Home

Context Navigation

check_parameters.f90 @ 4210

Last change on this file since 4210 was 4196, checked in by gronemeier, 5 years ago

Consider rotation of model domain for claculation of Coriolis force:

check_parameters: Overwrite rotation_angle from namelist by value from static driver;
coriolis: Consider rotation of model domain;
header: Write information about rotation angle;
modules: Added rotation_angle;
netcdf_interface_mod: replaced rotation angle from input-netCDF file by namelist parameter 'rotation_angle';
ocean_mod: Consider rotation of model domain for calculating the Stokes drift;
parin: added rotation_angle to initialization_parameters;

Property svn:keywords set to Id

Property svn:mergeinfo set to False

/palm/branches/chemistry/SOURCE/check_parameters.f90	2047-3190,3218-3297
/palm/branches/forwind/SOURCE/check_parameters.f90	1564-1913
/palm/branches/mosaik_M2/check_parameters.f90	2360-3471
/palm/branches/palm4u/SOURCE/check_parameters.f90	2540-2692
/palm/branches/rans/SOURCE/check_parameters.f90	2078-3128
/palm/branches/resler/SOURCE/check_parameters.f90	2023-3336
/palm/branches/salsa/SOURCE/check_parameters.f90	2503-3581

File size: 137.9 KB

Line
1	!> @file check_parameters.f90
2	!------------------------------------------------------------------------------!
3	! This file is part of the PALM model system.
4	!
5	! PALM is free software: you can redistribute it and/or modify it under the
6	! terms of the GNU General Public License as published by the Free Software
7	! Foundation, either version 3 of the License, or (at your option) any later
8	! version.
9	!
10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
13	!
14	! You should have received a copy of the GNU General Public License along with
15	! PALM. If not, see <http://www.gnu.org/licenses/>.
16	!
17	! Copyright 1997-2019 Leibniz Universitaet Hannover
18	!------------------------------------------------------------------------------!
19	!
20	! Current revisions:
21	! -----------------
22	!
23	!
24	! Former revisions:
25	! -----------------
26	! 4172 2019-08-20 11:55:33Z oliver.maas
27	! Overwrite rotation_angle from namelist by value from static driver
28	!
29	! 11:55:33Z oliver.maas
30	! removed conversion from recycle_absolute_quantities to raq, added check and
31	! error message for correct input of recycling_method_for_thermodynamic_quantities
32	!
33	! 11:55:33Z oliver.maas
34	! Corrected "Former revisions" section
35	!
36	! 11:55:33Z oliver.maas
37	! bugfix error message: replaced PA184 by PA0184
38	!
39	! 11:55:33Z oliver.maas
40	! added conversion from recycle_absolute_quantities to raq for recycling of
41	! absolute quantities and added error message PA184 for not implemented quantities
42	!
43	! 4142 2019-08-05 12:38:31Z suehring
44	! Consider spinup in number of output timesteps for averaged 2D output (merge
45	! from branch resler).
46	!
47	! 4069 2019-07-01 14:05:51Z Giersch
48	! Masked output running index mid has been introduced as a local variable to
49	! avoid runtime error (Loop variable has been modified) in time_integration
50	!
51	! 4048 2019-06-21 21:00:21Z knoop
52	! Moved tcm_check_data_output to module_interface
53	!
54	! 4039 2019-06-18 10:32:41Z suehring
55	! Modularize diagnostic output
56	!
57	! 4017 2019-06-06 12:16:46Z schwenkel
58	! output of turbulence intensity added
59	!
60	! 3933 2019-04-25 12:33:20Z kanani
61	! Alphabetical resorting in CASE, condense settings for theta_2m* into one IF clause
62	!
63	! 3885 2019-04-11 11:29:34Z kanani
64	! Changes related to global restructuring of location messages and introduction
65	! of additional debug messages
66	!
67	! 3766 2019-02-26 16:23:41Z raasch
68	! trim added to avoid truncation compiler warnings
69	!
70	! 3761 2019-02-25 15:31:42Z raasch
71	! unused variables removed
72	!
73	! 3735 2019-02-12 09:52:40Z dom_dwd_user
74	! Passing variable j (averaged output?) to
75	! module_interface.f90:chem_check_data_output.
76	!
77	! 3705 2019-01-29 19:56:39Z suehring
78	! bugfix: renamed thetav_t to vtheta_t
79	!
80	! 3702 2019-01-28 13:19:30Z gronemeier
81	! most_method removed
82	!
83	! 3655 2019-01-07 16:51:22Z knoop
84	! Formatting
85	!
86	! Revision 1.1 1997/08/26 06:29:23 raasch
87	! Initial revision
88	!
89	!
90	! Description:
91	! ------------
92	!> Check control parameters and deduce further quantities.
93	!------------------------------------------------------------------------------!
94	SUBROUTINE check_parameters
95
96
97	USE arrays_3d
98
99	USE basic_constants_and_equations_mod
100
101	USE bulk_cloud_model_mod, &
102	ONLY: bulk_cloud_model
103
104	USE chem_modules
105
106	USE chemistry_model_mod, &
107	ONLY: chem_boundary_conds
108
109	USE control_parameters
110
111	USE grid_variables
112
113	USE kinds
114
115	USE indices
116
117	USE model_1d_mod, &
118	ONLY: damp_level_1d, damp_level_ind_1d
119
120	USE module_interface, &
121	ONLY: module_interface_check_parameters, &
122	module_interface_check_data_output_ts, &
123	module_interface_check_data_output_pr, &
124	module_interface_check_data_output
125
126	USE netcdf_data_input_mod, &
127	ONLY: init_model, input_pids_static, netcdf_data_input_check_dynamic, &
128	netcdf_data_input_check_static
129
130	USE netcdf_interface, &
131	ONLY: dopr_unit, do2d_unit, do3d_unit, netcdf_data_format, &
132	netcdf_data_format_string, dots_unit, heatflux_output_unit, &
133	waterflux_output_unit, momentumflux_output_unit, &
134	dots_max, dots_num, dots_label
135
136	USE particle_attributes, &
137	ONLY: particle_advection, use_sgs_for_particles
138
139	USE pegrid
140
141	USE pmc_interface, &
142	ONLY: cpl_id, nested_run
143
144	USE profil_parameter
145
146	USE statistics
147
148	USE subsidence_mod
149
150	USE transpose_indices
151
152	USE vertical_nesting_mod, &
153	ONLY: vnested, &
154	vnest_check_parameters
155
156
157	IMPLICIT NONE
158
159	CHARACTER (LEN=varnamelength) :: var !< variable name
160	CHARACTER (LEN=7) :: unit !< unit of variable
161	CHARACTER (LEN=8) :: date !< current date string
162	CHARACTER (LEN=10) :: time !< current time string
163	CHARACTER (LEN=20) :: ensemble_string !< string containing number of ensemble member
164	CHARACTER (LEN=15) :: nest_string !< string containing id of nested domain
165	CHARACTER (LEN=40) :: coupling_string !< string containing type of coupling
166	CHARACTER (LEN=100) :: action !< flag string
167
168	INTEGER(iwp) :: i !< loop index
169	INTEGER(iwp) :: ilen !< string length
170	INTEGER(iwp) :: j !< loop index
171	INTEGER(iwp) :: k !< loop index
172	INTEGER(iwp) :: kk !< loop index
173	INTEGER(iwp) :: mid !< masked output running index
174	INTEGER(iwp) :: netcdf_data_format_save !< initial value of netcdf_data_format
175	INTEGER(iwp) :: position !< index position of string
176
177	LOGICAL :: found !< flag, true if output variable is already marked for averaging
178
179	REAL(wp) :: dt_spinup_max !< maximum spinup timestep in nested domains
180	REAL(wp) :: gradient !< local gradient
181	REAL(wp) :: remote = 0.0_wp !< MPI id of remote processor
182	REAL(wp) :: spinup_time_max !< maximum spinup time in nested domains
183	REAL(wp) :: time_to_be_simulated_from_reference_point !< time to be simulated from reference point
184
185
186	CALL location_message( 'checking parameters', 'start' )
187	!
188	!-- At first, check static and dynamic input for consistency
189	CALL netcdf_data_input_check_dynamic
190	CALL netcdf_data_input_check_static
191	!
192	!-- Check for overlap combinations, which are not realized yet
193	IF ( transpose_compute_overlap .AND. numprocs == 1 ) THEN
194	message_string = 'transpose-compute-overlap not implemented for single PE runs'
195	CALL message( 'check_parameters', 'PA0000', 1, 2, 0, 6, 0 )
196	ENDIF
197
198	!
199	!-- Check the coupling mode
200	IF ( coupling_mode /= 'uncoupled' .AND. &
201	coupling_mode /= 'precursor_atmos' .AND. &
202	coupling_mode /= 'precursor_ocean' .AND. &
203	coupling_mode /= 'vnested_crse' .AND. &
204	coupling_mode /= 'vnested_fine' .AND. &
205	coupling_mode /= 'atmosphere_to_ocean' .AND. &
206	coupling_mode /= 'ocean_to_atmosphere' ) THEN
207	message_string = 'illegal coupling mode: ' // TRIM( coupling_mode )
208	CALL message( 'check_parameters', 'PA0002', 1, 2, 0, 6, 0 )
209	ENDIF
210
211	!
212	!-- Check if humidity is set to TRUE in case of the atmospheric run (for coupled runs)
213	IF ( coupling_mode == 'atmosphere_to_ocean' .AND. .NOT. humidity) THEN
214	message_string = ' Humidity has to be set to .T. in the _p3d file ' // &
215	'for coupled runs between ocean and atmosphere.'
216	CALL message( 'check_parameters', 'PA0476', 1, 2, 0, 6, 0 )
217	ENDIF
218
219	!
220	!-- Check dt_coupling, restart_time, dt_restart, end_time, dx, dy, nx and ny
221	IF ( coupling_mode /= 'uncoupled' .AND. &
222	coupling_mode(1:8) /= 'vnested_' .AND. &
223	coupling_mode /= 'precursor_atmos' .AND. &
224	coupling_mode /= 'precursor_ocean' ) THEN
225
226	IF ( dt_coupling == 9999999.9_wp ) THEN
227	message_string = 'dt_coupling is not set but required for coup' // &
228	'ling mode "' // TRIM( coupling_mode ) // '"'
229	CALL message( 'check_parameters', 'PA0003', 1, 2, 0, 6, 0 )
230	ENDIF
231
232	#if defined( __parallel )
233
234
235	IF ( myid == 0 ) THEN
236	CALL MPI_SEND( dt_coupling, 1, MPI_REAL, target_id, 11, comm_inter, &
237	ierr )
238	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 11, comm_inter, &
239	status, ierr )
240	ENDIF
241	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
242
243	IF ( dt_coupling /= remote ) THEN
244	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
245	'": dt_coupling = ', dt_coupling, '& is not equal to ', &
246	'dt_coupling_remote = ', remote
247	CALL message( 'check_parameters', 'PA0004', 1, 2, 0, 6, 0 )
248	ENDIF
249	IF ( dt_coupling <= 0.0_wp ) THEN
250
251	IF ( myid == 0 ) THEN
252	CALL MPI_SEND( dt_max, 1, MPI_REAL, target_id, 19, comm_inter, ierr )
253	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 19, comm_inter, &
254	status, ierr )
255	ENDIF
256	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
257
258	dt_coupling = MAX( dt_max, remote )
259	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
260	'": dt_coupling <= 0.0 & is not allowed and is reset to ', &
261	'MAX(dt_max(A,O)) = ', dt_coupling
262	CALL message( 'check_parameters', 'PA0005', 0, 1, 0, 6, 0 )
263	ENDIF
264
265	IF ( myid == 0 ) THEN
266	CALL MPI_SEND( restart_time, 1, MPI_REAL, target_id, 12, comm_inter, &
267	ierr )
268	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 12, comm_inter, &
269	status, ierr )
270	ENDIF
271	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
272
273	IF ( restart_time /= remote ) THEN
274	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
275	'": restart_time = ', restart_time, '& is not equal to ', &
276	'restart_time_remote = ', remote
277	CALL message( 'check_parameters', 'PA0006', 1, 2, 0, 6, 0 )
278	ENDIF
279
280	IF ( myid == 0 ) THEN
281	CALL MPI_SEND( dt_restart, 1, MPI_REAL, target_id, 13, comm_inter, &
282	ierr )
283	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 13, comm_inter, &
284	status, ierr )
285	ENDIF
286	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
287
288	IF ( dt_restart /= remote ) THEN
289	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
290	'": dt_restart = ', dt_restart, '& is not equal to ', &
291	'dt_restart_remote = ', remote
292	CALL message( 'check_parameters', 'PA0007', 1, 2, 0, 6, 0 )
293	ENDIF
294
295	time_to_be_simulated_from_reference_point = end_time-coupling_start_time
296
297	IF ( myid == 0 ) THEN
298	CALL MPI_SEND( time_to_be_simulated_from_reference_point, 1, &
299	MPI_REAL, target_id, 14, comm_inter, ierr )
300	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 14, comm_inter, &
301	status, ierr )
302	ENDIF
303	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
304
305	IF ( time_to_be_simulated_from_reference_point /= remote ) THEN
306	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
307	'": time_to_be_simulated_from_reference_point = ', &
308	time_to_be_simulated_from_reference_point, '& is not equal ', &
309	'to time_to_be_simulated_from_reference_point_remote = ', &
310	remote
311	CALL message( 'check_parameters', 'PA0008', 1, 2, 0, 6, 0 )
312	ENDIF
313
314	IF ( myid == 0 ) THEN
315	CALL MPI_SEND( dx, 1, MPI_REAL, target_id, 15, comm_inter, ierr )
316	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 15, comm_inter, &
317	status, ierr )
318	ENDIF
319	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
320
321
322	IF ( coupling_mode == 'atmosphere_to_ocean') THEN
323
324	IF ( dx < remote ) THEN
325	WRITE( message_string, * ) 'coupling mode "', &
326	TRIM( coupling_mode ), &
327	'": dx in Atmosphere is not equal to or not larger than dx in ocean'
328	CALL message( 'check_parameters', 'PA0009', 1, 2, 0, 6, 0 )
329	ENDIF
330
331	IF ( (nx_a+1)dx /= (nx_o+1)remote ) THEN
332	WRITE( message_string, * ) 'coupling mode "', &
333	TRIM( coupling_mode ), &
334	'": Domain size in x-direction is not equal in ocean and atmosphere'
335	CALL message( 'check_parameters', 'PA0010', 1, 2, 0, 6, 0 )
336	ENDIF
337
338	ENDIF
339
340	IF ( myid == 0) THEN
341	CALL MPI_SEND( dy, 1, MPI_REAL, target_id, 16, comm_inter, ierr )
342	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 16, comm_inter, &
343	status, ierr )
344	ENDIF
345	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
346
347	IF ( coupling_mode == 'atmosphere_to_ocean') THEN
348
349	IF ( dy < remote ) THEN
350	WRITE( message_string, * ) 'coupling mode "', &
351	TRIM( coupling_mode ), &
352	'": dy in Atmosphere is not equal to or not larger than dy in ocean'
353	CALL message( 'check_parameters', 'PA0011', 1, 2, 0, 6, 0 )
354	ENDIF
355
356	IF ( (ny_a+1)dy /= (ny_o+1)remote ) THEN
357	WRITE( message_string, * ) 'coupling mode "', &
358	TRIM( coupling_mode ), &
359	'": Domain size in y-direction is not equal in ocean and atmosphere'
360	CALL message( 'check_parameters', 'PA0012', 1, 2, 0, 6, 0 )
361	ENDIF
362
363	IF ( MOD(nx_o+1,nx_a+1) /= 0 ) THEN
364	WRITE( message_string, * ) 'coupling mode "', &
365	TRIM( coupling_mode ), &
366	'": nx+1 in ocean is not divisible by nx+1 in', &
367	' atmosphere without remainder'
368	CALL message( 'check_parameters', 'PA0339', 1, 2, 0, 6, 0 )
369	ENDIF
370
371	IF ( MOD(ny_o+1,ny_a+1) /= 0 ) THEN
372	WRITE( message_string, * ) 'coupling mode "', &
373	TRIM( coupling_mode ), &
374	'": ny+1 in ocean is not divisible by ny+1 in', &
375	' atmosphere without remainder'
376
377	CALL message( 'check_parameters', 'PA0340', 1, 2, 0, 6, 0 )
378	ENDIF
379
380	ENDIF
381	#else
382	WRITE( message_string, * ) 'coupling requires PALM to be compiled with',&
383	' cpp-option "-D__parallel"'
384	CALL message( 'check_parameters', 'PA0141', 1, 2, 0, 6, 0 )
385	#endif
386	ENDIF
387
388	#if defined( __parallel )
389	!
390	!-- Exchange via intercommunicator
391	IF ( coupling_mode == 'atmosphere_to_ocean' .AND. myid == 0 ) THEN
392	CALL MPI_SEND( humidity, 1, MPI_LOGICAL, target_id, 19, comm_inter, &
393	ierr )
394	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' .AND. myid == 0) THEN
395	CALL MPI_RECV( humidity_remote, 1, MPI_LOGICAL, target_id, 19, &
396	comm_inter, status, ierr )
397	ENDIF
398	CALL MPI_BCAST( humidity_remote, 1, MPI_LOGICAL, 0, comm2d, ierr)
399
400	#endif
401
402	!
403	!-- User settings for restart times requires that "restart" has been given as
404	!-- file activation string. Otherwise, binary output would not be saved by
405	!-- palmrun.
406	IF ( ( restart_time /= 9999999.9_wp .OR. dt_restart /= 9999999.9_wp ) &
407	.AND. .NOT. write_binary ) THEN
408	WRITE( message_string, * ) 'manual restart settings requires file ', &
409	'activation string "restart"'
410	CALL message( 'check_parameters', 'PA0001', 1, 2, 0, 6, 0 )
411	ENDIF
412
413
414	!
415	!-- Generate the file header which is used as a header for most of PALM's
416	!-- output files
417	CALL DATE_AND_TIME( date, time, run_zone )
418	run_date = date(1:4)//'-'//date(5:6)//'-'//date(7:8)
419	run_time = time(1:2)//':'//time(3:4)//':'//time(5:6)
420	IF ( coupling_mode == 'uncoupled' ) THEN
421	coupling_string = ''
422	ELSEIF ( coupling_mode == 'vnested_crse' ) THEN
423	coupling_string = ' nested (coarse)'
424	ELSEIF ( coupling_mode == 'vnested_fine' ) THEN
425	coupling_string = ' nested (fine)'
426	ELSEIF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
427	coupling_string = ' coupled (atmosphere)'
428	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
429	coupling_string = ' coupled (ocean)'
430	ENDIF
431	IF ( ensemble_member_nr /= 0 ) THEN
432	WRITE( ensemble_string, '(2X,A,I2.2)' ) 'en-no: ', ensemble_member_nr
433	ELSE
434	ensemble_string = ''
435	ENDIF
436	IF ( nested_run ) THEN
437	WRITE( nest_string, '(2X,A,I2.2)' ) 'nest-id: ', cpl_id
438	ELSE
439	nest_string = ''
440	ENDIF
441
442	WRITE ( run_description_header, &
443	'(A,2X,A,2X,A,A,A,I2.2,A,A,A,2X,A,A,2X,A,1X,A)' ) &
444	TRIM( version ), TRIM( revision ), 'run: ', &
445	TRIM( run_identifier ), '.', runnr, TRIM( coupling_string ), &
446	TRIM( nest_string ), TRIM( ensemble_string), 'host: ', TRIM( host ), &
447	run_date, run_time
448
449	!
450	!-- Check the general loop optimization method
451	SELECT CASE ( TRIM( loop_optimization ) )
452
453	CASE ( 'cache', 'vector' )
454	CONTINUE
455
456	CASE DEFAULT
457	message_string = 'illegal value given for loop_optimization: "' // &
458	TRIM( loop_optimization ) // '"'
459	CALL message( 'check_parameters', 'PA0013', 1, 2, 0, 6, 0 )
460
461	END SELECT
462
463	!
464	!-- Check topography setting (check for illegal parameter combinations)
465	IF ( topography /= 'flat' ) THEN
466	action = ' '
467	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'ws-scheme' &
468	) THEN
469	WRITE( action, '(A,A)' ) 'scalar_advec = ', scalar_advec
470	ENDIF
471	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme' )&
472	THEN
473	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
474	ENDIF
475	IF ( psolver == 'sor' ) THEN
476	WRITE( action, '(A,A)' ) 'psolver = ', psolver
477	ENDIF
478	IF ( sloping_surface ) THEN
479	WRITE( action, '(A)' ) 'sloping surface = .TRUE.'
480	ENDIF
481	IF ( galilei_transformation ) THEN
482	WRITE( action, '(A)' ) 'galilei_transformation = .TRUE.'
483	ENDIF
484	IF ( cloud_droplets ) THEN
485	WRITE( action, '(A)' ) 'cloud_droplets = .TRUE.'
486	ENDIF
487	IF ( .NOT. constant_flux_layer ) THEN
488	WRITE( action, '(A)' ) 'constant_flux_layer = .FALSE.'
489	ENDIF
490	IF ( action /= ' ' ) THEN
491	message_string = 'a non-flat topography does not allow ' // &
492	TRIM( action )
493	CALL message( 'check_parameters', 'PA0014', 1, 2, 0, 6, 0 )
494	ENDIF
495
496	ENDIF
497
498	!
499	!-- Check approximation
500	IF ( TRIM( approximation ) /= 'boussinesq' .AND. &
501	TRIM( approximation ) /= 'anelastic' ) THEN
502	message_string = 'unknown approximation: approximation = "' // &
503	TRIM( approximation ) // '"'
504	CALL message( 'check_parameters', 'PA0446', 1, 2, 0, 6, 0 )
505	ENDIF
506
507	!
508	!-- Check approximation requirements
509	IF ( TRIM( approximation ) == 'anelastic' .AND. &
510	TRIM( momentum_advec ) /= 'ws-scheme' ) THEN
511	message_string = 'Anelastic approximation requires ' // &
512	'momentum_advec = "ws-scheme"'
513	CALL message( 'check_parameters', 'PA0447', 1, 2, 0, 6, 0 )
514	ENDIF
515	IF ( TRIM( approximation ) == 'anelastic' .AND. &
516	TRIM( psolver ) == 'multigrid' ) THEN
517	message_string = 'Anelastic approximation currently only supports ' // &
518	'psolver = "poisfft", ' // &
519	'psolver = "sor" and ' // &
520	'psolver = "multigrid_noopt"'
521	CALL message( 'check_parameters', 'PA0448', 1, 2, 0, 6, 0 )
522	ENDIF
523	IF ( TRIM( approximation ) == 'anelastic' .AND. &
524	conserve_volume_flow ) THEN
525	message_string = 'Anelastic approximation is not allowed with ' // &
526	'conserve_volume_flow = .TRUE.'
527	CALL message( 'check_parameters', 'PA0449', 1, 2, 0, 6, 0 )
528	ENDIF
529
530	!
531	!-- Check flux input mode
532	IF ( TRIM( flux_input_mode ) /= 'dynamic' .AND. &
533	TRIM( flux_input_mode ) /= 'kinematic' .AND. &
534	TRIM( flux_input_mode ) /= 'approximation-specific' ) THEN
535	message_string = 'unknown flux input mode: flux_input_mode = "' // &
536	TRIM( flux_input_mode ) // '"'
537	CALL message( 'check_parameters', 'PA0450', 1, 2, 0, 6, 0 )
538	ENDIF
539	!
540	!-- Set flux input mode according to approximation if applicable
541	IF ( TRIM( flux_input_mode ) == 'approximation-specific' ) THEN
542	IF ( TRIM( approximation ) == 'anelastic' ) THEN
543	flux_input_mode = 'dynamic'
544	ELSEIF ( TRIM( approximation ) == 'boussinesq' ) THEN
545	flux_input_mode = 'kinematic'
546	ENDIF
547	ENDIF
548
549	!
550	!-- Check flux output mode
551	IF ( TRIM( flux_output_mode ) /= 'dynamic' .AND. &
552	TRIM( flux_output_mode ) /= 'kinematic' .AND. &
553	TRIM( flux_output_mode ) /= 'approximation-specific' ) THEN
554	message_string = 'unknown flux output mode: flux_output_mode = "' // &
555	TRIM( flux_output_mode ) // '"'
556	CALL message( 'check_parameters', 'PA0451', 1, 2, 0, 6, 0 )
557	ENDIF
558	!
559	!-- Set flux output mode according to approximation if applicable
560	IF ( TRIM( flux_output_mode ) == 'approximation-specific' ) THEN
561	IF ( TRIM( approximation ) == 'anelastic' ) THEN
562	flux_output_mode = 'dynamic'
563	ELSEIF ( TRIM( approximation ) == 'boussinesq' ) THEN
564	flux_output_mode = 'kinematic'
565	ENDIF
566	ENDIF
567
568
569	!
570	!-- When the land- or urban-surface model is used, the flux output must be
571	!-- dynamic.
572	IF ( land_surface .OR. urban_surface ) THEN
573	flux_output_mode = 'dynamic'
574	ENDIF
575
576	!
577	!-- Set the flux output units according to flux_output_mode
578	IF ( TRIM( flux_output_mode ) == 'kinematic' ) THEN
579	heatflux_output_unit = 'K m/s'
580	waterflux_output_unit = 'kg/kg m/s'
581	momentumflux_output_unit = 'm2/s2'
582	ELSEIF ( TRIM( flux_output_mode ) == 'dynamic' ) THEN
583	heatflux_output_unit = 'W/m2'
584	waterflux_output_unit = 'W/m2'
585	momentumflux_output_unit = 'N/m2'
586	ENDIF
587
588	!
589	!-- set time series output units for fluxes
590	dots_unit(14:16) = TRIM( heatflux_output_unit )
591	dots_unit(21) = TRIM( waterflux_output_unit )
592	dots_unit(19:20) = TRIM( momentumflux_output_unit )
593
594	!
595	!-- Add other module specific timeseries
596	CALL module_interface_check_data_output_ts( dots_max, dots_num, dots_label, dots_unit )
597
598	!
599	!-- Check if maximum number of allowed timeseries is exceeded
600	IF ( dots_num > dots_max ) THEN
601	WRITE( message_string, * ) 'number of time series quantities exceeds', &
602	' its maximum of dots_max = ', dots_max, &
603	'&Please increase dots_max in modules.f90.'
604	CALL message( 'init_3d_model', 'PA0194', 1, 2, 0, 6, 0 )
605	ENDIF
606
607	!
608	!-- Check whether there are any illegal values
609	!-- Pressure solver:
610	IF ( psolver /= 'poisfft' .AND. psolver /= 'sor' .AND. &
611	psolver /= 'multigrid' .AND. psolver /= 'multigrid_noopt' ) THEN
612	message_string = 'unknown solver for perturbation pressure: psolver' // &
613	' = "' // TRIM( psolver ) // '"'
614	CALL message( 'check_parameters', 'PA0016', 1, 2, 0, 6, 0 )
615	ENDIF
616
617	IF ( psolver(1:9) == 'multigrid' ) THEN
618	IF ( cycle_mg == 'w' ) THEN
619	gamma_mg = 2
620	ELSEIF ( cycle_mg == 'v' ) THEN
621	gamma_mg = 1
622	ELSE
623	message_string = 'unknown multigrid cycle: cycle_mg = "' // &
624	TRIM( cycle_mg ) // '"'
625	CALL message( 'check_parameters', 'PA0020', 1, 2, 0, 6, 0 )
626	ENDIF
627	ENDIF
628
629	IF ( fft_method /= 'singleton-algorithm' .AND. &
630	fft_method /= 'temperton-algorithm' .AND. &
631	fft_method /= 'fftw' .AND. &
632	fft_method /= 'system-specific' ) THEN
633	message_string = 'unknown fft-algorithm: fft_method = "' // &
634	TRIM( fft_method ) // '"'
635	CALL message( 'check_parameters', 'PA0021', 1, 2, 0, 6, 0 )
636	ENDIF
637
638	IF( momentum_advec == 'ws-scheme' .AND. &
639	.NOT. call_psolver_at_all_substeps ) THEN
640	message_string = 'psolver must be called at each RK3 substep when "'// &
641	TRIM(momentum_advec) // ' "is used for momentum_advec'
642	CALL message( 'check_parameters', 'PA0344', 1, 2, 0, 6, 0 )
643	END IF
644	!
645	!-- Advection schemes:
646	IF ( momentum_advec /= 'pw-scheme' .AND. &
647	momentum_advec /= 'ws-scheme' .AND. &
648	momentum_advec /= 'up-scheme' ) &
649	THEN
650	message_string = 'unknown advection scheme: momentum_advec = "' // &
651	TRIM( momentum_advec ) // '"'
652	CALL message( 'check_parameters', 'PA0022', 1, 2, 0, 6, 0 )
653	ENDIF
654	IF ( ( momentum_advec == 'ws-scheme' .OR. scalar_advec == 'ws-scheme' ) &
655	.AND. ( timestep_scheme == 'euler' .OR. &
656	timestep_scheme == 'runge-kutta-2' ) ) &
657	THEN
658	message_string = 'momentum_advec or scalar_advec = "' &
659	// TRIM( momentum_advec ) // '" is not allowed with ' // &
660	'timestep_scheme = "' // TRIM( timestep_scheme ) // '"'
661	CALL message( 'check_parameters', 'PA0023', 1, 2, 0, 6, 0 )
662	ENDIF
663	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'ws-scheme' .AND. &
664	scalar_advec /= 'bc-scheme' .AND. scalar_advec /= 'up-scheme' ) &
665	THEN
666	message_string = 'unknown advection scheme: scalar_advec = "' // &
667	TRIM( scalar_advec ) // '"'
668	CALL message( 'check_parameters', 'PA0024', 1, 2, 0, 6, 0 )
669	ENDIF
670	IF ( scalar_advec == 'bc-scheme' .AND. loop_optimization == 'cache' ) &
671	THEN
672	message_string = 'advection_scheme scalar_advec = "' &
673	// TRIM( scalar_advec ) // '" not implemented for ' // &
674	'loop_optimization = "' // TRIM( loop_optimization ) // '"'
675	CALL message( 'check_parameters', 'PA0026', 1, 2, 0, 6, 0 )
676	ENDIF
677
678	IF ( use_sgs_for_particles .AND. .NOT. cloud_droplets .AND. &
679	.NOT. use_upstream_for_tke .AND. &
680	scalar_advec /= 'ws-scheme' &
681	) THEN
682	use_upstream_for_tke = .TRUE.
683	message_string = 'use_upstream_for_tke is set to .TRUE. because ' // &
684	'use_sgs_for_particles = .TRUE. ' // &
685	'and scalar_advec /= ws-scheme'
686	CALL message( 'check_parameters', 'PA0025', 0, 1, 0, 6, 0 )
687	ENDIF
688
689	!
690	!-- Set LOGICAL switches to enhance performance
691	IF ( momentum_advec == 'ws-scheme' ) ws_scheme_mom = .TRUE.
692	IF ( scalar_advec == 'ws-scheme' ) ws_scheme_sca = .TRUE.
693
694
695	!
696	!-- Timestep schemes:
697	SELECT CASE ( TRIM( timestep_scheme ) )
698
699	CASE ( 'euler' )
700	intermediate_timestep_count_max = 1
701
702	CASE ( 'runge-kutta-2' )
703	intermediate_timestep_count_max = 2
704
705	CASE ( 'runge-kutta-3' )
706	intermediate_timestep_count_max = 3
707
708	CASE DEFAULT
709	message_string = 'unknown timestep scheme: timestep_scheme = "' // &
710	TRIM( timestep_scheme ) // '"'
711	CALL message( 'check_parameters', 'PA0027', 1, 2, 0, 6, 0 )
712
713	END SELECT
714
715	IF ( (momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme') &
716	.AND. timestep_scheme(1:5) == 'runge' ) THEN
717	message_string = 'momentum advection scheme "' // &
718	TRIM( momentum_advec ) // '" & does not work with ' // &
719	'timestep_scheme "' // TRIM( timestep_scheme ) // '"'
720	CALL message( 'check_parameters', 'PA0029', 1, 2, 0, 6, 0 )
721	ENDIF
722	!
723	!-- Check for proper settings for microphysics
724	IF ( bulk_cloud_model .AND. cloud_droplets ) THEN
725	message_string = 'bulk_cloud_model = .TRUE. is not allowed with ' // &
726	'cloud_droplets = .TRUE.'
727	CALL message( 'check_parameters', 'PA0442', 1, 2, 0, 6, 0 )
728	ENDIF
729
730	!
731	!-- Initializing actions must have been set by the user
732	IF ( TRIM( initializing_actions ) == '' ) THEN
733	message_string = 'no value specified for initializing_actions'
734	CALL message( 'check_parameters', 'PA0149', 1, 2, 0, 6, 0 )
735	ENDIF
736
737	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
738	TRIM( initializing_actions ) /= 'cyclic_fill' ) THEN
739	!
740	!-- No restart run: several initialising actions are possible
741	action = initializing_actions
742	DO WHILE ( TRIM( action ) /= '' )
743	position = INDEX( action, ' ' )
744	SELECT CASE ( action(1:position-1) )
745
746	CASE ( 'set_constant_profiles', 'set_1d-model_profiles', &
747	'by_user', 'initialize_vortex', 'initialize_ptanom', &
748	'initialize_bubble', 'inifor' )
749	action = action(position+1:)
750
751	CASE DEFAULT
752	message_string = 'initializing_action = "' // &
753	TRIM( action ) // '" unknown or not allowed'
754	CALL message( 'check_parameters', 'PA0030', 1, 2, 0, 6, 0 )
755
756	END SELECT
757	ENDDO
758	ENDIF
759
760	IF ( TRIM( initializing_actions ) == 'initialize_vortex' .AND. &
761	conserve_volume_flow ) THEN
762	message_string = 'initializing_actions = "initialize_vortex"' // &
763	' is not allowed with conserve_volume_flow = .T.'
764	CALL message( 'check_parameters', 'PA0343', 1, 2, 0, 6, 0 )
765	ENDIF
766
767
768	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
769	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
770	message_string = 'initializing_actions = "set_constant_profiles"' // &
771	' and "set_1d-model_profiles" are not allowed ' // &
772	'simultaneously'
773	CALL message( 'check_parameters', 'PA0031', 1, 2, 0, 6, 0 )
774	ENDIF
775
776	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
777	INDEX( initializing_actions, 'by_user' ) /= 0 ) THEN
778	message_string = 'initializing_actions = "set_constant_profiles"' // &
779	' and "by_user" are not allowed simultaneously'
780	CALL message( 'check_parameters', 'PA0032', 1, 2, 0, 6, 0 )
781	ENDIF
782
783	IF ( INDEX( initializing_actions, 'by_user' ) /= 0 .AND. &
784	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
785	message_string = 'initializing_actions = "by_user" and ' // &
786	'"set_1d-model_profiles" are not allowed simultaneously'
787	CALL message( 'check_parameters', 'PA0033', 1, 2, 0, 6, 0 )
788	ENDIF
789	!
790	!-- In case of spinup and nested run, spinup end time must be identical
791	!-- in order to have synchronously running simulations.
792	IF ( nested_run ) THEN
793	#if defined( __parallel )
794	CALL MPI_ALLREDUCE( spinup_time, spinup_time_max, 1, MPI_REAL, &
795	MPI_MAX, MPI_COMM_WORLD, ierr )
796	CALL MPI_ALLREDUCE( dt_spinup, dt_spinup_max, 1, MPI_REAL, &
797	MPI_MAX, MPI_COMM_WORLD, ierr )
798
799	IF ( spinup_time /= spinup_time_max .OR. dt_spinup /= dt_spinup_max ) &
800	THEN
801	message_string = 'In case of nesting, spinup_time and ' // &
802	'dt_spinup must be identical in all parent ' // &
803	'and child domains.'
804	CALL message( 'check_parameters', 'PA0489', 3, 2, 0, 6, 0 )
805	ENDIF
806	#endif
807	ENDIF
808
809	IF ( bulk_cloud_model .AND. .NOT. humidity ) THEN
810	WRITE( message_string, * ) 'bulk_cloud_model = ', bulk_cloud_model, &
811	' is not allowed with humidity = ', humidity
812	CALL message( 'check_parameters', 'PA0034', 1, 2, 0, 6, 0 )
813	ENDIF
814
815	IF ( humidity .AND. sloping_surface ) THEN
816	message_string = 'humidity = .TRUE. and sloping_surface = .TRUE. ' // &
817	'are not allowed simultaneously'
818	CALL message( 'check_parameters', 'PA0036', 1, 2, 0, 6, 0 )
819	ENDIF
820
821	!-- Check the module settings
822	CALL module_interface_check_parameters
823
824	!
825	!-- In case of no restart run, check initialising parameters and calculate
826	!-- further quantities
827	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
828
829	!
830	!-- Initial profiles for 1D and 3D model, respectively (u,v further below)
831	pt_init = pt_surface
832	IF ( humidity ) q_init = q_surface
833	IF ( passive_scalar ) s_init = s_surface
834
835	!--
836	!-- If required, compute initial profile of the geostrophic wind
837	!-- (component ug)
838	i = 1
839	gradient = 0.0_wp
840
841	IF ( .NOT. ocean_mode ) THEN
842
843	ug_vertical_gradient_level_ind(1) = 0
844	ug(0) = ug_surface
845	DO k = 1, nzt+1
846	IF ( i < 11 ) THEN
847	IF ( ug_vertical_gradient_level(i) < zu(k) .AND. &
848	ug_vertical_gradient_level(i) >= 0.0_wp ) THEN
849	gradient = ug_vertical_gradient(i) / 100.0_wp
850	ug_vertical_gradient_level_ind(i) = k - 1
851	i = i + 1
852	ENDIF
853	ENDIF
854	IF ( gradient /= 0.0_wp ) THEN
855	IF ( k /= 1 ) THEN
856	ug(k) = ug(k-1) + dzu(k) * gradient
857	ELSE
858	ug(k) = ug_surface + dzu(k) * gradient
859	ENDIF
860	ELSE
861	ug(k) = ug(k-1)
862	ENDIF
863	ENDDO
864
865	ELSE
866
867	ug_vertical_gradient_level_ind(1) = nzt+1
868	ug(nzt+1) = ug_surface
869	DO k = nzt, nzb, -1
870	IF ( i < 11 ) THEN
871	IF ( ug_vertical_gradient_level(i) > zu(k) .AND. &
872	ug_vertical_gradient_level(i) <= 0.0_wp ) THEN
873	gradient = ug_vertical_gradient(i) / 100.0_wp
874	ug_vertical_gradient_level_ind(i) = k + 1
875	i = i + 1
876	ENDIF
877	ENDIF
878	IF ( gradient /= 0.0_wp ) THEN
879	IF ( k /= nzt ) THEN
880	ug(k) = ug(k+1) - dzu(k+1) * gradient
881	ELSE
882	ug(k) = ug_surface - 0.5_wp * dzu(k+1) * gradient
883	ug(k+1) = ug_surface + 0.5_wp * dzu(k+1) * gradient
884	ENDIF
885	ELSE
886	ug(k) = ug(k+1)
887	ENDIF
888	ENDDO
889
890	ENDIF
891
892	!
893	!-- In case of no given gradients for ug, choose a zero gradient
894	IF ( ug_vertical_gradient_level(1) == -9999999.9_wp ) THEN
895	ug_vertical_gradient_level(1) = 0.0_wp
896	ENDIF
897
898	!
899	!--
900	!-- If required, compute initial profile of the geostrophic wind
901	!-- (component vg)
902	i = 1
903	gradient = 0.0_wp
904
905	IF ( .NOT. ocean_mode ) THEN
906
907	vg_vertical_gradient_level_ind(1) = 0
908	vg(0) = vg_surface
909	DO k = 1, nzt+1
910	IF ( i < 11 ) THEN
911	IF ( vg_vertical_gradient_level(i) < zu(k) .AND. &
912	vg_vertical_gradient_level(i) >= 0.0_wp ) THEN
913	gradient = vg_vertical_gradient(i) / 100.0_wp
914	vg_vertical_gradient_level_ind(i) = k - 1
915	i = i + 1
916	ENDIF
917	ENDIF
918	IF ( gradient /= 0.0_wp ) THEN
919	IF ( k /= 1 ) THEN
920	vg(k) = vg(k-1) + dzu(k) * gradient
921	ELSE
922	vg(k) = vg_surface + dzu(k) * gradient
923	ENDIF
924	ELSE
925	vg(k) = vg(k-1)
926	ENDIF
927	ENDDO
928
929	ELSE
930
931	vg_vertical_gradient_level_ind(1) = nzt+1
932	vg(nzt+1) = vg_surface
933	DO k = nzt, nzb, -1
934	IF ( i < 11 ) THEN
935	IF ( vg_vertical_gradient_level(i) > zu(k) .AND. &
936	vg_vertical_gradient_level(i) <= 0.0_wp ) THEN
937	gradient = vg_vertical_gradient(i) / 100.0_wp
938	vg_vertical_gradient_level_ind(i) = k + 1
939	i = i + 1
940	ENDIF
941	ENDIF
942	IF ( gradient /= 0.0_wp ) THEN
943	IF ( k /= nzt ) THEN
944	vg(k) = vg(k+1) - dzu(k+1) * gradient
945	ELSE
946	vg(k) = vg_surface - 0.5_wp * dzu(k+1) * gradient
947	vg(k+1) = vg_surface + 0.5_wp * dzu(k+1) * gradient
948	ENDIF
949	ELSE
950	vg(k) = vg(k+1)
951	ENDIF
952	ENDDO
953
954	ENDIF
955
956	!
957	!-- In case of no given gradients for vg, choose a zero gradient
958	IF ( vg_vertical_gradient_level(1) == -9999999.9_wp ) THEN
959	vg_vertical_gradient_level(1) = 0.0_wp
960	ENDIF
961
962	!
963	!-- Let the initial wind profiles be the calculated ug/vg profiles or
964	!-- interpolate them from wind profile data (if given)
965	IF ( u_profile(1) == 9999999.9_wp .AND. v_profile(1) == 9999999.9_wp ) THEN
966
967	u_init = ug
968	v_init = vg
969
970	ELSEIF ( u_profile(1) == 0.0_wp .AND. v_profile(1) == 0.0_wp ) THEN
971
972	IF ( uv_heights(1) /= 0.0_wp ) THEN
973	message_string = 'uv_heights(1) must be 0.0'
974	CALL message( 'check_parameters', 'PA0345', 1, 2, 0, 6, 0 )
975	ENDIF
976
977	IF ( omega /= 0.0_wp ) THEN
978	message_string = 'Coriolis force must be switched off (by setting omega=0.0)' // &
979	' when prescribing the forcing by u_profile and v_profile'
980	CALL message( 'check_parameters', 'PA0347', 1, 2, 0, 6, 0 )
981	ENDIF
982
983	use_prescribed_profile_data = .TRUE.
984
985	kk = 1
986	u_init(0) = 0.0_wp
987	v_init(0) = 0.0_wp
988
989	DO k = 1, nz+1
990
991	IF ( kk < 200 ) THEN
992	DO WHILE ( uv_heights(kk+1) <= zu(k) )
993	kk = kk + 1
994	IF ( kk == 200 ) EXIT
995	ENDDO
996	ENDIF
997
998	IF ( kk < 200 .AND. uv_heights(kk+1) /= 9999999.9_wp ) THEN
999	u_init(k) = u_profile(kk) + ( zu(k) - uv_heights(kk) ) / &
1000	( uv_heights(kk+1) - uv_heights(kk) ) * &
1001	( u_profile(kk+1) - u_profile(kk) )
1002	v_init(k) = v_profile(kk) + ( zu(k) - uv_heights(kk) ) / &
1003	( uv_heights(kk+1) - uv_heights(kk) ) * &
1004	( v_profile(kk+1) - v_profile(kk) )
1005	ELSE
1006	u_init(k) = u_profile(kk)
1007	v_init(k) = v_profile(kk)
1008	ENDIF
1009
1010	ENDDO
1011
1012	ELSE
1013
1014	message_string = 'u_profile(1) and v_profile(1) must be 0.0'
1015	CALL message( 'check_parameters', 'PA0346', 1, 2, 0, 6, 0 )
1016
1017	ENDIF
1018
1019	!
1020	!-- Compute initial temperature profile using the given temperature gradients
1021	IF ( .NOT. neutral ) THEN
1022	CALL init_vertical_profiles( pt_vertical_gradient_level_ind, &
1023	pt_vertical_gradient_level, &
1024	pt_vertical_gradient, pt_init, &
1025	pt_surface, bc_pt_t_val )
1026	ENDIF
1027	!
1028	!-- Compute initial humidity profile using the given humidity gradients
1029	IF ( humidity ) THEN
1030	CALL init_vertical_profiles( q_vertical_gradient_level_ind, &
1031	q_vertical_gradient_level, &
1032	q_vertical_gradient, q_init, &
1033	q_surface, bc_q_t_val )
1034	ENDIF
1035	!
1036	!-- Compute initial scalar profile using the given scalar gradients
1037	IF ( passive_scalar ) THEN
1038	CALL init_vertical_profiles( s_vertical_gradient_level_ind, &
1039	s_vertical_gradient_level, &
1040	s_vertical_gradient, s_init, &
1041	s_surface, bc_s_t_val )
1042	ENDIF
1043	!
1044	!-- TODO
1045	!-- Compute initial chemistry profile using the given chemical species gradients
1046	!-- Russo: Is done in chem_init --> kanani: Revise
1047
1048	ENDIF
1049
1050	!
1051	!-- Check if the control parameter use_subsidence_tendencies is used correctly
1052	IF ( use_subsidence_tendencies .AND. .NOT. large_scale_subsidence ) THEN
1053	message_string = 'The usage of use_subsidence_tendencies ' // &
1054	'requires large_scale_subsidence = .T..'
1055	CALL message( 'check_parameters', 'PA0396', 1, 2, 0, 6, 0 )
1056	ELSEIF ( use_subsidence_tendencies .AND. .NOT. large_scale_forcing ) THEN
1057	message_string = 'The usage of use_subsidence_tendencies ' // &
1058	'requires large_scale_forcing = .T..'
1059	CALL message( 'check_parameters', 'PA0397', 1, 2, 0, 6, 0 )
1060	ENDIF
1061
1062	!
1063	!-- Initialize large scale subsidence if required
1064	If ( large_scale_subsidence ) THEN
1065	IF ( subs_vertical_gradient_level(1) /= -9999999.9_wp .AND. &
1066	.NOT. large_scale_forcing ) THEN
1067	CALL init_w_subsidence
1068	ENDIF
1069	!
1070	!-- In case large_scale_forcing is used, profiles for subsidence velocity
1071	!-- are read in from file LSF_DATA
1072
1073	IF ( subs_vertical_gradient_level(1) == -9999999.9_wp .AND. &
1074	.NOT. large_scale_forcing ) THEN
1075	message_string = 'There is no default large scale vertical ' // &
1076	'velocity profile set. Specify the subsidence ' // &
1077	'velocity profile via subs_vertical_gradient ' // &
1078	'and subs_vertical_gradient_level.'
1079	CALL message( 'check_parameters', 'PA0380', 1, 2, 0, 6, 0 )
1080	ENDIF
1081	ELSE
1082	IF ( subs_vertical_gradient_level(1) /= -9999999.9_wp ) THEN
1083	message_string = 'Enable usage of large scale subsidence by ' // &
1084	'setting large_scale_subsidence = .T..'
1085	CALL message( 'check_parameters', 'PA0381', 1, 2, 0, 6, 0 )
1086	ENDIF
1087	ENDIF
1088
1089	!
1090	!-- Overwrite parameters from namelist if necessary and compute Coriolis parameter.
1091	!-- @todo - move initialization of f and fs to coriolis_mod.
1092	IF ( input_pids_static ) THEN
1093	latitude = init_model%latitude
1094	longitude = init_model%longitude
1095	rotation_angle = init_model%rotation_angle
1096	ENDIF
1097
1098	f = 2.0_wp * omega * SIN( latitude / 180.0_wp * pi )
1099	fs = 2.0_wp * omega * COS( latitude / 180.0_wp * pi )
1100
1101	!
1102	!-- Check and set buoyancy related parameters and switches
1103	IF ( reference_state == 'horizontal_average' ) THEN
1104	CONTINUE
1105	ELSEIF ( reference_state == 'initial_profile' ) THEN
1106	use_initial_profile_as_reference = .TRUE.
1107	ELSEIF ( reference_state == 'single_value' ) THEN
1108	use_single_reference_value = .TRUE.
1109	IF ( pt_reference == 9999999.9_wp ) pt_reference = pt_surface
1110	vpt_reference = pt_reference * ( 1.0_wp + 0.61_wp * q_surface )
1111	ELSE
1112	message_string = 'illegal value for reference_state: "' // &
1113	TRIM( reference_state ) // '"'
1114	CALL message( 'check_parameters', 'PA0056', 1, 2, 0, 6, 0 )
1115	ENDIF
1116
1117	!
1118	!-- In case of a given slope, compute the relevant quantities
1119	IF ( alpha_surface /= 0.0_wp ) THEN
1120	IF ( ABS( alpha_surface ) > 90.0_wp ) THEN
1121	WRITE( message_string, * ) 'ABS( alpha_surface = ', alpha_surface, &
1122	' ) must be < 90.0'
1123	CALL message( 'check_parameters', 'PA0043', 1, 2, 0, 6, 0 )
1124	ENDIF
1125	sloping_surface = .TRUE.
1126	cos_alpha_surface = COS( alpha_surface / 180.0_wp * pi )
1127	sin_alpha_surface = SIN( alpha_surface / 180.0_wp * pi )
1128	ENDIF
1129
1130	!
1131	!-- Check time step and cfl_factor
1132	IF ( dt /= -1.0_wp ) THEN
1133	IF ( dt <= 0.0_wp ) THEN
1134	WRITE( message_string, * ) 'dt = ', dt , ' <= 0.0'
1135	CALL message( 'check_parameters', 'PA0044', 1, 2, 0, 6, 0 )
1136	ENDIF
1137	dt_3d = dt
1138	dt_fixed = .TRUE.
1139	ENDIF
1140
1141	IF ( cfl_factor <= 0.0_wp .OR. cfl_factor > 1.0_wp ) THEN
1142	IF ( cfl_factor == -1.0_wp ) THEN
1143	IF ( timestep_scheme == 'runge-kutta-2' ) THEN
1144	cfl_factor = 0.8_wp
1145	ELSEIF ( timestep_scheme == 'runge-kutta-3' ) THEN
1146	cfl_factor = 0.9_wp
1147	ELSE
1148	cfl_factor = 0.9_wp
1149	ENDIF
1150	ELSE
1151	WRITE( message_string, * ) 'cfl_factor = ', cfl_factor, &
1152	' out of range &0.0 < cfl_factor <= 1.0 is required'
1153	CALL message( 'check_parameters', 'PA0045', 1, 2, 0, 6, 0 )
1154	ENDIF
1155	ENDIF
1156
1157	!
1158	!-- Store simulated time at begin
1159	simulated_time_at_begin = simulated_time
1160
1161	!
1162	!-- Store reference time for coupled runs and change the coupling flag,
1163	!-- if ...
1164	IF ( simulated_time == 0.0_wp ) THEN
1165	IF ( coupling_start_time == 0.0_wp ) THEN
1166	time_since_reference_point = 0.0_wp
1167	ELSEIF ( time_since_reference_point < 0.0_wp ) THEN
1168	run_coupled = .FALSE.
1169	ENDIF
1170	ENDIF
1171
1172	!
1173	!-- Set wind speed in the Galilei-transformed system
1174	IF ( galilei_transformation ) THEN
1175	IF ( use_ug_for_galilei_tr .AND. &
1176	ug_vertical_gradient_level(1) == 0.0_wp .AND. &
1177	ug_vertical_gradient(1) == 0.0_wp .AND. &
1178	vg_vertical_gradient_level(1) == 0.0_wp .AND. &
1179	vg_vertical_gradient(1) == 0.0_wp ) THEN
1180	u_gtrans = ug_surface * 0.6_wp
1181	v_gtrans = vg_surface * 0.6_wp
1182	ELSEIF ( use_ug_for_galilei_tr .AND. &
1183	( ug_vertical_gradient_level(1) /= 0.0_wp .OR. &
1184	ug_vertical_gradient(1) /= 0.0_wp ) ) THEN
1185	message_string = 'baroclinity (ug) not allowed simultaneously' // &
1186	' with galilei transformation'
1187	CALL message( 'check_parameters', 'PA0046', 1, 2, 0, 6, 0 )
1188	ELSEIF ( use_ug_for_galilei_tr .AND. &
1189	( vg_vertical_gradient_level(1) /= 0.0_wp .OR. &
1190	vg_vertical_gradient(1) /= 0.0_wp ) ) THEN
1191	message_string = 'baroclinity (vg) not allowed simultaneously' // &
1192	' with galilei transformation'
1193	CALL message( 'check_parameters', 'PA0047', 1, 2, 0, 6, 0 )
1194	ELSE
1195	message_string = 'variable translation speed used for Galilei-' // &
1196	'transformation, which may cause & instabilities in stably ' // &
1197	'stratified regions'
1198	CALL message( 'check_parameters', 'PA0048', 0, 1, 0, 6, 0 )
1199	ENDIF
1200	ENDIF
1201
1202	!
1203	!-- In case of using a prandtl-layer, calculated (or prescribed) surface
1204	!-- fluxes have to be used in the diffusion-terms
1205	IF ( constant_flux_layer ) use_surface_fluxes = .TRUE.
1206
1207	!
1208	!-- Check boundary conditions and set internal variables:
1209	!-- Attention: the lateral boundary conditions have been already checked in
1210	!-- parin
1211	!
1212	!-- Non-cyclic lateral boundaries require the multigrid method and Piascek-
1213	!-- Willimas or Wicker - Skamarock advection scheme. Several schemes
1214	!-- and tools do not work with non-cyclic boundary conditions.
1215	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
1216	IF ( psolver(1:9) /= 'multigrid' ) THEN
1217	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1218	'psolver = "' // TRIM( psolver ) // '"'
1219	CALL message( 'check_parameters', 'PA0051', 1, 2, 0, 6, 0 )
1220	ENDIF
1221	IF ( momentum_advec /= 'pw-scheme' .AND. &
1222	momentum_advec /= 'ws-scheme' ) THEN
1223
1224	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1225	'momentum_advec = "' // TRIM( momentum_advec ) // '"'
1226	CALL message( 'check_parameters', 'PA0052', 1, 2, 0, 6, 0 )
1227	ENDIF
1228	IF ( scalar_advec /= 'pw-scheme' .AND. &
1229	scalar_advec /= 'ws-scheme' ) THEN
1230	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1231	'scalar_advec = "' // TRIM( scalar_advec ) // '"'
1232	CALL message( 'check_parameters', 'PA0053', 1, 2, 0, 6, 0 )
1233	ENDIF
1234	IF ( galilei_transformation ) THEN
1235	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1236	'galilei_transformation = .T.'
1237	CALL message( 'check_parameters', 'PA0054', 1, 2, 0, 6, 0 )
1238	ENDIF
1239	ENDIF
1240
1241	!
1242	!-- Bottom boundary condition for the turbulent Kinetic energy
1243	IF ( bc_e_b == 'neumann' ) THEN
1244	ibc_e_b = 1
1245	ELSEIF ( bc_e_b == '(u)*2+neumann' ) THEN
1246	ibc_e_b = 2
1247	IF ( .NOT. constant_flux_layer ) THEN
1248	bc_e_b = 'neumann'
1249	ibc_e_b = 1
1250	message_string = 'boundary condition bc_e_b changed to "' // &
1251	TRIM( bc_e_b ) // '"'
1252	CALL message( 'check_parameters', 'PA0057', 0, 1, 0, 6, 0 )
1253	ENDIF
1254	ELSE
1255	message_string = 'unknown boundary condition: bc_e_b = "' // &
1256	TRIM( bc_e_b ) // '"'
1257	CALL message( 'check_parameters', 'PA0058', 1, 2, 0, 6, 0 )
1258	ENDIF
1259
1260	!
1261	!-- Boundary conditions for perturbation pressure
1262	IF ( bc_p_b == 'dirichlet' ) THEN
1263	ibc_p_b = 0
1264	ELSEIF ( bc_p_b == 'neumann' ) THEN
1265	ibc_p_b = 1
1266	ELSE
1267	message_string = 'unknown boundary condition: bc_p_b = "' // &
1268	TRIM( bc_p_b ) // '"'
1269	CALL message( 'check_parameters', 'PA0059', 1, 2, 0, 6, 0 )
1270	ENDIF
1271
1272	IF ( bc_p_t == 'dirichlet' ) THEN
1273	ibc_p_t = 0
1274	!-- TO_DO: later set bc_p_t to neumann before, in case of nested domain
1275	ELSEIF ( bc_p_t == 'neumann' .OR. bc_p_t == 'nested' ) THEN
1276	ibc_p_t = 1
1277	ELSE
1278	message_string = 'unknown boundary condition: bc_p_t = "' // &
1279	TRIM( bc_p_t ) // '"'
1280	CALL message( 'check_parameters', 'PA0061', 1, 2, 0, 6, 0 )
1281	ENDIF
1282
1283	!
1284	!-- Boundary conditions for potential temperature
1285	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
1286	ibc_pt_b = 2
1287	ELSE
1288	IF ( bc_pt_b == 'dirichlet' ) THEN
1289	ibc_pt_b = 0
1290	ELSEIF ( bc_pt_b == 'neumann' ) THEN
1291	ibc_pt_b = 1
1292	ELSE
1293	message_string = 'unknown boundary condition: bc_pt_b = "' // &
1294	TRIM( bc_pt_b ) // '"'
1295	CALL message( 'check_parameters', 'PA0062', 1, 2, 0, 6, 0 )
1296	ENDIF
1297	ENDIF
1298
1299	IF ( bc_pt_t == 'dirichlet' ) THEN
1300	ibc_pt_t = 0
1301	ELSEIF ( bc_pt_t == 'neumann' ) THEN
1302	ibc_pt_t = 1
1303	ELSEIF ( bc_pt_t == 'initial_gradient' ) THEN
1304	ibc_pt_t = 2
1305	ELSEIF ( bc_pt_t == 'nested' .OR. bc_pt_t == 'nesting_offline' ) THEN
1306	ibc_pt_t = 3
1307	ELSE
1308	message_string = 'unknown boundary condition: bc_pt_t = "' // &
1309	TRIM( bc_pt_t ) // '"'
1310	CALL message( 'check_parameters', 'PA0063', 1, 2, 0, 6, 0 )
1311	ENDIF
1312
1313	IF ( ANY( wall_heatflux /= 0.0_wp ) .AND. &
1314	surface_heatflux == 9999999.9_wp ) THEN
1315	message_string = 'wall_heatflux additionally requires ' // &
1316	'setting of surface_heatflux'
1317	CALL message( 'check_parameters', 'PA0443', 1, 2, 0, 6, 0 )
1318	ENDIF
1319
1320	!
1321	! This IF clause needs revision, got too complex!!
1322	IF ( surface_heatflux == 9999999.9_wp ) THEN
1323	constant_heatflux = .FALSE.
1324	IF ( large_scale_forcing .OR. land_surface .OR. urban_surface ) THEN
1325	IF ( ibc_pt_b == 0 ) THEN
1326	constant_heatflux = .FALSE.
1327	ELSEIF ( ibc_pt_b == 1 ) THEN
1328	constant_heatflux = .TRUE.
1329	surface_heatflux = 0.0_wp
1330	ENDIF
1331	ENDIF
1332	ELSE
1333	constant_heatflux = .TRUE.
1334	ENDIF
1335
1336	IF ( top_heatflux == 9999999.9_wp ) constant_top_heatflux = .FALSE.
1337
1338	IF ( neutral ) THEN
1339
1340	IF ( surface_heatflux /= 0.0_wp .AND. &
1341	surface_heatflux /= 9999999.9_wp ) THEN
1342	message_string = 'heatflux must not be set for pure neutral flow'
1343	CALL message( 'check_parameters', 'PA0351', 1, 2, 0, 6, 0 )
1344	ENDIF
1345
1346	IF ( top_heatflux /= 0.0_wp .AND. top_heatflux /= 9999999.9_wp ) &
1347	THEN
1348	message_string = 'heatflux must not be set for pure neutral flow'
1349	CALL message( 'check_parameters', 'PA0351', 1, 2, 0, 6, 0 )
1350	ENDIF
1351
1352	ENDIF
1353
1354	IF ( top_momentumflux_u /= 9999999.9_wp .AND. &
1355	top_momentumflux_v /= 9999999.9_wp ) THEN
1356	constant_top_momentumflux = .TRUE.
1357	ELSEIF ( .NOT. ( top_momentumflux_u == 9999999.9_wp .AND. &
1358	top_momentumflux_v == 9999999.9_wp ) ) THEN
1359	message_string = 'both, top_momentumflux_u AND top_momentumflux_v ' // &
1360	'must be set'
1361	CALL message( 'check_parameters', 'PA0064', 1, 2, 0, 6, 0 )
1362	ENDIF
1363
1364	!
1365	!-- A given surface temperature implies Dirichlet boundary condition for
1366	!-- temperature. In this case specification of a constant heat flux is
1367	!-- forbidden.
1368	IF ( ibc_pt_b == 0 .AND. constant_heatflux .AND. &
1369	surface_heatflux /= 0.0_wp ) THEN
1370	message_string = 'boundary_condition: bc_pt_b = "' // TRIM( bc_pt_b ) //&
1371	'& is not allowed with constant_heatflux = .TRUE.'
1372	CALL message( 'check_parameters', 'PA0065', 1, 2, 0, 6, 0 )
1373	ENDIF
1374	IF ( constant_heatflux .AND. pt_surface_initial_change /= 0.0_wp ) THEN
1375	WRITE ( message_string, * ) 'constant_heatflux = .TRUE. is not allo', &
1376	'wed with pt_surface_initial_change (/=0) = ', &
1377	pt_surface_initial_change
1378	CALL message( 'check_parameters', 'PA0066', 1, 2, 0, 6, 0 )
1379	ENDIF
1380
1381	!
1382	!-- A given temperature at the top implies Dirichlet boundary condition for
1383	!-- temperature. In this case specification of a constant heat flux is
1384	!-- forbidden.
1385	IF ( ibc_pt_t == 0 .AND. constant_top_heatflux .AND. &
1386	top_heatflux /= 0.0_wp ) THEN
1387	message_string = 'boundary_condition: bc_pt_t = "' // TRIM( bc_pt_t ) //&
1388	'" is not allowed with constant_top_heatflux = .TRUE.'
1389	CALL message( 'check_parameters', 'PA0067', 1, 2, 0, 6, 0 )
1390	ENDIF
1391
1392	!
1393	!-- Set boundary conditions for total water content
1394	IF ( humidity ) THEN
1395
1396	IF ( ANY( wall_humidityflux /= 0.0_wp ) .AND. &
1397	surface_waterflux == 9999999.9_wp ) THEN
1398	message_string = 'wall_humidityflux additionally requires ' // &
1399	'setting of surface_waterflux'
1400	CALL message( 'check_parameters', 'PA0444', 1, 2, 0, 6, 0 )
1401	ENDIF
1402
1403	CALL set_bc_scalars( 'q', bc_q_b, bc_q_t, ibc_q_b, ibc_q_t, &
1404	'PA0071', 'PA0072' )
1405
1406	IF ( surface_waterflux == 9999999.9_wp ) THEN
1407	constant_waterflux = .FALSE.
1408	IF ( large_scale_forcing .OR. land_surface ) THEN
1409	IF ( ibc_q_b == 0 ) THEN
1410	constant_waterflux = .FALSE.
1411	ELSEIF ( ibc_q_b == 1 ) THEN
1412	constant_waterflux = .TRUE.
1413	ENDIF
1414	ENDIF
1415	ELSE
1416	constant_waterflux = .TRUE.
1417	ENDIF
1418
1419	CALL check_bc_scalars( 'q', bc_q_b, ibc_q_b, 'PA0073', 'PA0074', &
1420	constant_waterflux, q_surface_initial_change )
1421
1422	ENDIF
1423
1424	IF ( passive_scalar ) THEN
1425
1426	IF ( ANY( wall_scalarflux /= 0.0_wp ) .AND. &
1427	surface_scalarflux == 9999999.9_wp ) THEN
1428	message_string = 'wall_scalarflux additionally requires ' // &
1429	'setting of surface_scalarflux'
1430	CALL message( 'check_parameters', 'PA0445', 1, 2, 0, 6, 0 )
1431	ENDIF
1432
1433	IF ( surface_scalarflux == 9999999.9_wp ) constant_scalarflux = .FALSE.
1434
1435	CALL set_bc_scalars( 's', bc_s_b, bc_s_t, ibc_s_b, ibc_s_t, &
1436	'PA0071', 'PA0072' )
1437
1438	CALL check_bc_scalars( 's', bc_s_b, ibc_s_b, 'PA0073', 'PA0074', &
1439	constant_scalarflux, s_surface_initial_change )
1440
1441	IF ( top_scalarflux == 9999999.9_wp ) constant_top_scalarflux = .FALSE.
1442	!
1443	!-- A fixed scalar concentration at the top implies Dirichlet boundary
1444	!-- condition for scalar. Hence, in this case specification of a constant
1445	!-- scalar flux is forbidden.
1446	IF ( ( ibc_s_t == 0 .OR. ibc_s_t == 2 ) .AND. constant_top_scalarflux &
1447	.AND. top_scalarflux /= 0.0_wp ) THEN
1448	message_string = 'boundary condition: bc_s_t = "' // &
1449	TRIM( bc_s_t ) // '" is not allowed with ' // &
1450	'top_scalarflux /= 0.0'
1451	CALL message( 'check_parameters', 'PA0441', 1, 2, 0, 6, 0 )
1452	ENDIF
1453	ENDIF
1454
1455	!
1456	!-- Boundary conditions for chemical species
1457	IF ( air_chemistry ) CALL chem_boundary_conds( 'init' )
1458
1459	!
1460	!-- Boundary conditions for horizontal components of wind speed
1461	IF ( bc_uv_b == 'dirichlet' ) THEN
1462	ibc_uv_b = 0
1463	ELSEIF ( bc_uv_b == 'neumann' ) THEN
1464	ibc_uv_b = 1
1465	IF ( constant_flux_layer ) THEN
1466	message_string = 'boundary condition: bc_uv_b = "' // &
1467	TRIM( bc_uv_b ) // '" is not allowed with constant_flux_layer' &
1468	// ' = .TRUE.'
1469	CALL message( 'check_parameters', 'PA0075', 1, 2, 0, 6, 0 )
1470	ENDIF
1471	ELSE
1472	message_string = 'unknown boundary condition: bc_uv_b = "' // &
1473	TRIM( bc_uv_b ) // '"'
1474	CALL message( 'check_parameters', 'PA0076', 1, 2, 0, 6, 0 )
1475	ENDIF
1476	!
1477	!-- In case of coupled simulations u and v at the ground in atmosphere will be
1478	!-- assigned with the u and v values of the ocean surface
1479	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
1480	ibc_uv_b = 2
1481	ENDIF
1482
1483	IF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
1484	bc_uv_t = 'neumann'
1485	ibc_uv_t = 1
1486	ELSE
1487	IF ( bc_uv_t == 'dirichlet' .OR. bc_uv_t == 'dirichlet_0' ) THEN
1488	ibc_uv_t = 0
1489	IF ( bc_uv_t == 'dirichlet_0' ) THEN
1490	!
1491	!-- Velocities for the initial u,v-profiles are set zero at the top
1492	!-- in case of dirichlet_0 conditions
1493	u_init(nzt+1) = 0.0_wp
1494	v_init(nzt+1) = 0.0_wp
1495	ENDIF
1496	ELSEIF ( bc_uv_t == 'neumann' ) THEN
1497	ibc_uv_t = 1
1498	ELSEIF ( bc_uv_t == 'nested' .OR. bc_uv_t == 'nesting_offline' ) THEN
1499	ibc_uv_t = 3
1500	ELSE
1501	message_string = 'unknown boundary condition: bc_uv_t = "' // &
1502	TRIM( bc_uv_t ) // '"'
1503	CALL message( 'check_parameters', 'PA0077', 1, 2, 0, 6, 0 )
1504	ENDIF
1505	ENDIF
1506
1507	!
1508	!-- Compute and check, respectively, the Rayleigh Damping parameter
1509	IF ( rayleigh_damping_factor == -1.0_wp ) THEN
1510	rayleigh_damping_factor = 0.0_wp
1511	ELSE
1512	IF ( rayleigh_damping_factor < 0.0_wp .OR. &
1513	rayleigh_damping_factor > 1.0_wp ) THEN
1514	WRITE( message_string, * ) 'rayleigh_damping_factor = ', &
1515	rayleigh_damping_factor, ' out of range [0.0,1.0]'
1516	CALL message( 'check_parameters', 'PA0078', 1, 2, 0, 6, 0 )
1517	ENDIF
1518	ENDIF
1519
1520	IF ( rayleigh_damping_height == -1.0_wp ) THEN
1521	IF ( .NOT. ocean_mode ) THEN
1522	rayleigh_damping_height = 0.66666666666_wp * zu(nzt)
1523	ELSE
1524	rayleigh_damping_height = 0.66666666666_wp * zu(nzb)
1525	ENDIF
1526	ELSE
1527	IF ( .NOT. ocean_mode ) THEN
1528	IF ( rayleigh_damping_height < 0.0_wp .OR. &
1529	rayleigh_damping_height > zu(nzt) ) THEN
1530	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
1531	rayleigh_damping_height, ' out of range [0.0,', zu(nzt), ']'
1532	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
1533	ENDIF
1534	ELSE
1535	IF ( rayleigh_damping_height > 0.0_wp .OR. &
1536	rayleigh_damping_height < zu(nzb) ) THEN
1537	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
1538	rayleigh_damping_height, ' out of range [0.0,', zu(nzb), ']'
1539	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
1540	ENDIF
1541	ENDIF
1542	ENDIF
1543
1544	!
1545	!-- Check number of chosen statistic regions
1546	IF ( statistic_regions < 0 ) THEN
1547	WRITE ( message_string, * ) 'number of statistic_regions = ', &
1548	statistic_regions+1, ' is not allowed'
1549	CALL message( 'check_parameters', 'PA0082', 1, 2, 0, 6, 0 )
1550	ENDIF
1551	IF ( normalizing_region > statistic_regions .OR. &
1552	normalizing_region < 0) THEN
1553	WRITE ( message_string, * ) 'normalizing_region = ', &
1554	normalizing_region, ' must be >= 0 and <= ',statistic_regions, &
1555	' (value of statistic_regions)'
1556	CALL message( 'check_parameters', 'PA0083', 1, 2, 0, 6, 0 )
1557	ENDIF
1558
1559	!
1560	!-- Set the default intervals for data output, if necessary
1561	!-- NOTE: dt_dosp has already been set in spectra_parin
1562	IF ( dt_data_output /= 9999999.9_wp ) THEN
1563	IF ( dt_dopr == 9999999.9_wp ) dt_dopr = dt_data_output
1564	IF ( dt_dopts == 9999999.9_wp ) dt_dopts = dt_data_output
1565	IF ( dt_do2d_xy == 9999999.9_wp ) dt_do2d_xy = dt_data_output
1566	IF ( dt_do2d_xz == 9999999.9_wp ) dt_do2d_xz = dt_data_output
1567	IF ( dt_do2d_yz == 9999999.9_wp ) dt_do2d_yz = dt_data_output
1568	IF ( dt_do3d == 9999999.9_wp ) dt_do3d = dt_data_output
1569	IF ( dt_data_output_av == 9999999.9_wp ) dt_data_output_av = dt_data_output
1570	DO mid = 1, max_masks
1571	IF ( dt_domask(mid) == 9999999.9_wp ) dt_domask(mid) = dt_data_output
1572	ENDDO
1573	ENDIF
1574
1575	!
1576	!-- Set the default skip time intervals for data output, if necessary
1577	IF ( skip_time_dopr == 9999999.9_wp ) &
1578	skip_time_dopr = skip_time_data_output
1579	IF ( skip_time_do2d_xy == 9999999.9_wp ) &
1580	skip_time_do2d_xy = skip_time_data_output
1581	IF ( skip_time_do2d_xz == 9999999.9_wp ) &
1582	skip_time_do2d_xz = skip_time_data_output
1583	IF ( skip_time_do2d_yz == 9999999.9_wp ) &
1584	skip_time_do2d_yz = skip_time_data_output
1585	IF ( skip_time_do3d == 9999999.9_wp ) &
1586	skip_time_do3d = skip_time_data_output
1587	IF ( skip_time_data_output_av == 9999999.9_wp ) &
1588	skip_time_data_output_av = skip_time_data_output
1589	DO mid = 1, max_masks
1590	IF ( skip_time_domask(mid) == 9999999.9_wp ) &
1591	skip_time_domask(mid) = skip_time_data_output
1592	ENDDO
1593
1594	!
1595	!-- Check the average intervals (first for 3d-data, then for profiles)
1596	IF ( averaging_interval > dt_data_output_av ) THEN
1597	WRITE( message_string, * ) 'averaging_interval = ', &
1598	averaging_interval, ' must be <= dt_data_output_av = ', &
1599	dt_data_output_av
1600	CALL message( 'check_parameters', 'PA0085', 1, 2, 0, 6, 0 )
1601	ENDIF
1602
1603	IF ( averaging_interval_pr == 9999999.9_wp ) THEN
1604	averaging_interval_pr = averaging_interval
1605	ENDIF
1606
1607	IF ( averaging_interval_pr > dt_dopr ) THEN
1608	WRITE( message_string, * ) 'averaging_interval_pr = ', &
1609	averaging_interval_pr, ' must be <= dt_dopr = ', dt_dopr
1610	CALL message( 'check_parameters', 'PA0086', 1, 2, 0, 6, 0 )
1611	ENDIF
1612
1613	!
1614	!-- Set the default interval for profiles entering the temporal average
1615	IF ( dt_averaging_input_pr == 9999999.9_wp ) THEN
1616	dt_averaging_input_pr = dt_averaging_input
1617	ENDIF
1618
1619	!
1620	!-- Set the default interval for the output of timeseries to a reasonable
1621	!-- value (tries to minimize the number of calls of flow_statistics)
1622	IF ( dt_dots == 9999999.9_wp ) THEN
1623	IF ( averaging_interval_pr == 0.0_wp ) THEN
1624	dt_dots = MIN( dt_run_control, dt_dopr )
1625	ELSE
1626	dt_dots = MIN( dt_run_control, dt_averaging_input_pr )
1627	ENDIF
1628	ENDIF
1629
1630	!
1631	!-- Check the sample rate for averaging (first for 3d-data, then for profiles)
1632	IF ( dt_averaging_input > averaging_interval ) THEN
1633	WRITE( message_string, * ) 'dt_averaging_input = ', &
1634	dt_averaging_input, ' must be <= averaging_interval = ', &
1635	averaging_interval
1636	CALL message( 'check_parameters', 'PA0088', 1, 2, 0, 6, 0 )
1637	ENDIF
1638
1639	IF ( dt_averaging_input_pr > averaging_interval_pr ) THEN
1640	WRITE( message_string, * ) 'dt_averaging_input_pr = ', &
1641	dt_averaging_input_pr, ' must be <= averaging_interval_pr = ', &
1642	averaging_interval_pr
1643	CALL message( 'check_parameters', 'PA0089', 1, 2, 0, 6, 0 )
1644	ENDIF
1645
1646	!
1647	!-- Determine the number of output profiles and check whether they are
1648	!-- permissible
1649	DO WHILE ( data_output_pr(dopr_n+1) /= ' ' )
1650
1651	dopr_n = dopr_n + 1
1652	i = dopr_n
1653
1654	!
1655	!-- Determine internal profile number (for hom, homs)
1656	!-- and store height levels
1657	SELECT CASE ( TRIM( data_output_pr(i) ) )
1658
1659	CASE ( 'u', '#u' )
1660	dopr_index(i) = 1
1661	dopr_unit(i) = 'm/s'
1662	hom(:,2,1,:) = SPREAD( zu, 2, statistic_regions+1 )
1663	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1664	dopr_initial_index(i) = 5
1665	hom(:,2,5,:) = SPREAD( zu, 2, statistic_regions+1 )
1666	data_output_pr(i) = data_output_pr(i)(2:)
1667	ENDIF
1668
1669	CASE ( 'v', '#v' )
1670	dopr_index(i) = 2
1671	dopr_unit(i) = 'm/s'
1672	hom(:,2,2,:) = SPREAD( zu, 2, statistic_regions+1 )
1673	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1674	dopr_initial_index(i) = 6
1675	hom(:,2,6,:) = SPREAD( zu, 2, statistic_regions+1 )
1676	data_output_pr(i) = data_output_pr(i)(2:)
1677	ENDIF
1678
1679	CASE ( 'w' )
1680	dopr_index(i) = 3
1681	dopr_unit(i) = 'm/s'
1682	hom(:,2,3,:) = SPREAD( zw, 2, statistic_regions+1 )
1683
1684	CASE ( 'theta', '#theta' )
1685	IF ( .NOT. bulk_cloud_model ) THEN
1686	dopr_index(i) = 4
1687	dopr_unit(i) = 'K'
1688	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
1689	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1690	dopr_initial_index(i) = 7
1691	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
1692	hom(nzb,2,7,:) = 0.0_wp ! because zu(nzb) is negative
1693	data_output_pr(i) = data_output_pr(i)(2:)
1694	ENDIF
1695	ELSE
1696	dopr_index(i) = 43
1697	dopr_unit(i) = 'K'
1698	hom(:,2,43,:) = SPREAD( zu, 2, statistic_regions+1 )
1699	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1700	dopr_initial_index(i) = 28
1701	hom(:,2,28,:) = SPREAD( zu, 2, statistic_regions+1 )
1702	hom(nzb,2,28,:) = 0.0_wp ! because zu(nzb) is negative
1703	data_output_pr(i) = data_output_pr(i)(2:)
1704	ENDIF
1705	ENDIF
1706
1707	CASE ( 'e', '#e' )
1708	dopr_index(i) = 8
1709	dopr_unit(i) = 'm2/s2'
1710	hom(:,2,8,:) = SPREAD( zu, 2, statistic_regions+1 )
1711	hom(nzb,2,8,:) = 0.0_wp
1712	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1713	dopr_initial_index(i) = 8
1714	hom(:,2,8,:) = SPREAD( zu, 2, statistic_regions+1 )
1715	data_output_pr(i) = data_output_pr(i)(2:)
1716	ENDIF
1717
1718	CASE ( 'km', '#km' )
1719	dopr_index(i) = 9
1720	dopr_unit(i) = 'm2/s'
1721	hom(:,2,9,:) = SPREAD( zu, 2, statistic_regions+1 )
1722	hom(nzb,2,9,:) = 0.0_wp
1723	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1724	dopr_initial_index(i) = 23
1725	hom(:,2,23,:) = hom(:,2,9,:)
1726	data_output_pr(i) = data_output_pr(i)(2:)
1727	ENDIF
1728
1729	CASE ( 'kh', '#kh' )
1730	dopr_index(i) = 10
1731	dopr_unit(i) = 'm2/s'
1732	hom(:,2,10,:) = SPREAD( zu, 2, statistic_regions+1 )
1733	hom(nzb,2,10,:) = 0.0_wp
1734	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1735	dopr_initial_index(i) = 24
1736	hom(:,2,24,:) = hom(:,2,10,:)
1737	data_output_pr(i) = data_output_pr(i)(2:)
1738	ENDIF
1739
1740	CASE ( 'l', '#l' )
1741	dopr_index(i) = 11
1742	dopr_unit(i) = 'm'
1743	hom(:,2,11,:) = SPREAD( zu, 2, statistic_regions+1 )
1744	hom(nzb,2,11,:) = 0.0_wp
1745	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1746	dopr_initial_index(i) = 25
1747	hom(:,2,25,:) = hom(:,2,11,:)
1748	data_output_pr(i) = data_output_pr(i)(2:)
1749	ENDIF
1750
1751	CASE ( 'w"u"' )
1752	dopr_index(i) = 12
1753	dopr_unit(i) = TRIM ( momentumflux_output_unit )
1754	hom(:,2,12,:) = SPREAD( zw, 2, statistic_regions+1 )
1755	IF ( constant_flux_layer ) hom(nzb,2,12,:) = zu(1)
1756
1757	CASE ( 'wu' )
1758	dopr_index(i) = 13
1759	dopr_unit(i) = TRIM ( momentumflux_output_unit )
1760	hom(:,2,13,:) = SPREAD( zw, 2, statistic_regions+1 )
1761
1762	CASE ( 'w"v"' )
1763	dopr_index(i) = 14
1764	dopr_unit(i) = TRIM ( momentumflux_output_unit )
1765	hom(:,2,14,:) = SPREAD( zw, 2, statistic_regions+1 )
1766	IF ( constant_flux_layer ) hom(nzb,2,14,:) = zu(1)
1767
1768	CASE ( 'wv' )
1769	dopr_index(i) = 15
1770	dopr_unit(i) = TRIM ( momentumflux_output_unit )
1771	hom(:,2,15,:) = SPREAD( zw, 2, statistic_regions+1 )
1772
1773	CASE ( 'w"theta"' )
1774	dopr_index(i) = 16
1775	dopr_unit(i) = TRIM ( heatflux_output_unit )
1776	hom(:,2,16,:) = SPREAD( zw, 2, statistic_regions+1 )
1777
1778	CASE ( 'wtheta' )
1779	dopr_index(i) = 17
1780	dopr_unit(i) = TRIM ( heatflux_output_unit )
1781	hom(:,2,17,:) = SPREAD( zw, 2, statistic_regions+1 )
1782
1783	CASE ( 'wtheta' )
1784	dopr_index(i) = 18
1785	dopr_unit(i) = TRIM ( heatflux_output_unit )
1786	hom(:,2,18,:) = SPREAD( zw, 2, statistic_regions+1 )
1787
1788	CASE ( 'wu' )
1789	dopr_index(i) = 19
1790	dopr_unit(i) = TRIM ( momentumflux_output_unit )
1791	hom(:,2,19,:) = SPREAD( zw, 2, statistic_regions+1 )
1792	IF ( constant_flux_layer ) hom(nzb,2,19,:) = zu(1)
1793
1794	CASE ( 'wv' )
1795	dopr_index(i) = 20
1796	dopr_unit(i) = TRIM ( momentumflux_output_unit )
1797	hom(:,2,20,:) = SPREAD( zw, 2, statistic_regions+1 )
1798	IF ( constant_flux_layer ) hom(nzb,2,20,:) = zu(1)
1799
1800	CASE ( 'wthetaBC' )
1801	dopr_index(i) = 21
1802	dopr_unit(i) = TRIM ( heatflux_output_unit )
1803	hom(:,2,21,:) = SPREAD( zw, 2, statistic_regions+1 )
1804
1805	CASE ( 'wthetaBC' )
1806	dopr_index(i) = 22
1807	dopr_unit(i) = TRIM ( heatflux_output_unit )
1808	hom(:,2,22,:) = SPREAD( zw, 2, statistic_regions+1 )
1809
1810	CASE ( 'u*2' )
1811	dopr_index(i) = 30
1812	dopr_unit(i) = 'm2/s2'
1813	hom(:,2,30,:) = SPREAD( zu, 2, statistic_regions+1 )
1814
1815	CASE ( 'v*2' )
1816	dopr_index(i) = 31
1817	dopr_unit(i) = 'm2/s2'
1818	hom(:,2,31,:) = SPREAD( zu, 2, statistic_regions+1 )
1819
1820	CASE ( 'w*2' )
1821	dopr_index(i) = 32
1822	dopr_unit(i) = 'm2/s2'
1823	hom(:,2,32,:) = SPREAD( zw, 2, statistic_regions+1 )
1824
1825	CASE ( 'theta*2' )
1826	dopr_index(i) = 33
1827	dopr_unit(i) = 'K2'
1828	hom(:,2,33,:) = SPREAD( zu, 2, statistic_regions+1 )
1829
1830	CASE ( 'e*' )
1831	dopr_index(i) = 34
1832	dopr_unit(i) = 'm2/s2'
1833	hom(:,2,34,:) = SPREAD( zu, 2, statistic_regions+1 )
1834
1835	CASE ( 'w2theta' )
1836	dopr_index(i) = 35
1837	dopr_unit(i) = 'K m2/s2'
1838	hom(:,2,35,:) = SPREAD( zw, 2, statistic_regions+1 )
1839
1840	CASE ( 'wtheta2' )
1841	dopr_index(i) = 36
1842	dopr_unit(i) = 'K2 m/s'
1843	hom(:,2,36,:) = SPREAD( zw, 2, statistic_regions+1 )
1844
1845	CASE ( 'we' )
1846	dopr_index(i) = 37
1847	dopr_unit(i) = 'm3/s3'
1848	hom(:,2,37,:) = SPREAD( zw, 2, statistic_regions+1 )
1849
1850	CASE ( 'w*3' )
1851	dopr_index(i) = 38
1852	dopr_unit(i) = 'm3/s3'
1853	hom(:,2,38,:) = SPREAD( zw, 2, statistic_regions+1 )
1854
1855	CASE ( 'Sw' )
1856	dopr_index(i) = 39
1857	dopr_unit(i) = 'none'
1858	hom(:,2,39,:) = SPREAD( zw, 2, statistic_regions+1 )
1859
1860	CASE ( 'p' )
1861	dopr_index(i) = 40
1862	dopr_unit(i) = 'Pa'
1863	hom(:,2,40,:) = SPREAD( zu, 2, statistic_regions+1 )
1864
1865	CASE ( 'q', '#q' )
1866	IF ( .NOT. humidity ) THEN
1867	message_string = 'data_output_pr = ' // &
1868	TRIM( data_output_pr(i) ) // ' is not imp' // &
1869	'lemented for humidity = .FALSE.'
1870	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
1871	ELSE
1872	dopr_index(i) = 41
1873	dopr_unit(i) = 'kg/kg'
1874	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
1875	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1876	dopr_initial_index(i) = 26
1877	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1878	hom(nzb,2,26,:) = 0.0_wp ! because zu(nzb) is negative
1879	data_output_pr(i) = data_output_pr(i)(2:)
1880	ENDIF
1881	ENDIF
1882
1883	CASE ( 's', '#s' )
1884	IF ( .NOT. passive_scalar ) THEN
1885	message_string = 'data_output_pr = ' // &
1886	TRIM( data_output_pr(i) ) // ' is not imp' // &
1887	'lemented for passive_scalar = .FALSE.'
1888	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
1889	ELSE
1890	dopr_index(i) = 115
1891	dopr_unit(i) = 'kg/m3'
1892	hom(:,2,115,:) = SPREAD( zu, 2, statistic_regions+1 )
1893	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1894	dopr_initial_index(i) = 121
1895	hom(:,2,121,:) = SPREAD( zu, 2, statistic_regions+1 )
1896	hom(nzb,2,121,:) = 0.0_wp ! because zu(nzb) is negative
1897	data_output_pr(i) = data_output_pr(i)(2:)
1898	ENDIF
1899	ENDIF
1900
1901	CASE ( 'qv', '#qv' )
1902	IF ( .NOT. bulk_cloud_model ) THEN
1903	dopr_index(i) = 41
1904	dopr_unit(i) = 'kg/kg'
1905	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
1906	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1907	dopr_initial_index(i) = 26
1908	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1909	hom(nzb,2,26,:) = 0.0_wp ! because zu(nzb) is negative
1910	data_output_pr(i) = data_output_pr(i)(2:)
1911	ENDIF
1912	ELSE
1913	dopr_index(i) = 42
1914	dopr_unit(i) = 'kg/kg'
1915	hom(:,2,42,:) = SPREAD( zu, 2, statistic_regions+1 )
1916	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1917	dopr_initial_index(i) = 27
1918	hom(:,2,27,:) = SPREAD( zu, 2, statistic_regions+1 )
1919	hom(nzb,2,27,:) = 0.0_wp ! because zu(nzb) is negative
1920	data_output_pr(i) = data_output_pr(i)(2:)
1921	ENDIF
1922	ENDIF
1923
1924	CASE ( 'thetal', '#thetal' )
1925	IF ( .NOT. bulk_cloud_model ) THEN
1926	message_string = 'data_output_pr = ' // &
1927	TRIM( data_output_pr(i) ) // ' is not imp' // &
1928	'lemented for bulk_cloud_model = .FALSE.'
1929	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
1930	ELSE
1931	dopr_index(i) = 4
1932	dopr_unit(i) = 'K'
1933	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
1934	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1935	dopr_initial_index(i) = 7
1936	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
1937	hom(nzb,2,7,:) = 0.0_wp ! because zu(nzb) is negative
1938	data_output_pr(i) = data_output_pr(i)(2:)
1939	ENDIF
1940	ENDIF
1941
1942	CASE ( 'thetav', '#thetav' )
1943	dopr_index(i) = 44
1944	dopr_unit(i) = 'K'
1945	hom(:,2,44,:) = SPREAD( zu, 2, statistic_regions+1 )
1946	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1947	dopr_initial_index(i) = 29
1948	hom(:,2,29,:) = SPREAD( zu, 2, statistic_regions+1 )
1949	hom(nzb,2,29,:) = 0.0_wp ! because zu(nzb) is negative
1950	data_output_pr(i) = data_output_pr(i)(2:)
1951	ENDIF
1952
1953	CASE ( 'w"thetav"' )
1954	dopr_index(i) = 45
1955	dopr_unit(i) = TRIM ( heatflux_output_unit )
1956	hom(:,2,45,:) = SPREAD( zw, 2, statistic_regions+1 )
1957
1958	CASE ( 'wthetav' )
1959	dopr_index(i) = 46
1960	dopr_unit(i) = TRIM ( heatflux_output_unit )
1961	hom(:,2,46,:) = SPREAD( zw, 2, statistic_regions+1 )
1962
1963	CASE ( 'wthetav' )
1964	dopr_index(i) = 47
1965	dopr_unit(i) = TRIM ( heatflux_output_unit )
1966	hom(:,2,47,:) = SPREAD( zw, 2, statistic_regions+1 )
1967
1968	CASE ( 'w"q"' )
1969	IF ( .NOT. humidity ) THEN
1970	message_string = 'data_output_pr = ' // &
1971	TRIM( data_output_pr(i) ) // ' is not imp' // &
1972	'lemented for humidity = .FALSE.'
1973	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
1974	ELSE
1975	dopr_index(i) = 48
1976	dopr_unit(i) = TRIM ( waterflux_output_unit )
1977	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
1978	ENDIF
1979
1980	CASE ( 'wq' )
1981	IF ( .NOT. humidity ) THEN
1982	message_string = 'data_output_pr = ' // &
1983	TRIM( data_output_pr(i) ) // ' is not imp' // &
1984	'lemented for humidity = .FALSE.'
1985	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
1986	ELSE
1987	dopr_index(i) = 49
1988	dopr_unit(i) = TRIM ( waterflux_output_unit )
1989	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
1990	ENDIF
1991
1992	CASE ( 'wq' )
1993	IF ( .NOT. humidity ) THEN
1994	message_string = 'data_output_pr = ' // &
1995	TRIM( data_output_pr(i) ) // ' is not imp' // &
1996	'lemented for humidity = .FALSE.'
1997	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
1998	ELSE
1999	dopr_index(i) = 50
2000	dopr_unit(i) = TRIM ( waterflux_output_unit )
2001	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2002	ENDIF
2003
2004	CASE ( 'w"s"' )
2005	IF ( .NOT. passive_scalar ) THEN
2006	message_string = 'data_output_pr = ' // &
2007	TRIM( data_output_pr(i) ) // ' is not imp' // &
2008	'lemented for passive_scalar = .FALSE.'
2009	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2010	ELSE
2011	dopr_index(i) = 117
2012	dopr_unit(i) = 'kg/m3 m/s'
2013	hom(:,2,117,:) = SPREAD( zw, 2, statistic_regions+1 )
2014	ENDIF
2015
2016	CASE ( 'ws' )
2017	IF ( .NOT. passive_scalar ) THEN
2018	message_string = 'data_output_pr = ' // &
2019	TRIM( data_output_pr(i) ) // ' is not imp' // &
2020	'lemented for passive_scalar = .FALSE.'
2021	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2022	ELSE
2023	dopr_index(i) = 114
2024	dopr_unit(i) = 'kg/m3 m/s'
2025	hom(:,2,114,:) = SPREAD( zw, 2, statistic_regions+1 )
2026	ENDIF
2027
2028	CASE ( 'ws' )
2029	IF ( .NOT. passive_scalar ) THEN
2030	message_string = 'data_output_pr = ' // &
2031	TRIM( data_output_pr(i) ) // ' is not imp' // &
2032	'lemented for passive_scalar = .FALSE.'
2033	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2034	ELSE
2035	dopr_index(i) = 118
2036	dopr_unit(i) = 'kg/m3 m/s'
2037	hom(:,2,118,:) = SPREAD( zw, 2, statistic_regions+1 )
2038	ENDIF
2039
2040	CASE ( 'w"qv"' )
2041	IF ( humidity .AND. .NOT. bulk_cloud_model ) THEN
2042	dopr_index(i) = 48
2043	dopr_unit(i) = TRIM ( waterflux_output_unit )
2044	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2045	ELSEIF ( humidity .AND. bulk_cloud_model ) THEN
2046	dopr_index(i) = 51
2047	dopr_unit(i) = TRIM ( waterflux_output_unit )
2048	hom(:,2,51,:) = SPREAD( zw, 2, statistic_regions+1 )
2049	ELSE
2050	message_string = 'data_output_pr = ' // &
2051	TRIM( data_output_pr(i) ) // ' is not imp' // &
2052	'lemented for bulk_cloud_model = .FALSE. ' // &
2053	'and humidity = .FALSE.'
2054	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2055	ENDIF
2056
2057	CASE ( 'wqv' )
2058	IF ( humidity .AND. .NOT. bulk_cloud_model ) THEN
2059	dopr_index(i) = 49
2060	dopr_unit(i) = TRIM ( waterflux_output_unit )
2061	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2062	ELSEIF( humidity .AND. bulk_cloud_model ) THEN
2063	dopr_index(i) = 52
2064	dopr_unit(i) = TRIM ( waterflux_output_unit )
2065	hom(:,2,52,:) = SPREAD( zw, 2, statistic_regions+1 )
2066	ELSE
2067	message_string = 'data_output_pr = ' // &
2068	TRIM( data_output_pr(i) ) // ' is not imp' // &
2069	'lemented for bulk_cloud_model = .FALSE. ' // &
2070	'and humidity = .FALSE.'
2071	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2072	ENDIF
2073
2074	CASE ( 'wqv' )
2075	IF ( humidity .AND. .NOT. bulk_cloud_model ) THEN
2076	dopr_index(i) = 50
2077	dopr_unit(i) = TRIM ( waterflux_output_unit )
2078	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2079	ELSEIF ( humidity .AND. bulk_cloud_model ) THEN
2080	dopr_index(i) = 53
2081	dopr_unit(i) = TRIM ( waterflux_output_unit )
2082	hom(:,2,53,:) = SPREAD( zw, 2, statistic_regions+1 )
2083	ELSE
2084	message_string = 'data_output_pr = ' // &
2085	TRIM( data_output_pr(i) ) // ' is not imp' // &
2086	'lemented for bulk_cloud_model = .FALSE. ' // &
2087	'and humidity = .FALSE.'
2088	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2089	ENDIF
2090
2091	CASE ( 'ql' )
2092	IF ( .NOT. bulk_cloud_model .AND. .NOT. cloud_droplets ) THEN
2093	message_string = 'data_output_pr = ' // &
2094	TRIM( data_output_pr(i) ) // ' is not imp' // &
2095	'lemented for bulk_cloud_model = .FALSE. ' // &
2096	'and cloud_droplets = .FALSE.'
2097	CALL message( 'check_parameters', 'PA0096', 1, 2, 0, 6, 0 )
2098	ELSE
2099	dopr_index(i) = 54
2100	dopr_unit(i) = 'kg/kg'
2101	hom(:,2,54,:) = SPREAD( zu, 2, statistic_regions+1 )
2102	ENDIF
2103
2104	CASE ( 'wuu*:dz' )
2105	dopr_index(i) = 55
2106	dopr_unit(i) = 'm2/s3'
2107	hom(:,2,55,:) = SPREAD( zu, 2, statistic_regions+1 )
2108
2109	CASE ( 'wp:dz' )
2110	dopr_index(i) = 56
2111	dopr_unit(i) = 'm2/s3'
2112	hom(:,2,56,:) = SPREAD( zw, 2, statistic_regions+1 )
2113
2114	CASE ( 'w"e:dz' )
2115	dopr_index(i) = 57
2116	dopr_unit(i) = 'm2/s3'
2117	hom(:,2,57,:) = SPREAD( zu, 2, statistic_regions+1 )
2118
2119	CASE ( 'u"theta"' )
2120	dopr_index(i) = 58
2121	dopr_unit(i) = TRIM ( heatflux_output_unit )
2122	hom(:,2,58,:) = SPREAD( zu, 2, statistic_regions+1 )
2123
2124	CASE ( 'utheta' )
2125	dopr_index(i) = 59
2126	dopr_unit(i) = TRIM ( heatflux_output_unit )
2127	hom(:,2,59,:) = SPREAD( zu, 2, statistic_regions+1 )
2128
2129	CASE ( 'utheta_t' )
2130	dopr_index(i) = 60
2131	dopr_unit(i) = TRIM ( heatflux_output_unit )
2132	hom(:,2,60,:) = SPREAD( zu, 2, statistic_regions+1 )
2133
2134	CASE ( 'v"theta"' )
2135	dopr_index(i) = 61
2136	dopr_unit(i) = TRIM ( heatflux_output_unit )
2137	hom(:,2,61,:) = SPREAD( zu, 2, statistic_regions+1 )
2138
2139	CASE ( 'vtheta' )
2140	dopr_index(i) = 62
2141	dopr_unit(i) = TRIM ( heatflux_output_unit )
2142	hom(:,2,62,:) = SPREAD( zu, 2, statistic_regions+1 )
2143
2144	CASE ( 'vtheta_t' )
2145	dopr_index(i) = 63
2146	dopr_unit(i) = TRIM ( heatflux_output_unit )
2147	hom(:,2,63,:) = SPREAD( zu, 2, statistic_regions+1 )
2148
2149	CASE ( 'wp' )
2150	dopr_index(i) = 68
2151	dopr_unit(i) = 'm3/s3'
2152	hom(:,2,68,:) = SPREAD( zu, 2, statistic_regions+1 )
2153
2154	CASE ( 'w"e' )
2155	dopr_index(i) = 69
2156	dopr_unit(i) = 'm3/s3'
2157	hom(:,2,69,:) = SPREAD( zu, 2, statistic_regions+1 )
2158
2159	CASE ( 'q*2' )
2160	IF ( .NOT. humidity ) THEN
2161	message_string = 'data_output_pr = ' // &
2162	TRIM( data_output_pr(i) ) // ' is not imp' // &
2163	'lemented for humidity = .FALSE.'
2164	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2165	ELSE
2166	dopr_index(i) = 70
2167	dopr_unit(i) = 'kg2/kg2'
2168	hom(:,2,70,:) = SPREAD( zu, 2, statistic_regions+1 )
2169	ENDIF
2170
2171	CASE ( 'hyp' )
2172	dopr_index(i) = 72
2173	dopr_unit(i) = 'hPa'
2174	hom(:,2,72,:) = SPREAD( zu, 2, statistic_regions+1 )
2175
2176	CASE ( 'rho' )
2177	dopr_index(i) = 119
2178	dopr_unit(i) = 'kg/m3'
2179	hom(:,2,119,:) = SPREAD( zu, 2, statistic_regions+1 )
2180
2181	CASE ( 'rho_zw' )
2182	dopr_index(i) = 120
2183	dopr_unit(i) = 'kg/m3'
2184	hom(:,2,120,:) = SPREAD( zw, 2, statistic_regions+1 )
2185
2186	CASE ( 'ug' )
2187	dopr_index(i) = 78
2188	dopr_unit(i) = 'm/s'
2189	hom(:,2,78,:) = SPREAD( zu, 2, statistic_regions+1 )
2190
2191	CASE ( 'vg' )
2192	dopr_index(i) = 79
2193	dopr_unit(i) = 'm/s'
2194	hom(:,2,79,:) = SPREAD( zu, 2, statistic_regions+1 )
2195
2196	CASE ( 'w_subs' )
2197	IF ( .NOT. large_scale_subsidence ) THEN
2198	message_string = 'data_output_pr = ' // &
2199	TRIM( data_output_pr(i) ) // ' is not imp' // &
2200	'lemented for large_scale_subsidence = .FALSE.'
2201	CALL message( 'check_parameters', 'PA0382', 1, 2, 0, 6, 0 )
2202	ELSE
2203	dopr_index(i) = 80
2204	dopr_unit(i) = 'm/s'
2205	hom(:,2,80,:) = SPREAD( zu, 2, statistic_regions+1 )
2206	ENDIF
2207
2208	CASE ( 's*2' )
2209	IF ( .NOT. passive_scalar ) THEN
2210	message_string = 'data_output_pr = ' // &
2211	TRIM( data_output_pr(i) ) // ' is not imp' // &
2212	'lemented for passive_scalar = .FALSE.'
2213	CALL message( 'check_parameters', 'PA0185', 1, 2, 0, 6, 0 )
2214	ELSE
2215	dopr_index(i) = 116
2216	dopr_unit(i) = 'kg2/m6'
2217	hom(:,2,116,:) = SPREAD( zu, 2, statistic_regions+1 )
2218	ENDIF
2219
2220	CASE DEFAULT
2221	unit = 'illegal'
2222	!
2223	!-- Check for other modules
2224	CALL module_interface_check_data_output_pr( data_output_pr(i), i, &
2225	unit, dopr_unit(i) )
2226
2227	!
2228	!-- No valid quantity found
2229	IF ( unit == 'illegal' ) THEN
2230	IF ( data_output_pr_user(1) /= ' ' ) THEN
2231	message_string = 'illegal value for data_output_pr or ' // &
2232	'data_output_pr_user = "' // &
2233	TRIM( data_output_pr(i) ) // '"'
2234	CALL message( 'check_parameters', 'PA0097', 1, 2, 0, 6, 0 )
2235	ELSE
2236	message_string = 'illegal value for data_output_pr = "' // &
2237	TRIM( data_output_pr(i) ) // '"'
2238	CALL message( 'check_parameters', 'PA0098', 1, 2, 0, 6, 0 )
2239	ENDIF
2240	ENDIF
2241
2242	END SELECT
2243
2244	ENDDO
2245
2246
2247	!
2248	!-- Append user-defined data output variables to the standard data output
2249	IF ( data_output_user(1) /= ' ' ) THEN
2250	i = 1
2251	DO WHILE ( data_output(i) /= ' ' .AND. i <= 500 )
2252	i = i + 1
2253	ENDDO
2254	j = 1
2255	DO WHILE ( data_output_user(j) /= ' ' .AND. j <= 500 )
2256	IF ( i > 500 ) THEN
2257	message_string = 'number of output quantitities given by data' // &
2258	'_output and data_output_user exceeds the limit of 500'
2259	CALL message( 'check_parameters', 'PA0102', 1, 2, 0, 6, 0 )
2260	ENDIF
2261	data_output(i) = data_output_user(j)
2262	i = i + 1
2263	j = j + 1
2264	ENDDO
2265	ENDIF
2266
2267	!
2268	!-- Check and set steering parameters for 2d/3d data output and averaging
2269	i = 1
2270	DO WHILE ( data_output(i) /= ' ' .AND. i <= 500 )
2271	!
2272	!-- Check for data averaging
2273	ilen = LEN_TRIM( data_output(i) )
2274	j = 0 ! no data averaging
2275	IF ( ilen > 3 ) THEN
2276	IF ( data_output(i)(ilen-2:ilen) == '_av' ) THEN
2277	j = 1 ! data averaging
2278	data_output(i) = data_output(i)(1:ilen-3)
2279	ENDIF
2280	ENDIF
2281	!
2282	!-- Check for cross section or volume data
2283	ilen = LEN_TRIM( data_output(i) )
2284	k = 0 ! 3d data
2285	var = data_output(i)(1:ilen)
2286	IF ( ilen > 3 ) THEN
2287	IF ( data_output(i)(ilen-2:ilen) == '_xy' .OR. &
2288	data_output(i)(ilen-2:ilen) == '_xz' .OR. &
2289	data_output(i)(ilen-2:ilen) == '_yz' ) THEN
2290	k = 1 ! 2d data
2291	var = data_output(i)(1:ilen-3)
2292	ENDIF
2293	ENDIF
2294
2295	!
2296	!-- Check for allowed value and set units
2297	SELECT CASE ( TRIM( var ) )
2298
2299	CASE ( 'e' )
2300	IF ( constant_diffusion ) THEN
2301	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2302	'res constant_diffusion = .FALSE.'
2303	CALL message( 'check_parameters', 'PA0103', 1, 2, 0, 6, 0 )
2304	ENDIF
2305	unit = 'm2/s2'
2306
2307	CASE ( 'thetal' )
2308	IF ( .NOT. bulk_cloud_model ) THEN
2309	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2310	'res bulk_cloud_model = .TRUE.'
2311	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2312	ENDIF
2313	unit = 'K'
2314
2315	CASE ( 'pc', 'pr' )
2316	IF ( .NOT. particle_advection ) THEN
2317	message_string = 'output of "' // TRIM( var ) // '" requir' // &
2318	'es a "particle_parameters"-NAMELIST in the parameter ' // &
2319	'file (PARIN)'
2320	CALL message( 'check_parameters', 'PA0104', 1, 2, 0, 6, 0 )
2321	ENDIF
2322	IF ( TRIM( var ) == 'pc' ) unit = 'number'
2323	IF ( TRIM( var ) == 'pr' ) unit = 'm'
2324
2325	CASE ( 'q', 'thetav' )
2326	IF ( .NOT. humidity ) THEN
2327	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2328	'res humidity = .TRUE.'
2329	CALL message( 'check_parameters', 'PA0105', 1, 2, 0, 6, 0 )
2330	ENDIF
2331	IF ( TRIM( var ) == 'q' ) unit = 'kg/kg'
2332	IF ( TRIM( var ) == 'thetav' ) unit = 'K'
2333
2334	CASE ( 'ql' )
2335	IF ( .NOT. ( bulk_cloud_model .OR. cloud_droplets ) ) THEN
2336	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2337	'res bulk_cloud_model = .TRUE. or cloud_droplets = .TRUE.'
2338	CALL message( 'check_parameters', 'PA0106', 1, 2, 0, 6, 0 )
2339	ENDIF
2340	unit = 'kg/kg'
2341
2342	CASE ( 'ql_c', 'ql_v', 'ql_vp' )
2343	IF ( .NOT. cloud_droplets ) THEN
2344	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2345	'res cloud_droplets = .TRUE.'
2346	CALL message( 'check_parameters', 'PA0107', 1, 2, 0, 6, 0 )
2347	ENDIF
2348	IF ( TRIM( var ) == 'ql_c' ) unit = 'kg/kg'
2349	IF ( TRIM( var ) == 'ql_v' ) unit = 'm3'
2350	IF ( TRIM( var ) == 'ql_vp' ) unit = 'none'
2351
2352	CASE ( 'qv' )
2353	IF ( .NOT. bulk_cloud_model ) THEN
2354	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2355	'res bulk_cloud_model = .TRUE.'
2356	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2357	ENDIF
2358	unit = 'kg/kg'
2359
2360	CASE ( 's' )
2361	IF ( .NOT. passive_scalar ) THEN
2362	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2363	'res passive_scalar = .TRUE.'
2364	CALL message( 'check_parameters', 'PA0110', 1, 2, 0, 6, 0 )
2365	ENDIF
2366	unit = 'kg/m3'
2367
2368	CASE ( 'p', 'theta', 'u', 'v', 'w' )
2369	IF ( TRIM( var ) == 'p' ) unit = 'Pa'
2370	IF ( TRIM( var ) == 'theta' ) unit = 'K'
2371	IF ( TRIM( var ) == 'u' ) unit = 'm/s'
2372	IF ( TRIM( var ) == 'v' ) unit = 'm/s'
2373	IF ( TRIM( var ) == 'w' ) unit = 'm/s'
2374	CONTINUE
2375
2376	CASE ( 'ghf', 'lwp', 'ol', 'qsws', 'r_a*', &
2377	'shf', 'ssws', 't', 'theta_2m', 'tsurf', 'us', &
2378	'z0', 'z0h', 'z0q*' )
2379	IF ( k == 0 .OR. data_output(i)(ilen-2:ilen) /= '_xy' ) THEN
2380	message_string = 'illegal value for data_output: "' // &
2381	TRIM( var ) // '" & only 2d-horizontal ' // &
2382	'cross sections are allowed for this value'
2383	CALL message( 'check_parameters', 'PA0111', 1, 2, 0, 6, 0 )
2384	ENDIF
2385
2386	IF ( TRIM( var ) == 'lwp*' .AND. .NOT. bulk_cloud_model ) THEN
2387	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2388	'res bulk_cloud_model = .TRUE.'
2389	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2390	ENDIF
2391	IF ( TRIM( var ) == 'qsws*' .AND. .NOT. humidity ) THEN
2392	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2393	'res humidity = .TRUE.'
2394	CALL message( 'check_parameters', 'PA0322', 1, 2, 0, 6, 0 )
2395	ENDIF
2396
2397	IF ( TRIM( var ) == 'ghf*' .AND. .NOT. land_surface ) THEN
2398	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2399	'res land_surface = .TRUE.'
2400	CALL message( 'check_parameters', 'PA0404', 1, 2, 0, 6, 0 )
2401	ENDIF
2402
2403	IF ( ( TRIM( var ) == 'r_a' .OR. TRIM( var ) == 'ghf' ) &
2404	.AND. .NOT. land_surface .AND. .NOT. urban_surface ) &
2405	THEN
2406	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2407	'res land_surface = .TRUE. or ' // &
2408	'urban_surface = .TRUE.'
2409	CALL message( 'check_parameters', 'PA0404', 1, 2, 0, 6, 0 )
2410	ENDIF
2411
2412	IF ( TRIM( var ) == 'ssws*' .AND. .NOT. passive_scalar ) THEN
2413	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2414	'res passive_scalar = .TRUE.'
2415	CALL message( 'check_parameters', 'PA0361', 1, 2, 0, 6, 0 )
2416	ENDIF
2417	!
2418	!-- Activate calculation of 2m temperature if output is requested
2419	IF ( TRIM( var ) == 'theta_2m*' ) THEN
2420	do_output_at_2m = .TRUE.
2421	unit = 'K'
2422	ENDIF
2423
2424	IF ( TRIM( var ) == 'ghf*' ) unit = 'W/m2'
2425	IF ( TRIM( var ) == 'lwp*' ) unit = 'kg/m2'
2426	IF ( TRIM( var ) == 'ol*' ) unit = 'm'
2427	IF ( TRIM( var ) == 'qsws*' ) unit = 'kgm/kgs'
2428	IF ( TRIM( var ) == 'r_a*' ) unit = 's/m'
2429	IF ( TRIM( var ) == 'shf' ) unit = 'Km/s'
2430	IF ( TRIM( var ) == 'ssws' ) unit = 'kg/m2s'
2431	IF ( TRIM( var ) == 't*' ) unit = 'K'
2432	IF ( TRIM( var ) == 'tsurf*' ) unit = 'K'
2433	IF ( TRIM( var ) == 'us*' ) unit = 'm/s'
2434	IF ( TRIM( var ) == 'z0*' ) unit = 'm'
2435	IF ( TRIM( var ) == 'z0h*' ) unit = 'm'
2436	!
2437	!-- Output of surface latent and sensible heat flux will be in W/m2
2438	!-- in case of natural- and urban-type surfaces, even if
2439	!-- flux_output_mode is set to kinematic units.
2440	IF ( land_surface .OR. urban_surface ) THEN
2441	IF ( TRIM( var ) == 'shf*' ) unit = 'W/m2'
2442	IF ( TRIM( var ) == 'qsws*' ) unit = 'W/m2'
2443	ENDIF
2444
2445	CASE DEFAULT
2446	!
2447	!-- Check for other modules
2448	CALL module_interface_check_data_output( var, unit, i, j, ilen, k )
2449
2450	IF ( unit == 'illegal' ) THEN
2451	IF ( data_output_user(1) /= ' ' ) THEN
2452	message_string = 'illegal value for data_output or ' // &
2453	'data_output_user = "' // TRIM( data_output(i) ) // '"'
2454	CALL message( 'check_parameters', 'PA0114', 1, 2, 0, 6, 0 )
2455	ELSE
2456	message_string = 'illegal value for data_output = "' // &
2457	TRIM( data_output(i) ) // '"'
2458	CALL message( 'check_parameters', 'PA0115', 1, 2, 0, 6, 0 )
2459	ENDIF
2460	ENDIF
2461
2462	END SELECT
2463	!
2464	!-- Set the internal steering parameters appropriately
2465	IF ( k == 0 ) THEN
2466	do3d_no(j) = do3d_no(j) + 1
2467	do3d(j,do3d_no(j)) = data_output(i)
2468	do3d_unit(j,do3d_no(j)) = unit
2469	ELSE
2470	do2d_no(j) = do2d_no(j) + 1
2471	do2d(j,do2d_no(j)) = data_output(i)
2472	do2d_unit(j,do2d_no(j)) = unit
2473	IF ( data_output(i)(ilen-2:ilen) == '_xy' ) THEN
2474	data_output_xy(j) = .TRUE.
2475	ENDIF
2476	IF ( data_output(i)(ilen-2:ilen) == '_xz' ) THEN
2477	data_output_xz(j) = .TRUE.
2478	ENDIF
2479	IF ( data_output(i)(ilen-2:ilen) == '_yz' ) THEN
2480	data_output_yz(j) = .TRUE.
2481	ENDIF
2482	ENDIF
2483
2484	IF ( j == 1 ) THEN
2485	!
2486	!-- Check, if variable is already subject to averaging
2487	found = .FALSE.
2488	DO k = 1, doav_n
2489	IF ( TRIM( doav(k) ) == TRIM( var ) ) found = .TRUE.
2490	ENDDO
2491
2492	IF ( .NOT. found ) THEN
2493	doav_n = doav_n + 1
2494	doav(doav_n) = var
2495	ENDIF
2496	ENDIF
2497
2498	i = i + 1
2499	ENDDO
2500
2501	!
2502	!-- Averaged 2d or 3d output requires that an averaging interval has been set
2503	IF ( doav_n > 0 .AND. averaging_interval == 0.0_wp ) THEN
2504	WRITE( message_string, * ) 'output of averaged quantity "', &
2505	TRIM( doav(1) ), '_av" requires to set a ', &
2506	'non-zero averaging interval'
2507	CALL message( 'check_parameters', 'PA0323', 1, 2, 0, 6, 0 )
2508	ENDIF
2509
2510	!
2511	!-- Check sectional planes and store them in one shared array
2512	IF ( ANY( section_xy > nz + 1 ) ) THEN
2513	WRITE( message_string, * ) 'section_xy must be <= nz + 1 = ', nz + 1
2514	CALL message( 'check_parameters', 'PA0319', 1, 2, 0, 6, 0 )
2515	ENDIF
2516	IF ( ANY( section_xz > ny + 1 ) ) THEN
2517	WRITE( message_string, * ) 'section_xz must be <= ny + 1 = ', ny + 1
2518	CALL message( 'check_parameters', 'PA0320', 1, 2, 0, 6, 0 )
2519	ENDIF
2520	IF ( ANY( section_yz > nx + 1 ) ) THEN
2521	WRITE( message_string, * ) 'section_yz must be <= nx + 1 = ', nx + 1
2522	CALL message( 'check_parameters', 'PA0321', 1, 2, 0, 6, 0 )
2523	ENDIF
2524	section(:,1) = section_xy
2525	section(:,2) = section_xz
2526	section(:,3) = section_yz
2527
2528	!
2529	!-- Upper plot limit for 3D arrays
2530	IF ( nz_do3d == -9999 ) nz_do3d = nzt + 1
2531
2532	!
2533	!-- Set output format string (used in header)
2534	SELECT CASE ( netcdf_data_format )
2535	CASE ( 1 )
2536	netcdf_data_format_string = 'netCDF classic'
2537	CASE ( 2 )
2538	netcdf_data_format_string = 'netCDF 64bit offset'
2539	CASE ( 3 )
2540	netcdf_data_format_string = 'netCDF4/HDF5'
2541	CASE ( 4 )
2542	netcdf_data_format_string = 'netCDF4/HDF5 classic'
2543	CASE ( 5 )
2544	netcdf_data_format_string = 'parallel netCDF4/HDF5'
2545	CASE ( 6 )
2546	netcdf_data_format_string = 'parallel netCDF4/HDF5 classic'
2547
2548	END SELECT
2549
2550	!
2551	!-- Check mask conditions
2552	DO mid = 1, max_masks
2553	IF ( data_output_masks(mid,1) /= ' ' .OR. &
2554	data_output_masks_user(mid,1) /= ' ' ) THEN
2555	masks = masks + 1
2556	ENDIF
2557	ENDDO
2558
2559	IF ( masks < 0 .OR. masks > max_masks ) THEN
2560	WRITE( message_string, * ) 'illegal value: masks must be >= 0 and ', &
2561	'<= ', max_masks, ' (=max_masks)'
2562	CALL message( 'check_parameters', 'PA0325', 1, 2, 0, 6, 0 )
2563	ENDIF
2564	IF ( masks > 0 ) THEN
2565	mask_scale(1) = mask_scale_x
2566	mask_scale(2) = mask_scale_y
2567	mask_scale(3) = mask_scale_z
2568	IF ( ANY( mask_scale <= 0.0_wp ) ) THEN
2569	WRITE( message_string, * ) &
2570	'illegal value: mask_scale_x, mask_scale_y and mask_scale_z', &
2571	'must be > 0.0'
2572	CALL message( 'check_parameters', 'PA0326', 1, 2, 0, 6, 0 )
2573	ENDIF
2574	!
2575	!-- Generate masks for masked data output
2576	!-- Parallel netcdf output is not tested so far for masked data, hence
2577	!-- netcdf_data_format is switched back to non-parallel output.
2578	netcdf_data_format_save = netcdf_data_format
2579	IF ( netcdf_data_format > 4 ) THEN
2580	IF ( netcdf_data_format == 5 ) netcdf_data_format = 3
2581	IF ( netcdf_data_format == 6 ) netcdf_data_format = 4
2582	message_string = 'netCDF file formats '// &
2583	'5 (parallel netCDF 4) and ' // &
2584	'6 (parallel netCDF 4 Classic model) '// &
2585	'& are currently not supported (not yet tested) ' //&
2586	'for masked data. &Using respective non-parallel' //&
2587	' output for masked data.'
2588	CALL message( 'check_parameters', 'PA0383', 0, 0, 0, 6, 0 )
2589	ENDIF
2590	CALL init_masks
2591	netcdf_data_format = netcdf_data_format_save
2592	ENDIF
2593
2594	!
2595	!-- Check the NetCDF data format
2596	IF ( netcdf_data_format > 2 ) THEN
2597	#if defined( __netcdf4 )
2598	CONTINUE
2599	#else
2600	message_string = 'netCDF: netCDF4 format requested but no ' // &
2601	'cpp-directive __netcdf4 given & switch ' // &
2602	'back to 64-bit offset format'
2603	CALL message( 'check_parameters', 'PA0171', 0, 1, 0, 6, 0 )
2604	netcdf_data_format = 2
2605	#endif
2606	ENDIF
2607	IF ( netcdf_data_format > 4 ) THEN
2608	#if defined( __netcdf4 ) && defined( __netcdf4_parallel )
2609	CONTINUE
2610	#else
2611	message_string = 'netCDF: netCDF4 parallel output requested but no ' // &
2612	'cpp-directive __netcdf4_parallel given & switch ' //&
2613	'back to netCDF4 non-parallel output'
2614	CALL message( 'check_parameters', 'PA0099', 0, 1, 0, 6, 0 )
2615	netcdf_data_format = netcdf_data_format - 2
2616	#endif
2617	ENDIF
2618
2619	!
2620	!-- Calculate fixed number of output time levels for parallel netcdf output.
2621	!-- The time dimension has to be defined as limited for parallel output,
2622	!-- because otherwise the I/O performance drops significantly.
2623	IF ( netcdf_data_format > 4 ) THEN
2624
2625	!
2626	!-- Check if any of the follwoing data output interval is 0.0s, which is
2627	!-- not allowed for parallel output.
2628	CALL check_dt_do( dt_do3d, 'dt_do3d' )
2629	CALL check_dt_do( dt_do2d_xy, 'dt_do2d_xy' )
2630	CALL check_dt_do( dt_do2d_xz, 'dt_do2d_xz' )
2631	CALL check_dt_do( dt_do2d_yz, 'dt_do2d_yz' )
2632	CALL check_dt_do( dt_data_output_av, 'dt_data_output_av' )
2633
2634	!-- Set needed time levels (ntdim) to
2635	!-- saved time levels + to be saved time levels.
2636	ntdim_3d(0) = do3d_time_count(0) + CEILING( &
2637	( end_time - MAX( &
2638	MERGE(skip_time_do3d, skip_time_do3d + spinup_time, &
2639	data_output_during_spinup ), &
2640	simulated_time_at_begin ) &
2641	) / dt_do3d )
2642	IF ( do3d_at_begin ) ntdim_3d(0) = ntdim_3d(0) + 1
2643
2644	ntdim_3d(1) = do3d_time_count(1) + CEILING( &
2645	( end_time - MAX( &
2646	MERGE( skip_time_data_output_av, skip_time_data_output_av &
2647	+ spinup_time, data_output_during_spinup ), &
2648	simulated_time_at_begin ) &
2649	) / dt_data_output_av )
2650
2651	ntdim_2d_xy(0) = do2d_xy_time_count(0) + CEILING( &
2652	( end_time - MAX( &
2653	MERGE(skip_time_do2d_xy, skip_time_do2d_xy + spinup_time, &
2654	data_output_during_spinup ), &
2655	simulated_time_at_begin ) &
2656	) / dt_do2d_xy )
2657
2658	ntdim_2d_xz(0) = do2d_xz_time_count(0) + CEILING( &
2659	( end_time - MAX( &
2660	MERGE(skip_time_do2d_xz, skip_time_do2d_xz + spinup_time, &
2661	data_output_during_spinup ), &
2662	simulated_time_at_begin ) &
2663	) / dt_do2d_xz )
2664
2665	ntdim_2d_yz(0) = do2d_yz_time_count(0) + CEILING( &
2666	( end_time - MAX( &
2667	MERGE(skip_time_do2d_yz, skip_time_do2d_yz + spinup_time, &
2668	data_output_during_spinup ), &
2669	simulated_time_at_begin ) &
2670	) / dt_do2d_yz )
2671
2672	IF ( do2d_at_begin ) THEN
2673	ntdim_2d_xy(0) = ntdim_2d_xy(0) + 1
2674	ntdim_2d_xz(0) = ntdim_2d_xz(0) + 1
2675	ntdim_2d_yz(0) = ntdim_2d_yz(0) + 1
2676	ENDIF
2677	!
2678	!-- Please note, for averaged 2D data skip_time_data_output_av is the relavant
2679	!-- output control parameter.
2680	ntdim_2d_xy(1) = do2d_xy_time_count(1) + CEILING( &
2681	( end_time - MAX( MERGE( skip_time_data_output_av, &
2682	skip_time_data_output_av + spinup_time, &
2683	data_output_during_spinup ), &
2684	simulated_time_at_begin ) &
2685	) / dt_data_output_av )
2686
2687	ntdim_2d_xz(1) = do2d_xz_time_count(1) + CEILING( &
2688	( end_time - MAX( MERGE( skip_time_data_output_av, &
2689	skip_time_data_output_av + spinup_time, &
2690	data_output_during_spinup ), &
2691	simulated_time_at_begin ) &
2692	) / dt_data_output_av )
2693
2694	ntdim_2d_yz(1) = do2d_yz_time_count(1) + CEILING( &
2695	( end_time - MAX( MERGE( skip_time_data_output_av, &
2696	skip_time_data_output_av + spinup_time, &
2697	data_output_during_spinup ), &
2698	simulated_time_at_begin ) &
2699	) / dt_data_output_av )
2700
2701	ENDIF
2702
2703	!
2704	!-- Check, whether a constant diffusion coefficient shall be used
2705	IF ( km_constant /= -1.0_wp ) THEN
2706	IF ( km_constant < 0.0_wp ) THEN
2707	WRITE( message_string, * ) 'km_constant = ', km_constant, ' < 0.0'
2708	CALL message( 'check_parameters', 'PA0121', 1, 2, 0, 6, 0 )
2709	ELSE
2710	IF ( prandtl_number < 0.0_wp ) THEN
2711	WRITE( message_string, * ) 'prandtl_number = ', prandtl_number, &
2712	' < 0.0'
2713	CALL message( 'check_parameters', 'PA0122', 1, 2, 0, 6, 0 )
2714	ENDIF
2715	constant_diffusion = .TRUE.
2716
2717	IF ( constant_flux_layer ) THEN
2718	message_string = 'constant_flux_layer is not allowed with fixed ' &
2719	// 'value of km'
2720	CALL message( 'check_parameters', 'PA0123', 1, 2, 0, 6, 0 )
2721	ENDIF
2722	ENDIF
2723	ENDIF
2724
2725	!
2726	!-- In case of non-cyclic lateral boundaries and a damping layer for the
2727	!-- potential temperature, check the width of the damping layer
2728	IF ( bc_lr /= 'cyclic' ) THEN
2729	IF ( pt_damping_width < 0.0_wp .OR. &
2730	pt_damping_width > REAL( (nx+1) * dx ) ) THEN
2731	message_string = 'pt_damping_width out of range'
2732	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
2733	ENDIF
2734	ENDIF
2735
2736	IF ( bc_ns /= 'cyclic' ) THEN
2737	IF ( pt_damping_width < 0.0_wp .OR. &
2738	pt_damping_width > REAL( (ny+1) * dy ) ) THEN
2739	message_string = 'pt_damping_width out of range'
2740	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
2741	ENDIF
2742	ENDIF
2743
2744	!
2745	!-- Check value range for zeta = z/L
2746	IF ( zeta_min >= zeta_max ) THEN
2747	WRITE( message_string, * ) 'zeta_min = ', zeta_min, ' must be less ', &
2748	'than zeta_max = ', zeta_max
2749	CALL message( 'check_parameters', 'PA0125', 1, 2, 0, 6, 0 )
2750	ENDIF
2751
2752	!
2753	!-- Check random generator
2754	IF ( (random_generator /= 'system-specific' .AND. &
2755	random_generator /= 'random-parallel' ) .AND. &
2756	random_generator /= 'numerical-recipes' ) THEN
2757	message_string = 'unknown random generator: random_generator = "' // &
2758	TRIM( random_generator ) // '"'
2759	CALL message( 'check_parameters', 'PA0135', 1, 2, 0, 6, 0 )
2760	ENDIF
2761
2762	!
2763	!-- Determine upper and lower hight level indices for random perturbations
2764	IF ( disturbance_level_b == -9999999.9_wp ) THEN
2765	IF ( ocean_mode ) THEN
2766	disturbance_level_b = zu((nzt*2)/3)
2767	disturbance_level_ind_b = ( nzt * 2 ) / 3
2768	ELSE
2769	disturbance_level_b = zu(nzb+3)
2770	disturbance_level_ind_b = nzb + 3
2771	ENDIF
2772	ELSEIF ( disturbance_level_b < zu(3) ) THEN
2773	WRITE( message_string, * ) 'disturbance_level_b = ', &
2774	disturbance_level_b, ' must be >= ', zu(3), '(zu(3))'
2775	CALL message( 'check_parameters', 'PA0126', 1, 2, 0, 6, 0 )
2776	ELSEIF ( disturbance_level_b > zu(nzt-2) ) THEN
2777	WRITE( message_string, * ) 'disturbance_level_b = ', &
2778	disturbance_level_b, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
2779	CALL message( 'check_parameters', 'PA0127', 1, 2, 0, 6, 0 )
2780	ELSE
2781	DO k = 3, nzt-2
2782	IF ( disturbance_level_b <= zu(k) ) THEN
2783	disturbance_level_ind_b = k
2784	EXIT
2785	ENDIF
2786	ENDDO
2787	ENDIF
2788
2789	IF ( disturbance_level_t == -9999999.9_wp ) THEN
2790	IF ( ocean_mode ) THEN
2791	disturbance_level_t = zu(nzt-3)
2792	disturbance_level_ind_t = nzt - 3
2793	ELSE
2794	disturbance_level_t = zu(nzt/3)
2795	disturbance_level_ind_t = nzt / 3
2796	ENDIF
2797	ELSEIF ( disturbance_level_t > zu(nzt-2) ) THEN
2798	WRITE( message_string, * ) 'disturbance_level_t = ', &
2799	disturbance_level_t, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
2800	CALL message( 'check_parameters', 'PA0128', 1, 2, 0, 6, 0 )
2801	ELSEIF ( disturbance_level_t < disturbance_level_b ) THEN
2802	WRITE( message_string, * ) 'disturbance_level_t = ', &
2803	disturbance_level_t, ' must be >= disturbance_level_b = ', &
2804	disturbance_level_b
2805	CALL message( 'check_parameters', 'PA0129', 1, 2, 0, 6, 0 )
2806	ELSE
2807	DO k = 3, nzt-2
2808	IF ( disturbance_level_t <= zu(k) ) THEN
2809	disturbance_level_ind_t = k
2810	EXIT
2811	ENDIF
2812	ENDDO
2813	ENDIF
2814
2815	!
2816	!-- Check again whether the levels determined this way are ok.
2817	!-- Error may occur at automatic determination and too few grid points in
2818	!-- z-direction.
2819	IF ( disturbance_level_ind_t < disturbance_level_ind_b ) THEN
2820	WRITE( message_string, * ) 'disturbance_level_ind_t = ', &
2821	disturbance_level_ind_t, ' must be >= ', &
2822	'disturbance_level_ind_b = ', disturbance_level_ind_b
2823	CALL message( 'check_parameters', 'PA0130', 1, 2, 0, 6, 0 )
2824	ENDIF
2825
2826	!
2827	!-- Determine the horizontal index range for random perturbations.
2828	!-- In case of non-cyclic horizontal boundaries, no perturbations are imposed
2829	!-- near the inflow and the perturbation area is further limited to ...(1)
2830	!-- after the initial phase of the flow.
2831
2832	IF ( bc_lr /= 'cyclic' ) THEN
2833	IF ( inflow_disturbance_begin == -1 ) THEN
2834	inflow_disturbance_begin = MIN( 10, nx/2 )
2835	ENDIF
2836	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > nx )&
2837	THEN
2838	message_string = 'inflow_disturbance_begin out of range'
2839	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
2840	ENDIF
2841	IF ( inflow_disturbance_end == -1 ) THEN
2842	inflow_disturbance_end = MIN( 100, 3*nx/4 )
2843	ENDIF
2844	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > nx ) &
2845	THEN
2846	message_string = 'inflow_disturbance_end out of range'
2847	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
2848	ENDIF
2849	ELSEIF ( bc_ns /= 'cyclic' ) THEN
2850	IF ( inflow_disturbance_begin == -1 ) THEN
2851	inflow_disturbance_begin = MIN( 10, ny/2 )
2852	ENDIF
2853	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > ny )&
2854	THEN
2855	message_string = 'inflow_disturbance_begin out of range'
2856	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
2857	ENDIF
2858	IF ( inflow_disturbance_end == -1 ) THEN
2859	inflow_disturbance_end = MIN( 100, 3*ny/4 )
2860	ENDIF
2861	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > ny ) &
2862	THEN
2863	message_string = 'inflow_disturbance_end out of range'
2864	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
2865	ENDIF
2866	ENDIF
2867
2868	IF ( random_generator == 'random-parallel' ) THEN
2869	dist_nxl = nxl; dist_nxr = nxr
2870	dist_nys = nys; dist_nyn = nyn
2871	IF ( bc_lr == 'radiation/dirichlet' ) THEN
2872	dist_nxr = MIN( nx - inflow_disturbance_begin, nxr )
2873	dist_nxl(1) = MAX( nx - inflow_disturbance_end, nxl )
2874	ELSEIF ( bc_lr == 'dirichlet/radiation' ) THEN
2875	dist_nxl = MAX( inflow_disturbance_begin, nxl )
2876	dist_nxr(1) = MIN( inflow_disturbance_end, nxr )
2877	ELSEIF ( bc_lr == 'nested' .OR. bc_lr == 'nesting_offline' ) THEN
2878	dist_nxl = MAX( inflow_disturbance_begin, nxl )
2879	dist_nxr = MIN( nx - inflow_disturbance_begin, nxr )
2880	ENDIF
2881	IF ( bc_ns == 'dirichlet/radiation' ) THEN
2882	dist_nyn = MIN( ny - inflow_disturbance_begin, nyn )
2883	dist_nys(1) = MAX( ny - inflow_disturbance_end, nys )
2884	ELSEIF ( bc_ns == 'radiation/dirichlet' ) THEN
2885	dist_nys = MAX( inflow_disturbance_begin, nys )
2886	dist_nyn(1) = MIN( inflow_disturbance_end, nyn )
2887	ELSEIF ( bc_ns == 'nested' .OR. bc_ns == 'nesting_offline' ) THEN
2888	dist_nys = MAX( inflow_disturbance_begin, nys )
2889	dist_nyn = MIN( ny - inflow_disturbance_begin, nyn )
2890	ENDIF
2891	ELSE
2892	dist_nxl = 0; dist_nxr = nx
2893	dist_nys = 0; dist_nyn = ny
2894	IF ( bc_lr == 'radiation/dirichlet' ) THEN
2895	dist_nxr = nx - inflow_disturbance_begin
2896	dist_nxl(1) = nx - inflow_disturbance_end
2897	ELSEIF ( bc_lr == 'dirichlet/radiation' ) THEN
2898	dist_nxl = inflow_disturbance_begin
2899	dist_nxr(1) = inflow_disturbance_end
2900	ELSEIF ( bc_lr == 'nested' .OR. bc_lr == 'nesting_offline' ) THEN
2901	dist_nxr = nx - inflow_disturbance_begin
2902	dist_nxl = inflow_disturbance_begin
2903	ENDIF
2904	IF ( bc_ns == 'dirichlet/radiation' ) THEN
2905	dist_nyn = ny - inflow_disturbance_begin
2906	dist_nys(1) = ny - inflow_disturbance_end
2907	ELSEIF ( bc_ns == 'radiation/dirichlet' ) THEN
2908	dist_nys = inflow_disturbance_begin
2909	dist_nyn(1) = inflow_disturbance_end
2910	ELSEIF ( bc_ns == 'nested' .OR. bc_ns == 'nesting_offline' ) THEN
2911	dist_nyn = ny - inflow_disturbance_begin
2912	dist_nys = inflow_disturbance_begin
2913	ENDIF
2914	ENDIF
2915
2916	!
2917	!-- A turbulent inflow requires Dirichlet conditions at the respective inflow
2918	!-- boundary (so far, a turbulent inflow is realized from the left side only)
2919	IF ( turbulent_inflow .AND. bc_lr /= 'dirichlet/radiation' ) THEN
2920	message_string = 'turbulent_inflow = .T. requires a Dirichlet ' // &
2921	'condition at the inflow boundary'
2922	CALL message( 'check_parameters', 'PA0133', 1, 2, 0, 6, 0 )
2923	ENDIF
2924
2925	!
2926	!-- Turbulent inflow requires that 3d arrays have been cyclically filled with
2927	!-- data from prerun in the first main run
2928	IF ( turbulent_inflow .AND. initializing_actions /= 'cyclic_fill' .AND. &
2929	initializing_actions /= 'read_restart_data' ) THEN
2930	message_string = 'turbulent_inflow = .T. requires ' // &
2931	'initializing_actions = ''cyclic_fill'' or ' // &
2932	'initializing_actions = ''read_restart_data'' '
2933	CALL message( 'check_parameters', 'PA0055', 1, 2, 0, 6, 0 )
2934	ENDIF
2935
2936	!
2937	!-- In case of turbulent inflow
2938	IF ( turbulent_inflow ) THEN
2939
2940	!
2941	!-- Calculate the index of the recycling plane
2942	IF ( recycling_width <= dx .OR. recycling_width >= nx * dx ) THEN
2943	WRITE( message_string, * ) 'illegal value for recycling_width: ', &
2944	recycling_width
2945	CALL message( 'check_parameters', 'PA0134', 1, 2, 0, 6, 0 )
2946	ENDIF
2947	!
2948	!-- Calculate the index
2949	recycling_plane = recycling_width / dx
2950	!
2951	!-- Because the y-shift is done with a distance of INT( npey / 2 ) no shift
2952	!-- is possible if there is only one PE in y direction.
2953	IF ( recycling_yshift .AND. pdims(2) < 2 ) THEN
2954	WRITE( message_string, * ) 'recycling_yshift = .T. requires more', &
2955	' than one processor in y direction'
2956	CALL message( 'check_parameters', 'PA0421', 1, 2, 0, 6, 0 )
2957	ENDIF
2958
2959	!
2960	!-- Check for correct input of recycling method for thermodynamic quantities
2961	IF ( TRIM( recycling_method_for_thermodynamic_quantities ) /= 'turbulent_fluctuation' .AND. &
2962	TRIM( recycling_method_for_thermodynamic_quantities ) /= 'absolute_value' ) THEN
2963	WRITE( message_string, * ) 'unknown recycling method for thermodynamic quantities: ', &
2964	TRIM( recycling_method_for_thermodynamic_quantities )
2965	CALL message( 'check_parameters', 'PA0184', 1, 2, 0, 6, 0 )
2966	ENDIF
2967
2968	ENDIF
2969
2970
2971	IF ( turbulent_outflow ) THEN
2972	!
2973	!-- Turbulent outflow requires Dirichlet conditions at the respective inflow
2974	!-- boundary (so far, a turbulent outflow is realized at the right side only)
2975	IF ( bc_lr /= 'dirichlet/radiation' ) THEN
2976	message_string = 'turbulent_outflow = .T. requires ' // &
2977	'bc_lr = "dirichlet/radiation"'
2978	CALL message( 'check_parameters', 'PA0038', 1, 2, 0, 6, 0 )
2979	ENDIF
2980	!
2981	!-- The ouflow-source plane must lay inside the model domain
2982	IF ( outflow_source_plane < dx .OR. &
2983	outflow_source_plane > nx * dx ) THEN
2984	WRITE( message_string, * ) 'illegal value for outflow_source'// &
2985	'_plane: ', outflow_source_plane
2986	CALL message( 'check_parameters', 'PA0145', 1, 2, 0, 6, 0 )
2987	ENDIF
2988	ENDIF
2989
2990	!
2991	!-- Determine damping level index for 1D model
2992	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
2993	IF ( damp_level_1d == -1.0_wp ) THEN
2994	damp_level_1d = zu(nzt+1)
2995	damp_level_ind_1d = nzt + 1
2996	ELSEIF ( damp_level_1d < 0.0_wp .OR. damp_level_1d > zu(nzt+1) ) THEN
2997	WRITE( message_string, * ) 'damp_level_1d = ', damp_level_1d, &
2998	' must be >= 0.0 and <= ', zu(nzt+1), '(zu(nzt+1))'
2999	CALL message( 'check_parameters', 'PA0136', 1, 2, 0, 6, 0 )
3000	ELSE
3001	DO k = 1, nzt+1
3002	IF ( damp_level_1d <= zu(k) ) THEN
3003	damp_level_ind_1d = k
3004	EXIT
3005	ENDIF
3006	ENDDO
3007	ENDIF
3008	ENDIF
3009
3010	!
3011	!-- Check some other 1d-model parameters
3012	IF ( TRIM( mixing_length_1d ) /= 'as_in_3d_model' .AND. &
3013	TRIM( mixing_length_1d ) /= 'blackadar' ) THEN
3014	message_string = 'mixing_length_1d = "' // TRIM( mixing_length_1d ) // &
3015	'" is unknown'
3016	CALL message( 'check_parameters', 'PA0137', 1, 2, 0, 6, 0 )
3017	ENDIF
3018	IF ( TRIM( dissipation_1d ) /= 'as_in_3d_model' .AND. &
3019	TRIM( dissipation_1d ) /= 'detering' .AND. &
3020	TRIM( dissipation_1d ) /= 'prognostic' ) THEN
3021	message_string = 'dissipation_1d = "' // TRIM( dissipation_1d ) // &
3022	'" is unknown'
3023	CALL message( 'check_parameters', 'PA0138', 1, 2, 0, 6, 0 )
3024	ENDIF
3025	IF ( TRIM( mixing_length_1d ) /= 'as_in_3d_model' .AND. &
3026	TRIM( dissipation_1d ) == 'as_in_3d_model' ) THEN
3027	message_string = 'dissipation_1d = "' // TRIM( dissipation_1d ) // &
3028	'" requires mixing_length_1d = "as_in_3d_model"'
3029	CALL message( 'check_parameters', 'PA0485', 1, 2, 0, 6, 0 )
3030	ENDIF
3031
3032	!
3033	!-- Set time for the next user defined restart (time_restart is the
3034	!-- internal parameter for steering restart events)
3035	IF ( restart_time /= 9999999.9_wp ) THEN
3036	IF ( restart_time > time_since_reference_point ) THEN
3037	time_restart = restart_time
3038	ENDIF
3039	ELSE
3040	!
3041	!-- In case of a restart run, set internal parameter to default (no restart)
3042	!-- if the NAMELIST-parameter restart_time is omitted
3043	time_restart = 9999999.9_wp
3044	ENDIF
3045
3046	!
3047	!-- Check pressure gradient conditions
3048	IF ( dp_external .AND. conserve_volume_flow ) THEN
3049	WRITE( message_string, * ) 'Both dp_external and conserve_volume_flo', &
3050	'w are .TRUE. but one of them must be .FALSE.'
3051	CALL message( 'check_parameters', 'PA0150', 1, 2, 0, 6, 0 )
3052	ENDIF
3053	IF ( dp_external ) THEN
3054	IF ( dp_level_b < zu(nzb) .OR. dp_level_b > zu(nzt) ) THEN
3055	WRITE( message_string, * ) 'dp_level_b = ', dp_level_b, ' is out ', &
3056	' of range [zu(nzb), zu(nzt)]'
3057	CALL message( 'check_parameters', 'PA0151', 1, 2, 0, 6, 0 )
3058	ENDIF
3059	IF ( .NOT. ANY( dpdxy /= 0.0_wp ) ) THEN
3060	WRITE( message_string, * ) 'dp_external is .TRUE. but dpdxy is ze', &
3061	'ro, i.e. the external pressure gradient will not be applied'
3062	CALL message( 'check_parameters', 'PA0152', 0, 1, 0, 6, 0 )
3063	ENDIF
3064	ENDIF
3065	IF ( ANY( dpdxy /= 0.0_wp ) .AND. .NOT. dp_external ) THEN
3066	WRITE( message_string, * ) 'dpdxy is nonzero but dp_external is ', &
3067	'.FALSE., i.e. the external pressure gradient & will not be applied'
3068	CALL message( 'check_parameters', 'PA0153', 0, 1, 0, 6, 0 )
3069	ENDIF
3070	IF ( conserve_volume_flow ) THEN
3071	IF ( TRIM( conserve_volume_flow_mode ) == 'default' ) THEN
3072
3073	conserve_volume_flow_mode = 'initial_profiles'
3074
3075	ELSEIF ( TRIM( conserve_volume_flow_mode ) /= 'initial_profiles' .AND. &
3076	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) THEN
3077	WRITE( message_string, * ) 'unknown conserve_volume_flow_mode: ', &
3078	conserve_volume_flow_mode
3079	CALL message( 'check_parameters', 'PA0154', 1, 2, 0, 6, 0 )
3080	ENDIF
3081	IF ( (bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic') .AND. &
3082	TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
3083	WRITE( message_string, * ) 'non-cyclic boundary conditions ', &
3084	'require conserve_volume_flow_mode = ''initial_profiles'''
3085	CALL message( 'check_parameters', 'PA0155', 1, 2, 0, 6, 0 )
3086	ENDIF
3087	ENDIF
3088	IF ( ( u_bulk /= 0.0_wp .OR. v_bulk /= 0.0_wp ) .AND. &
3089	( .NOT. conserve_volume_flow .OR. &
3090	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) ) THEN
3091	WRITE( message_string, * ) 'nonzero bulk velocity requires ', &
3092	'conserve_volume_flow = .T. and ', &
3093	'conserve_volume_flow_mode = ''bulk_velocity'''
3094	CALL message( 'check_parameters', 'PA0157', 1, 2, 0, 6, 0 )
3095	ENDIF
3096
3097	!
3098	!-- Prevent empty time records in volume, cross-section and masked data in case
3099	!-- of non-parallel netcdf-output in restart runs
3100	IF ( netcdf_data_format < 5 ) THEN
3101	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
3102	do3d_time_count = 0
3103	do2d_xy_time_count = 0
3104	do2d_xz_time_count = 0
3105	do2d_yz_time_count = 0
3106	domask_time_count = 0
3107	ENDIF
3108	ENDIF
3109
3110
3111	!
3112	!-- Check roughness length, which has to be smaller than dz/2
3113	IF ( ( constant_flux_layer .OR. &
3114	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) &
3115	.AND. roughness_length >= 0.5 * dz(1) ) THEN
3116	message_string = 'roughness_length must be smaller than dz/2'
3117	CALL message( 'check_parameters', 'PA0424', 1, 2, 0, 6, 0 )
3118	ENDIF
3119
3120	!
3121	!-- Vertical nesting: check fine and coarse grid compatibility for data exchange
3122	IF ( vnested ) CALL vnest_check_parameters
3123
3124	!
3125	!-- Check if topography is read from file in case of complex terrain simulations
3126	IF ( complex_terrain .AND. TRIM( topography ) /= 'read_from_file' ) THEN
3127	message_string = 'complex_terrain requires topography' // &
3128	' = ''read_from_file'''
3129	CALL message( 'check_parameters', 'PA0295', 1, 2, 0, 6, 0 )
3130	ENDIF
3131
3132	!
3133	!-- Check if vertical grid stretching is switched off in case of complex
3134	!-- terrain simulations
3135	IF ( complex_terrain .AND. &
3136	ANY( dz_stretch_level_start /= -9999999.9_wp ) ) THEN
3137	message_string = 'Vertical grid stretching is not allowed for ' // &
3138	'complex_terrain = .T.'
3139	CALL message( 'check_parameters', 'PA0473', 1, 2, 0, 6, 0 )
3140	ENDIF
3141
3142	CALL location_message( 'checking parameters', 'finished' )
3143
3144	CONTAINS
3145
3146	!------------------------------------------------------------------------------!
3147	! Description:
3148	! ------------
3149	!> Check the length of data output intervals. In case of parallel NetCDF output
3150	!> the time levels of the output files need to be fixed. Therefore setting the
3151	!> output interval to 0.0s (usually used to output each timestep) is not
3152	!> possible as long as a non-fixed timestep is used.
3153	!------------------------------------------------------------------------------!
3154
3155	SUBROUTINE check_dt_do( dt_do, dt_do_name )
3156
3157	IMPLICIT NONE
3158
3159	CHARACTER (LEN=*), INTENT (IN) :: dt_do_name !< parin variable name
3160
3161	REAL(wp), INTENT (INOUT) :: dt_do !< data output interval
3162
3163	IF ( dt_do == 0.0_wp ) THEN
3164	IF ( dt_fixed ) THEN
3165	WRITE( message_string, '(A,F9.4,A)' ) 'Output at every ' // &
3166	'timestep is wanted (' // dt_do_name // ' = 0.0).&'// &
3167	'The output interval is set to the fixed timestep dt '// &
3168	'= ', dt, 's.'
3169	CALL message( 'check_parameters', 'PA0060', 0, 0, 0, 6, 0 )
3170	dt_do = dt
3171	ELSE
3172	message_string = dt_do_name // ' = 0.0 while using a ' // &
3173	'variable timestep and parallel netCDF4 ' // &
3174	'is not allowed.'
3175	CALL message( 'check_parameters', 'PA0081', 1, 2, 0, 6, 0 )
3176	ENDIF
3177	ENDIF
3178
3179	END SUBROUTINE check_dt_do
3180
3181
3182
3183	!------------------------------------------------------------------------------!
3184	! Description:
3185	! ------------
3186	!> Set the bottom and top boundary conditions for humidity and scalars.
3187	!------------------------------------------------------------------------------!
3188
3189	SUBROUTINE set_bc_scalars( sq, bc_b, bc_t, ibc_b, ibc_t, err_nr_b, err_nr_t )
3190
3191
3192	IMPLICIT NONE
3193
3194	CHARACTER (LEN=1) :: sq !< name of scalar quantity
3195	CHARACTER (LEN=*) :: bc_b !< bottom boundary condition
3196	CHARACTER (LEN=*) :: bc_t !< top boundary condition
3197	CHARACTER (LEN=*) :: err_nr_b !< error number if bottom bc is unknown
3198	CHARACTER (LEN=*) :: err_nr_t !< error number if top bc is unknown
3199
3200	INTEGER(iwp) :: ibc_b !< index for bottom boundary condition
3201	INTEGER(iwp) :: ibc_t !< index for top boundary condition
3202
3203	!
3204	!-- Set Integer flags and check for possilbe errorneous settings for bottom
3205	!-- boundary condition
3206	IF ( bc_b == 'dirichlet' ) THEN
3207	ibc_b = 0
3208	ELSEIF ( bc_b == 'neumann' ) THEN
3209	ibc_b = 1
3210	ELSE
3211	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
3212	'_b ="' // TRIM( bc_b ) // '"'
3213	CALL message( 'check_parameters', err_nr_b, 1, 2, 0, 6, 0 )
3214	ENDIF
3215	!
3216	!-- Set Integer flags and check for possilbe errorneous settings for top
3217	!-- boundary condition
3218	IF ( bc_t == 'dirichlet' ) THEN
3219	ibc_t = 0
3220	ELSEIF ( bc_t == 'neumann' ) THEN
3221	ibc_t = 1
3222	ELSEIF ( bc_t == 'initial_gradient' ) THEN
3223	ibc_t = 2
3224	ELSEIF ( bc_t == 'nested' .OR. bc_t == 'nesting_offline' ) THEN
3225	ibc_t = 3
3226	ELSE
3227	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
3228	'_t ="' // TRIM( bc_t ) // '"'
3229	CALL message( 'check_parameters', err_nr_t, 1, 2, 0, 6, 0 )
3230	ENDIF
3231
3232
3233	END SUBROUTINE set_bc_scalars
3234
3235
3236
3237	!------------------------------------------------------------------------------!
3238	! Description:
3239	! ------------
3240	!> Check for consistent settings of bottom boundary conditions for humidity
3241	!> and scalars.
3242	!------------------------------------------------------------------------------!
3243
3244	SUBROUTINE check_bc_scalars( sq, bc_b, ibc_b, &
3245	err_nr_1, err_nr_2, &
3246	constant_flux, surface_initial_change )
3247
3248
3249	IMPLICIT NONE
3250
3251	CHARACTER (LEN=1) :: sq !< name of scalar quantity
3252	CHARACTER (LEN=*) :: bc_b !< bottom boundary condition
3253	CHARACTER (LEN=*) :: err_nr_1 !< error number of first error
3254	CHARACTER (LEN=*) :: err_nr_2 !< error number of second error
3255
3256	INTEGER(iwp) :: ibc_b !< index of bottom boundary condition
3257
3258	LOGICAL :: constant_flux !< flag for constant-flux layer
3259
3260	REAL(wp) :: surface_initial_change !< value of initial change at the surface
3261
3262	!
3263	!-- A given surface value implies Dirichlet boundary condition for
3264	!-- the respective quantity. In this case specification of a constant flux is
3265	!-- forbidden. However, an exception is made for large-scale forcing as well
3266	!-- as land-surface model.
3267	IF ( .NOT. land_surface .AND. .NOT. large_scale_forcing ) THEN
3268	IF ( ibc_b == 0 .AND. constant_flux ) THEN
3269	message_string = 'boundary condition: bc_' // TRIM( sq ) // &
3270	'_b ' // '= "' // TRIM( bc_b ) // &
3271	'" is not allowed with prescribed surface flux'
3272	CALL message( 'check_parameters', err_nr_1, 1, 2, 0, 6, 0 )
3273	ENDIF
3274	ENDIF
3275	IF ( constant_flux .AND. surface_initial_change /= 0.0_wp ) THEN
3276	WRITE( message_string, * ) 'a prescribed surface flux is not allo', &
3277	'wed with ', sq, '_surface_initial_change (/=0) = ', &
3278	surface_initial_change
3279	CALL message( 'check_parameters', err_nr_2, 1, 2, 0, 6, 0 )
3280	ENDIF
3281
3282
3283	END SUBROUTINE check_bc_scalars
3284
3285
3286
3287	END SUBROUTINE check_parameters

Note: See TracBrowser for help on using the repository browser.

Context Navigation

source: palm/trunk/SOURCE/check_parameters.f90 @ 4210

Download in other formats: