Home

Context Navigation

source: palm/trunk/SOURCE/check_parameters.f90 @ 568

Last change on this file since 568 was 568, checked in by helmke, 14 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 122.4 KB

Line
1	SUBROUTINE check_parameters
2
3	!------------------------------------------------------------------------------!
4	! Current revisions:
5	! -----------------
6	!
7	!
8	! Former revisions:
9	! -----------------
10	! $Id: check_parameters.f90 568 2010-10-01 10:50:49Z helmke $
11	!
12	! 567 2010-10-01 10:46:30Z helmke
13	! calculating masks changed
14	!
15	! 564 2010-09-30 13:18:59Z helmke
16	! palm message identifiers of masked output changed, 20 replaced by max_masks
17	!
18	! 553 2010-09-01 14:09:06Z weinreis
19	! masks is calculated and removed from inipar
20	!
21	! 531 2010-04-21 06:47:21Z heinze
22	! Bugfix: unit of hyp changed to dbar
23	!
24	! 524 2010-03-30 02:04:51Z raasch
25	! Bugfix: "/" in netcdf profile variable names replaced by ":"
26	!
27	! 493 2010-03-01 08:30:24Z raasch
28	! netcdf_data_format is checked
29	!
30	! 411 2009-12-11 14:15:58Z heinze
31	! Enabled passive scalar/humidity wall fluxes for non-flat topography
32	! Initialization of large scale vertical motion (subsidence/ascent)
33	!
34	! 410 2009-12-04 17:05:40Z letzel
35	! masked data output
36	!
37	! 388 2009-09-23 09:40:33Z raasch
38	! Check profiles fpr prho and hyp.
39	! Bugfix: output of averaged 2d/3d quantities requires that an avaraging
40	! interval has been set, respective error message is included
41	! bc_lr_cyc and bc_ns_cyc are set,
42	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
43	! Check for illegal entries in section_xy\|xz\|yz that exceed nz+1\|ny+1\|nx+1
44	! Coupling with independent precursor runs.
45	! Check particle_color, particle_dvrpsize, color_interval, dvrpsize_interval
46	! Bugfix: pressure included for profile output
47	! Check pressure gradient conditions
48	! topography_grid_convention moved from user_check_parameters
49	! 'single_street_canyon'
50	! Added shf* and qsws* to the list of available output data
51	!
52	! 222 2009-01-12 16:04:16Z letzel
53	! +user_check_parameters
54	! Output of messages replaced by message handling routine.
55	! Implementation of an MPI-1 coupling: replaced myid with target_id,
56	! deleted __mpi2 directives
57	! Check that PALM is called with mrun -K parallel for coupling
58	!
59	! 197 2008-09-16 15:29:03Z raasch
60	! Bug fix: Construction of vertical profiles when 10 gradients have been
61	! specified in the parameter list (ug, vg, pt, q, sa, lad)
62	!
63	! Strict grid matching along z is not needed for mg-solver.
64	! Leaf area density (LAD) explicitly set to its surface value at k=0
65	! Case of reading data for recycling included in initializing_actions,
66	! check of turbulent_inflow and calculation of recycling_plane.
67	! q*2 profile added
68	!
69	! 138 2007-11-28 10:03:58Z letzel
70	! Plant canopy added
71	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
72	! Multigrid solver allows topography, checking of dt_sort_particles
73	! Bugfix: initializing u_init and v_init in case of ocean runs
74	!
75	! 109 2007-08-28 15:26:47Z letzel
76	! Check coupling_mode and set default (obligatory) values (like boundary
77	! conditions for temperature and fluxes) in case of coupled runs.
78	! +profiles for wp and w"e
79	! Bugfix: Error message concerning output of particle concentration (pc)
80	! modified
81	! More checks and more default values for coupled runs
82	! allow data_output_pr= q, wq, w"q", wq for humidity = .T. (instead of
83	! cloud_physics = .T.)
84	! Rayleigh damping for ocean fixed.
85	! Check and, if necessary, set default value for dt_coupling
86	!
87	! 97 2007-06-21 08:23:15Z raasch
88	! Initial salinity profile is calculated, salinity boundary conditions are
89	! checked,
90	! z_max_do1d is checked only in case of ocean = .f.,
91	! +initial temperature and geostrophic velocity profiles for the ocean version,
92	! use_pt_reference renamed use_reference
93	!
94	! 89 2007-05-25 12:08:31Z raasch
95	! Check for user-defined profiles
96	!
97	! 75 2007-03-22 09:54:05Z raasch
98	! "by_user" allowed as initializing action, -data_output_ts,
99	! leapfrog with non-flat topography not allowed any more, loop_optimization
100	! and pt_reference are checked, moisture renamed humidity,
101	! output of precipitation amount/rate and roughnes length + check
102	! possible negative humidities are avoided in initial profile,
103	! dirichlet/neumann changed to dirichlet/radiation, etc.,
104	! revision added to run_description_header
105	!
106	! 20 2007-02-26 00:12:32Z raasch
107	! Temperature and humidity gradients at top are now calculated for nzt+1,
108	! top_heatflux and respective boundary condition bc_pt_t is checked
109	!
110	! RCS Log replace by Id keyword, revision history cleaned up
111	!
112	! Revision 1.61 2006/08/04 14:20:25 raasch
113	! do2d_unit and do3d_unit now defined as 2d-arrays, check of
114	! use_upstream_for_tke, default value for dt_dopts,
115	! generation of file header moved from routines palm and header to here
116	!
117	! Revision 1.1 1997/08/26 06:29:23 raasch
118	! Initial revision
119	!
120	!
121	! Description:
122	! ------------
123	! Check control parameters and deduce further quantities.
124	!------------------------------------------------------------------------------!
125
126	USE arrays_3d
127	USE constants
128	USE control_parameters
129	USE dvrp_variables
130	USE grid_variables
131	USE indices
132	USE model_1d
133	USE netcdf_control
134	USE particle_attributes
135	USE pegrid
136	USE profil_parameter
137	USE subsidence_mod
138	USE statistics
139	USE transpose_indices
140
141	IMPLICIT NONE
142
143	CHARACTER (LEN=1) :: sq
144	CHARACTER (LEN=6) :: var
145	CHARACTER (LEN=7) :: unit
146	CHARACTER (LEN=8) :: date
147	CHARACTER (LEN=10) :: time
148	CHARACTER (LEN=40) :: coupling_string
149	CHARACTER (LEN=100) :: action
150
151	INTEGER :: i, ilen, intervals, iremote = 0, iter, j, k, nnxh, nnyh, &
152	position, prec
153	LOGICAL :: found, ldum
154	REAL :: gradient, maxn, maxp, remote = 0.0, &
155	simulation_time_since_reference
156
157	!
158	!-- Warning, if host is not set
159	IF ( host(1:1) == ' ' ) THEN
160	message_string = '"host" is not set. Please check that environment ' // &
161	'variable "localhost" & is set before running PALM'
162	CALL message( 'check_parameters', 'PA0001', 0, 0, 0, 6, 0 )
163	ENDIF
164
165	!
166	!-- Check the coupling mode
167	IF ( coupling_mode /= 'uncoupled' .AND. &
168	coupling_mode /= 'atmosphere_to_ocean' .AND. &
169	coupling_mode /= 'ocean_to_atmosphere' ) THEN
170	message_string = 'illegal coupling mode: ' // TRIM( coupling_mode )
171	CALL message( 'check_parameters', 'PA0002', 1, 2, 0, 6, 0 )
172	ENDIF
173
174	!
175	!-- Check dt_coupling, restart_time, dt_restart, end_time, dx, dy, nx and ny
176	IF ( coupling_mode /= 'uncoupled' ) THEN
177
178	IF ( dt_coupling == 9999999.9 ) THEN
179	message_string = 'dt_coupling is not set but required for coup' // &
180	'ling mode "' // TRIM( coupling_mode ) // '"'
181	CALL message( 'check_parameters', 'PA0003', 1, 2, 0, 6, 0 )
182	ENDIF
183
184	#if defined( __parallel )
185	CALL MPI_SEND( dt_coupling, 1, MPI_REAL, target_id, 11, comm_inter, &
186	ierr )
187	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 11, comm_inter, &
188	status, ierr )
189	IF ( dt_coupling /= remote ) THEN
190	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
191	'": dt_coupling = ', dt_coupling, '& is not equal to ', &
192	'dt_coupling_remote = ', remote
193	CALL message( 'check_parameters', 'PA0004', 1, 2, 0, 6, 0 )
194	ENDIF
195	IF ( dt_coupling <= 0.0 ) THEN
196	CALL MPI_SEND( dt_max, 1, MPI_REAL, target_id, 19, comm_inter, ierr )
197	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 19, comm_inter, &
198	status, ierr )
199	dt_coupling = MAX( dt_max, remote )
200	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
201	'": dt_coupling <= 0.0 & is not allowed and is reset to ', &
202	'MAX(dt_max(A,O)) = ', dt_coupling
203	CALL message( 'check_parameters', 'PA0005', 0, 1, 0, 6, 0 )
204	ENDIF
205
206	CALL MPI_SEND( restart_time, 1, MPI_REAL, target_id, 12, comm_inter, &
207	ierr )
208	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 12, comm_inter, &
209	status, ierr )
210	IF ( restart_time /= remote ) THEN
211	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
212	'": restart_time = ', restart_time, '& is not equal to ', &
213	'restart_time_remote = ', remote
214	CALL message( 'check_parameters', 'PA0006', 1, 2, 0, 6, 0 )
215	ENDIF
216
217	CALL MPI_SEND( dt_restart, 1, MPI_REAL, target_id, 13, comm_inter, &
218	ierr )
219	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 13, comm_inter, &
220	status, ierr )
221	IF ( dt_restart /= remote ) THEN
222	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
223	'": dt_restart = ', dt_restart, '& is not equal to ', &
224	'dt_restart_remote = ', remote
225	CALL message( 'check_parameters', 'PA0007', 1, 2, 0, 6, 0 )
226	ENDIF
227
228	simulation_time_since_reference = end_time - coupling_start_time
229	CALL MPI_SEND( simulation_time_since_reference, 1, MPI_REAL, target_id, &
230	14, comm_inter, ierr )
231	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 14, comm_inter, &
232	status, ierr )
233	IF ( simulation_time_since_reference /= remote ) THEN
234	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
235	'": simulation_time_since_reference = ', &
236	simulation_time_since_reference, '& is not equal to ', &
237	'simulation_time_since_reference_remote = ', remote
238	CALL message( 'check_parameters', 'PA0008', 1, 2, 0, 6, 0 )
239	ENDIF
240
241	CALL MPI_SEND( dx, 1, MPI_REAL, target_id, 15, comm_inter, ierr )
242	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 15, comm_inter, &
243	status, ierr )
244	IF ( dx /= remote ) THEN
245	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
246	'": dx = ', dx, '& is not equal to dx_remote = ', remote
247	CALL message( 'check_parameters', 'PA0009', 1, 2, 0, 6, 0 )
248	ENDIF
249
250	CALL MPI_SEND( dy, 1, MPI_REAL, target_id, 16, comm_inter, ierr )
251	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 16, comm_inter, &
252	status, ierr )
253	IF ( dy /= remote ) THEN
254	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
255	'": dy = ', dy, '& is not equal to dy_remote = ', remote
256	CALL message( 'check_parameters', 'PA0010', 1, 2, 0, 6, 0 )
257	ENDIF
258
259	CALL MPI_SEND( nx, 1, MPI_INTEGER, target_id, 17, comm_inter, ierr )
260	CALL MPI_RECV( iremote, 1, MPI_INTEGER, target_id, 17, comm_inter, &
261	status, ierr )
262	IF ( nx /= iremote ) THEN
263	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
264	'": nx = ', nx, '& is not equal to nx_remote = ', iremote
265	CALL message( 'check_parameters', 'PA0011', 1, 2, 0, 6, 0 )
266	ENDIF
267
268	CALL MPI_SEND( ny, 1, MPI_INTEGER, target_id, 18, comm_inter, ierr )
269	CALL MPI_RECV( iremote, 1, MPI_INTEGER, target_id, 18, comm_inter, &
270	status, ierr )
271	IF ( ny /= iremote ) THEN
272	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
273	'": ny = ', ny, '& is not equal to ny_remote = ', iremote
274	CALL message( 'check_parameters', 'PA0012', 1, 2, 0, 6, 0 )
275	ENDIF
276	#else
277	WRITE( message_string, * ) 'coupling requires PALM to be called with', &
278	' ''mrun -K parallel'''
279	CALL message( 'check_parameters', 'PA0141', 1, 2, 0, 6, 0 )
280	#endif
281	ENDIF
282
283	#if defined( __parallel )
284	!
285	!-- Exchange via intercommunicator
286	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
287	CALL MPI_SEND( humidity, 1, MPI_LOGICAL, target_id, 19, comm_inter, &
288	ierr )
289	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
290	CALL MPI_RECV( humidity_remote, 1, MPI_LOGICAL, target_id, 19, &
291	comm_inter, status, ierr )
292	ENDIF
293	#endif
294
295
296	!
297	!-- Generate the file header which is used as a header for most of PALM's
298	!-- output files
299	CALL DATE_AND_TIME( date, time )
300	run_date = date(7:8)//'-'//date(5:6)//'-'//date(3:4)
301	run_time = time(1:2)//':'//time(3:4)//':'//time(5:6)
302	IF ( coupling_mode == 'uncoupled' ) THEN
303	coupling_string = ''
304	ELSEIF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
305	coupling_string = ' coupled (atmosphere)'
306	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
307	coupling_string = ' coupled (ocean)'
308	ENDIF
309
310	WRITE ( run_description_header, &
311	'(A,2X,A,2X,A,A,A,I2.2,A,2X,A,A,2X,A,1X,A)' ) &
312	TRIM( version ), TRIM( revision ), 'run: ', &
313	TRIM( run_identifier ), '.', runnr, TRIM( coupling_string ), &
314	'host: ', TRIM( host ), run_date, run_time
315
316	!
317	!-- Check the general loop optimization method
318	IF ( loop_optimization == 'default' ) THEN
319	IF ( host(1:3) == 'nec' ) THEN
320	loop_optimization = 'vector'
321	ELSE
322	loop_optimization = 'cache'
323	ENDIF
324	ENDIF
325	IF ( loop_optimization /= 'noopt' .AND. loop_optimization /= 'cache' &
326	.AND. loop_optimization /= 'vector' ) THEN
327	message_string = 'illegal value given for loop_optimization: "' // &
328	TRIM( loop_optimization ) // '"'
329	CALL message( 'check_parameters', 'PA0013', 1, 2, 0, 6, 0 )
330	ENDIF
331
332	!
333	!-- Check topography setting (check for illegal parameter combinations)
334	IF ( topography /= 'flat' ) THEN
335	action = ' '
336	IF ( scalar_advec /= 'pw-scheme' ) THEN
337	WRITE( action, '(A,A)' ) 'scalar_advec = ', scalar_advec
338	ENDIF
339	IF ( momentum_advec /= 'pw-scheme' ) THEN
340	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
341	ENDIF
342	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
343	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
344	ENDIF
345	IF ( psolver == 'sor' ) THEN
346	WRITE( action, '(A,A)' ) 'psolver = ', psolver
347	ENDIF
348	IF ( sloping_surface ) THEN
349	WRITE( action, '(A)' ) 'sloping surface = .TRUE.'
350	ENDIF
351	IF ( galilei_transformation ) THEN
352	WRITE( action, '(A)' ) 'galilei_transformation = .TRUE.'
353	ENDIF
354	IF ( cloud_physics ) THEN
355	WRITE( action, '(A)' ) 'cloud_physics = .TRUE.'
356	ENDIF
357	IF ( cloud_droplets ) THEN
358	WRITE( action, '(A)' ) 'cloud_droplets = .TRUE.'
359	ENDIF
360	IF ( .NOT. prandtl_layer ) THEN
361	WRITE( action, '(A)' ) 'prandtl_layer = .FALSE.'
362	ENDIF
363	IF ( action /= ' ' ) THEN
364	message_string = 'a non-flat topography does not allow ' // &
365	TRIM( action )
366	CALL message( 'check_parameters', 'PA0014', 1, 2, 0, 6, 0 )
367	ENDIF
368	!
369	!-- In case of non-flat topography, check whether the convention how to
370	!-- define the topography grid has been set correctly, or whether the default
371	!-- is applicable. If this is not possible, abort.
372	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
373	IF ( TRIM( topography ) /= 'single_building' .AND. &
374	TRIM( topography ) /= 'single_street_canyon' .AND. &
375	TRIM( topography ) /= 'read_from_file' ) THEN
376	!-- The default value is not applicable here, because it is only valid
377	!-- for the two standard cases 'single_building' and 'read_from_file'
378	!-- defined in init_grid.
379	WRITE( message_string, * ) &
380	'The value for "topography_grid_convention" ', &
381	'is not set. Its default value is & only valid for ', &
382	'"topography" = ''single_building'', ', &
383	'''single_street_canyon'' & or ''read_from_file''.', &
384	' & Choose ''cell_edge'' or ''cell_center''.'
385	CALL message( 'user_check_parameters', 'PA0239', 1, 2, 0, 6, 0 )
386	ELSE
387	!-- The default value is applicable here.
388	!-- Set convention according to topography.
389	IF ( TRIM( topography ) == 'single_building' .OR. &
390	TRIM( topography ) == 'single_street_canyon' ) THEN
391	topography_grid_convention = 'cell_edge'
392	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
393	topography_grid_convention = 'cell_center'
394	ENDIF
395	ENDIF
396	ELSEIF ( TRIM( topography_grid_convention ) /= 'cell_edge' .AND. &
397	TRIM( topography_grid_convention ) /= 'cell_center' ) THEN
398	WRITE( message_string, * ) &
399	'The value for "topography_grid_convention" is ', &
400	'not recognized. & Choose ''cell_edge'' or ''cell_center''.'
401	CALL message( 'user_check_parameters', 'PA0240', 1, 2, 0, 6, 0 )
402	ENDIF
403
404	ENDIF
405
406	!
407	!-- Check ocean setting
408	IF ( ocean ) THEN
409
410	action = ' '
411	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
412	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
413	ENDIF
414	IF ( momentum_advec == 'ups-scheme' ) THEN
415	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
416	ENDIF
417	IF ( action /= ' ' ) THEN
418	message_string = 'ocean = .T. does not allow ' // TRIM( action )
419	CALL message( 'check_parameters', 'PA0015', 1, 2, 0, 6, 0 )
420	ENDIF
421
422	ELSEIF ( TRIM( coupling_mode ) == 'uncoupled' .AND. &
423	TRIM( coupling_char ) == '_O' ) THEN
424
425	!
426	!-- Check whether an (uncoupled) atmospheric run has been declared as an
427	!-- ocean run (this setting is done via mrun-option -y)
428
429	message_string = 'ocean = .F. does not allow coupling_char = "' // &
430	TRIM( coupling_char ) // '" set by mrun-option "-y"'
431	CALL message( 'check_parameters', 'PA0317', 1, 2, 0, 6, 0 )
432
433	ENDIF
434
435	!
436	!-- Check whether there are any illegal values
437	!-- Pressure solver:
438	IF ( psolver /= 'poisfft' .AND. psolver /= 'poisfft_hybrid' .AND. &
439	psolver /= 'sor' .AND. psolver /= 'multigrid' ) THEN
440	message_string = 'unknown solver for perturbation pressure: psolver' // &
441	' = "' // TRIM( psolver ) // '"'
442	CALL message( 'check_parameters', 'PA0016', 1, 2, 0, 6, 0 )
443	ENDIF
444
445	#if defined( __parallel )
446	IF ( psolver == 'poisfft_hybrid' .AND. pdims(2) /= 1 ) THEN
447	message_string = 'psolver = "' // TRIM( psolver ) // '" only works ' // &
448	'for a 1d domain-decomposition along x & please do' // &
449	' not set npey/=1 in the parameter file'
450	CALL message( 'check_parameters', 'PA0017', 1, 2, 0, 6, 0 )
451	ENDIF
452	IF ( psolver == 'poisfft_hybrid' .AND. &
453	( nxra > nxr .OR. nyna > nyn .OR. nza > nz ) .OR. &
454	psolver == 'multigrid' .AND. &
455	( nxra > nxr .OR. nyna > nyn ) ) THEN
456	message_string = 'psolver = "' // TRIM( psolver ) // '" does not ' // &
457	'work for subdomains with unequal size & please ' // &
458	'set grid_matching = ''strict'' in the parameter file'
459	CALL message( 'check_parameters', 'PA0018', 1, 2, 0, 6, 0 )
460	ENDIF
461	#else
462	IF ( psolver == 'poisfft_hybrid' ) THEN
463	message_string = 'psolver = "' // TRIM( psolver ) // '" only works' // &
464	' for a parallel environment'
465	CALL message( 'check_parameters', 'PA0019', 1, 2, 0, 6, 0 )
466	ENDIF
467	#endif
468
469	IF ( psolver == 'multigrid' ) THEN
470	IF ( cycle_mg == 'w' ) THEN
471	gamma_mg = 2
472	ELSEIF ( cycle_mg == 'v' ) THEN
473	gamma_mg = 1
474	ELSE
475	message_string = 'unknown multigrid cycle: cycle_mg = "' // &
476	TRIM( cycle_mg ) // '"'
477	CALL message( 'check_parameters', 'PA0020', 1, 2, 0, 6, 0 )
478	ENDIF
479	ENDIF
480
481	IF ( fft_method /= 'singleton-algorithm' .AND. &
482	fft_method /= 'temperton-algorithm' .AND. &
483	fft_method /= 'system-specific' ) THEN
484	message_string = 'unknown fft-algorithm: fft_method = "' // &
485	TRIM( fft_method ) // '"'
486	CALL message( 'check_parameters', 'PA0021', 1, 2, 0, 6, 0 )
487	ENDIF
488
489	!
490	!-- Advection schemes:
491	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ups-scheme' ) &
492	THEN
493	message_string = 'unknown advection scheme: momentum_advec = "' // &
494	TRIM( momentum_advec ) // '"'
495	CALL message( 'check_parameters', 'PA0022', 1, 2, 0, 6, 0 )
496	ENDIF
497	IF ( ( momentum_advec == 'ups-scheme' .OR. scalar_advec == 'ups-scheme' )&
498	.AND. timestep_scheme /= 'euler' ) THEN
499	message_string = 'momentum_advec = "' // TRIM( momentum_advec ) // &
500	'" is not allowed with timestep_scheme = "' // &
501	TRIM( timestep_scheme ) // '"'
502	CALL message( 'check_parameters', 'PA0023', 1, 2, 0, 6, 0 )
503	ENDIF
504
505	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'bc-scheme' .AND.&
506	scalar_advec /= 'ups-scheme' ) THEN
507	message_string = 'unknown advection scheme: scalar_advec = "' // &
508	TRIM( scalar_advec ) // '"'
509	CALL message( 'check_parameters', 'PA0024', 1, 2, 0, 6, 0 )
510	ENDIF
511
512	IF ( use_sgs_for_particles .AND. .NOT. use_upstream_for_tke ) THEN
513	use_upstream_for_tke = .TRUE.
514	message_string = 'use_upstream_for_tke set .TRUE. because ' // &
515	'use_sgs_for_particles = .TRUE.'
516	CALL message( 'check_parameters', 'PA0025', 0, 1, 0, 6, 0 )
517	ENDIF
518
519	IF ( use_upstream_for_tke .AND. timestep_scheme(1:8) == 'leapfrog' ) THEN
520	message_string = 'use_upstream_for_tke = .TRUE. not allowed with ' // &
521	'timestep_scheme = "' // TRIM( timestep_scheme ) // '"'
522	CALL message( 'check_parameters', 'PA0026', 1, 2, 0, 6, 0 )
523	ENDIF
524
525	!
526	!-- Timestep schemes:
527	SELECT CASE ( TRIM( timestep_scheme ) )
528
529	CASE ( 'euler' )
530	intermediate_timestep_count_max = 1
531	asselin_filter_factor = 0.0
532
533	CASE ( 'leapfrog', 'leapfrog+euler' )
534	intermediate_timestep_count_max = 1
535
536	CASE ( 'runge-kutta-2' )
537	intermediate_timestep_count_max = 2
538	asselin_filter_factor = 0.0
539
540	CASE ( 'runge-kutta-3' )
541	intermediate_timestep_count_max = 3
542	asselin_filter_factor = 0.0
543
544	CASE DEFAULT
545	message_string = 'unknown timestep scheme: timestep_scheme = "' // &
546	TRIM( timestep_scheme ) // '"'
547	CALL message( 'check_parameters', 'PA0027', 1, 2, 0, 6, 0 )
548
549	END SELECT
550
551	IF ( scalar_advec == 'ups-scheme' .AND. timestep_scheme(1:5) == 'runge' )&
552	THEN
553	message_string = 'scalar advection scheme "' // TRIM( scalar_advec ) // &
554	'" & does not work with timestep_scheme "' // &
555	TRIM( timestep_scheme ) // '"'
556	CALL message( 'check_parameters', 'PA0028', 1, 2, 0, 6, 0 )
557	ENDIF
558
559	IF ( momentum_advec /= 'pw-scheme' .AND. timestep_scheme(1:5) == 'runge' ) &
560	THEN
561	message_string = 'momentum advection scheme "' // &
562	TRIM( momentum_advec ) // '" & does not work with ' // &
563	'timestep_scheme "' // TRIM( timestep_scheme ) // '"'
564	CALL message( 'check_parameters', 'PA0029', 1, 2, 0, 6, 0 )
565	ENDIF
566
567	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
568	TRIM( initializing_actions ) /= 'cyclic_fill' ) THEN
569	!
570	!-- No restart run: several initialising actions are possible
571	action = initializing_actions
572	DO WHILE ( TRIM( action ) /= '' )
573	position = INDEX( action, ' ' )
574	SELECT CASE ( action(1:position-1) )
575
576	CASE ( 'set_constant_profiles', 'set_1d-model_profiles', &
577	'by_user', 'initialize_vortex', 'initialize_ptanom' )
578	action = action(position+1:)
579
580	CASE DEFAULT
581	message_string = 'initializing_action = "' // &
582	TRIM( action ) // '" unkown or not allowed'
583	CALL message( 'check_parameters', 'PA0030', 1, 2, 0, 6, 0 )
584
585	END SELECT
586	ENDDO
587	ENDIF
588
589	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
590	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
591	message_string = 'initializing_actions = "set_constant_profiles"' // &
592	' and "set_1d-model_profiles" are not allowed ' // &
593	'simultaneously'
594	CALL message( 'check_parameters', 'PA0031', 1, 2, 0, 6, 0 )
595	ENDIF
596
597	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
598	INDEX( initializing_actions, 'by_user' ) /= 0 ) THEN
599	message_string = 'initializing_actions = "set_constant_profiles"' // &
600	' and "by_user" are not allowed simultaneously'
601	CALL message( 'check_parameters', 'PA0032', 1, 2, 0, 6, 0 )
602	ENDIF
603
604	IF ( INDEX( initializing_actions, 'by_user' ) /= 0 .AND. &
605	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
606	message_string = 'initializing_actions = "by_user" and ' // &
607	'"set_1d-model_profiles" are not allowed simultaneously'
608	CALL message( 'check_parameters', 'PA0033', 1, 2, 0, 6, 0 )
609	ENDIF
610
611	IF ( cloud_physics .AND. .NOT. humidity ) THEN
612	WRITE( message_string, * ) 'cloud_physics = ', cloud_physics, ' is ', &
613	'not allowed with humidity = ', humidity
614	CALL message( 'check_parameters', 'PA0034', 1, 2, 0, 6, 0 )
615	ENDIF
616
617	IF ( precipitation .AND. .NOT. cloud_physics ) THEN
618	WRITE( message_string, * ) 'precipitation = ', precipitation, ' is ', &
619	'not allowed with cloud_physics = ', cloud_physics
620	CALL message( 'check_parameters', 'PA0035', 1, 2, 0, 6, 0 )
621	ENDIF
622
623	IF ( humidity .AND. sloping_surface ) THEN
624	message_string = 'humidity = .TRUE. and sloping_surface = .TRUE. ' // &
625	'are not allowed simultaneously'
626	CALL message( 'check_parameters', 'PA0036', 1, 2, 0, 6, 0 )
627	ENDIF
628
629	IF ( humidity .AND. scalar_advec == 'ups-scheme' ) THEN
630	message_string = 'UPS-scheme is not implemented for humidity = .TRUE.'
631	CALL message( 'check_parameters', 'PA0037', 1, 2, 0, 6, 0 )
632	ENDIF
633
634	IF ( passive_scalar .AND. humidity ) THEN
635	message_string = 'humidity = .TRUE. and passive_scalar = .TRUE. ' // &
636	'is not allowed simultaneously'
637	CALL message( 'check_parameters', 'PA0038', 1, 2, 0, 6, 0 )
638	ENDIF
639
640	IF ( passive_scalar .AND. scalar_advec == 'ups-scheme' ) THEN
641	message_string = 'UPS-scheme is not implemented for passive_scalar' // &
642	' = .TRUE.'
643	CALL message( 'check_parameters', 'PA0039', 1, 2, 0, 6, 0 )
644	ENDIF
645
646	IF ( grid_matching /= 'strict' .AND. grid_matching /= 'match' ) THEN
647	message_string = 'illegal value "' // TRIM( grid_matching ) // &
648	'" found for parameter grid_matching'
649	CALL message( 'check_parameters', 'PA0040', 1, 2, 0, 6, 0 )
650	ENDIF
651
652	IF ( plant_canopy .AND. ( drag_coefficient == 0.0 ) ) THEN
653	message_string = 'plant_canopy = .TRUE. requires a non-zero drag ' // &
654	'coefficient & given value is drag_coefficient = 0.0'
655	CALL message( 'check_parameters', 'PA0041', 1, 2, 0, 6, 0 )
656	ENDIF
657
658	!
659	!-- In case of no model continuation run, check initialising parameters and
660	!-- deduce further quantities
661	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
662
663	!
664	!-- Initial profiles for 1D and 3D model, respectively
665	u_init = ug_surface
666	v_init = vg_surface
667	pt_init = pt_surface
668	IF ( humidity ) q_init = q_surface
669	IF ( ocean ) sa_init = sa_surface
670	IF ( passive_scalar ) q_init = s_surface
671	IF ( plant_canopy ) lad = 0.0
672
673	!
674	!--
675	!-- If required, compute initial profile of the geostrophic wind
676	!-- (component ug)
677	i = 1
678	gradient = 0.0
679
680	IF ( .NOT. ocean ) THEN
681
682	ug_vertical_gradient_level_ind(1) = 0
683	ug(0) = ug_surface
684	DO k = 1, nzt+1
685	IF ( i < 11 ) THEN
686	IF ( ug_vertical_gradient_level(i) < zu(k) .AND. &
687	ug_vertical_gradient_level(i) >= 0.0 ) THEN
688	gradient = ug_vertical_gradient(i) / 100.0
689	ug_vertical_gradient_level_ind(i) = k - 1
690	i = i + 1
691	ENDIF
692	ENDIF
693	IF ( gradient /= 0.0 ) THEN
694	IF ( k /= 1 ) THEN
695	ug(k) = ug(k-1) + dzu(k) * gradient
696	ELSE
697	ug(k) = ug_surface + 0.5 * dzu(k) * gradient
698	ENDIF
699	ELSE
700	ug(k) = ug(k-1)
701	ENDIF
702	ENDDO
703
704	ELSE
705
706	ug_vertical_gradient_level_ind(1) = nzt+1
707	ug(nzt+1) = ug_surface
708	DO k = nzt, 0, -1
709	IF ( i < 11 ) THEN
710	IF ( ug_vertical_gradient_level(i) > zu(k) .AND. &
711	ug_vertical_gradient_level(i) <= 0.0 ) THEN
712	gradient = ug_vertical_gradient(i) / 100.0
713	ug_vertical_gradient_level_ind(i) = k + 1
714	i = i + 1
715	ENDIF
716	ENDIF
717	IF ( gradient /= 0.0 ) THEN
718	IF ( k /= nzt ) THEN
719	ug(k) = ug(k+1) - dzu(k+1) * gradient
720	ELSE
721	ug(k) = ug_surface - 0.5 * dzu(k+1) * gradient
722	ug(k+1) = ug_surface + 0.5 * dzu(k+1) * gradient
723	ENDIF
724	ELSE
725	ug(k) = ug(k+1)
726	ENDIF
727	ENDDO
728
729	ENDIF
730
731	u_init = ug
732
733	!
734	!-- In case of no given gradients for ug, choose a vanishing gradient
735	IF ( ug_vertical_gradient_level(1) == -9999999.9 ) THEN
736	ug_vertical_gradient_level(1) = 0.0
737	ENDIF
738
739	!
740	!--
741	!-- If required, compute initial profile of the geostrophic wind
742	!-- (component vg)
743	i = 1
744	gradient = 0.0
745
746	IF ( .NOT. ocean ) THEN
747
748	vg_vertical_gradient_level_ind(1) = 0
749	vg(0) = vg_surface
750	DO k = 1, nzt+1
751	IF ( i < 11 ) THEN
752	IF ( vg_vertical_gradient_level(i) < zu(k) .AND. &
753	vg_vertical_gradient_level(i) >= 0.0 ) THEN
754	gradient = vg_vertical_gradient(i) / 100.0
755	vg_vertical_gradient_level_ind(i) = k - 1
756	i = i + 1
757	ENDIF
758	ENDIF
759	IF ( gradient /= 0.0 ) THEN
760	IF ( k /= 1 ) THEN
761	vg(k) = vg(k-1) + dzu(k) * gradient
762	ELSE
763	vg(k) = vg_surface + 0.5 * dzu(k) * gradient
764	ENDIF
765	ELSE
766	vg(k) = vg(k-1)
767	ENDIF
768	ENDDO
769
770	ELSE
771
772	vg_vertical_gradient_level_ind(1) = nzt+1
773	vg(nzt+1) = vg_surface
774	DO k = nzt, 0, -1
775	IF ( i < 11 ) THEN
776	IF ( vg_vertical_gradient_level(i) > zu(k) .AND. &
777	vg_vertical_gradient_level(i) <= 0.0 ) THEN
778	gradient = vg_vertical_gradient(i) / 100.0
779	vg_vertical_gradient_level_ind(i) = k + 1
780	i = i + 1
781	ENDIF
782	ENDIF
783	IF ( gradient /= 0.0 ) THEN
784	IF ( k /= nzt ) THEN
785	vg(k) = vg(k+1) - dzu(k+1) * gradient
786	ELSE
787	vg(k) = vg_surface - 0.5 * dzu(k+1) * gradient
788	vg(k+1) = vg_surface + 0.5 * dzu(k+1) * gradient
789	ENDIF
790	ELSE
791	vg(k) = vg(k+1)
792	ENDIF
793	ENDDO
794
795	ENDIF
796
797	v_init = vg
798
799	!
800	!-- In case of no given gradients for vg, choose a vanishing gradient
801	IF ( vg_vertical_gradient_level(1) == -9999999.9 ) THEN
802	vg_vertical_gradient_level(1) = 0.0
803	ENDIF
804
805	!
806	!-- Compute initial temperature profile using the given temperature gradients
807	i = 1
808	gradient = 0.0
809
810	IF ( .NOT. ocean ) THEN
811
812	pt_vertical_gradient_level_ind(1) = 0
813	DO k = 1, nzt+1
814	IF ( i < 11 ) THEN
815	IF ( pt_vertical_gradient_level(i) < zu(k) .AND. &
816	pt_vertical_gradient_level(i) >= 0.0 ) THEN
817	gradient = pt_vertical_gradient(i) / 100.0
818	pt_vertical_gradient_level_ind(i) = k - 1
819	i = i + 1
820	ENDIF
821	ENDIF
822	IF ( gradient /= 0.0 ) THEN
823	IF ( k /= 1 ) THEN
824	pt_init(k) = pt_init(k-1) + dzu(k) * gradient
825	ELSE
826	pt_init(k) = pt_surface + 0.5 * dzu(k) * gradient
827	ENDIF
828	ELSE
829	pt_init(k) = pt_init(k-1)
830	ENDIF
831	ENDDO
832
833	ELSE
834
835	pt_vertical_gradient_level_ind(1) = nzt+1
836	DO k = nzt, 0, -1
837	IF ( i < 11 ) THEN
838	IF ( pt_vertical_gradient_level(i) > zu(k) .AND. &
839	pt_vertical_gradient_level(i) <= 0.0 ) THEN
840	gradient = pt_vertical_gradient(i) / 100.0
841	pt_vertical_gradient_level_ind(i) = k + 1
842	i = i + 1
843	ENDIF
844	ENDIF
845	IF ( gradient /= 0.0 ) THEN
846	IF ( k /= nzt ) THEN
847	pt_init(k) = pt_init(k+1) - dzu(k+1) * gradient
848	ELSE
849	pt_init(k) = pt_surface - 0.5 * dzu(k+1) * gradient
850	pt_init(k+1) = pt_surface + 0.5 * dzu(k+1) * gradient
851	ENDIF
852	ELSE
853	pt_init(k) = pt_init(k+1)
854	ENDIF
855	ENDDO
856
857	ENDIF
858
859	!
860	!-- In case of no given temperature gradients, choose gradient of neutral
861	!-- stratification
862	IF ( pt_vertical_gradient_level(1) == -9999999.9 ) THEN
863	pt_vertical_gradient_level(1) = 0.0
864	ENDIF
865
866	!
867	!-- Store temperature gradient at the top boundary for possible Neumann
868	!-- boundary condition
869	bc_pt_t_val = ( pt_init(nzt+1) - pt_init(nzt) ) / dzu(nzt+1)
870
871	!
872	!-- If required, compute initial humidity or scalar profile using the given
873	!-- humidity/scalar gradient. In case of scalar transport, initially store
874	!-- values of the scalar parameters on humidity parameters
875	IF ( passive_scalar ) THEN
876	bc_q_b = bc_s_b
877	bc_q_t = bc_s_t
878	q_surface = s_surface
879	q_surface_initial_change = s_surface_initial_change
880	q_vertical_gradient = s_vertical_gradient
881	q_vertical_gradient_level = s_vertical_gradient_level
882	surface_waterflux = surface_scalarflux
883	wall_humidityflux = wall_scalarflux
884	ENDIF
885
886	IF ( humidity .OR. passive_scalar ) THEN
887
888	i = 1
889	gradient = 0.0
890	q_vertical_gradient_level_ind(1) = 0
891	DO k = 1, nzt+1
892	IF ( i < 11 ) THEN
893	IF ( q_vertical_gradient_level(i) < zu(k) .AND. &
894	q_vertical_gradient_level(i) >= 0.0 ) THEN
895	gradient = q_vertical_gradient(i) / 100.0
896	q_vertical_gradient_level_ind(i) = k - 1
897	i = i + 1
898	ENDIF
899	ENDIF
900	IF ( gradient /= 0.0 ) THEN
901	IF ( k /= 1 ) THEN
902	q_init(k) = q_init(k-1) + dzu(k) * gradient
903	ELSE
904	q_init(k) = q_init(k-1) + 0.5 * dzu(k) * gradient
905	ENDIF
906	ELSE
907	q_init(k) = q_init(k-1)
908	ENDIF
909	!
910	!-- Avoid negative humidities
911	IF ( q_init(k) < 0.0 ) THEN
912	q_init(k) = 0.0
913	ENDIF
914	ENDDO
915
916	!
917	!-- In case of no given humidity gradients, choose zero gradient
918	!-- conditions
919	IF ( q_vertical_gradient_level(1) == -1.0 ) THEN
920	q_vertical_gradient_level(1) = 0.0
921	ENDIF
922
923	!
924	!-- Store humidity gradient at the top boundary for possile Neumann
925	!-- boundary condition
926	bc_q_t_val = ( q_init(nzt+1) - q_init(nzt) ) / dzu(nzt+1)
927
928	ENDIF
929
930	!
931	!-- If required, compute initial salinity profile using the given salinity
932	!-- gradients
933	IF ( ocean ) THEN
934
935	i = 1
936	gradient = 0.0
937
938	sa_vertical_gradient_level_ind(1) = nzt+1
939	DO k = nzt, 0, -1
940	IF ( i < 11 ) THEN
941	IF ( sa_vertical_gradient_level(i) > zu(k) .AND. &
942	sa_vertical_gradient_level(i) <= 0.0 ) THEN
943	gradient = sa_vertical_gradient(i) / 100.0
944	sa_vertical_gradient_level_ind(i) = k + 1
945	i = i + 1
946	ENDIF
947	ENDIF
948	IF ( gradient /= 0.0 ) THEN
949	IF ( k /= nzt ) THEN
950	sa_init(k) = sa_init(k+1) - dzu(k+1) * gradient
951	ELSE
952	sa_init(k) = sa_surface - 0.5 * dzu(k+1) * gradient
953	sa_init(k+1) = sa_surface + 0.5 * dzu(k+1) * gradient
954	ENDIF
955	ELSE
956	sa_init(k) = sa_init(k+1)
957	ENDIF
958	ENDDO
959
960	ENDIF
961
962	!
963	!-- If required compute the profile of leaf area density used in the plant
964	!-- canopy model
965	IF ( plant_canopy ) THEN
966
967	i = 1
968	gradient = 0.0
969
970	IF ( .NOT. ocean ) THEN
971
972	lad(0) = lad_surface
973
974	lad_vertical_gradient_level_ind(1) = 0
975	DO k = 1, pch_index
976	IF ( i < 11 ) THEN
977	IF ( lad_vertical_gradient_level(i) < zu(k) .AND. &
978	lad_vertical_gradient_level(i) >= 0.0 ) THEN
979	gradient = lad_vertical_gradient(i)
980	lad_vertical_gradient_level_ind(i) = k - 1
981	i = i + 1
982	ENDIF
983	ENDIF
984	IF ( gradient /= 0.0 ) THEN
985	IF ( k /= 1 ) THEN
986	lad(k) = lad(k-1) + dzu(k) * gradient
987	ELSE
988	lad(k) = lad_surface + 0.5 * dzu(k) *gradient
989	ENDIF
990	ELSE
991	lad(k) = lad(k-1)
992	ENDIF
993	ENDDO
994
995	ENDIF
996
997	!
998	!-- In case of no given leaf area density gradients, choose a vanishing
999	!-- gradient
1000	IF ( lad_vertical_gradient_level(1) == -9999999.9 ) THEN
1001	lad_vertical_gradient_level(1) = 0.0
1002	ENDIF
1003
1004	ENDIF
1005
1006	ENDIF
1007
1008	!
1009	!-- Initialize large scale subsidence if required
1010	IF ( ws_vertical_gradient_level(1) /= -9999999.9 ) THEN
1011	large_scale_subsidence = .TRUE.
1012	CALL init_w_subsidence
1013	END IF
1014
1015
1016	!
1017	!-- Compute Coriolis parameter
1018	f = 2.0 * omega * SIN( phi / 180.0 * pi )
1019	fs = 2.0 * omega * COS( phi / 180.0 * pi )
1020
1021	!
1022	!-- Ocean runs always use reference values in the buoyancy term. Therefore
1023	!-- set the reference temperature equal to the surface temperature.
1024	IF ( ocean .AND. pt_reference == 9999999.9 ) pt_reference = pt_surface
1025
1026	!
1027	!-- Reference value has to be used in buoyancy terms
1028	IF ( pt_reference /= 9999999.9 ) use_reference = .TRUE.
1029
1030	!
1031	!-- Sign of buoyancy/stability terms
1032	IF ( ocean ) atmos_ocean_sign = -1.0
1033
1034	!
1035	!-- Ocean version must use flux boundary conditions at the top
1036	IF ( ocean .AND. .NOT. use_top_fluxes ) THEN
1037	message_string = 'use_top_fluxes must be .TRUE. in ocean version'
1038	CALL message( 'check_parameters', 'PA0042', 1, 2, 0, 6, 0 )
1039	ENDIF
1040
1041	!
1042	!-- In case of a given slope, compute the relevant quantities
1043	IF ( alpha_surface /= 0.0 ) THEN
1044	IF ( ABS( alpha_surface ) > 90.0 ) THEN
1045	WRITE( message_string, * ) 'ABS( alpha_surface = ', alpha_surface, &
1046	' ) must be < 90.0'
1047	CALL message( 'check_parameters', 'PA0043', 1, 2, 0, 6, 0 )
1048	ENDIF
1049	sloping_surface = .TRUE.
1050	cos_alpha_surface = COS( alpha_surface / 180.0 * pi )
1051	sin_alpha_surface = SIN( alpha_surface / 180.0 * pi )
1052	ENDIF
1053
1054	!
1055	!-- Check time step and cfl_factor
1056	IF ( dt /= -1.0 ) THEN
1057	IF ( dt <= 0.0 .AND. dt /= -1.0 ) THEN
1058	WRITE( message_string, * ) 'dt = ', dt , ' <= 0.0'
1059	CALL message( 'check_parameters', 'PA0044', 1, 2, 0, 6, 0 )
1060	ENDIF
1061	dt_3d = dt
1062	dt_fixed = .TRUE.
1063	ENDIF
1064
1065	IF ( cfl_factor <= 0.0 .OR. cfl_factor > 1.0 ) THEN
1066	IF ( cfl_factor == -1.0 ) THEN
1067	IF ( momentum_advec == 'ups-scheme' .OR. &
1068	scalar_advec == 'ups-scheme' ) THEN
1069	cfl_factor = 0.8
1070	ELSE
1071	IF ( timestep_scheme == 'runge-kutta-2' ) THEN
1072	cfl_factor = 0.8
1073	ELSEIF ( timestep_scheme == 'runge-kutta-3' ) THEN
1074	cfl_factor = 0.9
1075	ELSE
1076	cfl_factor = 0.1
1077	ENDIF
1078	ENDIF
1079	ELSE
1080	WRITE( message_string, * ) 'cfl_factor = ', cfl_factor, &
1081	' out of range & 0.0 < cfl_factor <= 1.0 is required'
1082	CALL message( 'check_parameters', 'PA0045', 1, 2, 0, 6, 0 )
1083	ENDIF
1084	ENDIF
1085
1086	!
1087	!-- Store simulated time at begin
1088	simulated_time_at_begin = simulated_time
1089
1090	!
1091	!-- Store reference time for coupled runs and change the coupling flag,
1092	!-- if ...
1093	IF ( simulated_time == 0.0 ) THEN
1094	IF ( coupling_start_time == 0.0 ) THEN
1095	time_since_reference_point = 0.0
1096	ELSEIF ( time_since_reference_point < 0.0 ) THEN
1097	run_coupled = .FALSE.
1098	ENDIF
1099	ENDIF
1100
1101	!
1102	!-- Set wind speed in the Galilei-transformed system
1103	IF ( galilei_transformation ) THEN
1104	IF ( use_ug_for_galilei_tr .AND. &
1105	ug_vertical_gradient_level(1) == 0.0 .AND. &
1106	vg_vertical_gradient_level(1) == 0.0 ) THEN
1107	u_gtrans = ug_surface
1108	v_gtrans = vg_surface
1109	ELSEIF ( use_ug_for_galilei_tr .AND. &
1110	ug_vertical_gradient_level(1) /= 0.0 ) THEN
1111	message_string = 'baroclinicity (ug) not allowed simultaneously' // &
1112	' with galilei transformation'
1113	CALL message( 'check_parameters', 'PA0046', 1, 2, 0, 6, 0 )
1114	ELSEIF ( use_ug_for_galilei_tr .AND. &
1115	vg_vertical_gradient_level(1) /= 0.0 ) THEN
1116	message_string = 'baroclinicity (vg) not allowed simultaneously' // &
1117	' with galilei transformation'
1118	CALL message( 'check_parameters', 'PA0047', 1, 2, 0, 6, 0 )
1119	ELSE
1120	message_string = 'variable translation speed used for galilei-' // &
1121	'transformation, which may cause & instabilities in stably ' // &
1122	'stratified regions'
1123	CALL message( 'check_parameters', 'PA0048', 0, 1, 0, 6, 0 )
1124	ENDIF
1125	ENDIF
1126
1127	!
1128	!-- In case of using a prandtl-layer, calculated (or prescribed) surface
1129	!-- fluxes have to be used in the diffusion-terms
1130	IF ( prandtl_layer ) use_surface_fluxes = .TRUE.
1131
1132	!
1133	!-- Check boundary conditions and set internal variables:
1134	!-- Lateral boundary conditions
1135	IF ( bc_lr /= 'cyclic' .AND. bc_lr /= 'dirichlet/radiation' .AND. &
1136	bc_lr /= 'radiation/dirichlet' ) THEN
1137	message_string = 'unknown boundary condition: bc_lr = "' // &
1138	TRIM( bc_lr ) // '"'
1139	CALL message( 'check_parameters', 'PA0049', 1, 2, 0, 6, 0 )
1140	ENDIF
1141	IF ( bc_ns /= 'cyclic' .AND. bc_ns /= 'dirichlet/radiation' .AND. &
1142	bc_ns /= 'radiation/dirichlet' ) THEN
1143	message_string = 'unknown boundary condition: bc_ns = "' // &
1144	TRIM( bc_ns ) // '"'
1145	CALL message( 'check_parameters', 'PA0050', 1, 2, 0, 6, 0 )
1146	ENDIF
1147
1148	!
1149	!-- Internal variables used for speed optimization in if clauses
1150	IF ( bc_lr /= 'cyclic' ) bc_lr_cyc = .FALSE.
1151	IF ( bc_ns /= 'cyclic' ) bc_ns_cyc = .FALSE.
1152
1153	!
1154	!-- Non-cyclic lateral boundaries require the multigrid method and Piascek-
1155	!-- Willimas advection scheme. Several schemes and tools do not work with
1156	!-- non-cyclic boundary conditions.
1157	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
1158	IF ( psolver /= 'multigrid' ) THEN
1159	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1160	'psolver = "' // TRIM( psolver ) // '"'
1161	CALL message( 'check_parameters', 'PA0051', 1, 2, 0, 6, 0 )
1162	ENDIF
1163	IF ( momentum_advec /= 'pw-scheme' ) THEN
1164	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1165	'momentum_advec = "' // TRIM( momentum_advec ) // '"'
1166	CALL message( 'check_parameters', 'PA0052', 1, 2, 0, 6, 0 )
1167	ENDIF
1168	IF ( scalar_advec /= 'pw-scheme' ) THEN
1169	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1170	'scalar_advec = "' // TRIM( scalar_advec ) // '"'
1171	CALL message( 'check_parameters', 'PA0053', 1, 2, 0, 6, 0 )
1172	ENDIF
1173	IF ( galilei_transformation ) THEN
1174	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1175	'galilei_transformation = .T.'
1176	CALL message( 'check_parameters', 'PA0054', 1, 2, 0, 6, 0 )
1177	ENDIF
1178	ENDIF
1179
1180	!
1181	!-- Bottom boundary condition for the turbulent Kinetic energy
1182	IF ( bc_e_b == 'neumann' ) THEN
1183	ibc_e_b = 1
1184	IF ( adjust_mixing_length .AND. prandtl_layer ) THEN
1185	message_string = 'adjust_mixing_length = TRUE and bc_e_b = "neumann"'
1186	CALL message( 'check_parameters', 'PA0055', 0, 1, 0, 6, 0 )
1187	ENDIF
1188	ELSEIF ( bc_e_b == '(u)*2+neumann' ) THEN
1189	ibc_e_b = 2
1190	IF ( .NOT. adjust_mixing_length .AND. prandtl_layer ) THEN
1191	message_string = 'adjust_mixing_length = FALSE and bc_e_b = "' // &
1192	TRIM( bc_e_b ) // '"'
1193	CALL message( 'check_parameters', 'PA0056', 0, 1, 0, 6, 0 )
1194	ENDIF
1195	IF ( .NOT. prandtl_layer ) THEN
1196	bc_e_b = 'neumann'
1197	ibc_e_b = 1
1198	message_string = 'boundary condition bc_e_b changed to "' // &
1199	TRIM( bc_e_b ) // '"'
1200	CALL message( 'check_parameters', 'PA0057', 0, 1, 0, 6, 0 )
1201	ENDIF
1202	ELSE
1203	message_string = 'unknown boundary condition: bc_e_b = "' // &
1204	TRIM( bc_e_b ) // '"'
1205	CALL message( 'check_parameters', 'PA0058', 1, 2, 0, 6, 0 )
1206	ENDIF
1207
1208	!
1209	!-- Boundary conditions for perturbation pressure
1210	IF ( bc_p_b == 'dirichlet' ) THEN
1211	ibc_p_b = 0
1212	ELSEIF ( bc_p_b == 'neumann' ) THEN
1213	ibc_p_b = 1
1214	ELSEIF ( bc_p_b == 'neumann+inhomo' ) THEN
1215	ibc_p_b = 2
1216	ELSE
1217	message_string = 'unknown boundary condition: bc_p_b = "' // &
1218	TRIM( bc_p_b ) // '"'
1219	CALL message( 'check_parameters', 'PA0059', 1, 2, 0, 6, 0 )
1220	ENDIF
1221	IF ( ibc_p_b == 2 .AND. .NOT. prandtl_layer ) THEN
1222	message_string = 'boundary condition: bc_p_b = "' // TRIM( bc_p_b ) // &
1223	'" not allowed with prandtl_layer = .FALSE.'
1224	CALL message( 'check_parameters', 'PA0060', 1, 2, 0, 6, 0 )
1225	ENDIF
1226	IF ( bc_p_t == 'dirichlet' ) THEN
1227	ibc_p_t = 0
1228	ELSEIF ( bc_p_t == 'neumann' ) THEN
1229	ibc_p_t = 1
1230	ELSE
1231	message_string = 'unknown boundary condition: bc_p_t = "' // &
1232	TRIM( bc_p_t ) // '"'
1233	CALL message( 'check_parameters', 'PA0061', 1, 2, 0, 6, 0 )
1234	ENDIF
1235
1236	!
1237	!-- Boundary conditions for potential temperature
1238	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
1239	ibc_pt_b = 2
1240	ELSE
1241	IF ( bc_pt_b == 'dirichlet' ) THEN
1242	ibc_pt_b = 0
1243	ELSEIF ( bc_pt_b == 'neumann' ) THEN
1244	ibc_pt_b = 1
1245	ELSE
1246	message_string = 'unknown boundary condition: bc_pt_b = "' // &
1247	TRIM( bc_pt_b ) // '"'
1248	CALL message( 'check_parameters', 'PA0062', 1, 2, 0, 6, 0 )
1249	ENDIF
1250	ENDIF
1251
1252	IF ( bc_pt_t == 'dirichlet' ) THEN
1253	ibc_pt_t = 0
1254	ELSEIF ( bc_pt_t == 'neumann' ) THEN
1255	ibc_pt_t = 1
1256	ELSEIF ( bc_pt_t == 'initial_gradient' ) THEN
1257	ibc_pt_t = 2
1258	ELSE
1259	message_string = 'unknown boundary condition: bc_pt_t = "' // &
1260	TRIM( bc_pt_t ) // '"'
1261	CALL message( 'check_parameters', 'PA0063', 1, 2, 0, 6, 0 )
1262	ENDIF
1263
1264	IF ( surface_heatflux == 9999999.9 ) constant_heatflux = .FALSE.
1265	IF ( top_heatflux == 9999999.9 ) constant_top_heatflux = .FALSE.
1266	IF ( top_momentumflux_u /= 9999999.9 .AND. &
1267	top_momentumflux_v /= 9999999.9 ) THEN
1268	constant_top_momentumflux = .TRUE.
1269	ELSEIF ( .NOT. ( top_momentumflux_u == 9999999.9 .AND. &
1270	top_momentumflux_v == 9999999.9 ) ) THEN
1271	message_string = 'both, top_momentumflux_u AND top_momentumflux_v ' // &
1272	'must be set'
1273	CALL message( 'check_parameters', 'PA0064', 1, 2, 0, 6, 0 )
1274	ENDIF
1275
1276	!
1277	!-- A given surface temperature implies Dirichlet boundary condition for
1278	!-- temperature. In this case specification of a constant heat flux is
1279	!-- forbidden.
1280	IF ( ibc_pt_b == 0 .AND. constant_heatflux .AND. &
1281	surface_heatflux /= 0.0 ) THEN
1282	message_string = 'boundary_condition: bc_pt_b = "' // TRIM( bc_pt_b ) //&
1283	'& is not allowed with constant_heatflux = .TRUE.'
1284	CALL message( 'check_parameters', 'PA0065', 1, 2, 0, 6, 0 )
1285	ENDIF
1286	IF ( constant_heatflux .AND. pt_surface_initial_change /= 0.0 ) THEN
1287	WRITE ( message_string, * ) 'constant_heatflux = .TRUE. is not allo', &
1288	'wed with pt_surface_initial_change (/=0) = ', &
1289	pt_surface_initial_change
1290	CALL message( 'check_parameters', 'PA0066', 1, 2, 0, 6, 0 )
1291	ENDIF
1292
1293	!
1294	!-- A given temperature at the top implies Dirichlet boundary condition for
1295	!-- temperature. In this case specification of a constant heat flux is
1296	!-- forbidden.
1297	IF ( ibc_pt_t == 0 .AND. constant_top_heatflux .AND. &
1298	top_heatflux /= 0.0 ) THEN
1299	message_string = 'boundary_condition: bc_pt_t = "' // TRIM( bc_pt_t ) //&
1300	'" is not allowed with constant_top_heatflux = .TRUE.'
1301	CALL message( 'check_parameters', 'PA0067', 1, 2, 0, 6, 0 )
1302	ENDIF
1303
1304	!
1305	!-- Boundary conditions for salinity
1306	IF ( ocean ) THEN
1307	IF ( bc_sa_t == 'dirichlet' ) THEN
1308	ibc_sa_t = 0
1309	ELSEIF ( bc_sa_t == 'neumann' ) THEN
1310	ibc_sa_t = 1
1311	ELSE
1312	message_string = 'unknown boundary condition: bc_sa_t = "' // &
1313	TRIM( bc_sa_t ) // '"'
1314	CALL message( 'check_parameters', 'PA0068', 1, 2, 0, 6, 0 )
1315	ENDIF
1316
1317	IF ( top_salinityflux == 9999999.9 ) constant_top_salinityflux = .FALSE.
1318	IF ( ibc_sa_t == 1 .AND. top_salinityflux == 9999999.9 ) THEN
1319	message_string = 'boundary condition: bc_sa_t = "' // &
1320	TRIM( bc_sa_t ) // '" requires to set ' // &
1321	'top_salinityflux'
1322	CALL message( 'check_parameters', 'PA0069', 1, 2, 0, 6, 0 )
1323	ENDIF
1324
1325	!
1326	!-- A fixed salinity at the top implies Dirichlet boundary condition for
1327	!-- salinity. In this case specification of a constant salinity flux is
1328	!-- forbidden.
1329	IF ( ibc_sa_t == 0 .AND. constant_top_salinityflux .AND. &
1330	top_salinityflux /= 0.0 ) THEN
1331	message_string = 'boundary condition: bc_sa_t = "' // &
1332	TRIM( bc_sa_t ) // '" is not allowed with ' // &
1333	'constant_top_salinityflux = .TRUE.'
1334	CALL message( 'check_parameters', 'PA0070', 1, 2, 0, 6, 0 )
1335	ENDIF
1336
1337	ENDIF
1338
1339	!
1340	!-- In case of humidity or passive scalar, set boundary conditions for total
1341	!-- water content / scalar
1342	IF ( humidity .OR. passive_scalar ) THEN
1343	IF ( humidity ) THEN
1344	sq = 'q'
1345	ELSE
1346	sq = 's'
1347	ENDIF
1348	IF ( bc_q_b == 'dirichlet' ) THEN
1349	ibc_q_b = 0
1350	ELSEIF ( bc_q_b == 'neumann' ) THEN
1351	ibc_q_b = 1
1352	ELSE
1353	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
1354	'_b ="' // TRIM( bc_q_b ) // '"'
1355	CALL message( 'check_parameters', 'PA0071', 1, 2, 0, 6, 0 )
1356	ENDIF
1357	IF ( bc_q_t == 'dirichlet' ) THEN
1358	ibc_q_t = 0
1359	ELSEIF ( bc_q_t == 'neumann' ) THEN
1360	ibc_q_t = 1
1361	ELSE
1362	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
1363	'_t ="' // TRIM( bc_q_t ) // '"'
1364	CALL message( 'check_parameters', 'PA0072', 1, 2, 0, 6, 0 )
1365	ENDIF
1366
1367	IF ( surface_waterflux == 0.0 ) constant_waterflux = .FALSE.
1368
1369	!
1370	!-- A given surface humidity implies Dirichlet boundary condition for
1371	!-- humidity. In this case specification of a constant water flux is
1372	!-- forbidden.
1373	IF ( ibc_q_b == 0 .AND. constant_waterflux ) THEN
1374	message_string = 'boundary condition: bc_' // TRIM( sq ) // '_b ' // &
1375	'= "' // TRIM( bc_q_b ) // '" is not allowed wi' // &
1376	'th prescribed surface flux'
1377	CALL message( 'check_parameters', 'PA0073', 1, 2, 0, 6, 0 )
1378	ENDIF
1379	IF ( constant_waterflux .AND. q_surface_initial_change /= 0.0 ) THEN
1380	WRITE( message_string, * ) 'a prescribed surface flux is not allo', &
1381	'wed with ', sq, '_surface_initial_change (/=0) = ', &
1382	q_surface_initial_change
1383	CALL message( 'check_parameters', 'PA0074', 1, 2, 0, 6, 0 )
1384	ENDIF
1385
1386	ENDIF
1387
1388	!
1389	!-- Boundary conditions for horizontal components of wind speed
1390	IF ( bc_uv_b == 'dirichlet' ) THEN
1391	ibc_uv_b = 0
1392	ELSEIF ( bc_uv_b == 'neumann' ) THEN
1393	ibc_uv_b = 1
1394	IF ( prandtl_layer ) THEN
1395	message_string = 'boundary condition: bc_uv_b = "' // &
1396	TRIM( bc_uv_b ) // '" is not allowed with prandtl_layer = .TRUE.'
1397	CALL message( 'check_parameters', 'PA0075', 1, 2, 0, 6, 0 )
1398	ENDIF
1399	ELSE
1400	message_string = 'unknown boundary condition: bc_uv_b = "' // &
1401	TRIM( bc_uv_b ) // '"'
1402	CALL message( 'check_parameters', 'PA0076', 1, 2, 0, 6, 0 )
1403	ENDIF
1404
1405	IF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
1406	bc_uv_t = 'neumann'
1407	ibc_uv_t = 1
1408	ELSE
1409	IF ( bc_uv_t == 'dirichlet' .OR. bc_uv_t == 'dirichlet_0' ) THEN
1410	ibc_uv_t = 0
1411	ELSEIF ( bc_uv_t == 'neumann' ) THEN
1412	ibc_uv_t = 1
1413	ELSE
1414	message_string = 'unknown boundary condition: bc_uv_t = "' // &
1415	TRIM( bc_uv_t ) // '"'
1416	CALL message( 'check_parameters', 'PA0077', 1, 2, 0, 6, 0 )
1417	ENDIF
1418	ENDIF
1419
1420	!
1421	!-- Compute and check, respectively, the Rayleigh Damping parameter
1422	IF ( rayleigh_damping_factor == -1.0 ) THEN
1423	IF ( momentum_advec == 'ups-scheme' ) THEN
1424	rayleigh_damping_factor = 0.01
1425	ELSE
1426	rayleigh_damping_factor = 0.0
1427	ENDIF
1428	ELSE
1429	IF ( rayleigh_damping_factor < 0.0 .OR. rayleigh_damping_factor > 1.0 ) &
1430	THEN
1431	WRITE( message_string, * ) 'rayleigh_damping_factor = ', &
1432	rayleigh_damping_factor, ' out of range [0.0,1.0]'
1433	CALL message( 'check_parameters', 'PA0078', 1, 2, 0, 6, 0 )
1434	ENDIF
1435	ENDIF
1436
1437	IF ( rayleigh_damping_height == -1.0 ) THEN
1438	IF ( .NOT. ocean ) THEN
1439	rayleigh_damping_height = 0.66666666666 * zu(nzt)
1440	ELSE
1441	rayleigh_damping_height = 0.66666666666 * zu(nzb)
1442	ENDIF
1443	ELSE
1444	IF ( .NOT. ocean ) THEN
1445	IF ( rayleigh_damping_height < 0.0 .OR. &
1446	rayleigh_damping_height > zu(nzt) ) THEN
1447	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
1448	rayleigh_damping_height, ' out of range [0.0,', zu(nzt), ']'
1449	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
1450	ENDIF
1451	ELSE
1452	IF ( rayleigh_damping_height > 0.0 .OR. &
1453	rayleigh_damping_height < zu(nzb) ) THEN
1454	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
1455	rayleigh_damping_height, ' out of range [0.0,', zu(nzb), ']'
1456	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
1457	ENDIF
1458	ENDIF
1459	ENDIF
1460
1461	!
1462	!-- Check limiters for Upstream-Spline scheme
1463	IF ( overshoot_limit_u < 0.0 .OR. overshoot_limit_v < 0.0 .OR. &
1464	overshoot_limit_w < 0.0 .OR. overshoot_limit_pt < 0.0 .OR. &
1465	overshoot_limit_e < 0.0 ) THEN
1466	message_string = 'overshoot_limit_... < 0.0 is not allowed'
1467	CALL message( 'check_parameters', 'PA0080', 1, 2, 0, 6, 0 )
1468	ENDIF
1469	IF ( ups_limit_u < 0.0 .OR. ups_limit_v < 0.0 .OR. ups_limit_w < 0.0 .OR. &
1470	ups_limit_pt < 0.0 .OR. ups_limit_e < 0.0 ) THEN
1471	message_string = 'ups_limit_... < 0.0 is not allowed'
1472	CALL message( 'check_parameters', 'PA0081', 1, 2, 0, 6, 0 )
1473	ENDIF
1474
1475	!
1476	!-- Check number of chosen statistic regions. More than 10 regions are not
1477	!-- allowed, because so far no more than 10 corresponding output files can
1478	!-- be opened (cf. check_open)
1479	IF ( statistic_regions > 9 .OR. statistic_regions < 0 ) THEN
1480	WRITE ( message_string, * ) 'number of statistic_regions = ', &
1481	statistic_regions+1, ' but only 10 regions are allowed'
1482	CALL message( 'check_parameters', 'PA0082', 1, 2, 0, 6, 0 )
1483	ENDIF
1484	IF ( normalizing_region > statistic_regions .OR. &
1485	normalizing_region < 0) THEN
1486	WRITE ( message_string, * ) 'normalizing_region = ', &
1487	normalizing_region, ' must be >= 0 and <= ',statistic_regions, &
1488	' (value of statistic_regions)'
1489	CALL message( 'check_parameters', 'PA0083', 1, 2, 0, 6, 0 )
1490	ENDIF
1491
1492	!
1493	!-- Check the interval for sorting particles.
1494	!-- Using particles as cloud droplets requires sorting after each timestep.
1495	IF ( dt_sort_particles /= 0.0 .AND. cloud_droplets ) THEN
1496	dt_sort_particles = 0.0
1497	message_string = 'dt_sort_particles is reset to 0.0 because of cloud' //&
1498	'_droplets = .TRUE.'
1499	CALL message( 'check_parameters', 'PA0084', 0, 1, 0, 6, 0 )
1500	ENDIF
1501
1502	!
1503	!-- Set the default intervals for data output, if necessary
1504	!-- NOTE: dt_dosp has already been set in package_parin
1505	IF ( dt_data_output /= 9999999.9 ) THEN
1506	IF ( dt_dopr == 9999999.9 ) dt_dopr = dt_data_output
1507	IF ( dt_dopts == 9999999.9 ) dt_dopts = dt_data_output
1508	IF ( dt_do2d_xy == 9999999.9 ) dt_do2d_xy = dt_data_output
1509	IF ( dt_do2d_xz == 9999999.9 ) dt_do2d_xz = dt_data_output
1510	IF ( dt_do2d_yz == 9999999.9 ) dt_do2d_yz = dt_data_output
1511	IF ( dt_do3d == 9999999.9 ) dt_do3d = dt_data_output
1512	IF ( dt_data_output_av == 9999999.9 ) dt_data_output_av = dt_data_output
1513	DO mid = 1, max_masks
1514	IF ( dt_domask(mid) == 9999999.9 ) dt_domask(mid) = dt_data_output
1515	ENDDO
1516	ENDIF
1517
1518	!
1519	!-- Set the default skip time intervals for data output, if necessary
1520	IF ( skip_time_dopr == 9999999.9 ) &
1521	skip_time_dopr = skip_time_data_output
1522	IF ( skip_time_dosp == 9999999.9 ) &
1523	skip_time_dosp = skip_time_data_output
1524	IF ( skip_time_do2d_xy == 9999999.9 ) &
1525	skip_time_do2d_xy = skip_time_data_output
1526	IF ( skip_time_do2d_xz == 9999999.9 ) &
1527	skip_time_do2d_xz = skip_time_data_output
1528	IF ( skip_time_do2d_yz == 9999999.9 ) &
1529	skip_time_do2d_yz = skip_time_data_output
1530	IF ( skip_time_do3d == 9999999.9 ) &
1531	skip_time_do3d = skip_time_data_output
1532	IF ( skip_time_data_output_av == 9999999.9 ) &
1533	skip_time_data_output_av = skip_time_data_output
1534	DO mid = 1, max_masks
1535	IF ( skip_time_domask(mid) == 9999999.9 ) &
1536	skip_time_domask(mid) = skip_time_data_output
1537	ENDDO
1538
1539	!
1540	!-- Check the average intervals (first for 3d-data, then for profiles and
1541	!-- spectra)
1542	IF ( averaging_interval > dt_data_output_av ) THEN
1543	WRITE( message_string, * ) 'averaging_interval = ', &
1544	averaging_interval, ' must be <= dt_data_output = ', dt_data_output
1545	CALL message( 'check_parameters', 'PA0085', 1, 2, 0, 6, 0 )
1546	ENDIF
1547
1548	IF ( averaging_interval_pr == 9999999.9 ) THEN
1549	averaging_interval_pr = averaging_interval
1550	ENDIF
1551
1552	IF ( averaging_interval_pr > dt_dopr ) THEN
1553	WRITE( message_string, * ) 'averaging_interval_pr = ', &
1554	averaging_interval_pr, ' must be <= dt_dopr = ', dt_dopr
1555	CALL message( 'check_parameters', 'PA0086', 1, 2, 0, 6, 0 )
1556	ENDIF
1557
1558	IF ( averaging_interval_sp == 9999999.9 ) THEN
1559	averaging_interval_sp = averaging_interval
1560	ENDIF
1561
1562	IF ( averaging_interval_sp > dt_dosp ) THEN
1563	WRITE( message_string, * ) 'averaging_interval_sp = ', &
1564	averaging_interval_sp, ' must be <= dt_dosp = ', dt_dosp
1565	CALL message( 'check_parameters', 'PA0087', 1, 2, 0, 6, 0 )
1566	ENDIF
1567
1568	!
1569	!-- Set the default interval for profiles entering the temporal average
1570	IF ( dt_averaging_input_pr == 9999999.9 ) THEN
1571	dt_averaging_input_pr = dt_averaging_input
1572	ENDIF
1573
1574	!
1575	!-- Set the default interval for the output of timeseries to a reasonable
1576	!-- value (tries to minimize the number of calls of flow_statistics)
1577	IF ( dt_dots == 9999999.9 ) THEN
1578	IF ( averaging_interval_pr == 0.0 ) THEN
1579	dt_dots = MIN( dt_run_control, dt_dopr )
1580	ELSE
1581	dt_dots = MIN( dt_run_control, dt_averaging_input_pr )
1582	ENDIF
1583	ENDIF
1584
1585	!
1586	!-- Check the sample rate for averaging (first for 3d-data, then for profiles)
1587	IF ( dt_averaging_input > averaging_interval ) THEN
1588	WRITE( message_string, * ) 'dt_averaging_input = ', &
1589	dt_averaging_input, ' must be <= averaging_interval = ', &
1590	averaging_interval
1591	CALL message( 'check_parameters', 'PA0088', 1, 2, 0, 6, 0 )
1592	ENDIF
1593
1594	IF ( dt_averaging_input_pr > averaging_interval_pr ) THEN
1595	WRITE( message_string, * ) 'dt_averaging_input_pr = ', &
1596	dt_averaging_input_pr, ' must be <= averaging_interval_pr = ', &
1597	averaging_interval_pr
1598	CALL message( 'check_parameters', 'PA0089', 1, 2, 0, 6, 0 )
1599	ENDIF
1600
1601	!
1602	!-- Set the default value for the integration interval of precipitation amount
1603	IF ( precipitation ) THEN
1604	IF ( precipitation_amount_interval == 9999999.9 ) THEN
1605	precipitation_amount_interval = dt_do2d_xy
1606	ELSE
1607	IF ( precipitation_amount_interval > dt_do2d_xy ) THEN
1608	WRITE( message_string, * ) 'precipitation_amount_interval = ', &
1609	precipitation_amount_interval, ' must not be larger than ', &
1610	'dt_do2d_xy = ', dt_do2d_xy
1611	CALL message( 'check_parameters', 'PA0090', 1, 2, 0, 6, 0 )
1612	ENDIF
1613	ENDIF
1614	ENDIF
1615
1616	!
1617	!-- Determine the number of output profiles and check whether they are
1618	!-- permissible
1619	DO WHILE ( data_output_pr(dopr_n+1) /= ' ' )
1620
1621	dopr_n = dopr_n + 1
1622	i = dopr_n
1623
1624	!
1625	!-- Determine internal profile number (for hom, homs)
1626	!-- and store height levels
1627	SELECT CASE ( TRIM( data_output_pr(i) ) )
1628
1629	CASE ( 'u', '#u' )
1630	dopr_index(i) = 1
1631	dopr_unit(i) = 'm/s'
1632	hom(:,2,1,:) = SPREAD( zu, 2, statistic_regions+1 )
1633	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1634	dopr_initial_index(i) = 5
1635	hom(:,2,5,:) = SPREAD( zu, 2, statistic_regions+1 )
1636	data_output_pr(i) = data_output_pr(i)(2:)
1637	ENDIF
1638
1639	CASE ( 'v', '#v' )
1640	dopr_index(i) = 2
1641	dopr_unit(i) = 'm/s'
1642	hom(:,2,2,:) = SPREAD( zu, 2, statistic_regions+1 )
1643	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1644	dopr_initial_index(i) = 6
1645	hom(:,2,6,:) = SPREAD( zu, 2, statistic_regions+1 )
1646	data_output_pr(i) = data_output_pr(i)(2:)
1647	ENDIF
1648
1649	CASE ( 'w' )
1650	dopr_index(i) = 3
1651	dopr_unit(i) = 'm/s'
1652	hom(:,2,3,:) = SPREAD( zw, 2, statistic_regions+1 )
1653
1654	CASE ( 'pt', '#pt' )
1655	IF ( .NOT. cloud_physics ) THEN
1656	dopr_index(i) = 4
1657	dopr_unit(i) = 'K'
1658	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
1659	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1660	dopr_initial_index(i) = 7
1661	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
1662	hom(nzb,2,7,:) = 0.0 ! because zu(nzb) is negative
1663	data_output_pr(i) = data_output_pr(i)(2:)
1664	ENDIF
1665	ELSE
1666	dopr_index(i) = 43
1667	dopr_unit(i) = 'K'
1668	hom(:,2,43,:) = SPREAD( zu, 2, statistic_regions+1 )
1669	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1670	dopr_initial_index(i) = 28
1671	hom(:,2,28,:) = SPREAD( zu, 2, statistic_regions+1 )
1672	hom(nzb,2,28,:) = 0.0 ! because zu(nzb) is negative
1673	data_output_pr(i) = data_output_pr(i)(2:)
1674	ENDIF
1675	ENDIF
1676
1677	CASE ( 'e' )
1678	dopr_index(i) = 8
1679	dopr_unit(i) = 'm2/s2'
1680	hom(:,2,8,:) = SPREAD( zu, 2, statistic_regions+1 )
1681	hom(nzb,2,8,:) = 0.0
1682
1683	CASE ( 'km', '#km' )
1684	dopr_index(i) = 9
1685	dopr_unit(i) = 'm2/s'
1686	hom(:,2,9,:) = SPREAD( zu, 2, statistic_regions+1 )
1687	hom(nzb,2,9,:) = 0.0
1688	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1689	dopr_initial_index(i) = 23
1690	hom(:,2,23,:) = hom(:,2,9,:)
1691	data_output_pr(i) = data_output_pr(i)(2:)
1692	ENDIF
1693
1694	CASE ( 'kh', '#kh' )
1695	dopr_index(i) = 10
1696	dopr_unit(i) = 'm2/s'
1697	hom(:,2,10,:) = SPREAD( zu, 2, statistic_regions+1 )
1698	hom(nzb,2,10,:) = 0.0
1699	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1700	dopr_initial_index(i) = 24
1701	hom(:,2,24,:) = hom(:,2,10,:)
1702	data_output_pr(i) = data_output_pr(i)(2:)
1703	ENDIF
1704
1705	CASE ( 'l', '#l' )
1706	dopr_index(i) = 11
1707	dopr_unit(i) = 'm'
1708	hom(:,2,11,:) = SPREAD( zu, 2, statistic_regions+1 )
1709	hom(nzb,2,11,:) = 0.0
1710	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1711	dopr_initial_index(i) = 25
1712	hom(:,2,25,:) = hom(:,2,11,:)
1713	data_output_pr(i) = data_output_pr(i)(2:)
1714	ENDIF
1715
1716	CASE ( 'w"u"' )
1717	dopr_index(i) = 12
1718	dopr_unit(i) = 'm2/s2'
1719	hom(:,2,12,:) = SPREAD( zw, 2, statistic_regions+1 )
1720	IF ( prandtl_layer ) hom(nzb,2,12,:) = zu(1)
1721
1722	CASE ( 'wu' )
1723	dopr_index(i) = 13
1724	dopr_unit(i) = 'm2/s2'
1725	hom(:,2,13,:) = SPREAD( zw, 2, statistic_regions+1 )
1726
1727	CASE ( 'w"v"' )
1728	dopr_index(i) = 14
1729	dopr_unit(i) = 'm2/s2'
1730	hom(:,2,14,:) = SPREAD( zw, 2, statistic_regions+1 )
1731	IF ( prandtl_layer ) hom(nzb,2,14,:) = zu(1)
1732
1733	CASE ( 'wv' )
1734	dopr_index(i) = 15
1735	dopr_unit(i) = 'm2/s2'
1736	hom(:,2,15,:) = SPREAD( zw, 2, statistic_regions+1 )
1737
1738	CASE ( 'w"pt"' )
1739	dopr_index(i) = 16
1740	dopr_unit(i) = 'K m/s'
1741	hom(:,2,16,:) = SPREAD( zw, 2, statistic_regions+1 )
1742
1743	CASE ( 'wpt' )
1744	dopr_index(i) = 17
1745	dopr_unit(i) = 'K m/s'
1746	hom(:,2,17,:) = SPREAD( zw, 2, statistic_regions+1 )
1747
1748	CASE ( 'wpt' )
1749	dopr_index(i) = 18
1750	dopr_unit(i) = 'K m/s'
1751	hom(:,2,18,:) = SPREAD( zw, 2, statistic_regions+1 )
1752
1753	CASE ( 'wu' )
1754	dopr_index(i) = 19
1755	dopr_unit(i) = 'm2/s2'
1756	hom(:,2,19,:) = SPREAD( zw, 2, statistic_regions+1 )
1757	IF ( prandtl_layer ) hom(nzb,2,19,:) = zu(1)
1758
1759	CASE ( 'wv' )
1760	dopr_index(i) = 20
1761	dopr_unit(i) = 'm2/s2'
1762	hom(:,2,20,:) = SPREAD( zw, 2, statistic_regions+1 )
1763	IF ( prandtl_layer ) hom(nzb,2,20,:) = zu(1)
1764
1765	CASE ( 'wptBC' )
1766	dopr_index(i) = 21
1767	dopr_unit(i) = 'K m/s'
1768	hom(:,2,21,:) = SPREAD( zw, 2, statistic_regions+1 )
1769
1770	CASE ( 'wptBC' )
1771	dopr_index(i) = 22
1772	dopr_unit(i) = 'K m/s'
1773	hom(:,2,22,:) = SPREAD( zw, 2, statistic_regions+1 )
1774
1775	CASE ( 'sa', '#sa' )
1776	IF ( .NOT. ocean ) THEN
1777	message_string = 'data_output_pr = ' // &
1778	TRIM( data_output_pr(i) ) // ' is not imp' // &
1779	'lemented for ocean = .FALSE.'
1780	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
1781	ELSE
1782	dopr_index(i) = 23
1783	dopr_unit(i) = 'psu'
1784	hom(:,2,23,:) = SPREAD( zu, 2, statistic_regions+1 )
1785	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1786	dopr_initial_index(i) = 26
1787	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1788	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1789	data_output_pr(i) = data_output_pr(i)(2:)
1790	ENDIF
1791	ENDIF
1792
1793	CASE ( 'u*2' )
1794	dopr_index(i) = 30
1795	dopr_unit(i) = 'm2/s2'
1796	hom(:,2,30,:) = SPREAD( zu, 2, statistic_regions+1 )
1797
1798	CASE ( 'v*2' )
1799	dopr_index(i) = 31
1800	dopr_unit(i) = 'm2/s2'
1801	hom(:,2,31,:) = SPREAD( zu, 2, statistic_regions+1 )
1802
1803	CASE ( 'w*2' )
1804	dopr_index(i) = 32
1805	dopr_unit(i) = 'm2/s2'
1806	hom(:,2,32,:) = SPREAD( zw, 2, statistic_regions+1 )
1807
1808	CASE ( 'pt*2' )
1809	dopr_index(i) = 33
1810	dopr_unit(i) = 'K2'
1811	hom(:,2,33,:) = SPREAD( zu, 2, statistic_regions+1 )
1812
1813	CASE ( 'e*' )
1814	dopr_index(i) = 34
1815	dopr_unit(i) = 'm2/s2'
1816	hom(:,2,34,:) = SPREAD( zu, 2, statistic_regions+1 )
1817
1818	CASE ( 'w2pt' )
1819	dopr_index(i) = 35
1820	dopr_unit(i) = 'K m2/s2'
1821	hom(:,2,35,:) = SPREAD( zw, 2, statistic_regions+1 )
1822
1823	CASE ( 'wpt2' )
1824	dopr_index(i) = 36
1825	dopr_unit(i) = 'K2 m/s'
1826	hom(:,2,36,:) = SPREAD( zw, 2, statistic_regions+1 )
1827
1828	CASE ( 'we' )
1829	dopr_index(i) = 37
1830	dopr_unit(i) = 'm3/s3'
1831	hom(:,2,37,:) = SPREAD( zw, 2, statistic_regions+1 )
1832
1833	CASE ( 'w*3' )
1834	dopr_index(i) = 38
1835	dopr_unit(i) = 'm3/s3'
1836	hom(:,2,38,:) = SPREAD( zw, 2, statistic_regions+1 )
1837
1838	CASE ( 'Sw' )
1839	dopr_index(i) = 39
1840	dopr_unit(i) = 'none'
1841	hom(:,2,39,:) = SPREAD( zw, 2, statistic_regions+1 )
1842
1843	CASE ( 'p' )
1844	dopr_index(i) = 40
1845	dopr_unit(i) = 'Pa'
1846	hom(:,2,40,:) = SPREAD( zu, 2, statistic_regions+1 )
1847
1848	CASE ( 'q', '#q' )
1849	IF ( .NOT. humidity ) THEN
1850	message_string = 'data_output_pr = ' // &
1851	TRIM( data_output_pr(i) ) // ' is not imp' // &
1852	'lemented for humidity = .FALSE.'
1853	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
1854	ELSE
1855	dopr_index(i) = 41
1856	dopr_unit(i) = 'kg/kg'
1857	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
1858	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1859	dopr_initial_index(i) = 26
1860	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1861	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1862	data_output_pr(i) = data_output_pr(i)(2:)
1863	ENDIF
1864	ENDIF
1865
1866	CASE ( 's', '#s' )
1867	IF ( .NOT. passive_scalar ) THEN
1868	message_string = 'data_output_pr = ' // &
1869	TRIM( data_output_pr(i) ) // ' is not imp' // &
1870	'lemented for passive_scalar = .FALSE.'
1871	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
1872	ELSE
1873	dopr_index(i) = 41
1874	dopr_unit(i) = 'kg/m3'
1875	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
1876	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1877	dopr_initial_index(i) = 26
1878	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1879	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1880	data_output_pr(i) = data_output_pr(i)(2:)
1881	ENDIF
1882	ENDIF
1883
1884	CASE ( 'qv', '#qv' )
1885	IF ( .NOT. cloud_physics ) THEN
1886	dopr_index(i) = 41
1887	dopr_unit(i) = 'kg/kg'
1888	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
1889	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1890	dopr_initial_index(i) = 26
1891	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1892	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1893	data_output_pr(i) = data_output_pr(i)(2:)
1894	ENDIF
1895	ELSE
1896	dopr_index(i) = 42
1897	dopr_unit(i) = 'kg/kg'
1898	hom(:,2,42,:) = SPREAD( zu, 2, statistic_regions+1 )
1899	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1900	dopr_initial_index(i) = 27
1901	hom(:,2,27,:) = SPREAD( zu, 2, statistic_regions+1 )
1902	hom(nzb,2,27,:) = 0.0 ! weil zu(nzb) negativ ist
1903	data_output_pr(i) = data_output_pr(i)(2:)
1904	ENDIF
1905	ENDIF
1906
1907	CASE ( 'lpt', '#lpt' )
1908	IF ( .NOT. cloud_physics ) THEN
1909	message_string = 'data_output_pr = ' // &
1910	TRIM( data_output_pr(i) ) // ' is not imp' // &
1911	'lemented for cloud_physics = .FALSE.'
1912	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
1913	ELSE
1914	dopr_index(i) = 4
1915	dopr_unit(i) = 'K'
1916	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
1917	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1918	dopr_initial_index(i) = 7
1919	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
1920	hom(nzb,2,7,:) = 0.0 ! weil zu(nzb) negativ ist
1921	data_output_pr(i) = data_output_pr(i)(2:)
1922	ENDIF
1923	ENDIF
1924
1925	CASE ( 'vpt', '#vpt' )
1926	dopr_index(i) = 44
1927	dopr_unit(i) = 'K'
1928	hom(:,2,44,:) = SPREAD( zu, 2, statistic_regions+1 )
1929	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1930	dopr_initial_index(i) = 29
1931	hom(:,2,29,:) = SPREAD( zu, 2, statistic_regions+1 )
1932	hom(nzb,2,29,:) = 0.0 ! weil zu(nzb) negativ ist
1933	data_output_pr(i) = data_output_pr(i)(2:)
1934	ENDIF
1935
1936	CASE ( 'w"vpt"' )
1937	dopr_index(i) = 45
1938	dopr_unit(i) = 'K m/s'
1939	hom(:,2,45,:) = SPREAD( zw, 2, statistic_regions+1 )
1940
1941	CASE ( 'wvpt' )
1942	dopr_index(i) = 46
1943	dopr_unit(i) = 'K m/s'
1944	hom(:,2,46,:) = SPREAD( zw, 2, statistic_regions+1 )
1945
1946	CASE ( 'wvpt' )
1947	dopr_index(i) = 47
1948	dopr_unit(i) = 'K m/s'
1949	hom(:,2,47,:) = SPREAD( zw, 2, statistic_regions+1 )
1950
1951	CASE ( 'w"q"' )
1952	IF ( .NOT. humidity ) THEN
1953	message_string = 'data_output_pr = ' // &
1954	TRIM( data_output_pr(i) ) // ' is not imp' // &
1955	'lemented for humidity = .FALSE.'
1956	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
1957	ELSE
1958	dopr_index(i) = 48
1959	dopr_unit(i) = 'kg/kg m/s'
1960	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
1961	ENDIF
1962
1963	CASE ( 'wq' )
1964	IF ( .NOT. humidity ) THEN
1965	message_string = 'data_output_pr = ' // &
1966	TRIM( data_output_pr(i) ) // ' is not imp' // &
1967	'lemented for humidity = .FALSE.'
1968	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
1969	ELSE
1970	dopr_index(i) = 49
1971	dopr_unit(i) = 'kg/kg m/s'
1972	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
1973	ENDIF
1974
1975	CASE ( 'wq' )
1976	IF ( .NOT. humidity ) THEN
1977	message_string = 'data_output_pr = ' // &
1978	TRIM( data_output_pr(i) ) // ' is not imp' // &
1979	'lemented for humidity = .FALSE.'
1980	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
1981	ELSE
1982	dopr_index(i) = 50
1983	dopr_unit(i) = 'kg/kg m/s'
1984	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
1985	ENDIF
1986
1987	CASE ( 'w"s"' )
1988	IF ( .NOT. passive_scalar ) THEN
1989	message_string = 'data_output_pr = ' // &
1990	TRIM( data_output_pr(i) ) // ' is not imp' // &
1991	'lemented for passive_scalar = .FALSE.'
1992	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
1993	ELSE
1994	dopr_index(i) = 48
1995	dopr_unit(i) = 'kg/m3 m/s'
1996	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
1997	ENDIF
1998
1999	CASE ( 'ws' )
2000	IF ( .NOT. passive_scalar ) THEN
2001	message_string = 'data_output_pr = ' // &
2002	TRIM( data_output_pr(i) ) // ' is not imp' // &
2003	'lemented for passive_scalar = .FALSE.'
2004	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2005	ELSE
2006	dopr_index(i) = 49
2007	dopr_unit(i) = 'kg/m3 m/s'
2008	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2009	ENDIF
2010
2011	CASE ( 'ws' )
2012	IF ( .NOT. passive_scalar ) THEN
2013	message_string = 'data_output_pr = ' // &
2014	TRIM( data_output_pr(i) ) // ' is not imp' // &
2015	'lemented for passive_scalar = .FALSE.'
2016	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2017	ELSE
2018	dopr_index(i) = 50
2019	dopr_unit(i) = 'kg/m3 m/s'
2020	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2021	ENDIF
2022
2023	CASE ( 'w"qv"' )
2024	IF ( humidity .AND. .NOT. cloud_physics ) &
2025	THEN
2026	dopr_index(i) = 48
2027	dopr_unit(i) = 'kg/kg m/s'
2028	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2029	ELSEIF( humidity .AND. cloud_physics ) THEN
2030	dopr_index(i) = 51
2031	dopr_unit(i) = 'kg/kg m/s'
2032	hom(:,2,51,:) = SPREAD( zw, 2, statistic_regions+1 )
2033	ELSE
2034	message_string = 'data_output_pr = ' // &
2035	TRIM( data_output_pr(i) ) // ' is not imp' // &
2036	'lemented for cloud_physics = .FALSE. an&' // &
2037	'd humidity = .FALSE.'
2038	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2039	ENDIF
2040
2041	CASE ( 'wqv' )
2042	IF ( humidity .AND. .NOT. cloud_physics ) &
2043	THEN
2044	dopr_index(i) = 49
2045	dopr_unit(i) = 'kg/kg m/s'
2046	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2047	ELSEIF( humidity .AND. cloud_physics ) THEN
2048	dopr_index(i) = 52
2049	dopr_unit(i) = 'kg/kg m/s'
2050	hom(:,2,52,:) = SPREAD( zw, 2, statistic_regions+1 )
2051	ELSE
2052	message_string = 'data_output_pr = ' // &
2053	TRIM( data_output_pr(i) ) // ' is not imp' // &
2054	'lemented for cloud_physics = .FALSE. an&' // &
2055	'd humidity = .FALSE.'
2056	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2057	ENDIF
2058
2059	CASE ( 'wqv' )
2060	IF ( humidity .AND. .NOT. cloud_physics ) &
2061	THEN
2062	dopr_index(i) = 50
2063	dopr_unit(i) = 'kg/kg m/s'
2064	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2065	ELSEIF( humidity .AND. cloud_physics ) THEN
2066	dopr_index(i) = 53
2067	dopr_unit(i) = 'kg/kg m/s'
2068	hom(:,2,53,:) = SPREAD( zw, 2, statistic_regions+1 )
2069	ELSE
2070	message_string = 'data_output_pr = ' // &
2071	TRIM( data_output_pr(i) ) // ' is not imp' // &
2072	'lemented for cloud_physics = .FALSE. an&' // &
2073	'd humidity = .FALSE.'
2074	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2075	ENDIF
2076
2077	CASE ( 'ql' )
2078	IF ( .NOT. cloud_physics .AND. .NOT. cloud_droplets ) THEN
2079	message_string = 'data_output_pr = ' // &
2080	TRIM( data_output_pr(i) ) // ' is not imp' // &
2081	'lemented for cloud_physics = .FALSE. or' // &
2082	'&cloud_droplets = .FALSE.'
2083	CALL message( 'check_parameters', 'PA0096', 1, 2, 0, 6, 0 )
2084	ELSE
2085	dopr_index(i) = 54
2086	dopr_unit(i) = 'kg/kg'
2087	hom(:,2,54,:) = SPREAD( zu, 2, statistic_regions+1 )
2088	ENDIF
2089
2090	CASE ( 'wuu*:dz' )
2091	dopr_index(i) = 55
2092	dopr_unit(i) = 'm2/s3'
2093	hom(:,2,55,:) = SPREAD( zu, 2, statistic_regions+1 )
2094
2095	CASE ( 'wp:dz' )
2096	dopr_index(i) = 56
2097	dopr_unit(i) = 'm2/s3'
2098	hom(:,2,56,:) = SPREAD( zw, 2, statistic_regions+1 )
2099
2100	CASE ( 'w"e:dz' )
2101	dopr_index(i) = 57
2102	dopr_unit(i) = 'm2/s3'
2103	hom(:,2,57,:) = SPREAD( zu, 2, statistic_regions+1 )
2104
2105	CASE ( 'u"pt"' )
2106	dopr_index(i) = 58
2107	dopr_unit(i) = 'K m/s'
2108	hom(:,2,58,:) = SPREAD( zu, 2, statistic_regions+1 )
2109
2110	CASE ( 'upt' )
2111	dopr_index(i) = 59
2112	dopr_unit(i) = 'K m/s'
2113	hom(:,2,59,:) = SPREAD( zu, 2, statistic_regions+1 )
2114
2115	CASE ( 'upt_t' )
2116	dopr_index(i) = 60
2117	dopr_unit(i) = 'K m/s'
2118	hom(:,2,60,:) = SPREAD( zu, 2, statistic_regions+1 )
2119
2120	CASE ( 'v"pt"' )
2121	dopr_index(i) = 61
2122	dopr_unit(i) = 'K m/s'
2123	hom(:,2,61,:) = SPREAD( zu, 2, statistic_regions+1 )
2124
2125	CASE ( 'vpt' )
2126	dopr_index(i) = 62
2127	dopr_unit(i) = 'K m/s'
2128	hom(:,2,62,:) = SPREAD( zu, 2, statistic_regions+1 )
2129
2130	CASE ( 'vpt_t' )
2131	dopr_index(i) = 63
2132	dopr_unit(i) = 'K m/s'
2133	hom(:,2,63,:) = SPREAD( zu, 2, statistic_regions+1 )
2134
2135	CASE ( 'rho' )
2136	IF ( .NOT. ocean ) THEN
2137	message_string = 'data_output_pr = ' // &
2138	TRIM( data_output_pr(i) ) // ' is not imp' // &
2139	'lemented for ocean = .FALSE.'
2140	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2141	ELSE
2142	dopr_index(i) = 64
2143	dopr_unit(i) = 'kg/m3'
2144	hom(:,2,64,:) = SPREAD( zu, 2, statistic_regions+1 )
2145	ENDIF
2146
2147	CASE ( 'w"sa"' )
2148	IF ( .NOT. ocean ) THEN
2149	message_string = 'data_output_pr = ' // &
2150	TRIM( data_output_pr(i) ) // ' is not imp' // &
2151	'lemented for ocean = .FALSE.'
2152	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2153	ELSE
2154	dopr_index(i) = 65
2155	dopr_unit(i) = 'psu m/s'
2156	hom(:,2,65,:) = SPREAD( zw, 2, statistic_regions+1 )
2157	ENDIF
2158
2159	CASE ( 'wsa' )
2160	IF ( .NOT. ocean ) THEN
2161	message_string = 'data_output_pr = ' // &
2162	TRIM( data_output_pr(i) ) // ' is not imp' // &
2163	'lemented for ocean = .FALSE.'
2164	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2165	ELSE
2166	dopr_index(i) = 66
2167	dopr_unit(i) = 'psu m/s'
2168	hom(:,2,66,:) = SPREAD( zw, 2, statistic_regions+1 )
2169	ENDIF
2170
2171	CASE ( 'wsa' )
2172	IF ( .NOT. ocean ) THEN
2173	message_string = 'data_output_pr = ' // &
2174	TRIM( data_output_pr(i) ) // ' is not imp' // &
2175	'lemented for ocean = .FALSE.'
2176	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2177	ELSE
2178	dopr_index(i) = 67
2179	dopr_unit(i) = 'psu m/s'
2180	hom(:,2,67,:) = SPREAD( zw, 2, statistic_regions+1 )
2181	ENDIF
2182
2183	CASE ( 'wp' )
2184	dopr_index(i) = 68
2185	dopr_unit(i) = 'm3/s3'
2186	hom(:,2,68,:) = SPREAD( zu, 2, statistic_regions+1 )
2187
2188	CASE ( 'w"e' )
2189	dopr_index(i) = 69
2190	dopr_unit(i) = 'm3/s3'
2191	hom(:,2,69,:) = SPREAD( zu, 2, statistic_regions+1 )
2192
2193	CASE ( 'q*2' )
2194	IF ( .NOT. humidity ) THEN
2195	message_string = 'data_output_pr = ' // &
2196	TRIM( data_output_pr(i) ) // ' is not imp' // &
2197	'lemented for humidity = .FALSE.'
2198	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2199	ELSE
2200	dopr_index(i) = 70
2201	dopr_unit(i) = 'kg2/kg2'
2202	hom(:,2,70,:) = SPREAD( zu, 2, statistic_regions+1 )
2203	ENDIF
2204
2205	CASE ( 'prho' )
2206	IF ( .NOT. ocean ) THEN
2207	message_string = 'data_output_pr = ' // &
2208	TRIM( data_output_pr(i) ) // ' is not imp' // &
2209	'lemented for ocean = .FALSE.'
2210	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2211	ELSE
2212	dopr_index(i) = 71
2213	dopr_unit(i) = 'kg/m3'
2214	hom(:,2,71,:) = SPREAD( zu, 2, statistic_regions+1 )
2215	ENDIF
2216
2217	CASE ( 'hyp' )
2218	dopr_index(i) = 72
2219	dopr_unit(i) = 'dbar'
2220	hom(:,2,72,:) = SPREAD( zu, 2, statistic_regions+1 )
2221
2222	CASE DEFAULT
2223
2224	CALL user_check_data_output_pr( data_output_pr(i), i, unit )
2225
2226	IF ( unit == 'illegal' ) THEN
2227	IF ( data_output_pr_user(1) /= ' ' ) THEN
2228	message_string = 'illegal value for data_output_pr or ' // &
2229	'data_output_pr_user = "' // &
2230	TRIM( data_output_pr(i) ) // '"'
2231	CALL message( 'check_parameters', 'PA0097', 1, 2, 0, 6, 0 )
2232	ELSE
2233	message_string = 'illegal value for data_output_pr = "' // &
2234	TRIM( data_output_pr(i) ) // '"'
2235	CALL message( 'check_parameters', 'PA0098', 1, 2, 0, 6, 0 )
2236	ENDIF
2237	ENDIF
2238
2239	END SELECT
2240	!
2241	!-- Check to which of the predefined coordinate systems the profile belongs
2242	DO k = 1, crmax
2243	IF ( INDEX( cross_profiles(k), ' '//TRIM( data_output_pr(i) )//' ' ) &
2244	/=0 ) &
2245	THEN
2246	dopr_crossindex(i) = k
2247	EXIT
2248	ENDIF
2249	ENDDO
2250	!
2251	!-- Generate the text for the labels of the PROFIL output file. "-characters
2252	!-- must be substituted, otherwise PROFIL would interpret them as TeX
2253	!-- control characters
2254	dopr_label(i) = data_output_pr(i)
2255	position = INDEX( dopr_label(i) , '"' )
2256	DO WHILE ( position /= 0 )
2257	dopr_label(i)(position:position) = ''''
2258	position = INDEX( dopr_label(i) , '"' )
2259	ENDDO
2260
2261	ENDDO
2262
2263	!
2264	!-- y-value range of the coordinate system (PROFIL).
2265	!-- x-value range determined in plot_1d.
2266	IF ( .NOT. ocean ) THEN
2267	cross_uymin = 0.0
2268	IF ( z_max_do1d == -1.0 ) THEN
2269	cross_uymax = zu(nzt+1)
2270	ELSEIF ( z_max_do1d < zu(nzb+1) .OR. z_max_do1d > zu(nzt+1) ) THEN
2271	WRITE( message_string, * ) 'z_max_do1d = ', z_max_do1d, ' must ', &
2272	'be >= ', zu(nzb+1), ' or <= ', zu(nzt+1)
2273	CALL message( 'check_parameters', 'PA0099', 1, 2, 0, 6, 0 )
2274	ELSE
2275	cross_uymax = z_max_do1d
2276	ENDIF
2277	ENDIF
2278
2279	!
2280	!-- Check whether the chosen normalizing factor for the coordinate systems is
2281	!-- permissible
2282	DO i = 1, crmax
2283	SELECT CASE ( TRIM( cross_normalized_x(i) ) ) ! TRIM required on IBM
2284
2285	CASE ( '', 'wpt0', 'ws2', 'tsw2', 'ws3', 'ws2tsw', 'wstsw2' )
2286	j = 0
2287
2288	CASE DEFAULT
2289	message_string = 'unknown normalization method cross_normali' // &
2290	'zed_x = "' // TRIM( cross_normalized_x(i) ) // &
2291	'"'
2292	CALL message( 'check_parameters', 'PA0100', 1, 2, 0, 6, 0 )
2293
2294	END SELECT
2295	SELECT CASE ( TRIM( cross_normalized_y(i) ) ) ! TRIM required on IBM
2296
2297	CASE ( '', 'z_i' )
2298	j = 0
2299
2300	CASE DEFAULT
2301	message_string = 'unknown normalization method cross_normali' // &
2302	'zed_y = "' // TRIM( cross_normalized_y(i) ) // &
2303	'"'
2304	CALL message( 'check_parameters', 'PA0101', 1, 2, 0, 6, 0 )
2305
2306	END SELECT
2307	ENDDO
2308	!
2309	!-- Check normalized y-value range of the coordinate system (PROFIL)
2310	IF ( z_max_do1d_normalized /= -1.0 .AND. z_max_do1d_normalized <= 0.0 ) &
2311	THEN
2312	WRITE( message_string, * ) 'z_max_do1d_normalized = ', &
2313	z_max_do1d_normalized, ' must be >= 0.0'
2314	CALL message( 'check_parameters', 'PA0101', 1, 2, 0, 6, 0 )
2315	ENDIF
2316
2317
2318	!
2319	!-- Append user-defined data output variables to the standard data output
2320	IF ( data_output_user(1) /= ' ' ) THEN
2321	i = 1
2322	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
2323	i = i + 1
2324	ENDDO
2325	j = 1
2326	DO WHILE ( data_output_user(j) /= ' ' .AND. j <= 100 )
2327	IF ( i > 100 ) THEN
2328	message_string = 'number of output quantitities given by data' // &
2329	'_output and data_output_user exceeds the limit of 100'
2330	CALL message( 'check_parameters', 'PA0102', 1, 2, 0, 6, 0 )
2331	ENDIF
2332	data_output(i) = data_output_user(j)
2333	i = i + 1
2334	j = j + 1
2335	ENDDO
2336	ENDIF
2337
2338	!
2339	!-- Check and set steering parameters for 2d/3d data output and averaging
2340	i = 1
2341	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
2342	!
2343	!-- Check for data averaging
2344	ilen = LEN_TRIM( data_output(i) )
2345	j = 0 ! no data averaging
2346	IF ( ilen > 3 ) THEN
2347	IF ( data_output(i)(ilen-2:ilen) == '_av' ) THEN
2348	j = 1 ! data averaging
2349	data_output(i) = data_output(i)(1:ilen-3)
2350	ENDIF
2351	ENDIF
2352	!
2353	!-- Check for cross section or volume data
2354	ilen = LEN_TRIM( data_output(i) )
2355	k = 0 ! 3d data
2356	var = data_output(i)(1:ilen)
2357	IF ( ilen > 3 ) THEN
2358	IF ( data_output(i)(ilen-2:ilen) == '_xy' .OR. &
2359	data_output(i)(ilen-2:ilen) == '_xz' .OR. &
2360	data_output(i)(ilen-2:ilen) == '_yz' ) THEN
2361	k = 1 ! 2d data
2362	var = data_output(i)(1:ilen-3)
2363	ENDIF
2364	ENDIF
2365	!
2366	!-- Check for allowed value and set units
2367	SELECT CASE ( TRIM( var ) )
2368
2369	CASE ( 'e' )
2370	IF ( constant_diffusion ) THEN
2371	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2372	'res constant_diffusion = .FALSE.'
2373	CALL message( 'check_parameters', 'PA0103', 1, 2, 0, 6, 0 )
2374	ENDIF
2375	unit = 'm2/s2'
2376
2377	CASE ( 'pc', 'pr' )
2378	IF ( .NOT. particle_advection ) THEN
2379	message_string = 'output of "' // TRIM( var ) // '" requir' // &
2380	'es a "particles_par"-NAMELIST in the parameter file (PARIN)'
2381	CALL message( 'check_parameters', 'PA0104', 1, 2, 0, 6, 0 )
2382	ENDIF
2383	IF ( TRIM( var ) == 'pc' ) unit = 'number'
2384	IF ( TRIM( var ) == 'pr' ) unit = 'm'
2385
2386	CASE ( 'q', 'vpt' )
2387	IF ( .NOT. humidity ) THEN
2388	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2389	'res humidity = .TRUE.'
2390	CALL message( 'check_parameters', 'PA0105', 1, 2, 0, 6, 0 )
2391	ENDIF
2392	IF ( TRIM( var ) == 'q' ) unit = 'kg/kg'
2393	IF ( TRIM( var ) == 'vpt' ) unit = 'K'
2394
2395	CASE ( 'ql' )
2396	IF ( .NOT. ( cloud_physics .OR. cloud_droplets ) ) THEN
2397	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2398	'res cloud_physics = .TRUE. or cloud_droplets = .TRUE.'
2399	CALL message( 'check_parameters', 'PA0106', 1, 2, 0, 6, 0 )
2400	ENDIF
2401	unit = 'kg/kg'
2402
2403	CASE ( 'ql_c', 'ql_v', 'ql_vp' )
2404	IF ( .NOT. cloud_droplets ) THEN
2405	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2406	'res cloud_droplets = .TRUE.'
2407	CALL message( 'check_parameters', 'PA0107', 1, 2, 0, 6, 0 )
2408	ENDIF
2409	IF ( TRIM( var ) == 'ql_c' ) unit = 'kg/kg'
2410	IF ( TRIM( var ) == 'ql_v' ) unit = 'm3'
2411	IF ( TRIM( var ) == 'ql_vp' ) unit = 'none'
2412
2413	CASE ( 'qv' )
2414	IF ( .NOT. cloud_physics ) THEN
2415	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2416	'res cloud_physics = .TRUE.'
2417	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2418	ENDIF
2419	unit = 'kg/kg'
2420
2421	CASE ( 'rho' )
2422	IF ( .NOT. ocean ) THEN
2423	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2424	'res ocean = .TRUE.'
2425	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
2426	ENDIF
2427	unit = 'kg/m3'
2428
2429	CASE ( 's' )
2430	IF ( .NOT. passive_scalar ) THEN
2431	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2432	'res passive_scalar = .TRUE.'
2433	CALL message( 'check_parameters', 'PA0110', 1, 2, 0, 6, 0 )
2434	ENDIF
2435	unit = 'conc'
2436
2437	CASE ( 'sa' )
2438	IF ( .NOT. ocean ) THEN
2439	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2440	'res ocean = .TRUE.'
2441	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
2442	ENDIF
2443	unit = 'psu'
2444
2445	CASE ( 'u', 't', 'lwp', 'pra', 'prr', 'qsws', 'shf', 'z0' )
2446	IF ( k == 0 .OR. data_output(i)(ilen-2:ilen) /= '_xy' ) THEN
2447	message_string = 'illegal value for data_output: "' // &
2448	TRIM( var ) // '" & only 2d-horizontal ' // &
2449	'cross sections are allowed for this value'
2450	CALL message( 'check_parameters', 'PA0111', 1, 2, 0, 6, 0 )
2451	ENDIF
2452	IF ( TRIM( var ) == 'lwp*' .AND. .NOT. cloud_physics ) THEN
2453	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2454	'res cloud_physics = .TRUE.'
2455	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2456	ENDIF
2457	IF ( TRIM( var ) == 'pra*' .AND. .NOT. precipitation ) THEN
2458	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2459	'res precipitation = .TRUE.'
2460	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2461	ENDIF
2462	IF ( TRIM( var ) == 'pra*' .AND. j == 1 ) THEN
2463	message_string = 'temporal averaging of precipitation ' // &
2464	'amount "' // TRIM( var ) // '" is not possible'
2465	CALL message( 'check_parameters', 'PA0113', 1, 2, 0, 6, 0 )
2466	ENDIF
2467	IF ( TRIM( var ) == 'prr*' .AND. .NOT. precipitation ) THEN
2468	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2469	'res precipitation = .TRUE.'
2470	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2471	ENDIF
2472	IF ( TRIM( var ) == 'qsws*' .AND. .NOT. humidity ) THEN
2473	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2474	'res humidity = .TRUE.'
2475	CALL message( 'check_parameters', 'PA0322', 1, 2, 0, 6, 0 )
2476	ENDIF
2477
2478	IF ( TRIM( var ) == 'lwp' ) unit = 'kg/kgm'
2479	IF ( TRIM( var ) == 'pra*' ) unit = 'mm'
2480	IF ( TRIM( var ) == 'prr*' ) unit = 'mm/s'
2481	IF ( TRIM( var ) == 'qsws*' ) unit = 'kgm/kgs'
2482	IF ( TRIM( var ) == 'shf' ) unit = 'Km/s'
2483	IF ( TRIM( var ) == 't*' ) unit = 'K'
2484	IF ( TRIM( var ) == 'u*' ) unit = 'm/s'
2485	IF ( TRIM( var ) == 'z0*' ) unit = 'm'
2486
2487
2488	CASE ( 'p', 'pt', 'u', 'v', 'w' )
2489	IF ( TRIM( var ) == 'p' ) unit = 'Pa'
2490	IF ( TRIM( var ) == 'pt' ) unit = 'K'
2491	IF ( TRIM( var ) == 'u' ) unit = 'm/s'
2492	IF ( TRIM( var ) == 'v' ) unit = 'm/s'
2493	IF ( TRIM( var ) == 'w' ) unit = 'm/s'
2494	CONTINUE
2495
2496	CASE DEFAULT
2497	CALL user_check_data_output( var, unit )
2498
2499	IF ( unit == 'illegal' ) THEN
2500	IF ( data_output_user(1) /= ' ' ) THEN
2501	message_string = 'illegal value for data_output or ' // &
2502	'data_output_user = "' // TRIM( data_output(i) ) // '"'
2503	CALL message( 'check_parameters', 'PA0114', 1, 2, 0, 6, 0 )
2504	ELSE
2505	message_string = 'illegal value for data_output =' // &
2506	TRIM( data_output(i) ) // '"'
2507	CALL message( 'check_parameters', 'PA0115', 1, 2, 0, 6, 0 )
2508	ENDIF
2509	ENDIF
2510
2511	END SELECT
2512	!
2513	!-- Set the internal steering parameters appropriately
2514	IF ( k == 0 ) THEN
2515	do3d_no(j) = do3d_no(j) + 1
2516	do3d(j,do3d_no(j)) = data_output(i)
2517	do3d_unit(j,do3d_no(j)) = unit
2518	ELSE
2519	do2d_no(j) = do2d_no(j) + 1
2520	do2d(j,do2d_no(j)) = data_output(i)
2521	do2d_unit(j,do2d_no(j)) = unit
2522	IF ( data_output(i)(ilen-2:ilen) == '_xy' ) THEN
2523	data_output_xy(j) = .TRUE.
2524	ENDIF
2525	IF ( data_output(i)(ilen-2:ilen) == '_xz' ) THEN
2526	data_output_xz(j) = .TRUE.
2527	ENDIF
2528	IF ( data_output(i)(ilen-2:ilen) == '_yz' ) THEN
2529	data_output_yz(j) = .TRUE.
2530	ENDIF
2531	ENDIF
2532
2533	IF ( j == 1 ) THEN
2534	!
2535	!-- Check, if variable is already subject to averaging
2536	found = .FALSE.
2537	DO k = 1, doav_n
2538	IF ( TRIM( doav(k) ) == TRIM( var ) ) found = .TRUE.
2539	ENDDO
2540
2541	IF ( .NOT. found ) THEN
2542	doav_n = doav_n + 1
2543	doav(doav_n) = var
2544	ENDIF
2545	ENDIF
2546
2547	i = i + 1
2548	ENDDO
2549
2550	!
2551	!-- Averaged 2d or 3d output requires that an averaging interval has been set
2552	IF ( doav_n > 0 .AND. averaging_interval == 0.0 ) THEN
2553	WRITE( message_string, * ) 'output of averaged quantity "', &
2554	TRIM( doav(1) ), '_av" requires to set a ', &
2555	'non-zero & averaging interval'
2556	CALL message( 'check_parameters', 'PA0323', 1, 2, 0, 6, 0 )
2557	ENDIF
2558
2559	!
2560	!-- Check sectional planes and store them in one shared array
2561	IF ( ANY( section_xy > nz + 1 ) ) THEN
2562	WRITE( message_string, * ) 'section_xy must be <= nz + 1 = ', nz + 1
2563	CALL message( 'check_parameters', 'PA0319', 1, 2, 0, 6, 0 )
2564	ENDIF
2565	IF ( ANY( section_xz > ny + 1 ) ) THEN
2566	WRITE( message_string, * ) 'section_xz must be <= ny + 1 = ', ny + 1
2567	CALL message( 'check_parameters', 'PA0320', 1, 2, 0, 6, 0 )
2568	ENDIF
2569	IF ( ANY( section_yz > nx + 1 ) ) THEN
2570	WRITE( message_string, * ) 'section_yz must be <= nx + 1 = ', nx + 1
2571	CALL message( 'check_parameters', 'PA0321', 1, 2, 0, 6, 0 )
2572	ENDIF
2573	section(:,1) = section_xy
2574	section(:,2) = section_xz
2575	section(:,3) = section_yz
2576
2577	!
2578	!-- Upper plot limit (grid point value) for 1D profiles
2579	IF ( z_max_do1d == -1.0 ) THEN
2580	nz_do1d = nzt+1
2581	ELSE
2582	DO k = nzb+1, nzt+1
2583	nz_do1d = k
2584	IF ( zw(k) > z_max_do1d ) EXIT
2585	ENDDO
2586	ENDIF
2587
2588	!
2589	!-- Upper plot limit for 2D vertical sections
2590	IF ( z_max_do2d == -1.0 ) z_max_do2d = zu(nzt)
2591	IF ( z_max_do2d < zu(nzb+1) .OR. z_max_do2d > zu(nzt) ) THEN
2592	WRITE( message_string, * ) 'z_max_do2d = ', z_max_do2d, &
2593	' must be >= ', zu(nzb+1), '(zu(nzb+1)) and <= ', zu(nzt), &
2594	' (zu(nzt))'
2595	CALL message( 'check_parameters', 'PA0116', 1, 2, 0, 6, 0 )
2596	ENDIF
2597
2598	!
2599	!-- Upper plot limit for 3D arrays
2600	IF ( nz_do3d == -9999 ) nz_do3d = nzt + 1
2601
2602	!
2603	!-- Determine and check accuracy for compressed 3D plot output
2604	IF ( do3d_compress ) THEN
2605	!
2606	!-- Compression only permissible on T3E machines
2607	IF ( host(1:3) /= 't3e' ) THEN
2608	message_string = 'do3d_compress = .TRUE. not allowed on host "' // &
2609	TRIM( host ) // '"'
2610	CALL message( 'check_parameters', 'PA0117', 1, 2, 0, 6, 0 )
2611	ENDIF
2612
2613	i = 1
2614	DO WHILE ( do3d_comp_prec(i) /= ' ' )
2615
2616	ilen = LEN_TRIM( do3d_comp_prec(i) )
2617	IF ( LLT( do3d_comp_prec(i)(ilen:ilen), '0' ) .OR. &
2618	LGT( do3d_comp_prec(i)(ilen:ilen), '9' ) ) THEN
2619	WRITE( message_string, * ) 'illegal precision: do3d_comp_prec', &
2620	'(', i, ') = "', TRIM(do3d_comp_prec(i)),'"'
2621	CALL message( 'check_parameters', 'PA0118', 1, 2, 0, 6, 0 )
2622	ENDIF
2623
2624	prec = IACHAR( do3d_comp_prec(i)(ilen:ilen) ) - IACHAR( '0' )
2625	var = do3d_comp_prec(i)(1:ilen-1)
2626
2627	SELECT CASE ( var )
2628
2629	CASE ( 'u' )
2630	j = 1
2631	CASE ( 'v' )
2632	j = 2
2633	CASE ( 'w' )
2634	j = 3
2635	CASE ( 'p' )
2636	j = 4
2637	CASE ( 'pt' )
2638	j = 5
2639
2640	CASE DEFAULT
2641	WRITE( message_string, * ) 'unknown variable "', &
2642	TRIM( do3d_comp_prec(i) ), '" given for do3d_comp_prec(', &
2643	i, ')'
2644	CALL message( 'check_parameters', 'PA0119', 1, 2, 0, 6, 0 )
2645
2646	END SELECT
2647
2648	plot_3d_precision(j)%precision = prec
2649	i = i + 1
2650
2651	ENDDO
2652	ENDIF
2653
2654	!
2655	!-- Check the data output format(s)
2656	IF ( data_output_format(1) == ' ' ) THEN
2657	!
2658	!-- Default value
2659	netcdf_output = .TRUE.
2660	ELSE
2661	i = 1
2662	DO WHILE ( data_output_format(i) /= ' ' )
2663
2664	SELECT CASE ( data_output_format(i) )
2665
2666	CASE ( 'netcdf' )
2667	netcdf_output = .TRUE.
2668	CASE ( 'iso2d' )
2669	iso2d_output = .TRUE.
2670	CASE ( 'profil' )
2671	profil_output = .TRUE.
2672	CASE ( 'avs' )
2673	avs_output = .TRUE.
2674
2675	CASE DEFAULT
2676	message_string = 'unknown value for data_output_format "' // &
2677	TRIM( data_output_format(i) ) // '"'
2678	CALL message( 'check_parameters', 'PA0120', 1, 2, 0, 6, 0 )
2679
2680	END SELECT
2681
2682	i = i + 1
2683	IF ( i > 10 ) EXIT
2684
2685	ENDDO
2686
2687	ENDIF
2688
2689	!
2690	!-- Check mask conditions
2691	DO mid = 1, max_masks
2692	IF ( data_output_masks(mid,1) /= ' ' .OR. &
2693	data_output_masks_user(mid,1) /= ' ' ) THEN
2694	masks = masks + 1
2695	ENDIF
2696	ENDDO
2697
2698	IF ( masks < 0 .OR. masks > max_masks ) THEN
2699	WRITE( message_string, * ) 'illegal value: masks must be >= 0 and ', &
2700	'<= ', max_masks, ' (=max_masks)'
2701	CALL message( 'check_parameters', 'PA0325', 1, 2, 0, 6, 0 )
2702	ENDIF
2703	IF ( masks > 0 ) THEN
2704	mask_scale(1) = mask_scale_x
2705	mask_scale(2) = mask_scale_y
2706	mask_scale(3) = mask_scale_z
2707	IF ( ANY( mask_scale <= 0.0 ) ) THEN
2708	WRITE( message_string, * ) &
2709	'illegal value: mask_scale_x, mask_scale_y and mask_scale_z', &
2710	'must be > 0.0'
2711	CALL message( 'check_parameters', 'PA0326', 1, 2, 0, 6, 0 )
2712	ENDIF
2713	!
2714	!-- Generate masks for masked data output
2715	CALL init_masks
2716	ENDIF
2717
2718	!
2719	!-- Check the NetCDF data format
2720	IF ( netcdf_data_format > 2 ) THEN
2721	#if defined( __netcdf4 )
2722	CONTINUE
2723	#else
2724	message_string = 'NetCDF: NetCDF4 format requested but no ' // &
2725	'cpp-directive __netcdf4 given & switch ' // &
2726	'back to 64-bit offset format'
2727	CALL message( 'check_parameters', 'PA0171', 0, 1, 0, 6, 0 )
2728	netcdf_data_format = 2
2729	#endif
2730	ENDIF
2731
2732	!
2733	!-- Check netcdf precison
2734	ldum = .FALSE.
2735	CALL define_netcdf_header( 'ch', ldum, 0 )
2736
2737	!
2738	!-- Check, whether a constant diffusion coefficient shall be used
2739	IF ( km_constant /= -1.0 ) THEN
2740	IF ( km_constant < 0.0 ) THEN
2741	WRITE( message_string, * ) 'km_constant = ', km_constant, ' < 0.0'
2742	CALL message( 'check_parameters', 'PA0121', 1, 2, 0, 6, 0 )
2743	ELSE
2744	IF ( prandtl_number < 0.0 ) THEN
2745	WRITE( message_string, * ) 'prandtl_number = ', prandtl_number, &
2746	' < 0.0'
2747	CALL message( 'check_parameters', 'PA0122', 1, 2, 0, 6, 0 )
2748	ENDIF
2749	constant_diffusion = .TRUE.
2750
2751	IF ( prandtl_layer ) THEN
2752	message_string = 'prandtl_layer is not allowed with fixed ' // &
2753	'value of km'
2754	CALL message( 'check_parameters', 'PA0123', 1, 2, 0, 6, 0 )
2755	ENDIF
2756	ENDIF
2757	ENDIF
2758
2759	!
2760	!-- In case of non-cyclic lateral boundaries, set the default maximum value
2761	!-- for the horizontal diffusivity used within the outflow damping layer,
2762	!-- and check/set the width of the damping layer
2763	IF ( bc_lr /= 'cyclic' ) THEN
2764	IF ( km_damp_max == -1.0 ) THEN
2765	km_damp_max = 0.5 * dx
2766	ENDIF
2767	IF ( outflow_damping_width == -1.0 ) THEN
2768	outflow_damping_width = MIN( 20, nx/2 )
2769	ENDIF
2770	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > nx ) THEN
2771	message_string = 'outflow_damping width out of range'
2772	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
2773	ENDIF
2774	ENDIF
2775
2776	IF ( bc_ns /= 'cyclic' ) THEN
2777	IF ( km_damp_max == -1.0 ) THEN
2778	km_damp_max = 0.5 * dy
2779	ENDIF
2780	IF ( outflow_damping_width == -1.0 ) THEN
2781	outflow_damping_width = MIN( 20, ny/2 )
2782	ENDIF
2783	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > ny ) THEN
2784	message_string = 'outflow_damping width out of range'
2785	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
2786	ENDIF
2787	ENDIF
2788
2789	!
2790	!-- Check value range for rif
2791	IF ( rif_min >= rif_max ) THEN
2792	WRITE( message_string, * ) 'rif_min = ', rif_min, ' must be less ', &
2793	'than rif_max = ', rif_max
2794	CALL message( 'check_parameters', 'PA0125', 1, 2, 0, 6, 0 )
2795	ENDIF
2796
2797	!
2798	!-- Determine upper and lower hight level indices for random perturbations
2799	IF ( disturbance_level_b == -9999999.9 ) THEN
2800	IF ( ocean ) THEN
2801	disturbance_level_b = zu((nzt*2)/3)
2802	disturbance_level_ind_b = ( nzt * 2 ) / 3
2803	ELSE
2804	disturbance_level_b = zu(nzb+3)
2805	disturbance_level_ind_b = nzb + 3
2806	ENDIF
2807	ELSEIF ( disturbance_level_b < zu(3) ) THEN
2808	WRITE( message_string, * ) 'disturbance_level_b = ', &
2809	disturbance_level_b, ' must be >= ', zu(3), '(zu(3))'
2810	CALL message( 'check_parameters', 'PA0126', 1, 2, 0, 6, 0 )
2811	ELSEIF ( disturbance_level_b > zu(nzt-2) ) THEN
2812	WRITE( message_string, * ) 'disturbance_level_b = ', &
2813	disturbance_level_b, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
2814	CALL message( 'check_parameters', 'PA0127', 1, 2, 0, 6, 0 )
2815	ELSE
2816	DO k = 3, nzt-2
2817	IF ( disturbance_level_b <= zu(k) ) THEN
2818	disturbance_level_ind_b = k
2819	EXIT
2820	ENDIF
2821	ENDDO
2822	ENDIF
2823
2824	IF ( disturbance_level_t == -9999999.9 ) THEN
2825	IF ( ocean ) THEN
2826	disturbance_level_t = zu(nzt-3)
2827	disturbance_level_ind_t = nzt - 3
2828	ELSE
2829	disturbance_level_t = zu(nzt/3)
2830	disturbance_level_ind_t = nzt / 3
2831	ENDIF
2832	ELSEIF ( disturbance_level_t > zu(nzt-2) ) THEN
2833	WRITE( message_string, * ) 'disturbance_level_t = ', &
2834	disturbance_level_t, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
2835	CALL message( 'check_parameters', 'PA0128', 1, 2, 0, 6, 0 )
2836	ELSEIF ( disturbance_level_t < disturbance_level_b ) THEN
2837	WRITE( message_string, * ) 'disturbance_level_t = ', &
2838	disturbance_level_t, ' must be >= disturbance_level_b = ', &
2839	disturbance_level_b
2840	CALL message( 'check_parameters', 'PA0129', 1, 2, 0, 6, 0 )
2841	ELSE
2842	DO k = 3, nzt-2
2843	IF ( disturbance_level_t <= zu(k) ) THEN
2844	disturbance_level_ind_t = k
2845	EXIT
2846	ENDIF
2847	ENDDO
2848	ENDIF
2849
2850	!
2851	!-- Check again whether the levels determined this way are ok.
2852	!-- Error may occur at automatic determination and too few grid points in
2853	!-- z-direction.
2854	IF ( disturbance_level_ind_t < disturbance_level_ind_b ) THEN
2855	WRITE( message_string, * ) 'disturbance_level_ind_t = ', &
2856	disturbance_level_ind_t, ' must be >= disturbance_level_b = ', &
2857	disturbance_level_b
2858	CALL message( 'check_parameters', 'PA0130', 1, 2, 0, 6, 0 )
2859	ENDIF
2860
2861	!
2862	!-- Determine the horizontal index range for random perturbations.
2863	!-- In case of non-cyclic horizontal boundaries, no perturbations are imposed
2864	!-- near the inflow and the perturbation area is further limited to ...(1)
2865	!-- after the initial phase of the flow.
2866	dist_nxl = 0; dist_nxr = nx
2867	dist_nys = 0; dist_nyn = ny
2868	IF ( bc_lr /= 'cyclic' ) THEN
2869	IF ( inflow_disturbance_begin == -1 ) THEN
2870	inflow_disturbance_begin = MIN( 10, nx/2 )
2871	ENDIF
2872	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > nx )&
2873	THEN
2874	message_string = 'inflow_disturbance_begin out of range'
2875	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
2876	ENDIF
2877	IF ( inflow_disturbance_end == -1 ) THEN
2878	inflow_disturbance_end = MIN( 100, 3*nx/4 )
2879	ENDIF
2880	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > nx ) &
2881	THEN
2882	message_string = 'inflow_disturbance_end out of range'
2883	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
2884	ENDIF
2885	ELSEIF ( bc_ns /= 'cyclic' ) THEN
2886	IF ( inflow_disturbance_begin == -1 ) THEN
2887	inflow_disturbance_begin = MIN( 10, ny/2 )
2888	ENDIF
2889	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > ny )&
2890	THEN
2891	message_string = 'inflow_disturbance_begin out of range'
2892	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
2893	ENDIF
2894	IF ( inflow_disturbance_end == -1 ) THEN
2895	inflow_disturbance_end = MIN( 100, 3*ny/4 )
2896	ENDIF
2897	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > ny ) &
2898	THEN
2899	message_string = 'inflow_disturbance_end out of range'
2900	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
2901	ENDIF
2902	ENDIF
2903
2904	IF ( bc_lr == 'radiation/dirichlet' ) THEN
2905	dist_nxr = nx - inflow_disturbance_begin
2906	dist_nxl(1) = nx - inflow_disturbance_end
2907	ELSEIF ( bc_lr == 'dirichlet/radiation' ) THEN
2908	dist_nxl = inflow_disturbance_begin
2909	dist_nxr(1) = inflow_disturbance_end
2910	ENDIF
2911	IF ( bc_ns == 'dirichlet/radiation' ) THEN
2912	dist_nyn = ny - inflow_disturbance_begin
2913	dist_nys(1) = ny - inflow_disturbance_end
2914	ELSEIF ( bc_ns == 'radiation/dirichlet' ) THEN
2915	dist_nys = inflow_disturbance_begin
2916	dist_nyn(1) = inflow_disturbance_end
2917	ENDIF
2918
2919	!
2920	!-- A turbulent inflow requires Dirichlet conditions at the respective inflow
2921	!-- boundary (so far, a turbulent inflow is realized from the left side only)
2922	IF ( turbulent_inflow .AND. bc_lr /= 'dirichlet/radiation' ) THEN
2923	message_string = 'turbulent_inflow = .T. requires a Dirichlet ' // &
2924	'condition at the inflow boundary'
2925	CALL message( 'check_parameters', 'PA0133', 1, 2, 0, 6, 0 )
2926	ENDIF
2927
2928	!
2929	!-- In case of turbulent inflow calculate the index of the recycling plane
2930	IF ( turbulent_inflow ) THEN
2931	IF ( recycling_width == 9999999.9 ) THEN
2932	!
2933	!-- Set the default value for the width of the recycling domain
2934	recycling_width = 0.1 * nx * dx
2935	ELSE
2936	IF ( recycling_width < dx .OR. recycling_width > nx * dx ) THEN
2937	WRITE( message_string, * ) 'illegal value for recycling_width:', &
2938	' ', recycling_width
2939	CALL message( 'check_parameters', 'PA0134', 1, 2, 0, 6, 0 )
2940	ENDIF
2941	ENDIF
2942	!
2943	!-- Calculate the index
2944	recycling_plane = recycling_width / dx
2945	ENDIF
2946
2947	!
2948	!-- Check random generator
2949	IF ( random_generator /= 'system-specific' .AND. &
2950	random_generator /= 'numerical-recipes' ) THEN
2951	message_string = 'unknown random generator: random_generator = "' // &
2952	TRIM( random_generator ) // '"'
2953	CALL message( 'check_parameters', 'PA0135', 1, 2, 0, 6, 0 )
2954	ENDIF
2955
2956	!
2957	!-- Determine damping level index for 1D model
2958	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
2959	IF ( damp_level_1d == -1.0 ) THEN
2960	damp_level_1d = zu(nzt+1)
2961	damp_level_ind_1d = nzt + 1
2962	ELSEIF ( damp_level_1d < 0.0 .OR. damp_level_1d > zu(nzt+1) ) THEN
2963	WRITE( message_string, * ) 'damp_level_1d = ', damp_level_1d, &
2964	' must be > 0.0 and < ', zu(nzt+1), '(zu(nzt+1))'
2965	CALL message( 'check_parameters', 'PA0136', 1, 2, 0, 6, 0 )
2966	ELSE
2967	DO k = 1, nzt+1
2968	IF ( damp_level_1d <= zu(k) ) THEN
2969	damp_level_ind_1d = k
2970	EXIT
2971	ENDIF
2972	ENDDO
2973	ENDIF
2974	ENDIF
2975
2976	!
2977	!-- Check some other 1d-model parameters
2978	IF ( TRIM( mixing_length_1d ) /= 'as_in_3d_model' .AND. &
2979	TRIM( mixing_length_1d ) /= 'blackadar' ) THEN
2980	message_string = 'mixing_length_1d = "' // TRIM( mixing_length_1d ) // &
2981	'" is unknown'
2982	CALL message( 'check_parameters', 'PA0137', 1, 2, 0, 6, 0 )
2983	ENDIF
2984	IF ( TRIM( dissipation_1d ) /= 'as_in_3d_model' .AND. &
2985	TRIM( dissipation_1d ) /= 'detering' ) THEN
2986	message_string = 'dissipation_1d = "' // TRIM( dissipation_1d ) // &
2987	'" is unknown'
2988	CALL message( 'check_parameters', 'PA0138', 1, 2, 0, 6, 0 )
2989	ENDIF
2990
2991	!
2992	!-- Set time for the next user defined restart (time_restart is the
2993	!-- internal parameter for steering restart events)
2994	IF ( restart_time /= 9999999.9 ) THEN
2995	IF ( restart_time > time_since_reference_point ) THEN
2996	time_restart = restart_time
2997	ENDIF
2998	ELSE
2999	!
3000	!-- In case of a restart run, set internal parameter to default (no restart)
3001	!-- if the NAMELIST-parameter restart_time is omitted
3002	time_restart = 9999999.9
3003	ENDIF
3004
3005	!
3006	!-- Set default value of the time needed to terminate a model run
3007	IF ( termination_time_needed == -1.0 ) THEN
3008	IF ( host(1:3) == 'ibm' ) THEN
3009	termination_time_needed = 300.0
3010	ELSE
3011	termination_time_needed = 35.0
3012	ENDIF
3013	ENDIF
3014
3015	!
3016	!-- Check the time needed to terminate a model run
3017	IF ( host(1:3) == 't3e' ) THEN
3018	!
3019	!-- Time needed must be at least 30 seconds on all CRAY machines, because
3020	!-- MPP_TREMAIN gives the remaining CPU time only in steps of 30 seconds
3021	IF ( termination_time_needed <= 30.0 ) THEN
3022	WRITE( message_string, * ) 'termination_time_needed = ', &
3023	termination_time_needed, ' must be > 30.0 on host "', &
3024	TRIM( host ), '"'
3025	CALL message( 'check_parameters', 'PA0139', 1, 2, 0, 6, 0 )
3026	ENDIF
3027	ELSEIF ( host(1:3) == 'ibm' ) THEN
3028	!
3029	!-- On IBM-regatta machines the time should be at least 300 seconds,
3030	!-- because the job time consumed before executing palm (for compiling,
3031	!-- copying of files, etc.) has to be regarded
3032	IF ( termination_time_needed < 300.0 ) THEN
3033	WRITE( message_string, * ) 'termination_time_needed = ', &
3034	termination_time_needed, ' should be >= 300.0 on host "', &
3035	TRIM( host ), '"'
3036	CALL message( 'check_parameters', 'PA0140', 1, 2, 0, 6, 0 )
3037	ENDIF
3038	ENDIF
3039
3040	!
3041	!-- Check pressure gradient conditions
3042	IF ( dp_external .AND. conserve_volume_flow ) THEN
3043	WRITE( message_string, * ) 'Both dp_external and conserve_volume_flo', &
3044	'w are .TRUE. but one of them must be .FALSE.'
3045	CALL message( 'check_parameters', 'PA0150', 1, 2, 0, 6, 0 )
3046	ENDIF
3047	IF ( dp_external ) THEN
3048	IF ( dp_level_b < zu(nzb) .OR. dp_level_b > zu(nzt) ) THEN
3049	WRITE( message_string, * ) 'dp_level_b = ', dp_level_b, ' is out ', &
3050	' of range'
3051	CALL message( 'check_parameters', 'PA0151', 1, 2, 0, 6, 0 )
3052	ENDIF
3053	IF ( .NOT. ANY( dpdxy /= 0.0 ) ) THEN
3054	WRITE( message_string, * ) 'dp_external is .TRUE. but dpdxy is ze', &
3055	'ro, i.e. the external pressure gradient & will not be applied'
3056	CALL message( 'check_parameters', 'PA0152', 0, 1, 0, 6, 0 )
3057	ENDIF
3058	ENDIF
3059	IF ( ANY( dpdxy /= 0.0 ) .AND. .NOT. dp_external ) THEN
3060	WRITE( message_string, * ) 'dpdxy is nonzero but dp_external is ', &
3061	'.FALSE., i.e. the external pressure gradient & will not be applied'
3062	CALL message( 'check_parameters', 'PA0153', 0, 1, 0, 6, 0 )
3063	ENDIF
3064	IF ( conserve_volume_flow ) THEN
3065	IF ( TRIM( conserve_volume_flow_mode ) == 'default' ) THEN
3066	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
3067	conserve_volume_flow_mode = 'inflow_profile'
3068	ELSE
3069	conserve_volume_flow_mode = 'initial_profiles'
3070	ENDIF
3071	ELSEIF ( TRIM( conserve_volume_flow_mode ) /= 'initial_profiles' .AND. &
3072	TRIM( conserve_volume_flow_mode ) /= 'inflow_profile' .AND. &
3073	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) THEN
3074	WRITE( message_string, * ) 'unknown conserve_volume_flow_mode: ', &
3075	conserve_volume_flow_mode
3076	CALL message( 'check_parameters', 'PA0154', 1, 2, 0, 6, 0 )
3077	ENDIF
3078	IF ( ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) .AND. &
3079	TRIM( conserve_volume_flow_mode ) /= 'inflow_profile' ) THEN
3080	WRITE( message_string, * ) 'noncyclic boundary conditions ', &
3081	'require & conserve_volume_flow_mode = ''inflow_profile'''
3082	CALL message( 'check_parameters', 'PA0155', 1, 2, 0, 6, 0 )
3083	ENDIF
3084	IF ( bc_lr == 'cyclic' .AND. bc_ns == 'cyclic' .AND. &
3085	TRIM( conserve_volume_flow_mode ) == 'inflow_profile' ) THEN
3086	WRITE( message_string, * ) 'cyclic boundary conditions ', &
3087	'require & conserve_volume_flow_mode = ''initial_profiles''', &
3088	' or ''bulk_velocity'''
3089	CALL message( 'check_parameters', 'PA0156', 1, 2, 0, 6, 0 )
3090	ENDIF
3091	ENDIF
3092	IF ( ( u_bulk /= 0.0 .OR. v_bulk /= 0.0 ) .AND. &
3093	( .NOT. conserve_volume_flow .OR. &
3094	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) ) THEN
3095	WRITE( message_string, * ) 'nonzero bulk velocity requires ', &
3096	'conserve_volume_flow = .T. and & ', &
3097	'conserve_volume_flow_mode = ''bulk_velocity'''
3098	CALL message( 'check_parameters', 'PA0157', 1, 2, 0, 6, 0 )
3099	ENDIF
3100
3101	!
3102	!-- Check particle attributes
3103	IF ( particle_color /= 'none' ) THEN
3104	IF ( particle_color /= 'absuv' .AND. particle_color /= 'pt*' .AND. &
3105	particle_color /= 'z' ) THEN
3106	message_string = 'illegal value for parameter particle_color: ' // &
3107	TRIM( particle_color)
3108	CALL message( 'check_parameters', 'PA0313', 1, 2, 0, 6, 0 )
3109	ELSE
3110	IF ( color_interval(2) <= color_interval(1) ) THEN
3111	message_string = 'color_interval(2) <= color_interval(1)'
3112	CALL message( 'check_parameters', 'PA0315', 1, 2, 0, 6, 0 )
3113	ENDIF
3114	ENDIF
3115	ENDIF
3116
3117	IF ( particle_dvrpsize /= 'none' ) THEN
3118	IF ( particle_dvrpsize /= 'absw' ) THEN
3119	message_string = 'illegal value for parameter particle_dvrpsize:' // &
3120	' ' // TRIM( particle_color)
3121	CALL message( 'check_parameters', 'PA0314', 1, 2, 0, 6, 0 )
3122	ELSE
3123	IF ( dvrpsize_interval(2) <= dvrpsize_interval(1) ) THEN
3124	message_string = 'dvrpsize_interval(2) <= dvrpsize_interval(1)'
3125	CALL message( 'check_parameters', 'PA0316', 1, 2, 0, 6, 0 )
3126	ENDIF
3127	ENDIF
3128	ENDIF
3129
3130	!
3131	!-- Check &userpar parameters
3132	CALL user_check_parameters
3133
3134
3135	END SUBROUTINE check_parameters

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |