Home

Context Navigation

source: palm/trunk/SOURCE/check_parameters.f90 @ 76

Last change on this file since 76 was 75, checked in by raasch, 17 years ago
preliminary update for changes concerning non-cyclic boundary conditions
Property svn:keywords set to `Id`
File size: 86.5 KB

Line
1	SUBROUTINE check_parameters
2
3	!------------------------------------------------------------------------------!
4	! Actual revisions:
5	! -----------------
6	! "by_user" allowed as initializing action, -data_output_ts,
7	! leapfrog with non-flat topography not allowed any more, loop_optimization
8	! and pt_reference are checked, moisture renamed humidity,
9	! output of precipitation amount/rate and roughnes length + check
10	! possible negative humidities are avoided in initial profile,
11	! dirichlet/neumann changed to dirichlet/radiation, etc.,
12	! revision added to run_description_header
13	!
14	! Former revisions:
15	! -----------------
16	! $Id: check_parameters.f90 75 2007-03-22 09:54:05Z raasch $
17	!
18	! 20 2007-02-26 00:12:32Z raasch
19	! Temperature and humidity gradients at top are now calculated for nzt+1,
20	! top_heatflux and respective boundary condition bc_pt_t is checked
21	!
22	! RCS Log replace by Id keyword, revision history cleaned up
23	!
24	! Revision 1.61 2006/08/04 14:20:25 raasch
25	! do2d_unit and do3d_unit now defined as 2d-arrays, check of
26	! use_upstream_for_tke, default value for dt_dopts,
27	! generation of file header moved from routines palm and header to here
28	!
29	! Revision 1.1 1997/08/26 06:29:23 raasch
30	! Initial revision
31	!
32	!
33	! Description:
34	! ------------
35	! Check control parameters and deduce further quantities.
36	!------------------------------------------------------------------------------!
37
38	USE arrays_3d
39	USE constants
40	USE control_parameters
41	USE grid_variables
42	USE indices
43	USE model_1d
44	USE netcdf_control
45	USE particle_attributes
46	USE pegrid
47	USE profil_parameter
48	USE statistics
49	USE transpose_indices
50
51	IMPLICIT NONE
52
53	CHARACTER (LEN=1) :: sq
54	CHARACTER (LEN=6) :: var
55	CHARACTER (LEN=7) :: unit
56	CHARACTER (LEN=8) :: date
57	CHARACTER (LEN=10) :: time
58	CHARACTER (LEN=100) :: action
59
60	INTEGER :: i, ilen, intervals, iter, j, k, nnxh, nnyh, position, prec
61	LOGICAL :: found, ldum
62	REAL :: gradient, maxn, maxp
63
64
65	!
66	!-- Warning, if host is not set
67	IF ( host(1:1) == ' ' ) THEN
68	IF ( myid == 0 ) THEN
69	PRINT*, '+++ WARNING: check_parameters:'
70	PRINT*, ' "host" is not set. Please check that environment', &
71	' variable "localhost"'
72	PRINT*, ' is set before running PALM'
73	ENDIF
74	ENDIF
75
76	!
77	!-- Generate the file header which is used as a header for most of PALM's
78	!-- output files
79	CALL DATE_AND_TIME( date, time )
80	run_date = date(7:8)//'-'//date(5:6)//'-'//date(3:4)
81	run_time = time(1:2)//':'//time(3:4)//':'//time(5:6)
82
83	WRITE ( run_description_header, '(A,2X,A,2X,A,A,A,I2.2,2X,A,A,2X,A,1X,A)' )&
84	TRIM( version ), TRIM( revision ), &
85	'run: ', TRIM( run_identifier ), '.', &
86	runnr, 'host: ', TRIM( host ), run_date, run_time
87
88	!
89	!-- Check the general loop optimization method
90	IF ( loop_optimization == 'default' ) THEN
91	IF ( host(1:3) == 'nec' ) THEN
92	loop_optimization = 'vector'
93	ELSE
94	loop_optimization = 'cache'
95	ENDIF
96	ENDIF
97	IF ( loop_optimization /= 'noopt' .AND. loop_optimization /= 'cache' &
98	.AND. loop_optimization /= 'vector' ) THEN
99	IF ( myid == 0 ) THEN
100	PRINT*, '+++ check_parameters:'
101	PRINT*, ' illegal value given for loop_optimization: ', &
102	TRIM( loop_optimization )
103	ENDIF
104	CALL local_stop
105	ENDIF
106
107	!
108	!-- Check topography setting (check for illegal parameter combinations)
109	IF ( topography /= 'flat' ) THEN
110	action = ' '
111	IF ( scalar_advec /= 'pw-scheme' ) THEN
112	WRITE( action, '(A,A)' ) 'scalar_advec = ', scalar_advec
113	ENDIF
114	IF ( momentum_advec /= 'pw-scheme' ) THEN
115	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
116	ENDIF
117	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
118	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
119	ENDIF
120	IF ( psolver == 'multigrid' .OR. psolver == 'sor' ) THEN
121	WRITE( action, '(A,A)' ) 'psolver = ', psolver
122	ENDIF
123	IF ( sloping_surface ) THEN
124	WRITE( action, '(A)' ) 'sloping surface = .TRUE.'
125	ENDIF
126	IF ( galilei_transformation ) THEN
127	WRITE( action, '(A)' ) 'galilei_transformation = .TRUE.'
128	ENDIF
129	IF ( cloud_physics ) THEN
130	WRITE( action, '(A)' ) 'cloud_physics = .TRUE.'
131	ENDIF
132	IF ( cloud_droplets ) THEN
133	WRITE( action, '(A)' ) 'cloud_droplets = .TRUE.'
134	ENDIF
135	IF ( humidity ) THEN
136	WRITE( action, '(A)' ) 'humidity = .TRUE.'
137	ENDIF
138	IF ( .NOT. prandtl_layer ) THEN
139	WRITE( action, '(A)' ) 'prandtl_layer = .FALSE.'
140	ENDIF
141	IF ( action /= ' ' ) THEN
142	IF ( myid == 0 ) THEN
143	PRINT*, '+++ check_parameters:'
144	PRINT*, ' a non-flat topography does not allow ', TRIM( action )
145	ENDIF
146	CALL local_stop
147	ENDIF
148	ENDIF
149	!
150	!-- Check whether there are any illegal values
151	!-- Pressure solver:
152	IF ( psolver /= 'poisfft' .AND. psolver /= 'poisfft_hybrid' .AND. &
153	psolver /= 'sor' .AND. psolver /= 'multigrid' ) THEN
154	IF ( myid == 0 ) THEN
155	PRINT*, '+++ check_parameters:'
156	PRINT*, ' unknown solver for perturbation pressure: psolver=', &
157	psolver
158	ENDIF
159	CALL local_stop
160	ENDIF
161
162	#if defined( __parallel )
163	IF ( psolver == 'poisfft_hybrid' .AND. pdims(2) /= 1 ) THEN
164	IF ( myid == 0 ) THEN
165	PRINT*, '+++ check_parameters:'
166	PRINT*, ' psolver="', TRIM( psolver ), '" only works for a ', &
167	'1d domain-decomposition along x'
168	PRINT*, ' please do not set npey/=1 in the parameter file'
169	ENDIF
170	CALL local_stop
171	ENDIF
172	IF ( ( psolver == 'poisfft_hybrid' .OR. psolver == 'multigrid' ) .AND. &
173	( nxra > nxr .OR. nyna > nyn .OR. nza > nz ) ) THEN
174	IF ( myid == 0 ) THEN
175	PRINT*, '+++ check_parameters:'
176	PRINT*, ' psolver="', TRIM( psolver ), '" does not work for ', &
177	'subdomains with unequal size'
178	PRINT*, ' please set grid_matching = ''strict'' in the parameter',&
179	' file'
180	ENDIF
181	CALL local_stop
182	ENDIF
183	#else
184	IF ( psolver == 'poisfft_hybrid' ) THEN
185	IF ( myid == 0 ) THEN
186	PRINT*, '+++ check_parameters:'
187	PRINT*, ' psolver="', TRIM( psolver ), '" only works for a ', &
188	'parallel environment'
189	ENDIF
190	CALL local_stop
191	ENDIF
192	#endif
193
194	IF ( psolver == 'multigrid' ) THEN
195	IF ( cycle_mg == 'w' ) THEN
196	gamma_mg = 2
197	ELSEIF ( cycle_mg == 'v' ) THEN
198	gamma_mg = 1
199	ELSE
200	IF ( myid == 0 ) THEN
201	PRINT*, '+++ check_parameters:'
202	PRINT*, ' unknown multigrid cycle: cycle_mg=', cycle_mg
203	ENDIF
204	CALL local_stop
205	ENDIF
206	ENDIF
207
208	IF ( fft_method /= 'singleton-algorithm' .AND. &
209	fft_method /= 'temperton-algorithm' .AND. &
210	fft_method /= 'system-specific' ) THEN
211	IF ( myid == 0 ) THEN
212	PRINT*, '+++ check_parameters:'
213	PRINT*, ' unknown fft-algorithm: fft_method=', fft_method
214	ENDIF
215	CALL local_stop
216	ENDIF
217
218	!
219	!-- Advection schemes:
220	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ups-scheme' ) &
221	THEN
222	IF ( myid == 0 ) PRINT*, '+++ check_parameters: unknown advection ', &
223	'scheme: momentum_advec=', momentum_advec
224	CALL local_stop
225	ENDIF
226	IF ( ( momentum_advec == 'ups-scheme' .OR. scalar_advec == 'ups-scheme' )&
227	.AND. timestep_scheme /= 'euler' ) THEN
228	IF ( myid == 0 ) PRINT*, '+++ check_parameters: momentum_advec=', &
229	momentum_advec, ' is not allowed with ', &
230	'timestep_scheme=', timestep_scheme
231	CALL local_stop
232	ENDIF
233
234	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'bc-scheme' .AND.&
235	scalar_advec /= 'ups-scheme' ) THEN
236	IF ( myid == 0 ) PRINT*, '+++ check_parameters: unknown advection ', &
237	'scheme: scalar_advec=', scalar_advec
238	CALL local_stop
239	ENDIF
240
241	IF ( use_sgs_for_particles .AND. .NOT. use_upstream_for_tke ) THEN
242	use_upstream_for_tke = .TRUE.
243	IF ( myid == 0 ) THEN
244	PRINT*, '+++ WARNING: check_parameters: use_upstream_for_tke set ', &
245	'.TRUE. because use_sgs_for_particles = .TRUE.'
246	ENDIF
247	ENDIF
248
249	IF ( use_upstream_for_tke .AND. timestep_scheme(1:8) == 'leapfrog' ) THEN
250	IF ( myid == 0 ) THEN
251	PRINT*, '+++ check_parameters: use_upstream_for_tke = .TRUE. ', &
252	'not allowed with timestep_scheme=', timestep_scheme
253	ENDIF
254	CALL local_stop
255	ENDIF
256
257	!
258	!-- Timestep schemes:
259	SELECT CASE ( TRIM( timestep_scheme ) )
260
261	CASE ( 'euler' )
262	intermediate_timestep_count_max = 1
263	asselin_filter_factor = 0.0
264
265	CASE ( 'leapfrog', 'leapfrog+euler' )
266	intermediate_timestep_count_max = 1
267
268	CASE ( 'runge-kutta-2' )
269	intermediate_timestep_count_max = 2
270	asselin_filter_factor = 0.0
271
272	CASE ( 'runge-kutta-3' )
273	intermediate_timestep_count_max = 3
274	asselin_filter_factor = 0.0
275
276	CASE DEFAULT
277	IF ( myid == 0 ) PRINT*, '+++ check_parameters: unknown timestep ',&
278	'scheme: timestep_scheme=', timestep_scheme
279	CALL local_stop
280
281	END SELECT
282
283	IF ( scalar_advec == 'ups-scheme' .AND. timestep_scheme(1:5) == 'runge' )&
284	THEN
285	IF ( myid == 0 ) THEN
286	PRINT*, '+++ check_parameters: scalar advection scheme "', &
287	TRIM( scalar_advec ), '"'
288	PRINT*, ' does not work with timestep_scheme "', &
289	TRIM( timestep_scheme ), '"'
290	ENDIF
291	CALL local_stop
292	ENDIF
293
294	IF ( momentum_advec /= 'pw-scheme' .AND. timestep_scheme(1:5) == 'runge' ) &
295	THEN
296	IF ( myid == 0 ) THEN
297	PRINT*, '+++ check_parameters: momentum advection scheme "', &
298	TRIM( momentum_advec ), '"'
299	PRINT*, ' does not work with timestep_scheme "', &
300	TRIM( timestep_scheme ), '"'
301	ENDIF
302	CALL local_stop
303	ENDIF
304
305
306	IF ( initializing_actions == ' ' ) THEN
307	IF ( myid == 0 ) THEN
308	PRINT*, '+++ check parameters:'
309	PRINT*, ' no value found for initializing_actions'
310	ENDIF
311	CALL local_stop
312	ENDIF
313
314	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
315	!
316	!-- No model continuation run; several initialising actions are possible
317	action = initializing_actions
318	DO WHILE ( TRIM( action ) /= '' )
319	position = INDEX( action, ' ' )
320	SELECT CASE ( action(1:position-1) )
321
322	CASE ( 'set_constant_profiles', 'set_1d-model_profiles', &
323	'by_user', 'initialize_vortex', 'initialize_ptanom' )
324	action = action(position+1:)
325
326	CASE DEFAULT
327	IF ( myid == 0 ) PRINT*, '+++ check_parameters: initializi', &
328	'ng_action unkown or not allowed: action = "', &
329	TRIM(action), '"'
330	CALL local_stop
331
332	END SELECT
333	ENDDO
334	ENDIF
335	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
336	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
337	IF ( myid == 0 ) PRINT*, '+++ check_parameters: initializing_actions', &
338	'"set_constant_profiles" and "set_1d-model_profiles" are not', &
339	' allowed simultaneously'
340	CALL local_stop
341	ENDIF
342	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
343	INDEX( initializing_actions, 'by_user' ) /= 0 ) THEN
344	IF ( myid == 0 ) PRINT*, '+++ check_parameters: initializing_actions', &
345	'"set_constant_profiles" and "by_user" are not', &
346	' allowed simultaneously'
347	CALL local_stop
348	ENDIF
349	IF ( INDEX( initializing_actions, 'by_user' ) /= 0 .AND. &
350	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
351	IF ( myid == 0 ) PRINT*, '+++ check_parameters: initializing_actions', &
352	'"by_user" and "set_1d-model_profiles" are not', &
353	' allowed simultaneously'
354	CALL local_stop
355	ENDIF
356
357	IF ( cloud_physics .AND. .NOT. humidity ) THEN
358	IF ( myid == 0 ) PRINT*, '+++ check_parameters: cloud_physics =', &
359	cloud_physics, ' is not allowed with ', &
360	'humidity =', humidity
361	CALL local_stop
362	ENDIF
363
364	IF ( precipitation .AND. .NOT. cloud_physics ) THEN
365	IF ( myid == 0 ) PRINT*, '+++ check_parameters: precipitation =', &
366	precipitation, ' is not allowed with ', &
367	'cloud_physics =', cloud_physics
368	CALL local_stop
369	ENDIF
370
371	IF ( humidity .AND. sloping_surface ) THEN
372	IF ( myid == 0 ) PRINT*, '+++ check_parameters: humidity = TRUE', &
373	'and hang = TRUE are not', &
374	' allowed simultaneously'
375	CALL local_stop
376	ENDIF
377
378	IF ( humidity .AND. scalar_advec == 'ups-scheme' ) THEN
379	IF ( myid == 0 ) PRINT*, '+++ check_parameters: UPS-scheme', &
380	'is not implemented for humidity'
381	CALL local_stop
382	ENDIF
383
384	IF ( passive_scalar .AND. humidity ) THEN
385	IF ( myid == 0 ) PRINT*, '+++ check_parameters: humidity = TRUE and', &
386	'passive_scalar = TRUE is not allowed ', &
387	'simultaneously'
388	CALL local_stop
389	ENDIF
390
391	IF ( passive_scalar .AND. scalar_advec == 'ups-scheme' ) THEN
392	IF ( myid == 0 ) PRINT*, '+++ check_parameters: UPS-scheme', &
393	'is not implemented for passive_scalar'
394	CALL local_stop
395	ENDIF
396
397	IF ( grid_matching /= 'strict' .AND. grid_matching /= 'match' ) THEN
398	IF ( myid == 0 ) PRINT*, '+++ check_parameters: illegal value "', &
399	TRIM( grid_matching ), &
400	'" found for parameter grid_matching'
401	CALL local_stop
402	ENDIF
403
404	!
405	!-- In case of no model continuation run, check initialising parameters and
406	!-- deduce further quantities
407	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
408
409	!
410	!-- Initial profiles for 1D and 3D model, respectively
411	u_init = ug_surface
412	v_init = vg_surface
413	pt_init = pt_surface
414	IF ( humidity ) q_init = q_surface
415	IF ( passive_scalar ) q_init = s_surface
416
417	!
418	!--
419	!-- If required, compute initial profile of the geostrophic wind
420	!-- (component ug)
421	i = 1
422	gradient = 0.0
423	ug_vertical_gradient_level_ind(1) = 0
424	ug(0) = ug_surface
425	DO k = 1, nzt+1
426	IF ( ug_vertical_gradient_level(i) < zu(k) .AND. &
427	ug_vertical_gradient_level(i) >= 0.0 ) THEN
428	gradient = ug_vertical_gradient(i) / 100.0
429	ug_vertical_gradient_level_ind(i) = k - 1
430	i = i + 1
431	IF ( i > 10 ) THEN
432	IF ( myid == 0 ) THEN
433	PRINT*, '+++ check_parameters: upper bound 10 of array', &
434	' "ug_vertical_gradient_level_ind" exceeded'
435	ENDIF
436	CALL local_stop
437	ENDIF
438	ENDIF
439	IF ( gradient /= 0.0 ) THEN
440	IF ( k /= 1 ) THEN
441	ug(k) = ug(k-1) + dzu(k) * gradient
442	ELSE
443	ug(k) = ug_surface + 0.5 * dzu(k) * gradient
444	ENDIF
445	ELSE
446	ug(k) = ug(k-1)
447	ENDIF
448	ENDDO
449
450	u_init = ug
451
452	!
453	!-- In case of no given gradients for ug, choose a vanishing gradient
454	IF ( ug_vertical_gradient_level(1) == -1.0 ) THEN
455	ug_vertical_gradient_level(1) = 0.0
456	ENDIF
457
458	!
459	!--
460	!-- If required, compute initial profile of the geostrophic wind
461	!-- (component vg)
462	i = 1
463	gradient = 0.0
464	vg_vertical_gradient_level_ind(1) = 0
465	vg(0) = vg_surface
466	DO k = 1, nzt+1
467	IF ( vg_vertical_gradient_level(i) < zu(k) .AND. &
468	vg_vertical_gradient_level(i) >= 0.0 ) THEN
469	gradient = vg_vertical_gradient(i) / 100.0
470	vg_vertical_gradient_level_ind(i) = k - 1
471	i = i + 1
472	IF ( i > 10 ) THEN
473	IF ( myid == 0 ) THEN
474	PRINT*, '+++ check_parameters: upper bound 10 of array', &
475	' "vg_vertical_gradient_level_ind" exceeded'
476	ENDIF
477	CALL local_stop
478	ENDIF
479	ENDIF
480	IF ( gradient /= 0.0 ) THEN
481	IF ( k /= 1 ) THEN
482	vg(k) = vg(k-1) + dzu(k) * gradient
483	ELSE
484	vg(k) = vg_surface + 0.5 * dzu(k) * gradient
485	ENDIF
486	ELSE
487	vg(k) = vg(k-1)
488	ENDIF
489	ENDDO
490
491	v_init = vg
492
493	!
494	!-- In case of no given gradients for vg, choose a vanishing gradient
495	IF ( vg_vertical_gradient_level(1) == -1.0 ) THEN
496	vg_vertical_gradient_level(1) = 0.0
497	ENDIF
498
499	!
500	!-- If required, compute initial temperature profile using the given
501	!-- temperature gradient
502	i = 1
503	gradient = 0.0
504	pt_vertical_gradient_level_ind(1) = 0
505	DO k = 1, nzt+1
506	IF ( pt_vertical_gradient_level(i) < zu(k) .AND. &
507	pt_vertical_gradient_level(i) >= 0.0 ) THEN
508	gradient = pt_vertical_gradient(i) / 100.0
509	pt_vertical_gradient_level_ind(i) = k - 1
510	i = i + 1
511	IF ( i > 10 ) THEN
512	IF ( myid == 0 ) THEN
513	PRINT*, '+++ check_parameters: upper bound 10 of array', &
514	' "pt_vertical_gradient_level_ind" exceeded'
515	ENDIF
516	CALL local_stop
517	ENDIF
518	ENDIF
519	IF ( gradient /= 0.0 ) THEN
520	IF ( k /= 1 ) THEN
521	pt_init(k) = pt_init(k-1) + dzu(k) * gradient
522	ELSE
523	pt_init(k) = pt_init(k-1) + 0.5 * dzu(k) * gradient
524	ENDIF
525	ELSE
526	pt_init(k) = pt_init(k-1)
527	ENDIF
528	ENDDO
529
530	!
531	!-- In case of no given temperature gradients, choose gradient of neutral
532	!-- stratification
533	IF ( pt_vertical_gradient_level(1) == -1.0 ) THEN
534	pt_vertical_gradient_level(1) = 0.0
535	ENDIF
536
537	!
538	!-- Store temperature gradient at the top boundary for possile Neumann
539	!-- boundary condition
540	bc_pt_t_val = ( pt_init(nzt+1) - pt_init(nzt) ) / dzu(nzt+1)
541
542	!
543	!-- If required, compute initial humidity or scalar profile using the given
544	!-- humidity/scalar gradient. In case of scalar transport, initially store
545	!-- values of the scalar parameters on humidity parameters
546	IF ( passive_scalar ) THEN
547	bc_q_b = bc_s_b
548	bc_q_t = bc_s_t
549	q_surface = s_surface
550	q_surface_initial_change = s_surface_initial_change
551	q_vertical_gradient = s_vertical_gradient
552	q_vertical_gradient_level = s_vertical_gradient_level
553	surface_waterflux = surface_scalarflux
554	ENDIF
555
556	IF ( humidity .OR. passive_scalar ) THEN
557
558	i = 1
559	gradient = 0.0
560	q_vertical_gradient_level_ind(1) = 0
561	DO k = 1, nzt+1
562	IF ( q_vertical_gradient_level(i) < zu(k) .AND. &
563	q_vertical_gradient_level(i) >= 0.0 ) THEN
564	gradient = q_vertical_gradient(i) / 100.0
565	q_vertical_gradient_level_ind(i) = k - 1
566	i = i + 1
567	IF ( i > 10 ) THEN
568	IF ( myid == 0 ) THEN
569	PRINT*, '+++ check_parameters: upper bound 10 of arr', &
570	'ay "q_vertical_gradient_level_ind" exceeded'
571	ENDIF
572	CALL local_stop
573	ENDIF
574	ENDIF
575	IF ( gradient /= 0.0 ) THEN
576	IF ( k /= 1 ) THEN
577	q_init(k) = q_init(k-1) + dzu(k) * gradient
578	ELSE
579	q_init(k) = q_init(k-1) + 0.5 * dzu(k) * gradient
580	ENDIF
581	ELSE
582	q_init(k) = q_init(k-1)
583	ENDIF
584	!
585	!-- Avoid negative humidities
586	IF ( q_init(k) < 0.0 ) THEN
587	q_init(k) = 0.0
588	ENDIF
589	ENDDO
590
591	!
592	!-- In case of no given humidity gradients, choose zero gradient
593	!-- conditions
594	IF ( q_vertical_gradient_level(1) == -1.0 ) THEN
595	q_vertical_gradient_level(1) = 0.0
596	ENDIF
597
598	!
599	!-- Store humidity gradient at the top boundary for possile Neumann
600	!-- boundary condition
601	bc_q_t_val = ( q_init(nzt+1) - q_init(nzt) ) / dzu(nzt+1)
602
603	ENDIF
604
605	ENDIF
606
607	!
608	!-- Compute Coriolis parameter
609	f = 2.0 * omega * SIN( phi / 180.0 * pi )
610	fs = 2.0 * omega * COS( phi / 180.0 * pi )
611
612	!
613	!-- Reference temperature to be used in buoyancy terms
614	IF ( pt_reference /= 9999999.9 ) use_pt_reference = .TRUE.
615
616	!
617	!-- In case of a given slope, compute the relevant quantities
618	IF ( alpha_surface /= 0.0 ) THEN
619	IF ( ABS( alpha_surface ) > 90.0 ) THEN
620	IF ( myid == 0 ) PRINT*, '+++ check_parameters: ABS( alpha_surface',&
621	'=', alpha_surface, ' ) must be < 90.0'
622	CALL local_stop
623	ENDIF
624	sloping_surface = .TRUE.
625	cos_alpha_surface = COS( alpha_surface / 180.0 * pi )
626	sin_alpha_surface = SIN( alpha_surface / 180.0 * pi )
627	ENDIF
628
629	!
630	!-- Check time step and cfl_factor
631	IF ( dt /= -1.0 ) THEN
632	IF ( dt <= 0.0 .AND. dt /= -1.0 ) THEN
633	IF ( myid == 0 ) PRINT*, '+++ check_parameters: dt=', dt, ' <= 0.0'
634	CALL local_stop
635	ENDIF
636	dt_3d = dt
637	dt_fixed = .TRUE.
638	ENDIF
639
640	IF ( cfl_factor <= 0.0 .OR. cfl_factor > 1.0 ) THEN
641	IF ( cfl_factor == -1.0 ) THEN
642	IF ( momentum_advec == 'ups-scheme' .OR. &
643	scalar_advec == 'ups-scheme' ) THEN
644	cfl_factor = 0.8
645	ELSE
646	IF ( timestep_scheme == 'runge-kutta-2' ) THEN
647	cfl_factor = 0.8
648	ELSEIF ( timestep_scheme == 'runge-kutta-3' ) THEN
649	cfl_factor = 0.9
650	ELSE
651	cfl_factor = 0.1
652	ENDIF
653	ENDIF
654	ELSE
655	IF ( myid == 0 ) THEN
656	PRINT*, '+++ check_parameters: cfl_factor=', cfl_factor, &
657	' out of range'
658	PRINT*, '+++ 0.0 < cfl_factor <= 1.0 is required'
659	ENDIF
660	CALL local_stop
661	ENDIF
662	ENDIF
663
664	!
665	!-- Store simulated time at begin
666	simulated_time_at_begin = simulated_time
667
668	!
669	!-- Set wind speed in the Galilei-transformed system
670	IF ( galilei_transformation ) THEN
671	IF ( use_ug_for_galilei_tr .AND. &
672	ug_vertical_gradient_level(1) == 0.0 .AND. &
673	vg_vertical_gradient_level(1) == 0.0 ) THEN
674	u_gtrans = ug_surface
675	v_gtrans = vg_surface
676	ELSEIF ( use_ug_for_galilei_tr .AND. &
677	ug_vertical_gradient_level(1) /= 0.0 ) THEN
678	IF ( myid == 0 ) THEN
679	PRINT*, '+++ check_parameters:'
680	PRINT*, ' baroclinicity (ug) not allowed'
681	PRINT*, ' simultaneously with galilei transformation'
682	ENDIF
683	CALL local_stop
684	ELSEIF ( use_ug_for_galilei_tr .AND. &
685	vg_vertical_gradient_level(1) /= 0.0 ) THEN
686	IF ( myid == 0 ) THEN
687	PRINT*, '+++ check_parameters:'
688	PRINT*, ' baroclinicity (vg) not allowed'
689	PRINT*, ' simultaneously with galilei transformation'
690	ENDIF
691	CALL local_stop
692	ELSE
693	IF ( myid == 0 ) THEN
694	PRINT*, '+++ WARNING: check_parameters:'
695	PRINT*, ' variable translation speed used for galilei-tran' // &
696	'sformation, which'
697	PRINT*, ' may cause instabilities in stably stratified regions'
698	ENDIF
699	ENDIF
700	ENDIF
701
702	!
703	!-- In case of using a prandtl-layer, calculated (or prescribed) surface
704	!-- fluxes have to be used in the diffusion-terms
705	IF ( prandtl_layer ) use_surface_fluxes = .TRUE.
706
707	!
708	!-- Check boundary conditions and set internal variables:
709	!-- Lateral boundary conditions
710	IF ( bc_lr /= 'cyclic' .AND. bc_lr /= 'dirichlet/radiation' .AND. &
711	bc_lr /= 'radiation/dirichlet' ) THEN
712	IF ( myid == 0 ) THEN
713	PRINT*, '+++ check_parameters:'
714	PRINT*, ' unknown boundary condition: bc_lr = ', bc_lr
715	ENDIF
716	CALL local_stop
717	ENDIF
718	IF ( bc_ns /= 'cyclic' .AND. bc_ns /= 'dirichlet/radiation' .AND. &
719	bc_ns /= 'radiation/dirichlet' ) THEN
720	IF ( myid == 0 ) THEN
721	PRINT*, '+++ check_parameters:'
722	PRINT*, ' unknown boundary condition: bc_ns = ', bc_ns
723	ENDIF
724	CALL local_stop
725	ENDIF
726
727	!
728	!-- Non-cyclic lateral boundaries require the multigrid method and Piascek-
729	!-- Willimas advection scheme. Several schemes and tools do not work with
730	!-- non-cyclic boundary conditions.
731	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
732	IF ( psolver /= 'multigrid' ) THEN
733	IF ( myid == 0 ) THEN
734	PRINT*, '+++ check_parameters:'
735	PRINT*, ' non-cyclic lateral boundaries do not allow', &
736	' psolver = ', psolver
737	ENDIF
738	CALL local_stop
739	ENDIF
740	IF ( momentum_advec /= 'pw-scheme' ) THEN
741	IF ( myid == 0 ) THEN
742	PRINT*, '+++ check_parameters:'
743	PRINT*, ' non-cyclic lateral boundaries do not allow', &
744	' momentum_advec = ', momentum_advec
745	ENDIF
746	CALL local_stop
747	ENDIF
748	IF ( scalar_advec /= 'pw-scheme' ) THEN
749	IF ( myid == 0 ) THEN
750	PRINT*, '+++ check_parameters:'
751	PRINT*, ' non-cyclic lateral boundaries do not allow', &
752	' scalar_advec = ', scalar_advec
753	ENDIF
754	CALL local_stop
755	ENDIF
756	IF ( galilei_transformation ) THEN
757	IF ( myid == 0 ) THEN
758	PRINT*, '+++ check_parameters:'
759	PRINT*, ' non-cyclic lateral boundaries do not allow', &
760	' galilei_transformation = .T.'
761	ENDIF
762	CALL local_stop
763	ENDIF
764	! IF ( conserve_volume_flow ) THEN
765	! IF ( myid == 0 ) THEN
766	! PRINT*, '+++ check_parameters:'
767	! PRINT*, ' non-cyclic lateral boundaries do not allow', &
768	! ' conserve_volume_flow = .T.'
769	! ENDIF
770	! CALL local_stop
771	! ENDIF
772	ENDIF
773
774	!
775	!-- Bottom boundary condition for the turbulent Kinetic energy
776	IF ( bc_e_b == 'neumann' ) THEN
777	ibc_e_b = 1
778	IF ( adjust_mixing_length .AND. prandtl_layer ) THEN
779	IF ( myid == 0 ) THEN
780	PRINT*, '+++ WARNING: check_parameters:'
781	PRINT*, ' adjust_mixing_length = TRUE and bc_e_b = ', bc_e_b
782	ENDIF
783	ENDIF
784	ELSEIF ( bc_e_b == '(u)*2+neumann' ) THEN
785	ibc_e_b = 2
786	IF ( .NOT. adjust_mixing_length .AND. prandtl_layer ) THEN
787	IF ( myid == 0 ) THEN
788	PRINT*, '+++ WARNING: check_parameters:'
789	PRINT*, ' adjust_mixing_length = FALSE and bc_e_b = ', bc_e_b
790	ENDIF
791	ENDIF
792	IF ( .NOT. prandtl_layer ) THEN
793	bc_e_b = 'neumann'
794	ibc_e_b = 1
795	IF ( myid == 0 ) THEN
796	PRINT*, '+++ WARNING: check_parameters:'
797	PRINT*, ' boundary condition bc_e_b changed to "', bc_e_b, '"'
798	ENDIF
799	ENDIF
800	ELSE
801	IF ( myid == 0 ) THEN
802	PRINT*, '+++ check_parameters:'
803	PRINT*, ' unknown boundary condition: bc_e_b = ', bc_e_b
804	ENDIF
805	CALL local_stop
806	ENDIF
807
808	!
809	!-- Boundary conditions for perturbation pressure
810	IF ( bc_p_b == 'dirichlet' ) THEN
811	ibc_p_b = 0
812	ELSEIF ( bc_p_b == 'neumann' ) THEN
813	ibc_p_b = 1
814	ELSEIF ( bc_p_b == 'neumann+inhomo' ) THEN
815	ibc_p_b = 2
816	ELSE
817	IF ( myid == 0 ) THEN
818	PRINT*, '+++ check_parameters:'
819	PRINT*, ' unknown boundary condition: bc_p_b = ', bc_p_b
820	ENDIF
821	CALL local_stop
822	ENDIF
823	IF ( ibc_p_b == 2 .AND. .NOT. prandtl_layer ) THEN
824	IF ( myid == 0 ) THEN
825	PRINT*, '+++ check_parameters:'
826	PRINT*, ' boundary condition: bc_p_b = ', TRIM( bc_p_b ), &
827	' not allowed with'
828	PRINT*, ' prandtl_layer = .FALSE.'
829	ENDIF
830	CALL local_stop
831	ENDIF
832	IF ( bc_p_t == 'dirichlet' ) THEN
833	ibc_p_t = 0
834	ELSEIF ( bc_p_t == 'neumann' ) THEN
835	ibc_p_t = 1
836	ELSE
837	IF ( myid == 0 ) THEN
838	PRINT*, '+++ check_parameters:'
839	PRINT*, ' unknown boundary condition: bc_p_t = ', bc_p_t
840	ENDIF
841	CALL local_stop
842	ENDIF
843
844	!
845	!-- Boundary conditions for potential temperature
846	IF ( bc_pt_b == 'dirichlet' ) THEN
847	ibc_pt_b = 0
848	ELSEIF ( bc_pt_b == 'neumann' ) THEN
849	ibc_pt_b = 1
850	ELSE
851	IF ( myid == 0 ) THEN
852	PRINT*, '+++ check_parameters:'
853	PRINT*, ' unknown boundary condition: bc_pt_b = ', bc_pt_b
854	ENDIF
855	CALL local_stop
856	ENDIF
857	IF ( bc_pt_t == 'dirichlet' ) THEN
858	ibc_pt_t = 0
859	ELSEIF ( bc_pt_t == 'neumann' ) THEN
860	ibc_pt_t = 1
861	ELSEIF ( bc_pt_t == 'initial_gradient' ) THEN
862	ibc_pt_t = 2
863	ELSE
864	IF ( myid == 0 ) THEN
865	PRINT*, '+++ check_parameters:'
866	PRINT*, ' unknown boundary condition: bc_pt_t = ', bc_pt_t
867	ENDIF
868	CALL local_stop
869	ENDIF
870
871	IF ( surface_heatflux == 9999999.9 ) constant_heatflux = .FALSE.
872	IF ( top_heatflux == 9999999.9 ) constant_top_heatflux = .FALSE.
873
874	!
875	!-- A given surface temperature implies Dirichlet boundary condition for
876	!-- temperature. In this case specification of a constant heat flux is
877	!-- forbidden.
878	IF ( ibc_pt_b == 0 .AND. constant_heatflux .AND. &
879	surface_heatflux /= 0.0 ) THEN
880	IF ( myid == 0 ) THEN
881	PRINT*, '+++ check_parameters:'
882	PRINT*, ' boundary_condition: bc_pt_b = ', bc_pt_b
883	PRINT*, ' is not allowed with constant_heatflux = .TRUE.'
884	ENDIF
885	CALL local_stop
886	ENDIF
887	IF ( constant_heatflux .AND. pt_surface_initial_change /= 0.0 ) THEN
888	IF ( myid == 0 ) THEN
889	PRINT*, '+++ check_parameters: constant_heatflux = .TRUE. is not'
890	PRINT*, ' allowed with pt_surface_initial_change (/=0) = ', &
891	pt_surface_initial_change
892	ENDIF
893	CALL local_stop
894	ENDIF
895
896	!
897	!-- A given temperature at the top implies Dirichlet boundary condition for
898	!-- temperature. In this case specification of a constant heat flux is
899	!-- forbidden.
900	IF ( ibc_pt_t == 0 .AND. constant_top_heatflux .AND. &
901	top_heatflux /= 0.0 ) THEN
902	IF ( myid == 0 ) THEN
903	PRINT*, '+++ check_parameters:'
904	PRINT*, ' boundary_condition: bc_pt_t = ', bc_pt_t
905	PRINT*, ' is not allowed with constant_top_heatflux = .TRUE.'
906	ENDIF
907	CALL local_stop
908	ENDIF
909
910	!
911	!-- In case of humidity or passive scalar, set boundary conditions for total
912	!-- water content / scalar
913	IF ( humidity .OR. passive_scalar ) THEN
914	IF ( humidity ) THEN
915	sq = 'q'
916	ELSE
917	sq = 's'
918	ENDIF
919	IF ( bc_q_b == 'dirichlet' ) THEN
920	ibc_q_b = 0
921	ELSEIF ( bc_q_b == 'neumann' ) THEN
922	ibc_q_b = 1
923	ELSE
924	IF ( myid == 0 ) THEN
925	PRINT*, '+++ check_parameters:'
926	PRINT*, ' unknown boundary condition: bc_', sq, '_b = ', bc_q_b
927	ENDIF
928	CALL local_stop
929	ENDIF
930	IF ( bc_q_t == 'dirichlet' ) THEN
931	ibc_q_t = 0
932	ELSEIF ( bc_q_t == 'neumann' ) THEN
933	ibc_q_t = 1
934	ELSE
935	IF ( myid == 0 ) THEN
936	PRINT*, '+++ check_parameters:'
937	PRINT*, ' unknown boundary condition: bc_', sq, '_t = ', bc_q_t
938	ENDIF
939	CALL local_stop
940	ENDIF
941
942	IF ( surface_waterflux == 0.0 ) constant_waterflux = .FALSE.
943
944	!
945	!-- A given surface humidity implies Dirichlet boundary condition for
946	!-- humidity. In this case specification of a constant water flux is
947	!-- forbidden.
948	IF ( ibc_q_b == 0 .AND. constant_waterflux ) THEN
949	IF ( myid == 0 ) THEN
950	PRINT*, '+++ check_parameters:'
951	PRINT*, ' boundary_condition: bc_', sq, '_b = ', bc_q_b
952	PRINT*, ' is not allowed with prescribed surface flux'
953	ENDIF
954	CALL local_stop
955	ENDIF
956	IF ( constant_waterflux .AND. q_surface_initial_change /= 0.0 ) THEN
957	IF ( myid == 0 ) THEN
958	PRINT*, '+++ check_parameters: a prescribed surface flux is not'
959	PRINT*, ' allowed with ', sq, '_surface_initial_change (/=0)', &
960	' = ', q_surface_initial_change
961	ENDIF
962	CALL local_stop
963	ENDIF
964
965	ENDIF
966
967	!
968	!-- Boundary conditions for horizontal components of wind speed
969	IF ( bc_uv_b == 'dirichlet' ) THEN
970	ibc_uv_b = 0
971	ELSEIF ( bc_uv_b == 'neumann' ) THEN
972	ibc_uv_b = 1
973	IF ( prandtl_layer ) THEN
974	IF ( myid == 0 ) THEN
975	PRINT*, '+++ check_parameters:'
976	PRINT*, ' boundary condition: bc_uv_b = ', TRIM( bc_uv_b ), &
977	' is not allowed with'
978	PRINT*, ' prandtl_layer = .TRUE.'
979	ENDIF
980	CALL local_stop
981	ENDIF
982	ELSE
983	IF ( myid == 0 ) THEN
984	PRINT*, '+++ check_parameters:'
985	PRINT*, ' unknown boundary condition: bc_uv_b = ', bc_uv_b
986	ENDIF
987	CALL local_stop
988	ENDIF
989	IF ( bc_uv_t == 'dirichlet' ) THEN
990	ibc_uv_t = 0
991	ELSEIF ( bc_uv_t == 'neumann' ) THEN
992	ibc_uv_t = 1
993	ELSE
994	IF ( myid == 0 ) THEN
995	PRINT*, '+++ check_parameters:'
996	PRINT*, ' unknown boundary condition: bc_uv_t = ', bc_uv_t
997	ENDIF
998	CALL local_stop
999	ENDIF
1000
1001	!
1002	!-- Compute and check, respectively, the Rayleigh Damping parameter
1003	IF ( rayleigh_damping_factor == -1.0 ) THEN
1004	IF ( momentum_advec == 'ups-scheme' ) THEN
1005	rayleigh_damping_factor = 0.01
1006	ELSE
1007	rayleigh_damping_factor = 0.0
1008	ENDIF
1009	ELSE
1010	IF ( rayleigh_damping_factor < 0.0 .OR. rayleigh_damping_factor > 1.0 ) &
1011	THEN
1012	IF ( myid == 0 ) THEN
1013	PRINT*, '+++ check_parameters:'
1014	PRINT*, ' rayleigh_damping_factor = ', rayleigh_damping_factor,&
1015	' out of range [0.0,1.0]'
1016	ENDIF
1017	CALL local_stop
1018	ENDIF
1019	ENDIF
1020
1021	IF ( rayleigh_damping_height == -1.0 ) THEN
1022	rayleigh_damping_height = 0.66666666666 * zu(nzt)
1023	ELSE
1024	IF ( rayleigh_damping_height < 0.0 .OR. &
1025	rayleigh_damping_height > zu(nzt) ) THEN
1026	IF ( myid == 0 ) THEN
1027	PRINT*, '+++ check_parameters:'
1028	PRINT*, ' rayleigh_damping_height = ', rayleigh_damping_height,&
1029	' out of range [0.0,', zu(nzt), ']'
1030	ENDIF
1031	CALL local_stop
1032	ENDIF
1033	ENDIF
1034
1035	!
1036	!-- Check limiters for Upstream-Spline scheme
1037	IF ( overshoot_limit_u < 0.0 .OR. overshoot_limit_v < 0.0 .OR. &
1038	overshoot_limit_w < 0.0 .OR. overshoot_limit_pt < 0.0 .OR. &
1039	overshoot_limit_e < 0.0 ) THEN
1040	IF ( myid == 0 ) THEN
1041	PRINT*, '+++ check_parameters:'
1042	PRINT*, ' overshoot_limit_... < 0.0 is not allowed'
1043	ENDIF
1044	CALL local_stop
1045	ENDIF
1046	IF ( ups_limit_u < 0.0 .OR. ups_limit_v < 0.0 .OR. ups_limit_w < 0.0 .OR. &
1047	ups_limit_pt < 0.0 .OR. ups_limit_e < 0.0 ) THEN
1048	IF ( myid == 0 ) THEN
1049	PRINT*, '+++ check_parameters:'
1050	PRINT*, ' ups_limit_... < 0.0 is not allowed'
1051	ENDIF
1052	CALL local_stop
1053	ENDIF
1054
1055	!
1056	!-- Check number of chosen statistic regions. More than 10 regions are not
1057	!-- allowed, because so far no more than 10 corresponding output files can
1058	!-- be opened (cf. check_open)
1059	IF ( statistic_regions > 9 .OR. statistic_regions < 0 ) THEN
1060	IF ( myid == 0 ) THEN
1061	PRINT*, '+++ check_parameters: Number of statistic_regions = ', &
1062	statistic_regions+1
1063	PRINT*, ' Only 10 regions are allowed'
1064	ENDIF
1065	CALL local_stop
1066	ENDIF
1067	IF ( normalizing_region > statistic_regions .OR. &
1068	normalizing_region < 0) THEN
1069	IF ( myid == 0 ) THEN
1070	PRINT*, '+++ check_parameters: normalizing_region = ', &
1071	normalizing_region, ' is unknown'
1072	PRINT*, ' Must be <= ', statistic_regions
1073	ENDIF
1074	CALL local_stop
1075	ENDIF
1076
1077	!
1078	!-- Set the default intervals for data output, if necessary
1079	!-- NOTE: dt_dosp has already been set in package_parin
1080	IF ( dt_data_output /= 9999999.9 ) THEN
1081	IF ( dt_dopr == 9999999.9 ) dt_dopr = dt_data_output
1082	IF ( dt_dopts == 9999999.9 ) dt_dopts = dt_data_output
1083	IF ( dt_do2d_xy == 9999999.9 ) dt_do2d_xy = dt_data_output
1084	IF ( dt_do2d_xz == 9999999.9 ) dt_do2d_xz = dt_data_output
1085	IF ( dt_do2d_yz == 9999999.9 ) dt_do2d_yz = dt_data_output
1086	IF ( dt_do3d == 9999999.9 ) dt_do3d = dt_data_output
1087	IF ( dt_data_output_av == 9999999.9 ) dt_data_output_av = dt_data_output
1088	ENDIF
1089
1090	!
1091	!-- Set the default skip time intervals for data output, if necessary
1092	IF ( skip_time_dopr == 9999999.9 ) &
1093	skip_time_dopr = skip_time_data_output
1094	IF ( skip_time_dosp == 9999999.9 ) &
1095	skip_time_dosp = skip_time_data_output
1096	IF ( skip_time_do2d_xy == 9999999.9 ) &
1097	skip_time_do2d_xy = skip_time_data_output
1098	IF ( skip_time_do2d_xz == 9999999.9 ) &
1099	skip_time_do2d_xz = skip_time_data_output
1100	IF ( skip_time_do2d_yz == 9999999.9 ) &
1101	skip_time_do2d_yz = skip_time_data_output
1102	IF ( skip_time_do3d == 9999999.9 ) &
1103	skip_time_do3d = skip_time_data_output
1104	IF ( skip_time_data_output_av == 9999999.9 ) &
1105	skip_time_data_output_av = skip_time_data_output
1106
1107	!
1108	!-- Check the average intervals (first for 3d-data, then for profiles and
1109	!-- spectra)
1110	IF ( averaging_interval > dt_data_output_av ) THEN
1111	IF ( myid == 0 ) THEN
1112	PRINT*, '+++ check_parameters: average_interval=', &
1113	averaging_interval, ' must be <= dt_data_output=', &
1114	dt_data_output
1115	ENDIF
1116	CALL local_stop
1117	ENDIF
1118
1119	IF ( averaging_interval_pr == 9999999.9 ) THEN
1120	averaging_interval_pr = averaging_interval
1121	ENDIF
1122
1123	IF ( averaging_interval_pr > dt_dopr ) THEN
1124	IF ( myid == 0 ) THEN
1125	PRINT*, '+++ check_parameters: averaging_interval_pr=', &
1126	averaging_interval_pr, ' must be <= dt_dopr=', dt_dopr
1127	ENDIF
1128	CALL local_stop
1129	ENDIF
1130
1131	IF ( averaging_interval_sp == 9999999.9 ) THEN
1132	averaging_interval_sp = averaging_interval
1133	ENDIF
1134
1135	IF ( averaging_interval_sp > dt_dosp ) THEN
1136	IF ( myid == 0 ) THEN
1137	PRINT*, '+++ check_parameters: averaging_interval_sp=', &
1138	averaging_interval_sp, ' must be <= dt_dosp=', dt_dosp
1139	ENDIF
1140	CALL local_stop
1141	ENDIF
1142
1143	!
1144	!-- Set the default interval for profiles entering the temporal average
1145	IF ( dt_averaging_input_pr == 9999999.9 ) THEN
1146	dt_averaging_input_pr = dt_averaging_input
1147	ENDIF
1148
1149	!
1150	!-- Set the default interval for the output of timeseries to a reasonable
1151	!-- value (tries to minimize the number of calls of flow_statistics)
1152	IF ( dt_dots == 9999999.9 ) THEN
1153	IF ( averaging_interval_pr == 0.0 ) THEN
1154	dt_dots = MIN( dt_run_control, dt_dopr )
1155	ELSE
1156	dt_dots = MIN( dt_run_control, dt_averaging_input_pr )
1157	ENDIF
1158	ENDIF
1159
1160	!
1161	!-- Check the sample rate for averaging (first for 3d-data, then for profiles)
1162	IF ( dt_averaging_input > averaging_interval ) THEN
1163	IF ( myid == 0 ) THEN
1164	PRINT*, '+++ check_parameters: dt_averaging_input=', &
1165	dt_averaging_input, ' must be <= averaging_interval=', &
1166	averaging_interval
1167	ENDIF
1168	CALL local_stop
1169	ENDIF
1170
1171	IF ( dt_averaging_input_pr > averaging_interval_pr ) THEN
1172	IF ( myid == 0 ) THEN
1173	PRINT*, '+++ check_parameters: dt_averaging_input_pr=', &
1174	dt_averaging_input_pr, &
1175	' must be <= averaging_interval_pr=', &
1176	averaging_interval_pr
1177	ENDIF
1178	CALL local_stop
1179	ENDIF
1180
1181	!
1182	!-- Set the default value for the integration interval of precipitation amount
1183	IF ( precipitation ) THEN
1184	IF ( precipitation_amount_interval == 9999999.9 ) THEN
1185	precipitation_amount_interval = dt_do2d_xy
1186	ELSE
1187	IF ( precipitation_amount_interval > dt_do2d_xy ) THEN
1188	IF ( myid == 0 ) PRINT*, '+++ check_parameters: ', &
1189	'precipitation_amount_interval =', &
1190	precipitation_amount_interval, &
1191	' must not be larger than dt_do2d_xy', &
1192	' = ', dt_do2d_xy
1193	CALL local_stop
1194	ENDIF
1195	ENDIF
1196	ENDIF
1197
1198	!
1199	!-- Determine the number of output profiles and check whether they are
1200	!-- permissible
1201	DO WHILE ( data_output_pr(dopr_n+1) /= ' ' )
1202
1203	dopr_n = dopr_n + 1
1204	i = dopr_n
1205
1206	!
1207	!-- Determine internal profile number (for hom, homs)
1208	!-- and store height levels
1209	SELECT CASE ( TRIM( data_output_pr(i) ) )
1210
1211	CASE ( 'u', '#u' )
1212	dopr_index(i) = 1
1213	hom(:,2,1,:) = SPREAD( zu, 2, statistic_regions+1 )
1214	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1215	dopr_initial_index(i) = 5
1216	hom(:,2,5,:) = SPREAD( zu, 2, statistic_regions+1 )
1217	data_output_pr(i) = data_output_pr(i)(2:)
1218	ENDIF
1219
1220	CASE ( 'v', '#v' )
1221	dopr_index(i) = 2
1222	hom(:,2,2,:) = SPREAD( zu, 2, statistic_regions+1 )
1223	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1224	dopr_initial_index(i) = 6
1225	hom(:,2,6,:) = SPREAD( zu, 2, statistic_regions+1 )
1226	data_output_pr(i) = data_output_pr(i)(2:)
1227	ENDIF
1228
1229	CASE ( 'w' )
1230	dopr_index(i) = 3
1231	hom(:,2,3,:) = SPREAD( zw, 2, statistic_regions+1 )
1232
1233	CASE ( 'pt', '#pt' )
1234	IF ( .NOT. cloud_physics ) THEN
1235	dopr_index(i) = 4
1236	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
1237	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1238	dopr_initial_index(i) = 7
1239	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
1240	hom(nzb,2,7,:) = 0.0 ! weil zu(nzb) negativ ist
1241	data_output_pr(i) = data_output_pr(i)(2:)
1242	ENDIF
1243	ELSE
1244	dopr_index(i) = 43
1245	hom(:,2,43,:) = SPREAD( zu, 2, statistic_regions+1 )
1246	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1247	dopr_initial_index(i) = 28
1248	hom(:,2,28,:) = SPREAD( zu, 2, statistic_regions+1 )
1249	hom(nzb,2,28,:) = 0.0 ! weil zu(nzb) negativ ist
1250	data_output_pr(i) = data_output_pr(i)(2:)
1251	ENDIF
1252	ENDIF
1253
1254	CASE ( 'e' )
1255	dopr_index(i) = 8
1256	hom(:,2,8,:) = SPREAD( zu, 2, statistic_regions+1 )
1257	hom(nzb,2,8,:) = 0.0
1258
1259	CASE ( 'km', '#km' )
1260	dopr_index(i) = 9
1261	hom(:,2,9,:) = SPREAD( zu, 2, statistic_regions+1 )
1262	hom(nzb,2,9,:) = 0.0
1263	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1264	dopr_initial_index(i) = 23
1265	hom(:,2,23,:) = hom(:,2,9,:)
1266	data_output_pr(i) = data_output_pr(i)(2:)
1267	ENDIF
1268
1269	CASE ( 'kh', '#kh' )
1270	dopr_index(i) = 10
1271	hom(:,2,10,:) = SPREAD( zu, 2, statistic_regions+1 )
1272	hom(nzb,2,10,:) = 0.0
1273	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1274	dopr_initial_index(i) = 24
1275	hom(:,2,24,:) = hom(:,2,10,:)
1276	data_output_pr(i) = data_output_pr(i)(2:)
1277	ENDIF
1278
1279	CASE ( 'l', '#l' )
1280	dopr_index(i) = 11
1281	hom(:,2,11,:) = SPREAD( zu, 2, statistic_regions+1 )
1282	hom(nzb,2,11,:) = 0.0
1283	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1284	dopr_initial_index(i) = 25
1285	hom(:,2,25,:) = hom(:,2,11,:)
1286	data_output_pr(i) = data_output_pr(i)(2:)
1287	ENDIF
1288
1289	CASE ( 'w"u"' )
1290	dopr_index(i) = 12
1291	hom(:,2,12,:) = SPREAD( zw, 2, statistic_regions+1 )
1292	IF ( prandtl_layer ) hom(nzb,2,12,:) = zu(1)
1293
1294	CASE ( 'wu' )
1295	dopr_index(i) = 13
1296	hom(:,2,13,:) = SPREAD( zw, 2, statistic_regions+1 )
1297
1298	CASE ( 'w"v"' )
1299	dopr_index(i) = 14
1300	hom(:,2,14,:) = SPREAD( zw, 2, statistic_regions+1 )
1301	IF ( prandtl_layer ) hom(nzb,2,14,:) = zu(1)
1302
1303	CASE ( 'wv' )
1304	dopr_index(i) = 15
1305	hom(:,2,15,:) = SPREAD( zw, 2, statistic_regions+1 )
1306
1307	CASE ( 'w"pt"' )
1308	dopr_index(i) = 16
1309	hom(:,2,16,:) = SPREAD( zw, 2, statistic_regions+1 )
1310
1311	CASE ( 'wpt' )
1312	dopr_index(i) = 17
1313	hom(:,2,17,:) = SPREAD( zw, 2, statistic_regions+1 )
1314
1315	CASE ( 'wpt' )
1316	dopr_index(i) = 18
1317	hom(:,2,18,:) = SPREAD( zw, 2, statistic_regions+1 )
1318
1319	CASE ( 'wu' )
1320	dopr_index(i) = 19
1321	hom(:,2,19,:) = SPREAD( zw, 2, statistic_regions+1 )
1322	IF ( prandtl_layer ) hom(nzb,2,19,:) = zu(1)
1323
1324	CASE ( 'wv' )
1325	dopr_index(i) = 20
1326	hom(:,2,20,:) = SPREAD( zw, 2, statistic_regions+1 )
1327	IF ( prandtl_layer ) hom(nzb,2,20,:) = zu(1)
1328
1329	CASE ( 'wptBC' )
1330	dopr_index(i) = 21
1331	hom(:,2,21,:) = SPREAD( zw, 2, statistic_regions+1 )
1332
1333	CASE ( 'wptBC' )
1334	dopr_index(i) = 22
1335	hom(:,2,22,:) = SPREAD( zw, 2, statistic_regions+1 )
1336
1337	CASE ( 'u*2' )
1338	dopr_index(i) = 30
1339	hom(:,2,30,:) = SPREAD( zu, 2, statistic_regions+1 )
1340
1341	CASE ( 'v*2' )
1342	dopr_index(i) = 31
1343	hom(:,2,31,:) = SPREAD( zu, 2, statistic_regions+1 )
1344
1345	CASE ( 'w*2' )
1346	dopr_index(i) = 32
1347	hom(:,2,32,:) = SPREAD( zw, 2, statistic_regions+1 )
1348
1349	CASE ( 'pt*2' )
1350	dopr_index(i) = 33
1351	hom(:,2,33,:) = SPREAD( zu, 2, statistic_regions+1 )
1352
1353	CASE ( 'e*' )
1354	dopr_index(i) = 34
1355	hom(:,2,34,:) = SPREAD( zu, 2, statistic_regions+1 )
1356
1357	CASE ( 'w2pt' )
1358	dopr_index(i) = 35
1359	hom(:,2,35,:) = SPREAD( zw, 2, statistic_regions+1 )
1360
1361	CASE ( 'wpt2' )
1362	dopr_index(i) = 36
1363	hom(:,2,36,:) = SPREAD( zw, 2, statistic_regions+1 )
1364
1365	CASE ( 'we' )
1366	dopr_index(i) = 37
1367	hom(:,2,37,:) = SPREAD( zw, 2, statistic_regions+1 )
1368
1369	CASE ( 'w*3' )
1370	dopr_index(i) = 38
1371	hom(:,2,38,:) = SPREAD( zw, 2, statistic_regions+1 )
1372
1373	CASE ( 'Sw' )
1374	dopr_index(i) = 39
1375	hom(:,2,39,:) = SPREAD( zw, 2, statistic_regions+1 )
1376
1377	CASE ( 'q', '#q' )
1378	IF ( .NOT. cloud_physics ) THEN
1379	IF ( myid == 0 ) THEN
1380	PRINT*, '+++ check_parameters: data_output_pr = ', &
1381	data_output_pr(i), &
1382	' is not implemented for cloud_physics = FALSE'
1383	ENDIF
1384	CALL local_stop
1385	ELSE
1386	dopr_index(i) = 41
1387	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
1388	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1389	dopr_initial_index(i) = 26
1390	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1391	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1392	data_output_pr(i) = data_output_pr(i)(2:)
1393	ENDIF
1394	ENDIF
1395
1396	CASE ( 's', '#s' )
1397	IF ( .NOT. passive_scalar ) THEN
1398	IF ( myid == 0 ) THEN
1399	PRINT*, '+++ check_parameters: data_output_pr = ', &
1400	data_output_pr(i), &
1401	' is not implemented for passive_scalar = FALSE'
1402	ENDIF
1403	CALL local_stop
1404	ELSE
1405	dopr_index(i) = 41
1406	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
1407	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1408	dopr_initial_index(i) = 26
1409	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1410	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1411	data_output_pr(i) = data_output_pr(i)(2:)
1412	ENDIF
1413	ENDIF
1414
1415	CASE ( 'qv', '#qv' )
1416	IF ( .NOT. cloud_physics ) THEN
1417	dopr_index(i) = 41
1418	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
1419	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1420	dopr_initial_index(i) = 26
1421	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1422	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1423	data_output_pr(i) = data_output_pr(i)(2:)
1424	ENDIF
1425	ELSE
1426	dopr_index(i) = 42
1427	hom(:,2,42,:) = SPREAD( zu, 2, statistic_regions+1 )
1428	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1429	dopr_initial_index(i) = 27
1430	hom(:,2,27,:) = SPREAD( zu, 2, statistic_regions+1 )
1431	hom(nzb,2,27,:) = 0.0 ! weil zu(nzb) negativ ist
1432	data_output_pr(i) = data_output_pr(i)(2:)
1433	ENDIF
1434	ENDIF
1435
1436	CASE ( 'lpt', '#lpt' )
1437	IF ( .NOT. cloud_physics ) THEN
1438	IF ( myid == 0 ) THEN
1439	PRINT*, '+++ check_parameters: data_output_pr = ', &
1440	data_output_pr(i), &
1441	' is not implemented for cloud_physics = FALSE'
1442	ENDIF
1443	CALL local_stop
1444	ELSE
1445	dopr_index(i) = 4
1446	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
1447	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1448	dopr_initial_index(i) = 7
1449	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
1450	hom(nzb,2,7,:) = 0.0 ! weil zu(nzb) negativ ist
1451	data_output_pr(i) = data_output_pr(i)(2:)
1452	ENDIF
1453	ENDIF
1454
1455	CASE ( 'vpt', '#vpt' )
1456	dopr_index(i) = 44
1457	hom(:,2,44,:) = SPREAD( zu, 2, statistic_regions+1 )
1458	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1459	dopr_initial_index(i) = 29
1460	hom(:,2,29,:) = SPREAD( zu, 2, statistic_regions+1 )
1461	hom(nzb,2,29,:) = 0.0 ! weil zu(nzb) negativ ist
1462	data_output_pr(i) = data_output_pr(i)(2:)
1463	ENDIF
1464
1465	CASE ( 'w"vpt"' )
1466	dopr_index(i) = 45
1467	hom(:,2,45,:) = SPREAD( zw, 2, statistic_regions+1 )
1468
1469	CASE ( 'wvpt' )
1470	dopr_index(i) = 46
1471	hom(:,2,46,:) = SPREAD( zw, 2, statistic_regions+1 )
1472
1473	CASE ( 'wvpt' )
1474	dopr_index(i) = 47
1475	hom(:,2,47,:) = SPREAD( zw, 2, statistic_regions+1 )
1476
1477	CASE ( 'w"q"' )
1478	IF ( .NOT. cloud_physics ) THEN
1479	IF ( myid == 0 ) THEN
1480	PRINT*, '+++ check_parameters: data_output_pr = ', &
1481	data_output_pr(i), &
1482	' is not implemented for cloud_physics = FALSE'
1483	ENDIF
1484	CALL local_stop
1485	ELSE
1486	dopr_index(i) = 48
1487	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
1488	ENDIF
1489
1490	CASE ( 'wq' )
1491	IF ( .NOT. cloud_physics ) THEN
1492	IF ( myid == 0 ) THEN
1493	PRINT*, '+++ check_parameters: data_output_pr = ', &
1494	data_output_pr(i), &
1495	' is not implemented for cloud_physics = FALSE'
1496	ENDIF
1497	CALL local_stop
1498	ELSE
1499	dopr_index(i) = 49
1500	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
1501	ENDIF
1502
1503	CASE ( 'wq' )
1504	IF ( .NOT. cloud_physics ) THEN
1505	IF ( myid == 0 ) THEN
1506	PRINT*, '+++ check_parameters: data_output_pr = ', &
1507	data_output_pr(i), &
1508	' is not implemented for cloud_physics = FALSE'
1509	ENDIF
1510	CALL local_stop
1511	ELSE
1512	dopr_index(i) = 50
1513	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
1514	ENDIF
1515
1516	CASE ( 'w"s"' )
1517	IF ( .NOT. passive_scalar ) THEN
1518	IF ( myid == 0 ) THEN
1519	PRINT*, '+++ check_parameters: data_output_pr = ', &
1520	data_output_pr(i), &
1521	' is not implemented for passive_scalar = FALSE'
1522	ENDIF
1523	CALL local_stop
1524	ELSE
1525	dopr_index(i) = 48
1526	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
1527	ENDIF
1528
1529	CASE ( 'ws' )
1530	IF ( .NOT. passive_scalar ) THEN
1531	IF ( myid == 0 ) THEN
1532	PRINT*, '+++ check_parameters: data_output_pr = ', &
1533	data_output_pr(i), &
1534	' is not implemented for passive_scalar = FALSE'
1535	ENDIF
1536	CALL local_stop
1537	ELSE
1538	dopr_index(i) = 49
1539	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
1540	ENDIF
1541
1542	CASE ( 'ws' )
1543	IF ( .NOT. passive_scalar ) THEN
1544	IF ( myid == 0 ) THEN
1545	PRINT*, '+++ check_parameters: data_output_pr = ', &
1546	data_output_pr(i), &
1547	' is not implemented for passive_scalar = FALSE'
1548	ENDIF
1549	CALL local_stop
1550	ELSE
1551	dopr_index(i) = 50
1552	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
1553	ENDIF
1554
1555	CASE ( 'w"qv"' )
1556	IF ( humidity .AND. .NOT. cloud_physics ) &
1557	THEN
1558	dopr_index(i) = 48
1559	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
1560	ELSEIF( humidity .AND. cloud_physics ) THEN
1561	dopr_index(i) = 51
1562	hom(:,2,51,:) = SPREAD( zw, 2, statistic_regions+1 )
1563	ELSE
1564	IF ( myid == 0 ) THEN
1565	PRINT*, '+++ check_parameters: data_output_pr = ', &
1566	data_output_pr(i), &
1567	' is not implemented for cloud_physics = FALSE', &
1568	' and humidity = FALSE'
1569	ENDIF
1570	CALL local_stop
1571	ENDIF
1572
1573	CASE ( 'wqv' )
1574	IF ( humidity .AND. .NOT. cloud_physics ) &
1575	THEN
1576	dopr_index(i) = 49
1577	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
1578	ELSEIF( humidity .AND. cloud_physics ) THEN
1579	dopr_index(i) = 52
1580	hom(:,2,52,:) = SPREAD( zw, 2, statistic_regions+1 )
1581	ELSE
1582	IF ( myid == 0 ) THEN
1583	PRINT*, '+++ check_parameters: data_output_pr = ', &
1584	data_output_pr(i), &
1585	' is not implemented for cloud_physics = FALSE', &
1586	' and humidity = FALSE'
1587	ENDIF
1588	CALL local_stop
1589	ENDIF
1590
1591	CASE ( 'wqv' )
1592	IF ( humidity .AND. .NOT. cloud_physics ) &
1593	THEN
1594	dopr_index(i) = 50
1595	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
1596	ELSEIF( humidity .AND. cloud_physics ) THEN
1597	dopr_index(i) = 53
1598	hom(:,2,53,:) = SPREAD( zw, 2, statistic_regions+1 )
1599	ELSE
1600	IF ( myid == 0 ) THEN
1601	PRINT*, '+++ check_parameters: data_output_pr = ', &
1602	data_output_pr(i), &
1603	' is not implemented for cloud_physics = FALSE', &
1604	' and humidity = FALSE'
1605	ENDIF
1606	CALL local_stop
1607	ENDIF
1608
1609	CASE ( 'ql' )
1610	IF ( .NOT. cloud_physics .AND. .NOT. cloud_droplets ) THEN
1611	IF ( myid == 0 ) THEN
1612	PRINT*, '+++ check_parameters: data_output_pr = ', &
1613	data_output_pr(i), &
1614	' is not implemented for cloud_physics = FALSE'
1615	ENDIF
1616	CALL local_stop
1617	ELSE
1618	dopr_index(i) = 54
1619	hom(:,2,54,:) = SPREAD( zu, 2, statistic_regions+1 )
1620	ENDIF
1621
1622	CASE ( 'wuu*/dz' )
1623	dopr_index(i) = 55
1624	hom(:,2,55,:) = SPREAD( zu, 2, statistic_regions+1 )
1625
1626	CASE ( 'wp/dz' )
1627	dopr_index(i) = 56
1628	hom(:,2,56,:) = SPREAD( zu, 2, statistic_regions+1 )
1629
1630	CASE ( 'w"e/dz' )
1631	dopr_index(i) = 57
1632	hom(:,2,57,:) = SPREAD( zu, 2, statistic_regions+1 )
1633
1634	CASE ( 'u"pt"' )
1635	dopr_index(i) = 58
1636	hom(:,2,58,:) = SPREAD( zu, 2, statistic_regions+1 )
1637
1638	CASE ( 'upt' )
1639	dopr_index(i) = 59
1640	hom(:,2,59,:) = SPREAD( zu, 2, statistic_regions+1 )
1641
1642	CASE ( 'upt_t' )
1643	dopr_index(i) = 60
1644	hom(:,2,60,:) = SPREAD( zu, 2, statistic_regions+1 )
1645
1646	CASE ( 'v"pt"' )
1647	dopr_index(i) = 61
1648	hom(:,2,61,:) = SPREAD( zu, 2, statistic_regions+1 )
1649
1650	CASE ( 'vpt' )
1651	dopr_index(i) = 62
1652	hom(:,2,62,:) = SPREAD( zu, 2, statistic_regions+1 )
1653
1654	CASE ( 'vpt_t' )
1655	dopr_index(i) = 63
1656	hom(:,2,63,:) = SPREAD( zu, 2, statistic_regions+1 )
1657
1658
1659	CASE DEFAULT
1660	IF ( myid == 0 ) THEN
1661	PRINT*, '+++ check_parameters: unknown output profile: ', &
1662	'data_output_pr = ', data_output_pr(i)
1663	ENDIF
1664	CALL local_stop
1665
1666	END SELECT
1667	!
1668	!-- Check to which of the predefined coordinate systems the profile belongs
1669	DO k = 1, crmax
1670	IF ( INDEX( cross_profiles(k), ' '//TRIM( data_output_pr(i) )//' ' ) &
1671	/=0 ) &
1672	THEN
1673	dopr_crossindex(i) = k
1674	EXIT
1675	ENDIF
1676	ENDDO
1677	!
1678	!-- Generate the text for the labels of the PROFIL output file. "-characters
1679	!-- must be substituted, otherwise PROFIL would interpret them as TeX
1680	!-- control characters
1681	dopr_label(i) = data_output_pr(i)
1682	position = INDEX( dopr_label(i) , '"' )
1683	DO WHILE ( position /= 0 )
1684	dopr_label(i)(position:position) = ''''
1685	position = INDEX( dopr_label(i) , '"' )
1686	ENDDO
1687
1688	ENDDO
1689
1690	!
1691	!-- y-value range of the coordinate system (PROFIL).
1692	!-- x-value range determined in plot_1d.
1693	cross_uymin = 0.0
1694	IF ( z_max_do1d == -1.0 ) THEN
1695	cross_uymax = zu(nzt+1)
1696	ELSEIF ( z_max_do1d < zu(nzb+1) .OR. z_max_do1d > zu(nzt+1) ) THEN
1697	IF ( myid == 0 ) PRINT*, '+++ check_parameters: z_max_do1d=', &
1698	z_max_do1d,' must be >= ', zu(nzb+1), &
1699	' or <= ', zu(nzt+1)
1700	CALL local_stop
1701	ELSE
1702	cross_uymax = z_max_do1d
1703	ENDIF
1704
1705	!
1706	!-- Check whether the chosen normalizing factor for the coordinate systems is
1707	!-- permissible
1708	DO i = 1, crmax
1709	SELECT CASE ( TRIM( cross_normalized_x(i) ) ) ! TRIM required on IBM
1710
1711	CASE ( '', 'wpt0', 'ws2', 'tsw2', 'ws3', 'ws2tsw', 'wstsw2' )
1712	j = 0
1713
1714	CASE DEFAULT
1715	IF ( myid == 0 ) THEN
1716	PRINT*, '+++ check_parameters: unknown normalize method'
1717	PRINT*, ' cross_normalized_x="',cross_normalized_x(i),'"'
1718	ENDIF
1719	CALL local_stop
1720
1721	END SELECT
1722	SELECT CASE ( TRIM( cross_normalized_y(i) ) ) ! TRIM required on IBM
1723
1724	CASE ( '', 'z_i' )
1725	j = 0
1726
1727	CASE DEFAULT
1728	IF ( myid == 0 ) THEN
1729	PRINT*, '+++ check_parameters: unknown normalize method'
1730	PRINT*, ' cross_normalized_y="',cross_normalized_y(i),'"'
1731	ENDIF
1732	CALL local_stop
1733
1734	END SELECT
1735	ENDDO
1736	!
1737	!-- Check normalized y-value range of the coordinate system (PROFIL)
1738	IF ( z_max_do1d_normalized /= -1.0 .AND. z_max_do1d_normalized <= 0.0 ) &
1739	THEN
1740	IF ( myid == 0 ) PRINT*,'+++ check_parameters: z_max_do1d_normalize', &
1741	'd=', z_max_do1d_normalized, ' must be >= 0.0'
1742	CALL local_stop
1743	ENDIF
1744
1745
1746	!
1747	!-- Append user-defined data output variables to the standard data output
1748	IF ( data_output_user(1) /= ' ' ) THEN
1749	i = 1
1750	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
1751	i = i + 1
1752	ENDDO
1753	j = 1
1754	DO WHILE ( data_output_user(j) /= ' ' .AND. j <= 100 )
1755	IF ( i > 100 ) THEN
1756	IF ( myid == 0 ) THEN
1757	PRINT*, '+++ check_parameters: number of output quantitities', &
1758	' given by data_output and data_output_user'
1759	PRINT*, ' exceeds the limit of 100'
1760	ENDIF
1761	CALL local_stop
1762	ENDIF
1763	data_output(i) = data_output_user(j)
1764	i = i + 1
1765	j = j + 1
1766	ENDDO
1767	ENDIF
1768
1769	!
1770	!-- Check and set steering parameters for 2d/3d data output and averaging
1771	i = 1
1772	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
1773	!
1774	!-- Check for data averaging
1775	ilen = LEN_TRIM( data_output(i) )
1776	j = 0 ! no data averaging
1777	IF ( ilen > 3 ) THEN
1778	IF ( data_output(i)(ilen-2:ilen) == '_av' ) THEN
1779	j = 1 ! data averaging
1780	data_output(i) = data_output(i)(1:ilen-3)
1781	ENDIF
1782	ENDIF
1783	!
1784	!-- Check for cross section or volume data
1785	ilen = LEN_TRIM( data_output(i) )
1786	k = 0 ! 3d data
1787	var = data_output(i)(1:ilen)
1788	IF ( ilen > 3 ) THEN
1789	IF ( data_output(i)(ilen-2:ilen) == '_xy' .OR. &
1790	data_output(i)(ilen-2:ilen) == '_xz' .OR. &
1791	data_output(i)(ilen-2:ilen) == '_yz' ) THEN
1792	k = 1 ! 2d data
1793	var = data_output(i)(1:ilen-3)
1794	ENDIF
1795	ENDIF
1796	!
1797	!-- Check for allowed value and set units
1798	SELECT CASE ( TRIM( var ) )
1799
1800	CASE ( 'e' )
1801	IF ( constant_diffusion ) THEN
1802	IF ( myid == 0 ) THEN
1803	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
1804	'" requires constant_diffusion = .FALSE.'
1805	ENDIF
1806	CALL local_stop
1807	ENDIF
1808	unit = 'm2/s2'
1809
1810	CASE ( 'pc', 'pr' )
1811	IF ( .NOT. particle_advection ) THEN
1812	IF ( myid == 0 ) THEN
1813	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
1814	'" requires particle package'
1815	PRINT*, ' (mrun-option "-p particles")'
1816	ENDIF
1817	CALL local_stop
1818	ENDIF
1819	IF ( TRIM( var ) == 'pc' ) unit = 'number'
1820	IF ( TRIM( var ) == 'pr' ) unit = 'm'
1821
1822	CASE ( 'q', 'vpt' )
1823	IF ( .NOT. humidity ) THEN
1824	IF ( myid == 0 ) THEN
1825	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
1826	'" requires humidity = .TRUE.'
1827	ENDIF
1828	CALL local_stop
1829	ENDIF
1830	IF ( TRIM( var ) == 'q' ) unit = 'kg/kg'
1831	IF ( TRIM( var ) == 'vpt' ) unit = 'K'
1832
1833	CASE ( 'ql' )
1834	IF ( .NOT. ( cloud_physics .OR. cloud_droplets ) ) THEN
1835	IF ( myid == 0 ) THEN
1836	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
1837	'" requires cloud_physics = .TRUE.'
1838	PRINT*, ' or cloud_droplets = .TRUE.'
1839	ENDIF
1840	CALL local_stop
1841	ENDIF
1842	unit = 'kg/kg'
1843
1844	CASE ( 'ql_c', 'ql_v', 'ql_vp' )
1845	IF ( .NOT. cloud_droplets ) THEN
1846	IF ( myid == 0 ) THEN
1847	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
1848	'" requires cloud_droplets = .TRUE.'
1849	ENDIF
1850	CALL local_stop
1851	ENDIF
1852	IF ( TRIM( var ) == 'ql_c' ) unit = 'kg/kg'
1853	IF ( TRIM( var ) == 'ql_v' ) unit = 'm3'
1854	IF ( TRIM( var ) == 'ql_vp' ) unit = 'none'
1855
1856	CASE ( 'qv' )
1857	IF ( .NOT. cloud_physics ) THEN
1858	IF ( myid == 0 ) THEN
1859	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
1860	'" requires cloud_physics = .TRUE.'
1861	ENDIF
1862	CALL local_stop
1863	ENDIF
1864	unit = 'kg/kg'
1865
1866	CASE ( 's' )
1867	IF ( .NOT. passive_scalar ) THEN
1868	IF ( myid == 0 ) THEN
1869	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
1870	'" requires passive_scalar = .TRUE.'
1871	ENDIF
1872	CALL local_stop
1873	ENDIF
1874	unit = 'conc'
1875
1876	CASE ( 'u', 't', 'lwp', 'pra', 'prr', 'z0' )
1877	IF ( k == 0 .OR. data_output(i)(ilen-2:ilen) /= '_xy' ) THEN
1878	IF ( myid == 0 ) THEN
1879	PRINT*, '+++ check_parameters: illegal value for data_',&
1880	'output: "', TRIM( var ), '" is only allowed'
1881	PRINT*, ' for horizontal cross section'
1882	ENDIF
1883	CALL local_stop
1884	ENDIF
1885	IF ( TRIM( var ) == 'lwp*' .AND. .NOT. cloud_physics ) THEN
1886	IF ( myid == 0 ) THEN
1887	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
1888	'" requires cloud_physics = .TRUE.'
1889	ENDIF
1890	CALL local_stop
1891	ENDIF
1892	IF ( TRIM( var ) == 'pra*' .AND. .NOT. precipitation ) THEN
1893	IF ( myid == 0 ) THEN
1894	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
1895	'" requires precipitation = .TRUE.'
1896	ENDIF
1897	CALL local_stop
1898	ENDIF
1899	IF ( TRIM( var ) == 'pra*' .AND. j == 1 ) THEN
1900	IF ( myid == 0 ) THEN
1901	PRINT*, '+++ check_parameters: temporal averaging of ', &
1902	' precipitation amount "', TRIM( var ), &
1903	'" not possible'
1904	ENDIF
1905	CALL local_stop
1906	ENDIF
1907	IF ( TRIM( var ) == 'prr*' .AND. .NOT. precipitation ) THEN
1908	IF ( myid == 0 ) THEN
1909	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
1910	'" requires precipitation = .TRUE.'
1911	ENDIF
1912	CALL local_stop
1913	ENDIF
1914
1915
1916	IF ( TRIM( var ) == 'u*' ) unit = 'm/s'
1917	IF ( TRIM( var ) == 't*' ) unit = 'K'
1918	IF ( TRIM( var ) == 'lwp' ) unit = 'kg/kgm'
1919	IF ( TRIM( var ) == 'pra*' ) unit = 'mm'
1920	IF ( TRIM( var ) == 'prr*' ) unit = 'mm/s'
1921	IF ( TRIM( var ) == 'z0*' ) unit = 'm'
1922
1923	CASE ( 'p', 'pt', 'u', 'v', 'w' )
1924	IF ( TRIM( var ) == 'p' ) unit = 'Pa'
1925	IF ( TRIM( var ) == 'pt' ) unit = 'K'
1926	IF ( TRIM( var ) == 'u' ) unit = 'm/s'
1927	IF ( TRIM( var ) == 'v' ) unit = 'm/s'
1928	IF ( TRIM( var ) == 'w' ) unit = 'm/s'
1929	CONTINUE
1930
1931	CASE DEFAULT
1932	CALL user_check_data_output( var, unit )
1933
1934	IF ( unit == 'illegal' ) THEN
1935	IF ( myid == 0 ) THEN
1936	IF ( data_output_user(1) /= ' ' ) THEN
1937	PRINT*, '+++ check_parameters: illegal value for data_',&
1938	'output or data_output_user: "', &
1939	TRIM( data_output(i) ), '"'
1940	ELSE
1941	PRINT*, '+++ check_parameters: illegal value for data_',&
1942	'output: "', TRIM( data_output(i) ), '"'
1943	ENDIF
1944	ENDIF
1945	CALL local_stop
1946	ENDIF
1947
1948	END SELECT
1949	!
1950	!-- Set the internal steering parameters appropriately
1951	IF ( k == 0 ) THEN
1952	do3d_no(j) = do3d_no(j) + 1
1953	do3d(j,do3d_no(j)) = data_output(i)
1954	do3d_unit(j,do3d_no(j)) = unit
1955	ELSE
1956	do2d_no(j) = do2d_no(j) + 1
1957	do2d(j,do2d_no(j)) = data_output(i)
1958	do2d_unit(j,do2d_no(j)) = unit
1959	IF ( data_output(i)(ilen-2:ilen) == '_xy' ) THEN
1960	data_output_xy(j) = .TRUE.
1961	ENDIF
1962	IF ( data_output(i)(ilen-2:ilen) == '_xz' ) THEN
1963	data_output_xz(j) = .TRUE.
1964	ENDIF
1965	IF ( data_output(i)(ilen-2:ilen) == '_yz' ) THEN
1966	data_output_yz(j) = .TRUE.
1967	ENDIF
1968	ENDIF
1969
1970	IF ( j == 1 ) THEN
1971	!
1972	!-- Check, if variable is already subject to averaging
1973	found = .FALSE.
1974	DO k = 1, doav_n
1975	IF ( TRIM( doav(k) ) == TRIM( var ) ) found = .TRUE.
1976	ENDDO
1977
1978	IF ( .NOT. found ) THEN
1979	doav_n = doav_n + 1
1980	doav(doav_n) = var
1981	ENDIF
1982	ENDIF
1983
1984	i = i + 1
1985	ENDDO
1986
1987	!
1988	!-- Store sectional planes in one shared array
1989	section(:,1) = section_xy
1990	section(:,2) = section_xz
1991	section(:,3) = section_yz
1992
1993	!
1994	!-- Upper plot limit (grid point value) for 1D profiles
1995	IF ( z_max_do1d == -1.0 ) THEN
1996	nz_do1d = nzt+1
1997	ELSE
1998	DO k = nzb+1, nzt+1
1999	nz_do1d = k
2000	IF ( zw(k) > z_max_do1d ) EXIT
2001	ENDDO
2002	ENDIF
2003
2004	!
2005	!-- Upper plot limit for 2D vertical sections
2006	IF ( z_max_do2d == -1.0 ) z_max_do2d = zu(nzt)
2007	IF ( z_max_do2d < zu(nzb+1) .OR. z_max_do2d > zu(nzt) ) THEN
2008	IF ( myid == 0 ) PRINT*, '+++ check_parameters: z_max_do2d=', &
2009	z_max_do2d, ' must be >= ', zu(nzb+1), &
2010	'(zu(nzb+1)) and <= ', zu(nzt), ' (zu(nzt))'
2011	CALL local_stop
2012	ENDIF
2013
2014	!
2015	!-- Upper plot limit for 3D arrays
2016	IF ( nz_do3d == -9999 ) nz_do3d = nzt + 1
2017
2018	!
2019	!-- Determine and check accuracy for compressed 3D plot output
2020	IF ( do3d_compress ) THEN
2021	!
2022	!-- Compression only permissible on T3E machines
2023	IF ( host(1:3) /= 't3e' ) THEN
2024	IF ( myid == 0 ) THEN
2025	PRINT*, '+++ check_parameters: do3d_compress = .TRUE. not allow', &
2026	'ed on host "', TRIM( host ), '"'
2027	ENDIF
2028	CALL local_stop
2029	ENDIF
2030
2031	i = 1
2032	DO WHILE ( do3d_comp_prec(i) /= ' ' )
2033
2034	ilen = LEN_TRIM( do3d_comp_prec(i) )
2035	IF ( LLT( do3d_comp_prec(i)(ilen:ilen), '0' ) .OR. &
2036	LGT( do3d_comp_prec(i)(ilen:ilen), '9' ) ) THEN
2037	IF ( myid == 0 ) THEN
2038	PRINT*, '+++ check_parameters: illegal precision: ', &
2039	'do3d_comp_prec(', i, ')="', TRIM(do3d_comp_prec(i)),'"'
2040	ENDIF
2041	CALL local_stop
2042	ENDIF
2043
2044	prec = IACHAR( do3d_comp_prec(i)(ilen:ilen) ) - IACHAR( '0' )
2045	var = do3d_comp_prec(i)(1:ilen-1)
2046
2047	SELECT CASE ( var )
2048
2049	CASE ( 'u' )
2050	j = 1
2051	CASE ( 'v' )
2052	j = 2
2053	CASE ( 'w' )
2054	j = 3
2055	CASE ( 'p' )
2056	j = 4
2057	CASE ( 'pt' )
2058	j = 5
2059
2060	CASE DEFAULT
2061	IF ( myid == 0 ) THEN
2062	PRINT*, '+++ check_parameters: unknown variable in ', &
2063	'assignment'
2064	PRINT*, ' do3d_comp_prec(', i, ')="', &
2065	TRIM( do3d_comp_prec(i) ),'"'
2066	ENDIF
2067	CALL local_stop
2068
2069	END SELECT
2070
2071	plot_3d_precision(j)%precision = prec
2072	i = i + 1
2073
2074	ENDDO
2075	ENDIF
2076
2077	!
2078	!-- Check the data output format(s)
2079	IF ( data_output_format(1) == ' ' ) THEN
2080	!
2081	!-- Default value
2082	netcdf_output = .TRUE.
2083	ELSE
2084	i = 1
2085	DO WHILE ( data_output_format(i) /= ' ' )
2086
2087	SELECT CASE ( data_output_format(i) )
2088
2089	CASE ( 'netcdf' )
2090	netcdf_output = .TRUE.
2091	CASE ( 'iso2d' )
2092	iso2d_output = .TRUE.
2093	CASE ( 'profil' )
2094	profil_output = .TRUE.
2095	CASE ( 'avs' )
2096	avs_output = .TRUE.
2097
2098	CASE DEFAULT
2099	IF ( myid == 0 ) THEN
2100	PRINT*, '+++ check_parameters:'
2101	PRINT*, ' unknown value for data_output_format "', &
2102	TRIM( data_output_format(i) ),'"'
2103	ENDIF
2104	CALL local_stop
2105
2106	END SELECT
2107
2108	i = i + 1
2109	IF ( i > 10 ) EXIT
2110
2111	ENDDO
2112
2113	ENDIF
2114
2115	!
2116	!-- Check netcdf precison
2117	ldum = .FALSE.
2118	CALL define_netcdf_header( 'ch', ldum, 0 )
2119
2120	!
2121	!-- Check, whether a constant diffusion coefficient shall be used
2122	IF ( km_constant /= -1.0 ) THEN
2123	IF ( km_constant < 0.0 ) THEN
2124	IF ( myid == 0 ) PRINT*, '+++ check_parameters: km_constant=', &
2125	km_constant, ' < 0.0'
2126	CALL local_stop
2127	ELSE
2128	IF ( prandtl_number < 0.0 ) THEN
2129	IF ( myid == 0 ) PRINT*,'+++ check_parameters: prandtl_number=',&
2130	prandtl_number, ' < 0.0'
2131	CALL local_stop
2132	ENDIF
2133	constant_diffusion = .TRUE.
2134
2135	IF ( prandtl_layer ) THEN
2136	IF ( myid == 0 ) PRINT*, '+++ check_parameters: prandtl_layer ',&
2137	'is not allowed with fixed value of km'
2138	CALL local_stop
2139	ENDIF
2140	ENDIF
2141	ENDIF
2142
2143	!
2144	!-- In case of non-cyclic lateral boundaries, set the default maximum value
2145	!-- for the horizontal diffusivity used within the outflow damping layer,
2146	!-- and check/set the width of the damping layer
2147	IF ( bc_lr /= 'cyclic' ) THEN
2148	IF ( km_damp_max == -1.0 ) THEN
2149	km_damp_max = 0.5 * dx
2150	ENDIF
2151	IF ( outflow_damping_width == -1.0 ) THEN
2152	outflow_damping_width = MIN( 20, nx/2 )
2153	ENDIF
2154	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > nx ) THEN
2155	IF ( myid == 0 ) PRINT*, '+++ check_parameters: outflow_damping w',&
2156	'idth out of range'
2157	CALL local_stop
2158	ENDIF
2159	ENDIF
2160
2161	IF ( bc_ns /= 'cyclic' ) THEN
2162	IF ( km_damp_max == -1.0 ) THEN
2163	km_damp_max = 0.5 * dy
2164	ENDIF
2165	IF ( outflow_damping_width == -1.0 ) THEN
2166	outflow_damping_width = MIN( 20, ny/2 )
2167	ENDIF
2168	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > ny ) THEN
2169	IF ( myid == 0 ) PRINT*, '+++ check_parameters: outflow_damping w',&
2170	'idth out of range'
2171	CALL local_stop
2172	ENDIF
2173	ENDIF
2174
2175	!
2176	!-- Check value range for rif
2177	IF ( rif_min >= rif_max ) THEN
2178	IF ( myid == 0 ) PRINT*, '+++ check_parameters: rif_min=', rif_min, &
2179	' must be less than rif_max=', rif_max
2180	CALL local_stop
2181	ENDIF
2182
2183	!
2184	!-- Determine upper and lower hight level indices for random perturbations
2185	IF ( disturbance_level_b == -1.0 ) THEN
2186	disturbance_level_b = zu(nzb+3)
2187	disturbance_level_ind_b = nzb + 3
2188	ELSEIF ( disturbance_level_b < zu(3) ) THEN
2189	IF ( myid == 0 ) PRINT*, '+++ check_parameters: disturbance_level_b=',&
2190	disturbance_level_b, ' must be >= ',zu(3), &
2191	'(zu(3))'
2192	CALL local_stop
2193	ELSEIF ( disturbance_level_b > zu(nzt-2) ) THEN
2194	IF ( myid == 0 ) PRINT*, '+++ check_parameters: disturbance_level_b=',&
2195	disturbance_level_b, ' must be <= ',zu(nzt-2),&
2196	'(zu(nzt-2))'
2197	CALL local_stop
2198	ELSE
2199	DO k = 3, nzt-2
2200	IF ( disturbance_level_b <= zu(k) ) THEN
2201	disturbance_level_ind_b = k
2202	EXIT
2203	ENDIF
2204	ENDDO
2205	ENDIF
2206
2207	IF ( disturbance_level_t == -1.0 ) THEN
2208	disturbance_level_t = zu(nzt/3)
2209	disturbance_level_ind_t = nzt / 3
2210	ELSEIF ( disturbance_level_t > zu(nzt-2) ) THEN
2211	IF ( myid == 0 ) PRINT*, '+++ check_parameters: disturbance_level_t=',&
2212	disturbance_level_t, ' must be <= ',zu(nzt-2),&
2213	'(zu(nzt-2))'
2214	CALL local_stop
2215	ELSEIF ( disturbance_level_t < disturbance_level_b ) THEN
2216	IF ( myid == 0 ) PRINT*, '+++ check_parameters: disturbance_level_t=',&
2217	disturbance_level_t, ' must be >= ', &
2218	'disturbance_level_b=', disturbance_level_b
2219	CALL local_stop
2220	ELSE
2221	DO k = 3, nzt-2
2222	IF ( disturbance_level_t <= zu(k) ) THEN
2223	disturbance_level_ind_t = k
2224	EXIT
2225	ENDIF
2226	ENDDO
2227	ENDIF
2228
2229	!
2230	!-- Check again whether the levels determined this way are ok.
2231	!-- Error may occur at automatic determination and too few grid points in
2232	!-- z-direction.
2233	IF ( disturbance_level_ind_t < disturbance_level_ind_b ) THEN
2234	IF ( myid == 0 ) PRINT*, '+++ check_parameters: ', &
2235	'disturbance_level_ind_t=', &
2236	disturbance_level_ind_t, ' must be >= ', &
2237	'disturbance_level_ind_b=', &
2238	disturbance_level_ind_b
2239	CALL local_stop
2240	ENDIF
2241
2242	!
2243	!-- Determine the horizontal index range for random perturbations.
2244	!-- In case of non-cyclic horizontal boundaries, no perturbations are imposed
2245	!-- near the inflow and the perturbation area is further limited to ...(1)
2246	!-- after the initial phase of the flow.
2247	dist_nxl = 0; dist_nxr = nx
2248	dist_nys = 0; dist_nyn = ny
2249	IF ( bc_lr /= 'cyclic' ) THEN
2250	IF ( inflow_disturbance_begin == -1 ) THEN
2251	inflow_disturbance_begin = MIN( 10, nx/2 )
2252	ENDIF
2253	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > nx )&
2254	THEN
2255	IF ( myid == 0 ) PRINT*, '+++ check_parameters: inflow_disturbance',&
2256	'_begin out of range'
2257	CALL local_stop
2258	ENDIF
2259	IF ( inflow_disturbance_end == -1 ) THEN
2260	inflow_disturbance_end = MIN( 100, 3*nx/4 )
2261	ENDIF
2262	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > nx ) &
2263	THEN
2264	IF ( myid == 0 ) PRINT*, '+++ check_parameters: inflow_disturbance',&
2265	'_end out of range'
2266	CALL local_stop
2267	ENDIF
2268	ELSEIF ( bc_ns /= 'cyclic' ) THEN
2269	IF ( inflow_disturbance_begin == -1 ) THEN
2270	inflow_disturbance_begin = MIN( 10, ny/2 )
2271	ENDIF
2272	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > ny )&
2273	THEN
2274	IF ( myid == 0 ) PRINT*, '+++ check_parameters: inflow_disturbance',&
2275	'_begin out of range'
2276	CALL local_stop
2277	ENDIF
2278	IF ( inflow_disturbance_end == -1 ) THEN
2279	inflow_disturbance_end = MIN( 100, 3*ny/4 )
2280	ENDIF
2281	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > ny ) &
2282	THEN
2283	IF ( myid == 0 ) PRINT*, '+++ check_parameters: inflow_disturbance',&
2284	'_end out of range'
2285	CALL local_stop
2286	ENDIF
2287	ENDIF
2288
2289	IF ( bc_lr == 'radiation/dirichlet' ) THEN
2290	dist_nxr = nx - inflow_disturbance_begin
2291	dist_nxl(1) = nx - inflow_disturbance_end
2292	ELSEIF ( bc_lr == 'dirichlet/radiation' ) THEN
2293	dist_nxl = inflow_disturbance_begin
2294	dist_nxr(1) = inflow_disturbance_end
2295	ENDIF
2296	IF ( bc_ns == 'dirichlet/radiation' ) THEN
2297	dist_nyn = ny - inflow_disturbance_begin
2298	dist_nys(1) = ny - inflow_disturbance_end
2299	ELSEIF ( bc_ns == 'radiation/dirichlet' ) THEN
2300	dist_nys = inflow_disturbance_begin
2301	dist_nyn(1) = inflow_disturbance_end
2302	ENDIF
2303
2304	!
2305	!-- Check random generator
2306	IF ( random_generator /= 'system-specific' .AND. &
2307	random_generator /= 'numerical-recipes' ) THEN
2308	IF ( myid == 0 ) THEN
2309	PRINT*, '+++ check_parameters:'
2310	PRINT*, ' unknown random generator: random_generator=', &
2311	random_generator
2312	ENDIF
2313	CALL local_stop
2314	ENDIF
2315
2316	!
2317	!-- Determine damping level index for 1D model
2318	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
2319	IF ( damp_level_1d == -1.0 ) THEN
2320	damp_level_1d = zu(nzt+1)
2321	damp_level_ind_1d = nzt + 1
2322	ELSEIF ( damp_level_1d < 0.0 .OR. damp_level_1d > zu(nzt+1) ) THEN
2323	IF ( myid == 0 ) PRINT*, '+++ check_parameters: damp_level_1d=', &
2324	damp_level_1d, ' must be > 0.0 and < ', &
2325	'zu(nzt+1)', zu(nzt+1)
2326	CALL local_stop
2327	ELSE
2328	DO k = 1, nzt+1
2329	IF ( damp_level_1d <= zu(k) ) THEN
2330	damp_level_ind_1d = k
2331	EXIT
2332	ENDIF
2333	ENDDO
2334	ENDIF
2335	ENDIF
2336	!
2337	!-- Check some other 1d-model parameters
2338	IF ( TRIM( mixing_length_1d ) /= 'as_in_3d_model' .AND. &
2339	TRIM( mixing_length_1d ) /= 'blackadar' ) THEN
2340	IF ( myid == 0 ) PRINT*, '+++ check_parameters: mixing_length_1d = "', &
2341	TRIM( mixing_length_1d ), '" is unknown'
2342	CALL local_stop
2343	ENDIF
2344	IF ( TRIM( dissipation_1d ) /= 'as_in_3d_model' .AND. &
2345	TRIM( dissipation_1d ) /= 'detering' ) THEN
2346	IF ( myid == 0 ) PRINT*, '+++ check_parameters: dissipation_1d = "', &
2347	TRIM( dissipation_1d ), '" is unknown'
2348	CALL local_stop
2349	ENDIF
2350
2351	!
2352	!-- Set time for the next user defined restart (time_restart is the
2353	!-- internal parameter for steering restart events)
2354	IF ( restart_time /= 9999999.9 ) THEN
2355	IF ( restart_time > simulated_time ) time_restart = restart_time
2356	ELSE
2357	!
2358	!-- In case of a restart run, set internal parameter to default (no restart)
2359	!-- if the NAMELIST-parameter restart_time is omitted
2360	time_restart = 9999999.9
2361	ENDIF
2362
2363	!
2364	!-- Set default value of the time needed to terminate a model run
2365	IF ( termination_time_needed == -1.0 ) THEN
2366	IF ( host(1:3) == 'ibm' ) THEN
2367	termination_time_needed = 300.0
2368	ELSE
2369	termination_time_needed = 35.0
2370	ENDIF
2371	ENDIF
2372
2373	!
2374	!-- Check the time needed to terminate a model run
2375	IF ( host(1:3) == 't3e' ) THEN
2376	!
2377	!-- Time needed must be at least 30 seconds on all CRAY machines, because
2378	!-- MPP_TREMAIN gives the remaining CPU time only in steps of 30 seconds
2379	IF ( termination_time_needed <= 30.0 ) THEN
2380	IF ( myid == 0 ) THEN
2381	PRINT*, '+++ check_parameters: termination_time_needed', &
2382	termination_time_needed
2383	PRINT*, ' must be > 30.0 on host "', host, &
2384	'"'
2385	ENDIF
2386	CALL local_stop
2387	ENDIF
2388	ELSEIF ( host(1:3) == 'ibm' ) THEN
2389	!
2390	!-- On IBM-regatta machines the time should be at least 300 seconds,
2391	!-- because the job time consumed before executing palm (for compiling,
2392	!-- copying of files, etc.) has to be regarded
2393	IF ( termination_time_needed < 300.0 ) THEN
2394	IF ( myid == 0 ) THEN
2395	PRINT*, '+++ WARNING: check_parameters: termination_time_', &
2396	'needed', termination_time_needed
2397	PRINT*, ' should be >= 300.0', &
2398	' on host "', host, '"'
2399	ENDIF
2400	ENDIF
2401	ENDIF
2402
2403
2404	END SUBROUTINE check_parameters

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |