Home

Context Navigation

source: palm/trunk/SOURCE/check_parameters.f90 @ 9

Last change on this file since 9 was 4, checked in by raasch, 18 years ago
Id keyword set as property for all *.f90 files
Property svn:keywords set to `Id`
File size: 83.7 KB

Line
1	SUBROUTINE check_parameters
2
3	!------------------------------------------------------------------------------!
4	! Actual revisions:
5	! -----------------
6	!
7	!
8	! Former revisions:
9	! -----------------
10	! $Id: check_parameters.f90 4 2007-02-13 11:33:16Z raasch $
11	! RCS Log replace by Id keyword, revision history cleaned up
12	!
13	! Revision 1.61 2006/08/04 14:20:25 raasch
14	! do2d_unit and do3d_unit now defined as 2d-arrays, check of
15	! use_upstream_for_tke, default value for dt_dopts,
16	! generation of file header moved from routines palm and header to here
17	!
18	! Revision 1.1 1997/08/26 06:29:23 raasch
19	! Initial revision
20	!
21	!
22	! Description:
23	! ------------
24	! Check control parameters and deduce further quantities.
25	!------------------------------------------------------------------------------!
26
27	USE arrays_3d
28	USE constants
29	USE control_parameters
30	USE grid_variables
31	USE indices
32	USE model_1d
33	USE netcdf_control
34	USE particle_attributes
35	USE pegrid
36	USE profil_parameter
37	USE statistics
38	USE transpose_indices
39
40	IMPLICIT NONE
41
42	CHARACTER (LEN=1) :: sq
43	CHARACTER (LEN=6) :: var
44	CHARACTER (LEN=7) :: unit
45	CHARACTER (LEN=8) :: date
46	CHARACTER (LEN=10) :: time
47	CHARACTER (LEN=100) :: action
48
49	INTEGER :: i, ilen, intervals, iter, j, k, nnxh, nnyh, position, prec
50	LOGICAL :: found, ldum
51	REAL :: gradient, maxn, maxp
52
53
54	!
55	!-- Warning, if host is not set
56	IF ( host(1:1) == ' ' ) THEN
57	IF ( myid == 0 ) THEN
58	PRINT*, '+++ WARNING: check_parameters:'
59	PRINT*, ' "host" is not set. Please check that environment', &
60	' variable "localhost"'
61	PRINT*, ' is set before running PALM'
62	ENDIF
63	ENDIF
64
65	!
66	!-- Generate the file header which is used as a header for most of PALM's
67	!-- output files
68	CALL DATE_AND_TIME( date, time )
69	run_date = date(7:8)//'-'//date(5:6)//'-'//date(3:4)
70	run_time = time(1:2)//':'//time(3:4)//':'//time(5:6)
71
72	WRITE ( run_description_header, '(A,2X,A,A,A,I2.2,2X,A,A,2X,A,1X,A)' ) &
73	TRIM( version ),'run: ', TRIM( run_identifier ), '.', &
74	runnr, 'host: ', TRIM( host ), run_date, run_time
75
76	!
77	!-- Check topography setting (check for illegal parameter combinations)
78	IF ( topography /= 'flat' ) THEN
79	action = ' '
80	IF ( scalar_advec /= 'pw-scheme' ) THEN
81	WRITE( action, '(A,A)' ) 'scalar_advec = ', scalar_advec
82	ENDIF
83	IF ( momentum_advec /= 'pw-scheme' ) THEN
84	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
85	ENDIF
86	IF ( psolver == 'multigrid' .OR. psolver == 'sor' ) THEN
87	WRITE( action, '(A,A)' ) 'psolver = ', psolver
88	ENDIF
89	IF ( sloping_surface ) THEN
90	WRITE( action, '(A)' ) 'sloping surface = .TRUE.'
91	ENDIF
92	IF ( galilei_transformation ) THEN
93	WRITE( action, '(A)' ) 'galilei_transformation = .TRUE.'
94	ENDIF
95	IF ( cloud_physics ) THEN
96	WRITE( action, '(A)' ) 'cloud_physics = .TRUE.'
97	ENDIF
98	IF ( cloud_droplets ) THEN
99	WRITE( action, '(A)' ) 'cloud_droplets = .TRUE.'
100	ENDIF
101	IF ( moisture ) THEN
102	WRITE( action, '(A)' ) 'moisture = .TRUE.'
103	ENDIF
104	IF ( .NOT. prandtl_layer ) THEN
105	WRITE( action, '(A)' ) 'prandtl_layer = .FALSE.'
106	ENDIF
107	IF ( action /= ' ' ) THEN
108	IF ( myid == 0 ) THEN
109	PRINT*, '+++ check_parameters:'
110	PRINT*, ' a non-flat topography does not allow ', TRIM( action )
111	ENDIF
112	CALL local_stop
113	ENDIF
114	ENDIF
115	!
116	!-- Check whether there are any illegal values
117	!-- Pressure solver:
118	IF ( psolver /= 'poisfft' .AND. psolver /= 'poisfft_hybrid' .AND. &
119	psolver /= 'sor' .AND. psolver /= 'multigrid' ) THEN
120	IF ( myid == 0 ) THEN
121	PRINT*, '+++ check_parameters:'
122	PRINT*, ' unknown solver for perturbation pressure: psolver=', &
123	psolver
124	ENDIF
125	CALL local_stop
126	ENDIF
127
128	#if defined( __parallel )
129	IF ( psolver == 'poisfft_hybrid' .AND. pdims(2) /= 1 ) THEN
130	IF ( myid == 0 ) THEN
131	PRINT*, '+++ check_parameters:'
132	PRINT*, ' psolver="', TRIM( psolver ), '" only works for a ', &
133	'1d domain-decomposition along x'
134	PRINT*, ' please do not set npey/=1 in the parameter file'
135	ENDIF
136	CALL local_stop
137	ENDIF
138	IF ( ( psolver == 'poisfft_hybrid' .OR. psolver == 'multigrid' ) .AND. &
139	( nxra > nxr .OR. nyna > nyn .OR. nza > nz ) ) THEN
140	IF ( myid == 0 ) THEN
141	PRINT*, '+++ check_parameters:'
142	PRINT*, ' psolver="', TRIM( psolver ), '" does not work for ', &
143	'subdomains with unequal size'
144	PRINT*, ' please set grid_matching = ''strict'' in the parameter',&
145	' file'
146	ENDIF
147	CALL local_stop
148	ENDIF
149	#else
150	IF ( psolver == 'poisfft_hybrid' ) THEN
151	IF ( myid == 0 ) THEN
152	PRINT*, '+++ check_parameters:'
153	PRINT*, ' psolver="', TRIM( psolver ), '" only works for a ', &
154	'parallel environment'
155	ENDIF
156	CALL local_stop
157	ENDIF
158	#endif
159
160	IF ( psolver == 'multigrid' ) THEN
161	IF ( cycle_mg == 'w' ) THEN
162	gamma_mg = 2
163	ELSEIF ( cycle_mg == 'v' ) THEN
164	gamma_mg = 1
165	ELSE
166	IF ( myid == 0 ) THEN
167	PRINT*, '+++ check_parameters:'
168	PRINT*, ' unknown multigrid cycle: cycle_mg=', cycle_mg
169	ENDIF
170	CALL local_stop
171	ENDIF
172	ENDIF
173
174	IF ( fft_method /= 'singleton-algorithm' .AND. &
175	fft_method /= 'temperton-algorithm' .AND. &
176	fft_method /= 'system-specific' ) THEN
177	IF ( myid == 0 ) THEN
178	PRINT*, '+++ check_parameters:'
179	PRINT*, ' unknown fft-algorithm: fft_method=', fft_method
180	ENDIF
181	CALL local_stop
182	ENDIF
183
184	!
185	!-- Advection schemes:
186	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ups-scheme' ) &
187	THEN
188	IF ( myid == 0 ) PRINT*, '+++ check_parameters: unknown advection ', &
189	'scheme: momentum_advec=', momentum_advec
190	CALL local_stop
191	ENDIF
192	IF ( ( momentum_advec == 'ups-scheme' .OR. scalar_advec == 'ups-scheme' )&
193	.AND. timestep_scheme /= 'euler' ) THEN
194	IF ( myid == 0 ) PRINT*, '+++ check_parameters: momentum_advec=', &
195	momentum_advec, ' is not allowed with ', &
196	'timestep_scheme=', timestep_scheme
197	CALL local_stop
198	ENDIF
199
200	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'bc-scheme' .AND.&
201	scalar_advec /= 'ups-scheme' ) THEN
202	IF ( myid == 0 ) PRINT*, '+++ check_parameters: unknown advection ', &
203	'scheme: scalar_advec=', scalar_advec
204	CALL local_stop
205	ENDIF
206
207	IF ( use_sgs_for_particles .AND. .NOT. use_upstream_for_tke ) THEN
208	use_upstream_for_tke = .TRUE.
209	IF ( myid == 0 ) THEN
210	PRINT*, '+++ WARNING: check_parameters: use_upstream_for_tke set ', &
211	'.TRUE. because use_sgs_for_particles = .TRUE.'
212	ENDIF
213	ENDIF
214
215	IF ( use_upstream_for_tke .AND. timestep_scheme(1:8) == 'leapfrog' ) THEN
216	IF ( myid == 0 ) THEN
217	PRINT*, '+++ check_parameters: use_upstream_for_tke = .TRUE. ', &
218	'not allowed with timestep_scheme=', timestep_scheme
219	ENDIF
220	CALL local_stop
221	ENDIF
222
223	!
224	!-- Timestep schemes:
225	SELECT CASE ( TRIM( timestep_scheme ) )
226
227	CASE ( 'euler' )
228	intermediate_timestep_count_max = 1
229	asselin_filter_factor = 0.0
230
231	CASE ( 'leapfrog', 'leapfrog+euler' )
232	intermediate_timestep_count_max = 1
233
234	CASE ( 'runge-kutta-2' )
235	intermediate_timestep_count_max = 2
236	asselin_filter_factor = 0.0
237
238	CASE ( 'runge-kutta-3' )
239	intermediate_timestep_count_max = 3
240	asselin_filter_factor = 0.0
241
242	CASE DEFAULT
243	IF ( myid == 0 ) PRINT*, '+++ check_parameters: unknown timestep ',&
244	'scheme: timestep_scheme=', timestep_scheme
245	CALL local_stop
246
247	END SELECT
248
249	IF ( scalar_advec /= 'pw-scheme' .AND. timestep_scheme(1:5) == 'runge' ) &
250	THEN
251	IF ( myid == 0 ) THEN
252	PRINT*, '+++ check_parameters: scalar advection scheme "', &
253	TRIM( scalar_advec ), '"'
254	PRINT*, ' does not work with timestep_scheme "', &
255	TRIM( timestep_scheme ), '"'
256	ENDIF
257	CALL local_stop
258	ENDIF
259
260	IF ( momentum_advec /= 'pw-scheme' .AND. timestep_scheme(1:5) == 'runge' ) &
261	THEN
262	IF ( myid == 0 ) THEN
263	PRINT*, '+++ check_parameters: momentum advection scheme "', &
264	TRIM( momentum_advec ), '"'
265	PRINT*, ' does not work with timestep_scheme "', &
266	TRIM( timestep_scheme ), '"'
267	ENDIF
268	CALL local_stop
269	ENDIF
270
271
272	IF ( initializing_actions == ' ' ) THEN
273	IF ( myid == 0 ) THEN
274	PRINT*, '+++ check parameters:'
275	PRINT*, ' no value found for initializing_actions'
276	ENDIF
277	CALL local_stop
278	ENDIF
279
280	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
281	!
282	!-- No model continuation run; several initialising actions are possible
283	action = initializing_actions
284	DO WHILE ( TRIM( action ) /= '' )
285	position = INDEX( action, ' ' )
286	SELECT CASE ( action(1:position-1) )
287
288	CASE ( 'set_constant_profiles', 'set_1d-model_profiles', &
289	'initialize_vortex', 'initialize_ptanom' )
290	action = action(position+1:)
291
292	CASE DEFAULT
293	IF ( myid == 0 ) PRINT*, '+++ check_parameters: initializi', &
294	'ng_action unkown or not allowed: action = "', &
295	TRIM(action), '"'
296	CALL local_stop
297
298	END SELECT
299	ENDDO
300	ENDIF
301	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
302	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
303	IF ( myid == 0 ) PRINT*, '+++ check_parameters: initializing_actions', &
304	'"set_constant_profiles" and "set_1d-model_profiles" are not', &
305	' allowed simultaneously'
306	CALL local_stop
307	ENDIF
308
309	IF ( cloud_physics .AND. .NOT. moisture ) THEN
310	IF ( myid == 0 ) PRINT*, '+++ check_parameters: moisture =', &
311	moisture, ' is not allowed with ', &
312	'cloud_physics=', cloud_physics
313	CALL local_stop
314	ENDIF
315
316	IF ( moisture .AND. sloping_surface ) THEN
317	IF ( myid == 0 ) PRINT*, '+++ check_parameters: moisture = TRUE', &
318	'and hang = TRUE are not', &
319	' allowed simultaneously'
320	CALL local_stop
321	ENDIF
322
323	IF ( moisture .AND. scalar_advec == 'ups-scheme' ) THEN
324	IF ( myid == 0 ) PRINT*, '+++ check_parameters: UPS-scheme', &
325	'is not implemented for moisture'
326	CALL local_stop
327	ENDIF
328
329	IF ( passive_scalar .AND. moisture ) THEN
330	IF ( myid == 0 ) PRINT*, '+++ check_parameters: moisture = TRUE and', &
331	'passive_scalar = TRUE is not allowed ', &
332	'simultaneously'
333	CALL local_stop
334	ENDIF
335
336	IF ( passive_scalar .AND. scalar_advec == 'ups-scheme' ) THEN
337	IF ( myid == 0 ) PRINT*, '+++ check_parameters: UPS-scheme', &
338	'is not implemented for passive_scalar'
339	CALL local_stop
340	ENDIF
341
342	IF ( grid_matching /= 'strict' .AND. grid_matching /= 'match' ) THEN
343	IF ( myid == 0 ) PRINT*, '+++ check_parameters: illegal value "', &
344	TRIM( grid_matching ), &
345	'" found for parameter grid_matching'
346	CALL local_stop
347	ENDIF
348
349	!
350	!-- In case of no model continuation run, check initialising parameters and
351	!-- deduce further quantities
352	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
353
354	!
355	!-- Initial profiles for 1D and 3D model, respectively
356	u_init = ug_surface
357	v_init = vg_surface
358	pt_init = pt_surface
359	IF ( moisture ) q_init = q_surface
360	IF ( passive_scalar ) q_init = s_surface
361
362	!
363	!--
364	!-- If required, compute initial profile of the geostrophic wind
365	!-- (component ug)
366	i = 1
367	gradient = 0.0
368	ug_vertical_gradient_level_ind(1) = 0
369	ug(0) = ug_surface
370	DO k = 1, nzt+1
371	IF ( ug_vertical_gradient_level(i) < zu(k) .AND. &
372	ug_vertical_gradient_level(i) >= 0.0 ) THEN
373	gradient = ug_vertical_gradient(i) / 100.0
374	ug_vertical_gradient_level_ind(i) = k - 1
375	i = i + 1
376	IF ( i > 10 ) THEN
377	IF ( myid == 0 ) THEN
378	PRINT*, '+++ check_parameters: upper bound 10 of array', &
379	' "ug_vertical_gradient_level_ind" exceeded'
380	ENDIF
381	CALL local_stop
382	ENDIF
383	ENDIF
384	IF ( gradient /= 0.0 ) THEN
385	IF ( k /= 1 ) THEN
386	ug(k) = ug(k-1) + dzu(k) * gradient
387	ELSE
388	ug(k) = ug_surface + 0.5 * dzu(k) * gradient
389	ENDIF
390	ELSE
391	ug(k) = ug(k-1)
392	ENDIF
393	ENDDO
394
395	u_init = ug
396
397	!
398	!-- In case of no given gradients for ug, choose a vanishing gradient
399	IF ( ug_vertical_gradient_level(1) == -1.0 ) THEN
400	ug_vertical_gradient_level(1) = 0.0
401	ENDIF
402
403	!
404	!--
405	!-- If required, compute initial profile of the geostrophic wind
406	!-- (component vg)
407	i = 1
408	gradient = 0.0
409	vg_vertical_gradient_level_ind(1) = 0
410	vg(0) = vg_surface
411	DO k = 1, nzt+1
412	IF ( vg_vertical_gradient_level(i) < zu(k) .AND. &
413	vg_vertical_gradient_level(i) >= 0.0 ) THEN
414	gradient = vg_vertical_gradient(i) / 100.0
415	vg_vertical_gradient_level_ind(i) = k - 1
416	i = i + 1
417	IF ( i > 10 ) THEN
418	IF ( myid == 0 ) THEN
419	PRINT*, '+++ check_parameters: upper bound 10 of array', &
420	' "vg_vertical_gradient_level_ind" exceeded'
421	ENDIF
422	CALL local_stop
423	ENDIF
424	ENDIF
425	IF ( gradient /= 0.0 ) THEN
426	IF ( k /= 1 ) THEN
427	vg(k) = vg(k-1) + dzu(k) * gradient
428	ELSE
429	vg(k) = vg_surface + 0.5 * dzu(k) * gradient
430	ENDIF
431	ELSE
432	vg(k) = vg(k-1)
433	ENDIF
434	ENDDO
435
436	v_init = vg
437
438	!
439	!-- In case of no given gradients for vg, choose a vanishing gradient
440	IF ( vg_vertical_gradient_level(1) == -1.0 ) THEN
441	vg_vertical_gradient_level(1) = 0.0
442	ENDIF
443
444	!
445	!-- If required, compute initial temperature profile using the given
446	!-- temperature gradient
447	i = 1
448	gradient = 0.0
449	pt_vertical_gradient_level_ind(1) = 0
450	DO k = 1, nzt+1
451	IF ( pt_vertical_gradient_level(i) < zu(k) .AND. &
452	pt_vertical_gradient_level(i) >= 0.0 ) THEN
453	gradient = pt_vertical_gradient(i) / 100.0
454	pt_vertical_gradient_level_ind(i) = k - 1
455	i = i + 1
456	IF ( i > 10 ) THEN
457	IF ( myid == 0 ) THEN
458	PRINT*, '+++ check_parameters: upper bound 10 of array', &
459	' "pt_vertical_gradient_level_ind" exceeded'
460	ENDIF
461	CALL local_stop
462	ENDIF
463	ENDIF
464	IF ( gradient /= 0.0 ) THEN
465	IF ( k /= 1 ) THEN
466	pt_init(k) = pt_init(k-1) + dzu(k) * gradient
467	ELSE
468	pt_init(k) = pt_init(k-1) + 0.5 * dzu(k) * gradient
469	ENDIF
470	ELSE
471	pt_init(k) = pt_init(k-1)
472	ENDIF
473	ENDDO
474
475	!
476	!-- In case of no given temperature gradients, choose gradient of neutral
477	!-- stratification
478	IF ( pt_vertical_gradient_level(1) == -1.0 ) THEN
479	pt_vertical_gradient_level(1) = 0.0
480	ENDIF
481
482	!
483	!-- Store temperature gradient at the top boundary for possile Neumann
484	!-- boundary condition
485	bc_pt_t_val = ( pt_init(nzt) - pt_init(nzt-1) ) / dzu(nzt)
486
487	!
488	!-- If required, compute initial humidity or scalar profile using the given
489	!-- humidity/scalar gradient. In case of scalar transport, initially store
490	!-- values of the scalar parameters on humidity parameters
491	IF ( passive_scalar ) THEN
492	bc_q_b = bc_s_b
493	bc_q_t = bc_s_t
494	q_surface = s_surface
495	q_surface_initial_change = s_surface_initial_change
496	q_vertical_gradient = s_vertical_gradient
497	q_vertical_gradient_level = s_vertical_gradient_level
498	surface_waterflux = surface_scalarflux
499	ENDIF
500
501	IF ( moisture .OR. passive_scalar ) THEN
502
503	i = 1
504	gradient = 0.0
505	q_vertical_gradient_level_ind(1) = 0
506	DO k = 1, nzt+1
507	IF ( q_vertical_gradient_level(i) < zu(k) .AND. &
508	q_vertical_gradient_level(i) >= 0.0 ) THEN
509	gradient = q_vertical_gradient(i) / 100.0
510	q_vertical_gradient_level_ind(i) = k - 1
511	i = i + 1
512	IF ( i > 10 ) THEN
513	IF ( myid == 0 ) THEN
514	PRINT*, '+++ check_parameters: upper bound 10 of arr', &
515	'ay "q_vertical_gradient_level_ind" exceeded'
516	ENDIF
517	CALL local_stop
518	ENDIF
519	ENDIF
520	IF ( gradient /= 0.0 ) THEN
521	IF ( k /= 1 ) THEN
522	q_init(k) = q_init(k-1) + dzu(k) * gradient
523	ELSE
524	q_init(k) = q_init(k-1) + 0.5 * dzu(k) * gradient
525	ENDIF
526	ELSE
527	q_init(k) = q_init(k-1)
528	ENDIF
529	ENDDO
530
531	!
532	!-- In case of no given humidity gradients, choose zero gradient
533	!-- conditions
534	IF ( q_vertical_gradient_level(1) == -1.0 ) THEN
535	q_vertical_gradient_level(1) = 0.0
536	ENDIF
537
538	!
539	!-- Store humidity gradient at the top boundary for possile Neumann
540	!-- boundary condition
541	bc_q_t_val = ( q_init(nzt) - q_init(nzt-1) ) / dzu(nzt)
542
543	ENDIF
544
545	ENDIF
546
547	!
548	!-- Compute Coriolis parameter
549	f = 2.0 * omega * SIN( phi / 180.0 * pi )
550	fs = 2.0 * omega * COS( phi / 180.0 * pi )
551
552	!
553	!-- In case of a given slope, compute the relevant quantities
554	IF ( alpha_surface /= 0.0 ) THEN
555	IF ( ABS( alpha_surface ) > 90.0 ) THEN
556	IF ( myid == 0 ) PRINT*, '+++ check_parameters: ABS( alpha_surface',&
557	'=', alpha_surface, ' ) must be < 90.0'
558	CALL local_stop
559	ENDIF
560	sloping_surface = .TRUE.
561	cos_alpha_surface = COS( alpha_surface / 180.0 * pi )
562	sin_alpha_surface = SIN( alpha_surface / 180.0 * pi )
563	ENDIF
564
565	!
566	!-- Check time step and cfl_factor
567	IF ( dt /= -1.0 ) THEN
568	IF ( dt <= 0.0 .AND. dt /= -1.0 ) THEN
569	IF ( myid == 0 ) PRINT*, '+++ check_parameters: dt=', dt, ' <= 0.0'
570	CALL local_stop
571	ENDIF
572	dt_3d = dt
573	dt_fixed = .TRUE.
574	ENDIF
575
576	IF ( cfl_factor <= 0.0 .OR. cfl_factor > 1.0 ) THEN
577	IF ( cfl_factor == -1.0 ) THEN
578	IF ( momentum_advec == 'ups-scheme' .OR. &
579	scalar_advec == 'ups-scheme' ) THEN
580	cfl_factor = 0.8
581	ELSE
582	IF ( timestep_scheme == 'runge-kutta-2' ) THEN
583	cfl_factor = 0.8
584	ELSEIF ( timestep_scheme == 'runge-kutta-3' ) THEN
585	cfl_factor = 0.9
586	ELSE
587	cfl_factor = 0.1
588	ENDIF
589	ENDIF
590	ELSE
591	IF ( myid == 0 ) THEN
592	PRINT*, '+++ check_parameters: cfl_factor=', cfl_factor, &
593	' out of range'
594	PRINT*, '+++ 0.0 < cfl_factor <= 1.0 is required'
595	ENDIF
596	CALL local_stop
597	ENDIF
598	ENDIF
599
600	!
601	!-- Store simulated time at begin
602	simulated_time_at_begin = simulated_time
603
604	!
605	!-- Set wind speed in the Galilei-transformed system
606	IF ( galilei_transformation ) THEN
607	IF ( use_ug_for_galilei_tr .AND. &
608	ug_vertical_gradient_level(1) == 0.0 .AND. &
609	vg_vertical_gradient_level(1) == 0.0 ) THEN
610	u_gtrans = ug_surface
611	v_gtrans = vg_surface
612	ELSEIF ( use_ug_for_galilei_tr .AND. &
613	ug_vertical_gradient_level(1) /= 0.0 ) THEN
614	IF ( myid == 0 ) THEN
615	PRINT*, '+++ check_parameters:'
616	PRINT*, ' baroclinicity (ug) not allowed'
617	PRINT*, ' simultaneously with galilei transformation'
618	ENDIF
619	CALL local_stop
620	ELSEIF ( use_ug_for_galilei_tr .AND. &
621	vg_vertical_gradient_level(1) /= 0.0 ) THEN
622	IF ( myid == 0 ) THEN
623	PRINT*, '+++ check_parameters:'
624	PRINT*, ' baroclinicity (vg) not allowed'
625	PRINT*, ' simultaneously with galilei transformation'
626	ENDIF
627	CALL local_stop
628	ELSE
629	IF ( myid == 0 ) THEN
630	PRINT*, '+++ WARNING: check_parameters:'
631	PRINT*, ' variable translation speed used for galilei-tran' // &
632	'sformation, which'
633	PRINT*, ' may cause instabilities in stably stratified regions'
634	ENDIF
635	ENDIF
636	ENDIF
637
638	!
639	!-- In case of using a prandtl-layer, calculated (or prescribed) surface
640	!-- fluxes have to be used in the diffusion-terms
641	IF ( prandtl_layer ) use_surface_fluxes = .TRUE.
642
643	!
644	!-- Check boundary conditions and set internal variables:
645	!-- Lateral boundary conditions
646	IF ( bc_lr /= 'cyclic' .AND. bc_lr /= 'dirichlet/neumann' .AND. &
647	bc_lr /= 'neumann/dirichlet' ) THEN
648	IF ( myid == 0 ) THEN
649	PRINT*, '+++ check_parameters:'
650	PRINT*, ' unknown boundary condition: bc_lr = ', bc_lr
651	ENDIF
652	CALL local_stop
653	ENDIF
654	IF ( bc_ns /= 'cyclic' .AND. bc_ns /= 'dirichlet/neumann' .AND. &
655	bc_ns /= 'neumann/dirichlet' ) THEN
656	IF ( myid == 0 ) THEN
657	PRINT*, '+++ check_parameters:'
658	PRINT*, ' unknown boundary condition: bc_ns = ', bc_ns
659	ENDIF
660	CALL local_stop
661	ENDIF
662
663	!
664	!-- Non-cyclic lateral boundaries require the multigrid method and Piascek-
665	!-- Willimas advection scheme. Several schemes and tools do not work with
666	!-- non-cyclic boundary conditions.
667	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
668	IF ( psolver /= 'multigrid' ) THEN
669	IF ( myid == 0 ) THEN
670	PRINT*, '+++ check_parameters:'
671	PRINT*, ' non-cyclic lateral boundaries do not allow', &
672	' psolver = ', psolver
673	ENDIF
674	CALL local_stop
675	ENDIF
676	IF ( momentum_advec /= 'pw-scheme' ) THEN
677	IF ( myid == 0 ) THEN
678	PRINT*, '+++ check_parameters:'
679	PRINT*, ' non-cyclic lateral boundaries do not allow', &
680	' momentum_advec = ', momentum_advec
681	ENDIF
682	CALL local_stop
683	ENDIF
684	IF ( scalar_advec /= 'pw-scheme' ) THEN
685	IF ( myid == 0 ) THEN
686	PRINT*, '+++ check_parameters:'
687	PRINT*, ' non-cyclic lateral boundaries do not allow', &
688	' scalar_advec = ', scalar_advec
689	ENDIF
690	CALL local_stop
691	ENDIF
692	IF ( galilei_transformation ) THEN
693	IF ( myid == 0 ) THEN
694	PRINT*, '+++ check_parameters:'
695	PRINT*, ' non-cyclic lateral boundaries do not allow', &
696	' galilei_transformation = .T.'
697	ENDIF
698	CALL local_stop
699	ENDIF
700	IF ( conserve_volume_flow ) THEN
701	IF ( myid == 0 ) THEN
702	PRINT*, '+++ check_parameters:'
703	PRINT*, ' non-cyclic lateral boundaries do not allow', &
704	' conserve_volume_flow = .T.'
705	ENDIF
706	CALL local_stop
707	ENDIF
708	ENDIF
709
710	!
711	!-- Bottom boundary condition for the turbulent Kinetic energy
712	IF ( bc_e_b == 'neumann' ) THEN
713	ibc_e_b = 1
714	IF ( adjust_mixing_length .AND. prandtl_layer ) THEN
715	IF ( myid == 0 ) THEN
716	PRINT*, '+++ WARNING: check_parameters:'
717	PRINT*, ' adjust_mixing_length = TRUE and bc_e_b = ', bc_e_b
718	ENDIF
719	ENDIF
720	ELSEIF ( bc_e_b == '(u)*2+neumann' ) THEN
721	ibc_e_b = 2
722	IF ( .NOT. adjust_mixing_length .AND. prandtl_layer ) THEN
723	IF ( myid == 0 ) THEN
724	PRINT*, '+++ WARNING: check_parameters:'
725	PRINT*, ' adjust_mixing_length = FALSE and bc_e_b = ', bc_e_b
726	ENDIF
727	ENDIF
728	IF ( .NOT. prandtl_layer ) THEN
729	bc_e_b = 'neumann'
730	ibc_e_b = 1
731	IF ( myid == 0 ) THEN
732	PRINT*, '+++ WARNING: check_parameters:'
733	PRINT*, ' boundary condition bc_e_b changed to "', bc_e_b, '"'
734	ENDIF
735	ENDIF
736	ELSE
737	IF ( myid == 0 ) THEN
738	PRINT*, '+++ check_parameters:'
739	PRINT*, ' unknown boundary condition: bc_e_b = ', bc_e_b
740	ENDIF
741	CALL local_stop
742	ENDIF
743
744	!
745	!-- Boundary conditions for perturbation pressure
746	IF ( bc_p_b == 'dirichlet' ) THEN
747	ibc_p_b = 0
748	ELSEIF ( bc_p_b == 'neumann' ) THEN
749	ibc_p_b = 1
750	ELSEIF ( bc_p_b == 'neumann+inhomo' ) THEN
751	ibc_p_b = 2
752	ELSE
753	IF ( myid == 0 ) THEN
754	PRINT*, '+++ check_parameters:'
755	PRINT*, ' unknown boundary condition: bc_p_b = ', bc_p_b
756	ENDIF
757	CALL local_stop
758	ENDIF
759	IF ( ibc_p_b == 2 .AND. .NOT. prandtl_layer ) THEN
760	IF ( myid == 0 ) THEN
761	PRINT*, '+++ check_parameters:'
762	PRINT*, ' boundary condition: bc_p_b = ', TRIM( bc_p_b ), &
763	' not allowed with'
764	PRINT*, ' prandtl_layer = .FALSE.'
765	ENDIF
766	CALL local_stop
767	ENDIF
768	IF ( bc_p_t == 'dirichlet' ) THEN
769	ibc_p_t = 0
770	ELSEIF ( bc_p_t == 'neumann' ) THEN
771	ibc_p_t = 1
772	ELSE
773	IF ( myid == 0 ) THEN
774	PRINT*, '+++ check_parameters:'
775	PRINT*, ' unknown boundary condition: bc_p_t = ', bc_p_t
776	ENDIF
777	CALL local_stop
778	ENDIF
779
780	!
781	!-- Boundary conditions for potential temperature
782	IF ( bc_pt_b == 'dirichlet' ) THEN
783	ibc_pt_b = 0
784	ELSEIF ( bc_pt_b == 'neumann' ) THEN
785	ibc_pt_b = 1
786	ELSE
787	IF ( myid == 0 ) THEN
788	PRINT*, '+++ check_parameters:'
789	PRINT*, ' unknown boundary condition: bc_pt_b = ', bc_pt_b
790	ENDIF
791	CALL local_stop
792	ENDIF
793	IF ( bc_pt_t == 'dirichlet' ) THEN
794	ibc_pt_t = 0
795	ELSEIF ( bc_pt_t == 'neumann' ) THEN
796	ibc_pt_t = 1
797	ELSE
798	IF ( myid == 0 ) THEN
799	PRINT*, '+++ check_parameters:'
800	PRINT*, ' unknown boundary condition: bc_pt_t = ', bc_pt_t
801	ENDIF
802	CALL local_stop
803	ENDIF
804
805	IF ( surface_heatflux == 9999999.9 ) constant_heatflux = .FALSE.
806
807	!
808	!-- A given surface temperature implies Dirichlet boundary condition for
809	!-- temperature. In this case specification of a constant heat flux is
810	!-- forbidden.
811	IF ( ibc_pt_b == 0 .AND. constant_heatflux .AND. &
812	surface_heatflux /= 0.0 ) THEN
813	IF ( myid == 0 ) THEN
814	PRINT*, '+++ check_parameters:'
815	PRINT*, ' boundary_condition: bc_pt_b = ', bc_pt_b
816	PRINT*, ' is not allowed with constant_heatflux = .TRUE.'
817	ENDIF
818	CALL local_stop
819	ENDIF
820	IF ( constant_heatflux .AND. pt_surface_initial_change /= 0.0 ) THEN
821	IF ( myid == 0 ) THEN
822	PRINT*, '+++ check_parameters: constant_heatflux = .TRUE. is not'
823	PRINT*, ' allowed with pt_surface_initial_change (/=0) = ', &
824	pt_surface_initial_change
825	ENDIF
826	CALL local_stop
827	ENDIF
828
829	!
830	!-- In case of moisture or passive scalar, set boundary conditions for total
831	!-- water content / scalar
832	IF ( moisture .OR. passive_scalar ) THEN
833	IF ( moisture ) THEN
834	sq = 'q'
835	ELSE
836	sq = 's'
837	ENDIF
838	IF ( bc_q_b == 'dirichlet' ) THEN
839	ibc_q_b = 0
840	ELSEIF ( bc_q_b == 'neumann' ) THEN
841	ibc_q_b = 1
842	ELSE
843	IF ( myid == 0 ) THEN
844	PRINT*, '+++ check_parameters:'
845	PRINT*, ' unknown boundary condition: bc_', sq, '_b = ', bc_q_b
846	ENDIF
847	CALL local_stop
848	ENDIF
849	IF ( bc_q_t == 'dirichlet' ) THEN
850	ibc_q_t = 0
851	ELSEIF ( bc_q_t == 'neumann' ) THEN
852	ibc_q_t = 1
853	ELSE
854	IF ( myid == 0 ) THEN
855	PRINT*, '+++ check_parameters:'
856	PRINT*, ' unknown boundary condition: bc_', sq, '_t = ', bc_q_t
857	ENDIF
858	CALL local_stop
859	ENDIF
860
861	IF ( surface_waterflux == 0.0 ) constant_waterflux = .FALSE.
862
863	!
864	!-- A given surface humidity implies Dirichlet boundary condition for
865	!-- moisture. In this case specification of a constant water flux is
866	!-- forbidden.
867	IF ( ibc_q_b == 0 .AND. constant_waterflux ) THEN
868	IF ( myid == 0 ) THEN
869	PRINT*, '+++ check_parameters:'
870	PRINT*, ' boundary_condition: bc_', sq, '_b = ', bc_q_b
871	PRINT*, ' is not allowed with prescribed surface flux'
872	ENDIF
873	CALL local_stop
874	ENDIF
875	IF ( constant_waterflux .AND. q_surface_initial_change /= 0.0 ) THEN
876	IF ( myid == 0 ) THEN
877	PRINT*, '+++ check_parameters: a prescribed surface flux is not'
878	PRINT*, ' allowed with ', sq, '_surface_initial_change (/=0)', &
879	' = ', q_surface_initial_change
880	ENDIF
881	CALL local_stop
882	ENDIF
883
884	ENDIF
885
886	!
887	!-- Boundary conditions for horizontal components of wind speed
888	IF ( bc_uv_b == 'dirichlet' ) THEN
889	ibc_uv_b = 0
890	ELSEIF ( bc_uv_b == 'neumann' ) THEN
891	ibc_uv_b = 1
892	IF ( prandtl_layer ) THEN
893	IF ( myid == 0 ) THEN
894	PRINT*, '+++ check_parameters:'
895	PRINT*, ' boundary condition: bc_uv_b = ', TRIM( bc_uv_b ), &
896	' is not allowed with'
897	PRINT*, ' prandtl_layer = .TRUE.'
898	ENDIF
899	CALL local_stop
900	ENDIF
901	ELSE
902	IF ( myid == 0 ) THEN
903	PRINT*, '+++ check_parameters:'
904	PRINT*, ' unknown boundary condition: bc_uv_b = ', bc_uv_b
905	ENDIF
906	CALL local_stop
907	ENDIF
908	IF ( bc_uv_t == 'dirichlet' ) THEN
909	ibc_uv_t = 0
910	ELSEIF ( bc_uv_t == 'neumann' ) THEN
911	ibc_uv_t = 1
912	ELSE
913	IF ( myid == 0 ) THEN
914	PRINT*, '+++ check_parameters:'
915	PRINT*, ' unknown boundary condition: bc_uv_t = ', bc_uv_t
916	ENDIF
917	CALL local_stop
918	ENDIF
919
920	!
921	!-- Compute and check, respectively, the Rayleigh Damping parameter
922	IF ( rayleigh_damping_factor == -1.0 ) THEN
923	IF ( momentum_advec == 'ups-scheme' ) THEN
924	rayleigh_damping_factor = 0.01
925	ELSE
926	rayleigh_damping_factor = 0.0
927	ENDIF
928	ELSE
929	IF ( rayleigh_damping_factor < 0.0 .OR. rayleigh_damping_factor > 1.0 ) &
930	THEN
931	IF ( myid == 0 ) THEN
932	PRINT*, '+++ check_parameters:'
933	PRINT*, ' rayleigh_damping_factor = ', rayleigh_damping_factor,&
934	' out of range [0.0,1.0]'
935	ENDIF
936	CALL local_stop
937	ENDIF
938	ENDIF
939
940	IF ( rayleigh_damping_height == -1.0 ) THEN
941	rayleigh_damping_height = 0.66666666666 * zu(nzt)
942	ELSE
943	IF ( rayleigh_damping_height < 0.0 .OR. &
944	rayleigh_damping_height > zu(nzt) ) THEN
945	IF ( myid == 0 ) THEN
946	PRINT*, '+++ check_parameters:'
947	PRINT*, ' rayleigh_damping_height = ', rayleigh_damping_height,&
948	' out of range [0.0,', zu(nzt), ']'
949	ENDIF
950	CALL local_stop
951	ENDIF
952	ENDIF
953
954	!
955	!-- Check limiters for Upstream-Spline scheme
956	IF ( overshoot_limit_u < 0.0 .OR. overshoot_limit_v < 0.0 .OR. &
957	overshoot_limit_w < 0.0 .OR. overshoot_limit_pt < 0.0 .OR. &
958	overshoot_limit_e < 0.0 ) THEN
959	IF ( myid == 0 ) THEN
960	PRINT*, '+++ check_parameters:'
961	PRINT*, ' overshoot_limit_... < 0.0 is not allowed'
962	ENDIF
963	CALL local_stop
964	ENDIF
965	IF ( ups_limit_u < 0.0 .OR. ups_limit_v < 0.0 .OR. ups_limit_w < 0.0 .OR. &
966	ups_limit_pt < 0.0 .OR. ups_limit_e < 0.0 ) THEN
967	IF ( myid == 0 ) THEN
968	PRINT*, '+++ check_parameters:'
969	PRINT*, ' ups_limit_... < 0.0 is not allowed'
970	ENDIF
971	CALL local_stop
972	ENDIF
973
974	!
975	!-- Check number of chosen statistic regions. More than 10 regions are not
976	!-- allowed, because so far no more than 10 corresponding output files can
977	!-- be opened (cf. check_open)
978	IF ( statistic_regions > 9 .OR. statistic_regions < 0 ) THEN
979	IF ( myid == 0 ) THEN
980	PRINT*, '+++ check_parameters: Number of statistic_regions = ', &
981	statistic_regions+1
982	PRINT*, ' Only 10 regions are allowed'
983	ENDIF
984	CALL local_stop
985	ENDIF
986	IF ( normalizing_region > statistic_regions .OR. &
987	normalizing_region < 0) THEN
988	IF ( myid == 0 ) THEN
989	PRINT*, '+++ check_parameters: normalizing_region = ', &
990	normalizing_region, ' is unknown'
991	PRINT*, ' Must be <= ', statistic_regions
992	ENDIF
993	CALL local_stop
994	ENDIF
995
996	!
997	!-- Set the default intervals for data output, if necessary
998	!-- NOTE: dt_dosp has already been set in package_parin
999	IF ( dt_data_output /= 9999999.9 ) THEN
1000	IF ( dt_dopr == 9999999.9 ) dt_dopr = dt_data_output
1001	IF ( dt_dopts == 9999999.9 ) dt_dopts = dt_data_output
1002	IF ( dt_do2d_xy == 9999999.9 ) dt_do2d_xy = dt_data_output
1003	IF ( dt_do2d_xz == 9999999.9 ) dt_do2d_xz = dt_data_output
1004	IF ( dt_do2d_yz == 9999999.9 ) dt_do2d_yz = dt_data_output
1005	IF ( dt_do3d == 9999999.9 ) dt_do3d = dt_data_output
1006	IF ( dt_data_output_av == 9999999.9 ) dt_data_output_av = dt_data_output
1007	ENDIF
1008
1009	!
1010	!-- Set the default skip time intervals for data output, if necessary
1011	IF ( skip_time_dopr == 9999999.9 ) &
1012	skip_time_dopr = skip_time_data_output
1013	IF ( skip_time_dosp == 9999999.9 ) &
1014	skip_time_dosp = skip_time_data_output
1015	IF ( skip_time_do2d_xy == 9999999.9 ) &
1016	skip_time_do2d_xy = skip_time_data_output
1017	IF ( skip_time_do2d_xz == 9999999.9 ) &
1018	skip_time_do2d_xz = skip_time_data_output
1019	IF ( skip_time_do2d_yz == 9999999.9 ) &
1020	skip_time_do2d_yz = skip_time_data_output
1021	IF ( skip_time_do3d == 9999999.9 ) &
1022	skip_time_do3d = skip_time_data_output
1023	IF ( skip_time_data_output_av == 9999999.9 ) &
1024	skip_time_data_output_av = skip_time_data_output
1025
1026	!
1027	!-- Check the average intervals (first for 3d-data, then for profiles and
1028	!-- spectra)
1029	IF ( averaging_interval > dt_data_output_av ) THEN
1030	IF ( myid == 0 ) THEN
1031	PRINT*, '+++ check_parameters: average_interval=', &
1032	averaging_interval, ' must be <= dt_data_output=', &
1033	dt_data_output
1034	ENDIF
1035	CALL local_stop
1036	ENDIF
1037
1038	IF ( averaging_interval_pr == 9999999.9 ) THEN
1039	averaging_interval_pr = averaging_interval
1040	ENDIF
1041
1042	IF ( averaging_interval_pr > dt_dopr ) THEN
1043	IF ( myid == 0 ) THEN
1044	PRINT*, '+++ check_parameters: averaging_interval_pr=', &
1045	averaging_interval_pr, ' must be <= dt_dopr=', dt_dopr
1046	ENDIF
1047	CALL local_stop
1048	ENDIF
1049
1050	IF ( averaging_interval_sp == 9999999.9 ) THEN
1051	averaging_interval_sp = averaging_interval
1052	ENDIF
1053
1054	IF ( averaging_interval_sp > dt_dosp ) THEN
1055	IF ( myid == 0 ) THEN
1056	PRINT*, '+++ check_parameters: averaging_interval_sp=', &
1057	averaging_interval_sp, ' must be <= dt_dosp=', dt_dosp
1058	ENDIF
1059	CALL local_stop
1060	ENDIF
1061
1062	!
1063	!-- Set the default interval for profiles entering the temporal average
1064	IF ( dt_averaging_input_pr == 9999999.9 ) THEN
1065	dt_averaging_input_pr = dt_averaging_input
1066	ENDIF
1067
1068	!
1069	!-- Set the default interval for the output of timeseries to a reasonable
1070	!-- value (tries to minimize the number of calls of flow_statistics)
1071	IF ( dt_dots == 9999999.9 ) THEN
1072	IF ( averaging_interval_pr == 0.0 ) THEN
1073	dt_dots = MIN( dt_run_control, dt_dopr )
1074	ELSE
1075	dt_dots = MIN( dt_run_control, dt_averaging_input_pr )
1076	ENDIF
1077	ENDIF
1078
1079	!
1080	!-- Check the sample rate for averaging (first for 3d-data, then for profiles)
1081	IF ( dt_averaging_input > averaging_interval ) THEN
1082	IF ( myid == 0 ) THEN
1083	PRINT*, '+++ check_parameters: dt_averaging_input=', &
1084	dt_averaging_input, ' must be <= averaging_interval=', &
1085	averaging_interval
1086	ENDIF
1087	CALL local_stop
1088	ENDIF
1089
1090	IF ( dt_averaging_input_pr > averaging_interval_pr ) THEN
1091	IF ( myid == 0 ) THEN
1092	PRINT*, '+++ check_parameters: dt_averaging_input_pr=', &
1093	dt_averaging_input_pr, &
1094	' must be <= averaging_interval_pr=', &
1095	averaging_interval_pr
1096	ENDIF
1097	CALL local_stop
1098	ENDIF
1099
1100	!
1101	!-- Determine the number of output profiles and check whether they are
1102	!-- permissible
1103	DO WHILE ( data_output_pr(dopr_n+1) /= ' ' )
1104
1105	dopr_n = dopr_n + 1
1106	i = dopr_n
1107
1108	!
1109	!-- Determine internal profile number (for hom, homs)
1110	!-- and store height levels
1111	SELECT CASE ( TRIM( data_output_pr(i) ) )
1112
1113	CASE ( 'u', '#u' )
1114	dopr_index(i) = 1
1115	hom(:,2,1,:) = SPREAD( zu, 2, statistic_regions+1 )
1116	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1117	dopr_initial_index(i) = 5
1118	hom(:,2,5,:) = SPREAD( zu, 2, statistic_regions+1 )
1119	data_output_pr(i) = data_output_pr(i)(2:)
1120	ENDIF
1121
1122	CASE ( 'v', '#v' )
1123	dopr_index(i) = 2
1124	hom(:,2,2,:) = SPREAD( zu, 2, statistic_regions+1 )
1125	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1126	dopr_initial_index(i) = 6
1127	hom(:,2,6,:) = SPREAD( zu, 2, statistic_regions+1 )
1128	data_output_pr(i) = data_output_pr(i)(2:)
1129	ENDIF
1130
1131	CASE ( 'w' )
1132	dopr_index(i) = 3
1133	hom(:,2,3,:) = SPREAD( zw, 2, statistic_regions+1 )
1134
1135	CASE ( 'pt', '#pt' )
1136	IF ( .NOT. cloud_physics ) THEN
1137	dopr_index(i) = 4
1138	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
1139	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1140	dopr_initial_index(i) = 7
1141	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
1142	hom(nzb,2,7,:) = 0.0 ! weil zu(nzb) negativ ist
1143	data_output_pr(i) = data_output_pr(i)(2:)
1144	ENDIF
1145	ELSE
1146	dopr_index(i) = 43
1147	hom(:,2,43,:) = SPREAD( zu, 2, statistic_regions+1 )
1148	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1149	dopr_initial_index(i) = 28
1150	hom(:,2,28,:) = SPREAD( zu, 2, statistic_regions+1 )
1151	hom(nzb,2,28,:) = 0.0 ! weil zu(nzb) negativ ist
1152	data_output_pr(i) = data_output_pr(i)(2:)
1153	ENDIF
1154	ENDIF
1155
1156	CASE ( 'e' )
1157	dopr_index(i) = 8
1158	hom(:,2,8,:) = SPREAD( zu, 2, statistic_regions+1 )
1159	hom(nzb,2,8,:) = 0.0
1160
1161	CASE ( 'km', '#km' )
1162	dopr_index(i) = 9
1163	hom(:,2,9,:) = SPREAD( zu, 2, statistic_regions+1 )
1164	hom(nzb,2,9,:) = 0.0
1165	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1166	dopr_initial_index(i) = 23
1167	hom(:,2,23,:) = hom(:,2,9,:)
1168	data_output_pr(i) = data_output_pr(i)(2:)
1169	ENDIF
1170
1171	CASE ( 'kh', '#kh' )
1172	dopr_index(i) = 10
1173	hom(:,2,10,:) = SPREAD( zu, 2, statistic_regions+1 )
1174	hom(nzb,2,10,:) = 0.0
1175	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1176	dopr_initial_index(i) = 24
1177	hom(:,2,24,:) = hom(:,2,10,:)
1178	data_output_pr(i) = data_output_pr(i)(2:)
1179	ENDIF
1180
1181	CASE ( 'l', '#l' )
1182	dopr_index(i) = 11
1183	hom(:,2,11,:) = SPREAD( zu, 2, statistic_regions+1 )
1184	hom(nzb,2,11,:) = 0.0
1185	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1186	dopr_initial_index(i) = 25
1187	hom(:,2,25,:) = hom(:,2,11,:)
1188	data_output_pr(i) = data_output_pr(i)(2:)
1189	ENDIF
1190
1191	CASE ( 'w"u"' )
1192	dopr_index(i) = 12
1193	hom(:,2,12,:) = SPREAD( zw, 2, statistic_regions+1 )
1194	IF ( prandtl_layer ) hom(nzb,2,12,:) = zu(1)
1195
1196	CASE ( 'wu' )
1197	dopr_index(i) = 13
1198	hom(:,2,13,:) = SPREAD( zw, 2, statistic_regions+1 )
1199
1200	CASE ( 'w"v"' )
1201	dopr_index(i) = 14
1202	hom(:,2,14,:) = SPREAD( zw, 2, statistic_regions+1 )
1203	IF ( prandtl_layer ) hom(nzb,2,14,:) = zu(1)
1204
1205	CASE ( 'wv' )
1206	dopr_index(i) = 15
1207	hom(:,2,15,:) = SPREAD( zw, 2, statistic_regions+1 )
1208
1209	CASE ( 'w"pt"' )
1210	dopr_index(i) = 16
1211	hom(:,2,16,:) = SPREAD( zw, 2, statistic_regions+1 )
1212
1213	CASE ( 'wpt' )
1214	dopr_index(i) = 17
1215	hom(:,2,17,:) = SPREAD( zw, 2, statistic_regions+1 )
1216
1217	CASE ( 'wpt' )
1218	dopr_index(i) = 18
1219	hom(:,2,18,:) = SPREAD( zw, 2, statistic_regions+1 )
1220
1221	CASE ( 'wu' )
1222	dopr_index(i) = 19
1223	hom(:,2,19,:) = SPREAD( zw, 2, statistic_regions+1 )
1224	IF ( prandtl_layer ) hom(nzb,2,19,:) = zu(1)
1225
1226	CASE ( 'wv' )
1227	dopr_index(i) = 20
1228	hom(:,2,20,:) = SPREAD( zw, 2, statistic_regions+1 )
1229	IF ( prandtl_layer ) hom(nzb,2,20,:) = zu(1)
1230
1231	CASE ( 'wptBC' )
1232	dopr_index(i) = 21
1233	hom(:,2,21,:) = SPREAD( zw, 2, statistic_regions+1 )
1234
1235	CASE ( 'wptBC' )
1236	dopr_index(i) = 22
1237	hom(:,2,22,:) = SPREAD( zw, 2, statistic_regions+1 )
1238
1239	CASE ( 'u*2' )
1240	dopr_index(i) = 30
1241	hom(:,2,30,:) = SPREAD( zu, 2, statistic_regions+1 )
1242
1243	CASE ( 'v*2' )
1244	dopr_index(i) = 31
1245	hom(:,2,31,:) = SPREAD( zu, 2, statistic_regions+1 )
1246
1247	CASE ( 'w*2' )
1248	dopr_index(i) = 32
1249	hom(:,2,32,:) = SPREAD( zw, 2, statistic_regions+1 )
1250
1251	CASE ( 'pt*2' )
1252	dopr_index(i) = 33
1253	hom(:,2,33,:) = SPREAD( zu, 2, statistic_regions+1 )
1254
1255	CASE ( 'e*' )
1256	dopr_index(i) = 34
1257	hom(:,2,34,:) = SPREAD( zu, 2, statistic_regions+1 )
1258
1259	CASE ( 'w2pt' )
1260	dopr_index(i) = 35
1261	hom(:,2,35,:) = SPREAD( zw, 2, statistic_regions+1 )
1262
1263	CASE ( 'wpt2' )
1264	dopr_index(i) = 36
1265	hom(:,2,36,:) = SPREAD( zw, 2, statistic_regions+1 )
1266
1267	CASE ( 'we' )
1268	dopr_index(i) = 37
1269	hom(:,2,37,:) = SPREAD( zw, 2, statistic_regions+1 )
1270
1271	CASE ( 'w*3' )
1272	dopr_index(i) = 38
1273	hom(:,2,38,:) = SPREAD( zw, 2, statistic_regions+1 )
1274
1275	CASE ( 'Sw' )
1276	dopr_index(i) = 39
1277	hom(:,2,39,:) = SPREAD( zw, 2, statistic_regions+1 )
1278
1279	CASE ( 'q', '#q' )
1280	IF ( .NOT. cloud_physics ) THEN
1281	IF ( myid == 0 ) THEN
1282	PRINT*, '+++ check_parameters: data_output_pr = ', &
1283	data_output_pr(i), &
1284	' is not implemented for cloud_physics = FALSE'
1285	ENDIF
1286	CALL local_stop
1287	ELSE
1288	dopr_index(i) = 41
1289	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
1290	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1291	dopr_initial_index(i) = 26
1292	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1293	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1294	data_output_pr(i) = data_output_pr(i)(2:)
1295	ENDIF
1296	ENDIF
1297
1298	CASE ( 's', '#s' )
1299	IF ( .NOT. passive_scalar ) THEN
1300	IF ( myid == 0 ) THEN
1301	PRINT*, '+++ check_parameters: data_output_pr = ', &
1302	data_output_pr(i), &
1303	' is not implemented for passive_scalar = FALSE'
1304	ENDIF
1305	CALL local_stop
1306	ELSE
1307	dopr_index(i) = 41
1308	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
1309	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1310	dopr_initial_index(i) = 26
1311	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1312	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1313	data_output_pr(i) = data_output_pr(i)(2:)
1314	ENDIF
1315	ENDIF
1316
1317	CASE ( 'qv', '#qv' )
1318	IF ( .NOT. cloud_physics ) THEN
1319	dopr_index(i) = 41
1320	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
1321	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1322	dopr_initial_index(i) = 26
1323	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1324	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1325	data_output_pr(i) = data_output_pr(i)(2:)
1326	ENDIF
1327	ELSE
1328	dopr_index(i) = 42
1329	hom(:,2,42,:) = SPREAD( zu, 2, statistic_regions+1 )
1330	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1331	dopr_initial_index(i) = 27
1332	hom(:,2,27,:) = SPREAD( zu, 2, statistic_regions+1 )
1333	hom(nzb,2,27,:) = 0.0 ! weil zu(nzb) negativ ist
1334	data_output_pr(i) = data_output_pr(i)(2:)
1335	ENDIF
1336	ENDIF
1337
1338	CASE ( 'lpt', '#lpt' )
1339	IF ( .NOT. cloud_physics ) THEN
1340	IF ( myid == 0 ) THEN
1341	PRINT*, '+++ check_parameters: data_output_pr = ', &
1342	data_output_pr(i), &
1343	' is not implemented for cloud_physics = FALSE'
1344	ENDIF
1345	CALL local_stop
1346	ELSE
1347	dopr_index(i) = 4
1348	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
1349	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1350	dopr_initial_index(i) = 7
1351	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
1352	hom(nzb,2,7,:) = 0.0 ! weil zu(nzb) negativ ist
1353	data_output_pr(i) = data_output_pr(i)(2:)
1354	ENDIF
1355	ENDIF
1356
1357	CASE ( 'vpt', '#vpt' )
1358	dopr_index(i) = 44
1359	hom(:,2,44,:) = SPREAD( zu, 2, statistic_regions+1 )
1360	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1361	dopr_initial_index(i) = 29
1362	hom(:,2,29,:) = SPREAD( zu, 2, statistic_regions+1 )
1363	hom(nzb,2,29,:) = 0.0 ! weil zu(nzb) negativ ist
1364	data_output_pr(i) = data_output_pr(i)(2:)
1365	ENDIF
1366
1367	CASE ( 'w"vpt"' )
1368	dopr_index(i) = 45
1369	hom(:,2,45,:) = SPREAD( zw, 2, statistic_regions+1 )
1370
1371	CASE ( 'wvpt' )
1372	dopr_index(i) = 46
1373	hom(:,2,46,:) = SPREAD( zw, 2, statistic_regions+1 )
1374
1375	CASE ( 'wvpt' )
1376	dopr_index(i) = 47
1377	hom(:,2,47,:) = SPREAD( zw, 2, statistic_regions+1 )
1378
1379	CASE ( 'w"q"' )
1380	IF ( .NOT. cloud_physics ) THEN
1381	IF ( myid == 0 ) THEN
1382	PRINT*, '+++ check_parameters: data_output_pr = ', &
1383	data_output_pr(i), &
1384	' is not implemented for cloud_physics = FALSE'
1385	ENDIF
1386	CALL local_stop
1387	ELSE
1388	dopr_index(i) = 48
1389	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
1390	ENDIF
1391
1392	CASE ( 'wq' )
1393	IF ( .NOT. cloud_physics ) THEN
1394	IF ( myid == 0 ) THEN
1395	PRINT*, '+++ check_parameters: data_output_pr = ', &
1396	data_output_pr(i), &
1397	' is not implemented for cloud_physics = FALSE'
1398	ENDIF
1399	CALL local_stop
1400	ELSE
1401	dopr_index(i) = 49
1402	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
1403	ENDIF
1404
1405	CASE ( 'wq' )
1406	IF ( .NOT. cloud_physics ) THEN
1407	IF ( myid == 0 ) THEN
1408	PRINT*, '+++ check_parameters: data_output_pr = ', &
1409	data_output_pr(i), &
1410	' is not implemented for cloud_physics = FALSE'
1411	ENDIF
1412	CALL local_stop
1413	ELSE
1414	dopr_index(i) = 50
1415	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
1416	ENDIF
1417
1418	CASE ( 'w"s"' )
1419	IF ( .NOT. passive_scalar ) THEN
1420	IF ( myid == 0 ) THEN
1421	PRINT*, '+++ check_parameters: data_output_pr = ', &
1422	data_output_pr(i), &
1423	' is not implemented for passive_scalar = FALSE'
1424	ENDIF
1425	CALL local_stop
1426	ELSE
1427	dopr_index(i) = 48
1428	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
1429	ENDIF
1430
1431	CASE ( 'ws' )
1432	IF ( .NOT. passive_scalar ) THEN
1433	IF ( myid == 0 ) THEN
1434	PRINT*, '+++ check_parameters: data_output_pr = ', &
1435	data_output_pr(i), &
1436	' is not implemented for passive_scalar = FALSE'
1437	ENDIF
1438	CALL local_stop
1439	ELSE
1440	dopr_index(i) = 49
1441	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
1442	ENDIF
1443
1444	CASE ( 'ws' )
1445	IF ( .NOT. passive_scalar ) THEN
1446	IF ( myid == 0 ) THEN
1447	PRINT*, '+++ check_parameters: data_output_pr = ', &
1448	data_output_pr(i), &
1449	' is not implemented for passive_scalar = FALSE'
1450	ENDIF
1451	CALL local_stop
1452	ELSE
1453	dopr_index(i) = 50
1454	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
1455	ENDIF
1456
1457	CASE ( 'w"qv"' )
1458	IF ( moisture .AND. .NOT. cloud_physics ) &
1459	THEN
1460	dopr_index(i) = 48
1461	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
1462	ELSEIF( moisture .AND. cloud_physics ) THEN
1463	dopr_index(i) = 51
1464	hom(:,2,51,:) = SPREAD( zw, 2, statistic_regions+1 )
1465	ELSE
1466	IF ( myid == 0 ) THEN
1467	PRINT*, '+++ check_parameters: data_output_pr = ', &
1468	data_output_pr(i), &
1469	' is not implemented for cloud_physics = FALSE', &
1470	' and moisture = FALSE'
1471	ENDIF
1472	CALL local_stop
1473	ENDIF
1474
1475	CASE ( 'wqv' )
1476	IF ( moisture .AND. .NOT. cloud_physics ) &
1477	THEN
1478	dopr_index(i) = 49
1479	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
1480	ELSEIF( moisture .AND. cloud_physics ) THEN
1481	dopr_index(i) = 52
1482	hom(:,2,52,:) = SPREAD( zw, 2, statistic_regions+1 )
1483	ELSE
1484	IF ( myid == 0 ) THEN
1485	PRINT*, '+++ check_parameters: data_output_pr = ', &
1486	data_output_pr(i), &
1487	' is not implemented for cloud_physics = FALSE', &
1488	' and moisture = FALSE'
1489	ENDIF
1490	CALL local_stop
1491	ENDIF
1492
1493	CASE ( 'wqv' )
1494	IF ( moisture .AND. .NOT. cloud_physics ) &
1495	THEN
1496	dopr_index(i) = 50
1497	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
1498	ELSEIF( moisture .AND. cloud_physics ) THEN
1499	dopr_index(i) = 53
1500	hom(:,2,53,:) = SPREAD( zw, 2, statistic_regions+1 )
1501	ELSE
1502	IF ( myid == 0 ) THEN
1503	PRINT*, '+++ check_parameters: data_output_pr = ', &
1504	data_output_pr(i), &
1505	' is not implemented for cloud_physics = FALSE', &
1506	' and moisture = FALSE'
1507	ENDIF
1508	CALL local_stop
1509	ENDIF
1510
1511	CASE ( 'ql' )
1512	IF ( .NOT. cloud_physics .AND. .NOT. cloud_droplets ) THEN
1513	IF ( myid == 0 ) THEN
1514	PRINT*, '+++ check_parameters: data_output_pr = ', &
1515	data_output_pr(i), &
1516	' is not implemented for cloud_physics = FALSE'
1517	ENDIF
1518	CALL local_stop
1519	ELSE
1520	dopr_index(i) = 54
1521	hom(:,2,54,:) = SPREAD( zu, 2, statistic_regions+1 )
1522	ENDIF
1523
1524	CASE ( 'wuu*/dz' )
1525	dopr_index(i) = 55
1526	hom(:,2,55,:) = SPREAD( zu, 2, statistic_regions+1 )
1527
1528	CASE ( 'wp/dz' )
1529	dopr_index(i) = 56
1530	hom(:,2,56,:) = SPREAD( zu, 2, statistic_regions+1 )
1531
1532	CASE ( 'w"e/dz' )
1533	dopr_index(i) = 57
1534	hom(:,2,57,:) = SPREAD( zu, 2, statistic_regions+1 )
1535
1536	CASE ( 'u"pt"' )
1537	dopr_index(i) = 58
1538	hom(:,2,58,:) = SPREAD( zu, 2, statistic_regions+1 )
1539
1540	CASE ( 'upt' )
1541	dopr_index(i) = 59
1542	hom(:,2,59,:) = SPREAD( zu, 2, statistic_regions+1 )
1543
1544	CASE ( 'upt_t' )
1545	dopr_index(i) = 60
1546	hom(:,2,60,:) = SPREAD( zu, 2, statistic_regions+1 )
1547
1548	CASE ( 'v"pt"' )
1549	dopr_index(i) = 61
1550	hom(:,2,61,:) = SPREAD( zu, 2, statistic_regions+1 )
1551
1552	CASE ( 'vpt' )
1553	dopr_index(i) = 62
1554	hom(:,2,62,:) = SPREAD( zu, 2, statistic_regions+1 )
1555
1556	CASE ( 'vpt_t' )
1557	dopr_index(i) = 63
1558	hom(:,2,63,:) = SPREAD( zu, 2, statistic_regions+1 )
1559
1560
1561	CASE DEFAULT
1562	IF ( myid == 0 ) THEN
1563	PRINT*, '+++ check_parameters: unknown output profile: ', &
1564	'data_output_pr = ', data_output_pr(i)
1565	ENDIF
1566	CALL local_stop
1567
1568	END SELECT
1569	!
1570	!-- Check to which of the predefined coordinate systems the profile belongs
1571	DO k = 1, crmax
1572	IF ( INDEX( cross_profiles(k), ' '//TRIM( data_output_pr(i) )//' ' ) &
1573	/=0 ) &
1574	THEN
1575	dopr_crossindex(i) = k
1576	EXIT
1577	ENDIF
1578	ENDDO
1579	!
1580	!-- Generate the text for the labels of the PROFIL output file. "-characters
1581	!-- must be substituted, otherwise PROFIL would interpret them as TeX
1582	!-- control characters
1583	dopr_label(i) = data_output_pr(i)
1584	position = INDEX( dopr_label(i) , '"' )
1585	DO WHILE ( position /= 0 )
1586	dopr_label(i)(position:position) = ''''
1587	position = INDEX( dopr_label(i) , '"' )
1588	ENDDO
1589
1590	ENDDO
1591
1592	!
1593	!-- y-value range of the coordinate system (PROFIL).
1594	!-- x-value range determined in plot_1d.
1595	cross_uymin = 0.0
1596	IF ( z_max_do1d == -1.0 ) THEN
1597	cross_uymax = zu(nzt+1)
1598	ELSEIF ( z_max_do1d < zu(nzb+1) .OR. z_max_do1d > zu(nzt+1) ) THEN
1599	IF ( myid == 0 ) PRINT*, '+++ check_parameters: z_max_do1d=', &
1600	z_max_do1d,' must be >= ', zu(nzb+1), &
1601	' or <= ', zu(nzt+1)
1602	CALL local_stop
1603	ELSE
1604	cross_uymax = z_max_do1d
1605	ENDIF
1606
1607	!
1608	!-- Check whether the chosen normalizing factor for the coordinate systems is
1609	!-- permissible
1610	DO i = 1, crmax
1611	SELECT CASE ( TRIM( cross_normalized_x(i) ) ) ! TRIM required on IBM
1612
1613	CASE ( '', 'wpt0', 'ws2', 'tsw2', 'ws3', 'ws2tsw', 'wstsw2' )
1614	j = 0
1615
1616	CASE DEFAULT
1617	IF ( myid == 0 ) THEN
1618	PRINT*, '+++ check_parameters: unknown normalize method'
1619	PRINT*, ' cross_normalized_x="',cross_normalized_x(i),'"'
1620	ENDIF
1621	CALL local_stop
1622
1623	END SELECT
1624	SELECT CASE ( TRIM( cross_normalized_y(i) ) ) ! TRIM required on IBM
1625
1626	CASE ( '', 'z_i' )
1627	j = 0
1628
1629	CASE DEFAULT
1630	IF ( myid == 0 ) THEN
1631	PRINT*, '+++ check_parameters: unknown normalize method'
1632	PRINT*, ' cross_normalized_y="',cross_normalized_y(i),'"'
1633	ENDIF
1634	CALL local_stop
1635
1636	END SELECT
1637	ENDDO
1638	!
1639	!-- Check normalized y-value range of the coordinate system (PROFIL)
1640	IF ( z_max_do1d_normalized /= -1.0 .AND. z_max_do1d_normalized <= 0.0 ) &
1641	THEN
1642	IF ( myid == 0 ) PRINT*,'+++ check_parameters: z_max_do1d_normalize', &
1643	'd=', z_max_do1d_normalized, ' must be >= 0.0'
1644	CALL local_stop
1645	ENDIF
1646
1647	!
1648	!-- Determine parameters for time series output and check whether permissible
1649	i = 0
1650	DO WHILE ( data_output_ts(i+1) /= ' ' .AND. i+1 <= 100 )
1651
1652	dots_n = dots_n + 1
1653	i = i + 1
1654	!
1655	!-- Check whether time series is permissible and determine internal number
1656	SELECT CASE ( TRIM( data_output_ts(i) ) )
1657
1658	CASE ( 'E' )
1659	dots_index(i) = 1
1660	CASE ( 'E*' )
1661	dots_index(i) = 2
1662	CASE ( 'dt' )
1663	dots_index(i) = 3
1664	CASE ( 'u*' )
1665	dots_index(i) = 4
1666	CASE ( 'th*' )
1667	dots_index(i) = 5
1668	CASE ( 'umax' )
1669	dots_index(i) = 6
1670	CASE ( 'vmax' )
1671	dots_index(i) = 7
1672	CASE ( 'wmax' )
1673	dots_index(i) = 8
1674	CASE ( 'div_new' )
1675	dots_index(i) = 9
1676	CASE ( 'div_old' )
1677	dots_index(i) = 10
1678	CASE ( 'z_i_wpt' )
1679	dots_index(i) = 11
1680	CASE ( 'z_i_pt' )
1681	dots_index(i) = 12
1682	CASE ( 'w*' )
1683	dots_index(i) = 13
1684	CASE ( 'w"pt"0' )
1685	dots_index(i) = 14
1686	CASE ( 'w"pt"' )
1687	dots_index(i) = 15
1688	CASE ( 'wpt' )
1689	dots_index(i) = 16
1690	CASE ( 'pt(0)' )
1691	dots_index(i) = 17
1692	CASE ( 'pt(zp)' )
1693	dots_index(i) = 18
1694	CASE ( 'splptx' )
1695	dots_index(i) = 19
1696	CASE ( 'splpty' )
1697	dots_index(i) = 20
1698	CASE ( 'splptz' )
1699	dots_index(i) = 21
1700	CASE ( 'L' )
1701	dots_index(i) = 22
1702
1703	CASE DEFAULT
1704	IF ( myid == 0 ) THEN
1705	PRINT*, '+++ check_parameters: unknown time series: ', &
1706	'data_output_ts = ',&
1707	data_output_ts(i)
1708	ENDIF
1709	CALL local_stop
1710
1711	END SELECT
1712
1713	!
1714	!-- Check, to which predefined coordinate system the time series belongs, and
1715	!-- store corresponding internal number. Furthermore determine, how many and
1716	!-- which graphs are being drawn into the corresponding system
1717	DO k = 1, crmax
1718	IF ( INDEX( cross_ts_profiles(k), ' ' // TRIM( data_output_ts(i) ) &
1719	// ' ' ) /=0 ) &
1720	THEN
1721	dots_crossindex(i) = k
1722	cross_ts_number_count(k) = cross_ts_number_count(k) + 1
1723	cross_ts_numbers(cross_ts_number_count(k),k) = dots_index(i)
1724	EXIT
1725	ENDIF
1726	ENDDO
1727
1728	ENDDO
1729
1730	!
1731	!-- Append user-defined data output variables to the standard data output
1732	IF ( data_output_user(1) /= ' ' ) THEN
1733	i = 1
1734	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
1735	i = i + 1
1736	ENDDO
1737	j = 1
1738	DO WHILE ( data_output_user(j) /= ' ' .AND. j <= 100 )
1739	IF ( i > 100 ) THEN
1740	IF ( myid == 0 ) THEN
1741	PRINT*, '+++ check_parameters: number of output quantitities', &
1742	' given by data_output and data_output_user'
1743	PRINT*, ' exceeds the limit of 100'
1744	ENDIF
1745	CALL local_stop
1746	ENDIF
1747	data_output(i) = data_output_user(j)
1748	i = i + 1
1749	j = j + 1
1750	ENDDO
1751	ENDIF
1752
1753	!
1754	!-- Check and set steering parameters for 2d/3d data output and averaging
1755	i = 1
1756	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
1757	!
1758	!-- Check for data averaging
1759	ilen = LEN_TRIM( data_output(i) )
1760	j = 0 ! no data averaging
1761	IF ( ilen > 3 ) THEN
1762	IF ( data_output(i)(ilen-2:ilen) == '_av' ) THEN
1763	j = 1 ! data averaging
1764	data_output(i) = data_output(i)(1:ilen-3)
1765	ENDIF
1766	ENDIF
1767	!
1768	!-- Check for cross section or volume data
1769	ilen = LEN_TRIM( data_output(i) )
1770	k = 0 ! 3d data
1771	var = data_output(i)(1:ilen)
1772	IF ( ilen > 3 ) THEN
1773	IF ( data_output(i)(ilen-2:ilen) == '_xy' .OR. &
1774	data_output(i)(ilen-2:ilen) == '_xz' .OR. &
1775	data_output(i)(ilen-2:ilen) == '_yz' ) THEN
1776	k = 1 ! 2d data
1777	var = data_output(i)(1:ilen-3)
1778	ENDIF
1779	ENDIF
1780	!
1781	!-- Check for allowed value and set units
1782	SELECT CASE ( TRIM( var ) )
1783
1784	CASE ( 'e' )
1785	IF ( constant_diffusion ) THEN
1786	IF ( myid == 0 ) THEN
1787	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
1788	'" requires constant_diffusion = .FALSE.'
1789	ENDIF
1790	CALL local_stop
1791	ENDIF
1792	unit = 'm2/s2'
1793
1794	CASE ( 'pc', 'pr' )
1795	IF ( .NOT. particle_advection ) THEN
1796	IF ( myid == 0 ) THEN
1797	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
1798	'" requires particle package'
1799	PRINT*, ' (mrun-option "-p particles")'
1800	ENDIF
1801	CALL local_stop
1802	ENDIF
1803	IF ( TRIM( var ) == 'pc' ) unit = 'number'
1804	IF ( TRIM( var ) == 'pr' ) unit = 'm'
1805
1806	CASE ( 'q', 'vpt' )
1807	IF ( .NOT. moisture ) THEN
1808	IF ( myid == 0 ) THEN
1809	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
1810	'" requires moisture = .TRUE.'
1811	ENDIF
1812	CALL local_stop
1813	ENDIF
1814	IF ( TRIM( var ) == 'q' ) unit = 'kg/kg'
1815	IF ( TRIM( var ) == 'vpt' ) unit = 'K'
1816
1817	CASE ( 'ql' )
1818	IF ( .NOT. ( cloud_physics .OR. cloud_droplets ) ) THEN
1819	IF ( myid == 0 ) THEN
1820	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
1821	'" requires cloud_physics = .TRUE.'
1822	PRINT*, ' or cloud_droplets = .TRUE.'
1823	ENDIF
1824	CALL local_stop
1825	ENDIF
1826	unit = 'kg/kg'
1827
1828	CASE ( 'ql_c', 'ql_v', 'ql_vp' )
1829	IF ( .NOT. cloud_droplets ) THEN
1830	IF ( myid == 0 ) THEN
1831	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
1832	'" requires cloud_droplets = .TRUE.'
1833	ENDIF
1834	CALL local_stop
1835	ENDIF
1836	IF ( TRIM( var ) == 'ql_c' ) unit = 'kg/kg'
1837	IF ( TRIM( var ) == 'ql_v' ) unit = 'm3'
1838	IF ( TRIM( var ) == 'ql_vp' ) unit = 'none'
1839
1840	CASE ( 'qv' )
1841	IF ( .NOT. cloud_physics ) THEN
1842	IF ( myid == 0 ) THEN
1843	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
1844	'" requires cloud_physics = .TRUE.'
1845	ENDIF
1846	CALL local_stop
1847	ENDIF
1848	unit = 'kg/kg'
1849
1850	CASE ( 's' )
1851	IF ( .NOT. passive_scalar ) THEN
1852	IF ( myid == 0 ) THEN
1853	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
1854	'" requires passive_scalar = .TRUE.'
1855	ENDIF
1856	CALL local_stop
1857	ENDIF
1858	unit = 'conc'
1859
1860	CASE ( 'u', 't', 'lwp*' )
1861	IF ( k == 0 .OR. data_output(i)(ilen-2:ilen) /= '_xy' ) THEN
1862	IF ( myid == 0 ) THEN
1863	PRINT*, '+++ check_parameters: illegal value for data_',&
1864	'output: "', TRIM( var ), '" is only allowed'
1865	PRINT*, ' for horizontal cross section'
1866	ENDIF
1867	CALL local_stop
1868	ENDIF
1869	IF ( TRIM( var ) == 'lwp*' .AND. .NOT. cloud_physics ) THEN
1870	IF ( myid == 0 ) THEN
1871	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
1872	'" requires cloud_physics = .TRUE.'
1873	ENDIF
1874	CALL local_stop
1875	ENDIF
1876	IF ( TRIM( var ) == 'u*' ) unit = 'm/s'
1877	IF ( TRIM( var ) == 't*' ) unit = 'K'
1878	IF ( TRIM( var ) == 'lwp' ) unit = 'kg/kgm'
1879
1880	CASE ( 'p', 'pt', 'u', 'v', 'w' )
1881	IF ( TRIM( var ) == 'p' ) unit = 'Pa'
1882	IF ( TRIM( var ) == 'pt' ) unit = 'K'
1883	IF ( TRIM( var ) == 'u' ) unit = 'm/s'
1884	IF ( TRIM( var ) == 'v' ) unit = 'm/s'
1885	IF ( TRIM( var ) == 'w' ) unit = 'm/s'
1886	CONTINUE
1887
1888	CASE DEFAULT
1889	CALL user_check_data_output( var, unit )
1890
1891	IF ( unit == 'illegal' ) THEN
1892	IF ( myid == 0 ) THEN
1893	IF ( data_output_user(1) /= ' ' ) THEN
1894	PRINT*, '+++ check_parameters: illegal value for data_',&
1895	'output or data_output_user: "', &
1896	TRIM( data_output(i) ), '"'
1897	ELSE
1898	PRINT*, '+++ check_parameters: illegal value for data_',&
1899	'output: "', TRIM( data_output(i) ), '"'
1900	ENDIF
1901	ENDIF
1902	CALL local_stop
1903	ENDIF
1904
1905	END SELECT
1906	!
1907	!-- Set the internal steering parameters appropriately
1908	IF ( k == 0 ) THEN
1909	do3d_no(j) = do3d_no(j) + 1
1910	do3d(j,do3d_no(j)) = data_output(i)
1911	do3d_unit(j,do3d_no(j)) = unit
1912	ELSE
1913	do2d_no(j) = do2d_no(j) + 1
1914	do2d(j,do2d_no(j)) = data_output(i)
1915	do2d_unit(j,do2d_no(j)) = unit
1916	IF ( data_output(i)(ilen-2:ilen) == '_xy' ) THEN
1917	data_output_xy(j) = .TRUE.
1918	ENDIF
1919	IF ( data_output(i)(ilen-2:ilen) == '_xz' ) THEN
1920	data_output_xz(j) = .TRUE.
1921	ENDIF
1922	IF ( data_output(i)(ilen-2:ilen) == '_yz' ) THEN
1923	data_output_yz(j) = .TRUE.
1924	ENDIF
1925	ENDIF
1926
1927	IF ( j == 1 ) THEN
1928	!
1929	!-- Check, if variable is already subject to averaging
1930	found = .FALSE.
1931	DO k = 1, doav_n
1932	IF ( TRIM( doav(k) ) == TRIM( var ) ) found = .TRUE.
1933	ENDDO
1934
1935	IF ( .NOT. found ) THEN
1936	doav_n = doav_n + 1
1937	doav(doav_n) = var
1938	ENDIF
1939	ENDIF
1940
1941	i = i + 1
1942	ENDDO
1943
1944	!
1945	!-- Store sectional planes in one shared array
1946	section(:,1) = section_xy
1947	section(:,2) = section_xz
1948	section(:,3) = section_yz
1949
1950	!
1951	!-- Upper plot limit (grid point value) for 1D profiles
1952	IF ( z_max_do1d == -1.0 ) THEN
1953	nz_do1d = nzt+1
1954	ELSE
1955	DO k = nzb+1, nzt+1
1956	nz_do1d = k
1957	IF ( zw(k) > z_max_do1d ) EXIT
1958	ENDDO
1959	ENDIF
1960
1961	!
1962	!-- Upper plot limit for 2D vertical sections
1963	IF ( z_max_do2d == -1.0 ) z_max_do2d = zu(nzt)
1964	IF ( z_max_do2d < zu(nzb+1) .OR. z_max_do2d > zu(nzt) ) THEN
1965	IF ( myid == 0 ) PRINT*, '+++ check_parameters: z_max_do2d=', &
1966	z_max_do2d, ' must be >= ', zu(nzb+1), &
1967	'(zu(nzb+1)) and <= ', zu(nzt), ' (zu(nzt))'
1968	CALL local_stop
1969	ENDIF
1970
1971	!
1972	!-- Upper plot limit for 3D arrays
1973	IF ( nz_do3d == -9999 ) nz_do3d = nzt + 1
1974
1975	!
1976	!-- Determine and check accuracy for compressed 3D plot output
1977	IF ( do3d_compress ) THEN
1978	!
1979	!-- Compression only permissible on T3E machines
1980	IF ( host(1:3) /= 't3e' ) THEN
1981	IF ( myid == 0 ) THEN
1982	PRINT*, '+++ check_parameters: do3d_compress = .TRUE. not allow', &
1983	'ed on host "', TRIM( host ), '"'
1984	ENDIF
1985	CALL local_stop
1986	ENDIF
1987
1988	i = 1
1989	DO WHILE ( do3d_comp_prec(i) /= ' ' )
1990
1991	ilen = LEN_TRIM( do3d_comp_prec(i) )
1992	IF ( LLT( do3d_comp_prec(i)(ilen:ilen), '0' ) .OR. &
1993	LGT( do3d_comp_prec(i)(ilen:ilen), '9' ) ) THEN
1994	IF ( myid == 0 ) THEN
1995	PRINT*, '+++ check_parameters: illegal precision: ', &
1996	'do3d_comp_prec(', i, ')="', TRIM(do3d_comp_prec(i)),'"'
1997	ENDIF
1998	CALL local_stop
1999	ENDIF
2000
2001	prec = IACHAR( do3d_comp_prec(i)(ilen:ilen) ) - IACHAR( '0' )
2002	var = do3d_comp_prec(i)(1:ilen-1)
2003
2004	SELECT CASE ( var )
2005
2006	CASE ( 'u' )
2007	j = 1
2008	CASE ( 'v' )
2009	j = 2
2010	CASE ( 'w' )
2011	j = 3
2012	CASE ( 'p' )
2013	j = 4
2014	CASE ( 'pt' )
2015	j = 5
2016
2017	CASE DEFAULT
2018	IF ( myid == 0 ) THEN
2019	PRINT*, '+++ check_parameters: unknown variable in ', &
2020	'assignment'
2021	PRINT*, ' do3d_comp_prec(', i, ')="', &
2022	TRIM( do3d_comp_prec(i) ),'"'
2023	ENDIF
2024	CALL local_stop
2025
2026	END SELECT
2027
2028	plot_3d_precision(j)%precision = prec
2029	i = i + 1
2030
2031	ENDDO
2032	ENDIF
2033
2034	!
2035	!-- Check the data output format(s)
2036	IF ( data_output_format(1) == ' ' ) THEN
2037	!
2038	!-- Default value
2039	netcdf_output = .TRUE.
2040	ELSE
2041	i = 1
2042	DO WHILE ( data_output_format(i) /= ' ' )
2043
2044	SELECT CASE ( data_output_format(i) )
2045
2046	CASE ( 'netcdf' )
2047	netcdf_output = .TRUE.
2048	CASE ( 'iso2d' )
2049	iso2d_output = .TRUE.
2050	CASE ( 'profil' )
2051	profil_output = .TRUE.
2052	CASE ( 'avs' )
2053	avs_output = .TRUE.
2054
2055	CASE DEFAULT
2056	IF ( myid == 0 ) THEN
2057	PRINT*, '+++ check_parameters:'
2058	PRINT*, ' unknown value for data_output_format "', &
2059	TRIM( data_output_format(i) ),'"'
2060	ENDIF
2061	CALL local_stop
2062
2063	END SELECT
2064
2065	i = i + 1
2066	IF ( i > 10 ) EXIT
2067
2068	ENDDO
2069
2070	ENDIF
2071
2072	!
2073	!-- Check netcdf precison
2074	ldum = .FALSE.
2075	CALL define_netcdf_header( 'ch', ldum, 0 )
2076
2077	!
2078	!-- Check, whether a constant diffusion coefficient shall be used
2079	IF ( km_constant /= -1.0 ) THEN
2080	IF ( km_constant < 0.0 ) THEN
2081	IF ( myid == 0 ) PRINT*, '+++ check_parameters: km_constant=', &
2082	km_constant, ' < 0.0'
2083	CALL local_stop
2084	ELSE
2085	IF ( prandtl_number < 0.0 ) THEN
2086	IF ( myid == 0 ) PRINT*,'+++ check_parameters: prandtl_number=',&
2087	prandtl_number, ' < 0.0'
2088	CALL local_stop
2089	ENDIF
2090	constant_diffusion = .TRUE.
2091
2092	IF ( prandtl_layer ) THEN
2093	IF ( myid == 0 ) PRINT*, '+++ check_parameters: prandtl_layer ',&
2094	'is not allowed with fixed value of km'
2095	CALL local_stop
2096	ENDIF
2097	ENDIF
2098	ENDIF
2099
2100	!
2101	!-- In case of non-cyclic lateral boundaries, set the default maximum value
2102	!-- for the horizontal diffusivity used within the outflow damping layer,
2103	!-- and check/set the width of the damping layer
2104	IF ( bc_lr /= 'cyclic' ) THEN
2105	IF ( km_damp_max == -1.0 ) THEN
2106	km_damp_max = 0.5 * dx
2107	ENDIF
2108	IF ( outflow_damping_width == -1.0 ) THEN
2109	outflow_damping_width = MIN( 20, nx/2 )
2110	ENDIF
2111	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > nx ) THEN
2112	IF ( myid == 0 ) PRINT*, '+++ check_parameters: outflow_damping w',&
2113	'idth out of range'
2114	CALL local_stop
2115	ENDIF
2116	ENDIF
2117
2118	IF ( bc_ns /= 'cyclic' ) THEN
2119	IF ( km_damp_max == -1.0 ) THEN
2120	km_damp_max = 0.5 * dy
2121	ENDIF
2122	IF ( outflow_damping_width == -1.0 ) THEN
2123	outflow_damping_width = MIN( 20, ny/2 )
2124	ENDIF
2125	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > ny ) THEN
2126	IF ( myid == 0 ) PRINT*, '+++ check_parameters: outflow_damping w',&
2127	'idth out of range'
2128	CALL local_stop
2129	ENDIF
2130	ENDIF
2131
2132	!
2133	!-- Check value range for rif
2134	IF ( rif_min >= rif_max ) THEN
2135	IF ( myid == 0 ) PRINT*, '+++ check_parameters: rif_min=', rif_min, &
2136	' must be less than rif_max=', rif_max
2137	CALL local_stop
2138	ENDIF
2139
2140	!
2141	!-- Determine upper and lower hight level indices for random perturbations
2142	IF ( disturbance_level_b == -1.0 ) THEN
2143	disturbance_level_b = zu(nzb+3)
2144	disturbance_level_ind_b = nzb + 3
2145	ELSEIF ( disturbance_level_b < zu(3) ) THEN
2146	IF ( myid == 0 ) PRINT*, '+++ check_parameters: disturbance_level_b=',&
2147	disturbance_level_b, ' must be >= ',zu(3), &
2148	'(zu(3))'
2149	CALL local_stop
2150	ELSEIF ( disturbance_level_b > zu(nzt-2) ) THEN
2151	IF ( myid == 0 ) PRINT*, '+++ check_parameters: disturbance_level_b=',&
2152	disturbance_level_b, ' must be <= ',zu(nzt-2),&
2153	'(zu(nzt-2))'
2154	CALL local_stop
2155	ELSE
2156	DO k = 3, nzt-2
2157	IF ( disturbance_level_b <= zu(k) ) THEN
2158	disturbance_level_ind_b = k
2159	EXIT
2160	ENDIF
2161	ENDDO
2162	ENDIF
2163
2164	IF ( disturbance_level_t == -1.0 ) THEN
2165	disturbance_level_t = zu(nzt/3)
2166	disturbance_level_ind_t = nzt / 3
2167	ELSEIF ( disturbance_level_t > zu(nzt-2) ) THEN
2168	IF ( myid == 0 ) PRINT*, '+++ check_parameters: disturbance_level_t=',&
2169	disturbance_level_t, ' must be <= ',zu(nzt-2),&
2170	'(zu(nzt-2))'
2171	CALL local_stop
2172	ELSEIF ( disturbance_level_t < disturbance_level_b ) THEN
2173	IF ( myid == 0 ) PRINT*, '+++ check_parameters: disturbance_level_t=',&
2174	disturbance_level_t, ' must be >= ', &
2175	'disturbance_level_b=', disturbance_level_b
2176	CALL local_stop
2177	ELSE
2178	DO k = 3, nzt-2
2179	IF ( disturbance_level_t <= zu(k) ) THEN
2180	disturbance_level_ind_t = k
2181	EXIT
2182	ENDIF
2183	ENDDO
2184	ENDIF
2185
2186	!
2187	!-- Check again whether the levels determined this way are ok.
2188	!-- Error may occur at automatic determination and too few grid points in
2189	!-- z-direction.
2190	IF ( disturbance_level_ind_t < disturbance_level_ind_b ) THEN
2191	IF ( myid == 0 ) PRINT*, '+++ check_parameters: ', &
2192	'disturbance_level_ind_t=', &
2193	disturbance_level_ind_t, ' must be >= ', &
2194	'disturbance_level_ind_b=', &
2195	disturbance_level_ind_b
2196	CALL local_stop
2197	ENDIF
2198
2199	!
2200	!-- Determine the horizontal index range for random perturbations.
2201	!-- In case of non-cyclic horizontal boundaries, no perturbations are imposed
2202	!-- near the inflow and the perturbation area is further limited to ...(1)
2203	!-- after the initial phase of the flow.
2204	dist_nxl = 0; dist_nxr = nx
2205	dist_nys = 0; dist_nyn = ny
2206	IF ( bc_lr /= 'cyclic' ) THEN
2207	IF ( inflow_disturbance_begin == -1 ) THEN
2208	inflow_disturbance_begin = MIN( 10, nx/2 )
2209	ENDIF
2210	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > nx )&
2211	THEN
2212	IF ( myid == 0 ) PRINT*, '+++ check_parameters: inflow_disturbance',&
2213	'_begin out of range'
2214	CALL local_stop
2215	ENDIF
2216	IF ( inflow_disturbance_end == -1 ) THEN
2217	inflow_disturbance_end = MIN( 100, 3*nx/4 )
2218	ENDIF
2219	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > nx ) &
2220	THEN
2221	IF ( myid == 0 ) PRINT*, '+++ check_parameters: inflow_disturbance',&
2222	'_end out of range'
2223	CALL local_stop
2224	ENDIF
2225	ELSEIF ( bc_ns /= 'cyclic' ) THEN
2226	IF ( inflow_disturbance_begin == -1 ) THEN
2227	inflow_disturbance_begin = MIN( 10, ny/2 )
2228	ENDIF
2229	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > ny )&
2230	THEN
2231	IF ( myid == 0 ) PRINT*, '+++ check_parameters: inflow_disturbance',&
2232	'_begin out of range'
2233	CALL local_stop
2234	ENDIF
2235	IF ( inflow_disturbance_end == -1 ) THEN
2236	inflow_disturbance_end = MIN( 100, 3*ny/4 )
2237	ENDIF
2238	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > ny ) &
2239	THEN
2240	IF ( myid == 0 ) PRINT*, '+++ check_parameters: inflow_disturbance',&
2241	'_end out of range'
2242	CALL local_stop
2243	ENDIF
2244	ENDIF
2245
2246	IF ( outflow_l ) THEN
2247	dist_nxr = nx - inflow_disturbance_begin
2248	dist_nxl(1) = nx - inflow_disturbance_end
2249	ELSEIF ( outflow_r ) THEN
2250	dist_nxl = inflow_disturbance_begin
2251	dist_nxr(1) = inflow_disturbance_end
2252	ELSEIF ( outflow_s ) THEN
2253	dist_nyn = ny - inflow_disturbance_begin
2254	dist_nys(1) = ny - inflow_disturbance_end
2255	ELSEIF ( outflow_n ) THEN
2256	dist_nys = inflow_disturbance_begin
2257	dist_nyn(1) = inflow_disturbance_end
2258	ENDIF
2259
2260	!
2261	!-- Check random generator
2262	IF ( random_generator /= 'system-specific' .AND. &
2263	random_generator /= 'numerical-recipes' ) THEN
2264	IF ( myid == 0 ) THEN
2265	PRINT*, '+++ check_parameters:'
2266	PRINT*, ' unknown random generator: random_generator=', &
2267	random_generator
2268	ENDIF
2269	CALL local_stop
2270	ENDIF
2271
2272	!
2273	!-- Determine damping level index for 1D model
2274	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
2275	IF ( damp_level_1d == -1.0 ) THEN
2276	damp_level_1d = zu(nzt+1)
2277	damp_level_ind_1d = nzt + 1
2278	ELSEIF ( damp_level_1d < 0.0 .OR. damp_level_1d > zu(nzt+1) ) THEN
2279	IF ( myid == 0 ) PRINT*, '+++ check_parameters: damp_level_1d=', &
2280	damp_level_1d, ' must be > 0.0 and < ', &
2281	'zu(nzt+1)', zu(nzt+1)
2282	CALL local_stop
2283	ELSE
2284	DO k = 1, nzt+1
2285	IF ( damp_level_1d <= zu(k) ) THEN
2286	damp_level_ind_1d = k
2287	EXIT
2288	ENDIF
2289	ENDDO
2290	ENDIF
2291	ENDIF
2292	!
2293	!-- Check some other 1d-model parameters
2294	IF ( TRIM( mixing_length_1d ) /= 'as_in_3d_model' .AND. &
2295	TRIM( mixing_length_1d ) /= 'blackadar' ) THEN
2296	IF ( myid == 0 ) PRINT*, '+++ check_parameters: mixing_length_1d = "', &
2297	TRIM( mixing_length_1d ), '" is unknown'
2298	CALL local_stop
2299	ENDIF
2300	IF ( TRIM( dissipation_1d ) /= 'as_in_3d_model' .AND. &
2301	TRIM( dissipation_1d ) /= 'detering' ) THEN
2302	IF ( myid == 0 ) PRINT*, '+++ check_parameters: dissipation_1d = "', &
2303	TRIM( dissipation_1d ), '" is unknown'
2304	CALL local_stop
2305	ENDIF
2306
2307	!
2308	!-- Set time for the next user defined restart (time_restart is the
2309	!-- internal parameter for steering restart events)
2310	IF ( restart_time /= 9999999.9 ) THEN
2311	IF ( restart_time > simulated_time ) time_restart = restart_time
2312	ELSE
2313	!
2314	!-- In case of a restart run, set internal parameter to default (no restart)
2315	!-- if the NAMELIST-parameter restart_time is omitted
2316	time_restart = 9999999.9
2317	ENDIF
2318
2319	!
2320	!-- Set default value of the time needed to terminate a model run
2321	IF ( termination_time_needed == -1.0 ) THEN
2322	IF ( host(1:3) == 'ibm' ) THEN
2323	termination_time_needed = 300.0
2324	ELSE
2325	termination_time_needed = 35.0
2326	ENDIF
2327	ENDIF
2328
2329	!
2330	!-- Check the time needed to terminate a model run
2331	IF ( host(1:3) == 't3e' ) THEN
2332	!
2333	!-- Time needed must be at least 30 seconds on all CRAY machines, because
2334	!-- MPP_TREMAIN gives the remaining CPU time only in steps of 30 seconds
2335	IF ( termination_time_needed <= 30.0 ) THEN
2336	IF ( myid == 0 ) THEN
2337	PRINT*, '+++ check_parameters: termination_time_needed', &
2338	termination_time_needed
2339	PRINT*, ' must be > 30.0 on host "', host, &
2340	'"'
2341	ENDIF
2342	CALL local_stop
2343	ENDIF
2344	ELSEIF ( host(1:3) == 'ibm' ) THEN
2345	!
2346	!-- On IBM-regatta machines the time should be at least 300 seconds,
2347	!-- because the job time consumed before executing palm (for compiling,
2348	!-- copying of files, etc.) has to be regarded
2349	IF ( termination_time_needed < 300.0 ) THEN
2350	IF ( myid == 0 ) THEN
2351	PRINT*, '+++ WARNING: check_parameters: termination_time_', &
2352	'needed', termination_time_needed
2353	PRINT*, ' should be >= 300.0', &
2354	' on host "', host, '"'
2355	ENDIF
2356	ENDIF
2357	ENDIF
2358
2359
2360	END SUBROUTINE check_parameters

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |