Home

Context Navigation

check_parameters.f90 @ 828

Last change on this file since 828 was 828, checked in by raasch, 12 years ago

New:
---

Changed:

Optimization of collision kernels. Collision tables can be calculated once at
simulation start for defined radius (and dissipation) classes instead of
re-calculating them at every timestep and for the particle ensemble in
every gridbox.
For this purpose the particle feature color is renamed class.
New parpar parameters radius_classes and dissipation_classes.
(Makefile, advec_particles, check_parameters, data_output_dvrp, header, init_particles, lpm_collision_kernels, modules, package_parin, set_particle_attributes)

Lower limit for droplet radius changed from 1E-7 to 1E-8.
(advec_particles)

Complete re-formatting of collision code (including changes in names of
variables, modules and subroutines).
(advec_particles, lpm_collision_kernels)

Errors:

Bugfix: transformation factor for dissipation changed from 1E5 to 1E4
(advec_particles, lpm_collision_kernels)

Property svn:keywords set to Id

File size: 132.1 KB

Line
1	SUBROUTINE check_parameters
2
3	!------------------------------------------------------------------------------!
4	! Current revisions:
5	! -----------------
6	! check of collision_kernel extended
7	!
8	! Former revisions:
9	! -----------------
10	! $Id: check_parameters.f90 828 2012-02-21 12:00:36Z raasch $
11	!
12	! 825 2012-02-19 03:03:44Z raasch
13	! check for collision_kernel and curvature_solution_effects
14	!
15	! 809 2012-01-30 13:32:58Z maronga
16	! Bugfix: replaced .AND. and .NOT. with && and ! in the preprocessor directives
17	!
18	! 807 2012-01-25 11:53:51Z maronga
19	! New cpp directive "__check" implemented which is used by check_namelist_files
20	!
21	! 774 2011-10-27 13:34:16Z letzel
22	! bugfix for prescribed u,v-profiles
23	!
24	! 767 2011-10-14 06:39:12Z raasch
25	! Calculating u,v-profiles from given profiles by linear interpolation.
26	! bugfix: dirichlet_0 conditions for ug/vg moved from init_3d_model to here
27	!
28	! 707 2011-03-29 11:39:40Z raasch
29	! setting of bc_lr/ns_dirrad/raddir
30	!
31	! 689 2011-02-20 19:31:12z gryschka
32	! Bugfix for some logical expressions
33	! (syntax was not compatible with all compilers)
34	!
35	! 680 2011-02-04 23:16:06Z gryschka
36	! init_vortex is not allowed with volume_flow_control
37	!
38	! 673 2011-01-18 16:19:48Z suehring
39	! Declaration of ws_scheme_sca and ws_scheme_mom added (moved from advec_ws).
40	!
41	! 667 2010-12-23 12:06:00Z suehring/gryschka
42	! Exchange of parameters between ocean and atmosphere via PE0
43	! Check for illegal combination of ws-scheme and timestep scheme.
44	! Check for topography and ws-scheme.
45	! Check for not cyclic boundary conditions in combination with ws-scheme and
46	! loop_optimization = 'vector'.
47	! Check for call_psolver_at_all_substeps and ws-scheme for momentum_advec.
48	! Different processor/grid topology in atmosphere and ocean is now allowed!
49	! Bugfixes in checking for conserve_volume_flow_mode
50	! 600 2010-11-24 16:10:51Z raasch
51	! change due to new default value of surface_waterflux
52	! 580 2010-10-05 13:59:11Z heinze
53	! renaming of ws_vertical_gradient_level to subs_vertical_gradient_level
54	!
55	! 567 2010-10-01 10:46:30Z helmke
56	! calculating masks changed
57	!
58	! 564 2010-09-30 13:18:59Z helmke
59	! palm message identifiers of masked output changed, 20 replaced by max_masks
60	!
61	! 553 2010-09-01 14:09:06Z weinreis
62	! masks is calculated and removed from inipar
63	!
64	! 531 2010-04-21 06:47:21Z heinze
65	! Bugfix: unit of hyp changed to dbar
66	!
67	! 524 2010-03-30 02:04:51Z raasch
68	! Bugfix: "/" in netcdf profile variable names replaced by ":"
69	!
70	! 493 2010-03-01 08:30:24Z raasch
71	! netcdf_data_format is checked
72	!
73	! 411 2009-12-11 14:15:58Z heinze
74	! Enabled passive scalar/humidity wall fluxes for non-flat topography
75	! Initialization of large scale vertical motion (subsidence/ascent)
76	!
77	! 410 2009-12-04 17:05:40Z letzel
78	! masked data output
79	!
80	! 388 2009-09-23 09:40:33Z raasch
81	! Check profiles fpr prho and hyp.
82	! Bugfix: output of averaged 2d/3d quantities requires that an avaraging
83	! interval has been set, respective error message is included
84	! bc_lr_cyc and bc_ns_cyc are set,
85	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
86	! Check for illegal entries in section_xy\|xz\|yz that exceed nz+1\|ny+1\|nx+1
87	! Coupling with independent precursor runs.
88	! Check particle_color, particle_dvrpsize, color_interval, dvrpsize_interval
89	! Bugfix: pressure included for profile output
90	! Check pressure gradient conditions
91	! topography_grid_convention moved from user_check_parameters
92	! 'single_street_canyon'
93	! Added shf* and qsws* to the list of available output data
94	!
95	! 222 2009-01-12 16:04:16Z letzel
96	! +user_check_parameters
97	! Output of messages replaced by message handling routine.
98	! Implementation of an MPI-1 coupling: replaced myid with target_id,
99	! deleted __mpi2 directives
100	! Check that PALM is called with mrun -K parallel for coupling
101	!
102	! 197 2008-09-16 15:29:03Z raasch
103	! Bug fix: Construction of vertical profiles when 10 gradients have been
104	! specified in the parameter list (ug, vg, pt, q, sa, lad)
105	!
106	! Strict grid matching along z is not needed for mg-solver.
107	! Leaf area density (LAD) explicitly set to its surface value at k=0
108	! Case of reading data for recycling included in initializing_actions,
109	! check of turbulent_inflow and calculation of recycling_plane.
110	! q*2 profile added
111	!
112	! 138 2007-11-28 10:03:58Z letzel
113	! Plant canopy added
114	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
115	! Multigrid solver allows topography, checking of dt_sort_particles
116	! Bugfix: initializing u_init and v_init in case of ocean runs
117	!
118	! 109 2007-08-28 15:26:47Z letzel
119	! Check coupling_mode and set default (obligatory) values (like boundary
120	! conditions for temperature and fluxes) in case of coupled runs.
121	! +profiles for wp and w"e
122	! Bugfix: Error message concerning output of particle concentration (pc)
123	! modified
124	! More checks and more default values for coupled runs
125	! allow data_output_pr= q, wq, w"q", wq for humidity = .T. (instead of
126	! cloud_physics = .T.)
127	! Rayleigh damping for ocean fixed.
128	! Check and, if necessary, set default value for dt_coupling
129	!
130	! 97 2007-06-21 08:23:15Z raasch
131	! Initial salinity profile is calculated, salinity boundary conditions are
132	! checked,
133	! z_max_do1d is checked only in case of ocean = .f.,
134	! +initial temperature and geostrophic velocity profiles for the ocean version,
135	! use_pt_reference renamed use_reference
136	!
137	! 89 2007-05-25 12:08:31Z raasch
138	! Check for user-defined profiles
139	!
140	! 75 2007-03-22 09:54:05Z raasch
141	! "by_user" allowed as initializing action, -data_output_ts,
142	! leapfrog with non-flat topography not allowed any more, loop_optimization
143	! and pt_reference are checked, moisture renamed humidity,
144	! output of precipitation amount/rate and roughnes length + check
145	! possible negative humidities are avoided in initial profile,
146	! dirichlet/neumann changed to dirichlet/radiation, etc.,
147	! revision added to run_description_header
148	!
149	! 20 2007-02-26 00:12:32Z raasch
150	! Temperature and humidity gradients at top are now calculated for nzt+1,
151	! top_heatflux and respective boundary condition bc_pt_t is checked
152	!
153	! RCS Log replace by Id keyword, revision history cleaned up
154	!
155	! Revision 1.61 2006/08/04 14:20:25 raasch
156	! do2d_unit and do3d_unit now defined as 2d-arrays, check of
157	! use_upstream_for_tke, default value for dt_dopts,
158	! generation of file header moved from routines palm and header to here
159	!
160	! Revision 1.1 1997/08/26 06:29:23 raasch
161	! Initial revision
162	!
163	!
164	! Description:
165	! ------------
166	! Check control parameters and deduce further quantities.
167	!------------------------------------------------------------------------------!
168
169	USE arrays_3d
170	USE cloud_parameters
171	USE constants
172	USE control_parameters
173	USE dvrp_variables
174	USE grid_variables
175	USE indices
176	USE model_1d
177	USE netcdf_control
178	USE particle_attributes
179	USE pegrid
180	USE profil_parameter
181	USE subsidence_mod
182	USE statistics
183	USE transpose_indices
184
185	IMPLICIT NONE
186
187	CHARACTER (LEN=1) :: sq
188	CHARACTER (LEN=6) :: var
189	CHARACTER (LEN=7) :: unit
190	CHARACTER (LEN=8) :: date
191	CHARACTER (LEN=10) :: time
192	CHARACTER (LEN=40) :: coupling_string
193	CHARACTER (LEN=100) :: action
194
195	INTEGER :: i, ilen, intervals, iremote = 0, iter, j, k, kk, nnxh, nnyh, &
196	position, prec
197	LOGICAL :: found, ldum
198	REAL :: gradient, maxn, maxp, remote = 0.0, &
199	simulation_time_since_reference
200
201	!
202	!-- Warning, if host is not set
203	IF ( host(1:1) == ' ' ) THEN
204	message_string = '"host" is not set. Please check that environment ' // &
205	'variable "localhost" & is set before running PALM'
206	CALL message( 'check_parameters', 'PA0001', 0, 0, 0, 6, 0 )
207	ENDIF
208
209	!
210	!-- Check the coupling mode
211	IF ( coupling_mode /= 'uncoupled' .AND. &
212	coupling_mode /= 'atmosphere_to_ocean' .AND. &
213	coupling_mode /= 'ocean_to_atmosphere' ) THEN
214	message_string = 'illegal coupling mode: ' // TRIM( coupling_mode )
215	CALL message( 'check_parameters', 'PA0002', 1, 2, 0, 6, 0 )
216	ENDIF
217
218	!
219	!-- Check dt_coupling, restart_time, dt_restart, end_time, dx, dy, nx and ny
220	IF ( coupling_mode /= 'uncoupled') THEN
221
222	IF ( dt_coupling == 9999999.9 ) THEN
223	message_string = 'dt_coupling is not set but required for coup' // &
224	'ling mode "' // TRIM( coupling_mode ) // '"'
225	CALL message( 'check_parameters', 'PA0003', 1, 2, 0, 6, 0 )
226	ENDIF
227
228	#if defined( __parallel )
229
230	#if defined( __check )
231
232	!
233	!-- NOTE: coupled runs have not been implemented in the check_namelist_files
234	!-- program.
235	!-- check_namelist_files will need the following information of the other
236	!-- model (atmosphere/ocean).
237	dt_coupling = remote
238	dt_max = remote
239	restart_time = remote
240	dt_restart= remote
241	simulation_time_since_reference = remote
242	dx = remote
243
244	#endif
245
246	#if ! defined( __check )
247	IF ( myid == 0 ) THEN
248	CALL MPI_SEND( dt_coupling, 1, MPI_REAL, target_id, 11, comm_inter, &
249	ierr )
250	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 11, comm_inter, &
251	status, ierr )
252	ENDIF
253	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
254	#endif
255	IF ( dt_coupling /= remote ) THEN
256	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
257	'": dt_coupling = ', dt_coupling, '& is not equal to ', &
258	'dt_coupling_remote = ', remote
259	CALL message( 'check_parameters', 'PA0004', 1, 2, 0, 6, 0 )
260	ENDIF
261	IF ( dt_coupling <= 0.0 ) THEN
262	#if ! defined( __check )
263	IF ( myid == 0 ) THEN
264	CALL MPI_SEND( dt_max, 1, MPI_REAL, target_id, 19, comm_inter, ierr )
265	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 19, comm_inter, &
266	status, ierr )
267	ENDIF
268	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
269	#endif
270	dt_coupling = MAX( dt_max, remote )
271	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
272	'": dt_coupling <= 0.0 & is not allowed and is reset to ', &
273	'MAX(dt_max(A,O)) = ', dt_coupling
274	CALL message( 'check_parameters', 'PA0005', 0, 1, 0, 6, 0 )
275	ENDIF
276	#if ! defined( __check )
277	IF ( myid == 0 ) THEN
278	CALL MPI_SEND( restart_time, 1, MPI_REAL, target_id, 12, comm_inter, &
279	ierr )
280	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 12, comm_inter, &
281	status, ierr )
282	ENDIF
283	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
284	#endif
285	IF ( restart_time /= remote ) THEN
286	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
287	'": restart_time = ', restart_time, '& is not equal to ', &
288	'restart_time_remote = ', remote
289	CALL message( 'check_parameters', 'PA0006', 1, 2, 0, 6, 0 )
290	ENDIF
291	#if ! defined( __check )
292	IF ( myid == 0 ) THEN
293	CALL MPI_SEND( dt_restart, 1, MPI_REAL, target_id, 13, comm_inter, &
294	ierr )
295	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 13, comm_inter, &
296	status, ierr )
297	ENDIF
298	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
299	#endif
300	IF ( dt_restart /= remote ) THEN
301	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
302	'": dt_restart = ', dt_restart, '& is not equal to ', &
303	'dt_restart_remote = ', remote
304	CALL message( 'check_parameters', 'PA0007', 1, 2, 0, 6, 0 )
305	ENDIF
306
307	simulation_time_since_reference = end_time - coupling_start_time
308	#if ! defined( __check )
309	IF ( myid == 0 ) THEN
310	CALL MPI_SEND( simulation_time_since_reference, 1, MPI_REAL, target_id, &
311	14, comm_inter, ierr )
312	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 14, comm_inter, &
313	status, ierr )
314	ENDIF
315	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
316	#endif
317	IF ( simulation_time_since_reference /= remote ) THEN
318	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
319	'": simulation_time_since_reference = ', &
320	simulation_time_since_reference, '& is not equal to ', &
321	'simulation_time_since_reference_remote = ', remote
322	CALL message( 'check_parameters', 'PA0008', 1, 2, 0, 6, 0 )
323	ENDIF
324
325	#if ! defined( __check )
326	IF ( myid == 0 ) THEN
327	CALL MPI_SEND( dx, 1, MPI_REAL, target_id, 15, comm_inter, ierr )
328	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 15, comm_inter, &
329	status, ierr )
330	ENDIF
331	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
332
333	#endif
334	IF ( coupling_mode == 'atmosphere_to_ocean') THEN
335
336	IF ( dx < remote ) THEN
337	WRITE( message_string, * ) 'coupling mode "', &
338	TRIM( coupling_mode ), &
339	'": dx in Atmosphere is not equal to or not larger then dx in ocean'
340	CALL message( 'check_parameters', 'PA0009', 1, 2, 0, 6, 0 )
341	ENDIF
342
343	IF ( (nx_a+1)dx /= (nx_o+1)remote ) THEN
344	WRITE( message_string, * ) 'coupling mode "', &
345	TRIM( coupling_mode ), &
346	'": Domain size in x-direction is not equal in ocean and atmosphere'
347	CALL message( 'check_parameters', 'PA0010', 1, 2, 0, 6, 0 )
348	ENDIF
349
350	ENDIF
351
352	#if ! defined( __check )
353	IF ( myid == 0) THEN
354	CALL MPI_SEND( dy, 1, MPI_REAL, target_id, 16, comm_inter, ierr )
355	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 16, comm_inter, &
356	status, ierr )
357	ENDIF
358	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
359	#endif
360	IF ( coupling_mode == 'atmosphere_to_ocean') THEN
361
362	IF ( dy < remote ) THEN
363	WRITE( message_string, * ) 'coupling mode "', &
364	TRIM( coupling_mode ), &
365	'": dy in Atmosphere is not equal to or not larger then dy in ocean'
366	CALL message( 'check_parameters', 'PA0011', 1, 2, 0, 6, 0 )
367	ENDIF
368
369	IF ( (ny_a+1)dy /= (ny_o+1)remote ) THEN
370	WRITE( message_string, * ) 'coupling mode "', &
371	TRIM( coupling_mode ), &
372	'": Domain size in y-direction is not equal in ocean and atmosphere'
373	CALL message( 'check_parameters', 'PA0012', 1, 2, 0, 6, 0 )
374	ENDIF
375
376	IF ( MOD(nx_o+1,nx_a+1) /= 0 ) THEN
377	WRITE( message_string, * ) 'coupling mode "', &
378	TRIM( coupling_mode ), &
379	'": nx+1 in ocean is not divisible without remainder with nx+1 in', &
380	' atmosphere'
381	CALL message( 'check_parameters', 'PA0339', 1, 2, 0, 6, 0 )
382	ENDIF
383
384	IF ( MOD(ny_o+1,ny_a+1) /= 0 ) THEN
385	WRITE( message_string, * ) 'coupling mode "', &
386	TRIM( coupling_mode ), &
387	'": ny+1 in ocean is not divisible without remainder with ny+1 in', &
388	' atmosphere'
389	CALL message( 'check_parameters', 'PA0340', 1, 2, 0, 6, 0 )
390	ENDIF
391
392	ENDIF
393	#else
394	WRITE( message_string, * ) 'coupling requires PALM to be called with', &
395	' ''mrun -K parallel'''
396	CALL message( 'check_parameters', 'PA0141', 1, 2, 0, 6, 0 )
397	#endif
398	ENDIF
399
400	#if defined( __parallel ) && ! defined ( __check )
401	!
402	!-- Exchange via intercommunicator
403	IF ( coupling_mode == 'atmosphere_to_ocean' .AND. myid == 0 ) THEN
404	CALL MPI_SEND( humidity, 1, MPI_LOGICAL, target_id, 19, comm_inter, &
405	ierr )
406	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' .AND. myid == 0) THEN
407	CALL MPI_RECV( humidity_remote, 1, MPI_LOGICAL, target_id, 19, &
408	comm_inter, status, ierr )
409	ENDIF
410	CALL MPI_BCAST( humidity_remote, 1, MPI_LOGICAL, 0, comm2d, ierr)
411
412	#endif
413
414
415	!
416	!-- Generate the file header which is used as a header for most of PALM's
417	!-- output files
418	CALL DATE_AND_TIME( date, time )
419	run_date = date(7:8)//'-'//date(5:6)//'-'//date(3:4)
420	run_time = time(1:2)//':'//time(3:4)//':'//time(5:6)
421	IF ( coupling_mode == 'uncoupled' ) THEN
422	coupling_string = ''
423	ELSEIF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
424	coupling_string = ' coupled (atmosphere)'
425	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
426	coupling_string = ' coupled (ocean)'
427	ENDIF
428
429	WRITE ( run_description_header, &
430	'(A,2X,A,2X,A,A,A,I2.2,A,2X,A,A,2X,A,1X,A)' ) &
431	TRIM( version ), TRIM( revision ), 'run: ', &
432	TRIM( run_identifier ), '.', runnr, TRIM( coupling_string ), &
433	'host: ', TRIM( host ), run_date, run_time
434
435	!
436	!-- Check the general loop optimization method
437	IF ( loop_optimization == 'default' ) THEN
438	IF ( host(1:3) == 'nec' ) THEN
439	loop_optimization = 'vector'
440	ELSE
441	loop_optimization = 'cache'
442	ENDIF
443	ENDIF
444	IF ( loop_optimization /= 'noopt' .AND. loop_optimization /= 'cache' &
445	.AND. loop_optimization /= 'vector' ) THEN
446	message_string = 'illegal value given for loop_optimization: "' // &
447	TRIM( loop_optimization ) // '"'
448	CALL message( 'check_parameters', 'PA0013', 1, 2, 0, 6, 0 )
449	ENDIF
450
451	!
452	!-- Check topography setting (check for illegal parameter combinations)
453	IF ( topography /= 'flat' ) THEN
454	action = ' '
455	IF ( scalar_advec /= 'pw-scheme' ) THEN
456	WRITE( action, '(A,A)' ) 'scalar_advec = ', scalar_advec
457	ENDIF
458	IF ( momentum_advec /= 'pw-scheme' ) THEN
459	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
460	ENDIF
461	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
462	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
463	ENDIF
464	IF ( psolver == 'sor' ) THEN
465	WRITE( action, '(A,A)' ) 'psolver = ', psolver
466	ENDIF
467	IF ( sloping_surface ) THEN
468	WRITE( action, '(A)' ) 'sloping surface = .TRUE.'
469	ENDIF
470	IF ( galilei_transformation ) THEN
471	WRITE( action, '(A)' ) 'galilei_transformation = .TRUE.'
472	ENDIF
473	IF ( cloud_physics ) THEN
474	WRITE( action, '(A)' ) 'cloud_physics = .TRUE.'
475	ENDIF
476	IF ( cloud_droplets ) THEN
477	WRITE( action, '(A)' ) 'cloud_droplets = .TRUE.'
478	ENDIF
479	IF ( .NOT. prandtl_layer ) THEN
480	WRITE( action, '(A)' ) 'prandtl_layer = .FALSE.'
481	ENDIF
482	IF ( action /= ' ' ) THEN
483	message_string = 'a non-flat topography does not allow ' // &
484	TRIM( action )
485	CALL message( 'check_parameters', 'PA0014', 1, 2, 0, 6, 0 )
486	ENDIF
487	IF ( momentum_advec == 'ws-scheme' .OR. scalar_advec == 'ws-scheme' ) &
488	THEN
489	message_string = 'topography is still not allowed with ' // &
490	'momentum_advec = "' // TRIM( momentum_advec ) // &
491	'"or scalar_advec = "' // TRIM( scalar_advec ) //'"'
492	! message number still needs modification
493	CALL message( 'check_parameters', 'PA0341', 1, 2, 0, 6, 0 )
494	END IF
495
496	!
497	!-- In case of non-flat topography, check whether the convention how to
498	!-- define the topography grid has been set correctly, or whether the default
499	!-- is applicable. If this is not possible, abort.
500	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
501	IF ( TRIM( topography ) /= 'single_building' .AND. &
502	TRIM( topography ) /= 'single_street_canyon' .AND. &
503	TRIM( topography ) /= 'read_from_file' ) THEN
504	!-- The default value is not applicable here, because it is only valid
505	!-- for the two standard cases 'single_building' and 'read_from_file'
506	!-- defined in init_grid.
507	WRITE( message_string, * ) &
508	'The value for "topography_grid_convention" ', &
509	'is not set. Its default value is & only valid for ', &
510	'"topography" = ''single_building'', ', &
511	'''single_street_canyon'' & or ''read_from_file''.', &
512	' & Choose ''cell_edge'' or ''cell_center''.'
513	CALL message( 'user_check_parameters', 'PA0239', 1, 2, 0, 6, 0 )
514	ELSE
515	!-- The default value is applicable here.
516	!-- Set convention according to topography.
517	IF ( TRIM( topography ) == 'single_building' .OR. &
518	TRIM( topography ) == 'single_street_canyon' ) THEN
519	topography_grid_convention = 'cell_edge'
520	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
521	topography_grid_convention = 'cell_center'
522	ENDIF
523	ENDIF
524	ELSEIF ( TRIM( topography_grid_convention ) /= 'cell_edge' .AND. &
525	TRIM( topography_grid_convention ) /= 'cell_center' ) THEN
526	WRITE( message_string, * ) &
527	'The value for "topography_grid_convention" is ', &
528	'not recognized. & Choose ''cell_edge'' or ''cell_center''.'
529	CALL message( 'user_check_parameters', 'PA0240', 1, 2, 0, 6, 0 )
530	ENDIF
531
532	ENDIF
533
534	!
535	!-- Check ocean setting
536	IF ( ocean ) THEN
537
538	action = ' '
539	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
540	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
541	ENDIF
542	IF ( momentum_advec == 'ups-scheme' ) THEN
543	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
544	ENDIF
545	IF ( action /= ' ' ) THEN
546	message_string = 'ocean = .T. does not allow ' // TRIM( action )
547	CALL message( 'check_parameters', 'PA0015', 1, 2, 0, 6, 0 )
548	ENDIF
549
550	ELSEIF ( TRIM( coupling_mode ) == 'uncoupled' .AND. &
551	TRIM( coupling_char ) == '_O' ) THEN
552
553	!
554	!-- Check whether an (uncoupled) atmospheric run has been declared as an
555	!-- ocean run (this setting is done via mrun-option -y)
556
557	message_string = 'ocean = .F. does not allow coupling_char = "' // &
558	TRIM( coupling_char ) // '" set by mrun-option "-y"'
559	CALL message( 'check_parameters', 'PA0317', 1, 2, 0, 6, 0 )
560
561	ENDIF
562
563	!
564	!-- Check whether there are any illegal values
565	!-- Pressure solver:
566	IF ( psolver /= 'poisfft' .AND. psolver /= 'poisfft_hybrid' .AND. &
567	psolver /= 'sor' .AND. psolver /= 'multigrid' ) THEN
568	message_string = 'unknown solver for perturbation pressure: psolver' // &
569	' = "' // TRIM( psolver ) // '"'
570	CALL message( 'check_parameters', 'PA0016', 1, 2, 0, 6, 0 )
571	ENDIF
572
573	#if defined( __parallel )
574	IF ( psolver == 'poisfft_hybrid' .AND. pdims(2) /= 1 ) THEN
575	message_string = 'psolver = "' // TRIM( psolver ) // '" only works ' // &
576	'for a 1d domain-decomposition along x & please do' // &
577	' not set npey/=1 in the parameter file'
578	CALL message( 'check_parameters', 'PA0017', 1, 2, 0, 6, 0 )
579	ENDIF
580	IF ( psolver == 'poisfft_hybrid' .AND. &
581	( nxra > nxr .OR. nyna > nyn .OR. nza > nz ) .OR. &
582	psolver == 'multigrid' .AND. &
583	( nxra > nxr .OR. nyna > nyn ) ) THEN
584	message_string = 'psolver = "' // TRIM( psolver ) // '" does not ' // &
585	'work for subdomains with unequal size & please ' // &
586	'set grid_matching = ''strict'' in the parameter file'
587	CALL message( 'check_parameters', 'PA0018', 1, 2, 0, 6, 0 )
588	ENDIF
589	#else
590	IF ( psolver == 'poisfft_hybrid' ) THEN
591	message_string = 'psolver = "' // TRIM( psolver ) // '" only works' // &
592	' for a parallel environment'
593	CALL message( 'check_parameters', 'PA0019', 1, 2, 0, 6, 0 )
594	ENDIF
595	#endif
596
597	IF ( psolver == 'multigrid' ) THEN
598	IF ( cycle_mg == 'w' ) THEN
599	gamma_mg = 2
600	ELSEIF ( cycle_mg == 'v' ) THEN
601	gamma_mg = 1
602	ELSE
603	message_string = 'unknown multigrid cycle: cycle_mg = "' // &
604	TRIM( cycle_mg ) // '"'
605	CALL message( 'check_parameters', 'PA0020', 1, 2, 0, 6, 0 )
606	ENDIF
607	ENDIF
608
609	IF ( fft_method /= 'singleton-algorithm' .AND. &
610	fft_method /= 'temperton-algorithm' .AND. &
611	fft_method /= 'system-specific' ) THEN
612	message_string = 'unknown fft-algorithm: fft_method = "' // &
613	TRIM( fft_method ) // '"'
614	CALL message( 'check_parameters', 'PA0021', 1, 2, 0, 6, 0 )
615	ENDIF
616
617	IF( momentum_advec == 'ws-scheme' .AND. &
618	.NOT. call_psolver_at_all_substeps ) THEN
619	message_string = 'psolver must be called at each RK3 substep when "'//&
620	TRIM(momentum_advec) // ' "is used for momentum_advec'
621	CALL message( 'check_parameters', 'PA0344', 1, 2, 0, 6, 0 )
622	END IF
623	!
624	!-- Advection schemes:
625	!
626	!-- Set the LOGICALS to enhance the performance.
627	IF ( momentum_advec == 'ws-scheme' ) ws_scheme_mom = .TRUE.
628	IF ( scalar_advec == 'ws-scheme' ) ws_scheme_sca = .TRUE.
629
630	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme' .AND. &
631	momentum_advec /= 'ups-scheme' ) THEN
632	message_string = 'unknown advection scheme: momentum_advec = "' // &
633	TRIM( momentum_advec ) // '"'
634	CALL message( 'check_parameters', 'PA0022', 1, 2, 0, 6, 0 )
635	ENDIF
636	IF ((( momentum_advec == 'ups-scheme' .OR. scalar_advec == 'ups-scheme' )&
637	.AND. timestep_scheme /= 'euler' ) .OR. (( momentum_advec == 'ws-scheme'&
638	.OR. scalar_advec == 'ws-scheme') .AND. (timestep_scheme == 'euler' .OR. &
639	timestep_scheme == 'leapfrog+euler' .OR. timestep_scheme == 'leapfrog' &
640	.OR. timestep_scheme == 'runge-kutta-2'))) THEN
641	message_string = 'momentum_advec or scalar_advec = "' &
642	// TRIM( momentum_advec ) // '" is not allowed with timestep_scheme = "' // &
643	TRIM( timestep_scheme ) // '"'
644	CALL message( 'check_parameters', 'PA0023', 1, 2, 0, 6, 0 )
645	ENDIF
646	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'ws-scheme' .AND. &
647	scalar_advec /= 'bc-scheme' .AND. scalar_advec /= 'ups-scheme' ) THEN
648	message_string = 'unknown advection scheme: scalar_advec = "' // &
649	TRIM( scalar_advec ) // '"'
650	CALL message( 'check_parameters', 'PA0024', 1, 2, 0, 6, 0 )
651	ENDIF
652
653	IF ( use_sgs_for_particles .AND. .NOT. use_upstream_for_tke ) THEN
654	use_upstream_for_tke = .TRUE.
655	message_string = 'use_upstream_for_tke set .TRUE. because ' // &
656	'use_sgs_for_particles = .TRUE.'
657	CALL message( 'check_parameters', 'PA0025', 0, 1, 0, 6, 0 )
658	ENDIF
659
660	IF ( use_upstream_for_tke .AND. timestep_scheme(1:8) == 'leapfrog' ) THEN
661	message_string = 'use_upstream_for_tke = .TRUE. not allowed with ' // &
662	'timestep_scheme = "' // TRIM( timestep_scheme ) // '"'
663	CALL message( 'check_parameters', 'PA0026', 1, 2, 0, 6, 0 )
664	ENDIF
665
666	IF ( use_sgs_for_particles .AND. curvature_solution_effects ) THEN
667	message_string = 'use_sgs_for_particles = .TRUE. not allowed with ' // &
668	'curvature_solution_effects = .TRUE.'
669	CALL message( 'check_parameters', 'PA0349', 1, 2, 0, 6, 0 )
670	ENDIF
671
672	!
673	!-- Timestep schemes:
674	SELECT CASE ( TRIM( timestep_scheme ) )
675
676	CASE ( 'euler' )
677	intermediate_timestep_count_max = 1
678	asselin_filter_factor = 0.0
679
680	CASE ( 'leapfrog', 'leapfrog+euler' )
681	intermediate_timestep_count_max = 1
682
683	CASE ( 'runge-kutta-2' )
684	intermediate_timestep_count_max = 2
685	asselin_filter_factor = 0.0
686
687	CASE ( 'runge-kutta-3' )
688	intermediate_timestep_count_max = 3
689	asselin_filter_factor = 0.0
690
691	CASE DEFAULT
692	message_string = 'unknown timestep scheme: timestep_scheme = "' // &
693	TRIM( timestep_scheme ) // '"'
694	CALL message( 'check_parameters', 'PA0027', 1, 2, 0, 6, 0 )
695
696	END SELECT
697
698	IF ( scalar_advec == 'ups-scheme' .AND. timestep_scheme(1:5) == 'runge' )&
699	THEN
700	message_string = 'scalar advection scheme "' // TRIM( scalar_advec ) // &
701	'" & does not work with timestep_scheme "' // &
702	TRIM( timestep_scheme ) // '"'
703	CALL message( 'check_parameters', 'PA0028', 1, 2, 0, 6, 0 )
704	ENDIF
705
706	IF ( (momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme') &
707	.AND. timestep_scheme(1:5) == 'runge' ) THEN
708	message_string = 'momentum advection scheme "' // &
709	TRIM( momentum_advec ) // '" & does not work with ' // &
710	'timestep_scheme "' // TRIM( timestep_scheme ) // '"'
711	CALL message( 'check_parameters', 'PA0029', 1, 2, 0, 6, 0 )
712	ENDIF
713
714	!
715	!-- Collision kernels:
716	SELECT CASE ( TRIM( collision_kernel ) )
717
718	CASE ( 'hall', 'hall_fast' )
719	hall_kernel = .TRUE.
720
721	CASE ( 'palm' )
722	palm_kernel = .TRUE.
723
724	CASE ( 'wang', 'wang_fast' )
725	wang_kernel = .TRUE.
726
727	CASE ( 'none' )
728
729
730	CASE DEFAULT
731	message_string = 'unknown collision kernel: collision_kernel = "' // &
732	TRIM( collision_kernel ) // '"'
733	CALL message( 'check_parameters', 'PA0350', 1, 2, 0, 6, 0 )
734
735	END SELECT
736	IF ( collision_kernel(6:9) == 'fast' ) use_kernel_tables = .TRUE.
737
738
739	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
740	TRIM( initializing_actions ) /= 'cyclic_fill' ) THEN
741	!
742	!-- No restart run: several initialising actions are possible
743	action = initializing_actions
744	DO WHILE ( TRIM( action ) /= '' )
745	position = INDEX( action, ' ' )
746	SELECT CASE ( action(1:position-1) )
747
748	CASE ( 'set_constant_profiles', 'set_1d-model_profiles', &
749	'by_user', 'initialize_vortex', 'initialize_ptanom' )
750	action = action(position+1:)
751
752	CASE DEFAULT
753	message_string = 'initializing_action = "' // &
754	TRIM( action ) // '" unkown or not allowed'
755	CALL message( 'check_parameters', 'PA0030', 1, 2, 0, 6, 0 )
756
757	END SELECT
758	ENDDO
759	ENDIF
760
761	IF ( TRIM( initializing_actions ) == 'initialize_vortex' .AND. &
762	conserve_volume_flow ) THEN
763	message_string = 'initializing_actions = "initialize_vortex"' // &
764	' ist not allowed with conserve_volume_flow = .T.'
765	CALL message( 'check_parameters', 'PA0343', 1, 2, 0, 6, 0 )
766	ENDIF
767
768
769	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
770	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
771	message_string = 'initializing_actions = "set_constant_profiles"' // &
772	' and "set_1d-model_profiles" are not allowed ' // &
773	'simultaneously'
774	CALL message( 'check_parameters', 'PA0031', 1, 2, 0, 6, 0 )
775	ENDIF
776
777	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
778	INDEX( initializing_actions, 'by_user' ) /= 0 ) THEN
779	message_string = 'initializing_actions = "set_constant_profiles"' // &
780	' and "by_user" are not allowed simultaneously'
781	CALL message( 'check_parameters', 'PA0032', 1, 2, 0, 6, 0 )
782	ENDIF
783
784	IF ( INDEX( initializing_actions, 'by_user' ) /= 0 .AND. &
785	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
786	message_string = 'initializing_actions = "by_user" and ' // &
787	'"set_1d-model_profiles" are not allowed simultaneously'
788	CALL message( 'check_parameters', 'PA0033', 1, 2, 0, 6, 0 )
789	ENDIF
790
791	IF ( cloud_physics .AND. .NOT. humidity ) THEN
792	WRITE( message_string, * ) 'cloud_physics = ', cloud_physics, ' is ', &
793	'not allowed with humidity = ', humidity
794	CALL message( 'check_parameters', 'PA0034', 1, 2, 0, 6, 0 )
795	ENDIF
796
797	IF ( precipitation .AND. .NOT. cloud_physics ) THEN
798	WRITE( message_string, * ) 'precipitation = ', precipitation, ' is ', &
799	'not allowed with cloud_physics = ', cloud_physics
800	CALL message( 'check_parameters', 'PA0035', 1, 2, 0, 6, 0 )
801	ENDIF
802
803	IF ( humidity .AND. sloping_surface ) THEN
804	message_string = 'humidity = .TRUE. and sloping_surface = .TRUE. ' // &
805	'are not allowed simultaneously'
806	CALL message( 'check_parameters', 'PA0036', 1, 2, 0, 6, 0 )
807	ENDIF
808
809	IF ( humidity .AND. scalar_advec == 'ups-scheme' ) THEN
810	message_string = 'UPS-scheme is not implemented for humidity = .TRUE.'
811	CALL message( 'check_parameters', 'PA0037', 1, 2, 0, 6, 0 )
812	ENDIF
813
814	IF ( passive_scalar .AND. humidity ) THEN
815	message_string = 'humidity = .TRUE. and passive_scalar = .TRUE. ' // &
816	'is not allowed simultaneously'
817	CALL message( 'check_parameters', 'PA0038', 1, 2, 0, 6, 0 )
818	ENDIF
819
820	IF ( passive_scalar .AND. scalar_advec == 'ups-scheme' ) THEN
821	message_string = 'UPS-scheme is not implemented for passive_scalar' // &
822	' = .TRUE.'
823	CALL message( 'check_parameters', 'PA0039', 1, 2, 0, 6, 0 )
824	ENDIF
825
826	IF ( grid_matching /= 'strict' .AND. grid_matching /= 'match' ) THEN
827	message_string = 'illegal value "' // TRIM( grid_matching ) // &
828	'" found for parameter grid_matching'
829	CALL message( 'check_parameters', 'PA0040', 1, 2, 0, 6, 0 )
830	ENDIF
831
832	IF ( plant_canopy .AND. ( drag_coefficient == 0.0 ) ) THEN
833	message_string = 'plant_canopy = .TRUE. requires a non-zero drag ' // &
834	'coefficient & given value is drag_coefficient = 0.0'
835	CALL message( 'check_parameters', 'PA0041', 1, 2, 0, 6, 0 )
836	ENDIF
837
838	!
839	!-- In case of no model continuation run, check initialising parameters and
840	!-- deduce further quantities
841	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
842
843	!
844	!-- Initial profiles for 1D and 3D model, respectively (u,v further below)
845	pt_init = pt_surface
846	IF ( humidity ) q_init = q_surface
847	IF ( ocean ) sa_init = sa_surface
848	IF ( passive_scalar ) q_init = s_surface
849	IF ( plant_canopy ) lad = 0.0
850
851	!
852	!--
853	!-- If required, compute initial profile of the geostrophic wind
854	!-- (component ug)
855	i = 1
856	gradient = 0.0
857
858	IF ( .NOT. ocean ) THEN
859
860	ug_vertical_gradient_level_ind(1) = 0
861	ug(0) = ug_surface
862	DO k = 1, nzt+1
863	IF ( i < 11 ) THEN
864	IF ( ug_vertical_gradient_level(i) < zu(k) .AND. &
865	ug_vertical_gradient_level(i) >= 0.0 ) THEN
866	gradient = ug_vertical_gradient(i) / 100.0
867	ug_vertical_gradient_level_ind(i) = k - 1
868	i = i + 1
869	ENDIF
870	ENDIF
871	IF ( gradient /= 0.0 ) THEN
872	IF ( k /= 1 ) THEN
873	ug(k) = ug(k-1) + dzu(k) * gradient
874	ELSE
875	ug(k) = ug_surface + 0.5 * dzu(k) * gradient
876	ENDIF
877	ELSE
878	ug(k) = ug(k-1)
879	ENDIF
880	ENDDO
881
882	ELSE
883
884	ug_vertical_gradient_level_ind(1) = nzt+1
885	ug(nzt+1) = ug_surface
886	DO k = nzt, nzb, -1
887	IF ( i < 11 ) THEN
888	IF ( ug_vertical_gradient_level(i) > zu(k) .AND. &
889	ug_vertical_gradient_level(i) <= 0.0 ) THEN
890	gradient = ug_vertical_gradient(i) / 100.0
891	ug_vertical_gradient_level_ind(i) = k + 1
892	i = i + 1
893	ENDIF
894	ENDIF
895	IF ( gradient /= 0.0 ) THEN
896	IF ( k /= nzt ) THEN
897	ug(k) = ug(k+1) - dzu(k+1) * gradient
898	ELSE
899	ug(k) = ug_surface - 0.5 * dzu(k+1) * gradient
900	ug(k+1) = ug_surface + 0.5 * dzu(k+1) * gradient
901	ENDIF
902	ELSE
903	ug(k) = ug(k+1)
904	ENDIF
905	ENDDO
906
907	ENDIF
908
909	!
910	!-- In case of no given gradients for ug, choose a zero gradient
911	IF ( ug_vertical_gradient_level(1) == -9999999.9 ) THEN
912	ug_vertical_gradient_level(1) = 0.0
913	ENDIF
914
915	!
916	!--
917	!-- If required, compute initial profile of the geostrophic wind
918	!-- (component vg)
919	i = 1
920	gradient = 0.0
921
922	IF ( .NOT. ocean ) THEN
923
924	vg_vertical_gradient_level_ind(1) = 0
925	vg(0) = vg_surface
926	DO k = 1, nzt+1
927	IF ( i < 11 ) THEN
928	IF ( vg_vertical_gradient_level(i) < zu(k) .AND. &
929	vg_vertical_gradient_level(i) >= 0.0 ) THEN
930	gradient = vg_vertical_gradient(i) / 100.0
931	vg_vertical_gradient_level_ind(i) = k - 1
932	i = i + 1
933	ENDIF
934	ENDIF
935	IF ( gradient /= 0.0 ) THEN
936	IF ( k /= 1 ) THEN
937	vg(k) = vg(k-1) + dzu(k) * gradient
938	ELSE
939	vg(k) = vg_surface + 0.5 * dzu(k) * gradient
940	ENDIF
941	ELSE
942	vg(k) = vg(k-1)
943	ENDIF
944	ENDDO
945
946	ELSE
947
948	vg_vertical_gradient_level_ind(1) = nzt+1
949	vg(nzt+1) = vg_surface
950	DO k = nzt, nzb, -1
951	IF ( i < 11 ) THEN
952	IF ( vg_vertical_gradient_level(i) > zu(k) .AND. &
953	vg_vertical_gradient_level(i) <= 0.0 ) THEN
954	gradient = vg_vertical_gradient(i) / 100.0
955	vg_vertical_gradient_level_ind(i) = k + 1
956	i = i + 1
957	ENDIF
958	ENDIF
959	IF ( gradient /= 0.0 ) THEN
960	IF ( k /= nzt ) THEN
961	vg(k) = vg(k+1) - dzu(k+1) * gradient
962	ELSE
963	vg(k) = vg_surface - 0.5 * dzu(k+1) * gradient
964	vg(k+1) = vg_surface + 0.5 * dzu(k+1) * gradient
965	ENDIF
966	ELSE
967	vg(k) = vg(k+1)
968	ENDIF
969	ENDDO
970
971	ENDIF
972
973	!
974	!-- In case of no given gradients for vg, choose a zero gradient
975	IF ( vg_vertical_gradient_level(1) == -9999999.9 ) THEN
976	vg_vertical_gradient_level(1) = 0.0
977	ENDIF
978
979	!
980	!-- Let the initial wind profiles be the calculated ug/vg profiles or
981	!-- interpolate them from wind profile data (if given)
982	IF ( u_profile(1) == 9999999.9 .AND. v_profile(1) == 9999999.9 ) THEN
983
984	u_init = ug
985	v_init = vg
986
987	ELSEIF ( u_profile(1) == 0.0 .AND. v_profile(1) == 0.0 ) THEN
988
989	IF ( uv_heights(1) /= 0.0 ) THEN
990	message_string = 'uv_heights(1) must be 0.0'
991	CALL message( 'check_parameters', 'PA0345', 1, 2, 0, 6, 0 )
992	ENDIF
993
994	use_prescribed_profile_data = .TRUE.
995
996	kk = 1
997	u_init(0) = 0.0
998	v_init(0) = 0.0
999
1000	DO k = 1, nz+1
1001
1002	IF ( kk < 100 ) THEN
1003	DO WHILE ( uv_heights(kk+1) <= zu(k) )
1004	kk = kk + 1
1005	IF ( kk == 100 ) EXIT
1006	ENDDO
1007	ENDIF
1008
1009	IF ( kk < 100 .AND. uv_heights(kk+1) /= 9999999.9 ) THEN
1010	u_init(k) = u_profile(kk) + ( zu(k) - uv_heights(kk) ) / &
1011	( uv_heights(kk+1) - uv_heights(kk) ) * &
1012	( u_profile(kk+1) - u_profile(kk) )
1013	v_init(k) = v_profile(kk) + ( zu(k) - uv_heights(kk) ) / &
1014	( uv_heights(kk+1) - uv_heights(kk) ) * &
1015	( v_profile(kk+1) - v_profile(kk) )
1016	ELSE
1017	u_init(k) = u_profile(kk)
1018	v_init(k) = v_profile(kk)
1019	ENDIF
1020
1021	ENDDO
1022
1023	ELSE
1024
1025	message_string = 'u_profile(1) and v_profile(1) must be 0.0'
1026	CALL message( 'check_parameters', 'PA0346', 1, 2, 0, 6, 0 )
1027
1028	ENDIF
1029
1030	!
1031	!-- Compute initial temperature profile using the given temperature gradients
1032	i = 1
1033	gradient = 0.0
1034
1035	IF ( .NOT. ocean ) THEN
1036
1037	pt_vertical_gradient_level_ind(1) = 0
1038	DO k = 1, nzt+1
1039	IF ( i < 11 ) THEN
1040	IF ( pt_vertical_gradient_level(i) < zu(k) .AND. &
1041	pt_vertical_gradient_level(i) >= 0.0 ) THEN
1042	gradient = pt_vertical_gradient(i) / 100.0
1043	pt_vertical_gradient_level_ind(i) = k - 1
1044	i = i + 1
1045	ENDIF
1046	ENDIF
1047	IF ( gradient /= 0.0 ) THEN
1048	IF ( k /= 1 ) THEN
1049	pt_init(k) = pt_init(k-1) + dzu(k) * gradient
1050	ELSE
1051	pt_init(k) = pt_surface + 0.5 * dzu(k) * gradient
1052	ENDIF
1053	ELSE
1054	pt_init(k) = pt_init(k-1)
1055	ENDIF
1056	ENDDO
1057
1058	ELSE
1059
1060	pt_vertical_gradient_level_ind(1) = nzt+1
1061	DO k = nzt, 0, -1
1062	IF ( i < 11 ) THEN
1063	IF ( pt_vertical_gradient_level(i) > zu(k) .AND. &
1064	pt_vertical_gradient_level(i) <= 0.0 ) THEN
1065	gradient = pt_vertical_gradient(i) / 100.0
1066	pt_vertical_gradient_level_ind(i) = k + 1
1067	i = i + 1
1068	ENDIF
1069	ENDIF
1070	IF ( gradient /= 0.0 ) THEN
1071	IF ( k /= nzt ) THEN
1072	pt_init(k) = pt_init(k+1) - dzu(k+1) * gradient
1073	ELSE
1074	pt_init(k) = pt_surface - 0.5 * dzu(k+1) * gradient
1075	pt_init(k+1) = pt_surface + 0.5 * dzu(k+1) * gradient
1076	ENDIF
1077	ELSE
1078	pt_init(k) = pt_init(k+1)
1079	ENDIF
1080	ENDDO
1081
1082	ENDIF
1083
1084	!
1085	!-- In case of no given temperature gradients, choose gradient of neutral
1086	!-- stratification
1087	IF ( pt_vertical_gradient_level(1) == -9999999.9 ) THEN
1088	pt_vertical_gradient_level(1) = 0.0
1089	ENDIF
1090
1091	!
1092	!-- Store temperature gradient at the top boundary for possible Neumann
1093	!-- boundary condition
1094	bc_pt_t_val = ( pt_init(nzt+1) - pt_init(nzt) ) / dzu(nzt+1)
1095
1096	!
1097	!-- If required, compute initial humidity or scalar profile using the given
1098	!-- humidity/scalar gradient. In case of scalar transport, initially store
1099	!-- values of the scalar parameters on humidity parameters
1100	IF ( passive_scalar ) THEN
1101	bc_q_b = bc_s_b
1102	bc_q_t = bc_s_t
1103	q_surface = s_surface
1104	q_surface_initial_change = s_surface_initial_change
1105	q_vertical_gradient = s_vertical_gradient
1106	q_vertical_gradient_level = s_vertical_gradient_level
1107	surface_waterflux = surface_scalarflux
1108	wall_humidityflux = wall_scalarflux
1109	ENDIF
1110
1111	IF ( humidity .OR. passive_scalar ) THEN
1112
1113	i = 1
1114	gradient = 0.0
1115	q_vertical_gradient_level_ind(1) = 0
1116	DO k = 1, nzt+1
1117	IF ( i < 11 ) THEN
1118	IF ( q_vertical_gradient_level(i) < zu(k) .AND. &
1119	q_vertical_gradient_level(i) >= 0.0 ) THEN
1120	gradient = q_vertical_gradient(i) / 100.0
1121	q_vertical_gradient_level_ind(i) = k - 1
1122	i = i + 1
1123	ENDIF
1124	ENDIF
1125	IF ( gradient /= 0.0 ) THEN
1126	IF ( k /= 1 ) THEN
1127	q_init(k) = q_init(k-1) + dzu(k) * gradient
1128	ELSE
1129	q_init(k) = q_init(k-1) + 0.5 * dzu(k) * gradient
1130	ENDIF
1131	ELSE
1132	q_init(k) = q_init(k-1)
1133	ENDIF
1134	!
1135	!-- Avoid negative humidities
1136	IF ( q_init(k) < 0.0 ) THEN
1137	q_init(k) = 0.0
1138	ENDIF
1139	ENDDO
1140
1141	!
1142	!-- In case of no given humidity gradients, choose zero gradient
1143	!-- conditions
1144	IF ( q_vertical_gradient_level(1) == -1.0 ) THEN
1145	q_vertical_gradient_level(1) = 0.0
1146	ENDIF
1147
1148	!
1149	!-- Store humidity gradient at the top boundary for possile Neumann
1150	!-- boundary condition
1151	bc_q_t_val = ( q_init(nzt+1) - q_init(nzt) ) / dzu(nzt+1)
1152
1153	ENDIF
1154
1155	!
1156	!-- If required, compute initial salinity profile using the given salinity
1157	!-- gradients
1158	IF ( ocean ) THEN
1159
1160	i = 1
1161	gradient = 0.0
1162
1163	sa_vertical_gradient_level_ind(1) = nzt+1
1164	DO k = nzt, 0, -1
1165	IF ( i < 11 ) THEN
1166	IF ( sa_vertical_gradient_level(i) > zu(k) .AND. &
1167	sa_vertical_gradient_level(i) <= 0.0 ) THEN
1168	gradient = sa_vertical_gradient(i) / 100.0
1169	sa_vertical_gradient_level_ind(i) = k + 1
1170	i = i + 1
1171	ENDIF
1172	ENDIF
1173	IF ( gradient /= 0.0 ) THEN
1174	IF ( k /= nzt ) THEN
1175	sa_init(k) = sa_init(k+1) - dzu(k+1) * gradient
1176	ELSE
1177	sa_init(k) = sa_surface - 0.5 * dzu(k+1) * gradient
1178	sa_init(k+1) = sa_surface + 0.5 * dzu(k+1) * gradient
1179	ENDIF
1180	ELSE
1181	sa_init(k) = sa_init(k+1)
1182	ENDIF
1183	ENDDO
1184
1185	ENDIF
1186
1187	!
1188	!-- If required compute the profile of leaf area density used in the plant
1189	!-- canopy model
1190	IF ( plant_canopy ) THEN
1191
1192	i = 1
1193	gradient = 0.0
1194
1195	IF ( .NOT. ocean ) THEN
1196
1197	lad(0) = lad_surface
1198
1199	lad_vertical_gradient_level_ind(1) = 0
1200	DO k = 1, pch_index
1201	IF ( i < 11 ) THEN
1202	IF ( lad_vertical_gradient_level(i) < zu(k) .AND. &
1203	lad_vertical_gradient_level(i) >= 0.0 ) THEN
1204	gradient = lad_vertical_gradient(i)
1205	lad_vertical_gradient_level_ind(i) = k - 1
1206	i = i + 1
1207	ENDIF
1208	ENDIF
1209	IF ( gradient /= 0.0 ) THEN
1210	IF ( k /= 1 ) THEN
1211	lad(k) = lad(k-1) + dzu(k) * gradient
1212	ELSE
1213	lad(k) = lad_surface + 0.5 * dzu(k) *gradient
1214	ENDIF
1215	ELSE
1216	lad(k) = lad(k-1)
1217	ENDIF
1218	ENDDO
1219
1220	ENDIF
1221
1222	!
1223	!-- In case of no given leaf area density gradients, choose a vanishing
1224	!-- gradient
1225	IF ( lad_vertical_gradient_level(1) == -9999999.9 ) THEN
1226	lad_vertical_gradient_level(1) = 0.0
1227	ENDIF
1228
1229	ENDIF
1230
1231	ENDIF
1232
1233	!
1234	!-- Initialize large scale subsidence if required
1235	IF ( subs_vertical_gradient_level(1) /= -9999999.9 ) THEN
1236	large_scale_subsidence = .TRUE.
1237	CALL init_w_subsidence
1238	END IF
1239
1240
1241
1242	!
1243	!-- Compute Coriolis parameter
1244	f = 2.0 * omega * SIN( phi / 180.0 * pi )
1245	fs = 2.0 * omega * COS( phi / 180.0 * pi )
1246
1247	!
1248	!-- Ocean runs always use reference values in the buoyancy term. Therefore
1249	!-- set the reference temperature equal to the surface temperature.
1250	IF ( ocean .AND. pt_reference == 9999999.9 ) pt_reference = pt_surface
1251
1252	!
1253	!-- Reference value has to be used in buoyancy terms
1254	IF ( pt_reference /= 9999999.9 ) use_reference = .TRUE.
1255
1256	!
1257	!-- Sign of buoyancy/stability terms
1258	IF ( ocean ) atmos_ocean_sign = -1.0
1259
1260	!
1261	!-- Ocean version must use flux boundary conditions at the top
1262	IF ( ocean .AND. .NOT. use_top_fluxes ) THEN
1263	message_string = 'use_top_fluxes must be .TRUE. in ocean version'
1264	CALL message( 'check_parameters', 'PA0042', 1, 2, 0, 6, 0 )
1265	ENDIF
1266
1267	!
1268	!-- In case of a given slope, compute the relevant quantities
1269	IF ( alpha_surface /= 0.0 ) THEN
1270	IF ( ABS( alpha_surface ) > 90.0 ) THEN
1271	WRITE( message_string, * ) 'ABS( alpha_surface = ', alpha_surface, &
1272	' ) must be < 90.0'
1273	CALL message( 'check_parameters', 'PA0043', 1, 2, 0, 6, 0 )
1274	ENDIF
1275	sloping_surface = .TRUE.
1276	cos_alpha_surface = COS( alpha_surface / 180.0 * pi )
1277	sin_alpha_surface = SIN( alpha_surface / 180.0 * pi )
1278	ENDIF
1279
1280	!
1281	!-- Check time step and cfl_factor
1282	IF ( dt /= -1.0 ) THEN
1283	IF ( dt <= 0.0 .AND. dt /= -1.0 ) THEN
1284	WRITE( message_string, * ) 'dt = ', dt , ' <= 0.0'
1285	CALL message( 'check_parameters', 'PA0044', 1, 2, 0, 6, 0 )
1286	ENDIF
1287	dt_3d = dt
1288	dt_fixed = .TRUE.
1289	ENDIF
1290
1291	IF ( cfl_factor <= 0.0 .OR. cfl_factor > 1.0 ) THEN
1292	IF ( cfl_factor == -1.0 ) THEN
1293	IF ( momentum_advec == 'ups-scheme' .OR. &
1294	scalar_advec == 'ups-scheme' ) THEN
1295	cfl_factor = 0.8
1296	ELSE
1297	IF ( timestep_scheme == 'runge-kutta-2' ) THEN
1298	cfl_factor = 0.8
1299	ELSEIF ( timestep_scheme == 'runge-kutta-3' ) THEN
1300	cfl_factor = 0.9
1301	ELSE
1302	cfl_factor = 0.1
1303	ENDIF
1304	ENDIF
1305	ELSE
1306	WRITE( message_string, * ) 'cfl_factor = ', cfl_factor, &
1307	' out of range & 0.0 < cfl_factor <= 1.0 is required'
1308	CALL message( 'check_parameters', 'PA0045', 1, 2, 0, 6, 0 )
1309	ENDIF
1310	ENDIF
1311
1312	!
1313	!-- Store simulated time at begin
1314	simulated_time_at_begin = simulated_time
1315
1316	!
1317	!-- Store reference time for coupled runs and change the coupling flag,
1318	!-- if ...
1319	IF ( simulated_time == 0.0 ) THEN
1320	IF ( coupling_start_time == 0.0 ) THEN
1321	time_since_reference_point = 0.0
1322	ELSEIF ( time_since_reference_point < 0.0 ) THEN
1323	run_coupled = .FALSE.
1324	ENDIF
1325	ENDIF
1326
1327	!
1328	!-- Set wind speed in the Galilei-transformed system
1329	IF ( galilei_transformation ) THEN
1330	IF ( use_ug_for_galilei_tr .AND. &
1331	ug_vertical_gradient_level(1) == 0.0 .AND. &
1332	vg_vertical_gradient_level(1) == 0.0 ) THEN
1333	u_gtrans = ug_surface
1334	v_gtrans = vg_surface
1335	ELSEIF ( use_ug_for_galilei_tr .AND. &
1336	ug_vertical_gradient_level(1) /= 0.0 ) THEN
1337	message_string = 'baroclinicity (ug) not allowed simultaneously' // &
1338	' with galilei transformation'
1339	CALL message( 'check_parameters', 'PA0046', 1, 2, 0, 6, 0 )
1340	ELSEIF ( use_ug_for_galilei_tr .AND. &
1341	vg_vertical_gradient_level(1) /= 0.0 ) THEN
1342	message_string = 'baroclinicity (vg) not allowed simultaneously' // &
1343	' with galilei transformation'
1344	CALL message( 'check_parameters', 'PA0047', 1, 2, 0, 6, 0 )
1345	ELSE
1346	message_string = 'variable translation speed used for galilei-' // &
1347	'transformation, which may cause & instabilities in stably ' // &
1348	'stratified regions'
1349	CALL message( 'check_parameters', 'PA0048', 0, 1, 0, 6, 0 )
1350	ENDIF
1351	ENDIF
1352
1353	!
1354	!-- In case of using a prandtl-layer, calculated (or prescribed) surface
1355	!-- fluxes have to be used in the diffusion-terms
1356	IF ( prandtl_layer ) use_surface_fluxes = .TRUE.
1357
1358	!
1359	!-- Check boundary conditions and set internal variables:
1360	!-- Lateral boundary conditions
1361	IF ( bc_lr /= 'cyclic' .AND. bc_lr /= 'dirichlet/radiation' .AND. &
1362	bc_lr /= 'radiation/dirichlet' ) THEN
1363	message_string = 'unknown boundary condition: bc_lr = "' // &
1364	TRIM( bc_lr ) // '"'
1365	CALL message( 'check_parameters', 'PA0049', 1, 2, 0, 6, 0 )
1366	ENDIF
1367	IF ( bc_ns /= 'cyclic' .AND. bc_ns /= 'dirichlet/radiation' .AND. &
1368	bc_ns /= 'radiation/dirichlet' ) THEN
1369	message_string = 'unknown boundary condition: bc_ns = "' // &
1370	TRIM( bc_ns ) // '"'
1371	CALL message( 'check_parameters', 'PA0050', 1, 2, 0, 6, 0 )
1372	ENDIF
1373
1374	!
1375	!-- Internal variables used for speed optimization in if clauses
1376	IF ( bc_lr /= 'cyclic' ) bc_lr_cyc = .FALSE.
1377	IF ( bc_lr == 'dirichlet/radiation' ) bc_lr_dirrad = .TRUE.
1378	IF ( bc_lr == 'radiation/dirichlet' ) bc_lr_raddir = .TRUE.
1379	IF ( bc_ns /= 'cyclic' ) bc_ns_cyc = .FALSE.
1380	IF ( bc_ns == 'dirichlet/radiation' ) bc_ns_dirrad = .TRUE.
1381	IF ( bc_ns == 'radiation/dirichlet' ) bc_ns_raddir = .TRUE.
1382
1383	!
1384	!-- Non-cyclic lateral boundaries require the multigrid method and Piascek-
1385	!-- Willimas or Wicker - Skamarock advection scheme. Several schemes
1386	!-- and tools do not work with non-cyclic boundary conditions.
1387	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
1388	IF ( psolver /= 'multigrid' ) THEN
1389	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1390	'psolver = "' // TRIM( psolver ) // '"'
1391	CALL message( 'check_parameters', 'PA0051', 1, 2, 0, 6, 0 )
1392	ENDIF
1393	IF ( momentum_advec /= 'pw-scheme' .AND. &
1394	momentum_advec /= 'ws-scheme') THEN
1395	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1396	'momentum_advec = "' // TRIM( momentum_advec ) // '"'
1397	CALL message( 'check_parameters', 'PA0052', 1, 2, 0, 6, 0 )
1398	ENDIF
1399	IF ( scalar_advec /= 'pw-scheme' .AND. &
1400	scalar_advec /= 'ws-scheme' ) THEN
1401	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1402	'scalar_advec = "' // TRIM( scalar_advec ) // '"'
1403	CALL message( 'check_parameters', 'PA0053', 1, 2, 0, 6, 0 )
1404	ENDIF
1405	IF ( (scalar_advec == 'ws-scheme' .OR. momentum_advec == 'ws-scheme' ) &
1406	.AND. loop_optimization == 'vector' ) THEN
1407	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1408	'loop_optimization = vector and ' // &
1409	'scalar_advec = "' // TRIM( scalar_advec ) // '"'
1410	! The error message number still needs modification.
1411	CALL message( 'check_parameters', 'PA0342', 1, 2, 0, 6, 0 )
1412	END IF
1413	IF ( galilei_transformation ) THEN
1414	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1415	'galilei_transformation = .T.'
1416	CALL message( 'check_parameters', 'PA0054', 1, 2, 0, 6, 0 )
1417	ENDIF
1418	ENDIF
1419
1420	!
1421	!-- Bottom boundary condition for the turbulent Kinetic energy
1422	IF ( bc_e_b == 'neumann' ) THEN
1423	ibc_e_b = 1
1424	IF ( adjust_mixing_length .AND. prandtl_layer ) THEN
1425	message_string = 'adjust_mixing_length = TRUE and bc_e_b = "neumann"'
1426	CALL message( 'check_parameters', 'PA0055', 0, 1, 0, 6, 0 )
1427	ENDIF
1428	ELSEIF ( bc_e_b == '(u)*2+neumann' ) THEN
1429	ibc_e_b = 2
1430	IF ( .NOT. adjust_mixing_length .AND. prandtl_layer ) THEN
1431	message_string = 'adjust_mixing_length = FALSE and bc_e_b = "' // &
1432	TRIM( bc_e_b ) // '"'
1433	CALL message( 'check_parameters', 'PA0056', 0, 1, 0, 6, 0 )
1434	ENDIF
1435	IF ( .NOT. prandtl_layer ) THEN
1436	bc_e_b = 'neumann'
1437	ibc_e_b = 1
1438	message_string = 'boundary condition bc_e_b changed to "' // &
1439	TRIM( bc_e_b ) // '"'
1440	CALL message( 'check_parameters', 'PA0057', 0, 1, 0, 6, 0 )
1441	ENDIF
1442	ELSE
1443	message_string = 'unknown boundary condition: bc_e_b = "' // &
1444	TRIM( bc_e_b ) // '"'
1445	CALL message( 'check_parameters', 'PA0058', 1, 2, 0, 6, 0 )
1446	ENDIF
1447
1448	!
1449	!-- Boundary conditions for perturbation pressure
1450	IF ( bc_p_b == 'dirichlet' ) THEN
1451	ibc_p_b = 0
1452	ELSEIF ( bc_p_b == 'neumann' ) THEN
1453	ibc_p_b = 1
1454	ELSEIF ( bc_p_b == 'neumann+inhomo' ) THEN
1455	ibc_p_b = 2
1456	ELSE
1457	message_string = 'unknown boundary condition: bc_p_b = "' // &
1458	TRIM( bc_p_b ) // '"'
1459	CALL message( 'check_parameters', 'PA0059', 1, 2, 0, 6, 0 )
1460	ENDIF
1461	IF ( ibc_p_b == 2 .AND. .NOT. prandtl_layer ) THEN
1462	message_string = 'boundary condition: bc_p_b = "' // TRIM( bc_p_b ) // &
1463	'" not allowed with prandtl_layer = .FALSE.'
1464	CALL message( 'check_parameters', 'PA0060', 1, 2, 0, 6, 0 )
1465	ENDIF
1466	IF ( bc_p_t == 'dirichlet' ) THEN
1467	ibc_p_t = 0
1468	ELSEIF ( bc_p_t == 'neumann' ) THEN
1469	ibc_p_t = 1
1470	ELSE
1471	message_string = 'unknown boundary condition: bc_p_t = "' // &
1472	TRIM( bc_p_t ) // '"'
1473	CALL message( 'check_parameters', 'PA0061', 1, 2, 0, 6, 0 )
1474	ENDIF
1475
1476	!
1477	!-- Boundary conditions for potential temperature
1478	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
1479	ibc_pt_b = 2
1480	ELSE
1481	IF ( bc_pt_b == 'dirichlet' ) THEN
1482	ibc_pt_b = 0
1483	ELSEIF ( bc_pt_b == 'neumann' ) THEN
1484	ibc_pt_b = 1
1485	ELSE
1486	message_string = 'unknown boundary condition: bc_pt_b = "' // &
1487	TRIM( bc_pt_b ) // '"'
1488	CALL message( 'check_parameters', 'PA0062', 1, 2, 0, 6, 0 )
1489	ENDIF
1490	ENDIF
1491
1492	IF ( bc_pt_t == 'dirichlet' ) THEN
1493	ibc_pt_t = 0
1494	ELSEIF ( bc_pt_t == 'neumann' ) THEN
1495	ibc_pt_t = 1
1496	ELSEIF ( bc_pt_t == 'initial_gradient' ) THEN
1497	ibc_pt_t = 2
1498	ELSE
1499	message_string = 'unknown boundary condition: bc_pt_t = "' // &
1500	TRIM( bc_pt_t ) // '"'
1501	CALL message( 'check_parameters', 'PA0063', 1, 2, 0, 6, 0 )
1502	ENDIF
1503
1504	IF ( surface_heatflux == 9999999.9 ) constant_heatflux = .FALSE.
1505	IF ( top_heatflux == 9999999.9 ) constant_top_heatflux = .FALSE.
1506	IF ( top_momentumflux_u /= 9999999.9 .AND. &
1507	top_momentumflux_v /= 9999999.9 ) THEN
1508	constant_top_momentumflux = .TRUE.
1509	ELSEIF ( .NOT. ( top_momentumflux_u == 9999999.9 .AND. &
1510	top_momentumflux_v == 9999999.9 ) ) THEN
1511	message_string = 'both, top_momentumflux_u AND top_momentumflux_v ' // &
1512	'must be set'
1513	CALL message( 'check_parameters', 'PA0064', 1, 2, 0, 6, 0 )
1514	ENDIF
1515
1516	!
1517	!-- A given surface temperature implies Dirichlet boundary condition for
1518	!-- temperature. In this case specification of a constant heat flux is
1519	!-- forbidden.
1520	IF ( ibc_pt_b == 0 .AND. constant_heatflux .AND. &
1521	surface_heatflux /= 0.0 ) THEN
1522	message_string = 'boundary_condition: bc_pt_b = "' // TRIM( bc_pt_b ) //&
1523	'& is not allowed with constant_heatflux = .TRUE.'
1524	CALL message( 'check_parameters', 'PA0065', 1, 2, 0, 6, 0 )
1525	ENDIF
1526	IF ( constant_heatflux .AND. pt_surface_initial_change /= 0.0 ) THEN
1527	WRITE ( message_string, * ) 'constant_heatflux = .TRUE. is not allo', &
1528	'wed with pt_surface_initial_change (/=0) = ', &
1529	pt_surface_initial_change
1530	CALL message( 'check_parameters', 'PA0066', 1, 2, 0, 6, 0 )
1531	ENDIF
1532
1533	!
1534	!-- A given temperature at the top implies Dirichlet boundary condition for
1535	!-- temperature. In this case specification of a constant heat flux is
1536	!-- forbidden.
1537	IF ( ibc_pt_t == 0 .AND. constant_top_heatflux .AND. &
1538	top_heatflux /= 0.0 ) THEN
1539	message_string = 'boundary_condition: bc_pt_t = "' // TRIM( bc_pt_t ) //&
1540	'" is not allowed with constant_top_heatflux = .TRUE.'
1541	CALL message( 'check_parameters', 'PA0067', 1, 2, 0, 6, 0 )
1542	ENDIF
1543
1544	!
1545	!-- Boundary conditions for salinity
1546	IF ( ocean ) THEN
1547	IF ( bc_sa_t == 'dirichlet' ) THEN
1548	ibc_sa_t = 0
1549	ELSEIF ( bc_sa_t == 'neumann' ) THEN
1550	ibc_sa_t = 1
1551	ELSE
1552	message_string = 'unknown boundary condition: bc_sa_t = "' // &
1553	TRIM( bc_sa_t ) // '"'
1554	CALL message( 'check_parameters', 'PA0068', 1, 2, 0, 6, 0 )
1555	ENDIF
1556
1557	IF ( top_salinityflux == 9999999.9 ) constant_top_salinityflux = .FALSE.
1558	IF ( ibc_sa_t == 1 .AND. top_salinityflux == 9999999.9 ) THEN
1559	message_string = 'boundary condition: bc_sa_t = "' // &
1560	TRIM( bc_sa_t ) // '" requires to set ' // &
1561	'top_salinityflux'
1562	CALL message( 'check_parameters', 'PA0069', 1, 2, 0, 6, 0 )
1563	ENDIF
1564
1565	!
1566	!-- A fixed salinity at the top implies Dirichlet boundary condition for
1567	!-- salinity. In this case specification of a constant salinity flux is
1568	!-- forbidden.
1569	IF ( ibc_sa_t == 0 .AND. constant_top_salinityflux .AND. &
1570	top_salinityflux /= 0.0 ) THEN
1571	message_string = 'boundary condition: bc_sa_t = "' // &
1572	TRIM( bc_sa_t ) // '" is not allowed with ' // &
1573	'constant_top_salinityflux = .TRUE.'
1574	CALL message( 'check_parameters', 'PA0070', 1, 2, 0, 6, 0 )
1575	ENDIF
1576
1577	ENDIF
1578
1579	!
1580	!-- In case of humidity or passive scalar, set boundary conditions for total
1581	!-- water content / scalar
1582	IF ( humidity .OR. passive_scalar ) THEN
1583	IF ( humidity ) THEN
1584	sq = 'q'
1585	ELSE
1586	sq = 's'
1587	ENDIF
1588	IF ( bc_q_b == 'dirichlet' ) THEN
1589	ibc_q_b = 0
1590	ELSEIF ( bc_q_b == 'neumann' ) THEN
1591	ibc_q_b = 1
1592	ELSE
1593	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
1594	'_b ="' // TRIM( bc_q_b ) // '"'
1595	CALL message( 'check_parameters', 'PA0071', 1, 2, 0, 6, 0 )
1596	ENDIF
1597	IF ( bc_q_t == 'dirichlet' ) THEN
1598	ibc_q_t = 0
1599	ELSEIF ( bc_q_t == 'neumann' ) THEN
1600	ibc_q_t = 1
1601	ELSE
1602	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
1603	'_t ="' // TRIM( bc_q_t ) // '"'
1604	CALL message( 'check_parameters', 'PA0072', 1, 2, 0, 6, 0 )
1605	ENDIF
1606
1607	IF ( surface_waterflux == 9999999.9 ) constant_waterflux = .FALSE.
1608
1609	!
1610	!-- A given surface humidity implies Dirichlet boundary condition for
1611	!-- humidity. In this case specification of a constant water flux is
1612	!-- forbidden.
1613	IF ( ibc_q_b == 0 .AND. constant_waterflux ) THEN
1614	message_string = 'boundary condition: bc_' // TRIM( sq ) // '_b ' // &
1615	'= "' // TRIM( bc_q_b ) // '" is not allowed wi' // &
1616	'th prescribed surface flux'
1617	CALL message( 'check_parameters', 'PA0073', 1, 2, 0, 6, 0 )
1618	ENDIF
1619	IF ( constant_waterflux .AND. q_surface_initial_change /= 0.0 ) THEN
1620	WRITE( message_string, * ) 'a prescribed surface flux is not allo', &
1621	'wed with ', sq, '_surface_initial_change (/=0) = ', &
1622	q_surface_initial_change
1623	CALL message( 'check_parameters', 'PA0074', 1, 2, 0, 6, 0 )
1624	ENDIF
1625
1626	ENDIF
1627
1628	!
1629	!-- Boundary conditions for horizontal components of wind speed
1630	IF ( bc_uv_b == 'dirichlet' ) THEN
1631	ibc_uv_b = 0
1632	ELSEIF ( bc_uv_b == 'neumann' ) THEN
1633	ibc_uv_b = 1
1634	IF ( prandtl_layer ) THEN
1635	message_string = 'boundary condition: bc_uv_b = "' // &
1636	TRIM( bc_uv_b ) // '" is not allowed with prandtl_layer = .TRUE.'
1637	CALL message( 'check_parameters', 'PA0075', 1, 2, 0, 6, 0 )
1638	ENDIF
1639	ELSE
1640	message_string = 'unknown boundary condition: bc_uv_b = "' // &
1641	TRIM( bc_uv_b ) // '"'
1642	CALL message( 'check_parameters', 'PA0076', 1, 2, 0, 6, 0 )
1643	ENDIF
1644	!
1645	!-- In case of coupled simulations u and v at the ground in atmosphere will be
1646	!-- assigned with the u and v values of the ocean surface
1647	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
1648	ibc_uv_b = 2
1649	ENDIF
1650
1651	IF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
1652	bc_uv_t = 'neumann'
1653	ibc_uv_t = 1
1654	ELSE
1655	IF ( bc_uv_t == 'dirichlet' .OR. bc_uv_t == 'dirichlet_0' ) THEN
1656	ibc_uv_t = 0
1657	IF ( bc_uv_t == 'dirichlet_0' ) THEN
1658	!
1659	!-- Velocities for the initial u,v-profiles are set zero at the top
1660	!-- in case of dirichlet_0 conditions
1661	u_init(nzt+1) = 0.0
1662	v_init(nzt+1) = 0.0
1663	ENDIF
1664	ELSEIF ( bc_uv_t == 'neumann' ) THEN
1665	ibc_uv_t = 1
1666	ELSE
1667	message_string = 'unknown boundary condition: bc_uv_t = "' // &
1668	TRIM( bc_uv_t ) // '"'
1669	CALL message( 'check_parameters', 'PA0077', 1, 2, 0, 6, 0 )
1670	ENDIF
1671	ENDIF
1672
1673	!
1674	!-- Compute and check, respectively, the Rayleigh Damping parameter
1675	IF ( rayleigh_damping_factor == -1.0 ) THEN
1676	IF ( momentum_advec == 'ups-scheme' ) THEN
1677	rayleigh_damping_factor = 0.01
1678	ELSE
1679	rayleigh_damping_factor = 0.0
1680	ENDIF
1681	ELSE
1682	IF ( rayleigh_damping_factor < 0.0 .OR. rayleigh_damping_factor > 1.0 ) &
1683	THEN
1684	WRITE( message_string, * ) 'rayleigh_damping_factor = ', &
1685	rayleigh_damping_factor, ' out of range [0.0,1.0]'
1686	CALL message( 'check_parameters', 'PA0078', 1, 2, 0, 6, 0 )
1687	ENDIF
1688	ENDIF
1689
1690	IF ( rayleigh_damping_height == -1.0 ) THEN
1691	IF ( .NOT. ocean ) THEN
1692	rayleigh_damping_height = 0.66666666666 * zu(nzt)
1693	ELSE
1694	rayleigh_damping_height = 0.66666666666 * zu(nzb)
1695	ENDIF
1696	ELSE
1697	IF ( .NOT. ocean ) THEN
1698	IF ( rayleigh_damping_height < 0.0 .OR. &
1699	rayleigh_damping_height > zu(nzt) ) THEN
1700	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
1701	rayleigh_damping_height, ' out of range [0.0,', zu(nzt), ']'
1702	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
1703	ENDIF
1704	ELSE
1705	IF ( rayleigh_damping_height > 0.0 .OR. &
1706	rayleigh_damping_height < zu(nzb) ) THEN
1707	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
1708	rayleigh_damping_height, ' out of range [0.0,', zu(nzb), ']'
1709	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
1710	ENDIF
1711	ENDIF
1712	ENDIF
1713
1714	!
1715	!-- Check limiters for Upstream-Spline scheme
1716	IF ( overshoot_limit_u < 0.0 .OR. overshoot_limit_v < 0.0 .OR. &
1717	overshoot_limit_w < 0.0 .OR. overshoot_limit_pt < 0.0 .OR. &
1718	overshoot_limit_e < 0.0 ) THEN
1719	message_string = 'overshoot_limit_... < 0.0 is not allowed'
1720	CALL message( 'check_parameters', 'PA0080', 1, 2, 0, 6, 0 )
1721	ENDIF
1722	IF ( ups_limit_u < 0.0 .OR. ups_limit_v < 0.0 .OR. ups_limit_w < 0.0 .OR. &
1723	ups_limit_pt < 0.0 .OR. ups_limit_e < 0.0 ) THEN
1724	message_string = 'ups_limit_... < 0.0 is not allowed'
1725	CALL message( 'check_parameters', 'PA0081', 1, 2, 0, 6, 0 )
1726	ENDIF
1727
1728	!
1729	!-- Check number of chosen statistic regions. More than 10 regions are not
1730	!-- allowed, because so far no more than 10 corresponding output files can
1731	!-- be opened (cf. check_open)
1732	IF ( statistic_regions > 9 .OR. statistic_regions < 0 ) THEN
1733	WRITE ( message_string, * ) 'number of statistic_regions = ', &
1734	statistic_regions+1, ' but only 10 regions are allowed'
1735	CALL message( 'check_parameters', 'PA0082', 1, 2, 0, 6, 0 )
1736	ENDIF
1737	IF ( normalizing_region > statistic_regions .OR. &
1738	normalizing_region < 0) THEN
1739	WRITE ( message_string, * ) 'normalizing_region = ', &
1740	normalizing_region, ' must be >= 0 and <= ',statistic_regions, &
1741	' (value of statistic_regions)'
1742	CALL message( 'check_parameters', 'PA0083', 1, 2, 0, 6, 0 )
1743	ENDIF
1744
1745	!
1746	!-- Check the interval for sorting particles.
1747	!-- Using particles as cloud droplets requires sorting after each timestep.
1748	IF ( dt_sort_particles /= 0.0 .AND. cloud_droplets ) THEN
1749	dt_sort_particles = 0.0
1750	message_string = 'dt_sort_particles is reset to 0.0 because of cloud' //&
1751	'_droplets = .TRUE.'
1752	CALL message( 'check_parameters', 'PA0084', 0, 1, 0, 6, 0 )
1753	ENDIF
1754
1755	!
1756	!-- Set the default intervals for data output, if necessary
1757	!-- NOTE: dt_dosp has already been set in package_parin
1758	IF ( dt_data_output /= 9999999.9 ) THEN
1759	IF ( dt_dopr == 9999999.9 ) dt_dopr = dt_data_output
1760	IF ( dt_dopts == 9999999.9 ) dt_dopts = dt_data_output
1761	IF ( dt_do2d_xy == 9999999.9 ) dt_do2d_xy = dt_data_output
1762	IF ( dt_do2d_xz == 9999999.9 ) dt_do2d_xz = dt_data_output
1763	IF ( dt_do2d_yz == 9999999.9 ) dt_do2d_yz = dt_data_output
1764	IF ( dt_do3d == 9999999.9 ) dt_do3d = dt_data_output
1765	IF ( dt_data_output_av == 9999999.9 ) dt_data_output_av = dt_data_output
1766	DO mid = 1, max_masks
1767	IF ( dt_domask(mid) == 9999999.9 ) dt_domask(mid) = dt_data_output
1768	ENDDO
1769	ENDIF
1770
1771	!
1772	!-- Set the default skip time intervals for data output, if necessary
1773	IF ( skip_time_dopr == 9999999.9 ) &
1774	skip_time_dopr = skip_time_data_output
1775	IF ( skip_time_dosp == 9999999.9 ) &
1776	skip_time_dosp = skip_time_data_output
1777	IF ( skip_time_do2d_xy == 9999999.9 ) &
1778	skip_time_do2d_xy = skip_time_data_output
1779	IF ( skip_time_do2d_xz == 9999999.9 ) &
1780	skip_time_do2d_xz = skip_time_data_output
1781	IF ( skip_time_do2d_yz == 9999999.9 ) &
1782	skip_time_do2d_yz = skip_time_data_output
1783	IF ( skip_time_do3d == 9999999.9 ) &
1784	skip_time_do3d = skip_time_data_output
1785	IF ( skip_time_data_output_av == 9999999.9 ) &
1786	skip_time_data_output_av = skip_time_data_output
1787	DO mid = 1, max_masks
1788	IF ( skip_time_domask(mid) == 9999999.9 ) &
1789	skip_time_domask(mid) = skip_time_data_output
1790	ENDDO
1791
1792	!
1793	!-- Check the average intervals (first for 3d-data, then for profiles and
1794	!-- spectra)
1795	IF ( averaging_interval > dt_data_output_av ) THEN
1796	WRITE( message_string, * ) 'averaging_interval = ', &
1797	averaging_interval, ' must be <= dt_data_output = ', dt_data_output
1798	CALL message( 'check_parameters', 'PA0085', 1, 2, 0, 6, 0 )
1799	ENDIF
1800
1801	IF ( averaging_interval_pr == 9999999.9 ) THEN
1802	averaging_interval_pr = averaging_interval
1803	ENDIF
1804
1805	IF ( averaging_interval_pr > dt_dopr ) THEN
1806	WRITE( message_string, * ) 'averaging_interval_pr = ', &
1807	averaging_interval_pr, ' must be <= dt_dopr = ', dt_dopr
1808	CALL message( 'check_parameters', 'PA0086', 1, 2, 0, 6, 0 )
1809	ENDIF
1810
1811	IF ( averaging_interval_sp == 9999999.9 ) THEN
1812	averaging_interval_sp = averaging_interval
1813	ENDIF
1814
1815	IF ( averaging_interval_sp > dt_dosp ) THEN
1816	WRITE( message_string, * ) 'averaging_interval_sp = ', &
1817	averaging_interval_sp, ' must be <= dt_dosp = ', dt_dosp
1818	CALL message( 'check_parameters', 'PA0087', 1, 2, 0, 6, 0 )
1819	ENDIF
1820
1821	!
1822	!-- Set the default interval for profiles entering the temporal average
1823	IF ( dt_averaging_input_pr == 9999999.9 ) THEN
1824	dt_averaging_input_pr = dt_averaging_input
1825	ENDIF
1826
1827	!
1828	!-- Set the default interval for the output of timeseries to a reasonable
1829	!-- value (tries to minimize the number of calls of flow_statistics)
1830	IF ( dt_dots == 9999999.9 ) THEN
1831	IF ( averaging_interval_pr == 0.0 ) THEN
1832	dt_dots = MIN( dt_run_control, dt_dopr )
1833	ELSE
1834	dt_dots = MIN( dt_run_control, dt_averaging_input_pr )
1835	ENDIF
1836	ENDIF
1837
1838	!
1839	!-- Check the sample rate for averaging (first for 3d-data, then for profiles)
1840	IF ( dt_averaging_input > averaging_interval ) THEN
1841	WRITE( message_string, * ) 'dt_averaging_input = ', &
1842	dt_averaging_input, ' must be <= averaging_interval = ', &
1843	averaging_interval
1844	CALL message( 'check_parameters', 'PA0088', 1, 2, 0, 6, 0 )
1845	ENDIF
1846
1847	IF ( dt_averaging_input_pr > averaging_interval_pr ) THEN
1848	WRITE( message_string, * ) 'dt_averaging_input_pr = ', &
1849	dt_averaging_input_pr, ' must be <= averaging_interval_pr = ', &
1850	averaging_interval_pr
1851	CALL message( 'check_parameters', 'PA0089', 1, 2, 0, 6, 0 )
1852	ENDIF
1853
1854	!
1855	!-- Set the default value for the integration interval of precipitation amount
1856	IF ( precipitation ) THEN
1857	IF ( precipitation_amount_interval == 9999999.9 ) THEN
1858	precipitation_amount_interval = dt_do2d_xy
1859	ELSE
1860	IF ( precipitation_amount_interval > dt_do2d_xy ) THEN
1861	WRITE( message_string, * ) 'precipitation_amount_interval = ', &
1862	precipitation_amount_interval, ' must not be larger than ', &
1863	'dt_do2d_xy = ', dt_do2d_xy
1864	CALL message( 'check_parameters', 'PA0090', 1, 2, 0, 6, 0 )
1865	ENDIF
1866	ENDIF
1867	ENDIF
1868
1869	!
1870	!-- Determine the number of output profiles and check whether they are
1871	!-- permissible
1872	DO WHILE ( data_output_pr(dopr_n+1) /= ' ' )
1873
1874	dopr_n = dopr_n + 1
1875	i = dopr_n
1876
1877	!
1878	!-- Determine internal profile number (for hom, homs)
1879	!-- and store height levels
1880	SELECT CASE ( TRIM( data_output_pr(i) ) )
1881
1882	CASE ( 'u', '#u' )
1883	dopr_index(i) = 1
1884	dopr_unit(i) = 'm/s'
1885	hom(:,2,1,:) = SPREAD( zu, 2, statistic_regions+1 )
1886	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1887	dopr_initial_index(i) = 5
1888	hom(:,2,5,:) = SPREAD( zu, 2, statistic_regions+1 )
1889	data_output_pr(i) = data_output_pr(i)(2:)
1890	ENDIF
1891
1892	CASE ( 'v', '#v' )
1893	dopr_index(i) = 2
1894	dopr_unit(i) = 'm/s'
1895	hom(:,2,2,:) = SPREAD( zu, 2, statistic_regions+1 )
1896	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1897	dopr_initial_index(i) = 6
1898	hom(:,2,6,:) = SPREAD( zu, 2, statistic_regions+1 )
1899	data_output_pr(i) = data_output_pr(i)(2:)
1900	ENDIF
1901
1902	CASE ( 'w' )
1903	dopr_index(i) = 3
1904	dopr_unit(i) = 'm/s'
1905	hom(:,2,3,:) = SPREAD( zw, 2, statistic_regions+1 )
1906
1907	CASE ( 'pt', '#pt' )
1908	IF ( .NOT. cloud_physics ) THEN
1909	dopr_index(i) = 4
1910	dopr_unit(i) = 'K'
1911	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
1912	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1913	dopr_initial_index(i) = 7
1914	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
1915	hom(nzb,2,7,:) = 0.0 ! because zu(nzb) is negative
1916	data_output_pr(i) = data_output_pr(i)(2:)
1917	ENDIF
1918	ELSE
1919	dopr_index(i) = 43
1920	dopr_unit(i) = 'K'
1921	hom(:,2,43,:) = SPREAD( zu, 2, statistic_regions+1 )
1922	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1923	dopr_initial_index(i) = 28
1924	hom(:,2,28,:) = SPREAD( zu, 2, statistic_regions+1 )
1925	hom(nzb,2,28,:) = 0.0 ! because zu(nzb) is negative
1926	data_output_pr(i) = data_output_pr(i)(2:)
1927	ENDIF
1928	ENDIF
1929
1930	CASE ( 'e' )
1931	dopr_index(i) = 8
1932	dopr_unit(i) = 'm2/s2'
1933	hom(:,2,8,:) = SPREAD( zu, 2, statistic_regions+1 )
1934	hom(nzb,2,8,:) = 0.0
1935
1936	CASE ( 'km', '#km' )
1937	dopr_index(i) = 9
1938	dopr_unit(i) = 'm2/s'
1939	hom(:,2,9,:) = SPREAD( zu, 2, statistic_regions+1 )
1940	hom(nzb,2,9,:) = 0.0
1941	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1942	dopr_initial_index(i) = 23
1943	hom(:,2,23,:) = hom(:,2,9,:)
1944	data_output_pr(i) = data_output_pr(i)(2:)
1945	ENDIF
1946
1947	CASE ( 'kh', '#kh' )
1948	dopr_index(i) = 10
1949	dopr_unit(i) = 'm2/s'
1950	hom(:,2,10,:) = SPREAD( zu, 2, statistic_regions+1 )
1951	hom(nzb,2,10,:) = 0.0
1952	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1953	dopr_initial_index(i) = 24
1954	hom(:,2,24,:) = hom(:,2,10,:)
1955	data_output_pr(i) = data_output_pr(i)(2:)
1956	ENDIF
1957
1958	CASE ( 'l', '#l' )
1959	dopr_index(i) = 11
1960	dopr_unit(i) = 'm'
1961	hom(:,2,11,:) = SPREAD( zu, 2, statistic_regions+1 )
1962	hom(nzb,2,11,:) = 0.0
1963	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1964	dopr_initial_index(i) = 25
1965	hom(:,2,25,:) = hom(:,2,11,:)
1966	data_output_pr(i) = data_output_pr(i)(2:)
1967	ENDIF
1968
1969	CASE ( 'w"u"' )
1970	dopr_index(i) = 12
1971	dopr_unit(i) = 'm2/s2'
1972	hom(:,2,12,:) = SPREAD( zw, 2, statistic_regions+1 )
1973	IF ( prandtl_layer ) hom(nzb,2,12,:) = zu(1)
1974
1975	CASE ( 'wu' )
1976	dopr_index(i) = 13
1977	dopr_unit(i) = 'm2/s2'
1978	hom(:,2,13,:) = SPREAD( zw, 2, statistic_regions+1 )
1979
1980	CASE ( 'w"v"' )
1981	dopr_index(i) = 14
1982	dopr_unit(i) = 'm2/s2'
1983	hom(:,2,14,:) = SPREAD( zw, 2, statistic_regions+1 )
1984	IF ( prandtl_layer ) hom(nzb,2,14,:) = zu(1)
1985
1986	CASE ( 'wv' )
1987	dopr_index(i) = 15
1988	dopr_unit(i) = 'm2/s2'
1989	hom(:,2,15,:) = SPREAD( zw, 2, statistic_regions+1 )
1990
1991	CASE ( 'w"pt"' )
1992	dopr_index(i) = 16
1993	dopr_unit(i) = 'K m/s'
1994	hom(:,2,16,:) = SPREAD( zw, 2, statistic_regions+1 )
1995
1996	CASE ( 'wpt' )
1997	dopr_index(i) = 17
1998	dopr_unit(i) = 'K m/s'
1999	hom(:,2,17,:) = SPREAD( zw, 2, statistic_regions+1 )
2000
2001	CASE ( 'wpt' )
2002	dopr_index(i) = 18
2003	dopr_unit(i) = 'K m/s'
2004	hom(:,2,18,:) = SPREAD( zw, 2, statistic_regions+1 )
2005
2006	CASE ( 'wu' )
2007	dopr_index(i) = 19
2008	dopr_unit(i) = 'm2/s2'
2009	hom(:,2,19,:) = SPREAD( zw, 2, statistic_regions+1 )
2010	IF ( prandtl_layer ) hom(nzb,2,19,:) = zu(1)
2011
2012	CASE ( 'wv' )
2013	dopr_index(i) = 20
2014	dopr_unit(i) = 'm2/s2'
2015	hom(:,2,20,:) = SPREAD( zw, 2, statistic_regions+1 )
2016	IF ( prandtl_layer ) hom(nzb,2,20,:) = zu(1)
2017
2018	CASE ( 'wptBC' )
2019	dopr_index(i) = 21
2020	dopr_unit(i) = 'K m/s'
2021	hom(:,2,21,:) = SPREAD( zw, 2, statistic_regions+1 )
2022
2023	CASE ( 'wptBC' )
2024	dopr_index(i) = 22
2025	dopr_unit(i) = 'K m/s'
2026	hom(:,2,22,:) = SPREAD( zw, 2, statistic_regions+1 )
2027
2028	CASE ( 'sa', '#sa' )
2029	IF ( .NOT. ocean ) THEN
2030	message_string = 'data_output_pr = ' // &
2031	TRIM( data_output_pr(i) ) // ' is not imp' // &
2032	'lemented for ocean = .FALSE.'
2033	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2034	ELSE
2035	dopr_index(i) = 23
2036	dopr_unit(i) = 'psu'
2037	hom(:,2,23,:) = SPREAD( zu, 2, statistic_regions+1 )
2038	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2039	dopr_initial_index(i) = 26
2040	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2041	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
2042	data_output_pr(i) = data_output_pr(i)(2:)
2043	ENDIF
2044	ENDIF
2045
2046	CASE ( 'u*2' )
2047	dopr_index(i) = 30
2048	dopr_unit(i) = 'm2/s2'
2049	hom(:,2,30,:) = SPREAD( zu, 2, statistic_regions+1 )
2050
2051	CASE ( 'v*2' )
2052	dopr_index(i) = 31
2053	dopr_unit(i) = 'm2/s2'
2054	hom(:,2,31,:) = SPREAD( zu, 2, statistic_regions+1 )
2055
2056	CASE ( 'w*2' )
2057	dopr_index(i) = 32
2058	dopr_unit(i) = 'm2/s2'
2059	hom(:,2,32,:) = SPREAD( zw, 2, statistic_regions+1 )
2060
2061	CASE ( 'pt*2' )
2062	dopr_index(i) = 33
2063	dopr_unit(i) = 'K2'
2064	hom(:,2,33,:) = SPREAD( zu, 2, statistic_regions+1 )
2065
2066	CASE ( 'e*' )
2067	dopr_index(i) = 34
2068	dopr_unit(i) = 'm2/s2'
2069	hom(:,2,34,:) = SPREAD( zu, 2, statistic_regions+1 )
2070
2071	CASE ( 'w2pt' )
2072	dopr_index(i) = 35
2073	dopr_unit(i) = 'K m2/s2'
2074	hom(:,2,35,:) = SPREAD( zw, 2, statistic_regions+1 )
2075
2076	CASE ( 'wpt2' )
2077	dopr_index(i) = 36
2078	dopr_unit(i) = 'K2 m/s'
2079	hom(:,2,36,:) = SPREAD( zw, 2, statistic_regions+1 )
2080
2081	CASE ( 'we' )
2082	dopr_index(i) = 37
2083	dopr_unit(i) = 'm3/s3'
2084	hom(:,2,37,:) = SPREAD( zw, 2, statistic_regions+1 )
2085
2086	CASE ( 'w*3' )
2087	dopr_index(i) = 38
2088	dopr_unit(i) = 'm3/s3'
2089	hom(:,2,38,:) = SPREAD( zw, 2, statistic_regions+1 )
2090
2091	CASE ( 'Sw' )
2092	dopr_index(i) = 39
2093	dopr_unit(i) = 'none'
2094	hom(:,2,39,:) = SPREAD( zw, 2, statistic_regions+1 )
2095
2096	CASE ( 'p' )
2097	dopr_index(i) = 40
2098	dopr_unit(i) = 'Pa'
2099	hom(:,2,40,:) = SPREAD( zu, 2, statistic_regions+1 )
2100
2101	CASE ( 'q', '#q' )
2102	IF ( .NOT. humidity ) THEN
2103	message_string = 'data_output_pr = ' // &
2104	TRIM( data_output_pr(i) ) // ' is not imp' // &
2105	'lemented for humidity = .FALSE.'
2106	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2107	ELSE
2108	dopr_index(i) = 41
2109	dopr_unit(i) = 'kg/kg'
2110	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
2111	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2112	dopr_initial_index(i) = 26
2113	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2114	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
2115	data_output_pr(i) = data_output_pr(i)(2:)
2116	ENDIF
2117	ENDIF
2118
2119	CASE ( 's', '#s' )
2120	IF ( .NOT. passive_scalar ) THEN
2121	message_string = 'data_output_pr = ' // &
2122	TRIM( data_output_pr(i) ) // ' is not imp' // &
2123	'lemented for passive_scalar = .FALSE.'
2124	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2125	ELSE
2126	dopr_index(i) = 41
2127	dopr_unit(i) = 'kg/m3'
2128	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
2129	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2130	dopr_initial_index(i) = 26
2131	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2132	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
2133	data_output_pr(i) = data_output_pr(i)(2:)
2134	ENDIF
2135	ENDIF
2136
2137	CASE ( 'qv', '#qv' )
2138	IF ( .NOT. cloud_physics ) THEN
2139	dopr_index(i) = 41
2140	dopr_unit(i) = 'kg/kg'
2141	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
2142	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2143	dopr_initial_index(i) = 26
2144	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2145	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
2146	data_output_pr(i) = data_output_pr(i)(2:)
2147	ENDIF
2148	ELSE
2149	dopr_index(i) = 42
2150	dopr_unit(i) = 'kg/kg'
2151	hom(:,2,42,:) = SPREAD( zu, 2, statistic_regions+1 )
2152	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2153	dopr_initial_index(i) = 27
2154	hom(:,2,27,:) = SPREAD( zu, 2, statistic_regions+1 )
2155	hom(nzb,2,27,:) = 0.0 ! weil zu(nzb) negativ ist
2156	data_output_pr(i) = data_output_pr(i)(2:)
2157	ENDIF
2158	ENDIF
2159
2160	CASE ( 'lpt', '#lpt' )
2161	IF ( .NOT. cloud_physics ) THEN
2162	message_string = 'data_output_pr = ' // &
2163	TRIM( data_output_pr(i) ) // ' is not imp' // &
2164	'lemented for cloud_physics = .FALSE.'
2165	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2166	ELSE
2167	dopr_index(i) = 4
2168	dopr_unit(i) = 'K'
2169	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
2170	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2171	dopr_initial_index(i) = 7
2172	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
2173	hom(nzb,2,7,:) = 0.0 ! weil zu(nzb) negativ ist
2174	data_output_pr(i) = data_output_pr(i)(2:)
2175	ENDIF
2176	ENDIF
2177
2178	CASE ( 'vpt', '#vpt' )
2179	dopr_index(i) = 44
2180	dopr_unit(i) = 'K'
2181	hom(:,2,44,:) = SPREAD( zu, 2, statistic_regions+1 )
2182	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2183	dopr_initial_index(i) = 29
2184	hom(:,2,29,:) = SPREAD( zu, 2, statistic_regions+1 )
2185	hom(nzb,2,29,:) = 0.0 ! weil zu(nzb) negativ ist
2186	data_output_pr(i) = data_output_pr(i)(2:)
2187	ENDIF
2188
2189	CASE ( 'w"vpt"' )
2190	dopr_index(i) = 45
2191	dopr_unit(i) = 'K m/s'
2192	hom(:,2,45,:) = SPREAD( zw, 2, statistic_regions+1 )
2193
2194	CASE ( 'wvpt' )
2195	dopr_index(i) = 46
2196	dopr_unit(i) = 'K m/s'
2197	hom(:,2,46,:) = SPREAD( zw, 2, statistic_regions+1 )
2198
2199	CASE ( 'wvpt' )
2200	dopr_index(i) = 47
2201	dopr_unit(i) = 'K m/s'
2202	hom(:,2,47,:) = SPREAD( zw, 2, statistic_regions+1 )
2203
2204	CASE ( 'w"q"' )
2205	IF ( .NOT. humidity ) THEN
2206	message_string = 'data_output_pr = ' // &
2207	TRIM( data_output_pr(i) ) // ' is not imp' // &
2208	'lemented for humidity = .FALSE.'
2209	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2210	ELSE
2211	dopr_index(i) = 48
2212	dopr_unit(i) = 'kg/kg m/s'
2213	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2214	ENDIF
2215
2216	CASE ( 'wq' )
2217	IF ( .NOT. humidity ) THEN
2218	message_string = 'data_output_pr = ' // &
2219	TRIM( data_output_pr(i) ) // ' is not imp' // &
2220	'lemented for humidity = .FALSE.'
2221	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2222	ELSE
2223	dopr_index(i) = 49
2224	dopr_unit(i) = 'kg/kg m/s'
2225	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2226	ENDIF
2227
2228	CASE ( 'wq' )
2229	IF ( .NOT. humidity ) THEN
2230	message_string = 'data_output_pr = ' // &
2231	TRIM( data_output_pr(i) ) // ' is not imp' // &
2232	'lemented for humidity = .FALSE.'
2233	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2234	ELSE
2235	dopr_index(i) = 50
2236	dopr_unit(i) = 'kg/kg m/s'
2237	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2238	ENDIF
2239
2240	CASE ( 'w"s"' )
2241	IF ( .NOT. passive_scalar ) THEN
2242	message_string = 'data_output_pr = ' // &
2243	TRIM( data_output_pr(i) ) // ' is not imp' // &
2244	'lemented for passive_scalar = .FALSE.'
2245	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2246	ELSE
2247	dopr_index(i) = 48
2248	dopr_unit(i) = 'kg/m3 m/s'
2249	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2250	ENDIF
2251
2252	CASE ( 'ws' )
2253	IF ( .NOT. passive_scalar ) THEN
2254	message_string = 'data_output_pr = ' // &
2255	TRIM( data_output_pr(i) ) // ' is not imp' // &
2256	'lemented for passive_scalar = .FALSE.'
2257	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2258	ELSE
2259	dopr_index(i) = 49
2260	dopr_unit(i) = 'kg/m3 m/s'
2261	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2262	ENDIF
2263
2264	CASE ( 'ws' )
2265	IF ( .NOT. passive_scalar ) THEN
2266	message_string = 'data_output_pr = ' // &
2267	TRIM( data_output_pr(i) ) // ' is not imp' // &
2268	'lemented for passive_scalar = .FALSE.'
2269	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2270	ELSE
2271	dopr_index(i) = 50
2272	dopr_unit(i) = 'kg/m3 m/s'
2273	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2274	ENDIF
2275
2276	CASE ( 'w"qv"' )
2277	IF ( humidity .AND. .NOT. cloud_physics ) &
2278	THEN
2279	dopr_index(i) = 48
2280	dopr_unit(i) = 'kg/kg m/s'
2281	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2282	ELSEIF( humidity .AND. cloud_physics ) THEN
2283	dopr_index(i) = 51
2284	dopr_unit(i) = 'kg/kg m/s'
2285	hom(:,2,51,:) = SPREAD( zw, 2, statistic_regions+1 )
2286	ELSE
2287	message_string = 'data_output_pr = ' // &
2288	TRIM( data_output_pr(i) ) // ' is not imp' // &
2289	'lemented for cloud_physics = .FALSE. an&' // &
2290	'd humidity = .FALSE.'
2291	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2292	ENDIF
2293
2294	CASE ( 'wqv' )
2295	IF ( humidity .AND. .NOT. cloud_physics ) &
2296	THEN
2297	dopr_index(i) = 49
2298	dopr_unit(i) = 'kg/kg m/s'
2299	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2300	ELSEIF( humidity .AND. cloud_physics ) THEN
2301	dopr_index(i) = 52
2302	dopr_unit(i) = 'kg/kg m/s'
2303	hom(:,2,52,:) = SPREAD( zw, 2, statistic_regions+1 )
2304	ELSE
2305	message_string = 'data_output_pr = ' // &
2306	TRIM( data_output_pr(i) ) // ' is not imp' // &
2307	'lemented for cloud_physics = .FALSE. an&' // &
2308	'd humidity = .FALSE.'
2309	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2310	ENDIF
2311
2312	CASE ( 'wqv' )
2313	IF ( humidity .AND. .NOT. cloud_physics ) &
2314	THEN
2315	dopr_index(i) = 50
2316	dopr_unit(i) = 'kg/kg m/s'
2317	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2318	ELSEIF( humidity .AND. cloud_physics ) THEN
2319	dopr_index(i) = 53
2320	dopr_unit(i) = 'kg/kg m/s'
2321	hom(:,2,53,:) = SPREAD( zw, 2, statistic_regions+1 )
2322	ELSE
2323	message_string = 'data_output_pr = ' // &
2324	TRIM( data_output_pr(i) ) // ' is not imp' // &
2325	'lemented for cloud_physics = .FALSE. an&' // &
2326	'd humidity = .FALSE.'
2327	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2328	ENDIF
2329
2330	CASE ( 'ql' )
2331	IF ( .NOT. cloud_physics .AND. .NOT. cloud_droplets ) THEN
2332	message_string = 'data_output_pr = ' // &
2333	TRIM( data_output_pr(i) ) // ' is not imp' // &
2334	'lemented for cloud_physics = .FALSE. or' // &
2335	'&cloud_droplets = .FALSE.'
2336	CALL message( 'check_parameters', 'PA0096', 1, 2, 0, 6, 0 )
2337	ELSE
2338	dopr_index(i) = 54
2339	dopr_unit(i) = 'kg/kg'
2340	hom(:,2,54,:) = SPREAD( zu, 2, statistic_regions+1 )
2341	ENDIF
2342
2343	CASE ( 'wuu*:dz' )
2344	dopr_index(i) = 55
2345	dopr_unit(i) = 'm2/s3'
2346	hom(:,2,55,:) = SPREAD( zu, 2, statistic_regions+1 )
2347
2348	CASE ( 'wp:dz' )
2349	dopr_index(i) = 56
2350	dopr_unit(i) = 'm2/s3'
2351	hom(:,2,56,:) = SPREAD( zw, 2, statistic_regions+1 )
2352
2353	CASE ( 'w"e:dz' )
2354	dopr_index(i) = 57
2355	dopr_unit(i) = 'm2/s3'
2356	hom(:,2,57,:) = SPREAD( zu, 2, statistic_regions+1 )
2357
2358
2359	CASE ( 'u"pt"' )
2360	dopr_index(i) = 58
2361	dopr_unit(i) = 'K m/s'
2362	hom(:,2,58,:) = SPREAD( zu, 2, statistic_regions+1 )
2363
2364	CASE ( 'upt' )
2365	dopr_index(i) = 59
2366	dopr_unit(i) = 'K m/s'
2367	hom(:,2,59,:) = SPREAD( zu, 2, statistic_regions+1 )
2368
2369	CASE ( 'upt_t' )
2370	dopr_index(i) = 60
2371	dopr_unit(i) = 'K m/s'
2372	hom(:,2,60,:) = SPREAD( zu, 2, statistic_regions+1 )
2373
2374	CASE ( 'v"pt"' )
2375	dopr_index(i) = 61
2376	dopr_unit(i) = 'K m/s'
2377	hom(:,2,61,:) = SPREAD( zu, 2, statistic_regions+1 )
2378
2379	CASE ( 'vpt' )
2380	dopr_index(i) = 62
2381	dopr_unit(i) = 'K m/s'
2382	hom(:,2,62,:) = SPREAD( zu, 2, statistic_regions+1 )
2383
2384	CASE ( 'vpt_t' )
2385	dopr_index(i) = 63
2386	dopr_unit(i) = 'K m/s'
2387	hom(:,2,63,:) = SPREAD( zu, 2, statistic_regions+1 )
2388
2389	CASE ( 'rho' )
2390	IF ( .NOT. ocean ) THEN
2391	message_string = 'data_output_pr = ' // &
2392	TRIM( data_output_pr(i) ) // ' is not imp' // &
2393	'lemented for ocean = .FALSE.'
2394	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2395	ELSE
2396	dopr_index(i) = 64
2397	dopr_unit(i) = 'kg/m3'
2398	hom(:,2,64,:) = SPREAD( zu, 2, statistic_regions+1 )
2399	ENDIF
2400
2401	CASE ( 'w"sa"' )
2402	IF ( .NOT. ocean ) THEN
2403	message_string = 'data_output_pr = ' // &
2404	TRIM( data_output_pr(i) ) // ' is not imp' // &
2405	'lemented for ocean = .FALSE.'
2406	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2407	ELSE
2408	dopr_index(i) = 65
2409	dopr_unit(i) = 'psu m/s'
2410	hom(:,2,65,:) = SPREAD( zw, 2, statistic_regions+1 )
2411	ENDIF
2412
2413	CASE ( 'wsa' )
2414	IF ( .NOT. ocean ) THEN
2415	message_string = 'data_output_pr = ' // &
2416	TRIM( data_output_pr(i) ) // ' is not imp' // &
2417	'lemented for ocean = .FALSE.'
2418	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2419	ELSE
2420	dopr_index(i) = 66
2421	dopr_unit(i) = 'psu m/s'
2422	hom(:,2,66,:) = SPREAD( zw, 2, statistic_regions+1 )
2423	ENDIF
2424
2425	CASE ( 'wsa' )
2426	IF ( .NOT. ocean ) THEN
2427	message_string = 'data_output_pr = ' // &
2428	TRIM( data_output_pr(i) ) // ' is not imp' // &
2429	'lemented for ocean = .FALSE.'
2430	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2431	ELSE
2432	dopr_index(i) = 67
2433	dopr_unit(i) = 'psu m/s'
2434	hom(:,2,67,:) = SPREAD( zw, 2, statistic_regions+1 )
2435	ENDIF
2436
2437	CASE ( 'wp' )
2438	dopr_index(i) = 68
2439	dopr_unit(i) = 'm3/s3'
2440	hom(:,2,68,:) = SPREAD( zu, 2, statistic_regions+1 )
2441
2442	CASE ( 'w"e' )
2443	dopr_index(i) = 69
2444	dopr_unit(i) = 'm3/s3'
2445	hom(:,2,69,:) = SPREAD( zu, 2, statistic_regions+1 )
2446
2447	CASE ( 'q*2' )
2448	IF ( .NOT. humidity ) THEN
2449	message_string = 'data_output_pr = ' // &
2450	TRIM( data_output_pr(i) ) // ' is not imp' // &
2451	'lemented for humidity = .FALSE.'
2452	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2453	ELSE
2454	dopr_index(i) = 70
2455	dopr_unit(i) = 'kg2/kg2'
2456	hom(:,2,70,:) = SPREAD( zu, 2, statistic_regions+1 )
2457	ENDIF
2458
2459	CASE ( 'prho' )
2460	IF ( .NOT. ocean ) THEN
2461	message_string = 'data_output_pr = ' // &
2462	TRIM( data_output_pr(i) ) // ' is not imp' // &
2463	'lemented for ocean = .FALSE.'
2464	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2465	ELSE
2466	dopr_index(i) = 71
2467	dopr_unit(i) = 'kg/m3'
2468	hom(:,2,71,:) = SPREAD( zu, 2, statistic_regions+1 )
2469	ENDIF
2470
2471	CASE ( 'hyp' )
2472	dopr_index(i) = 72
2473	dopr_unit(i) = 'dbar'
2474	hom(:,2,72,:) = SPREAD( zu, 2, statistic_regions+1 )
2475
2476	CASE DEFAULT
2477
2478	CALL user_check_data_output_pr( data_output_pr(i), i, unit )
2479
2480	IF ( unit == 'illegal' ) THEN
2481	IF ( data_output_pr_user(1) /= ' ' ) THEN
2482	message_string = 'illegal value for data_output_pr or ' // &
2483	'data_output_pr_user = "' // &
2484	TRIM( data_output_pr(i) ) // '"'
2485	CALL message( 'check_parameters', 'PA0097', 1, 2, 0, 6, 0 )
2486	ELSE
2487	message_string = 'illegal value for data_output_pr = "' // &
2488	TRIM( data_output_pr(i) ) // '"'
2489	CALL message( 'check_parameters', 'PA0098', 1, 2, 0, 6, 0 )
2490	ENDIF
2491	ENDIF
2492
2493	END SELECT
2494
2495	!
2496	!-- Check to which of the predefined coordinate systems the profile belongs
2497	DO k = 1, crmax
2498	IF ( INDEX( cross_profiles(k), ' '//TRIM( data_output_pr(i) )//' ' ) &
2499	/=0 ) &
2500	THEN
2501	dopr_crossindex(i) = k
2502	EXIT
2503	ENDIF
2504	ENDDO
2505	!
2506	!-- Generate the text for the labels of the PROFIL output file. "-characters
2507	!-- must be substituted, otherwise PROFIL would interpret them as TeX
2508	!-- control characters
2509	dopr_label(i) = data_output_pr(i)
2510	position = INDEX( dopr_label(i) , '"' )
2511	DO WHILE ( position /= 0 )
2512	dopr_label(i)(position:position) = ''''
2513	position = INDEX( dopr_label(i) , '"' )
2514	ENDDO
2515
2516	ENDDO
2517
2518	!
2519	!-- y-value range of the coordinate system (PROFIL).
2520	!-- x-value range determined in plot_1d.
2521	IF ( .NOT. ocean ) THEN
2522	cross_uymin = 0.0
2523	IF ( z_max_do1d == -1.0 ) THEN
2524	cross_uymax = zu(nzt+1)
2525	ELSEIF ( z_max_do1d < zu(nzb+1) .OR. z_max_do1d > zu(nzt+1) ) THEN
2526	WRITE( message_string, * ) 'z_max_do1d = ', z_max_do1d, ' must ', &
2527	'be >= ', zu(nzb+1), ' or <= ', zu(nzt+1)
2528	CALL message( 'check_parameters', 'PA0099', 1, 2, 0, 6, 0 )
2529	ELSE
2530	cross_uymax = z_max_do1d
2531	ENDIF
2532	ENDIF
2533
2534	!
2535	!-- Check whether the chosen normalizing factor for the coordinate systems is
2536	!-- permissible
2537	DO i = 1, crmax
2538	SELECT CASE ( TRIM( cross_normalized_x(i) ) ) ! TRIM required on IBM
2539
2540	CASE ( '', 'wpt0', 'ws2', 'tsw2', 'ws3', 'ws2tsw', 'wstsw2' )
2541	j = 0
2542
2543	CASE DEFAULT
2544	message_string = 'unknown normalization method cross_normali' // &
2545	'zed_x = "' // TRIM( cross_normalized_x(i) ) // &
2546	'"'
2547	CALL message( 'check_parameters', 'PA0100', 1, 2, 0, 6, 0 )
2548
2549	END SELECT
2550	SELECT CASE ( TRIM( cross_normalized_y(i) ) ) ! TRIM required on IBM
2551
2552	CASE ( '', 'z_i' )
2553	j = 0
2554
2555	CASE DEFAULT
2556	message_string = 'unknown normalization method cross_normali' // &
2557	'zed_y = "' // TRIM( cross_normalized_y(i) ) // &
2558	'"'
2559	CALL message( 'check_parameters', 'PA0101', 1, 2, 0, 6, 0 )
2560
2561	END SELECT
2562	ENDDO
2563	!
2564	!-- Check normalized y-value range of the coordinate system (PROFIL)
2565	IF ( z_max_do1d_normalized /= -1.0 .AND. z_max_do1d_normalized <= 0.0 ) &
2566	THEN
2567	WRITE( message_string, * ) 'z_max_do1d_normalized = ', &
2568	z_max_do1d_normalized, ' must be >= 0.0'
2569	CALL message( 'check_parameters', 'PA0101', 1, 2, 0, 6, 0 )
2570	ENDIF
2571
2572
2573	!
2574	!-- Append user-defined data output variables to the standard data output
2575	IF ( data_output_user(1) /= ' ' ) THEN
2576	i = 1
2577	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
2578	i = i + 1
2579	ENDDO
2580	j = 1
2581	DO WHILE ( data_output_user(j) /= ' ' .AND. j <= 100 )
2582	IF ( i > 100 ) THEN
2583	message_string = 'number of output quantitities given by data' // &
2584	'_output and data_output_user exceeds the limit of 100'
2585	CALL message( 'check_parameters', 'PA0102', 1, 2, 0, 6, 0 )
2586	ENDIF
2587	data_output(i) = data_output_user(j)
2588	i = i + 1
2589	j = j + 1
2590	ENDDO
2591	ENDIF
2592
2593	!
2594	!-- Check and set steering parameters for 2d/3d data output and averaging
2595	i = 1
2596	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
2597	!
2598	!-- Check for data averaging
2599	ilen = LEN_TRIM( data_output(i) )
2600	j = 0 ! no data averaging
2601	IF ( ilen > 3 ) THEN
2602	IF ( data_output(i)(ilen-2:ilen) == '_av' ) THEN
2603	j = 1 ! data averaging
2604	data_output(i) = data_output(i)(1:ilen-3)
2605	ENDIF
2606	ENDIF
2607	!
2608	!-- Check for cross section or volume data
2609	ilen = LEN_TRIM( data_output(i) )
2610	k = 0 ! 3d data
2611	var = data_output(i)(1:ilen)
2612	IF ( ilen > 3 ) THEN
2613	IF ( data_output(i)(ilen-2:ilen) == '_xy' .OR. &
2614	data_output(i)(ilen-2:ilen) == '_xz' .OR. &
2615	data_output(i)(ilen-2:ilen) == '_yz' ) THEN
2616	k = 1 ! 2d data
2617	var = data_output(i)(1:ilen-3)
2618	ENDIF
2619	ENDIF
2620	!
2621	!-- Check for allowed value and set units
2622	SELECT CASE ( TRIM( var ) )
2623
2624	CASE ( 'e' )
2625	IF ( constant_diffusion ) THEN
2626	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2627	'res constant_diffusion = .FALSE.'
2628	CALL message( 'check_parameters', 'PA0103', 1, 2, 0, 6, 0 )
2629	ENDIF
2630	unit = 'm2/s2'
2631
2632	CASE ( 'lpt' )
2633	IF ( .NOT. cloud_physics ) THEN
2634	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2635	'res cloud_physics = .TRUE.'
2636	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2637	ENDIF
2638	unit = 'K'
2639
2640	CASE ( 'pc', 'pr' )
2641	IF ( .NOT. particle_advection ) THEN
2642	message_string = 'output of "' // TRIM( var ) // '" requir' // &
2643	'es a "particles_par"-NAMELIST in the parameter file (PARIN)'
2644	CALL message( 'check_parameters', 'PA0104', 1, 2, 0, 6, 0 )
2645	ENDIF
2646	IF ( TRIM( var ) == 'pc' ) unit = 'number'
2647	IF ( TRIM( var ) == 'pr' ) unit = 'm'
2648
2649	CASE ( 'q', 'vpt' )
2650	IF ( .NOT. humidity ) THEN
2651	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2652	'res humidity = .TRUE.'
2653	CALL message( 'check_parameters', 'PA0105', 1, 2, 0, 6, 0 )
2654	ENDIF
2655	IF ( TRIM( var ) == 'q' ) unit = 'kg/kg'
2656	IF ( TRIM( var ) == 'vpt' ) unit = 'K'
2657
2658	CASE ( 'ql' )
2659	IF ( .NOT. ( cloud_physics .OR. cloud_droplets ) ) THEN
2660	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2661	'res cloud_physics = .TRUE. or cloud_droplets = .TRUE.'
2662	CALL message( 'check_parameters', 'PA0106', 1, 2, 0, 6, 0 )
2663	ENDIF
2664	unit = 'kg/kg'
2665
2666	CASE ( 'ql_c', 'ql_v', 'ql_vp' )
2667	IF ( .NOT. cloud_droplets ) THEN
2668	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2669	'res cloud_droplets = .TRUE.'
2670	CALL message( 'check_parameters', 'PA0107', 1, 2, 0, 6, 0 )
2671	ENDIF
2672	IF ( TRIM( var ) == 'ql_c' ) unit = 'kg/kg'
2673	IF ( TRIM( var ) == 'ql_v' ) unit = 'm3'
2674	IF ( TRIM( var ) == 'ql_vp' ) unit = 'none'
2675
2676	CASE ( 'qv' )
2677	IF ( .NOT. cloud_physics ) THEN
2678	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2679	'res cloud_physics = .TRUE.'
2680	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2681	ENDIF
2682	unit = 'kg/kg'
2683
2684	CASE ( 'rho' )
2685	IF ( .NOT. ocean ) THEN
2686	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2687	'res ocean = .TRUE.'
2688	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
2689	ENDIF
2690	unit = 'kg/m3'
2691
2692	CASE ( 's' )
2693	IF ( .NOT. passive_scalar ) THEN
2694	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2695	'res passive_scalar = .TRUE.'
2696	CALL message( 'check_parameters', 'PA0110', 1, 2, 0, 6, 0 )
2697	ENDIF
2698	unit = 'conc'
2699
2700	CASE ( 'sa' )
2701	IF ( .NOT. ocean ) THEN
2702	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2703	'res ocean = .TRUE.'
2704	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
2705	ENDIF
2706	unit = 'psu'
2707
2708	CASE ( 'u', 't', 'lwp', 'pra', 'prr', 'qsws', 'shf', 'z0' )
2709	IF ( k == 0 .OR. data_output(i)(ilen-2:ilen) /= '_xy' ) THEN
2710	message_string = 'illegal value for data_output: "' // &
2711	TRIM( var ) // '" & only 2d-horizontal ' // &
2712	'cross sections are allowed for this value'
2713	CALL message( 'check_parameters', 'PA0111', 1, 2, 0, 6, 0 )
2714	ENDIF
2715	IF ( TRIM( var ) == 'lwp*' .AND. .NOT. cloud_physics ) THEN
2716	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2717	'res cloud_physics = .TRUE.'
2718	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2719	ENDIF
2720	IF ( TRIM( var ) == 'pra*' .AND. .NOT. precipitation ) THEN
2721	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2722	'res precipitation = .TRUE.'
2723	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2724	ENDIF
2725	IF ( TRIM( var ) == 'pra*' .AND. j == 1 ) THEN
2726	message_string = 'temporal averaging of precipitation ' // &
2727	'amount "' // TRIM( var ) // '" is not possible'
2728	CALL message( 'check_parameters', 'PA0113', 1, 2, 0, 6, 0 )
2729	ENDIF
2730	IF ( TRIM( var ) == 'prr*' .AND. .NOT. precipitation ) THEN
2731	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2732	'res precipitation = .TRUE.'
2733	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2734	ENDIF
2735	IF ( TRIM( var ) == 'qsws*' .AND. .NOT. humidity ) THEN
2736	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2737	'res humidity = .TRUE.'
2738	CALL message( 'check_parameters', 'PA0322', 1, 2, 0, 6, 0 )
2739	ENDIF
2740
2741	IF ( TRIM( var ) == 'lwp' ) unit = 'kg/kgm'
2742	IF ( TRIM( var ) == 'pra*' ) unit = 'mm'
2743	IF ( TRIM( var ) == 'prr*' ) unit = 'mm/s'
2744	IF ( TRIM( var ) == 'qsws*' ) unit = 'kgm/kgs'
2745	IF ( TRIM( var ) == 'shf' ) unit = 'Km/s'
2746	IF ( TRIM( var ) == 't*' ) unit = 'K'
2747	IF ( TRIM( var ) == 'u*' ) unit = 'm/s'
2748	IF ( TRIM( var ) == 'z0*' ) unit = 'm'
2749
2750
2751	CASE ( 'p', 'pt', 'u', 'v', 'w' )
2752	IF ( TRIM( var ) == 'p' ) unit = 'Pa'
2753	IF ( TRIM( var ) == 'pt' ) unit = 'K'
2754	IF ( TRIM( var ) == 'u' ) unit = 'm/s'
2755	IF ( TRIM( var ) == 'v' ) unit = 'm/s'
2756	IF ( TRIM( var ) == 'w' ) unit = 'm/s'
2757	CONTINUE
2758
2759	CASE DEFAULT
2760	CALL user_check_data_output( var, unit )
2761
2762	IF ( unit == 'illegal' ) THEN
2763	IF ( data_output_user(1) /= ' ' ) THEN
2764	message_string = 'illegal value for data_output or ' // &
2765	'data_output_user = "' // TRIM( data_output(i) ) // '"'
2766	CALL message( 'check_parameters', 'PA0114', 1, 2, 0, 6, 0 )
2767	ELSE
2768	message_string = 'illegal value for data_output =' // &
2769	TRIM( data_output(i) ) // '"'
2770	CALL message( 'check_parameters', 'PA0115', 1, 2, 0, 6, 0 )
2771	ENDIF
2772	ENDIF
2773
2774	END SELECT
2775	!
2776	!-- Set the internal steering parameters appropriately
2777	IF ( k == 0 ) THEN
2778	do3d_no(j) = do3d_no(j) + 1
2779	do3d(j,do3d_no(j)) = data_output(i)
2780	do3d_unit(j,do3d_no(j)) = unit
2781	ELSE
2782	do2d_no(j) = do2d_no(j) + 1
2783	do2d(j,do2d_no(j)) = data_output(i)
2784	do2d_unit(j,do2d_no(j)) = unit
2785	IF ( data_output(i)(ilen-2:ilen) == '_xy' ) THEN
2786	data_output_xy(j) = .TRUE.
2787	ENDIF
2788	IF ( data_output(i)(ilen-2:ilen) == '_xz' ) THEN
2789	data_output_xz(j) = .TRUE.
2790	ENDIF
2791	IF ( data_output(i)(ilen-2:ilen) == '_yz' ) THEN
2792	data_output_yz(j) = .TRUE.
2793	ENDIF
2794	ENDIF
2795
2796	IF ( j == 1 ) THEN
2797	!
2798	!-- Check, if variable is already subject to averaging
2799	found = .FALSE.
2800	DO k = 1, doav_n
2801	IF ( TRIM( doav(k) ) == TRIM( var ) ) found = .TRUE.
2802	ENDDO
2803
2804	IF ( .NOT. found ) THEN
2805	doav_n = doav_n + 1
2806	doav(doav_n) = var
2807	ENDIF
2808	ENDIF
2809
2810	i = i + 1
2811	ENDDO
2812
2813	!
2814	!-- Averaged 2d or 3d output requires that an averaging interval has been set
2815	IF ( doav_n > 0 .AND. averaging_interval == 0.0 ) THEN
2816	WRITE( message_string, * ) 'output of averaged quantity "', &
2817	TRIM( doav(1) ), '_av" requires to set a ', &
2818	'non-zero & averaging interval'
2819	CALL message( 'check_parameters', 'PA0323', 1, 2, 0, 6, 0 )
2820	ENDIF
2821
2822	!
2823	!-- Check sectional planes and store them in one shared array
2824	IF ( ANY( section_xy > nz + 1 ) ) THEN
2825	WRITE( message_string, * ) 'section_xy must be <= nz + 1 = ', nz + 1
2826	CALL message( 'check_parameters', 'PA0319', 1, 2, 0, 6, 0 )
2827	ENDIF
2828	IF ( ANY( section_xz > ny + 1 ) ) THEN
2829	WRITE( message_string, * ) 'section_xz must be <= ny + 1 = ', ny + 1
2830	CALL message( 'check_parameters', 'PA0320', 1, 2, 0, 6, 0 )
2831	ENDIF
2832	IF ( ANY( section_yz > nx + 1 ) ) THEN
2833	WRITE( message_string, * ) 'section_yz must be <= nx + 1 = ', nx + 1
2834	CALL message( 'check_parameters', 'PA0321', 1, 2, 0, 6, 0 )
2835	ENDIF
2836	section(:,1) = section_xy
2837	section(:,2) = section_xz
2838	section(:,3) = section_yz
2839
2840	!
2841	!-- Upper plot limit (grid point value) for 1D profiles
2842	IF ( z_max_do1d == -1.0 ) THEN
2843
2844	nz_do1d = nzt+1
2845
2846	ELSE
2847	DO k = nzb+1, nzt+1
2848	nz_do1d = k
2849	IF ( zw(k) > z_max_do1d ) EXIT
2850	ENDDO
2851	ENDIF
2852
2853	!
2854	!-- Upper plot limit for 2D vertical sections
2855	IF ( z_max_do2d == -1.0 ) z_max_do2d = zu(nzt)
2856	IF ( z_max_do2d < zu(nzb+1) .OR. z_max_do2d > zu(nzt) ) THEN
2857	WRITE( message_string, * ) 'z_max_do2d = ', z_max_do2d, &
2858	' must be >= ', zu(nzb+1), '(zu(nzb+1)) and <= ', zu(nzt), &
2859	' (zu(nzt))'
2860	CALL message( 'check_parameters', 'PA0116', 1, 2, 0, 6, 0 )
2861	ENDIF
2862
2863	!
2864	!-- Upper plot limit for 3D arrays
2865	IF ( nz_do3d == -9999 ) nz_do3d = nzt + 1
2866
2867	!
2868	!-- Determine and check accuracy for compressed 3D plot output
2869	IF ( do3d_compress ) THEN
2870	!
2871	!-- Compression only permissible on T3E machines
2872	IF ( host(1:3) /= 't3e' ) THEN
2873	message_string = 'do3d_compress = .TRUE. not allowed on host "' // &
2874	TRIM( host ) // '"'
2875	CALL message( 'check_parameters', 'PA0117', 1, 2, 0, 6, 0 )
2876	ENDIF
2877
2878	i = 1
2879	DO WHILE ( do3d_comp_prec(i) /= ' ' )
2880
2881	ilen = LEN_TRIM( do3d_comp_prec(i) )
2882	IF ( LLT( do3d_comp_prec(i)(ilen:ilen), '0' ) .OR. &
2883	LGT( do3d_comp_prec(i)(ilen:ilen), '9' ) ) THEN
2884	WRITE( message_string, * ) 'illegal precision: do3d_comp_prec', &
2885	'(', i, ') = "', TRIM(do3d_comp_prec(i)),'"'
2886	CALL message( 'check_parameters', 'PA0118', 1, 2, 0, 6, 0 )
2887	ENDIF
2888
2889	prec = IACHAR( do3d_comp_prec(i)(ilen:ilen) ) - IACHAR( '0' )
2890	var = do3d_comp_prec(i)(1:ilen-1)
2891
2892	SELECT CASE ( var )
2893
2894	CASE ( 'u' )
2895	j = 1
2896	CASE ( 'v' )
2897	j = 2
2898	CASE ( 'w' )
2899	j = 3
2900	CASE ( 'p' )
2901	j = 4
2902	CASE ( 'pt' )
2903	j = 5
2904
2905	CASE DEFAULT
2906	WRITE( message_string, * ) 'unknown variable "', &
2907	TRIM( do3d_comp_prec(i) ), '" given for do3d_comp_prec(', &
2908	i, ')'
2909	CALL message( 'check_parameters', 'PA0119', 1, 2, 0, 6, 0 )
2910
2911	END SELECT
2912
2913	plot_3d_precision(j)%precision = prec
2914	i = i + 1
2915
2916	ENDDO
2917	ENDIF
2918
2919	!
2920	!-- Check the data output format(s)
2921	IF ( data_output_format(1) == ' ' ) THEN
2922	!
2923	!-- Default value
2924	netcdf_output = .TRUE.
2925	ELSE
2926	i = 1
2927	DO WHILE ( data_output_format(i) /= ' ' )
2928
2929	SELECT CASE ( data_output_format(i) )
2930
2931	CASE ( 'netcdf' )
2932	netcdf_output = .TRUE.
2933	CASE ( 'iso2d' )
2934	iso2d_output = .TRUE.
2935	CASE ( 'profil' )
2936	profil_output = .TRUE.
2937	CASE ( 'avs' )
2938	avs_output = .TRUE.
2939
2940	CASE DEFAULT
2941	message_string = 'unknown value for data_output_format "' // &
2942	TRIM( data_output_format(i) ) // '"'
2943	CALL message( 'check_parameters', 'PA0120', 1, 2, 0, 6, 0 )
2944
2945	END SELECT
2946
2947	i = i + 1
2948	IF ( i > 10 ) EXIT
2949
2950	ENDDO
2951
2952	ENDIF
2953
2954	!
2955	!-- Check mask conditions
2956	DO mid = 1, max_masks
2957	IF ( data_output_masks(mid,1) /= ' ' .OR. &
2958	data_output_masks_user(mid,1) /= ' ' ) THEN
2959	masks = masks + 1
2960	ENDIF
2961	ENDDO
2962
2963	IF ( masks < 0 .OR. masks > max_masks ) THEN
2964	WRITE( message_string, * ) 'illegal value: masks must be >= 0 and ', &
2965	'<= ', max_masks, ' (=max_masks)'
2966	CALL message( 'check_parameters', 'PA0325', 1, 2, 0, 6, 0 )
2967	ENDIF
2968	IF ( masks > 0 ) THEN
2969	mask_scale(1) = mask_scale_x
2970	mask_scale(2) = mask_scale_y
2971	mask_scale(3) = mask_scale_z
2972	IF ( ANY( mask_scale <= 0.0 ) ) THEN
2973	WRITE( message_string, * ) &
2974	'illegal value: mask_scale_x, mask_scale_y and mask_scale_z', &
2975	'must be > 0.0'
2976	CALL message( 'check_parameters', 'PA0326', 1, 2, 0, 6, 0 )
2977	ENDIF
2978	!
2979	!-- Generate masks for masked data output
2980	CALL init_masks
2981	ENDIF
2982
2983	!
2984	!-- Check the NetCDF data format
2985	IF ( netcdf_data_format > 2 ) THEN
2986	#if defined( __netcdf4 )
2987	CONTINUE
2988	#else
2989	message_string = 'NetCDF: NetCDF4 format requested but no ' // &
2990	'cpp-directive __netcdf4 given & switch ' // &
2991	'back to 64-bit offset format'
2992	CALL message( 'check_parameters', 'PA0171', 0, 1, 0, 6, 0 )
2993	netcdf_data_format = 2
2994	#endif
2995	ENDIF
2996
2997	!
2998
2999	#if ! defined( __check )
3000	!-- Check netcdf precison
3001	ldum = .FALSE.
3002	CALL define_netcdf_header( 'ch', ldum, 0 )
3003	#endif
3004	!
3005	!-- Check, whether a constant diffusion coefficient shall be used
3006	IF ( km_constant /= -1.0 ) THEN
3007	IF ( km_constant < 0.0 ) THEN
3008	WRITE( message_string, * ) 'km_constant = ', km_constant, ' < 0.0'
3009	CALL message( 'check_parameters', 'PA0121', 1, 2, 0, 6, 0 )
3010	ELSE
3011	IF ( prandtl_number < 0.0 ) THEN
3012	WRITE( message_string, * ) 'prandtl_number = ', prandtl_number, &
3013	' < 0.0'
3014	CALL message( 'check_parameters', 'PA0122', 1, 2, 0, 6, 0 )
3015	ENDIF
3016	constant_diffusion = .TRUE.
3017
3018	IF ( prandtl_layer ) THEN
3019	message_string = 'prandtl_layer is not allowed with fixed ' // &
3020	'value of km'
3021	CALL message( 'check_parameters', 'PA0123', 1, 2, 0, 6, 0 )
3022	ENDIF
3023	ENDIF
3024	ENDIF
3025
3026	!
3027	!-- In case of non-cyclic lateral boundaries, set the default maximum value
3028	!-- for the horizontal diffusivity used within the outflow damping layer,
3029	!-- and check/set the width of the damping layer
3030	IF ( bc_lr /= 'cyclic' ) THEN
3031	IF ( km_damp_max == -1.0 ) THEN
3032	km_damp_max = 0.5 * dx
3033	ENDIF
3034	IF ( outflow_damping_width == -1.0 ) THEN
3035	outflow_damping_width = MIN( 20, nx/2 )
3036	ENDIF
3037	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > nx ) THEN
3038	message_string = 'outflow_damping width out of range'
3039	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
3040	ENDIF
3041	ENDIF
3042
3043	IF ( bc_ns /= 'cyclic' ) THEN
3044	IF ( km_damp_max == -1.0 ) THEN
3045	km_damp_max = 0.5 * dy
3046	ENDIF
3047	IF ( outflow_damping_width == -1.0 ) THEN
3048	outflow_damping_width = MIN( 20, ny/2 )
3049	ENDIF
3050	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > ny ) THEN
3051	message_string = 'outflow_damping width out of range'
3052	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
3053	ENDIF
3054	ENDIF
3055
3056	!
3057	!-- Check value range for rif
3058	IF ( rif_min >= rif_max ) THEN
3059	WRITE( message_string, * ) 'rif_min = ', rif_min, ' must be less ', &
3060	'than rif_max = ', rif_max
3061	CALL message( 'check_parameters', 'PA0125', 1, 2, 0, 6, 0 )
3062	ENDIF
3063
3064	!
3065	!-- Determine upper and lower hight level indices for random perturbations
3066	IF ( disturbance_level_b == -9999999.9 ) THEN
3067	IF ( ocean ) THEN
3068	disturbance_level_b = zu((nzt*2)/3)
3069	disturbance_level_ind_b = ( nzt * 2 ) / 3
3070	ELSE
3071	disturbance_level_b = zu(nzb+3)
3072	disturbance_level_ind_b = nzb + 3
3073	ENDIF
3074	ELSEIF ( disturbance_level_b < zu(3) ) THEN
3075	WRITE( message_string, * ) 'disturbance_level_b = ', &
3076	disturbance_level_b, ' must be >= ', zu(3), '(zu(3))'
3077	CALL message( 'check_parameters', 'PA0126', 1, 2, 0, 6, 0 )
3078	ELSEIF ( disturbance_level_b > zu(nzt-2) ) THEN
3079	WRITE( message_string, * ) 'disturbance_level_b = ', &
3080	disturbance_level_b, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
3081	CALL message( 'check_parameters', 'PA0127', 1, 2, 0, 6, 0 )
3082	ELSE
3083	DO k = 3, nzt-2
3084	IF ( disturbance_level_b <= zu(k) ) THEN
3085	disturbance_level_ind_b = k
3086	EXIT
3087	ENDIF
3088	ENDDO
3089	ENDIF
3090
3091	IF ( disturbance_level_t == -9999999.9 ) THEN
3092	IF ( ocean ) THEN
3093	disturbance_level_t = zu(nzt-3)
3094	disturbance_level_ind_t = nzt - 3
3095	ELSE
3096	disturbance_level_t = zu(nzt/3)
3097	disturbance_level_ind_t = nzt / 3
3098	ENDIF
3099	ELSEIF ( disturbance_level_t > zu(nzt-2) ) THEN
3100	WRITE( message_string, * ) 'disturbance_level_t = ', &
3101	disturbance_level_t, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
3102	CALL message( 'check_parameters', 'PA0128', 1, 2, 0, 6, 0 )
3103	ELSEIF ( disturbance_level_t < disturbance_level_b ) THEN
3104	WRITE( message_string, * ) 'disturbance_level_t = ', &
3105	disturbance_level_t, ' must be >= disturbance_level_b = ', &
3106	disturbance_level_b
3107	CALL message( 'check_parameters', 'PA0129', 1, 2, 0, 6, 0 )
3108	ELSE
3109	DO k = 3, nzt-2
3110	IF ( disturbance_level_t <= zu(k) ) THEN
3111	disturbance_level_ind_t = k
3112	EXIT
3113	ENDIF
3114	ENDDO
3115	ENDIF
3116
3117	!
3118	!-- Check again whether the levels determined this way are ok.
3119	!-- Error may occur at automatic determination and too few grid points in
3120	!-- z-direction.
3121	IF ( disturbance_level_ind_t < disturbance_level_ind_b ) THEN
3122	WRITE( message_string, * ) 'disturbance_level_ind_t = ', &
3123	disturbance_level_ind_t, ' must be >= disturbance_level_b = ', &
3124	disturbance_level_b
3125	CALL message( 'check_parameters', 'PA0130', 1, 2, 0, 6, 0 )
3126	ENDIF
3127
3128	!
3129	!-- Determine the horizontal index range for random perturbations.
3130	!-- In case of non-cyclic horizontal boundaries, no perturbations are imposed
3131	!-- near the inflow and the perturbation area is further limited to ...(1)
3132	!-- after the initial phase of the flow.
3133	dist_nxl = 0; dist_nxr = nx
3134	dist_nys = 0; dist_nyn = ny
3135	IF ( bc_lr /= 'cyclic' ) THEN
3136	IF ( inflow_disturbance_begin == -1 ) THEN
3137	inflow_disturbance_begin = MIN( 10, nx/2 )
3138	ENDIF
3139	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > nx )&
3140	THEN
3141	message_string = 'inflow_disturbance_begin out of range'
3142	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
3143	ENDIF
3144	IF ( inflow_disturbance_end == -1 ) THEN
3145	inflow_disturbance_end = MIN( 100, 3*nx/4 )
3146	ENDIF
3147	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > nx ) &
3148	THEN
3149	message_string = 'inflow_disturbance_end out of range'
3150	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
3151	ENDIF
3152	ELSEIF ( bc_ns /= 'cyclic' ) THEN
3153	IF ( inflow_disturbance_begin == -1 ) THEN
3154	inflow_disturbance_begin = MIN( 10, ny/2 )
3155	ENDIF
3156	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > ny )&
3157	THEN
3158	message_string = 'inflow_disturbance_begin out of range'
3159	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
3160	ENDIF
3161	IF ( inflow_disturbance_end == -1 ) THEN
3162	inflow_disturbance_end = MIN( 100, 3*ny/4 )
3163	ENDIF
3164	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > ny ) &
3165	THEN
3166	message_string = 'inflow_disturbance_end out of range'
3167	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
3168	ENDIF
3169	ENDIF
3170
3171	IF ( bc_lr == 'radiation/dirichlet' ) THEN
3172	dist_nxr = nx - inflow_disturbance_begin
3173	dist_nxl(1) = nx - inflow_disturbance_end
3174	ELSEIF ( bc_lr == 'dirichlet/radiation' ) THEN
3175	dist_nxl = inflow_disturbance_begin
3176	dist_nxr(1) = inflow_disturbance_end
3177	ENDIF
3178	IF ( bc_ns == 'dirichlet/radiation' ) THEN
3179	dist_nyn = ny - inflow_disturbance_begin
3180	dist_nys(1) = ny - inflow_disturbance_end
3181	ELSEIF ( bc_ns == 'radiation/dirichlet' ) THEN
3182	dist_nys = inflow_disturbance_begin
3183	dist_nyn(1) = inflow_disturbance_end
3184	ENDIF
3185
3186	!
3187	!-- A turbulent inflow requires Dirichlet conditions at the respective inflow
3188	!-- boundary (so far, a turbulent inflow is realized from the left side only)
3189	IF ( turbulent_inflow .AND. bc_lr /= 'dirichlet/radiation' ) THEN
3190	message_string = 'turbulent_inflow = .T. requires a Dirichlet ' // &
3191	'condition at the inflow boundary'
3192	CALL message( 'check_parameters', 'PA0133', 1, 2, 0, 6, 0 )
3193	ENDIF
3194
3195	!
3196	!-- In case of turbulent inflow calculate the index of the recycling plane
3197	IF ( turbulent_inflow ) THEN
3198	IF ( recycling_width == 9999999.9 ) THEN
3199	!
3200	!-- Set the default value for the width of the recycling domain
3201	recycling_width = 0.1 * nx * dx
3202	ELSE
3203	IF ( recycling_width < dx .OR. recycling_width > nx * dx ) THEN
3204	WRITE( message_string, * ) 'illegal value for recycling_width:', &
3205	' ', recycling_width
3206	CALL message( 'check_parameters', 'PA0134', 1, 2, 0, 6, 0 )
3207	ENDIF
3208	ENDIF
3209	!
3210	!-- Calculate the index
3211	recycling_plane = recycling_width / dx
3212	ENDIF
3213
3214	!
3215	!-- Check random generator
3216	IF ( random_generator /= 'system-specific' .AND. &
3217	random_generator /= 'numerical-recipes' ) THEN
3218	message_string = 'unknown random generator: random_generator = "' // &
3219	TRIM( random_generator ) // '"'
3220	CALL message( 'check_parameters', 'PA0135', 1, 2, 0, 6, 0 )
3221	ENDIF
3222
3223	!
3224	!-- Determine damping level index for 1D model
3225	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
3226	IF ( damp_level_1d == -1.0 ) THEN
3227	damp_level_1d = zu(nzt+1)
3228	damp_level_ind_1d = nzt + 1
3229	ELSEIF ( damp_level_1d < 0.0 .OR. damp_level_1d > zu(nzt+1) ) THEN
3230	WRITE( message_string, * ) 'damp_level_1d = ', damp_level_1d, &
3231	' must be > 0.0 and < ', zu(nzt+1), '(zu(nzt+1))'
3232	CALL message( 'check_parameters', 'PA0136', 1, 2, 0, 6, 0 )
3233	ELSE
3234	DO k = 1, nzt+1
3235	IF ( damp_level_1d <= zu(k) ) THEN
3236	damp_level_ind_1d = k
3237	EXIT
3238	ENDIF
3239	ENDDO
3240	ENDIF
3241	ENDIF
3242
3243	!
3244	!-- Check some other 1d-model parameters
3245	IF ( TRIM( mixing_length_1d ) /= 'as_in_3d_model' .AND. &
3246	TRIM( mixing_length_1d ) /= 'blackadar' ) THEN
3247	message_string = 'mixing_length_1d = "' // TRIM( mixing_length_1d ) // &
3248	'" is unknown'
3249	CALL message( 'check_parameters', 'PA0137', 1, 2, 0, 6, 0 )
3250	ENDIF
3251	IF ( TRIM( dissipation_1d ) /= 'as_in_3d_model' .AND. &
3252	TRIM( dissipation_1d ) /= 'detering' ) THEN
3253	message_string = 'dissipation_1d = "' // TRIM( dissipation_1d ) // &
3254	'" is unknown'
3255	CALL message( 'check_parameters', 'PA0138', 1, 2, 0, 6, 0 )
3256	ENDIF
3257
3258	!
3259	!-- Set time for the next user defined restart (time_restart is the
3260	!-- internal parameter for steering restart events)
3261	IF ( restart_time /= 9999999.9 ) THEN
3262	IF ( restart_time > time_since_reference_point ) THEN
3263	time_restart = restart_time
3264	ENDIF
3265	ELSE
3266	!
3267	!-- In case of a restart run, set internal parameter to default (no restart)
3268	!-- if the NAMELIST-parameter restart_time is omitted
3269	time_restart = 9999999.9
3270	ENDIF
3271
3272	!
3273	!-- Set default value of the time needed to terminate a model run
3274	IF ( termination_time_needed == -1.0 ) THEN
3275	IF ( host(1:3) == 'ibm' ) THEN
3276	termination_time_needed = 300.0
3277	ELSE
3278	termination_time_needed = 35.0
3279	ENDIF
3280	ENDIF
3281
3282	!
3283	!-- Check the time needed to terminate a model run
3284	IF ( host(1:3) == 't3e' ) THEN
3285	!
3286	!-- Time needed must be at least 30 seconds on all CRAY machines, because
3287	!-- MPP_TREMAIN gives the remaining CPU time only in steps of 30 seconds
3288	IF ( termination_time_needed <= 30.0 ) THEN
3289	WRITE( message_string, * ) 'termination_time_needed = ', &
3290	termination_time_needed, ' must be > 30.0 on host "', &
3291	TRIM( host ), '"'
3292	CALL message( 'check_parameters', 'PA0139', 1, 2, 0, 6, 0 )
3293	ENDIF
3294	ELSEIF ( host(1:3) == 'ibm' ) THEN
3295	!
3296	!-- On IBM-regatta machines the time should be at least 300 seconds,
3297	!-- because the job time consumed before executing palm (for compiling,
3298	!-- copying of files, etc.) has to be regarded
3299	IF ( termination_time_needed < 300.0 ) THEN
3300	WRITE( message_string, * ) 'termination_time_needed = ', &
3301	termination_time_needed, ' should be >= 300.0 on host "', &
3302	TRIM( host ), '"'
3303	CALL message( 'check_parameters', 'PA0140', 1, 2, 0, 6, 0 )
3304	ENDIF
3305	ENDIF
3306
3307	!
3308	!-- Check pressure gradient conditions
3309	IF ( dp_external .AND. conserve_volume_flow ) THEN
3310	WRITE( message_string, * ) 'Both dp_external and conserve_volume_flo', &
3311	'w are .TRUE. but one of them must be .FALSE.'
3312	CALL message( 'check_parameters', 'PA0150', 1, 2, 0, 6, 0 )
3313	ENDIF
3314	IF ( dp_external ) THEN
3315	IF ( dp_level_b < zu(nzb) .OR. dp_level_b > zu(nzt) ) THEN
3316	WRITE( message_string, * ) 'dp_level_b = ', dp_level_b, ' is out ', &
3317	' of range'
3318	CALL message( 'check_parameters', 'PA0151', 1, 2, 0, 6, 0 )
3319	ENDIF
3320	IF ( .NOT. ANY( dpdxy /= 0.0 ) ) THEN
3321	WRITE( message_string, * ) 'dp_external is .TRUE. but dpdxy is ze', &
3322	'ro, i.e. the external pressure gradient & will not be applied'
3323	CALL message( 'check_parameters', 'PA0152', 0, 1, 0, 6, 0 )
3324	ENDIF
3325	ENDIF
3326	IF ( ANY( dpdxy /= 0.0 ) .AND. .NOT. dp_external ) THEN
3327	WRITE( message_string, * ) 'dpdxy is nonzero but dp_external is ', &
3328	'.FALSE., i.e. the external pressure gradient & will not be applied'
3329	CALL message( 'check_parameters', 'PA0153', 0, 1, 0, 6, 0 )
3330	ENDIF
3331	IF ( conserve_volume_flow ) THEN
3332	IF ( TRIM( conserve_volume_flow_mode ) == 'default' ) THEN
3333
3334	conserve_volume_flow_mode = 'initial_profiles'
3335
3336	ELSEIF ( TRIM( conserve_volume_flow_mode ) /= 'initial_profiles' .AND. &
3337	TRIM( conserve_volume_flow_mode ) /= 'inflow_profile' .AND. &
3338	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) THEN
3339	WRITE( message_string, * ) 'unknown conserve_volume_flow_mode: ', &
3340	conserve_volume_flow_mode
3341	CALL message( 'check_parameters', 'PA0154', 1, 2, 0, 6, 0 )
3342	ENDIF
3343	IF ( (bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic') .AND. &
3344	TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
3345	WRITE( message_string, * ) 'non-cyclic boundary conditions ', &
3346	'require conserve_volume_flow_mode = ''initial_profiles'''
3347	CALL message( 'check_parameters', 'PA0155', 1, 2, 0, 6, 0 )
3348	ENDIF
3349	IF ( bc_lr == 'cyclic' .AND. bc_ns == 'cyclic' .AND. &
3350	TRIM( conserve_volume_flow_mode ) == 'inflow_profile' ) THEN
3351	WRITE( message_string, * ) 'cyclic boundary conditions ', &
3352	'require conserve_volume_flow_mode = ''initial_profiles''', &
3353	' or ''bulk_velocity'''
3354	CALL message( 'check_parameters', 'PA0156', 1, 2, 0, 6, 0 )
3355	ENDIF
3356	ENDIF
3357	IF ( ( u_bulk /= 0.0 .OR. v_bulk /= 0.0 ) .AND. &
3358	( .NOT. conserve_volume_flow .OR. &
3359	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) ) THEN
3360	WRITE( message_string, * ) 'nonzero bulk velocity requires ', &
3361	'conserve_volume_flow = .T. and ', &
3362	'conserve_volume_flow_mode = ''bulk_velocity'''
3363	CALL message( 'check_parameters', 'PA0157', 1, 2, 0, 6, 0 )
3364	ENDIF
3365
3366	!
3367	!-- Check particle attributes
3368	IF ( particle_color /= 'none' ) THEN
3369	IF ( particle_color /= 'absuv' .AND. particle_color /= 'pt*' .AND. &
3370	particle_color /= 'z' ) THEN
3371	message_string = 'illegal value for parameter particle_color: ' // &
3372	TRIM( particle_color)
3373	CALL message( 'check_parameters', 'PA0313', 1, 2, 0, 6, 0 )
3374	ELSE
3375	IF ( color_interval(2) <= color_interval(1) ) THEN
3376	message_string = 'color_interval(2) <= color_interval(1)'
3377	CALL message( 'check_parameters', 'PA0315', 1, 2, 0, 6, 0 )
3378	ENDIF
3379	ENDIF
3380	ENDIF
3381
3382	IF ( particle_dvrpsize /= 'none' ) THEN
3383	IF ( particle_dvrpsize /= 'absw' ) THEN
3384	message_string = 'illegal value for parameter particle_dvrpsize:' // &
3385	' ' // TRIM( particle_color)
3386	CALL message( 'check_parameters', 'PA0314', 1, 2, 0, 6, 0 )
3387	ELSE
3388	IF ( dvrpsize_interval(2) <= dvrpsize_interval(1) ) THEN
3389	message_string = 'dvrpsize_interval(2) <= dvrpsize_interval(1)'
3390	CALL message( 'check_parameters', 'PA0316', 1, 2, 0, 6, 0 )
3391	ENDIF
3392	ENDIF
3393	ENDIF
3394
3395	!
3396	!-- Check &userpar parameters
3397	CALL user_check_parameters
3398
3399
3400
3401	END SUBROUTINE check_parameters

Note: See TracBrowser for help on using the repository browser.

Context Navigation

source: palm/trunk/SOURCE/check_parameters.f90 @ 828

Download in other formats: