Home

Context Navigation

source: palm/trunk/SOURCE/check_parameters.f90 @ 668

Last change on this file since 668 was 668, checked in by suehring, 13 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 126.6 KB

Line
1	SUBROUTINE check_parameters
2
3	!------------------------------------------------------------------------------!
4	! Current revisions:
5	! -----------------
6	!
7	!
8	! Former revisions:
9	! -----------------
10	! $Id: check_parameters.f90 668 2010-12-23 13:22:58Z suehring $
11	!
12	! 667 2010-12-23 12:06:00Z suehring/gryschka
13	! Exchange of parameters between ocean and atmosphere via PE0
14	! Check for illegal combination of ws-scheme and timestep scheme.
15	! Check for topography and ws-scheme.
16	! Check for not cyclic boundary conditions in combination with ws-scheme and
17	! loop_optimization = 'vector'.
18	! Check for call_psolver_at_all_substeps and ws-scheme for momentum_advec.
19	! Different processor/grid topology in atmosphere and ocean is now allowed!
20	! Bugfixes in checking for conserve_volume_flow_mode
21	! 600 2010-11-24 16:10:51Z raasch
22	! change due to new default value of surface_waterflux
23	! 580 2010-10-05 13:59:11Z heinze
24	! renaming of ws_vertical_gradient_level to subs_vertical_gradient_level
25	!
26	! 567 2010-10-01 10:46:30Z helmke
27	! calculating masks changed
28	!
29	! 564 2010-09-30 13:18:59Z helmke
30	! palm message identifiers of masked output changed, 20 replaced by max_masks
31	!
32	! 553 2010-09-01 14:09:06Z weinreis
33	! masks is calculated and removed from inipar
34	!
35	! 531 2010-04-21 06:47:21Z heinze
36	! Bugfix: unit of hyp changed to dbar
37	!
38	! 524 2010-03-30 02:04:51Z raasch
39	! Bugfix: "/" in netcdf profile variable names replaced by ":"
40	!
41	! 493 2010-03-01 08:30:24Z raasch
42	! netcdf_data_format is checked
43	!
44	! 411 2009-12-11 14:15:58Z heinze
45	! Enabled passive scalar/humidity wall fluxes for non-flat topography
46	! Initialization of large scale vertical motion (subsidence/ascent)
47	!
48	! 410 2009-12-04 17:05:40Z letzel
49	! masked data output
50	!
51	! 388 2009-09-23 09:40:33Z raasch
52	! Check profiles fpr prho and hyp.
53	! Bugfix: output of averaged 2d/3d quantities requires that an avaraging
54	! interval has been set, respective error message is included
55	! bc_lr_cyc and bc_ns_cyc are set,
56	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
57	! Check for illegal entries in section_xy\|xz\|yz that exceed nz+1\|ny+1\|nx+1
58	! Coupling with independent precursor runs.
59	! Check particle_color, particle_dvrpsize, color_interval, dvrpsize_interval
60	! Bugfix: pressure included for profile output
61	! Check pressure gradient conditions
62	! topography_grid_convention moved from user_check_parameters
63	! 'single_street_canyon'
64	! Added shf* and qsws* to the list of available output data
65	!
66	! 222 2009-01-12 16:04:16Z letzel
67	! +user_check_parameters
68	! Output of messages replaced by message handling routine.
69	! Implementation of an MPI-1 coupling: replaced myid with target_id,
70	! deleted __mpi2 directives
71	! Check that PALM is called with mrun -K parallel for coupling
72	!
73	! 197 2008-09-16 15:29:03Z raasch
74	! Bug fix: Construction of vertical profiles when 10 gradients have been
75	! specified in the parameter list (ug, vg, pt, q, sa, lad)
76	!
77	! Strict grid matching along z is not needed for mg-solver.
78	! Leaf area density (LAD) explicitly set to its surface value at k=0
79	! Case of reading data for recycling included in initializing_actions,
80	! check of turbulent_inflow and calculation of recycling_plane.
81	! q*2 profile added
82	!
83	! 138 2007-11-28 10:03:58Z letzel
84	! Plant canopy added
85	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
86	! Multigrid solver allows topography, checking of dt_sort_particles
87	! Bugfix: initializing u_init and v_init in case of ocean runs
88	!
89	! 109 2007-08-28 15:26:47Z letzel
90	! Check coupling_mode and set default (obligatory) values (like boundary
91	! conditions for temperature and fluxes) in case of coupled runs.
92	! +profiles for wp and w"e
93	! Bugfix: Error message concerning output of particle concentration (pc)
94	! modified
95	! More checks and more default values for coupled runs
96	! allow data_output_pr= q, wq, w"q", wq for humidity = .T. (instead of
97	! cloud_physics = .T.)
98	! Rayleigh damping for ocean fixed.
99	! Check and, if necessary, set default value for dt_coupling
100	!
101	! 97 2007-06-21 08:23:15Z raasch
102	! Initial salinity profile is calculated, salinity boundary conditions are
103	! checked,
104	! z_max_do1d is checked only in case of ocean = .f.,
105	! +initial temperature and geostrophic velocity profiles for the ocean version,
106	! use_pt_reference renamed use_reference
107	!
108	! 89 2007-05-25 12:08:31Z raasch
109	! Check for user-defined profiles
110	!
111	! 75 2007-03-22 09:54:05Z raasch
112	! "by_user" allowed as initializing action, -data_output_ts,
113	! leapfrog with non-flat topography not allowed any more, loop_optimization
114	! and pt_reference are checked, moisture renamed humidity,
115	! output of precipitation amount/rate and roughnes length + check
116	! possible negative humidities are avoided in initial profile,
117	! dirichlet/neumann changed to dirichlet/radiation, etc.,
118	! revision added to run_description_header
119	!
120	! 20 2007-02-26 00:12:32Z raasch
121	! Temperature and humidity gradients at top are now calculated for nzt+1,
122	! top_heatflux and respective boundary condition bc_pt_t is checked
123	!
124	! RCS Log replace by Id keyword, revision history cleaned up
125	!
126	! Revision 1.61 2006/08/04 14:20:25 raasch
127	! do2d_unit and do3d_unit now defined as 2d-arrays, check of
128	! use_upstream_for_tke, default value for dt_dopts,
129	! generation of file header moved from routines palm and header to here
130	!
131	! Revision 1.1 1997/08/26 06:29:23 raasch
132	! Initial revision
133	!
134	!
135	! Description:
136	! ------------
137	! Check control parameters and deduce further quantities.
138	!------------------------------------------------------------------------------!
139
140	USE arrays_3d
141	USE constants
142	USE control_parameters
143	USE dvrp_variables
144	USE grid_variables
145	USE indices
146	USE model_1d
147	USE netcdf_control
148	USE particle_attributes
149	USE pegrid
150	USE profil_parameter
151	USE subsidence_mod
152	USE statistics
153	USE transpose_indices
154
155	IMPLICIT NONE
156
157	CHARACTER (LEN=1) :: sq
158	CHARACTER (LEN=6) :: var
159	CHARACTER (LEN=7) :: unit
160	CHARACTER (LEN=8) :: date
161	CHARACTER (LEN=10) :: time
162	CHARACTER (LEN=40) :: coupling_string
163	CHARACTER (LEN=100) :: action
164
165	INTEGER :: i, ilen, intervals, iremote = 0, iter, j, k, nnxh, nnyh, &
166	position, prec
167	LOGICAL :: found, ldum
168	REAL :: gradient, maxn, maxp, remote = 0.0, &
169	simulation_time_since_reference
170
171	!
172	!-- Warning, if host is not set
173	IF ( host(1:1) == ' ' ) THEN
174	message_string = '"host" is not set. Please check that environment ' // &
175	'variable "localhost" & is set before running PALM'
176	CALL message( 'check_parameters', 'PA0001', 0, 0, 0, 6, 0 )
177	ENDIF
178
179	!
180	!-- Check the coupling mode
181	IF ( coupling_mode /= 'uncoupled' .AND. &
182	coupling_mode /= 'atmosphere_to_ocean' .AND. &
183	coupling_mode /= 'ocean_to_atmosphere' ) THEN
184	message_string = 'illegal coupling mode: ' // TRIM( coupling_mode )
185	CALL message( 'check_parameters', 'PA0002', 1, 2, 0, 6, 0 )
186	ENDIF
187
188	!
189	!-- Check dt_coupling, restart_time, dt_restart, end_time, dx, dy, nx and ny
190	IF ( coupling_mode /= 'uncoupled') THEN
191
192	IF ( dt_coupling == 9999999.9 ) THEN
193	message_string = 'dt_coupling is not set but required for coup' // &
194	'ling mode "' // TRIM( coupling_mode ) // '"'
195	CALL message( 'check_parameters', 'PA0003', 1, 2, 0, 6, 0 )
196	ENDIF
197
198	#if defined( __parallel )
199	IF ( myid == 0 ) THEN
200	CALL MPI_SEND( dt_coupling, 1, MPI_REAL, target_id, 11, comm_inter, &
201	ierr )
202	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 11, comm_inter, &
203	status, ierr )
204	ENDIF
205	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
206
207	IF ( dt_coupling /= remote ) THEN
208	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
209	'": dt_coupling = ', dt_coupling, '& is not equal to ', &
210	'dt_coupling_remote = ', remote
211	CALL message( 'check_parameters', 'PA0004', 1, 2, 0, 6, 0 )
212	ENDIF
213	IF ( dt_coupling <= 0.0 ) THEN
214	IF ( myid == 0 ) THEN
215	CALL MPI_SEND( dt_max, 1, MPI_REAL, target_id, 19, comm_inter, ierr )
216	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 19, comm_inter, &
217	status, ierr )
218	ENDIF
219	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
220
221	dt_coupling = MAX( dt_max, remote )
222	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
223	'": dt_coupling <= 0.0 & is not allowed and is reset to ', &
224	'MAX(dt_max(A,O)) = ', dt_coupling
225	CALL message( 'check_parameters', 'PA0005', 0, 1, 0, 6, 0 )
226	ENDIF
227	IF ( myid == 0 ) THEN
228	CALL MPI_SEND( restart_time, 1, MPI_REAL, target_id, 12, comm_inter, &
229	ierr )
230	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 12, comm_inter, &
231	status, ierr )
232	ENDIF
233	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
234
235	IF ( restart_time /= remote ) THEN
236	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
237	'": restart_time = ', restart_time, '& is not equal to ', &
238	'restart_time_remote = ', remote
239	CALL message( 'check_parameters', 'PA0006', 1, 2, 0, 6, 0 )
240	ENDIF
241	IF ( myid == 0 ) THEN
242	CALL MPI_SEND( dt_restart, 1, MPI_REAL, target_id, 13, comm_inter, &
243	ierr )
244	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 13, comm_inter, &
245	status, ierr )
246	ENDIF
247	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
248
249	IF ( dt_restart /= remote ) THEN
250	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
251	'": dt_restart = ', dt_restart, '& is not equal to ', &
252	'dt_restart_remote = ', remote
253	CALL message( 'check_parameters', 'PA0007', 1, 2, 0, 6, 0 )
254	ENDIF
255
256	simulation_time_since_reference = end_time - coupling_start_time
257	IF ( myid == 0 ) THEN
258	CALL MPI_SEND( simulation_time_since_reference, 1, MPI_REAL, target_id, &
259	14, comm_inter, ierr )
260	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 14, comm_inter, &
261	status, ierr )
262	ENDIF
263	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
264
265	IF ( simulation_time_since_reference /= remote ) THEN
266	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
267	'": simulation_time_since_reference = ', &
268	simulation_time_since_reference, '& is not equal to ', &
269	'simulation_time_since_reference_remote = ', remote
270	CALL message( 'check_parameters', 'PA0008', 1, 2, 0, 6, 0 )
271	ENDIF
272
273
274	IF ( myid == 0 ) THEN
275	CALL MPI_SEND( dx, 1, MPI_REAL, target_id, 15, comm_inter, ierr )
276	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 15, comm_inter, &
277	status, ierr )
278	ENDIF
279	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
280
281
282	IF ( coupling_mode == 'atmosphere_to_ocean') THEN
283
284	IF ( dx < remote ) THEN
285	WRITE( message_string, * ) 'coupling mode "', &
286	TRIM( coupling_mode ), &
287	'": dx in Atmosphere is not equal to or not larger then dx in ocean'
288	CALL message( 'check_parameters', 'PA0009', 1, 2, 0, 6, 0 )
289	ENDIF
290
291	IF ( (nx_a+1)dx /= (nx_o+1)remote ) THEN
292	WRITE( message_string, * ) 'coupling mode "', &
293	TRIM( coupling_mode ), &
294	'": Domain size in x-direction is not equal in ocean and atmosphere'
295	CALL message( 'check_parameters', 'PA0010', 1, 2, 0, 6, 0 )
296	ENDIF
297
298	ENDIF
299
300	IF ( myid == 0) THEN
301	CALL MPI_SEND( dy, 1, MPI_REAL, target_id, 16, comm_inter, ierr )
302	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 16, comm_inter, &
303	status, ierr )
304	ENDIF
305	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
306
307	IF ( coupling_mode == 'atmosphere_to_ocean') THEN
308
309	IF ( dy < remote ) THEN
310	WRITE( message_string, * ) 'coupling mode "', &
311	TRIM( coupling_mode ), &
312	'": dy in Atmosphere is not equal to or not larger then dy in ocean'
313	CALL message( 'check_parameters', 'PA0011', 1, 2, 0, 6, 0 )
314	ENDIF
315
316	IF ( (ny_a+1)dy /= (ny_o+1)remote ) THEN
317	WRITE( message_string, * ) 'coupling mode "', &
318	TRIM( coupling_mode ), &
319	'": Domain size in y-direction is not equal in ocean and atmosphere'
320	CALL message( 'check_parameters', 'PA0012', 1, 2, 0, 6, 0 )
321	ENDIF
322
323	IF ( MOD(nx_o+1,nx_a+1) /= 0 ) THEN
324	WRITE( message_string, * ) 'coupling mode "', &
325	TRIM( coupling_mode ), &
326	'": nx+1 in ocean is not divisible without remainder with nx+1 in', &
327	' atmosphere'
328	CALL message( 'check_parameters', 'PA0339', 1, 2, 0, 6, 0 )
329	ENDIF
330
331	IF ( MOD(ny_o+1,ny_a+1) /= 0 ) THEN
332	WRITE( message_string, * ) 'coupling mode "', &
333	TRIM( coupling_mode ), &
334	'": ny+1 in ocean is not divisible without remainder with ny+1 in', &
335	' atmosphere'
336	CALL message( 'check_parameters', 'PA0340', 1, 2, 0, 6, 0 )
337	ENDIF
338
339	ENDIF
340	#else
341	WRITE( message_string, * ) 'coupling requires PALM to be called with', &
342	' ''mrun -K parallel'''
343	CALL message( 'check_parameters', 'PA0141', 1, 2, 0, 6, 0 )
344	#endif
345	ENDIF
346
347	#if defined( __parallel )
348	!
349	!-- Exchange via intercommunicator
350	IF ( coupling_mode == 'atmosphere_to_ocean' .AND. myid == 0 ) THEN
351	CALL MPI_SEND( humidity, 1, MPI_LOGICAL, target_id, 19, comm_inter, &
352	ierr )
353	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' .AND. myid == 0) THEN
354	CALL MPI_RECV( humidity_remote, 1, MPI_LOGICAL, target_id, 19, &
355	comm_inter, status, ierr )
356	ENDIF
357	CALL MPI_BCAST( humidity_remote, 1, MPI_LOGICAL, 0, comm2d, ierr)
358
359	#endif
360
361
362	!
363	!-- Generate the file header which is used as a header for most of PALM's
364	!-- output files
365	CALL DATE_AND_TIME( date, time )
366	run_date = date(7:8)//'-'//date(5:6)//'-'//date(3:4)
367	run_time = time(1:2)//':'//time(3:4)//':'//time(5:6)
368	IF ( coupling_mode == 'uncoupled' ) THEN
369	coupling_string = ''
370	ELSEIF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
371	coupling_string = ' coupled (atmosphere)'
372	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
373	coupling_string = ' coupled (ocean)'
374	ENDIF
375
376	WRITE ( run_description_header, &
377	'(A,2X,A,2X,A,A,A,I2.2,A,2X,A,A,2X,A,1X,A)' ) &
378	TRIM( version ), TRIM( revision ), 'run: ', &
379	TRIM( run_identifier ), '.', runnr, TRIM( coupling_string ), &
380	'host: ', TRIM( host ), run_date, run_time
381
382	!
383	!-- Check the general loop optimization method
384	IF ( loop_optimization == 'default' ) THEN
385	IF ( host(1:3) == 'nec' ) THEN
386	loop_optimization = 'vector'
387	ELSE
388	loop_optimization = 'cache'
389	ENDIF
390	ENDIF
391	IF ( loop_optimization /= 'noopt' .AND. loop_optimization /= 'cache' &
392	.AND. loop_optimization /= 'vector' ) THEN
393	message_string = 'illegal value given for loop_optimization: "' // &
394	TRIM( loop_optimization ) // '"'
395	CALL message( 'check_parameters', 'PA0013', 1, 2, 0, 6, 0 )
396	ENDIF
397
398	!
399	!-- Check topography setting (check for illegal parameter combinations)
400	IF ( topography /= 'flat' ) THEN
401	action = ' '
402	IF ( scalar_advec /= 'pw-scheme' ) THEN
403	WRITE( action, '(A,A)' ) 'scalar_advec = ', scalar_advec
404	ENDIF
405	IF ( momentum_advec /= 'pw-scheme' ) THEN
406	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
407	ENDIF
408	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
409	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
410	ENDIF
411	IF ( psolver == 'sor' ) THEN
412	WRITE( action, '(A,A)' ) 'psolver = ', psolver
413	ENDIF
414	IF ( sloping_surface ) THEN
415	WRITE( action, '(A)' ) 'sloping surface = .TRUE.'
416	ENDIF
417	IF ( galilei_transformation ) THEN
418	WRITE( action, '(A)' ) 'galilei_transformation = .TRUE.'
419	ENDIF
420	IF ( cloud_physics ) THEN
421	WRITE( action, '(A)' ) 'cloud_physics = .TRUE.'
422	ENDIF
423	IF ( cloud_droplets ) THEN
424	WRITE( action, '(A)' ) 'cloud_droplets = .TRUE.'
425	ENDIF
426	IF ( .NOT. prandtl_layer ) THEN
427	WRITE( action, '(A)' ) 'prandtl_layer = .FALSE.'
428	ENDIF
429	IF ( action /= ' ' ) THEN
430	message_string = 'a non-flat topography does not allow ' // &
431	TRIM( action )
432	CALL message( 'check_parameters', 'PA0014', 1, 2, 0, 6, 0 )
433	ENDIF
434	IF ( momentum_advec == 'ws-scheme' .OR. scalar_advec == 'ws-scheme' ) &
435	THEN
436	message_string = 'topography is still not allowed with ' // &
437	'momentum_advec = "' // TRIM( momentum_advec ) // &
438	'"or scalar_advec = "' // TRIM( scalar_advec ) //'"'
439	! message number still needs modification
440	CALL message( 'check_parameters', 'PA0341', 1, 2, 0, 6, 0 )
441	END IF
442
443	!
444	!-- In case of non-flat topography, check whether the convention how to
445	!-- define the topography grid has been set correctly, or whether the default
446	!-- is applicable. If this is not possible, abort.
447	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
448	IF ( TRIM( topography ) /= 'single_building' .AND. &
449	TRIM( topography ) /= 'single_street_canyon' .AND. &
450	TRIM( topography ) /= 'read_from_file' ) THEN
451	!-- The default value is not applicable here, because it is only valid
452	!-- for the two standard cases 'single_building' and 'read_from_file'
453	!-- defined in init_grid.
454	WRITE( message_string, * ) &
455	'The value for "topography_grid_convention" ', &
456	'is not set. Its default value is & only valid for ', &
457	'"topography" = ''single_building'', ', &
458	'''single_street_canyon'' & or ''read_from_file''.', &
459	' & Choose ''cell_edge'' or ''cell_center''.'
460	CALL message( 'user_check_parameters', 'PA0239', 1, 2, 0, 6, 0 )
461	ELSE
462	!-- The default value is applicable here.
463	!-- Set convention according to topography.
464	IF ( TRIM( topography ) == 'single_building' .OR. &
465	TRIM( topography ) == 'single_street_canyon' ) THEN
466	topography_grid_convention = 'cell_edge'
467	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
468	topography_grid_convention = 'cell_center'
469	ENDIF
470	ENDIF
471	ELSEIF ( TRIM( topography_grid_convention ) /= 'cell_edge' .AND. &
472	TRIM( topography_grid_convention ) /= 'cell_center' ) THEN
473	WRITE( message_string, * ) &
474	'The value for "topography_grid_convention" is ', &
475	'not recognized. & Choose ''cell_edge'' or ''cell_center''.'
476	CALL message( 'user_check_parameters', 'PA0240', 1, 2, 0, 6, 0 )
477	ENDIF
478
479	ENDIF
480
481	!
482	!-- Check ocean setting
483	IF ( ocean ) THEN
484
485	action = ' '
486	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
487	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
488	ENDIF
489	IF ( momentum_advec == 'ups-scheme' ) THEN
490	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
491	ENDIF
492	IF ( action /= ' ' ) THEN
493	message_string = 'ocean = .T. does not allow ' // TRIM( action )
494	CALL message( 'check_parameters', 'PA0015', 1, 2, 0, 6, 0 )
495	ENDIF
496
497	ELSEIF ( TRIM( coupling_mode ) == 'uncoupled' .AND. &
498	TRIM( coupling_char ) == '_O' ) THEN
499
500	!
501	!-- Check whether an (uncoupled) atmospheric run has been declared as an
502	!-- ocean run (this setting is done via mrun-option -y)
503
504	message_string = 'ocean = .F. does not allow coupling_char = "' // &
505	TRIM( coupling_char ) // '" set by mrun-option "-y"'
506	CALL message( 'check_parameters', 'PA0317', 1, 2, 0, 6, 0 )
507
508	ENDIF
509
510	!
511	!-- Check whether there are any illegal values
512	!-- Pressure solver:
513	IF ( psolver /= 'poisfft' .AND. psolver /= 'poisfft_hybrid' .AND. &
514	psolver /= 'sor' .AND. psolver /= 'multigrid' ) THEN
515	message_string = 'unknown solver for perturbation pressure: psolver' // &
516	' = "' // TRIM( psolver ) // '"'
517	CALL message( 'check_parameters', 'PA0016', 1, 2, 0, 6, 0 )
518	ENDIF
519
520	#if defined( __parallel )
521	IF ( psolver == 'poisfft_hybrid' .AND. pdims(2) /= 1 ) THEN
522	message_string = 'psolver = "' // TRIM( psolver ) // '" only works ' // &
523	'for a 1d domain-decomposition along x & please do' // &
524	' not set npey/=1 in the parameter file'
525	CALL message( 'check_parameters', 'PA0017', 1, 2, 0, 6, 0 )
526	ENDIF
527	IF ( psolver == 'poisfft_hybrid' .AND. &
528	( nxra > nxr .OR. nyna > nyn .OR. nza > nz ) .OR. &
529	psolver == 'multigrid' .AND. &
530	( nxra > nxr .OR. nyna > nyn ) ) THEN
531	message_string = 'psolver = "' // TRIM( psolver ) // '" does not ' // &
532	'work for subdomains with unequal size & please ' // &
533	'set grid_matching = ''strict'' in the parameter file'
534	CALL message( 'check_parameters', 'PA0018', 1, 2, 0, 6, 0 )
535	ENDIF
536	#else
537	IF ( psolver == 'poisfft_hybrid' ) THEN
538	message_string = 'psolver = "' // TRIM( psolver ) // '" only works' // &
539	' for a parallel environment'
540	CALL message( 'check_parameters', 'PA0019', 1, 2, 0, 6, 0 )
541	ENDIF
542	#endif
543
544	IF ( psolver == 'multigrid' ) THEN
545	IF ( cycle_mg == 'w' ) THEN
546	gamma_mg = 2
547	ELSEIF ( cycle_mg == 'v' ) THEN
548	gamma_mg = 1
549	ELSE
550	message_string = 'unknown multigrid cycle: cycle_mg = "' // &
551	TRIM( cycle_mg ) // '"'
552	CALL message( 'check_parameters', 'PA0020', 1, 2, 0, 6, 0 )
553	ENDIF
554	ENDIF
555
556	IF ( fft_method /= 'singleton-algorithm' .AND. &
557	fft_method /= 'temperton-algorithm' .AND. &
558	fft_method /= 'system-specific' ) THEN
559	message_string = 'unknown fft-algorithm: fft_method = "' // &
560	TRIM( fft_method ) // '"'
561	CALL message( 'check_parameters', 'PA0021', 1, 2, 0, 6, 0 )
562	ENDIF
563
564	IF( momentum_advec == 'ws-scheme' .AND. &
565	call_psolver_at_all_substeps == .FALSE. ) THEN
566	message_string = 'psolver must be called at each RK3 substep when "'//&
567	TRIM(momentum_advec) // ' "is used for momentum_advec'
568	CALL message( 'check_parameters', 'PA0343', 1, 2, 0, 6, 0 )
569	END IF
570	!
571	!-- Advection schemes:
572	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme' .AND. &
573	momentum_advec /= 'ups-scheme' ) THEN
574	message_string = 'unknown advection scheme: momentum_advec = "' // &
575	TRIM( momentum_advec ) // '"'
576	CALL message( 'check_parameters', 'PA0022', 1, 2, 0, 6, 0 )
577	ENDIF
578	IF ((( momentum_advec == 'ups-scheme' .OR. scalar_advec == 'ups-scheme' )&
579	.AND. timestep_scheme /= 'euler' ) .OR. (( momentum_advec == 'ws-scheme'&
580	.OR. scalar_advec == 'ws-scheme') .AND. (timestep_scheme == 'euler' .OR. &
581	timestep_scheme == 'leapfrog+euler' .OR. timestep_scheme == 'leapfrog' &
582	.OR. timestep_scheme == 'runge-kutta-2'))) THEN
583	message_string = 'momentum_advec or scalar_advec = "' &
584	// TRIM( momentum_advec ) // '" is not allowed with timestep_scheme = "' // &
585	TRIM( timestep_scheme ) // '"'
586	CALL message( 'check_parameters', 'PA0023', 1, 2, 0, 6, 0 )
587	ENDIF
588	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'ws-scheme' .AND. &
589	scalar_advec /= 'bc-scheme' .AND. scalar_advec /= 'ups-scheme' ) THEN
590	message_string = 'unknown advection scheme: scalar_advec = "' // &
591	TRIM( scalar_advec ) // '"'
592	CALL message( 'check_parameters', 'PA0024', 1, 2, 0, 6, 0 )
593	ENDIF
594
595	IF ( use_sgs_for_particles .AND. .NOT. use_upstream_for_tke ) THEN
596	use_upstream_for_tke = .TRUE.
597	message_string = 'use_upstream_for_tke set .TRUE. because ' // &
598	'use_sgs_for_particles = .TRUE.'
599	CALL message( 'check_parameters', 'PA0025', 0, 1, 0, 6, 0 )
600	ENDIF
601
602	IF ( use_upstream_for_tke .AND. timestep_scheme(1:8) == 'leapfrog' ) THEN
603	message_string = 'use_upstream_for_tke = .TRUE. not allowed with ' // &
604	'timestep_scheme = "' // TRIM( timestep_scheme ) // '"'
605	CALL message( 'check_parameters', 'PA0026', 1, 2, 0, 6, 0 )
606	ENDIF
607
608	!
609	!-- Timestep schemes:
610	SELECT CASE ( TRIM( timestep_scheme ) )
611
612	CASE ( 'euler' )
613	intermediate_timestep_count_max = 1
614	asselin_filter_factor = 0.0
615
616	CASE ( 'leapfrog', 'leapfrog+euler' )
617	intermediate_timestep_count_max = 1
618
619	CASE ( 'runge-kutta-2' )
620	intermediate_timestep_count_max = 2
621	asselin_filter_factor = 0.0
622
623	CASE ( 'runge-kutta-3' )
624	intermediate_timestep_count_max = 3
625	asselin_filter_factor = 0.0
626
627	CASE DEFAULT
628	message_string = 'unknown timestep scheme: timestep_scheme = "' // &
629	TRIM( timestep_scheme ) // '"'
630	CALL message( 'check_parameters', 'PA0027', 1, 2, 0, 6, 0 )
631
632	END SELECT
633
634	IF ( scalar_advec == 'ups-scheme' .AND. timestep_scheme(1:5) == 'runge' )&
635	THEN
636	message_string = 'scalar advection scheme "' // TRIM( scalar_advec ) // &
637	'" & does not work with timestep_scheme "' // &
638	TRIM( timestep_scheme ) // '"'
639	CALL message( 'check_parameters', 'PA0028', 1, 2, 0, 6, 0 )
640	ENDIF
641
642	IF ( (momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme') &
643	.AND. timestep_scheme(1:5) == 'runge' ) THEN
644	message_string = 'momentum advection scheme "' // &
645	TRIM( momentum_advec ) // '" & does not work with ' // &
646	'timestep_scheme "' // TRIM( timestep_scheme ) // '"'
647	CALL message( 'check_parameters', 'PA0029', 1, 2, 0, 6, 0 )
648	ENDIF
649
650	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
651	TRIM( initializing_actions ) /= 'cyclic_fill' ) THEN
652	!
653	!-- No restart run: several initialising actions are possible
654	action = initializing_actions
655	DO WHILE ( TRIM( action ) /= '' )
656	position = INDEX( action, ' ' )
657	SELECT CASE ( action(1:position-1) )
658
659	CASE ( 'set_constant_profiles', 'set_1d-model_profiles', &
660	'by_user', 'initialize_vortex', 'initialize_ptanom' )
661	action = action(position+1:)
662
663	CASE DEFAULT
664	message_string = 'initializing_action = "' // &
665	TRIM( action ) // '" unkown or not allowed'
666	CALL message( 'check_parameters', 'PA0030', 1, 2, 0, 6, 0 )
667
668	END SELECT
669	ENDDO
670	ENDIF
671
672	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
673	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
674	message_string = 'initializing_actions = "set_constant_profiles"' // &
675	' and "set_1d-model_profiles" are not allowed ' // &
676	'simultaneously'
677	CALL message( 'check_parameters', 'PA0031', 1, 2, 0, 6, 0 )
678	ENDIF
679
680	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
681	INDEX( initializing_actions, 'by_user' ) /= 0 ) THEN
682	message_string = 'initializing_actions = "set_constant_profiles"' // &
683	' and "by_user" are not allowed simultaneously'
684	CALL message( 'check_parameters', 'PA0032', 1, 2, 0, 6, 0 )
685	ENDIF
686
687	IF ( INDEX( initializing_actions, 'by_user' ) /= 0 .AND. &
688	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
689	message_string = 'initializing_actions = "by_user" and ' // &
690	'"set_1d-model_profiles" are not allowed simultaneously'
691	CALL message( 'check_parameters', 'PA0033', 1, 2, 0, 6, 0 )
692	ENDIF
693
694	IF ( cloud_physics .AND. .NOT. humidity ) THEN
695	WRITE( message_string, * ) 'cloud_physics = ', cloud_physics, ' is ', &
696	'not allowed with humidity = ', humidity
697	CALL message( 'check_parameters', 'PA0034', 1, 2, 0, 6, 0 )
698	ENDIF
699
700	IF ( precipitation .AND. .NOT. cloud_physics ) THEN
701	WRITE( message_string, * ) 'precipitation = ', precipitation, ' is ', &
702	'not allowed with cloud_physics = ', cloud_physics
703	CALL message( 'check_parameters', 'PA0035', 1, 2, 0, 6, 0 )
704	ENDIF
705
706	IF ( humidity .AND. sloping_surface ) THEN
707	message_string = 'humidity = .TRUE. and sloping_surface = .TRUE. ' // &
708	'are not allowed simultaneously'
709	CALL message( 'check_parameters', 'PA0036', 1, 2, 0, 6, 0 )
710	ENDIF
711
712	IF ( humidity .AND. scalar_advec == 'ups-scheme' ) THEN
713	message_string = 'UPS-scheme is not implemented for humidity = .TRUE.'
714	CALL message( 'check_parameters', 'PA0037', 1, 2, 0, 6, 0 )
715	ENDIF
716
717	IF ( passive_scalar .AND. humidity ) THEN
718	message_string = 'humidity = .TRUE. and passive_scalar = .TRUE. ' // &
719	'is not allowed simultaneously'
720	CALL message( 'check_parameters', 'PA0038', 1, 2, 0, 6, 0 )
721	ENDIF
722
723	IF ( passive_scalar .AND. scalar_advec == 'ups-scheme' ) THEN
724	message_string = 'UPS-scheme is not implemented for passive_scalar' // &
725	' = .TRUE.'
726	CALL message( 'check_parameters', 'PA0039', 1, 2, 0, 6, 0 )
727	ENDIF
728
729	IF ( grid_matching /= 'strict' .AND. grid_matching /= 'match' ) THEN
730	message_string = 'illegal value "' // TRIM( grid_matching ) // &
731	'" found for parameter grid_matching'
732	CALL message( 'check_parameters', 'PA0040', 1, 2, 0, 6, 0 )
733	ENDIF
734
735	IF ( plant_canopy .AND. ( drag_coefficient == 0.0 ) ) THEN
736	message_string = 'plant_canopy = .TRUE. requires a non-zero drag ' // &
737	'coefficient & given value is drag_coefficient = 0.0'
738	CALL message( 'check_parameters', 'PA0041', 1, 2, 0, 6, 0 )
739	ENDIF
740
741	!
742	!-- In case of no model continuation run, check initialising parameters and
743	!-- deduce further quantities
744	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
745
746	!
747	!-- Initial profiles for 1D and 3D model, respectively
748	u_init = ug_surface
749	v_init = vg_surface
750	pt_init = pt_surface
751	IF ( humidity ) q_init = q_surface
752	IF ( ocean ) sa_init = sa_surface
753	IF ( passive_scalar ) q_init = s_surface
754	IF ( plant_canopy ) lad = 0.0
755
756	!
757	!--
758	!-- If required, compute initial profile of the geostrophic wind
759	!-- (component ug)
760	i = 1
761	gradient = 0.0
762
763	IF ( .NOT. ocean ) THEN
764
765	ug_vertical_gradient_level_ind(1) = 0
766	ug(0) = ug_surface
767	DO k = 1, nzt+1
768	IF ( i < 11 ) THEN
769	IF ( ug_vertical_gradient_level(i) < zu(k) .AND. &
770	ug_vertical_gradient_level(i) >= 0.0 ) THEN
771	gradient = ug_vertical_gradient(i) / 100.0
772	ug_vertical_gradient_level_ind(i) = k - 1
773	i = i + 1
774	ENDIF
775	ENDIF
776	IF ( gradient /= 0.0 ) THEN
777	IF ( k /= 1 ) THEN
778	ug(k) = ug(k-1) + dzu(k) * gradient
779	ELSE
780	ug(k) = ug_surface + 0.5 * dzu(k) * gradient
781	ENDIF
782	ELSE
783	ug(k) = ug(k-1)
784	ENDIF
785	ENDDO
786
787	ELSE
788
789	ug_vertical_gradient_level_ind(1) = nzt+1
790	ug(nzt+1) = ug_surface
791	DO k = nzt, nzb, -1
792	IF ( i < 11 ) THEN
793	IF ( ug_vertical_gradient_level(i) > zu(k) .AND. &
794	ug_vertical_gradient_level(i) <= 0.0 ) THEN
795	gradient = ug_vertical_gradient(i) / 100.0
796	ug_vertical_gradient_level_ind(i) = k + 1
797	i = i + 1
798	ENDIF
799	ENDIF
800	IF ( gradient /= 0.0 ) THEN
801	IF ( k /= nzt ) THEN
802	ug(k) = ug(k+1) - dzu(k+1) * gradient
803	ELSE
804	ug(k) = ug_surface - 0.5 * dzu(k+1) * gradient
805	ug(k+1) = ug_surface + 0.5 * dzu(k+1) * gradient
806	ENDIF
807	ELSE
808	ug(k) = ug(k+1)
809	ENDIF
810	ENDDO
811
812	ENDIF
813
814	u_init = ug
815
816	!
817	!-- In case of no given gradients for ug, choose a vanishing gradient
818	IF ( ug_vertical_gradient_level(1) == -9999999.9 ) THEN
819	ug_vertical_gradient_level(1) = 0.0
820	ENDIF
821
822	!
823	!--
824	!-- If required, compute initial profile of the geostrophic wind
825	!-- (component vg)
826	i = 1
827	gradient = 0.0
828
829	IF ( .NOT. ocean ) THEN
830
831	vg_vertical_gradient_level_ind(1) = 0
832	vg(0) = vg_surface
833	DO k = 1, nzt+1
834	IF ( i < 11 ) THEN
835	IF ( vg_vertical_gradient_level(i) < zu(k) .AND. &
836	vg_vertical_gradient_level(i) >= 0.0 ) THEN
837	gradient = vg_vertical_gradient(i) / 100.0
838	vg_vertical_gradient_level_ind(i) = k - 1
839	i = i + 1
840	ENDIF
841	ENDIF
842	IF ( gradient /= 0.0 ) THEN
843	IF ( k /= 1 ) THEN
844	vg(k) = vg(k-1) + dzu(k) * gradient
845	ELSE
846	vg(k) = vg_surface + 0.5 * dzu(k) * gradient
847	ENDIF
848	ELSE
849	vg(k) = vg(k-1)
850	ENDIF
851	ENDDO
852
853	ELSE
854
855	vg_vertical_gradient_level_ind(1) = nzt+1
856	vg(nzt+1) = vg_surface
857	DO k = nzt, nzb, -1
858	IF ( i < 11 ) THEN
859	IF ( vg_vertical_gradient_level(i) > zu(k) .AND. &
860	vg_vertical_gradient_level(i) <= 0.0 ) THEN
861	gradient = vg_vertical_gradient(i) / 100.0
862	vg_vertical_gradient_level_ind(i) = k + 1
863	i = i + 1
864	ENDIF
865	ENDIF
866	IF ( gradient /= 0.0 ) THEN
867	IF ( k /= nzt ) THEN
868	vg(k) = vg(k+1) - dzu(k+1) * gradient
869	ELSE
870	vg(k) = vg_surface - 0.5 * dzu(k+1) * gradient
871	vg(k+1) = vg_surface + 0.5 * dzu(k+1) * gradient
872	ENDIF
873	ELSE
874	vg(k) = vg(k+1)
875	ENDIF
876	ENDDO
877
878	ENDIF
879
880	v_init = vg
881
882	!
883	!-- In case of no given gradients for vg, choose a vanishing gradient
884	IF ( vg_vertical_gradient_level(1) == -9999999.9 ) THEN
885	vg_vertical_gradient_level(1) = 0.0
886	ENDIF
887
888	!
889	!-- Compute initial temperature profile using the given temperature gradients
890	i = 1
891	gradient = 0.0
892
893	IF ( .NOT. ocean ) THEN
894
895	pt_vertical_gradient_level_ind(1) = 0
896	DO k = 1, nzt+1
897	IF ( i < 11 ) THEN
898	IF ( pt_vertical_gradient_level(i) < zu(k) .AND. &
899	pt_vertical_gradient_level(i) >= 0.0 ) THEN
900	gradient = pt_vertical_gradient(i) / 100.0
901	pt_vertical_gradient_level_ind(i) = k - 1
902	i = i + 1
903	ENDIF
904	ENDIF
905	IF ( gradient /= 0.0 ) THEN
906	IF ( k /= 1 ) THEN
907	pt_init(k) = pt_init(k-1) + dzu(k) * gradient
908	ELSE
909	pt_init(k) = pt_surface + 0.5 * dzu(k) * gradient
910	ENDIF
911	ELSE
912	pt_init(k) = pt_init(k-1)
913	ENDIF
914	ENDDO
915
916	ELSE
917
918	pt_vertical_gradient_level_ind(1) = nzt+1
919	DO k = nzt, 0, -1
920	IF ( i < 11 ) THEN
921	IF ( pt_vertical_gradient_level(i) > zu(k) .AND. &
922	pt_vertical_gradient_level(i) <= 0.0 ) THEN
923	gradient = pt_vertical_gradient(i) / 100.0
924	pt_vertical_gradient_level_ind(i) = k + 1
925	i = i + 1
926	ENDIF
927	ENDIF
928	IF ( gradient /= 0.0 ) THEN
929	IF ( k /= nzt ) THEN
930	pt_init(k) = pt_init(k+1) - dzu(k+1) * gradient
931	ELSE
932	pt_init(k) = pt_surface - 0.5 * dzu(k+1) * gradient
933	pt_init(k+1) = pt_surface + 0.5 * dzu(k+1) * gradient
934	ENDIF
935	ELSE
936	pt_init(k) = pt_init(k+1)
937	ENDIF
938	ENDDO
939
940	ENDIF
941
942	!
943	!-- In case of no given temperature gradients, choose gradient of neutral
944	!-- stratification
945	IF ( pt_vertical_gradient_level(1) == -9999999.9 ) THEN
946	pt_vertical_gradient_level(1) = 0.0
947	ENDIF
948
949	!
950	!-- Store temperature gradient at the top boundary for possible Neumann
951	!-- boundary condition
952	bc_pt_t_val = ( pt_init(nzt+1) - pt_init(nzt) ) / dzu(nzt+1)
953
954	!
955	!-- If required, compute initial humidity or scalar profile using the given
956	!-- humidity/scalar gradient. In case of scalar transport, initially store
957	!-- values of the scalar parameters on humidity parameters
958	IF ( passive_scalar ) THEN
959	bc_q_b = bc_s_b
960	bc_q_t = bc_s_t
961	q_surface = s_surface
962	q_surface_initial_change = s_surface_initial_change
963	q_vertical_gradient = s_vertical_gradient
964	q_vertical_gradient_level = s_vertical_gradient_level
965	surface_waterflux = surface_scalarflux
966	wall_humidityflux = wall_scalarflux
967	ENDIF
968
969	IF ( humidity .OR. passive_scalar ) THEN
970
971	i = 1
972	gradient = 0.0
973	q_vertical_gradient_level_ind(1) = 0
974	DO k = 1, nzt+1
975	IF ( i < 11 ) THEN
976	IF ( q_vertical_gradient_level(i) < zu(k) .AND. &
977	q_vertical_gradient_level(i) >= 0.0 ) THEN
978	gradient = q_vertical_gradient(i) / 100.0
979	q_vertical_gradient_level_ind(i) = k - 1
980	i = i + 1
981	ENDIF
982	ENDIF
983	IF ( gradient /= 0.0 ) THEN
984	IF ( k /= 1 ) THEN
985	q_init(k) = q_init(k-1) + dzu(k) * gradient
986	ELSE
987	q_init(k) = q_init(k-1) + 0.5 * dzu(k) * gradient
988	ENDIF
989	ELSE
990	q_init(k) = q_init(k-1)
991	ENDIF
992	!
993	!-- Avoid negative humidities
994	IF ( q_init(k) < 0.0 ) THEN
995	q_init(k) = 0.0
996	ENDIF
997	ENDDO
998
999	!
1000	!-- In case of no given humidity gradients, choose zero gradient
1001	!-- conditions
1002	IF ( q_vertical_gradient_level(1) == -1.0 ) THEN
1003	q_vertical_gradient_level(1) = 0.0
1004	ENDIF
1005
1006	!
1007	!-- Store humidity gradient at the top boundary for possile Neumann
1008	!-- boundary condition
1009	bc_q_t_val = ( q_init(nzt+1) - q_init(nzt) ) / dzu(nzt+1)
1010
1011	ENDIF
1012
1013	!
1014	!-- If required, compute initial salinity profile using the given salinity
1015	!-- gradients
1016	IF ( ocean ) THEN
1017
1018	i = 1
1019	gradient = 0.0
1020
1021	sa_vertical_gradient_level_ind(1) = nzt+1
1022	DO k = nzt, 0, -1
1023	IF ( i < 11 ) THEN
1024	IF ( sa_vertical_gradient_level(i) > zu(k) .AND. &
1025	sa_vertical_gradient_level(i) <= 0.0 ) THEN
1026	gradient = sa_vertical_gradient(i) / 100.0
1027	sa_vertical_gradient_level_ind(i) = k + 1
1028	i = i + 1
1029	ENDIF
1030	ENDIF
1031	IF ( gradient /= 0.0 ) THEN
1032	IF ( k /= nzt ) THEN
1033	sa_init(k) = sa_init(k+1) - dzu(k+1) * gradient
1034	ELSE
1035	sa_init(k) = sa_surface - 0.5 * dzu(k+1) * gradient
1036	sa_init(k+1) = sa_surface + 0.5 * dzu(k+1) * gradient
1037	ENDIF
1038	ELSE
1039	sa_init(k) = sa_init(k+1)
1040	ENDIF
1041	ENDDO
1042
1043	ENDIF
1044
1045	!
1046	!-- If required compute the profile of leaf area density used in the plant
1047	!-- canopy model
1048	IF ( plant_canopy ) THEN
1049
1050	i = 1
1051	gradient = 0.0
1052
1053	IF ( .NOT. ocean ) THEN
1054
1055	lad(0) = lad_surface
1056
1057	lad_vertical_gradient_level_ind(1) = 0
1058	DO k = 1, pch_index
1059	IF ( i < 11 ) THEN
1060	IF ( lad_vertical_gradient_level(i) < zu(k) .AND. &
1061	lad_vertical_gradient_level(i) >= 0.0 ) THEN
1062	gradient = lad_vertical_gradient(i)
1063	lad_vertical_gradient_level_ind(i) = k - 1
1064	i = i + 1
1065	ENDIF
1066	ENDIF
1067	IF ( gradient /= 0.0 ) THEN
1068	IF ( k /= 1 ) THEN
1069	lad(k) = lad(k-1) + dzu(k) * gradient
1070	ELSE
1071	lad(k) = lad_surface + 0.5 * dzu(k) *gradient
1072	ENDIF
1073	ELSE
1074	lad(k) = lad(k-1)
1075	ENDIF
1076	ENDDO
1077
1078	ENDIF
1079
1080	!
1081	!-- In case of no given leaf area density gradients, choose a vanishing
1082	!-- gradient
1083	IF ( lad_vertical_gradient_level(1) == -9999999.9 ) THEN
1084	lad_vertical_gradient_level(1) = 0.0
1085	ENDIF
1086
1087	ENDIF
1088
1089	ENDIF
1090
1091	!
1092	!-- Initialize large scale subsidence if required
1093	IF ( subs_vertical_gradient_level(1) /= -9999999.9 ) THEN
1094	large_scale_subsidence = .TRUE.
1095	CALL init_w_subsidence
1096	END IF
1097
1098
1099
1100	!
1101	!-- Compute Coriolis parameter
1102	f = 2.0 * omega * SIN( phi / 180.0 * pi )
1103	fs = 2.0 * omega * COS( phi / 180.0 * pi )
1104
1105	!
1106	!-- Ocean runs always use reference values in the buoyancy term. Therefore
1107	!-- set the reference temperature equal to the surface temperature.
1108	IF ( ocean .AND. pt_reference == 9999999.9 ) pt_reference = pt_surface
1109
1110	!
1111	!-- Reference value has to be used in buoyancy terms
1112	IF ( pt_reference /= 9999999.9 ) use_reference = .TRUE.
1113
1114	!
1115	!-- Sign of buoyancy/stability terms
1116	IF ( ocean ) atmos_ocean_sign = -1.0
1117
1118	!
1119	!-- Ocean version must use flux boundary conditions at the top
1120	IF ( ocean .AND. .NOT. use_top_fluxes ) THEN
1121	message_string = 'use_top_fluxes must be .TRUE. in ocean version'
1122	CALL message( 'check_parameters', 'PA0042', 1, 2, 0, 6, 0 )
1123	ENDIF
1124
1125	!
1126	!-- In case of a given slope, compute the relevant quantities
1127	IF ( alpha_surface /= 0.0 ) THEN
1128	IF ( ABS( alpha_surface ) > 90.0 ) THEN
1129	WRITE( message_string, * ) 'ABS( alpha_surface = ', alpha_surface, &
1130	' ) must be < 90.0'
1131	CALL message( 'check_parameters', 'PA0043', 1, 2, 0, 6, 0 )
1132	ENDIF
1133	sloping_surface = .TRUE.
1134	cos_alpha_surface = COS( alpha_surface / 180.0 * pi )
1135	sin_alpha_surface = SIN( alpha_surface / 180.0 * pi )
1136	ENDIF
1137
1138	!
1139	!-- Check time step and cfl_factor
1140	IF ( dt /= -1.0 ) THEN
1141	IF ( dt <= 0.0 .AND. dt /= -1.0 ) THEN
1142	WRITE( message_string, * ) 'dt = ', dt , ' <= 0.0'
1143	CALL message( 'check_parameters', 'PA0044', 1, 2, 0, 6, 0 )
1144	ENDIF
1145	dt_3d = dt
1146	dt_fixed = .TRUE.
1147	ENDIF
1148
1149	IF ( cfl_factor <= 0.0 .OR. cfl_factor > 1.0 ) THEN
1150	IF ( cfl_factor == -1.0 ) THEN
1151	IF ( momentum_advec == 'ups-scheme' .OR. &
1152	scalar_advec == 'ups-scheme' ) THEN
1153	cfl_factor = 0.8
1154	ELSE
1155	IF ( timestep_scheme == 'runge-kutta-2' ) THEN
1156	cfl_factor = 0.8
1157	ELSEIF ( timestep_scheme == 'runge-kutta-3' ) THEN
1158	cfl_factor = 0.9
1159	ELSE
1160	cfl_factor = 0.1
1161	ENDIF
1162	ENDIF
1163	ELSE
1164	WRITE( message_string, * ) 'cfl_factor = ', cfl_factor, &
1165	' out of range & 0.0 < cfl_factor <= 1.0 is required'
1166	CALL message( 'check_parameters', 'PA0045', 1, 2, 0, 6, 0 )
1167	ENDIF
1168	ENDIF
1169
1170	!
1171	!-- Store simulated time at begin
1172	simulated_time_at_begin = simulated_time
1173
1174	!
1175	!-- Store reference time for coupled runs and change the coupling flag,
1176	!-- if ...
1177	IF ( simulated_time == 0.0 ) THEN
1178	IF ( coupling_start_time == 0.0 ) THEN
1179	time_since_reference_point = 0.0
1180	ELSEIF ( time_since_reference_point < 0.0 ) THEN
1181	run_coupled = .FALSE.
1182	ENDIF
1183	ENDIF
1184
1185	!
1186	!-- Set wind speed in the Galilei-transformed system
1187	IF ( galilei_transformation ) THEN
1188	IF ( use_ug_for_galilei_tr .AND. &
1189	ug_vertical_gradient_level(1) == 0.0 .AND. &
1190	vg_vertical_gradient_level(1) == 0.0 ) THEN
1191	u_gtrans = ug_surface
1192	v_gtrans = vg_surface
1193	ELSEIF ( use_ug_for_galilei_tr .AND. &
1194	ug_vertical_gradient_level(1) /= 0.0 ) THEN
1195	message_string = 'baroclinicity (ug) not allowed simultaneously' // &
1196	' with galilei transformation'
1197	CALL message( 'check_parameters', 'PA0046', 1, 2, 0, 6, 0 )
1198	ELSEIF ( use_ug_for_galilei_tr .AND. &
1199	vg_vertical_gradient_level(1) /= 0.0 ) THEN
1200	message_string = 'baroclinicity (vg) not allowed simultaneously' // &
1201	' with galilei transformation'
1202	CALL message( 'check_parameters', 'PA0047', 1, 2, 0, 6, 0 )
1203	ELSE
1204	message_string = 'variable translation speed used for galilei-' // &
1205	'transformation, which may cause & instabilities in stably ' // &
1206	'stratified regions'
1207	CALL message( 'check_parameters', 'PA0048', 0, 1, 0, 6, 0 )
1208	ENDIF
1209	ENDIF
1210
1211	!
1212	!-- In case of using a prandtl-layer, calculated (or prescribed) surface
1213	!-- fluxes have to be used in the diffusion-terms
1214	IF ( prandtl_layer ) use_surface_fluxes = .TRUE.
1215
1216	!
1217	!-- Check boundary conditions and set internal variables:
1218	!-- Lateral boundary conditions
1219	IF ( bc_lr /= 'cyclic' .AND. bc_lr /= 'dirichlet/radiation' .AND. &
1220	bc_lr /= 'radiation/dirichlet' ) THEN
1221	message_string = 'unknown boundary condition: bc_lr = "' // &
1222	TRIM( bc_lr ) // '"'
1223	CALL message( 'check_parameters', 'PA0049', 1, 2, 0, 6, 0 )
1224	ENDIF
1225	IF ( bc_ns /= 'cyclic' .AND. bc_ns /= 'dirichlet/radiation' .AND. &
1226	bc_ns /= 'radiation/dirichlet' ) THEN
1227	message_string = 'unknown boundary condition: bc_ns = "' // &
1228	TRIM( bc_ns ) // '"'
1229	CALL message( 'check_parameters', 'PA0050', 1, 2, 0, 6, 0 )
1230	ENDIF
1231
1232	!
1233	!-- Internal variables used for speed optimization in if clauses
1234	IF ( bc_lr /= 'cyclic' ) bc_lr_cyc = .FALSE.
1235	IF ( bc_ns /= 'cyclic' ) bc_ns_cyc = .FALSE.
1236
1237	!
1238	!-- Non-cyclic lateral boundaries require the multigrid method and Piascek-
1239	!-- Willimas or Wicker - Skamarock advection scheme. Several schemes
1240	!-- and tools do not work with non-cyclic boundary conditions.
1241	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
1242	IF ( psolver /= 'multigrid' ) THEN
1243	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1244	'psolver = "' // TRIM( psolver ) // '"'
1245	CALL message( 'check_parameters', 'PA0051', 1, 2, 0, 6, 0 )
1246	ENDIF
1247	IF ( momentum_advec /= 'pw-scheme' .AND. &
1248	momentum_advec /= 'ws-scheme') THEN
1249	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1250	'momentum_advec = "' // TRIM( momentum_advec ) // '"'
1251	CALL message( 'check_parameters', 'PA0052', 1, 2, 0, 6, 0 )
1252	ENDIF
1253	IF ( scalar_advec /= 'pw-scheme' .AND. &
1254	scalar_advec /= 'ws-scheme' ) THEN
1255	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1256	'scalar_advec = "' // TRIM( scalar_advec ) // '"'
1257	CALL message( 'check_parameters', 'PA0053', 1, 2, 0, 6, 0 )
1258	ENDIF
1259	IF ( (scalar_advec == 'ws-scheme' .OR. momentum_advec == 'ws-scheme' ) &
1260	.AND. loop_optimization == 'vector' ) THEN
1261	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1262	'loop_optimization = vector and ' // &
1263	'scalar_advec = "' // TRIM( scalar_advec ) // '"'
1264	! The error message number still needs modification.
1265	CALL message( 'check_parameters', 'PA0342', 1, 2, 0, 6, 0 )
1266	END IF
1267	IF ( galilei_transformation ) THEN
1268	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1269	'galilei_transformation = .T.'
1270	CALL message( 'check_parameters', 'PA0054', 1, 2, 0, 6, 0 )
1271	ENDIF
1272	ENDIF
1273
1274	!
1275	!-- Bottom boundary condition for the turbulent Kinetic energy
1276	IF ( bc_e_b == 'neumann' ) THEN
1277	ibc_e_b = 1
1278	IF ( adjust_mixing_length .AND. prandtl_layer ) THEN
1279	message_string = 'adjust_mixing_length = TRUE and bc_e_b = "neumann"'
1280	CALL message( 'check_parameters', 'PA0055', 0, 1, 0, 6, 0 )
1281	ENDIF
1282	ELSEIF ( bc_e_b == '(u)*2+neumann' ) THEN
1283	ibc_e_b = 2
1284	IF ( .NOT. adjust_mixing_length .AND. prandtl_layer ) THEN
1285	message_string = 'adjust_mixing_length = FALSE and bc_e_b = "' // &
1286	TRIM( bc_e_b ) // '"'
1287	CALL message( 'check_parameters', 'PA0056', 0, 1, 0, 6, 0 )
1288	ENDIF
1289	IF ( .NOT. prandtl_layer ) THEN
1290	bc_e_b = 'neumann'
1291	ibc_e_b = 1
1292	message_string = 'boundary condition bc_e_b changed to "' // &
1293	TRIM( bc_e_b ) // '"'
1294	CALL message( 'check_parameters', 'PA0057', 0, 1, 0, 6, 0 )
1295	ENDIF
1296	ELSE
1297	message_string = 'unknown boundary condition: bc_e_b = "' // &
1298	TRIM( bc_e_b ) // '"'
1299	CALL message( 'check_parameters', 'PA0058', 1, 2, 0, 6, 0 )
1300	ENDIF
1301
1302	!
1303	!-- Boundary conditions for perturbation pressure
1304	IF ( bc_p_b == 'dirichlet' ) THEN
1305	ibc_p_b = 0
1306	ELSEIF ( bc_p_b == 'neumann' ) THEN
1307	ibc_p_b = 1
1308	ELSEIF ( bc_p_b == 'neumann+inhomo' ) THEN
1309	ibc_p_b = 2
1310	ELSE
1311	message_string = 'unknown boundary condition: bc_p_b = "' // &
1312	TRIM( bc_p_b ) // '"'
1313	CALL message( 'check_parameters', 'PA0059', 1, 2, 0, 6, 0 )
1314	ENDIF
1315	IF ( ibc_p_b == 2 .AND. .NOT. prandtl_layer ) THEN
1316	message_string = 'boundary condition: bc_p_b = "' // TRIM( bc_p_b ) // &
1317	'" not allowed with prandtl_layer = .FALSE.'
1318	CALL message( 'check_parameters', 'PA0060', 1, 2, 0, 6, 0 )
1319	ENDIF
1320	IF ( bc_p_t == 'dirichlet' ) THEN
1321	ibc_p_t = 0
1322	ELSEIF ( bc_p_t == 'neumann' ) THEN
1323	ibc_p_t = 1
1324	ELSE
1325	message_string = 'unknown boundary condition: bc_p_t = "' // &
1326	TRIM( bc_p_t ) // '"'
1327	CALL message( 'check_parameters', 'PA0061', 1, 2, 0, 6, 0 )
1328	ENDIF
1329
1330	!
1331	!-- Boundary conditions for potential temperature
1332	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
1333	ibc_pt_b = 2
1334	ELSE
1335	IF ( bc_pt_b == 'dirichlet' ) THEN
1336	ibc_pt_b = 0
1337	ELSEIF ( bc_pt_b == 'neumann' ) THEN
1338	ibc_pt_b = 1
1339	ELSE
1340	message_string = 'unknown boundary condition: bc_pt_b = "' // &
1341	TRIM( bc_pt_b ) // '"'
1342	CALL message( 'check_parameters', 'PA0062', 1, 2, 0, 6, 0 )
1343	ENDIF
1344	ENDIF
1345
1346	IF ( bc_pt_t == 'dirichlet' ) THEN
1347	ibc_pt_t = 0
1348	ELSEIF ( bc_pt_t == 'neumann' ) THEN
1349	ibc_pt_t = 1
1350	ELSEIF ( bc_pt_t == 'initial_gradient' ) THEN
1351	ibc_pt_t = 2
1352	ELSE
1353	message_string = 'unknown boundary condition: bc_pt_t = "' // &
1354	TRIM( bc_pt_t ) // '"'
1355	CALL message( 'check_parameters', 'PA0063', 1, 2, 0, 6, 0 )
1356	ENDIF
1357
1358	IF ( surface_heatflux == 9999999.9 ) constant_heatflux = .FALSE.
1359	IF ( top_heatflux == 9999999.9 ) constant_top_heatflux = .FALSE.
1360	IF ( top_momentumflux_u /= 9999999.9 .AND. &
1361	top_momentumflux_v /= 9999999.9 ) THEN
1362	constant_top_momentumflux = .TRUE.
1363	ELSEIF ( .NOT. ( top_momentumflux_u == 9999999.9 .AND. &
1364	top_momentumflux_v == 9999999.9 ) ) THEN
1365	message_string = 'both, top_momentumflux_u AND top_momentumflux_v ' // &
1366	'must be set'
1367	CALL message( 'check_parameters', 'PA0064', 1, 2, 0, 6, 0 )
1368	ENDIF
1369
1370	!
1371	!-- A given surface temperature implies Dirichlet boundary condition for
1372	!-- temperature. In this case specification of a constant heat flux is
1373	!-- forbidden.
1374	IF ( ibc_pt_b == 0 .AND. constant_heatflux .AND. &
1375	surface_heatflux /= 0.0 ) THEN
1376	message_string = 'boundary_condition: bc_pt_b = "' // TRIM( bc_pt_b ) //&
1377	'& is not allowed with constant_heatflux = .TRUE.'
1378	CALL message( 'check_parameters', 'PA0065', 1, 2, 0, 6, 0 )
1379	ENDIF
1380	IF ( constant_heatflux .AND. pt_surface_initial_change /= 0.0 ) THEN
1381	WRITE ( message_string, * ) 'constant_heatflux = .TRUE. is not allo', &
1382	'wed with pt_surface_initial_change (/=0) = ', &
1383	pt_surface_initial_change
1384	CALL message( 'check_parameters', 'PA0066', 1, 2, 0, 6, 0 )
1385	ENDIF
1386
1387	!
1388	!-- A given temperature at the top implies Dirichlet boundary condition for
1389	!-- temperature. In this case specification of a constant heat flux is
1390	!-- forbidden.
1391	IF ( ibc_pt_t == 0 .AND. constant_top_heatflux .AND. &
1392	top_heatflux /= 0.0 ) THEN
1393	message_string = 'boundary_condition: bc_pt_t = "' // TRIM( bc_pt_t ) //&
1394	'" is not allowed with constant_top_heatflux = .TRUE.'
1395	CALL message( 'check_parameters', 'PA0067', 1, 2, 0, 6, 0 )
1396	ENDIF
1397
1398	!
1399	!-- Boundary conditions for salinity
1400	IF ( ocean ) THEN
1401	IF ( bc_sa_t == 'dirichlet' ) THEN
1402	ibc_sa_t = 0
1403	ELSEIF ( bc_sa_t == 'neumann' ) THEN
1404	ibc_sa_t = 1
1405	ELSE
1406	message_string = 'unknown boundary condition: bc_sa_t = "' // &
1407	TRIM( bc_sa_t ) // '"'
1408	CALL message( 'check_parameters', 'PA0068', 1, 2, 0, 6, 0 )
1409	ENDIF
1410
1411	IF ( top_salinityflux == 9999999.9 ) constant_top_salinityflux = .FALSE.
1412	IF ( ibc_sa_t == 1 .AND. top_salinityflux == 9999999.9 ) THEN
1413	message_string = 'boundary condition: bc_sa_t = "' // &
1414	TRIM( bc_sa_t ) // '" requires to set ' // &
1415	'top_salinityflux'
1416	CALL message( 'check_parameters', 'PA0069', 1, 2, 0, 6, 0 )
1417	ENDIF
1418
1419	!
1420	!-- A fixed salinity at the top implies Dirichlet boundary condition for
1421	!-- salinity. In this case specification of a constant salinity flux is
1422	!-- forbidden.
1423	IF ( ibc_sa_t == 0 .AND. constant_top_salinityflux .AND. &
1424	top_salinityflux /= 0.0 ) THEN
1425	message_string = 'boundary condition: bc_sa_t = "' // &
1426	TRIM( bc_sa_t ) // '" is not allowed with ' // &
1427	'constant_top_salinityflux = .TRUE.'
1428	CALL message( 'check_parameters', 'PA0070', 1, 2, 0, 6, 0 )
1429	ENDIF
1430
1431	ENDIF
1432
1433	!
1434	!-- In case of humidity or passive scalar, set boundary conditions for total
1435	!-- water content / scalar
1436	IF ( humidity .OR. passive_scalar ) THEN
1437	IF ( humidity ) THEN
1438	sq = 'q'
1439	ELSE
1440	sq = 's'
1441	ENDIF
1442	IF ( bc_q_b == 'dirichlet' ) THEN
1443	ibc_q_b = 0
1444	ELSEIF ( bc_q_b == 'neumann' ) THEN
1445	ibc_q_b = 1
1446	ELSE
1447	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
1448	'_b ="' // TRIM( bc_q_b ) // '"'
1449	CALL message( 'check_parameters', 'PA0071', 1, 2, 0, 6, 0 )
1450	ENDIF
1451	IF ( bc_q_t == 'dirichlet' ) THEN
1452	ibc_q_t = 0
1453	ELSEIF ( bc_q_t == 'neumann' ) THEN
1454	ibc_q_t = 1
1455	ELSE
1456	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
1457	'_t ="' // TRIM( bc_q_t ) // '"'
1458	CALL message( 'check_parameters', 'PA0072', 1, 2, 0, 6, 0 )
1459	ENDIF
1460
1461	IF ( surface_waterflux == 9999999.9 ) constant_waterflux = .FALSE.
1462
1463	!
1464	!-- A given surface humidity implies Dirichlet boundary condition for
1465	!-- humidity. In this case specification of a constant water flux is
1466	!-- forbidden.
1467	IF ( ibc_q_b == 0 .AND. constant_waterflux ) THEN
1468	message_string = 'boundary condition: bc_' // TRIM( sq ) // '_b ' // &
1469	'= "' // TRIM( bc_q_b ) // '" is not allowed wi' // &
1470	'th prescribed surface flux'
1471	CALL message( 'check_parameters', 'PA0073', 1, 2, 0, 6, 0 )
1472	ENDIF
1473	IF ( constant_waterflux .AND. q_surface_initial_change /= 0.0 ) THEN
1474	WRITE( message_string, * ) 'a prescribed surface flux is not allo', &
1475	'wed with ', sq, '_surface_initial_change (/=0) = ', &
1476	q_surface_initial_change
1477	CALL message( 'check_parameters', 'PA0074', 1, 2, 0, 6, 0 )
1478	ENDIF
1479
1480	ENDIF
1481
1482	!
1483	!-- Boundary conditions for horizontal components of wind speed
1484	IF ( bc_uv_b == 'dirichlet' ) THEN
1485	ibc_uv_b = 0
1486	ELSEIF ( bc_uv_b == 'neumann' ) THEN
1487	ibc_uv_b = 1
1488	IF ( prandtl_layer ) THEN
1489	message_string = 'boundary condition: bc_uv_b = "' // &
1490	TRIM( bc_uv_b ) // '" is not allowed with prandtl_layer = .TRUE.'
1491	CALL message( 'check_parameters', 'PA0075', 1, 2, 0, 6, 0 )
1492	ENDIF
1493	ELSE
1494	message_string = 'unknown boundary condition: bc_uv_b = "' // &
1495	TRIM( bc_uv_b ) // '"'
1496	CALL message( 'check_parameters', 'PA0076', 1, 2, 0, 6, 0 )
1497	ENDIF
1498	!
1499	!-- In case of coupled simulations u and v at the ground in atmosphere will be
1500	!-- assigned with the u and v values of the ocean surface
1501	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
1502	ibc_uv_b = 2
1503	ENDIF
1504
1505	IF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
1506	bc_uv_t = 'neumann'
1507	ibc_uv_t = 1
1508	ELSE
1509	IF ( bc_uv_t == 'dirichlet' .OR. bc_uv_t == 'dirichlet_0' ) THEN
1510	ibc_uv_t = 0
1511	ELSEIF ( bc_uv_t == 'neumann' ) THEN
1512	ibc_uv_t = 1
1513	ELSE
1514	message_string = 'unknown boundary condition: bc_uv_t = "' // &
1515	TRIM( bc_uv_t ) // '"'
1516	CALL message( 'check_parameters', 'PA0077', 1, 2, 0, 6, 0 )
1517	ENDIF
1518	ENDIF
1519
1520	!
1521	!-- Compute and check, respectively, the Rayleigh Damping parameter
1522	IF ( rayleigh_damping_factor == -1.0 ) THEN
1523	IF ( momentum_advec == 'ups-scheme' ) THEN
1524	rayleigh_damping_factor = 0.01
1525	ELSE
1526	rayleigh_damping_factor = 0.0
1527	ENDIF
1528	ELSE
1529	IF ( rayleigh_damping_factor < 0.0 .OR. rayleigh_damping_factor > 1.0 ) &
1530	THEN
1531	WRITE( message_string, * ) 'rayleigh_damping_factor = ', &
1532	rayleigh_damping_factor, ' out of range [0.0,1.0]'
1533	CALL message( 'check_parameters', 'PA0078', 1, 2, 0, 6, 0 )
1534	ENDIF
1535	ENDIF
1536
1537	IF ( rayleigh_damping_height == -1.0 ) THEN
1538	IF ( .NOT. ocean ) THEN
1539	rayleigh_damping_height = 0.66666666666 * zu(nzt)
1540	ELSE
1541	rayleigh_damping_height = 0.66666666666 * zu(nzb)
1542	ENDIF
1543	ELSE
1544	IF ( .NOT. ocean ) THEN
1545	IF ( rayleigh_damping_height < 0.0 .OR. &
1546	rayleigh_damping_height > zu(nzt) ) THEN
1547	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
1548	rayleigh_damping_height, ' out of range [0.0,', zu(nzt), ']'
1549	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
1550	ENDIF
1551	ELSE
1552	IF ( rayleigh_damping_height > 0.0 .OR. &
1553	rayleigh_damping_height < zu(nzb) ) THEN
1554	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
1555	rayleigh_damping_height, ' out of range [0.0,', zu(nzb), ']'
1556	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
1557	ENDIF
1558	ENDIF
1559	ENDIF
1560
1561	!
1562	!-- Check limiters for Upstream-Spline scheme
1563	IF ( overshoot_limit_u < 0.0 .OR. overshoot_limit_v < 0.0 .OR. &
1564	overshoot_limit_w < 0.0 .OR. overshoot_limit_pt < 0.0 .OR. &
1565	overshoot_limit_e < 0.0 ) THEN
1566	message_string = 'overshoot_limit_... < 0.0 is not allowed'
1567	CALL message( 'check_parameters', 'PA0080', 1, 2, 0, 6, 0 )
1568	ENDIF
1569	IF ( ups_limit_u < 0.0 .OR. ups_limit_v < 0.0 .OR. ups_limit_w < 0.0 .OR. &
1570	ups_limit_pt < 0.0 .OR. ups_limit_e < 0.0 ) THEN
1571	message_string = 'ups_limit_... < 0.0 is not allowed'
1572	CALL message( 'check_parameters', 'PA0081', 1, 2, 0, 6, 0 )
1573	ENDIF
1574
1575	!
1576	!-- Check number of chosen statistic regions. More than 10 regions are not
1577	!-- allowed, because so far no more than 10 corresponding output files can
1578	!-- be opened (cf. check_open)
1579	IF ( statistic_regions > 9 .OR. statistic_regions < 0 ) THEN
1580	WRITE ( message_string, * ) 'number of statistic_regions = ', &
1581	statistic_regions+1, ' but only 10 regions are allowed'
1582	CALL message( 'check_parameters', 'PA0082', 1, 2, 0, 6, 0 )
1583	ENDIF
1584	IF ( normalizing_region > statistic_regions .OR. &
1585	normalizing_region < 0) THEN
1586	WRITE ( message_string, * ) 'normalizing_region = ', &
1587	normalizing_region, ' must be >= 0 and <= ',statistic_regions, &
1588	' (value of statistic_regions)'
1589	CALL message( 'check_parameters', 'PA0083', 1, 2, 0, 6, 0 )
1590	ENDIF
1591
1592	!
1593	!-- Check the interval for sorting particles.
1594	!-- Using particles as cloud droplets requires sorting after each timestep.
1595	IF ( dt_sort_particles /= 0.0 .AND. cloud_droplets ) THEN
1596	dt_sort_particles = 0.0
1597	message_string = 'dt_sort_particles is reset to 0.0 because of cloud' //&
1598	'_droplets = .TRUE.'
1599	CALL message( 'check_parameters', 'PA0084', 0, 1, 0, 6, 0 )
1600	ENDIF
1601
1602	!
1603	!-- Set the default intervals for data output, if necessary
1604	!-- NOTE: dt_dosp has already been set in package_parin
1605	IF ( dt_data_output /= 9999999.9 ) THEN
1606	IF ( dt_dopr == 9999999.9 ) dt_dopr = dt_data_output
1607	IF ( dt_dopts == 9999999.9 ) dt_dopts = dt_data_output
1608	IF ( dt_do2d_xy == 9999999.9 ) dt_do2d_xy = dt_data_output
1609	IF ( dt_do2d_xz == 9999999.9 ) dt_do2d_xz = dt_data_output
1610	IF ( dt_do2d_yz == 9999999.9 ) dt_do2d_yz = dt_data_output
1611	IF ( dt_do3d == 9999999.9 ) dt_do3d = dt_data_output
1612	IF ( dt_data_output_av == 9999999.9 ) dt_data_output_av = dt_data_output
1613	DO mid = 1, max_masks
1614	IF ( dt_domask(mid) == 9999999.9 ) dt_domask(mid) = dt_data_output
1615	ENDDO
1616	ENDIF
1617
1618	!
1619	!-- Set the default skip time intervals for data output, if necessary
1620	IF ( skip_time_dopr == 9999999.9 ) &
1621	skip_time_dopr = skip_time_data_output
1622	IF ( skip_time_dosp == 9999999.9 ) &
1623	skip_time_dosp = skip_time_data_output
1624	IF ( skip_time_do2d_xy == 9999999.9 ) &
1625	skip_time_do2d_xy = skip_time_data_output
1626	IF ( skip_time_do2d_xz == 9999999.9 ) &
1627	skip_time_do2d_xz = skip_time_data_output
1628	IF ( skip_time_do2d_yz == 9999999.9 ) &
1629	skip_time_do2d_yz = skip_time_data_output
1630	IF ( skip_time_do3d == 9999999.9 ) &
1631	skip_time_do3d = skip_time_data_output
1632	IF ( skip_time_data_output_av == 9999999.9 ) &
1633	skip_time_data_output_av = skip_time_data_output
1634	DO mid = 1, max_masks
1635	IF ( skip_time_domask(mid) == 9999999.9 ) &
1636	skip_time_domask(mid) = skip_time_data_output
1637	ENDDO
1638
1639	!
1640	!-- Check the average intervals (first for 3d-data, then for profiles and
1641	!-- spectra)
1642	IF ( averaging_interval > dt_data_output_av ) THEN
1643	WRITE( message_string, * ) 'averaging_interval = ', &
1644	averaging_interval, ' must be <= dt_data_output = ', dt_data_output
1645	CALL message( 'check_parameters', 'PA0085', 1, 2, 0, 6, 0 )
1646	ENDIF
1647
1648	IF ( averaging_interval_pr == 9999999.9 ) THEN
1649	averaging_interval_pr = averaging_interval
1650	ENDIF
1651
1652	IF ( averaging_interval_pr > dt_dopr ) THEN
1653	WRITE( message_string, * ) 'averaging_interval_pr = ', &
1654	averaging_interval_pr, ' must be <= dt_dopr = ', dt_dopr
1655	CALL message( 'check_parameters', 'PA0086', 1, 2, 0, 6, 0 )
1656	ENDIF
1657
1658	IF ( averaging_interval_sp == 9999999.9 ) THEN
1659	averaging_interval_sp = averaging_interval
1660	ENDIF
1661
1662	IF ( averaging_interval_sp > dt_dosp ) THEN
1663	WRITE( message_string, * ) 'averaging_interval_sp = ', &
1664	averaging_interval_sp, ' must be <= dt_dosp = ', dt_dosp
1665	CALL message( 'check_parameters', 'PA0087', 1, 2, 0, 6, 0 )
1666	ENDIF
1667
1668	!
1669	!-- Set the default interval for profiles entering the temporal average
1670	IF ( dt_averaging_input_pr == 9999999.9 ) THEN
1671	dt_averaging_input_pr = dt_averaging_input
1672	ENDIF
1673
1674	!
1675	!-- Set the default interval for the output of timeseries to a reasonable
1676	!-- value (tries to minimize the number of calls of flow_statistics)
1677	IF ( dt_dots == 9999999.9 ) THEN
1678	IF ( averaging_interval_pr == 0.0 ) THEN
1679	dt_dots = MIN( dt_run_control, dt_dopr )
1680	ELSE
1681	dt_dots = MIN( dt_run_control, dt_averaging_input_pr )
1682	ENDIF
1683	ENDIF
1684
1685	!
1686	!-- Check the sample rate for averaging (first for 3d-data, then for profiles)
1687	IF ( dt_averaging_input > averaging_interval ) THEN
1688	WRITE( message_string, * ) 'dt_averaging_input = ', &
1689	dt_averaging_input, ' must be <= averaging_interval = ', &
1690	averaging_interval
1691	CALL message( 'check_parameters', 'PA0088', 1, 2, 0, 6, 0 )
1692	ENDIF
1693
1694	IF ( dt_averaging_input_pr > averaging_interval_pr ) THEN
1695	WRITE( message_string, * ) 'dt_averaging_input_pr = ', &
1696	dt_averaging_input_pr, ' must be <= averaging_interval_pr = ', &
1697	averaging_interval_pr
1698	CALL message( 'check_parameters', 'PA0089', 1, 2, 0, 6, 0 )
1699	ENDIF
1700
1701	!
1702	!-- Set the default value for the integration interval of precipitation amount
1703	IF ( precipitation ) THEN
1704	IF ( precipitation_amount_interval == 9999999.9 ) THEN
1705	precipitation_amount_interval = dt_do2d_xy
1706	ELSE
1707	IF ( precipitation_amount_interval > dt_do2d_xy ) THEN
1708	WRITE( message_string, * ) 'precipitation_amount_interval = ', &
1709	precipitation_amount_interval, ' must not be larger than ', &
1710	'dt_do2d_xy = ', dt_do2d_xy
1711	CALL message( 'check_parameters', 'PA0090', 1, 2, 0, 6, 0 )
1712	ENDIF
1713	ENDIF
1714	ENDIF
1715
1716	!
1717	!-- Determine the number of output profiles and check whether they are
1718	!-- permissible
1719	DO WHILE ( data_output_pr(dopr_n+1) /= ' ' )
1720
1721	dopr_n = dopr_n + 1
1722	i = dopr_n
1723
1724	!
1725	!-- Determine internal profile number (for hom, homs)
1726	!-- and store height levels
1727	SELECT CASE ( TRIM( data_output_pr(i) ) )
1728
1729	CASE ( 'u', '#u' )
1730	dopr_index(i) = 1
1731	dopr_unit(i) = 'm/s'
1732	hom(:,2,1,:) = SPREAD( zu, 2, statistic_regions+1 )
1733	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1734	dopr_initial_index(i) = 5
1735	hom(:,2,5,:) = SPREAD( zu, 2, statistic_regions+1 )
1736	data_output_pr(i) = data_output_pr(i)(2:)
1737	ENDIF
1738
1739	CASE ( 'v', '#v' )
1740	dopr_index(i) = 2
1741	dopr_unit(i) = 'm/s'
1742	hom(:,2,2,:) = SPREAD( zu, 2, statistic_regions+1 )
1743	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1744	dopr_initial_index(i) = 6
1745	hom(:,2,6,:) = SPREAD( zu, 2, statistic_regions+1 )
1746	data_output_pr(i) = data_output_pr(i)(2:)
1747	ENDIF
1748
1749	CASE ( 'w' )
1750	dopr_index(i) = 3
1751	dopr_unit(i) = 'm/s'
1752	hom(:,2,3,:) = SPREAD( zw, 2, statistic_regions+1 )
1753
1754	CASE ( 'pt', '#pt' )
1755	IF ( .NOT. cloud_physics ) THEN
1756	dopr_index(i) = 4
1757	dopr_unit(i) = 'K'
1758	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
1759	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1760	dopr_initial_index(i) = 7
1761	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
1762	hom(nzb,2,7,:) = 0.0 ! because zu(nzb) is negative
1763	data_output_pr(i) = data_output_pr(i)(2:)
1764	ENDIF
1765	ELSE
1766	dopr_index(i) = 43
1767	dopr_unit(i) = 'K'
1768	hom(:,2,43,:) = SPREAD( zu, 2, statistic_regions+1 )
1769	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1770	dopr_initial_index(i) = 28
1771	hom(:,2,28,:) = SPREAD( zu, 2, statistic_regions+1 )
1772	hom(nzb,2,28,:) = 0.0 ! because zu(nzb) is negative
1773	data_output_pr(i) = data_output_pr(i)(2:)
1774	ENDIF
1775	ENDIF
1776
1777	CASE ( 'e' )
1778	dopr_index(i) = 8
1779	dopr_unit(i) = 'm2/s2'
1780	hom(:,2,8,:) = SPREAD( zu, 2, statistic_regions+1 )
1781	hom(nzb,2,8,:) = 0.0
1782
1783	CASE ( 'km', '#km' )
1784	dopr_index(i) = 9
1785	dopr_unit(i) = 'm2/s'
1786	hom(:,2,9,:) = SPREAD( zu, 2, statistic_regions+1 )
1787	hom(nzb,2,9,:) = 0.0
1788	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1789	dopr_initial_index(i) = 23
1790	hom(:,2,23,:) = hom(:,2,9,:)
1791	data_output_pr(i) = data_output_pr(i)(2:)
1792	ENDIF
1793
1794	CASE ( 'kh', '#kh' )
1795	dopr_index(i) = 10
1796	dopr_unit(i) = 'm2/s'
1797	hom(:,2,10,:) = SPREAD( zu, 2, statistic_regions+1 )
1798	hom(nzb,2,10,:) = 0.0
1799	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1800	dopr_initial_index(i) = 24
1801	hom(:,2,24,:) = hom(:,2,10,:)
1802	data_output_pr(i) = data_output_pr(i)(2:)
1803	ENDIF
1804
1805	CASE ( 'l', '#l' )
1806	dopr_index(i) = 11
1807	dopr_unit(i) = 'm'
1808	hom(:,2,11,:) = SPREAD( zu, 2, statistic_regions+1 )
1809	hom(nzb,2,11,:) = 0.0
1810	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1811	dopr_initial_index(i) = 25
1812	hom(:,2,25,:) = hom(:,2,11,:)
1813	data_output_pr(i) = data_output_pr(i)(2:)
1814	ENDIF
1815
1816	CASE ( 'w"u"' )
1817	dopr_index(i) = 12
1818	dopr_unit(i) = 'm2/s2'
1819	hom(:,2,12,:) = SPREAD( zw, 2, statistic_regions+1 )
1820	IF ( prandtl_layer ) hom(nzb,2,12,:) = zu(1)
1821
1822	CASE ( 'wu' )
1823	dopr_index(i) = 13
1824	dopr_unit(i) = 'm2/s2'
1825	hom(:,2,13,:) = SPREAD( zw, 2, statistic_regions+1 )
1826
1827	CASE ( 'w"v"' )
1828	dopr_index(i) = 14
1829	dopr_unit(i) = 'm2/s2'
1830	hom(:,2,14,:) = SPREAD( zw, 2, statistic_regions+1 )
1831	IF ( prandtl_layer ) hom(nzb,2,14,:) = zu(1)
1832
1833	CASE ( 'wv' )
1834	dopr_index(i) = 15
1835	dopr_unit(i) = 'm2/s2'
1836	hom(:,2,15,:) = SPREAD( zw, 2, statistic_regions+1 )
1837
1838	CASE ( 'w"pt"' )
1839	dopr_index(i) = 16
1840	dopr_unit(i) = 'K m/s'
1841	hom(:,2,16,:) = SPREAD( zw, 2, statistic_regions+1 )
1842
1843	CASE ( 'wpt' )
1844	dopr_index(i) = 17
1845	dopr_unit(i) = 'K m/s'
1846	hom(:,2,17,:) = SPREAD( zw, 2, statistic_regions+1 )
1847
1848	CASE ( 'wpt' )
1849	dopr_index(i) = 18
1850	dopr_unit(i) = 'K m/s'
1851	hom(:,2,18,:) = SPREAD( zw, 2, statistic_regions+1 )
1852
1853	CASE ( 'wu' )
1854	dopr_index(i) = 19
1855	dopr_unit(i) = 'm2/s2'
1856	hom(:,2,19,:) = SPREAD( zw, 2, statistic_regions+1 )
1857	IF ( prandtl_layer ) hom(nzb,2,19,:) = zu(1)
1858
1859	CASE ( 'wv' )
1860	dopr_index(i) = 20
1861	dopr_unit(i) = 'm2/s2'
1862	hom(:,2,20,:) = SPREAD( zw, 2, statistic_regions+1 )
1863	IF ( prandtl_layer ) hom(nzb,2,20,:) = zu(1)
1864
1865	CASE ( 'wptBC' )
1866	dopr_index(i) = 21
1867	dopr_unit(i) = 'K m/s'
1868	hom(:,2,21,:) = SPREAD( zw, 2, statistic_regions+1 )
1869
1870	CASE ( 'wptBC' )
1871	dopr_index(i) = 22
1872	dopr_unit(i) = 'K m/s'
1873	hom(:,2,22,:) = SPREAD( zw, 2, statistic_regions+1 )
1874
1875	CASE ( 'sa', '#sa' )
1876	IF ( .NOT. ocean ) THEN
1877	message_string = 'data_output_pr = ' // &
1878	TRIM( data_output_pr(i) ) // ' is not imp' // &
1879	'lemented for ocean = .FALSE.'
1880	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
1881	ELSE
1882	dopr_index(i) = 23
1883	dopr_unit(i) = 'psu'
1884	hom(:,2,23,:) = SPREAD( zu, 2, statistic_regions+1 )
1885	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1886	dopr_initial_index(i) = 26
1887	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1888	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1889	data_output_pr(i) = data_output_pr(i)(2:)
1890	ENDIF
1891	ENDIF
1892
1893	CASE ( 'u*2' )
1894	dopr_index(i) = 30
1895	dopr_unit(i) = 'm2/s2'
1896	hom(:,2,30,:) = SPREAD( zu, 2, statistic_regions+1 )
1897
1898	CASE ( 'v*2' )
1899	dopr_index(i) = 31
1900	dopr_unit(i) = 'm2/s2'
1901	hom(:,2,31,:) = SPREAD( zu, 2, statistic_regions+1 )
1902
1903	CASE ( 'w*2' )
1904	dopr_index(i) = 32
1905	dopr_unit(i) = 'm2/s2'
1906	hom(:,2,32,:) = SPREAD( zw, 2, statistic_regions+1 )
1907
1908	CASE ( 'pt*2' )
1909	dopr_index(i) = 33
1910	dopr_unit(i) = 'K2'
1911	hom(:,2,33,:) = SPREAD( zu, 2, statistic_regions+1 )
1912
1913	CASE ( 'e*' )
1914	dopr_index(i) = 34
1915	dopr_unit(i) = 'm2/s2'
1916	hom(:,2,34,:) = SPREAD( zu, 2, statistic_regions+1 )
1917
1918	CASE ( 'w2pt' )
1919	dopr_index(i) = 35
1920	dopr_unit(i) = 'K m2/s2'
1921	hom(:,2,35,:) = SPREAD( zw, 2, statistic_regions+1 )
1922
1923	CASE ( 'wpt2' )
1924	dopr_index(i) = 36
1925	dopr_unit(i) = 'K2 m/s'
1926	hom(:,2,36,:) = SPREAD( zw, 2, statistic_regions+1 )
1927
1928	CASE ( 'we' )
1929	dopr_index(i) = 37
1930	dopr_unit(i) = 'm3/s3'
1931	hom(:,2,37,:) = SPREAD( zw, 2, statistic_regions+1 )
1932
1933	CASE ( 'w*3' )
1934	dopr_index(i) = 38
1935	dopr_unit(i) = 'm3/s3'
1936	hom(:,2,38,:) = SPREAD( zw, 2, statistic_regions+1 )
1937
1938	CASE ( 'Sw' )
1939	dopr_index(i) = 39
1940	dopr_unit(i) = 'none'
1941	hom(:,2,39,:) = SPREAD( zw, 2, statistic_regions+1 )
1942
1943	CASE ( 'p' )
1944	dopr_index(i) = 40
1945	dopr_unit(i) = 'Pa'
1946	hom(:,2,40,:) = SPREAD( zu, 2, statistic_regions+1 )
1947
1948	CASE ( 'q', '#q' )
1949	IF ( .NOT. humidity ) THEN
1950	message_string = 'data_output_pr = ' // &
1951	TRIM( data_output_pr(i) ) // ' is not imp' // &
1952	'lemented for humidity = .FALSE.'
1953	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
1954	ELSE
1955	dopr_index(i) = 41
1956	dopr_unit(i) = 'kg/kg'
1957	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
1958	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1959	dopr_initial_index(i) = 26
1960	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1961	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1962	data_output_pr(i) = data_output_pr(i)(2:)
1963	ENDIF
1964	ENDIF
1965
1966	CASE ( 's', '#s' )
1967	IF ( .NOT. passive_scalar ) THEN
1968	message_string = 'data_output_pr = ' // &
1969	TRIM( data_output_pr(i) ) // ' is not imp' // &
1970	'lemented for passive_scalar = .FALSE.'
1971	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
1972	ELSE
1973	dopr_index(i) = 41
1974	dopr_unit(i) = 'kg/m3'
1975	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
1976	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1977	dopr_initial_index(i) = 26
1978	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1979	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1980	data_output_pr(i) = data_output_pr(i)(2:)
1981	ENDIF
1982	ENDIF
1983
1984	CASE ( 'qv', '#qv' )
1985	IF ( .NOT. cloud_physics ) THEN
1986	dopr_index(i) = 41
1987	dopr_unit(i) = 'kg/kg'
1988	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
1989	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1990	dopr_initial_index(i) = 26
1991	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1992	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1993	data_output_pr(i) = data_output_pr(i)(2:)
1994	ENDIF
1995	ELSE
1996	dopr_index(i) = 42
1997	dopr_unit(i) = 'kg/kg'
1998	hom(:,2,42,:) = SPREAD( zu, 2, statistic_regions+1 )
1999	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2000	dopr_initial_index(i) = 27
2001	hom(:,2,27,:) = SPREAD( zu, 2, statistic_regions+1 )
2002	hom(nzb,2,27,:) = 0.0 ! weil zu(nzb) negativ ist
2003	data_output_pr(i) = data_output_pr(i)(2:)
2004	ENDIF
2005	ENDIF
2006
2007	CASE ( 'lpt', '#lpt' )
2008	IF ( .NOT. cloud_physics ) THEN
2009	message_string = 'data_output_pr = ' // &
2010	TRIM( data_output_pr(i) ) // ' is not imp' // &
2011	'lemented for cloud_physics = .FALSE.'
2012	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2013	ELSE
2014	dopr_index(i) = 4
2015	dopr_unit(i) = 'K'
2016	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
2017	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2018	dopr_initial_index(i) = 7
2019	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
2020	hom(nzb,2,7,:) = 0.0 ! weil zu(nzb) negativ ist
2021	data_output_pr(i) = data_output_pr(i)(2:)
2022	ENDIF
2023	ENDIF
2024
2025	CASE ( 'vpt', '#vpt' )
2026	dopr_index(i) = 44
2027	dopr_unit(i) = 'K'
2028	hom(:,2,44,:) = SPREAD( zu, 2, statistic_regions+1 )
2029	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2030	dopr_initial_index(i) = 29
2031	hom(:,2,29,:) = SPREAD( zu, 2, statistic_regions+1 )
2032	hom(nzb,2,29,:) = 0.0 ! weil zu(nzb) negativ ist
2033	data_output_pr(i) = data_output_pr(i)(2:)
2034	ENDIF
2035
2036	CASE ( 'w"vpt"' )
2037	dopr_index(i) = 45
2038	dopr_unit(i) = 'K m/s'
2039	hom(:,2,45,:) = SPREAD( zw, 2, statistic_regions+1 )
2040
2041	CASE ( 'wvpt' )
2042	dopr_index(i) = 46
2043	dopr_unit(i) = 'K m/s'
2044	hom(:,2,46,:) = SPREAD( zw, 2, statistic_regions+1 )
2045
2046	CASE ( 'wvpt' )
2047	dopr_index(i) = 47
2048	dopr_unit(i) = 'K m/s'
2049	hom(:,2,47,:) = SPREAD( zw, 2, statistic_regions+1 )
2050
2051	CASE ( 'w"q"' )
2052	IF ( .NOT. humidity ) THEN
2053	message_string = 'data_output_pr = ' // &
2054	TRIM( data_output_pr(i) ) // ' is not imp' // &
2055	'lemented for humidity = .FALSE.'
2056	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2057	ELSE
2058	dopr_index(i) = 48
2059	dopr_unit(i) = 'kg/kg m/s'
2060	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2061	ENDIF
2062
2063	CASE ( 'wq' )
2064	IF ( .NOT. humidity ) THEN
2065	message_string = 'data_output_pr = ' // &
2066	TRIM( data_output_pr(i) ) // ' is not imp' // &
2067	'lemented for humidity = .FALSE.'
2068	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2069	ELSE
2070	dopr_index(i) = 49
2071	dopr_unit(i) = 'kg/kg m/s'
2072	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2073	ENDIF
2074
2075	CASE ( 'wq' )
2076	IF ( .NOT. humidity ) THEN
2077	message_string = 'data_output_pr = ' // &
2078	TRIM( data_output_pr(i) ) // ' is not imp' // &
2079	'lemented for humidity = .FALSE.'
2080	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2081	ELSE
2082	dopr_index(i) = 50
2083	dopr_unit(i) = 'kg/kg m/s'
2084	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2085	ENDIF
2086
2087	CASE ( 'w"s"' )
2088	IF ( .NOT. passive_scalar ) THEN
2089	message_string = 'data_output_pr = ' // &
2090	TRIM( data_output_pr(i) ) // ' is not imp' // &
2091	'lemented for passive_scalar = .FALSE.'
2092	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2093	ELSE
2094	dopr_index(i) = 48
2095	dopr_unit(i) = 'kg/m3 m/s'
2096	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2097	ENDIF
2098
2099	CASE ( 'ws' )
2100	IF ( .NOT. passive_scalar ) THEN
2101	message_string = 'data_output_pr = ' // &
2102	TRIM( data_output_pr(i) ) // ' is not imp' // &
2103	'lemented for passive_scalar = .FALSE.'
2104	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2105	ELSE
2106	dopr_index(i) = 49
2107	dopr_unit(i) = 'kg/m3 m/s'
2108	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2109	ENDIF
2110
2111	CASE ( 'ws' )
2112	IF ( .NOT. passive_scalar ) THEN
2113	message_string = 'data_output_pr = ' // &
2114	TRIM( data_output_pr(i) ) // ' is not imp' // &
2115	'lemented for passive_scalar = .FALSE.'
2116	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2117	ELSE
2118	dopr_index(i) = 50
2119	dopr_unit(i) = 'kg/m3 m/s'
2120	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2121	ENDIF
2122
2123	CASE ( 'w"qv"' )
2124	IF ( humidity .AND. .NOT. cloud_physics ) &
2125	THEN
2126	dopr_index(i) = 48
2127	dopr_unit(i) = 'kg/kg m/s'
2128	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2129	ELSEIF( humidity .AND. cloud_physics ) THEN
2130	dopr_index(i) = 51
2131	dopr_unit(i) = 'kg/kg m/s'
2132	hom(:,2,51,:) = SPREAD( zw, 2, statistic_regions+1 )
2133	ELSE
2134	message_string = 'data_output_pr = ' // &
2135	TRIM( data_output_pr(i) ) // ' is not imp' // &
2136	'lemented for cloud_physics = .FALSE. an&' // &
2137	'd humidity = .FALSE.'
2138	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2139	ENDIF
2140
2141	CASE ( 'wqv' )
2142	IF ( humidity .AND. .NOT. cloud_physics ) &
2143	THEN
2144	dopr_index(i) = 49
2145	dopr_unit(i) = 'kg/kg m/s'
2146	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2147	ELSEIF( humidity .AND. cloud_physics ) THEN
2148	dopr_index(i) = 52
2149	dopr_unit(i) = 'kg/kg m/s'
2150	hom(:,2,52,:) = SPREAD( zw, 2, statistic_regions+1 )
2151	ELSE
2152	message_string = 'data_output_pr = ' // &
2153	TRIM( data_output_pr(i) ) // ' is not imp' // &
2154	'lemented for cloud_physics = .FALSE. an&' // &
2155	'd humidity = .FALSE.'
2156	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2157	ENDIF
2158
2159	CASE ( 'wqv' )
2160	IF ( humidity .AND. .NOT. cloud_physics ) &
2161	THEN
2162	dopr_index(i) = 50
2163	dopr_unit(i) = 'kg/kg m/s'
2164	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2165	ELSEIF( humidity .AND. cloud_physics ) THEN
2166	dopr_index(i) = 53
2167	dopr_unit(i) = 'kg/kg m/s'
2168	hom(:,2,53,:) = SPREAD( zw, 2, statistic_regions+1 )
2169	ELSE
2170	message_string = 'data_output_pr = ' // &
2171	TRIM( data_output_pr(i) ) // ' is not imp' // &
2172	'lemented for cloud_physics = .FALSE. an&' // &
2173	'd humidity = .FALSE.'
2174	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2175	ENDIF
2176
2177	CASE ( 'ql' )
2178	IF ( .NOT. cloud_physics .AND. .NOT. cloud_droplets ) THEN
2179	message_string = 'data_output_pr = ' // &
2180	TRIM( data_output_pr(i) ) // ' is not imp' // &
2181	'lemented for cloud_physics = .FALSE. or' // &
2182	'&cloud_droplets = .FALSE.'
2183	CALL message( 'check_parameters', 'PA0096', 1, 2, 0, 6, 0 )
2184	ELSE
2185	dopr_index(i) = 54
2186	dopr_unit(i) = 'kg/kg'
2187	hom(:,2,54,:) = SPREAD( zu, 2, statistic_regions+1 )
2188	ENDIF
2189
2190	CASE ( 'wuu*:dz' )
2191	dopr_index(i) = 55
2192	dopr_unit(i) = 'm2/s3'
2193	hom(:,2,55,:) = SPREAD( zu, 2, statistic_regions+1 )
2194
2195	CASE ( 'wp:dz' )
2196	dopr_index(i) = 56
2197	dopr_unit(i) = 'm2/s3'
2198	hom(:,2,56,:) = SPREAD( zw, 2, statistic_regions+1 )
2199
2200	CASE ( 'w"e:dz' )
2201	dopr_index(i) = 57
2202	dopr_unit(i) = 'm2/s3'
2203	hom(:,2,57,:) = SPREAD( zu, 2, statistic_regions+1 )
2204
2205
2206	CASE ( 'u"pt"' )
2207	dopr_index(i) = 58
2208	dopr_unit(i) = 'K m/s'
2209	hom(:,2,58,:) = SPREAD( zu, 2, statistic_regions+1 )
2210
2211	CASE ( 'upt' )
2212	dopr_index(i) = 59
2213	dopr_unit(i) = 'K m/s'
2214	hom(:,2,59,:) = SPREAD( zu, 2, statistic_regions+1 )
2215
2216	CASE ( 'upt_t' )
2217	dopr_index(i) = 60
2218	dopr_unit(i) = 'K m/s'
2219	hom(:,2,60,:) = SPREAD( zu, 2, statistic_regions+1 )
2220
2221	CASE ( 'v"pt"' )
2222	dopr_index(i) = 61
2223	dopr_unit(i) = 'K m/s'
2224	hom(:,2,61,:) = SPREAD( zu, 2, statistic_regions+1 )
2225
2226	CASE ( 'vpt' )
2227	dopr_index(i) = 62
2228	dopr_unit(i) = 'K m/s'
2229	hom(:,2,62,:) = SPREAD( zu, 2, statistic_regions+1 )
2230
2231	CASE ( 'vpt_t' )
2232	dopr_index(i) = 63
2233	dopr_unit(i) = 'K m/s'
2234	hom(:,2,63,:) = SPREAD( zu, 2, statistic_regions+1 )
2235
2236	CASE ( 'rho' )
2237	IF ( .NOT. ocean ) THEN
2238	message_string = 'data_output_pr = ' // &
2239	TRIM( data_output_pr(i) ) // ' is not imp' // &
2240	'lemented for ocean = .FALSE.'
2241	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2242	ELSE
2243	dopr_index(i) = 64
2244	dopr_unit(i) = 'kg/m3'
2245	hom(:,2,64,:) = SPREAD( zu, 2, statistic_regions+1 )
2246	ENDIF
2247
2248	CASE ( 'w"sa"' )
2249	IF ( .NOT. ocean ) THEN
2250	message_string = 'data_output_pr = ' // &
2251	TRIM( data_output_pr(i) ) // ' is not imp' // &
2252	'lemented for ocean = .FALSE.'
2253	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2254	ELSE
2255	dopr_index(i) = 65
2256	dopr_unit(i) = 'psu m/s'
2257	hom(:,2,65,:) = SPREAD( zw, 2, statistic_regions+1 )
2258	ENDIF
2259
2260	CASE ( 'wsa' )
2261	IF ( .NOT. ocean ) THEN
2262	message_string = 'data_output_pr = ' // &
2263	TRIM( data_output_pr(i) ) // ' is not imp' // &
2264	'lemented for ocean = .FALSE.'
2265	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2266	ELSE
2267	dopr_index(i) = 66
2268	dopr_unit(i) = 'psu m/s'
2269	hom(:,2,66,:) = SPREAD( zw, 2, statistic_regions+1 )
2270	ENDIF
2271
2272	CASE ( 'wsa' )
2273	IF ( .NOT. ocean ) THEN
2274	message_string = 'data_output_pr = ' // &
2275	TRIM( data_output_pr(i) ) // ' is not imp' // &
2276	'lemented for ocean = .FALSE.'
2277	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2278	ELSE
2279	dopr_index(i) = 67
2280	dopr_unit(i) = 'psu m/s'
2281	hom(:,2,67,:) = SPREAD( zw, 2, statistic_regions+1 )
2282	ENDIF
2283
2284	CASE ( 'wp' )
2285	dopr_index(i) = 68
2286	dopr_unit(i) = 'm3/s3'
2287	hom(:,2,68,:) = SPREAD( zu, 2, statistic_regions+1 )
2288
2289	CASE ( 'w"e' )
2290	dopr_index(i) = 69
2291	dopr_unit(i) = 'm3/s3'
2292	hom(:,2,69,:) = SPREAD( zu, 2, statistic_regions+1 )
2293
2294	CASE ( 'q*2' )
2295	IF ( .NOT. humidity ) THEN
2296	message_string = 'data_output_pr = ' // &
2297	TRIM( data_output_pr(i) ) // ' is not imp' // &
2298	'lemented for humidity = .FALSE.'
2299	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2300	ELSE
2301	dopr_index(i) = 70
2302	dopr_unit(i) = 'kg2/kg2'
2303	hom(:,2,70,:) = SPREAD( zu, 2, statistic_regions+1 )
2304	ENDIF
2305
2306	CASE ( 'prho' )
2307	IF ( .NOT. ocean ) THEN
2308	message_string = 'data_output_pr = ' // &
2309	TRIM( data_output_pr(i) ) // ' is not imp' // &
2310	'lemented for ocean = .FALSE.'
2311	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2312	ELSE
2313	dopr_index(i) = 71
2314	dopr_unit(i) = 'kg/m3'
2315	hom(:,2,71,:) = SPREAD( zu, 2, statistic_regions+1 )
2316	ENDIF
2317
2318	CASE ( 'hyp' )
2319	dopr_index(i) = 72
2320	dopr_unit(i) = 'dbar'
2321	hom(:,2,72,:) = SPREAD( zu, 2, statistic_regions+1 )
2322
2323	CASE DEFAULT
2324
2325	CALL user_check_data_output_pr( data_output_pr(i), i, unit )
2326
2327	IF ( unit == 'illegal' ) THEN
2328	IF ( data_output_pr_user(1) /= ' ' ) THEN
2329	message_string = 'illegal value for data_output_pr or ' // &
2330	'data_output_pr_user = "' // &
2331	TRIM( data_output_pr(i) ) // '"'
2332	CALL message( 'check_parameters', 'PA0097', 1, 2, 0, 6, 0 )
2333	ELSE
2334	message_string = 'illegal value for data_output_pr = "' // &
2335	TRIM( data_output_pr(i) ) // '"'
2336	CALL message( 'check_parameters', 'PA0098', 1, 2, 0, 6, 0 )
2337	ENDIF
2338	ENDIF
2339
2340	END SELECT
2341
2342	!
2343	!-- Check to which of the predefined coordinate systems the profile belongs
2344	DO k = 1, crmax
2345	IF ( INDEX( cross_profiles(k), ' '//TRIM( data_output_pr(i) )//' ' ) &
2346	/=0 ) &
2347	THEN
2348	dopr_crossindex(i) = k
2349	EXIT
2350	ENDIF
2351	ENDDO
2352	!
2353	!-- Generate the text for the labels of the PROFIL output file. "-characters
2354	!-- must be substituted, otherwise PROFIL would interpret them as TeX
2355	!-- control characters
2356	dopr_label(i) = data_output_pr(i)
2357	position = INDEX( dopr_label(i) , '"' )
2358	DO WHILE ( position /= 0 )
2359	dopr_label(i)(position:position) = ''''
2360	position = INDEX( dopr_label(i) , '"' )
2361	ENDDO
2362
2363	ENDDO
2364
2365	!
2366	!-- y-value range of the coordinate system (PROFIL).
2367	!-- x-value range determined in plot_1d.
2368	IF ( .NOT. ocean ) THEN
2369	cross_uymin = 0.0
2370	IF ( z_max_do1d == -1.0 ) THEN
2371	cross_uymax = zu(nzt+1)
2372	ELSEIF ( z_max_do1d < zu(nzb+1) .OR. z_max_do1d > zu(nzt+1) ) THEN
2373	WRITE( message_string, * ) 'z_max_do1d = ', z_max_do1d, ' must ', &
2374	'be >= ', zu(nzb+1), ' or <= ', zu(nzt+1)
2375	CALL message( 'check_parameters', 'PA0099', 1, 2, 0, 6, 0 )
2376	ELSE
2377	cross_uymax = z_max_do1d
2378	ENDIF
2379	ENDIF
2380
2381	!
2382	!-- Check whether the chosen normalizing factor for the coordinate systems is
2383	!-- permissible
2384	DO i = 1, crmax
2385	SELECT CASE ( TRIM( cross_normalized_x(i) ) ) ! TRIM required on IBM
2386
2387	CASE ( '', 'wpt0', 'ws2', 'tsw2', 'ws3', 'ws2tsw', 'wstsw2' )
2388	j = 0
2389
2390	CASE DEFAULT
2391	message_string = 'unknown normalization method cross_normali' // &
2392	'zed_x = "' // TRIM( cross_normalized_x(i) ) // &
2393	'"'
2394	CALL message( 'check_parameters', 'PA0100', 1, 2, 0, 6, 0 )
2395
2396	END SELECT
2397	SELECT CASE ( TRIM( cross_normalized_y(i) ) ) ! TRIM required on IBM
2398
2399	CASE ( '', 'z_i' )
2400	j = 0
2401
2402	CASE DEFAULT
2403	message_string = 'unknown normalization method cross_normali' // &
2404	'zed_y = "' // TRIM( cross_normalized_y(i) ) // &
2405	'"'
2406	CALL message( 'check_parameters', 'PA0101', 1, 2, 0, 6, 0 )
2407
2408	END SELECT
2409	ENDDO
2410	!
2411	!-- Check normalized y-value range of the coordinate system (PROFIL)
2412	IF ( z_max_do1d_normalized /= -1.0 .AND. z_max_do1d_normalized <= 0.0 ) &
2413	THEN
2414	WRITE( message_string, * ) 'z_max_do1d_normalized = ', &
2415	z_max_do1d_normalized, ' must be >= 0.0'
2416	CALL message( 'check_parameters', 'PA0101', 1, 2, 0, 6, 0 )
2417	ENDIF
2418
2419
2420	!
2421	!-- Append user-defined data output variables to the standard data output
2422	IF ( data_output_user(1) /= ' ' ) THEN
2423	i = 1
2424	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
2425	i = i + 1
2426	ENDDO
2427	j = 1
2428	DO WHILE ( data_output_user(j) /= ' ' .AND. j <= 100 )
2429	IF ( i > 100 ) THEN
2430	message_string = 'number of output quantitities given by data' // &
2431	'_output and data_output_user exceeds the limit of 100'
2432	CALL message( 'check_parameters', 'PA0102', 1, 2, 0, 6, 0 )
2433	ENDIF
2434	data_output(i) = data_output_user(j)
2435	i = i + 1
2436	j = j + 1
2437	ENDDO
2438	ENDIF
2439
2440	!
2441	!-- Check and set steering parameters for 2d/3d data output and averaging
2442	i = 1
2443	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
2444	!
2445	!-- Check for data averaging
2446	ilen = LEN_TRIM( data_output(i) )
2447	j = 0 ! no data averaging
2448	IF ( ilen > 3 ) THEN
2449	IF ( data_output(i)(ilen-2:ilen) == '_av' ) THEN
2450	j = 1 ! data averaging
2451	data_output(i) = data_output(i)(1:ilen-3)
2452	ENDIF
2453	ENDIF
2454	!
2455	!-- Check for cross section or volume data
2456	ilen = LEN_TRIM( data_output(i) )
2457	k = 0 ! 3d data
2458	var = data_output(i)(1:ilen)
2459	IF ( ilen > 3 ) THEN
2460	IF ( data_output(i)(ilen-2:ilen) == '_xy' .OR. &
2461	data_output(i)(ilen-2:ilen) == '_xz' .OR. &
2462	data_output(i)(ilen-2:ilen) == '_yz' ) THEN
2463	k = 1 ! 2d data
2464	var = data_output(i)(1:ilen-3)
2465	ENDIF
2466	ENDIF
2467	!
2468	!-- Check for allowed value and set units
2469	SELECT CASE ( TRIM( var ) )
2470
2471	CASE ( 'e' )
2472	IF ( constant_diffusion ) THEN
2473	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2474	'res constant_diffusion = .FALSE.'
2475	CALL message( 'check_parameters', 'PA0103', 1, 2, 0, 6, 0 )
2476	ENDIF
2477	unit = 'm2/s2'
2478
2479	CASE ( 'pc', 'pr' )
2480	IF ( .NOT. particle_advection ) THEN
2481	message_string = 'output of "' // TRIM( var ) // '" requir' // &
2482	'es a "particles_par"-NAMELIST in the parameter file (PARIN)'
2483	CALL message( 'check_parameters', 'PA0104', 1, 2, 0, 6, 0 )
2484	ENDIF
2485	IF ( TRIM( var ) == 'pc' ) unit = 'number'
2486	IF ( TRIM( var ) == 'pr' ) unit = 'm'
2487
2488	CASE ( 'q', 'vpt' )
2489	IF ( .NOT. humidity ) THEN
2490	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2491	'res humidity = .TRUE.'
2492	CALL message( 'check_parameters', 'PA0105', 1, 2, 0, 6, 0 )
2493	ENDIF
2494	IF ( TRIM( var ) == 'q' ) unit = 'kg/kg'
2495	IF ( TRIM( var ) == 'vpt' ) unit = 'K'
2496
2497	CASE ( 'ql' )
2498	IF ( .NOT. ( cloud_physics .OR. cloud_droplets ) ) THEN
2499	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2500	'res cloud_physics = .TRUE. or cloud_droplets = .TRUE.'
2501	CALL message( 'check_parameters', 'PA0106', 1, 2, 0, 6, 0 )
2502	ENDIF
2503	unit = 'kg/kg'
2504
2505	CASE ( 'ql_c', 'ql_v', 'ql_vp' )
2506	IF ( .NOT. cloud_droplets ) THEN
2507	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2508	'res cloud_droplets = .TRUE.'
2509	CALL message( 'check_parameters', 'PA0107', 1, 2, 0, 6, 0 )
2510	ENDIF
2511	IF ( TRIM( var ) == 'ql_c' ) unit = 'kg/kg'
2512	IF ( TRIM( var ) == 'ql_v' ) unit = 'm3'
2513	IF ( TRIM( var ) == 'ql_vp' ) unit = 'none'
2514
2515	CASE ( 'qv' )
2516	IF ( .NOT. cloud_physics ) THEN
2517	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2518	'res cloud_physics = .TRUE.'
2519	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2520	ENDIF
2521	unit = 'kg/kg'
2522
2523	CASE ( 'rho' )
2524	IF ( .NOT. ocean ) THEN
2525	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2526	'res ocean = .TRUE.'
2527	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
2528	ENDIF
2529	unit = 'kg/m3'
2530
2531	CASE ( 's' )
2532	IF ( .NOT. passive_scalar ) THEN
2533	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2534	'res passive_scalar = .TRUE.'
2535	CALL message( 'check_parameters', 'PA0110', 1, 2, 0, 6, 0 )
2536	ENDIF
2537	unit = 'conc'
2538
2539	CASE ( 'sa' )
2540	IF ( .NOT. ocean ) THEN
2541	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2542	'res ocean = .TRUE.'
2543	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
2544	ENDIF
2545	unit = 'psu'
2546
2547	CASE ( 'u', 't', 'lwp', 'pra', 'prr', 'qsws', 'shf', 'z0' )
2548	IF ( k == 0 .OR. data_output(i)(ilen-2:ilen) /= '_xy' ) THEN
2549	message_string = 'illegal value for data_output: "' // &
2550	TRIM( var ) // '" & only 2d-horizontal ' // &
2551	'cross sections are allowed for this value'
2552	CALL message( 'check_parameters', 'PA0111', 1, 2, 0, 6, 0 )
2553	ENDIF
2554	IF ( TRIM( var ) == 'lwp*' .AND. .NOT. cloud_physics ) THEN
2555	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2556	'res cloud_physics = .TRUE.'
2557	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2558	ENDIF
2559	IF ( TRIM( var ) == 'pra*' .AND. .NOT. precipitation ) THEN
2560	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2561	'res precipitation = .TRUE.'
2562	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2563	ENDIF
2564	IF ( TRIM( var ) == 'pra*' .AND. j == 1 ) THEN
2565	message_string = 'temporal averaging of precipitation ' // &
2566	'amount "' // TRIM( var ) // '" is not possible'
2567	CALL message( 'check_parameters', 'PA0113', 1, 2, 0, 6, 0 )
2568	ENDIF
2569	IF ( TRIM( var ) == 'prr*' .AND. .NOT. precipitation ) THEN
2570	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2571	'res precipitation = .TRUE.'
2572	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2573	ENDIF
2574	IF ( TRIM( var ) == 'qsws*' .AND. .NOT. humidity ) THEN
2575	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2576	'res humidity = .TRUE.'
2577	CALL message( 'check_parameters', 'PA0322', 1, 2, 0, 6, 0 )
2578	ENDIF
2579
2580	IF ( TRIM( var ) == 'lwp' ) unit = 'kg/kgm'
2581	IF ( TRIM( var ) == 'pra*' ) unit = 'mm'
2582	IF ( TRIM( var ) == 'prr*' ) unit = 'mm/s'
2583	IF ( TRIM( var ) == 'qsws*' ) unit = 'kgm/kgs'
2584	IF ( TRIM( var ) == 'shf' ) unit = 'Km/s'
2585	IF ( TRIM( var ) == 't*' ) unit = 'K'
2586	IF ( TRIM( var ) == 'u*' ) unit = 'm/s'
2587	IF ( TRIM( var ) == 'z0*' ) unit = 'm'
2588
2589
2590	CASE ( 'p', 'pt', 'u', 'v', 'w' )
2591	IF ( TRIM( var ) == 'p' ) unit = 'Pa'
2592	IF ( TRIM( var ) == 'pt' ) unit = 'K'
2593	IF ( TRIM( var ) == 'u' ) unit = 'm/s'
2594	IF ( TRIM( var ) == 'v' ) unit = 'm/s'
2595	IF ( TRIM( var ) == 'w' ) unit = 'm/s'
2596	CONTINUE
2597
2598	CASE DEFAULT
2599	CALL user_check_data_output( var, unit )
2600
2601	IF ( unit == 'illegal' ) THEN
2602	IF ( data_output_user(1) /= ' ' ) THEN
2603	message_string = 'illegal value for data_output or ' // &
2604	'data_output_user = "' // TRIM( data_output(i) ) // '"'
2605	CALL message( 'check_parameters', 'PA0114', 1, 2, 0, 6, 0 )
2606	ELSE
2607	message_string = 'illegal value for data_output =' // &
2608	TRIM( data_output(i) ) // '"'
2609	CALL message( 'check_parameters', 'PA0115', 1, 2, 0, 6, 0 )
2610	ENDIF
2611	ENDIF
2612
2613	END SELECT
2614	!
2615	!-- Set the internal steering parameters appropriately
2616	IF ( k == 0 ) THEN
2617	do3d_no(j) = do3d_no(j) + 1
2618	do3d(j,do3d_no(j)) = data_output(i)
2619	do3d_unit(j,do3d_no(j)) = unit
2620	ELSE
2621	do2d_no(j) = do2d_no(j) + 1
2622	do2d(j,do2d_no(j)) = data_output(i)
2623	do2d_unit(j,do2d_no(j)) = unit
2624	IF ( data_output(i)(ilen-2:ilen) == '_xy' ) THEN
2625	data_output_xy(j) = .TRUE.
2626	ENDIF
2627	IF ( data_output(i)(ilen-2:ilen) == '_xz' ) THEN
2628	data_output_xz(j) = .TRUE.
2629	ENDIF
2630	IF ( data_output(i)(ilen-2:ilen) == '_yz' ) THEN
2631	data_output_yz(j) = .TRUE.
2632	ENDIF
2633	ENDIF
2634
2635	IF ( j == 1 ) THEN
2636	!
2637	!-- Check, if variable is already subject to averaging
2638	found = .FALSE.
2639	DO k = 1, doav_n
2640	IF ( TRIM( doav(k) ) == TRIM( var ) ) found = .TRUE.
2641	ENDDO
2642
2643	IF ( .NOT. found ) THEN
2644	doav_n = doav_n + 1
2645	doav(doav_n) = var
2646	ENDIF
2647	ENDIF
2648
2649	i = i + 1
2650	ENDDO
2651
2652	!
2653	!-- Averaged 2d or 3d output requires that an averaging interval has been set
2654	IF ( doav_n > 0 .AND. averaging_interval == 0.0 ) THEN
2655	WRITE( message_string, * ) 'output of averaged quantity "', &
2656	TRIM( doav(1) ), '_av" requires to set a ', &
2657	'non-zero & averaging interval'
2658	CALL message( 'check_parameters', 'PA0323', 1, 2, 0, 6, 0 )
2659	ENDIF
2660
2661	!
2662	!-- Check sectional planes and store them in one shared array
2663	IF ( ANY( section_xy > nz + 1 ) ) THEN
2664	WRITE( message_string, * ) 'section_xy must be <= nz + 1 = ', nz + 1
2665	CALL message( 'check_parameters', 'PA0319', 1, 2, 0, 6, 0 )
2666	ENDIF
2667	IF ( ANY( section_xz > ny + 1 ) ) THEN
2668	WRITE( message_string, * ) 'section_xz must be <= ny + 1 = ', ny + 1
2669	CALL message( 'check_parameters', 'PA0320', 1, 2, 0, 6, 0 )
2670	ENDIF
2671	IF ( ANY( section_yz > nx + 1 ) ) THEN
2672	WRITE( message_string, * ) 'section_yz must be <= nx + 1 = ', nx + 1
2673	CALL message( 'check_parameters', 'PA0321', 1, 2, 0, 6, 0 )
2674	ENDIF
2675	section(:,1) = section_xy
2676	section(:,2) = section_xz
2677	section(:,3) = section_yz
2678
2679	!
2680	!-- Upper plot limit (grid point value) for 1D profiles
2681	IF ( z_max_do1d == -1.0 ) THEN
2682
2683	nz_do1d = nzt+1
2684
2685	ELSE
2686	DO k = nzb+1, nzt+1
2687	nz_do1d = k
2688	IF ( zw(k) > z_max_do1d ) EXIT
2689	ENDDO
2690	ENDIF
2691
2692	!
2693	!-- Upper plot limit for 2D vertical sections
2694	IF ( z_max_do2d == -1.0 ) z_max_do2d = zu(nzt)
2695	IF ( z_max_do2d < zu(nzb+1) .OR. z_max_do2d > zu(nzt) ) THEN
2696	WRITE( message_string, * ) 'z_max_do2d = ', z_max_do2d, &
2697	' must be >= ', zu(nzb+1), '(zu(nzb+1)) and <= ', zu(nzt), &
2698	' (zu(nzt))'
2699	CALL message( 'check_parameters', 'PA0116', 1, 2, 0, 6, 0 )
2700	ENDIF
2701
2702	!
2703	!-- Upper plot limit for 3D arrays
2704	IF ( nz_do3d == -9999 ) nz_do3d = nzt + 1
2705
2706	!
2707	!-- Determine and check accuracy for compressed 3D plot output
2708	IF ( do3d_compress ) THEN
2709	!
2710	!-- Compression only permissible on T3E machines
2711	IF ( host(1:3) /= 't3e' ) THEN
2712	message_string = 'do3d_compress = .TRUE. not allowed on host "' // &
2713	TRIM( host ) // '"'
2714	CALL message( 'check_parameters', 'PA0117', 1, 2, 0, 6, 0 )
2715	ENDIF
2716
2717	i = 1
2718	DO WHILE ( do3d_comp_prec(i) /= ' ' )
2719
2720	ilen = LEN_TRIM( do3d_comp_prec(i) )
2721	IF ( LLT( do3d_comp_prec(i)(ilen:ilen), '0' ) .OR. &
2722	LGT( do3d_comp_prec(i)(ilen:ilen), '9' ) ) THEN
2723	WRITE( message_string, * ) 'illegal precision: do3d_comp_prec', &
2724	'(', i, ') = "', TRIM(do3d_comp_prec(i)),'"'
2725	CALL message( 'check_parameters', 'PA0118', 1, 2, 0, 6, 0 )
2726	ENDIF
2727
2728	prec = IACHAR( do3d_comp_prec(i)(ilen:ilen) ) - IACHAR( '0' )
2729	var = do3d_comp_prec(i)(1:ilen-1)
2730
2731	SELECT CASE ( var )
2732
2733	CASE ( 'u' )
2734	j = 1
2735	CASE ( 'v' )
2736	j = 2
2737	CASE ( 'w' )
2738	j = 3
2739	CASE ( 'p' )
2740	j = 4
2741	CASE ( 'pt' )
2742	j = 5
2743
2744	CASE DEFAULT
2745	WRITE( message_string, * ) 'unknown variable "', &
2746	TRIM( do3d_comp_prec(i) ), '" given for do3d_comp_prec(', &
2747	i, ')'
2748	CALL message( 'check_parameters', 'PA0119', 1, 2, 0, 6, 0 )
2749
2750	END SELECT
2751
2752	plot_3d_precision(j)%precision = prec
2753	i = i + 1
2754
2755	ENDDO
2756	ENDIF
2757
2758	!
2759	!-- Check the data output format(s)
2760	IF ( data_output_format(1) == ' ' ) THEN
2761	!
2762	!-- Default value
2763	netcdf_output = .TRUE.
2764	ELSE
2765	i = 1
2766	DO WHILE ( data_output_format(i) /= ' ' )
2767
2768	SELECT CASE ( data_output_format(i) )
2769
2770	CASE ( 'netcdf' )
2771	netcdf_output = .TRUE.
2772	CASE ( 'iso2d' )
2773	iso2d_output = .TRUE.
2774	CASE ( 'profil' )
2775	profil_output = .TRUE.
2776	CASE ( 'avs' )
2777	avs_output = .TRUE.
2778
2779	CASE DEFAULT
2780	message_string = 'unknown value for data_output_format "' // &
2781	TRIM( data_output_format(i) ) // '"'
2782	CALL message( 'check_parameters', 'PA0120', 1, 2, 0, 6, 0 )
2783
2784	END SELECT
2785
2786	i = i + 1
2787	IF ( i > 10 ) EXIT
2788
2789	ENDDO
2790
2791	ENDIF
2792
2793	!
2794	!-- Check mask conditions
2795	DO mid = 1, max_masks
2796	IF ( data_output_masks(mid,1) /= ' ' .OR. &
2797	data_output_masks_user(mid,1) /= ' ' ) THEN
2798	masks = masks + 1
2799	ENDIF
2800	ENDDO
2801
2802	IF ( masks < 0 .OR. masks > max_masks ) THEN
2803	WRITE( message_string, * ) 'illegal value: masks must be >= 0 and ', &
2804	'<= ', max_masks, ' (=max_masks)'
2805	CALL message( 'check_parameters', 'PA0325', 1, 2, 0, 6, 0 )
2806	ENDIF
2807	IF ( masks > 0 ) THEN
2808	mask_scale(1) = mask_scale_x
2809	mask_scale(2) = mask_scale_y
2810	mask_scale(3) = mask_scale_z
2811	IF ( ANY( mask_scale <= 0.0 ) ) THEN
2812	WRITE( message_string, * ) &
2813	'illegal value: mask_scale_x, mask_scale_y and mask_scale_z', &
2814	'must be > 0.0'
2815	CALL message( 'check_parameters', 'PA0326', 1, 2, 0, 6, 0 )
2816	ENDIF
2817	!
2818	!-- Generate masks for masked data output
2819	CALL init_masks
2820	ENDIF
2821
2822	!
2823	!-- Check the NetCDF data format
2824	IF ( netcdf_data_format > 2 ) THEN
2825	#if defined( __netcdf4 )
2826	CONTINUE
2827	#else
2828	message_string = 'NetCDF: NetCDF4 format requested but no ' // &
2829	'cpp-directive __netcdf4 given & switch ' // &
2830	'back to 64-bit offset format'
2831	CALL message( 'check_parameters', 'PA0171', 0, 1, 0, 6, 0 )
2832	netcdf_data_format = 2
2833	#endif
2834	ENDIF
2835
2836	!
2837
2838	!-- Check netcdf precison
2839	ldum = .FALSE.
2840	CALL define_netcdf_header( 'ch', ldum, 0 )
2841
2842	!
2843	!-- Check, whether a constant diffusion coefficient shall be used
2844	IF ( km_constant /= -1.0 ) THEN
2845	IF ( km_constant < 0.0 ) THEN
2846	WRITE( message_string, * ) 'km_constant = ', km_constant, ' < 0.0'
2847	CALL message( 'check_parameters', 'PA0121', 1, 2, 0, 6, 0 )
2848	ELSE
2849	IF ( prandtl_number < 0.0 ) THEN
2850	WRITE( message_string, * ) 'prandtl_number = ', prandtl_number, &
2851	' < 0.0'
2852	CALL message( 'check_parameters', 'PA0122', 1, 2, 0, 6, 0 )
2853	ENDIF
2854	constant_diffusion = .TRUE.
2855
2856	IF ( prandtl_layer ) THEN
2857	message_string = 'prandtl_layer is not allowed with fixed ' // &
2858	'value of km'
2859	CALL message( 'check_parameters', 'PA0123', 1, 2, 0, 6, 0 )
2860	ENDIF
2861	ENDIF
2862	ENDIF
2863
2864	!
2865	!-- In case of non-cyclic lateral boundaries, set the default maximum value
2866	!-- for the horizontal diffusivity used within the outflow damping layer,
2867	!-- and check/set the width of the damping layer
2868	IF ( bc_lr /= 'cyclic' ) THEN
2869	IF ( km_damp_max == -1.0 ) THEN
2870	km_damp_max = 0.5 * dx
2871	ENDIF
2872	IF ( outflow_damping_width == -1.0 ) THEN
2873	outflow_damping_width = MIN( 20, nx/2 )
2874	ENDIF
2875	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > nx ) THEN
2876	message_string = 'outflow_damping width out of range'
2877	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
2878	ENDIF
2879	ENDIF
2880
2881	IF ( bc_ns /= 'cyclic' ) THEN
2882	IF ( km_damp_max == -1.0 ) THEN
2883	km_damp_max = 0.5 * dy
2884	ENDIF
2885	IF ( outflow_damping_width == -1.0 ) THEN
2886	outflow_damping_width = MIN( 20, ny/2 )
2887	ENDIF
2888	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > ny ) THEN
2889	message_string = 'outflow_damping width out of range'
2890	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
2891	ENDIF
2892	ENDIF
2893
2894	!
2895	!-- Check value range for rif
2896	IF ( rif_min >= rif_max ) THEN
2897	WRITE( message_string, * ) 'rif_min = ', rif_min, ' must be less ', &
2898	'than rif_max = ', rif_max
2899	CALL message( 'check_parameters', 'PA0125', 1, 2, 0, 6, 0 )
2900	ENDIF
2901
2902	!
2903	!-- Determine upper and lower hight level indices for random perturbations
2904	IF ( disturbance_level_b == -9999999.9 ) THEN
2905	IF ( ocean ) THEN
2906	disturbance_level_b = zu((nzt*2)/3)
2907	disturbance_level_ind_b = ( nzt * 2 ) / 3
2908	ELSE
2909	disturbance_level_b = zu(nzb+3)
2910	disturbance_level_ind_b = nzb + 3
2911	ENDIF
2912	ELSEIF ( disturbance_level_b < zu(3) ) THEN
2913	WRITE( message_string, * ) 'disturbance_level_b = ', &
2914	disturbance_level_b, ' must be >= ', zu(3), '(zu(3))'
2915	CALL message( 'check_parameters', 'PA0126', 1, 2, 0, 6, 0 )
2916	ELSEIF ( disturbance_level_b > zu(nzt-2) ) THEN
2917	WRITE( message_string, * ) 'disturbance_level_b = ', &
2918	disturbance_level_b, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
2919	CALL message( 'check_parameters', 'PA0127', 1, 2, 0, 6, 0 )
2920	ELSE
2921	DO k = 3, nzt-2
2922	IF ( disturbance_level_b <= zu(k) ) THEN
2923	disturbance_level_ind_b = k
2924	EXIT
2925	ENDIF
2926	ENDDO
2927	ENDIF
2928
2929	IF ( disturbance_level_t == -9999999.9 ) THEN
2930	IF ( ocean ) THEN
2931	disturbance_level_t = zu(nzt-3)
2932	disturbance_level_ind_t = nzt - 3
2933	ELSE
2934	disturbance_level_t = zu(nzt/3)
2935	disturbance_level_ind_t = nzt / 3
2936	ENDIF
2937	ELSEIF ( disturbance_level_t > zu(nzt-2) ) THEN
2938	WRITE( message_string, * ) 'disturbance_level_t = ', &
2939	disturbance_level_t, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
2940	CALL message( 'check_parameters', 'PA0128', 1, 2, 0, 6, 0 )
2941	ELSEIF ( disturbance_level_t < disturbance_level_b ) THEN
2942	WRITE( message_string, * ) 'disturbance_level_t = ', &
2943	disturbance_level_t, ' must be >= disturbance_level_b = ', &
2944	disturbance_level_b
2945	CALL message( 'check_parameters', 'PA0129', 1, 2, 0, 6, 0 )
2946	ELSE
2947	DO k = 3, nzt-2
2948	IF ( disturbance_level_t <= zu(k) ) THEN
2949	disturbance_level_ind_t = k
2950	EXIT
2951	ENDIF
2952	ENDDO
2953	ENDIF
2954
2955	!
2956	!-- Check again whether the levels determined this way are ok.
2957	!-- Error may occur at automatic determination and too few grid points in
2958	!-- z-direction.
2959	IF ( disturbance_level_ind_t < disturbance_level_ind_b ) THEN
2960	WRITE( message_string, * ) 'disturbance_level_ind_t = ', &
2961	disturbance_level_ind_t, ' must be >= disturbance_level_b = ', &
2962	disturbance_level_b
2963	CALL message( 'check_parameters', 'PA0130', 1, 2, 0, 6, 0 )
2964	ENDIF
2965
2966	!
2967	!-- Determine the horizontal index range for random perturbations.
2968	!-- In case of non-cyclic horizontal boundaries, no perturbations are imposed
2969	!-- near the inflow and the perturbation area is further limited to ...(1)
2970	!-- after the initial phase of the flow.
2971	dist_nxl = 0; dist_nxr = nx
2972	dist_nys = 0; dist_nyn = ny
2973	IF ( bc_lr /= 'cyclic' ) THEN
2974	IF ( inflow_disturbance_begin == -1 ) THEN
2975	inflow_disturbance_begin = MIN( 10, nx/2 )
2976	ENDIF
2977	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > nx )&
2978	THEN
2979	message_string = 'inflow_disturbance_begin out of range'
2980	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
2981	ENDIF
2982	IF ( inflow_disturbance_end == -1 ) THEN
2983	inflow_disturbance_end = MIN( 100, 3*nx/4 )
2984	ENDIF
2985	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > nx ) &
2986	THEN
2987	message_string = 'inflow_disturbance_end out of range'
2988	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
2989	ENDIF
2990	ELSEIF ( bc_ns /= 'cyclic' ) THEN
2991	IF ( inflow_disturbance_begin == -1 ) THEN
2992	inflow_disturbance_begin = MIN( 10, ny/2 )
2993	ENDIF
2994	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > ny )&
2995	THEN
2996	message_string = 'inflow_disturbance_begin out of range'
2997	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
2998	ENDIF
2999	IF ( inflow_disturbance_end == -1 ) THEN
3000	inflow_disturbance_end = MIN( 100, 3*ny/4 )
3001	ENDIF
3002	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > ny ) &
3003	THEN
3004	message_string = 'inflow_disturbance_end out of range'
3005	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
3006	ENDIF
3007	ENDIF
3008
3009	IF ( bc_lr == 'radiation/dirichlet' ) THEN
3010	dist_nxr = nx - inflow_disturbance_begin
3011	dist_nxl(1) = nx - inflow_disturbance_end
3012	ELSEIF ( bc_lr == 'dirichlet/radiation' ) THEN
3013	dist_nxl = inflow_disturbance_begin
3014	dist_nxr(1) = inflow_disturbance_end
3015	ENDIF
3016	IF ( bc_ns == 'dirichlet/radiation' ) THEN
3017	dist_nyn = ny - inflow_disturbance_begin
3018	dist_nys(1) = ny - inflow_disturbance_end
3019	ELSEIF ( bc_ns == 'radiation/dirichlet' ) THEN
3020	dist_nys = inflow_disturbance_begin
3021	dist_nyn(1) = inflow_disturbance_end
3022	ENDIF
3023
3024	!
3025	!-- A turbulent inflow requires Dirichlet conditions at the respective inflow
3026	!-- boundary (so far, a turbulent inflow is realized from the left side only)
3027	IF ( turbulent_inflow .AND. bc_lr /= 'dirichlet/radiation' ) THEN
3028	message_string = 'turbulent_inflow = .T. requires a Dirichlet ' // &
3029	'condition at the inflow boundary'
3030	CALL message( 'check_parameters', 'PA0133', 1, 2, 0, 6, 0 )
3031	ENDIF
3032
3033	!
3034	!-- In case of turbulent inflow calculate the index of the recycling plane
3035	IF ( turbulent_inflow ) THEN
3036	IF ( recycling_width == 9999999.9 ) THEN
3037	!
3038	!-- Set the default value for the width of the recycling domain
3039	recycling_width = 0.1 * nx * dx
3040	ELSE
3041	IF ( recycling_width < dx .OR. recycling_width > nx * dx ) THEN
3042	WRITE( message_string, * ) 'illegal value for recycling_width:', &
3043	' ', recycling_width
3044	CALL message( 'check_parameters', 'PA0134', 1, 2, 0, 6, 0 )
3045	ENDIF
3046	ENDIF
3047	!
3048	!-- Calculate the index
3049	recycling_plane = recycling_width / dx
3050	ENDIF
3051
3052	!
3053	!-- Check random generator
3054	IF ( random_generator /= 'system-specific' .AND. &
3055	random_generator /= 'numerical-recipes' ) THEN
3056	message_string = 'unknown random generator: random_generator = "' // &
3057	TRIM( random_generator ) // '"'
3058	CALL message( 'check_parameters', 'PA0135', 1, 2, 0, 6, 0 )
3059	ENDIF
3060
3061	!
3062	!-- Determine damping level index for 1D model
3063	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
3064	IF ( damp_level_1d == -1.0 ) THEN
3065	damp_level_1d = zu(nzt+1)
3066	damp_level_ind_1d = nzt + 1
3067	ELSEIF ( damp_level_1d < 0.0 .OR. damp_level_1d > zu(nzt+1) ) THEN
3068	WRITE( message_string, * ) 'damp_level_1d = ', damp_level_1d, &
3069	' must be > 0.0 and < ', zu(nzt+1), '(zu(nzt+1))'
3070	CALL message( 'check_parameters', 'PA0136', 1, 2, 0, 6, 0 )
3071	ELSE
3072	DO k = 1, nzt+1
3073	IF ( damp_level_1d <= zu(k) ) THEN
3074	damp_level_ind_1d = k
3075	EXIT
3076	ENDIF
3077	ENDDO
3078	ENDIF
3079	ENDIF
3080
3081	!
3082	!-- Check some other 1d-model parameters
3083	IF ( TRIM( mixing_length_1d ) /= 'as_in_3d_model' .AND. &
3084	TRIM( mixing_length_1d ) /= 'blackadar' ) THEN
3085	message_string = 'mixing_length_1d = "' // TRIM( mixing_length_1d ) // &
3086	'" is unknown'
3087	CALL message( 'check_parameters', 'PA0137', 1, 2, 0, 6, 0 )
3088	ENDIF
3089	IF ( TRIM( dissipation_1d ) /= 'as_in_3d_model' .AND. &
3090	TRIM( dissipation_1d ) /= 'detering' ) THEN
3091	message_string = 'dissipation_1d = "' // TRIM( dissipation_1d ) // &
3092	'" is unknown'
3093	CALL message( 'check_parameters', 'PA0138', 1, 2, 0, 6, 0 )
3094	ENDIF
3095
3096	!
3097	!-- Set time for the next user defined restart (time_restart is the
3098	!-- internal parameter for steering restart events)
3099	IF ( restart_time /= 9999999.9 ) THEN
3100	IF ( restart_time > time_since_reference_point ) THEN
3101	time_restart = restart_time
3102	ENDIF
3103	ELSE
3104	!
3105	!-- In case of a restart run, set internal parameter to default (no restart)
3106	!-- if the NAMELIST-parameter restart_time is omitted
3107	time_restart = 9999999.9
3108	ENDIF
3109
3110	!
3111	!-- Set default value of the time needed to terminate a model run
3112	IF ( termination_time_needed == -1.0 ) THEN
3113	IF ( host(1:3) == 'ibm' ) THEN
3114	termination_time_needed = 300.0
3115	ELSE
3116	termination_time_needed = 35.0
3117	ENDIF
3118	ENDIF
3119
3120	!
3121	!-- Check the time needed to terminate a model run
3122	IF ( host(1:3) == 't3e' ) THEN
3123	!
3124	!-- Time needed must be at least 30 seconds on all CRAY machines, because
3125	!-- MPP_TREMAIN gives the remaining CPU time only in steps of 30 seconds
3126	IF ( termination_time_needed <= 30.0 ) THEN
3127	WRITE( message_string, * ) 'termination_time_needed = ', &
3128	termination_time_needed, ' must be > 30.0 on host "', &
3129	TRIM( host ), '"'
3130	CALL message( 'check_parameters', 'PA0139', 1, 2, 0, 6, 0 )
3131	ENDIF
3132	ELSEIF ( host(1:3) == 'ibm' ) THEN
3133	!
3134	!-- On IBM-regatta machines the time should be at least 300 seconds,
3135	!-- because the job time consumed before executing palm (for compiling,
3136	!-- copying of files, etc.) has to be regarded
3137	IF ( termination_time_needed < 300.0 ) THEN
3138	WRITE( message_string, * ) 'termination_time_needed = ', &
3139	termination_time_needed, ' should be >= 300.0 on host "', &
3140	TRIM( host ), '"'
3141	CALL message( 'check_parameters', 'PA0140', 1, 2, 0, 6, 0 )
3142	ENDIF
3143	ENDIF
3144
3145	!
3146	!-- Check pressure gradient conditions
3147	IF ( dp_external .AND. conserve_volume_flow ) THEN
3148	WRITE( message_string, * ) 'Both dp_external and conserve_volume_flo', &
3149	'w are .TRUE. but one of them must be .FALSE.'
3150	CALL message( 'check_parameters', 'PA0150', 1, 2, 0, 6, 0 )
3151	ENDIF
3152	IF ( dp_external ) THEN
3153	IF ( dp_level_b < zu(nzb) .OR. dp_level_b > zu(nzt) ) THEN
3154	WRITE( message_string, * ) 'dp_level_b = ', dp_level_b, ' is out ', &
3155	' of range'
3156	CALL message( 'check_parameters', 'PA0151', 1, 2, 0, 6, 0 )
3157	ENDIF
3158	IF ( .NOT. ANY( dpdxy /= 0.0 ) ) THEN
3159	WRITE( message_string, * ) 'dp_external is .TRUE. but dpdxy is ze', &
3160	'ro, i.e. the external pressure gradient & will not be applied'
3161	CALL message( 'check_parameters', 'PA0152', 0, 1, 0, 6, 0 )
3162	ENDIF
3163	ENDIF
3164	IF ( ANY( dpdxy /= 0.0 ) .AND. .NOT. dp_external ) THEN
3165	WRITE( message_string, * ) 'dpdxy is nonzero but dp_external is ', &
3166	'.FALSE., i.e. the external pressure gradient & will not be applied'
3167	CALL message( 'check_parameters', 'PA0153', 0, 1, 0, 6, 0 )
3168	ENDIF
3169	IF ( conserve_volume_flow ) THEN
3170	IF ( TRIM( conserve_volume_flow_mode ) == 'default' ) THEN
3171
3172	conserve_volume_flow_mode = 'initial_profiles'
3173
3174	ELSEIF ( TRIM( conserve_volume_flow_mode ) /= 'initial_profiles' .AND. &
3175	TRIM( conserve_volume_flow_mode ) /= 'inflow_profile' .AND. &
3176	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) THEN
3177	WRITE( message_string, * ) 'unknown conserve_volume_flow_mode: ', &
3178	conserve_volume_flow_mode
3179	CALL message( 'check_parameters', 'PA0154', 1, 2, 0, 6, 0 )
3180	ENDIF
3181	IF ( (bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic') .AND. &
3182	TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
3183	WRITE( message_string, * ) 'non-cyclic boundary conditions ', &
3184	'require conserve_volume_flow_mode = ''initial_profiles'''
3185	CALL message( 'check_parameters', 'PA0155', 1, 2, 0, 6, 0 )
3186	ENDIF
3187	IF ( bc_lr == 'cyclic' .AND. bc_ns == 'cyclic' .AND. &
3188	TRIM( conserve_volume_flow_mode ) == 'inflow_profile' ) THEN
3189	WRITE( message_string, * ) 'cyclic boundary conditions ', &
3190	'require conserve_volume_flow_mode = ''initial_profiles''', &
3191	' or ''bulk_velocity'''
3192	CALL message( 'check_parameters', 'PA0156', 1, 2, 0, 6, 0 )
3193	ENDIF
3194	ENDIF
3195	IF ( ( u_bulk /= 0.0 .OR. v_bulk /= 0.0 ) .AND. &
3196	( .NOT. conserve_volume_flow .OR. &
3197	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) ) THEN
3198	WRITE( message_string, * ) 'nonzero bulk velocity requires ', &
3199	'conserve_volume_flow = .T. and ', &
3200	'conserve_volume_flow_mode = ''bulk_velocity'''
3201	CALL message( 'check_parameters', 'PA0157', 1, 2, 0, 6, 0 )
3202	ENDIF
3203
3204	!
3205	!-- Check particle attributes
3206	IF ( particle_color /= 'none' ) THEN
3207	IF ( particle_color /= 'absuv' .AND. particle_color /= 'pt*' .AND. &
3208	particle_color /= 'z' ) THEN
3209	message_string = 'illegal value for parameter particle_color: ' // &
3210	TRIM( particle_color)
3211	CALL message( 'check_parameters', 'PA0313', 1, 2, 0, 6, 0 )
3212	ELSE
3213	IF ( color_interval(2) <= color_interval(1) ) THEN
3214	message_string = 'color_interval(2) <= color_interval(1)'
3215	CALL message( 'check_parameters', 'PA0315', 1, 2, 0, 6, 0 )
3216	ENDIF
3217	ENDIF
3218	ENDIF
3219
3220	IF ( particle_dvrpsize /= 'none' ) THEN
3221	IF ( particle_dvrpsize /= 'absw' ) THEN
3222	message_string = 'illegal value for parameter particle_dvrpsize:' // &
3223	' ' // TRIM( particle_color)
3224	CALL message( 'check_parameters', 'PA0314', 1, 2, 0, 6, 0 )
3225	ELSE
3226	IF ( dvrpsize_interval(2) <= dvrpsize_interval(1) ) THEN
3227	message_string = 'dvrpsize_interval(2) <= dvrpsize_interval(1)'
3228	CALL message( 'check_parameters', 'PA0316', 1, 2, 0, 6, 0 )
3229	ENDIF
3230	ENDIF
3231	ENDIF
3232
3233	!
3234	!-- Check &userpar parameters
3235	CALL user_check_parameters
3236
3237
3238
3239	END SUBROUTINE check_parameters

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |