Home

Context Navigation

data_output_profiles.f90 @ 753

Last change on this file since 753 was 392, checked in by raasch, 15 years ago

New:
---

Adapted for machine lck
(mrun, mbuild, subjob)

bc_lr/bc_ns in most subroutines replaced by LOGICAL variables bc_lr_cyc,
bc_ns_cyc for speed optimization
(check_parameters, diffusion_u, diffusion_v, diffusion_w, modules)

Additional timestep criterion in case of simulations with plant canopy (timestep)

Check for illegal entries in section_xy|xz|yz that exceed nz+1|ny+1|nx+1
(check_parameters)

Clipping of dvrp output implemented. Default colourtable for particles
implemented, particle attributes (color, dvrp_size) can be set with new
parameters particle_color, particle_dvrpsize, color_interval,
dvrpsize_interval (init_dvrp, data_output_dvrp, modules, user_data_output_dvrp).
Slicer attributes (dvrp) are set with new routine set_slicer_attributes_dvrp
and are controlled with existing parameters slicer_range_limits.
(set_slicer_attributes_dvrp)

Ocean atmosphere coupling allows to use independent precursor runs in order
to account for different spin-up times. The time when coupling has to be
started is given by new inipar parameter coupling_start_time. The precursor
ocean run has to be started using new mrun option "-y" in order to add
appendix "_O" to all output files.
(check_for_restart, check_parameters, data_output_2d, data_output_3d,
data_output_profiles, data_output_ptseries, data_output_spectra,
data_output_tseries, header, init_coupling, modules, mrun,
parin, read_var_list, surface_coupler, time_integration, write_var_list)

Polygon reduction for topography and ground plate isosurface. Reduction level
for buildings can be chosen with parameter cluster_size. (init_dvrp)

External pressure gradient (check_parameters, header, init_3d_model, modules,
parin, prognostic_equations, read_var_list, write_var_list)

New topography case 'single_street_canyon' (header, init_grid, modules, parin,
read_var_list, user_check_parameters, user_header, user_init_grid, write_var_list)

Option to predefine a target bulk velocity for conserve_volume_flow
(check_parameters, header, init_3d_model, modules, parin, read_var_list,
write_var_list)

Option for user defined 2D data output in xy cross sections at z=nzb+1
(data_output_2d, user_data_output_2d)

xy cross section output of surface heatfluxes (latent, sensible)
(average_3d_data, check_parameters, data_output_2d, modules, read_3d_binary,
sum_up_3d_data, write_3d_binary)

average_3d_data, check_for_restart, check_parameters, data_output_2d, data_output_3d, data_output_dvrp, data_output_profiles, data_output_ptseries, data_output_spectra, data_output_tseries, init_coupling, init_dvrp, init_grid, init_3d_model, header, mbuild, modules, mrun, package_parin, parin, prognostic_equations, read_3d_binary, read_var_list, subjob, surface_coupler, timestep, time_integration, user_check_parameters, user_data_output_2d, user_data_output_dvrp, user_header, user_init_grid, write_3d_binary, write_var_list

New: set_particle_attributes, set_slicer_attributes_dvrp

Changed:

lcmuk changed to lc to avoid problems with Intel compiler on sgi-ice
(poisfft)

For extended NetCDF files, the updated title attribute includes an update of
time_average_text where appropriate. (netcdf)

In case of restart runs without extension, initial profiles are not written
to NetCDF-file anymore. (data_output_profiles, modules, read_var_list, write_var_list)

Small change in formatting of the message handling routine concering the output in the
job protocoll. (message)

initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill', now
independent of turbulent_inflow (check_parameters, header, init_3d_model)

2 NetCDF error numbers changed. (data_output_3d)

A Link to the website appendix_a.html is printed for further information
about the possible errors. (message)

Temperature gradient criterion for estimating the boundary layer height
replaced by the gradient criterion of Sullivan et al. (1998). (flow_statistics)

NetCDF unit attribute in timeseries output in case of statistic regions added
(netcdf)

Output of NetCDF messages with aid of message handling routine.
(check_open, close_file, data_output_2d, data_output_3d,
data_output_profiles, data_output_ptseries, data_output_spectra,
data_output_tseries, netcdf, output_particles_netcdf)

Output of messages replaced by message handling routine.
(advec_particles, advec_s_bc, buoyancy, calc_spectra, check_for_restart,
check_open, coriolis, cpu_log, data_output_2d, data_output_3d, data_output_dvrp,
data_output_profiles, data_output_spectra, fft_xy, flow_statistics, header,
init_1d_model, init_3d_model, init_dvrp, init_grid, init_particles, init_pegrid,
netcdf, parin, plant_canopy_model, poisfft_hybrid, poismg, read_3d_binary,
read_var_list, surface_coupler, temperton_fft, timestep, user_actions,
user_data_output_dvrp, user_dvrp_coltab, user_init_grid, user_init_plant_canopy,
user_parin, user_read_restart_data, user_spectra )

Maximum number of tails is calculated from maximum number of particles and
skip_particles_for_tail (init_particles)

Value of vertical_particle_advection may differ for each particle group
(advec_particles, header, modules)

First constant in array den also defined as type double. (eqn_state_seawater)

Parameter dvrp_psize moved from particles_par to dvrp_graphics_par. (package_parin)

topography_grid_convention moved from userpar to inipar (check_parameters,
header, parin, read_var_list, user_check_parameters, user_header,
user_init_grid, user_parin, write_var_list)

Default value of grid_matching changed to strict.

Adjustments for runs on lcxt4 (necessary due to an software update on CRAY) and
for coupled runs on ibmy (mrun, subjob)

advec_particles, advec_s_bc, buoyancy, calc_spectra, check_for_restart, check_open, check_parameters, close_file, coriolis, cpu_log, data_output_2d, data_output_3d, data_output_dvrp, data_output_profiles, data_output_ptseries, data_output_spectra, data_output_tseries, eqn_state_seawater, fft_xy, flow_statistics, header, init_1d_model, init_3d_model, init_dvrp, init_grid, init_particles, init_pegrid, message, mrun, netcdf, output_particles_netcdf, package_parin, parin, plant_canopy_model, poisfft, poisfft_hybrid, poismg, read_3d_binary, read_var_list, sort_particles, subjob, user_check_parameters, user_header, user_init_grid, user_parin, surface_coupler, temperton_fft, timestep, user_actions, user_data_output_dvrp, user_dvrp_coltab, user_init_grid, user_init_plant_canopy, user_parin, user_read_restart_data, user_spectra, write_var_list

Errors:

Bugfix: Initial hydrostatic pressure profile in case of ocean runs is now
calculated in 5 iteration steps. (init_ocean)

Bugfix: wrong sign in buoyancy production of ocean part in case of not using
the reference density (only in 3D routine production_e) (production_e)

Bugfix: output of averaged 2d/3d quantities requires that an avaraging
interval has been set, respective error message is included (check_parameters)

Bugfix: Output on unit 14 only if requested by write_binary.
(user_last_actions)

Bugfix to avoid zero division by km_neutral (production_e)

Bugfix for extended NetCDF files: In order to avoid 'data mode' errors if
updated attributes are larger than their original size, NF90_PUT_ATT is called
in 'define mode' enclosed by NF90_REDEF and NF90_ENDDEF calls. This implies a
possible performance loss; an alternative strategy would be to ensure equal
attribute size in a job chain. (netcdf)

Bugfix: correction of initial volume flow for non-flat topography (init_3d_model)
Bugfix: zero initialization of arrays within buildings for 'cyclic_fill' (init_3d_model)

Bugfix: to_be_resorted => s_av for time-averaged scalars (data_output_2d, data_output_3d)

Bugfix: error in formatting the output (message)

Bugfix: avoid that ngp_2dh_s_inner becomes zero (init_3_model)

Typographical error: unit of wpt in dots_unit (modules)

Bugfix: error in check, if particles moved further than one subdomain length.
This check must not be applied for newly released particles. (advec_particles)

Bugfix: several tail counters are initialized, particle_tail_coordinates is
only written to file if its third index is > 0, arrays for tails are allocated
with a minimum size of 10 tails if there is no tail initially (init_particles,
advec_particles)

Bugfix: pressure included for profile output (check_parameters)

Bugfix: Type of count and count_rate changed to default INTEGER on NEC machines
(cpu_log)

Bugfix: output if particle time series only if particle advection is switched
on. (time_integration)

Bugfix: qsws was calculated in case of constant heatflux = .FALSE. (prandtl_fluxes)

Bugfix: averaging along z is not allowed for 2d quantities (e.g. u* and z0) (data_output_2d)

Typographical errors (netcdf)

If the inversion height calculated by the prerun is zero, inflow_damping_height
must be explicitly specified (init_3d_model)

Small bugfix concerning 3d 64bit netcdf output format (header)

Bugfix: dt_fixed removed from the restart file, because otherwise, no change
from a fixed to a variable timestep would be possible in restart runs.
(read_var_list, write_var_list)

Bugfix: initial setting of time_coupling in coupled restart runs (time_integration)

advec_particles, check_parameters, cpu_log, data_output_2d, data_output_3d, header, init_3d_model, init_particles, init_ocean, modules, netcdf, prandtl_fluxes, production_e, read_var_list, time_integration, user_last_actions, write_var_list

Property svn:keywords set to Id

File size: 25.7 KB

Rev	Line
[1]	1	SUBROUTINE data_output_profiles
	2
	3	!------------------------------------------------------------------------------!
[254]	4	! Current revisions:
[1]	5	! -----------------
[392]	6	!
	7	!
	8	! Former revisions:
	9	! -----------------
	10	! $Id: data_output_profiles.f90 392 2009-09-24 10:39:14Z raasch $
	11	!
	12	! 345 2009-07-01 14:37:56Z heinze
[345]	13	! In case of restart runs without extension, initial profiles are not written
	14	! to NetCDF-file anymore.
[291]	15	! simulated_time in NetCDF output replaced by time_since_reference_point.
[263]	16	! Output of NetCDF messages with aid of message handling routine.
[254]	17	! Output of messages replaced by message handling routine.
[1]	18	!
[198]	19	! 197 2008-09-16 15:29:03Z raasch
	20	! Time coordinate t=0 stored on netcdf-file only if an output is required for
	21	! this time for at least one of the profiles
	22	!
	23	! February 2007
[3]	24	! RCS Log replace by Id keyword, revision history cleaned up
	25	!
[90]	26	! 87 2007-05-22 15:46:47Z raasch
	27	! var_hom renamed pr_palm
	28	!
[1]	29	! Revision 1.18 2006/08/16 14:27:04 raasch
	30	! PRINT* statements for testing removed
	31	!
	32	! Revision 1.1 1997/09/12 06:28:48 raasch
	33	! Initial revision
	34	!
	35	!
	36	! Description:
	37	! ------------
	38	! Plot output of 1D-profiles for PROFIL
	39	!------------------------------------------------------------------------------!
	40
	41	USE control_parameters
	42	USE cpulog
	43	USE indices
	44	USE interfaces
	45	USE netcdf_control
	46	USE pegrid
	47	USE profil_parameter
	48	USE statistics
	49
	50	IMPLICIT NONE
	51
	52
	53	INTEGER :: i, id, ilc, ils, j, k, sr
	54	REAL :: uxma, uxmi
	55
	56
	57	!
	58	!-- If required, compute statistics
	59	IF ( .NOT. flow_statistics_called ) CALL flow_statistics
	60
	61	!
	62	!-- Flow_statistics has its own CPU time measurement
	63	CALL cpu_log( log_point(15), 'data_output_profiles', 'start' )
	64
	65	!
	66	!-- If required, compute temporal average
	67	IF ( averaging_interval_pr == 0.0 ) THEN
	68	hom_sum(:,:,:) = hom(:,1,:,:)
	69	ELSE
	70	IF ( average_count_pr > 0 ) THEN
	71	hom_sum = hom_sum / REAL( average_count_pr )
	72	ELSE
	73	!
	74	!-- This case may happen if dt_dopr is changed in the d3par-list of
	75	!-- a restart run
	76	RETURN
	77	ENDIF
	78	ENDIF
	79
	80
	81	IF ( myid == 0 ) THEN
	82
	83	!
	84	!-- Plot-output for each (sub-)region
	85
	86	!
	87	!-- Open file for profile output in NetCDF format
	88	IF ( netcdf_output ) THEN
	89	CALL check_open( 104 )
	90	ENDIF
	91
	92	!
	93	!-- Open PROFIL-output files for each (sub-)region
	94	IF ( profil_output ) THEN
	95	DO sr = 0, statistic_regions
	96	CALL check_open( 40 + sr )
	97	ENDDO
	98	ENDIF
	99
	100	!
	101	!-- Increment the counter for number of output times
	102	dopr_time_count = dopr_time_count + 1
	103
	104	!
	105	!-- Re-set to zero the counter for the number of profiles already written
	106	!-- at the current output time into the respective crosses
	107	cross_pnc_local = 0
	108
	109	!
	110	!-- Output of initial profiles
	111	IF ( dopr_time_count == 1 ) THEN
[345]	112
	113	IF ( .NOT. output_for_t0 ) THEN
[1]	114
[345]	115	IF ( netcdf_output ) THEN
	116	#if defined( __netcdf )
[1]	117	!
[345]	118	!-- Store initial time (t=0) to time axis, but only if an output
	119	!-- is required for at least one of the profiles
	120	DO i = 1, dopr_n
[197]	121	IF ( dopr_initial_index(i) /= 0 ) THEN
	122	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_time_pr, &
[345]	123	(/ 0.0 /), start = (/ 1 /), &
	124	count = (/ 1 /) )
	125	CALL handle_netcdf_error( 'data_output_profiles', 329 )
	126	output_for_t0 = .TRUE.
	127	EXIT
	128	ENDIF
	129	ENDDO
[1]	130
	131	!
[345]	132	!-- Store normalization factors
	133	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(1), & ! wpt0
	134	(/ hom_sum(nzb,18,normalizing_region) /), &
	135	start = (/ 1 /), count = (/ 1 /) )
	136	CALL handle_netcdf_error( 'data_output_profiles', 330 )
[1]	137
[345]	138	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(2), & ! ws2
	139	(/ hom_sum(nzb+8,pr_palm,normalizing_region)**2 /), &
	140	start = (/ 1 /), count = (/ 1 /) )
	141	CALL handle_netcdf_error( 'data_output_profiles', 331 )
	142	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(3), & ! tsw2
	143	(/ hom_sum(nzb+3,pr_palm,normalizing_region)**2 /), &
[1]	144	start = (/ 1 /), count = (/ 1 /) )
[345]	145	CALL handle_netcdf_error( 'data_output_profiles', 332 )
	146	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(4), & ! ws3
	147	(/ hom_sum(nzb+8,pr_palm,normalizing_region)**3 /), &
	148	start = (/ 1 /), count = (/ 1 /) )
	149	CALL handle_netcdf_error( 'data_output_profiles', 333 )
[1]	150
[345]	151	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(5), &!ws2tsw
	152	(/ hom_sum(nzb+8,pr_palm,normalizing_region)*3 &
	153	hom_sum(nzb+3,pr_palm,normalizing_region) /), &
	154	start = (/ 1 /), count = (/ 1 /) )
	155	CALL handle_netcdf_error( 'data_output_profiles', 334 )
[1]	156
[345]	157	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(6), &!wstsw2
	158	(/ hom_sum(nzb+8,pr_palm,normalizing_region) * &
	159	hom_sum(nzb+3,pr_palm,normalizing_region)**2 /), &
	160	start = (/ 1 /), count = (/ 1 /) )
	161	CALL handle_netcdf_error( 'data_output_profiles', 335 )
[1]	162
[345]	163	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(7), & ! z_i
	164	(/ hom_sum(nzb+6,pr_palm,normalizing_region) /), &
	165	start = (/ 1 /), count = (/ 1 /) )
	166	CALL handle_netcdf_error( 'data_output_profiles', 336 )
	167
[1]	168	#endif
[345]	169	ENDIF
[1]	170	!
[345]	171	!-- Loop over all 1D variables
	172	DO i = 1, dopr_n
[1]	173
[345]	174	IF ( dopr_initial_index(i) /= 0 ) THEN
[1]	175
	176	!
[345]	177	!-- Output for the individual (sub-)regions
	178	DO sr = 0, statistic_regions
[1]	179
[345]	180	IF ( profil_output ) THEN
	181	id = 40 + sr
[1]	182	!
[345]	183	!-- Write Label-Header
	184	WRITE ( id, 100 ) TRIM( data_output_pr(i) ), '(t=0)'
[1]	185	!
[345]	186	!-- Write total profile
	187	DO k = nzb, nzt+1
	188	WRITE ( id, 101 ) hom(k,2,dopr_initial_index(i),sr), &
	189	hom(k,1,dopr_initial_index(i),sr)
	190	ENDDO
[1]	191	!
[345]	192	!-- Write separation label
	193	WRITE ( id, 102 )
	194	ENDIF
[1]	195
[345]	196	IF ( netcdf_output ) THEN
[1]	197	#if defined( __netcdf )
	198	!
[345]	199	!-- Write data to netcdf file
	200	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_dopr(i,sr), &
	201	hom(nzb:nzt+1,1,dopr_initial_index(i),sr), &
	202	start = (/ 1, 1 /), &
	203	count = (/ nzt-nzb+2, 1 /) )
	204	CALL handle_netcdf_error( 'data_output_profiles', 337 )
[1]	205	#endif
[345]	206	ENDIF
[1]	207
[345]	208	ENDDO
[1]	209
[345]	210	IF ( profil_output ) THEN
[1]	211	!
[345]	212	!-- Determine indices for later NAMELIST-output (s. below)
	213	profile_number = profile_number + 1
	214	j = dopr_crossindex(i)
	215	IF ( j /= 0 ) THEN
	216	cross_profile_number_count(j) = &
	217	cross_profile_number_count(j) + 1
	218	k = cross_profile_number_count(j)
	219	cross_profile_numbers(k,j) = profile_number
[1]	220	!
[345]	221	!-- Initial profiles are always drawn as solid lines in
	222	!-- anti-background colour.
	223	cross_linecolors(k,j) = 1
	224	cross_linestyles(k,j) = 0
[1]	225	!
[345]	226	!-- If required, extend x-value range of the respective
	227	!-- cross, provided it has not been specified in &
	228	!-- check_parameters. Determination over all (sub-)regions.
	229	IF ( cross_uxmin(j) == 0.0 .AND. &
	230	cross_uxmax(j) == 0.0 ) THEN
[1]	231
[345]	232	DO sr = 0, statistic_regions
[1]	233
[345]	234	uxmi = &
	235	MINVAL( hom(:nz_do1d,1,dopr_initial_index(i),sr) )
	236
	237	uxma = &
	238	MAXVAL( hom(:nz_do1d,1,dopr_initial_index(i),sr) )
	239	!
	240	!-- When the value range of the first line in the
	241	!-- corresponding cross is determined, its value range
	242	!-- is simply adopted.
	243	IF ( cross_uxmin_computed(j) > &
	244	cross_uxmax_computed(j) ) THEN
	245	cross_uxmin_computed(j) = uxmi
	246	cross_uxmax_computed(j) = uxma
	247	ELSE
	248	cross_uxmin_computed(j) = &
	249	MIN( cross_uxmin_computed(j), uxmi )
	250	cross_uxmax_computed(j) = &
	251	MAX( cross_uxmax_computed(j), uxma )
	252	ENDIF
[1]	253
[345]	254	ENDDO
[1]	255
[345]	256	ENDIF
[1]	257	!
[345]	258	!-- If required, determine and note normalizing factors
	259	SELECT CASE ( cross_normalized_x(j) )
	260
	261	CASE ( 'ts2' )
	262	cross_normx_factor(k,j) = &
	263	( hom_sum(nzb+3,pr_palm,normalizing_region) )**2
	264	CASE ( 'wpt0' )
	265	cross_normx_factor(k,j) = &
	266	hom_sum(nzb,18,normalizing_region)
	267	CASE ( 'wsts2' )
	268	cross_normx_factor(k,j) = &
	269	hom_sum(nzb+8,pr_palm,normalizing_region) &
	270	* ( hom_sum(nzb+3,pr_palm,normalizing_region) )**2
	271	CASE ( 'ws2' )
	272	cross_normx_factor(k,j) = &
	273	( hom_sum(nzb+8,pr_palm,normalizing_region) )**2
	274	CASE ( 'ws2ts' )
	275	cross_normx_factor(k,j) = &
	276	( hom_sum(nzb+8,pr_palm,normalizing_region) )**2 &
	277	* hom_sum(nzb+3,pr_palm,normalizing_region)
	278	CASE ( 'ws3' )
	279	cross_normx_factor(k,j) = &
	280	( hom_sum(nzb+8,pr_palm,normalizing_region) )**3
[1]	281
[345]	282	END SELECT
[1]	283
[345]	284	SELECT CASE ( cross_normalized_y(j) )
	285
	286	CASE ( 'z_i' )
	287	cross_normy_factor(k,j) = &
	288	hom_sum(nzb+6,pr_palm,normalizing_region)
[1]	289
[345]	290	END SELECT
[1]	291
	292	!
[345]	293	!-- Check the normalizing factors for zeros and deactivate
	294	!-- the normalization, if required.
	295	IF ( cross_normx_factor(k,j) == 0.0 .OR. &
	296	cross_normy_factor(k,j) == 0.0 ) THEN
	297	WRITE( message_string, * ) 'data_output_profiles: ', &
	298	'normalizing cross ',j, ' is not possible ', &
	299	'since one of the & normalizing factors ', &
	300	'is zero! & cross_normx_factor(',k,',',j,') = ', &
	301	cross_normx_factor(k,j), &
	302	' & cross_normy_factor(',k,',',j,') = ', &
	303	cross_normy_factor(k,j)
	304	CALL message( 'data_output_profiles', 'PA0185',&
	305	0, 1, 0, 6, 0 )
	306	cross_normx_factor(k,j) = 1.0
	307	cross_normy_factor(k,j) = 1.0
	308	cross_normalized_x(j) = ' '
	309	cross_normalized_y(j) = ' '
	310	ENDIF
[1]	311
	312	!
[345]	313	!-- If required, extend normalized x-value range of the
	314	!-- respective cross, provided it has not been specified in
	315	!-- check_parameters. Determination over all (sub-)regions.
	316	IF ( cross_uxmin_normalized(j) == 0.0 .AND. &
	317	cross_uxmax_normalized(j) == 0.0 ) THEN
[1]	318
[345]	319	DO sr = 0, statistic_regions
[1]	320
[345]	321	uxmi = MINVAL( hom(:nz_do1d,1, &
	322	dopr_initial_index(i),sr) ) / &
	323	cross_normx_factor(k,j)
	324	uxma = MAXVAL( hom(:nz_do1d,1, &
	325	dopr_initial_index(i),sr) ) / &
	326	cross_normx_factor(k,j)
[1]	327	!
[345]	328	!-- When the value range of the first line in the
	329	!-- corresponding cross is determined, its value range
	330	!-- is simply adopted.
	331	IF ( cross_uxmin_normalized_computed(j) > &
	332	cross_uxmax_normalized_computed(j) ) THEN
	333	cross_uxmin_normalized_computed(j) = uxmi
	334	cross_uxmax_normalized_computed(j) = uxma
	335	ELSE
	336	cross_uxmin_normalized_computed(j) = &
	337	MIN( cross_uxmin_normalized_computed(j), uxmi )
	338	cross_uxmax_normalized_computed(j) = &
	339	MAX( cross_uxmax_normalized_computed(j), uxma )
	340	ENDIF
[1]	341
[345]	342	ENDDO
[1]	343
[345]	344	ENDIF
[1]	345
[345]	346	ENDIF ! Index determination
[1]	347
[345]	348	ENDIF ! profil output
[1]	349
[345]	350	ENDIF ! Initial profile available
[1]	351
[345]	352	ENDDO ! Loop over dopr_n for initial profiles
[1]	353
[345]	354	IF ( netcdf_output .AND. output_for_t0 ) THEN
	355	dopr_time_count = dopr_time_count + 1
	356	ENDIF
[1]	357
[345]	358	END IF
[1]	359	ENDIF ! Initial profiles
	360
	361	IF ( netcdf_output ) THEN
	362	#if defined( __netcdf )
[345]	363
[1]	364	!
	365	!-- Store time to time axis
[291]	366	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_time_pr, &
	367	(/ time_since_reference_point /), &
	368	start = (/ dopr_time_count /), &
[1]	369	count = (/ 1 /) )
[263]	370	CALL handle_netcdf_error( 'data_output_profiles', 338 )
[1]	371
	372	!
	373	!-- Store normalization factors
	374	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(1), & ! wpt0
	375	(/ hom_sum(nzb,18,normalizing_region) /), &
	376	start = (/ dopr_time_count /), &
	377	count = (/ 1 /) )
[263]	378	CALL handle_netcdf_error( 'data_output_profiles', 339 )
[1]	379
	380	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(2), & ! ws2
[87]	381	(/ hom_sum(nzb+8,pr_palm,normalizing_region)**2 /), &
[1]	382	start = (/ dopr_time_count /), &
	383	count = (/ 1 /) )
[263]	384	CALL handle_netcdf_error( 'data_output_profiles', 340 )
[1]	385
	386	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(3), & ! tsw2
[87]	387	(/ hom_sum(nzb+3,pr_palm,normalizing_region)**2 /), &
[1]	388	start = (/ dopr_time_count /), &
	389	count = (/ 1 /) )
[263]	390	CALL handle_netcdf_error( 'data_output_profiles', 341 )
[1]	391
	392	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(4), & ! ws3
[87]	393	(/ hom_sum(nzb+8,pr_palm,normalizing_region)**3 /), &
[1]	394	start = (/ dopr_time_count /), &
	395	count = (/ 1 /) )
[263]	396	CALL handle_netcdf_error( 'data_output_profiles', 342 )
[1]	397
	398	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(5), & ! ws2tsw
[87]	399	(/ hom_sum(nzb+8,pr_palm,normalizing_region)*3 &
	400	hom_sum(nzb+3,pr_palm,normalizing_region) /), &
[1]	401	start = (/ dopr_time_count /), &
	402	count = (/ 1 /) )
[263]	403	CALL handle_netcdf_error( 'data_output_profiles', 343 )
	404
[1]	405	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(6), & ! wstsw2
[87]	406	(/ hom_sum(nzb+8,pr_palm,normalizing_region) * &
	407	hom_sum(nzb+3,pr_palm,normalizing_region)**2 /), &
[1]	408	start = (/ dopr_time_count /), &
	409	count = (/ 1 /) )
[263]	410	CALL handle_netcdf_error( 'data_output_profiles', 344 )
[1]	411
	412	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(7), & ! z_i
[87]	413	(/ hom_sum(nzb+6,pr_palm,normalizing_region) /), &
[1]	414	start = (/ dopr_time_count /), &
	415	count = (/ 1 /) )
[263]	416	CALL handle_netcdf_error( 'data_output_profiles', 345 )
[1]	417	#endif
	418	ENDIF
	419
	420	!
	421	!-- Output of the individual (non-initial) profiles
	422	DO i = 1, dopr_n
	423
	424	!
	425	!-- Output for the individual (sub-)domains
	426	DO sr = 0, statistic_regions
	427
	428	IF ( profil_output ) THEN
	429	id = 40 + sr
	430	!
	431	!-- Write Label-Header
	432	WRITE ( id, 100 ) TRIM( dopr_label(i) ), simulated_time_chr
	433	!
	434	!-- Output of total profile
	435	DO k = nzb, nzt+1
	436	WRITE ( id, 101 ) hom(k,2,dopr_index(i),sr), &
	437	hom_sum(k,dopr_index(i),sr)
	438	ENDDO
	439	!
	440	!-- Write separation label
	441	WRITE ( id, 102 )
	442	ENDIF
	443
	444	IF ( netcdf_output ) THEN
	445	#if defined( __netcdf )
	446	!
	447	!-- Write data to netcdf file
	448	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_dopr(i,sr), &
	449	hom_sum(nzb:nzt+1,dopr_index(i),sr),&
	450	start = (/ 1, dopr_time_count /), &
	451	count = (/ nzt-nzb+2, 1 /) )
[263]	452	CALL handle_netcdf_error( 'data_output_profiles', 346 )
[1]	453	#endif
	454	ENDIF
	455
	456	ENDDO
	457
	458	IF ( profil_output ) THEN
	459	!
	460	!-- Determine profile number on file and note the data for later
	461	!-- NAMELIST output, if the respective profile is to be drawn by
	462	!-- PROFIL (if it shall not be drawn, the variable dopr_crossindex has
	463	!-- the value 0, otherwise the number of the coordinate cross)
	464	profile_number = profile_number + 1
	465	j = dopr_crossindex(i)
	466
	467	IF ( j /= 0 ) THEN
	468	cross_profile_number_count(j) = cross_profile_number_count(j) +1
	469	k = cross_profile_number_count(j)
	470	cross_pnc_local(j) = cross_pnc_local(j) +1
	471	cross_profile_numbers(k,j) = profile_number
	472	ilc = MOD( dopr_time_count, 10 )
	473	IF ( ilc == 0 ) ilc = 10
	474	cross_linecolors(k,j) = linecolors(ilc)
	475	ils = MOD( cross_pnc_local(j), 11 )
	476	IF ( ils == 0 ) ils = 11
	477	cross_linestyles(k,j) = linestyles(ils)
	478	!
	479	!-- If required, extend x-value range of the respective coordinate
	480	!-- cross, provided it has not been specified in check_parameters.
	481	!-- Determination over all (sub-)regions.
	482	IF ( cross_uxmin(j) == 0.0 .AND. cross_uxmax(j) == 0.0 ) THEN
	483
	484	DO sr = 0, statistic_regions
	485
	486	uxmi = MINVAL( hom_sum(:nz_do1d,dopr_index(i),sr) )
	487	uxma = MAXVAL( hom_sum(:nz_do1d,dopr_index(i),sr) )
	488	!
	489	!-- When the value range of the first line in the
	490	!-- corresponding cross is determined, its value range is
	491	!-- simply adopted.
	492	IF ( cross_uxmin_computed(j) > cross_uxmax_computed(j) ) &
	493	THEN
	494	cross_uxmin_computed(j) = uxmi
	495	cross_uxmax_computed(j) = uxma
	496	ELSE
	497	cross_uxmin_computed(j) = &
	498	MIN( cross_uxmin_computed(j), uxmi )
	499	cross_uxmax_computed(j) = &
	500	MAX( cross_uxmax_computed(j), uxma )
	501	ENDIF
	502
	503	ENDDO
	504
	505	ENDIF
	506	!
	507	!-- If required, store the normalizing factors
	508	SELECT CASE ( cross_normalized_x(j) )
	509
	510	CASE ( 'tsw2' )
	511	cross_normx_factor(k,j) = &
[87]	512	( hom_sum(nzb+11,pr_palm,normalizing_region) )**2
[1]	513	CASE ( 'wpt0' )
	514	cross_normx_factor(k,j) = &
	515	hom_sum(nzb,18,normalizing_region)
	516	CASE ( 'wstsw2' )
	517	cross_normx_factor(k,j) = &
[87]	518	hom_sum(nzb+8,pr_palm,normalizing_region) &
	519	* ( hom_sum(nzb+11,pr_palm,normalizing_region) )**2
[1]	520	CASE ( 'ws2' )
	521	cross_normx_factor(k,j) = &
[87]	522	( hom_sum(nzb+8,pr_palm,normalizing_region) )**2
[1]	523	CASE ( 'ws2tsw' )
	524	cross_normx_factor(k,j) = &
[87]	525	( hom_sum(nzb+8,pr_palm,normalizing_region) )**2&
	526	* hom_sum(nzb+11,pr_palm,normalizing_region)
[1]	527	CASE ( 'ws3' )
	528	cross_normx_factor(k,j) = &
[87]	529	( hom_sum(nzb+8,pr_palm,normalizing_region) )**3
[1]	530
	531	END SELECT
	532	SELECT CASE ( cross_normalized_y(j) )
	533
	534	CASE ( 'z_i' )
	535	cross_normy_factor(k,j) = &
[87]	536	hom_sum(nzb+6,pr_palm,normalizing_region)
[1]	537
	538	END SELECT
	539
	540	!
[254]	541	!-- Check the normalizing factors for zeros and deactivate
	542	!-- the normalization, if required.
[1]	543	IF ( cross_normx_factor(k,j) == 0.0 .OR. &
	544	cross_normy_factor(k,j) == 0.0 ) THEN
[274]	545	WRITE( message_string, * ) 'data_output_profiles: ', &
	546	'normalizing cross ',j, ' is not possible ', &
	547	'since one of the & normalizing factors ', &
	548	'is zero! & cross_normx_factor(',k,',',j,') = ', &
	549	cross_normx_factor(k,j), &
	550	' & cross_normy_factor(',k,',',j,') = ', &
	551	cross_normy_factor(k,j)
	552	CALL message( 'data_output_profiles', 'PA0185',&
	553	0, 1, 0, 6, 0 )
[254]	554	cross_normx_factor(k,j) = 1.0
	555	cross_normy_factor(k,j) = 1.0
	556	cross_normalized_x(j) = ' '
	557	cross_normalized_y(j) = ' '
[1]	558	ENDIF
	559
	560	!
	561	!-- If required, extend normalized x-value range of the respective
	562	!-- cross, provided it has not been specified in check_parameters.
	563	!-- Determination over all (sub-)regions.
	564	IF ( cross_uxmin_normalized(j) == 0.0 .AND. &
	565	cross_uxmax_normalized(j) == 0.0 ) THEN
	566
	567	DO sr = 0, statistic_regions
	568
	569	uxmi = MINVAL( hom(:nz_do1d,1,dopr_index(i),sr) ) / &
	570	cross_normx_factor(k,j)
	571	uxma = MAXVAL( hom(:nz_do1d,1,dopr_index(i),sr) ) / &
	572	cross_normx_factor(k,j)
	573	!
	574	!-- When the value range of the first line in the
	575	!-- corresponding cross is determined, its value range is
	576	!-- simply adopted.
	577	IF ( cross_uxmin_normalized_computed(j) > &
	578	cross_uxmax_normalized_computed(j) ) THEN
	579	cross_uxmin_normalized_computed(j) = uxmi
	580	cross_uxmax_normalized_computed(j) = uxma
	581	ELSE
	582	cross_uxmin_normalized_computed(j) = &
	583	MIN( cross_uxmin_normalized_computed(j), uxmi )
	584	cross_uxmax_normalized_computed(j) = &
	585	MAX( cross_uxmax_normalized_computed(j), uxma )
	586	ENDIF
	587
	588	ENDDO
	589
	590	ENDIF
	591
	592	ENDIF ! Index determination
	593
	594	ENDIF ! profil output
	595
	596	ENDDO ! Loop over dopr_n
	597
	598	ENDIF ! Output on PE0
	599
	600	!
	601	!-- If averaging has been done above, the summation counter must be re-set.
	602	IF ( averaging_interval_pr /= 0.0 ) THEN
	603	average_count_pr = 0
	604	ENDIF
	605
	606	CALL cpu_log( log_point(15), 'data_output_profiles','stop', 'nobarrier' )
	607
	608	!
	609	!-- Formats
	610	100 FORMAT ('#1 ',A,1X,A)
	611	101 FORMAT (E15.7,1X,E15.7)
	612	102 FORMAT ('NEXT')
	613
	614	END SUBROUTINE data_output_profiles

Note: See TracBrowser for help on using the repository browser.

Context Navigation

source: palm/trunk/SOURCE/data_output_profiles.f90 @ 753

Download in other formats: