Home

Context Navigation

source: palm/trunk/SOURCE/check_parameters.f90 @ 1989

Last change on this file since 1989 was 1985, checked in by suehring, 8 years ago

last commit documented

Property svn:keywords set to Id
Property svn:mergeinfo set to False
/palm/branches/forwind/SOURCE/check_parameters.f90 1564-1913

File size: 161.4 KB

Line
1	!> @file check_parameters.f90
2	!--------------------------------------------------------------------------------!
3	! This file is part of PALM.
4	!
5	! PALM is free software: you can redistribute it and/or modify it under the terms
6	! of the GNU General Public License as published by the Free Software Foundation,
7	! either version 3 of the License, or (at your option) any later version.
8	!
9	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
10	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
11	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
12	!
13	! You should have received a copy of the GNU General Public License along with
14	! PALM. If not, see <http://www.gnu.org/licenses/>.
15	!
16	! Copyright 1997-2016 Leibniz Universitaet Hannover
17	!--------------------------------------------------------------------------------!
18	!
19	! Current revisions:
20	! -----------------
21	!
22	!
23	! Former revisions:
24	! -----------------
25	! $Id: check_parameters.f90 1985 2016-08-01 14:49:02Z gronemeier $
26	!
27	! 1984 2016-08-01 14:48:05Z suehring
28	! Bugfix: checking for bottom and top boundary condition for humidity and scalars
29	!
30	! 1972 2016-07-26 07:52:02Z maronga
31	! Removed check of lai* (done in land surface module)
32	!
33	! 1970 2016-07-18 14:27:12Z suehring
34	! Bugfix, check for ibc_q_b and constant_waterflux in case of land-surface scheme
35	!
36	! 1962 2016-07-13 09:16:44Z suehring
37	! typo removed
38	!
39	! 1960 2016-07-12 16:34:24Z suehring
40	! Separate checks and calculations for humidity and passive scalar. Therefore,
41	! a subroutine to calculate vertical gradients is introduced, in order to reduce
42	! redundance.
43	! Additional check - large-scale forcing is not implemented for passive scalars
44	! so far.
45	!
46	! 1931 2016-06-10 12:06:59Z suehring
47	! Rename multigrid into multigrid_noopt and multigrid_fast into multigrid
48	!
49	! 1929 2016-06-09 16:25:25Z suehring
50	! Bugfix in check for use_upstream_for_tke
51	!
52	! 1918 2016-05-27 14:35:57Z raasch
53	! setting of a fixed reference state ('single_value') for ocean runs removed
54	!
55	! 1914 2016-05-26 14:44:07Z witha
56	! Added checks for the wind turbine model
57	!
58	! 1841 2016-04-07 19:14:06Z raasch
59	! redundant location message removed
60	!
61	! 1833 2016-04-07 14:23:03Z raasch
62	! check of spectra quantities moved to spectra_mod
63	!
64	! 1829 2016-04-07 12:16:29Z maronga
65	! Bugfix: output of user defined data required reset of the string 'unit'
66	!
67	! 1826 2016-04-07 12:01:39Z maronga
68	! Moved checks for radiation model to the respective module.
69	! Moved checks for plant canopy model to the respective module.
70	! Bugfix for check of too large roughness_length
71	!
72	! 1824 2016-04-07 09:55:29Z gronemeier
73	! Check if roughness_length < dz/2. Moved location_message(finished) to the end.
74	!
75	! 1822 2016-04-07 07:49:42Z hoffmann
76	! PALM collision kernel deleted. Collision algorithms are checked for correct
77	! spelling.
78	!
79	! Tails removed.
80	! !
81	! Checks for use_sgs_for_particles adopted for the use of droplets with
82	! use_sgs_for_particles adopted.
83	!
84	! Unused variables removed.
85	!
86	! 1817 2016-04-06 15:44:20Z maronga
87	! Moved checks for land_surface model to the respective module
88	!
89	! 1806 2016-04-05 18:55:35Z gronemeier
90	! Check for recycling_yshift
91	!
92	! 1804 2016-04-05 16:30:18Z maronga
93	! Removed code for parameter file check (__check)
94	!
95	! 1795 2016-03-18 15:00:53Z raasch
96	! Bugfix: setting of initial scalar profile in ocean
97	!
98	! 1788 2016-03-10 11:01:04Z maronga
99	! Added check for use of most_method = 'lookup' in combination with water
100	! surface presribed in the land surface model. Added output of z0q.
101	! Syntax layout improved.
102	!
103	! 1786 2016-03-08 05:49:27Z raasch
104	! cpp-direktives for spectra removed, check of spectra level removed
105	!
106	! 1783 2016-03-06 18:36:17Z raasch
107	! netcdf variables and module name changed,
108	! check of netcdf precision removed (is done in the netcdf module)
109	!
110	! 1764 2016-02-28 12:45:19Z raasch
111	! output of nest id in run description header,
112	! bugfix: check of validity of lateral boundary conditions moved to parin
113	!
114	! 1762 2016-02-25 12:31:13Z hellstea
115	! Introduction of nested domain feature
116	!
117	! 1745 2016-02-05 13:06:51Z gronemeier
118	! Bugfix: check data output intervals to be /= 0.0 in case of parallel NetCDF4
119	!
120	! 1701 2015-11-02 07:43:04Z maronga
121	! Bugfix: definition of rad_net timeseries was missing
122	!
123	! 1691 2015-10-26 16:17:44Z maronga
124	! Added output of Obukhov length (ol) and radiative heating rates for RRTMG.
125	! Added checks for use of radiation / lsm with topography.
126	!
127	! 1682 2015-10-07 23:56:08Z knoop
128	! Code annotations made doxygen readable
129	!
130	! 1606 2015-06-29 10:43:37Z maronga
131	! Added check for use of RRTMG without netCDF.
132	!
133	! 1587 2015-05-04 14:19:01Z maronga
134	! Added check for set of albedos when using RRTMG
135	!
136	! 1585 2015-04-30 07:05:52Z maronga
137	! Added support for RRTMG
138	!
139	! 1575 2015-03-27 09:56:27Z raasch
140	! multigrid_fast added as allowed pressure solver
141	!
142	! 1573 2015-03-23 17:53:37Z suehring
143	! Bugfix: check for advection schemes in case of non-cyclic boundary conditions
144	!
145	! 1557 2015-03-05 16:43:04Z suehring
146	! Added checks for monotonic limiter
147	!
148	! 1555 2015-03-04 17:44:27Z maronga
149	! Added output of r_a and r_s. Renumbering of LSM PA-messages.
150	!
151	! 1553 2015-03-03 17:33:54Z maronga
152	! Removed check for missing soil temperature profile as default values were added.
153	!
154	! 1551 2015-03-03 14:18:16Z maronga
155	! Added various checks for land surface and radiation model. In the course of this
156	! action, the length of the variable var has to be increased
157	!
158	! 1504 2014-12-04 09:23:49Z maronga
159	! Bugfix: check for large_scale forcing got lost.
160	!
161	! 1500 2014-12-03 17:42:41Z maronga
162	! Boundary conditions changed to dirichlet for land surface model
163	!
164	! 1496 2014-12-02 17:25:50Z maronga
165	! Added checks for the land surface model
166	!
167	! 1484 2014-10-21 10:53:05Z kanani
168	! Changes due to new module structure of the plant canopy model:
169	! module plant_canopy_model_mod added,
170	! checks regarding usage of new method for leaf area density profile
171	! construction added,
172	! lad-profile construction moved to new subroutine init_plant_canopy within
173	! the module plant_canopy_model_mod,
174	! drag_coefficient renamed to canopy_drag_coeff.
175	! Missing KIND-attribute for REAL constant added
176	!
177	! 1455 2014-08-29 10:47:47Z heinze
178	! empty time records in volume, cross-section and masked data output prevented
179	! in case of non-parallel netcdf-output in restart runs
180	!
181	! 1429 2014-07-15 12:53:45Z knoop
182	! run_description_header exended to provide ensemble_member_nr if specified
183	!
184	! 1425 2014-07-05 10:57:53Z knoop
185	! bugfix: perturbation domain modified for parallel random number generator
186	!
187	! 1402 2014-05-09 14:25:13Z raasch
188	! location messages modified
189	!
190	! 1400 2014-05-09 14:03:54Z knoop
191	! Check random generator extended by option random-parallel
192	!
193	! 1384 2014-05-02 14:31:06Z raasch
194	! location messages added
195	!
196	! 1365 2014-04-22 15:03:56Z boeske
197	! Usage of large scale forcing for pt and q enabled:
198	! output for profiles of large scale advection (td_lsa_lpt, td_lsa_q),
199	! large scale subsidence (td_sub_lpt, td_sub_q)
200	! and nudging tendencies (td_nud_lpt, td_nud_q, td_nud_u and td_nud_v) added,
201	! check if use_subsidence_tendencies is used correctly
202	!
203	! 1361 2014-04-16 15:17:48Z hoffmann
204	! PA0363 removed
205	! PA0362 changed
206	!
207	! 1359 2014-04-11 17:15:14Z hoffmann
208	! Do not allow the execution of PALM with use_particle_tails, since particle
209	! tails are currently not supported by our new particle structure.
210	!
211	! PA0084 not necessary for new particle structure
212	!
213	! 1353 2014-04-08 15:21:23Z heinze
214	! REAL constants provided with KIND-attribute
215	!
216	! 1330 2014-03-24 17:29:32Z suehring
217	! In case of SGS-particle velocity advection of TKE is also allowed with
218	! dissipative 5th-order scheme.
219	!
220	! 1327 2014-03-21 11:00:16Z raasch
221	! "baroclinicity" renamed "baroclinity", "ocean version" replaced by "ocean mode"
222	! bugfix: duplicate error message 56 removed,
223	! check of data_output_format and do3d_compress removed
224	!
225	! 1322 2014-03-20 16:38:49Z raasch
226	! some REAL constants defined as wp-kind
227	!
228	! 1320 2014-03-20 08:40:49Z raasch
229	! Kind-parameters added to all INTEGER and REAL declaration statements,
230	! kinds are defined in new module kinds,
231	! revision history before 2012 removed,
232	! comment fields (!:) to be used for variable explanations added to
233	! all variable declaration statements
234	!
235	! 1308 2014-03-13 14:58:42Z fricke
236	! +netcdf_data_format_save
237	! Calculate fixed number of output time levels for parallel netcdf output.
238	! For masked data, parallel netcdf output is not tested so far, hence
239	! netcdf_data_format is switched back to non-paralell output.
240	!
241	! 1299 2014-03-06 13:15:21Z heinze
242	! enable usage of large_scale subsidence in combination with large_scale_forcing
243	! output for profile of large scale vertical velocity w_subs added
244	!
245	! 1276 2014-01-15 13:40:41Z heinze
246	! Use LSF_DATA also in case of Dirichlet bottom boundary condition for scalars
247	!
248	! 1241 2013-10-30 11:36:58Z heinze
249	! output for profiles of ug and vg added
250	! set surface_heatflux and surface_waterflux also in dependence on
251	! large_scale_forcing
252	! checks for nudging and large scale forcing from external file
253	!
254	! 1236 2013-09-27 07:21:13Z raasch
255	! check number of spectra levels
256	!
257	! 1216 2013-08-26 09:31:42Z raasch
258	! check for transpose_compute_overlap (temporary)
259	!
260	! 1214 2013-08-21 12:29:17Z kanani
261	! additional check for simultaneous use of vertical grid stretching
262	! and particle advection
263	!
264	! 1212 2013-08-15 08:46:27Z raasch
265	! checks for poisfft_hybrid removed
266	!
267	! 1210 2013-08-14 10:58:20Z raasch
268	! check for fftw
269	!
270	! 1179 2013-06-14 05:57:58Z raasch
271	! checks and settings of buoyancy parameters and switches revised,
272	! initial profile for rho added to hom (id=77)
273	!
274	! 1174 2013-05-31 10:28:08Z gryschka
275	! Bugfix in computing initial profiles for ug, vg, lad, q in case of Atmosphere
276	!
277	! 1159 2013-05-21 11:58:22Z fricke
278	! bc_lr/ns_dirneu/neudir removed
279	!
280	! 1115 2013-03-26 18:16:16Z hoffmann
281	! unused variables removed
282	! drizzle can be used without precipitation
283	!
284	! 1111 2013-03-08 23:54:10Z raasch
285	! ibc_p_b = 2 removed
286	!
287	! 1103 2013-02-20 02:15:53Z raasch
288	! Bugfix: turbulent inflow must not require cyclic fill in restart runs
289	!
290	! 1092 2013-02-02 11:24:22Z raasch
291	! unused variables removed
292	!
293	! 1069 2012-11-28 16:18:43Z maronga
294	! allow usage of topography in combination with cloud physics
295	!
296	! 1065 2012-11-22 17:42:36Z hoffmann
297	! Bugfix: It is not allowed to use cloud_scheme = seifert_beheng without
298	! precipitation in order to save computational resources.
299	!
300	! 1060 2012-11-21 07:19:51Z raasch
301	! additional check for parameter turbulent_inflow
302	!
303	! 1053 2012-11-13 17:11:03Z hoffmann
304	! necessary changes for the new two-moment cloud physics scheme added:
305	! - check cloud physics scheme (Kessler or Seifert and Beheng)
306	! - plant_canopy is not allowed
307	! - currently, only cache loop_optimization is allowed
308	! - initial profiles of nr, qr
309	! - boundary condition of nr, qr
310	! - check output quantities (qr, nr, prr)
311	!
312	! 1036 2012-10-22 13:43:42Z raasch
313	! code put under GPL (PALM 3.9)
314	!
315	! 1031/1034 2012-10-22 11:32:49Z raasch
316	! check of netcdf4 parallel file support
317	!
318	! 1019 2012-09-28 06:46:45Z raasch
319	! non-optimized version of prognostic_equations not allowed any more
320	!
321	! 1015 2012-09-27 09:23:24Z raasch
322	! acc allowed for loop optimization,
323	! checks for adjustment of mixing length to the Prandtl mixing length removed
324	!
325	! 1003 2012-09-14 14:35:53Z raasch
326	! checks for cases with unequal subdomain sizes removed
327	!
328	! 1001 2012-09-13 14:08:46Z raasch
329	! all actions concerning leapfrog- and upstream-spline-scheme removed
330	!
331	! 996 2012-09-07 10:41:47Z raasch
332	! little reformatting
333
334	! 978 2012-08-09 08:28:32Z fricke
335	! setting of bc_lr/ns_dirneu/neudir
336	! outflow damping layer removed
337	! check for z0h*
338	! check for pt_damping_width
339	!
340	! 964 2012-07-26 09:14:24Z raasch
341	! check of old profil-parameters removed
342	!
343	! 940 2012-07-09 14:31:00Z raasch
344	! checks for parameter neutral
345	!
346	! 924 2012-06-06 07:44:41Z maronga
347	! Bugfix: preprocessor directives caused error during compilation
348	!
349	! 892 2012-05-02 13:51:44Z maronga
350	! Bugfix for parameter file check ( excluding __netcdf4 )
351	!
352	! 866 2012-03-28 06:44:41Z raasch
353	! use only 60% of the geostrophic wind as translation speed in case of Galilean
354	! transformation and use_ug_for_galilei_tr = .T. in order to mimimize the
355	! timestep
356	!
357	! 861 2012-03-26 14:18:34Z suehring
358	! Check for topography and ws-scheme removed.
359	! Check for loop_optimization = 'vector' and ws-scheme removed.
360	!
361	! 845 2012-03-07 10:23:05Z maronga
362	! Bugfix: exclude __netcdf4 directive part from namelist file check compilation
363	!
364	! 828 2012-02-21 12:00:36Z raasch
365	! check of collision_kernel extended
366	!
367	! 825 2012-02-19 03:03:44Z raasch
368	! check for collision_kernel and curvature_solution_effects
369	!
370	! 809 2012-01-30 13:32:58Z maronga
371	! Bugfix: replaced .AND. and .NOT. with && and ! in the preprocessor directives
372	!
373	! 807 2012-01-25 11:53:51Z maronga
374	! New cpp directive "__check" implemented which is used by check_namelist_files
375	!
376	! Revision 1.1 1997/08/26 06:29:23 raasch
377	! Initial revision
378	!
379	!
380	! Description:
381	! ------------
382	!> Check control parameters and deduce further quantities.
383	!------------------------------------------------------------------------------!
384	SUBROUTINE check_parameters
385
386
387	USE arrays_3d
388	USE cloud_parameters
389	USE constants
390	USE control_parameters
391	USE dvrp_variables
392	USE grid_variables
393	USE indices
394	USE land_surface_model_mod, &
395	ONLY: land_surface, lsm_check_data_output, lsm_check_data_output_pr, &
396	lsm_check_parameters
397
398	USE kinds
399	USE model_1d
400	USE netcdf_interface, &
401	ONLY: dopr_unit, do2d_unit, do3d_unit, netcdf_data_format, &
402	netcdf_data_format_string
403
404	USE particle_attributes
405	USE pegrid
406	USE plant_canopy_model_mod, &
407	ONLY: pcm_check_parameters, plant_canopy
408
409	USE pmc_interface, &
410	ONLY: cpl_id, nested_run
411
412	USE profil_parameter
413	USE radiation_model_mod, &
414	ONLY: radiation, radiation_check_data_output, &
415	radiation_check_data_output_pr, radiation_check_parameters
416	USE spectra_mod, &
417	ONLY: calculate_spectra, spectra_check_parameters
418	USE statistics
419	USE subsidence_mod
420	USE statistics
421	USE transpose_indices
422	USE wind_turbine_model_mod, &
423	ONLY: wtm_check_parameters, wind_turbine
424
425
426	IMPLICIT NONE
427
428	CHARACTER (LEN=1) :: sq !<
429	CHARACTER (LEN=15) :: var !<
430	CHARACTER (LEN=7) :: unit !<
431	CHARACTER (LEN=8) :: date !<
432	CHARACTER (LEN=10) :: time !<
433	CHARACTER (LEN=10) :: ensemble_string !<
434	CHARACTER (LEN=15) :: nest_string !<
435	CHARACTER (LEN=40) :: coupling_string !<
436	CHARACTER (LEN=100) :: action !<
437
438	INTEGER(iwp) :: i !<
439	INTEGER(iwp) :: ilen !<
440	INTEGER(iwp) :: j !<
441	INTEGER(iwp) :: k !<
442	INTEGER(iwp) :: kk !<
443	INTEGER(iwp) :: netcdf_data_format_save !<
444	INTEGER(iwp) :: position !<
445
446	LOGICAL :: found !<
447
448	REAL(wp) :: gradient !<
449	REAL(wp) :: remote = 0.0_wp !<
450	REAL(wp) :: simulation_time_since_reference !<
451
452
453	CALL location_message( 'checking parameters', .FALSE. )
454
455	!
456	!-- Check for overlap combinations, which are not realized yet
457	IF ( transpose_compute_overlap ) THEN
458	IF ( numprocs == 1 ) STOP '+++ transpose-compute-overlap not implemented for single PE runs'
459	#if defined( __openacc )
460	STOP '+++ transpose-compute-overlap not implemented for GPU usage'
461	#endif
462	ENDIF
463
464	!
465	!-- Warning, if host is not set
466	IF ( host(1:1) == ' ' ) THEN
467	message_string = '"host" is not set. Please check that environment ' // &
468	'variable "localhost" & is set before running PALM'
469	CALL message( 'check_parameters', 'PA0001', 0, 0, 0, 6, 0 )
470	ENDIF
471
472	!
473	!-- Check the coupling mode
474	IF ( coupling_mode /= 'uncoupled' .AND. &
475	coupling_mode /= 'atmosphere_to_ocean' .AND. &
476	coupling_mode /= 'ocean_to_atmosphere' ) THEN
477	message_string = 'illegal coupling mode: ' // TRIM( coupling_mode )
478	CALL message( 'check_parameters', 'PA0002', 1, 2, 0, 6, 0 )
479	ENDIF
480
481	!
482	!-- Check dt_coupling, restart_time, dt_restart, end_time, dx, dy, nx and ny
483	IF ( coupling_mode /= 'uncoupled') THEN
484
485	IF ( dt_coupling == 9999999.9_wp ) THEN
486	message_string = 'dt_coupling is not set but required for coup' // &
487	'ling mode "' // TRIM( coupling_mode ) // '"'
488	CALL message( 'check_parameters', 'PA0003', 1, 2, 0, 6, 0 )
489	ENDIF
490
491	#if defined( __parallel )
492
493	!
494	!-- NOTE: coupled runs have not been implemented in the check_namelist_files
495	!-- program.
496	!-- check_namelist_files will need the following information of the other
497	!-- model (atmosphere/ocean).
498	! dt_coupling = remote
499	! dt_max = remote
500	! restart_time = remote
501	! dt_restart= remote
502	! simulation_time_since_reference = remote
503	! dx = remote
504
505
506	IF ( myid == 0 ) THEN
507	CALL MPI_SEND( dt_coupling, 1, MPI_REAL, target_id, 11, comm_inter, &
508	ierr )
509	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 11, comm_inter, &
510	status, ierr )
511	ENDIF
512	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
513
514	IF ( dt_coupling /= remote ) THEN
515	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
516	'": dt_coupling = ', dt_coupling, '& is not equal to ', &
517	'dt_coupling_remote = ', remote
518	CALL message( 'check_parameters', 'PA0004', 1, 2, 0, 6, 0 )
519	ENDIF
520	IF ( dt_coupling <= 0.0_wp ) THEN
521
522	IF ( myid == 0 ) THEN
523	CALL MPI_SEND( dt_max, 1, MPI_REAL, target_id, 19, comm_inter, ierr )
524	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 19, comm_inter, &
525	status, ierr )
526	ENDIF
527	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
528
529	dt_coupling = MAX( dt_max, remote )
530	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
531	'": dt_coupling <= 0.0 & is not allowed and is reset to ', &
532	'MAX(dt_max(A,O)) = ', dt_coupling
533	CALL message( 'check_parameters', 'PA0005', 0, 1, 0, 6, 0 )
534	ENDIF
535
536	IF ( myid == 0 ) THEN
537	CALL MPI_SEND( restart_time, 1, MPI_REAL, target_id, 12, comm_inter, &
538	ierr )
539	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 12, comm_inter, &
540	status, ierr )
541	ENDIF
542	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
543
544	IF ( restart_time /= remote ) THEN
545	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
546	'": restart_time = ', restart_time, '& is not equal to ', &
547	'restart_time_remote = ', remote
548	CALL message( 'check_parameters', 'PA0006', 1, 2, 0, 6, 0 )
549	ENDIF
550
551	IF ( myid == 0 ) THEN
552	CALL MPI_SEND( dt_restart, 1, MPI_REAL, target_id, 13, comm_inter, &
553	ierr )
554	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 13, comm_inter, &
555	status, ierr )
556	ENDIF
557	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
558
559	IF ( dt_restart /= remote ) THEN
560	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
561	'": dt_restart = ', dt_restart, '& is not equal to ', &
562	'dt_restart_remote = ', remote
563	CALL message( 'check_parameters', 'PA0007', 1, 2, 0, 6, 0 )
564	ENDIF
565
566	simulation_time_since_reference = end_time - coupling_start_time
567
568	IF ( myid == 0 ) THEN
569	CALL MPI_SEND( simulation_time_since_reference, 1, MPI_REAL, target_id, &
570	14, comm_inter, ierr )
571	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 14, comm_inter, &
572	status, ierr )
573	ENDIF
574	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
575
576	IF ( simulation_time_since_reference /= remote ) THEN
577	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
578	'": simulation_time_since_reference = ', &
579	simulation_time_since_reference, '& is not equal to ', &
580	'simulation_time_since_reference_remote = ', remote
581	CALL message( 'check_parameters', 'PA0008', 1, 2, 0, 6, 0 )
582	ENDIF
583
584	IF ( myid == 0 ) THEN
585	CALL MPI_SEND( dx, 1, MPI_REAL, target_id, 15, comm_inter, ierr )
586	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 15, comm_inter, &
587	status, ierr )
588	ENDIF
589	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
590
591
592	IF ( coupling_mode == 'atmosphere_to_ocean') THEN
593
594	IF ( dx < remote ) THEN
595	WRITE( message_string, * ) 'coupling mode "', &
596	TRIM( coupling_mode ), &
597	'": dx in Atmosphere is not equal to or not larger then dx in ocean'
598	CALL message( 'check_parameters', 'PA0009', 1, 2, 0, 6, 0 )
599	ENDIF
600
601	IF ( (nx_a+1)dx /= (nx_o+1)remote ) THEN
602	WRITE( message_string, * ) 'coupling mode "', &
603	TRIM( coupling_mode ), &
604	'": Domain size in x-direction is not equal in ocean and atmosphere'
605	CALL message( 'check_parameters', 'PA0010', 1, 2, 0, 6, 0 )
606	ENDIF
607
608	ENDIF
609
610	IF ( myid == 0) THEN
611	CALL MPI_SEND( dy, 1, MPI_REAL, target_id, 16, comm_inter, ierr )
612	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 16, comm_inter, &
613	status, ierr )
614	ENDIF
615	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
616
617	IF ( coupling_mode == 'atmosphere_to_ocean') THEN
618
619	IF ( dy < remote ) THEN
620	WRITE( message_string, * ) 'coupling mode "', &
621	TRIM( coupling_mode ), &
622	'": dy in Atmosphere is not equal to or not larger then dy in ocean'
623	CALL message( 'check_parameters', 'PA0011', 1, 2, 0, 6, 0 )
624	ENDIF
625
626	IF ( (ny_a+1)dy /= (ny_o+1)remote ) THEN
627	WRITE( message_string, * ) 'coupling mode "', &
628	TRIM( coupling_mode ), &
629	'": Domain size in y-direction is not equal in ocean and atmosphere'
630	CALL message( 'check_parameters', 'PA0012', 1, 2, 0, 6, 0 )
631	ENDIF
632
633	IF ( MOD(nx_o+1,nx_a+1) /= 0 ) THEN
634	WRITE( message_string, * ) 'coupling mode "', &
635	TRIM( coupling_mode ), &
636	'": nx+1 in ocean is not divisible without remainder with nx+1 in', &
637	' atmosphere'
638	CALL message( 'check_parameters', 'PA0339', 1, 2, 0, 6, 0 )
639	ENDIF
640
641	IF ( MOD(ny_o+1,ny_a+1) /= 0 ) THEN
642	WRITE( message_string, * ) 'coupling mode "', &
643	TRIM( coupling_mode ), &
644	'": ny+1 in ocean is not divisible without remainder with ny+1 in', &
645	' atmosphere'
646	CALL message( 'check_parameters', 'PA0340', 1, 2, 0, 6, 0 )
647	ENDIF
648
649	ENDIF
650	#else
651	WRITE( message_string, * ) 'coupling requires PALM to be called with', &
652	' ''mrun -K parallel'''
653	CALL message( 'check_parameters', 'PA0141', 1, 2, 0, 6, 0 )
654	#endif
655	ENDIF
656
657	#if defined( __parallel )
658	!
659	!-- Exchange via intercommunicator
660	IF ( coupling_mode == 'atmosphere_to_ocean' .AND. myid == 0 ) THEN
661	CALL MPI_SEND( humidity, 1, MPI_LOGICAL, target_id, 19, comm_inter, &
662	ierr )
663	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' .AND. myid == 0) THEN
664	CALL MPI_RECV( humidity_remote, 1, MPI_LOGICAL, target_id, 19, &
665	comm_inter, status, ierr )
666	ENDIF
667	CALL MPI_BCAST( humidity_remote, 1, MPI_LOGICAL, 0, comm2d, ierr)
668
669	#endif
670
671
672	!
673	!-- Generate the file header which is used as a header for most of PALM's
674	!-- output files
675	CALL DATE_AND_TIME( date, time )
676	run_date = date(7:8)//'-'//date(5:6)//'-'//date(3:4)
677	run_time = time(1:2)//':'//time(3:4)//':'//time(5:6)
678	IF ( coupling_mode == 'uncoupled' ) THEN
679	coupling_string = ''
680	ELSEIF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
681	coupling_string = ' coupled (atmosphere)'
682	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
683	coupling_string = ' coupled (ocean)'
684	ENDIF
685	IF ( ensemble_member_nr /= 0 ) THEN
686	WRITE( ensemble_string, '(2X,A,I2.2)' ) 'en-no: ', ensemble_member_nr
687	ELSE
688	ensemble_string = ''
689	ENDIF
690	IF ( nested_run ) THEN
691	WRITE( nest_string, '(2X,A,I2.2)' ) 'nest-id: ', cpl_id
692	ELSE
693	nest_string = ''
694	ENDIF
695
696	WRITE ( run_description_header, &
697	'(A,2X,A,2X,A,A,A,I2.2,A,A,A,2X,A,A,2X,A,1X,A)' ) &
698	TRIM( version ), TRIM( revision ), 'run: ', &
699	TRIM( run_identifier ), '.', runnr, TRIM( coupling_string ), &
700	TRIM( nest_string ), TRIM( ensemble_string), 'host: ', TRIM( host ), &
701	run_date, run_time
702
703	!
704	!-- Check the general loop optimization method
705	IF ( loop_optimization == 'default' ) THEN
706	IF ( host(1:3) == 'nec' ) THEN
707	loop_optimization = 'vector'
708	ELSE
709	loop_optimization = 'cache'
710	ENDIF
711	ENDIF
712
713	SELECT CASE ( TRIM( loop_optimization ) )
714
715	CASE ( 'acc', 'cache', 'vector' )
716	CONTINUE
717
718	CASE DEFAULT
719	message_string = 'illegal value given for loop_optimization: "' // &
720	TRIM( loop_optimization ) // '"'
721	CALL message( 'check_parameters', 'PA0013', 1, 2, 0, 6, 0 )
722
723	END SELECT
724
725	!
726	!-- Check if vertical grid stretching is used together with particles
727	IF ( dz_stretch_level < 100000.0_wp .AND. particle_advection ) THEN
728	message_string = 'Vertical grid stretching is not allowed together ' // &
729	'with particle advection.'
730	CALL message( 'check_parameters', 'PA0017', 1, 2, 0, 6, 0 )
731	ENDIF
732
733	!
734	!-- Check topography setting (check for illegal parameter combinations)
735	IF ( topography /= 'flat' ) THEN
736	action = ' '
737	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'ws-scheme' &
738	.AND. scalar_advec /= 'ws-scheme-mono' ) THEN
739	WRITE( action, '(A,A)' ) 'scalar_advec = ', scalar_advec
740	ENDIF
741	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme' )&
742	THEN
743	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
744	ENDIF
745	IF ( psolver == 'sor' ) THEN
746	WRITE( action, '(A,A)' ) 'psolver = ', psolver
747	ENDIF
748	IF ( sloping_surface ) THEN
749	WRITE( action, '(A)' ) 'sloping surface = .TRUE.'
750	ENDIF
751	IF ( galilei_transformation ) THEN
752	WRITE( action, '(A)' ) 'galilei_transformation = .TRUE.'
753	ENDIF
754	IF ( cloud_physics ) THEN
755	WRITE( action, '(A)' ) 'cloud_physics = .TRUE.'
756	ENDIF
757	IF ( cloud_droplets ) THEN
758	WRITE( action, '(A)' ) 'cloud_droplets = .TRUE.'
759	ENDIF
760	IF ( .NOT. constant_flux_layer ) THEN
761	WRITE( action, '(A)' ) 'constant_flux_layer = .FALSE.'
762	ENDIF
763	IF ( action /= ' ' ) THEN
764	message_string = 'a non-flat topography does not allow ' // &
765	TRIM( action )
766	CALL message( 'check_parameters', 'PA0014', 1, 2, 0, 6, 0 )
767	ENDIF
768	!
769	!-- In case of non-flat topography, check whether the convention how to
770	!-- define the topography grid has been set correctly, or whether the default
771	!-- is applicable. If this is not possible, abort.
772	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
773	IF ( TRIM( topography ) /= 'single_building' .AND. &
774	TRIM( topography ) /= 'single_street_canyon' .AND. &
775	TRIM( topography ) /= 'read_from_file' ) THEN
776	!-- The default value is not applicable here, because it is only valid
777	!-- for the two standard cases 'single_building' and 'read_from_file'
778	!-- defined in init_grid.
779	WRITE( message_string, * ) &
780	'The value for "topography_grid_convention" ', &
781	'is not set. Its default value is & only valid for ', &
782	'"topography" = ''single_building'', ', &
783	'''single_street_canyon'' & or ''read_from_file''.', &
784	' & Choose ''cell_edge'' or ''cell_center''.'
785	CALL message( 'check_parameters', 'PA0239', 1, 2, 0, 6, 0 )
786	ELSE
787	!-- The default value is applicable here.
788	!-- Set convention according to topography.
789	IF ( TRIM( topography ) == 'single_building' .OR. &
790	TRIM( topography ) == 'single_street_canyon' ) THEN
791	topography_grid_convention = 'cell_edge'
792	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
793	topography_grid_convention = 'cell_center'
794	ENDIF
795	ENDIF
796	ELSEIF ( TRIM( topography_grid_convention ) /= 'cell_edge' .AND. &
797	TRIM( topography_grid_convention ) /= 'cell_center' ) THEN
798	WRITE( message_string, * ) &
799	'The value for "topography_grid_convention" is ', &
800	'not recognized. & Choose ''cell_edge'' or ''cell_center''.'
801	CALL message( 'check_parameters', 'PA0240', 1, 2, 0, 6, 0 )
802	ENDIF
803
804	ENDIF
805
806	!
807	!-- Check ocean setting
808	IF ( ocean ) THEN
809
810	action = ' '
811	IF ( action /= ' ' ) THEN
812	message_string = 'ocean = .T. does not allow ' // TRIM( action )
813	CALL message( 'check_parameters', 'PA0015', 1, 2, 0, 6, 0 )
814	ENDIF
815
816	ELSEIF ( TRIM( coupling_mode ) == 'uncoupled' .AND. &
817	TRIM( coupling_char ) == '_O' ) THEN
818
819	!
820	!-- Check whether an (uncoupled) atmospheric run has been declared as an
821	!-- ocean run (this setting is done via mrun-option -y)
822	message_string = 'ocean = .F. does not allow coupling_char = "' // &
823	TRIM( coupling_char ) // '" set by mrun-option "-y"'
824	CALL message( 'check_parameters', 'PA0317', 1, 2, 0, 6, 0 )
825
826	ENDIF
827	!
828	!-- Check cloud scheme
829	IF ( cloud_scheme == 'saturation_adjust' ) THEN
830	microphysics_sat_adjust = .TRUE.
831	microphysics_seifert = .FALSE.
832	microphysics_kessler = .FALSE.
833	precipitation = .FALSE.
834	ELSEIF ( cloud_scheme == 'seifert_beheng' ) THEN
835	microphysics_sat_adjust = .FALSE.
836	microphysics_seifert = .TRUE.
837	microphysics_kessler = .FALSE.
838	precipitation = .TRUE.
839	ELSEIF ( cloud_scheme == 'kessler' ) THEN
840	microphysics_sat_adjust = .FALSE.
841	microphysics_seifert = .FALSE.
842	microphysics_kessler = .TRUE.
843	precipitation = .TRUE.
844	ELSE
845	message_string = 'unknown cloud microphysics scheme cloud_scheme ="' // &
846	TRIM( cloud_scheme ) // '"'
847	CALL message( 'check_parameters', 'PA0357', 1, 2, 0, 6, 0 )
848	ENDIF
849	!
850	!-- Check whether there are any illegal values
851	!-- Pressure solver:
852	IF ( psolver /= 'poisfft' .AND. psolver /= 'sor' .AND. &
853	psolver /= 'multigrid' .AND. psolver /= 'multigrid_noopt' ) THEN
854	message_string = 'unknown solver for perturbation pressure: psolver' // &
855	' = "' // TRIM( psolver ) // '"'
856	CALL message( 'check_parameters', 'PA0016', 1, 2, 0, 6, 0 )
857	ENDIF
858
859	IF ( psolver(1:9) == 'multigrid' ) THEN
860	IF ( cycle_mg == 'w' ) THEN
861	gamma_mg = 2
862	ELSEIF ( cycle_mg == 'v' ) THEN
863	gamma_mg = 1
864	ELSE
865	message_string = 'unknown multigrid cycle: cycle_mg = "' // &
866	TRIM( cycle_mg ) // '"'
867	CALL message( 'check_parameters', 'PA0020', 1, 2, 0, 6, 0 )
868	ENDIF
869	ENDIF
870
871	IF ( fft_method /= 'singleton-algorithm' .AND. &
872	fft_method /= 'temperton-algorithm' .AND. &
873	fft_method /= 'fftw' .AND. &
874	fft_method /= 'system-specific' ) THEN
875	message_string = 'unknown fft-algorithm: fft_method = "' // &
876	TRIM( fft_method ) // '"'
877	CALL message( 'check_parameters', 'PA0021', 1, 2, 0, 6, 0 )
878	ENDIF
879
880	IF( momentum_advec == 'ws-scheme' .AND. &
881	.NOT. call_psolver_at_all_substeps ) THEN
882	message_string = 'psolver must be called at each RK3 substep when "'// &
883	TRIM(momentum_advec) // ' "is used for momentum_advec'
884	CALL message( 'check_parameters', 'PA0344', 1, 2, 0, 6, 0 )
885	END IF
886	!
887	!-- Advection schemes:
888	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme' ) &
889	THEN
890	message_string = 'unknown advection scheme: momentum_advec = "' // &
891	TRIM( momentum_advec ) // '"'
892	CALL message( 'check_parameters', 'PA0022', 1, 2, 0, 6, 0 )
893	ENDIF
894	IF ( ( momentum_advec == 'ws-scheme' .OR. scalar_advec == 'ws-scheme' &
895	.OR. scalar_advec == 'ws-scheme-mono' ) &
896	.AND. ( timestep_scheme == 'euler' .OR. &
897	timestep_scheme == 'runge-kutta-2' ) ) &
898	THEN
899	message_string = 'momentum_advec or scalar_advec = "' &
900	// TRIM( momentum_advec ) // '" is not allowed with timestep_scheme = "' // &
901	TRIM( timestep_scheme ) // '"'
902	CALL message( 'check_parameters', 'PA0023', 1, 2, 0, 6, 0 )
903	ENDIF
904	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'ws-scheme' .AND. &
905	scalar_advec /= 'ws-scheme-mono' .AND. scalar_advec /= 'bc-scheme' ) &
906	THEN
907	message_string = 'unknown advection scheme: scalar_advec = "' // &
908	TRIM( scalar_advec ) // '"'
909	CALL message( 'check_parameters', 'PA0024', 1, 2, 0, 6, 0 )
910	ENDIF
911	IF ( scalar_advec == 'bc-scheme' .AND. loop_optimization == 'cache' ) &
912	THEN
913	message_string = 'advection_scheme scalar_advec = "' &
914	// TRIM( scalar_advec ) // '" not implemented for & loop_optimization = "' // &
915	TRIM( loop_optimization ) // '"'
916	CALL message( 'check_parameters', 'PA0026', 1, 2, 0, 6, 0 )
917	ENDIF
918
919	IF ( use_sgs_for_particles .AND. .NOT. cloud_droplets .AND. &
920	.NOT. use_upstream_for_tke .AND. &
921	( scalar_advec /= 'ws-scheme' .AND. scalar_advec /= 'ws-scheme-mono' )&
922	) THEN
923	use_upstream_for_tke = .TRUE.
924	message_string = 'use_upstream_for_tke set .TRUE. because ' // &
925	'use_sgs_for_particles = .TRUE. ' // &
926	'and scalar_advec /= ws-scheme'
927	CALL message( 'check_parameters', 'PA0025', 0, 1, 0, 6, 0 )
928	ENDIF
929
930	IF ( use_sgs_for_particles .AND. curvature_solution_effects ) THEN
931	message_string = 'use_sgs_for_particles = .TRUE. not allowed with ' // &
932	'curvature_solution_effects = .TRUE.'
933	CALL message( 'check_parameters', 'PA0349', 1, 2, 0, 6, 0 )
934	ENDIF
935
936	!
937	!-- Set LOGICAL switches to enhance performance
938	IF ( momentum_advec == 'ws-scheme' ) ws_scheme_mom = .TRUE.
939	IF ( scalar_advec == 'ws-scheme' .OR. &
940	scalar_advec == 'ws-scheme-mono' ) ws_scheme_sca = .TRUE.
941	IF ( scalar_advec == 'ws-scheme-mono' ) monotonic_adjustment = .TRUE.
942
943
944	!
945	!-- Timestep schemes:
946	SELECT CASE ( TRIM( timestep_scheme ) )
947
948	CASE ( 'euler' )
949	intermediate_timestep_count_max = 1
950
951	CASE ( 'runge-kutta-2' )
952	intermediate_timestep_count_max = 2
953
954	CASE ( 'runge-kutta-3' )
955	intermediate_timestep_count_max = 3
956
957	CASE DEFAULT
958	message_string = 'unknown timestep scheme: timestep_scheme = "' // &
959	TRIM( timestep_scheme ) // '"'
960	CALL message( 'check_parameters', 'PA0027', 1, 2, 0, 6, 0 )
961
962	END SELECT
963
964	IF ( (momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme') &
965	.AND. timestep_scheme(1:5) == 'runge' ) THEN
966	message_string = 'momentum advection scheme "' // &
967	TRIM( momentum_advec ) // '" & does not work with ' // &
968	'timestep_scheme "' // TRIM( timestep_scheme ) // '"'
969	CALL message( 'check_parameters', 'PA0029', 1, 2, 0, 6, 0 )
970	ENDIF
971
972	!
973	!-- Collision kernels:
974	SELECT CASE ( TRIM( collision_kernel ) )
975
976	CASE ( 'hall', 'hall_fast' )
977	hall_kernel = .TRUE.
978
979	CASE ( 'wang', 'wang_fast' )
980	wang_kernel = .TRUE.
981
982	CASE ( 'none' )
983
984
985	CASE DEFAULT
986	message_string = 'unknown collision kernel: collision_kernel = "' // &
987	TRIM( collision_kernel ) // '"'
988	CALL message( 'check_parameters', 'PA0350', 1, 2, 0, 6, 0 )
989
990	END SELECT
991	IF ( collision_kernel(6:9) == 'fast' ) use_kernel_tables = .TRUE.
992
993	!
994	!-- Collision algorithms:
995	SELECT CASE ( TRIM( collision_algorithm ) )
996
997	CASE ( 'all_or_nothing' )
998	all_or_nothing = .TRUE.
999
1000	CASE ( 'average_impact' )
1001	average_impact = .TRUE.
1002
1003	CASE DEFAULT
1004	message_string = 'unknown collision algorithm: collision_algorithm = "' // &
1005	TRIM( collision_algorithm ) // '"'
1006	CALL message( 'check_parameters', 'PA0420', 1, 2, 0, 6, 0 )
1007
1008	END SELECT
1009
1010	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
1011	TRIM( initializing_actions ) /= 'cyclic_fill' ) THEN
1012	!
1013	!-- No restart run: several initialising actions are possible
1014	action = initializing_actions
1015	DO WHILE ( TRIM( action ) /= '' )
1016	position = INDEX( action, ' ' )
1017	SELECT CASE ( action(1:position-1) )
1018
1019	CASE ( 'set_constant_profiles', 'set_1d-model_profiles', &
1020	'by_user', 'initialize_vortex', 'initialize_ptanom' )
1021	action = action(position+1:)
1022
1023	CASE DEFAULT
1024	message_string = 'initializing_action = "' // &
1025	TRIM( action ) // '" unkown or not allowed'
1026	CALL message( 'check_parameters', 'PA0030', 1, 2, 0, 6, 0 )
1027
1028	END SELECT
1029	ENDDO
1030	ENDIF
1031
1032	IF ( TRIM( initializing_actions ) == 'initialize_vortex' .AND. &
1033	conserve_volume_flow ) THEN
1034	message_string = 'initializing_actions = "initialize_vortex"' // &
1035	' ist not allowed with conserve_volume_flow = .T.'
1036	CALL message( 'check_parameters', 'PA0343', 1, 2, 0, 6, 0 )
1037	ENDIF
1038
1039
1040	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
1041	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
1042	message_string = 'initializing_actions = "set_constant_profiles"' // &
1043	' and "set_1d-model_profiles" are not allowed ' // &
1044	'simultaneously'
1045	CALL message( 'check_parameters', 'PA0031', 1, 2, 0, 6, 0 )
1046	ENDIF
1047
1048	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
1049	INDEX( initializing_actions, 'by_user' ) /= 0 ) THEN
1050	message_string = 'initializing_actions = "set_constant_profiles"' // &
1051	' and "by_user" are not allowed simultaneously'
1052	CALL message( 'check_parameters', 'PA0032', 1, 2, 0, 6, 0 )
1053	ENDIF
1054
1055	IF ( INDEX( initializing_actions, 'by_user' ) /= 0 .AND. &
1056	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
1057	message_string = 'initializing_actions = "by_user" and ' // &
1058	'"set_1d-model_profiles" are not allowed simultaneously'
1059	CALL message( 'check_parameters', 'PA0033', 1, 2, 0, 6, 0 )
1060	ENDIF
1061
1062	IF ( cloud_physics .AND. .NOT. humidity ) THEN
1063	WRITE( message_string, * ) 'cloud_physics = ', cloud_physics, ' is ', &
1064	'not allowed with humidity = ', humidity
1065	CALL message( 'check_parameters', 'PA0034', 1, 2, 0, 6, 0 )
1066	ENDIF
1067
1068	IF ( humidity .AND. sloping_surface ) THEN
1069	message_string = 'humidity = .TRUE. and sloping_surface = .TRUE. ' // &
1070	'are not allowed simultaneously'
1071	CALL message( 'check_parameters', 'PA0036', 1, 2, 0, 6, 0 )
1072	ENDIF
1073
1074	!
1075	!-- When plant canopy model is used, peform addtional checks
1076	IF ( plant_canopy ) CALL pcm_check_parameters
1077
1078	!
1079	!-- Additional checks for spectra
1080	IF ( calculate_spectra ) CALL spectra_check_parameters
1081	!
1082	!-- When land surface model is used, perform additional checks
1083	IF ( land_surface ) CALL lsm_check_parameters
1084
1085	!
1086	!-- If wind turbine model is used, perform additional checks
1087	IF ( wind_turbine ) CALL wtm_check_parameters
1088	!
1089	!-- When radiation model is used, peform addtional checks
1090	IF ( radiation ) CALL radiation_check_parameters
1091
1092
1093	IF ( .NOT. ( loop_optimization == 'cache' .OR. &
1094	loop_optimization == 'vector' ) &
1095	.AND. cloud_physics .AND. microphysics_seifert ) THEN
1096	message_string = 'cloud_scheme = seifert_beheng requires ' // &
1097	'loop_optimization = "cache" or "vector"'
1098	CALL message( 'check_parameters', 'PA0362', 1, 2, 0, 6, 0 )
1099	ENDIF
1100
1101	!
1102	!-- In case of no model continuation run, check initialising parameters and
1103	!-- deduce further quantities
1104	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
1105
1106	!
1107	!-- Initial profiles for 1D and 3D model, respectively (u,v further below)
1108	pt_init = pt_surface
1109	IF ( humidity ) q_init = q_surface
1110	IF ( ocean ) sa_init = sa_surface
1111	IF ( passive_scalar ) s_init = s_surface
1112
1113	!
1114	!--
1115	!-- If required, compute initial profile of the geostrophic wind
1116	!-- (component ug)
1117	i = 1
1118	gradient = 0.0_wp
1119
1120	IF ( .NOT. ocean ) THEN
1121
1122	ug_vertical_gradient_level_ind(1) = 0
1123	ug(0) = ug_surface
1124	DO k = 1, nzt+1
1125	IF ( i < 11 ) THEN
1126	IF ( ug_vertical_gradient_level(i) < zu(k) .AND. &
1127	ug_vertical_gradient_level(i) >= 0.0_wp ) THEN
1128	gradient = ug_vertical_gradient(i) / 100.0_wp
1129	ug_vertical_gradient_level_ind(i) = k - 1
1130	i = i + 1
1131	ENDIF
1132	ENDIF
1133	IF ( gradient /= 0.0_wp ) THEN
1134	IF ( k /= 1 ) THEN
1135	ug(k) = ug(k-1) + dzu(k) * gradient
1136	ELSE
1137	ug(k) = ug_surface + dzu(k) * gradient
1138	ENDIF
1139	ELSE
1140	ug(k) = ug(k-1)
1141	ENDIF
1142	ENDDO
1143
1144	ELSE
1145
1146	ug_vertical_gradient_level_ind(1) = nzt+1
1147	ug(nzt+1) = ug_surface
1148	DO k = nzt, nzb, -1
1149	IF ( i < 11 ) THEN
1150	IF ( ug_vertical_gradient_level(i) > zu(k) .AND. &
1151	ug_vertical_gradient_level(i) <= 0.0_wp ) THEN
1152	gradient = ug_vertical_gradient(i) / 100.0_wp
1153	ug_vertical_gradient_level_ind(i) = k + 1
1154	i = i + 1
1155	ENDIF
1156	ENDIF
1157	IF ( gradient /= 0.0_wp ) THEN
1158	IF ( k /= nzt ) THEN
1159	ug(k) = ug(k+1) - dzu(k+1) * gradient
1160	ELSE
1161	ug(k) = ug_surface - 0.5_wp * dzu(k+1) * gradient
1162	ug(k+1) = ug_surface + 0.5_wp * dzu(k+1) * gradient
1163	ENDIF
1164	ELSE
1165	ug(k) = ug(k+1)
1166	ENDIF
1167	ENDDO
1168
1169	ENDIF
1170
1171	!
1172	!-- In case of no given gradients for ug, choose a zero gradient
1173	IF ( ug_vertical_gradient_level(1) == -9999999.9_wp ) THEN
1174	ug_vertical_gradient_level(1) = 0.0_wp
1175	ENDIF
1176
1177	!
1178	!--
1179	!-- If required, compute initial profile of the geostrophic wind
1180	!-- (component vg)
1181	i = 1
1182	gradient = 0.0_wp
1183
1184	IF ( .NOT. ocean ) THEN
1185
1186	vg_vertical_gradient_level_ind(1) = 0
1187	vg(0) = vg_surface
1188	DO k = 1, nzt+1
1189	IF ( i < 11 ) THEN
1190	IF ( vg_vertical_gradient_level(i) < zu(k) .AND. &
1191	vg_vertical_gradient_level(i) >= 0.0_wp ) THEN
1192	gradient = vg_vertical_gradient(i) / 100.0_wp
1193	vg_vertical_gradient_level_ind(i) = k - 1
1194	i = i + 1
1195	ENDIF
1196	ENDIF
1197	IF ( gradient /= 0.0_wp ) THEN
1198	IF ( k /= 1 ) THEN
1199	vg(k) = vg(k-1) + dzu(k) * gradient
1200	ELSE
1201	vg(k) = vg_surface + dzu(k) * gradient
1202	ENDIF
1203	ELSE
1204	vg(k) = vg(k-1)
1205	ENDIF
1206	ENDDO
1207
1208	ELSE
1209
1210	vg_vertical_gradient_level_ind(1) = nzt+1
1211	vg(nzt+1) = vg_surface
1212	DO k = nzt, nzb, -1
1213	IF ( i < 11 ) THEN
1214	IF ( vg_vertical_gradient_level(i) > zu(k) .AND. &
1215	vg_vertical_gradient_level(i) <= 0.0_wp ) THEN
1216	gradient = vg_vertical_gradient(i) / 100.0_wp
1217	vg_vertical_gradient_level_ind(i) = k + 1
1218	i = i + 1
1219	ENDIF
1220	ENDIF
1221	IF ( gradient /= 0.0_wp ) THEN
1222	IF ( k /= nzt ) THEN
1223	vg(k) = vg(k+1) - dzu(k+1) * gradient
1224	ELSE
1225	vg(k) = vg_surface - 0.5_wp * dzu(k+1) * gradient
1226	vg(k+1) = vg_surface + 0.5_wp * dzu(k+1) * gradient
1227	ENDIF
1228	ELSE
1229	vg(k) = vg(k+1)
1230	ENDIF
1231	ENDDO
1232
1233	ENDIF
1234
1235	!
1236	!-- In case of no given gradients for vg, choose a zero gradient
1237	IF ( vg_vertical_gradient_level(1) == -9999999.9_wp ) THEN
1238	vg_vertical_gradient_level(1) = 0.0_wp
1239	ENDIF
1240
1241	!
1242	!-- Let the initial wind profiles be the calculated ug/vg profiles or
1243	!-- interpolate them from wind profile data (if given)
1244	IF ( u_profile(1) == 9999999.9_wp .AND. v_profile(1) == 9999999.9_wp ) THEN
1245
1246	u_init = ug
1247	v_init = vg
1248
1249	ELSEIF ( u_profile(1) == 0.0_wp .AND. v_profile(1) == 0.0_wp ) THEN
1250
1251	IF ( uv_heights(1) /= 0.0_wp ) THEN
1252	message_string = 'uv_heights(1) must be 0.0'
1253	CALL message( 'check_parameters', 'PA0345', 1, 2, 0, 6, 0 )
1254	ENDIF
1255
1256	use_prescribed_profile_data = .TRUE.
1257
1258	kk = 1
1259	u_init(0) = 0.0_wp
1260	v_init(0) = 0.0_wp
1261
1262	DO k = 1, nz+1
1263
1264	IF ( kk < 100 ) THEN
1265	DO WHILE ( uv_heights(kk+1) <= zu(k) )
1266	kk = kk + 1
1267	IF ( kk == 100 ) EXIT
1268	ENDDO
1269	ENDIF
1270
1271	IF ( kk < 100 .AND. uv_heights(kk+1) /= 9999999.9_wp ) THEN
1272	u_init(k) = u_profile(kk) + ( zu(k) - uv_heights(kk) ) / &
1273	( uv_heights(kk+1) - uv_heights(kk) ) * &
1274	( u_profile(kk+1) - u_profile(kk) )
1275	v_init(k) = v_profile(kk) + ( zu(k) - uv_heights(kk) ) / &
1276	( uv_heights(kk+1) - uv_heights(kk) ) * &
1277	( v_profile(kk+1) - v_profile(kk) )
1278	ELSE
1279	u_init(k) = u_profile(kk)
1280	v_init(k) = v_profile(kk)
1281	ENDIF
1282
1283	ENDDO
1284
1285	ELSE
1286
1287	message_string = 'u_profile(1) and v_profile(1) must be 0.0'
1288	CALL message( 'check_parameters', 'PA0346', 1, 2, 0, 6, 0 )
1289
1290	ENDIF
1291
1292	!
1293	!-- Compute initial temperature profile using the given temperature gradients
1294	IF ( .NOT. neutral ) THEN
1295	CALL init_vertical_profiles( pt_vertical_gradient_level_ind, &
1296	pt_vertical_gradient_level, &
1297	pt_vertical_gradient, pt_init, &
1298	pt_surface, bc_pt_t_val )
1299	ENDIF
1300	!
1301	!-- Compute initial humidity profile using the given humidity gradients
1302	IF ( humidity ) THEN
1303	CALL init_vertical_profiles( q_vertical_gradient_level_ind, &
1304	q_vertical_gradient_level, &
1305	q_vertical_gradient, q_init, &
1306	q_surface, bc_q_t_val )
1307	ENDIF
1308	!
1309	!-- Compute initial scalar profile using the given scalar gradients
1310	IF ( passive_scalar ) THEN
1311	CALL init_vertical_profiles( s_vertical_gradient_level_ind, &
1312	s_vertical_gradient_level, &
1313	s_vertical_gradient, s_init, &
1314	s_surface, bc_s_t_val )
1315	ENDIF
1316	!
1317	!-- If required, compute initial salinity profile using the given salinity
1318	!-- gradients
1319	IF ( ocean ) THEN
1320	CALL init_vertical_profiles( sa_vertical_gradient_level_ind, &
1321	sa_vertical_gradient_level, &
1322	sa_vertical_gradient, s_init, &
1323	sa_surface, -999.0_wp )
1324	ENDIF
1325
1326
1327	ENDIF
1328
1329	!
1330	!-- Check if the control parameter use_subsidence_tendencies is used correctly
1331	IF ( use_subsidence_tendencies .AND. .NOT. large_scale_subsidence ) THEN
1332	message_string = 'The usage of use_subsidence_tendencies ' // &
1333	'requires large_scale_subsidence = .T..'
1334	CALL message( 'check_parameters', 'PA0396', 1, 2, 0, 6, 0 )
1335	ELSEIF ( use_subsidence_tendencies .AND. .NOT. large_scale_forcing ) THEN
1336	message_string = 'The usage of use_subsidence_tendencies ' // &
1337	'requires large_scale_forcing = .T..'
1338	CALL message( 'check_parameters', 'PA0397', 1, 2, 0, 6, 0 )
1339	ENDIF
1340
1341	!
1342	!-- Initialize large scale subsidence if required
1343	If ( large_scale_subsidence ) THEN
1344	IF ( subs_vertical_gradient_level(1) /= -9999999.9_wp .AND. &
1345	.NOT. large_scale_forcing ) THEN
1346	CALL init_w_subsidence
1347	ENDIF
1348	!
1349	!-- In case large_scale_forcing is used, profiles for subsidence velocity
1350	!-- are read in from file LSF_DATA
1351
1352	IF ( subs_vertical_gradient_level(1) == -9999999.9_wp .AND. &
1353	.NOT. large_scale_forcing ) THEN
1354	message_string = 'There is no default large scale vertical ' // &
1355	'velocity profile set. Specify the subsidence ' // &
1356	'velocity profile via subs_vertical_gradient ' // &
1357	'and subs_vertical_gradient_level.'
1358	CALL message( 'check_parameters', 'PA0380', 1, 2, 0, 6, 0 )
1359	ENDIF
1360	ELSE
1361	IF ( subs_vertical_gradient_level(1) /= -9999999.9_wp ) THEN
1362	message_string = 'Enable usage of large scale subsidence by ' // &
1363	'setting large_scale_subsidence = .T..'
1364	CALL message( 'check_parameters', 'PA0381', 1, 2, 0, 6, 0 )
1365	ENDIF
1366	ENDIF
1367
1368	!
1369	!-- Compute Coriolis parameter
1370	f = 2.0_wp * omega * SIN( phi / 180.0_wp * pi )
1371	fs = 2.0_wp * omega * COS( phi / 180.0_wp * pi )
1372
1373	!
1374	!-- Check and set buoyancy related parameters and switches
1375	IF ( reference_state == 'horizontal_average' ) THEN
1376	CONTINUE
1377	ELSEIF ( reference_state == 'initial_profile' ) THEN
1378	use_initial_profile_as_reference = .TRUE.
1379	ELSEIF ( reference_state == 'single_value' ) THEN
1380	use_single_reference_value = .TRUE.
1381	IF ( pt_reference == 9999999.9_wp ) pt_reference = pt_surface
1382	vpt_reference = pt_reference * ( 1.0_wp + 0.61_wp * q_surface )
1383	ELSE
1384	message_string = 'illegal value for reference_state: "' // &
1385	TRIM( reference_state ) // '"'
1386	CALL message( 'check_parameters', 'PA0056', 1, 2, 0, 6, 0 )
1387	ENDIF
1388
1389	!
1390	!-- Sign of buoyancy/stability terms
1391	IF ( ocean ) atmos_ocean_sign = -1.0_wp
1392
1393	!
1394	!-- Ocean version must use flux boundary conditions at the top
1395	IF ( ocean .AND. .NOT. use_top_fluxes ) THEN
1396	message_string = 'use_top_fluxes must be .TRUE. in ocean mode'
1397	CALL message( 'check_parameters', 'PA0042', 1, 2, 0, 6, 0 )
1398	ENDIF
1399
1400	!
1401	!-- In case of a given slope, compute the relevant quantities
1402	IF ( alpha_surface /= 0.0_wp ) THEN
1403	IF ( ABS( alpha_surface ) > 90.0_wp ) THEN
1404	WRITE( message_string, * ) 'ABS( alpha_surface = ', alpha_surface, &
1405	' ) must be < 90.0'
1406	CALL message( 'check_parameters', 'PA0043', 1, 2, 0, 6, 0 )
1407	ENDIF
1408	sloping_surface = .TRUE.
1409	cos_alpha_surface = COS( alpha_surface / 180.0_wp * pi )
1410	sin_alpha_surface = SIN( alpha_surface / 180.0_wp * pi )
1411	ENDIF
1412
1413	!
1414	!-- Check time step and cfl_factor
1415	IF ( dt /= -1.0_wp ) THEN
1416	IF ( dt <= 0.0_wp .AND. dt /= -1.0_wp ) THEN
1417	WRITE( message_string, * ) 'dt = ', dt , ' <= 0.0'
1418	CALL message( 'check_parameters', 'PA0044', 1, 2, 0, 6, 0 )
1419	ENDIF
1420	dt_3d = dt
1421	dt_fixed = .TRUE.
1422	ENDIF
1423
1424	IF ( cfl_factor <= 0.0_wp .OR. cfl_factor > 1.0_wp ) THEN
1425	IF ( cfl_factor == -1.0_wp ) THEN
1426	IF ( timestep_scheme == 'runge-kutta-2' ) THEN
1427	cfl_factor = 0.8_wp
1428	ELSEIF ( timestep_scheme == 'runge-kutta-3' ) THEN
1429	cfl_factor = 0.9_wp
1430	ELSE
1431	cfl_factor = 0.9_wp
1432	ENDIF
1433	ELSE
1434	WRITE( message_string, * ) 'cfl_factor = ', cfl_factor, &
1435	' out of range & 0.0 < cfl_factor <= 1.0 is required'
1436	CALL message( 'check_parameters', 'PA0045', 1, 2, 0, 6, 0 )
1437	ENDIF
1438	ENDIF
1439
1440	!
1441	!-- Store simulated time at begin
1442	simulated_time_at_begin = simulated_time
1443
1444	!
1445	!-- Store reference time for coupled runs and change the coupling flag,
1446	!-- if ...
1447	IF ( simulated_time == 0.0_wp ) THEN
1448	IF ( coupling_start_time == 0.0_wp ) THEN
1449	time_since_reference_point = 0.0_wp
1450	ELSEIF ( time_since_reference_point < 0.0_wp ) THEN
1451	run_coupled = .FALSE.
1452	ENDIF
1453	ENDIF
1454
1455	!
1456	!-- Set wind speed in the Galilei-transformed system
1457	IF ( galilei_transformation ) THEN
1458	IF ( use_ug_for_galilei_tr .AND. &
1459	ug_vertical_gradient_level(1) == 0.0_wp .AND. &
1460	ug_vertical_gradient(1) == 0.0_wp .AND. &
1461	vg_vertical_gradient_level(1) == 0.0_wp .AND. &
1462	vg_vertical_gradient(1) == 0.0_wp ) THEN
1463	u_gtrans = ug_surface * 0.6_wp
1464	v_gtrans = vg_surface * 0.6_wp
1465	ELSEIF ( use_ug_for_galilei_tr .AND. &
1466	( ug_vertical_gradient_level(1) /= 0.0_wp .OR. &
1467	ug_vertical_gradient(1) /= 0.0_wp ) ) THEN
1468	message_string = 'baroclinity (ug) not allowed simultaneously' // &
1469	' with galilei transformation'
1470	CALL message( 'check_parameters', 'PA0046', 1, 2, 0, 6, 0 )
1471	ELSEIF ( use_ug_for_galilei_tr .AND. &
1472	( vg_vertical_gradient_level(1) /= 0.0_wp .OR. &
1473	vg_vertical_gradient(1) /= 0.0_wp ) ) THEN
1474	message_string = 'baroclinity (vg) not allowed simultaneously' // &
1475	' with galilei transformation'
1476	CALL message( 'check_parameters', 'PA0047', 1, 2, 0, 6, 0 )
1477	ELSE
1478	message_string = 'variable translation speed used for galilei-' // &
1479	'transformation, which may cause & instabilities in stably ' // &
1480	'stratified regions'
1481	CALL message( 'check_parameters', 'PA0048', 0, 1, 0, 6, 0 )
1482	ENDIF
1483	ENDIF
1484
1485	!
1486	!-- In case of using a prandtl-layer, calculated (or prescribed) surface
1487	!-- fluxes have to be used in the diffusion-terms
1488	IF ( constant_flux_layer ) use_surface_fluxes = .TRUE.
1489
1490	!
1491	!-- Check boundary conditions and set internal variables:
1492	!-- Attention: the lateral boundary conditions have been already checked in
1493	!-- parin
1494	!
1495	!-- Non-cyclic lateral boundaries require the multigrid method and Piascek-
1496	!-- Willimas or Wicker - Skamarock advection scheme. Several schemes
1497	!-- and tools do not work with non-cyclic boundary conditions.
1498	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
1499	IF ( psolver(1:9) /= 'multigrid' ) THEN
1500	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1501	'psolver = "' // TRIM( psolver ) // '"'
1502	CALL message( 'check_parameters', 'PA0051', 1, 2, 0, 6, 0 )
1503	ENDIF
1504	IF ( momentum_advec /= 'pw-scheme' .AND. &
1505	( momentum_advec /= 'ws-scheme' .AND. &
1506	momentum_advec /= 'ws-scheme-mono' ) &
1507	) THEN
1508
1509	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1510	'momentum_advec = "' // TRIM( momentum_advec ) // '"'
1511	CALL message( 'check_parameters', 'PA0052', 1, 2, 0, 6, 0 )
1512	ENDIF
1513	IF ( scalar_advec /= 'pw-scheme' .AND. &
1514	( scalar_advec /= 'ws-scheme' .AND. &
1515	scalar_advec /= 'ws-scheme-mono' ) &
1516	) THEN
1517	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1518	'scalar_advec = "' // TRIM( scalar_advec ) // '"'
1519	CALL message( 'check_parameters', 'PA0053', 1, 2, 0, 6, 0 )
1520	ENDIF
1521	IF ( galilei_transformation ) THEN
1522	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1523	'galilei_transformation = .T.'
1524	CALL message( 'check_parameters', 'PA0054', 1, 2, 0, 6, 0 )
1525	ENDIF
1526	ENDIF
1527
1528	!
1529	!-- Bottom boundary condition for the turbulent Kinetic energy
1530	IF ( bc_e_b == 'neumann' ) THEN
1531	ibc_e_b = 1
1532	ELSEIF ( bc_e_b == '(u)*2+neumann' ) THEN
1533	ibc_e_b = 2
1534	IF ( .NOT. constant_flux_layer ) THEN
1535	bc_e_b = 'neumann'
1536	ibc_e_b = 1
1537	message_string = 'boundary condition bc_e_b changed to "' // &
1538	TRIM( bc_e_b ) // '"'
1539	CALL message( 'check_parameters', 'PA0057', 0, 1, 0, 6, 0 )
1540	ENDIF
1541	ELSE
1542	message_string = 'unknown boundary condition: bc_e_b = "' // &
1543	TRIM( bc_e_b ) // '"'
1544	CALL message( 'check_parameters', 'PA0058', 1, 2, 0, 6, 0 )
1545	ENDIF
1546
1547	!
1548	!-- Boundary conditions for perturbation pressure
1549	IF ( bc_p_b == 'dirichlet' ) THEN
1550	ibc_p_b = 0
1551	ELSEIF ( bc_p_b == 'neumann' ) THEN
1552	ibc_p_b = 1
1553	ELSE
1554	message_string = 'unknown boundary condition: bc_p_b = "' // &
1555	TRIM( bc_p_b ) // '"'
1556	CALL message( 'check_parameters', 'PA0059', 1, 2, 0, 6, 0 )
1557	ENDIF
1558
1559	IF ( bc_p_t == 'dirichlet' ) THEN
1560	ibc_p_t = 0
1561	!-- TO_DO: later set bc_p_t to neumann before, in case of nested domain
1562	ELSEIF ( bc_p_t == 'neumann' .OR. bc_p_t == 'nested' ) THEN
1563	ibc_p_t = 1
1564	ELSE
1565	message_string = 'unknown boundary condition: bc_p_t = "' // &
1566	TRIM( bc_p_t ) // '"'
1567	CALL message( 'check_parameters', 'PA0061', 1, 2, 0, 6, 0 )
1568	ENDIF
1569
1570	!
1571	!-- Boundary conditions for potential temperature
1572	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
1573	ibc_pt_b = 2
1574	ELSE
1575	IF ( bc_pt_b == 'dirichlet' ) THEN
1576	ibc_pt_b = 0
1577	ELSEIF ( bc_pt_b == 'neumann' ) THEN
1578	ibc_pt_b = 1
1579	ELSE
1580	message_string = 'unknown boundary condition: bc_pt_b = "' // &
1581	TRIM( bc_pt_b ) // '"'
1582	CALL message( 'check_parameters', 'PA0062', 1, 2, 0, 6, 0 )
1583	ENDIF
1584	ENDIF
1585
1586	IF ( bc_pt_t == 'dirichlet' ) THEN
1587	ibc_pt_t = 0
1588	ELSEIF ( bc_pt_t == 'neumann' ) THEN
1589	ibc_pt_t = 1
1590	ELSEIF ( bc_pt_t == 'initial_gradient' ) THEN
1591	ibc_pt_t = 2
1592	ELSEIF ( bc_pt_t == 'nested' ) THEN
1593	ibc_pt_t = 3
1594	ELSE
1595	message_string = 'unknown boundary condition: bc_pt_t = "' // &
1596	TRIM( bc_pt_t ) // '"'
1597	CALL message( 'check_parameters', 'PA0063', 1, 2, 0, 6, 0 )
1598	ENDIF
1599
1600	IF ( surface_heatflux == 9999999.9_wp ) THEN
1601	constant_heatflux = .FALSE.
1602	IF ( large_scale_forcing .OR. land_surface ) THEN
1603	IF ( ibc_pt_b == 0 ) THEN
1604	constant_heatflux = .FALSE.
1605	ELSEIF ( ibc_pt_b == 1 ) THEN
1606	constant_heatflux = .TRUE.
1607	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
1608	.NOT. land_surface ) THEN
1609	surface_heatflux = shf_surf(1)
1610	ELSE
1611	surface_heatflux = 0.0_wp
1612	ENDIF
1613	ENDIF
1614	ENDIF
1615	ELSE
1616	constant_heatflux = .TRUE.
1617	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
1618	large_scale_forcing .AND. .NOT. land_surface ) THEN
1619	surface_heatflux = shf_surf(1)
1620	ENDIF
1621	ENDIF
1622
1623	IF ( top_heatflux == 9999999.9_wp ) constant_top_heatflux = .FALSE.
1624
1625	IF ( neutral ) THEN
1626
1627	IF ( surface_heatflux /= 0.0_wp .AND. &
1628	surface_heatflux /= 9999999.9_wp ) THEN
1629	message_string = 'heatflux must not be set for pure neutral flow'
1630	CALL message( 'check_parameters', 'PA0351', 1, 2, 0, 6, 0 )
1631	ENDIF
1632
1633	IF ( top_heatflux /= 0.0_wp .AND. top_heatflux /= 9999999.9_wp ) &
1634	THEN
1635	message_string = 'heatflux must not be set for pure neutral flow'
1636	CALL message( 'check_parameters', 'PA0351', 1, 2, 0, 6, 0 )
1637	ENDIF
1638
1639	ENDIF
1640
1641	IF ( top_momentumflux_u /= 9999999.9_wp .AND. &
1642	top_momentumflux_v /= 9999999.9_wp ) THEN
1643	constant_top_momentumflux = .TRUE.
1644	ELSEIF ( .NOT. ( top_momentumflux_u == 9999999.9_wp .AND. &
1645	top_momentumflux_v == 9999999.9_wp ) ) THEN
1646	message_string = 'both, top_momentumflux_u AND top_momentumflux_v ' // &
1647	'must be set'
1648	CALL message( 'check_parameters', 'PA0064', 1, 2, 0, 6, 0 )
1649	ENDIF
1650
1651	!
1652	!-- A given surface temperature implies Dirichlet boundary condition for
1653	!-- temperature. In this case specification of a constant heat flux is
1654	!-- forbidden.
1655	IF ( ibc_pt_b == 0 .AND. constant_heatflux .AND. &
1656	surface_heatflux /= 0.0_wp ) THEN
1657	message_string = 'boundary_condition: bc_pt_b = "' // TRIM( bc_pt_b ) //&
1658	'& is not allowed with constant_heatflux = .TRUE.'
1659	CALL message( 'check_parameters', 'PA0065', 1, 2, 0, 6, 0 )
1660	ENDIF
1661	IF ( constant_heatflux .AND. pt_surface_initial_change /= 0.0_wp ) THEN
1662	WRITE ( message_string, * ) 'constant_heatflux = .TRUE. is not allo', &
1663	'wed with pt_surface_initial_change (/=0) = ', &
1664	pt_surface_initial_change
1665	CALL message( 'check_parameters', 'PA0066', 1, 2, 0, 6, 0 )
1666	ENDIF
1667
1668	!
1669	!-- A given temperature at the top implies Dirichlet boundary condition for
1670	!-- temperature. In this case specification of a constant heat flux is
1671	!-- forbidden.
1672	IF ( ibc_pt_t == 0 .AND. constant_top_heatflux .AND. &
1673	top_heatflux /= 0.0_wp ) THEN
1674	message_string = 'boundary_condition: bc_pt_t = "' // TRIM( bc_pt_t ) //&
1675	'" is not allowed with constant_top_heatflux = .TRUE.'
1676	CALL message( 'check_parameters', 'PA0067', 1, 2, 0, 6, 0 )
1677	ENDIF
1678
1679	!
1680	!-- Boundary conditions for salinity
1681	IF ( ocean ) THEN
1682	IF ( bc_sa_t == 'dirichlet' ) THEN
1683	ibc_sa_t = 0
1684	ELSEIF ( bc_sa_t == 'neumann' ) THEN
1685	ibc_sa_t = 1
1686	ELSE
1687	message_string = 'unknown boundary condition: bc_sa_t = "' // &
1688	TRIM( bc_sa_t ) // '"'
1689	CALL message( 'check_parameters', 'PA0068', 1, 2, 0, 6, 0 )
1690	ENDIF
1691
1692	IF ( top_salinityflux == 9999999.9_wp ) constant_top_salinityflux = .FALSE.
1693	IF ( ibc_sa_t == 1 .AND. top_salinityflux == 9999999.9_wp ) THEN
1694	message_string = 'boundary condition: bc_sa_t = "' // &
1695	TRIM( bc_sa_t ) // '" requires to set ' // &
1696	'top_salinityflux'
1697	CALL message( 'check_parameters', 'PA0069', 1, 2, 0, 6, 0 )
1698	ENDIF
1699
1700	!
1701	!-- A fixed salinity at the top implies Dirichlet boundary condition for
1702	!-- salinity. In this case specification of a constant salinity flux is
1703	!-- forbidden.
1704	IF ( ibc_sa_t == 0 .AND. constant_top_salinityflux .AND. &
1705	top_salinityflux /= 0.0_wp ) THEN
1706	message_string = 'boundary condition: bc_sa_t = "' // &
1707	TRIM( bc_sa_t ) // '" is not allowed with ' // &
1708	'constant_top_salinityflux = .TRUE.'
1709	CALL message( 'check_parameters', 'PA0070', 1, 2, 0, 6, 0 )
1710	ENDIF
1711
1712	ENDIF
1713
1714	!
1715	!-- Set boundary conditions for total water content
1716	IF ( humidity ) THEN
1717	CALL set_bc_scalars( 'q', bc_q_b, bc_q_t, ibc_q_b, ibc_q_t, &
1718	'PA0071', 'PA0072' )
1719
1720	IF ( surface_waterflux == 9999999.9_wp ) THEN
1721	constant_waterflux = .FALSE.
1722	IF ( large_scale_forcing .OR. land_surface ) THEN
1723	IF ( ibc_q_b == 0 ) THEN
1724	constant_waterflux = .FALSE.
1725	ELSEIF ( ibc_q_b == 1 ) THEN
1726	constant_waterflux = .TRUE.
1727	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
1728	surface_waterflux = qsws_surf(1)
1729	ENDIF
1730	ENDIF
1731	ENDIF
1732	ELSE
1733	constant_waterflux = .TRUE.
1734	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
1735	large_scale_forcing ) THEN
1736	surface_waterflux = qsws_surf(1)
1737	ENDIF
1738	ENDIF
1739
1740	CALL check_bc_scalars( 'q', bc_q_b, ibc_q_b, 'PA0073', 'PA0074', &
1741	constant_waterflux, q_surface_initial_change )
1742
1743	ENDIF
1744
1745	IF ( passive_scalar ) THEN
1746	CALL set_bc_scalars( 's', bc_s_b, bc_s_t, ibc_s_b, ibc_s_t, &
1747	'PA0071', 'PA0072' )
1748
1749	CALL check_bc_scalars( 's', bc_s_b, ibc_s_b, 'PA0073', 'PA0074', &
1750	constant_scalarflux, s_surface_initial_change )
1751	ENDIF
1752	!
1753	!-- Boundary conditions for horizontal components of wind speed
1754	IF ( bc_uv_b == 'dirichlet' ) THEN
1755	ibc_uv_b = 0
1756	ELSEIF ( bc_uv_b == 'neumann' ) THEN
1757	ibc_uv_b = 1
1758	IF ( constant_flux_layer ) THEN
1759	message_string = 'boundary condition: bc_uv_b = "' // &
1760	TRIM( bc_uv_b ) // '" is not allowed with constant_flux_layer' &
1761	// ' = .TRUE.'
1762	CALL message( 'check_parameters', 'PA0075', 1, 2, 0, 6, 0 )
1763	ENDIF
1764	ELSE
1765	message_string = 'unknown boundary condition: bc_uv_b = "' // &
1766	TRIM( bc_uv_b ) // '"'
1767	CALL message( 'check_parameters', 'PA0076', 1, 2, 0, 6, 0 )
1768	ENDIF
1769	!
1770	!-- In case of coupled simulations u and v at the ground in atmosphere will be
1771	!-- assigned with the u and v values of the ocean surface
1772	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
1773	ibc_uv_b = 2
1774	ENDIF
1775
1776	IF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
1777	bc_uv_t = 'neumann'
1778	ibc_uv_t = 1
1779	ELSE
1780	IF ( bc_uv_t == 'dirichlet' .OR. bc_uv_t == 'dirichlet_0' ) THEN
1781	ibc_uv_t = 0
1782	IF ( bc_uv_t == 'dirichlet_0' ) THEN
1783	!
1784	!-- Velocities for the initial u,v-profiles are set zero at the top
1785	!-- in case of dirichlet_0 conditions
1786	u_init(nzt+1) = 0.0_wp
1787	v_init(nzt+1) = 0.0_wp
1788	ENDIF
1789	ELSEIF ( bc_uv_t == 'neumann' ) THEN
1790	ibc_uv_t = 1
1791	ELSEIF ( bc_uv_t == 'nested' ) THEN
1792	ibc_uv_t = 3
1793	ELSE
1794	message_string = 'unknown boundary condition: bc_uv_t = "' // &
1795	TRIM( bc_uv_t ) // '"'
1796	CALL message( 'check_parameters', 'PA0077', 1, 2, 0, 6, 0 )
1797	ENDIF
1798	ENDIF
1799
1800	!
1801	!-- Compute and check, respectively, the Rayleigh Damping parameter
1802	IF ( rayleigh_damping_factor == -1.0_wp ) THEN
1803	rayleigh_damping_factor = 0.0_wp
1804	ELSE
1805	IF ( rayleigh_damping_factor < 0.0_wp .OR. &
1806	rayleigh_damping_factor > 1.0_wp ) THEN
1807	WRITE( message_string, * ) 'rayleigh_damping_factor = ', &
1808	rayleigh_damping_factor, ' out of range [0.0,1.0]'
1809	CALL message( 'check_parameters', 'PA0078', 1, 2, 0, 6, 0 )
1810	ENDIF
1811	ENDIF
1812
1813	IF ( rayleigh_damping_height == -1.0_wp ) THEN
1814	IF ( .NOT. ocean ) THEN
1815	rayleigh_damping_height = 0.66666666666_wp * zu(nzt)
1816	ELSE
1817	rayleigh_damping_height = 0.66666666666_wp * zu(nzb)
1818	ENDIF
1819	ELSE
1820	IF ( .NOT. ocean ) THEN
1821	IF ( rayleigh_damping_height < 0.0_wp .OR. &
1822	rayleigh_damping_height > zu(nzt) ) THEN
1823	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
1824	rayleigh_damping_height, ' out of range [0.0,', zu(nzt), ']'
1825	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
1826	ENDIF
1827	ELSE
1828	IF ( rayleigh_damping_height > 0.0_wp .OR. &
1829	rayleigh_damping_height < zu(nzb) ) THEN
1830	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
1831	rayleigh_damping_height, ' out of range [0.0,', zu(nzb), ']'
1832	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
1833	ENDIF
1834	ENDIF
1835	ENDIF
1836
1837	!
1838	!-- Check number of chosen statistic regions. More than 10 regions are not
1839	!-- allowed, because so far no more than 10 corresponding output files can
1840	!-- be opened (cf. check_open)
1841	IF ( statistic_regions > 9 .OR. statistic_regions < 0 ) THEN
1842	WRITE ( message_string, * ) 'number of statistic_regions = ', &
1843	statistic_regions+1, ' but only 10 regions are allowed'
1844	CALL message( 'check_parameters', 'PA0082', 1, 2, 0, 6, 0 )
1845	ENDIF
1846	IF ( normalizing_region > statistic_regions .OR. &
1847	normalizing_region < 0) THEN
1848	WRITE ( message_string, * ) 'normalizing_region = ', &
1849	normalizing_region, ' must be >= 0 and <= ',statistic_regions, &
1850	' (value of statistic_regions)'
1851	CALL message( 'check_parameters', 'PA0083', 1, 2, 0, 6, 0 )
1852	ENDIF
1853
1854	!
1855	!-- Set the default intervals for data output, if necessary
1856	!-- NOTE: dt_dosp has already been set in spectra_parin
1857	IF ( dt_data_output /= 9999999.9_wp ) THEN
1858	IF ( dt_dopr == 9999999.9_wp ) dt_dopr = dt_data_output
1859	IF ( dt_dopts == 9999999.9_wp ) dt_dopts = dt_data_output
1860	IF ( dt_do2d_xy == 9999999.9_wp ) dt_do2d_xy = dt_data_output
1861	IF ( dt_do2d_xz == 9999999.9_wp ) dt_do2d_xz = dt_data_output
1862	IF ( dt_do2d_yz == 9999999.9_wp ) dt_do2d_yz = dt_data_output
1863	IF ( dt_do3d == 9999999.9_wp ) dt_do3d = dt_data_output
1864	IF ( dt_data_output_av == 9999999.9_wp ) dt_data_output_av = dt_data_output
1865	DO mid = 1, max_masks
1866	IF ( dt_domask(mid) == 9999999.9_wp ) dt_domask(mid) = dt_data_output
1867	ENDDO
1868	ENDIF
1869
1870	!
1871	!-- Set the default skip time intervals for data output, if necessary
1872	IF ( skip_time_dopr == 9999999.9_wp ) &
1873	skip_time_dopr = skip_time_data_output
1874	IF ( skip_time_do2d_xy == 9999999.9_wp ) &
1875	skip_time_do2d_xy = skip_time_data_output
1876	IF ( skip_time_do2d_xz == 9999999.9_wp ) &
1877	skip_time_do2d_xz = skip_time_data_output
1878	IF ( skip_time_do2d_yz == 9999999.9_wp ) &
1879	skip_time_do2d_yz = skip_time_data_output
1880	IF ( skip_time_do3d == 9999999.9_wp ) &
1881	skip_time_do3d = skip_time_data_output
1882	IF ( skip_time_data_output_av == 9999999.9_wp ) &
1883	skip_time_data_output_av = skip_time_data_output
1884	DO mid = 1, max_masks
1885	IF ( skip_time_domask(mid) == 9999999.9_wp ) &
1886	skip_time_domask(mid) = skip_time_data_output
1887	ENDDO
1888
1889	!
1890	!-- Check the average intervals (first for 3d-data, then for profiles)
1891	IF ( averaging_interval > dt_data_output_av ) THEN
1892	WRITE( message_string, * ) 'averaging_interval = ', &
1893	averaging_interval, ' must be <= dt_data_output = ', dt_data_output
1894	CALL message( 'check_parameters', 'PA0085', 1, 2, 0, 6, 0 )
1895	ENDIF
1896
1897	IF ( averaging_interval_pr == 9999999.9_wp ) THEN
1898	averaging_interval_pr = averaging_interval
1899	ENDIF
1900
1901	IF ( averaging_interval_pr > dt_dopr ) THEN
1902	WRITE( message_string, * ) 'averaging_interval_pr = ', &
1903	averaging_interval_pr, ' must be <= dt_dopr = ', dt_dopr
1904	CALL message( 'check_parameters', 'PA0086', 1, 2, 0, 6, 0 )
1905	ENDIF
1906
1907	!
1908	!-- Set the default interval for profiles entering the temporal average
1909	IF ( dt_averaging_input_pr == 9999999.9_wp ) THEN
1910	dt_averaging_input_pr = dt_averaging_input
1911	ENDIF
1912
1913	!
1914	!-- Set the default interval for the output of timeseries to a reasonable
1915	!-- value (tries to minimize the number of calls of flow_statistics)
1916	IF ( dt_dots == 9999999.9_wp ) THEN
1917	IF ( averaging_interval_pr == 0.0_wp ) THEN
1918	dt_dots = MIN( dt_run_control, dt_dopr )
1919	ELSE
1920	dt_dots = MIN( dt_run_control, dt_averaging_input_pr )
1921	ENDIF
1922	ENDIF
1923
1924	!
1925	!-- Check the sample rate for averaging (first for 3d-data, then for profiles)
1926	IF ( dt_averaging_input > averaging_interval ) THEN
1927	WRITE( message_string, * ) 'dt_averaging_input = ', &
1928	dt_averaging_input, ' must be <= averaging_interval = ', &
1929	averaging_interval
1930	CALL message( 'check_parameters', 'PA0088', 1, 2, 0, 6, 0 )
1931	ENDIF
1932
1933	IF ( dt_averaging_input_pr > averaging_interval_pr ) THEN
1934	WRITE( message_string, * ) 'dt_averaging_input_pr = ', &
1935	dt_averaging_input_pr, ' must be <= averaging_interval_pr = ', &
1936	averaging_interval_pr
1937	CALL message( 'check_parameters', 'PA0089', 1, 2, 0, 6, 0 )
1938	ENDIF
1939
1940	!
1941	!-- Set the default value for the integration interval of precipitation amount
1942	IF ( microphysics_seifert .OR. microphysics_kessler ) THEN
1943	IF ( precipitation_amount_interval == 9999999.9_wp ) THEN
1944	precipitation_amount_interval = dt_do2d_xy
1945	ELSE
1946	IF ( precipitation_amount_interval > dt_do2d_xy ) THEN
1947	WRITE( message_string, * ) 'precipitation_amount_interval = ', &
1948	precipitation_amount_interval, ' must not be larger than ', &
1949	'dt_do2d_xy = ', dt_do2d_xy
1950	CALL message( 'check_parameters', 'PA0090', 1, 2, 0, 6, 0 )
1951	ENDIF
1952	ENDIF
1953	ENDIF
1954
1955	!
1956	!-- Determine the number of output profiles and check whether they are
1957	!-- permissible
1958	DO WHILE ( data_output_pr(dopr_n+1) /= ' ' )
1959
1960	dopr_n = dopr_n + 1
1961	i = dopr_n
1962
1963	!
1964	!-- Determine internal profile number (for hom, homs)
1965	!-- and store height levels
1966	SELECT CASE ( TRIM( data_output_pr(i) ) )
1967
1968	CASE ( 'u', '#u' )
1969	dopr_index(i) = 1
1970	dopr_unit(i) = 'm/s'
1971	hom(:,2,1,:) = SPREAD( zu, 2, statistic_regions+1 )
1972	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1973	dopr_initial_index(i) = 5
1974	hom(:,2,5,:) = SPREAD( zu, 2, statistic_regions+1 )
1975	data_output_pr(i) = data_output_pr(i)(2:)
1976	ENDIF
1977
1978	CASE ( 'v', '#v' )
1979	dopr_index(i) = 2
1980	dopr_unit(i) = 'm/s'
1981	hom(:,2,2,:) = SPREAD( zu, 2, statistic_regions+1 )
1982	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1983	dopr_initial_index(i) = 6
1984	hom(:,2,6,:) = SPREAD( zu, 2, statistic_regions+1 )
1985	data_output_pr(i) = data_output_pr(i)(2:)
1986	ENDIF
1987
1988	CASE ( 'w' )
1989	dopr_index(i) = 3
1990	dopr_unit(i) = 'm/s'
1991	hom(:,2,3,:) = SPREAD( zw, 2, statistic_regions+1 )
1992
1993	CASE ( 'pt', '#pt' )
1994	IF ( .NOT. cloud_physics ) THEN
1995	dopr_index(i) = 4
1996	dopr_unit(i) = 'K'
1997	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
1998	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1999	dopr_initial_index(i) = 7
2000	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
2001	hom(nzb,2,7,:) = 0.0_wp ! because zu(nzb) is negative
2002	data_output_pr(i) = data_output_pr(i)(2:)
2003	ENDIF
2004	ELSE
2005	dopr_index(i) = 43
2006	dopr_unit(i) = 'K'
2007	hom(:,2,43,:) = SPREAD( zu, 2, statistic_regions+1 )
2008	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2009	dopr_initial_index(i) = 28
2010	hom(:,2,28,:) = SPREAD( zu, 2, statistic_regions+1 )
2011	hom(nzb,2,28,:) = 0.0_wp ! because zu(nzb) is negative
2012	data_output_pr(i) = data_output_pr(i)(2:)
2013	ENDIF
2014	ENDIF
2015
2016	CASE ( 'e' )
2017	dopr_index(i) = 8
2018	dopr_unit(i) = 'm2/s2'
2019	hom(:,2,8,:) = SPREAD( zu, 2, statistic_regions+1 )
2020	hom(nzb,2,8,:) = 0.0_wp
2021
2022	CASE ( 'km', '#km' )
2023	dopr_index(i) = 9
2024	dopr_unit(i) = 'm2/s'
2025	hom(:,2,9,:) = SPREAD( zu, 2, statistic_regions+1 )
2026	hom(nzb,2,9,:) = 0.0_wp
2027	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2028	dopr_initial_index(i) = 23
2029	hom(:,2,23,:) = hom(:,2,9,:)
2030	data_output_pr(i) = data_output_pr(i)(2:)
2031	ENDIF
2032
2033	CASE ( 'kh', '#kh' )
2034	dopr_index(i) = 10
2035	dopr_unit(i) = 'm2/s'
2036	hom(:,2,10,:) = SPREAD( zu, 2, statistic_regions+1 )
2037	hom(nzb,2,10,:) = 0.0_wp
2038	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2039	dopr_initial_index(i) = 24
2040	hom(:,2,24,:) = hom(:,2,10,:)
2041	data_output_pr(i) = data_output_pr(i)(2:)
2042	ENDIF
2043
2044	CASE ( 'l', '#l' )
2045	dopr_index(i) = 11
2046	dopr_unit(i) = 'm'
2047	hom(:,2,11,:) = SPREAD( zu, 2, statistic_regions+1 )
2048	hom(nzb,2,11,:) = 0.0_wp
2049	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2050	dopr_initial_index(i) = 25
2051	hom(:,2,25,:) = hom(:,2,11,:)
2052	data_output_pr(i) = data_output_pr(i)(2:)
2053	ENDIF
2054
2055	CASE ( 'w"u"' )
2056	dopr_index(i) = 12
2057	dopr_unit(i) = 'm2/s2'
2058	hom(:,2,12,:) = SPREAD( zw, 2, statistic_regions+1 )
2059	IF ( constant_flux_layer ) hom(nzb,2,12,:) = zu(1)
2060
2061	CASE ( 'wu' )
2062	dopr_index(i) = 13
2063	dopr_unit(i) = 'm2/s2'
2064	hom(:,2,13,:) = SPREAD( zw, 2, statistic_regions+1 )
2065
2066	CASE ( 'w"v"' )
2067	dopr_index(i) = 14
2068	dopr_unit(i) = 'm2/s2'
2069	hom(:,2,14,:) = SPREAD( zw, 2, statistic_regions+1 )
2070	IF ( constant_flux_layer ) hom(nzb,2,14,:) = zu(1)
2071
2072	CASE ( 'wv' )
2073	dopr_index(i) = 15
2074	dopr_unit(i) = 'm2/s2'
2075	hom(:,2,15,:) = SPREAD( zw, 2, statistic_regions+1 )
2076
2077	CASE ( 'w"pt"' )
2078	dopr_index(i) = 16
2079	dopr_unit(i) = 'K m/s'
2080	hom(:,2,16,:) = SPREAD( zw, 2, statistic_regions+1 )
2081
2082	CASE ( 'wpt' )
2083	dopr_index(i) = 17
2084	dopr_unit(i) = 'K m/s'
2085	hom(:,2,17,:) = SPREAD( zw, 2, statistic_regions+1 )
2086
2087	CASE ( 'wpt' )
2088	dopr_index(i) = 18
2089	dopr_unit(i) = 'K m/s'
2090	hom(:,2,18,:) = SPREAD( zw, 2, statistic_regions+1 )
2091
2092	CASE ( 'wu' )
2093	dopr_index(i) = 19
2094	dopr_unit(i) = 'm2/s2'
2095	hom(:,2,19,:) = SPREAD( zw, 2, statistic_regions+1 )
2096	IF ( constant_flux_layer ) hom(nzb,2,19,:) = zu(1)
2097
2098	CASE ( 'wv' )
2099	dopr_index(i) = 20
2100	dopr_unit(i) = 'm2/s2'
2101	hom(:,2,20,:) = SPREAD( zw, 2, statistic_regions+1 )
2102	IF ( constant_flux_layer ) hom(nzb,2,20,:) = zu(1)
2103
2104	CASE ( 'wptBC' )
2105	dopr_index(i) = 21
2106	dopr_unit(i) = 'K m/s'
2107	hom(:,2,21,:) = SPREAD( zw, 2, statistic_regions+1 )
2108
2109	CASE ( 'wptBC' )
2110	dopr_index(i) = 22
2111	dopr_unit(i) = 'K m/s'
2112	hom(:,2,22,:) = SPREAD( zw, 2, statistic_regions+1 )
2113
2114	CASE ( 'sa', '#sa' )
2115	IF ( .NOT. ocean ) THEN
2116	message_string = 'data_output_pr = ' // &
2117	TRIM( data_output_pr(i) ) // ' is not imp' // &
2118	'lemented for ocean = .FALSE.'
2119	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2120	ELSE
2121	dopr_index(i) = 23
2122	dopr_unit(i) = 'psu'
2123	hom(:,2,23,:) = SPREAD( zu, 2, statistic_regions+1 )
2124	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2125	dopr_initial_index(i) = 26
2126	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2127	hom(nzb,2,26,:) = 0.0_wp ! because zu(nzb) is negative
2128	data_output_pr(i) = data_output_pr(i)(2:)
2129	ENDIF
2130	ENDIF
2131
2132	CASE ( 'u*2' )
2133	dopr_index(i) = 30
2134	dopr_unit(i) = 'm2/s2'
2135	hom(:,2,30,:) = SPREAD( zu, 2, statistic_regions+1 )
2136
2137	CASE ( 'v*2' )
2138	dopr_index(i) = 31
2139	dopr_unit(i) = 'm2/s2'
2140	hom(:,2,31,:) = SPREAD( zu, 2, statistic_regions+1 )
2141
2142	CASE ( 'w*2' )
2143	dopr_index(i) = 32
2144	dopr_unit(i) = 'm2/s2'
2145	hom(:,2,32,:) = SPREAD( zw, 2, statistic_regions+1 )
2146
2147	CASE ( 'pt*2' )
2148	dopr_index(i) = 33
2149	dopr_unit(i) = 'K2'
2150	hom(:,2,33,:) = SPREAD( zu, 2, statistic_regions+1 )
2151
2152	CASE ( 'e*' )
2153	dopr_index(i) = 34
2154	dopr_unit(i) = 'm2/s2'
2155	hom(:,2,34,:) = SPREAD( zu, 2, statistic_regions+1 )
2156
2157	CASE ( 'w2pt' )
2158	dopr_index(i) = 35
2159	dopr_unit(i) = 'K m2/s2'
2160	hom(:,2,35,:) = SPREAD( zw, 2, statistic_regions+1 )
2161
2162	CASE ( 'wpt2' )
2163	dopr_index(i) = 36
2164	dopr_unit(i) = 'K2 m/s'
2165	hom(:,2,36,:) = SPREAD( zw, 2, statistic_regions+1 )
2166
2167	CASE ( 'we' )
2168	dopr_index(i) = 37
2169	dopr_unit(i) = 'm3/s3'
2170	hom(:,2,37,:) = SPREAD( zw, 2, statistic_regions+1 )
2171
2172	CASE ( 'w*3' )
2173	dopr_index(i) = 38
2174	dopr_unit(i) = 'm3/s3'
2175	hom(:,2,38,:) = SPREAD( zw, 2, statistic_regions+1 )
2176
2177	CASE ( 'Sw' )
2178	dopr_index(i) = 39
2179	dopr_unit(i) = 'none'
2180	hom(:,2,39,:) = SPREAD( zw, 2, statistic_regions+1 )
2181
2182	CASE ( 'p' )
2183	dopr_index(i) = 40
2184	dopr_unit(i) = 'Pa'
2185	hom(:,2,40,:) = SPREAD( zu, 2, statistic_regions+1 )
2186
2187	CASE ( 'q', '#q' )
2188	IF ( .NOT. humidity ) THEN
2189	message_string = 'data_output_pr = ' // &
2190	TRIM( data_output_pr(i) ) // ' is not imp' // &
2191	'lemented for humidity = .FALSE.'
2192	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2193	ELSE
2194	dopr_index(i) = 41
2195	dopr_unit(i) = 'kg/kg'
2196	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
2197	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2198	dopr_initial_index(i) = 26
2199	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2200	hom(nzb,2,26,:) = 0.0_wp ! because zu(nzb) is negative
2201	data_output_pr(i) = data_output_pr(i)(2:)
2202	ENDIF
2203	ENDIF
2204
2205	CASE ( 's', '#s' )
2206	IF ( .NOT. passive_scalar ) THEN
2207	message_string = 'data_output_pr = ' // &
2208	TRIM( data_output_pr(i) ) // ' is not imp' // &
2209	'lemented for passive_scalar = .FALSE.'
2210	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2211	ELSE
2212	dopr_index(i) = 41
2213	dopr_unit(i) = 'kg/m3'
2214	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
2215	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2216	dopr_initial_index(i) = 26
2217	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2218	hom(nzb,2,26,:) = 0.0_wp ! because zu(nzb) is negative
2219	data_output_pr(i) = data_output_pr(i)(2:)
2220	ENDIF
2221	ENDIF
2222
2223	CASE ( 'qv', '#qv' )
2224	IF ( .NOT. cloud_physics ) THEN
2225	dopr_index(i) = 41
2226	dopr_unit(i) = 'kg/kg'
2227	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
2228	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2229	dopr_initial_index(i) = 26
2230	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2231	hom(nzb,2,26,:) = 0.0_wp ! because zu(nzb) is negative
2232	data_output_pr(i) = data_output_pr(i)(2:)
2233	ENDIF
2234	ELSE
2235	dopr_index(i) = 42
2236	dopr_unit(i) = 'kg/kg'
2237	hom(:,2,42,:) = SPREAD( zu, 2, statistic_regions+1 )
2238	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2239	dopr_initial_index(i) = 27
2240	hom(:,2,27,:) = SPREAD( zu, 2, statistic_regions+1 )
2241	hom(nzb,2,27,:) = 0.0_wp ! because zu(nzb) is negative
2242	data_output_pr(i) = data_output_pr(i)(2:)
2243	ENDIF
2244	ENDIF
2245
2246	CASE ( 'lpt', '#lpt' )
2247	IF ( .NOT. cloud_physics ) THEN
2248	message_string = 'data_output_pr = ' // &
2249	TRIM( data_output_pr(i) ) // ' is not imp' // &
2250	'lemented for cloud_physics = .FALSE.'
2251	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2252	ELSE
2253	dopr_index(i) = 4
2254	dopr_unit(i) = 'K'
2255	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
2256	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2257	dopr_initial_index(i) = 7
2258	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
2259	hom(nzb,2,7,:) = 0.0_wp ! because zu(nzb) is negative
2260	data_output_pr(i) = data_output_pr(i)(2:)
2261	ENDIF
2262	ENDIF
2263
2264	CASE ( 'vpt', '#vpt' )
2265	dopr_index(i) = 44
2266	dopr_unit(i) = 'K'
2267	hom(:,2,44,:) = SPREAD( zu, 2, statistic_regions+1 )
2268	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2269	dopr_initial_index(i) = 29
2270	hom(:,2,29,:) = SPREAD( zu, 2, statistic_regions+1 )
2271	hom(nzb,2,29,:) = 0.0_wp ! because zu(nzb) is negative
2272	data_output_pr(i) = data_output_pr(i)(2:)
2273	ENDIF
2274
2275	CASE ( 'w"vpt"' )
2276	dopr_index(i) = 45
2277	dopr_unit(i) = 'K m/s'
2278	hom(:,2,45,:) = SPREAD( zw, 2, statistic_regions+1 )
2279
2280	CASE ( 'wvpt' )
2281	dopr_index(i) = 46
2282	dopr_unit(i) = 'K m/s'
2283	hom(:,2,46,:) = SPREAD( zw, 2, statistic_regions+1 )
2284
2285	CASE ( 'wvpt' )
2286	dopr_index(i) = 47
2287	dopr_unit(i) = 'K m/s'
2288	hom(:,2,47,:) = SPREAD( zw, 2, statistic_regions+1 )
2289
2290	CASE ( 'w"q"' )
2291	IF ( .NOT. humidity ) THEN
2292	message_string = 'data_output_pr = ' // &
2293	TRIM( data_output_pr(i) ) // ' is not imp' // &
2294	'lemented for humidity = .FALSE.'
2295	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2296	ELSE
2297	dopr_index(i) = 48
2298	dopr_unit(i) = 'kg/kg m/s'
2299	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2300	ENDIF
2301
2302	CASE ( 'wq' )
2303	IF ( .NOT. humidity ) THEN
2304	message_string = 'data_output_pr = ' // &
2305	TRIM( data_output_pr(i) ) // ' is not imp' // &
2306	'lemented for humidity = .FALSE.'
2307	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2308	ELSE
2309	dopr_index(i) = 49
2310	dopr_unit(i) = 'kg/kg m/s'
2311	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2312	ENDIF
2313
2314	CASE ( 'wq' )
2315	IF ( .NOT. humidity ) THEN
2316	message_string = 'data_output_pr = ' // &
2317	TRIM( data_output_pr(i) ) // ' is not imp' // &
2318	'lemented for humidity = .FALSE.'
2319	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2320	ELSE
2321	dopr_index(i) = 50
2322	dopr_unit(i) = 'kg/kg m/s'
2323	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2324	ENDIF
2325
2326	CASE ( 'w"s"' )
2327	IF ( .NOT. passive_scalar ) THEN
2328	message_string = 'data_output_pr = ' // &
2329	TRIM( data_output_pr(i) ) // ' is not imp' // &
2330	'lemented for passive_scalar = .FALSE.'
2331	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2332	ELSE
2333	dopr_index(i) = 48
2334	dopr_unit(i) = 'kg/m3 m/s'
2335	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2336	ENDIF
2337
2338	CASE ( 'ws' )
2339	IF ( .NOT. passive_scalar ) THEN
2340	message_string = 'data_output_pr = ' // &
2341	TRIM( data_output_pr(i) ) // ' is not imp' // &
2342	'lemented for passive_scalar = .FALSE.'
2343	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2344	ELSE
2345	dopr_index(i) = 49
2346	dopr_unit(i) = 'kg/m3 m/s'
2347	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2348	ENDIF
2349
2350	CASE ( 'ws' )
2351	IF ( .NOT. passive_scalar ) THEN
2352	message_string = 'data_output_pr = ' // &
2353	TRIM( data_output_pr(i) ) // ' is not imp' // &
2354	'lemented for passive_scalar = .FALSE.'
2355	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2356	ELSE
2357	dopr_index(i) = 50
2358	dopr_unit(i) = 'kg/m3 m/s'
2359	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2360	ENDIF
2361
2362	CASE ( 'w"qv"' )
2363	IF ( humidity .AND. .NOT. cloud_physics ) THEN
2364	dopr_index(i) = 48
2365	dopr_unit(i) = 'kg/kg m/s'
2366	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2367	ELSEIF ( humidity .AND. cloud_physics ) THEN
2368	dopr_index(i) = 51
2369	dopr_unit(i) = 'kg/kg m/s'
2370	hom(:,2,51,:) = SPREAD( zw, 2, statistic_regions+1 )
2371	ELSE
2372	message_string = 'data_output_pr = ' // &
2373	TRIM( data_output_pr(i) ) // ' is not imp' // &
2374	'lemented for cloud_physics = .FALSE. an&' // &
2375	'd humidity = .FALSE.'
2376	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2377	ENDIF
2378
2379	CASE ( 'wqv' )
2380	IF ( humidity .AND. .NOT. cloud_physics ) &
2381	THEN
2382	dopr_index(i) = 49
2383	dopr_unit(i) = 'kg/kg m/s'
2384	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2385	ELSEIF( humidity .AND. cloud_physics ) THEN
2386	dopr_index(i) = 52
2387	dopr_unit(i) = 'kg/kg m/s'
2388	hom(:,2,52,:) = SPREAD( zw, 2, statistic_regions+1 )
2389	ELSE
2390	message_string = 'data_output_pr = ' // &
2391	TRIM( data_output_pr(i) ) // ' is not imp' // &
2392	'lemented for cloud_physics = .FALSE. an&' // &
2393	'd humidity = .FALSE.'
2394	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2395	ENDIF
2396
2397	CASE ( 'wqv' )
2398	IF ( humidity .AND. .NOT. cloud_physics ) THEN
2399	dopr_index(i) = 50
2400	dopr_unit(i) = 'kg/kg m/s'
2401	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2402	ELSEIF ( humidity .AND. cloud_physics ) THEN
2403	dopr_index(i) = 53
2404	dopr_unit(i) = 'kg/kg m/s'
2405	hom(:,2,53,:) = SPREAD( zw, 2, statistic_regions+1 )
2406	ELSE
2407	message_string = 'data_output_pr = ' // &
2408	TRIM( data_output_pr(i) ) // ' is not imp' // &
2409	'lemented for cloud_physics = .FALSE. an&' // &
2410	'd humidity = .FALSE.'
2411	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2412	ENDIF
2413
2414	CASE ( 'ql' )
2415	IF ( .NOT. cloud_physics .AND. .NOT. cloud_droplets ) THEN
2416	message_string = 'data_output_pr = ' // &
2417	TRIM( data_output_pr(i) ) // ' is not imp' // &
2418	'lemented for cloud_physics = .FALSE. or' // &
2419	'&cloud_droplets = .FALSE.'
2420	CALL message( 'check_parameters', 'PA0096', 1, 2, 0, 6, 0 )
2421	ELSE
2422	dopr_index(i) = 54
2423	dopr_unit(i) = 'kg/kg'
2424	hom(:,2,54,:) = SPREAD( zu, 2, statistic_regions+1 )
2425	ENDIF
2426
2427	CASE ( 'wuu*:dz' )
2428	dopr_index(i) = 55
2429	dopr_unit(i) = 'm2/s3'
2430	hom(:,2,55,:) = SPREAD( zu, 2, statistic_regions+1 )
2431
2432	CASE ( 'wp:dz' )
2433	dopr_index(i) = 56
2434	dopr_unit(i) = 'm2/s3'
2435	hom(:,2,56,:) = SPREAD( zw, 2, statistic_regions+1 )
2436
2437	CASE ( 'w"e:dz' )
2438	dopr_index(i) = 57
2439	dopr_unit(i) = 'm2/s3'
2440	hom(:,2,57,:) = SPREAD( zu, 2, statistic_regions+1 )
2441
2442
2443	CASE ( 'u"pt"' )
2444	dopr_index(i) = 58
2445	dopr_unit(i) = 'K m/s'
2446	hom(:,2,58,:) = SPREAD( zu, 2, statistic_regions+1 )
2447
2448	CASE ( 'upt' )
2449	dopr_index(i) = 59
2450	dopr_unit(i) = 'K m/s'
2451	hom(:,2,59,:) = SPREAD( zu, 2, statistic_regions+1 )
2452
2453	CASE ( 'upt_t' )
2454	dopr_index(i) = 60
2455	dopr_unit(i) = 'K m/s'
2456	hom(:,2,60,:) = SPREAD( zu, 2, statistic_regions+1 )
2457
2458	CASE ( 'v"pt"' )
2459	dopr_index(i) = 61
2460	dopr_unit(i) = 'K m/s'
2461	hom(:,2,61,:) = SPREAD( zu, 2, statistic_regions+1 )
2462
2463	CASE ( 'vpt' )
2464	dopr_index(i) = 62
2465	dopr_unit(i) = 'K m/s'
2466	hom(:,2,62,:) = SPREAD( zu, 2, statistic_regions+1 )
2467
2468	CASE ( 'vpt_t' )
2469	dopr_index(i) = 63
2470	dopr_unit(i) = 'K m/s'
2471	hom(:,2,63,:) = SPREAD( zu, 2, statistic_regions+1 )
2472
2473	CASE ( 'rho' )
2474	IF ( .NOT. ocean ) THEN
2475	message_string = 'data_output_pr = ' // &
2476	TRIM( data_output_pr(i) ) // ' is not imp' // &
2477	'lemented for ocean = .FALSE.'
2478	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2479	ELSE
2480	dopr_index(i) = 64
2481	dopr_unit(i) = 'kg/m3'
2482	hom(:,2,64,:) = SPREAD( zu, 2, statistic_regions+1 )
2483	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2484	dopr_initial_index(i) = 77
2485	hom(:,2,77,:) = SPREAD( zu, 2, statistic_regions+1 )
2486	hom(nzb,2,77,:) = 0.0_wp ! because zu(nzb) is negative
2487	data_output_pr(i) = data_output_pr(i)(2:)
2488	ENDIF
2489	ENDIF
2490
2491	CASE ( 'w"sa"' )
2492	IF ( .NOT. ocean ) THEN
2493	message_string = 'data_output_pr = ' // &
2494	TRIM( data_output_pr(i) ) // ' is not imp' // &
2495	'lemented for ocean = .FALSE.'
2496	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2497	ELSE
2498	dopr_index(i) = 65
2499	dopr_unit(i) = 'psu m/s'
2500	hom(:,2,65,:) = SPREAD( zw, 2, statistic_regions+1 )
2501	ENDIF
2502
2503	CASE ( 'wsa' )
2504	IF ( .NOT. ocean ) THEN
2505	message_string = 'data_output_pr = ' // &
2506	TRIM( data_output_pr(i) ) // ' is not imp' // &
2507	'lemented for ocean = .FALSE.'
2508	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2509	ELSE
2510	dopr_index(i) = 66
2511	dopr_unit(i) = 'psu m/s'
2512	hom(:,2,66,:) = SPREAD( zw, 2, statistic_regions+1 )
2513	ENDIF
2514
2515	CASE ( 'wsa' )
2516	IF ( .NOT. ocean ) THEN
2517	message_string = 'data_output_pr = ' // &
2518	TRIM( data_output_pr(i) ) // ' is not imp' // &
2519	'lemented for ocean = .FALSE.'
2520	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2521	ELSE
2522	dopr_index(i) = 67
2523	dopr_unit(i) = 'psu m/s'
2524	hom(:,2,67,:) = SPREAD( zw, 2, statistic_regions+1 )
2525	ENDIF
2526
2527	CASE ( 'wp' )
2528	dopr_index(i) = 68
2529	dopr_unit(i) = 'm3/s3'
2530	hom(:,2,68,:) = SPREAD( zu, 2, statistic_regions+1 )
2531
2532	CASE ( 'w"e' )
2533	dopr_index(i) = 69
2534	dopr_unit(i) = 'm3/s3'
2535	hom(:,2,69,:) = SPREAD( zu, 2, statistic_regions+1 )
2536
2537	CASE ( 'q*2' )
2538	IF ( .NOT. humidity ) THEN
2539	message_string = 'data_output_pr = ' // &
2540	TRIM( data_output_pr(i) ) // ' is not imp' // &
2541	'lemented for humidity = .FALSE.'
2542	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2543	ELSE
2544	dopr_index(i) = 70
2545	dopr_unit(i) = 'kg2/kg2'
2546	hom(:,2,70,:) = SPREAD( zu, 2, statistic_regions+1 )
2547	ENDIF
2548
2549	CASE ( 'prho' )
2550	IF ( .NOT. ocean ) THEN
2551	message_string = 'data_output_pr = ' // &
2552	TRIM( data_output_pr(i) ) // ' is not imp' // &
2553	'lemented for ocean = .FALSE.'
2554	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2555	ELSE
2556	dopr_index(i) = 71
2557	dopr_unit(i) = 'kg/m3'
2558	hom(:,2,71,:) = SPREAD( zu, 2, statistic_regions+1 )
2559	ENDIF
2560
2561	CASE ( 'hyp' )
2562	dopr_index(i) = 72
2563	dopr_unit(i) = 'dbar'
2564	hom(:,2,72,:) = SPREAD( zu, 2, statistic_regions+1 )
2565
2566	CASE ( 'nr' )
2567	IF ( .NOT. cloud_physics ) THEN
2568	message_string = 'data_output_pr = ' // &
2569	TRIM( data_output_pr(i) ) // ' is not imp' // &
2570	'lemented for cloud_physics = .FALSE.'
2571	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2572	ELSEIF ( .NOT. microphysics_seifert ) THEN
2573	message_string = 'data_output_pr = ' // &
2574	TRIM( data_output_pr(i) ) // ' is not imp' // &
2575	'lemented for cloud_scheme /= seifert_beheng'
2576	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
2577	ELSE
2578	dopr_index(i) = 73
2579	dopr_unit(i) = '1/m3'
2580	hom(:,2,73,:) = SPREAD( zu, 2, statistic_regions+1 )
2581	ENDIF
2582
2583	CASE ( 'qr' )
2584	IF ( .NOT. cloud_physics ) THEN
2585	message_string = 'data_output_pr = ' // &
2586	TRIM( data_output_pr(i) ) // ' is not imp' // &
2587	'lemented for cloud_physics = .FALSE.'
2588	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2589	ELSEIF ( .NOT. microphysics_seifert ) THEN
2590	message_string = 'data_output_pr = ' // &
2591	TRIM( data_output_pr(i) ) // ' is not imp' // &
2592	'lemented for cloud_scheme /= seifert_beheng'
2593	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
2594	ELSE
2595	dopr_index(i) = 74
2596	dopr_unit(i) = 'kg/kg'
2597	hom(:,2,74,:) = SPREAD( zu, 2, statistic_regions+1 )
2598	ENDIF
2599
2600	CASE ( 'qc' )
2601	IF ( .NOT. cloud_physics ) THEN
2602	message_string = 'data_output_pr = ' // &
2603	TRIM( data_output_pr(i) ) // ' is not imp' // &
2604	'lemented for cloud_physics = .FALSE.'
2605	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2606	ELSE
2607	dopr_index(i) = 75
2608	dopr_unit(i) = 'kg/kg'
2609	hom(:,2,75,:) = SPREAD( zu, 2, statistic_regions+1 )
2610	ENDIF
2611
2612	CASE ( 'prr' )
2613	IF ( .NOT. cloud_physics ) THEN
2614	message_string = 'data_output_pr = ' // &
2615	TRIM( data_output_pr(i) ) // ' is not imp' // &
2616	'lemented for cloud_physics = .FALSE.'
2617	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2618	ELSEIF ( microphysics_sat_adjust ) THEN
2619	message_string = 'data_output_pr = ' // &
2620	TRIM( data_output_pr(i) ) // ' is not ava' // &
2621	'ilable for cloud_scheme = saturation_adjust'
2622	CALL message( 'check_parameters', 'PA0422', 1, 2, 0, 6, 0 )
2623	ELSE
2624	dopr_index(i) = 76
2625	dopr_unit(i) = 'kg/kg m/s'
2626	hom(:,2,76,:) = SPREAD( zu, 2, statistic_regions+1 )
2627	ENDIF
2628
2629	CASE ( 'ug' )
2630	dopr_index(i) = 78
2631	dopr_unit(i) = 'm/s'
2632	hom(:,2,78,:) = SPREAD( zu, 2, statistic_regions+1 )
2633
2634	CASE ( 'vg' )
2635	dopr_index(i) = 79
2636	dopr_unit(i) = 'm/s'
2637	hom(:,2,79,:) = SPREAD( zu, 2, statistic_regions+1 )
2638
2639	CASE ( 'w_subs' )
2640	IF ( .NOT. large_scale_subsidence ) THEN
2641	message_string = 'data_output_pr = ' // &
2642	TRIM( data_output_pr(i) ) // ' is not imp' // &
2643	'lemented for large_scale_subsidence = .FALSE.'
2644	CALL message( 'check_parameters', 'PA0382', 1, 2, 0, 6, 0 )
2645	ELSE
2646	dopr_index(i) = 80
2647	dopr_unit(i) = 'm/s'
2648	hom(:,2,80,:) = SPREAD( zu, 2, statistic_regions+1 )
2649	ENDIF
2650
2651	CASE ( 'td_lsa_lpt' )
2652	IF ( .NOT. large_scale_forcing ) THEN
2653	message_string = 'data_output_pr = ' // &
2654	TRIM( data_output_pr(i) ) // ' is not imp' // &
2655	'lemented for large_scale_forcing = .FALSE.'
2656	CALL message( 'check_parameters', 'PA0393', 1, 2, 0, 6, 0 )
2657	ELSE
2658	dopr_index(i) = 81
2659	dopr_unit(i) = 'K/s'
2660	hom(:,2,81,:) = SPREAD( zu, 2, statistic_regions+1 )
2661	ENDIF
2662
2663	CASE ( 'td_lsa_q' )
2664	IF ( .NOT. large_scale_forcing ) THEN
2665	message_string = 'data_output_pr = ' // &
2666	TRIM( data_output_pr(i) ) // ' is not imp' // &
2667	'lemented for large_scale_forcing = .FALSE.'
2668	CALL message( 'check_parameters', 'PA0393', 1, 2, 0, 6, 0 )
2669	ELSE
2670	dopr_index(i) = 82
2671	dopr_unit(i) = 'kg/kgs'
2672	hom(:,2,82,:) = SPREAD( zu, 2, statistic_regions+1 )
2673	ENDIF
2674
2675	CASE ( 'td_sub_lpt' )
2676	IF ( .NOT. large_scale_forcing ) THEN
2677	message_string = 'data_output_pr = ' // &
2678	TRIM( data_output_pr(i) ) // ' is not imp' // &
2679	'lemented for large_scale_forcing = .FALSE.'
2680	CALL message( 'check_parameters', 'PA0393', 1, 2, 0, 6, 0 )
2681	ELSE
2682	dopr_index(i) = 83
2683	dopr_unit(i) = 'K/s'
2684	hom(:,2,83,:) = SPREAD( zu, 2, statistic_regions+1 )
2685	ENDIF
2686
2687	CASE ( 'td_sub_q' )
2688	IF ( .NOT. large_scale_forcing ) THEN
2689	message_string = 'data_output_pr = ' // &
2690	TRIM( data_output_pr(i) ) // ' is not imp' // &
2691	'lemented for large_scale_forcing = .FALSE.'
2692	CALL message( 'check_parameters', 'PA0393', 1, 2, 0, 6, 0 )
2693	ELSE
2694	dopr_index(i) = 84
2695	dopr_unit(i) = 'kg/kgs'
2696	hom(:,2,84,:) = SPREAD( zu, 2, statistic_regions+1 )
2697	ENDIF
2698
2699	CASE ( 'td_nud_lpt' )
2700	IF ( .NOT. nudging ) THEN
2701	message_string = 'data_output_pr = ' // &
2702	TRIM( data_output_pr(i) ) // ' is not imp' // &
2703	'lemented for nudging = .FALSE.'
2704	CALL message( 'check_parameters', 'PA0394', 1, 2, 0, 6, 0 )
2705	ELSE
2706	dopr_index(i) = 85
2707	dopr_unit(i) = 'K/s'
2708	hom(:,2,85,:) = SPREAD( zu, 2, statistic_regions+1 )
2709	ENDIF
2710
2711	CASE ( 'td_nud_q' )
2712	IF ( .NOT. nudging ) THEN
2713	message_string = 'data_output_pr = ' // &
2714	TRIM( data_output_pr(i) ) // ' is not imp' // &
2715	'lemented for nudging = .FALSE.'
2716	CALL message( 'check_parameters', 'PA0394', 1, 2, 0, 6, 0 )
2717	ELSE
2718	dopr_index(i) = 86
2719	dopr_unit(i) = 'kg/kgs'
2720	hom(:,2,86,:) = SPREAD( zu, 2, statistic_regions+1 )
2721	ENDIF
2722
2723	CASE ( 'td_nud_u' )
2724	IF ( .NOT. nudging ) THEN
2725	message_string = 'data_output_pr = ' // &
2726	TRIM( data_output_pr(i) ) // ' is not imp' // &
2727	'lemented for nudging = .FALSE.'
2728	CALL message( 'check_parameters', 'PA0394', 1, 2, 0, 6, 0 )
2729	ELSE
2730	dopr_index(i) = 87
2731	dopr_unit(i) = 'm/s2'
2732	hom(:,2,87,:) = SPREAD( zu, 2, statistic_regions+1 )
2733	ENDIF
2734
2735	CASE ( 'td_nud_v' )
2736	IF ( .NOT. nudging ) THEN
2737	message_string = 'data_output_pr = ' // &
2738	TRIM( data_output_pr(i) ) // ' is not imp' // &
2739	'lemented for nudging = .FALSE.'
2740	CALL message( 'check_parameters', 'PA0394', 1, 2, 0, 6, 0 )
2741	ELSE
2742	dopr_index(i) = 88
2743	dopr_unit(i) = 'm/s2'
2744	hom(:,2,88,:) = SPREAD( zu, 2, statistic_regions+1 )
2745	ENDIF
2746
2747
2748
2749	CASE DEFAULT
2750
2751	CALL lsm_check_data_output_pr( data_output_pr(i), i, unit, &
2752	dopr_unit(i) )
2753
2754	IF ( unit == 'illegal' ) THEN
2755	CALL radiation_check_data_output_pr( data_output_pr(i), i, &
2756	unit, dopr_unit(i) )
2757	ENDIF
2758
2759	IF ( unit == 'illegal' ) THEN
2760	unit = ''
2761	CALL user_check_data_output_pr( data_output_pr(i), i, unit )
2762	ENDIF
2763
2764	IF ( unit == 'illegal' ) THEN
2765	IF ( data_output_pr_user(1) /= ' ' ) THEN
2766	message_string = 'illegal value for data_output_pr or ' // &
2767	'data_output_pr_user = "' // &
2768	TRIM( data_output_pr(i) ) // '"'
2769	CALL message( 'check_parameters', 'PA0097', 1, 2, 0, 6, 0 )
2770	ELSE
2771	message_string = 'illegal value for data_output_pr = "' // &
2772	TRIM( data_output_pr(i) ) // '"'
2773	CALL message( 'check_parameters', 'PA0098', 1, 2, 0, 6, 0 )
2774	ENDIF
2775	ENDIF
2776
2777	END SELECT
2778
2779	ENDDO
2780
2781
2782	!
2783	!-- Append user-defined data output variables to the standard data output
2784	IF ( data_output_user(1) /= ' ' ) THEN
2785	i = 1
2786	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
2787	i = i + 1
2788	ENDDO
2789	j = 1
2790	DO WHILE ( data_output_user(j) /= ' ' .AND. j <= 100 )
2791	IF ( i > 100 ) THEN
2792	message_string = 'number of output quantitities given by data' // &
2793	'_output and data_output_user exceeds the limit of 100'
2794	CALL message( 'check_parameters', 'PA0102', 1, 2, 0, 6, 0 )
2795	ENDIF
2796	data_output(i) = data_output_user(j)
2797	i = i + 1
2798	j = j + 1
2799	ENDDO
2800	ENDIF
2801
2802	!
2803	!-- Check and set steering parameters for 2d/3d data output and averaging
2804	i = 1
2805	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
2806	!
2807	!-- Check for data averaging
2808	ilen = LEN_TRIM( data_output(i) )
2809	j = 0 ! no data averaging
2810	IF ( ilen > 3 ) THEN
2811	IF ( data_output(i)(ilen-2:ilen) == '_av' ) THEN
2812	j = 1 ! data averaging
2813	data_output(i) = data_output(i)(1:ilen-3)
2814	ENDIF
2815	ENDIF
2816	!
2817	!-- Check for cross section or volume data
2818	ilen = LEN_TRIM( data_output(i) )
2819	k = 0 ! 3d data
2820	var = data_output(i)(1:ilen)
2821	IF ( ilen > 3 ) THEN
2822	IF ( data_output(i)(ilen-2:ilen) == '_xy' .OR. &
2823	data_output(i)(ilen-2:ilen) == '_xz' .OR. &
2824	data_output(i)(ilen-2:ilen) == '_yz' ) THEN
2825	k = 1 ! 2d data
2826	var = data_output(i)(1:ilen-3)
2827	ENDIF
2828	ENDIF
2829
2830	!
2831	!-- Check for allowed value and set units
2832	SELECT CASE ( TRIM( var ) )
2833
2834	CASE ( 'e' )
2835	IF ( constant_diffusion ) THEN
2836	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2837	'res constant_diffusion = .FALSE.'
2838	CALL message( 'check_parameters', 'PA0103', 1, 2, 0, 6, 0 )
2839	ENDIF
2840	unit = 'm2/s2'
2841
2842	CASE ( 'lpt' )
2843	IF ( .NOT. cloud_physics ) THEN
2844	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2845	'res cloud_physics = .TRUE.'
2846	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2847	ENDIF
2848	unit = 'K'
2849
2850	CASE ( 'nr' )
2851	IF ( .NOT. cloud_physics ) THEN
2852	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2853	'res cloud_physics = .TRUE.'
2854	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2855	ELSEIF ( .NOT. microphysics_seifert ) THEN
2856	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2857	'res cloud_scheme = seifert_beheng'
2858	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
2859	ENDIF
2860	unit = '1/m3'
2861
2862	CASE ( 'pc', 'pr' )
2863	IF ( .NOT. particle_advection ) THEN
2864	message_string = 'output of "' // TRIM( var ) // '" requir' // &
2865	'es a "particles_par"-NAMELIST in the parameter file (PARIN)'
2866	CALL message( 'check_parameters', 'PA0104', 1, 2, 0, 6, 0 )
2867	ENDIF
2868	IF ( TRIM( var ) == 'pc' ) unit = 'number'
2869	IF ( TRIM( var ) == 'pr' ) unit = 'm'
2870
2871	CASE ( 'prr' )
2872	IF ( .NOT. cloud_physics ) THEN
2873	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2874	'res cloud_physics = .TRUE.'
2875	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2876	ELSEIF ( microphysics_sat_adjust ) THEN
2877	message_string = 'output of "' // TRIM( var ) // '" is ' // &
2878	'not available for cloud_scheme = saturation_adjust'
2879	CALL message( 'check_parameters', 'PA0423', 1, 2, 0, 6, 0 )
2880	ENDIF
2881	unit = 'kg/kg m/s'
2882
2883	CASE ( 'q', 'vpt' )
2884	IF ( .NOT. humidity ) THEN
2885	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2886	'res humidity = .TRUE.'
2887	CALL message( 'check_parameters', 'PA0105', 1, 2, 0, 6, 0 )
2888	ENDIF
2889	IF ( TRIM( var ) == 'q' ) unit = 'kg/kg'
2890	IF ( TRIM( var ) == 'vpt' ) unit = 'K'
2891
2892	CASE ( 'qc' )
2893	IF ( .NOT. cloud_physics ) THEN
2894	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2895	'res cloud_physics = .TRUE.'
2896	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2897	ENDIF
2898	unit = 'kg/kg'
2899
2900	CASE ( 'ql' )
2901	IF ( .NOT. ( cloud_physics .OR. cloud_droplets ) ) THEN
2902	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2903	'res cloud_physics = .TRUE. or cloud_droplets = .TRUE.'
2904	CALL message( 'check_parameters', 'PA0106', 1, 2, 0, 6, 0 )
2905	ENDIF
2906	unit = 'kg/kg'
2907
2908	CASE ( 'ql_c', 'ql_v', 'ql_vp' )
2909	IF ( .NOT. cloud_droplets ) THEN
2910	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2911	'res cloud_droplets = .TRUE.'
2912	CALL message( 'check_parameters', 'PA0107', 1, 2, 0, 6, 0 )
2913	ENDIF
2914	IF ( TRIM( var ) == 'ql_c' ) unit = 'kg/kg'
2915	IF ( TRIM( var ) == 'ql_v' ) unit = 'm3'
2916	IF ( TRIM( var ) == 'ql_vp' ) unit = 'none'
2917
2918	CASE ( 'qr' )
2919	IF ( .NOT. cloud_physics ) THEN
2920	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2921	'res cloud_physics = .TRUE.'
2922	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2923	ELSEIF ( .NOT. microphysics_seifert ) THEN
2924	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2925	'res cloud_scheme = seifert_beheng'
2926	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
2927	ENDIF
2928	unit = 'kg/kg'
2929
2930	CASE ( 'qv' )
2931	IF ( .NOT. cloud_physics ) THEN
2932	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2933	'res cloud_physics = .TRUE.'
2934	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2935	ENDIF
2936	unit = 'kg/kg'
2937
2938	CASE ( 'rho' )
2939	IF ( .NOT. ocean ) THEN
2940	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2941	'res ocean = .TRUE.'
2942	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
2943	ENDIF
2944	unit = 'kg/m3'
2945
2946	CASE ( 's' )
2947	IF ( .NOT. passive_scalar ) THEN
2948	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2949	'res passive_scalar = .TRUE.'
2950	CALL message( 'check_parameters', 'PA0110', 1, 2, 0, 6, 0 )
2951	ENDIF
2952	unit = 'conc'
2953
2954	CASE ( 'sa' )
2955	IF ( .NOT. ocean ) THEN
2956	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2957	'res ocean = .TRUE.'
2958	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
2959	ENDIF
2960	unit = 'psu'
2961
2962	CASE ( 'p', 'pt', 'u', 'v', 'w' )
2963	IF ( TRIM( var ) == 'p' ) unit = 'Pa'
2964	IF ( TRIM( var ) == 'pt' ) unit = 'K'
2965	IF ( TRIM( var ) == 'u' ) unit = 'm/s'
2966	IF ( TRIM( var ) == 'v' ) unit = 'm/s'
2967	IF ( TRIM( var ) == 'w' ) unit = 'm/s'
2968	CONTINUE
2969
2970	CASE ( 'lwp', 'ol', 'pra', 'prr', 'qsws', 'shf', 't*', &
2971	'u', 'z0', 'z0h', 'z0q' )
2972	IF ( k == 0 .OR. data_output(i)(ilen-2:ilen) /= '_xy' ) THEN
2973	message_string = 'illegal value for data_output: "' // &
2974	TRIM( var ) // '" & only 2d-horizontal ' // &
2975	'cross sections are allowed for this value'
2976	CALL message( 'check_parameters', 'PA0111', 1, 2, 0, 6, 0 )
2977	ENDIF
2978
2979	IF ( TRIM( var ) == 'lwp*' .AND. .NOT. cloud_physics ) THEN
2980	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2981	'res cloud_physics = .TRUE.'
2982	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2983	ENDIF
2984	IF ( TRIM( var ) == 'pra*' .AND. &
2985	.NOT. ( microphysics_kessler .OR. microphysics_seifert ) ) THEN
2986	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2987	'res cloud_scheme = kessler or seifert_beheng'
2988	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2989	ENDIF
2990	IF ( TRIM( var ) == 'pra*' .AND. j == 1 ) THEN
2991	message_string = 'temporal averaging of precipitation ' // &
2992	'amount "' // TRIM( var ) // '" is not possible'
2993	CALL message( 'check_parameters', 'PA0113', 1, 2, 0, 6, 0 )
2994	ENDIF
2995	IF ( TRIM( var ) == 'prr*' .AND. &
2996	.NOT. ( microphysics_kessler .OR. microphysics_seifert ) ) THEN
2997	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2998	'res cloud_scheme = kessler or seifert_beheng'
2999	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
3000	ENDIF
3001	IF ( TRIM( var ) == 'qsws*' .AND. .NOT. humidity ) THEN
3002	message_string = 'output of "' // TRIM( var ) // '" requi' // &
3003	'res humidity = .TRUE.'
3004	CALL message( 'check_parameters', 'PA0322', 1, 2, 0, 6, 0 )
3005	ENDIF
3006
3007	IF ( TRIM( var ) == 'lwp*' ) unit = 'kg/m2'
3008	IF ( TRIM( var ) == 'ol*' ) unit = 'm'
3009	IF ( TRIM( var ) == 'pra*' ) unit = 'mm'
3010	IF ( TRIM( var ) == 'prr*' ) unit = 'mm/s'
3011	IF ( TRIM( var ) == 'qsws*' ) unit = 'kgm/kgs'
3012	IF ( TRIM( var ) == 'shf' ) unit = 'Km/s'
3013	IF ( TRIM( var ) == 't*' ) unit = 'K'
3014	IF ( TRIM( var ) == 'u*' ) unit = 'm/s'
3015	IF ( TRIM( var ) == 'z0*' ) unit = 'm'
3016	IF ( TRIM( var ) == 'z0h*' ) unit = 'm'
3017
3018	CASE DEFAULT
3019
3020	CALL lsm_check_data_output ( var, unit, i, ilen, k )
3021
3022	IF ( unit == 'illegal' ) THEN
3023	CALL radiation_check_data_output( var, unit, i, ilen, k )
3024	ENDIF
3025
3026	IF ( unit == 'illegal' ) THEN
3027	unit = ''
3028	CALL user_check_data_output( var, unit )
3029	ENDIF
3030
3031	IF ( unit == 'illegal' ) THEN
3032	IF ( data_output_user(1) /= ' ' ) THEN
3033	message_string = 'illegal value for data_output or ' // &
3034	'data_output_user = "' // TRIM( data_output(i) ) // '"'
3035	CALL message( 'check_parameters', 'PA0114', 1, 2, 0, 6, 0 )
3036	ELSE
3037	message_string = 'illegal value for data_output = "' // &
3038	TRIM( data_output(i) ) // '"'
3039	CALL message( 'check_parameters', 'PA0115', 1, 2, 0, 6, 0 )
3040	ENDIF
3041	ENDIF
3042
3043	END SELECT
3044	!
3045	!-- Set the internal steering parameters appropriately
3046	IF ( k == 0 ) THEN
3047	do3d_no(j) = do3d_no(j) + 1
3048	do3d(j,do3d_no(j)) = data_output(i)
3049	do3d_unit(j,do3d_no(j)) = unit
3050	ELSE
3051	do2d_no(j) = do2d_no(j) + 1
3052	do2d(j,do2d_no(j)) = data_output(i)
3053	do2d_unit(j,do2d_no(j)) = unit
3054	IF ( data_output(i)(ilen-2:ilen) == '_xy' ) THEN
3055	data_output_xy(j) = .TRUE.
3056	ENDIF
3057	IF ( data_output(i)(ilen-2:ilen) == '_xz' ) THEN
3058	data_output_xz(j) = .TRUE.
3059	ENDIF
3060	IF ( data_output(i)(ilen-2:ilen) == '_yz' ) THEN
3061	data_output_yz(j) = .TRUE.
3062	ENDIF
3063	ENDIF
3064
3065	IF ( j == 1 ) THEN
3066	!
3067	!-- Check, if variable is already subject to averaging
3068	found = .FALSE.
3069	DO k = 1, doav_n
3070	IF ( TRIM( doav(k) ) == TRIM( var ) ) found = .TRUE.
3071	ENDDO
3072
3073	IF ( .NOT. found ) THEN
3074	doav_n = doav_n + 1
3075	doav(doav_n) = var
3076	ENDIF
3077	ENDIF
3078
3079	i = i + 1
3080	ENDDO
3081
3082	!
3083	!-- Averaged 2d or 3d output requires that an averaging interval has been set
3084	IF ( doav_n > 0 .AND. averaging_interval == 0.0_wp ) THEN
3085	WRITE( message_string, * ) 'output of averaged quantity "', &
3086	TRIM( doav(1) ), '_av" requires to set a ', &
3087	'non-zero & averaging interval'
3088	CALL message( 'check_parameters', 'PA0323', 1, 2, 0, 6, 0 )
3089	ENDIF
3090
3091	!
3092	!-- Check sectional planes and store them in one shared array
3093	IF ( ANY( section_xy > nz + 1 ) ) THEN
3094	WRITE( message_string, * ) 'section_xy must be <= nz + 1 = ', nz + 1
3095	CALL message( 'check_parameters', 'PA0319', 1, 2, 0, 6, 0 )
3096	ENDIF
3097	IF ( ANY( section_xz > ny + 1 ) ) THEN
3098	WRITE( message_string, * ) 'section_xz must be <= ny + 1 = ', ny + 1
3099	CALL message( 'check_parameters', 'PA0320', 1, 2, 0, 6, 0 )
3100	ENDIF
3101	IF ( ANY( section_yz > nx + 1 ) ) THEN
3102	WRITE( message_string, * ) 'section_yz must be <= nx + 1 = ', nx + 1
3103	CALL message( 'check_parameters', 'PA0321', 1, 2, 0, 6, 0 )
3104	ENDIF
3105	section(:,1) = section_xy
3106	section(:,2) = section_xz
3107	section(:,3) = section_yz
3108
3109	!
3110	!-- Upper plot limit for 2D vertical sections
3111	IF ( z_max_do2d == -1.0_wp ) z_max_do2d = zu(nzt)
3112	IF ( z_max_do2d < zu(nzb+1) .OR. z_max_do2d > zu(nzt) ) THEN
3113	WRITE( message_string, * ) 'z_max_do2d = ', z_max_do2d, &
3114	' must be >= ', zu(nzb+1), '(zu(nzb+1)) and <= ', zu(nzt), &
3115	' (zu(nzt))'
3116	CALL message( 'check_parameters', 'PA0116', 1, 2, 0, 6, 0 )
3117	ENDIF
3118
3119	!
3120	!-- Upper plot limit for 3D arrays
3121	IF ( nz_do3d == -9999 ) nz_do3d = nzt + 1
3122
3123	!
3124	!-- Set output format string (used in header)
3125	SELECT CASE ( netcdf_data_format )
3126	CASE ( 1 )
3127	netcdf_data_format_string = 'netCDF classic'
3128	CASE ( 2 )
3129	netcdf_data_format_string = 'netCDF 64bit offset'
3130	CASE ( 3 )
3131	netcdf_data_format_string = 'netCDF4/HDF5'
3132	CASE ( 4 )
3133	netcdf_data_format_string = 'netCDF4/HDF5 classic'
3134	CASE ( 5 )
3135	netcdf_data_format_string = 'parallel netCDF4/HDF5'
3136	CASE ( 6 )
3137	netcdf_data_format_string = 'parallel netCDF4/HDF5 classic'
3138
3139	END SELECT
3140
3141	!
3142	!-- Check mask conditions
3143	DO mid = 1, max_masks
3144	IF ( data_output_masks(mid,1) /= ' ' .OR. &
3145	data_output_masks_user(mid,1) /= ' ' ) THEN
3146	masks = masks + 1
3147	ENDIF
3148	ENDDO
3149
3150	IF ( masks < 0 .OR. masks > max_masks ) THEN
3151	WRITE( message_string, * ) 'illegal value: masks must be >= 0 and ', &
3152	'<= ', max_masks, ' (=max_masks)'
3153	CALL message( 'check_parameters', 'PA0325', 1, 2, 0, 6, 0 )
3154	ENDIF
3155	IF ( masks > 0 ) THEN
3156	mask_scale(1) = mask_scale_x
3157	mask_scale(2) = mask_scale_y
3158	mask_scale(3) = mask_scale_z
3159	IF ( ANY( mask_scale <= 0.0_wp ) ) THEN
3160	WRITE( message_string, * ) &
3161	'illegal value: mask_scale_x, mask_scale_y and mask_scale_z', &
3162	'must be > 0.0'
3163	CALL message( 'check_parameters', 'PA0326', 1, 2, 0, 6, 0 )
3164	ENDIF
3165	!
3166	!-- Generate masks for masked data output
3167	!-- Parallel netcdf output is not tested so far for masked data, hence
3168	!-- netcdf_data_format is switched back to non-paralell output.
3169	netcdf_data_format_save = netcdf_data_format
3170	IF ( netcdf_data_format > 4 ) THEN
3171	IF ( netcdf_data_format == 5 ) netcdf_data_format = 3
3172	IF ( netcdf_data_format == 6 ) netcdf_data_format = 4
3173	message_string = 'netCDF file formats '// &
3174	'5 (parallel netCDF 4) and ' // &
3175	'6 (parallel netCDF 4 Classic model) '// &
3176	'&are currently not supported (not yet tested) ' // &
3177	'for masked data.&Using respective non-parallel' // &
3178	' output for masked data.'
3179	CALL message( 'check_parameters', 'PA0383', 0, 0, 0, 6, 0 )
3180	ENDIF
3181	CALL init_masks
3182	netcdf_data_format = netcdf_data_format_save
3183	ENDIF
3184
3185	!
3186	!-- Check the NetCDF data format
3187	IF ( netcdf_data_format > 2 ) THEN
3188	#if defined( __netcdf4 )
3189	CONTINUE
3190	#else
3191	message_string = 'netCDF: netCDF4 format requested but no ' // &
3192	'cpp-directive __netcdf4 given & switch ' // &
3193	'back to 64-bit offset format'
3194	CALL message( 'check_parameters', 'PA0171', 0, 1, 0, 6, 0 )
3195	netcdf_data_format = 2
3196	#endif
3197	ENDIF
3198	IF ( netcdf_data_format > 4 ) THEN
3199	#if defined( __netcdf4 ) && defined( __netcdf4_parallel )
3200	CONTINUE
3201	#else
3202	message_string = 'netCDF: netCDF4 parallel output requested but no ' // &
3203	'cpp-directive __netcdf4_parallel given & switch ' // &
3204	'back to netCDF4 non-parallel output'
3205	CALL message( 'check_parameters', 'PA0099', 0, 1, 0, 6, 0 )
3206	netcdf_data_format = netcdf_data_format - 2
3207	#endif
3208	ENDIF
3209
3210	!
3211	!-- Calculate fixed number of output time levels for parallel netcdf output.
3212	!-- The time dimension has to be defined as limited for parallel output,
3213	!-- because otherwise the I/O performance drops significantly.
3214	IF ( netcdf_data_format > 4 ) THEN
3215
3216	!
3217	!-- Check if any of the follwoing data output interval is 0.0s, which is
3218	!-- not allowed for parallel output.
3219	CALL check_dt_do( dt_do3d, 'dt_do3d' )
3220	CALL check_dt_do( dt_do2d_xy, 'dt_do2d_xy' )
3221	CALL check_dt_do( dt_do2d_xz, 'dt_do2d_xz' )
3222	CALL check_dt_do( dt_do2d_yz, 'dt_do2d_yz' )
3223
3224	ntdim_3d(0) = INT( ( end_time - skip_time_do3d ) / dt_do3d )
3225	IF ( do3d_at_begin ) ntdim_3d(0) = ntdim_3d(0) + 1
3226	ntdim_3d(1) = INT( ( end_time - skip_time_data_output_av ) &
3227	/ dt_data_output_av )
3228	ntdim_2d_xy(0) = INT( ( end_time - skip_time_do2d_xy ) / dt_do2d_xy )
3229	ntdim_2d_xz(0) = INT( ( end_time - skip_time_do2d_xz ) / dt_do2d_xz )
3230	ntdim_2d_yz(0) = INT( ( end_time - skip_time_do2d_yz ) / dt_do2d_yz )
3231	IF ( do2d_at_begin ) THEN
3232	ntdim_2d_xy(0) = ntdim_2d_xy(0) + 1
3233	ntdim_2d_xz(0) = ntdim_2d_xz(0) + 1
3234	ntdim_2d_yz(0) = ntdim_2d_yz(0) + 1
3235	ENDIF
3236	ntdim_2d_xy(1) = ntdim_3d(1)
3237	ntdim_2d_xz(1) = ntdim_3d(1)
3238	ntdim_2d_yz(1) = ntdim_3d(1)
3239
3240	ENDIF
3241
3242	!
3243	!-- Check, whether a constant diffusion coefficient shall be used
3244	IF ( km_constant /= -1.0_wp ) THEN
3245	IF ( km_constant < 0.0_wp ) THEN
3246	WRITE( message_string, * ) 'km_constant = ', km_constant, ' < 0.0'
3247	CALL message( 'check_parameters', 'PA0121', 1, 2, 0, 6, 0 )
3248	ELSE
3249	IF ( prandtl_number < 0.0_wp ) THEN
3250	WRITE( message_string, * ) 'prandtl_number = ', prandtl_number, &
3251	' < 0.0'
3252	CALL message( 'check_parameters', 'PA0122', 1, 2, 0, 6, 0 )
3253	ENDIF
3254	constant_diffusion = .TRUE.
3255
3256	IF ( constant_flux_layer ) THEN
3257	message_string = 'constant_flux_layer is not allowed with fixed ' &
3258	// 'value of km'
3259	CALL message( 'check_parameters', 'PA0123', 1, 2, 0, 6, 0 )
3260	ENDIF
3261	ENDIF
3262	ENDIF
3263
3264	!
3265	!-- In case of non-cyclic lateral boundaries and a damping layer for the
3266	!-- potential temperature, check the width of the damping layer
3267	IF ( bc_lr /= 'cyclic' ) THEN
3268	IF ( pt_damping_width < 0.0_wp .OR. &
3269	pt_damping_width > REAL( nx * dx ) ) THEN
3270	message_string = 'pt_damping_width out of range'
3271	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
3272	ENDIF
3273	ENDIF
3274
3275	IF ( bc_ns /= 'cyclic' ) THEN
3276	IF ( pt_damping_width < 0.0_wp .OR. &
3277	pt_damping_width > REAL( ny * dy ) ) THEN
3278	message_string = 'pt_damping_width out of range'
3279	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
3280	ENDIF
3281	ENDIF
3282
3283	!
3284	!-- Check value range for zeta = z/L
3285	IF ( zeta_min >= zeta_max ) THEN
3286	WRITE( message_string, * ) 'zeta_min = ', zeta_min, ' must be less ', &
3287	'than zeta_max = ', zeta_max
3288	CALL message( 'check_parameters', 'PA0125', 1, 2, 0, 6, 0 )
3289	ENDIF
3290
3291	!
3292	!-- Check random generator
3293	IF ( (random_generator /= 'system-specific' .AND. &
3294	random_generator /= 'random-parallel' ) .AND. &
3295	random_generator /= 'numerical-recipes' ) THEN
3296	message_string = 'unknown random generator: random_generator = "' // &
3297	TRIM( random_generator ) // '"'
3298	CALL message( 'check_parameters', 'PA0135', 1, 2, 0, 6, 0 )
3299	ENDIF
3300
3301	!
3302	!-- Determine upper and lower hight level indices for random perturbations
3303	IF ( disturbance_level_b == -9999999.9_wp ) THEN
3304	IF ( ocean ) THEN
3305	disturbance_level_b = zu((nzt*2)/3)
3306	disturbance_level_ind_b = ( nzt * 2 ) / 3
3307	ELSE
3308	disturbance_level_b = zu(nzb+3)
3309	disturbance_level_ind_b = nzb + 3
3310	ENDIF
3311	ELSEIF ( disturbance_level_b < zu(3) ) THEN
3312	WRITE( message_string, * ) 'disturbance_level_b = ', &
3313	disturbance_level_b, ' must be >= ', zu(3), '(zu(3))'
3314	CALL message( 'check_parameters', 'PA0126', 1, 2, 0, 6, 0 )
3315	ELSEIF ( disturbance_level_b > zu(nzt-2) ) THEN
3316	WRITE( message_string, * ) 'disturbance_level_b = ', &
3317	disturbance_level_b, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
3318	CALL message( 'check_parameters', 'PA0127', 1, 2, 0, 6, 0 )
3319	ELSE
3320	DO k = 3, nzt-2
3321	IF ( disturbance_level_b <= zu(k) ) THEN
3322	disturbance_level_ind_b = k
3323	EXIT
3324	ENDIF
3325	ENDDO
3326	ENDIF
3327
3328	IF ( disturbance_level_t == -9999999.9_wp ) THEN
3329	IF ( ocean ) THEN
3330	disturbance_level_t = zu(nzt-3)
3331	disturbance_level_ind_t = nzt - 3
3332	ELSE
3333	disturbance_level_t = zu(nzt/3)
3334	disturbance_level_ind_t = nzt / 3
3335	ENDIF
3336	ELSEIF ( disturbance_level_t > zu(nzt-2) ) THEN
3337	WRITE( message_string, * ) 'disturbance_level_t = ', &
3338	disturbance_level_t, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
3339	CALL message( 'check_parameters', 'PA0128', 1, 2, 0, 6, 0 )
3340	ELSEIF ( disturbance_level_t < disturbance_level_b ) THEN
3341	WRITE( message_string, * ) 'disturbance_level_t = ', &
3342	disturbance_level_t, ' must be >= disturbance_level_b = ', &
3343	disturbance_level_b
3344	CALL message( 'check_parameters', 'PA0129', 1, 2, 0, 6, 0 )
3345	ELSE
3346	DO k = 3, nzt-2
3347	IF ( disturbance_level_t <= zu(k) ) THEN
3348	disturbance_level_ind_t = k
3349	EXIT
3350	ENDIF
3351	ENDDO
3352	ENDIF
3353
3354	!
3355	!-- Check again whether the levels determined this way are ok.
3356	!-- Error may occur at automatic determination and too few grid points in
3357	!-- z-direction.
3358	IF ( disturbance_level_ind_t < disturbance_level_ind_b ) THEN
3359	WRITE( message_string, * ) 'disturbance_level_ind_t = ', &
3360	disturbance_level_ind_t, ' must be >= disturbance_level_b = ', &
3361	disturbance_level_b
3362	CALL message( 'check_parameters', 'PA0130', 1, 2, 0, 6, 0 )
3363	ENDIF
3364
3365	!
3366	!-- Determine the horizontal index range for random perturbations.
3367	!-- In case of non-cyclic horizontal boundaries, no perturbations are imposed
3368	!-- near the inflow and the perturbation area is further limited to ...(1)
3369	!-- after the initial phase of the flow.
3370
3371	IF ( bc_lr /= 'cyclic' ) THEN
3372	IF ( inflow_disturbance_begin == -1 ) THEN
3373	inflow_disturbance_begin = MIN( 10, nx/2 )
3374	ENDIF
3375	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > nx )&
3376	THEN
3377	message_string = 'inflow_disturbance_begin out of range'
3378	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
3379	ENDIF
3380	IF ( inflow_disturbance_end == -1 ) THEN
3381	inflow_disturbance_end = MIN( 100, 3*nx/4 )
3382	ENDIF
3383	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > nx ) &
3384	THEN
3385	message_string = 'inflow_disturbance_end out of range'
3386	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
3387	ENDIF
3388	ELSEIF ( bc_ns /= 'cyclic' ) THEN
3389	IF ( inflow_disturbance_begin == -1 ) THEN
3390	inflow_disturbance_begin = MIN( 10, ny/2 )
3391	ENDIF
3392	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > ny )&
3393	THEN
3394	message_string = 'inflow_disturbance_begin out of range'
3395	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
3396	ENDIF
3397	IF ( inflow_disturbance_end == -1 ) THEN
3398	inflow_disturbance_end = MIN( 100, 3*ny/4 )
3399	ENDIF
3400	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > ny ) &
3401	THEN
3402	message_string = 'inflow_disturbance_end out of range'
3403	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
3404	ENDIF
3405	ENDIF
3406
3407	IF ( random_generator == 'random-parallel' ) THEN
3408	dist_nxl = nxl; dist_nxr = nxr
3409	dist_nys = nys; dist_nyn = nyn
3410	IF ( bc_lr == 'radiation/dirichlet' ) THEN
3411	dist_nxr = MIN( nx - inflow_disturbance_begin, nxr )
3412	dist_nxl(1) = MAX( nx - inflow_disturbance_end, nxl )
3413	ELSEIF ( bc_lr == 'dirichlet/radiation' ) THEN
3414	dist_nxl = MAX( inflow_disturbance_begin, nxl )
3415	dist_nxr(1) = MIN( inflow_disturbance_end, nxr )
3416	ENDIF
3417	IF ( bc_ns == 'dirichlet/radiation' ) THEN
3418	dist_nyn = MIN( ny - inflow_disturbance_begin, nyn )
3419	dist_nys(1) = MAX( ny - inflow_disturbance_end, nys )
3420	ELSEIF ( bc_ns == 'radiation/dirichlet' ) THEN
3421	dist_nys = MAX( inflow_disturbance_begin, nys )
3422	dist_nyn(1) = MIN( inflow_disturbance_end, nyn )
3423	ENDIF
3424	ELSE
3425	dist_nxl = 0; dist_nxr = nx
3426	dist_nys = 0; dist_nyn = ny
3427	IF ( bc_lr == 'radiation/dirichlet' ) THEN
3428	dist_nxr = nx - inflow_disturbance_begin
3429	dist_nxl(1) = nx - inflow_disturbance_end
3430	ELSEIF ( bc_lr == 'dirichlet/radiation' ) THEN
3431	dist_nxl = inflow_disturbance_begin
3432	dist_nxr(1) = inflow_disturbance_end
3433	ENDIF
3434	IF ( bc_ns == 'dirichlet/radiation' ) THEN
3435	dist_nyn = ny - inflow_disturbance_begin
3436	dist_nys(1) = ny - inflow_disturbance_end
3437	ELSEIF ( bc_ns == 'radiation/dirichlet' ) THEN
3438	dist_nys = inflow_disturbance_begin
3439	dist_nyn(1) = inflow_disturbance_end
3440	ENDIF
3441	ENDIF
3442
3443	!
3444	!-- A turbulent inflow requires Dirichlet conditions at the respective inflow
3445	!-- boundary (so far, a turbulent inflow is realized from the left side only)
3446	IF ( turbulent_inflow .AND. bc_lr /= 'dirichlet/radiation' ) THEN
3447	message_string = 'turbulent_inflow = .T. requires a Dirichlet ' // &
3448	'condition at the inflow boundary'
3449	CALL message( 'check_parameters', 'PA0133', 1, 2, 0, 6, 0 )
3450	ENDIF
3451
3452	!
3453	!-- Turbulent inflow requires that 3d arrays have been cyclically filled with
3454	!-- data from prerun in the first main run
3455	IF ( turbulent_inflow .AND. initializing_actions /= 'cyclic_fill' .AND. &
3456	initializing_actions /= 'read_restart_data' ) THEN
3457	message_string = 'turbulent_inflow = .T. requires ' // &
3458	'initializing_actions = ''cyclic_fill'' '
3459	CALL message( 'check_parameters', 'PA0055', 1, 2, 0, 6, 0 )
3460	ENDIF
3461
3462	!
3463	!-- In case of turbulent inflow calculate the index of the recycling plane
3464	IF ( turbulent_inflow ) THEN
3465	IF ( recycling_width == 9999999.9_wp ) THEN
3466	!
3467	!-- Set the default value for the width of the recycling domain
3468	recycling_width = 0.1_wp * nx * dx
3469	ELSE
3470	IF ( recycling_width < dx .OR. recycling_width > nx * dx ) THEN
3471	WRITE( message_string, * ) 'illegal value for recycling_width:', &
3472	' ', recycling_width
3473	CALL message( 'check_parameters', 'PA0134', 1, 2, 0, 6, 0 )
3474	ENDIF
3475	ENDIF
3476	!
3477	!-- Calculate the index
3478	recycling_plane = recycling_width / dx
3479	!
3480	!-- Because the y-shift is done with a distance of INT( npey / 2 ) no shift
3481	!-- is possible if there is only one PE in y direction.
3482	IF ( recycling_yshift .AND. pdims(2) < 2 ) THEN
3483	WRITE( message_string, * ) 'recycling_yshift = .T. requires more', &
3484	' than one processor in y direction'
3485	CALL message( 'check_parameters', 'PA0421', 1, 2, 0, 6, 0 )
3486	ENDIF
3487	ENDIF
3488
3489	!
3490	!-- Determine damping level index for 1D model
3491	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
3492	IF ( damp_level_1d == -1.0_wp ) THEN
3493	damp_level_1d = zu(nzt+1)
3494	damp_level_ind_1d = nzt + 1
3495	ELSEIF ( damp_level_1d < 0.0_wp .OR. damp_level_1d > zu(nzt+1) ) THEN
3496	WRITE( message_string, * ) 'damp_level_1d = ', damp_level_1d, &
3497	' must be > 0.0 and < ', zu(nzt+1), '(zu(nzt+1))'
3498	CALL message( 'check_parameters', 'PA0136', 1, 2, 0, 6, 0 )
3499	ELSE
3500	DO k = 1, nzt+1
3501	IF ( damp_level_1d <= zu(k) ) THEN
3502	damp_level_ind_1d = k
3503	EXIT
3504	ENDIF
3505	ENDDO
3506	ENDIF
3507	ENDIF
3508
3509	!
3510	!-- Check some other 1d-model parameters
3511	IF ( TRIM( mixing_length_1d ) /= 'as_in_3d_model' .AND. &
3512	TRIM( mixing_length_1d ) /= 'blackadar' ) THEN
3513	message_string = 'mixing_length_1d = "' // TRIM( mixing_length_1d ) // &
3514	'" is unknown'
3515	CALL message( 'check_parameters', 'PA0137', 1, 2, 0, 6, 0 )
3516	ENDIF
3517	IF ( TRIM( dissipation_1d ) /= 'as_in_3d_model' .AND. &
3518	TRIM( dissipation_1d ) /= 'detering' ) THEN
3519	message_string = 'dissipation_1d = "' // TRIM( dissipation_1d ) // &
3520	'" is unknown'
3521	CALL message( 'check_parameters', 'PA0138', 1, 2, 0, 6, 0 )
3522	ENDIF
3523
3524	!
3525	!-- Set time for the next user defined restart (time_restart is the
3526	!-- internal parameter for steering restart events)
3527	IF ( restart_time /= 9999999.9_wp ) THEN
3528	IF ( restart_time > time_since_reference_point ) THEN
3529	time_restart = restart_time
3530	ENDIF
3531	ELSE
3532	!
3533	!-- In case of a restart run, set internal parameter to default (no restart)
3534	!-- if the NAMELIST-parameter restart_time is omitted
3535	time_restart = 9999999.9_wp
3536	ENDIF
3537
3538	!
3539	!-- Set default value of the time needed to terminate a model run
3540	IF ( termination_time_needed == -1.0_wp ) THEN
3541	IF ( host(1:3) == 'ibm' ) THEN
3542	termination_time_needed = 300.0_wp
3543	ELSE
3544	termination_time_needed = 35.0_wp
3545	ENDIF
3546	ENDIF
3547
3548	!
3549	!-- Check the time needed to terminate a model run
3550	IF ( host(1:3) == 't3e' ) THEN
3551	!
3552	!-- Time needed must be at least 30 seconds on all CRAY machines, because
3553	!-- MPP_TREMAIN gives the remaining CPU time only in steps of 30 seconds
3554	IF ( termination_time_needed <= 30.0_wp ) THEN
3555	WRITE( message_string, * ) 'termination_time_needed = ', &
3556	termination_time_needed, ' must be > 30.0 on host "', &
3557	TRIM( host ), '"'
3558	CALL message( 'check_parameters', 'PA0139', 1, 2, 0, 6, 0 )
3559	ENDIF
3560	ELSEIF ( host(1:3) == 'ibm' ) THEN
3561	!
3562	!-- On IBM-regatta machines the time should be at least 300 seconds,
3563	!-- because the job time consumed before executing palm (for compiling,
3564	!-- copying of files, etc.) has to be regarded
3565	IF ( termination_time_needed < 300.0_wp ) THEN
3566	WRITE( message_string, * ) 'termination_time_needed = ', &
3567	termination_time_needed, ' should be >= 300.0 on host "', &
3568	TRIM( host ), '"'
3569	CALL message( 'check_parameters', 'PA0140', 1, 2, 0, 6, 0 )
3570	ENDIF
3571	ENDIF
3572
3573	!
3574	!-- Check pressure gradient conditions
3575	IF ( dp_external .AND. conserve_volume_flow ) THEN
3576	WRITE( message_string, * ) 'Both dp_external and conserve_volume_flo', &
3577	'w are .TRUE. but one of them must be .FALSE.'
3578	CALL message( 'check_parameters', 'PA0150', 1, 2, 0, 6, 0 )
3579	ENDIF
3580	IF ( dp_external ) THEN
3581	IF ( dp_level_b < zu(nzb) .OR. dp_level_b > zu(nzt) ) THEN
3582	WRITE( message_string, * ) 'dp_level_b = ', dp_level_b, ' is out ', &
3583	' of range'
3584	CALL message( 'check_parameters', 'PA0151', 1, 2, 0, 6, 0 )
3585	ENDIF
3586	IF ( .NOT. ANY( dpdxy /= 0.0_wp ) ) THEN
3587	WRITE( message_string, * ) 'dp_external is .TRUE. but dpdxy is ze', &
3588	'ro, i.e. the external pressure gradient & will not be applied'
3589	CALL message( 'check_parameters', 'PA0152', 0, 1, 0, 6, 0 )
3590	ENDIF
3591	ENDIF
3592	IF ( ANY( dpdxy /= 0.0_wp ) .AND. .NOT. dp_external ) THEN
3593	WRITE( message_string, * ) 'dpdxy is nonzero but dp_external is ', &
3594	'.FALSE., i.e. the external pressure gradient & will not be applied'
3595	CALL message( 'check_parameters', 'PA0153', 0, 1, 0, 6, 0 )
3596	ENDIF
3597	IF ( conserve_volume_flow ) THEN
3598	IF ( TRIM( conserve_volume_flow_mode ) == 'default' ) THEN
3599
3600	conserve_volume_flow_mode = 'initial_profiles'
3601
3602	ELSEIF ( TRIM( conserve_volume_flow_mode ) /= 'initial_profiles' .AND. &
3603	TRIM( conserve_volume_flow_mode ) /= 'inflow_profile' .AND. &
3604	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) THEN
3605	WRITE( message_string, * ) 'unknown conserve_volume_flow_mode: ', &
3606	conserve_volume_flow_mode
3607	CALL message( 'check_parameters', 'PA0154', 1, 2, 0, 6, 0 )
3608	ENDIF
3609	IF ( (bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic') .AND. &
3610	TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
3611	WRITE( message_string, * ) 'non-cyclic boundary conditions ', &
3612	'require conserve_volume_flow_mode = ''initial_profiles'''
3613	CALL message( 'check_parameters', 'PA0155', 1, 2, 0, 6, 0 )
3614	ENDIF
3615	IF ( bc_lr == 'cyclic' .AND. bc_ns == 'cyclic' .AND. &
3616	TRIM( conserve_volume_flow_mode ) == 'inflow_profile' ) THEN
3617	WRITE( message_string, * ) 'cyclic boundary conditions ', &
3618	'require conserve_volume_flow_mode = ''initial_profiles''', &
3619	' or ''bulk_velocity'''
3620	CALL message( 'check_parameters', 'PA0156', 1, 2, 0, 6, 0 )
3621	ENDIF
3622	ENDIF
3623	IF ( ( u_bulk /= 0.0_wp .OR. v_bulk /= 0.0_wp ) .AND. &
3624	( .NOT. conserve_volume_flow .OR. &
3625	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) ) THEN
3626	WRITE( message_string, * ) 'nonzero bulk velocity requires ', &
3627	'conserve_volume_flow = .T. and ', &
3628	'conserve_volume_flow_mode = ''bulk_velocity'''
3629	CALL message( 'check_parameters', 'PA0157', 1, 2, 0, 6, 0 )
3630	ENDIF
3631
3632	!
3633	!-- Check particle attributes
3634	IF ( particle_color /= 'none' ) THEN
3635	IF ( particle_color /= 'absuv' .AND. particle_color /= 'pt*' .AND. &
3636	particle_color /= 'z' ) THEN
3637	message_string = 'illegal value for parameter particle_color: ' // &
3638	TRIM( particle_color)
3639	CALL message( 'check_parameters', 'PA0313', 1, 2, 0, 6, 0 )
3640	ELSE
3641	IF ( color_interval(2) <= color_interval(1) ) THEN
3642	message_string = 'color_interval(2) <= color_interval(1)'
3643	CALL message( 'check_parameters', 'PA0315', 1, 2, 0, 6, 0 )
3644	ENDIF
3645	ENDIF
3646	ENDIF
3647
3648	IF ( particle_dvrpsize /= 'none' ) THEN
3649	IF ( particle_dvrpsize /= 'absw' ) THEN
3650	message_string = 'illegal value for parameter particle_dvrpsize:' // &
3651	' ' // TRIM( particle_color)
3652	CALL message( 'check_parameters', 'PA0314', 1, 2, 0, 6, 0 )
3653	ELSE
3654	IF ( dvrpsize_interval(2) <= dvrpsize_interval(1) ) THEN
3655	message_string = 'dvrpsize_interval(2) <= dvrpsize_interval(1)'
3656	CALL message( 'check_parameters', 'PA0316', 1, 2, 0, 6, 0 )
3657	ENDIF
3658	ENDIF
3659	ENDIF
3660
3661	!
3662	!-- Check nudging and large scale forcing from external file
3663	IF ( nudging .AND. ( .NOT. large_scale_forcing ) ) THEN
3664	message_string = 'Nudging requires large_scale_forcing = .T.. &'// &
3665	'Surface fluxes and geostrophic wind should be &'// &
3666	'prescribed in file LSF_DATA'
3667	CALL message( 'check_parameters', 'PA0374', 1, 2, 0, 6, 0 )
3668	ENDIF
3669
3670	IF ( large_scale_forcing .AND. ( bc_lr /= 'cyclic' .OR. &
3671	bc_ns /= 'cyclic' ) ) THEN
3672	message_string = 'Non-cyclic lateral boundaries do not allow for &' // &
3673	'the usage of large scale forcing from external file.'
3674	CALL message( 'check_parameters', 'PA0375', 1, 2, 0, 6, 0 )
3675	ENDIF
3676
3677	IF ( large_scale_forcing .AND. ( .NOT. humidity ) ) THEN
3678	message_string = 'The usage of large scale forcing from external &'// &
3679	'file LSF_DATA requires humidity = .T..'
3680	CALL message( 'check_parameters', 'PA0376', 1, 2, 0, 6, 0 )
3681	ENDIF
3682
3683	IF ( large_scale_forcing .AND. passive_scalar ) THEN
3684	message_string = 'The usage of large scale forcing from external &'// &
3685	'file LSF_DATA is not implemented for passive scalars'
3686	CALL message( 'check_parameters', 'PA0440', 1, 2, 0, 6, 0 )
3687	ENDIF
3688
3689	IF ( large_scale_forcing .AND. topography /= 'flat' ) THEN
3690	message_string = 'The usage of large scale forcing from external &'// &
3691	'file LSF_DATA is not implemented for non-flat topography'
3692	CALL message( 'check_parameters', 'PA0377', 1, 2, 0, 6, 0 )
3693	ENDIF
3694
3695	IF ( large_scale_forcing .AND. ocean ) THEN
3696	message_string = 'The usage of large scale forcing from external &'// &
3697	'file LSF_DATA is not implemented for ocean runs'
3698	CALL message( 'check_parameters', 'PA0378', 1, 2, 0, 6, 0 )
3699	ENDIF
3700
3701	!
3702	!-- Prevent empty time records in volume, cross-section and masked data in case
3703	!-- of non-parallel netcdf-output in restart runs
3704	IF ( netcdf_data_format < 5 ) THEN
3705	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
3706	do3d_time_count = 0
3707	do2d_xy_time_count = 0
3708	do2d_xz_time_count = 0
3709	do2d_yz_time_count = 0
3710	domask_time_count = 0
3711	ENDIF
3712	ENDIF
3713
3714	!
3715	!-- Check for valid setting of most_method
3716	IF ( TRIM( most_method ) /= 'circular' .AND. &
3717	TRIM( most_method ) /= 'newton' .AND. &
3718	TRIM( most_method ) /= 'lookup' ) THEN
3719	message_string = 'most_method = "' // TRIM( most_method ) // &
3720	'" is unknown'
3721	CALL message( 'check_parameters', 'PA0416', 1, 2, 0, 6, 0 )
3722	ENDIF
3723
3724	!
3725	!-- Check roughness length, which has to be smaller than dz/2
3726	IF ( ( constant_flux_layer .OR. &
3727	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) &
3728	.AND. roughness_length > 0.5 * dz ) THEN
3729	message_string = 'roughness_length must be smaller than dz/2'
3730	CALL message( 'check_parameters', 'PA0424', 1, 2, 0, 6, 0 )
3731	ENDIF
3732
3733	CALL location_message( 'finished', .TRUE. )
3734	!
3735	!-- Check &userpar parameters
3736	CALL user_check_parameters
3737
3738	CONTAINS
3739
3740	!------------------------------------------------------------------------------!
3741	! Description:
3742	! ------------
3743	!> Check the length of data output intervals. In case of parallel NetCDF output
3744	!> the time levels of the output files need to be fixed. Therefore setting the
3745	!> output interval to 0.0s (usually used to output each timestep) is not
3746	!> possible as long as a non-fixed timestep is used.
3747	!------------------------------------------------------------------------------!
3748
3749	SUBROUTINE check_dt_do( dt_do, dt_do_name )
3750
3751	IMPLICIT NONE
3752
3753	CHARACTER (LEN=*), INTENT (IN) :: dt_do_name !< parin variable name
3754
3755	REAL(wp), INTENT (INOUT) :: dt_do !< data output interval
3756
3757	IF ( dt_do == 0.0_wp ) THEN
3758	IF ( dt_fixed ) THEN
3759	WRITE( message_string, '(A,F9.4,A)' ) 'Output at every ' // &
3760	'timestep is desired (' // dt_do_name // ' = 0.0).&'// &
3761	'Setting the output interval to the fixed timestep '// &
3762	'dt = ', dt, 's.'
3763	CALL message( 'check_parameters', 'PA0060', 0, 0, 0, 6, 0 )
3764	dt_do = dt
3765	ELSE
3766	message_string = dt_do_name // ' = 0.0 while using a ' // &
3767	'variable timestep and parallel netCDF4 ' // &
3768	'is not allowed.'
3769	CALL message( 'check_parameters', 'PA0081', 1, 2, 0, 6, 0 )
3770	ENDIF
3771	ENDIF
3772
3773	END SUBROUTINE check_dt_do
3774
3775
3776
3777
3778	!------------------------------------------------------------------------------!
3779	! Description:
3780	! ------------
3781	!> Inititalizes the vertical profiles of scalar quantities.
3782	!------------------------------------------------------------------------------!
3783
3784	SUBROUTINE init_vertical_profiles( vertical_gradient_level_ind, &
3785	vertical_gradient_level, &
3786	vertical_gradient, &
3787	pr_init, surface_value, bc_t_val )
3788
3789
3790	IMPLICIT NONE
3791
3792	INTEGER(iwp) :: i !< counter
3793	INTEGER(iwp), DIMENSION(1:10) :: vertical_gradient_level_ind !< vertical grid indices for gradient levels
3794
3795	REAL(wp) :: bc_t_val !< model top gradient
3796	REAL(wp) :: gradient !< vertica gradient of the respective quantity
3797	REAL(wp) :: surface_value !< surface value of the respecitve quantity
3798
3799
3800	REAL(wp), DIMENSION(0:nz+1) :: pr_init !< initialisation profile
3801	REAL(wp), DIMENSION(1:10) :: vertical_gradient !< given vertical gradient
3802	REAL(wp), DIMENSION(1:10) :: vertical_gradient_level !< given vertical gradient level
3803
3804	i = 1
3805	gradient = 0.0_wp
3806
3807	IF ( .NOT. ocean ) THEN
3808
3809	vertical_gradient_level_ind(1) = 0
3810	DO k = 1, nzt+1
3811	IF ( i < 11 ) THEN
3812	IF ( vertical_gradient_level(i) < zu(k) .AND. &
3813	vertical_gradient_level(i) >= 0.0_wp ) THEN
3814	gradient = vertical_gradient(i) / 100.0_wp
3815	vertical_gradient_level_ind(i) = k - 1
3816	i = i + 1
3817	ENDIF
3818	ENDIF
3819	IF ( gradient /= 0.0_wp ) THEN
3820	IF ( k /= 1 ) THEN
3821	pr_init(k) = pr_init(k-1) + dzu(k) * gradient
3822	ELSE
3823	pr_init(k) = pr_init(k-1) + dzu(k) * gradient
3824	ENDIF
3825	ELSE
3826	pr_init(k) = pr_init(k-1)
3827	ENDIF
3828	!
3829	!-- Avoid negative values
3830	IF ( pr_init(k) < 0.0_wp ) THEN
3831	pr_init(k) = 0.0_wp
3832	ENDIF
3833	ENDDO
3834
3835	ELSE
3836
3837	vertical_gradient_level_ind(1) = nzt+1
3838	DO k = nzt, 0, -1
3839	IF ( i < 11 ) THEN
3840	IF ( vertical_gradient_level(i) > zu(k) .AND. &
3841	vertical_gradient_level(i) <= 0.0_wp ) THEN
3842	gradient = vertical_gradient(i) / 100.0_wp
3843	vertical_gradient_level_ind(i) = k + 1
3844	i = i + 1
3845	ENDIF
3846	ENDIF
3847	IF ( gradient /= 0.0_wp ) THEN
3848	IF ( k /= nzt ) THEN
3849	pr_init(k) = pr_init(k+1) - dzu(k+1) * gradient
3850	ELSE
3851	pr_init(k) = surface_value - 0.5_wp * dzu(k+1) * gradient
3852	pr_init(k+1) = surface_value + 0.5_wp * dzu(k+1) * gradient
3853	ENDIF
3854	ELSE
3855	pr_init(k) = pr_init(k+1)
3856	ENDIF
3857	!
3858	!-- Avoid negative humidities
3859	IF ( pr_init(k) < 0.0_wp ) THEN
3860	pr_init(k) = 0.0_wp
3861	ENDIF
3862	ENDDO
3863
3864	ENDIF
3865
3866	!
3867	!-- In case of no given gradients, choose zero gradient conditions
3868	IF ( vertical_gradient_level(1) == -1.0_wp ) THEN
3869	vertical_gradient_level(1) = 0.0_wp
3870	ENDIF
3871	!
3872	!-- Store gradient at the top boundary for possible Neumann boundary condition
3873	bc_t_val = ( pr_init(nzt+1) - pr_init(nzt) ) / dzu(nzt+1)
3874
3875	END SUBROUTINE init_vertical_profiles
3876
3877
3878
3879	!------------------------------------------------------------------------------!
3880	! Description:
3881	! ------------
3882	!> Set the bottom and top boundary conditions for humidity and scalars.
3883	!------------------------------------------------------------------------------!
3884
3885	SUBROUTINE set_bc_scalars( sq, bc_b, bc_t, ibc_b, ibc_t, err_nr_b, err_nr_t )
3886
3887
3888	IMPLICIT NONE
3889
3890	CHARACTER (LEN=1) :: sq !<
3891	CHARACTER (LEN=*) :: bc_b
3892	CHARACTER (LEN=*) :: bc_t
3893	CHARACTER (LEN=*) :: err_nr_b
3894	CHARACTER (LEN=*) :: err_nr_t
3895
3896	INTEGER(iwp) :: ibc_b
3897	INTEGER(iwp) :: ibc_t
3898
3899	!
3900	!-- Set Integer flags and check for possilbe errorneous settings for bottom
3901	!-- boundary condition
3902	IF ( bc_b == 'dirichlet' ) THEN
3903	ibc_b = 0
3904	ELSEIF ( bc_b == 'neumann' ) THEN
3905	ibc_b = 1
3906	ELSE
3907	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
3908	'_b ="' // TRIM( bc_b ) // '"'
3909	CALL message( 'check_parameters', err_nr_b, 1, 2, 0, 6, 0 )
3910	ENDIF
3911	!
3912	!-- Set Integer flags and check for possilbe errorneous settings for top
3913	!-- boundary condition
3914	IF ( bc_t == 'dirichlet' ) THEN
3915	ibc_t = 0
3916	ELSEIF ( bc_t == 'neumann' ) THEN
3917	ibc_t = 1
3918	ELSEIF ( bc_t == 'nested' ) THEN
3919	ibc_t = 3
3920	ELSE
3921	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
3922	'_t ="' // TRIM( bc_t ) // '"'
3923	CALL message( 'check_parameters', err_nr_t, 1, 2, 0, 6, 0 )
3924	ENDIF
3925
3926
3927	END SUBROUTINE set_bc_scalars
3928
3929
3930
3931	!------------------------------------------------------------------------------!
3932	! Description:
3933	! ------------
3934	!> Check for consistent settings of bottom boundary conditions for humidity
3935	!> and scalars.
3936	!------------------------------------------------------------------------------!
3937
3938	SUBROUTINE check_bc_scalars( sq, bc_b, ibc_b, &
3939	err_nr_1, err_nr_2, &
3940	constant_flux, surface_initial_change )
3941
3942
3943	IMPLICIT NONE
3944
3945	CHARACTER (LEN=1) :: sq !<
3946	CHARACTER (LEN=*) :: bc_b
3947	CHARACTER (LEN=*) :: err_nr_1
3948	CHARACTER (LEN=*) :: err_nr_2
3949
3950	INTEGER(iwp) :: ibc_b
3951
3952	LOGICAL :: constant_flux
3953
3954	REAL(wp) :: surface_initial_change
3955
3956	!
3957	!-- A given surface value implies Dirichlet boundary condition for
3958	!-- the respective quantity. In this case specification of a constant flux is
3959	!-- forbidden. However, an exception is made for large-scale forcing as well
3960	!-- as land-surface model.
3961	IF ( .NOT. land_surface .AND. .NOT. large_scale_forcing ) THEN
3962	IF ( ibc_b == 0 .AND. constant_flux ) THEN
3963	message_string = 'boundary condition: bc_' // TRIM( sq ) // '_b ' // &
3964	'= "' // TRIM( bc_b ) // '" is not allowed with ' // &
3965	'prescribed surface flux'
3966	CALL message( 'check_parameters', err_nr_1, 1, 2, 0, 6, 0 )
3967	ENDIF
3968	ENDIF
3969	IF ( constant_flux .AND. surface_initial_change /= 0.0_wp ) THEN
3970	WRITE( message_string, * ) 'a prescribed surface flux is not allo', &
3971	'wed with ', sq, '_surface_initial_change (/=0) = ', &
3972	surface_initial_change
3973	CALL message( 'check_parameters', err_nr_2, 1, 2, 0, 6, 0 )
3974	ENDIF
3975
3976
3977	END SUBROUTINE check_bc_scalars
3978
3979
3980
3981	END SUBROUTINE check_parameters

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |