MODULE cpulog !--------------------------------------------------------------------------------! ! This file is part of PALM. ! ! PALM is free software: you can redistribute it and/or modify it under the terms ! of the GNU General Public License as published by the Free Software Foundation, ! either version 3 of the License, or (at your option) any later version. ! ! PALM is distributed in the hope that it will be useful, but WITHOUT ANY ! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR ! A PARTICULAR PURPOSE. See the GNU General Public License for more details. ! ! You should have received a copy of the GNU General Public License along with ! PALM. If not, see . ! ! Copyright 1997-2014 Leibniz Universitaet Hannover !--------------------------------------------------------------------------------! ! ! Current revisions: ! ----------------- ! ! ! Former revisions: ! ----------------- ! $Id: cpulog.f90 1323 2014-03-20 17:09:54Z maronga $ ! ! 1322 2014-03-20 16:38:49Z raasch ! REAL functions provided with KIND-attribute ! ! 1320 2014-03-20 08:40:49Z raasch ! ONLY-attribute added to USE-statements, ! kind-parameters added to all INTEGER and REAL declaration statements, ! kinds are defined in new module kinds, ! revision history before 2012 removed, ! comment fields (!:) to be used for variable explanations added to ! all variable declaration statements ! ! 1318 2014-03-17 13:35:16Z raasch ! former files/routines cpu_log and cpu_statistics combined to one module, ! which also includes the former data module cpulog from the modules-file ! ! 1036 2012-10-22 13:43:42Z raasch ! code put under GPL (PALM 3.9) ! ! Revision 1.1 1997/07/24 11:12:29 raasch ! Initial revision ! ! ! Description: ! ------------ ! Cpu-time measurements for any program part whatever. !------------------------------------------------------------------------------! USE control_parameters, & ONLY: message_string, nr_timesteps_this_run, run_description_header, & synchronous_exchange USE indices, & ONLY: nx, ny, nz USE kinds USE pegrid IMPLICIT NONE PRIVATE PUBLIC cpu_log, cpu_log_barrierwait, cpu_log_nowait, cpu_statistics, & initial_wallclock_time, log_point, log_point_s INTERFACE cpu_log MODULE PROCEDURE cpu_log END INTERFACE cpu_log INTERFACE cpu_statistics MODULE PROCEDURE cpu_statistics END INTERFACE cpu_statistics INTEGER(iwp), PARAMETER :: cpu_log_continue = 0 !: INTEGER(iwp), PARAMETER :: cpu_log_pause = 1 !: INTEGER(iwp), PARAMETER :: cpu_log_start = 2 !: INTEGER(iwp), PARAMETER :: cpu_log_stop = 3 !: LOGICAL :: cpu_log_barrierwait = .FALSE. !: LOGICAL, PARAMETER :: cpu_log_nowait = .FALSE. !: REAL(wp) :: initial_wallclock_time !: TYPE logpoint REAL(wp) :: isum !: REAL(wp) :: ivect !: REAL(wp) :: mean !: REAL(wp) :: mtime !: REAL(wp) :: mtimevec !: REAL(wp) :: sum !: REAL(wp) :: vector !: INTEGER(iwp) :: counts !: CHARACTER (LEN=20) :: place !: END TYPE logpoint TYPE(logpoint), DIMENSION(100) :: log_point = logpoint( 0.0, 0.0, 0.0, & 0.0, 0.0, 0.0, 0.0, 0, ' ' ), & log_point_s = logpoint( 0.0, 0.0, 0.0, & 0.0, 0.0, 0.0, 0.0, 0, ' ' ) SAVE CONTAINS SUBROUTINE cpu_log( log_event, place, modus, barrierwait ) IMPLICIT NONE CHARACTER (LEN=*) :: modus !: CHARACTER (LEN=*) :: place !: LOGICAL :: wait_allowed !: LOGICAL, OPTIONAL :: barrierwait !: LOGICAL, SAVE :: first = .TRUE. !: REAL(wp) :: mtime = 0.0 !: REAL(wp) :: mtimevec = 0.0 !: TYPE(logpoint) :: log_event !: #if defined( __lc ) || defined( __decalpha ) INTEGER(idp) :: count !: INTEGER(idp) :: count_rate !: #elif defined( __nec ) INTEGER(iwp) :: count !: INTEGER(iwp) :: count_rate !: #elif defined( __ibm ) INTEGER(idp) :: IRTC !: #endif ! !-- Initialize and check, respectively, point of measurement IF ( log_event%place == ' ' ) THEN log_event%place = place ELSEIF ( log_event%place /= place ) THEN WRITE( message_string, * ) 'wrong argument & expected: ', & TRIM(log_event%place), ' given: ', TRIM( place ) CALL message( 'cpu_log', 'PA0174', 1, 2, 0, 6, 0 ) ENDIF ! !-- Determine, if barriers are allowed to set IF ( PRESENT( barrierwait ) ) THEN wait_allowed = barrierwait ELSE wait_allowed = .TRUE. ENDIF ! !-- MPI barrier, if requested, in order to avoid measuring wait times !-- caused by MPI routines waiting for other MPI routines of other !-- PEs that have not yet finished #if defined( __parallel ) IF ( cpu_log_barrierwait .AND. wait_allowed .AND. & ( modus == 'start' .OR. modus == 'continue' ) ) THEN CALL MPI_BARRIER( comm2d, ierr ) ENDIF #endif ! !-- Take current time #if defined( __lc ) || defined( __decalpha ) || defined( __nec ) CALL SYSTEM_CLOCK( count, count_rate ) mtime = REAL( count, KIND=wp ) / REAL( count_rate, KIND=wp ) #elif defined( __ibm ) mtime = IRTC( ) * 1E-9_wp #else message_string = 'no time measurement defined on this host' CALL message( 'cpu_log', 'PA0175', 1, 2, 0, 6, 0 ) #endif ! !-- Start, stop or pause measurement IF ( modus == 'start' .OR. modus == 'continue' ) THEN log_event%mtime = mtime log_event%mtimevec = mtimevec ELSEIF ( modus == 'pause' ) THEN IF ( ( mtime - log_event%mtime ) < 0.0 .AND. first ) THEN WRITE( message_string, * ) 'negative time interval occured', & ' &PE',myid,' L=PAUSE "',TRIM(log_event%place), & '" new=', mtime,' last=',log_event%mtime CALL message( 'cpu_log', 'PA0176', 0, 1, -1, 6, 0 ) first = .FALSE. ENDIF log_event%isum = log_event%isum + mtime - log_event%mtime log_event%ivect = log_event%ivect + mtimevec - log_event%mtimevec ELSEIF ( modus == 'stop' ) THEN IF ( ( mtime - log_event%mtime + log_event%isum ) < 0.0 .AND. & first ) THEN WRITE( message_string, * ) 'negative time interval occured', & ' &PE',myid,' L=STOP "',TRIM(log_event%place),'" new=', & mtime,' last=',log_event%mtime,' isum=',log_event%isum CALL message( 'cpu_log', 'PA0177', 0, 1, -1, 6, 0 ) first = .FALSE. ENDIF log_event%mtime = mtime - log_event%mtime + log_event%isum log_event%mtimevec = mtimevec - log_event%mtimevec + log_event%ivect log_event%sum = log_event%sum + log_event%mtime IF ( log_event%sum < 0.0 .AND. first ) THEN WRITE( message_string, * ) 'negative time interval occured', & ' &PE',myid,' L=STOP "',TRIM(log_event%place),'" sum=', & log_event%sum,' mtime=',log_event%mtime CALL message( 'cpu_log', 'PA0178', 0, 1, -1, 6, 0 ) first = .FALSE. ENDIF log_event%vector = log_event%vector + log_event%mtimevec log_event%counts = log_event%counts + 1 log_event%isum = 0.0 log_event%ivect = 0.0 ELSE message_string = 'unknown modus of time measurement: ' // TRIM( modus ) CALL message( 'cpu_log', 'PA0179', 0, 1, -1, 6, 0 ) ENDIF END SUBROUTINE cpu_log SUBROUTINE cpu_statistics !------------------------------------------------------------------------------! ! Description: ! ------------ ! Analysis and output of the cpu-times measured. All PE results are collected ! on PE0 in order to calculate the mean cpu-time over all PEs and other ! statistics. The output is sorted according to the amount of cpu-time consumed ! and output on PE0. !------------------------------------------------------------------------------! IMPLICIT NONE INTEGER(iwp) :: i !: INTEGER(iwp) :: ii(1) !: INTEGER(iwp) :: iii !: INTEGER(iwp) :: sender !: REAL(wp) :: average_cputime !: REAL(wp), SAVE :: norm = 1.0 !: REAL(wp), DIMENSION(:), ALLOCATABLE :: pe_max !: REAL(wp), DIMENSION(:), ALLOCATABLE :: pe_min !: REAL(wp), DIMENSION(:), ALLOCATABLE :: pe_rms !: REAL(wp), DIMENSION(:), ALLOCATABLE :: sum !: REAL(wp), DIMENSION(:,:), ALLOCATABLE :: pe_log_points !: ! !-- Compute cpu-times in seconds log_point%mtime = log_point%mtime / norm log_point%sum = log_point%sum / norm log_point%vector = log_point%vector / norm WHERE ( log_point%counts /= 0 ) log_point%mean = log_point%sum / log_point%counts END WHERE ! !-- Collect cpu-times from all PEs and calculate statistics IF ( myid == 0 ) THEN ! !-- Allocate and initialize temporary arrays needed for statistics ALLOCATE( pe_max( SIZE( log_point ) ), pe_min( SIZE( log_point ) ), & pe_rms( SIZE( log_point ) ), & pe_log_points( SIZE( log_point ), 0:numprocs-1 ) ) pe_min = log_point%sum pe_max = log_point%sum ! need to be set in case of 1 PE pe_rms = 0.0 #if defined( __parallel ) ! !-- Receive data from all PEs DO i = 1, numprocs-1 CALL MPI_RECV( pe_max(1), SIZE( log_point ), MPI_REAL, & i, i, comm2d, status, ierr ) sender = status(MPI_SOURCE) pe_log_points(:,sender) = pe_max ENDDO pe_log_points(:,0) = log_point%sum ! Results from PE0 ! !-- Calculate mean of all PEs, store it on log_point%sum !-- and find minimum and maximum DO iii = 1, SIZE( log_point ) DO i = 1, numprocs-1 log_point(iii)%sum = log_point(iii)%sum + pe_log_points(iii,i) pe_min(iii) = MIN( pe_min(iii), pe_log_points(iii,i) ) pe_max(iii) = MAX( pe_max(iii), pe_log_points(iii,i) ) ENDDO log_point(iii)%sum = log_point(iii)%sum / numprocs ! !-- Calculate rms DO i = 0, numprocs-1 pe_rms(iii) = pe_rms(iii) + ( & pe_log_points(iii,i) - log_point(iii)%sum & )**2 ENDDO pe_rms(iii) = SQRT( pe_rms(iii) / numprocs ) ENDDO ELSE ! !-- Send data to PE0 (pe_max is used as temporary storage to send !-- the data in order to avoid sending the data type log) ALLOCATE( pe_max( SIZE( log_point ) ) ) pe_max = log_point%sum CALL MPI_SEND( pe_max(1), SIZE( log_point ), MPI_REAL, 0, myid, comm2d, & ierr ) #endif ENDIF ! !-- Write cpu-times IF ( myid == 0 ) THEN ! !-- Re-store sums ALLOCATE( sum( SIZE( log_point ) ) ) WHERE ( log_point%counts /= 0 ) sum = log_point%sum ELSEWHERE sum = -1.0 ENDWHERE ! !-- Get total time in order to calculate CPU-time per gridpoint and timestep IF ( nr_timesteps_this_run /= 0 ) THEN average_cputime = log_point(1)%sum / REAL( (nx+1) * (ny+1) * nz, KIND=wp ) / & REAL( nr_timesteps_this_run, KIND=wp ) * 1E6_wp ! in micro-sec ELSE average_cputime = -1.0 ENDIF ! !-- Write cpu-times sorted by size CALL check_open( 18 ) #if defined( __parallel ) WRITE ( 18, 100 ) TRIM( run_description_header ), & numprocs * threads_per_task, pdims(1), pdims(2), & threads_per_task, nx+1, ny+1, nz, nr_timesteps_this_run, & average_cputime IF ( num_acc_per_node /= 0 ) WRITE ( 18, 108 ) num_acc_per_node WRITE ( 18, 110 ) #else WRITE ( 18, 100 ) TRIM( run_description_header ), & numprocs * threads_per_task, 1, 1, & threads_per_task, nx+1, ny+1, nz, nr_timesteps_this_run, & average_cputime IF ( num_acc_per_node /= 0 ) WRITE ( 18, 109 ) num_acc_per_node WRITE ( 18, 110 ) #endif DO ii = MAXLOC( sum ) i = ii(1) IF ( sum(i) /= -1.0 ) THEN WRITE ( 18, 102 ) & log_point(i)%place, log_point(i)%sum, & log_point(i)%sum / log_point(1)%sum * 100.0, & log_point(i)%counts, pe_min(i), pe_max(i), pe_rms(i) sum(i) = -1.0 ELSE EXIT ENDIF ENDDO ENDIF ! !-- The same procedure again for the individual measurements. ! !-- Compute cpu-times in seconds log_point_s%mtime = log_point_s%mtime / norm log_point_s%sum = log_point_s%sum / norm log_point_s%vector = log_point_s%vector / norm WHERE ( log_point_s%counts /= 0 ) log_point_s%mean = log_point_s%sum / log_point_s%counts END WHERE ! !-- Collect cpu-times from all PEs and calculate statistics #if defined( __parallel ) ! !-- Set barrier in order to avoid that PE0 receives log_point_s-data !-- while still busy with receiving log_point-data (see above) CALL MPI_BARRIER( comm2d, ierr ) #endif IF ( myid == 0 ) THEN ! !-- Initialize temporary arrays needed for statistics pe_min = log_point_s%sum pe_max = log_point_s%sum ! need to be set in case of 1 PE pe_rms = 0.0 #if defined( __parallel ) ! !-- Receive data from all PEs DO i = 1, numprocs-1 CALL MPI_RECV( pe_max(1), SIZE( log_point ), MPI_REAL, & MPI_ANY_SOURCE, MPI_ANY_TAG, comm2d, status, ierr ) sender = status(MPI_SOURCE) pe_log_points(:,sender) = pe_max ENDDO pe_log_points(:,0) = log_point_s%sum ! Results from PE0 ! !-- Calculate mean of all PEs, store it on log_point_s%sum !-- and find minimum and maximum DO iii = 1, SIZE( log_point ) DO i = 1, numprocs-1 log_point_s(iii)%sum = log_point_s(iii)%sum + pe_log_points(iii,i) pe_min(iii) = MIN( pe_min(iii), pe_log_points(iii,i) ) pe_max(iii) = MAX( pe_max(iii), pe_log_points(iii,i) ) ENDDO log_point_s(iii)%sum = log_point_s(iii)%sum / numprocs ! !-- Calculate rms DO i = 0, numprocs-1 pe_rms(iii) = pe_rms(iii) + ( & pe_log_points(iii,i) - log_point_s(iii)%sum & )**2 ENDDO pe_rms(iii) = SQRT( pe_rms(iii) / numprocs ) ENDDO ELSE ! !-- Send data to PE0 (pe_max is used as temporary storage to send !-- the data in order to avoid sending the data type log) pe_max = log_point_s%sum CALL MPI_SEND( pe_max(1), SIZE( log_point ), MPI_REAL, 0, 0, comm2d, & ierr ) #endif ENDIF ! !-- Write cpu-times IF ( myid == 0 ) THEN ! !-- Re-store sums WHERE ( log_point_s%counts /= 0 ) sum = log_point_s%sum ELSEWHERE sum = -1.0 ENDWHERE ! !-- Write cpu-times sorted by size WRITE ( 18, 101 ) DO ii = MAXLOC( sum ) i = ii(1) IF ( sum(i) /= -1.0 ) THEN WRITE ( 18, 102 ) & log_point_s(i)%place, log_point_s(i)%sum, & log_point_s(i)%sum / log_point(1)%sum * 100.0, & log_point_s(i)%counts, pe_min(i), pe_max(i), pe_rms(i) sum(i) = -1.0 ELSE EXIT ENDIF ENDDO ! !-- Output of handling of MPI operations IF ( collective_wait ) THEN WRITE ( 18, 103 ) ELSE WRITE ( 18, 104 ) ENDIF IF ( cpu_log_barrierwait ) WRITE ( 18, 111 ) IF ( synchronous_exchange ) THEN WRITE ( 18, 105 ) ELSE WRITE ( 18, 106 ) ENDIF ! !-- Empty lines in order to create a gap to the results of the model !-- continuation runs WRITE ( 18, 107 ) ! !-- Unit 18 is not needed anymore CALL close_file( 18 ) ENDIF 100 FORMAT (A/11('-')//'CPU measures for ',I5,' PEs (',I5,'(x) * ',I5,'(y', & &') tasks *',I5,' threads):'// & 'gridpoints (x/y/z): ',20X,I5,' * ',I5,' * ',I5/ & 'nr of timesteps: ',22X,I6/ & 'cpu time per grid point and timestep: ',5X,F8.5,' * 10**-6 s') 101 FORMAT (/'special measures:'/ & &'-----------------------------------------------------------', & &'--------------------') 102 FORMAT (A20,2X,F9.3,2X,F7.2,1X,I7,3(1X,F9.3)) 103 FORMAT (/'Barriers are set in front of collective operations') 104 FORMAT (/'No barriers are set in front of collective operations') 105 FORMAT (/'Exchange of ghostpoints via MPI_SENDRCV') 106 FORMAT (/'Exchange of ghostpoints via MPI_ISEND/MPI_IRECV') 107 FORMAT (//) 108 FORMAT ('Accelerator boards per node: ',14X,I2) 109 FORMAT ('Accelerator boards: ',23X,I2) 110 FORMAT ('----------------------------------------------------------', & &'------------'//& &'place: mean counts min ', & &' max rms'/ & &' sec. % sec. ', & &' sec. sec.'/ & &'-----------------------------------------------------------', & &'-------------------') 111 FORMAT (/'Barriers are set at beginning (start/continue) of measurements') END SUBROUTINE cpu_statistics END MODULE cpulog