SUBROUTINE exchange_horiz( ar, nbgp_local) !--------------------------------------------------------------------------------! ! This file is part of PALM. ! ! PALM is free software: you can redistribute it and/or modify it under the terms ! of the GNU General Public License as published by the Free Software Foundation, ! either version 3 of the License, or (at your option) any later version. ! ! PALM is distributed in the hope that it will be useful, but WITHOUT ANY ! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR ! A PARTICULAR PURPOSE. See the GNU General Public License for more details. ! ! You should have received a copy of the GNU General Public License along with ! PALM. If not, see . ! ! Copyright 1997-2012 Leibniz University Hannover !--------------------------------------------------------------------------------! ! ! Current revisions: ! ----------------- ! ! ! Former revisions: ! ----------------- ! $Id: exchange_horiz.f90 1132 2013-04-12 14:35:30Z witha $ ! ! 1128 2013-04-12 06:19:32Z raasch ! modifications for asynchronous transfer, ! local variables req, wait_stat are global now, and have been moved to module ! pegrid ! ! 1113 2013-03-10 02:48:14Z raasch ! GPU-porting for single-core (1PE) mode ! ! 1036 2012-10-22 13:43:42Z raasch ! code put under GPL (PALM 3.9) ! ! 841 2012-02-28 12:29:49Z maronga ! Excluded routine from compilation of namelist_file_check ! ! 709 2011-03-30 09:31:40Z raasch ! formatting adjustments ! ! 707 2011-03-29 11:39:40Z raasch ! grid_level directly used as index for MPI data type arrays, ! bc_lr/ns replaced by bc_lr/ns_cyc ! ! 689 2011-02-20 19:31:12z gryschka ! Bugfix for some logical expressions ! (syntax was not compatible with all compilers) ! ! 683 2011-02-09 14:25:15Z raasch ! optional synchronous exchange (sendrecv) implemented, code partly reformatted ! ! 667 2010-12-23 12:06:00Z suehring/gryschka ! Dynamic exchange of ghost points with nbgp_local to ensure that no useless ! ghost points exchanged in case of multigrid. type_yz(0) and type_xz(0) ! used for normal grid, the remaining types used for the several grid levels. ! Exchange is done via MPI-Vectors with a dynamic value of ghost points which ! depend on the advection scheme. Exchange of left and right PEs is 10% faster ! with MPI-Vectors than without. ! ! 75 2007-03-22 09:54:05Z raasch ! Special cases for additional gridpoints along x or y in case of non-cyclic ! boundary conditions are not regarded any more ! ! RCS Log replace by Id keyword, revision history cleaned up ! ! Revision 1.16 2006/02/23 12:19:08 raasch ! anz_yz renamed ngp_yz ! ! Revision 1.1 1997/07/24 11:13:29 raasch ! Initial revision ! ! ! Description: ! ------------ ! Exchange of lateral boundary values (parallel computers) and cyclic ! lateral boundary conditions, respectively. !------------------------------------------------------------------------------! USE control_parameters USE cpulog USE indices USE interfaces USE pegrid IMPLICIT NONE INTEGER :: i, j, k, nbgp_local REAL, DIMENSION(nzb:nzt+1,nys-nbgp_local:nyn+nbgp_local, & nxl-nbgp_local:nxr+nbgp_local) :: ar #if ! defined( __check ) CALL cpu_log( log_point_s(2), 'exchange_horiz', 'start' ) #if defined( __parallel ) ! !-- Exchange in x-direction of lateral boundaries IF ( pdims(1) == 1 .OR. mg_switch_to_pe0 ) THEN ! !-- One-dimensional decomposition along y, boundary values can be exchanged !-- within the PE memory IF ( bc_lr_cyc ) THEN ar(:,:,nxl-nbgp_local:nxl-1) = ar(:,:,nxr-nbgp_local+1:nxr) ar(:,:,nxr+1:nxr+nbgp_local) = ar(:,:,nxl:nxl+nbgp_local-1) ENDIF ELSE IF ( synchronous_exchange ) THEN ! !-- Send left boundary, receive right one (synchronous) CALL MPI_SENDRECV( & ar(nzb,nys-nbgp_local,nxl), 1, type_yz(grid_level), pleft, 0, & ar(nzb,nys-nbgp_local,nxr+1), 1, type_yz(grid_level), pright, 0, & comm2d, status, ierr ) ! !-- Send right boundary, receive left one (synchronous) CALL MPI_SENDRECV( ar(nzb,nys-nbgp_local,nxr+1-nbgp_local), 1, & type_yz(grid_level), pright, 1, & ar(nzb,nys-nbgp_local,nxl-nbgp_local), 1, & type_yz(grid_level), pleft, 1, & comm2d, status, ierr ) ELSE ! !-- In case of background communication switched on, exchange is done !-- either along x or along y IF ( send_receive == 'lr' .OR. send_receive == 'al' ) THEN IF ( .NOT. sendrecv_in_background ) THEN req(1:4) = 0 req_count = 0 ENDIF ! !-- Send left boundary, receive right one (asynchronous) CALL MPI_ISEND( ar(nzb,nys-nbgp_local,nxl), 1, type_yz(grid_level), & pleft, req_count, comm2d, req(req_count+1), ierr ) CALL MPI_IRECV( ar(nzb,nys-nbgp_local,nxr+1), 1, type_yz(grid_level), & pright, req_count, comm2d, req(req_count+2), ierr ) ! !-- Send right boundary, receive left one (asynchronous) CALL MPI_ISEND( ar(nzb,nys-nbgp_local,nxr+1-nbgp_local), 1, & type_yz(grid_level), pright, req_count+1, comm2d, & req(req_count+3), ierr ) CALL MPI_IRECV( ar(nzb,nys-nbgp_local,nxl-nbgp_local), 1, & type_yz(grid_level), pleft, req_count+1, comm2d, & req(req_count+4), ierr ) IF ( .NOT. sendrecv_in_background ) THEN CALL MPI_WAITALL( 4, req, wait_stat, ierr ) ELSE req_count = req_count + 4 ENDIF ENDIF ENDIF ENDIF IF ( pdims(2) == 1 .OR. mg_switch_to_pe0 ) THEN ! !-- One-dimensional decomposition along x, boundary values can be exchanged !-- within the PE memory IF ( bc_ns_cyc ) THEN ar(:,nys-nbgp_local:nys-1,:) = ar(:,nyn-nbgp_local+1:nyn,:) ar(:,nyn+1:nyn+nbgp_local,:) = ar(:,nys:nys+nbgp_local-1,:) ENDIF ELSE IF ( synchronous_exchange ) THEN ! !-- Send front boundary, receive rear one (synchronous) CALL MPI_SENDRECV( & ar(nzb,nys,nxl-nbgp_local), 1, type_xz(grid_level), psouth, 0, & ar(nzb,nyn+1,nxl-nbgp_local), 1, type_xz(grid_level), pnorth, 0, & comm2d, status, ierr ) ! !-- Send rear boundary, receive front one (synchronous) CALL MPI_SENDRECV( ar(nzb,nyn-nbgp_local+1,nxl-nbgp_local), 1, & type_xz(grid_level), pnorth, 1, & ar(nzb,nys-nbgp_local,nxl-nbgp_local), 1, & type_xz(grid_level), psouth, 1, & comm2d, status, ierr ) ELSE ! !-- In case of background communication switched on, exchange is done !-- either along x or along y IF ( send_receive == 'lr' .OR. send_receive == 'al' ) THEN IF ( .NOT. sendrecv_in_background ) THEN req(1:4) = 0 req_count = 0 ENDIF ! !-- Send front boundary, receive rear one (asynchronous) CALL MPI_ISEND( ar(nzb,nys,nxl-nbgp_local), 1, type_xz(grid_level), & psouth, req_count, comm2d, req(req_count+1), ierr ) CALL MPI_IRECV( ar(nzb,nyn+1,nxl-nbgp_local), 1, type_xz(grid_level), & pnorth, req_count, comm2d, req(req_count+2), ierr ) ! !-- Send rear boundary, receive front one (asynchronous) CALL MPI_ISEND( ar(nzb,nyn-nbgp_local+1,nxl-nbgp_local), 1, & type_xz(grid_level), pnorth, req_count+1, comm2d, & req(req_count+3), ierr ) CALL MPI_IRECV( ar(nzb,nys-nbgp_local,nxl-nbgp_local), 1, & type_xz(grid_level), psouth, req_count+1, comm2d, & req(req_count+4), ierr ) IF ( .NOT. sendrecv_in_background ) THEN CALL MPI_WAITALL( 4, req, wait_stat, ierr ) ELSE req_count = req_count + 4 ENDIF ENDIF ENDIF ENDIF #else ! !-- Lateral boundary conditions in the non-parallel case. !-- Case dependent, because in GPU mode still not all arrays are on device. This !-- workaround has to be removed later. Also, since PGI compiler 12.5 has problems !-- with array syntax, explicit loops are used. IF ( bc_lr == 'cyclic' ) THEN IF ( on_device ) THEN !$acc kernels present( ar ) !$acc loop independent DO i = 0, nbgp_local-1 DO j = nys-nbgp_local, nyn+nbgp_local !$acc loop vector( 32 ) DO k = nzb, nzt+1 ar(k,j,nxl-nbgp_local+i) = ar(k,j,nxr-nbgp_local+1+i) ar(k,j,nxr+1+i) = ar(k,j,nxl+i) ENDDO ENDDO ENDDO !$acc end kernels ELSE ar(:,:,nxl-nbgp_local:nxl-1) = ar(:,:,nxr-nbgp_local+1:nxr) ar(:,:,nxr+1:nxr+nbgp_local) = ar(:,:,nxl:nxl+nbgp_local-1) ENDIF ENDIF IF ( bc_ns == 'cyclic' ) THEN IF ( on_device ) THEN !$acc kernels present( ar ) !$acc loop DO i = nxl-nbgp_local, nxr+nbgp_local !$acc loop independent DO j = 0, nbgp_local-1 !$acc loop vector( 32 ) DO k = nzb, nzt+1 ar(k,nys-nbgp_local+j,i) = ar(k,nyn-nbgp_local+1+j,i) ar(k,nyn+1+j,i) = ar(k,nys+j,i) ENDDO ENDDO ENDDO !$acc end kernels ELSE ar(:,nys-nbgp_local:nys-1,:) = ar(:,nyn-nbgp_local+1:nyn,:) ar(:,nyn+1:nyn+nbgp_local,:) = ar(:,nys:nys+nbgp_local-1,:) ENDIF ENDIF #endif CALL cpu_log( log_point_s(2), 'exchange_horiz', 'stop' ) #endif END SUBROUTINE exchange_horiz