
	326	#endif
	327
[1]	328	USE statistics
	329
[2232]	330	USE surface_mod, &
	331	ONLY : surf_def_h, surf_lsm_h, surf_usm_h
[1691]	332
[2232]	333
[1]	334	IMPLICIT NONE
	335
[1682]	336	INTEGER(iwp) :: i !<
	337	INTEGER(iwp) :: j !<
	338	INTEGER(iwp) :: k !<
[2232]	339	INTEGER(iwp) :: ki !<
[1738]	340	INTEGER(iwp) :: k_surface_level !<
[2232]	341	INTEGER(iwp) :: m !< loop variable over all horizontal wall elements
	342	INTEGER(iwp) :: l !< loop variable over surface facing -- up- or downward-facing
[1682]	343	INTEGER(iwp) :: nt !<
	344	INTEGER(iwp) :: omp_get_thread_num !<
	345	INTEGER(iwp) :: sr !<
	346	INTEGER(iwp) :: tn !<
[2232]	347
[1682]	348	LOGICAL :: first !<
[1320]	349
[1682]	350	REAL(wp) :: dptdz_threshold !<
	351	REAL(wp) :: fac !<
[2232]	352	REAL(wp) :: flag !<
[1682]	353	REAL(wp) :: height !<
	354	REAL(wp) :: pts !<
	355	REAL(wp) :: sums_l_eper !<
	356	REAL(wp) :: sums_l_etot !<
	357	REAL(wp) :: ust !<
	358	REAL(wp) :: ust2 !<
	359	REAL(wp) :: u2 !<
	360	REAL(wp) :: vst !<
	361	REAL(wp) :: vst2 !<
	362	REAL(wp) :: v2 !<
	363	REAL(wp) :: w2 !<
[1320]	364
[1682]	365	REAL(wp) :: dptdz(nzb+1:nzt+1) !<
	366	REAL(wp) :: sums_ll(nzb:nzt+1,2) !<
[1]	367
	368	CALL cpu_log( log_point(10), 'flow_statistics', 'start' )
	369
[1221]	370
[1]	371	!
	372	!-- To be on the safe side, check whether flow_statistics has already been
	373	!-- called once after the current time step
	374	IF ( flow_statistics_called ) THEN
[254]	375
[274]	376	message_string = 'flow_statistics is called two times within one ' // &
	377	'timestep'
[254]	378	CALL message( 'flow_statistics', 'PA0190', 1, 2, 0, 6, 0 )
[1007]	379
[1]	380	ENDIF
	381
	382	!
	383	!-- Compute statistics for each (sub-)region
	384	DO sr = 0, statistic_regions
	385
	386	!
	387	!-- Initialize (local) summation array
[1353]	388	sums_l = 0.0_wp
[1]	389
	390	!
	391	!-- Store sums that have been computed in other subroutines in summation
	392	!-- array
	393	sums_l(:,11,:) = sums_l_l(:,sr,:) ! mixing length from diffusivities
	394	!-- WARNING: next line still has to be adjusted for OpenMP
[2037]	395	sums_l(:,21,0) = sums_wsts_bc_l(:,sr) * &
	396	heatflux_output_conversion ! heat flux from advec_s_bc
[87]	397	sums_l(nzb+9,pr_palm,0) = sums_divold_l(sr) ! old divergence from pres
	398	sums_l(nzb+10,pr_palm,0) = sums_divnew_l(sr) ! new divergence from pres
[1]	399
[667]	400	!
[1498]	401	!-- When calcuating horizontally-averaged total (resolved- plus subgrid-
	402	!-- scale) vertical fluxes and velocity variances by using commonly-
	403	!-- applied Reynolds-based methods ( e.g. <w'pt'> = (w-<w>)*(pt-<pt>) )
	404	!-- in combination with the 5th order advection scheme, pronounced
	405	!-- artificial kinks could be observed in the vertical profiles near the
	406	!-- surface. Please note: these kinks were not related to the model truth,
	407	!-- i.e. these kinks are just related to an evaluation problem.
	408	!-- In order avoid these kinks, vertical fluxes and horizontal as well
	409	!-- vertical velocity variances are calculated directly within the advection
	410	!-- routines, according to the numerical discretization, to evaluate the
	411	!-- statistical quantities as they will appear within the prognostic
	412	!-- equations.
[667]	413	!-- Copy the turbulent quantities, evaluated in the advection routines to
[1498]	414	!-- the local array sums_l() for further computations.
[743]	415	IF ( ws_scheme_mom .AND. sr == 0 ) THEN
[696]	416
[1007]	417	!
[673]	418	!-- According to the Neumann bc for the horizontal velocity components,
	419	!-- the corresponding fluxes has to satisfiy the same bc.
	420	IF ( ocean ) THEN
[801]	421	sums_us2_ws_l(nzt+1,:) = sums_us2_ws_l(nzt,:)
[1007]	422	sums_vs2_ws_l(nzt+1,:) = sums_vs2_ws_l(nzt,:)
[673]	423	ENDIF
[696]	424
	425	DO i = 0, threads_per_task-1
[1007]	426	!
[696]	427	!-- Swap the turbulent quantities evaluated in advec_ws.
[2037]	428	sums_l(:,13,i) = sums_wsus_ws_l(:,i) &
	429	* momentumflux_output_conversion ! wu
	430	sums_l(:,15,i) = sums_wsvs_ws_l(:,i) &
	431	* momentumflux_output_conversion ! wv
[801]	432	sums_l(:,30,i) = sums_us2_ws_l(:,i) ! u*2
	433	sums_l(:,31,i) = sums_vs2_ws_l(:,i) ! v*2
	434	sums_l(:,32,i) = sums_ws2_ws_l(:,i) ! w*2
[1353]	435	sums_l(:,34,i) = sums_l(:,34,i) + 0.5_wp * &
[1320]	436	( sums_us2_ws_l(:,i) + sums_vs2_ws_l(:,i) + &
[801]	437	sums_ws2_ws_l(:,i) ) ! e*
[667]	438	ENDDO
[696]	439
[667]	440	ENDIF
[696]	441
[1567]	442	IF ( ws_scheme_sca .AND. sr == 0 ) THEN
[696]	443
	444	DO i = 0, threads_per_task-1
[2037]	445	sums_l(:,17,i) = sums_wspts_ws_l(:,i) &
	446	* heatflux_output_conversion ! wpt
[1960]	447	IF ( ocean ) sums_l(:,66,i) = sums_wssas_ws_l(:,i) ! wsa
[2037]	448	IF ( humidity ) sums_l(:,49,i) = sums_wsqs_ws_l(:,i) &
	449	* waterflux_output_conversion ! wq
[2270]	450	IF ( passive_scalar ) sums_l(:,114,i) = sums_wsss_ws_l(:,i) ! ws
[696]	451	ENDDO
	452
[667]	453	ENDIF
[305]	454	!
[1]	455	!-- Horizontally averaged profiles of horizontal velocities and temperature.
	456	!-- They must have been computed before, because they are already required
	457	!-- for other horizontal averages.
	458	tn = 0
[2232]	459	!$OMP PARALLEL PRIVATE( i, j, k, tn, flag )
	460	!$ tn = omp_get_thread_num()
[1]	461	!$OMP DO
	462	DO i = nxl, nxr
	463	DO j = nys, nyn
[2232]	464	DO k = nzb, nzt+1
	465	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_0(k,j,i), 22 ) )
	466	sums_l(k,1,tn) = sums_l(k,1,tn) + u(k,j,i) * rmask(j,i,sr) &
	467	* flag
	468	sums_l(k,2,tn) = sums_l(k,2,tn) + v(k,j,i) * rmask(j,i,sr) &
	469	* flag
	470	sums_l(k,4,tn) = sums_l(k,4,tn) + pt(k,j,i) * rmask(j,i,sr) &
	471	* flag
[1]	472	ENDDO
	473	ENDDO
	474	ENDDO
	475
	476	!
[96]	477	!-- Horizontally averaged profile of salinity
	478	IF ( ocean ) THEN
	479	!$OMP DO
	480	DO i = nxl, nxr
	481	DO j = nys, nyn
[2232]	482	DO k = nzb, nzt+1
	483	sums_l(k,23,tn) = sums_l(k,23,tn) + sa(k,j,i) &
	484	* rmask(j,i,sr) &
	485	* MERGE( 1.0_wp, 0.0_wp, &
	486	BTEST( wall_flags_0(k,j,i), 22 ) )
[96]	487	ENDDO
	488	ENDDO
	489	ENDDO
	490	ENDIF
	491
	492	!
[1]	493	!-- Horizontally averaged profiles of virtual potential temperature,
	494	!-- total water content, specific humidity and liquid water potential
	495	!-- temperature
[75]	496	IF ( humidity ) THEN
[1]	497	!$OMP DO
	498	DO i = nxl, nxr
	499	DO j = nys, nyn
[2232]	500	DO k = nzb, nzt+1
	501	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_0(k,j,i), 22 ) )
	502	sums_l(k,44,tn) = sums_l(k,44,tn) + &
	503	vpt(k,j,i) * rmask(j,i,sr) * flag
	504	sums_l(k,41,tn) = sums_l(k,41,tn) + &
	505	q(k,j,i) * rmask(j,i,sr) * flag
[1]	506	ENDDO
	507	ENDDO
	508	ENDDO
	509	IF ( cloud_physics ) THEN
	510	!$OMP DO
	511	DO i = nxl, nxr
	512	DO j = nys, nyn
[2232]	513	DO k = nzb, nzt+1
	514	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_0(k,j,i), 22 ) )
	515	sums_l(k,42,tn) = sums_l(k,42,tn) + &
	516	( q(k,j,i) - ql(k,j,i) ) * rmask(j,i,sr) &
	517	* flag
	518	sums_l(k,43,tn) = sums_l(k,43,tn) + ( &
[1]	519	pt(k,j,i) + l_d_cppt_d_t(k) ql(k,j,i) &
[2232]	520	) * rmask(j,i,sr) &
	521	* flag
[1]	522	ENDDO
	523	ENDDO
	524	ENDDO
	525	ENDIF
	526	ENDIF
	527
	528	!
	529	!-- Horizontally averaged profiles of passive scalar
	530	IF ( passive_scalar ) THEN
	531	!$OMP DO
	532	DO i = nxl, nxr
	533	DO j = nys, nyn
[2232]	534	DO k = nzb, nzt+1
[2270]	535	sums_l(k,115,tn) = sums_l(k,115,tn) + s(k,j,i) &
[2232]	536	* rmask(j,i,sr) &
	537	* MERGE( 1.0_wp, 0.0_wp, &
	538	BTEST( wall_flags_0(k,j,i), 22 ) )
[1]	539	ENDDO
	540	ENDDO
	541	ENDDO
	542	ENDIF
	543	!$OMP END PARALLEL
	544	!
	545	!-- Summation of thread sums
	546	IF ( threads_per_task > 1 ) THEN
	547	DO i = 1, threads_per_task-1
	548	sums_l(:,1,0) = sums_l(:,1,0) + sums_l(:,1,i)
	549	sums_l(:,2,0) = sums_l(:,2,0) + sums_l(:,2,i)
	550	sums_l(:,4,0) = sums_l(:,4,0) + sums_l(:,4,i)
[96]	551	IF ( ocean ) THEN
	552	sums_l(:,23,0) = sums_l(:,23,0) + sums_l(:,23,i)
	553	ENDIF
[75]	554	IF ( humidity ) THEN
[1]	555	sums_l(:,41,0) = sums_l(:,41,0) + sums_l(:,41,i)
	556	sums_l(:,44,0) = sums_l(:,44,0) + sums_l(:,44,i)
	557	IF ( cloud_physics ) THEN
	558	sums_l(:,42,0) = sums_l(:,42,0) + sums_l(:,42,i)
	559	sums_l(:,43,0) = sums_l(:,43,0) + sums_l(:,43,i)
	560	ENDIF
	561	ENDIF
	562	IF ( passive_scalar ) THEN
[2270]	563	sums_l(:,115,0) = sums_l(:,115,0) + sums_l(:,115,i)
[1]	564	ENDIF
	565	ENDDO
	566	ENDIF
	567
	568	#if defined( __parallel )
	569	!
	570	!-- Compute total sum from local sums
[622]	571	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[1320]	572	CALL MPI_ALLREDUCE( sums_l(nzb,1,0), sums(nzb,1), nzt+2-nzb, MPI_REAL, &
[1]	573	MPI_SUM, comm2d, ierr )
[622]	574	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[1320]	575	CALL MPI_ALLREDUCE( sums_l(nzb,2,0), sums(nzb,2), nzt+2-nzb, MPI_REAL, &
[1]	576	MPI_SUM, comm2d, ierr )
[622]	577	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[1320]	578	CALL MPI_ALLREDUCE( sums_l(nzb,4,0), sums(nzb,4), nzt+2-nzb, MPI_REAL, &
[1]	579	MPI_SUM, comm2d, ierr )
[96]	580	IF ( ocean ) THEN
[622]	581	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[1320]	582	CALL MPI_ALLREDUCE( sums_l(nzb,23,0), sums(nzb,23), nzt+2-nzb, &
[96]	583	MPI_REAL, MPI_SUM, comm2d, ierr )
	584	ENDIF
[75]	585	IF ( humidity ) THEN
[622]	586	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[1320]	587	CALL MPI_ALLREDUCE( sums_l(nzb,44,0), sums(nzb,44), nzt+2-nzb, &
[1]	588	MPI_REAL, MPI_SUM, comm2d, ierr )
[622]	589	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[1320]	590	CALL MPI_ALLREDUCE( sums_l(nzb,41,0), sums(nzb,41), nzt+2-nzb, &
[1]	591	MPI_REAL, MPI_SUM, comm2d, ierr )
	592	IF ( cloud_physics ) THEN
[622]	593	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[1320]	594	CALL MPI_ALLREDUCE( sums_l(nzb,42,0), sums(nzb,42), nzt+2-nzb, &
[1]	595	MPI_REAL, MPI_SUM, comm2d, ierr )
[622]	596	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[1320]	597	CALL MPI_ALLREDUCE( sums_l(nzb,43,0), sums(nzb,43), nzt+2-nzb, &
[1]	598	MPI_REAL, MPI_SUM, comm2d, ierr )
	599	ENDIF
	600	ENDIF
	601
	602	IF ( passive_scalar ) THEN
[622]	603	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[2270]	604	CALL MPI_ALLREDUCE( sums_l(nzb,115,0), sums(nzb,115), nzt+2-nzb, &
[1]	605	MPI_REAL, MPI_SUM, comm2d, ierr )
	606	ENDIF
	607	#else
	608	sums(:,1) = sums_l(:,1,0)
	609	sums(:,2) = sums_l(:,2,0)
	610	sums(:,4) = sums_l(:,4,0)
[96]	611	IF ( ocean ) sums(:,23) = sums_l(:,23,0)
[75]	612	IF ( humidity ) THEN
[1]	613	sums(:,44) = sums_l(:,44,0)
	614	sums(:,41) = sums_l(:,41,0)
	615	IF ( cloud_physics ) THEN
	616	sums(:,42) = sums_l(:,42,0)
	617	sums(:,43) = sums_l(:,43,0)
	618	ENDIF
	619	ENDIF
[2270]	620	IF ( passive_scalar ) sums(:,115) = sums_l(:,115,0)
[1]	621	#endif
	622
	623	!
	624	!-- Final values are obtained by division by the total number of grid points
	625	!-- used for summation. After that store profiles.
[132]	626	sums(:,1) = sums(:,1) / ngp_2dh(sr)
	627	sums(:,2) = sums(:,2) / ngp_2dh(sr)
	628	sums(:,4) = sums(:,4) / ngp_2dh_s_inner(:,sr)
[1]	629	hom(:,1,1,sr) = sums(:,1) ! u
	630	hom(:,1,2,sr) = sums(:,2) ! v
	631	hom(:,1,4,sr) = sums(:,4) ! pt
	632
[667]	633
[1]	634	!
[96]	635	!-- Salinity
	636	IF ( ocean ) THEN
[132]	637	sums(:,23) = sums(:,23) / ngp_2dh_s_inner(:,sr)
[96]	638	hom(:,1,23,sr) = sums(:,23) ! sa
	639	ENDIF
	640
	641	!
[1]	642	!-- Humidity and cloud parameters
[75]	643	IF ( humidity ) THEN
[132]	644	sums(:,44) = sums(:,44) / ngp_2dh_s_inner(:,sr)
	645	sums(:,41) = sums(:,41) / ngp_2dh_s_inner(:,sr)
[1]	646	hom(:,1,44,sr) = sums(:,44) ! vpt
	647	hom(:,1,41,sr) = sums(:,41) ! qv (q)
	648	IF ( cloud_physics ) THEN
[132]	649	sums(:,42) = sums(:,42) / ngp_2dh_s_inner(:,sr)
	650	sums(:,43) = sums(:,43) / ngp_2dh_s_inner(:,sr)
[1]	651	hom(:,1,42,sr) = sums(:,42) ! qv
	652	hom(:,1,43,sr) = sums(:,43) ! pt
	653	ENDIF
	654	ENDIF
	655
	656	!
	657	!-- Passive scalar
[2270]	658	IF ( passive_scalar ) hom(:,1,115,sr) = sums(:,115) / &
[1960]	659	ngp_2dh_s_inner(:,sr) ! s
[1]	660
	661	!
	662	!-- Horizontally averaged profiles of the remaining prognostic variables,
	663	!-- variances, the total and the perturbation energy (single values in last
	664	!-- column of sums_l) and some diagnostic quantities.
[132]	665	!-- NOTE: for simplicity, nzb_s_inner is used below, although strictly
[1]	666	!-- ---- speaking the following k-loop would have to be split up and
	667	!-- rearranged according to the staggered grid.
[132]	668	!-- However, this implies no error since staggered velocity components
	669	!-- are zero at the walls and inside buildings.
[1]	670	tn = 0
[1815]	671	!$OMP PARALLEL PRIVATE( i, j, k, pts, sums_ll, sums_l_eper, &
	672	!$OMP sums_l_etot, tn, ust, ust2, u2, vst, vst2, v2, &
[2232]	673	!$OMP w2, flag, m, ki, l )
	674	!$ tn = omp_get_thread_num()
[1]	675	!$OMP DO
	676	DO i = nxl, nxr
	677	DO j = nys, nyn
[1353]	678	sums_l_etot = 0.0_wp
[2232]	679	DO k = nzb, nzt+1
	680	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_0(k,j,i), 22 ) )
[1]	681	!
	682	!-- Prognostic and diagnostic variables
[2232]	683	sums_l(k,3,tn) = sums_l(k,3,tn) + w(k,j,i) * rmask(j,i,sr) &
	684	* flag
	685	sums_l(k,8,tn) = sums_l(k,8,tn) + e(k,j,i) * rmask(j,i,sr) &
	686	* flag
	687	sums_l(k,9,tn) = sums_l(k,9,tn) + km(k,j,i) * rmask(j,i,sr) &
	688	* flag
	689	sums_l(k,10,tn) = sums_l(k,10,tn) + kh(k,j,i) * rmask(j,i,sr) &
	690	* flag
[2252]	691	sums_l(k,40,tn) = sums_l(k,40,tn) + ( p(k,j,i) &
	692	/ momentumflux_output_conversion(k) ) &
	693	* flag
[1]	694
	695	sums_l(k,33,tn) = sums_l(k,33,tn) + &
[2232]	696	( pt(k,j,i)-hom(k,1,4,sr) )*2 rmask(j,i,sr)&
	697	* flag
[624]	698
	699	IF ( humidity ) THEN
	700	sums_l(k,70,tn) = sums_l(k,70,tn) + &
[2232]	701	( q(k,j,i)-hom(k,1,41,sr) )*2 rmask(j,i,sr)&
	702	* flag
[624]	703	ENDIF
[1960]	704	IF ( passive_scalar ) THEN
[2270]	705	sums_l(k,116,tn) = sums_l(k,116,tn) + &
	706	( s(k,j,i)-hom(k,1,115,sr) )*2 rmask(j,i,sr)&
[2232]	707	* flag
[1960]	708	ENDIF
[699]	709	!
	710	!-- Higher moments
	711	!-- (Computation of the skewness of w further below)
[2232]	712	sums_l(k,38,tn) = sums_l(k,38,tn) + w(k,j,i)*3 rmask(j,i,sr) &
	713	* flag
[667]	714
[1]	715	sums_l_etot = sums_l_etot + &
[2232]	716	0.5_wp * ( u(k,j,i)2 + v(k,j,i)2 + &
	717	w(k,j,i)*2 ) rmask(j,i,sr)&
	718	* flag
[1]	719	ENDDO
	720	!
	721	!-- Total and perturbation energy for the total domain (being
	722	!-- collected in the last column of sums_l). Summation of these
	723	!-- quantities is seperated from the previous loop in order to
	724	!-- allow vectorization of that loop.
[87]	725	sums_l(nzb+4,pr_palm,tn) = sums_l(nzb+4,pr_palm,tn) + sums_l_etot
[1]	726	!
	727	!-- 2D-arrays (being collected in the last column of sums_l)
[2773]	728	IF ( surf_def_h(0)%end_index(j,i) >= &
[2696]	729	surf_def_h(0)%start_index(j,i) ) THEN
[2232]	730	m = surf_def_h(0)%start_index(j,i)
[2773]	731	sums_l(nzb,pr_palm,tn) = sums_l(nzb,pr_palm,tn) + &
[2232]	732	surf_def_h(0)%us(m) * rmask(j,i,sr)
[2773]	733	sums_l(nzb+1,pr_palm,tn) = sums_l(nzb+1,pr_palm,tn) + &
[2232]	734	surf_def_h(0)%usws(m) * rmask(j,i,sr)
[2773]	735	sums_l(nzb+2,pr_palm,tn) = sums_l(nzb+2,pr_palm,tn) + &
[2232]	736	surf_def_h(0)%vsws(m) * rmask(j,i,sr)
[2773]	737	sums_l(nzb+3,pr_palm,tn) = sums_l(nzb+3,pr_palm,tn) + &
[2232]	738	surf_def_h(0)%ts(m) * rmask(j,i,sr)
	739	IF ( humidity ) THEN
[2773]	740	sums_l(nzb+12,pr_palm,tn) = sums_l(nzb+12,pr_palm,tn) + &
[2232]	741	surf_def_h(0)%qs(m) * rmask(j,i,sr)
	742	ENDIF
	743	IF ( passive_scalar ) THEN
[2773]	744	sums_l(nzb+13,pr_palm,tn) = sums_l(nzb+13,pr_palm,tn) + &
[2232]	745	surf_def_h(0)%ss(m) * rmask(j,i,sr)
	746	ENDIF
[2773]	747	!
	748	!-- Summation of surface temperature.
	749	sums_l(nzb+14,pr_palm,tn) = sums_l(nzb+14,pr_palm,tn) + &
	750	surf_def_h(0)%pt_surface(m) * &
	751	rmask(j,i,sr)
[197]	752	ENDIF
[2696]	753	IF ( surf_lsm_h%end_index(j,i) >= surf_lsm_h%start_index(j,i) ) THEN
[2232]	754	m = surf_lsm_h%start_index(j,i)
[2773]	755	sums_l(nzb,pr_palm,tn) = sums_l(nzb,pr_palm,tn) + &
[2232]	756	surf_lsm_h%us(m) * rmask(j,i,sr)
[2773]	757	sums_l(nzb+1,pr_palm,tn) = sums_l(nzb+1,pr_palm,tn) + &
[2232]	758	surf_lsm_h%usws(m) * rmask(j,i,sr)
[2773]	759	sums_l(nzb+2,pr_palm,tn) = sums_l(nzb+2,pr_palm,tn) + &
[2232]	760	surf_lsm_h%vsws(m) * rmask(j,i,sr)
[2773]	761	sums_l(nzb+3,pr_palm,tn) = sums_l(nzb+3,pr_palm,tn) + &
[2232]	762	surf_lsm_h%ts(m) * rmask(j,i,sr)
	763	IF ( humidity ) THEN
[2773]	764	sums_l(nzb+12,pr_palm,tn) = sums_l(nzb+12,pr_palm,tn) + &
[2232]	765	surf_lsm_h%qs(m) * rmask(j,i,sr)
	766	ENDIF
	767	IF ( passive_scalar ) THEN
[2773]	768	sums_l(nzb+13,pr_palm,tn) = sums_l(nzb+13,pr_palm,tn) + &
[2232]	769	surf_lsm_h%ss(m) * rmask(j,i,sr)
	770	ENDIF
[2773]	771	!
	772	!-- Summation of surface temperature.
	773	sums_l(nzb+14,pr_palm,tn) = sums_l(nzb+14,pr_palm,tn) + &
	774	surf_lsm_h%pt_surface(m) * &
	775	rmask(j,i,sr)
[1960]	776	ENDIF
[2696]	777	IF ( surf_usm_h%end_index(j,i) >= surf_usm_h%start_index(j,i) ) THEN
	778	m = surf_usm_h%start_index(j,i)
[2773]	779	sums_l(nzb,pr_palm,tn) = sums_l(nzb,pr_palm,tn) + &
[2232]	780	surf_usm_h%us(m) * rmask(j,i,sr)
[2773]	781	sums_l(nzb+1,pr_palm,tn) = sums_l(nzb+1,pr_palm,tn) + &
[2232]	782	surf_usm_h%usws(m) * rmask(j,i,sr)
[2773]	783	sums_l(nzb+2,pr_palm,tn) = sums_l(nzb+2,pr_palm,tn) + &
[2232]	784	surf_usm_h%vsws(m) * rmask(j,i,sr)
[2773]	785	sums_l(nzb+3,pr_palm,tn) = sums_l(nzb+3,pr_palm,tn) + &
[2232]	786	surf_usm_h%ts(m) * rmask(j,i,sr)
	787	IF ( humidity ) THEN
[2773]	788	sums_l(nzb+12,pr_palm,tn) = sums_l(nzb+12,pr_palm,tn) + &
[2232]	789	surf_usm_h%qs(m) * rmask(j,i,sr)
	790	ENDIF
	791	IF ( passive_scalar ) THEN
[2773]	792	sums_l(nzb+13,pr_palm,tn) = sums_l(nzb+13,pr_palm,tn) + &
[2232]	793	surf_usm_h%ss(m) * rmask(j,i,sr)
	794	ENDIF
[2773]	795	!
	796	!-- Summation of surface temperature.
	797	sums_l(nzb+14,pr_palm,tn) = sums_l(nzb+14,pr_palm,tn) + &
	798	surf_usm_h%pt_surface(m) * &
	799	rmask(j,i,sr)
[2232]	800	ENDIF
[1]	801	ENDDO
	802	ENDDO
	803
	804	!
[667]	805	!-- Computation of statistics when ws-scheme is not used. Else these
	806	!-- quantities are evaluated in the advection routines.
[1918]	807	IF ( .NOT. ws_scheme_mom .OR. sr /= 0 .OR. simulated_time == 0.0_wp ) &
	808	THEN
[667]	809	!$OMP DO
	810	DO i = nxl, nxr
	811	DO j = nys, nyn
[2232]	812	DO k = nzb, nzt+1
	813	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_0(k,j,i), 22 ) )
	814
[667]	815	u2 = u(k,j,i)**2
	816	v2 = v(k,j,i)**2
	817	w2 = w(k,j,i)**2
	818	ust2 = ( u(k,j,i) - hom(k,1,1,sr) )**2
	819	vst2 = ( v(k,j,i) - hom(k,1,2,sr) )**2
	820
[2232]	821	sums_l(k,30,tn) = sums_l(k,30,tn) + ust2 * rmask(j,i,sr) &
	822	* flag
	823	sums_l(k,31,tn) = sums_l(k,31,tn) + vst2 * rmask(j,i,sr) &
	824	* flag
	825	sums_l(k,32,tn) = sums_l(k,32,tn) + w2 * rmask(j,i,sr) &
	826	* flag
[667]	827	!
[2026]	828	!-- Perturbation energy
[667]	829
[1353]	830	sums_l(k,34,tn) = sums_l(k,34,tn) + 0.5_wp * &
[2232]	831	( ust2 + vst2 + w2 ) * rmask(j,i,sr) &
	832	* flag
[667]	833	ENDDO
	834	ENDDO
	835	ENDDO
	836	ENDIF
[2026]	837	!
	838	!-- Computaion of domain-averaged perturbation energy. Please note,
	839	!-- to prevent that perturbation energy is larger (even if only slightly)
	840	!-- than the total kinetic energy, calculation is based on deviations from
	841	!-- the horizontal mean, instead of spatial descretization of the advection
	842	!-- term.
	843	!$OMP DO
	844	DO i = nxl, nxr
	845	DO j = nys, nyn
[2232]	846	DO k = nzb, nzt+1
	847	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_0(k,j,i), 22 ) )
	848
[2026]	849	w2 = w(k,j,i)**2
	850	ust2 = ( u(k,j,i) - hom(k,1,1,sr) )**2
	851	vst2 = ( v(k,j,i) - hom(k,1,2,sr) )**2
	852	w2 = w(k,j,i)**2
[1241]	853
[2026]	854	sums_l(nzb+5,pr_palm,tn) = sums_l(nzb+5,pr_palm,tn) &
[2232]	855	+ 0.5_wp * ( ust2 + vst2 + w2 ) &
	856	* rmask(j,i,sr) &
	857	* flag
[2026]	858	ENDDO
	859	ENDDO
	860	ENDDO
	861
[667]	862	!
[1]	863	!-- Horizontally averaged profiles of the vertical fluxes
[667]	864
[1]	865	!$OMP DO
	866	DO i = nxl, nxr
	867	DO j = nys, nyn
	868	!
	869	!-- Subgridscale fluxes (without Prandtl layer from k=nzb,
	870	!-- oterwise from k=nzb+1)
[132]	871	!-- NOTE: for simplicity, nzb_diff_s_inner is used below, although
[1]	872	!-- ---- strictly speaking the following k-loop would have to be
	873	!-- split up according to the staggered grid.
[132]	874	!-- However, this implies no error since staggered velocity
	875	!-- components are zero at the walls and inside buildings.
[2232]	876	!-- Flag 23 is used to mask surface fluxes as well as model-top fluxes,
	877	!-- which are added further below.
	878	DO k = nzb, nzt
	879	flag = MERGE( 1.0_wp, 0.0_wp, &
	880	BTEST( wall_flags_0(k,j,i), 23 ) ) * &
	881	MERGE( 1.0_wp, 0.0_wp, &
	882	BTEST( wall_flags_0(k,j,i), 9 ) )
[1]	883	!
	884	!-- Momentum flux w"u"
[1353]	885	sums_l(k,12,tn) = sums_l(k,12,tn) - 0.25_wp * ( &
[1]	886	km(k,j,i)+km(k+1,j,i)+km(k,j,i-1)+km(k+1,j,i-1) &
	887	) * ( &
	888	( u(k+1,j,i) - u(k,j,i) ) * ddzu(k+1) &
	889	+ ( w(k,j,i) - w(k,j,i-1) ) * ddx &
[2037]	890	) * rmask(j,i,sr) &
	891	* rho_air_zw(k) &
[2232]	892	* momentumflux_output_conversion(k) &
	893	* flag
[1]	894	!
	895	!-- Momentum flux w"v"
[1353]	896	sums_l(k,14,tn) = sums_l(k,14,tn) - 0.25_wp * ( &
[1]	897	km(k,j,i)+km(k+1,j,i)+km(k,j-1,i)+km(k+1,j-1,i) &
	898	) * ( &
	899	( v(k+1,j,i) - v(k,j,i) ) * ddzu(k+1) &
	900	+ ( w(k,j,i) - w(k,j-1,i) ) * ddy &
[2037]	901	) * rmask(j,i,sr) &
	902	* rho_air_zw(k) &
[2232]	903	* momentumflux_output_conversion(k) &
	904	* flag
[1]	905	!
	906	!-- Heat flux w"pt"
	907	sums_l(k,16,tn) = sums_l(k,16,tn) &
[1353]	908	- 0.5_wp * ( kh(k,j,i) + kh(k+1,j,i) )&
[1]	909	* ( pt(k+1,j,i) - pt(k,j,i) ) &
[2037]	910	* rho_air_zw(k) &
	911	* heatflux_output_conversion(k) &
[2232]	912	* ddzu(k+1) * rmask(j,i,sr) &
	913	* flag
[1]	914
	915
	916	!
[96]	917	!-- Salinity flux w"sa"
	918	IF ( ocean ) THEN
	919	sums_l(k,65,tn) = sums_l(k,65,tn) &
[1353]	920	- 0.5_wp * ( kh(k,j,i) + kh(k+1,j,i) )&
[96]	921	* ( sa(k+1,j,i) - sa(k,j,i) ) &
[2232]	922	* ddzu(k+1) * rmask(j,i,sr) &
	923	* flag
[96]	924	ENDIF
	925
	926	!
[1]	927	!-- Buoyancy flux, water flux (humidity flux) w"q"
[75]	928	IF ( humidity ) THEN
[1]	929	sums_l(k,45,tn) = sums_l(k,45,tn) &
[1353]	930	- 0.5_wp * ( kh(k,j,i) + kh(k+1,j,i) )&
[1]	931	* ( vpt(k+1,j,i) - vpt(k,j,i) ) &
[2037]	932	* rho_air_zw(k) &
	933	* heatflux_output_conversion(k) &
[2232]	934	* ddzu(k+1) * rmask(j,i,sr) * flag
[1]	935	sums_l(k,48,tn) = sums_l(k,48,tn) &
[1353]	936	- 0.5_wp * ( kh(k,j,i) + kh(k+1,j,i) )&
[1]	937	* ( q(k+1,j,i) - q(k,j,i) ) &
[2037]	938	* rho_air_zw(k) &
	939	* waterflux_output_conversion(k)&
[2232]	940	* ddzu(k+1) * rmask(j,i,sr) * flag
[1007]	941
[1]	942	IF ( cloud_physics ) THEN
	943	sums_l(k,51,tn) = sums_l(k,51,tn) &
[1353]	944	- 0.5_wp * ( kh(k,j,i) + kh(k+1,j,i) )&
[1]	945	* ( ( q(k+1,j,i) - ql(k+1,j,i) )&
	946	- ( q(k,j,i) - ql(k,j,i) ) ) &
[2037]	947	* rho_air_zw(k) &
	948	* waterflux_output_conversion(k)&
[2232]	949	* ddzu(k+1) * rmask(j,i,sr) * flag
[1]	950	ENDIF
	951	ENDIF
	952
	953	!
	954	!-- Passive scalar flux
	955	IF ( passive_scalar ) THEN
[2270]	956	sums_l(k,117,tn) = sums_l(k,117,tn) &
[1353]	957	- 0.5_wp * ( kh(k,j,i) + kh(k+1,j,i) )&
[2026]	958	* ( s(k+1,j,i) - s(k,j,i) ) &
[2232]	959	* ddzu(k+1) * rmask(j,i,sr) &
	960	* flag
[1]	961	ENDIF
	962
	963	ENDDO
	964
	965	!
	966	!-- Subgridscale fluxes in the Prandtl layer
	967	IF ( use_surface_fluxes ) THEN
[2232]	968	DO l = 0, 1
	969	ki = MERGE( -1, 0, l == 0 )
	970	IF ( surf_def_h(l)%ns >= 1 ) THEN
[2696]	971	DO m = surf_def_h(l)%start_index(j,i), &
	972	surf_def_h(l)%end_index(j,i)
[2232]	973	k = surf_def_h(l)%k(m)
	974
	975	sums_l(k+ki,12,tn) = sums_l(k+ki,12,tn) + &
	976	momentumflux_output_conversion(k+ki) * &
	977	surf_def_h(l)%usws(m) * rmask(j,i,sr) ! w"u"
	978	sums_l(k+ki,14,tn) = sums_l(k+ki,14,tn) + &
	979	momentumflux_output_conversion(k+ki) * &
	980	surf_def_h(l)%vsws(m) * rmask(j,i,sr) ! w"v"
	981	sums_l(k+ki,16,tn) = sums_l(k+ki,16,tn) + &
	982	heatflux_output_conversion(k+ki) * &
	983	surf_def_h(l)%shf(m) * rmask(j,i,sr) ! w"pt"
	984	sums_l(k+ki,58,tn) = sums_l(k+ki,58,tn) + &
	985	0.0_wp * rmask(j,i,sr) ! u"pt"
	986	sums_l(k+ki,61,tn) = sums_l(k+ki,61,tn) + &
	987	0.0_wp * rmask(j,i,sr) ! v"pt"
	988	IF ( ocean ) THEN
	989	sums_l(k+ki,65,tn) = sums_l(k+ki,65,tn) + &
	990	surf_def_h(l)%sasws(m) * rmask(j,i,sr) ! w"sa"
	991	ENDIF
	992	IF ( humidity ) THEN
	993	sums_l(k+ki,48,tn) = sums_l(k+ki,48,tn) + &
	994	waterflux_output_conversion(k+ki) * &
	995	surf_def_h(l)%qsws(m) * rmask(j,i,sr) ! w"q" (w"qv")
	996	sums_l(k+ki,45,tn) = sums_l(k+ki,45,tn) + ( &
	997	( 1.0_wp + 0.61_wp * q(k+ki,j,i) ) * &
	998	surf_def_h(l)%shf(m) + 0.61_wp * pt(k+ki,j,i) * &
	999	surf_def_h(l)%qsws(m) ) &
	1000	* heatflux_output_conversion(k+ki)
	1001	IF ( cloud_droplets ) THEN
	1002	sums_l(k+ki,45,tn) = sums_l(k+ki,45,tn) + ( &
	1003	( 1.0_wp + 0.61_wp * q(k+ki,j,i) - &
	1004	ql(k+ki,j,i) ) * surf_def_h(l)%shf(m) + &
	1005	0.61_wp * pt(k+ki,j,i) * surf_def_h(l)%qsws(m) ) &
	1006	* heatflux_output_conversion(k+ki)
	1007	ENDIF
	1008	IF ( cloud_physics ) THEN
	1009	!
	1010	!-- Formula does not work if ql(k+ki) /= 0.0
	1011	sums_l(k+ki,51,tn) = sums_l(k+ki,51,tn) + &
	1012	waterflux_output_conversion(k+ki) * &
	1013	surf_def_h(l)%qsws(m) * rmask(j,i,sr) ! w"q" (w"qv")
	1014	ENDIF
	1015	ENDIF
	1016	IF ( passive_scalar ) THEN
[2270]	1017	sums_l(k+ki,117,tn) = sums_l(k+ki,117,tn) + &
[2232]	1018	surf_def_h(l)%ssws(m) * rmask(j,i,sr) ! w"s"
	1019	ENDIF
	1020
	1021	ENDDO
	1022
	1023	ENDIF
	1024	ENDDO
[2696]	1025	IF ( surf_lsm_h%end_index(j,i) >= &
	1026	surf_lsm_h%start_index(j,i) ) THEN
[2232]	1027	m = surf_lsm_h%start_index(j,i)
	1028	sums_l(nzb,12,tn) = sums_l(nzb,12,tn) + &
[2037]	1029	momentumflux_output_conversion(nzb) * &
[2232]	1030	surf_lsm_h%usws(m) * rmask(j,i,sr) ! w"u"
	1031	sums_l(nzb,14,tn) = sums_l(nzb,14,tn) + &
[2037]	1032	momentumflux_output_conversion(nzb) * &
[2232]	1033	surf_lsm_h%vsws(m) * rmask(j,i,sr) ! w"v"
	1034	sums_l(nzb,16,tn) = sums_l(nzb,16,tn) + &
[2037]	1035	heatflux_output_conversion(nzb) * &
[2232]	1036	surf_lsm_h%shf(m) * rmask(j,i,sr) ! w"pt"
	1037	sums_l(nzb,58,tn) = sums_l(nzb,58,tn) + &
[1353]	1038	0.0_wp * rmask(j,i,sr) ! u"pt"
[2232]	1039	sums_l(nzb,61,tn) = sums_l(nzb,61,tn) + &
[1353]	1040	0.0_wp * rmask(j,i,sr) ! v"pt"
[2232]	1041	IF ( ocean ) THEN
	1042	sums_l(nzb,65,tn) = sums_l(nzb,65,tn) + &
	1043	surf_lsm_h%sasws(m) * rmask(j,i,sr) ! w"sa"
	1044	ENDIF
	1045	IF ( humidity ) THEN
	1046	sums_l(nzb,48,tn) = sums_l(nzb,48,tn) + &
	1047	waterflux_output_conversion(nzb) * &
	1048	surf_lsm_h%qsws(m) * rmask(j,i,sr) ! w"q" (w"qv")
	1049	sums_l(nzb,45,tn) = sums_l(nzb,45,tn) + ( &
	1050	( 1.0_wp + 0.61_wp * q(nzb,j,i) ) * &
	1051	surf_lsm_h%shf(m) + 0.61_wp * pt(nzb,j,i) * &
	1052	surf_lsm_h%qsws(m) ) &
	1053	* heatflux_output_conversion(nzb)
	1054	IF ( cloud_droplets ) THEN
	1055	sums_l(nzb,45,tn) = sums_l(nzb,45,tn) + ( &
	1056	( 1.0_wp + 0.61_wp * q(nzb,j,i) - &
	1057	ql(nzb,j,i) ) * surf_lsm_h%shf(m) + &
	1058	0.61_wp * pt(nzb,j,i) * surf_lsm_h%qsws(m) ) &
	1059	* heatflux_output_conversion(nzb)
	1060	ENDIF
	1061	IF ( cloud_physics ) THEN
	1062	!
	1063	!-- Formula does not work if ql(nzb) /= 0.0
	1064	sums_l(nzb,51,tn) = sums_l(nzb,51,tn) + &
	1065	waterflux_output_conversion(nzb) * &
	1066	surf_lsm_h%qsws(m) * rmask(j,i,sr) ! w"q" (w"qv")
	1067	ENDIF
	1068	ENDIF
	1069	IF ( passive_scalar ) THEN
[2270]	1070	sums_l(nzb,117,tn) = sums_l(nzb,117,tn) + &
[2232]	1071	surf_lsm_h%ssws(m) * rmask(j,i,sr) ! w"s"
	1072	ENDIF
	1073
	1074
[96]	1075	ENDIF
[2696]	1076	IF ( surf_usm_h%end_index(j,i) >= &
	1077	surf_usm_h%start_index(j,i) ) THEN
[2232]	1078	m = surf_usm_h%start_index(j,i)
	1079	sums_l(nzb,12,tn) = sums_l(nzb,12,tn) + &
	1080	momentumflux_output_conversion(nzb) * &
	1081	surf_usm_h%usws(m) * rmask(j,i,sr) ! w"u"
	1082	sums_l(nzb,14,tn) = sums_l(nzb,14,tn) + &
	1083	momentumflux_output_conversion(nzb) * &
	1084	surf_usm_h%vsws(m) * rmask(j,i,sr) ! w"v"
	1085	sums_l(nzb,16,tn) = sums_l(nzb,16,tn) + &
	1086	heatflux_output_conversion(nzb) * &
	1087	surf_usm_h%shf(m) * rmask(j,i,sr) ! w"pt"
	1088	sums_l(nzb,58,tn) = sums_l(nzb,58,tn) + &
	1089	0.0_wp * rmask(j,i,sr) ! u"pt"
	1090	sums_l(nzb,61,tn) = sums_l(nzb,61,tn) + &
	1091	0.0_wp * rmask(j,i,sr) ! v"pt"
	1092	IF ( ocean ) THEN
	1093	sums_l(nzb,65,tn) = sums_l(nzb,65,tn) + &
	1094	surf_usm_h%sasws(m) * rmask(j,i,sr) ! w"sa"
	1095	ENDIF
	1096	IF ( humidity ) THEN
	1097	sums_l(nzb,48,tn) = sums_l(nzb,48,tn) + &
[2037]	1098	waterflux_output_conversion(nzb) * &
[2232]	1099	surf_usm_h%qsws(m) * rmask(j,i,sr) ! w"q" (w"qv")
	1100	sums_l(nzb,45,tn) = sums_l(nzb,45,tn) + ( &
[1353]	1101	( 1.0_wp + 0.61_wp * q(nzb,j,i) ) * &
[2232]	1102	surf_usm_h%shf(m) + 0.61_wp * pt(nzb,j,i) * &
	1103	surf_usm_h%qsws(m) ) &
[2037]	1104	* heatflux_output_conversion(nzb)
[2232]	1105	IF ( cloud_droplets ) THEN
	1106	sums_l(nzb,45,tn) = sums_l(nzb,45,tn) + ( &
[1353]	1107	( 1.0_wp + 0.61_wp * q(nzb,j,i) - &
[2232]	1108	ql(nzb,j,i) ) * surf_usm_h%shf(m) + &
	1109	0.61_wp * pt(nzb,j,i) * surf_usm_h%qsws(m) ) &
[2037]	1110	* heatflux_output_conversion(nzb)
[2232]	1111	ENDIF
	1112	IF ( cloud_physics ) THEN
[1]	1113	!
[2232]	1114	!-- Formula does not work if ql(nzb) /= 0.0
	1115	sums_l(nzb,51,tn) = sums_l(nzb,51,tn) + &
[2037]	1116	waterflux_output_conversion(nzb) * &
[2232]	1117	surf_usm_h%qsws(m) * rmask(j,i,sr) ! w"q" (w"qv")
	1118	ENDIF
[1]	1119	ENDIF
[2232]	1120	IF ( passive_scalar ) THEN
[2270]	1121	sums_l(nzb,117,tn) = sums_l(nzb,117,tn) + &
[2232]	1122	surf_usm_h%ssws(m) * rmask(j,i,sr) ! w"s"
	1123	ENDIF
	1124
	1125
[1]	1126	ENDIF
[2232]	1127
[1]	1128	ENDIF
	1129
[1691]	1130	IF ( .NOT. neutral ) THEN
[2696]	1131	IF ( surf_def_h(0)%end_index(j,i) >= &
	1132	surf_def_h(0)%start_index(j,i) ) THEN
[2232]	1133	m = surf_def_h(0)%start_index(j,i)
[2696]	1134	sums_l(nzb,112,tn) = sums_l(nzb,112,tn) + &
[2232]	1135	surf_def_h(0)%ol(m) * rmask(j,i,sr) ! L
	1136	ENDIF
[2696]	1137	IF ( surf_lsm_h%end_index(j,i) >= &
	1138	surf_lsm_h%start_index(j,i) ) THEN
[2232]	1139	m = surf_lsm_h%start_index(j,i)
[2696]	1140	sums_l(nzb,112,tn) = sums_l(nzb,112,tn) + &
[2232]	1141	surf_lsm_h%ol(m) * rmask(j,i,sr) ! L
	1142	ENDIF
[2696]	1143	IF ( surf_usm_h%end_index(j,i) >= &
	1144	surf_usm_h%start_index(j,i) ) THEN
[2232]	1145	m = surf_usm_h%start_index(j,i)
[2696]	1146	sums_l(nzb,112,tn) = sums_l(nzb,112,tn) + &
[2232]	1147	surf_usm_h%ol(m) * rmask(j,i,sr) ! L
	1148	ENDIF
[1691]	1149	ENDIF
	1150
[2296]	1151	IF ( radiation ) THEN
[2696]	1152	IF ( surf_def_h(0)%end_index(j,i) >= &
	1153	surf_def_h(0)%start_index(j,i) ) THEN
	1154	m = surf_def_h(0)%start_index(j,i)
	1155	sums_l(nzb,99,tn) = sums_l(nzb,99,tn) + &
	1156	surf_def_h(0)%rad_net(m) * rmask(j,i,sr)
	1157	sums_l(nzb,100,tn) = sums_l(nzb,100,tn) + &
	1158	surf_def_h(0)%rad_lw_in(m) * rmask(j,i,sr)
	1159	sums_l(nzb,101,tn) = sums_l(nzb,101,tn) + &
	1160	surf_def_h(0)%rad_lw_out(m) * rmask(j,i,sr)
	1161	sums_l(nzb,102,tn) = sums_l(nzb,102,tn) + &
	1162	surf_def_h(0)%rad_sw_in(m) * rmask(j,i,sr)
	1163	sums_l(nzb,103,tn) = sums_l(nzb,103,tn) + &
	1164	surf_def_h(0)%rad_sw_out(m) * rmask(j,i,sr)
	1165	ENDIF
	1166	IF ( surf_lsm_h%end_index(j,i) >= &
	1167	surf_lsm_h%start_index(j,i) ) THEN
	1168	m = surf_lsm_h%start_index(j,i)
	1169	sums_l(nzb,99,tn) = sums_l(nzb,99,tn) + &
	1170	surf_lsm_h%rad_net(m) * rmask(j,i,sr)
	1171	sums_l(nzb,100,tn) = sums_l(nzb,100,tn) + &
	1172	surf_lsm_h%rad_lw_in(m) * rmask(j,i,sr)
	1173	sums_l(nzb,101,tn) = sums_l(nzb,101,tn) + &
	1174	surf_lsm_h%rad_lw_out(m) * rmask(j,i,sr)
	1175	sums_l(nzb,102,tn) = sums_l(nzb,102,tn) + &
	1176	surf_lsm_h%rad_sw_in(m) * rmask(j,i,sr)
	1177	sums_l(nzb,103,tn) = sums_l(nzb,103,tn) + &
	1178	surf_lsm_h%rad_sw_out(m) * rmask(j,i,sr)
	1179	ENDIF
	1180	IF ( surf_usm_h%end_index(j,i) >= &
	1181	surf_usm_h%start_index(j,i) ) THEN
	1182	m = surf_usm_h%start_index(j,i)
	1183	sums_l(nzb,99,tn) = sums_l(nzb,99,tn) + &
	1184	surf_usm_h%rad_net(m) * rmask(j,i,sr)
	1185	sums_l(nzb,100,tn) = sums_l(nzb,100,tn) + &
	1186	surf_usm_h%rad_lw_in(m) * rmask(j,i,sr)
	1187	sums_l(nzb,101,tn) = sums_l(nzb,101,tn) + &
	1188	surf_usm_h%rad_lw_out(m) * rmask(j,i,sr)
	1189	sums_l(nzb,102,tn) = sums_l(nzb,102,tn) + &
	1190	surf_usm_h%rad_sw_in(m) * rmask(j,i,sr)
	1191	sums_l(nzb,103,tn) = sums_l(nzb,103,tn) + &
	1192	surf_usm_h%rad_sw_out(m) * rmask(j,i,sr)
	1193	ENDIF
[1585]	1194
	1195	#if defined ( __rrtmg )
	1196	IF ( radiation_scheme == 'rrtmg' ) THEN
[2696]	1197
	1198	IF ( surf_def_h(0)%end_index(j,i) >= &
	1199	surf_def_h(0)%start_index(j,i) ) THEN
	1200	m = surf_def_h(0)%start_index(j,i)
	1201	sums_l(nzb,108,tn) = sums_l(nzb,108,tn) + &
[2753]	1202	surf_def_h(0)%rrtm_aldif(0,m) * rmask(j,i,sr)
[2696]	1203	sums_l(nzb,109,tn) = sums_l(nzb,109,tn) + &
[2753]	1204	surf_def_h(0)%rrtm_aldir(0,m) * rmask(j,i,sr)
[2696]	1205	sums_l(nzb,110,tn) = sums_l(nzb,110,tn) + &
[2753]	1206	surf_def_h(0)%rrtm_asdif(0,m) * rmask(j,i,sr)
[2696]	1207	sums_l(nzb,111,tn) = sums_l(nzb,111,tn) + &
[2753]	1208	surf_def_h(0)%rrtm_asdir(0,m) * rmask(j,i,sr)
[2696]	1209	ENDIF
	1210	IF ( surf_lsm_h%end_index(j,i) >= &
	1211	surf_lsm_h%start_index(j,i) ) THEN
	1212	m = surf_lsm_h%start_index(j,i)
	1213	sums_l(nzb,108,tn) = sums_l(nzb,108,tn) + &
[2753]	1214	SUM( surf_lsm_h%frac(:,m) * &
	1215	surf_lsm_h%rrtm_aldif(:,m) ) * rmask(j,i,sr)
[2696]	1216	sums_l(nzb,109,tn) = sums_l(nzb,109,tn) + &
[2753]	1217	SUM( surf_lsm_h%frac(:,m) * &
	1218	surf_lsm_h%rrtm_aldir(:,m) ) * rmask(j,i,sr)
[2696]	1219	sums_l(nzb,110,tn) = sums_l(nzb,110,tn) + &
[2753]	1220	SUM( surf_lsm_h%frac(:,m) * &
	1221	surf_lsm_h%rrtm_asdif(:,m) ) * rmask(j,i,sr)
[2696]	1222	sums_l(nzb,111,tn) = sums_l(nzb,111,tn) + &
[2753]	1223	SUM( surf_lsm_h%frac(:,m) * &
	1224	surf_lsm_h%rrtm_asdir(:,m) ) * rmask(j,i,sr)
[2696]	1225	ENDIF
	1226	IF ( surf_usm_h%end_index(j,i) >= &
	1227	surf_usm_h%start_index(j,i) ) THEN
	1228	m = surf_usm_h%start_index(j,i)
	1229	sums_l(nzb,108,tn) = sums_l(nzb,108,tn) + &
[2753]	1230	SUM( surf_usm_h%frac(:,m) * &
	1231	surf_usm_h%rrtm_aldif(:,m) ) * rmask(j,i,sr)
[2696]	1232	sums_l(nzb,109,tn) = sums_l(nzb,109,tn) + &
[2753]	1233	SUM( surf_usm_h%frac(:,m) * &
	1234	surf_usm_h%rrtm_aldir(:,m) ) * rmask(j,i,sr)
[2696]	1235	sums_l(nzb,110,tn) = sums_l(nzb,110,tn) + &
[2753]	1236	SUM( surf_usm_h%frac(:,m) * &
	1237	surf_usm_h%rrtm_asdif(:,m) ) * rmask(j,i,sr)
[2696]	1238	sums_l(nzb,111,tn) = sums_l(nzb,111,tn) + &
[2753]	1239	SUM( surf_usm_h%frac(:,m) * &
	1240	surf_usm_h%rrtm_asdir(:,m) ) * rmask(j,i,sr)
[2696]	1241	ENDIF
	1242
[1585]	1243	ENDIF
	1244	#endif
[1551]	1245	ENDIF
[1]	1246	!
[19]	1247	!-- Subgridscale fluxes at the top surface
	1248	IF ( use_top_fluxes ) THEN
[2232]	1249	m = surf_def_h(2)%start_index(j,i)
[550]	1250	sums_l(nzt:nzt+1,12,tn) = sums_l(nzt:nzt+1,12,tn) + &
[2037]	1251	momentumflux_output_conversion(nzt:nzt+1) * &
[2232]	1252	surf_def_h(2)%usws(m) * rmask(j,i,sr) ! w"u"
[550]	1253	sums_l(nzt:nzt+1,14,tn) = sums_l(nzt:nzt+1,14,tn) + &
[2037]	1254	momentumflux_output_conversion(nzt:nzt+1) * &
[2232]	1255	surf_def_h(2)%vsws(m) * rmask(j,i,sr) ! w"v"
[550]	1256	sums_l(nzt:nzt+1,16,tn) = sums_l(nzt:nzt+1,16,tn) + &
[2037]	1257	heatflux_output_conversion(nzt:nzt+1) * &
[2232]	1258	surf_def_h(2)%shf(m) * rmask(j,i,sr) ! w"pt"
[550]	1259	sums_l(nzt:nzt+1,58,tn) = sums_l(nzt:nzt+1,58,tn) + &
[1353]	1260	0.0_wp * rmask(j,i,sr) ! u"pt"
[550]	1261	sums_l(nzt:nzt+1,61,tn) = sums_l(nzt:nzt+1,61,tn) + &
[1353]	1262	0.0_wp * rmask(j,i,sr) ! v"pt"
[550]	1263
[96]	1264	IF ( ocean ) THEN
	1265	sums_l(nzt,65,tn) = sums_l(nzt,65,tn) + &
[2232]	1266	surf_def_h(2)%sasws(m) * rmask(j,i,sr) ! w"sa"
[96]	1267	ENDIF
[75]	1268	IF ( humidity ) THEN
[1353]	1269	sums_l(nzt,48,tn) = sums_l(nzt,48,tn) + &
[2037]	1270	waterflux_output_conversion(nzt) * &
[2232]	1271	surf_def_h(2)%qsws(m) * rmask(j,i,sr) ! w"q" (w"qv")
[1353]	1272	sums_l(nzt,45,tn) = sums_l(nzt,45,tn) + ( &
	1273	( 1.0_wp + 0.61_wp * q(nzt,j,i) ) * &
[2232]	1274	surf_def_h(2)%shf(m) + &
	1275	0.61_wp * pt(nzt,j,i) * &
	1276	surf_def_h(2)%qsws(m) ) &
[2037]	1277	* heatflux_output_conversion(nzt)
[1007]	1278	IF ( cloud_droplets ) THEN
[1353]	1279	sums_l(nzt,45,tn) = sums_l(nzt,45,tn) + ( &
	1280	( 1.0_wp + 0.61_wp * q(nzt,j,i) - &
[2232]	1281	ql(nzt,j,i) ) * &
	1282	surf_def_h(2)%shf(m) + &
	1283	0.61_wp * pt(nzt,j,i) * &
	1284	surf_def_h(2)%qsws(m) )&
[2037]	1285	* heatflux_output_conversion(nzt)
[1007]	1286	ENDIF
[19]	1287	IF ( cloud_physics ) THEN
	1288	!
	1289	!-- Formula does not work if ql(nzb) /= 0.0
	1290	sums_l(nzt,51,tn) = sums_l(nzt,51,tn) + & ! w"q" (w"qv")
[2037]	1291	waterflux_output_conversion(nzt) * &
[2232]	1292	surf_def_h(2)%qsws(m) * rmask(j,i,sr)
[19]	1293	ENDIF
	1294	ENDIF
	1295	IF ( passive_scalar ) THEN
[2270]	1296	sums_l(nzt,117,tn) = sums_l(nzt,117,tn) + &
[2232]	1297	surf_def_h(2)%ssws(m) * rmask(j,i,sr) ! w"s"
[19]	1298	ENDIF
	1299	ENDIF
	1300
	1301	!
[1]	1302	!-- Resolved fluxes (can be computed for all horizontal points)
[132]	1303	!-- NOTE: for simplicity, nzb_s_inner is used below, although strictly
[1]	1304	!-- ---- speaking the following k-loop would have to be split up and
	1305	!-- rearranged according to the staggered grid.
[2232]	1306	DO k = nzb, nzt
	1307	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_0(k,j,i), 22 ) )
[1353]	1308	ust = 0.5_wp * ( u(k,j,i) - hom(k,1,1,sr) + &
	1309	u(k+1,j,i) - hom(k+1,1,1,sr) )
	1310	vst = 0.5_wp * ( v(k,j,i) - hom(k,1,2,sr) + &
	1311	v(k+1,j,i) - hom(k+1,1,2,sr) )
	1312	pts = 0.5_wp * ( pt(k,j,i) - hom(k,1,4,sr) + &
	1313	pt(k+1,j,i) - hom(k+1,1,4,sr) )
[667]	1314
[1]	1315	!-- Higher moments
[1353]	1316	sums_l(k,35,tn) = sums_l(k,35,tn) + pts * w(k,j,i)*2 &
[2232]	1317	rmask(j,i,sr) * flag
[1353]	1318	sums_l(k,36,tn) = sums_l(k,36,tn) + pts*2 w(k,j,i) * &
[2232]	1319	rmask(j,i,sr) * flag
[1]	1320
	1321	!
[96]	1322	!-- Salinity flux and density (density does not belong to here,
[97]	1323	!-- but so far there is no other suitable place to calculate)
[96]	1324	IF ( ocean ) THEN
[1567]	1325	IF( .NOT. ws_scheme_sca .OR. sr /= 0 ) THEN
[1353]	1326	pts = 0.5_wp * ( sa(k,j,i) - hom(k,1,23,sr) + &
	1327	sa(k+1,j,i) - hom(k+1,1,23,sr) )
	1328	sums_l(k,66,tn) = sums_l(k,66,tn) + pts * w(k,j,i) * &
[2232]	1329	rmask(j,i,sr) * flag
[667]	1330	ENDIF
[2232]	1331	sums_l(k,64,tn) = sums_l(k,64,tn) + rho_ocean(k,j,i) * &
	1332	rmask(j,i,sr) * flag
[1353]	1333	sums_l(k,71,tn) = sums_l(k,71,tn) + prho(k,j,i) * &
[2232]	1334	rmask(j,i,sr) * flag
[96]	1335	ENDIF
	1336
	1337	!
[1053]	1338	!-- Buoyancy flux, water flux, humidity flux, liquid water
	1339	!-- content, rain drop concentration and rain water content
[75]	1340	IF ( humidity ) THEN
[1007]	1341	IF ( cloud_physics .OR. cloud_droplets ) THEN
[1353]	1342	pts = 0.5_wp * ( vpt(k,j,i) - hom(k,1,44,sr) + &
[1007]	1343	vpt(k+1,j,i) - hom(k+1,1,44,sr) )
[1353]	1344	sums_l(k,46,tn) = sums_l(k,46,tn) + pts * w(k,j,i) * &
[2037]	1345	heatflux_output_conversion(k) * &
[2232]	1346	rmask(j,i,sr) * flag
	1347	sums_l(k,54,tn) = sums_l(k,54,tn) + ql(k,j,i) * rmask(j,i,sr) &
	1348	* flag
[1822]	1349
[1053]	1350	IF ( .NOT. cloud_droplets ) THEN
[1353]	1351	pts = 0.5_wp * &
[1115]	1352	( ( q(k,j,i) - ql(k,j,i) ) - &
	1353	hom(k,1,42,sr) + &
	1354	( q(k+1,j,i) - ql(k+1,j,i) ) - &
[1053]	1355	hom(k+1,1,42,sr) )
[1115]	1356	sums_l(k,52,tn) = sums_l(k,52,tn) + pts * w(k,j,i) * &
[2037]	1357	waterflux_output_conversion(k) * &
[2232]	1358	rmask(j,i,sr) * &
	1359	flag
[1822]	1360	sums_l(k,75,tn) = sums_l(k,75,tn) + qc(k,j,i) * &
[2232]	1361	rmask(j,i,sr) * &
	1362	flag
[1822]	1363	sums_l(k,76,tn) = sums_l(k,76,tn) + prr(k,j,i) * &
[2232]	1364	rmask(j,i,sr) * &
	1365	flag
[2292]	1366	IF ( microphysics_morrison ) THEN
	1367	sums_l(k,123,tn) = sums_l(k,123,tn) + nc(k,j,i) * &
	1368	rmask(j,i,sr) *&
	1369	flag
	1370	ENDIF
[1822]	1371	IF ( microphysics_seifert ) THEN
	1372	sums_l(k,73,tn) = sums_l(k,73,tn) + nr(k,j,i) * &
[2232]	1373	rmask(j,i,sr) *&
	1374	flag
[1822]	1375	sums_l(k,74,tn) = sums_l(k,74,tn) + qr(k,j,i) * &
[2232]	1376	rmask(j,i,sr) *&
	1377	flag
[1053]	1378	ENDIF
	1379	ENDIF
[1822]	1380
[1007]	1381	ELSE
[1567]	1382	IF( .NOT. ws_scheme_sca .OR. sr /= 0 ) THEN
[1353]	1383	pts = 0.5_wp * ( vpt(k,j,i) - hom(k,1,44,sr) + &
	1384	vpt(k+1,j,i) - hom(k+1,1,44,sr) )
	1385	sums_l(k,46,tn) = sums_l(k,46,tn) + pts * w(k,j,i) * &
[2037]	1386	heatflux_output_conversion(k) * &
[2232]	1387	rmask(j,i,sr) * &
	1388	flag
[1567]	1389	ELSE IF ( ws_scheme_sca .AND. sr == 0 ) THEN
[2037]	1390	sums_l(k,46,tn) = ( ( 1.0_wp + 0.61_wp * &
	1391	hom(k,1,41,sr) ) * &
	1392	sums_l(k,17,tn) + &
	1393	0.61_wp * hom(k,1,4,sr) * &
	1394	sums_l(k,49,tn) &
[2232]	1395	) * heatflux_output_conversion(k) * &
	1396	flag
[1007]	1397	END IF
	1398	END IF
[1]	1399	ENDIF
	1400	!
	1401	!-- Passive scalar flux
[1353]	1402	IF ( passive_scalar .AND. ( .NOT. ws_scheme_sca &
[1567]	1403	.OR. sr /= 0 ) ) THEN
[2270]	1404	pts = 0.5_wp * ( s(k,j,i) - hom(k,1,115,sr) + &
	1405	s(k+1,j,i) - hom(k+1,1,115,sr) )
	1406	sums_l(k,114,tn) = sums_l(k,114,tn) + pts * w(k,j,i) * &
[2232]	1407	rmask(j,i,sr) * flag
[1]	1408	ENDIF
	1409
	1410	!
	1411	!-- Energy flux we
[667]	1412	!-- has to be adjusted
[1353]	1413	sums_l(k,37,tn) = sums_l(k,37,tn) + w(k,j,i) * 0.5_wp * &
	1414	( ust2 + vst2 + w(k,j,i)**2 ) &
[2674]	1415	* rho_air_zw(k) &
[2037]	1416	* momentumflux_output_conversion(k) &
[2232]	1417	* rmask(j,i,sr) * flag
[1]	1418	ENDDO
	1419	ENDDO
	1420	ENDDO
[2232]	1421	!$OMP END PARALLEL
[709]	1422	!
[2232]	1423	!-- Treat land-surface quantities according to new wall model structure.
	1424	IF ( land_surface ) THEN
	1425	tn = 0
	1426	!$OMP PARALLEL PRIVATE( i, j, m, tn )
	1427	!$ tn = omp_get_thread_num()
	1428	!$OMP DO
	1429	DO m = 1, surf_lsm_h%ns
	1430	i = surf_lsm_h%i(m)
	1431	j = surf_lsm_h%j(m)
	1432
	1433	IF ( i >= nxl .AND. i <= nxr .AND. &
	1434	j >= nys .AND. j <= nyn ) THEN
[2270]	1435	sums_l(nzb,93,tn) = sums_l(nzb,93,tn) + surf_lsm_h%ghf(m)
	1436	sums_l(nzb,94,tn) = sums_l(nzb,94,tn) + surf_lsm_h%qsws_liq(m)
	1437	sums_l(nzb,95,tn) = sums_l(nzb,95,tn) + surf_lsm_h%qsws_soil(m)
	1438	sums_l(nzb,96,tn) = sums_l(nzb,96,tn) + surf_lsm_h%qsws_veg(m)
	1439	sums_l(nzb,97,tn) = sums_l(nzb,97,tn) + surf_lsm_h%r_a(m)
	1440	sums_l(nzb,98,tn) = sums_l(nzb,98,tn)+ surf_lsm_h%r_s(m)
[2232]	1441	ENDIF
	1442	ENDDO
	1443	!$OMP END PARALLEL
	1444
	1445	tn = 0
	1446	!$OMP PARALLEL PRIVATE( i, j, k, m, tn )
	1447	!$ tn = omp_get_thread_num()
	1448	!$OMP DO
	1449	DO m = 1, surf_lsm_h%ns
	1450
	1451	i = surf_lsm_h%i(m)
	1452	j = surf_lsm_h%j(m)
	1453
	1454	IF ( i >= nxl .AND. i <= nxr .AND. &
	1455	j >= nys .AND. j <= nyn ) THEN
	1456
	1457	DO k = nzb_soil, nzt_soil
	1458	sums_l(k,89,tn) = sums_l(k,89,tn) + t_soil_h%var_2d(k,m) &
	1459	* rmask(j,i,sr)
	1460	sums_l(k,91,tn) = sums_l(k,91,tn) + m_soil_h%var_2d(k,m) &
	1461	* rmask(j,i,sr)
	1462	ENDDO
	1463	ENDIF
	1464	ENDDO
	1465	!$OMP END PARALLEL
	1466	ENDIF
	1467	!
[709]	1468	!-- For speed optimization fluxes which have been computed in part directly
	1469	!-- inside the WS advection routines are treated seperatly
	1470	!-- Momentum fluxes first:
[2232]	1471
	1472	tn = 0
	1473	!$OMP PARALLEL PRIVATE( i, j, k, tn, flag )
	1474	!$ tn = omp_get_thread_num()
[743]	1475	IF ( .NOT. ws_scheme_mom .OR. sr /= 0 ) THEN
[2232]	1476	!$OMP DO
	1477	DO i = nxl, nxr
	1478	DO j = nys, nyn
	1479	DO k = nzb, nzt
[1007]	1480	!
[2232]	1481	!-- Flag 23 is used to mask surface fluxes as well as model-top
	1482	!-- fluxes, which are added further below.
	1483	flag = MERGE( 1.0_wp, 0.0_wp, &
	1484	BTEST( wall_flags_0(k,j,i), 23 ) ) * &
	1485	MERGE( 1.0_wp, 0.0_wp, &
	1486	BTEST( wall_flags_0(k,j,i), 9 ) )
	1487
	1488	ust = 0.5_wp * ( u(k,j,i) - hom(k,1,1,sr) + &
	1489	u(k+1,j,i) - hom(k+1,1,1,sr) )
	1490	vst = 0.5_wp * ( v(k,j,i) - hom(k,1,2,sr) + &
	1491	v(k+1,j,i) - hom(k+1,1,2,sr) )
[667]	1492	!
[2232]	1493	!-- Momentum flux wu
	1494	sums_l(k,13,tn) = sums_l(k,13,tn) + 0.5_wp * &
	1495	( w(k,j,i-1) + w(k,j,i) ) &
[2674]	1496	* rho_air_zw(k) &
[2232]	1497	* momentumflux_output_conversion(k) &
	1498	* ust * rmask(j,i,sr) &
	1499	* flag
	1500	!
	1501	!-- Momentum flux wv
	1502	sums_l(k,15,tn) = sums_l(k,15,tn) + 0.5_wp * &
	1503	( w(k,j-1,i) + w(k,j,i) ) &
[2674]	1504	* rho_air_zw(k) &
[2232]	1505	* momentumflux_output_conversion(k) &
	1506	* vst * rmask(j,i,sr) &
	1507	* flag
	1508	ENDDO
	1509	ENDDO
	1510	ENDDO
[1]	1511
[667]	1512	ENDIF
[1567]	1513	IF ( .NOT. ws_scheme_sca .OR. sr /= 0 ) THEN
[2232]	1514	!$OMP DO
	1515	DO i = nxl, nxr
	1516	DO j = nys, nyn
	1517	DO k = nzb, nzt
	1518	flag = MERGE( 1.0_wp, 0.0_wp, &
	1519	BTEST( wall_flags_0(k,j,i), 23 ) ) * &
	1520	MERGE( 1.0_wp, 0.0_wp, &
	1521	BTEST( wall_flags_0(k,j,i), 9 ) )
[709]	1522	!
[2232]	1523	!-- Vertical heat flux
	1524	sums_l(k,17,tn) = sums_l(k,17,tn) + 0.5_wp * &
[1353]	1525	( pt(k,j,i) - hom(k,1,4,sr) + &
	1526	pt(k+1,j,i) - hom(k+1,1,4,sr) ) &
[2037]	1527	* heatflux_output_conversion(k) &
[2232]	1528	* w(k,j,i) * rmask(j,i,sr) * flag
	1529	IF ( humidity ) THEN
	1530	pts = 0.5_wp * ( q(k,j,i) - hom(k,1,41,sr) + &
[1353]	1531	q(k+1,j,i) - hom(k+1,1,41,sr) )
[2232]	1532	sums_l(k,49,tn) = sums_l(k,49,tn) + pts * w(k,j,i) * &
[2037]	1533	waterflux_output_conversion(k) * &
[2232]	1534	rmask(j,i,sr) * flag
	1535	ENDIF
	1536	IF ( passive_scalar ) THEN
[2270]	1537	pts = 0.5_wp * ( s(k,j,i) - hom(k,1,115,sr) + &
	1538	s(k+1,j,i) - hom(k+1,1,115,sr) )
	1539	sums_l(k,114,tn) = sums_l(k,114,tn) + pts * w(k,j,i) * &
[2232]	1540	rmask(j,i,sr) * flag
	1541	ENDIF
	1542	ENDDO
	1543	ENDDO
	1544	ENDDO
[667]	1545
	1546	ENDIF
	1547
[1]	1548	!
[97]	1549	!-- Density at top follows Neumann condition
[388]	1550	IF ( ocean ) THEN
	1551	sums_l(nzt+1,64,tn) = sums_l(nzt,64,tn)
	1552	sums_l(nzt+1,71,tn) = sums_l(nzt,71,tn)
	1553	ENDIF
[97]	1554
	1555	!
[1]	1556	!-- Divergence of vertical flux of resolved scale energy and pressure
[106]	1557	!-- fluctuations as well as flux of pressure fluctuation itself (68).
	1558	!-- First calculate the products, then the divergence.
[1]	1559	!-- Calculation is time consuming. Do it only, if profiles shall be plotted.
[1691]	1560	IF ( hom(nzb+1,2,55,0) /= 0.0_wp .OR. hom(nzb+1,2,68,0) /= 0.0_wp ) &
	1561	THEN
[1353]	1562	sums_ll = 0.0_wp ! local array
[1]	1563
	1564	!$OMP DO
	1565	DO i = nxl, nxr
	1566	DO j = nys, nyn
[2232]	1567	DO k = nzb+1, nzt
	1568	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_0(k,j,i), 0 ) )
[1]	1569
[1353]	1570	sums_ll(k,1) = sums_ll(k,1) + 0.5_wp * w(k,j,i) * ( &
[1652]	1571	( 0.25_wp * ( u(k,j,i)+u(k+1,j,i)+u(k,j,i+1)+u(k+1,j,i+1) ) &
	1572	- 0.5_wp * ( hom(k,1,1,sr) + hom(k+1,1,1,sr) ) )**2&
	1573	+ ( 0.25_wp * ( v(k,j,i)+v(k+1,j,i)+v(k,j+1,i)+v(k+1,j+1,i) ) &
[1654]	1574	- 0.5_wp * ( hom(k,1,2,sr) + hom(k+1,1,2,sr) ) )**2&
[2232]	1575	+ w(k,j,i)*2 ) flag
[1]	1576
[1353]	1577	sums_ll(k,2) = sums_ll(k,2) + 0.5_wp * w(k,j,i) &
[2252]	1578	* ( ( p(k,j,i) + p(k+1,j,i) ) &
	1579	/ momentumflux_output_conversion(k) ) &
	1580	* flag
[1]	1581
	1582	ENDDO
	1583	ENDDO
	1584	ENDDO
[1353]	1585	sums_ll(0,1) = 0.0_wp ! because w is zero at the bottom
	1586	sums_ll(nzt+1,1) = 0.0_wp
	1587	sums_ll(0,2) = 0.0_wp
	1588	sums_ll(nzt+1,2) = 0.0_wp
[1]	1589
[678]	1590	DO k = nzb+1, nzt
[1]	1591	sums_l(k,55,tn) = ( sums_ll(k,1) - sums_ll(k-1,1) ) * ddzw(k)
	1592	sums_l(k,56,tn) = ( sums_ll(k,2) - sums_ll(k-1,2) ) * ddzw(k)
[106]	1593	sums_l(k,68,tn) = sums_ll(k,2)
[1]	1594	ENDDO
	1595	sums_l(nzb,55,tn) = sums_l(nzb+1,55,tn)
	1596	sums_l(nzb,56,tn) = sums_l(nzb+1,56,tn)
[1353]	1597	sums_l(nzb,68,tn) = 0.0_wp ! because w* = 0 at nzb
[1]	1598
	1599	ENDIF
	1600
	1601	!
[106]	1602	!-- Divergence of vertical flux of SGS TKE and the flux itself (69)
[1691]	1603	IF ( hom(nzb+1,2,57,0) /= 0.0_wp .OR. hom(nzb+1,2,69,0) /= 0.0_wp ) &
	1604	THEN
[1]	1605	!$OMP DO
	1606	DO i = nxl, nxr
	1607	DO j = nys, nyn
[2232]	1608	DO k = nzb+1, nzt
[1]	1609
[2232]	1610	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_0(k,j,i), 0 ) )
	1611
[1353]	1612	sums_l(k,57,tn) = sums_l(k,57,tn) - 0.5_wp * ( &
[1]	1613	(km(k,j,i)+km(k+1,j,i)) * (e(k+1,j,i)-e(k,j,i)) * ddzu(k+1) &
	1614	- (km(k-1,j,i)+km(k,j,i)) * (e(k,j,i)-e(k-1,j,i)) * ddzu(k) &
[2232]	1615	) * ddzw(k) &
	1616	* flag
[1]	1617
[1353]	1618	sums_l(k,69,tn) = sums_l(k,69,tn) - 0.5_wp * ( &
[106]	1619	(km(k,j,i)+km(k+1,j,i)) * (e(k+1,j,i)-e(k,j,i)) * ddzu(k+1) &
[2232]	1620	) * flag
[106]	1621
[1]	1622	ENDDO
	1623	ENDDO
	1624	ENDDO
	1625	sums_l(nzb,57,tn) = sums_l(nzb+1,57,tn)
[106]	1626	sums_l(nzb,69,tn) = sums_l(nzb+1,69,tn)
[1]	1627
	1628	ENDIF
	1629
	1630	!
	1631	!-- Horizontal heat fluxes (subgrid, resolved, total).
	1632	!-- Do it only, if profiles shall be plotted.
[1353]	1633	IF ( hom(nzb+1,2,58,0) /= 0.0_wp ) THEN
[1]	1634
	1635	!$OMP DO
	1636	DO i = nxl, nxr
	1637	DO j = nys, nyn
[2232]	1638	DO k = nzb+1, nzt
	1639	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_0(k,j,i), 0 ) )
[1]	1640	!
	1641	!-- Subgrid horizontal heat fluxes u"pt", v"pt"
[1353]	1642	sums_l(k,58,tn) = sums_l(k,58,tn) - 0.5_wp * &
[1]	1643	( kh(k,j,i) + kh(k,j,i-1) ) &
	1644	* ( pt(k,j,i-1) - pt(k,j,i) ) &
[2037]	1645	* rho_air_zw(k) &
	1646	* heatflux_output_conversion(k) &
[2232]	1647	* ddx * rmask(j,i,sr) * flag
[1353]	1648	sums_l(k,61,tn) = sums_l(k,61,tn) - 0.5_wp * &
[1]	1649	( kh(k,j,i) + kh(k,j-1,i) ) &
	1650	* ( pt(k,j-1,i) - pt(k,j,i) ) &
[2037]	1651	* rho_air_zw(k) &
	1652	* heatflux_output_conversion(k) &
[2232]	1653	* ddy * rmask(j,i,sr) * flag
[1]	1654	!
	1655	!-- Resolved horizontal heat fluxes upt, vpt
	1656	sums_l(k,59,tn) = sums_l(k,59,tn) + &
	1657	( u(k,j,i) - hom(k,1,1,sr) ) &
[1353]	1658	* 0.5_wp * ( pt(k,j,i-1) - hom(k,1,4,sr) + &
[2037]	1659	pt(k,j,i) - hom(k,1,4,sr) ) &
[2232]	1660	* heatflux_output_conversion(k) &
	1661	* flag
[1353]	1662	pts = 0.5_wp * ( pt(k,j-1,i) - hom(k,1,4,sr) + &
	1663	pt(k,j,i) - hom(k,1,4,sr) )
[1]	1664	sums_l(k,62,tn) = sums_l(k,62,tn) + &
	1665	( v(k,j,i) - hom(k,1,2,sr) ) &
[1353]	1666	* 0.5_wp * ( pt(k,j-1,i) - hom(k,1,4,sr) + &
[2037]	1667	pt(k,j,i) - hom(k,1,4,sr) ) &
[2232]	1668	* heatflux_output_conversion(k) &
	1669	* flag
[1]	1670	ENDDO
	1671	ENDDO
	1672	ENDDO
	1673	!
	1674	!-- Fluxes at the surface must be zero (e.g. due to the Prandtl-layer)
[1353]	1675	sums_l(nzb,58,tn) = 0.0_wp
	1676	sums_l(nzb,59,tn) = 0.0_wp
	1677	sums_l(nzb,60,tn) = 0.0_wp
	1678	sums_l(nzb,61,tn) = 0.0_wp
	1679	sums_l(nzb,62,tn) = 0.0_wp
	1680	sums_l(nzb,63,tn) = 0.0_wp
[1]	1681
	1682	ENDIF
[2073]	1683	!$OMP END PARALLEL
[87]	1684
	1685	!
[1365]	1686	!-- Collect current large scale advection and subsidence tendencies for
	1687	!-- data output
[1691]	1688	IF ( large_scale_forcing .AND. ( simulated_time > 0.0_wp ) ) THEN
[1365]	1689	!
	1690	!-- Interpolation in time of LSF_DATA
	1691	nt = 1
[1386]	1692	DO WHILE ( simulated_time - dt_3d > time_vert(nt) )
[1365]	1693	nt = nt + 1
	1694	ENDDO
[1386]	1695	IF ( simulated_time - dt_3d /= time_vert(nt) ) THEN
[1365]	1696	nt = nt - 1
	1697	ENDIF
	1698
[1386]	1699	fac = ( simulated_time - dt_3d - time_vert(nt) ) &
[1365]	1700	/ ( time_vert(nt+1)-time_vert(nt) )
	1701
	1702
	1703	DO k = nzb, nzt
[1382]	1704	sums_ls_l(k,0) = td_lsa_lpt(k,nt) &
	1705	+ fac * ( td_lsa_lpt(k,nt+1) - td_lsa_lpt(k,nt) )
	1706	sums_ls_l(k,1) = td_lsa_q(k,nt) &
	1707	+ fac * ( td_lsa_q(k,nt+1) - td_lsa_q(k,nt) )
[1365]	1708	ENDDO
	1709
[1382]	1710	sums_ls_l(nzt+1,0) = sums_ls_l(nzt,0)
	1711	sums_ls_l(nzt+1,1) = sums_ls_l(nzt,1)
	1712
[1365]	1713	IF ( large_scale_subsidence .AND. use_subsidence_tendencies ) THEN
	1714
	1715	DO k = nzb, nzt
[1382]	1716	sums_ls_l(k,2) = td_sub_lpt(k,nt) + fac * &
	1717	( td_sub_lpt(k,nt+1) - td_sub_lpt(k,nt) )
	1718	sums_ls_l(k,3) = td_sub_q(k,nt) + fac * &
	1719	( td_sub_q(k,nt+1) - td_sub_q(k,nt) )
[1365]	1720	ENDDO
	1721
[1382]	1722	sums_ls_l(nzt+1,2) = sums_ls_l(nzt,2)
	1723	sums_ls_l(nzt+1,3) = sums_ls_l(nzt,3)
	1724
[1365]	1725	ENDIF
	1726
	1727	ENDIF
	1728
[2232]	1729	tn = 0
[2073]	1730	!$OMP PARALLEL PRIVATE( i, j, k, tn )
[2232]	1731	!$ tn = omp_get_thread_num()
[1585]	1732	IF ( radiation .AND. radiation_scheme == 'rrtmg' ) THEN
	1733	!$OMP DO
	1734	DO i = nxl, nxr
	1735	DO j = nys, nyn
[2232]	1736	DO k = nzb+1, nzt+1
	1737	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_0(k,j,i), 0 ) )
	1738
[2270]	1739	sums_l(k,100,tn) = sums_l(k,100,tn) + rad_lw_in(k,j,i) &
[2232]	1740	* rmask(j,i,sr) * flag
[2270]	1741	sums_l(k,101,tn) = sums_l(k,101,tn) + rad_lw_out(k,j,i) &
[2232]	1742	* rmask(j,i,sr) * flag
[2270]	1743	sums_l(k,102,tn) = sums_l(k,102,tn) + rad_sw_in(k,j,i) &
[2232]	1744	* rmask(j,i,sr) * flag
[2270]	1745	sums_l(k,103,tn) = sums_l(k,103,tn) + rad_sw_out(k,j,i) &
[2232]	1746	* rmask(j,i,sr) * flag
[2270]	1747	sums_l(k,104,tn) = sums_l(k,104,tn) + rad_lw_cs_hr(k,j,i) &
[2232]	1748	* rmask(j,i,sr) * flag
[2270]	1749	sums_l(k,105,tn) = sums_l(k,105,tn) + rad_lw_hr(k,j,i) &
[2232]	1750	* rmask(j,i,sr) * flag
[2270]	1751	sums_l(k,106,tn) = sums_l(k,106,tn) + rad_sw_cs_hr(k,j,i) &
[2232]	1752	* rmask(j,i,sr) * flag
[2270]	1753	sums_l(k,107,tn) = sums_l(k,107,tn) + rad_sw_hr(k,j,i) &
[2232]	1754	* rmask(j,i,sr) * flag
[1585]	1755	ENDDO
	1756	ENDDO
	1757	ENDDO
	1758	ENDIF
[1365]	1759	!
[2817]	1760	!-- Calculate the gust module profiles
	1761	IF ( gust_module_enabled ) THEN
	1762	CALL gust_statistics( 'profiles', sr, tn, dots_max )
	1763	ENDIF
	1764	!
[87]	1765	!-- Calculate the user-defined profiles
	1766	CALL user_statistics( 'profiles', sr, tn )
[1]	1767	!$OMP END PARALLEL
	1768
	1769	!
	1770	!-- Summation of thread sums
	1771	IF ( threads_per_task > 1 ) THEN
	1772	DO i = 1, threads_per_task-1
	1773	sums_l(:,3,0) = sums_l(:,3,0) + sums_l(:,3,i)
	1774	sums_l(:,4:40,0) = sums_l(:,4:40,0) + sums_l(:,4:40,i)
[87]	1775	sums_l(:,45:pr_palm,0) = sums_l(:,45:pr_palm,0) + &
	1776	sums_l(:,45:pr_palm,i)
	1777	IF ( max_pr_user > 0 ) THEN
	1778	sums_l(:,pr_palm+1:pr_palm+max_pr_user,0) = &
	1779	sums_l(:,pr_palm+1:pr_palm+max_pr_user,0) + &
	1780	sums_l(:,pr_palm+1:pr_palm+max_pr_user,i)
	1781	ENDIF
[1]	1782	ENDDO
	1783	ENDIF
	1784
	1785	#if defined( __parallel )
[667]	1786
[1]	1787	!
	1788	!-- Compute total sum from local sums
[622]	1789	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[1365]	1790	CALL MPI_ALLREDUCE( sums_l(nzb,1,0), sums(nzb,1), ngp_sums, MPI_REAL, &
[1]	1791	MPI_SUM, comm2d, ierr )
[1365]	1792	IF ( large_scale_forcing ) THEN
	1793	CALL MPI_ALLREDUCE( sums_ls_l(nzb,2), sums(nzb,83), ngp_sums_ls, &
	1794	MPI_REAL, MPI_SUM, comm2d, ierr )
	1795	ENDIF
[1]	1796	#else
	1797	sums = sums_l(:,:,0)
[1365]	1798	IF ( large_scale_forcing ) THEN
	1799	sums(:,81:88) = sums_ls_l
	1800	ENDIF
[1]	1801	#endif
	1802
	1803	!
	1804	!-- Final values are obtained by division by the total number of grid points
	1805	!-- used for summation. After that store profiles.
[1738]	1806	!-- Check, if statistical regions do contain at least one grid point at the
	1807	!-- respective k-level, otherwise division by zero will lead to undefined
	1808	!-- values, which may cause e.g. problems with NetCDF output
[1]	1809	!-- Profiles:
	1810	DO k = nzb, nzt+1
[1738]	1811	sums(k,3) = sums(k,3) / ngp_2dh(sr)
	1812	sums(k,12:22) = sums(k,12:22) / ngp_2dh(sr)
	1813	sums(k,30:32) = sums(k,30:32) / ngp_2dh(sr)
	1814	sums(k,35:39) = sums(k,35:39) / ngp_2dh(sr)
	1815	sums(k,45:53) = sums(k,45:53) / ngp_2dh(sr)
	1816	sums(k,55:63) = sums(k,55:63) / ngp_2dh(sr)
	1817	sums(k,81:88) = sums(k,81:88) / ngp_2dh(sr)
[2270]	1818	sums(k,89:112) = sums(k,89:112) / ngp_2dh(sr)
	1819	sums(k,114) = sums(k,114) / ngp_2dh(sr)
	1820	sums(k,117) = sums(k,117) / ngp_2dh(sr)
[1738]	1821	IF ( ngp_2dh_s_inner(k,sr) /= 0 ) THEN
	1822	sums(k,8:11) = sums(k,8:11) / ngp_2dh_s_inner(k,sr)
	1823	sums(k,23:29) = sums(k,23:29) / ngp_2dh_s_inner(k,sr)
	1824	sums(k,33:34) = sums(k,33:34) / ngp_2dh_s_inner(k,sr)
	1825	sums(k,40) = sums(k,40) / ngp_2dh_s_inner(k,sr)
	1826	sums(k,54) = sums(k,54) / ngp_2dh_s_inner(k,sr)
	1827	sums(k,64) = sums(k,64) / ngp_2dh_s_inner(k,sr)
	1828	sums(k,70:80) = sums(k,70:80) / ngp_2dh_s_inner(k,sr)
[2270]	1829	sums(k,116) = sums(k,116) / ngp_2dh_s_inner(k,sr)
	1830	sums(k,118:pr_palm-2) = sums(k,118:pr_palm-2) / ngp_2dh_s_inner(k,sr)
[1738]	1831	ENDIF
[1]	1832	ENDDO
[667]	1833
[1]	1834	!-- u* and so on
[87]	1835	!-- As sums(nzb:nzb+3,pr_palm) are full 2D arrays (us, usws, vsws, ts) whose
[1]	1836	!-- size is always ( nx + 1 ) * ( ny + 1 ), defined at the first grid layer
	1837	!-- above the topography, they are being divided by ngp_2dh(sr)
[87]	1838	sums(nzb:nzb+3,pr_palm) = sums(nzb:nzb+3,pr_palm) / &
[1]	1839	ngp_2dh(sr)
[197]	1840	sums(nzb+12,pr_palm) = sums(nzb+12,pr_palm) / & ! qs
	1841	ngp_2dh(sr)
[1960]	1842	sums(nzb+13,pr_palm) = sums(nzb+13,pr_palm) / & ! ss
	1843	ngp_2dh(sr)
[2773]	1844	sums(nzb+14,pr_palm) = sums(nzb+14,pr_palm) / & ! surface temperature
	1845	ngp_2dh(sr)
[1]	1846	!-- eges, e*
[87]	1847	sums(nzb+4:nzb+5,pr_palm) = sums(nzb+4:nzb+5,pr_palm) / &
[132]	1848	ngp_3d(sr)
[1]	1849	!-- Old and new divergence
[87]	1850	sums(nzb+9:nzb+10,pr_palm) = sums(nzb+9:nzb+10,pr_palm) / &
[1]	1851	ngp_3d_inner(sr)
	1852
[87]	1853	!-- User-defined profiles
	1854	IF ( max_pr_user > 0 ) THEN
	1855	DO k = nzb, nzt+1
	1856	sums(k,pr_palm+1:pr_palm+max_pr_user) = &
	1857	sums(k,pr_palm+1:pr_palm+max_pr_user) / &
[132]	1858	ngp_2dh_s_inner(k,sr)
[87]	1859	ENDDO
	1860	ENDIF
[1007]	1861
[1]	1862	!
	1863	!-- Collect horizontal average in hom.
	1864	!-- Compute deduced averages (e.g. total heat flux)
	1865	hom(:,1,3,sr) = sums(:,3) ! w
	1866	hom(:,1,8,sr) = sums(:,8) ! e profiles 5-7 are initial profiles
	1867	hom(:,1,9,sr) = sums(:,9) ! km
	1868	hom(:,1,10,sr) = sums(:,10) ! kh
	1869	hom(:,1,11,sr) = sums(:,11) ! l
	1870	hom(:,1,12,sr) = sums(:,12) ! w"u"
	1871	hom(:,1,13,sr) = sums(:,13) ! wu
	1872	hom(:,1,14,sr) = sums(:,14) ! w"v"
	1873	hom(:,1,15,sr) = sums(:,15) ! wv
	1874	hom(:,1,16,sr) = sums(:,16) ! w"pt"
	1875	hom(:,1,17,sr) = sums(:,17) ! wpt
	1876	hom(:,1,18,sr) = sums(:,16) + sums(:,17) ! wpt
	1877	hom(:,1,19,sr) = sums(:,12) + sums(:,13) ! wu
	1878	hom(:,1,20,sr) = sums(:,14) + sums(:,15) ! wv
	1879	hom(:,1,21,sr) = sums(:,21) ! wptBC
	1880	hom(:,1,22,sr) = sums(:,16) + sums(:,21) ! wptBC
[96]	1881	! profile 24 is initial profile (sa)
	1882	! profiles 25-29 left empty for initial
[1]	1883	! profiles
	1884	hom(:,1,30,sr) = sums(:,30) ! u*2
	1885	hom(:,1,31,sr) = sums(:,31) ! v*2
	1886	hom(:,1,32,sr) = sums(:,32) ! w*2
	1887	hom(:,1,33,sr) = sums(:,33) ! pt*2
	1888	hom(:,1,34,sr) = sums(:,34) ! e*
	1889	hom(:,1,35,sr) = sums(:,35) ! w2pt
	1890	hom(:,1,36,sr) = sums(:,36) ! wpt2
	1891	hom(:,1,37,sr) = sums(:,37) ! we
	1892	hom(:,1,38,sr) = sums(:,38) ! w*3
[1353]	1893	hom(:,1,39,sr) = sums(:,38) / ( abs( sums(:,32) ) + 1E-20_wp )**1.5_wp ! Sw
[1]	1894	hom(:,1,40,sr) = sums(:,40) ! p
[531]	1895	hom(:,1,45,sr) = sums(:,45) ! w"vpt"
[1]	1896	hom(:,1,46,sr) = sums(:,46) ! wvpt
	1897	hom(:,1,47,sr) = sums(:,45) + sums(:,46) ! wvpt
	1898	hom(:,1,48,sr) = sums(:,48) ! w"q" (w"qv")
	1899	hom(:,1,49,sr) = sums(:,49) ! wq (wqv)
	1900	hom(:,1,50,sr) = sums(:,48) + sums(:,49) ! wq (wqv)
	1901	hom(:,1,51,sr) = sums(:,51) ! w"qv"
	1902	hom(:,1,52,sr) = sums(:,52) ! wqv
	1903	hom(:,1,53,sr) = sums(:,52) + sums(:,51) ! wq (wqv)
	1904	hom(:,1,54,sr) = sums(:,54) ! ql
	1905	hom(:,1,55,sr) = sums(:,55) ! wuu*/dz
	1906	hom(:,1,56,sr) = sums(:,56) ! wp/dz
[2031]	1907	hom(:,1,57,sr) = sums(:,57) ! ( w"e + w"p"/rho_ocean )/dz
[1]	1908	hom(:,1,58,sr) = sums(:,58) ! u"pt"
	1909	hom(:,1,59,sr) = sums(:,59) ! upt
	1910	hom(:,1,60,sr) = sums(:,58) + sums(:,59) ! upt_t
	1911	hom(:,1,61,sr) = sums(:,61) ! v"pt"
	1912	hom(:,1,62,sr) = sums(:,62) ! vpt
	1913	hom(:,1,63,sr) = sums(:,61) + sums(:,62) ! vpt_t
[2031]	1914	hom(:,1,64,sr) = sums(:,64) ! rho_ocean
[96]	1915	hom(:,1,65,sr) = sums(:,65) ! w"sa"
	1916	hom(:,1,66,sr) = sums(:,66) ! wsa
	1917	hom(:,1,67,sr) = sums(:,65) + sums(:,66) ! wsa
[106]	1918	hom(:,1,68,sr) = sums(:,68) ! wp
[2031]	1919	hom(:,1,69,sr) = sums(:,69) ! w"e + w"p"/rho_ocean
[197]	1920	hom(:,1,70,sr) = sums(:,70) ! q*2
[388]	1921	hom(:,1,71,sr) = sums(:,71) ! prho
[2252]	1922	hom(:,1,72,sr) = hyp * 1E-2_wp ! hyp in hPa
[2292]	1923	hom(:,1,123,sr) = sums(:,123) ! nc
[1053]	1924	hom(:,1,73,sr) = sums(:,73) ! nr
	1925	hom(:,1,74,sr) = sums(:,74) ! qr
	1926	hom(:,1,75,sr) = sums(:,75) ! qc
	1927	hom(:,1,76,sr) = sums(:,76) ! prr (precipitation rate)
[1179]	1928	! 77 is initial density profile
[1241]	1929	hom(:,1,78,sr) = ug ! ug
	1930	hom(:,1,79,sr) = vg ! vg
[1299]	1931	hom(:,1,80,sr) = w_subs ! w_subs
[1]	1932
[1365]	1933	IF ( large_scale_forcing ) THEN
[1382]	1934	hom(:,1,81,sr) = sums_ls_l(:,0) ! td_lsa_lpt
	1935	hom(:,1,82,sr) = sums_ls_l(:,1) ! td_lsa_q
[1365]	1936	IF ( use_subsidence_tendencies ) THEN
[1382]	1937	hom(:,1,83,sr) = sums_ls_l(:,2) ! td_sub_lpt
	1938	hom(:,1,84,sr) = sums_ls_l(:,3) ! td_sub_q
[1365]	1939	ELSE
[1382]	1940	hom(:,1,83,sr) = sums(:,83) ! td_sub_lpt
	1941	hom(:,1,84,sr) = sums(:,84) ! td_sub_q
[1365]	1942	ENDIF
[1382]	1943	hom(:,1,85,sr) = sums(:,85) ! td_nud_lpt
	1944	hom(:,1,86,sr) = sums(:,86) ! td_nud_q
	1945	hom(:,1,87,sr) = sums(:,87) ! td_nud_u
	1946	hom(:,1,88,sr) = sums(:,88) ! td_nud_v
[1365]	1947	ENDIF
	1948
[1551]	1949	IF ( land_surface ) THEN
	1950	hom(:,1,89,sr) = sums(:,89) ! t_soil
	1951	! 90 is initial t_soil profile
	1952	hom(:,1,91,sr) = sums(:,91) ! m_soil
	1953	! 92 is initial m_soil profile
[2270]	1954	hom(:,1,93,sr) = sums(:,93) ! ghf
	1955	hom(:,1,94,sr) = sums(:,94) ! qsws_liq
	1956	hom(:,1,95,sr) = sums(:,95) ! qsws_soil
	1957	hom(:,1,96,sr) = sums(:,96) ! qsws_veg
	1958	hom(:,1,97,sr) = sums(:,97) ! r_a
	1959	hom(:,1,98,sr) = sums(:,98) ! r_s
[1555]	1960
[1551]	1961	ENDIF
	1962
	1963	IF ( radiation ) THEN
[2270]	1964	hom(:,1,99,sr) = sums(:,99) ! rad_net
	1965	hom(:,1,100,sr) = sums(:,100) ! rad_lw_in
	1966	hom(:,1,101,sr) = sums(:,101) ! rad_lw_out
	1967	hom(:,1,102,sr) = sums(:,102) ! rad_sw_in
	1968	hom(:,1,103,sr) = sums(:,103) ! rad_sw_out
[1585]	1969
[1691]	1970	IF ( radiation_scheme == 'rrtmg' ) THEN
[2270]	1971	hom(:,1,104,sr) = sums(:,104) ! rad_lw_cs_hr
	1972	hom(:,1,105,sr) = sums(:,105) ! rad_lw_hr
	1973	hom(:,1,106,sr) = sums(:,106) ! rad_sw_cs_hr
	1974	hom(:,1,107,sr) = sums(:,107) ! rad_sw_hr
[1691]	1975
[2270]	1976	hom(:,1,108,sr) = sums(:,108) ! rrtm_aldif
	1977	hom(:,1,109,sr) = sums(:,109) ! rrtm_aldir
	1978	hom(:,1,110,sr) = sums(:,110) ! rrtm_asdif
	1979	hom(:,1,111,sr) = sums(:,111) ! rrtm_asdir
[1585]	1980	ENDIF
[1551]	1981	ENDIF
	1982
[2270]	1983	hom(:,1,112,sr) = sums(:,112) !: L
[1691]	1984
[1960]	1985	IF ( passive_scalar ) THEN
[2270]	1986	hom(:,1,117,sr) = sums(:,117) ! w"s"
	1987	hom(:,1,114,sr) = sums(:,114) ! ws
	1988	hom(:,1,118,sr) = sums(:,117) + sums(:,114) ! ws
	1989	hom(:,1,116,sr) = sums(:,116) ! s*2
[1960]	1990	ENDIF
	1991
[2270]	1992	hom(:,1,119,sr) = rho_air ! rho_air in Kg/m^3
	1993	hom(:,1,120,sr) = rho_air_zw ! rho_air_zw in Kg/m^3
[2037]	1994
[667]	1995	hom(:,1,pr_palm,sr) = sums(:,pr_palm)
[1]	1996	! u, w'u', w'v', t (in last profile)
	1997
[87]	1998	IF ( max_pr_user > 0 ) THEN ! user-defined profiles
	1999	hom(:,1,pr_palm+1:pr_palm+max_pr_user,sr) = &
	2000	sums(:,pr_palm+1:pr_palm+max_pr_user)
	2001	ENDIF
	2002
[1]	2003	!
	2004	!-- Determine the boundary layer height using two different schemes.
[94]	2005	!-- First scheme: Starting from the Earth's (Ocean's) surface, look for the
	2006	!-- first relative minimum (maximum) of the total heat flux.
	2007	!-- The corresponding height is assumed as the boundary layer height, if it
	2008	!-- is less than 1.5 times the height where the heat flux becomes negative
	2009	!-- (positive) for the first time.
[3003]	2010	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .OR. &
	2011	simulated_time_at_begin /= simulated_time ) THEN
[667]	2012
[3003]	2013	z_i(1) = 0.0_wp
	2014	first = .TRUE.
	2015
	2016	IF ( ocean ) THEN
	2017	DO k = nzt, nzb+1, -1
	2018	IF ( first .AND. hom(k,1,18,sr) < -1.0E-8_wp ) THEN
	2019	first = .FALSE.
	2020	height = zw(k)
[97]	2021	ENDIF
[3003]	2022	IF ( hom(k,1,18,sr) < -1.0E-8_wp .AND. &
	2023	hom(k-1,1,18,sr) > hom(k,1,18,sr) ) THEN
	2024	IF ( zw(k) < 1.5_wp * height ) THEN
	2025	z_i(1) = zw(k)
	2026	ELSE
	2027	z_i(1) = height
	2028	ENDIF
	2029	EXIT
[94]	2030	ENDIF
[3003]	2031	ENDDO
	2032	ELSE
	2033	DO k = nzb, nzt-1
	2034	IF ( first .AND. hom(k,1,18,sr) < -1.0E-8_wp ) THEN
	2035	first = .FALSE.
	2036	height = zw(k)
	2037	ENDIF
	2038	IF ( hom(k,1,18,sr) < -1.0E-8_wp .AND. &
	2039	hom(k+1,1,18,sr) > hom(k,1,18,sr) ) THEN
	2040	IF ( zw(k) < 1.5_wp * height ) THEN
	2041	z_i(1) = zw(k)
	2042	ELSE
	2043	z_i(1) = height
	2044	ENDIF
	2045	EXIT
	2046	ENDIF
	2047	ENDDO
	2048	ENDIF
[1]	2049
	2050	!
[3003]	2051	!-- Second scheme: Gradient scheme from Sullivan et al. (1998), modified
	2052	!-- by Uhlenbrock(2006). The boundary layer height is the height with the
	2053	!-- maximal local temperature gradient: starting from the second (the
	2054	!-- last but one) vertical gridpoint, the local gradient must be at least
	2055	!-- 0.2K/100m and greater than the next four gradients.
	2056	!-- WARNING: The threshold value of 0.2K/100m must be adjusted for the
	2057	!-- ocean case!
	2058	z_i(2) = 0.0_wp
	2059	DO k = nzb+1, nzt+1
	2060	dptdz(k) = ( hom(k,1,4,sr) - hom(k-1,1,4,sr) ) * ddzu(k)
	2061	ENDDO
	2062	dptdz_threshold = 0.2_wp / 100.0_wp
[291]	2063
[3003]	2064	IF ( ocean ) THEN
	2065	DO k = nzt+1, nzb+5, -1
	2066	IF ( dptdz(k) > dptdz_threshold .AND. &
	2067	dptdz(k) > dptdz(k-1) .AND. dptdz(k) > dptdz(k-2) .AND.&
	2068	dptdz(k) > dptdz(k-3) .AND. dptdz(k) > dptdz(k-4) ) THEN
	2069	z_i(2) = zw(k-1)
	2070	EXIT
	2071	ENDIF
	2072	ENDDO
	2073	ELSE
	2074	DO k = nzb+1, nzt-3
	2075	IF ( dptdz(k) > dptdz_threshold .AND. &
	2076	dptdz(k) > dptdz(k+1) .AND. dptdz(k) > dptdz(k+2) .AND.&
	2077	dptdz(k) > dptdz(k+3) .AND. dptdz(k) > dptdz(k+4) ) THEN
	2078	z_i(2) = zw(k-1)
	2079	EXIT
	2080	ENDIF
	2081	ENDDO
	2082	ENDIF
	2083
[97]	2084	ENDIF
[1]	2085
[87]	2086	hom(nzb+6,1,pr_palm,sr) = z_i(1)
	2087	hom(nzb+7,1,pr_palm,sr) = z_i(2)
[1]	2088
	2089	!
[1738]	2090	!-- Determine vertical index which is nearest to the mean surface level
	2091	!-- height of the respective statistic region
	2092	DO k = nzb, nzt
	2093	IF ( zw(k) >= mean_surface_level_height(sr) ) THEN
	2094	k_surface_level = k
	2095	EXIT
	2096	ENDIF
	2097	ENDDO
[3003]	2098
[1738]	2099	!
[1]	2100	!-- Computation of both the characteristic vertical velocity and
	2101	!-- the characteristic convective boundary layer temperature.
[1738]	2102	!-- The inversion height entering into the equation is defined with respect
	2103	!-- to the mean surface level height of the respective statistic region.
	2104	!-- The horizontal average at surface level index + 1 is input for the
	2105	!-- average temperature.
	2106	IF ( hom(k_surface_level,1,18,sr) > 1.0E-8_wp .AND. z_i(1) /= 0.0_wp )&
	2107	THEN
[2252]	2108	hom(nzb+8,1,pr_palm,sr) = &
[2037]	2109	( g / hom(k_surface_level+1,1,4,sr) * &
[2252]	2110	( hom(k_surface_level,1,18,sr) / &
	2111	( heatflux_output_conversion(nzb) * rho_air(nzb) ) ) &
[1738]	2112	* ABS( z_i(1) - mean_surface_level_height(sr) ) )**0.333333333_wp
[1]	2113	ELSE
[1353]	2114	hom(nzb+8,1,pr_palm,sr) = 0.0_wp
[1]	2115	ENDIF
	2116
[48]	2117	!
[2968]	2118	!-- Collect the time series quantities. Please note, timeseries quantities
	2119	!-- which are collected from horizontally averaged profiles, e.g. wpt
	2120	!-- or pt(zp), are treated specially. In case of elevated model surfaces,
	2121	!-- index nzb+1 might be within topography and data will be zero. Therefore,
	2122	!-- take value for the first atmosphere index, which is topo_min_level+1.
	2123	ts_value(1,sr) = hom(nzb+4,1,pr_palm,sr) ! E
	2124	ts_value(2,sr) = hom(nzb+5,1,pr_palm,sr) ! E*
[48]	2125	ts_value(3,sr) = dt_3d
[2968]	2126	ts_value(4,sr) = hom(nzb,1,pr_palm,sr) ! u*
	2127	ts_value(5,sr) = hom(nzb+3,1,pr_palm,sr) ! th*
[48]	2128	ts_value(6,sr) = u_max
	2129	ts_value(7,sr) = v_max
	2130	ts_value(8,sr) = w_max
[2968]	2131	ts_value(9,sr) = hom(nzb+10,1,pr_palm,sr) ! new divergence
	2132	ts_value(10,sr) = hom(nzb+9,1,pr_palm,sr) ! old Divergence
	2133	ts_value(11,sr) = hom(nzb+6,1,pr_palm,sr) ! z_i(1)
	2134	ts_value(12,sr) = hom(nzb+7,1,pr_palm,sr) ! z_i(2)
	2135	ts_value(13,sr) = hom(nzb+8,1,pr_palm,sr) ! w*
	2136	ts_value(14,sr) = hom(nzb,1,16,sr) ! w'pt' at k=0
	2137	ts_value(15,sr) = hom(topo_min_level+1,1,16,sr) ! w'pt' at k=1
	2138	ts_value(16,sr) = hom(topo_min_level+1,1,18,sr) ! wpt at k=1
	2139	ts_value(17,sr) = hom(nzb+14,1,pr_palm,sr) ! pt(0)
	2140	ts_value(18,sr) = hom(topo_min_level+1,1,4,sr) ! pt(zp)
	2141	ts_value(19,sr) = hom(nzb+1,1,pr_palm,sr) ! u'w' at k=0
	2142	ts_value(20,sr) = hom(nzb+2,1,pr_palm,sr) ! v'w' at k=0
	2143	ts_value(21,sr) = hom(nzb,1,48,sr) ! w"q" at k=0
[1709]	2144
	2145	IF ( .NOT. neutral ) THEN
[2270]	2146	ts_value(22,sr) = hom(nzb,1,112,sr) ! L
[48]	2147	ELSE
[1709]	2148	ts_value(22,sr) = 1.0E10_wp
[48]	2149	ENDIF
[1]	2150
[343]	2151	ts_value(23,sr) = hom(nzb+12,1,pr_palm,sr) ! q*
[1551]	2152
[1960]	2153	IF ( passive_scalar ) THEN
[2270]	2154	ts_value(24,sr) = hom(nzb+13,1,117,sr) ! w"s" ( to do ! )
[1960]	2155	ts_value(25,sr) = hom(nzb+13,1,pr_palm,sr) ! s*
	2156	ENDIF
	2157
[1]	2158	!
[1551]	2159	!-- Collect land surface model timeseries
	2160	IF ( land_surface ) THEN
[2270]	2161	ts_value(dots_soil ,sr) = hom(nzb,1,93,sr) ! ghf
	2162	ts_value(dots_soil+1,sr) = hom(nzb,1,94,sr) ! qsws_liq
	2163	ts_value(dots_soil+2,sr) = hom(nzb,1,95,sr) ! qsws_soil
	2164	ts_value(dots_soil+3,sr) = hom(nzb,1,96,sr) ! qsws_veg
	2165	ts_value(dots_soil+4,sr) = hom(nzb,1,97,sr) ! r_a
	2166	ts_value(dots_soil+5,sr) = hom(nzb,1,98,sr) ! r_s
[1551]	2167	ENDIF
	2168	!
	2169	!-- Collect radiation model timeseries
	2170	IF ( radiation ) THEN
[2270]	2171	ts_value(dots_rad,sr) = hom(nzb,1,99,sr) ! rad_net
	2172	ts_value(dots_rad+1,sr) = hom(nzb,1,100,sr) ! rad_lw_in
	2173	ts_value(dots_rad+2,sr) = hom(nzb,1,101,sr) ! rad_lw_out
	2174	ts_value(dots_rad+3,sr) = hom(nzb,1,102,sr) ! rad_sw_in
	2175	ts_value(dots_rad+4,sr) = hom(nzb,1,103,sr) ! rad_sw_out
[1585]	2176
	2177	IF ( radiation_scheme == 'rrtmg' ) THEN
[2270]	2178	ts_value(dots_rad+5,sr) = hom(nzb,1,108,sr) ! rrtm_aldif
	2179	ts_value(dots_rad+6,sr) = hom(nzb,1,109,sr) ! rrtm_aldir
	2180	ts_value(dots_rad+7,sr) = hom(nzb,1,110,sr) ! rrtm_asdif
	2181	ts_value(dots_rad+8,sr) = hom(nzb,1,111,sr) ! rrtm_asdir
[1585]	2182	ENDIF
	2183
[1551]	2184	ENDIF
	2185
	2186	!
[2817]	2187	!-- Calculate additional statistics provided by the gust module
	2188	IF ( gust_module_enabled ) THEN
	2189	CALL gust_statistics( 'time_series', sr, 0, dots_max )
	2190	ENDIF
	2191
	2192	!
[48]	2193	!-- Calculate additional statistics provided by the user interface
[87]	2194	CALL user_statistics( 'time_series', sr, 0 )
[1]	2195
[48]	2196	ENDDO ! loop of the subregions
	2197
[1]	2198	!
[1918]	2199	!-- If required, sum up horizontal averages for subsequent time averaging.
	2200	!-- Do not sum, if flow statistics is called before the first initial time step.
	2201	IF ( do_sum .AND. simulated_time /= 0.0_wp ) THEN
[1353]	2202	IF ( average_count_pr == 0 ) hom_sum = 0.0_wp
[1]	2203	hom_sum = hom_sum + hom(:,1,:,:)
	2204	average_count_pr = average_count_pr + 1
	2205	do_sum = .FALSE.
	2206	ENDIF
	2207
	2208	!
	2209	!-- Set flag for other UPs (e.g. output routines, but also buoyancy).
	2210	!-- This flag is reset after each time step in time_integration.
	2211	flow_statistics_called = .TRUE.
	2212
	2213	CALL cpu_log( log_point(10), 'flow_statistics', 'stop' )
	2214
	2215
	2216	END SUBROUTINE flow_statistics

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |