Home

Context Navigation

source: palm/trunk/SOURCE/check_parameters.f90 @ 818

Last change on this file since 818 was 810, checked in by maronga, 12 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 131.1 KB

Line
1	SUBROUTINE check_parameters
2
3	!------------------------------------------------------------------------------!
4	! Current revisions:
5	! -----------------
6	!
7	!
8	! Former revisions:
9	! -----------------
10	! $Id: check_parameters.f90 810 2012-01-30 13:40:12Z maronga $
11	!
12	! 809 2012-01-30 13:32:58Z maronga
13	! Bugfix: replaced .AND. and .NOT. with && and ! in the preprocessor directives
14	!
15	! 807 2012-01-25 11:53:51Z maronga
16	! New cpp directive "__check" implemented which is used by check_namelist_files
17	!
18	! 774 2011-10-27 13:34:16Z letzel
19	! bugfix for prescribed u,v-profiles
20	!
21	! 767 2011-10-14 06:39:12Z raasch
22	! Calculating u,v-profiles from given profiles by linear interpolation.
23	! bugfix: dirichlet_0 conditions for ug/vg moved from init_3d_model to here
24	!
25	! 707 2011-03-29 11:39:40Z raasch
26	! setting of bc_lr/ns_dirrad/raddir
27	!
28	! 689 2011-02-20 19:31:12z gryschka
29	! Bugfix for some logical expressions
30	! (syntax was not compatible with all compilers)
31	!
32	! 680 2011-02-04 23:16:06Z gryschka
33	! init_vortex is not allowed with volume_flow_control
34	!
35	! 673 2011-01-18 16:19:48Z suehring
36	! Declaration of ws_scheme_sca and ws_scheme_mom added (moved from advec_ws).
37	!
38	! 667 2010-12-23 12:06:00Z suehring/gryschka
39	! Exchange of parameters between ocean and atmosphere via PE0
40	! Check for illegal combination of ws-scheme and timestep scheme.
41	! Check for topography and ws-scheme.
42	! Check for not cyclic boundary conditions in combination with ws-scheme and
43	! loop_optimization = 'vector'.
44	! Check for call_psolver_at_all_substeps and ws-scheme for momentum_advec.
45	! Different processor/grid topology in atmosphere and ocean is now allowed!
46	! Bugfixes in checking for conserve_volume_flow_mode
47	! 600 2010-11-24 16:10:51Z raasch
48	! change due to new default value of surface_waterflux
49	! 580 2010-10-05 13:59:11Z heinze
50	! renaming of ws_vertical_gradient_level to subs_vertical_gradient_level
51	!
52	! 567 2010-10-01 10:46:30Z helmke
53	! calculating masks changed
54	!
55	! 564 2010-09-30 13:18:59Z helmke
56	! palm message identifiers of masked output changed, 20 replaced by max_masks
57	!
58	! 553 2010-09-01 14:09:06Z weinreis
59	! masks is calculated and removed from inipar
60	!
61	! 531 2010-04-21 06:47:21Z heinze
62	! Bugfix: unit of hyp changed to dbar
63	!
64	! 524 2010-03-30 02:04:51Z raasch
65	! Bugfix: "/" in netcdf profile variable names replaced by ":"
66	!
67	! 493 2010-03-01 08:30:24Z raasch
68	! netcdf_data_format is checked
69	!
70	! 411 2009-12-11 14:15:58Z heinze
71	! Enabled passive scalar/humidity wall fluxes for non-flat topography
72	! Initialization of large scale vertical motion (subsidence/ascent)
73	!
74	! 410 2009-12-04 17:05:40Z letzel
75	! masked data output
76	!
77	! 388 2009-09-23 09:40:33Z raasch
78	! Check profiles fpr prho and hyp.
79	! Bugfix: output of averaged 2d/3d quantities requires that an avaraging
80	! interval has been set, respective error message is included
81	! bc_lr_cyc and bc_ns_cyc are set,
82	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
83	! Check for illegal entries in section_xy\|xz\|yz that exceed nz+1\|ny+1\|nx+1
84	! Coupling with independent precursor runs.
85	! Check particle_color, particle_dvrpsize, color_interval, dvrpsize_interval
86	! Bugfix: pressure included for profile output
87	! Check pressure gradient conditions
88	! topography_grid_convention moved from user_check_parameters
89	! 'single_street_canyon'
90	! Added shf* and qsws* to the list of available output data
91	!
92	! 222 2009-01-12 16:04:16Z letzel
93	! +user_check_parameters
94	! Output of messages replaced by message handling routine.
95	! Implementation of an MPI-1 coupling: replaced myid with target_id,
96	! deleted __mpi2 directives
97	! Check that PALM is called with mrun -K parallel for coupling
98	!
99	! 197 2008-09-16 15:29:03Z raasch
100	! Bug fix: Construction of vertical profiles when 10 gradients have been
101	! specified in the parameter list (ug, vg, pt, q, sa, lad)
102	!
103	! Strict grid matching along z is not needed for mg-solver.
104	! Leaf area density (LAD) explicitly set to its surface value at k=0
105	! Case of reading data for recycling included in initializing_actions,
106	! check of turbulent_inflow and calculation of recycling_plane.
107	! q*2 profile added
108	!
109	! 138 2007-11-28 10:03:58Z letzel
110	! Plant canopy added
111	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
112	! Multigrid solver allows topography, checking of dt_sort_particles
113	! Bugfix: initializing u_init and v_init in case of ocean runs
114	!
115	! 109 2007-08-28 15:26:47Z letzel
116	! Check coupling_mode and set default (obligatory) values (like boundary
117	! conditions for temperature and fluxes) in case of coupled runs.
118	! +profiles for wp and w"e
119	! Bugfix: Error message concerning output of particle concentration (pc)
120	! modified
121	! More checks and more default values for coupled runs
122	! allow data_output_pr= q, wq, w"q", wq for humidity = .T. (instead of
123	! cloud_physics = .T.)
124	! Rayleigh damping for ocean fixed.
125	! Check and, if necessary, set default value for dt_coupling
126	!
127	! 97 2007-06-21 08:23:15Z raasch
128	! Initial salinity profile is calculated, salinity boundary conditions are
129	! checked,
130	! z_max_do1d is checked only in case of ocean = .f.,
131	! +initial temperature and geostrophic velocity profiles for the ocean version,
132	! use_pt_reference renamed use_reference
133	!
134	! 89 2007-05-25 12:08:31Z raasch
135	! Check for user-defined profiles
136	!
137	! 75 2007-03-22 09:54:05Z raasch
138	! "by_user" allowed as initializing action, -data_output_ts,
139	! leapfrog with non-flat topography not allowed any more, loop_optimization
140	! and pt_reference are checked, moisture renamed humidity,
141	! output of precipitation amount/rate and roughnes length + check
142	! possible negative humidities are avoided in initial profile,
143	! dirichlet/neumann changed to dirichlet/radiation, etc.,
144	! revision added to run_description_header
145	!
146	! 20 2007-02-26 00:12:32Z raasch
147	! Temperature and humidity gradients at top are now calculated for nzt+1,
148	! top_heatflux and respective boundary condition bc_pt_t is checked
149	!
150	! RCS Log replace by Id keyword, revision history cleaned up
151	!
152	! Revision 1.61 2006/08/04 14:20:25 raasch
153	! do2d_unit and do3d_unit now defined as 2d-arrays, check of
154	! use_upstream_for_tke, default value for dt_dopts,
155	! generation of file header moved from routines palm and header to here
156	!
157	! Revision 1.1 1997/08/26 06:29:23 raasch
158	! Initial revision
159	!
160	!
161	! Description:
162	! ------------
163	! Check control parameters and deduce further quantities.
164	!------------------------------------------------------------------------------!
165
166	USE arrays_3d
167	USE constants
168	USE control_parameters
169	USE dvrp_variables
170	USE grid_variables
171	USE indices
172	USE model_1d
173	USE netcdf_control
174	USE particle_attributes
175	USE pegrid
176	USE profil_parameter
177	USE subsidence_mod
178	USE statistics
179	USE transpose_indices
180
181	IMPLICIT NONE
182
183	CHARACTER (LEN=1) :: sq
184	CHARACTER (LEN=6) :: var
185	CHARACTER (LEN=7) :: unit
186	CHARACTER (LEN=8) :: date
187	CHARACTER (LEN=10) :: time
188	CHARACTER (LEN=40) :: coupling_string
189	CHARACTER (LEN=100) :: action
190
191	INTEGER :: i, ilen, intervals, iremote = 0, iter, j, k, kk, nnxh, nnyh, &
192	position, prec
193	LOGICAL :: found, ldum
194	REAL :: gradient, maxn, maxp, remote = 0.0, &
195	simulation_time_since_reference
196
197	!
198	!-- Warning, if host is not set
199	IF ( host(1:1) == ' ' ) THEN
200	message_string = '"host" is not set. Please check that environment ' // &
201	'variable "localhost" & is set before running PALM'
202	CALL message( 'check_parameters', 'PA0001', 0, 0, 0, 6, 0 )
203	ENDIF
204
205	!
206	!-- Check the coupling mode
207	IF ( coupling_mode /= 'uncoupled' .AND. &
208	coupling_mode /= 'atmosphere_to_ocean' .AND. &
209	coupling_mode /= 'ocean_to_atmosphere' ) THEN
210	message_string = 'illegal coupling mode: ' // TRIM( coupling_mode )
211	CALL message( 'check_parameters', 'PA0002', 1, 2, 0, 6, 0 )
212	ENDIF
213
214	!
215	!-- Check dt_coupling, restart_time, dt_restart, end_time, dx, dy, nx and ny
216	IF ( coupling_mode /= 'uncoupled') THEN
217
218	IF ( dt_coupling == 9999999.9 ) THEN
219	message_string = 'dt_coupling is not set but required for coup' // &
220	'ling mode "' // TRIM( coupling_mode ) // '"'
221	CALL message( 'check_parameters', 'PA0003', 1, 2, 0, 6, 0 )
222	ENDIF
223
224	#if defined( __parallel )
225
226	#if defined( __check )
227
228	!
229	!-- NOTE: coupled runs have not been implemented in the check_namelist_files
230	!-- program.
231	!-- check_namelist_files will need the following information of the other
232	!-- model (atmosphere/ocean).
233	dt_coupling = remote
234	dt_max = remote
235	restart_time = remote
236	dt_restart= remote
237	simulation_time_since_reference = remote
238	dx = remote
239
240	#endif
241
242	#if ! defined( __check )
243	IF ( myid == 0 ) THEN
244	CALL MPI_SEND( dt_coupling, 1, MPI_REAL, target_id, 11, comm_inter, &
245	ierr )
246	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 11, comm_inter, &
247	status, ierr )
248	ENDIF
249	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
250	#endif
251	IF ( dt_coupling /= remote ) THEN
252	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
253	'": dt_coupling = ', dt_coupling, '& is not equal to ', &
254	'dt_coupling_remote = ', remote
255	CALL message( 'check_parameters', 'PA0004', 1, 2, 0, 6, 0 )
256	ENDIF
257	IF ( dt_coupling <= 0.0 ) THEN
258	#if ! defined( __check )
259	IF ( myid == 0 ) THEN
260	CALL MPI_SEND( dt_max, 1, MPI_REAL, target_id, 19, comm_inter, ierr )
261	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 19, comm_inter, &
262	status, ierr )
263	ENDIF
264	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
265	#endif
266	dt_coupling = MAX( dt_max, remote )
267	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
268	'": dt_coupling <= 0.0 & is not allowed and is reset to ', &
269	'MAX(dt_max(A,O)) = ', dt_coupling
270	CALL message( 'check_parameters', 'PA0005', 0, 1, 0, 6, 0 )
271	ENDIF
272	#if ! defined( __check )
273	IF ( myid == 0 ) THEN
274	CALL MPI_SEND( restart_time, 1, MPI_REAL, target_id, 12, comm_inter, &
275	ierr )
276	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 12, comm_inter, &
277	status, ierr )
278	ENDIF
279	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
280	#endif
281	IF ( restart_time /= remote ) THEN
282	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
283	'": restart_time = ', restart_time, '& is not equal to ', &
284	'restart_time_remote = ', remote
285	CALL message( 'check_parameters', 'PA0006', 1, 2, 0, 6, 0 )
286	ENDIF
287	#if ! defined( __check )
288	IF ( myid == 0 ) THEN
289	CALL MPI_SEND( dt_restart, 1, MPI_REAL, target_id, 13, comm_inter, &
290	ierr )
291	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 13, comm_inter, &
292	status, ierr )
293	ENDIF
294	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
295	#endif
296	IF ( dt_restart /= remote ) THEN
297	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
298	'": dt_restart = ', dt_restart, '& is not equal to ', &
299	'dt_restart_remote = ', remote
300	CALL message( 'check_parameters', 'PA0007', 1, 2, 0, 6, 0 )
301	ENDIF
302
303	simulation_time_since_reference = end_time - coupling_start_time
304	#if ! defined( __check )
305	IF ( myid == 0 ) THEN
306	CALL MPI_SEND( simulation_time_since_reference, 1, MPI_REAL, target_id, &
307	14, comm_inter, ierr )
308	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 14, comm_inter, &
309	status, ierr )
310	ENDIF
311	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
312	#endif
313	IF ( simulation_time_since_reference /= remote ) THEN
314	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
315	'": simulation_time_since_reference = ', &
316	simulation_time_since_reference, '& is not equal to ', &
317	'simulation_time_since_reference_remote = ', remote
318	CALL message( 'check_parameters', 'PA0008', 1, 2, 0, 6, 0 )
319	ENDIF
320
321	#if ! defined( __check )
322	IF ( myid == 0 ) THEN
323	CALL MPI_SEND( dx, 1, MPI_REAL, target_id, 15, comm_inter, ierr )
324	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 15, comm_inter, &
325	status, ierr )
326	ENDIF
327	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
328
329	#endif
330	IF ( coupling_mode == 'atmosphere_to_ocean') THEN
331
332	IF ( dx < remote ) THEN
333	WRITE( message_string, * ) 'coupling mode "', &
334	TRIM( coupling_mode ), &
335	'": dx in Atmosphere is not equal to or not larger then dx in ocean'
336	CALL message( 'check_parameters', 'PA0009', 1, 2, 0, 6, 0 )
337	ENDIF
338
339	IF ( (nx_a+1)dx /= (nx_o+1)remote ) THEN
340	WRITE( message_string, * ) 'coupling mode "', &
341	TRIM( coupling_mode ), &
342	'": Domain size in x-direction is not equal in ocean and atmosphere'
343	CALL message( 'check_parameters', 'PA0010', 1, 2, 0, 6, 0 )
344	ENDIF
345
346	ENDIF
347
348	#if ! defined( __check )
349	IF ( myid == 0) THEN
350	CALL MPI_SEND( dy, 1, MPI_REAL, target_id, 16, comm_inter, ierr )
351	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 16, comm_inter, &
352	status, ierr )
353	ENDIF
354	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
355	#endif
356	IF ( coupling_mode == 'atmosphere_to_ocean') THEN
357
358	IF ( dy < remote ) THEN
359	WRITE( message_string, * ) 'coupling mode "', &
360	TRIM( coupling_mode ), &
361	'": dy in Atmosphere is not equal to or not larger then dy in ocean'
362	CALL message( 'check_parameters', 'PA0011', 1, 2, 0, 6, 0 )
363	ENDIF
364
365	IF ( (ny_a+1)dy /= (ny_o+1)remote ) THEN
366	WRITE( message_string, * ) 'coupling mode "', &
367	TRIM( coupling_mode ), &
368	'": Domain size in y-direction is not equal in ocean and atmosphere'
369	CALL message( 'check_parameters', 'PA0012', 1, 2, 0, 6, 0 )
370	ENDIF
371
372	IF ( MOD(nx_o+1,nx_a+1) /= 0 ) THEN
373	WRITE( message_string, * ) 'coupling mode "', &
374	TRIM( coupling_mode ), &
375	'": nx+1 in ocean is not divisible without remainder with nx+1 in', &
376	' atmosphere'
377	CALL message( 'check_parameters', 'PA0339', 1, 2, 0, 6, 0 )
378	ENDIF
379
380	IF ( MOD(ny_o+1,ny_a+1) /= 0 ) THEN
381	WRITE( message_string, * ) 'coupling mode "', &
382	TRIM( coupling_mode ), &
383	'": ny+1 in ocean is not divisible without remainder with ny+1 in', &
384	' atmosphere'
385	CALL message( 'check_parameters', 'PA0340', 1, 2, 0, 6, 0 )
386	ENDIF
387
388	ENDIF
389	#else
390	WRITE( message_string, * ) 'coupling requires PALM to be called with', &
391	' ''mrun -K parallel'''
392	CALL message( 'check_parameters', 'PA0141', 1, 2, 0, 6, 0 )
393	#endif
394	ENDIF
395
396	#if defined( __parallel ) && ! defined ( __check )
397	!
398	!-- Exchange via intercommunicator
399	IF ( coupling_mode == 'atmosphere_to_ocean' .AND. myid == 0 ) THEN
400	CALL MPI_SEND( humidity, 1, MPI_LOGICAL, target_id, 19, comm_inter, &
401	ierr )
402	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' .AND. myid == 0) THEN
403	CALL MPI_RECV( humidity_remote, 1, MPI_LOGICAL, target_id, 19, &
404	comm_inter, status, ierr )
405	ENDIF
406	CALL MPI_BCAST( humidity_remote, 1, MPI_LOGICAL, 0, comm2d, ierr)
407
408	#endif
409
410
411	!
412	!-- Generate the file header which is used as a header for most of PALM's
413	!-- output files
414	CALL DATE_AND_TIME( date, time )
415	run_date = date(7:8)//'-'//date(5:6)//'-'//date(3:4)
416	run_time = time(1:2)//':'//time(3:4)//':'//time(5:6)
417	IF ( coupling_mode == 'uncoupled' ) THEN
418	coupling_string = ''
419	ELSEIF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
420	coupling_string = ' coupled (atmosphere)'
421	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
422	coupling_string = ' coupled (ocean)'
423	ENDIF
424
425	WRITE ( run_description_header, &
426	'(A,2X,A,2X,A,A,A,I2.2,A,2X,A,A,2X,A,1X,A)' ) &
427	TRIM( version ), TRIM( revision ), 'run: ', &
428	TRIM( run_identifier ), '.', runnr, TRIM( coupling_string ), &
429	'host: ', TRIM( host ), run_date, run_time
430
431	!
432	!-- Check the general loop optimization method
433	IF ( loop_optimization == 'default' ) THEN
434	IF ( host(1:3) == 'nec' ) THEN
435	loop_optimization = 'vector'
436	ELSE
437	loop_optimization = 'cache'
438	ENDIF
439	ENDIF
440	IF ( loop_optimization /= 'noopt' .AND. loop_optimization /= 'cache' &
441	.AND. loop_optimization /= 'vector' ) THEN
442	message_string = 'illegal value given for loop_optimization: "' // &
443	TRIM( loop_optimization ) // '"'
444	CALL message( 'check_parameters', 'PA0013', 1, 2, 0, 6, 0 )
445	ENDIF
446
447	!
448	!-- Check topography setting (check for illegal parameter combinations)
449	IF ( topography /= 'flat' ) THEN
450	action = ' '
451	IF ( scalar_advec /= 'pw-scheme' ) THEN
452	WRITE( action, '(A,A)' ) 'scalar_advec = ', scalar_advec
453	ENDIF
454	IF ( momentum_advec /= 'pw-scheme' ) THEN
455	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
456	ENDIF
457	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
458	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
459	ENDIF
460	IF ( psolver == 'sor' ) THEN
461	WRITE( action, '(A,A)' ) 'psolver = ', psolver
462	ENDIF
463	IF ( sloping_surface ) THEN
464	WRITE( action, '(A)' ) 'sloping surface = .TRUE.'
465	ENDIF
466	IF ( galilei_transformation ) THEN
467	WRITE( action, '(A)' ) 'galilei_transformation = .TRUE.'
468	ENDIF
469	IF ( cloud_physics ) THEN
470	WRITE( action, '(A)' ) 'cloud_physics = .TRUE.'
471	ENDIF
472	IF ( cloud_droplets ) THEN
473	WRITE( action, '(A)' ) 'cloud_droplets = .TRUE.'
474	ENDIF
475	IF ( .NOT. prandtl_layer ) THEN
476	WRITE( action, '(A)' ) 'prandtl_layer = .FALSE.'
477	ENDIF
478	IF ( action /= ' ' ) THEN
479	message_string = 'a non-flat topography does not allow ' // &
480	TRIM( action )
481	CALL message( 'check_parameters', 'PA0014', 1, 2, 0, 6, 0 )
482	ENDIF
483	IF ( momentum_advec == 'ws-scheme' .OR. scalar_advec == 'ws-scheme' ) &
484	THEN
485	message_string = 'topography is still not allowed with ' // &
486	'momentum_advec = "' // TRIM( momentum_advec ) // &
487	'"or scalar_advec = "' // TRIM( scalar_advec ) //'"'
488	! message number still needs modification
489	CALL message( 'check_parameters', 'PA0341', 1, 2, 0, 6, 0 )
490	END IF
491
492	!
493	!-- In case of non-flat topography, check whether the convention how to
494	!-- define the topography grid has been set correctly, or whether the default
495	!-- is applicable. If this is not possible, abort.
496	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
497	IF ( TRIM( topography ) /= 'single_building' .AND. &
498	TRIM( topography ) /= 'single_street_canyon' .AND. &
499	TRIM( topography ) /= 'read_from_file' ) THEN
500	!-- The default value is not applicable here, because it is only valid
501	!-- for the two standard cases 'single_building' and 'read_from_file'
502	!-- defined in init_grid.
503	WRITE( message_string, * ) &
504	'The value for "topography_grid_convention" ', &
505	'is not set. Its default value is & only valid for ', &
506	'"topography" = ''single_building'', ', &
507	'''single_street_canyon'' & or ''read_from_file''.', &
508	' & Choose ''cell_edge'' or ''cell_center''.'
509	CALL message( 'user_check_parameters', 'PA0239', 1, 2, 0, 6, 0 )
510	ELSE
511	!-- The default value is applicable here.
512	!-- Set convention according to topography.
513	IF ( TRIM( topography ) == 'single_building' .OR. &
514	TRIM( topography ) == 'single_street_canyon' ) THEN
515	topography_grid_convention = 'cell_edge'
516	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
517	topography_grid_convention = 'cell_center'
518	ENDIF
519	ENDIF
520	ELSEIF ( TRIM( topography_grid_convention ) /= 'cell_edge' .AND. &
521	TRIM( topography_grid_convention ) /= 'cell_center' ) THEN
522	WRITE( message_string, * ) &
523	'The value for "topography_grid_convention" is ', &
524	'not recognized. & Choose ''cell_edge'' or ''cell_center''.'
525	CALL message( 'user_check_parameters', 'PA0240', 1, 2, 0, 6, 0 )
526	ENDIF
527
528	ENDIF
529
530	!
531	!-- Check ocean setting
532	IF ( ocean ) THEN
533
534	action = ' '
535	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
536	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
537	ENDIF
538	IF ( momentum_advec == 'ups-scheme' ) THEN
539	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
540	ENDIF
541	IF ( action /= ' ' ) THEN
542	message_string = 'ocean = .T. does not allow ' // TRIM( action )
543	CALL message( 'check_parameters', 'PA0015', 1, 2, 0, 6, 0 )
544	ENDIF
545
546	ELSEIF ( TRIM( coupling_mode ) == 'uncoupled' .AND. &
547	TRIM( coupling_char ) == '_O' ) THEN
548
549	!
550	!-- Check whether an (uncoupled) atmospheric run has been declared as an
551	!-- ocean run (this setting is done via mrun-option -y)
552
553	message_string = 'ocean = .F. does not allow coupling_char = "' // &
554	TRIM( coupling_char ) // '" set by mrun-option "-y"'
555	CALL message( 'check_parameters', 'PA0317', 1, 2, 0, 6, 0 )
556
557	ENDIF
558
559	!
560	!-- Check whether there are any illegal values
561	!-- Pressure solver:
562	IF ( psolver /= 'poisfft' .AND. psolver /= 'poisfft_hybrid' .AND. &
563	psolver /= 'sor' .AND. psolver /= 'multigrid' ) THEN
564	message_string = 'unknown solver for perturbation pressure: psolver' // &
565	' = "' // TRIM( psolver ) // '"'
566	CALL message( 'check_parameters', 'PA0016', 1, 2, 0, 6, 0 )
567	ENDIF
568
569	#if defined( __parallel )
570	IF ( psolver == 'poisfft_hybrid' .AND. pdims(2) /= 1 ) THEN
571	message_string = 'psolver = "' // TRIM( psolver ) // '" only works ' // &
572	'for a 1d domain-decomposition along x & please do' // &
573	' not set npey/=1 in the parameter file'
574	CALL message( 'check_parameters', 'PA0017', 1, 2, 0, 6, 0 )
575	ENDIF
576	IF ( psolver == 'poisfft_hybrid' .AND. &
577	( nxra > nxr .OR. nyna > nyn .OR. nza > nz ) .OR. &
578	psolver == 'multigrid' .AND. &
579	( nxra > nxr .OR. nyna > nyn ) ) THEN
580	message_string = 'psolver = "' // TRIM( psolver ) // '" does not ' // &
581	'work for subdomains with unequal size & please ' // &
582	'set grid_matching = ''strict'' in the parameter file'
583	CALL message( 'check_parameters', 'PA0018', 1, 2, 0, 6, 0 )
584	ENDIF
585	#else
586	IF ( psolver == 'poisfft_hybrid' ) THEN
587	message_string = 'psolver = "' // TRIM( psolver ) // '" only works' // &
588	' for a parallel environment'
589	CALL message( 'check_parameters', 'PA0019', 1, 2, 0, 6, 0 )
590	ENDIF
591	#endif
592
593	IF ( psolver == 'multigrid' ) THEN
594	IF ( cycle_mg == 'w' ) THEN
595	gamma_mg = 2
596	ELSEIF ( cycle_mg == 'v' ) THEN
597	gamma_mg = 1
598	ELSE
599	message_string = 'unknown multigrid cycle: cycle_mg = "' // &
600	TRIM( cycle_mg ) // '"'
601	CALL message( 'check_parameters', 'PA0020', 1, 2, 0, 6, 0 )
602	ENDIF
603	ENDIF
604
605	IF ( fft_method /= 'singleton-algorithm' .AND. &
606	fft_method /= 'temperton-algorithm' .AND. &
607	fft_method /= 'system-specific' ) THEN
608	message_string = 'unknown fft-algorithm: fft_method = "' // &
609	TRIM( fft_method ) // '"'
610	CALL message( 'check_parameters', 'PA0021', 1, 2, 0, 6, 0 )
611	ENDIF
612
613	IF( momentum_advec == 'ws-scheme' .AND. &
614	.NOT. call_psolver_at_all_substeps ) THEN
615	message_string = 'psolver must be called at each RK3 substep when "'//&
616	TRIM(momentum_advec) // ' "is used for momentum_advec'
617	CALL message( 'check_parameters', 'PA0344', 1, 2, 0, 6, 0 )
618	END IF
619	!
620	!-- Advection schemes:
621	!
622	!-- Set the LOGICALS to enhance the performance.
623	IF ( momentum_advec == 'ws-scheme' ) ws_scheme_mom = .TRUE.
624	IF ( scalar_advec == 'ws-scheme' ) ws_scheme_sca = .TRUE.
625
626	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme' .AND. &
627	momentum_advec /= 'ups-scheme' ) THEN
628	message_string = 'unknown advection scheme: momentum_advec = "' // &
629	TRIM( momentum_advec ) // '"'
630	CALL message( 'check_parameters', 'PA0022', 1, 2, 0, 6, 0 )
631	ENDIF
632	IF ((( momentum_advec == 'ups-scheme' .OR. scalar_advec == 'ups-scheme' )&
633	.AND. timestep_scheme /= 'euler' ) .OR. (( momentum_advec == 'ws-scheme'&
634	.OR. scalar_advec == 'ws-scheme') .AND. (timestep_scheme == 'euler' .OR. &
635	timestep_scheme == 'leapfrog+euler' .OR. timestep_scheme == 'leapfrog' &
636	.OR. timestep_scheme == 'runge-kutta-2'))) THEN
637	message_string = 'momentum_advec or scalar_advec = "' &
638	// TRIM( momentum_advec ) // '" is not allowed with timestep_scheme = "' // &
639	TRIM( timestep_scheme ) // '"'
640	CALL message( 'check_parameters', 'PA0023', 1, 2, 0, 6, 0 )
641	ENDIF
642	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'ws-scheme' .AND. &
643	scalar_advec /= 'bc-scheme' .AND. scalar_advec /= 'ups-scheme' ) THEN
644	message_string = 'unknown advection scheme: scalar_advec = "' // &
645	TRIM( scalar_advec ) // '"'
646	CALL message( 'check_parameters', 'PA0024', 1, 2, 0, 6, 0 )
647	ENDIF
648
649	IF ( use_sgs_for_particles .AND. .NOT. use_upstream_for_tke ) THEN
650	use_upstream_for_tke = .TRUE.
651	message_string = 'use_upstream_for_tke set .TRUE. because ' // &
652	'use_sgs_for_particles = .TRUE.'
653	CALL message( 'check_parameters', 'PA0025', 0, 1, 0, 6, 0 )
654	ENDIF
655
656	IF ( use_upstream_for_tke .AND. timestep_scheme(1:8) == 'leapfrog' ) THEN
657	message_string = 'use_upstream_for_tke = .TRUE. not allowed with ' // &
658	'timestep_scheme = "' // TRIM( timestep_scheme ) // '"'
659	CALL message( 'check_parameters', 'PA0026', 1, 2, 0, 6, 0 )
660	ENDIF
661
662	!
663	!-- Timestep schemes:
664	SELECT CASE ( TRIM( timestep_scheme ) )
665
666	CASE ( 'euler' )
667	intermediate_timestep_count_max = 1
668	asselin_filter_factor = 0.0
669
670	CASE ( 'leapfrog', 'leapfrog+euler' )
671	intermediate_timestep_count_max = 1
672
673	CASE ( 'runge-kutta-2' )
674	intermediate_timestep_count_max = 2
675	asselin_filter_factor = 0.0
676
677	CASE ( 'runge-kutta-3' )
678	intermediate_timestep_count_max = 3
679	asselin_filter_factor = 0.0
680
681	CASE DEFAULT
682	message_string = 'unknown timestep scheme: timestep_scheme = "' // &
683	TRIM( timestep_scheme ) // '"'
684	CALL message( 'check_parameters', 'PA0027', 1, 2, 0, 6, 0 )
685
686	END SELECT
687
688	IF ( scalar_advec == 'ups-scheme' .AND. timestep_scheme(1:5) == 'runge' )&
689	THEN
690	message_string = 'scalar advection scheme "' // TRIM( scalar_advec ) // &
691	'" & does not work with timestep_scheme "' // &
692	TRIM( timestep_scheme ) // '"'
693	CALL message( 'check_parameters', 'PA0028', 1, 2, 0, 6, 0 )
694	ENDIF
695
696	IF ( (momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme') &
697	.AND. timestep_scheme(1:5) == 'runge' ) THEN
698	message_string = 'momentum advection scheme "' // &
699	TRIM( momentum_advec ) // '" & does not work with ' // &
700	'timestep_scheme "' // TRIM( timestep_scheme ) // '"'
701	CALL message( 'check_parameters', 'PA0029', 1, 2, 0, 6, 0 )
702	ENDIF
703
704	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
705	TRIM( initializing_actions ) /= 'cyclic_fill' ) THEN
706	!
707	!-- No restart run: several initialising actions are possible
708	action = initializing_actions
709	DO WHILE ( TRIM( action ) /= '' )
710	position = INDEX( action, ' ' )
711	SELECT CASE ( action(1:position-1) )
712
713	CASE ( 'set_constant_profiles', 'set_1d-model_profiles', &
714	'by_user', 'initialize_vortex', 'initialize_ptanom' )
715	action = action(position+1:)
716
717	CASE DEFAULT
718	message_string = 'initializing_action = "' // &
719	TRIM( action ) // '" unkown or not allowed'
720	CALL message( 'check_parameters', 'PA0030', 1, 2, 0, 6, 0 )
721
722	END SELECT
723	ENDDO
724	ENDIF
725
726	IF ( TRIM( initializing_actions ) == 'initialize_vortex' .AND. &
727	conserve_volume_flow ) THEN
728	message_string = 'initializing_actions = "initialize_vortex"' // &
729	' ist not allowed with conserve_volume_flow = .T.'
730	CALL message( 'check_parameters', 'PA0343', 1, 2, 0, 6, 0 )
731	ENDIF
732
733
734	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
735	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
736	message_string = 'initializing_actions = "set_constant_profiles"' // &
737	' and "set_1d-model_profiles" are not allowed ' // &
738	'simultaneously'
739	CALL message( 'check_parameters', 'PA0031', 1, 2, 0, 6, 0 )
740	ENDIF
741
742	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
743	INDEX( initializing_actions, 'by_user' ) /= 0 ) THEN
744	message_string = 'initializing_actions = "set_constant_profiles"' // &
745	' and "by_user" are not allowed simultaneously'
746	CALL message( 'check_parameters', 'PA0032', 1, 2, 0, 6, 0 )
747	ENDIF
748
749	IF ( INDEX( initializing_actions, 'by_user' ) /= 0 .AND. &
750	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
751	message_string = 'initializing_actions = "by_user" and ' // &
752	'"set_1d-model_profiles" are not allowed simultaneously'
753	CALL message( 'check_parameters', 'PA0033', 1, 2, 0, 6, 0 )
754	ENDIF
755
756	IF ( cloud_physics .AND. .NOT. humidity ) THEN
757	WRITE( message_string, * ) 'cloud_physics = ', cloud_physics, ' is ', &
758	'not allowed with humidity = ', humidity
759	CALL message( 'check_parameters', 'PA0034', 1, 2, 0, 6, 0 )
760	ENDIF
761
762	IF ( precipitation .AND. .NOT. cloud_physics ) THEN
763	WRITE( message_string, * ) 'precipitation = ', precipitation, ' is ', &
764	'not allowed with cloud_physics = ', cloud_physics
765	CALL message( 'check_parameters', 'PA0035', 1, 2, 0, 6, 0 )
766	ENDIF
767
768	IF ( humidity .AND. sloping_surface ) THEN
769	message_string = 'humidity = .TRUE. and sloping_surface = .TRUE. ' // &
770	'are not allowed simultaneously'
771	CALL message( 'check_parameters', 'PA0036', 1, 2, 0, 6, 0 )
772	ENDIF
773
774	IF ( humidity .AND. scalar_advec == 'ups-scheme' ) THEN
775	message_string = 'UPS-scheme is not implemented for humidity = .TRUE.'
776	CALL message( 'check_parameters', 'PA0037', 1, 2, 0, 6, 0 )
777	ENDIF
778
779	IF ( passive_scalar .AND. humidity ) THEN
780	message_string = 'humidity = .TRUE. and passive_scalar = .TRUE. ' // &
781	'is not allowed simultaneously'
782	CALL message( 'check_parameters', 'PA0038', 1, 2, 0, 6, 0 )
783	ENDIF
784
785	IF ( passive_scalar .AND. scalar_advec == 'ups-scheme' ) THEN
786	message_string = 'UPS-scheme is not implemented for passive_scalar' // &
787	' = .TRUE.'
788	CALL message( 'check_parameters', 'PA0039', 1, 2, 0, 6, 0 )
789	ENDIF
790
791	IF ( grid_matching /= 'strict' .AND. grid_matching /= 'match' ) THEN
792	message_string = 'illegal value "' // TRIM( grid_matching ) // &
793	'" found for parameter grid_matching'
794	CALL message( 'check_parameters', 'PA0040', 1, 2, 0, 6, 0 )
795	ENDIF
796
797	IF ( plant_canopy .AND. ( drag_coefficient == 0.0 ) ) THEN
798	message_string = 'plant_canopy = .TRUE. requires a non-zero drag ' // &
799	'coefficient & given value is drag_coefficient = 0.0'
800	CALL message( 'check_parameters', 'PA0041', 1, 2, 0, 6, 0 )
801	ENDIF
802
803	!
804	!-- In case of no model continuation run, check initialising parameters and
805	!-- deduce further quantities
806	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
807
808	!
809	!-- Initial profiles for 1D and 3D model, respectively (u,v further below)
810	pt_init = pt_surface
811	IF ( humidity ) q_init = q_surface
812	IF ( ocean ) sa_init = sa_surface
813	IF ( passive_scalar ) q_init = s_surface
814	IF ( plant_canopy ) lad = 0.0
815
816	!
817	!--
818	!-- If required, compute initial profile of the geostrophic wind
819	!-- (component ug)
820	i = 1
821	gradient = 0.0
822
823	IF ( .NOT. ocean ) THEN
824
825	ug_vertical_gradient_level_ind(1) = 0
826	ug(0) = ug_surface
827	DO k = 1, nzt+1
828	IF ( i < 11 ) THEN
829	IF ( ug_vertical_gradient_level(i) < zu(k) .AND. &
830	ug_vertical_gradient_level(i) >= 0.0 ) THEN
831	gradient = ug_vertical_gradient(i) / 100.0
832	ug_vertical_gradient_level_ind(i) = k - 1
833	i = i + 1
834	ENDIF
835	ENDIF
836	IF ( gradient /= 0.0 ) THEN
837	IF ( k /= 1 ) THEN
838	ug(k) = ug(k-1) + dzu(k) * gradient
839	ELSE
840	ug(k) = ug_surface + 0.5 * dzu(k) * gradient
841	ENDIF
842	ELSE
843	ug(k) = ug(k-1)
844	ENDIF
845	ENDDO
846
847	ELSE
848
849	ug_vertical_gradient_level_ind(1) = nzt+1
850	ug(nzt+1) = ug_surface
851	DO k = nzt, nzb, -1
852	IF ( i < 11 ) THEN
853	IF ( ug_vertical_gradient_level(i) > zu(k) .AND. &
854	ug_vertical_gradient_level(i) <= 0.0 ) THEN
855	gradient = ug_vertical_gradient(i) / 100.0
856	ug_vertical_gradient_level_ind(i) = k + 1
857	i = i + 1
858	ENDIF
859	ENDIF
860	IF ( gradient /= 0.0 ) THEN
861	IF ( k /= nzt ) THEN
862	ug(k) = ug(k+1) - dzu(k+1) * gradient
863	ELSE
864	ug(k) = ug_surface - 0.5 * dzu(k+1) * gradient
865	ug(k+1) = ug_surface + 0.5 * dzu(k+1) * gradient
866	ENDIF
867	ELSE
868	ug(k) = ug(k+1)
869	ENDIF
870	ENDDO
871
872	ENDIF
873
874	!
875	!-- In case of no given gradients for ug, choose a zero gradient
876	IF ( ug_vertical_gradient_level(1) == -9999999.9 ) THEN
877	ug_vertical_gradient_level(1) = 0.0
878	ENDIF
879
880	!
881	!--
882	!-- If required, compute initial profile of the geostrophic wind
883	!-- (component vg)
884	i = 1
885	gradient = 0.0
886
887	IF ( .NOT. ocean ) THEN
888
889	vg_vertical_gradient_level_ind(1) = 0
890	vg(0) = vg_surface
891	DO k = 1, nzt+1
892	IF ( i < 11 ) THEN
893	IF ( vg_vertical_gradient_level(i) < zu(k) .AND. &
894	vg_vertical_gradient_level(i) >= 0.0 ) THEN
895	gradient = vg_vertical_gradient(i) / 100.0
896	vg_vertical_gradient_level_ind(i) = k - 1
897	i = i + 1
898	ENDIF
899	ENDIF
900	IF ( gradient /= 0.0 ) THEN
901	IF ( k /= 1 ) THEN
902	vg(k) = vg(k-1) + dzu(k) * gradient
903	ELSE
904	vg(k) = vg_surface + 0.5 * dzu(k) * gradient
905	ENDIF
906	ELSE
907	vg(k) = vg(k-1)
908	ENDIF
909	ENDDO
910
911	ELSE
912
913	vg_vertical_gradient_level_ind(1) = nzt+1
914	vg(nzt+1) = vg_surface
915	DO k = nzt, nzb, -1
916	IF ( i < 11 ) THEN
917	IF ( vg_vertical_gradient_level(i) > zu(k) .AND. &
918	vg_vertical_gradient_level(i) <= 0.0 ) THEN
919	gradient = vg_vertical_gradient(i) / 100.0
920	vg_vertical_gradient_level_ind(i) = k + 1
921	i = i + 1
922	ENDIF
923	ENDIF
924	IF ( gradient /= 0.0 ) THEN
925	IF ( k /= nzt ) THEN
926	vg(k) = vg(k+1) - dzu(k+1) * gradient
927	ELSE
928	vg(k) = vg_surface - 0.5 * dzu(k+1) * gradient
929	vg(k+1) = vg_surface + 0.5 * dzu(k+1) * gradient
930	ENDIF
931	ELSE
932	vg(k) = vg(k+1)
933	ENDIF
934	ENDDO
935
936	ENDIF
937
938	!
939	!-- In case of no given gradients for vg, choose a zero gradient
940	IF ( vg_vertical_gradient_level(1) == -9999999.9 ) THEN
941	vg_vertical_gradient_level(1) = 0.0
942	ENDIF
943
944	!
945	!-- Let the initial wind profiles be the calculated ug/vg profiles or
946	!-- interpolate them from wind profile data (if given)
947	IF ( u_profile(1) == 9999999.9 .AND. v_profile(1) == 9999999.9 ) THEN
948
949	u_init = ug
950	v_init = vg
951
952	ELSEIF ( u_profile(1) == 0.0 .AND. v_profile(1) == 0.0 ) THEN
953
954	IF ( uv_heights(1) /= 0.0 ) THEN
955	message_string = 'uv_heights(1) must be 0.0'
956	CALL message( 'check_parameters', 'PA0345', 1, 2, 0, 6, 0 )
957	ENDIF
958
959	use_prescribed_profile_data = .TRUE.
960
961	kk = 1
962	u_init(0) = 0.0
963	v_init(0) = 0.0
964
965	DO k = 1, nz+1
966
967	IF ( kk < 100 ) THEN
968	DO WHILE ( uv_heights(kk+1) <= zu(k) )
969	kk = kk + 1
970	IF ( kk == 100 ) EXIT
971	ENDDO
972	ENDIF
973
974	IF ( kk < 100 .AND. uv_heights(kk+1) /= 9999999.9 ) THEN
975	u_init(k) = u_profile(kk) + ( zu(k) - uv_heights(kk) ) / &
976	( uv_heights(kk+1) - uv_heights(kk) ) * &
977	( u_profile(kk+1) - u_profile(kk) )
978	v_init(k) = v_profile(kk) + ( zu(k) - uv_heights(kk) ) / &
979	( uv_heights(kk+1) - uv_heights(kk) ) * &
980	( v_profile(kk+1) - v_profile(kk) )
981	ELSE
982	u_init(k) = u_profile(kk)
983	v_init(k) = v_profile(kk)
984	ENDIF
985
986	ENDDO
987
988	ELSE
989
990	message_string = 'u_profile(1) and v_profile(1) must be 0.0'
991	CALL message( 'check_parameters', 'PA0346', 1, 2, 0, 6, 0 )
992
993	ENDIF
994
995	!
996	!-- Compute initial temperature profile using the given temperature gradients
997	i = 1
998	gradient = 0.0
999
1000	IF ( .NOT. ocean ) THEN
1001
1002	pt_vertical_gradient_level_ind(1) = 0
1003	DO k = 1, nzt+1
1004	IF ( i < 11 ) THEN
1005	IF ( pt_vertical_gradient_level(i) < zu(k) .AND. &
1006	pt_vertical_gradient_level(i) >= 0.0 ) THEN
1007	gradient = pt_vertical_gradient(i) / 100.0
1008	pt_vertical_gradient_level_ind(i) = k - 1
1009	i = i + 1
1010	ENDIF
1011	ENDIF
1012	IF ( gradient /= 0.0 ) THEN
1013	IF ( k /= 1 ) THEN
1014	pt_init(k) = pt_init(k-1) + dzu(k) * gradient
1015	ELSE
1016	pt_init(k) = pt_surface + 0.5 * dzu(k) * gradient
1017	ENDIF
1018	ELSE
1019	pt_init(k) = pt_init(k-1)
1020	ENDIF
1021	ENDDO
1022
1023	ELSE
1024
1025	pt_vertical_gradient_level_ind(1) = nzt+1
1026	DO k = nzt, 0, -1
1027	IF ( i < 11 ) THEN
1028	IF ( pt_vertical_gradient_level(i) > zu(k) .AND. &
1029	pt_vertical_gradient_level(i) <= 0.0 ) THEN
1030	gradient = pt_vertical_gradient(i) / 100.0
1031	pt_vertical_gradient_level_ind(i) = k + 1
1032	i = i + 1
1033	ENDIF
1034	ENDIF
1035	IF ( gradient /= 0.0 ) THEN
1036	IF ( k /= nzt ) THEN
1037	pt_init(k) = pt_init(k+1) - dzu(k+1) * gradient
1038	ELSE
1039	pt_init(k) = pt_surface - 0.5 * dzu(k+1) * gradient
1040	pt_init(k+1) = pt_surface + 0.5 * dzu(k+1) * gradient
1041	ENDIF
1042	ELSE
1043	pt_init(k) = pt_init(k+1)
1044	ENDIF
1045	ENDDO
1046
1047	ENDIF
1048
1049	!
1050	!-- In case of no given temperature gradients, choose gradient of neutral
1051	!-- stratification
1052	IF ( pt_vertical_gradient_level(1) == -9999999.9 ) THEN
1053	pt_vertical_gradient_level(1) = 0.0
1054	ENDIF
1055
1056	!
1057	!-- Store temperature gradient at the top boundary for possible Neumann
1058	!-- boundary condition
1059	bc_pt_t_val = ( pt_init(nzt+1) - pt_init(nzt) ) / dzu(nzt+1)
1060
1061	!
1062	!-- If required, compute initial humidity or scalar profile using the given
1063	!-- humidity/scalar gradient. In case of scalar transport, initially store
1064	!-- values of the scalar parameters on humidity parameters
1065	IF ( passive_scalar ) THEN
1066	bc_q_b = bc_s_b
1067	bc_q_t = bc_s_t
1068	q_surface = s_surface
1069	q_surface_initial_change = s_surface_initial_change
1070	q_vertical_gradient = s_vertical_gradient
1071	q_vertical_gradient_level = s_vertical_gradient_level
1072	surface_waterflux = surface_scalarflux
1073	wall_humidityflux = wall_scalarflux
1074	ENDIF
1075
1076	IF ( humidity .OR. passive_scalar ) THEN
1077
1078	i = 1
1079	gradient = 0.0
1080	q_vertical_gradient_level_ind(1) = 0
1081	DO k = 1, nzt+1
1082	IF ( i < 11 ) THEN
1083	IF ( q_vertical_gradient_level(i) < zu(k) .AND. &
1084	q_vertical_gradient_level(i) >= 0.0 ) THEN
1085	gradient = q_vertical_gradient(i) / 100.0
1086	q_vertical_gradient_level_ind(i) = k - 1
1087	i = i + 1
1088	ENDIF
1089	ENDIF
1090	IF ( gradient /= 0.0 ) THEN
1091	IF ( k /= 1 ) THEN
1092	q_init(k) = q_init(k-1) + dzu(k) * gradient
1093	ELSE
1094	q_init(k) = q_init(k-1) + 0.5 * dzu(k) * gradient
1095	ENDIF
1096	ELSE
1097	q_init(k) = q_init(k-1)
1098	ENDIF
1099	!
1100	!-- Avoid negative humidities
1101	IF ( q_init(k) < 0.0 ) THEN
1102	q_init(k) = 0.0
1103	ENDIF
1104	ENDDO
1105
1106	!
1107	!-- In case of no given humidity gradients, choose zero gradient
1108	!-- conditions
1109	IF ( q_vertical_gradient_level(1) == -1.0 ) THEN
1110	q_vertical_gradient_level(1) = 0.0
1111	ENDIF
1112
1113	!
1114	!-- Store humidity gradient at the top boundary for possile Neumann
1115	!-- boundary condition
1116	bc_q_t_val = ( q_init(nzt+1) - q_init(nzt) ) / dzu(nzt+1)
1117
1118	ENDIF
1119
1120	!
1121	!-- If required, compute initial salinity profile using the given salinity
1122	!-- gradients
1123	IF ( ocean ) THEN
1124
1125	i = 1
1126	gradient = 0.0
1127
1128	sa_vertical_gradient_level_ind(1) = nzt+1
1129	DO k = nzt, 0, -1
1130	IF ( i < 11 ) THEN
1131	IF ( sa_vertical_gradient_level(i) > zu(k) .AND. &
1132	sa_vertical_gradient_level(i) <= 0.0 ) THEN
1133	gradient = sa_vertical_gradient(i) / 100.0
1134	sa_vertical_gradient_level_ind(i) = k + 1
1135	i = i + 1
1136	ENDIF
1137	ENDIF
1138	IF ( gradient /= 0.0 ) THEN
1139	IF ( k /= nzt ) THEN
1140	sa_init(k) = sa_init(k+1) - dzu(k+1) * gradient
1141	ELSE
1142	sa_init(k) = sa_surface - 0.5 * dzu(k+1) * gradient
1143	sa_init(k+1) = sa_surface + 0.5 * dzu(k+1) * gradient
1144	ENDIF
1145	ELSE
1146	sa_init(k) = sa_init(k+1)
1147	ENDIF
1148	ENDDO
1149
1150	ENDIF
1151
1152	!
1153	!-- If required compute the profile of leaf area density used in the plant
1154	!-- canopy model
1155	IF ( plant_canopy ) THEN
1156
1157	i = 1
1158	gradient = 0.0
1159
1160	IF ( .NOT. ocean ) THEN
1161
1162	lad(0) = lad_surface
1163
1164	lad_vertical_gradient_level_ind(1) = 0
1165	DO k = 1, pch_index
1166	IF ( i < 11 ) THEN
1167	IF ( lad_vertical_gradient_level(i) < zu(k) .AND. &
1168	lad_vertical_gradient_level(i) >= 0.0 ) THEN
1169	gradient = lad_vertical_gradient(i)
1170	lad_vertical_gradient_level_ind(i) = k - 1
1171	i = i + 1
1172	ENDIF
1173	ENDIF
1174	IF ( gradient /= 0.0 ) THEN
1175	IF ( k /= 1 ) THEN
1176	lad(k) = lad(k-1) + dzu(k) * gradient
1177	ELSE
1178	lad(k) = lad_surface + 0.5 * dzu(k) *gradient
1179	ENDIF
1180	ELSE
1181	lad(k) = lad(k-1)
1182	ENDIF
1183	ENDDO
1184
1185	ENDIF
1186
1187	!
1188	!-- In case of no given leaf area density gradients, choose a vanishing
1189	!-- gradient
1190	IF ( lad_vertical_gradient_level(1) == -9999999.9 ) THEN
1191	lad_vertical_gradient_level(1) = 0.0
1192	ENDIF
1193
1194	ENDIF
1195
1196	ENDIF
1197
1198	!
1199	!-- Initialize large scale subsidence if required
1200	IF ( subs_vertical_gradient_level(1) /= -9999999.9 ) THEN
1201	large_scale_subsidence = .TRUE.
1202	CALL init_w_subsidence
1203	END IF
1204
1205
1206
1207	!
1208	!-- Compute Coriolis parameter
1209	f = 2.0 * omega * SIN( phi / 180.0 * pi )
1210	fs = 2.0 * omega * COS( phi / 180.0 * pi )
1211
1212	!
1213	!-- Ocean runs always use reference values in the buoyancy term. Therefore
1214	!-- set the reference temperature equal to the surface temperature.
1215	IF ( ocean .AND. pt_reference == 9999999.9 ) pt_reference = pt_surface
1216
1217	!
1218	!-- Reference value has to be used in buoyancy terms
1219	IF ( pt_reference /= 9999999.9 ) use_reference = .TRUE.
1220
1221	!
1222	!-- Sign of buoyancy/stability terms
1223	IF ( ocean ) atmos_ocean_sign = -1.0
1224
1225	!
1226	!-- Ocean version must use flux boundary conditions at the top
1227	IF ( ocean .AND. .NOT. use_top_fluxes ) THEN
1228	message_string = 'use_top_fluxes must be .TRUE. in ocean version'
1229	CALL message( 'check_parameters', 'PA0042', 1, 2, 0, 6, 0 )
1230	ENDIF
1231
1232	!
1233	!-- In case of a given slope, compute the relevant quantities
1234	IF ( alpha_surface /= 0.0 ) THEN
1235	IF ( ABS( alpha_surface ) > 90.0 ) THEN
1236	WRITE( message_string, * ) 'ABS( alpha_surface = ', alpha_surface, &
1237	' ) must be < 90.0'
1238	CALL message( 'check_parameters', 'PA0043', 1, 2, 0, 6, 0 )
1239	ENDIF
1240	sloping_surface = .TRUE.
1241	cos_alpha_surface = COS( alpha_surface / 180.0 * pi )
1242	sin_alpha_surface = SIN( alpha_surface / 180.0 * pi )
1243	ENDIF
1244
1245	!
1246	!-- Check time step and cfl_factor
1247	IF ( dt /= -1.0 ) THEN
1248	IF ( dt <= 0.0 .AND. dt /= -1.0 ) THEN
1249	WRITE( message_string, * ) 'dt = ', dt , ' <= 0.0'
1250	CALL message( 'check_parameters', 'PA0044', 1, 2, 0, 6, 0 )
1251	ENDIF
1252	dt_3d = dt
1253	dt_fixed = .TRUE.
1254	ENDIF
1255
1256	IF ( cfl_factor <= 0.0 .OR. cfl_factor > 1.0 ) THEN
1257	IF ( cfl_factor == -1.0 ) THEN
1258	IF ( momentum_advec == 'ups-scheme' .OR. &
1259	scalar_advec == 'ups-scheme' ) THEN
1260	cfl_factor = 0.8
1261	ELSE
1262	IF ( timestep_scheme == 'runge-kutta-2' ) THEN
1263	cfl_factor = 0.8
1264	ELSEIF ( timestep_scheme == 'runge-kutta-3' ) THEN
1265	cfl_factor = 0.9
1266	ELSE
1267	cfl_factor = 0.1
1268	ENDIF
1269	ENDIF
1270	ELSE
1271	WRITE( message_string, * ) 'cfl_factor = ', cfl_factor, &
1272	' out of range & 0.0 < cfl_factor <= 1.0 is required'
1273	CALL message( 'check_parameters', 'PA0045', 1, 2, 0, 6, 0 )
1274	ENDIF
1275	ENDIF
1276
1277	!
1278	!-- Store simulated time at begin
1279	simulated_time_at_begin = simulated_time
1280
1281	!
1282	!-- Store reference time for coupled runs and change the coupling flag,
1283	!-- if ...
1284	IF ( simulated_time == 0.0 ) THEN
1285	IF ( coupling_start_time == 0.0 ) THEN
1286	time_since_reference_point = 0.0
1287	ELSEIF ( time_since_reference_point < 0.0 ) THEN
1288	run_coupled = .FALSE.
1289	ENDIF
1290	ENDIF
1291
1292	!
1293	!-- Set wind speed in the Galilei-transformed system
1294	IF ( galilei_transformation ) THEN
1295	IF ( use_ug_for_galilei_tr .AND. &
1296	ug_vertical_gradient_level(1) == 0.0 .AND. &
1297	vg_vertical_gradient_level(1) == 0.0 ) THEN
1298	u_gtrans = ug_surface
1299	v_gtrans = vg_surface
1300	ELSEIF ( use_ug_for_galilei_tr .AND. &
1301	ug_vertical_gradient_level(1) /= 0.0 ) THEN
1302	message_string = 'baroclinicity (ug) not allowed simultaneously' // &
1303	' with galilei transformation'
1304	CALL message( 'check_parameters', 'PA0046', 1, 2, 0, 6, 0 )
1305	ELSEIF ( use_ug_for_galilei_tr .AND. &
1306	vg_vertical_gradient_level(1) /= 0.0 ) THEN
1307	message_string = 'baroclinicity (vg) not allowed simultaneously' // &
1308	' with galilei transformation'
1309	CALL message( 'check_parameters', 'PA0047', 1, 2, 0, 6, 0 )
1310	ELSE
1311	message_string = 'variable translation speed used for galilei-' // &
1312	'transformation, which may cause & instabilities in stably ' // &
1313	'stratified regions'
1314	CALL message( 'check_parameters', 'PA0048', 0, 1, 0, 6, 0 )
1315	ENDIF
1316	ENDIF
1317
1318	!
1319	!-- In case of using a prandtl-layer, calculated (or prescribed) surface
1320	!-- fluxes have to be used in the diffusion-terms
1321	IF ( prandtl_layer ) use_surface_fluxes = .TRUE.
1322
1323	!
1324	!-- Check boundary conditions and set internal variables:
1325	!-- Lateral boundary conditions
1326	IF ( bc_lr /= 'cyclic' .AND. bc_lr /= 'dirichlet/radiation' .AND. &
1327	bc_lr /= 'radiation/dirichlet' ) THEN
1328	message_string = 'unknown boundary condition: bc_lr = "' // &
1329	TRIM( bc_lr ) // '"'
1330	CALL message( 'check_parameters', 'PA0049', 1, 2, 0, 6, 0 )
1331	ENDIF
1332	IF ( bc_ns /= 'cyclic' .AND. bc_ns /= 'dirichlet/radiation' .AND. &
1333	bc_ns /= 'radiation/dirichlet' ) THEN
1334	message_string = 'unknown boundary condition: bc_ns = "' // &
1335	TRIM( bc_ns ) // '"'
1336	CALL message( 'check_parameters', 'PA0050', 1, 2, 0, 6, 0 )
1337	ENDIF
1338
1339	!
1340	!-- Internal variables used for speed optimization in if clauses
1341	IF ( bc_lr /= 'cyclic' ) bc_lr_cyc = .FALSE.
1342	IF ( bc_lr == 'dirichlet/radiation' ) bc_lr_dirrad = .TRUE.
1343	IF ( bc_lr == 'radiation/dirichlet' ) bc_lr_raddir = .TRUE.
1344	IF ( bc_ns /= 'cyclic' ) bc_ns_cyc = .FALSE.
1345	IF ( bc_ns == 'dirichlet/radiation' ) bc_ns_dirrad = .TRUE.
1346	IF ( bc_ns == 'radiation/dirichlet' ) bc_ns_raddir = .TRUE.
1347
1348	!
1349	!-- Non-cyclic lateral boundaries require the multigrid method and Piascek-
1350	!-- Willimas or Wicker - Skamarock advection scheme. Several schemes
1351	!-- and tools do not work with non-cyclic boundary conditions.
1352	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
1353	IF ( psolver /= 'multigrid' ) THEN
1354	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1355	'psolver = "' // TRIM( psolver ) // '"'
1356	CALL message( 'check_parameters', 'PA0051', 1, 2, 0, 6, 0 )
1357	ENDIF
1358	IF ( momentum_advec /= 'pw-scheme' .AND. &
1359	momentum_advec /= 'ws-scheme') THEN
1360	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1361	'momentum_advec = "' // TRIM( momentum_advec ) // '"'
1362	CALL message( 'check_parameters', 'PA0052', 1, 2, 0, 6, 0 )
1363	ENDIF
1364	IF ( scalar_advec /= 'pw-scheme' .AND. &
1365	scalar_advec /= 'ws-scheme' ) THEN
1366	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1367	'scalar_advec = "' // TRIM( scalar_advec ) // '"'
1368	CALL message( 'check_parameters', 'PA0053', 1, 2, 0, 6, 0 )
1369	ENDIF
1370	IF ( (scalar_advec == 'ws-scheme' .OR. momentum_advec == 'ws-scheme' ) &
1371	.AND. loop_optimization == 'vector' ) THEN
1372	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1373	'loop_optimization = vector and ' // &
1374	'scalar_advec = "' // TRIM( scalar_advec ) // '"'
1375	! The error message number still needs modification.
1376	CALL message( 'check_parameters', 'PA0342', 1, 2, 0, 6, 0 )
1377	END IF
1378	IF ( galilei_transformation ) THEN
1379	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1380	'galilei_transformation = .T.'
1381	CALL message( 'check_parameters', 'PA0054', 1, 2, 0, 6, 0 )
1382	ENDIF
1383	ENDIF
1384
1385	!
1386	!-- Bottom boundary condition for the turbulent Kinetic energy
1387	IF ( bc_e_b == 'neumann' ) THEN
1388	ibc_e_b = 1
1389	IF ( adjust_mixing_length .AND. prandtl_layer ) THEN
1390	message_string = 'adjust_mixing_length = TRUE and bc_e_b = "neumann"'
1391	CALL message( 'check_parameters', 'PA0055', 0, 1, 0, 6, 0 )
1392	ENDIF
1393	ELSEIF ( bc_e_b == '(u)*2+neumann' ) THEN
1394	ibc_e_b = 2
1395	IF ( .NOT. adjust_mixing_length .AND. prandtl_layer ) THEN
1396	message_string = 'adjust_mixing_length = FALSE and bc_e_b = "' // &
1397	TRIM( bc_e_b ) // '"'
1398	CALL message( 'check_parameters', 'PA0056', 0, 1, 0, 6, 0 )
1399	ENDIF
1400	IF ( .NOT. prandtl_layer ) THEN
1401	bc_e_b = 'neumann'
1402	ibc_e_b = 1
1403	message_string = 'boundary condition bc_e_b changed to "' // &
1404	TRIM( bc_e_b ) // '"'
1405	CALL message( 'check_parameters', 'PA0057', 0, 1, 0, 6, 0 )
1406	ENDIF
1407	ELSE
1408	message_string = 'unknown boundary condition: bc_e_b = "' // &
1409	TRIM( bc_e_b ) // '"'
1410	CALL message( 'check_parameters', 'PA0058', 1, 2, 0, 6, 0 )
1411	ENDIF
1412
1413	!
1414	!-- Boundary conditions for perturbation pressure
1415	IF ( bc_p_b == 'dirichlet' ) THEN
1416	ibc_p_b = 0
1417	ELSEIF ( bc_p_b == 'neumann' ) THEN
1418	ibc_p_b = 1
1419	ELSEIF ( bc_p_b == 'neumann+inhomo' ) THEN
1420	ibc_p_b = 2
1421	ELSE
1422	message_string = 'unknown boundary condition: bc_p_b = "' // &
1423	TRIM( bc_p_b ) // '"'
1424	CALL message( 'check_parameters', 'PA0059', 1, 2, 0, 6, 0 )
1425	ENDIF
1426	IF ( ibc_p_b == 2 .AND. .NOT. prandtl_layer ) THEN
1427	message_string = 'boundary condition: bc_p_b = "' // TRIM( bc_p_b ) // &
1428	'" not allowed with prandtl_layer = .FALSE.'
1429	CALL message( 'check_parameters', 'PA0060', 1, 2, 0, 6, 0 )
1430	ENDIF
1431	IF ( bc_p_t == 'dirichlet' ) THEN
1432	ibc_p_t = 0
1433	ELSEIF ( bc_p_t == 'neumann' ) THEN
1434	ibc_p_t = 1
1435	ELSE
1436	message_string = 'unknown boundary condition: bc_p_t = "' // &
1437	TRIM( bc_p_t ) // '"'
1438	CALL message( 'check_parameters', 'PA0061', 1, 2, 0, 6, 0 )
1439	ENDIF
1440
1441	!
1442	!-- Boundary conditions for potential temperature
1443	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
1444	ibc_pt_b = 2
1445	ELSE
1446	IF ( bc_pt_b == 'dirichlet' ) THEN
1447	ibc_pt_b = 0
1448	ELSEIF ( bc_pt_b == 'neumann' ) THEN
1449	ibc_pt_b = 1
1450	ELSE
1451	message_string = 'unknown boundary condition: bc_pt_b = "' // &
1452	TRIM( bc_pt_b ) // '"'
1453	CALL message( 'check_parameters', 'PA0062', 1, 2, 0, 6, 0 )
1454	ENDIF
1455	ENDIF
1456
1457	IF ( bc_pt_t == 'dirichlet' ) THEN
1458	ibc_pt_t = 0
1459	ELSEIF ( bc_pt_t == 'neumann' ) THEN
1460	ibc_pt_t = 1
1461	ELSEIF ( bc_pt_t == 'initial_gradient' ) THEN
1462	ibc_pt_t = 2
1463	ELSE
1464	message_string = 'unknown boundary condition: bc_pt_t = "' // &
1465	TRIM( bc_pt_t ) // '"'
1466	CALL message( 'check_parameters', 'PA0063', 1, 2, 0, 6, 0 )
1467	ENDIF
1468
1469	IF ( surface_heatflux == 9999999.9 ) constant_heatflux = .FALSE.
1470	IF ( top_heatflux == 9999999.9 ) constant_top_heatflux = .FALSE.
1471	IF ( top_momentumflux_u /= 9999999.9 .AND. &
1472	top_momentumflux_v /= 9999999.9 ) THEN
1473	constant_top_momentumflux = .TRUE.
1474	ELSEIF ( .NOT. ( top_momentumflux_u == 9999999.9 .AND. &
1475	top_momentumflux_v == 9999999.9 ) ) THEN
1476	message_string = 'both, top_momentumflux_u AND top_momentumflux_v ' // &
1477	'must be set'
1478	CALL message( 'check_parameters', 'PA0064', 1, 2, 0, 6, 0 )
1479	ENDIF
1480
1481	!
1482	!-- A given surface temperature implies Dirichlet boundary condition for
1483	!-- temperature. In this case specification of a constant heat flux is
1484	!-- forbidden.
1485	IF ( ibc_pt_b == 0 .AND. constant_heatflux .AND. &
1486	surface_heatflux /= 0.0 ) THEN
1487	message_string = 'boundary_condition: bc_pt_b = "' // TRIM( bc_pt_b ) //&
1488	'& is not allowed with constant_heatflux = .TRUE.'
1489	CALL message( 'check_parameters', 'PA0065', 1, 2, 0, 6, 0 )
1490	ENDIF
1491	IF ( constant_heatflux .AND. pt_surface_initial_change /= 0.0 ) THEN
1492	WRITE ( message_string, * ) 'constant_heatflux = .TRUE. is not allo', &
1493	'wed with pt_surface_initial_change (/=0) = ', &
1494	pt_surface_initial_change
1495	CALL message( 'check_parameters', 'PA0066', 1, 2, 0, 6, 0 )
1496	ENDIF
1497
1498	!
1499	!-- A given temperature at the top implies Dirichlet boundary condition for
1500	!-- temperature. In this case specification of a constant heat flux is
1501	!-- forbidden.
1502	IF ( ibc_pt_t == 0 .AND. constant_top_heatflux .AND. &
1503	top_heatflux /= 0.0 ) THEN
1504	message_string = 'boundary_condition: bc_pt_t = "' // TRIM( bc_pt_t ) //&
1505	'" is not allowed with constant_top_heatflux = .TRUE.'
1506	CALL message( 'check_parameters', 'PA0067', 1, 2, 0, 6, 0 )
1507	ENDIF
1508
1509	!
1510	!-- Boundary conditions for salinity
1511	IF ( ocean ) THEN
1512	IF ( bc_sa_t == 'dirichlet' ) THEN
1513	ibc_sa_t = 0
1514	ELSEIF ( bc_sa_t == 'neumann' ) THEN
1515	ibc_sa_t = 1
1516	ELSE
1517	message_string = 'unknown boundary condition: bc_sa_t = "' // &
1518	TRIM( bc_sa_t ) // '"'
1519	CALL message( 'check_parameters', 'PA0068', 1, 2, 0, 6, 0 )
1520	ENDIF
1521
1522	IF ( top_salinityflux == 9999999.9 ) constant_top_salinityflux = .FALSE.
1523	IF ( ibc_sa_t == 1 .AND. top_salinityflux == 9999999.9 ) THEN
1524	message_string = 'boundary condition: bc_sa_t = "' // &
1525	TRIM( bc_sa_t ) // '" requires to set ' // &
1526	'top_salinityflux'
1527	CALL message( 'check_parameters', 'PA0069', 1, 2, 0, 6, 0 )
1528	ENDIF
1529
1530	!
1531	!-- A fixed salinity at the top implies Dirichlet boundary condition for
1532	!-- salinity. In this case specification of a constant salinity flux is
1533	!-- forbidden.
1534	IF ( ibc_sa_t == 0 .AND. constant_top_salinityflux .AND. &
1535	top_salinityflux /= 0.0 ) THEN
1536	message_string = 'boundary condition: bc_sa_t = "' // &
1537	TRIM( bc_sa_t ) // '" is not allowed with ' // &
1538	'constant_top_salinityflux = .TRUE.'
1539	CALL message( 'check_parameters', 'PA0070', 1, 2, 0, 6, 0 )
1540	ENDIF
1541
1542	ENDIF
1543
1544	!
1545	!-- In case of humidity or passive scalar, set boundary conditions for total
1546	!-- water content / scalar
1547	IF ( humidity .OR. passive_scalar ) THEN
1548	IF ( humidity ) THEN
1549	sq = 'q'
1550	ELSE
1551	sq = 's'
1552	ENDIF
1553	IF ( bc_q_b == 'dirichlet' ) THEN
1554	ibc_q_b = 0
1555	ELSEIF ( bc_q_b == 'neumann' ) THEN
1556	ibc_q_b = 1
1557	ELSE
1558	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
1559	'_b ="' // TRIM( bc_q_b ) // '"'
1560	CALL message( 'check_parameters', 'PA0071', 1, 2, 0, 6, 0 )
1561	ENDIF
1562	IF ( bc_q_t == 'dirichlet' ) THEN
1563	ibc_q_t = 0
1564	ELSEIF ( bc_q_t == 'neumann' ) THEN
1565	ibc_q_t = 1
1566	ELSE
1567	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
1568	'_t ="' // TRIM( bc_q_t ) // '"'
1569	CALL message( 'check_parameters', 'PA0072', 1, 2, 0, 6, 0 )
1570	ENDIF
1571
1572	IF ( surface_waterflux == 9999999.9 ) constant_waterflux = .FALSE.
1573
1574	!
1575	!-- A given surface humidity implies Dirichlet boundary condition for
1576	!-- humidity. In this case specification of a constant water flux is
1577	!-- forbidden.
1578	IF ( ibc_q_b == 0 .AND. constant_waterflux ) THEN
1579	message_string = 'boundary condition: bc_' // TRIM( sq ) // '_b ' // &
1580	'= "' // TRIM( bc_q_b ) // '" is not allowed wi' // &
1581	'th prescribed surface flux'
1582	CALL message( 'check_parameters', 'PA0073', 1, 2, 0, 6, 0 )
1583	ENDIF
1584	IF ( constant_waterflux .AND. q_surface_initial_change /= 0.0 ) THEN
1585	WRITE( message_string, * ) 'a prescribed surface flux is not allo', &
1586	'wed with ', sq, '_surface_initial_change (/=0) = ', &
1587	q_surface_initial_change
1588	CALL message( 'check_parameters', 'PA0074', 1, 2, 0, 6, 0 )
1589	ENDIF
1590
1591	ENDIF
1592
1593	!
1594	!-- Boundary conditions for horizontal components of wind speed
1595	IF ( bc_uv_b == 'dirichlet' ) THEN
1596	ibc_uv_b = 0
1597	ELSEIF ( bc_uv_b == 'neumann' ) THEN
1598	ibc_uv_b = 1
1599	IF ( prandtl_layer ) THEN
1600	message_string = 'boundary condition: bc_uv_b = "' // &
1601	TRIM( bc_uv_b ) // '" is not allowed with prandtl_layer = .TRUE.'
1602	CALL message( 'check_parameters', 'PA0075', 1, 2, 0, 6, 0 )
1603	ENDIF
1604	ELSE
1605	message_string = 'unknown boundary condition: bc_uv_b = "' // &
1606	TRIM( bc_uv_b ) // '"'
1607	CALL message( 'check_parameters', 'PA0076', 1, 2, 0, 6, 0 )
1608	ENDIF
1609	!
1610	!-- In case of coupled simulations u and v at the ground in atmosphere will be
1611	!-- assigned with the u and v values of the ocean surface
1612	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
1613	ibc_uv_b = 2
1614	ENDIF
1615
1616	IF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
1617	bc_uv_t = 'neumann'
1618	ibc_uv_t = 1
1619	ELSE
1620	IF ( bc_uv_t == 'dirichlet' .OR. bc_uv_t == 'dirichlet_0' ) THEN
1621	ibc_uv_t = 0
1622	IF ( bc_uv_t == 'dirichlet_0' ) THEN
1623	!
1624	!-- Velocities for the initial u,v-profiles are set zero at the top
1625	!-- in case of dirichlet_0 conditions
1626	u_init(nzt+1) = 0.0
1627	v_init(nzt+1) = 0.0
1628	ENDIF
1629	ELSEIF ( bc_uv_t == 'neumann' ) THEN
1630	ibc_uv_t = 1
1631	ELSE
1632	message_string = 'unknown boundary condition: bc_uv_t = "' // &
1633	TRIM( bc_uv_t ) // '"'
1634	CALL message( 'check_parameters', 'PA0077', 1, 2, 0, 6, 0 )
1635	ENDIF
1636	ENDIF
1637
1638	!
1639	!-- Compute and check, respectively, the Rayleigh Damping parameter
1640	IF ( rayleigh_damping_factor == -1.0 ) THEN
1641	IF ( momentum_advec == 'ups-scheme' ) THEN
1642	rayleigh_damping_factor = 0.01
1643	ELSE
1644	rayleigh_damping_factor = 0.0
1645	ENDIF
1646	ELSE
1647	IF ( rayleigh_damping_factor < 0.0 .OR. rayleigh_damping_factor > 1.0 ) &
1648	THEN
1649	WRITE( message_string, * ) 'rayleigh_damping_factor = ', &
1650	rayleigh_damping_factor, ' out of range [0.0,1.0]'
1651	CALL message( 'check_parameters', 'PA0078', 1, 2, 0, 6, 0 )
1652	ENDIF
1653	ENDIF
1654
1655	IF ( rayleigh_damping_height == -1.0 ) THEN
1656	IF ( .NOT. ocean ) THEN
1657	rayleigh_damping_height = 0.66666666666 * zu(nzt)
1658	ELSE
1659	rayleigh_damping_height = 0.66666666666 * zu(nzb)
1660	ENDIF
1661	ELSE
1662	IF ( .NOT. ocean ) THEN
1663	IF ( rayleigh_damping_height < 0.0 .OR. &
1664	rayleigh_damping_height > zu(nzt) ) THEN
1665	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
1666	rayleigh_damping_height, ' out of range [0.0,', zu(nzt), ']'
1667	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
1668	ENDIF
1669	ELSE
1670	IF ( rayleigh_damping_height > 0.0 .OR. &
1671	rayleigh_damping_height < zu(nzb) ) THEN
1672	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
1673	rayleigh_damping_height, ' out of range [0.0,', zu(nzb), ']'
1674	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
1675	ENDIF
1676	ENDIF
1677	ENDIF
1678
1679	!
1680	!-- Check limiters for Upstream-Spline scheme
1681	IF ( overshoot_limit_u < 0.0 .OR. overshoot_limit_v < 0.0 .OR. &
1682	overshoot_limit_w < 0.0 .OR. overshoot_limit_pt < 0.0 .OR. &
1683	overshoot_limit_e < 0.0 ) THEN
1684	message_string = 'overshoot_limit_... < 0.0 is not allowed'
1685	CALL message( 'check_parameters', 'PA0080', 1, 2, 0, 6, 0 )
1686	ENDIF
1687	IF ( ups_limit_u < 0.0 .OR. ups_limit_v < 0.0 .OR. ups_limit_w < 0.0 .OR. &
1688	ups_limit_pt < 0.0 .OR. ups_limit_e < 0.0 ) THEN
1689	message_string = 'ups_limit_... < 0.0 is not allowed'
1690	CALL message( 'check_parameters', 'PA0081', 1, 2, 0, 6, 0 )
1691	ENDIF
1692
1693	!
1694	!-- Check number of chosen statistic regions. More than 10 regions are not
1695	!-- allowed, because so far no more than 10 corresponding output files can
1696	!-- be opened (cf. check_open)
1697	IF ( statistic_regions > 9 .OR. statistic_regions < 0 ) THEN
1698	WRITE ( message_string, * ) 'number of statistic_regions = ', &
1699	statistic_regions+1, ' but only 10 regions are allowed'
1700	CALL message( 'check_parameters', 'PA0082', 1, 2, 0, 6, 0 )
1701	ENDIF
1702	IF ( normalizing_region > statistic_regions .OR. &
1703	normalizing_region < 0) THEN
1704	WRITE ( message_string, * ) 'normalizing_region = ', &
1705	normalizing_region, ' must be >= 0 and <= ',statistic_regions, &
1706	' (value of statistic_regions)'
1707	CALL message( 'check_parameters', 'PA0083', 1, 2, 0, 6, 0 )
1708	ENDIF
1709
1710	!
1711	!-- Check the interval for sorting particles.
1712	!-- Using particles as cloud droplets requires sorting after each timestep.
1713	IF ( dt_sort_particles /= 0.0 .AND. cloud_droplets ) THEN
1714	dt_sort_particles = 0.0
1715	message_string = 'dt_sort_particles is reset to 0.0 because of cloud' //&
1716	'_droplets = .TRUE.'
1717	CALL message( 'check_parameters', 'PA0084', 0, 1, 0, 6, 0 )
1718	ENDIF
1719
1720	!
1721	!-- Set the default intervals for data output, if necessary
1722	!-- NOTE: dt_dosp has already been set in package_parin
1723	IF ( dt_data_output /= 9999999.9 ) THEN
1724	IF ( dt_dopr == 9999999.9 ) dt_dopr = dt_data_output
1725	IF ( dt_dopts == 9999999.9 ) dt_dopts = dt_data_output
1726	IF ( dt_do2d_xy == 9999999.9 ) dt_do2d_xy = dt_data_output
1727	IF ( dt_do2d_xz == 9999999.9 ) dt_do2d_xz = dt_data_output
1728	IF ( dt_do2d_yz == 9999999.9 ) dt_do2d_yz = dt_data_output
1729	IF ( dt_do3d == 9999999.9 ) dt_do3d = dt_data_output
1730	IF ( dt_data_output_av == 9999999.9 ) dt_data_output_av = dt_data_output
1731	DO mid = 1, max_masks
1732	IF ( dt_domask(mid) == 9999999.9 ) dt_domask(mid) = dt_data_output
1733	ENDDO
1734	ENDIF
1735
1736	!
1737	!-- Set the default skip time intervals for data output, if necessary
1738	IF ( skip_time_dopr == 9999999.9 ) &
1739	skip_time_dopr = skip_time_data_output
1740	IF ( skip_time_dosp == 9999999.9 ) &
1741	skip_time_dosp = skip_time_data_output
1742	IF ( skip_time_do2d_xy == 9999999.9 ) &
1743	skip_time_do2d_xy = skip_time_data_output
1744	IF ( skip_time_do2d_xz == 9999999.9 ) &
1745	skip_time_do2d_xz = skip_time_data_output
1746	IF ( skip_time_do2d_yz == 9999999.9 ) &
1747	skip_time_do2d_yz = skip_time_data_output
1748	IF ( skip_time_do3d == 9999999.9 ) &
1749	skip_time_do3d = skip_time_data_output
1750	IF ( skip_time_data_output_av == 9999999.9 ) &
1751	skip_time_data_output_av = skip_time_data_output
1752	DO mid = 1, max_masks
1753	IF ( skip_time_domask(mid) == 9999999.9 ) &
1754	skip_time_domask(mid) = skip_time_data_output
1755	ENDDO
1756
1757	!
1758	!-- Check the average intervals (first for 3d-data, then for profiles and
1759	!-- spectra)
1760	IF ( averaging_interval > dt_data_output_av ) THEN
1761	WRITE( message_string, * ) 'averaging_interval = ', &
1762	averaging_interval, ' must be <= dt_data_output = ', dt_data_output
1763	CALL message( 'check_parameters', 'PA0085', 1, 2, 0, 6, 0 )
1764	ENDIF
1765
1766	IF ( averaging_interval_pr == 9999999.9 ) THEN
1767	averaging_interval_pr = averaging_interval
1768	ENDIF
1769
1770	IF ( averaging_interval_pr > dt_dopr ) THEN
1771	WRITE( message_string, * ) 'averaging_interval_pr = ', &
1772	averaging_interval_pr, ' must be <= dt_dopr = ', dt_dopr
1773	CALL message( 'check_parameters', 'PA0086', 1, 2, 0, 6, 0 )
1774	ENDIF
1775
1776	IF ( averaging_interval_sp == 9999999.9 ) THEN
1777	averaging_interval_sp = averaging_interval
1778	ENDIF
1779
1780	IF ( averaging_interval_sp > dt_dosp ) THEN
1781	WRITE( message_string, * ) 'averaging_interval_sp = ', &
1782	averaging_interval_sp, ' must be <= dt_dosp = ', dt_dosp
1783	CALL message( 'check_parameters', 'PA0087', 1, 2, 0, 6, 0 )
1784	ENDIF
1785
1786	!
1787	!-- Set the default interval for profiles entering the temporal average
1788	IF ( dt_averaging_input_pr == 9999999.9 ) THEN
1789	dt_averaging_input_pr = dt_averaging_input
1790	ENDIF
1791
1792	!
1793	!-- Set the default interval for the output of timeseries to a reasonable
1794	!-- value (tries to minimize the number of calls of flow_statistics)
1795	IF ( dt_dots == 9999999.9 ) THEN
1796	IF ( averaging_interval_pr == 0.0 ) THEN
1797	dt_dots = MIN( dt_run_control, dt_dopr )
1798	ELSE
1799	dt_dots = MIN( dt_run_control, dt_averaging_input_pr )
1800	ENDIF
1801	ENDIF
1802
1803	!
1804	!-- Check the sample rate for averaging (first for 3d-data, then for profiles)
1805	IF ( dt_averaging_input > averaging_interval ) THEN
1806	WRITE( message_string, * ) 'dt_averaging_input = ', &
1807	dt_averaging_input, ' must be <= averaging_interval = ', &
1808	averaging_interval
1809	CALL message( 'check_parameters', 'PA0088', 1, 2, 0, 6, 0 )
1810	ENDIF
1811
1812	IF ( dt_averaging_input_pr > averaging_interval_pr ) THEN
1813	WRITE( message_string, * ) 'dt_averaging_input_pr = ', &
1814	dt_averaging_input_pr, ' must be <= averaging_interval_pr = ', &
1815	averaging_interval_pr
1816	CALL message( 'check_parameters', 'PA0089', 1, 2, 0, 6, 0 )
1817	ENDIF
1818
1819	!
1820	!-- Set the default value for the integration interval of precipitation amount
1821	IF ( precipitation ) THEN
1822	IF ( precipitation_amount_interval == 9999999.9 ) THEN
1823	precipitation_amount_interval = dt_do2d_xy
1824	ELSE
1825	IF ( precipitation_amount_interval > dt_do2d_xy ) THEN
1826	WRITE( message_string, * ) 'precipitation_amount_interval = ', &
1827	precipitation_amount_interval, ' must not be larger than ', &
1828	'dt_do2d_xy = ', dt_do2d_xy
1829	CALL message( 'check_parameters', 'PA0090', 1, 2, 0, 6, 0 )
1830	ENDIF
1831	ENDIF
1832	ENDIF
1833
1834	!
1835	!-- Determine the number of output profiles and check whether they are
1836	!-- permissible
1837	DO WHILE ( data_output_pr(dopr_n+1) /= ' ' )
1838
1839	dopr_n = dopr_n + 1
1840	i = dopr_n
1841
1842	!
1843	!-- Determine internal profile number (for hom, homs)
1844	!-- and store height levels
1845	SELECT CASE ( TRIM( data_output_pr(i) ) )
1846
1847	CASE ( 'u', '#u' )
1848	dopr_index(i) = 1
1849	dopr_unit(i) = 'm/s'
1850	hom(:,2,1,:) = SPREAD( zu, 2, statistic_regions+1 )
1851	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1852	dopr_initial_index(i) = 5
1853	hom(:,2,5,:) = SPREAD( zu, 2, statistic_regions+1 )
1854	data_output_pr(i) = data_output_pr(i)(2:)
1855	ENDIF
1856
1857	CASE ( 'v', '#v' )
1858	dopr_index(i) = 2
1859	dopr_unit(i) = 'm/s'
1860	hom(:,2,2,:) = SPREAD( zu, 2, statistic_regions+1 )
1861	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1862	dopr_initial_index(i) = 6
1863	hom(:,2,6,:) = SPREAD( zu, 2, statistic_regions+1 )
1864	data_output_pr(i) = data_output_pr(i)(2:)
1865	ENDIF
1866
1867	CASE ( 'w' )
1868	dopr_index(i) = 3
1869	dopr_unit(i) = 'm/s'
1870	hom(:,2,3,:) = SPREAD( zw, 2, statistic_regions+1 )
1871
1872	CASE ( 'pt', '#pt' )
1873	IF ( .NOT. cloud_physics ) THEN
1874	dopr_index(i) = 4
1875	dopr_unit(i) = 'K'
1876	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
1877	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1878	dopr_initial_index(i) = 7
1879	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
1880	hom(nzb,2,7,:) = 0.0 ! because zu(nzb) is negative
1881	data_output_pr(i) = data_output_pr(i)(2:)
1882	ENDIF
1883	ELSE
1884	dopr_index(i) = 43
1885	dopr_unit(i) = 'K'
1886	hom(:,2,43,:) = SPREAD( zu, 2, statistic_regions+1 )
1887	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1888	dopr_initial_index(i) = 28
1889	hom(:,2,28,:) = SPREAD( zu, 2, statistic_regions+1 )
1890	hom(nzb,2,28,:) = 0.0 ! because zu(nzb) is negative
1891	data_output_pr(i) = data_output_pr(i)(2:)
1892	ENDIF
1893	ENDIF
1894
1895	CASE ( 'e' )
1896	dopr_index(i) = 8
1897	dopr_unit(i) = 'm2/s2'
1898	hom(:,2,8,:) = SPREAD( zu, 2, statistic_regions+1 )
1899	hom(nzb,2,8,:) = 0.0
1900
1901	CASE ( 'km', '#km' )
1902	dopr_index(i) = 9
1903	dopr_unit(i) = 'm2/s'
1904	hom(:,2,9,:) = SPREAD( zu, 2, statistic_regions+1 )
1905	hom(nzb,2,9,:) = 0.0
1906	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1907	dopr_initial_index(i) = 23
1908	hom(:,2,23,:) = hom(:,2,9,:)
1909	data_output_pr(i) = data_output_pr(i)(2:)
1910	ENDIF
1911
1912	CASE ( 'kh', '#kh' )
1913	dopr_index(i) = 10
1914	dopr_unit(i) = 'm2/s'
1915	hom(:,2,10,:) = SPREAD( zu, 2, statistic_regions+1 )
1916	hom(nzb,2,10,:) = 0.0
1917	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1918	dopr_initial_index(i) = 24
1919	hom(:,2,24,:) = hom(:,2,10,:)
1920	data_output_pr(i) = data_output_pr(i)(2:)
1921	ENDIF
1922
1923	CASE ( 'l', '#l' )
1924	dopr_index(i) = 11
1925	dopr_unit(i) = 'm'
1926	hom(:,2,11,:) = SPREAD( zu, 2, statistic_regions+1 )
1927	hom(nzb,2,11,:) = 0.0
1928	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1929	dopr_initial_index(i) = 25
1930	hom(:,2,25,:) = hom(:,2,11,:)
1931	data_output_pr(i) = data_output_pr(i)(2:)
1932	ENDIF
1933
1934	CASE ( 'w"u"' )
1935	dopr_index(i) = 12
1936	dopr_unit(i) = 'm2/s2'
1937	hom(:,2,12,:) = SPREAD( zw, 2, statistic_regions+1 )
1938	IF ( prandtl_layer ) hom(nzb,2,12,:) = zu(1)
1939
1940	CASE ( 'wu' )
1941	dopr_index(i) = 13
1942	dopr_unit(i) = 'm2/s2'
1943	hom(:,2,13,:) = SPREAD( zw, 2, statistic_regions+1 )
1944
1945	CASE ( 'w"v"' )
1946	dopr_index(i) = 14
1947	dopr_unit(i) = 'm2/s2'
1948	hom(:,2,14,:) = SPREAD( zw, 2, statistic_regions+1 )
1949	IF ( prandtl_layer ) hom(nzb,2,14,:) = zu(1)
1950
1951	CASE ( 'wv' )
1952	dopr_index(i) = 15
1953	dopr_unit(i) = 'm2/s2'
1954	hom(:,2,15,:) = SPREAD( zw, 2, statistic_regions+1 )
1955
1956	CASE ( 'w"pt"' )
1957	dopr_index(i) = 16
1958	dopr_unit(i) = 'K m/s'
1959	hom(:,2,16,:) = SPREAD( zw, 2, statistic_regions+1 )
1960
1961	CASE ( 'wpt' )
1962	dopr_index(i) = 17
1963	dopr_unit(i) = 'K m/s'
1964	hom(:,2,17,:) = SPREAD( zw, 2, statistic_regions+1 )
1965
1966	CASE ( 'wpt' )
1967	dopr_index(i) = 18
1968	dopr_unit(i) = 'K m/s'
1969	hom(:,2,18,:) = SPREAD( zw, 2, statistic_regions+1 )
1970
1971	CASE ( 'wu' )
1972	dopr_index(i) = 19
1973	dopr_unit(i) = 'm2/s2'
1974	hom(:,2,19,:) = SPREAD( zw, 2, statistic_regions+1 )
1975	IF ( prandtl_layer ) hom(nzb,2,19,:) = zu(1)
1976
1977	CASE ( 'wv' )
1978	dopr_index(i) = 20
1979	dopr_unit(i) = 'm2/s2'
1980	hom(:,2,20,:) = SPREAD( zw, 2, statistic_regions+1 )
1981	IF ( prandtl_layer ) hom(nzb,2,20,:) = zu(1)
1982
1983	CASE ( 'wptBC' )
1984	dopr_index(i) = 21
1985	dopr_unit(i) = 'K m/s'
1986	hom(:,2,21,:) = SPREAD( zw, 2, statistic_regions+1 )
1987
1988	CASE ( 'wptBC' )
1989	dopr_index(i) = 22
1990	dopr_unit(i) = 'K m/s'
1991	hom(:,2,22,:) = SPREAD( zw, 2, statistic_regions+1 )
1992
1993	CASE ( 'sa', '#sa' )
1994	IF ( .NOT. ocean ) THEN
1995	message_string = 'data_output_pr = ' // &
1996	TRIM( data_output_pr(i) ) // ' is not imp' // &
1997	'lemented for ocean = .FALSE.'
1998	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
1999	ELSE
2000	dopr_index(i) = 23
2001	dopr_unit(i) = 'psu'
2002	hom(:,2,23,:) = SPREAD( zu, 2, statistic_regions+1 )
2003	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2004	dopr_initial_index(i) = 26
2005	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2006	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
2007	data_output_pr(i) = data_output_pr(i)(2:)
2008	ENDIF
2009	ENDIF
2010
2011	CASE ( 'u*2' )
2012	dopr_index(i) = 30
2013	dopr_unit(i) = 'm2/s2'
2014	hom(:,2,30,:) = SPREAD( zu, 2, statistic_regions+1 )
2015
2016	CASE ( 'v*2' )
2017	dopr_index(i) = 31
2018	dopr_unit(i) = 'm2/s2'
2019	hom(:,2,31,:) = SPREAD( zu, 2, statistic_regions+1 )
2020
2021	CASE ( 'w*2' )
2022	dopr_index(i) = 32
2023	dopr_unit(i) = 'm2/s2'
2024	hom(:,2,32,:) = SPREAD( zw, 2, statistic_regions+1 )
2025
2026	CASE ( 'pt*2' )
2027	dopr_index(i) = 33
2028	dopr_unit(i) = 'K2'
2029	hom(:,2,33,:) = SPREAD( zu, 2, statistic_regions+1 )
2030
2031	CASE ( 'e*' )
2032	dopr_index(i) = 34
2033	dopr_unit(i) = 'm2/s2'
2034	hom(:,2,34,:) = SPREAD( zu, 2, statistic_regions+1 )
2035
2036	CASE ( 'w2pt' )
2037	dopr_index(i) = 35
2038	dopr_unit(i) = 'K m2/s2'
2039	hom(:,2,35,:) = SPREAD( zw, 2, statistic_regions+1 )
2040
2041	CASE ( 'wpt2' )
2042	dopr_index(i) = 36
2043	dopr_unit(i) = 'K2 m/s'
2044	hom(:,2,36,:) = SPREAD( zw, 2, statistic_regions+1 )
2045
2046	CASE ( 'we' )
2047	dopr_index(i) = 37
2048	dopr_unit(i) = 'm3/s3'
2049	hom(:,2,37,:) = SPREAD( zw, 2, statistic_regions+1 )
2050
2051	CASE ( 'w*3' )
2052	dopr_index(i) = 38
2053	dopr_unit(i) = 'm3/s3'
2054	hom(:,2,38,:) = SPREAD( zw, 2, statistic_regions+1 )
2055
2056	CASE ( 'Sw' )
2057	dopr_index(i) = 39
2058	dopr_unit(i) = 'none'
2059	hom(:,2,39,:) = SPREAD( zw, 2, statistic_regions+1 )
2060
2061	CASE ( 'p' )
2062	dopr_index(i) = 40
2063	dopr_unit(i) = 'Pa'
2064	hom(:,2,40,:) = SPREAD( zu, 2, statistic_regions+1 )
2065
2066	CASE ( 'q', '#q' )
2067	IF ( .NOT. humidity ) THEN
2068	message_string = 'data_output_pr = ' // &
2069	TRIM( data_output_pr(i) ) // ' is not imp' // &
2070	'lemented for humidity = .FALSE.'
2071	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2072	ELSE
2073	dopr_index(i) = 41
2074	dopr_unit(i) = 'kg/kg'
2075	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
2076	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2077	dopr_initial_index(i) = 26
2078	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2079	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
2080	data_output_pr(i) = data_output_pr(i)(2:)
2081	ENDIF
2082	ENDIF
2083
2084	CASE ( 's', '#s' )
2085	IF ( .NOT. passive_scalar ) THEN
2086	message_string = 'data_output_pr = ' // &
2087	TRIM( data_output_pr(i) ) // ' is not imp' // &
2088	'lemented for passive_scalar = .FALSE.'
2089	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2090	ELSE
2091	dopr_index(i) = 41
2092	dopr_unit(i) = 'kg/m3'
2093	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
2094	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2095	dopr_initial_index(i) = 26
2096	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2097	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
2098	data_output_pr(i) = data_output_pr(i)(2:)
2099	ENDIF
2100	ENDIF
2101
2102	CASE ( 'qv', '#qv' )
2103	IF ( .NOT. cloud_physics ) THEN
2104	dopr_index(i) = 41
2105	dopr_unit(i) = 'kg/kg'
2106	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
2107	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2108	dopr_initial_index(i) = 26
2109	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2110	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
2111	data_output_pr(i) = data_output_pr(i)(2:)
2112	ENDIF
2113	ELSE
2114	dopr_index(i) = 42
2115	dopr_unit(i) = 'kg/kg'
2116	hom(:,2,42,:) = SPREAD( zu, 2, statistic_regions+1 )
2117	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2118	dopr_initial_index(i) = 27
2119	hom(:,2,27,:) = SPREAD( zu, 2, statistic_regions+1 )
2120	hom(nzb,2,27,:) = 0.0 ! weil zu(nzb) negativ ist
2121	data_output_pr(i) = data_output_pr(i)(2:)
2122	ENDIF
2123	ENDIF
2124
2125	CASE ( 'lpt', '#lpt' )
2126	IF ( .NOT. cloud_physics ) THEN
2127	message_string = 'data_output_pr = ' // &
2128	TRIM( data_output_pr(i) ) // ' is not imp' // &
2129	'lemented for cloud_physics = .FALSE.'
2130	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2131	ELSE
2132	dopr_index(i) = 4
2133	dopr_unit(i) = 'K'
2134	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
2135	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2136	dopr_initial_index(i) = 7
2137	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
2138	hom(nzb,2,7,:) = 0.0 ! weil zu(nzb) negativ ist
2139	data_output_pr(i) = data_output_pr(i)(2:)
2140	ENDIF
2141	ENDIF
2142
2143	CASE ( 'vpt', '#vpt' )
2144	dopr_index(i) = 44
2145	dopr_unit(i) = 'K'
2146	hom(:,2,44,:) = SPREAD( zu, 2, statistic_regions+1 )
2147	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2148	dopr_initial_index(i) = 29
2149	hom(:,2,29,:) = SPREAD( zu, 2, statistic_regions+1 )
2150	hom(nzb,2,29,:) = 0.0 ! weil zu(nzb) negativ ist
2151	data_output_pr(i) = data_output_pr(i)(2:)
2152	ENDIF
2153
2154	CASE ( 'w"vpt"' )
2155	dopr_index(i) = 45
2156	dopr_unit(i) = 'K m/s'
2157	hom(:,2,45,:) = SPREAD( zw, 2, statistic_regions+1 )
2158
2159	CASE ( 'wvpt' )
2160	dopr_index(i) = 46
2161	dopr_unit(i) = 'K m/s'
2162	hom(:,2,46,:) = SPREAD( zw, 2, statistic_regions+1 )
2163
2164	CASE ( 'wvpt' )
2165	dopr_index(i) = 47
2166	dopr_unit(i) = 'K m/s'
2167	hom(:,2,47,:) = SPREAD( zw, 2, statistic_regions+1 )
2168
2169	CASE ( 'w"q"' )
2170	IF ( .NOT. humidity ) THEN
2171	message_string = 'data_output_pr = ' // &
2172	TRIM( data_output_pr(i) ) // ' is not imp' // &
2173	'lemented for humidity = .FALSE.'
2174	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2175	ELSE
2176	dopr_index(i) = 48
2177	dopr_unit(i) = 'kg/kg m/s'
2178	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2179	ENDIF
2180
2181	CASE ( 'wq' )
2182	IF ( .NOT. humidity ) THEN
2183	message_string = 'data_output_pr = ' // &
2184	TRIM( data_output_pr(i) ) // ' is not imp' // &
2185	'lemented for humidity = .FALSE.'
2186	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2187	ELSE
2188	dopr_index(i) = 49
2189	dopr_unit(i) = 'kg/kg m/s'
2190	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2191	ENDIF
2192
2193	CASE ( 'wq' )
2194	IF ( .NOT. humidity ) THEN
2195	message_string = 'data_output_pr = ' // &
2196	TRIM( data_output_pr(i) ) // ' is not imp' // &
2197	'lemented for humidity = .FALSE.'
2198	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2199	ELSE
2200	dopr_index(i) = 50
2201	dopr_unit(i) = 'kg/kg m/s'
2202	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2203	ENDIF
2204
2205	CASE ( 'w"s"' )
2206	IF ( .NOT. passive_scalar ) THEN
2207	message_string = 'data_output_pr = ' // &
2208	TRIM( data_output_pr(i) ) // ' is not imp' // &
2209	'lemented for passive_scalar = .FALSE.'
2210	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2211	ELSE
2212	dopr_index(i) = 48
2213	dopr_unit(i) = 'kg/m3 m/s'
2214	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2215	ENDIF
2216
2217	CASE ( 'ws' )
2218	IF ( .NOT. passive_scalar ) THEN
2219	message_string = 'data_output_pr = ' // &
2220	TRIM( data_output_pr(i) ) // ' is not imp' // &
2221	'lemented for passive_scalar = .FALSE.'
2222	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2223	ELSE
2224	dopr_index(i) = 49
2225	dopr_unit(i) = 'kg/m3 m/s'
2226	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2227	ENDIF
2228
2229	CASE ( 'ws' )
2230	IF ( .NOT. passive_scalar ) THEN
2231	message_string = 'data_output_pr = ' // &
2232	TRIM( data_output_pr(i) ) // ' is not imp' // &
2233	'lemented for passive_scalar = .FALSE.'
2234	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2235	ELSE
2236	dopr_index(i) = 50
2237	dopr_unit(i) = 'kg/m3 m/s'
2238	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2239	ENDIF
2240
2241	CASE ( 'w"qv"' )
2242	IF ( humidity .AND. .NOT. cloud_physics ) &
2243	THEN
2244	dopr_index(i) = 48
2245	dopr_unit(i) = 'kg/kg m/s'
2246	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2247	ELSEIF( humidity .AND. cloud_physics ) THEN
2248	dopr_index(i) = 51
2249	dopr_unit(i) = 'kg/kg m/s'
2250	hom(:,2,51,:) = SPREAD( zw, 2, statistic_regions+1 )
2251	ELSE
2252	message_string = 'data_output_pr = ' // &
2253	TRIM( data_output_pr(i) ) // ' is not imp' // &
2254	'lemented for cloud_physics = .FALSE. an&' // &
2255	'd humidity = .FALSE.'
2256	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2257	ENDIF
2258
2259	CASE ( 'wqv' )
2260	IF ( humidity .AND. .NOT. cloud_physics ) &
2261	THEN
2262	dopr_index(i) = 49
2263	dopr_unit(i) = 'kg/kg m/s'
2264	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2265	ELSEIF( humidity .AND. cloud_physics ) THEN
2266	dopr_index(i) = 52
2267	dopr_unit(i) = 'kg/kg m/s'
2268	hom(:,2,52,:) = SPREAD( zw, 2, statistic_regions+1 )
2269	ELSE
2270	message_string = 'data_output_pr = ' // &
2271	TRIM( data_output_pr(i) ) // ' is not imp' // &
2272	'lemented for cloud_physics = .FALSE. an&' // &
2273	'd humidity = .FALSE.'
2274	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2275	ENDIF
2276
2277	CASE ( 'wqv' )
2278	IF ( humidity .AND. .NOT. cloud_physics ) &
2279	THEN
2280	dopr_index(i) = 50
2281	dopr_unit(i) = 'kg/kg m/s'
2282	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2283	ELSEIF( humidity .AND. cloud_physics ) THEN
2284	dopr_index(i) = 53
2285	dopr_unit(i) = 'kg/kg m/s'
2286	hom(:,2,53,:) = SPREAD( zw, 2, statistic_regions+1 )
2287	ELSE
2288	message_string = 'data_output_pr = ' // &
2289	TRIM( data_output_pr(i) ) // ' is not imp' // &
2290	'lemented for cloud_physics = .FALSE. an&' // &
2291	'd humidity = .FALSE.'
2292	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2293	ENDIF
2294
2295	CASE ( 'ql' )
2296	IF ( .NOT. cloud_physics .AND. .NOT. cloud_droplets ) THEN
2297	message_string = 'data_output_pr = ' // &
2298	TRIM( data_output_pr(i) ) // ' is not imp' // &
2299	'lemented for cloud_physics = .FALSE. or' // &
2300	'&cloud_droplets = .FALSE.'
2301	CALL message( 'check_parameters', 'PA0096', 1, 2, 0, 6, 0 )
2302	ELSE
2303	dopr_index(i) = 54
2304	dopr_unit(i) = 'kg/kg'
2305	hom(:,2,54,:) = SPREAD( zu, 2, statistic_regions+1 )
2306	ENDIF
2307
2308	CASE ( 'wuu*:dz' )
2309	dopr_index(i) = 55
2310	dopr_unit(i) = 'm2/s3'
2311	hom(:,2,55,:) = SPREAD( zu, 2, statistic_regions+1 )
2312
2313	CASE ( 'wp:dz' )
2314	dopr_index(i) = 56
2315	dopr_unit(i) = 'm2/s3'
2316	hom(:,2,56,:) = SPREAD( zw, 2, statistic_regions+1 )
2317
2318	CASE ( 'w"e:dz' )
2319	dopr_index(i) = 57
2320	dopr_unit(i) = 'm2/s3'
2321	hom(:,2,57,:) = SPREAD( zu, 2, statistic_regions+1 )
2322
2323
2324	CASE ( 'u"pt"' )
2325	dopr_index(i) = 58
2326	dopr_unit(i) = 'K m/s'
2327	hom(:,2,58,:) = SPREAD( zu, 2, statistic_regions+1 )
2328
2329	CASE ( 'upt' )
2330	dopr_index(i) = 59
2331	dopr_unit(i) = 'K m/s'
2332	hom(:,2,59,:) = SPREAD( zu, 2, statistic_regions+1 )
2333
2334	CASE ( 'upt_t' )
2335	dopr_index(i) = 60
2336	dopr_unit(i) = 'K m/s'
2337	hom(:,2,60,:) = SPREAD( zu, 2, statistic_regions+1 )
2338
2339	CASE ( 'v"pt"' )
2340	dopr_index(i) = 61
2341	dopr_unit(i) = 'K m/s'
2342	hom(:,2,61,:) = SPREAD( zu, 2, statistic_regions+1 )
2343
2344	CASE ( 'vpt' )
2345	dopr_index(i) = 62
2346	dopr_unit(i) = 'K m/s'
2347	hom(:,2,62,:) = SPREAD( zu, 2, statistic_regions+1 )
2348
2349	CASE ( 'vpt_t' )
2350	dopr_index(i) = 63
2351	dopr_unit(i) = 'K m/s'
2352	hom(:,2,63,:) = SPREAD( zu, 2, statistic_regions+1 )
2353
2354	CASE ( 'rho' )
2355	IF ( .NOT. ocean ) THEN
2356	message_string = 'data_output_pr = ' // &
2357	TRIM( data_output_pr(i) ) // ' is not imp' // &
2358	'lemented for ocean = .FALSE.'
2359	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2360	ELSE
2361	dopr_index(i) = 64
2362	dopr_unit(i) = 'kg/m3'
2363	hom(:,2,64,:) = SPREAD( zu, 2, statistic_regions+1 )
2364	ENDIF
2365
2366	CASE ( 'w"sa"' )
2367	IF ( .NOT. ocean ) THEN
2368	message_string = 'data_output_pr = ' // &
2369	TRIM( data_output_pr(i) ) // ' is not imp' // &
2370	'lemented for ocean = .FALSE.'
2371	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2372	ELSE
2373	dopr_index(i) = 65
2374	dopr_unit(i) = 'psu m/s'
2375	hom(:,2,65,:) = SPREAD( zw, 2, statistic_regions+1 )
2376	ENDIF
2377
2378	CASE ( 'wsa' )
2379	IF ( .NOT. ocean ) THEN
2380	message_string = 'data_output_pr = ' // &
2381	TRIM( data_output_pr(i) ) // ' is not imp' // &
2382	'lemented for ocean = .FALSE.'
2383	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2384	ELSE
2385	dopr_index(i) = 66
2386	dopr_unit(i) = 'psu m/s'
2387	hom(:,2,66,:) = SPREAD( zw, 2, statistic_regions+1 )
2388	ENDIF
2389
2390	CASE ( 'wsa' )
2391	IF ( .NOT. ocean ) THEN
2392	message_string = 'data_output_pr = ' // &
2393	TRIM( data_output_pr(i) ) // ' is not imp' // &
2394	'lemented for ocean = .FALSE.'
2395	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2396	ELSE
2397	dopr_index(i) = 67
2398	dopr_unit(i) = 'psu m/s'
2399	hom(:,2,67,:) = SPREAD( zw, 2, statistic_regions+1 )
2400	ENDIF
2401
2402	CASE ( 'wp' )
2403	dopr_index(i) = 68
2404	dopr_unit(i) = 'm3/s3'
2405	hom(:,2,68,:) = SPREAD( zu, 2, statistic_regions+1 )
2406
2407	CASE ( 'w"e' )
2408	dopr_index(i) = 69
2409	dopr_unit(i) = 'm3/s3'
2410	hom(:,2,69,:) = SPREAD( zu, 2, statistic_regions+1 )
2411
2412	CASE ( 'q*2' )
2413	IF ( .NOT. humidity ) THEN
2414	message_string = 'data_output_pr = ' // &
2415	TRIM( data_output_pr(i) ) // ' is not imp' // &
2416	'lemented for humidity = .FALSE.'
2417	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2418	ELSE
2419	dopr_index(i) = 70
2420	dopr_unit(i) = 'kg2/kg2'
2421	hom(:,2,70,:) = SPREAD( zu, 2, statistic_regions+1 )
2422	ENDIF
2423
2424	CASE ( 'prho' )
2425	IF ( .NOT. ocean ) THEN
2426	message_string = 'data_output_pr = ' // &
2427	TRIM( data_output_pr(i) ) // ' is not imp' // &
2428	'lemented for ocean = .FALSE.'
2429	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2430	ELSE
2431	dopr_index(i) = 71
2432	dopr_unit(i) = 'kg/m3'
2433	hom(:,2,71,:) = SPREAD( zu, 2, statistic_regions+1 )
2434	ENDIF
2435
2436	CASE ( 'hyp' )
2437	dopr_index(i) = 72
2438	dopr_unit(i) = 'dbar'
2439	hom(:,2,72,:) = SPREAD( zu, 2, statistic_regions+1 )
2440
2441	CASE DEFAULT
2442
2443	CALL user_check_data_output_pr( data_output_pr(i), i, unit )
2444
2445	IF ( unit == 'illegal' ) THEN
2446	IF ( data_output_pr_user(1) /= ' ' ) THEN
2447	message_string = 'illegal value for data_output_pr or ' // &
2448	'data_output_pr_user = "' // &
2449	TRIM( data_output_pr(i) ) // '"'
2450	CALL message( 'check_parameters', 'PA0097', 1, 2, 0, 6, 0 )
2451	ELSE
2452	message_string = 'illegal value for data_output_pr = "' // &
2453	TRIM( data_output_pr(i) ) // '"'
2454	CALL message( 'check_parameters', 'PA0098', 1, 2, 0, 6, 0 )
2455	ENDIF
2456	ENDIF
2457
2458	END SELECT
2459
2460	!
2461	!-- Check to which of the predefined coordinate systems the profile belongs
2462	DO k = 1, crmax
2463	IF ( INDEX( cross_profiles(k), ' '//TRIM( data_output_pr(i) )//' ' ) &
2464	/=0 ) &
2465	THEN
2466	dopr_crossindex(i) = k
2467	EXIT
2468	ENDIF
2469	ENDDO
2470	!
2471	!-- Generate the text for the labels of the PROFIL output file. "-characters
2472	!-- must be substituted, otherwise PROFIL would interpret them as TeX
2473	!-- control characters
2474	dopr_label(i) = data_output_pr(i)
2475	position = INDEX( dopr_label(i) , '"' )
2476	DO WHILE ( position /= 0 )
2477	dopr_label(i)(position:position) = ''''
2478	position = INDEX( dopr_label(i) , '"' )
2479	ENDDO
2480
2481	ENDDO
2482
2483	!
2484	!-- y-value range of the coordinate system (PROFIL).
2485	!-- x-value range determined in plot_1d.
2486	IF ( .NOT. ocean ) THEN
2487	cross_uymin = 0.0
2488	IF ( z_max_do1d == -1.0 ) THEN
2489	cross_uymax = zu(nzt+1)
2490	ELSEIF ( z_max_do1d < zu(nzb+1) .OR. z_max_do1d > zu(nzt+1) ) THEN
2491	WRITE( message_string, * ) 'z_max_do1d = ', z_max_do1d, ' must ', &
2492	'be >= ', zu(nzb+1), ' or <= ', zu(nzt+1)
2493	CALL message( 'check_parameters', 'PA0099', 1, 2, 0, 6, 0 )
2494	ELSE
2495	cross_uymax = z_max_do1d
2496	ENDIF
2497	ENDIF
2498
2499	!
2500	!-- Check whether the chosen normalizing factor for the coordinate systems is
2501	!-- permissible
2502	DO i = 1, crmax
2503	SELECT CASE ( TRIM( cross_normalized_x(i) ) ) ! TRIM required on IBM
2504
2505	CASE ( '', 'wpt0', 'ws2', 'tsw2', 'ws3', 'ws2tsw', 'wstsw2' )
2506	j = 0
2507
2508	CASE DEFAULT
2509	message_string = 'unknown normalization method cross_normali' // &
2510	'zed_x = "' // TRIM( cross_normalized_x(i) ) // &
2511	'"'
2512	CALL message( 'check_parameters', 'PA0100', 1, 2, 0, 6, 0 )
2513
2514	END SELECT
2515	SELECT CASE ( TRIM( cross_normalized_y(i) ) ) ! TRIM required on IBM
2516
2517	CASE ( '', 'z_i' )
2518	j = 0
2519
2520	CASE DEFAULT
2521	message_string = 'unknown normalization method cross_normali' // &
2522	'zed_y = "' // TRIM( cross_normalized_y(i) ) // &
2523	'"'
2524	CALL message( 'check_parameters', 'PA0101', 1, 2, 0, 6, 0 )
2525
2526	END SELECT
2527	ENDDO
2528	!
2529	!-- Check normalized y-value range of the coordinate system (PROFIL)
2530	IF ( z_max_do1d_normalized /= -1.0 .AND. z_max_do1d_normalized <= 0.0 ) &
2531	THEN
2532	WRITE( message_string, * ) 'z_max_do1d_normalized = ', &
2533	z_max_do1d_normalized, ' must be >= 0.0'
2534	CALL message( 'check_parameters', 'PA0101', 1, 2, 0, 6, 0 )
2535	ENDIF
2536
2537
2538	!
2539	!-- Append user-defined data output variables to the standard data output
2540	IF ( data_output_user(1) /= ' ' ) THEN
2541	i = 1
2542	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
2543	i = i + 1
2544	ENDDO
2545	j = 1
2546	DO WHILE ( data_output_user(j) /= ' ' .AND. j <= 100 )
2547	IF ( i > 100 ) THEN
2548	message_string = 'number of output quantitities given by data' // &
2549	'_output and data_output_user exceeds the limit of 100'
2550	CALL message( 'check_parameters', 'PA0102', 1, 2, 0, 6, 0 )
2551	ENDIF
2552	data_output(i) = data_output_user(j)
2553	i = i + 1
2554	j = j + 1
2555	ENDDO
2556	ENDIF
2557
2558	!
2559	!-- Check and set steering parameters for 2d/3d data output and averaging
2560	i = 1
2561	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
2562	!
2563	!-- Check for data averaging
2564	ilen = LEN_TRIM( data_output(i) )
2565	j = 0 ! no data averaging
2566	IF ( ilen > 3 ) THEN
2567	IF ( data_output(i)(ilen-2:ilen) == '_av' ) THEN
2568	j = 1 ! data averaging
2569	data_output(i) = data_output(i)(1:ilen-3)
2570	ENDIF
2571	ENDIF
2572	!
2573	!-- Check for cross section or volume data
2574	ilen = LEN_TRIM( data_output(i) )
2575	k = 0 ! 3d data
2576	var = data_output(i)(1:ilen)
2577	IF ( ilen > 3 ) THEN
2578	IF ( data_output(i)(ilen-2:ilen) == '_xy' .OR. &
2579	data_output(i)(ilen-2:ilen) == '_xz' .OR. &
2580	data_output(i)(ilen-2:ilen) == '_yz' ) THEN
2581	k = 1 ! 2d data
2582	var = data_output(i)(1:ilen-3)
2583	ENDIF
2584	ENDIF
2585	!
2586	!-- Check for allowed value and set units
2587	SELECT CASE ( TRIM( var ) )
2588
2589	CASE ( 'e' )
2590	IF ( constant_diffusion ) THEN
2591	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2592	'res constant_diffusion = .FALSE.'
2593	CALL message( 'check_parameters', 'PA0103', 1, 2, 0, 6, 0 )
2594	ENDIF
2595	unit = 'm2/s2'
2596
2597	CASE ( 'lpt' )
2598	IF ( .NOT. cloud_physics ) THEN
2599	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2600	'res cloud_physics = .TRUE.'
2601	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2602	ENDIF
2603	unit = 'K'
2604
2605	CASE ( 'pc', 'pr' )
2606	IF ( .NOT. particle_advection ) THEN
2607	message_string = 'output of "' // TRIM( var ) // '" requir' // &
2608	'es a "particles_par"-NAMELIST in the parameter file (PARIN)'
2609	CALL message( 'check_parameters', 'PA0104', 1, 2, 0, 6, 0 )
2610	ENDIF
2611	IF ( TRIM( var ) == 'pc' ) unit = 'number'
2612	IF ( TRIM( var ) == 'pr' ) unit = 'm'
2613
2614	CASE ( 'q', 'vpt' )
2615	IF ( .NOT. humidity ) THEN
2616	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2617	'res humidity = .TRUE.'
2618	CALL message( 'check_parameters', 'PA0105', 1, 2, 0, 6, 0 )
2619	ENDIF
2620	IF ( TRIM( var ) == 'q' ) unit = 'kg/kg'
2621	IF ( TRIM( var ) == 'vpt' ) unit = 'K'
2622
2623	CASE ( 'ql' )
2624	IF ( .NOT. ( cloud_physics .OR. cloud_droplets ) ) THEN
2625	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2626	'res cloud_physics = .TRUE. or cloud_droplets = .TRUE.'
2627	CALL message( 'check_parameters', 'PA0106', 1, 2, 0, 6, 0 )
2628	ENDIF
2629	unit = 'kg/kg'
2630
2631	CASE ( 'ql_c', 'ql_v', 'ql_vp' )
2632	IF ( .NOT. cloud_droplets ) THEN
2633	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2634	'res cloud_droplets = .TRUE.'
2635	CALL message( 'check_parameters', 'PA0107', 1, 2, 0, 6, 0 )
2636	ENDIF
2637	IF ( TRIM( var ) == 'ql_c' ) unit = 'kg/kg'
2638	IF ( TRIM( var ) == 'ql_v' ) unit = 'm3'
2639	IF ( TRIM( var ) == 'ql_vp' ) unit = 'none'
2640
2641	CASE ( 'qv' )
2642	IF ( .NOT. cloud_physics ) THEN
2643	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2644	'res cloud_physics = .TRUE.'
2645	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2646	ENDIF
2647	unit = 'kg/kg'
2648
2649	CASE ( 'rho' )
2650	IF ( .NOT. ocean ) THEN
2651	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2652	'res ocean = .TRUE.'
2653	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
2654	ENDIF
2655	unit = 'kg/m3'
2656
2657	CASE ( 's' )
2658	IF ( .NOT. passive_scalar ) THEN
2659	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2660	'res passive_scalar = .TRUE.'
2661	CALL message( 'check_parameters', 'PA0110', 1, 2, 0, 6, 0 )
2662	ENDIF
2663	unit = 'conc'
2664
2665	CASE ( 'sa' )
2666	IF ( .NOT. ocean ) THEN
2667	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2668	'res ocean = .TRUE.'
2669	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
2670	ENDIF
2671	unit = 'psu'
2672
2673	CASE ( 'u', 't', 'lwp', 'pra', 'prr', 'qsws', 'shf', 'z0' )
2674	IF ( k == 0 .OR. data_output(i)(ilen-2:ilen) /= '_xy' ) THEN
2675	message_string = 'illegal value for data_output: "' // &
2676	TRIM( var ) // '" & only 2d-horizontal ' // &
2677	'cross sections are allowed for this value'
2678	CALL message( 'check_parameters', 'PA0111', 1, 2, 0, 6, 0 )
2679	ENDIF
2680	IF ( TRIM( var ) == 'lwp*' .AND. .NOT. cloud_physics ) THEN
2681	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2682	'res cloud_physics = .TRUE.'
2683	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2684	ENDIF
2685	IF ( TRIM( var ) == 'pra*' .AND. .NOT. precipitation ) THEN
2686	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2687	'res precipitation = .TRUE.'
2688	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2689	ENDIF
2690	IF ( TRIM( var ) == 'pra*' .AND. j == 1 ) THEN
2691	message_string = 'temporal averaging of precipitation ' // &
2692	'amount "' // TRIM( var ) // '" is not possible'
2693	CALL message( 'check_parameters', 'PA0113', 1, 2, 0, 6, 0 )
2694	ENDIF
2695	IF ( TRIM( var ) == 'prr*' .AND. .NOT. precipitation ) THEN
2696	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2697	'res precipitation = .TRUE.'
2698	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2699	ENDIF
2700	IF ( TRIM( var ) == 'qsws*' .AND. .NOT. humidity ) THEN
2701	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2702	'res humidity = .TRUE.'
2703	CALL message( 'check_parameters', 'PA0322', 1, 2, 0, 6, 0 )
2704	ENDIF
2705
2706	IF ( TRIM( var ) == 'lwp' ) unit = 'kg/kgm'
2707	IF ( TRIM( var ) == 'pra*' ) unit = 'mm'
2708	IF ( TRIM( var ) == 'prr*' ) unit = 'mm/s'
2709	IF ( TRIM( var ) == 'qsws*' ) unit = 'kgm/kgs'
2710	IF ( TRIM( var ) == 'shf' ) unit = 'Km/s'
2711	IF ( TRIM( var ) == 't*' ) unit = 'K'
2712	IF ( TRIM( var ) == 'u*' ) unit = 'm/s'
2713	IF ( TRIM( var ) == 'z0*' ) unit = 'm'
2714
2715
2716	CASE ( 'p', 'pt', 'u', 'v', 'w' )
2717	IF ( TRIM( var ) == 'p' ) unit = 'Pa'
2718	IF ( TRIM( var ) == 'pt' ) unit = 'K'
2719	IF ( TRIM( var ) == 'u' ) unit = 'm/s'
2720	IF ( TRIM( var ) == 'v' ) unit = 'm/s'
2721	IF ( TRIM( var ) == 'w' ) unit = 'm/s'
2722	CONTINUE
2723
2724	CASE DEFAULT
2725	CALL user_check_data_output( var, unit )
2726
2727	IF ( unit == 'illegal' ) THEN
2728	IF ( data_output_user(1) /= ' ' ) THEN
2729	message_string = 'illegal value for data_output or ' // &
2730	'data_output_user = "' // TRIM( data_output(i) ) // '"'
2731	CALL message( 'check_parameters', 'PA0114', 1, 2, 0, 6, 0 )
2732	ELSE
2733	message_string = 'illegal value for data_output =' // &
2734	TRIM( data_output(i) ) // '"'
2735	CALL message( 'check_parameters', 'PA0115', 1, 2, 0, 6, 0 )
2736	ENDIF
2737	ENDIF
2738
2739	END SELECT
2740	!
2741	!-- Set the internal steering parameters appropriately
2742	IF ( k == 0 ) THEN
2743	do3d_no(j) = do3d_no(j) + 1
2744	do3d(j,do3d_no(j)) = data_output(i)
2745	do3d_unit(j,do3d_no(j)) = unit
2746	ELSE
2747	do2d_no(j) = do2d_no(j) + 1
2748	do2d(j,do2d_no(j)) = data_output(i)
2749	do2d_unit(j,do2d_no(j)) = unit
2750	IF ( data_output(i)(ilen-2:ilen) == '_xy' ) THEN
2751	data_output_xy(j) = .TRUE.
2752	ENDIF
2753	IF ( data_output(i)(ilen-2:ilen) == '_xz' ) THEN
2754	data_output_xz(j) = .TRUE.
2755	ENDIF
2756	IF ( data_output(i)(ilen-2:ilen) == '_yz' ) THEN
2757	data_output_yz(j) = .TRUE.
2758	ENDIF
2759	ENDIF
2760
2761	IF ( j == 1 ) THEN
2762	!
2763	!-- Check, if variable is already subject to averaging
2764	found = .FALSE.
2765	DO k = 1, doav_n
2766	IF ( TRIM( doav(k) ) == TRIM( var ) ) found = .TRUE.
2767	ENDDO
2768
2769	IF ( .NOT. found ) THEN
2770	doav_n = doav_n + 1
2771	doav(doav_n) = var
2772	ENDIF
2773	ENDIF
2774
2775	i = i + 1
2776	ENDDO
2777
2778	!
2779	!-- Averaged 2d or 3d output requires that an averaging interval has been set
2780	IF ( doav_n > 0 .AND. averaging_interval == 0.0 ) THEN
2781	WRITE( message_string, * ) 'output of averaged quantity "', &
2782	TRIM( doav(1) ), '_av" requires to set a ', &
2783	'non-zero & averaging interval'
2784	CALL message( 'check_parameters', 'PA0323', 1, 2, 0, 6, 0 )
2785	ENDIF
2786
2787	!
2788	!-- Check sectional planes and store them in one shared array
2789	IF ( ANY( section_xy > nz + 1 ) ) THEN
2790	WRITE( message_string, * ) 'section_xy must be <= nz + 1 = ', nz + 1
2791	CALL message( 'check_parameters', 'PA0319', 1, 2, 0, 6, 0 )
2792	ENDIF
2793	IF ( ANY( section_xz > ny + 1 ) ) THEN
2794	WRITE( message_string, * ) 'section_xz must be <= ny + 1 = ', ny + 1
2795	CALL message( 'check_parameters', 'PA0320', 1, 2, 0, 6, 0 )
2796	ENDIF
2797	IF ( ANY( section_yz > nx + 1 ) ) THEN
2798	WRITE( message_string, * ) 'section_yz must be <= nx + 1 = ', nx + 1
2799	CALL message( 'check_parameters', 'PA0321', 1, 2, 0, 6, 0 )
2800	ENDIF
2801	section(:,1) = section_xy
2802	section(:,2) = section_xz
2803	section(:,3) = section_yz
2804
2805	!
2806	!-- Upper plot limit (grid point value) for 1D profiles
2807	IF ( z_max_do1d == -1.0 ) THEN
2808
2809	nz_do1d = nzt+1
2810
2811	ELSE
2812	DO k = nzb+1, nzt+1
2813	nz_do1d = k
2814	IF ( zw(k) > z_max_do1d ) EXIT
2815	ENDDO
2816	ENDIF
2817
2818	!
2819	!-- Upper plot limit for 2D vertical sections
2820	IF ( z_max_do2d == -1.0 ) z_max_do2d = zu(nzt)
2821	IF ( z_max_do2d < zu(nzb+1) .OR. z_max_do2d > zu(nzt) ) THEN
2822	WRITE( message_string, * ) 'z_max_do2d = ', z_max_do2d, &
2823	' must be >= ', zu(nzb+1), '(zu(nzb+1)) and <= ', zu(nzt), &
2824	' (zu(nzt))'
2825	CALL message( 'check_parameters', 'PA0116', 1, 2, 0, 6, 0 )
2826	ENDIF
2827
2828	!
2829	!-- Upper plot limit for 3D arrays
2830	IF ( nz_do3d == -9999 ) nz_do3d = nzt + 1
2831
2832	!
2833	!-- Determine and check accuracy for compressed 3D plot output
2834	IF ( do3d_compress ) THEN
2835	!
2836	!-- Compression only permissible on T3E machines
2837	IF ( host(1:3) /= 't3e' ) THEN
2838	message_string = 'do3d_compress = .TRUE. not allowed on host "' // &
2839	TRIM( host ) // '"'
2840	CALL message( 'check_parameters', 'PA0117', 1, 2, 0, 6, 0 )
2841	ENDIF
2842
2843	i = 1
2844	DO WHILE ( do3d_comp_prec(i) /= ' ' )
2845
2846	ilen = LEN_TRIM( do3d_comp_prec(i) )
2847	IF ( LLT( do3d_comp_prec(i)(ilen:ilen), '0' ) .OR. &
2848	LGT( do3d_comp_prec(i)(ilen:ilen), '9' ) ) THEN
2849	WRITE( message_string, * ) 'illegal precision: do3d_comp_prec', &
2850	'(', i, ') = "', TRIM(do3d_comp_prec(i)),'"'
2851	CALL message( 'check_parameters', 'PA0118', 1, 2, 0, 6, 0 )
2852	ENDIF
2853
2854	prec = IACHAR( do3d_comp_prec(i)(ilen:ilen) ) - IACHAR( '0' )
2855	var = do3d_comp_prec(i)(1:ilen-1)
2856
2857	SELECT CASE ( var )
2858
2859	CASE ( 'u' )
2860	j = 1
2861	CASE ( 'v' )
2862	j = 2
2863	CASE ( 'w' )
2864	j = 3
2865	CASE ( 'p' )
2866	j = 4
2867	CASE ( 'pt' )
2868	j = 5
2869
2870	CASE DEFAULT
2871	WRITE( message_string, * ) 'unknown variable "', &
2872	TRIM( do3d_comp_prec(i) ), '" given for do3d_comp_prec(', &
2873	i, ')'
2874	CALL message( 'check_parameters', 'PA0119', 1, 2, 0, 6, 0 )
2875
2876	END SELECT
2877
2878	plot_3d_precision(j)%precision = prec
2879	i = i + 1
2880
2881	ENDDO
2882	ENDIF
2883
2884	!
2885	!-- Check the data output format(s)
2886	IF ( data_output_format(1) == ' ' ) THEN
2887	!
2888	!-- Default value
2889	netcdf_output = .TRUE.
2890	ELSE
2891	i = 1
2892	DO WHILE ( data_output_format(i) /= ' ' )
2893
2894	SELECT CASE ( data_output_format(i) )
2895
2896	CASE ( 'netcdf' )
2897	netcdf_output = .TRUE.
2898	CASE ( 'iso2d' )
2899	iso2d_output = .TRUE.
2900	CASE ( 'profil' )
2901	profil_output = .TRUE.
2902	CASE ( 'avs' )
2903	avs_output = .TRUE.
2904
2905	CASE DEFAULT
2906	message_string = 'unknown value for data_output_format "' // &
2907	TRIM( data_output_format(i) ) // '"'
2908	CALL message( 'check_parameters', 'PA0120', 1, 2, 0, 6, 0 )
2909
2910	END SELECT
2911
2912	i = i + 1
2913	IF ( i > 10 ) EXIT
2914
2915	ENDDO
2916
2917	ENDIF
2918
2919	!
2920	!-- Check mask conditions
2921	DO mid = 1, max_masks
2922	IF ( data_output_masks(mid,1) /= ' ' .OR. &
2923	data_output_masks_user(mid,1) /= ' ' ) THEN
2924	masks = masks + 1
2925	ENDIF
2926	ENDDO
2927
2928	IF ( masks < 0 .OR. masks > max_masks ) THEN
2929	WRITE( message_string, * ) 'illegal value: masks must be >= 0 and ', &
2930	'<= ', max_masks, ' (=max_masks)'
2931	CALL message( 'check_parameters', 'PA0325', 1, 2, 0, 6, 0 )
2932	ENDIF
2933	IF ( masks > 0 ) THEN
2934	mask_scale(1) = mask_scale_x
2935	mask_scale(2) = mask_scale_y
2936	mask_scale(3) = mask_scale_z
2937	IF ( ANY( mask_scale <= 0.0 ) ) THEN
2938	WRITE( message_string, * ) &
2939	'illegal value: mask_scale_x, mask_scale_y and mask_scale_z', &
2940	'must be > 0.0'
2941	CALL message( 'check_parameters', 'PA0326', 1, 2, 0, 6, 0 )
2942	ENDIF
2943	!
2944	!-- Generate masks for masked data output
2945	CALL init_masks
2946	ENDIF
2947
2948	!
2949	!-- Check the NetCDF data format
2950	IF ( netcdf_data_format > 2 ) THEN
2951	#if defined( __netcdf4 )
2952	CONTINUE
2953	#else
2954	message_string = 'NetCDF: NetCDF4 format requested but no ' // &
2955	'cpp-directive __netcdf4 given & switch ' // &
2956	'back to 64-bit offset format'
2957	CALL message( 'check_parameters', 'PA0171', 0, 1, 0, 6, 0 )
2958	netcdf_data_format = 2
2959	#endif
2960	ENDIF
2961
2962	!
2963
2964	#if ! defined( __check )
2965	!-- Check netcdf precison
2966	ldum = .FALSE.
2967	CALL define_netcdf_header( 'ch', ldum, 0 )
2968	#endif
2969	!
2970	!-- Check, whether a constant diffusion coefficient shall be used
2971	IF ( km_constant /= -1.0 ) THEN
2972	IF ( km_constant < 0.0 ) THEN
2973	WRITE( message_string, * ) 'km_constant = ', km_constant, ' < 0.0'
2974	CALL message( 'check_parameters', 'PA0121', 1, 2, 0, 6, 0 )
2975	ELSE
2976	IF ( prandtl_number < 0.0 ) THEN
2977	WRITE( message_string, * ) 'prandtl_number = ', prandtl_number, &
2978	' < 0.0'
2979	CALL message( 'check_parameters', 'PA0122', 1, 2, 0, 6, 0 )
2980	ENDIF
2981	constant_diffusion = .TRUE.
2982
2983	IF ( prandtl_layer ) THEN
2984	message_string = 'prandtl_layer is not allowed with fixed ' // &
2985	'value of km'
2986	CALL message( 'check_parameters', 'PA0123', 1, 2, 0, 6, 0 )
2987	ENDIF
2988	ENDIF
2989	ENDIF
2990
2991	!
2992	!-- In case of non-cyclic lateral boundaries, set the default maximum value
2993	!-- for the horizontal diffusivity used within the outflow damping layer,
2994	!-- and check/set the width of the damping layer
2995	IF ( bc_lr /= 'cyclic' ) THEN
2996	IF ( km_damp_max == -1.0 ) THEN
2997	km_damp_max = 0.5 * dx
2998	ENDIF
2999	IF ( outflow_damping_width == -1.0 ) THEN
3000	outflow_damping_width = MIN( 20, nx/2 )
3001	ENDIF
3002	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > nx ) THEN
3003	message_string = 'outflow_damping width out of range'
3004	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
3005	ENDIF
3006	ENDIF
3007
3008	IF ( bc_ns /= 'cyclic' ) THEN
3009	IF ( km_damp_max == -1.0 ) THEN
3010	km_damp_max = 0.5 * dy
3011	ENDIF
3012	IF ( outflow_damping_width == -1.0 ) THEN
3013	outflow_damping_width = MIN( 20, ny/2 )
3014	ENDIF
3015	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > ny ) THEN
3016	message_string = 'outflow_damping width out of range'
3017	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
3018	ENDIF
3019	ENDIF
3020
3021	!
3022	!-- Check value range for rif
3023	IF ( rif_min >= rif_max ) THEN
3024	WRITE( message_string, * ) 'rif_min = ', rif_min, ' must be less ', &
3025	'than rif_max = ', rif_max
3026	CALL message( 'check_parameters', 'PA0125', 1, 2, 0, 6, 0 )
3027	ENDIF
3028
3029	!
3030	!-- Determine upper and lower hight level indices for random perturbations
3031	IF ( disturbance_level_b == -9999999.9 ) THEN
3032	IF ( ocean ) THEN
3033	disturbance_level_b = zu((nzt*2)/3)
3034	disturbance_level_ind_b = ( nzt * 2 ) / 3
3035	ELSE
3036	disturbance_level_b = zu(nzb+3)
3037	disturbance_level_ind_b = nzb + 3
3038	ENDIF
3039	ELSEIF ( disturbance_level_b < zu(3) ) THEN
3040	WRITE( message_string, * ) 'disturbance_level_b = ', &
3041	disturbance_level_b, ' must be >= ', zu(3), '(zu(3))'
3042	CALL message( 'check_parameters', 'PA0126', 1, 2, 0, 6, 0 )
3043	ELSEIF ( disturbance_level_b > zu(nzt-2) ) THEN
3044	WRITE( message_string, * ) 'disturbance_level_b = ', &
3045	disturbance_level_b, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
3046	CALL message( 'check_parameters', 'PA0127', 1, 2, 0, 6, 0 )
3047	ELSE
3048	DO k = 3, nzt-2
3049	IF ( disturbance_level_b <= zu(k) ) THEN
3050	disturbance_level_ind_b = k
3051	EXIT
3052	ENDIF
3053	ENDDO
3054	ENDIF
3055
3056	IF ( disturbance_level_t == -9999999.9 ) THEN
3057	IF ( ocean ) THEN
3058	disturbance_level_t = zu(nzt-3)
3059	disturbance_level_ind_t = nzt - 3
3060	ELSE
3061	disturbance_level_t = zu(nzt/3)
3062	disturbance_level_ind_t = nzt / 3
3063	ENDIF
3064	ELSEIF ( disturbance_level_t > zu(nzt-2) ) THEN
3065	WRITE( message_string, * ) 'disturbance_level_t = ', &
3066	disturbance_level_t, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
3067	CALL message( 'check_parameters', 'PA0128', 1, 2, 0, 6, 0 )
3068	ELSEIF ( disturbance_level_t < disturbance_level_b ) THEN
3069	WRITE( message_string, * ) 'disturbance_level_t = ', &
3070	disturbance_level_t, ' must be >= disturbance_level_b = ', &
3071	disturbance_level_b
3072	CALL message( 'check_parameters', 'PA0129', 1, 2, 0, 6, 0 )
3073	ELSE
3074	DO k = 3, nzt-2
3075	IF ( disturbance_level_t <= zu(k) ) THEN
3076	disturbance_level_ind_t = k
3077	EXIT
3078	ENDIF
3079	ENDDO
3080	ENDIF
3081
3082	!
3083	!-- Check again whether the levels determined this way are ok.
3084	!-- Error may occur at automatic determination and too few grid points in
3085	!-- z-direction.
3086	IF ( disturbance_level_ind_t < disturbance_level_ind_b ) THEN
3087	WRITE( message_string, * ) 'disturbance_level_ind_t = ', &
3088	disturbance_level_ind_t, ' must be >= disturbance_level_b = ', &
3089	disturbance_level_b
3090	CALL message( 'check_parameters', 'PA0130', 1, 2, 0, 6, 0 )
3091	ENDIF
3092
3093	!
3094	!-- Determine the horizontal index range for random perturbations.
3095	!-- In case of non-cyclic horizontal boundaries, no perturbations are imposed
3096	!-- near the inflow and the perturbation area is further limited to ...(1)
3097	!-- after the initial phase of the flow.
3098	dist_nxl = 0; dist_nxr = nx
3099	dist_nys = 0; dist_nyn = ny
3100	IF ( bc_lr /= 'cyclic' ) THEN
3101	IF ( inflow_disturbance_begin == -1 ) THEN
3102	inflow_disturbance_begin = MIN( 10, nx/2 )
3103	ENDIF
3104	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > nx )&
3105	THEN
3106	message_string = 'inflow_disturbance_begin out of range'
3107	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
3108	ENDIF
3109	IF ( inflow_disturbance_end == -1 ) THEN
3110	inflow_disturbance_end = MIN( 100, 3*nx/4 )
3111	ENDIF
3112	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > nx ) &
3113	THEN
3114	message_string = 'inflow_disturbance_end out of range'
3115	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
3116	ENDIF
3117	ELSEIF ( bc_ns /= 'cyclic' ) THEN
3118	IF ( inflow_disturbance_begin == -1 ) THEN
3119	inflow_disturbance_begin = MIN( 10, ny/2 )
3120	ENDIF
3121	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > ny )&
3122	THEN
3123	message_string = 'inflow_disturbance_begin out of range'
3124	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
3125	ENDIF
3126	IF ( inflow_disturbance_end == -1 ) THEN
3127	inflow_disturbance_end = MIN( 100, 3*ny/4 )
3128	ENDIF
3129	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > ny ) &
3130	THEN
3131	message_string = 'inflow_disturbance_end out of range'
3132	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
3133	ENDIF
3134	ENDIF
3135
3136	IF ( bc_lr == 'radiation/dirichlet' ) THEN
3137	dist_nxr = nx - inflow_disturbance_begin
3138	dist_nxl(1) = nx - inflow_disturbance_end
3139	ELSEIF ( bc_lr == 'dirichlet/radiation' ) THEN
3140	dist_nxl = inflow_disturbance_begin
3141	dist_nxr(1) = inflow_disturbance_end
3142	ENDIF
3143	IF ( bc_ns == 'dirichlet/radiation' ) THEN
3144	dist_nyn = ny - inflow_disturbance_begin
3145	dist_nys(1) = ny - inflow_disturbance_end
3146	ELSEIF ( bc_ns == 'radiation/dirichlet' ) THEN
3147	dist_nys = inflow_disturbance_begin
3148	dist_nyn(1) = inflow_disturbance_end
3149	ENDIF
3150
3151	!
3152	!-- A turbulent inflow requires Dirichlet conditions at the respective inflow
3153	!-- boundary (so far, a turbulent inflow is realized from the left side only)
3154	IF ( turbulent_inflow .AND. bc_lr /= 'dirichlet/radiation' ) THEN
3155	message_string = 'turbulent_inflow = .T. requires a Dirichlet ' // &
3156	'condition at the inflow boundary'
3157	CALL message( 'check_parameters', 'PA0133', 1, 2, 0, 6, 0 )
3158	ENDIF
3159
3160	!
3161	!-- In case of turbulent inflow calculate the index of the recycling plane
3162	IF ( turbulent_inflow ) THEN
3163	IF ( recycling_width == 9999999.9 ) THEN
3164	!
3165	!-- Set the default value for the width of the recycling domain
3166	recycling_width = 0.1 * nx * dx
3167	ELSE
3168	IF ( recycling_width < dx .OR. recycling_width > nx * dx ) THEN
3169	WRITE( message_string, * ) 'illegal value for recycling_width:', &
3170	' ', recycling_width
3171	CALL message( 'check_parameters', 'PA0134', 1, 2, 0, 6, 0 )
3172	ENDIF
3173	ENDIF
3174	!
3175	!-- Calculate the index
3176	recycling_plane = recycling_width / dx
3177	ENDIF
3178
3179	!
3180	!-- Check random generator
3181	IF ( random_generator /= 'system-specific' .AND. &
3182	random_generator /= 'numerical-recipes' ) THEN
3183	message_string = 'unknown random generator: random_generator = "' // &
3184	TRIM( random_generator ) // '"'
3185	CALL message( 'check_parameters', 'PA0135', 1, 2, 0, 6, 0 )
3186	ENDIF
3187
3188	!
3189	!-- Determine damping level index for 1D model
3190	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
3191	IF ( damp_level_1d == -1.0 ) THEN
3192	damp_level_1d = zu(nzt+1)
3193	damp_level_ind_1d = nzt + 1
3194	ELSEIF ( damp_level_1d < 0.0 .OR. damp_level_1d > zu(nzt+1) ) THEN
3195	WRITE( message_string, * ) 'damp_level_1d = ', damp_level_1d, &
3196	' must be > 0.0 and < ', zu(nzt+1), '(zu(nzt+1))'
3197	CALL message( 'check_parameters', 'PA0136', 1, 2, 0, 6, 0 )
3198	ELSE
3199	DO k = 1, nzt+1
3200	IF ( damp_level_1d <= zu(k) ) THEN
3201	damp_level_ind_1d = k
3202	EXIT
3203	ENDIF
3204	ENDDO
3205	ENDIF
3206	ENDIF
3207
3208	!
3209	!-- Check some other 1d-model parameters
3210	IF ( TRIM( mixing_length_1d ) /= 'as_in_3d_model' .AND. &
3211	TRIM( mixing_length_1d ) /= 'blackadar' ) THEN
3212	message_string = 'mixing_length_1d = "' // TRIM( mixing_length_1d ) // &
3213	'" is unknown'
3214	CALL message( 'check_parameters', 'PA0137', 1, 2, 0, 6, 0 )
3215	ENDIF
3216	IF ( TRIM( dissipation_1d ) /= 'as_in_3d_model' .AND. &
3217	TRIM( dissipation_1d ) /= 'detering' ) THEN
3218	message_string = 'dissipation_1d = "' // TRIM( dissipation_1d ) // &
3219	'" is unknown'
3220	CALL message( 'check_parameters', 'PA0138', 1, 2, 0, 6, 0 )
3221	ENDIF
3222
3223	!
3224	!-- Set time for the next user defined restart (time_restart is the
3225	!-- internal parameter for steering restart events)
3226	IF ( restart_time /= 9999999.9 ) THEN
3227	IF ( restart_time > time_since_reference_point ) THEN
3228	time_restart = restart_time
3229	ENDIF
3230	ELSE
3231	!
3232	!-- In case of a restart run, set internal parameter to default (no restart)
3233	!-- if the NAMELIST-parameter restart_time is omitted
3234	time_restart = 9999999.9
3235	ENDIF
3236
3237	!
3238	!-- Set default value of the time needed to terminate a model run
3239	IF ( termination_time_needed == -1.0 ) THEN
3240	IF ( host(1:3) == 'ibm' ) THEN
3241	termination_time_needed = 300.0
3242	ELSE
3243	termination_time_needed = 35.0
3244	ENDIF
3245	ENDIF
3246
3247	!
3248	!-- Check the time needed to terminate a model run
3249	IF ( host(1:3) == 't3e' ) THEN
3250	!
3251	!-- Time needed must be at least 30 seconds on all CRAY machines, because
3252	!-- MPP_TREMAIN gives the remaining CPU time only in steps of 30 seconds
3253	IF ( termination_time_needed <= 30.0 ) THEN
3254	WRITE( message_string, * ) 'termination_time_needed = ', &
3255	termination_time_needed, ' must be > 30.0 on host "', &
3256	TRIM( host ), '"'
3257	CALL message( 'check_parameters', 'PA0139', 1, 2, 0, 6, 0 )
3258	ENDIF
3259	ELSEIF ( host(1:3) == 'ibm' ) THEN
3260	!
3261	!-- On IBM-regatta machines the time should be at least 300 seconds,
3262	!-- because the job time consumed before executing palm (for compiling,
3263	!-- copying of files, etc.) has to be regarded
3264	IF ( termination_time_needed < 300.0 ) THEN
3265	WRITE( message_string, * ) 'termination_time_needed = ', &
3266	termination_time_needed, ' should be >= 300.0 on host "', &
3267	TRIM( host ), '"'
3268	CALL message( 'check_parameters', 'PA0140', 1, 2, 0, 6, 0 )
3269	ENDIF
3270	ENDIF
3271
3272	!
3273	!-- Check pressure gradient conditions
3274	IF ( dp_external .AND. conserve_volume_flow ) THEN
3275	WRITE( message_string, * ) 'Both dp_external and conserve_volume_flo', &
3276	'w are .TRUE. but one of them must be .FALSE.'
3277	CALL message( 'check_parameters', 'PA0150', 1, 2, 0, 6, 0 )
3278	ENDIF
3279	IF ( dp_external ) THEN
3280	IF ( dp_level_b < zu(nzb) .OR. dp_level_b > zu(nzt) ) THEN
3281	WRITE( message_string, * ) 'dp_level_b = ', dp_level_b, ' is out ', &
3282	' of range'
3283	CALL message( 'check_parameters', 'PA0151', 1, 2, 0, 6, 0 )
3284	ENDIF
3285	IF ( .NOT. ANY( dpdxy /= 0.0 ) ) THEN
3286	WRITE( message_string, * ) 'dp_external is .TRUE. but dpdxy is ze', &
3287	'ro, i.e. the external pressure gradient & will not be applied'
3288	CALL message( 'check_parameters', 'PA0152', 0, 1, 0, 6, 0 )
3289	ENDIF
3290	ENDIF
3291	IF ( ANY( dpdxy /= 0.0 ) .AND. .NOT. dp_external ) THEN
3292	WRITE( message_string, * ) 'dpdxy is nonzero but dp_external is ', &
3293	'.FALSE., i.e. the external pressure gradient & will not be applied'
3294	CALL message( 'check_parameters', 'PA0153', 0, 1, 0, 6, 0 )
3295	ENDIF
3296	IF ( conserve_volume_flow ) THEN
3297	IF ( TRIM( conserve_volume_flow_mode ) == 'default' ) THEN
3298
3299	conserve_volume_flow_mode = 'initial_profiles'
3300
3301	ELSEIF ( TRIM( conserve_volume_flow_mode ) /= 'initial_profiles' .AND. &
3302	TRIM( conserve_volume_flow_mode ) /= 'inflow_profile' .AND. &
3303	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) THEN
3304	WRITE( message_string, * ) 'unknown conserve_volume_flow_mode: ', &
3305	conserve_volume_flow_mode
3306	CALL message( 'check_parameters', 'PA0154', 1, 2, 0, 6, 0 )
3307	ENDIF
3308	IF ( (bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic') .AND. &
3309	TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
3310	WRITE( message_string, * ) 'non-cyclic boundary conditions ', &
3311	'require conserve_volume_flow_mode = ''initial_profiles'''
3312	CALL message( 'check_parameters', 'PA0155', 1, 2, 0, 6, 0 )
3313	ENDIF
3314	IF ( bc_lr == 'cyclic' .AND. bc_ns == 'cyclic' .AND. &
3315	TRIM( conserve_volume_flow_mode ) == 'inflow_profile' ) THEN
3316	WRITE( message_string, * ) 'cyclic boundary conditions ', &
3317	'require conserve_volume_flow_mode = ''initial_profiles''', &
3318	' or ''bulk_velocity'''
3319	CALL message( 'check_parameters', 'PA0156', 1, 2, 0, 6, 0 )
3320	ENDIF
3321	ENDIF
3322	IF ( ( u_bulk /= 0.0 .OR. v_bulk /= 0.0 ) .AND. &
3323	( .NOT. conserve_volume_flow .OR. &
3324	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) ) THEN
3325	WRITE( message_string, * ) 'nonzero bulk velocity requires ', &
3326	'conserve_volume_flow = .T. and ', &
3327	'conserve_volume_flow_mode = ''bulk_velocity'''
3328	CALL message( 'check_parameters', 'PA0157', 1, 2, 0, 6, 0 )
3329	ENDIF
3330
3331	!
3332	!-- Check particle attributes
3333	IF ( particle_color /= 'none' ) THEN
3334	IF ( particle_color /= 'absuv' .AND. particle_color /= 'pt*' .AND. &
3335	particle_color /= 'z' ) THEN
3336	message_string = 'illegal value for parameter particle_color: ' // &
3337	TRIM( particle_color)
3338	CALL message( 'check_parameters', 'PA0313', 1, 2, 0, 6, 0 )
3339	ELSE
3340	IF ( color_interval(2) <= color_interval(1) ) THEN
3341	message_string = 'color_interval(2) <= color_interval(1)'
3342	CALL message( 'check_parameters', 'PA0315', 1, 2, 0, 6, 0 )
3343	ENDIF
3344	ENDIF
3345	ENDIF
3346
3347	IF ( particle_dvrpsize /= 'none' ) THEN
3348	IF ( particle_dvrpsize /= 'absw' ) THEN
3349	message_string = 'illegal value for parameter particle_dvrpsize:' // &
3350	' ' // TRIM( particle_color)
3351	CALL message( 'check_parameters', 'PA0314', 1, 2, 0, 6, 0 )
3352	ELSE
3353	IF ( dvrpsize_interval(2) <= dvrpsize_interval(1) ) THEN
3354	message_string = 'dvrpsize_interval(2) <= dvrpsize_interval(1)'
3355	CALL message( 'check_parameters', 'PA0316', 1, 2, 0, 6, 0 )
3356	ENDIF
3357	ENDIF
3358	ENDIF
3359
3360	!
3361	!-- Check &userpar parameters
3362	CALL user_check_parameters
3363
3364
3365
3366	END SUBROUTINE check_parameters

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |