Home

Context Navigation

data_output_dvrp.f90 @ 134

Last change on this file since 134 was 130, checked in by letzel, 17 years ago

DVRP output modifications:

The user can now visualize user-defined quantities using dvrp.

data_output_dvrp calls the new user_interface subroutine
user_data_output_dvrp in case of unknown variables (CASE DEFAULT).

Two instead of one digit are allowed to specify isosurface and slicer

variables with the parameter mode_dvrp.

Property svn:keywords set to Id

File size: 18.8 KB

Line
1	MODULE dvrp_color
2
3	USE dvrp_variables
4
5	IMPLICIT NONE
6
7	CONTAINS
8
9	SUBROUTINE color_dvrp( value, color )
10
11	REAL, INTENT(IN) :: value
12	REAL, INTENT(OUT) :: color(4)
13
14	REAL :: scale
15
16	scale = ( value - slicer_range_limits_dvrp(1,islice_dvrp) ) / &
17	( slicer_range_limits_dvrp(2,islice_dvrp) - &
18	slicer_range_limits_dvrp(1,islice_dvrp) )
19
20	scale = MODULO( 180.0 + 180.0 * scale, 360.0 )
21
22	color = (/ scale, 0.5, 1.0, 0.0 /)
23
24	END SUBROUTINE color_dvrp
25
26	END MODULE dvrp_color
27
28
29	RECURSIVE SUBROUTINE data_output_dvrp
30
31	!------------------------------------------------------------------------------!
32	! Actual revisions:
33	! -----------------
34	! allow two instead of one digit to specify isosurface and slicer variables
35	! for unknown variables (CASE DEFAULT) call new subroutine
36	! user_data_output_dvrp
37	! TEST: different colours for isosurfaces
38	! TEST: write statements
39	!
40	! Former revisions:
41	! -----------------
42	! $Id: data_output_dvrp.f90 130 2007-11-13 14:08:40Z letzel $
43	!
44	! 82 2007-04-16 15:40:52Z raasch
45	! Preprocessor strings for different linux clusters changed to "lc",
46	! routine local_flush is used for buffer flushing
47	!
48	! 75 2007-03-22 09:54:05Z raasch
49	! Particles-package is now part of the default code,
50	! moisture renamed humidity
51	!
52	! RCS Log replace by Id keyword, revision history cleaned up
53	!
54	! Revision 1.13 2006/02/23 10:25:12 raasch
55	! Former routine plot_dvrp renamed data_output_dvrp,
56	! Only a fraction of the particles may have a tail,
57	! pl.. replaced by do.., %size renamed %dvrp_psize
58	!
59	! Revision 1.1 2000/04/27 06:27:17 raasch
60	! Initial revision
61	!
62	!
63	! Description:
64	! ------------
65	! Plot of isosurface, particles and slicers with dvrp-software
66	!------------------------------------------------------------------------------!
67	#if defined( __dvrp_graphics )
68
69	USE arrays_3d
70	USE cloud_parameters
71	USE cpulog
72	USE DVRP
73	USE dvrp_color
74	USE dvrp_variables
75	USE grid_variables
76	USE indices
77	USE interfaces
78	USE particle_attributes
79	USE pegrid
80	USE control_parameters
81
82	IMPLICIT NONE
83
84	CHARACTER (LEN=2) :: section_chr
85	CHARACTER (LEN=6) :: output_variable
86	INTEGER :: i, j, k, l, m, n, nn, section_mode, tv, vn
87	INTEGER, DIMENSION(:), ALLOCATABLE :: p_c, p_t
88	REAL :: center(3), distance, slicer_position, surface_value
89	REAL, DIMENSION(:), ALLOCATABLE :: psize, p_x, p_y, p_z
90	REAL, DIMENSION(:,:,:), ALLOCATABLE :: local_pf
91
92
93	WRITE ( 9, * ) '*** myid=', myid, ' Anfang data_output_dvrp'
94	CALL local_flush( 9 )
95	CALL cpu_log( log_point(27), 'data_output_dvrp', 'start' )
96
97	!
98	!-- Loop over all output modes choosed
99	m = 1
100	tv = 0 ! threshold counter
101	islice_dvrp = 0 ! slice plane counter
102	DO WHILE ( mode_dvrp(m) /= ' ' )
103	!
104	!-- Update of the steering variables
105	IF ( .NOT. lock_steering_update ) THEN
106	!
107	!-- Set lock to avoid recursive calls of DVRP_STEERING_UPDATE
108	lock_steering_update = .TRUE.
109	! WRITE ( 9, * ) '*** myid=', myid, ' data_output_dvrp: vor steering_update'
110	! CALL local_flush( 9 )
111	CALL DVRP_STEERING_UPDATE( m-1, data_output_dvrp )
112	! WRITE ( 9, * ) '*** myid=', myid, ' data_output_dvrp: nach steering_update'
113	! CALL local_flush( 9 )
114	lock_steering_update = .FALSE.
115	ENDIF
116
117	!
118	!-- Determine the variable which shall be plotted (in case of slicers or
119	!-- isosurfaces)
120	IF ( mode_dvrp(m)(1:10) == 'isosurface' ) THEN
121	READ ( mode_dvrp(m), '(10X,I2)' ) vn
122	output_variable = do3d(0,vn)
123	tv = tv + 1
124	ELSEIF ( mode_dvrp(m)(1:6) == 'slicer' ) THEN
125	READ ( mode_dvrp(m), '(6X,I2)' ) vn
126	output_variable = do2d(0,vn)
127	l = MAX( 2, LEN_TRIM( do2d(0,vn) ) )
128	section_chr = do2d(0,vn)(l-1:l)
129	SELECT CASE ( section_chr )
130	CASE ( 'xy' )
131	section_mode = 2
132	slicer_position = zu(MIN( slicer_position_dvrp(m), nz_do3d ))
133	CASE ( 'xz' )
134	section_mode = 1
135	slicer_position = slicer_position_dvrp(m) * dy
136	CASE ( 'yz' )
137	section_mode = 0
138	slicer_position = slicer_position_dvrp(m) * dx
139	END SELECT
140	ENDIF
141
142	!
143	!-- Select the plot mode (in case of isosurface or slicer only if user has
144	!-- defined a variable which shall be plotted; otherwise do nothing)
145	IF ( mode_dvrp(m)(1:9) == 'particles' .AND. particle_advection .AND. &
146	simulated_time >= particle_advection_start ) THEN
147
148	! WRITE ( 9, * ) '*** myid=', myid, ' data_output_dvrp: anfang particles'
149	! CALL local_flush( 9 )
150	!
151	!-- DVRP-Calls for plotting particles:
152	CALL cpu_log( log_point_s(28), 'dvrp_particles', 'start' )
153
154	!
155	!-- Definition of characteristics of particle material
156	! CALL DVRP_MATERIAL_RGB( m-1, 1, 0.1, 0.7, 0.1, 0.0 )
157	CALL DVRP_MATERIAL_RGB( m-1, 1, 0.0, 0.0, 0.0, 0.0 )
158
159	!
160	!-- Move particle coordinates to one-dimensional arrays
161	IF ( .NOT. use_particle_tails ) THEN
162	!
163	!-- All particles are output
164	ALLOCATE( psize(number_of_particles), p_t(number_of_particles), &
165	p_c(number_of_particles), p_x(number_of_particles), &
166	p_y(number_of_particles), p_z(number_of_particles) )
167	psize = 0.0; p_t = 0; p_c = 0.0; p_x = 0.0; p_y = 0.0
168	p_z = 0.0;
169	psize = particles(1:number_of_particles)%dvrp_psize
170	p_x = particles(1:number_of_particles)%x * superelevation_x
171	p_y = particles(1:number_of_particles)%y * superelevation_y
172	p_z = particles(1:number_of_particles)%z * superelevation
173	p_c = particles(1:number_of_particles)%color
174	ELSE
175	!
176	!-- Particles have a tail
177	! WRITE (9,*) '--- before ALLOCATE simtime=',simulated_time,' #of_tails=', number_of_tails, &
178	! ' max#of_tp=', maximum_number_of_tailpoints
179	! CALL local_flush( 9 )
180	ALLOCATE( psize(number_of_tails), p_t(number_of_tails), &
181	p_c(number_of_tails*maximum_number_of_tailpoints), &
182	p_x(number_of_tails*maximum_number_of_tailpoints), &
183	p_y(number_of_tails*maximum_number_of_tailpoints), &
184	p_z(number_of_tails*maximum_number_of_tailpoints) )
185	! WRITE (9,*) '--- after ALLOCATE'
186	! CALL local_flush( 9 )
187	psize = 0.0; p_t = 0; p_c = 0.0; p_x = 0.0; p_y = 0.0
188	p_z = 0.0;
189	i = 0
190	k = 0
191	DO n = 1, number_of_particles
192	nn = particles(n)%tail_id
193	IF ( nn /= 0 ) THEN
194	k = k + 1
195	! IF ( simulated_time > 1338.0 ) THEN
196	! WRITE (9,*) '--- particle ',n,' tail_id=',nn,' #of_tp=',particles(n)%tailpoints
197	! CALL local_flush( 9 )
198	! ENDIF
199	DO j = 1, particles(n)%tailpoints
200	i = i + 1
201	p_x(i) = particle_tail_coordinates(j,1,nn) * &
202	superelevation_x
203	p_y(i) = particle_tail_coordinates(j,2,nn) * &
204	superelevation_y
205	p_z(i) = particle_tail_coordinates(j,3,nn) * &
206	superelevation
207	p_c(i) = particle_tail_coordinates(j,4,nn)
208	! IF ( simulated_time > 1338.0 ) THEN
209	! WRITE (9,*) '--- tp= ',i,' x=',p_x(i),' y=',p_y(i), &
210	! ' z=',p_z(i),' c=',p_c(i)
211	! CALL local_flush( 9 )
212	! ENDIF
213	ENDDO
214	psize(k) = particles(n)%dvrp_psize
215	p_t(k) = particles(n)%tailpoints - 1
216	! IF ( simulated_time > 1338.0 ) THEN
217	! WRITE (9,*) '--- t= ',k,' psize=',psize(k),' p_t=',p_t(k)
218	! CALL local_flush( 9 )
219	! ENDIF
220	ENDIF
221	ENDDO
222	! WRITE (9,*) '--- after locally storing the particle attributes'
223	! CALL local_flush( 9 )
224	ENDIF
225
226	!
227	!-- Compute and plot particles in dvr-format
228	IF ( uniform_particles .AND. .NOT. use_particle_tails ) THEN
229	!
230	!-- All particles have the same color. Use simple routine to set
231	!-- the particle attributes (produces less output data)
232	CALL DVRP_PARTICLES( m-1, p_x, p_y, p_z, psize )
233	ELSE
234	!
235	!-- Set color definitions
236	CALL user_dvrp_coltab( 'particles', 'none' )
237
238	CALL DVRP_COLORTABLE_HLS( m-1, 0, interval_values_dvrp, &
239	interval_h_dvrp, interval_l_dvrp, &
240	interval_s_dvrp, interval_a_dvrp )
241
242	IF ( .NOT. use_particle_tails ) THEN
243	CALL DVRP_PARTICLES( m-1, number_of_particles, p_x, p_y, p_z, &
244	3, psize, p_c, p_t )
245	ELSE
246	! WRITE (9,*) '--- before DVRP_PARTICLES'
247	! CALL local_flush( 9 )
248	CALL DVRP_PARTICLES( m-1, number_of_tails, p_x, p_y, p_z, 15, &
249	psize, p_c, p_t )
250	! WRITE (9,*) '--- after DVRP_PARTICLES'
251	! WRITE (9,*) 'm-1 = ',m-1
252	! WRITE (9,*) 'number_of_tails=', number_of_tails
253	! WRITE (9,*) 'p_x =', p_x
254	! WRITE (9,*) 'p_y =', p_y
255	! WRITE (9,*) 'p_z =', p_z
256	! WRITE (9,*) 'psize =', psize
257	! WRITE (9,*) 'p_c =', p_c
258	! WRITE (9,*) 'p_t =', p_t
259
260	! CALL local_flush( 9 )
261	ENDIF
262	ENDIF
263
264	CALL DVRP_VISUALIZE( m-1, 3, dvrp_filecount )
265	! WRITE ( 9, * ) '*** myid=', myid, ' data_output_dvrp: ende particles'
266	! CALL local_flush( 9 )
267
268	DEALLOCATE( psize, p_c, p_t, p_x, p_y, p_z )
269
270	CALL cpu_log( log_point_s(28), 'dvrp_particles', 'stop' )
271
272
273	ELSEIF ( ( mode_dvrp(m)(1:10) == 'isosurface' .OR. &
274	mode_dvrp(m)(1:6) == 'slicer' ) &
275	.AND. output_variable /= ' ' ) THEN
276
277	!
278	!-- Create an intermediate array, properly dimensioned for plot-output
279	ALLOCATE( local_pf(nxl:nxr+1,nys:nyn+1,nzb:nz_do3d) )
280
281	!
282	!-- Move original array to intermediate array
283	SELECT CASE ( output_variable )
284
285	CASE ( 'u', 'u_xy', 'u_xz', 'u_yz' )
286	DO i = nxl, nxr+1
287	DO j = nys, nyn+1
288	DO k = nzb, nz_do3d
289	local_pf(i,j,k) = u(k,j,i)
290	ENDDO
291	ENDDO
292	ENDDO
293	!
294	!-- Replace mirrored values at lower surface by real surface values
295	IF ( output_variable == 'u_xz' .OR. &
296	output_variable == 'u_yz' ) THEN
297	IF ( ibc_uv_b == 0 ) local_pf(:,:,nzb) = 0.0
298	ENDIF
299
300
301	CASE ( 'v', 'v_xy', 'v_xz', 'v_yz' )
302	DO i = nxl, nxr+1
303	DO j = nys, nyn+1
304	DO k = nzb, nz_do3d
305	local_pf(i,j,k) = v(k,j,i)
306	ENDDO
307	ENDDO
308	ENDDO
309	!
310	!-- Replace mirrored values at lower surface by real surface values
311	IF ( output_variable == 'v_xz' .OR. &
312	output_variable == 'v_yz' ) THEN
313	IF ( ibc_uv_b == 0 ) local_pf(:,:,nzb) = 0.0
314	ENDIF
315
316	CASE ( 'w', 'w_xy', 'w_xz', 'w_yz' )
317	DO i = nxl, nxr+1
318	DO j = nys, nyn+1
319	DO k = nzb, nz_do3d
320	local_pf(i,j,k) = w(k,j,i)
321	ENDDO
322	ENDDO
323	ENDDO
324	! Averaging for Langmuir circulation
325	! DO k = nzb, nz_do3d
326	! DO j = nys+1, nyn
327	! DO i = nxl, nxr+1
328	! local_pf(i,j,k) = 0.25 * local_pf(i,j-1,k) + &
329	! 0.50 * local_pf(i,j,k) + &
330	! 0.25 * local_pf(i,j+1,k)
331	! ENDDO
332	! ENDDO
333	! ENDDO
334
335	CASE ( 'p', 'p_xy', 'p_xz', 'p_yz' )
336	DO i = nxl, nxr+1
337	DO j = nys, nyn+1
338	DO k = nzb, nz_do3d
339	local_pf(i,j,k) = p(k,j,i)
340	ENDDO
341	ENDDO
342	ENDDO
343
344	CASE ( 'pt', 'pt_xy', 'pt_xz', 'pt_yz' )
345	IF ( .NOT. cloud_physics ) THEN
346	DO i = nxl, nxr+1
347	DO j = nys, nyn+1
348	DO k = nzb, nz_do3d
349	local_pf(i,j,k) = pt(k,j,i)
350	ENDDO
351	ENDDO
352	ENDDO
353	ELSE
354	DO i = nxl, nxr+1
355	DO j = nys, nyn+1
356	DO k = nzb, nz_do3d
357	local_pf(i,j,k) = pt(k,j,i) + l_d_cp * pt_d_t(k) * &
358	ql(k,j,i)
359	ENDDO
360	ENDDO
361	ENDDO
362	ENDIF
363
364	CASE ( 'q', 'q_xy', 'q_xz', 'q_yz' )
365	IF ( humidity .OR. passive_scalar ) THEN
366	DO i = nxl, nxr+1
367	DO j = nys, nyn+1
368	DO k = nzb, nz_do3d
369	local_pf(i,j,k) = q(k,j,i)
370	ENDDO
371	ENDDO
372	ENDDO
373	ELSE
374	IF ( myid == 0 ) THEN
375	PRINT*, '+++ data_output_dvrp: if humidity/passive_scalar = ', &
376	'FALSE output of ', output_variable, &
377	'is not provided'
378	ENDIF
379	ENDIF
380
381	CASE ( 'ql', 'ql_xy', 'ql_xz', 'ql_yz' )
382	IF ( cloud_physics .OR. cloud_droplets ) THEN
383	DO i = nxl, nxr+1
384	DO j = nys, nyn+1
385	DO k = nzb, nz_do3d
386	local_pf(i,j,k) = ql(k,j,i)
387	ENDDO
388	ENDDO
389	ENDDO
390	ELSE
391	IF ( myid == 0 ) THEN
392	PRINT*, '+++ data_output_dvrp: if cloud_physics = FALSE ', &
393	'output of ', output_variable, 'is not provided'
394	ENDIF
395	ENDIF
396
397	CASE ( 'u*_xy' )
398	DO i = nxl, nxr+1
399	DO j = nys, nyn+1
400	local_pf(i,j,nzb+1) = us(j,i)
401	ENDDO
402	ENDDO
403	slicer_position = zu(nzb+1)
404
405	CASE ( 't*_xy' )
406	DO i = nxl, nxr+1
407	DO j = nys, nyn+1
408	local_pf(i,j,nzb+1) = ts(j,i)
409	ENDDO
410	ENDDO
411	slicer_position = zu(nzb+1)
412
413
414	CASE DEFAULT
415	!
416	!-- The DEFAULT case is reached either if output_variable contains
417	!-- unsupported variable or if the user has coded a special case in
418	!-- the user interface. There, the subroutine user_data_output_dvrp
419	!-- checks which of these two conditions applies.
420	CALL user_data_output_dvrp( output_variable, local_pf )
421
422
423	END SELECT
424
425
426	IF ( mode_dvrp(m)(1:10) == 'isosurface' ) THEN
427
428	! WRITE ( 9, * ) '*** myid=', myid, ' data_output_dvrp: anfang isosurface'
429	! CALL local_flush( 9 )
430	!
431	!-- DVRP-Calls for plotting isosurfaces:
432	CALL cpu_log( log_point_s(26), 'dvrp_isosurface', 'start' )
433
434	!
435	!-- Definition of characteristics of isosurface material
436	!-- Preliminary settings for w!
437	IF ( output_variable == 'w' ) THEN
438	IF ( tv == 1 ) THEN
439	CALL DVRP_MATERIAL_RGB( m-1, 1, 0.8, 0.1, 0.1, 0.0 )
440	ELSE
441	CALL DVRP_MATERIAL_RGB( m-1, 1, 0.1, 0.1, 0.8, 0.0 )
442	ENDIF
443	ELSE
444	CALL DVRP_MATERIAL_RGB( m-1, 1, 0.9, 0.9, 0.9, 0.0 )
445	ENDIF
446
447	!
448	!-- Compute and plot isosurface in dvr-format
449	CALL DVRP_DATA( m-1, local_pf, 1, nx_dvrp, ny_dvrp, nz_dvrp, &
450	cyclic_dvrp, cyclic_dvrp, cyclic_dvrp )
451	CALL DVRP_THRESHOLD( m-1, threshold(tv) )
452	CALL DVRP_VISUALIZE( m-1, 1, dvrp_filecount )
453	! WRITE ( 9, * ) '*** myid=', myid, ' data_output_dvrp: ende isosurface'
454	! CALL local_flush( 9 )
455
456	CALL cpu_log( log_point_s(26), 'dvrp_isosurface', 'stop' )
457
458	ELSEIF ( mode_dvrp(m)(1:6) == 'slicer' ) THEN
459
460	! WRITE ( 9, * ) '*** myid=', myid, ' data_output_dvrp: anfang slicer'
461	! CALL local_flush( 9 )
462	!
463	!-- DVRP-Calls for plotting slicers:
464	CALL cpu_log( log_point_s(27), 'dvrp_slicer', 'start' )
465
466	!
467	!-- Material and color definitions
468	CALL DVRP_MATERIAL_RGB( m-1, 1, 0.0, 0.0, 0.0, 0.0 )
469
470	islice_dvrp = islice_dvrp + 1
471	! CALL DVRP_COLORFUNCTION( m-1, DVRP_CM_HLS, 25, &
472	! slicer_range_limits_dvrp(:,islice_dvrp), &
473	! color_dvrp )
474
475	CALL user_dvrp_coltab( 'slicer', output_variable )
476
477	CALL DVRP_COLORTABLE_HLS( m-1, 1, interval_values_dvrp, &
478	interval_h_dvrp, interval_l_dvrp, &
479	interval_s_dvrp, interval_a_dvrp )
480
481	!
482	!-- Compute and plot slicer in dvr-format
483	CALL DVRP_DATA( m-1, local_pf, 1, nx_dvrp, ny_dvrp, nz_dvrp, &
484	cyclic_dvrp, cyclic_dvrp, cyclic_dvrp )
485	! CALL DVRP_SLICER( m-1, section_mode, slicer_position )
486	CALL DVRP_SLICER( m-1, 2, 1.0 )
487	WRITE (9,*) 'nx_dvrp=', nx_dvrp
488	WRITE (9,*) 'ny_dvrp=', ny_dvrp
489	WRITE (9,*) 'nz_dvrp=', nz_dvrp
490	WRITE (9,*) 'section_mode=', section_mode
491	WRITE (9,*) 'slicer_position=', slicer_position
492	CALL local_flush( 9 )
493
494	CALL DVRP_VISUALIZE( m-1, 2, dvrp_filecount )
495
496	CALL cpu_log( log_point_s(27), 'dvrp_slicer', 'stop' )
497
498	! WRITE ( 9, * ) '*** myid=', myid, ' data_output_dvrp: ende slicer'
499	! CALL local_flush( 9 )
500	ENDIF
501
502	DEALLOCATE( local_pf )
503
504	ENDIF
505
506	m = m + 1
507
508	ENDDO
509
510	dvrp_filecount = dvrp_filecount + 1
511
512	CALL cpu_log( log_point(27), 'data_output_dvrp', 'stop' )
513	! WRITE ( 9, * ) '*** myid=', myid, ' Ende data_output_dvrp'
514	! CALL local_flush( 9 )
515
516	#endif
517	END SUBROUTINE data_output_dvrp

Note: See TracBrowser for help on using the repository browser.

Context Navigation

source: palm/trunk/SOURCE/data_output_dvrp.f90 @ 134

Download in other formats: