Home

Context Navigation

source: palm/trunk/SOURCE/check_parameters.f90 @ 867

Last change on this file since 867 was 867, checked in by raasch, 12 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 131.8 KB

Line
1	SUBROUTINE check_parameters
2
3	!------------------------------------------------------------------------------!
4	! Current revisions:
5	! -----------------
6	!
7	!
8	! Former revisions:
9	! -----------------
10	! $Id: check_parameters.f90 867 2012-03-28 06:54:50Z raasch $
11	!
12	! 866 2012-03-28 06:44:41Z raasch
13	! use only 60% of the geostrophic wind as translation speed in case of Galilean
14	! transformation and use_ug_for_galilei_tr = .T. in order to mimimize the
15	! timestep
16	!
17	! 861 2012-03-26 14:18:34Z suehring
18	! Check for topography and ws-scheme removed.
19	! Check for loop_optimization = 'vector' and ws-scheme removed.
20	!
21	! 845 2012-03-07 10:23:05Z maronga
22	! Bugfix: exclude __netcdf4 directive part from namelist file check compilation
23	!
24	! 828 2012-02-21 12:00:36Z raasch
25	! check of collision_kernel extended
26	!
27	! 825 2012-02-19 03:03:44Z raasch
28	! check for collision_kernel and curvature_solution_effects
29	!
30	! 809 2012-01-30 13:32:58Z maronga
31	! Bugfix: replaced .AND. and .NOT. with && and ! in the preprocessor directives
32	!
33	! 807 2012-01-25 11:53:51Z maronga
34	! New cpp directive "__check" implemented which is used by check_namelist_files
35	!
36	! 774 2011-10-27 13:34:16Z letzel
37	! bugfix for prescribed u,v-profiles
38	!
39	! 767 2011-10-14 06:39:12Z raasch
40	! Calculating u,v-profiles from given profiles by linear interpolation.
41	! bugfix: dirichlet_0 conditions for ug/vg moved from init_3d_model to here
42	!
43	! 707 2011-03-29 11:39:40Z raasch
44	! setting of bc_lr/ns_dirrad/raddir
45	!
46	! 689 2011-02-20 19:31:12z gryschka
47	! Bugfix for some logical expressions
48	! (syntax was not compatible with all compilers)
49	!
50	! 680 2011-02-04 23:16:06Z gryschka
51	! init_vortex is not allowed with volume_flow_control
52	!
53	! 673 2011-01-18 16:19:48Z suehring
54	! Declaration of ws_scheme_sca and ws_scheme_mom added (moved from advec_ws).
55	!
56	! 667 2010-12-23 12:06:00Z suehring/gryschka
57	! Exchange of parameters between ocean and atmosphere via PE0
58	! Check for illegal combination of ws-scheme and timestep scheme.
59	! Check for topography and ws-scheme.
60	! Check for not cyclic boundary conditions in combination with ws-scheme and
61	! loop_optimization = 'vector'.
62	! Check for call_psolver_at_all_substeps and ws-scheme for momentum_advec.
63	! Different processor/grid topology in atmosphere and ocean is now allowed!
64	! Bugfixes in checking for conserve_volume_flow_mode
65	! 600 2010-11-24 16:10:51Z raasch
66	! change due to new default value of surface_waterflux
67	! 580 2010-10-05 13:59:11Z heinze
68	! renaming of ws_vertical_gradient_level to subs_vertical_gradient_level
69	!
70	! 567 2010-10-01 10:46:30Z helmke
71	! calculating masks changed
72	!
73	! 564 2010-09-30 13:18:59Z helmke
74	! palm message identifiers of masked output changed, 20 replaced by max_masks
75	!
76	! 553 2010-09-01 14:09:06Z weinreis
77	! masks is calculated and removed from inipar
78	!
79	! 531 2010-04-21 06:47:21Z heinze
80	! Bugfix: unit of hyp changed to dbar
81	!
82	! 524 2010-03-30 02:04:51Z raasch
83	! Bugfix: "/" in netcdf profile variable names replaced by ":"
84	!
85	! 493 2010-03-01 08:30:24Z raasch
86	! netcdf_data_format is checked
87	!
88	! 411 2009-12-11 14:15:58Z heinze
89	! Enabled passive scalar/humidity wall fluxes for non-flat topography
90	! Initialization of large scale vertical motion (subsidence/ascent)
91	!
92	! 410 2009-12-04 17:05:40Z letzel
93	! masked data output
94	!
95	! 388 2009-09-23 09:40:33Z raasch
96	! Check profiles fpr prho and hyp.
97	! Bugfix: output of averaged 2d/3d quantities requires that an avaraging
98	! interval has been set, respective error message is included
99	! bc_lr_cyc and bc_ns_cyc are set,
100	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
101	! Check for illegal entries in section_xy\|xz\|yz that exceed nz+1\|ny+1\|nx+1
102	! Coupling with independent precursor runs.
103	! Check particle_color, particle_dvrpsize, color_interval, dvrpsize_interval
104	! Bugfix: pressure included for profile output
105	! Check pressure gradient conditions
106	! topography_grid_convention moved from user_check_parameters
107	! 'single_street_canyon'
108	! Added shf* and qsws* to the list of available output data
109	!
110	! 222 2009-01-12 16:04:16Z letzel
111	! +user_check_parameters
112	! Output of messages replaced by message handling routine.
113	! Implementation of an MPI-1 coupling: replaced myid with target_id,
114	! deleted __mpi2 directives
115	! Check that PALM is called with mrun -K parallel for coupling
116	!
117	! 197 2008-09-16 15:29:03Z raasch
118	! Bug fix: Construction of vertical profiles when 10 gradients have been
119	! specified in the parameter list (ug, vg, pt, q, sa, lad)
120	!
121	! Strict grid matching along z is not needed for mg-solver.
122	! Leaf area density (LAD) explicitly set to its surface value at k=0
123	! Case of reading data for recycling included in initializing_actions,
124	! check of turbulent_inflow and calculation of recycling_plane.
125	! q*2 profile added
126	!
127	! 138 2007-11-28 10:03:58Z letzel
128	! Plant canopy added
129	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
130	! Multigrid solver allows topography, checking of dt_sort_particles
131	! Bugfix: initializing u_init and v_init in case of ocean runs
132	!
133	! 109 2007-08-28 15:26:47Z letzel
134	! Check coupling_mode and set default (obligatory) values (like boundary
135	! conditions for temperature and fluxes) in case of coupled runs.
136	! +profiles for wp and w"e
137	! Bugfix: Error message concerning output of particle concentration (pc)
138	! modified
139	! More checks and more default values for coupled runs
140	! allow data_output_pr= q, wq, w"q", wq for humidity = .T. (instead of
141	! cloud_physics = .T.)
142	! Rayleigh damping for ocean fixed.
143	! Check and, if necessary, set default value for dt_coupling
144	!
145	! 97 2007-06-21 08:23:15Z raasch
146	! Initial salinity profile is calculated, salinity boundary conditions are
147	! checked,
148	! z_max_do1d is checked only in case of ocean = .f.,
149	! +initial temperature and geostrophic velocity profiles for the ocean version,
150	! use_pt_reference renamed use_reference
151	!
152	! 89 2007-05-25 12:08:31Z raasch
153	! Check for user-defined profiles
154	!
155	! 75 2007-03-22 09:54:05Z raasch
156	! "by_user" allowed as initializing action, -data_output_ts,
157	! leapfrog with non-flat topography not allowed any more, loop_optimization
158	! and pt_reference are checked, moisture renamed humidity,
159	! output of precipitation amount/rate and roughnes length + check
160	! possible negative humidities are avoided in initial profile,
161	! dirichlet/neumann changed to dirichlet/radiation, etc.,
162	! revision added to run_description_header
163	!
164	! 20 2007-02-26 00:12:32Z raasch
165	! Temperature and humidity gradients at top are now calculated for nzt+1,
166	! top_heatflux and respective boundary condition bc_pt_t is checked
167	!
168	! RCS Log replace by Id keyword, revision history cleaned up
169	!
170	! Revision 1.61 2006/08/04 14:20:25 raasch
171	! do2d_unit and do3d_unit now defined as 2d-arrays, check of
172	! use_upstream_for_tke, default value for dt_dopts,
173	! generation of file header moved from routines palm and header to here
174	!
175	! Revision 1.1 1997/08/26 06:29:23 raasch
176	! Initial revision
177	!
178	!
179	! Description:
180	! ------------
181	! Check control parameters and deduce further quantities.
182	!------------------------------------------------------------------------------!
183
184	USE arrays_3d
185	USE cloud_parameters
186	USE constants
187	USE control_parameters
188	USE dvrp_variables
189	USE grid_variables
190	USE indices
191	USE model_1d
192	USE netcdf_control
193	USE particle_attributes
194	USE pegrid
195	USE profil_parameter
196	USE subsidence_mod
197	USE statistics
198	USE transpose_indices
199
200	IMPLICIT NONE
201
202	CHARACTER (LEN=1) :: sq
203	CHARACTER (LEN=6) :: var
204	CHARACTER (LEN=7) :: unit
205	CHARACTER (LEN=8) :: date
206	CHARACTER (LEN=10) :: time
207	CHARACTER (LEN=40) :: coupling_string
208	CHARACTER (LEN=100) :: action
209
210	INTEGER :: i, ilen, intervals, iremote = 0, iter, j, k, kk, nnxh, nnyh, &
211	position, prec
212	LOGICAL :: found, ldum
213	REAL :: gradient, maxn, maxp, remote = 0.0, &
214	simulation_time_since_reference
215
216	!
217	!-- Warning, if host is not set
218	IF ( host(1:1) == ' ' ) THEN
219	message_string = '"host" is not set. Please check that environment ' // &
220	'variable "localhost" & is set before running PALM'
221	CALL message( 'check_parameters', 'PA0001', 0, 0, 0, 6, 0 )
222	ENDIF
223
224	!
225	!-- Check the coupling mode
226	IF ( coupling_mode /= 'uncoupled' .AND. &
227	coupling_mode /= 'atmosphere_to_ocean' .AND. &
228	coupling_mode /= 'ocean_to_atmosphere' ) THEN
229	message_string = 'illegal coupling mode: ' // TRIM( coupling_mode )
230	CALL message( 'check_parameters', 'PA0002', 1, 2, 0, 6, 0 )
231	ENDIF
232
233	!
234	!-- Check dt_coupling, restart_time, dt_restart, end_time, dx, dy, nx and ny
235	IF ( coupling_mode /= 'uncoupled') THEN
236
237	IF ( dt_coupling == 9999999.9 ) THEN
238	message_string = 'dt_coupling is not set but required for coup' // &
239	'ling mode "' // TRIM( coupling_mode ) // '"'
240	CALL message( 'check_parameters', 'PA0003', 1, 2, 0, 6, 0 )
241	ENDIF
242
243	#if defined( __parallel )
244
245	!
246	!-- NOTE: coupled runs have not been implemented in the check_namelist_files
247	!-- program.
248	!-- check_namelist_files will need the following information of the other
249	!-- model (atmosphere/ocean).
250	! dt_coupling = remote
251	! dt_max = remote
252	! restart_time = remote
253	! dt_restart= remote
254	! simulation_time_since_reference = remote
255	! dx = remote
256
257
258	#if ! defined( __check )
259	IF ( myid == 0 ) THEN
260	CALL MPI_SEND( dt_coupling, 1, MPI_REAL, target_id, 11, comm_inter, &
261	ierr )
262	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 11, comm_inter, &
263	status, ierr )
264	ENDIF
265	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
266	#endif
267	IF ( dt_coupling /= remote ) THEN
268	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
269	'": dt_coupling = ', dt_coupling, '& is not equal to ', &
270	'dt_coupling_remote = ', remote
271	CALL message( 'check_parameters', 'PA0004', 1, 2, 0, 6, 0 )
272	ENDIF
273	IF ( dt_coupling <= 0.0 ) THEN
274	#if ! defined( __check )
275	IF ( myid == 0 ) THEN
276	CALL MPI_SEND( dt_max, 1, MPI_REAL, target_id, 19, comm_inter, ierr )
277	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 19, comm_inter, &
278	status, ierr )
279	ENDIF
280	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
281	#endif
282	dt_coupling = MAX( dt_max, remote )
283	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
284	'": dt_coupling <= 0.0 & is not allowed and is reset to ', &
285	'MAX(dt_max(A,O)) = ', dt_coupling
286	CALL message( 'check_parameters', 'PA0005', 0, 1, 0, 6, 0 )
287	ENDIF
288	#if ! defined( __check )
289	IF ( myid == 0 ) THEN
290	CALL MPI_SEND( restart_time, 1, MPI_REAL, target_id, 12, comm_inter, &
291	ierr )
292	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 12, comm_inter, &
293	status, ierr )
294	ENDIF
295	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
296	#endif
297	IF ( restart_time /= remote ) THEN
298	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
299	'": restart_time = ', restart_time, '& is not equal to ', &
300	'restart_time_remote = ', remote
301	CALL message( 'check_parameters', 'PA0006', 1, 2, 0, 6, 0 )
302	ENDIF
303	#if ! defined( __check )
304	IF ( myid == 0 ) THEN
305	CALL MPI_SEND( dt_restart, 1, MPI_REAL, target_id, 13, comm_inter, &
306	ierr )
307	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 13, comm_inter, &
308	status, ierr )
309	ENDIF
310	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
311	#endif
312	IF ( dt_restart /= remote ) THEN
313	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
314	'": dt_restart = ', dt_restart, '& is not equal to ', &
315	'dt_restart_remote = ', remote
316	CALL message( 'check_parameters', 'PA0007', 1, 2, 0, 6, 0 )
317	ENDIF
318
319	simulation_time_since_reference = end_time - coupling_start_time
320	#if ! defined( __check )
321	IF ( myid == 0 ) THEN
322	CALL MPI_SEND( simulation_time_since_reference, 1, MPI_REAL, target_id, &
323	14, comm_inter, ierr )
324	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 14, comm_inter, &
325	status, ierr )
326	ENDIF
327	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
328	#endif
329	IF ( simulation_time_since_reference /= remote ) THEN
330	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
331	'": simulation_time_since_reference = ', &
332	simulation_time_since_reference, '& is not equal to ', &
333	'simulation_time_since_reference_remote = ', remote
334	CALL message( 'check_parameters', 'PA0008', 1, 2, 0, 6, 0 )
335	ENDIF
336
337	#if ! defined( __check )
338	IF ( myid == 0 ) THEN
339	CALL MPI_SEND( dx, 1, MPI_REAL, target_id, 15, comm_inter, ierr )
340	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 15, comm_inter, &
341	status, ierr )
342	ENDIF
343	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
344
345	#endif
346	IF ( coupling_mode == 'atmosphere_to_ocean') THEN
347
348	IF ( dx < remote ) THEN
349	WRITE( message_string, * ) 'coupling mode "', &
350	TRIM( coupling_mode ), &
351	'": dx in Atmosphere is not equal to or not larger then dx in ocean'
352	CALL message( 'check_parameters', 'PA0009', 1, 2, 0, 6, 0 )
353	ENDIF
354
355	IF ( (nx_a+1)dx /= (nx_o+1)remote ) THEN
356	WRITE( message_string, * ) 'coupling mode "', &
357	TRIM( coupling_mode ), &
358	'": Domain size in x-direction is not equal in ocean and atmosphere'
359	CALL message( 'check_parameters', 'PA0010', 1, 2, 0, 6, 0 )
360	ENDIF
361
362	ENDIF
363
364	#if ! defined( __check )
365	IF ( myid == 0) THEN
366	CALL MPI_SEND( dy, 1, MPI_REAL, target_id, 16, comm_inter, ierr )
367	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 16, comm_inter, &
368	status, ierr )
369	ENDIF
370	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
371	#endif
372	IF ( coupling_mode == 'atmosphere_to_ocean') THEN
373
374	IF ( dy < remote ) THEN
375	WRITE( message_string, * ) 'coupling mode "', &
376	TRIM( coupling_mode ), &
377	'": dy in Atmosphere is not equal to or not larger then dy in ocean'
378	CALL message( 'check_parameters', 'PA0011', 1, 2, 0, 6, 0 )
379	ENDIF
380
381	IF ( (ny_a+1)dy /= (ny_o+1)remote ) THEN
382	WRITE( message_string, * ) 'coupling mode "', &
383	TRIM( coupling_mode ), &
384	'": Domain size in y-direction is not equal in ocean and atmosphere'
385	CALL message( 'check_parameters', 'PA0012', 1, 2, 0, 6, 0 )
386	ENDIF
387
388	IF ( MOD(nx_o+1,nx_a+1) /= 0 ) THEN
389	WRITE( message_string, * ) 'coupling mode "', &
390	TRIM( coupling_mode ), &
391	'": nx+1 in ocean is not divisible without remainder with nx+1 in', &
392	' atmosphere'
393	CALL message( 'check_parameters', 'PA0339', 1, 2, 0, 6, 0 )
394	ENDIF
395
396	IF ( MOD(ny_o+1,ny_a+1) /= 0 ) THEN
397	WRITE( message_string, * ) 'coupling mode "', &
398	TRIM( coupling_mode ), &
399	'": ny+1 in ocean is not divisible without remainder with ny+1 in', &
400	' atmosphere'
401	CALL message( 'check_parameters', 'PA0340', 1, 2, 0, 6, 0 )
402	ENDIF
403
404	ENDIF
405	#else
406	WRITE( message_string, * ) 'coupling requires PALM to be called with', &
407	' ''mrun -K parallel'''
408	CALL message( 'check_parameters', 'PA0141', 1, 2, 0, 6, 0 )
409	#endif
410	ENDIF
411
412	#if defined( __parallel ) && ! defined ( __check )
413	!
414	!-- Exchange via intercommunicator
415	IF ( coupling_mode == 'atmosphere_to_ocean' .AND. myid == 0 ) THEN
416	CALL MPI_SEND( humidity, 1, MPI_LOGICAL, target_id, 19, comm_inter, &
417	ierr )
418	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' .AND. myid == 0) THEN
419	CALL MPI_RECV( humidity_remote, 1, MPI_LOGICAL, target_id, 19, &
420	comm_inter, status, ierr )
421	ENDIF
422	CALL MPI_BCAST( humidity_remote, 1, MPI_LOGICAL, 0, comm2d, ierr)
423
424	#endif
425
426
427	!
428	!-- Generate the file header which is used as a header for most of PALM's
429	!-- output files
430	CALL DATE_AND_TIME( date, time )
431	run_date = date(7:8)//'-'//date(5:6)//'-'//date(3:4)
432	run_time = time(1:2)//':'//time(3:4)//':'//time(5:6)
433	IF ( coupling_mode == 'uncoupled' ) THEN
434	coupling_string = ''
435	ELSEIF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
436	coupling_string = ' coupled (atmosphere)'
437	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
438	coupling_string = ' coupled (ocean)'
439	ENDIF
440
441	WRITE ( run_description_header, &
442	'(A,2X,A,2X,A,A,A,I2.2,A,2X,A,A,2X,A,1X,A)' ) &
443	TRIM( version ), TRIM( revision ), 'run: ', &
444	TRIM( run_identifier ), '.', runnr, TRIM( coupling_string ), &
445	'host: ', TRIM( host ), run_date, run_time
446
447	!
448	!-- Check the general loop optimization method
449	IF ( loop_optimization == 'default' ) THEN
450	IF ( host(1:3) == 'nec' ) THEN
451	loop_optimization = 'vector'
452	ELSE
453	loop_optimization = 'cache'
454	ENDIF
455	ENDIF
456	IF ( loop_optimization /= 'noopt' .AND. loop_optimization /= 'cache' &
457	.AND. loop_optimization /= 'vector' ) THEN
458	message_string = 'illegal value given for loop_optimization: "' // &
459	TRIM( loop_optimization ) // '"'
460	CALL message( 'check_parameters', 'PA0013', 1, 2, 0, 6, 0 )
461	ENDIF
462
463	!
464	!-- Check topography setting (check for illegal parameter combinations)
465	IF ( topography /= 'flat' ) THEN
466	action = ' '
467	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'ws-scheme') THEN
468	WRITE( action, '(A,A)' ) 'scalar_advec = ', scalar_advec
469	ENDIF
470	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme' ) &
471	THEN
472	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
473	ENDIF
474	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
475	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
476	ENDIF
477	IF ( psolver == 'sor' ) THEN
478	WRITE( action, '(A,A)' ) 'psolver = ', psolver
479	ENDIF
480	IF ( sloping_surface ) THEN
481	WRITE( action, '(A)' ) 'sloping surface = .TRUE.'
482	ENDIF
483	IF ( galilei_transformation ) THEN
484	WRITE( action, '(A)' ) 'galilei_transformation = .TRUE.'
485	ENDIF
486	IF ( cloud_physics ) THEN
487	WRITE( action, '(A)' ) 'cloud_physics = .TRUE.'
488	ENDIF
489	IF ( cloud_droplets ) THEN
490	WRITE( action, '(A)' ) 'cloud_droplets = .TRUE.'
491	ENDIF
492	IF ( .NOT. prandtl_layer ) THEN
493	WRITE( action, '(A)' ) 'prandtl_layer = .FALSE.'
494	ENDIF
495	IF ( action /= ' ' ) THEN
496	message_string = 'a non-flat topography does not allow ' // &
497	TRIM( action )
498	CALL message( 'check_parameters', 'PA0014', 1, 2, 0, 6, 0 )
499	ENDIF
500	!
501	!-- In case of non-flat topography, check whether the convention how to
502	!-- define the topography grid has been set correctly, or whether the default
503	!-- is applicable. If this is not possible, abort.
504	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
505	IF ( TRIM( topography ) /= 'single_building' .AND. &
506	TRIM( topography ) /= 'single_street_canyon' .AND. &
507	TRIM( topography ) /= 'read_from_file' ) THEN
508	!-- The default value is not applicable here, because it is only valid
509	!-- for the two standard cases 'single_building' and 'read_from_file'
510	!-- defined in init_grid.
511	WRITE( message_string, * ) &
512	'The value for "topography_grid_convention" ', &
513	'is not set. Its default value is & only valid for ', &
514	'"topography" = ''single_building'', ', &
515	'''single_street_canyon'' & or ''read_from_file''.', &
516	' & Choose ''cell_edge'' or ''cell_center''.'
517	CALL message( 'user_check_parameters', 'PA0239', 1, 2, 0, 6, 0 )
518	ELSE
519	!-- The default value is applicable here.
520	!-- Set convention according to topography.
521	IF ( TRIM( topography ) == 'single_building' .OR. &
522	TRIM( topography ) == 'single_street_canyon' ) THEN
523	topography_grid_convention = 'cell_edge'
524	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
525	topography_grid_convention = 'cell_center'
526	ENDIF
527	ENDIF
528	ELSEIF ( TRIM( topography_grid_convention ) /= 'cell_edge' .AND. &
529	TRIM( topography_grid_convention ) /= 'cell_center' ) THEN
530	WRITE( message_string, * ) &
531	'The value for "topography_grid_convention" is ', &
532	'not recognized. & Choose ''cell_edge'' or ''cell_center''.'
533	CALL message( 'user_check_parameters', 'PA0240', 1, 2, 0, 6, 0 )
534	ENDIF
535
536	ENDIF
537
538	!
539	!-- Check ocean setting
540	IF ( ocean ) THEN
541
542	action = ' '
543	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
544	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
545	ENDIF
546	IF ( momentum_advec == 'ups-scheme' ) THEN
547	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
548	ENDIF
549	IF ( action /= ' ' ) THEN
550	message_string = 'ocean = .T. does not allow ' // TRIM( action )
551	CALL message( 'check_parameters', 'PA0015', 1, 2, 0, 6, 0 )
552	ENDIF
553
554	ELSEIF ( TRIM( coupling_mode ) == 'uncoupled' .AND. &
555	TRIM( coupling_char ) == '_O' ) THEN
556
557	!
558	!-- Check whether an (uncoupled) atmospheric run has been declared as an
559	!-- ocean run (this setting is done via mrun-option -y)
560
561	message_string = 'ocean = .F. does not allow coupling_char = "' // &
562	TRIM( coupling_char ) // '" set by mrun-option "-y"'
563	CALL message( 'check_parameters', 'PA0317', 1, 2, 0, 6, 0 )
564
565	ENDIF
566
567	!
568	!-- Check whether there are any illegal values
569	!-- Pressure solver:
570	IF ( psolver /= 'poisfft' .AND. psolver /= 'poisfft_hybrid' .AND. &
571	psolver /= 'sor' .AND. psolver /= 'multigrid' ) THEN
572	message_string = 'unknown solver for perturbation pressure: psolver' // &
573	' = "' // TRIM( psolver ) // '"'
574	CALL message( 'check_parameters', 'PA0016', 1, 2, 0, 6, 0 )
575	ENDIF
576
577	#if defined( __parallel )
578	IF ( psolver == 'poisfft_hybrid' .AND. pdims(2) /= 1 ) THEN
579	message_string = 'psolver = "' // TRIM( psolver ) // '" only works ' // &
580	'for a 1d domain-decomposition along x & please do' // &
581	' not set npey/=1 in the parameter file'
582	CALL message( 'check_parameters', 'PA0017', 1, 2, 0, 6, 0 )
583	ENDIF
584	IF ( psolver == 'poisfft_hybrid' .AND. &
585	( nxra > nxr .OR. nyna > nyn .OR. nza > nz ) .OR. &
586	psolver == 'multigrid' .AND. &
587	( nxra > nxr .OR. nyna > nyn ) ) THEN
588	message_string = 'psolver = "' // TRIM( psolver ) // '" does not ' // &
589	'work for subdomains with unequal size & please ' // &
590	'set grid_matching = ''strict'' in the parameter file'
591	CALL message( 'check_parameters', 'PA0018', 1, 2, 0, 6, 0 )
592	ENDIF
593	#else
594	IF ( psolver == 'poisfft_hybrid' ) THEN
595	message_string = 'psolver = "' // TRIM( psolver ) // '" only works' // &
596	' for a parallel environment'
597	CALL message( 'check_parameters', 'PA0019', 1, 2, 0, 6, 0 )
598	ENDIF
599	#endif
600
601	IF ( psolver == 'multigrid' ) THEN
602	IF ( cycle_mg == 'w' ) THEN
603	gamma_mg = 2
604	ELSEIF ( cycle_mg == 'v' ) THEN
605	gamma_mg = 1
606	ELSE
607	message_string = 'unknown multigrid cycle: cycle_mg = "' // &
608	TRIM( cycle_mg ) // '"'
609	CALL message( 'check_parameters', 'PA0020', 1, 2, 0, 6, 0 )
610	ENDIF
611	ENDIF
612
613	IF ( fft_method /= 'singleton-algorithm' .AND. &
614	fft_method /= 'temperton-algorithm' .AND. &
615	fft_method /= 'system-specific' ) THEN
616	message_string = 'unknown fft-algorithm: fft_method = "' // &
617	TRIM( fft_method ) // '"'
618	CALL message( 'check_parameters', 'PA0021', 1, 2, 0, 6, 0 )
619	ENDIF
620
621	IF( momentum_advec == 'ws-scheme' .AND. &
622	.NOT. call_psolver_at_all_substeps ) THEN
623	message_string = 'psolver must be called at each RK3 substep when "'//&
624	TRIM(momentum_advec) // ' "is used for momentum_advec'
625	CALL message( 'check_parameters', 'PA0344', 1, 2, 0, 6, 0 )
626	END IF
627	!
628	!-- Advection schemes:
629	!
630	!-- Set the LOGICALS to enhance the performance.
631	IF ( momentum_advec == 'ws-scheme' ) ws_scheme_mom = .TRUE.
632	IF ( scalar_advec == 'ws-scheme' ) ws_scheme_sca = .TRUE.
633
634	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme' .AND. &
635	momentum_advec /= 'ups-scheme' ) THEN
636	message_string = 'unknown advection scheme: momentum_advec = "' // &
637	TRIM( momentum_advec ) // '"'
638	CALL message( 'check_parameters', 'PA0022', 1, 2, 0, 6, 0 )
639	ENDIF
640	IF ((( momentum_advec == 'ups-scheme' .OR. scalar_advec == 'ups-scheme' )&
641	.AND. timestep_scheme /= 'euler' ) .OR. (( momentum_advec == 'ws-scheme'&
642	.OR. scalar_advec == 'ws-scheme') .AND. (timestep_scheme == 'euler' .OR. &
643	timestep_scheme == 'leapfrog+euler' .OR. timestep_scheme == 'leapfrog' &
644	.OR. timestep_scheme == 'runge-kutta-2'))) THEN
645	message_string = 'momentum_advec or scalar_advec = "' &
646	// TRIM( momentum_advec ) // '" is not allowed with timestep_scheme = "' // &
647	TRIM( timestep_scheme ) // '"'
648	CALL message( 'check_parameters', 'PA0023', 1, 2, 0, 6, 0 )
649	ENDIF
650	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'ws-scheme' .AND. &
651	scalar_advec /= 'bc-scheme' .AND. scalar_advec /= 'ups-scheme' ) THEN
652	message_string = 'unknown advection scheme: scalar_advec = "' // &
653	TRIM( scalar_advec ) // '"'
654	CALL message( 'check_parameters', 'PA0024', 1, 2, 0, 6, 0 )
655	ENDIF
656
657	IF ( use_sgs_for_particles .AND. .NOT. use_upstream_for_tke ) THEN
658	use_upstream_for_tke = .TRUE.
659	message_string = 'use_upstream_for_tke set .TRUE. because ' // &
660	'use_sgs_for_particles = .TRUE.'
661	CALL message( 'check_parameters', 'PA0025', 0, 1, 0, 6, 0 )
662	ENDIF
663
664	IF ( use_upstream_for_tke .AND. timestep_scheme(1:8) == 'leapfrog' ) THEN
665	message_string = 'use_upstream_for_tke = .TRUE. not allowed with ' // &
666	'timestep_scheme = "' // TRIM( timestep_scheme ) // '"'
667	CALL message( 'check_parameters', 'PA0026', 1, 2, 0, 6, 0 )
668	ENDIF
669
670	IF ( use_sgs_for_particles .AND. curvature_solution_effects ) THEN
671	message_string = 'use_sgs_for_particles = .TRUE. not allowed with ' // &
672	'curvature_solution_effects = .TRUE.'
673	CALL message( 'check_parameters', 'PA0349', 1, 2, 0, 6, 0 )
674	ENDIF
675
676	!
677	!-- Timestep schemes:
678	SELECT CASE ( TRIM( timestep_scheme ) )
679
680	CASE ( 'euler' )
681	intermediate_timestep_count_max = 1
682	asselin_filter_factor = 0.0
683
684	CASE ( 'leapfrog', 'leapfrog+euler' )
685	intermediate_timestep_count_max = 1
686
687	CASE ( 'runge-kutta-2' )
688	intermediate_timestep_count_max = 2
689	asselin_filter_factor = 0.0
690
691	CASE ( 'runge-kutta-3' )
692	intermediate_timestep_count_max = 3
693	asselin_filter_factor = 0.0
694
695	CASE DEFAULT
696	message_string = 'unknown timestep scheme: timestep_scheme = "' // &
697	TRIM( timestep_scheme ) // '"'
698	CALL message( 'check_parameters', 'PA0027', 1, 2, 0, 6, 0 )
699
700	END SELECT
701
702	IF ( scalar_advec == 'ups-scheme' .AND. timestep_scheme(1:5) == 'runge' )&
703	THEN
704	message_string = 'scalar advection scheme "' // TRIM( scalar_advec ) // &
705	'" & does not work with timestep_scheme "' // &
706	TRIM( timestep_scheme ) // '"'
707	CALL message( 'check_parameters', 'PA0028', 1, 2, 0, 6, 0 )
708	ENDIF
709
710	IF ( (momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme') &
711	.AND. timestep_scheme(1:5) == 'runge' ) THEN
712	message_string = 'momentum advection scheme "' // &
713	TRIM( momentum_advec ) // '" & does not work with ' // &
714	'timestep_scheme "' // TRIM( timestep_scheme ) // '"'
715	CALL message( 'check_parameters', 'PA0029', 1, 2, 0, 6, 0 )
716	ENDIF
717
718	!
719	!-- Collision kernels:
720	SELECT CASE ( TRIM( collision_kernel ) )
721
722	CASE ( 'hall', 'hall_fast' )
723	hall_kernel = .TRUE.
724
725	CASE ( 'palm' )
726	palm_kernel = .TRUE.
727
728	CASE ( 'wang', 'wang_fast' )
729	wang_kernel = .TRUE.
730
731	CASE ( 'none' )
732
733
734	CASE DEFAULT
735	message_string = 'unknown collision kernel: collision_kernel = "' // &
736	TRIM( collision_kernel ) // '"'
737	CALL message( 'check_parameters', 'PA0350', 1, 2, 0, 6, 0 )
738
739	END SELECT
740	IF ( collision_kernel(6:9) == 'fast' ) use_kernel_tables = .TRUE.
741
742	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
743	TRIM( initializing_actions ) /= 'cyclic_fill' ) THEN
744	!
745	!-- No restart run: several initialising actions are possible
746	action = initializing_actions
747	DO WHILE ( TRIM( action ) /= '' )
748	position = INDEX( action, ' ' )
749	SELECT CASE ( action(1:position-1) )
750
751	CASE ( 'set_constant_profiles', 'set_1d-model_profiles', &
752	'by_user', 'initialize_vortex', 'initialize_ptanom' )
753	action = action(position+1:)
754
755	CASE DEFAULT
756	message_string = 'initializing_action = "' // &
757	TRIM( action ) // '" unkown or not allowed'
758	CALL message( 'check_parameters', 'PA0030', 1, 2, 0, 6, 0 )
759
760	END SELECT
761	ENDDO
762	ENDIF
763
764	IF ( TRIM( initializing_actions ) == 'initialize_vortex' .AND. &
765	conserve_volume_flow ) THEN
766	message_string = 'initializing_actions = "initialize_vortex"' // &
767	' ist not allowed with conserve_volume_flow = .T.'
768	CALL message( 'check_parameters', 'PA0343', 1, 2, 0, 6, 0 )
769	ENDIF
770
771
772	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
773	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
774	message_string = 'initializing_actions = "set_constant_profiles"' // &
775	' and "set_1d-model_profiles" are not allowed ' // &
776	'simultaneously'
777	CALL message( 'check_parameters', 'PA0031', 1, 2, 0, 6, 0 )
778	ENDIF
779
780	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
781	INDEX( initializing_actions, 'by_user' ) /= 0 ) THEN
782	message_string = 'initializing_actions = "set_constant_profiles"' // &
783	' and "by_user" are not allowed simultaneously'
784	CALL message( 'check_parameters', 'PA0032', 1, 2, 0, 6, 0 )
785	ENDIF
786
787	IF ( INDEX( initializing_actions, 'by_user' ) /= 0 .AND. &
788	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
789	message_string = 'initializing_actions = "by_user" and ' // &
790	'"set_1d-model_profiles" are not allowed simultaneously'
791	CALL message( 'check_parameters', 'PA0033', 1, 2, 0, 6, 0 )
792	ENDIF
793
794	IF ( cloud_physics .AND. .NOT. humidity ) THEN
795	WRITE( message_string, * ) 'cloud_physics = ', cloud_physics, ' is ', &
796	'not allowed with humidity = ', humidity
797	CALL message( 'check_parameters', 'PA0034', 1, 2, 0, 6, 0 )
798	ENDIF
799
800	IF ( precipitation .AND. .NOT. cloud_physics ) THEN
801	WRITE( message_string, * ) 'precipitation = ', precipitation, ' is ', &
802	'not allowed with cloud_physics = ', cloud_physics
803	CALL message( 'check_parameters', 'PA0035', 1, 2, 0, 6, 0 )
804	ENDIF
805
806	IF ( humidity .AND. sloping_surface ) THEN
807	message_string = 'humidity = .TRUE. and sloping_surface = .TRUE. ' // &
808	'are not allowed simultaneously'
809	CALL message( 'check_parameters', 'PA0036', 1, 2, 0, 6, 0 )
810	ENDIF
811
812	IF ( humidity .AND. scalar_advec == 'ups-scheme' ) THEN
813	message_string = 'UPS-scheme is not implemented for humidity = .TRUE.'
814	CALL message( 'check_parameters', 'PA0037', 1, 2, 0, 6, 0 )
815	ENDIF
816
817	IF ( passive_scalar .AND. humidity ) THEN
818	message_string = 'humidity = .TRUE. and passive_scalar = .TRUE. ' // &
819	'is not allowed simultaneously'
820	CALL message( 'check_parameters', 'PA0038', 1, 2, 0, 6, 0 )
821	ENDIF
822
823	IF ( passive_scalar .AND. scalar_advec == 'ups-scheme' ) THEN
824	message_string = 'UPS-scheme is not implemented for passive_scalar' // &
825	' = .TRUE.'
826	CALL message( 'check_parameters', 'PA0039', 1, 2, 0, 6, 0 )
827	ENDIF
828
829	IF ( grid_matching /= 'strict' .AND. grid_matching /= 'match' ) THEN
830	message_string = 'illegal value "' // TRIM( grid_matching ) // &
831	'" found for parameter grid_matching'
832	CALL message( 'check_parameters', 'PA0040', 1, 2, 0, 6, 0 )
833	ENDIF
834
835	IF ( plant_canopy .AND. ( drag_coefficient == 0.0 ) ) THEN
836	message_string = 'plant_canopy = .TRUE. requires a non-zero drag ' // &
837	'coefficient & given value is drag_coefficient = 0.0'
838	CALL message( 'check_parameters', 'PA0041', 1, 2, 0, 6, 0 )
839	ENDIF
840
841	!
842	!-- In case of no model continuation run, check initialising parameters and
843	!-- deduce further quantities
844	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
845
846	!
847	!-- Initial profiles for 1D and 3D model, respectively (u,v further below)
848	pt_init = pt_surface
849	IF ( humidity ) q_init = q_surface
850	IF ( ocean ) sa_init = sa_surface
851	IF ( passive_scalar ) q_init = s_surface
852	IF ( plant_canopy ) lad = 0.0
853
854	!
855	!--
856	!-- If required, compute initial profile of the geostrophic wind
857	!-- (component ug)
858	i = 1
859	gradient = 0.0
860
861	IF ( .NOT. ocean ) THEN
862
863	ug_vertical_gradient_level_ind(1) = 0
864	ug(0) = ug_surface
865	DO k = 1, nzt+1
866	IF ( i < 11 ) THEN
867	IF ( ug_vertical_gradient_level(i) < zu(k) .AND. &
868	ug_vertical_gradient_level(i) >= 0.0 ) THEN
869	gradient = ug_vertical_gradient(i) / 100.0
870	ug_vertical_gradient_level_ind(i) = k - 1
871	i = i + 1
872	ENDIF
873	ENDIF
874	IF ( gradient /= 0.0 ) THEN
875	IF ( k /= 1 ) THEN
876	ug(k) = ug(k-1) + dzu(k) * gradient
877	ELSE
878	ug(k) = ug_surface + 0.5 * dzu(k) * gradient
879	ENDIF
880	ELSE
881	ug(k) = ug(k-1)
882	ENDIF
883	ENDDO
884
885	ELSE
886
887	ug_vertical_gradient_level_ind(1) = nzt+1
888	ug(nzt+1) = ug_surface
889	DO k = nzt, nzb, -1
890	IF ( i < 11 ) THEN
891	IF ( ug_vertical_gradient_level(i) > zu(k) .AND. &
892	ug_vertical_gradient_level(i) <= 0.0 ) THEN
893	gradient = ug_vertical_gradient(i) / 100.0
894	ug_vertical_gradient_level_ind(i) = k + 1
895	i = i + 1
896	ENDIF
897	ENDIF
898	IF ( gradient /= 0.0 ) THEN
899	IF ( k /= nzt ) THEN
900	ug(k) = ug(k+1) - dzu(k+1) * gradient
901	ELSE
902	ug(k) = ug_surface - 0.5 * dzu(k+1) * gradient
903	ug(k+1) = ug_surface + 0.5 * dzu(k+1) * gradient
904	ENDIF
905	ELSE
906	ug(k) = ug(k+1)
907	ENDIF
908	ENDDO
909
910	ENDIF
911
912	!
913	!-- In case of no given gradients for ug, choose a zero gradient
914	IF ( ug_vertical_gradient_level(1) == -9999999.9 ) THEN
915	ug_vertical_gradient_level(1) = 0.0
916	ENDIF
917
918	!
919	!--
920	!-- If required, compute initial profile of the geostrophic wind
921	!-- (component vg)
922	i = 1
923	gradient = 0.0
924
925	IF ( .NOT. ocean ) THEN
926
927	vg_vertical_gradient_level_ind(1) = 0
928	vg(0) = vg_surface
929	DO k = 1, nzt+1
930	IF ( i < 11 ) THEN
931	IF ( vg_vertical_gradient_level(i) < zu(k) .AND. &
932	vg_vertical_gradient_level(i) >= 0.0 ) THEN
933	gradient = vg_vertical_gradient(i) / 100.0
934	vg_vertical_gradient_level_ind(i) = k - 1
935	i = i + 1
936	ENDIF
937	ENDIF
938	IF ( gradient /= 0.0 ) THEN
939	IF ( k /= 1 ) THEN
940	vg(k) = vg(k-1) + dzu(k) * gradient
941	ELSE
942	vg(k) = vg_surface + 0.5 * dzu(k) * gradient
943	ENDIF
944	ELSE
945	vg(k) = vg(k-1)
946	ENDIF
947	ENDDO
948
949	ELSE
950
951	vg_vertical_gradient_level_ind(1) = nzt+1
952	vg(nzt+1) = vg_surface
953	DO k = nzt, nzb, -1
954	IF ( i < 11 ) THEN
955	IF ( vg_vertical_gradient_level(i) > zu(k) .AND. &
956	vg_vertical_gradient_level(i) <= 0.0 ) THEN
957	gradient = vg_vertical_gradient(i) / 100.0
958	vg_vertical_gradient_level_ind(i) = k + 1
959	i = i + 1
960	ENDIF
961	ENDIF
962	IF ( gradient /= 0.0 ) THEN
963	IF ( k /= nzt ) THEN
964	vg(k) = vg(k+1) - dzu(k+1) * gradient
965	ELSE
966	vg(k) = vg_surface - 0.5 * dzu(k+1) * gradient
967	vg(k+1) = vg_surface + 0.5 * dzu(k+1) * gradient
968	ENDIF
969	ELSE
970	vg(k) = vg(k+1)
971	ENDIF
972	ENDDO
973
974	ENDIF
975
976	!
977	!-- In case of no given gradients for vg, choose a zero gradient
978	IF ( vg_vertical_gradient_level(1) == -9999999.9 ) THEN
979	vg_vertical_gradient_level(1) = 0.0
980	ENDIF
981
982	!
983	!-- Let the initial wind profiles be the calculated ug/vg profiles or
984	!-- interpolate them from wind profile data (if given)
985	IF ( u_profile(1) == 9999999.9 .AND. v_profile(1) == 9999999.9 ) THEN
986
987	u_init = ug
988	v_init = vg
989
990	ELSEIF ( u_profile(1) == 0.0 .AND. v_profile(1) == 0.0 ) THEN
991
992	IF ( uv_heights(1) /= 0.0 ) THEN
993	message_string = 'uv_heights(1) must be 0.0'
994	CALL message( 'check_parameters', 'PA0345', 1, 2, 0, 6, 0 )
995	ENDIF
996
997	use_prescribed_profile_data = .TRUE.
998
999	kk = 1
1000	u_init(0) = 0.0
1001	v_init(0) = 0.0
1002
1003	DO k = 1, nz+1
1004
1005	IF ( kk < 100 ) THEN
1006	DO WHILE ( uv_heights(kk+1) <= zu(k) )
1007	kk = kk + 1
1008	IF ( kk == 100 ) EXIT
1009	ENDDO
1010	ENDIF
1011
1012	IF ( kk < 100 .AND. uv_heights(kk+1) /= 9999999.9 ) THEN
1013	u_init(k) = u_profile(kk) + ( zu(k) - uv_heights(kk) ) / &
1014	( uv_heights(kk+1) - uv_heights(kk) ) * &
1015	( u_profile(kk+1) - u_profile(kk) )
1016	v_init(k) = v_profile(kk) + ( zu(k) - uv_heights(kk) ) / &
1017	( uv_heights(kk+1) - uv_heights(kk) ) * &
1018	( v_profile(kk+1) - v_profile(kk) )
1019	ELSE
1020	u_init(k) = u_profile(kk)
1021	v_init(k) = v_profile(kk)
1022	ENDIF
1023
1024	ENDDO
1025
1026	ELSE
1027
1028	message_string = 'u_profile(1) and v_profile(1) must be 0.0'
1029	CALL message( 'check_parameters', 'PA0346', 1, 2, 0, 6, 0 )
1030
1031	ENDIF
1032
1033	!
1034	!-- Compute initial temperature profile using the given temperature gradients
1035	i = 1
1036	gradient = 0.0
1037
1038	IF ( .NOT. ocean ) THEN
1039
1040	pt_vertical_gradient_level_ind(1) = 0
1041	DO k = 1, nzt+1
1042	IF ( i < 11 ) THEN
1043	IF ( pt_vertical_gradient_level(i) < zu(k) .AND. &
1044	pt_vertical_gradient_level(i) >= 0.0 ) THEN
1045	gradient = pt_vertical_gradient(i) / 100.0
1046	pt_vertical_gradient_level_ind(i) = k - 1
1047	i = i + 1
1048	ENDIF
1049	ENDIF
1050	IF ( gradient /= 0.0 ) THEN
1051	IF ( k /= 1 ) THEN
1052	pt_init(k) = pt_init(k-1) + dzu(k) * gradient
1053	ELSE
1054	pt_init(k) = pt_surface + 0.5 * dzu(k) * gradient
1055	ENDIF
1056	ELSE
1057	pt_init(k) = pt_init(k-1)
1058	ENDIF
1059	ENDDO
1060
1061	ELSE
1062
1063	pt_vertical_gradient_level_ind(1) = nzt+1
1064	DO k = nzt, 0, -1
1065	IF ( i < 11 ) THEN
1066	IF ( pt_vertical_gradient_level(i) > zu(k) .AND. &
1067	pt_vertical_gradient_level(i) <= 0.0 ) THEN
1068	gradient = pt_vertical_gradient(i) / 100.0
1069	pt_vertical_gradient_level_ind(i) = k + 1
1070	i = i + 1
1071	ENDIF
1072	ENDIF
1073	IF ( gradient /= 0.0 ) THEN
1074	IF ( k /= nzt ) THEN
1075	pt_init(k) = pt_init(k+1) - dzu(k+1) * gradient
1076	ELSE
1077	pt_init(k) = pt_surface - 0.5 * dzu(k+1) * gradient
1078	pt_init(k+1) = pt_surface + 0.5 * dzu(k+1) * gradient
1079	ENDIF
1080	ELSE
1081	pt_init(k) = pt_init(k+1)
1082	ENDIF
1083	ENDDO
1084
1085	ENDIF
1086
1087	!
1088	!-- In case of no given temperature gradients, choose gradient of neutral
1089	!-- stratification
1090	IF ( pt_vertical_gradient_level(1) == -9999999.9 ) THEN
1091	pt_vertical_gradient_level(1) = 0.0
1092	ENDIF
1093
1094	!
1095	!-- Store temperature gradient at the top boundary for possible Neumann
1096	!-- boundary condition
1097	bc_pt_t_val = ( pt_init(nzt+1) - pt_init(nzt) ) / dzu(nzt+1)
1098
1099	!
1100	!-- If required, compute initial humidity or scalar profile using the given
1101	!-- humidity/scalar gradient. In case of scalar transport, initially store
1102	!-- values of the scalar parameters on humidity parameters
1103	IF ( passive_scalar ) THEN
1104	bc_q_b = bc_s_b
1105	bc_q_t = bc_s_t
1106	q_surface = s_surface
1107	q_surface_initial_change = s_surface_initial_change
1108	q_vertical_gradient = s_vertical_gradient
1109	q_vertical_gradient_level = s_vertical_gradient_level
1110	surface_waterflux = surface_scalarflux
1111	wall_humidityflux = wall_scalarflux
1112	ENDIF
1113
1114	IF ( humidity .OR. passive_scalar ) THEN
1115
1116	i = 1
1117	gradient = 0.0
1118	q_vertical_gradient_level_ind(1) = 0
1119	DO k = 1, nzt+1
1120	IF ( i < 11 ) THEN
1121	IF ( q_vertical_gradient_level(i) < zu(k) .AND. &
1122	q_vertical_gradient_level(i) >= 0.0 ) THEN
1123	gradient = q_vertical_gradient(i) / 100.0
1124	q_vertical_gradient_level_ind(i) = k - 1
1125	i = i + 1
1126	ENDIF
1127	ENDIF
1128	IF ( gradient /= 0.0 ) THEN
1129	IF ( k /= 1 ) THEN
1130	q_init(k) = q_init(k-1) + dzu(k) * gradient
1131	ELSE
1132	q_init(k) = q_init(k-1) + 0.5 * dzu(k) * gradient
1133	ENDIF
1134	ELSE
1135	q_init(k) = q_init(k-1)
1136	ENDIF
1137	!
1138	!-- Avoid negative humidities
1139	IF ( q_init(k) < 0.0 ) THEN
1140	q_init(k) = 0.0
1141	ENDIF
1142	ENDDO
1143
1144	!
1145	!-- In case of no given humidity gradients, choose zero gradient
1146	!-- conditions
1147	IF ( q_vertical_gradient_level(1) == -1.0 ) THEN
1148	q_vertical_gradient_level(1) = 0.0
1149	ENDIF
1150
1151	!
1152	!-- Store humidity gradient at the top boundary for possile Neumann
1153	!-- boundary condition
1154	bc_q_t_val = ( q_init(nzt+1) - q_init(nzt) ) / dzu(nzt+1)
1155
1156	ENDIF
1157
1158	!
1159	!-- If required, compute initial salinity profile using the given salinity
1160	!-- gradients
1161	IF ( ocean ) THEN
1162
1163	i = 1
1164	gradient = 0.0
1165
1166	sa_vertical_gradient_level_ind(1) = nzt+1
1167	DO k = nzt, 0, -1
1168	IF ( i < 11 ) THEN
1169	IF ( sa_vertical_gradient_level(i) > zu(k) .AND. &
1170	sa_vertical_gradient_level(i) <= 0.0 ) THEN
1171	gradient = sa_vertical_gradient(i) / 100.0
1172	sa_vertical_gradient_level_ind(i) = k + 1
1173	i = i + 1
1174	ENDIF
1175	ENDIF
1176	IF ( gradient /= 0.0 ) THEN
1177	IF ( k /= nzt ) THEN
1178	sa_init(k) = sa_init(k+1) - dzu(k+1) * gradient
1179	ELSE
1180	sa_init(k) = sa_surface - 0.5 * dzu(k+1) * gradient
1181	sa_init(k+1) = sa_surface + 0.5 * dzu(k+1) * gradient
1182	ENDIF
1183	ELSE
1184	sa_init(k) = sa_init(k+1)
1185	ENDIF
1186	ENDDO
1187
1188	ENDIF
1189
1190	!
1191	!-- If required compute the profile of leaf area density used in the plant
1192	!-- canopy model
1193	IF ( plant_canopy ) THEN
1194
1195	i = 1
1196	gradient = 0.0
1197
1198	IF ( .NOT. ocean ) THEN
1199
1200	lad(0) = lad_surface
1201
1202	lad_vertical_gradient_level_ind(1) = 0
1203	DO k = 1, pch_index
1204	IF ( i < 11 ) THEN
1205	IF ( lad_vertical_gradient_level(i) < zu(k) .AND. &
1206	lad_vertical_gradient_level(i) >= 0.0 ) THEN
1207	gradient = lad_vertical_gradient(i)
1208	lad_vertical_gradient_level_ind(i) = k - 1
1209	i = i + 1
1210	ENDIF
1211	ENDIF
1212	IF ( gradient /= 0.0 ) THEN
1213	IF ( k /= 1 ) THEN
1214	lad(k) = lad(k-1) + dzu(k) * gradient
1215	ELSE
1216	lad(k) = lad_surface + 0.5 * dzu(k) *gradient
1217	ENDIF
1218	ELSE
1219	lad(k) = lad(k-1)
1220	ENDIF
1221	ENDDO
1222
1223	ENDIF
1224
1225	!
1226	!-- In case of no given leaf area density gradients, choose a vanishing
1227	!-- gradient
1228	IF ( lad_vertical_gradient_level(1) == -9999999.9 ) THEN
1229	lad_vertical_gradient_level(1) = 0.0
1230	ENDIF
1231
1232	ENDIF
1233
1234	ENDIF
1235
1236	!
1237	!-- Initialize large scale subsidence if required
1238	IF ( subs_vertical_gradient_level(1) /= -9999999.9 ) THEN
1239	large_scale_subsidence = .TRUE.
1240	CALL init_w_subsidence
1241	END IF
1242
1243
1244
1245	!
1246	!-- Compute Coriolis parameter
1247	f = 2.0 * omega * SIN( phi / 180.0 * pi )
1248	fs = 2.0 * omega * COS( phi / 180.0 * pi )
1249
1250	!
1251	!-- Ocean runs always use reference values in the buoyancy term. Therefore
1252	!-- set the reference temperature equal to the surface temperature.
1253	IF ( ocean .AND. pt_reference == 9999999.9 ) pt_reference = pt_surface
1254
1255	!
1256	!-- Reference value has to be used in buoyancy terms
1257	IF ( pt_reference /= 9999999.9 ) use_reference = .TRUE.
1258
1259	!
1260	!-- Sign of buoyancy/stability terms
1261	IF ( ocean ) atmos_ocean_sign = -1.0
1262
1263	!
1264	!-- Ocean version must use flux boundary conditions at the top
1265	IF ( ocean .AND. .NOT. use_top_fluxes ) THEN
1266	message_string = 'use_top_fluxes must be .TRUE. in ocean version'
1267	CALL message( 'check_parameters', 'PA0042', 1, 2, 0, 6, 0 )
1268	ENDIF
1269
1270	!
1271	!-- In case of a given slope, compute the relevant quantities
1272	IF ( alpha_surface /= 0.0 ) THEN
1273	IF ( ABS( alpha_surface ) > 90.0 ) THEN
1274	WRITE( message_string, * ) 'ABS( alpha_surface = ', alpha_surface, &
1275	' ) must be < 90.0'
1276	CALL message( 'check_parameters', 'PA0043', 1, 2, 0, 6, 0 )
1277	ENDIF
1278	sloping_surface = .TRUE.
1279	cos_alpha_surface = COS( alpha_surface / 180.0 * pi )
1280	sin_alpha_surface = SIN( alpha_surface / 180.0 * pi )
1281	ENDIF
1282
1283	!
1284	!-- Check time step and cfl_factor
1285	IF ( dt /= -1.0 ) THEN
1286	IF ( dt <= 0.0 .AND. dt /= -1.0 ) THEN
1287	WRITE( message_string, * ) 'dt = ', dt , ' <= 0.0'
1288	CALL message( 'check_parameters', 'PA0044', 1, 2, 0, 6, 0 )
1289	ENDIF
1290	dt_3d = dt
1291	dt_fixed = .TRUE.
1292	ENDIF
1293
1294	IF ( cfl_factor <= 0.0 .OR. cfl_factor > 1.0 ) THEN
1295	IF ( cfl_factor == -1.0 ) THEN
1296	IF ( momentum_advec == 'ups-scheme' .OR. &
1297	scalar_advec == 'ups-scheme' ) THEN
1298	cfl_factor = 0.8
1299	ELSE
1300	IF ( timestep_scheme == 'runge-kutta-2' ) THEN
1301	cfl_factor = 0.8
1302	ELSEIF ( timestep_scheme == 'runge-kutta-3' ) THEN
1303	cfl_factor = 0.9
1304	ELSE
1305	cfl_factor = 0.1
1306	ENDIF
1307	ENDIF
1308	ELSE
1309	WRITE( message_string, * ) 'cfl_factor = ', cfl_factor, &
1310	' out of range & 0.0 < cfl_factor <= 1.0 is required'
1311	CALL message( 'check_parameters', 'PA0045', 1, 2, 0, 6, 0 )
1312	ENDIF
1313	ENDIF
1314
1315	!
1316	!-- Store simulated time at begin
1317	simulated_time_at_begin = simulated_time
1318
1319	!
1320	!-- Store reference time for coupled runs and change the coupling flag,
1321	!-- if ...
1322	IF ( simulated_time == 0.0 ) THEN
1323	IF ( coupling_start_time == 0.0 ) THEN
1324	time_since_reference_point = 0.0
1325	ELSEIF ( time_since_reference_point < 0.0 ) THEN
1326	run_coupled = .FALSE.
1327	ENDIF
1328	ENDIF
1329
1330	!
1331	!-- Set wind speed in the Galilei-transformed system
1332	IF ( galilei_transformation ) THEN
1333	IF ( use_ug_for_galilei_tr .AND. &
1334	ug_vertical_gradient_level(1) == 0.0 .AND. &
1335	vg_vertical_gradient_level(1) == 0.0 ) THEN
1336	u_gtrans = ug_surface * 0.6
1337	v_gtrans = vg_surface * 0.6
1338	ELSEIF ( use_ug_for_galilei_tr .AND. &
1339	ug_vertical_gradient_level(1) /= 0.0 ) THEN
1340	message_string = 'baroclinicity (ug) not allowed simultaneously' // &
1341	' with galilei transformation'
1342	CALL message( 'check_parameters', 'PA0046', 1, 2, 0, 6, 0 )
1343	ELSEIF ( use_ug_for_galilei_tr .AND. &
1344	vg_vertical_gradient_level(1) /= 0.0 ) THEN
1345	message_string = 'baroclinicity (vg) not allowed simultaneously' // &
1346	' with galilei transformation'
1347	CALL message( 'check_parameters', 'PA0047', 1, 2, 0, 6, 0 )
1348	ELSE
1349	message_string = 'variable translation speed used for galilei-' // &
1350	'transformation, which may cause & instabilities in stably ' // &
1351	'stratified regions'
1352	CALL message( 'check_parameters', 'PA0048', 0, 1, 0, 6, 0 )
1353	ENDIF
1354	ENDIF
1355
1356	!
1357	!-- In case of using a prandtl-layer, calculated (or prescribed) surface
1358	!-- fluxes have to be used in the diffusion-terms
1359	IF ( prandtl_layer ) use_surface_fluxes = .TRUE.
1360
1361	!
1362	!-- Check boundary conditions and set internal variables:
1363	!-- Lateral boundary conditions
1364	IF ( bc_lr /= 'cyclic' .AND. bc_lr /= 'dirichlet/radiation' .AND. &
1365	bc_lr /= 'radiation/dirichlet' ) THEN
1366	message_string = 'unknown boundary condition: bc_lr = "' // &
1367	TRIM( bc_lr ) // '"'
1368	CALL message( 'check_parameters', 'PA0049', 1, 2, 0, 6, 0 )
1369	ENDIF
1370	IF ( bc_ns /= 'cyclic' .AND. bc_ns /= 'dirichlet/radiation' .AND. &
1371	bc_ns /= 'radiation/dirichlet' ) THEN
1372	message_string = 'unknown boundary condition: bc_ns = "' // &
1373	TRIM( bc_ns ) // '"'
1374	CALL message( 'check_parameters', 'PA0050', 1, 2, 0, 6, 0 )
1375	ENDIF
1376
1377	!
1378	!-- Internal variables used for speed optimization in if clauses
1379	IF ( bc_lr /= 'cyclic' ) bc_lr_cyc = .FALSE.
1380	IF ( bc_lr == 'dirichlet/radiation' ) bc_lr_dirrad = .TRUE.
1381	IF ( bc_lr == 'radiation/dirichlet' ) bc_lr_raddir = .TRUE.
1382	IF ( bc_ns /= 'cyclic' ) bc_ns_cyc = .FALSE.
1383	IF ( bc_ns == 'dirichlet/radiation' ) bc_ns_dirrad = .TRUE.
1384	IF ( bc_ns == 'radiation/dirichlet' ) bc_ns_raddir = .TRUE.
1385
1386	!
1387	!-- Non-cyclic lateral boundaries require the multigrid method and Piascek-
1388	!-- Willimas or Wicker - Skamarock advection scheme. Several schemes
1389	!-- and tools do not work with non-cyclic boundary conditions.
1390	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
1391	IF ( psolver /= 'multigrid' ) THEN
1392	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1393	'psolver = "' // TRIM( psolver ) // '"'
1394	CALL message( 'check_parameters', 'PA0051', 1, 2, 0, 6, 0 )
1395	ENDIF
1396	IF ( momentum_advec /= 'pw-scheme' .AND. &
1397	momentum_advec /= 'ws-scheme') THEN
1398	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1399	'momentum_advec = "' // TRIM( momentum_advec ) // '"'
1400	CALL message( 'check_parameters', 'PA0052', 1, 2, 0, 6, 0 )
1401	ENDIF
1402	IF ( scalar_advec /= 'pw-scheme' .AND. &
1403	scalar_advec /= 'ws-scheme' ) THEN
1404	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1405	'scalar_advec = "' // TRIM( scalar_advec ) // '"'
1406	CALL message( 'check_parameters', 'PA0053', 1, 2, 0, 6, 0 )
1407	ENDIF
1408	IF ( galilei_transformation ) THEN
1409	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1410	'galilei_transformation = .T.'
1411	CALL message( 'check_parameters', 'PA0054', 1, 2, 0, 6, 0 )
1412	ENDIF
1413	ENDIF
1414
1415	!
1416	!-- Bottom boundary condition for the turbulent Kinetic energy
1417	IF ( bc_e_b == 'neumann' ) THEN
1418	ibc_e_b = 1
1419	IF ( adjust_mixing_length .AND. prandtl_layer ) THEN
1420	message_string = 'adjust_mixing_length = TRUE and bc_e_b = "neumann"'
1421	CALL message( 'check_parameters', 'PA0055', 0, 1, 0, 6, 0 )
1422	ENDIF
1423	ELSEIF ( bc_e_b == '(u)*2+neumann' ) THEN
1424	ibc_e_b = 2
1425	IF ( .NOT. adjust_mixing_length .AND. prandtl_layer ) THEN
1426	message_string = 'adjust_mixing_length = FALSE and bc_e_b = "' // &
1427	TRIM( bc_e_b ) // '"'
1428	CALL message( 'check_parameters', 'PA0056', 0, 1, 0, 6, 0 )
1429	ENDIF
1430	IF ( .NOT. prandtl_layer ) THEN
1431	bc_e_b = 'neumann'
1432	ibc_e_b = 1
1433	message_string = 'boundary condition bc_e_b changed to "' // &
1434	TRIM( bc_e_b ) // '"'
1435	CALL message( 'check_parameters', 'PA0057', 0, 1, 0, 6, 0 )
1436	ENDIF
1437	ELSE
1438	message_string = 'unknown boundary condition: bc_e_b = "' // &
1439	TRIM( bc_e_b ) // '"'
1440	CALL message( 'check_parameters', 'PA0058', 1, 2, 0, 6, 0 )
1441	ENDIF
1442
1443	!
1444	!-- Boundary conditions for perturbation pressure
1445	IF ( bc_p_b == 'dirichlet' ) THEN
1446	ibc_p_b = 0
1447	ELSEIF ( bc_p_b == 'neumann' ) THEN
1448	ibc_p_b = 1
1449	ELSEIF ( bc_p_b == 'neumann+inhomo' ) THEN
1450	ibc_p_b = 2
1451	ELSE
1452	message_string = 'unknown boundary condition: bc_p_b = "' // &
1453	TRIM( bc_p_b ) // '"'
1454	CALL message( 'check_parameters', 'PA0059', 1, 2, 0, 6, 0 )
1455	ENDIF
1456	IF ( ibc_p_b == 2 .AND. .NOT. prandtl_layer ) THEN
1457	message_string = 'boundary condition: bc_p_b = "' // TRIM( bc_p_b ) // &
1458	'" not allowed with prandtl_layer = .FALSE.'
1459	CALL message( 'check_parameters', 'PA0060', 1, 2, 0, 6, 0 )
1460	ENDIF
1461	IF ( bc_p_t == 'dirichlet' ) THEN
1462	ibc_p_t = 0
1463	ELSEIF ( bc_p_t == 'neumann' ) THEN
1464	ibc_p_t = 1
1465	ELSE
1466	message_string = 'unknown boundary condition: bc_p_t = "' // &
1467	TRIM( bc_p_t ) // '"'
1468	CALL message( 'check_parameters', 'PA0061', 1, 2, 0, 6, 0 )
1469	ENDIF
1470
1471	!
1472	!-- Boundary conditions for potential temperature
1473	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
1474	ibc_pt_b = 2
1475	ELSE
1476	IF ( bc_pt_b == 'dirichlet' ) THEN
1477	ibc_pt_b = 0
1478	ELSEIF ( bc_pt_b == 'neumann' ) THEN
1479	ibc_pt_b = 1
1480	ELSE
1481	message_string = 'unknown boundary condition: bc_pt_b = "' // &
1482	TRIM( bc_pt_b ) // '"'
1483	CALL message( 'check_parameters', 'PA0062', 1, 2, 0, 6, 0 )
1484	ENDIF
1485	ENDIF
1486
1487	IF ( bc_pt_t == 'dirichlet' ) THEN
1488	ibc_pt_t = 0
1489	ELSEIF ( bc_pt_t == 'neumann' ) THEN
1490	ibc_pt_t = 1
1491	ELSEIF ( bc_pt_t == 'initial_gradient' ) THEN
1492	ibc_pt_t = 2
1493	ELSE
1494	message_string = 'unknown boundary condition: bc_pt_t = "' // &
1495	TRIM( bc_pt_t ) // '"'
1496	CALL message( 'check_parameters', 'PA0063', 1, 2, 0, 6, 0 )
1497	ENDIF
1498
1499	IF ( surface_heatflux == 9999999.9 ) constant_heatflux = .FALSE.
1500	IF ( top_heatflux == 9999999.9 ) constant_top_heatflux = .FALSE.
1501	IF ( top_momentumflux_u /= 9999999.9 .AND. &
1502	top_momentumflux_v /= 9999999.9 ) THEN
1503	constant_top_momentumflux = .TRUE.
1504	ELSEIF ( .NOT. ( top_momentumflux_u == 9999999.9 .AND. &
1505	top_momentumflux_v == 9999999.9 ) ) THEN
1506	message_string = 'both, top_momentumflux_u AND top_momentumflux_v ' // &
1507	'must be set'
1508	CALL message( 'check_parameters', 'PA0064', 1, 2, 0, 6, 0 )
1509	ENDIF
1510
1511	!
1512	!-- A given surface temperature implies Dirichlet boundary condition for
1513	!-- temperature. In this case specification of a constant heat flux is
1514	!-- forbidden.
1515	IF ( ibc_pt_b == 0 .AND. constant_heatflux .AND. &
1516	surface_heatflux /= 0.0 ) THEN
1517	message_string = 'boundary_condition: bc_pt_b = "' // TRIM( bc_pt_b ) //&
1518	'& is not allowed with constant_heatflux = .TRUE.'
1519	CALL message( 'check_parameters', 'PA0065', 1, 2, 0, 6, 0 )
1520	ENDIF
1521	IF ( constant_heatflux .AND. pt_surface_initial_change /= 0.0 ) THEN
1522	WRITE ( message_string, * ) 'constant_heatflux = .TRUE. is not allo', &
1523	'wed with pt_surface_initial_change (/=0) = ', &
1524	pt_surface_initial_change
1525	CALL message( 'check_parameters', 'PA0066', 1, 2, 0, 6, 0 )
1526	ENDIF
1527
1528	!
1529	!-- A given temperature at the top implies Dirichlet boundary condition for
1530	!-- temperature. In this case specification of a constant heat flux is
1531	!-- forbidden.
1532	IF ( ibc_pt_t == 0 .AND. constant_top_heatflux .AND. &
1533	top_heatflux /= 0.0 ) THEN
1534	message_string = 'boundary_condition: bc_pt_t = "' // TRIM( bc_pt_t ) //&
1535	'" is not allowed with constant_top_heatflux = .TRUE.'
1536	CALL message( 'check_parameters', 'PA0067', 1, 2, 0, 6, 0 )
1537	ENDIF
1538
1539	!
1540	!-- Boundary conditions for salinity
1541	IF ( ocean ) THEN
1542	IF ( bc_sa_t == 'dirichlet' ) THEN
1543	ibc_sa_t = 0
1544	ELSEIF ( bc_sa_t == 'neumann' ) THEN
1545	ibc_sa_t = 1
1546	ELSE
1547	message_string = 'unknown boundary condition: bc_sa_t = "' // &
1548	TRIM( bc_sa_t ) // '"'
1549	CALL message( 'check_parameters', 'PA0068', 1, 2, 0, 6, 0 )
1550	ENDIF
1551
1552	IF ( top_salinityflux == 9999999.9 ) constant_top_salinityflux = .FALSE.
1553	IF ( ibc_sa_t == 1 .AND. top_salinityflux == 9999999.9 ) THEN
1554	message_string = 'boundary condition: bc_sa_t = "' // &
1555	TRIM( bc_sa_t ) // '" requires to set ' // &
1556	'top_salinityflux'
1557	CALL message( 'check_parameters', 'PA0069', 1, 2, 0, 6, 0 )
1558	ENDIF
1559
1560	!
1561	!-- A fixed salinity at the top implies Dirichlet boundary condition for
1562	!-- salinity. In this case specification of a constant salinity flux is
1563	!-- forbidden.
1564	IF ( ibc_sa_t == 0 .AND. constant_top_salinityflux .AND. &
1565	top_salinityflux /= 0.0 ) THEN
1566	message_string = 'boundary condition: bc_sa_t = "' // &
1567	TRIM( bc_sa_t ) // '" is not allowed with ' // &
1568	'constant_top_salinityflux = .TRUE.'
1569	CALL message( 'check_parameters', 'PA0070', 1, 2, 0, 6, 0 )
1570	ENDIF
1571
1572	ENDIF
1573
1574	!
1575	!-- In case of humidity or passive scalar, set boundary conditions for total
1576	!-- water content / scalar
1577	IF ( humidity .OR. passive_scalar ) THEN
1578	IF ( humidity ) THEN
1579	sq = 'q'
1580	ELSE
1581	sq = 's'
1582	ENDIF
1583	IF ( bc_q_b == 'dirichlet' ) THEN
1584	ibc_q_b = 0
1585	ELSEIF ( bc_q_b == 'neumann' ) THEN
1586	ibc_q_b = 1
1587	ELSE
1588	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
1589	'_b ="' // TRIM( bc_q_b ) // '"'
1590	CALL message( 'check_parameters', 'PA0071', 1, 2, 0, 6, 0 )
1591	ENDIF
1592	IF ( bc_q_t == 'dirichlet' ) THEN
1593	ibc_q_t = 0
1594	ELSEIF ( bc_q_t == 'neumann' ) THEN
1595	ibc_q_t = 1
1596	ELSE
1597	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
1598	'_t ="' // TRIM( bc_q_t ) // '"'
1599	CALL message( 'check_parameters', 'PA0072', 1, 2, 0, 6, 0 )
1600	ENDIF
1601
1602	IF ( surface_waterflux == 9999999.9 ) constant_waterflux = .FALSE.
1603
1604	!
1605	!-- A given surface humidity implies Dirichlet boundary condition for
1606	!-- humidity. In this case specification of a constant water flux is
1607	!-- forbidden.
1608	IF ( ibc_q_b == 0 .AND. constant_waterflux ) THEN
1609	message_string = 'boundary condition: bc_' // TRIM( sq ) // '_b ' // &
1610	'= "' // TRIM( bc_q_b ) // '" is not allowed wi' // &
1611	'th prescribed surface flux'
1612	CALL message( 'check_parameters', 'PA0073', 1, 2, 0, 6, 0 )
1613	ENDIF
1614	IF ( constant_waterflux .AND. q_surface_initial_change /= 0.0 ) THEN
1615	WRITE( message_string, * ) 'a prescribed surface flux is not allo', &
1616	'wed with ', sq, '_surface_initial_change (/=0) = ', &
1617	q_surface_initial_change
1618	CALL message( 'check_parameters', 'PA0074', 1, 2, 0, 6, 0 )
1619	ENDIF
1620
1621	ENDIF
1622
1623	!
1624	!-- Boundary conditions for horizontal components of wind speed
1625	IF ( bc_uv_b == 'dirichlet' ) THEN
1626	ibc_uv_b = 0
1627	ELSEIF ( bc_uv_b == 'neumann' ) THEN
1628	ibc_uv_b = 1
1629	IF ( prandtl_layer ) THEN
1630	message_string = 'boundary condition: bc_uv_b = "' // &
1631	TRIM( bc_uv_b ) // '" is not allowed with prandtl_layer = .TRUE.'
1632	CALL message( 'check_parameters', 'PA0075', 1, 2, 0, 6, 0 )
1633	ENDIF
1634	ELSE
1635	message_string = 'unknown boundary condition: bc_uv_b = "' // &
1636	TRIM( bc_uv_b ) // '"'
1637	CALL message( 'check_parameters', 'PA0076', 1, 2, 0, 6, 0 )
1638	ENDIF
1639	!
1640	!-- In case of coupled simulations u and v at the ground in atmosphere will be
1641	!-- assigned with the u and v values of the ocean surface
1642	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
1643	ibc_uv_b = 2
1644	ENDIF
1645
1646	IF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
1647	bc_uv_t = 'neumann'
1648	ibc_uv_t = 1
1649	ELSE
1650	IF ( bc_uv_t == 'dirichlet' .OR. bc_uv_t == 'dirichlet_0' ) THEN
1651	ibc_uv_t = 0
1652	IF ( bc_uv_t == 'dirichlet_0' ) THEN
1653	!
1654	!-- Velocities for the initial u,v-profiles are set zero at the top
1655	!-- in case of dirichlet_0 conditions
1656	u_init(nzt+1) = 0.0
1657	v_init(nzt+1) = 0.0
1658	ENDIF
1659	ELSEIF ( bc_uv_t == 'neumann' ) THEN
1660	ibc_uv_t = 1
1661	ELSE
1662	message_string = 'unknown boundary condition: bc_uv_t = "' // &
1663	TRIM( bc_uv_t ) // '"'
1664	CALL message( 'check_parameters', 'PA0077', 1, 2, 0, 6, 0 )
1665	ENDIF
1666	ENDIF
1667
1668	!
1669	!-- Compute and check, respectively, the Rayleigh Damping parameter
1670	IF ( rayleigh_damping_factor == -1.0 ) THEN
1671	IF ( momentum_advec == 'ups-scheme' ) THEN
1672	rayleigh_damping_factor = 0.01
1673	ELSE
1674	rayleigh_damping_factor = 0.0
1675	ENDIF
1676	ELSE
1677	IF ( rayleigh_damping_factor < 0.0 .OR. rayleigh_damping_factor > 1.0 ) &
1678	THEN
1679	WRITE( message_string, * ) 'rayleigh_damping_factor = ', &
1680	rayleigh_damping_factor, ' out of range [0.0,1.0]'
1681	CALL message( 'check_parameters', 'PA0078', 1, 2, 0, 6, 0 )
1682	ENDIF
1683	ENDIF
1684
1685	IF ( rayleigh_damping_height == -1.0 ) THEN
1686	IF ( .NOT. ocean ) THEN
1687	rayleigh_damping_height = 0.66666666666 * zu(nzt)
1688	ELSE
1689	rayleigh_damping_height = 0.66666666666 * zu(nzb)
1690	ENDIF
1691	ELSE
1692	IF ( .NOT. ocean ) THEN
1693	IF ( rayleigh_damping_height < 0.0 .OR. &
1694	rayleigh_damping_height > zu(nzt) ) THEN
1695	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
1696	rayleigh_damping_height, ' out of range [0.0,', zu(nzt), ']'
1697	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
1698	ENDIF
1699	ELSE
1700	IF ( rayleigh_damping_height > 0.0 .OR. &
1701	rayleigh_damping_height < zu(nzb) ) THEN
1702	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
1703	rayleigh_damping_height, ' out of range [0.0,', zu(nzb), ']'
1704	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
1705	ENDIF
1706	ENDIF
1707	ENDIF
1708
1709	!
1710	!-- Check limiters for Upstream-Spline scheme
1711	IF ( overshoot_limit_u < 0.0 .OR. overshoot_limit_v < 0.0 .OR. &
1712	overshoot_limit_w < 0.0 .OR. overshoot_limit_pt < 0.0 .OR. &
1713	overshoot_limit_e < 0.0 ) THEN
1714	message_string = 'overshoot_limit_... < 0.0 is not allowed'
1715	CALL message( 'check_parameters', 'PA0080', 1, 2, 0, 6, 0 )
1716	ENDIF
1717	IF ( ups_limit_u < 0.0 .OR. ups_limit_v < 0.0 .OR. ups_limit_w < 0.0 .OR. &
1718	ups_limit_pt < 0.0 .OR. ups_limit_e < 0.0 ) THEN
1719	message_string = 'ups_limit_... < 0.0 is not allowed'
1720	CALL message( 'check_parameters', 'PA0081', 1, 2, 0, 6, 0 )
1721	ENDIF
1722
1723	!
1724	!-- Check number of chosen statistic regions. More than 10 regions are not
1725	!-- allowed, because so far no more than 10 corresponding output files can
1726	!-- be opened (cf. check_open)
1727	IF ( statistic_regions > 9 .OR. statistic_regions < 0 ) THEN
1728	WRITE ( message_string, * ) 'number of statistic_regions = ', &
1729	statistic_regions+1, ' but only 10 regions are allowed'
1730	CALL message( 'check_parameters', 'PA0082', 1, 2, 0, 6, 0 )
1731	ENDIF
1732	IF ( normalizing_region > statistic_regions .OR. &
1733	normalizing_region < 0) THEN
1734	WRITE ( message_string, * ) 'normalizing_region = ', &
1735	normalizing_region, ' must be >= 0 and <= ',statistic_regions, &
1736	' (value of statistic_regions)'
1737	CALL message( 'check_parameters', 'PA0083', 1, 2, 0, 6, 0 )
1738	ENDIF
1739
1740	!
1741	!-- Check the interval for sorting particles.
1742	!-- Using particles as cloud droplets requires sorting after each timestep.
1743	IF ( dt_sort_particles /= 0.0 .AND. cloud_droplets ) THEN
1744	dt_sort_particles = 0.0
1745	message_string = 'dt_sort_particles is reset to 0.0 because of cloud' //&
1746	'_droplets = .TRUE.'
1747	CALL message( 'check_parameters', 'PA0084', 0, 1, 0, 6, 0 )
1748	ENDIF
1749
1750	!
1751	!-- Set the default intervals for data output, if necessary
1752	!-- NOTE: dt_dosp has already been set in package_parin
1753	IF ( dt_data_output /= 9999999.9 ) THEN
1754	IF ( dt_dopr == 9999999.9 ) dt_dopr = dt_data_output
1755	IF ( dt_dopts == 9999999.9 ) dt_dopts = dt_data_output
1756	IF ( dt_do2d_xy == 9999999.9 ) dt_do2d_xy = dt_data_output
1757	IF ( dt_do2d_xz == 9999999.9 ) dt_do2d_xz = dt_data_output
1758	IF ( dt_do2d_yz == 9999999.9 ) dt_do2d_yz = dt_data_output
1759	IF ( dt_do3d == 9999999.9 ) dt_do3d = dt_data_output
1760	IF ( dt_data_output_av == 9999999.9 ) dt_data_output_av = dt_data_output
1761	DO mid = 1, max_masks
1762	IF ( dt_domask(mid) == 9999999.9 ) dt_domask(mid) = dt_data_output
1763	ENDDO
1764	ENDIF
1765
1766	!
1767	!-- Set the default skip time intervals for data output, if necessary
1768	IF ( skip_time_dopr == 9999999.9 ) &
1769	skip_time_dopr = skip_time_data_output
1770	IF ( skip_time_dosp == 9999999.9 ) &
1771	skip_time_dosp = skip_time_data_output
1772	IF ( skip_time_do2d_xy == 9999999.9 ) &
1773	skip_time_do2d_xy = skip_time_data_output
1774	IF ( skip_time_do2d_xz == 9999999.9 ) &
1775	skip_time_do2d_xz = skip_time_data_output
1776	IF ( skip_time_do2d_yz == 9999999.9 ) &
1777	skip_time_do2d_yz = skip_time_data_output
1778	IF ( skip_time_do3d == 9999999.9 ) &
1779	skip_time_do3d = skip_time_data_output
1780	IF ( skip_time_data_output_av == 9999999.9 ) &
1781	skip_time_data_output_av = skip_time_data_output
1782	DO mid = 1, max_masks
1783	IF ( skip_time_domask(mid) == 9999999.9 ) &
1784	skip_time_domask(mid) = skip_time_data_output
1785	ENDDO
1786
1787	!
1788	!-- Check the average intervals (first for 3d-data, then for profiles and
1789	!-- spectra)
1790	IF ( averaging_interval > dt_data_output_av ) THEN
1791	WRITE( message_string, * ) 'averaging_interval = ', &
1792	averaging_interval, ' must be <= dt_data_output = ', dt_data_output
1793	CALL message( 'check_parameters', 'PA0085', 1, 2, 0, 6, 0 )
1794	ENDIF
1795
1796	IF ( averaging_interval_pr == 9999999.9 ) THEN
1797	averaging_interval_pr = averaging_interval
1798	ENDIF
1799
1800	IF ( averaging_interval_pr > dt_dopr ) THEN
1801	WRITE( message_string, * ) 'averaging_interval_pr = ', &
1802	averaging_interval_pr, ' must be <= dt_dopr = ', dt_dopr
1803	CALL message( 'check_parameters', 'PA0086', 1, 2, 0, 6, 0 )
1804	ENDIF
1805
1806	IF ( averaging_interval_sp == 9999999.9 ) THEN
1807	averaging_interval_sp = averaging_interval
1808	ENDIF
1809
1810	IF ( averaging_interval_sp > dt_dosp ) THEN
1811	WRITE( message_string, * ) 'averaging_interval_sp = ', &
1812	averaging_interval_sp, ' must be <= dt_dosp = ', dt_dosp
1813	CALL message( 'check_parameters', 'PA0087', 1, 2, 0, 6, 0 )
1814	ENDIF
1815
1816	!
1817	!-- Set the default interval for profiles entering the temporal average
1818	IF ( dt_averaging_input_pr == 9999999.9 ) THEN
1819	dt_averaging_input_pr = dt_averaging_input
1820	ENDIF
1821
1822	!
1823	!-- Set the default interval for the output of timeseries to a reasonable
1824	!-- value (tries to minimize the number of calls of flow_statistics)
1825	IF ( dt_dots == 9999999.9 ) THEN
1826	IF ( averaging_interval_pr == 0.0 ) THEN
1827	dt_dots = MIN( dt_run_control, dt_dopr )
1828	ELSE
1829	dt_dots = MIN( dt_run_control, dt_averaging_input_pr )
1830	ENDIF
1831	ENDIF
1832
1833	!
1834	!-- Check the sample rate for averaging (first for 3d-data, then for profiles)
1835	IF ( dt_averaging_input > averaging_interval ) THEN
1836	WRITE( message_string, * ) 'dt_averaging_input = ', &
1837	dt_averaging_input, ' must be <= averaging_interval = ', &
1838	averaging_interval
1839	CALL message( 'check_parameters', 'PA0088', 1, 2, 0, 6, 0 )
1840	ENDIF
1841
1842	IF ( dt_averaging_input_pr > averaging_interval_pr ) THEN
1843	WRITE( message_string, * ) 'dt_averaging_input_pr = ', &
1844	dt_averaging_input_pr, ' must be <= averaging_interval_pr = ', &
1845	averaging_interval_pr
1846	CALL message( 'check_parameters', 'PA0089', 1, 2, 0, 6, 0 )
1847	ENDIF
1848
1849	!
1850	!-- Set the default value for the integration interval of precipitation amount
1851	IF ( precipitation ) THEN
1852	IF ( precipitation_amount_interval == 9999999.9 ) THEN
1853	precipitation_amount_interval = dt_do2d_xy
1854	ELSE
1855	IF ( precipitation_amount_interval > dt_do2d_xy ) THEN
1856	WRITE( message_string, * ) 'precipitation_amount_interval = ', &
1857	precipitation_amount_interval, ' must not be larger than ', &
1858	'dt_do2d_xy = ', dt_do2d_xy
1859	CALL message( 'check_parameters', 'PA0090', 1, 2, 0, 6, 0 )
1860	ENDIF
1861	ENDIF
1862	ENDIF
1863
1864	!
1865	!-- Determine the number of output profiles and check whether they are
1866	!-- permissible
1867	DO WHILE ( data_output_pr(dopr_n+1) /= ' ' )
1868
1869	dopr_n = dopr_n + 1
1870	i = dopr_n
1871
1872	!
1873	!-- Determine internal profile number (for hom, homs)
1874	!-- and store height levels
1875	SELECT CASE ( TRIM( data_output_pr(i) ) )
1876
1877	CASE ( 'u', '#u' )
1878	dopr_index(i) = 1
1879	dopr_unit(i) = 'm/s'
1880	hom(:,2,1,:) = SPREAD( zu, 2, statistic_regions+1 )
1881	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1882	dopr_initial_index(i) = 5
1883	hom(:,2,5,:) = SPREAD( zu, 2, statistic_regions+1 )
1884	data_output_pr(i) = data_output_pr(i)(2:)
1885	ENDIF
1886
1887	CASE ( 'v', '#v' )
1888	dopr_index(i) = 2
1889	dopr_unit(i) = 'm/s'
1890	hom(:,2,2,:) = SPREAD( zu, 2, statistic_regions+1 )
1891	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1892	dopr_initial_index(i) = 6
1893	hom(:,2,6,:) = SPREAD( zu, 2, statistic_regions+1 )
1894	data_output_pr(i) = data_output_pr(i)(2:)
1895	ENDIF
1896
1897	CASE ( 'w' )
1898	dopr_index(i) = 3
1899	dopr_unit(i) = 'm/s'
1900	hom(:,2,3,:) = SPREAD( zw, 2, statistic_regions+1 )
1901
1902	CASE ( 'pt', '#pt' )
1903	IF ( .NOT. cloud_physics ) THEN
1904	dopr_index(i) = 4
1905	dopr_unit(i) = 'K'
1906	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
1907	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1908	dopr_initial_index(i) = 7
1909	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
1910	hom(nzb,2,7,:) = 0.0 ! because zu(nzb) is negative
1911	data_output_pr(i) = data_output_pr(i)(2:)
1912	ENDIF
1913	ELSE
1914	dopr_index(i) = 43
1915	dopr_unit(i) = 'K'
1916	hom(:,2,43,:) = SPREAD( zu, 2, statistic_regions+1 )
1917	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1918	dopr_initial_index(i) = 28
1919	hom(:,2,28,:) = SPREAD( zu, 2, statistic_regions+1 )
1920	hom(nzb,2,28,:) = 0.0 ! because zu(nzb) is negative
1921	data_output_pr(i) = data_output_pr(i)(2:)
1922	ENDIF
1923	ENDIF
1924
1925	CASE ( 'e' )
1926	dopr_index(i) = 8
1927	dopr_unit(i) = 'm2/s2'
1928	hom(:,2,8,:) = SPREAD( zu, 2, statistic_regions+1 )
1929	hom(nzb,2,8,:) = 0.0
1930
1931	CASE ( 'km', '#km' )
1932	dopr_index(i) = 9
1933	dopr_unit(i) = 'm2/s'
1934	hom(:,2,9,:) = SPREAD( zu, 2, statistic_regions+1 )
1935	hom(nzb,2,9,:) = 0.0
1936	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1937	dopr_initial_index(i) = 23
1938	hom(:,2,23,:) = hom(:,2,9,:)
1939	data_output_pr(i) = data_output_pr(i)(2:)
1940	ENDIF
1941
1942	CASE ( 'kh', '#kh' )
1943	dopr_index(i) = 10
1944	dopr_unit(i) = 'm2/s'
1945	hom(:,2,10,:) = SPREAD( zu, 2, statistic_regions+1 )
1946	hom(nzb,2,10,:) = 0.0
1947	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1948	dopr_initial_index(i) = 24
1949	hom(:,2,24,:) = hom(:,2,10,:)
1950	data_output_pr(i) = data_output_pr(i)(2:)
1951	ENDIF
1952
1953	CASE ( 'l', '#l' )
1954	dopr_index(i) = 11
1955	dopr_unit(i) = 'm'
1956	hom(:,2,11,:) = SPREAD( zu, 2, statistic_regions+1 )
1957	hom(nzb,2,11,:) = 0.0
1958	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1959	dopr_initial_index(i) = 25
1960	hom(:,2,25,:) = hom(:,2,11,:)
1961	data_output_pr(i) = data_output_pr(i)(2:)
1962	ENDIF
1963
1964	CASE ( 'w"u"' )
1965	dopr_index(i) = 12
1966	dopr_unit(i) = 'm2/s2'
1967	hom(:,2,12,:) = SPREAD( zw, 2, statistic_regions+1 )
1968	IF ( prandtl_layer ) hom(nzb,2,12,:) = zu(1)
1969
1970	CASE ( 'wu' )
1971	dopr_index(i) = 13
1972	dopr_unit(i) = 'm2/s2'
1973	hom(:,2,13,:) = SPREAD( zw, 2, statistic_regions+1 )
1974
1975	CASE ( 'w"v"' )
1976	dopr_index(i) = 14
1977	dopr_unit(i) = 'm2/s2'
1978	hom(:,2,14,:) = SPREAD( zw, 2, statistic_regions+1 )
1979	IF ( prandtl_layer ) hom(nzb,2,14,:) = zu(1)
1980
1981	CASE ( 'wv' )
1982	dopr_index(i) = 15
1983	dopr_unit(i) = 'm2/s2'
1984	hom(:,2,15,:) = SPREAD( zw, 2, statistic_regions+1 )
1985
1986	CASE ( 'w"pt"' )
1987	dopr_index(i) = 16
1988	dopr_unit(i) = 'K m/s'
1989	hom(:,2,16,:) = SPREAD( zw, 2, statistic_regions+1 )
1990
1991	CASE ( 'wpt' )
1992	dopr_index(i) = 17
1993	dopr_unit(i) = 'K m/s'
1994	hom(:,2,17,:) = SPREAD( zw, 2, statistic_regions+1 )
1995
1996	CASE ( 'wpt' )
1997	dopr_index(i) = 18
1998	dopr_unit(i) = 'K m/s'
1999	hom(:,2,18,:) = SPREAD( zw, 2, statistic_regions+1 )
2000
2001	CASE ( 'wu' )
2002	dopr_index(i) = 19
2003	dopr_unit(i) = 'm2/s2'
2004	hom(:,2,19,:) = SPREAD( zw, 2, statistic_regions+1 )
2005	IF ( prandtl_layer ) hom(nzb,2,19,:) = zu(1)
2006
2007	CASE ( 'wv' )
2008	dopr_index(i) = 20
2009	dopr_unit(i) = 'm2/s2'
2010	hom(:,2,20,:) = SPREAD( zw, 2, statistic_regions+1 )
2011	IF ( prandtl_layer ) hom(nzb,2,20,:) = zu(1)
2012
2013	CASE ( 'wptBC' )
2014	dopr_index(i) = 21
2015	dopr_unit(i) = 'K m/s'
2016	hom(:,2,21,:) = SPREAD( zw, 2, statistic_regions+1 )
2017
2018	CASE ( 'wptBC' )
2019	dopr_index(i) = 22
2020	dopr_unit(i) = 'K m/s'
2021	hom(:,2,22,:) = SPREAD( zw, 2, statistic_regions+1 )
2022
2023	CASE ( 'sa', '#sa' )
2024	IF ( .NOT. ocean ) THEN
2025	message_string = 'data_output_pr = ' // &
2026	TRIM( data_output_pr(i) ) // ' is not imp' // &
2027	'lemented for ocean = .FALSE.'
2028	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2029	ELSE
2030	dopr_index(i) = 23
2031	dopr_unit(i) = 'psu'
2032	hom(:,2,23,:) = SPREAD( zu, 2, statistic_regions+1 )
2033	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2034	dopr_initial_index(i) = 26
2035	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2036	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
2037	data_output_pr(i) = data_output_pr(i)(2:)
2038	ENDIF
2039	ENDIF
2040
2041	CASE ( 'u*2' )
2042	dopr_index(i) = 30
2043	dopr_unit(i) = 'm2/s2'
2044	hom(:,2,30,:) = SPREAD( zu, 2, statistic_regions+1 )
2045
2046	CASE ( 'v*2' )
2047	dopr_index(i) = 31
2048	dopr_unit(i) = 'm2/s2'
2049	hom(:,2,31,:) = SPREAD( zu, 2, statistic_regions+1 )
2050
2051	CASE ( 'w*2' )
2052	dopr_index(i) = 32
2053	dopr_unit(i) = 'm2/s2'
2054	hom(:,2,32,:) = SPREAD( zw, 2, statistic_regions+1 )
2055
2056	CASE ( 'pt*2' )
2057	dopr_index(i) = 33
2058	dopr_unit(i) = 'K2'
2059	hom(:,2,33,:) = SPREAD( zu, 2, statistic_regions+1 )
2060
2061	CASE ( 'e*' )
2062	dopr_index(i) = 34
2063	dopr_unit(i) = 'm2/s2'
2064	hom(:,2,34,:) = SPREAD( zu, 2, statistic_regions+1 )
2065
2066	CASE ( 'w2pt' )
2067	dopr_index(i) = 35
2068	dopr_unit(i) = 'K m2/s2'
2069	hom(:,2,35,:) = SPREAD( zw, 2, statistic_regions+1 )
2070
2071	CASE ( 'wpt2' )
2072	dopr_index(i) = 36
2073	dopr_unit(i) = 'K2 m/s'
2074	hom(:,2,36,:) = SPREAD( zw, 2, statistic_regions+1 )
2075
2076	CASE ( 'we' )
2077	dopr_index(i) = 37
2078	dopr_unit(i) = 'm3/s3'
2079	hom(:,2,37,:) = SPREAD( zw, 2, statistic_regions+1 )
2080
2081	CASE ( 'w*3' )
2082	dopr_index(i) = 38
2083	dopr_unit(i) = 'm3/s3'
2084	hom(:,2,38,:) = SPREAD( zw, 2, statistic_regions+1 )
2085
2086	CASE ( 'Sw' )
2087	dopr_index(i) = 39
2088	dopr_unit(i) = 'none'
2089	hom(:,2,39,:) = SPREAD( zw, 2, statistic_regions+1 )
2090
2091	CASE ( 'p' )
2092	dopr_index(i) = 40
2093	dopr_unit(i) = 'Pa'
2094	hom(:,2,40,:) = SPREAD( zu, 2, statistic_regions+1 )
2095
2096	CASE ( 'q', '#q' )
2097	IF ( .NOT. humidity ) THEN
2098	message_string = 'data_output_pr = ' // &
2099	TRIM( data_output_pr(i) ) // ' is not imp' // &
2100	'lemented for humidity = .FALSE.'
2101	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2102	ELSE
2103	dopr_index(i) = 41
2104	dopr_unit(i) = 'kg/kg'
2105	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
2106	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2107	dopr_initial_index(i) = 26
2108	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2109	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
2110	data_output_pr(i) = data_output_pr(i)(2:)
2111	ENDIF
2112	ENDIF
2113
2114	CASE ( 's', '#s' )
2115	IF ( .NOT. passive_scalar ) THEN
2116	message_string = 'data_output_pr = ' // &
2117	TRIM( data_output_pr(i) ) // ' is not imp' // &
2118	'lemented for passive_scalar = .FALSE.'
2119	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2120	ELSE
2121	dopr_index(i) = 41
2122	dopr_unit(i) = 'kg/m3'
2123	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
2124	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2125	dopr_initial_index(i) = 26
2126	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2127	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
2128	data_output_pr(i) = data_output_pr(i)(2:)
2129	ENDIF
2130	ENDIF
2131
2132	CASE ( 'qv', '#qv' )
2133	IF ( .NOT. cloud_physics ) THEN
2134	dopr_index(i) = 41
2135	dopr_unit(i) = 'kg/kg'
2136	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
2137	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2138	dopr_initial_index(i) = 26
2139	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2140	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
2141	data_output_pr(i) = data_output_pr(i)(2:)
2142	ENDIF
2143	ELSE
2144	dopr_index(i) = 42
2145	dopr_unit(i) = 'kg/kg'
2146	hom(:,2,42,:) = SPREAD( zu, 2, statistic_regions+1 )
2147	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2148	dopr_initial_index(i) = 27
2149	hom(:,2,27,:) = SPREAD( zu, 2, statistic_regions+1 )
2150	hom(nzb,2,27,:) = 0.0 ! weil zu(nzb) negativ ist
2151	data_output_pr(i) = data_output_pr(i)(2:)
2152	ENDIF
2153	ENDIF
2154
2155	CASE ( 'lpt', '#lpt' )
2156	IF ( .NOT. cloud_physics ) THEN
2157	message_string = 'data_output_pr = ' // &
2158	TRIM( data_output_pr(i) ) // ' is not imp' // &
2159	'lemented for cloud_physics = .FALSE.'
2160	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2161	ELSE
2162	dopr_index(i) = 4
2163	dopr_unit(i) = 'K'
2164	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
2165	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2166	dopr_initial_index(i) = 7
2167	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
2168	hom(nzb,2,7,:) = 0.0 ! weil zu(nzb) negativ ist
2169	data_output_pr(i) = data_output_pr(i)(2:)
2170	ENDIF
2171	ENDIF
2172
2173	CASE ( 'vpt', '#vpt' )
2174	dopr_index(i) = 44
2175	dopr_unit(i) = 'K'
2176	hom(:,2,44,:) = SPREAD( zu, 2, statistic_regions+1 )
2177	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2178	dopr_initial_index(i) = 29
2179	hom(:,2,29,:) = SPREAD( zu, 2, statistic_regions+1 )
2180	hom(nzb,2,29,:) = 0.0 ! weil zu(nzb) negativ ist
2181	data_output_pr(i) = data_output_pr(i)(2:)
2182	ENDIF
2183
2184	CASE ( 'w"vpt"' )
2185	dopr_index(i) = 45
2186	dopr_unit(i) = 'K m/s'
2187	hom(:,2,45,:) = SPREAD( zw, 2, statistic_regions+1 )
2188
2189	CASE ( 'wvpt' )
2190	dopr_index(i) = 46
2191	dopr_unit(i) = 'K m/s'
2192	hom(:,2,46,:) = SPREAD( zw, 2, statistic_regions+1 )
2193
2194	CASE ( 'wvpt' )
2195	dopr_index(i) = 47
2196	dopr_unit(i) = 'K m/s'
2197	hom(:,2,47,:) = SPREAD( zw, 2, statistic_regions+1 )
2198
2199	CASE ( 'w"q"' )
2200	IF ( .NOT. humidity ) THEN
2201	message_string = 'data_output_pr = ' // &
2202	TRIM( data_output_pr(i) ) // ' is not imp' // &
2203	'lemented for humidity = .FALSE.'
2204	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2205	ELSE
2206	dopr_index(i) = 48
2207	dopr_unit(i) = 'kg/kg m/s'
2208	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2209	ENDIF
2210
2211	CASE ( 'wq' )
2212	IF ( .NOT. humidity ) THEN
2213	message_string = 'data_output_pr = ' // &
2214	TRIM( data_output_pr(i) ) // ' is not imp' // &
2215	'lemented for humidity = .FALSE.'
2216	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2217	ELSE
2218	dopr_index(i) = 49
2219	dopr_unit(i) = 'kg/kg m/s'
2220	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2221	ENDIF
2222
2223	CASE ( 'wq' )
2224	IF ( .NOT. humidity ) THEN
2225	message_string = 'data_output_pr = ' // &
2226	TRIM( data_output_pr(i) ) // ' is not imp' // &
2227	'lemented for humidity = .FALSE.'
2228	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2229	ELSE
2230	dopr_index(i) = 50
2231	dopr_unit(i) = 'kg/kg m/s'
2232	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2233	ENDIF
2234
2235	CASE ( 'w"s"' )
2236	IF ( .NOT. passive_scalar ) THEN
2237	message_string = 'data_output_pr = ' // &
2238	TRIM( data_output_pr(i) ) // ' is not imp' // &
2239	'lemented for passive_scalar = .FALSE.'
2240	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2241	ELSE
2242	dopr_index(i) = 48
2243	dopr_unit(i) = 'kg/m3 m/s'
2244	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2245	ENDIF
2246
2247	CASE ( 'ws' )
2248	IF ( .NOT. passive_scalar ) THEN
2249	message_string = 'data_output_pr = ' // &
2250	TRIM( data_output_pr(i) ) // ' is not imp' // &
2251	'lemented for passive_scalar = .FALSE.'
2252	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2253	ELSE
2254	dopr_index(i) = 49
2255	dopr_unit(i) = 'kg/m3 m/s'
2256	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2257	ENDIF
2258
2259	CASE ( 'ws' )
2260	IF ( .NOT. passive_scalar ) THEN
2261	message_string = 'data_output_pr = ' // &
2262	TRIM( data_output_pr(i) ) // ' is not imp' // &
2263	'lemented for passive_scalar = .FALSE.'
2264	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2265	ELSE
2266	dopr_index(i) = 50
2267	dopr_unit(i) = 'kg/m3 m/s'
2268	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2269	ENDIF
2270
2271	CASE ( 'w"qv"' )
2272	IF ( humidity .AND. .NOT. cloud_physics ) &
2273	THEN
2274	dopr_index(i) = 48
2275	dopr_unit(i) = 'kg/kg m/s'
2276	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2277	ELSEIF( humidity .AND. cloud_physics ) THEN
2278	dopr_index(i) = 51
2279	dopr_unit(i) = 'kg/kg m/s'
2280	hom(:,2,51,:) = SPREAD( zw, 2, statistic_regions+1 )
2281	ELSE
2282	message_string = 'data_output_pr = ' // &
2283	TRIM( data_output_pr(i) ) // ' is not imp' // &
2284	'lemented for cloud_physics = .FALSE. an&' // &
2285	'd humidity = .FALSE.'
2286	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2287	ENDIF
2288
2289	CASE ( 'wqv' )
2290	IF ( humidity .AND. .NOT. cloud_physics ) &
2291	THEN
2292	dopr_index(i) = 49
2293	dopr_unit(i) = 'kg/kg m/s'
2294	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2295	ELSEIF( humidity .AND. cloud_physics ) THEN
2296	dopr_index(i) = 52
2297	dopr_unit(i) = 'kg/kg m/s'
2298	hom(:,2,52,:) = SPREAD( zw, 2, statistic_regions+1 )
2299	ELSE
2300	message_string = 'data_output_pr = ' // &
2301	TRIM( data_output_pr(i) ) // ' is not imp' // &
2302	'lemented for cloud_physics = .FALSE. an&' // &
2303	'd humidity = .FALSE.'
2304	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2305	ENDIF
2306
2307	CASE ( 'wqv' )
2308	IF ( humidity .AND. .NOT. cloud_physics ) &
2309	THEN
2310	dopr_index(i) = 50
2311	dopr_unit(i) = 'kg/kg m/s'
2312	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2313	ELSEIF( humidity .AND. cloud_physics ) THEN
2314	dopr_index(i) = 53
2315	dopr_unit(i) = 'kg/kg m/s'
2316	hom(:,2,53,:) = SPREAD( zw, 2, statistic_regions+1 )
2317	ELSE
2318	message_string = 'data_output_pr = ' // &
2319	TRIM( data_output_pr(i) ) // ' is not imp' // &
2320	'lemented for cloud_physics = .FALSE. an&' // &
2321	'd humidity = .FALSE.'
2322	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2323	ENDIF
2324
2325	CASE ( 'ql' )
2326	IF ( .NOT. cloud_physics .AND. .NOT. cloud_droplets ) THEN
2327	message_string = 'data_output_pr = ' // &
2328	TRIM( data_output_pr(i) ) // ' is not imp' // &
2329	'lemented for cloud_physics = .FALSE. or' // &
2330	'&cloud_droplets = .FALSE.'
2331	CALL message( 'check_parameters', 'PA0096', 1, 2, 0, 6, 0 )
2332	ELSE
2333	dopr_index(i) = 54
2334	dopr_unit(i) = 'kg/kg'
2335	hom(:,2,54,:) = SPREAD( zu, 2, statistic_regions+1 )
2336	ENDIF
2337
2338	CASE ( 'wuu*:dz' )
2339	dopr_index(i) = 55
2340	dopr_unit(i) = 'm2/s3'
2341	hom(:,2,55,:) = SPREAD( zu, 2, statistic_regions+1 )
2342
2343	CASE ( 'wp:dz' )
2344	dopr_index(i) = 56
2345	dopr_unit(i) = 'm2/s3'
2346	hom(:,2,56,:) = SPREAD( zw, 2, statistic_regions+1 )
2347
2348	CASE ( 'w"e:dz' )
2349	dopr_index(i) = 57
2350	dopr_unit(i) = 'm2/s3'
2351	hom(:,2,57,:) = SPREAD( zu, 2, statistic_regions+1 )
2352
2353
2354	CASE ( 'u"pt"' )
2355	dopr_index(i) = 58
2356	dopr_unit(i) = 'K m/s'
2357	hom(:,2,58,:) = SPREAD( zu, 2, statistic_regions+1 )
2358
2359	CASE ( 'upt' )
2360	dopr_index(i) = 59
2361	dopr_unit(i) = 'K m/s'
2362	hom(:,2,59,:) = SPREAD( zu, 2, statistic_regions+1 )
2363
2364	CASE ( 'upt_t' )
2365	dopr_index(i) = 60
2366	dopr_unit(i) = 'K m/s'
2367	hom(:,2,60,:) = SPREAD( zu, 2, statistic_regions+1 )
2368
2369	CASE ( 'v"pt"' )
2370	dopr_index(i) = 61
2371	dopr_unit(i) = 'K m/s'
2372	hom(:,2,61,:) = SPREAD( zu, 2, statistic_regions+1 )
2373
2374	CASE ( 'vpt' )
2375	dopr_index(i) = 62
2376	dopr_unit(i) = 'K m/s'
2377	hom(:,2,62,:) = SPREAD( zu, 2, statistic_regions+1 )
2378
2379	CASE ( 'vpt_t' )
2380	dopr_index(i) = 63
2381	dopr_unit(i) = 'K m/s'
2382	hom(:,2,63,:) = SPREAD( zu, 2, statistic_regions+1 )
2383
2384	CASE ( 'rho' )
2385	IF ( .NOT. ocean ) THEN
2386	message_string = 'data_output_pr = ' // &
2387	TRIM( data_output_pr(i) ) // ' is not imp' // &
2388	'lemented for ocean = .FALSE.'
2389	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2390	ELSE
2391	dopr_index(i) = 64
2392	dopr_unit(i) = 'kg/m3'
2393	hom(:,2,64,:) = SPREAD( zu, 2, statistic_regions+1 )
2394	ENDIF
2395
2396	CASE ( 'w"sa"' )
2397	IF ( .NOT. ocean ) THEN
2398	message_string = 'data_output_pr = ' // &
2399	TRIM( data_output_pr(i) ) // ' is not imp' // &
2400	'lemented for ocean = .FALSE.'
2401	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2402	ELSE
2403	dopr_index(i) = 65
2404	dopr_unit(i) = 'psu m/s'
2405	hom(:,2,65,:) = SPREAD( zw, 2, statistic_regions+1 )
2406	ENDIF
2407
2408	CASE ( 'wsa' )
2409	IF ( .NOT. ocean ) THEN
2410	message_string = 'data_output_pr = ' // &
2411	TRIM( data_output_pr(i) ) // ' is not imp' // &
2412	'lemented for ocean = .FALSE.'
2413	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2414	ELSE
2415	dopr_index(i) = 66
2416	dopr_unit(i) = 'psu m/s'
2417	hom(:,2,66,:) = SPREAD( zw, 2, statistic_regions+1 )
2418	ENDIF
2419
2420	CASE ( 'wsa' )
2421	IF ( .NOT. ocean ) THEN
2422	message_string = 'data_output_pr = ' // &
2423	TRIM( data_output_pr(i) ) // ' is not imp' // &
2424	'lemented for ocean = .FALSE.'
2425	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2426	ELSE
2427	dopr_index(i) = 67
2428	dopr_unit(i) = 'psu m/s'
2429	hom(:,2,67,:) = SPREAD( zw, 2, statistic_regions+1 )
2430	ENDIF
2431
2432	CASE ( 'wp' )
2433	dopr_index(i) = 68
2434	dopr_unit(i) = 'm3/s3'
2435	hom(:,2,68,:) = SPREAD( zu, 2, statistic_regions+1 )
2436
2437	CASE ( 'w"e' )
2438	dopr_index(i) = 69
2439	dopr_unit(i) = 'm3/s3'
2440	hom(:,2,69,:) = SPREAD( zu, 2, statistic_regions+1 )
2441
2442	CASE ( 'q*2' )
2443	IF ( .NOT. humidity ) THEN
2444	message_string = 'data_output_pr = ' // &
2445	TRIM( data_output_pr(i) ) // ' is not imp' // &
2446	'lemented for humidity = .FALSE.'
2447	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2448	ELSE
2449	dopr_index(i) = 70
2450	dopr_unit(i) = 'kg2/kg2'
2451	hom(:,2,70,:) = SPREAD( zu, 2, statistic_regions+1 )
2452	ENDIF
2453
2454	CASE ( 'prho' )
2455	IF ( .NOT. ocean ) THEN
2456	message_string = 'data_output_pr = ' // &
2457	TRIM( data_output_pr(i) ) // ' is not imp' // &
2458	'lemented for ocean = .FALSE.'
2459	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2460	ELSE
2461	dopr_index(i) = 71
2462	dopr_unit(i) = 'kg/m3'
2463	hom(:,2,71,:) = SPREAD( zu, 2, statistic_regions+1 )
2464	ENDIF
2465
2466	CASE ( 'hyp' )
2467	dopr_index(i) = 72
2468	dopr_unit(i) = 'dbar'
2469	hom(:,2,72,:) = SPREAD( zu, 2, statistic_regions+1 )
2470
2471	CASE DEFAULT
2472
2473	CALL user_check_data_output_pr( data_output_pr(i), i, unit )
2474
2475	IF ( unit == 'illegal' ) THEN
2476	IF ( data_output_pr_user(1) /= ' ' ) THEN
2477	message_string = 'illegal value for data_output_pr or ' // &
2478	'data_output_pr_user = "' // &
2479	TRIM( data_output_pr(i) ) // '"'
2480	CALL message( 'check_parameters', 'PA0097', 1, 2, 0, 6, 0 )
2481	ELSE
2482	message_string = 'illegal value for data_output_pr = "' // &
2483	TRIM( data_output_pr(i) ) // '"'
2484	CALL message( 'check_parameters', 'PA0098', 1, 2, 0, 6, 0 )
2485	ENDIF
2486	ENDIF
2487
2488	END SELECT
2489
2490	!
2491	!-- Check to which of the predefined coordinate systems the profile belongs
2492	DO k = 1, crmax
2493	IF ( INDEX( cross_profiles(k), ' '//TRIM( data_output_pr(i) )//' ' ) &
2494	/=0 ) &
2495	THEN
2496	dopr_crossindex(i) = k
2497	EXIT
2498	ENDIF
2499	ENDDO
2500	!
2501	!-- Generate the text for the labels of the PROFIL output file. "-characters
2502	!-- must be substituted, otherwise PROFIL would interpret them as TeX
2503	!-- control characters
2504	dopr_label(i) = data_output_pr(i)
2505	position = INDEX( dopr_label(i) , '"' )
2506	DO WHILE ( position /= 0 )
2507	dopr_label(i)(position:position) = ''''
2508	position = INDEX( dopr_label(i) , '"' )
2509	ENDDO
2510
2511	ENDDO
2512
2513	!
2514	!-- y-value range of the coordinate system (PROFIL).
2515	!-- x-value range determined in plot_1d.
2516	IF ( .NOT. ocean ) THEN
2517	cross_uymin = 0.0
2518	IF ( z_max_do1d == -1.0 ) THEN
2519	cross_uymax = zu(nzt+1)
2520	ELSEIF ( z_max_do1d < zu(nzb+1) .OR. z_max_do1d > zu(nzt+1) ) THEN
2521	WRITE( message_string, * ) 'z_max_do1d = ', z_max_do1d, ' must ', &
2522	'be >= ', zu(nzb+1), ' or <= ', zu(nzt+1)
2523	CALL message( 'check_parameters', 'PA0099', 1, 2, 0, 6, 0 )
2524	ELSE
2525	cross_uymax = z_max_do1d
2526	ENDIF
2527	ENDIF
2528
2529	!
2530	!-- Check whether the chosen normalizing factor for the coordinate systems is
2531	!-- permissible
2532	DO i = 1, crmax
2533	SELECT CASE ( TRIM( cross_normalized_x(i) ) ) ! TRIM required on IBM
2534
2535	CASE ( '', 'wpt0', 'ws2', 'tsw2', 'ws3', 'ws2tsw', 'wstsw2' )
2536	j = 0
2537
2538	CASE DEFAULT
2539	message_string = 'unknown normalization method cross_normali' // &
2540	'zed_x = "' // TRIM( cross_normalized_x(i) ) // &
2541	'"'
2542	CALL message( 'check_parameters', 'PA0100', 1, 2, 0, 6, 0 )
2543
2544	END SELECT
2545	SELECT CASE ( TRIM( cross_normalized_y(i) ) ) ! TRIM required on IBM
2546
2547	CASE ( '', 'z_i' )
2548	j = 0
2549
2550	CASE DEFAULT
2551	message_string = 'unknown normalization method cross_normali' // &
2552	'zed_y = "' // TRIM( cross_normalized_y(i) ) // &
2553	'"'
2554	CALL message( 'check_parameters', 'PA0101', 1, 2, 0, 6, 0 )
2555
2556	END SELECT
2557	ENDDO
2558	!
2559	!-- Check normalized y-value range of the coordinate system (PROFIL)
2560	IF ( z_max_do1d_normalized /= -1.0 .AND. z_max_do1d_normalized <= 0.0 ) &
2561	THEN
2562	WRITE( message_string, * ) 'z_max_do1d_normalized = ', &
2563	z_max_do1d_normalized, ' must be >= 0.0'
2564	CALL message( 'check_parameters', 'PA0101', 1, 2, 0, 6, 0 )
2565	ENDIF
2566
2567
2568	!
2569	!-- Append user-defined data output variables to the standard data output
2570	IF ( data_output_user(1) /= ' ' ) THEN
2571	i = 1
2572	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
2573	i = i + 1
2574	ENDDO
2575	j = 1
2576	DO WHILE ( data_output_user(j) /= ' ' .AND. j <= 100 )
2577	IF ( i > 100 ) THEN
2578	message_string = 'number of output quantitities given by data' // &
2579	'_output and data_output_user exceeds the limit of 100'
2580	CALL message( 'check_parameters', 'PA0102', 1, 2, 0, 6, 0 )
2581	ENDIF
2582	data_output(i) = data_output_user(j)
2583	i = i + 1
2584	j = j + 1
2585	ENDDO
2586	ENDIF
2587
2588	!
2589	!-- Check and set steering parameters for 2d/3d data output and averaging
2590	i = 1
2591	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
2592	!
2593	!-- Check for data averaging
2594	ilen = LEN_TRIM( data_output(i) )
2595	j = 0 ! no data averaging
2596	IF ( ilen > 3 ) THEN
2597	IF ( data_output(i)(ilen-2:ilen) == '_av' ) THEN
2598	j = 1 ! data averaging
2599	data_output(i) = data_output(i)(1:ilen-3)
2600	ENDIF
2601	ENDIF
2602	!
2603	!-- Check for cross section or volume data
2604	ilen = LEN_TRIM( data_output(i) )
2605	k = 0 ! 3d data
2606	var = data_output(i)(1:ilen)
2607	IF ( ilen > 3 ) THEN
2608	IF ( data_output(i)(ilen-2:ilen) == '_xy' .OR. &
2609	data_output(i)(ilen-2:ilen) == '_xz' .OR. &
2610	data_output(i)(ilen-2:ilen) == '_yz' ) THEN
2611	k = 1 ! 2d data
2612	var = data_output(i)(1:ilen-3)
2613	ENDIF
2614	ENDIF
2615	!
2616	!-- Check for allowed value and set units
2617	SELECT CASE ( TRIM( var ) )
2618
2619	CASE ( 'e' )
2620	IF ( constant_diffusion ) THEN
2621	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2622	'res constant_diffusion = .FALSE.'
2623	CALL message( 'check_parameters', 'PA0103', 1, 2, 0, 6, 0 )
2624	ENDIF
2625	unit = 'm2/s2'
2626
2627	CASE ( 'lpt' )
2628	IF ( .NOT. cloud_physics ) THEN
2629	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2630	'res cloud_physics = .TRUE.'
2631	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2632	ENDIF
2633	unit = 'K'
2634
2635	CASE ( 'pc', 'pr' )
2636	IF ( .NOT. particle_advection ) THEN
2637	message_string = 'output of "' // TRIM( var ) // '" requir' // &
2638	'es a "particles_par"-NAMELIST in the parameter file (PARIN)'
2639	CALL message( 'check_parameters', 'PA0104', 1, 2, 0, 6, 0 )
2640	ENDIF
2641	IF ( TRIM( var ) == 'pc' ) unit = 'number'
2642	IF ( TRIM( var ) == 'pr' ) unit = 'm'
2643
2644	CASE ( 'q', 'vpt' )
2645	IF ( .NOT. humidity ) THEN
2646	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2647	'res humidity = .TRUE.'
2648	CALL message( 'check_parameters', 'PA0105', 1, 2, 0, 6, 0 )
2649	ENDIF
2650	IF ( TRIM( var ) == 'q' ) unit = 'kg/kg'
2651	IF ( TRIM( var ) == 'vpt' ) unit = 'K'
2652
2653	CASE ( 'ql' )
2654	IF ( .NOT. ( cloud_physics .OR. cloud_droplets ) ) THEN
2655	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2656	'res cloud_physics = .TRUE. or cloud_droplets = .TRUE.'
2657	CALL message( 'check_parameters', 'PA0106', 1, 2, 0, 6, 0 )
2658	ENDIF
2659	unit = 'kg/kg'
2660
2661	CASE ( 'ql_c', 'ql_v', 'ql_vp' )
2662	IF ( .NOT. cloud_droplets ) THEN
2663	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2664	'res cloud_droplets = .TRUE.'
2665	CALL message( 'check_parameters', 'PA0107', 1, 2, 0, 6, 0 )
2666	ENDIF
2667	IF ( TRIM( var ) == 'ql_c' ) unit = 'kg/kg'
2668	IF ( TRIM( var ) == 'ql_v' ) unit = 'm3'
2669	IF ( TRIM( var ) == 'ql_vp' ) unit = 'none'
2670
2671	CASE ( 'qv' )
2672	IF ( .NOT. cloud_physics ) THEN
2673	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2674	'res cloud_physics = .TRUE.'
2675	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2676	ENDIF
2677	unit = 'kg/kg'
2678
2679	CASE ( 'rho' )
2680	IF ( .NOT. ocean ) THEN
2681	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2682	'res ocean = .TRUE.'
2683	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
2684	ENDIF
2685	unit = 'kg/m3'
2686
2687	CASE ( 's' )
2688	IF ( .NOT. passive_scalar ) THEN
2689	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2690	'res passive_scalar = .TRUE.'
2691	CALL message( 'check_parameters', 'PA0110', 1, 2, 0, 6, 0 )
2692	ENDIF
2693	unit = 'conc'
2694
2695	CASE ( 'sa' )
2696	IF ( .NOT. ocean ) THEN
2697	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2698	'res ocean = .TRUE.'
2699	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
2700	ENDIF
2701	unit = 'psu'
2702
2703	CASE ( 'u', 't', 'lwp', 'pra', 'prr', 'qsws', 'shf', 'z0' )
2704	IF ( k == 0 .OR. data_output(i)(ilen-2:ilen) /= '_xy' ) THEN
2705	message_string = 'illegal value for data_output: "' // &
2706	TRIM( var ) // '" & only 2d-horizontal ' // &
2707	'cross sections are allowed for this value'
2708	CALL message( 'check_parameters', 'PA0111', 1, 2, 0, 6, 0 )
2709	ENDIF
2710	IF ( TRIM( var ) == 'lwp*' .AND. .NOT. cloud_physics ) THEN
2711	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2712	'res cloud_physics = .TRUE.'
2713	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2714	ENDIF
2715	IF ( TRIM( var ) == 'pra*' .AND. .NOT. precipitation ) THEN
2716	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2717	'res precipitation = .TRUE.'
2718	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2719	ENDIF
2720	IF ( TRIM( var ) == 'pra*' .AND. j == 1 ) THEN
2721	message_string = 'temporal averaging of precipitation ' // &
2722	'amount "' // TRIM( var ) // '" is not possible'
2723	CALL message( 'check_parameters', 'PA0113', 1, 2, 0, 6, 0 )
2724	ENDIF
2725	IF ( TRIM( var ) == 'prr*' .AND. .NOT. precipitation ) THEN
2726	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2727	'res precipitation = .TRUE.'
2728	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2729	ENDIF
2730	IF ( TRIM( var ) == 'qsws*' .AND. .NOT. humidity ) THEN
2731	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2732	'res humidity = .TRUE.'
2733	CALL message( 'check_parameters', 'PA0322', 1, 2, 0, 6, 0 )
2734	ENDIF
2735
2736	IF ( TRIM( var ) == 'lwp' ) unit = 'kg/kgm'
2737	IF ( TRIM( var ) == 'pra*' ) unit = 'mm'
2738	IF ( TRIM( var ) == 'prr*' ) unit = 'mm/s'
2739	IF ( TRIM( var ) == 'qsws*' ) unit = 'kgm/kgs'
2740	IF ( TRIM( var ) == 'shf' ) unit = 'Km/s'
2741	IF ( TRIM( var ) == 't*' ) unit = 'K'
2742	IF ( TRIM( var ) == 'u*' ) unit = 'm/s'
2743	IF ( TRIM( var ) == 'z0*' ) unit = 'm'
2744
2745
2746	CASE ( 'p', 'pt', 'u', 'v', 'w' )
2747	IF ( TRIM( var ) == 'p' ) unit = 'Pa'
2748	IF ( TRIM( var ) == 'pt' ) unit = 'K'
2749	IF ( TRIM( var ) == 'u' ) unit = 'm/s'
2750	IF ( TRIM( var ) == 'v' ) unit = 'm/s'
2751	IF ( TRIM( var ) == 'w' ) unit = 'm/s'
2752	CONTINUE
2753
2754	CASE DEFAULT
2755	CALL user_check_data_output( var, unit )
2756
2757	IF ( unit == 'illegal' ) THEN
2758	IF ( data_output_user(1) /= ' ' ) THEN
2759	message_string = 'illegal value for data_output or ' // &
2760	'data_output_user = "' // TRIM( data_output(i) ) // '"'
2761	CALL message( 'check_parameters', 'PA0114', 1, 2, 0, 6, 0 )
2762	ELSE
2763	message_string = 'illegal value for data_output =' // &
2764	TRIM( data_output(i) ) // '"'
2765	CALL message( 'check_parameters', 'PA0115', 1, 2, 0, 6, 0 )
2766	ENDIF
2767	ENDIF
2768
2769	END SELECT
2770	!
2771	!-- Set the internal steering parameters appropriately
2772	IF ( k == 0 ) THEN
2773	do3d_no(j) = do3d_no(j) + 1
2774	do3d(j,do3d_no(j)) = data_output(i)
2775	do3d_unit(j,do3d_no(j)) = unit
2776	ELSE
2777	do2d_no(j) = do2d_no(j) + 1
2778	do2d(j,do2d_no(j)) = data_output(i)
2779	do2d_unit(j,do2d_no(j)) = unit
2780	IF ( data_output(i)(ilen-2:ilen) == '_xy' ) THEN
2781	data_output_xy(j) = .TRUE.
2782	ENDIF
2783	IF ( data_output(i)(ilen-2:ilen) == '_xz' ) THEN
2784	data_output_xz(j) = .TRUE.
2785	ENDIF
2786	IF ( data_output(i)(ilen-2:ilen) == '_yz' ) THEN
2787	data_output_yz(j) = .TRUE.
2788	ENDIF
2789	ENDIF
2790
2791	IF ( j == 1 ) THEN
2792	!
2793	!-- Check, if variable is already subject to averaging
2794	found = .FALSE.
2795	DO k = 1, doav_n
2796	IF ( TRIM( doav(k) ) == TRIM( var ) ) found = .TRUE.
2797	ENDDO
2798
2799	IF ( .NOT. found ) THEN
2800	doav_n = doav_n + 1
2801	doav(doav_n) = var
2802	ENDIF
2803	ENDIF
2804
2805	i = i + 1
2806	ENDDO
2807
2808	!
2809	!-- Averaged 2d or 3d output requires that an averaging interval has been set
2810	IF ( doav_n > 0 .AND. averaging_interval == 0.0 ) THEN
2811	WRITE( message_string, * ) 'output of averaged quantity "', &
2812	TRIM( doav(1) ), '_av" requires to set a ', &
2813	'non-zero & averaging interval'
2814	CALL message( 'check_parameters', 'PA0323', 1, 2, 0, 6, 0 )
2815	ENDIF
2816
2817	!
2818	!-- Check sectional planes and store them in one shared array
2819	IF ( ANY( section_xy > nz + 1 ) ) THEN
2820	WRITE( message_string, * ) 'section_xy must be <= nz + 1 = ', nz + 1
2821	CALL message( 'check_parameters', 'PA0319', 1, 2, 0, 6, 0 )
2822	ENDIF
2823	IF ( ANY( section_xz > ny + 1 ) ) THEN
2824	WRITE( message_string, * ) 'section_xz must be <= ny + 1 = ', ny + 1
2825	CALL message( 'check_parameters', 'PA0320', 1, 2, 0, 6, 0 )
2826	ENDIF
2827	IF ( ANY( section_yz > nx + 1 ) ) THEN
2828	WRITE( message_string, * ) 'section_yz must be <= nx + 1 = ', nx + 1
2829	CALL message( 'check_parameters', 'PA0321', 1, 2, 0, 6, 0 )
2830	ENDIF
2831	section(:,1) = section_xy
2832	section(:,2) = section_xz
2833	section(:,3) = section_yz
2834
2835	!
2836	!-- Upper plot limit (grid point value) for 1D profiles
2837	IF ( z_max_do1d == -1.0 ) THEN
2838
2839	nz_do1d = nzt+1
2840
2841	ELSE
2842	DO k = nzb+1, nzt+1
2843	nz_do1d = k
2844	IF ( zw(k) > z_max_do1d ) EXIT
2845	ENDDO
2846	ENDIF
2847
2848	!
2849	!-- Upper plot limit for 2D vertical sections
2850	IF ( z_max_do2d == -1.0 ) z_max_do2d = zu(nzt)
2851	IF ( z_max_do2d < zu(nzb+1) .OR. z_max_do2d > zu(nzt) ) THEN
2852	WRITE( message_string, * ) 'z_max_do2d = ', z_max_do2d, &
2853	' must be >= ', zu(nzb+1), '(zu(nzb+1)) and <= ', zu(nzt), &
2854	' (zu(nzt))'
2855	CALL message( 'check_parameters', 'PA0116', 1, 2, 0, 6, 0 )
2856	ENDIF
2857
2858	!
2859	!-- Upper plot limit for 3D arrays
2860	IF ( nz_do3d == -9999 ) nz_do3d = nzt + 1
2861
2862	!
2863	!-- Determine and check accuracy for compressed 3D plot output
2864	IF ( do3d_compress ) THEN
2865	!
2866	!-- Compression only permissible on T3E machines
2867	IF ( host(1:3) /= 't3e' ) THEN
2868	message_string = 'do3d_compress = .TRUE. not allowed on host "' // &
2869	TRIM( host ) // '"'
2870	CALL message( 'check_parameters', 'PA0117', 1, 2, 0, 6, 0 )
2871	ENDIF
2872
2873	i = 1
2874	DO WHILE ( do3d_comp_prec(i) /= ' ' )
2875
2876	ilen = LEN_TRIM( do3d_comp_prec(i) )
2877	IF ( LLT( do3d_comp_prec(i)(ilen:ilen), '0' ) .OR. &
2878	LGT( do3d_comp_prec(i)(ilen:ilen), '9' ) ) THEN
2879	WRITE( message_string, * ) 'illegal precision: do3d_comp_prec', &
2880	'(', i, ') = "', TRIM(do3d_comp_prec(i)),'"'
2881	CALL message( 'check_parameters', 'PA0118', 1, 2, 0, 6, 0 )
2882	ENDIF
2883
2884	prec = IACHAR( do3d_comp_prec(i)(ilen:ilen) ) - IACHAR( '0' )
2885	var = do3d_comp_prec(i)(1:ilen-1)
2886
2887	SELECT CASE ( var )
2888
2889	CASE ( 'u' )
2890	j = 1
2891	CASE ( 'v' )
2892	j = 2
2893	CASE ( 'w' )
2894	j = 3
2895	CASE ( 'p' )
2896	j = 4
2897	CASE ( 'pt' )
2898	j = 5
2899
2900	CASE DEFAULT
2901	WRITE( message_string, * ) 'unknown variable "', &
2902	TRIM( do3d_comp_prec(i) ), '" given for do3d_comp_prec(', &
2903	i, ')'
2904	CALL message( 'check_parameters', 'PA0119', 1, 2, 0, 6, 0 )
2905
2906	END SELECT
2907
2908	plot_3d_precision(j)%precision = prec
2909	i = i + 1
2910
2911	ENDDO
2912	ENDIF
2913
2914	!
2915	!-- Check the data output format(s)
2916	IF ( data_output_format(1) == ' ' ) THEN
2917	!
2918	!-- Default value
2919	netcdf_output = .TRUE.
2920	ELSE
2921	i = 1
2922	DO WHILE ( data_output_format(i) /= ' ' )
2923
2924	SELECT CASE ( data_output_format(i) )
2925
2926	CASE ( 'netcdf' )
2927	netcdf_output = .TRUE.
2928	CASE ( 'iso2d' )
2929	iso2d_output = .TRUE.
2930	CASE ( 'profil' )
2931	profil_output = .TRUE.
2932	CASE ( 'avs' )
2933	avs_output = .TRUE.
2934
2935	CASE DEFAULT
2936	message_string = 'unknown value for data_output_format "' // &
2937	TRIM( data_output_format(i) ) // '"'
2938	CALL message( 'check_parameters', 'PA0120', 1, 2, 0, 6, 0 )
2939
2940	END SELECT
2941
2942	i = i + 1
2943	IF ( i > 10 ) EXIT
2944
2945	ENDDO
2946
2947	ENDIF
2948
2949	!
2950	!-- Check mask conditions
2951	DO mid = 1, max_masks
2952	IF ( data_output_masks(mid,1) /= ' ' .OR. &
2953	data_output_masks_user(mid,1) /= ' ' ) THEN
2954	masks = masks + 1
2955	ENDIF
2956	ENDDO
2957
2958	IF ( masks < 0 .OR. masks > max_masks ) THEN
2959	WRITE( message_string, * ) 'illegal value: masks must be >= 0 and ', &
2960	'<= ', max_masks, ' (=max_masks)'
2961	CALL message( 'check_parameters', 'PA0325', 1, 2, 0, 6, 0 )
2962	ENDIF
2963	IF ( masks > 0 ) THEN
2964	mask_scale(1) = mask_scale_x
2965	mask_scale(2) = mask_scale_y
2966	mask_scale(3) = mask_scale_z
2967	IF ( ANY( mask_scale <= 0.0 ) ) THEN
2968	WRITE( message_string, * ) &
2969	'illegal value: mask_scale_x, mask_scale_y and mask_scale_z', &
2970	'must be > 0.0'
2971	CALL message( 'check_parameters', 'PA0326', 1, 2, 0, 6, 0 )
2972	ENDIF
2973	!
2974	!-- Generate masks for masked data output
2975	CALL init_masks
2976	ENDIF
2977
2978	!
2979	!-- Check the NetCDF data format
2980	IF ( netcdf_data_format > 2 ) THEN
2981	#if defined( __netcdf4 ) && ! defined ( __check )
2982	CONTINUE
2983	#else
2984	message_string = 'NetCDF: NetCDF4 format requested but no ' // &
2985	'cpp-directive __netcdf4 given & switch ' // &
2986	'back to 64-bit offset format'
2987	CALL message( 'check_parameters', 'PA0171', 0, 1, 0, 6, 0 )
2988	netcdf_data_format = 2
2989	#endif
2990	ENDIF
2991
2992	!
2993
2994	#if ! defined( __check )
2995	!-- Check netcdf precison
2996	ldum = .FALSE.
2997	CALL define_netcdf_header( 'ch', ldum, 0 )
2998	#endif
2999	!
3000	!-- Check, whether a constant diffusion coefficient shall be used
3001	IF ( km_constant /= -1.0 ) THEN
3002	IF ( km_constant < 0.0 ) THEN
3003	WRITE( message_string, * ) 'km_constant = ', km_constant, ' < 0.0'
3004	CALL message( 'check_parameters', 'PA0121', 1, 2, 0, 6, 0 )
3005	ELSE
3006	IF ( prandtl_number < 0.0 ) THEN
3007	WRITE( message_string, * ) 'prandtl_number = ', prandtl_number, &
3008	' < 0.0'
3009	CALL message( 'check_parameters', 'PA0122', 1, 2, 0, 6, 0 )
3010	ENDIF
3011	constant_diffusion = .TRUE.
3012
3013	IF ( prandtl_layer ) THEN
3014	message_string = 'prandtl_layer is not allowed with fixed ' // &
3015	'value of km'
3016	CALL message( 'check_parameters', 'PA0123', 1, 2, 0, 6, 0 )
3017	ENDIF
3018	ENDIF
3019	ENDIF
3020
3021	!
3022	!-- In case of non-cyclic lateral boundaries, set the default maximum value
3023	!-- for the horizontal diffusivity used within the outflow damping layer,
3024	!-- and check/set the width of the damping layer
3025	IF ( bc_lr /= 'cyclic' ) THEN
3026	IF ( km_damp_max == -1.0 ) THEN
3027	km_damp_max = 0.5 * dx
3028	ENDIF
3029	IF ( outflow_damping_width == -1.0 ) THEN
3030	outflow_damping_width = MIN( 20, nx/2 )
3031	ENDIF
3032	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > nx ) THEN
3033	message_string = 'outflow_damping width out of range'
3034	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
3035	ENDIF
3036	ENDIF
3037
3038	IF ( bc_ns /= 'cyclic' ) THEN
3039	IF ( km_damp_max == -1.0 ) THEN
3040	km_damp_max = 0.5 * dy
3041	ENDIF
3042	IF ( outflow_damping_width == -1.0 ) THEN
3043	outflow_damping_width = MIN( 20, ny/2 )
3044	ENDIF
3045	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > ny ) THEN
3046	message_string = 'outflow_damping width out of range'
3047	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
3048	ENDIF
3049	ENDIF
3050
3051	!
3052	!-- Check value range for rif
3053	IF ( rif_min >= rif_max ) THEN
3054	WRITE( message_string, * ) 'rif_min = ', rif_min, ' must be less ', &
3055	'than rif_max = ', rif_max
3056	CALL message( 'check_parameters', 'PA0125', 1, 2, 0, 6, 0 )
3057	ENDIF
3058
3059	!
3060	!-- Determine upper and lower hight level indices for random perturbations
3061	IF ( disturbance_level_b == -9999999.9 ) THEN
3062	IF ( ocean ) THEN
3063	disturbance_level_b = zu((nzt*2)/3)
3064	disturbance_level_ind_b = ( nzt * 2 ) / 3
3065	ELSE
3066	disturbance_level_b = zu(nzb+3)
3067	disturbance_level_ind_b = nzb + 3
3068	ENDIF
3069	ELSEIF ( disturbance_level_b < zu(3) ) THEN
3070	WRITE( message_string, * ) 'disturbance_level_b = ', &
3071	disturbance_level_b, ' must be >= ', zu(3), '(zu(3))'
3072	CALL message( 'check_parameters', 'PA0126', 1, 2, 0, 6, 0 )
3073	ELSEIF ( disturbance_level_b > zu(nzt-2) ) THEN
3074	WRITE( message_string, * ) 'disturbance_level_b = ', &
3075	disturbance_level_b, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
3076	CALL message( 'check_parameters', 'PA0127', 1, 2, 0, 6, 0 )
3077	ELSE
3078	DO k = 3, nzt-2
3079	IF ( disturbance_level_b <= zu(k) ) THEN
3080	disturbance_level_ind_b = k
3081	EXIT
3082	ENDIF
3083	ENDDO
3084	ENDIF
3085
3086	IF ( disturbance_level_t == -9999999.9 ) THEN
3087	IF ( ocean ) THEN
3088	disturbance_level_t = zu(nzt-3)
3089	disturbance_level_ind_t = nzt - 3
3090	ELSE
3091	disturbance_level_t = zu(nzt/3)
3092	disturbance_level_ind_t = nzt / 3
3093	ENDIF
3094	ELSEIF ( disturbance_level_t > zu(nzt-2) ) THEN
3095	WRITE( message_string, * ) 'disturbance_level_t = ', &
3096	disturbance_level_t, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
3097	CALL message( 'check_parameters', 'PA0128', 1, 2, 0, 6, 0 )
3098	ELSEIF ( disturbance_level_t < disturbance_level_b ) THEN
3099	WRITE( message_string, * ) 'disturbance_level_t = ', &
3100	disturbance_level_t, ' must be >= disturbance_level_b = ', &
3101	disturbance_level_b
3102	CALL message( 'check_parameters', 'PA0129', 1, 2, 0, 6, 0 )
3103	ELSE
3104	DO k = 3, nzt-2
3105	IF ( disturbance_level_t <= zu(k) ) THEN
3106	disturbance_level_ind_t = k
3107	EXIT
3108	ENDIF
3109	ENDDO
3110	ENDIF
3111
3112	!
3113	!-- Check again whether the levels determined this way are ok.
3114	!-- Error may occur at automatic determination and too few grid points in
3115	!-- z-direction.
3116	IF ( disturbance_level_ind_t < disturbance_level_ind_b ) THEN
3117	WRITE( message_string, * ) 'disturbance_level_ind_t = ', &
3118	disturbance_level_ind_t, ' must be >= disturbance_level_b = ', &
3119	disturbance_level_b
3120	CALL message( 'check_parameters', 'PA0130', 1, 2, 0, 6, 0 )
3121	ENDIF
3122
3123	!
3124	!-- Determine the horizontal index range for random perturbations.
3125	!-- In case of non-cyclic horizontal boundaries, no perturbations are imposed
3126	!-- near the inflow and the perturbation area is further limited to ...(1)
3127	!-- after the initial phase of the flow.
3128	dist_nxl = 0; dist_nxr = nx
3129	dist_nys = 0; dist_nyn = ny
3130	IF ( bc_lr /= 'cyclic' ) THEN
3131	IF ( inflow_disturbance_begin == -1 ) THEN
3132	inflow_disturbance_begin = MIN( 10, nx/2 )
3133	ENDIF
3134	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > nx )&
3135	THEN
3136	message_string = 'inflow_disturbance_begin out of range'
3137	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
3138	ENDIF
3139	IF ( inflow_disturbance_end == -1 ) THEN
3140	inflow_disturbance_end = MIN( 100, 3*nx/4 )
3141	ENDIF
3142	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > nx ) &
3143	THEN
3144	message_string = 'inflow_disturbance_end out of range'
3145	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
3146	ENDIF
3147	ELSEIF ( bc_ns /= 'cyclic' ) THEN
3148	IF ( inflow_disturbance_begin == -1 ) THEN
3149	inflow_disturbance_begin = MIN( 10, ny/2 )
3150	ENDIF
3151	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > ny )&
3152	THEN
3153	message_string = 'inflow_disturbance_begin out of range'
3154	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
3155	ENDIF
3156	IF ( inflow_disturbance_end == -1 ) THEN
3157	inflow_disturbance_end = MIN( 100, 3*ny/4 )
3158	ENDIF
3159	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > ny ) &
3160	THEN
3161	message_string = 'inflow_disturbance_end out of range'
3162	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
3163	ENDIF
3164	ENDIF
3165
3166	IF ( bc_lr == 'radiation/dirichlet' ) THEN
3167	dist_nxr = nx - inflow_disturbance_begin
3168	dist_nxl(1) = nx - inflow_disturbance_end
3169	ELSEIF ( bc_lr == 'dirichlet/radiation' ) THEN
3170	dist_nxl = inflow_disturbance_begin
3171	dist_nxr(1) = inflow_disturbance_end
3172	ENDIF
3173	IF ( bc_ns == 'dirichlet/radiation' ) THEN
3174	dist_nyn = ny - inflow_disturbance_begin
3175	dist_nys(1) = ny - inflow_disturbance_end
3176	ELSEIF ( bc_ns == 'radiation/dirichlet' ) THEN
3177	dist_nys = inflow_disturbance_begin
3178	dist_nyn(1) = inflow_disturbance_end
3179	ENDIF
3180
3181	!
3182	!-- A turbulent inflow requires Dirichlet conditions at the respective inflow
3183	!-- boundary (so far, a turbulent inflow is realized from the left side only)
3184	IF ( turbulent_inflow .AND. bc_lr /= 'dirichlet/radiation' ) THEN
3185	message_string = 'turbulent_inflow = .T. requires a Dirichlet ' // &
3186	'condition at the inflow boundary'
3187	CALL message( 'check_parameters', 'PA0133', 1, 2, 0, 6, 0 )
3188	ENDIF
3189
3190	!
3191	!-- In case of turbulent inflow calculate the index of the recycling plane
3192	IF ( turbulent_inflow ) THEN
3193	IF ( recycling_width == 9999999.9 ) THEN
3194	!
3195	!-- Set the default value for the width of the recycling domain
3196	recycling_width = 0.1 * nx * dx
3197	ELSE
3198	IF ( recycling_width < dx .OR. recycling_width > nx * dx ) THEN
3199	WRITE( message_string, * ) 'illegal value for recycling_width:', &
3200	' ', recycling_width
3201	CALL message( 'check_parameters', 'PA0134', 1, 2, 0, 6, 0 )
3202	ENDIF
3203	ENDIF
3204	!
3205	!-- Calculate the index
3206	recycling_plane = recycling_width / dx
3207	ENDIF
3208
3209	!
3210	!-- Check random generator
3211	IF ( random_generator /= 'system-specific' .AND. &
3212	random_generator /= 'numerical-recipes' ) THEN
3213	message_string = 'unknown random generator: random_generator = "' // &
3214	TRIM( random_generator ) // '"'
3215	CALL message( 'check_parameters', 'PA0135', 1, 2, 0, 6, 0 )
3216	ENDIF
3217
3218	!
3219	!-- Determine damping level index for 1D model
3220	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
3221	IF ( damp_level_1d == -1.0 ) THEN
3222	damp_level_1d = zu(nzt+1)
3223	damp_level_ind_1d = nzt + 1
3224	ELSEIF ( damp_level_1d < 0.0 .OR. damp_level_1d > zu(nzt+1) ) THEN
3225	WRITE( message_string, * ) 'damp_level_1d = ', damp_level_1d, &
3226	' must be > 0.0 and < ', zu(nzt+1), '(zu(nzt+1))'
3227	CALL message( 'check_parameters', 'PA0136', 1, 2, 0, 6, 0 )
3228	ELSE
3229	DO k = 1, nzt+1
3230	IF ( damp_level_1d <= zu(k) ) THEN
3231	damp_level_ind_1d = k
3232	EXIT
3233	ENDIF
3234	ENDDO
3235	ENDIF
3236	ENDIF
3237
3238	!
3239	!-- Check some other 1d-model parameters
3240	IF ( TRIM( mixing_length_1d ) /= 'as_in_3d_model' .AND. &
3241	TRIM( mixing_length_1d ) /= 'blackadar' ) THEN
3242	message_string = 'mixing_length_1d = "' // TRIM( mixing_length_1d ) // &
3243	'" is unknown'
3244	CALL message( 'check_parameters', 'PA0137', 1, 2, 0, 6, 0 )
3245	ENDIF
3246	IF ( TRIM( dissipation_1d ) /= 'as_in_3d_model' .AND. &
3247	TRIM( dissipation_1d ) /= 'detering' ) THEN
3248	message_string = 'dissipation_1d = "' // TRIM( dissipation_1d ) // &
3249	'" is unknown'
3250	CALL message( 'check_parameters', 'PA0138', 1, 2, 0, 6, 0 )
3251	ENDIF
3252
3253	!
3254	!-- Set time for the next user defined restart (time_restart is the
3255	!-- internal parameter for steering restart events)
3256	IF ( restart_time /= 9999999.9 ) THEN
3257	IF ( restart_time > time_since_reference_point ) THEN
3258	time_restart = restart_time
3259	ENDIF
3260	ELSE
3261	!
3262	!-- In case of a restart run, set internal parameter to default (no restart)
3263	!-- if the NAMELIST-parameter restart_time is omitted
3264	time_restart = 9999999.9
3265	ENDIF
3266
3267	!
3268	!-- Set default value of the time needed to terminate a model run
3269	IF ( termination_time_needed == -1.0 ) THEN
3270	IF ( host(1:3) == 'ibm' ) THEN
3271	termination_time_needed = 300.0
3272	ELSE
3273	termination_time_needed = 35.0
3274	ENDIF
3275	ENDIF
3276
3277	!
3278	!-- Check the time needed to terminate a model run
3279	IF ( host(1:3) == 't3e' ) THEN
3280	!
3281	!-- Time needed must be at least 30 seconds on all CRAY machines, because
3282	!-- MPP_TREMAIN gives the remaining CPU time only in steps of 30 seconds
3283	IF ( termination_time_needed <= 30.0 ) THEN
3284	WRITE( message_string, * ) 'termination_time_needed = ', &
3285	termination_time_needed, ' must be > 30.0 on host "', &
3286	TRIM( host ), '"'
3287	CALL message( 'check_parameters', 'PA0139', 1, 2, 0, 6, 0 )
3288	ENDIF
3289	ELSEIF ( host(1:3) == 'ibm' ) THEN
3290	!
3291	!-- On IBM-regatta machines the time should be at least 300 seconds,
3292	!-- because the job time consumed before executing palm (for compiling,
3293	!-- copying of files, etc.) has to be regarded
3294	IF ( termination_time_needed < 300.0 ) THEN
3295	WRITE( message_string, * ) 'termination_time_needed = ', &
3296	termination_time_needed, ' should be >= 300.0 on host "', &
3297	TRIM( host ), '"'
3298	CALL message( 'check_parameters', 'PA0140', 1, 2, 0, 6, 0 )
3299	ENDIF
3300	ENDIF
3301
3302	!
3303	!-- Check pressure gradient conditions
3304	IF ( dp_external .AND. conserve_volume_flow ) THEN
3305	WRITE( message_string, * ) 'Both dp_external and conserve_volume_flo', &
3306	'w are .TRUE. but one of them must be .FALSE.'
3307	CALL message( 'check_parameters', 'PA0150', 1, 2, 0, 6, 0 )
3308	ENDIF
3309	IF ( dp_external ) THEN
3310	IF ( dp_level_b < zu(nzb) .OR. dp_level_b > zu(nzt) ) THEN
3311	WRITE( message_string, * ) 'dp_level_b = ', dp_level_b, ' is out ', &
3312	' of range'
3313	CALL message( 'check_parameters', 'PA0151', 1, 2, 0, 6, 0 )
3314	ENDIF
3315	IF ( .NOT. ANY( dpdxy /= 0.0 ) ) THEN
3316	WRITE( message_string, * ) 'dp_external is .TRUE. but dpdxy is ze', &
3317	'ro, i.e. the external pressure gradient & will not be applied'
3318	CALL message( 'check_parameters', 'PA0152', 0, 1, 0, 6, 0 )
3319	ENDIF
3320	ENDIF
3321	IF ( ANY( dpdxy /= 0.0 ) .AND. .NOT. dp_external ) THEN
3322	WRITE( message_string, * ) 'dpdxy is nonzero but dp_external is ', &
3323	'.FALSE., i.e. the external pressure gradient & will not be applied'
3324	CALL message( 'check_parameters', 'PA0153', 0, 1, 0, 6, 0 )
3325	ENDIF
3326	IF ( conserve_volume_flow ) THEN
3327	IF ( TRIM( conserve_volume_flow_mode ) == 'default' ) THEN
3328
3329	conserve_volume_flow_mode = 'initial_profiles'
3330
3331	ELSEIF ( TRIM( conserve_volume_flow_mode ) /= 'initial_profiles' .AND. &
3332	TRIM( conserve_volume_flow_mode ) /= 'inflow_profile' .AND. &
3333	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) THEN
3334	WRITE( message_string, * ) 'unknown conserve_volume_flow_mode: ', &
3335	conserve_volume_flow_mode
3336	CALL message( 'check_parameters', 'PA0154', 1, 2, 0, 6, 0 )
3337	ENDIF
3338	IF ( (bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic') .AND. &
3339	TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
3340	WRITE( message_string, * ) 'non-cyclic boundary conditions ', &
3341	'require conserve_volume_flow_mode = ''initial_profiles'''
3342	CALL message( 'check_parameters', 'PA0155', 1, 2, 0, 6, 0 )
3343	ENDIF
3344	IF ( bc_lr == 'cyclic' .AND. bc_ns == 'cyclic' .AND. &
3345	TRIM( conserve_volume_flow_mode ) == 'inflow_profile' ) THEN
3346	WRITE( message_string, * ) 'cyclic boundary conditions ', &
3347	'require conserve_volume_flow_mode = ''initial_profiles''', &
3348	' or ''bulk_velocity'''
3349	CALL message( 'check_parameters', 'PA0156', 1, 2, 0, 6, 0 )
3350	ENDIF
3351	ENDIF
3352	IF ( ( u_bulk /= 0.0 .OR. v_bulk /= 0.0 ) .AND. &
3353	( .NOT. conserve_volume_flow .OR. &
3354	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) ) THEN
3355	WRITE( message_string, * ) 'nonzero bulk velocity requires ', &
3356	'conserve_volume_flow = .T. and ', &
3357	'conserve_volume_flow_mode = ''bulk_velocity'''
3358	CALL message( 'check_parameters', 'PA0157', 1, 2, 0, 6, 0 )
3359	ENDIF
3360
3361	!
3362	!-- Check particle attributes
3363	IF ( particle_color /= 'none' ) THEN
3364	IF ( particle_color /= 'absuv' .AND. particle_color /= 'pt*' .AND. &
3365	particle_color /= 'z' ) THEN
3366	message_string = 'illegal value for parameter particle_color: ' // &
3367	TRIM( particle_color)
3368	CALL message( 'check_parameters', 'PA0313', 1, 2, 0, 6, 0 )
3369	ELSE
3370	IF ( color_interval(2) <= color_interval(1) ) THEN
3371	message_string = 'color_interval(2) <= color_interval(1)'
3372	CALL message( 'check_parameters', 'PA0315', 1, 2, 0, 6, 0 )
3373	ENDIF
3374	ENDIF
3375	ENDIF
3376
3377	IF ( particle_dvrpsize /= 'none' ) THEN
3378	IF ( particle_dvrpsize /= 'absw' ) THEN
3379	message_string = 'illegal value for parameter particle_dvrpsize:' // &
3380	' ' // TRIM( particle_color)
3381	CALL message( 'check_parameters', 'PA0314', 1, 2, 0, 6, 0 )
3382	ELSE
3383	IF ( dvrpsize_interval(2) <= dvrpsize_interval(1) ) THEN
3384	message_string = 'dvrpsize_interval(2) <= dvrpsize_interval(1)'
3385	CALL message( 'check_parameters', 'PA0316', 1, 2, 0, 6, 0 )
3386	ENDIF
3387	ENDIF
3388	ENDIF
3389
3390	!
3391	!-- Check &userpar parameters
3392	CALL user_check_parameters
3393
3394
3395
3396	END SUBROUTINE check_parameters

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |