Home

Context Navigation

source: palm/trunk/SOURCE/check_parameters.f90 @ 196

Last change on this file since 196 was 181, checked in by raasch, 16 years ago
bugfixes + adjustments for SGI ICE system
Property svn:keywords set to `Id`
File size: 111.2 KB

Line
1	SUBROUTINE check_parameters
2
3	!------------------------------------------------------------------------------!
4	! Actual revisions:
5	! -----------------
6	! Bug fix: Construction of vertical profiles when 10 gradients have been
7	! specified in the parameter list (ug, vg, pt, q, sa, lad)
8	!
9	! Strict grid matching along z is not needed for mg-solver.
10	! Leaf area density (LAD) explicitly set to its surface value at k=0
11	! Case of reading data for recycling included in initializing_actions,
12	! check of turbulent_inflow and calculation of recycling_plane
13	!
14	! Former revisions:
15	! -----------------
16	! $Id: check_parameters.f90 181 2008-07-30 07:07:47Z raasch $
17	!
18	! 138 2007-11-28 10:03:58Z letzel
19	! Plant canopy added
20	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
21	! Multigrid solver allows topography, checking of dt_sort_particles
22	! Bugfix: initializing u_init and v_init in case of ocean runs
23	!
24	! 109 2007-08-28 15:26:47Z letzel
25	! Check coupling_mode and set default (obligatory) values (like boundary
26	! conditions for temperature and fluxes) in case of coupled runs.
27	! +profiles for wp and w"e
28	! Bugfix: Error message concerning output of particle concentration (pc)
29	! modified
30	! More checks and more default values for coupled runs
31	! allow data_output_pr= q, wq, w"q", wq for humidity = .T. (instead of
32	! cloud_physics = .T.)
33	! Rayleigh damping for ocean fixed.
34	! Check and, if necessary, set default value for dt_coupling
35	!
36	! 97 2007-06-21 08:23:15Z raasch
37	! Initial salinity profile is calculated, salinity boundary conditions are
38	! checked,
39	! z_max_do1d is checked only in case of ocean = .f.,
40	! +initial temperature and geostrophic velocity profiles for the ocean version,
41	! use_pt_reference renamed use_reference
42	!
43	! 89 2007-05-25 12:08:31Z raasch
44	! Check for user-defined profiles
45	!
46	! 75 2007-03-22 09:54:05Z raasch
47	! "by_user" allowed as initializing action, -data_output_ts,
48	! leapfrog with non-flat topography not allowed any more, loop_optimization
49	! and pt_reference are checked, moisture renamed humidity,
50	! output of precipitation amount/rate and roughnes length + check
51	! possible negative humidities are avoided in initial profile,
52	! dirichlet/neumann changed to dirichlet/radiation, etc.,
53	! revision added to run_description_header
54	!
55	! 20 2007-02-26 00:12:32Z raasch
56	! Temperature and humidity gradients at top are now calculated for nzt+1,
57	! top_heatflux and respective boundary condition bc_pt_t is checked
58	!
59	! RCS Log replace by Id keyword, revision history cleaned up
60	!
61	! Revision 1.61 2006/08/04 14:20:25 raasch
62	! do2d_unit and do3d_unit now defined as 2d-arrays, check of
63	! use_upstream_for_tke, default value for dt_dopts,
64	! generation of file header moved from routines palm and header to here
65	!
66	! Revision 1.1 1997/08/26 06:29:23 raasch
67	! Initial revision
68	!
69	!
70	! Description:
71	! ------------
72	! Check control parameters and deduce further quantities.
73	!------------------------------------------------------------------------------!
74
75	USE arrays_3d
76	USE constants
77	USE control_parameters
78	USE grid_variables
79	USE indices
80	USE model_1d
81	USE netcdf_control
82	USE particle_attributes
83	USE pegrid
84	USE profil_parameter
85	USE statistics
86	USE transpose_indices
87
88	IMPLICIT NONE
89
90	CHARACTER (LEN=1) :: sq
91	CHARACTER (LEN=6) :: var
92	CHARACTER (LEN=7) :: unit
93	CHARACTER (LEN=8) :: date
94	CHARACTER (LEN=10) :: time
95	CHARACTER (LEN=40) :: coupling_string
96	CHARACTER (LEN=100) :: action
97
98	INTEGER :: i, ilen, intervals, iremote = 0, iter, j, k, nnxh, nnyh, &
99	position, prec
100	LOGICAL :: found, ldum
101	REAL :: gradient, maxn, maxp, remote = 0.0
102
103	!
104	!-- Warning, if host is not set
105	IF ( host(1:1) == ' ' ) THEN
106	IF ( myid == 0 ) THEN
107	PRINT*, '+++ WARNING: check_parameters:'
108	PRINT*, ' "host" is not set. Please check that environment', &
109	' variable "localhost"'
110	PRINT*, ' is set before running PALM'
111	ENDIF
112	ENDIF
113
114	!
115	!-- Check the coupling mode
116	IF ( coupling_mode /= 'uncoupled' .AND. &
117	coupling_mode /= 'atmosphere_to_ocean' .AND. &
118	coupling_mode /= 'ocean_to_atmosphere' ) THEN
119	IF ( myid == 0 ) THEN
120	PRINT*, '+++ check_parameters:'
121	PRINT*, ' illegal coupling mode: ', TRIM( coupling_mode )
122	ENDIF
123	CALL local_stop
124	ENDIF
125
126	!
127	!-- Check dt_coupling, restart_time, dt_restart, end_time, dx, dy, nx and ny
128	IF ( coupling_mode /= 'uncoupled' ) THEN
129	IF ( dt_coupling == 9999999.9 ) THEN
130	IF ( myid == 0 ) THEN
131	PRINT*, '+++ check_parameters:'
132	PRINT*, ' dt_coupling is not set but required for coupling ', &
133	'mode: ', TRIM( coupling_mode )
134	ENDIF
135	CALL local_stop
136	ENDIF
137	#if defined( __parallel ) && defined( __mpi2 )
138	CALL MPI_SEND( dt_coupling, 1, MPI_REAL, myid, 11, comm_inter, ierr )
139	CALL MPI_RECV( remote, 1, MPI_REAL, myid, 11, comm_inter, status, ierr )
140	IF ( dt_coupling /= remote ) THEN
141	IF ( myid == 0 ) THEN
142	PRINT*, '+++ check_parameters:'
143	PRINT*, ' TRIM( coupling_mode ): dt_coupling = ', dt_coupling
144	PRINT*, ' is not equal to dt_coupling_remote = ', remote
145	ENDIF
146	CALL local_stop
147	ENDIF
148	IF ( dt_coupling <= 0.0 ) THEN
149	CALL MPI_SEND( dt_max, 1, MPI_REAL, myid, 19, comm_inter, ierr )
150	CALL MPI_RECV( remote, 1, MPI_REAL, myid, 19, comm_inter, status, &
151	ierr )
152	dt_coupling = MAX( dt_max, remote )
153	IF ( myid == 0 ) THEN
154	PRINT*, '+++ check_parameters:'
155	PRINT*, ' TRIM( coupling_mode ): dt_coupling <= 0.0'
156	PRINT*, ' is not allowed and is reset to MAX(dt_max(A,O)) = ', &
157	dt_coupling
158	ENDIF
159	ENDIF
160	CALL MPI_SEND( restart_time, 1, MPI_REAL, myid, 12, comm_inter, ierr )
161	CALL MPI_RECV( remote, 1, MPI_REAL, myid, 12, comm_inter, status, ierr )
162	IF ( restart_time /= remote ) THEN
163	IF ( myid == 0 ) THEN
164	PRINT*, '+++ check_parameters:'
165	PRINT*, ' TRIM( coupling_mode ): restart_time = ', restart_time
166	PRINT*, ' is not equal to restart_time_remote = ', remote
167	ENDIF
168	CALL local_stop
169	ENDIF
170	CALL MPI_SEND( dt_restart, 1, MPI_REAL, myid, 13, comm_inter, ierr )
171	CALL MPI_RECV( remote, 1, MPI_REAL, myid, 13, comm_inter, status, ierr )
172	IF ( dt_restart /= remote ) THEN
173	IF ( myid == 0 ) THEN
174	PRINT*, '+++ check_parameters:'
175	PRINT*, ' TRIM( coupling_mode ): dt_restart = ', dt_restart
176	PRINT*, ' is not equal to dt_restart_remote = ', remote
177	ENDIF
178	CALL local_stop
179	ENDIF
180	CALL MPI_SEND( end_time, 1, MPI_REAL, myid, 14, comm_inter, ierr )
181	CALL MPI_RECV( remote, 1, MPI_REAL, myid, 14, comm_inter, status, ierr )
182	IF ( end_time /= remote ) THEN
183	IF ( myid == 0 ) THEN
184	PRINT*, '+++ check_parameters:'
185	PRINT*, ' TRIM( coupling_mode ): end_time = ', end_time
186	PRINT*, ' is not equal to end_time_remote = ', remote
187	ENDIF
188	CALL local_stop
189	ENDIF
190	CALL MPI_SEND( dx, 1, MPI_REAL, myid, 15, comm_inter, ierr )
191	CALL MPI_RECV( remote, 1, MPI_REAL, myid, 15, comm_inter, status, ierr )
192	IF ( dx /= remote ) THEN
193	IF ( myid == 0 ) THEN
194	PRINT*, '+++ check_parameters:'
195	PRINT*, ' TRIM( coupling_mode ): dx = ', dx
196	PRINT*, ' is not equal to dx_remote = ', remote
197	ENDIF
198	CALL local_stop
199	ENDIF
200	CALL MPI_SEND( dy, 1, MPI_REAL, myid, 16, comm_inter, ierr )
201	CALL MPI_RECV( remote, 1, MPI_REAL, myid, 16, comm_inter, status, ierr )
202	IF ( dy /= remote ) THEN
203	IF ( myid == 0 ) THEN
204	PRINT*, '+++ check_parameters:'
205	PRINT*, ' TRIM( coupling_mode ): dy = ', dy
206	PRINT*, ' is not equal to dy_remote = ', remote
207	ENDIF
208	CALL local_stop
209	ENDIF
210	CALL MPI_SEND( nx, 1, MPI_INTEGER, myid, 17, comm_inter, ierr )
211	CALL MPI_RECV( iremote, 1, MPI_INTEGER, myid, 17, comm_inter, status, &
212	ierr )
213	IF ( nx /= iremote ) THEN
214	IF ( myid == 0 ) THEN
215	PRINT*, '+++ check_parameters:'
216	PRINT*, ' TRIM( coupling_mode ): nx = ', nx
217	PRINT*, ' is not equal to nx_remote = ', iremote
218	ENDIF
219	CALL local_stop
220	ENDIF
221	CALL MPI_SEND( ny, 1, MPI_INTEGER, myid, 18, comm_inter, ierr )
222	CALL MPI_RECV( iremote, 1, MPI_INTEGER, myid, 18, comm_inter, status, &
223	ierr )
224	IF ( ny /= iremote ) THEN
225	IF ( myid == 0 ) THEN
226	PRINT*, '+++ check_parameters:'
227	PRINT*, ' TRIM( coupling_mode ): ny = ', ny
228	PRINT*, ' is not equal to ny_remote = ', iremote
229	ENDIF
230	CALL local_stop
231	ENDIF
232	#endif
233	ENDIF
234
235	#if defined( __parallel ) && defined( __mpi2 )
236	!
237	!-- Exchange via intercommunicator
238	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
239	CALL MPI_SEND( humidity, &
240	1, MPI_LOGICAL, myid, 19, comm_inter, ierr )
241	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
242	CALL MPI_RECV( humidity_remote, &
243	1, MPI_LOGICAL, myid, 19, comm_inter, status, ierr )
244	ENDIF
245	#endif
246
247
248	!
249	!-- Generate the file header which is used as a header for most of PALM's
250	!-- output files
251	CALL DATE_AND_TIME( date, time )
252	run_date = date(7:8)//'-'//date(5:6)//'-'//date(3:4)
253	run_time = time(1:2)//':'//time(3:4)//':'//time(5:6)
254	IF ( coupling_mode == 'uncoupled' ) THEN
255	coupling_string = ''
256	ELSEIF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
257	coupling_string = ' coupled (atmosphere)'
258	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
259	coupling_string = ' coupled (ocean)'
260	ENDIF
261
262	WRITE ( run_description_header, &
263	'(A,2X,A,2X,A,A,A,I2.2,A,2X,A,A,2X,A,1X,A)' ) &
264	TRIM( version ), TRIM( revision ), 'run: ', &
265	TRIM( run_identifier ), '.', runnr, TRIM( coupling_string ), &
266	'host: ', TRIM( host ), run_date, run_time
267
268	!
269	!-- Check the general loop optimization method
270	IF ( loop_optimization == 'default' ) THEN
271	IF ( host(1:3) == 'nec' ) THEN
272	loop_optimization = 'vector'
273	ELSE
274	loop_optimization = 'cache'
275	ENDIF
276	ENDIF
277	IF ( loop_optimization /= 'noopt' .AND. loop_optimization /= 'cache' &
278	.AND. loop_optimization /= 'vector' ) THEN
279	IF ( myid == 0 ) THEN
280	PRINT*, '+++ check_parameters:'
281	PRINT*, ' illegal value given for loop_optimization: ', &
282	TRIM( loop_optimization )
283	ENDIF
284	CALL local_stop
285	ENDIF
286
287	!
288	!-- Check topography setting (check for illegal parameter combinations)
289	IF ( topography /= 'flat' ) THEN
290	action = ' '
291	IF ( scalar_advec /= 'pw-scheme' ) THEN
292	WRITE( action, '(A,A)' ) 'scalar_advec = ', scalar_advec
293	ENDIF
294	IF ( momentum_advec /= 'pw-scheme' ) THEN
295	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
296	ENDIF
297	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
298	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
299	ENDIF
300	IF ( psolver == 'sor' ) THEN
301	WRITE( action, '(A,A)' ) 'psolver = ', psolver
302	ENDIF
303	IF ( sloping_surface ) THEN
304	WRITE( action, '(A)' ) 'sloping surface = .TRUE.'
305	ENDIF
306	IF ( galilei_transformation ) THEN
307	WRITE( action, '(A)' ) 'galilei_transformation = .TRUE.'
308	ENDIF
309	IF ( cloud_physics ) THEN
310	WRITE( action, '(A)' ) 'cloud_physics = .TRUE.'
311	ENDIF
312	IF ( cloud_droplets ) THEN
313	WRITE( action, '(A)' ) 'cloud_droplets = .TRUE.'
314	ENDIF
315	IF ( humidity ) THEN
316	WRITE( action, '(A)' ) 'humidity = .TRUE.'
317	ENDIF
318	IF ( .NOT. prandtl_layer ) THEN
319	WRITE( action, '(A)' ) 'prandtl_layer = .FALSE.'
320	ENDIF
321	IF ( action /= ' ' ) THEN
322	IF ( myid == 0 ) THEN
323	PRINT*, '+++ check_parameters:'
324	PRINT*, ' a non-flat topography does not allow ', TRIM( action )
325	ENDIF
326	CALL local_stop
327	ENDIF
328	ENDIF
329
330	!
331	!-- Check ocean setting
332	IF ( ocean ) THEN
333	action = ' '
334	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
335	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
336	ENDIF
337	IF ( momentum_advec == 'ups-scheme' ) THEN
338	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
339	ENDIF
340	IF ( action /= ' ' ) THEN
341	IF ( myid == 0 ) THEN
342	PRINT*, '+++ check_parameters:'
343	PRINT*, ' ocean = .T. does not allow ', TRIM( action )
344	ENDIF
345	CALL local_stop
346	ENDIF
347	ENDIF
348
349	!
350	!-- Check whether there are any illegal values
351	!-- Pressure solver:
352	IF ( psolver /= 'poisfft' .AND. psolver /= 'poisfft_hybrid' .AND. &
353	psolver /= 'sor' .AND. psolver /= 'multigrid' ) THEN
354	IF ( myid == 0 ) THEN
355	PRINT*, '+++ check_parameters:'
356	PRINT*, ' unknown solver for perturbation pressure: psolver=', &
357	psolver
358	ENDIF
359	CALL local_stop
360	ENDIF
361
362	#if defined( __parallel )
363	IF ( psolver == 'poisfft_hybrid' .AND. pdims(2) /= 1 ) THEN
364	IF ( myid == 0 ) THEN
365	PRINT*, '+++ check_parameters:'
366	PRINT*, ' psolver="', TRIM( psolver ), '" only works for a ', &
367	'1d domain-decomposition along x'
368	PRINT*, ' please do not set npey/=1 in the parameter file'
369	ENDIF
370	CALL local_stop
371	ENDIF
372	IF ( psolver == 'poisfft_hybrid' .AND. &
373	( nxra > nxr .OR. nyna > nyn .OR. nza > nz ) .OR. &
374	psolver == 'multigrid' .AND. &
375	( nxra > nxr .OR. nyna > nyn ) ) THEN
376	IF ( myid == 0 ) THEN
377	PRINT*, '+++ check_parameters:'
378	PRINT*, ' psolver="', TRIM( psolver ), '" does not work for ', &
379	'subdomains with unequal size'
380	PRINT*, ' please set grid_matching = ''strict'' in the parameter',&
381	' file'
382	ENDIF
383	CALL local_stop
384	ENDIF
385	#else
386	IF ( psolver == 'poisfft_hybrid' ) THEN
387	IF ( myid == 0 ) THEN
388	PRINT*, '+++ check_parameters:'
389	PRINT*, ' psolver="', TRIM( psolver ), '" only works for a ', &
390	'parallel environment'
391	ENDIF
392	CALL local_stop
393	ENDIF
394	#endif
395
396	IF ( psolver == 'multigrid' ) THEN
397	IF ( cycle_mg == 'w' ) THEN
398	gamma_mg = 2
399	ELSEIF ( cycle_mg == 'v' ) THEN
400	gamma_mg = 1
401	ELSE
402	IF ( myid == 0 ) THEN
403	PRINT*, '+++ check_parameters:'
404	PRINT*, ' unknown multigrid cycle: cycle_mg=', cycle_mg
405	ENDIF
406	CALL local_stop
407	ENDIF
408	ENDIF
409
410	IF ( fft_method /= 'singleton-algorithm' .AND. &
411	fft_method /= 'temperton-algorithm' .AND. &
412	fft_method /= 'system-specific' ) THEN
413	IF ( myid == 0 ) THEN
414	PRINT*, '+++ check_parameters:'
415	PRINT*, ' unknown fft-algorithm: fft_method=', fft_method
416	ENDIF
417	CALL local_stop
418	ENDIF
419
420	!
421	!-- Advection schemes:
422	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ups-scheme' ) &
423	THEN
424	IF ( myid == 0 ) PRINT*, '+++ check_parameters: unknown advection ', &
425	'scheme: momentum_advec=', momentum_advec
426	CALL local_stop
427	ENDIF
428	IF ( ( momentum_advec == 'ups-scheme' .OR. scalar_advec == 'ups-scheme' )&
429	.AND. timestep_scheme /= 'euler' ) THEN
430	IF ( myid == 0 ) PRINT*, '+++ check_parameters: momentum_advec=', &
431	momentum_advec, ' is not allowed with ', &
432	'timestep_scheme=', timestep_scheme
433	CALL local_stop
434	ENDIF
435
436	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'bc-scheme' .AND.&
437	scalar_advec /= 'ups-scheme' ) THEN
438	IF ( myid == 0 ) PRINT*, '+++ check_parameters: unknown advection ', &
439	'scheme: scalar_advec=', scalar_advec
440	CALL local_stop
441	ENDIF
442
443	IF ( use_sgs_for_particles .AND. .NOT. use_upstream_for_tke ) THEN
444	use_upstream_for_tke = .TRUE.
445	IF ( myid == 0 ) THEN
446	PRINT*, '+++ WARNING: check_parameters: use_upstream_for_tke set ', &
447	'.TRUE. because use_sgs_for_particles = .TRUE.'
448	ENDIF
449	ENDIF
450
451	IF ( use_upstream_for_tke .AND. timestep_scheme(1:8) == 'leapfrog' ) THEN
452	IF ( myid == 0 ) THEN
453	PRINT*, '+++ check_parameters: use_upstream_for_tke = .TRUE. ', &
454	'not allowed with timestep_scheme=', timestep_scheme
455	ENDIF
456	CALL local_stop
457	ENDIF
458
459	!
460	!-- Timestep schemes:
461	SELECT CASE ( TRIM( timestep_scheme ) )
462
463	CASE ( 'euler' )
464	intermediate_timestep_count_max = 1
465	asselin_filter_factor = 0.0
466
467	CASE ( 'leapfrog', 'leapfrog+euler' )
468	intermediate_timestep_count_max = 1
469
470	CASE ( 'runge-kutta-2' )
471	intermediate_timestep_count_max = 2
472	asselin_filter_factor = 0.0
473
474	CASE ( 'runge-kutta-3' )
475	intermediate_timestep_count_max = 3
476	asselin_filter_factor = 0.0
477
478	CASE DEFAULT
479	IF ( myid == 0 ) PRINT*, '+++ check_parameters: unknown timestep ',&
480	'scheme: timestep_scheme=', timestep_scheme
481	CALL local_stop
482
483	END SELECT
484
485	IF ( scalar_advec == 'ups-scheme' .AND. timestep_scheme(1:5) == 'runge' )&
486	THEN
487	IF ( myid == 0 ) THEN
488	PRINT*, '+++ check_parameters: scalar advection scheme "', &
489	TRIM( scalar_advec ), '"'
490	PRINT*, ' does not work with timestep_scheme "', &
491	TRIM( timestep_scheme ), '"'
492	ENDIF
493	CALL local_stop
494	ENDIF
495
496	IF ( momentum_advec /= 'pw-scheme' .AND. timestep_scheme(1:5) == 'runge' ) &
497	THEN
498	IF ( myid == 0 ) THEN
499	PRINT*, '+++ check_parameters: momentum advection scheme "', &
500	TRIM( momentum_advec ), '"'
501	PRINT*, ' does not work with timestep_scheme "', &
502	TRIM( timestep_scheme ), '"'
503	ENDIF
504	CALL local_stop
505	ENDIF
506
507
508	IF ( initializing_actions == ' ' ) THEN
509	IF ( myid == 0 ) THEN
510	PRINT*, '+++ check parameters:'
511	PRINT*, ' no value found for initializing_actions'
512	ENDIF
513	CALL local_stop
514	ENDIF
515
516	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
517	TRIM( initializing_actions ) /= 'read_data_for_recycling' ) THEN
518	!
519	!-- No model continuation run; several initialising actions are possible
520	action = initializing_actions
521	DO WHILE ( TRIM( action ) /= '' )
522	position = INDEX( action, ' ' )
523	SELECT CASE ( action(1:position-1) )
524
525	CASE ( 'set_constant_profiles', 'set_1d-model_profiles', &
526	'by_user', 'initialize_vortex', 'initialize_ptanom' )
527	action = action(position+1:)
528
529	CASE DEFAULT
530	IF ( myid == 0 ) PRINT*, '+++ check_parameters: initializi', &
531	'ng_action unkown or not allowed: action = "', &
532	TRIM(action), '"'
533	CALL local_stop
534
535	END SELECT
536	ENDDO
537	ENDIF
538	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
539	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
540	IF ( myid == 0 ) PRINT*, '+++ check_parameters: initializing_actions', &
541	'"set_constant_profiles" and "set_1d-model_profiles" are not', &
542	' allowed simultaneously'
543	CALL local_stop
544	ENDIF
545	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
546	INDEX( initializing_actions, 'by_user' ) /= 0 ) THEN
547	IF ( myid == 0 ) PRINT*, '+++ check_parameters: initializing_actions', &
548	'"set_constant_profiles" and "by_user" are not', &
549	' allowed simultaneously'
550	CALL local_stop
551	ENDIF
552	IF ( INDEX( initializing_actions, 'by_user' ) /= 0 .AND. &
553	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
554	IF ( myid == 0 ) PRINT*, '+++ check_parameters: initializing_actions', &
555	'"by_user" and "set_1d-model_profiles" are not', &
556	' allowed simultaneously'
557	CALL local_stop
558	ENDIF
559
560	IF ( cloud_physics .AND. .NOT. humidity ) THEN
561	IF ( myid == 0 ) PRINT*, '+++ check_parameters: cloud_physics =', &
562	cloud_physics, ' is not allowed with ', &
563	'humidity =', humidity
564	CALL local_stop
565	ENDIF
566
567	IF ( precipitation .AND. .NOT. cloud_physics ) THEN
568	IF ( myid == 0 ) PRINT*, '+++ check_parameters: precipitation =', &
569	precipitation, ' is not allowed with ', &
570	'cloud_physics =', cloud_physics
571	CALL local_stop
572	ENDIF
573
574	IF ( humidity .AND. sloping_surface ) THEN
575	IF ( myid == 0 ) PRINT*, '+++ check_parameters: humidity = TRUE', &
576	'and hang = TRUE are not', &
577	' allowed simultaneously'
578	CALL local_stop
579	ENDIF
580
581	IF ( humidity .AND. scalar_advec == 'ups-scheme' ) THEN
582	IF ( myid == 0 ) PRINT*, '+++ check_parameters: UPS-scheme', &
583	'is not implemented for humidity'
584	CALL local_stop
585	ENDIF
586
587	IF ( passive_scalar .AND. humidity ) THEN
588	IF ( myid == 0 ) PRINT*, '+++ check_parameters: humidity = TRUE and', &
589	'passive_scalar = TRUE is not allowed ', &
590	'simultaneously'
591	CALL local_stop
592	ENDIF
593
594	IF ( passive_scalar .AND. scalar_advec == 'ups-scheme' ) THEN
595	IF ( myid == 0 ) PRINT*, '+++ check_parameters: UPS-scheme', &
596	'is not implemented for passive_scalar'
597	CALL local_stop
598	ENDIF
599
600	IF ( grid_matching /= 'strict' .AND. grid_matching /= 'match' ) THEN
601	IF ( myid == 0 ) PRINT*, '+++ check_parameters: illegal value "', &
602	TRIM( grid_matching ), &
603	'" found for parameter grid_matching'
604	CALL local_stop
605	ENDIF
606
607	IF ( plant_canopy .AND. ( drag_coefficient == 0.0 ) ) THEN
608	IF ( myid == 0 ) PRINT*, '+++ check_parameters: plant_canopy = TRUE', &
609	'requires a non-zero drag_coefficient'
610	CALL local_stop
611	ENDIF
612
613	!
614	!-- In case of no model continuation run, check initialising parameters and
615	!-- deduce further quantities
616	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
617
618	!
619	!-- Initial profiles for 1D and 3D model, respectively
620	u_init = ug_surface
621	v_init = vg_surface
622	pt_init = pt_surface
623	IF ( humidity ) q_init = q_surface
624	IF ( ocean ) sa_init = sa_surface
625	IF ( passive_scalar ) q_init = s_surface
626	IF ( plant_canopy ) lad = 0.0
627
628	!
629	!--
630	!-- If required, compute initial profile of the geostrophic wind
631	!-- (component ug)
632	i = 1
633	gradient = 0.0
634
635	IF ( .NOT. ocean ) THEN
636
637	ug_vertical_gradient_level_ind(1) = 0
638	ug(0) = ug_surface
639	DO k = 1, nzt+1
640	IF ( i < 11 ) THEN
641	IF ( ug_vertical_gradient_level(i) < zu(k) .AND. &
642	ug_vertical_gradient_level(i) >= 0.0 ) THEN
643	gradient = ug_vertical_gradient(i) / 100.0
644	ug_vertical_gradient_level_ind(i) = k - 1
645	i = i + 1
646	ENDIF
647	ENDIF
648	IF ( gradient /= 0.0 ) THEN
649	IF ( k /= 1 ) THEN
650	ug(k) = ug(k-1) + dzu(k) * gradient
651	ELSE
652	ug(k) = ug_surface + 0.5 * dzu(k) * gradient
653	ENDIF
654	ELSE
655	ug(k) = ug(k-1)
656	ENDIF
657	ENDDO
658
659	ELSE
660
661	ug_vertical_gradient_level_ind(1) = nzt+1
662	ug(nzt+1) = ug_surface
663	DO k = nzt, 0, -1
664	IF ( i < 11 ) THEN
665	IF ( ug_vertical_gradient_level(i) > zu(k) .AND. &
666	ug_vertical_gradient_level(i) <= 0.0 ) THEN
667	gradient = ug_vertical_gradient(i) / 100.0
668	ug_vertical_gradient_level_ind(i) = k + 1
669	i = i + 1
670	ENDIF
671	ENDIF
672	IF ( gradient /= 0.0 ) THEN
673	IF ( k /= nzt ) THEN
674	ug(k) = ug(k+1) - dzu(k+1) * gradient
675	ELSE
676	ug(k) = ug_surface - 0.5 * dzu(k+1) * gradient
677	ug(k+1) = ug_surface + 0.5 * dzu(k+1) * gradient
678	ENDIF
679	ELSE
680	ug(k) = ug(k+1)
681	ENDIF
682	ENDDO
683
684	ENDIF
685
686	u_init = ug
687
688	!
689	!-- In case of no given gradients for ug, choose a vanishing gradient
690	IF ( ug_vertical_gradient_level(1) == -9999999.9 ) THEN
691	ug_vertical_gradient_level(1) = 0.0
692	ENDIF
693
694	!
695	!--
696	!-- If required, compute initial profile of the geostrophic wind
697	!-- (component vg)
698	i = 1
699	gradient = 0.0
700
701	IF ( .NOT. ocean ) THEN
702
703	vg_vertical_gradient_level_ind(1) = 0
704	vg(0) = vg_surface
705	DO k = 1, nzt+1
706	IF ( i < 11 ) THEN
707	IF ( vg_vertical_gradient_level(i) < zu(k) .AND. &
708	vg_vertical_gradient_level(i) >= 0.0 ) THEN
709	gradient = vg_vertical_gradient(i) / 100.0
710	vg_vertical_gradient_level_ind(i) = k - 1
711	i = i + 1
712	ENDIF
713	ENDIF
714	IF ( gradient /= 0.0 ) THEN
715	IF ( k /= 1 ) THEN
716	vg(k) = vg(k-1) + dzu(k) * gradient
717	ELSE
718	vg(k) = vg_surface + 0.5 * dzu(k) * gradient
719	ENDIF
720	ELSE
721	vg(k) = vg(k-1)
722	ENDIF
723	ENDDO
724
725	ELSE
726
727	vg_vertical_gradient_level_ind(1) = nzt+1
728	vg(nzt+1) = vg_surface
729	DO k = nzt, 0, -1
730	IF ( i < 11 ) THEN
731	IF ( vg_vertical_gradient_level(i) > zu(k) .AND. &
732	vg_vertical_gradient_level(i) <= 0.0 ) THEN
733	gradient = vg_vertical_gradient(i) / 100.0
734	vg_vertical_gradient_level_ind(i) = k + 1
735	i = i + 1
736	ENDIF
737	ENDIF
738	IF ( gradient /= 0.0 ) THEN
739	IF ( k /= nzt ) THEN
740	vg(k) = vg(k+1) - dzu(k+1) * gradient
741	ELSE
742	vg(k) = vg_surface - 0.5 * dzu(k+1) * gradient
743	vg(k+1) = vg_surface + 0.5 * dzu(k+1) * gradient
744	ENDIF
745	ELSE
746	vg(k) = vg(k+1)
747	ENDIF
748	ENDDO
749
750	ENDIF
751
752	v_init = vg
753
754	!
755	!-- In case of no given gradients for vg, choose a vanishing gradient
756	IF ( vg_vertical_gradient_level(1) == -9999999.9 ) THEN
757	vg_vertical_gradient_level(1) = 0.0
758	ENDIF
759
760	!
761	!-- Compute initial temperature profile using the given temperature gradients
762	i = 1
763	gradient = 0.0
764
765	IF ( .NOT. ocean ) THEN
766
767	pt_vertical_gradient_level_ind(1) = 0
768	DO k = 1, nzt+1
769	IF ( i < 11 ) THEN
770	IF ( pt_vertical_gradient_level(i) < zu(k) .AND. &
771	pt_vertical_gradient_level(i) >= 0.0 ) THEN
772	gradient = pt_vertical_gradient(i) / 100.0
773	pt_vertical_gradient_level_ind(i) = k - 1
774	i = i + 1
775	ENDIF
776	ENDIF
777	IF ( gradient /= 0.0 ) THEN
778	IF ( k /= 1 ) THEN
779	pt_init(k) = pt_init(k-1) + dzu(k) * gradient
780	ELSE
781	pt_init(k) = pt_surface + 0.5 * dzu(k) * gradient
782	ENDIF
783	ELSE
784	pt_init(k) = pt_init(k-1)
785	ENDIF
786	ENDDO
787
788	ELSE
789
790	pt_vertical_gradient_level_ind(1) = nzt+1
791	DO k = nzt, 0, -1
792	IF ( i < 11 ) THEN
793	IF ( pt_vertical_gradient_level(i) > zu(k) .AND. &
794	pt_vertical_gradient_level(i) <= 0.0 ) THEN
795	gradient = pt_vertical_gradient(i) / 100.0
796	pt_vertical_gradient_level_ind(i) = k + 1
797	i = i + 1
798	ENDIF
799	ENDIF
800	IF ( gradient /= 0.0 ) THEN
801	IF ( k /= nzt ) THEN
802	pt_init(k) = pt_init(k+1) - dzu(k+1) * gradient
803	ELSE
804	pt_init(k) = pt_surface - 0.5 * dzu(k+1) * gradient
805	pt_init(k+1) = pt_surface + 0.5 * dzu(k+1) * gradient
806	ENDIF
807	ELSE
808	pt_init(k) = pt_init(k+1)
809	ENDIF
810	ENDDO
811
812	ENDIF
813
814	!
815	!-- In case of no given temperature gradients, choose gradient of neutral
816	!-- stratification
817	IF ( pt_vertical_gradient_level(1) == -9999999.9 ) THEN
818	pt_vertical_gradient_level(1) = 0.0
819	ENDIF
820
821	!
822	!-- Store temperature gradient at the top boundary for possible Neumann
823	!-- boundary condition
824	bc_pt_t_val = ( pt_init(nzt+1) - pt_init(nzt) ) / dzu(nzt+1)
825
826	!
827	!-- If required, compute initial humidity or scalar profile using the given
828	!-- humidity/scalar gradient. In case of scalar transport, initially store
829	!-- values of the scalar parameters on humidity parameters
830	IF ( passive_scalar ) THEN
831	bc_q_b = bc_s_b
832	bc_q_t = bc_s_t
833	q_surface = s_surface
834	q_surface_initial_change = s_surface_initial_change
835	q_vertical_gradient = s_vertical_gradient
836	q_vertical_gradient_level = s_vertical_gradient_level
837	surface_waterflux = surface_scalarflux
838	ENDIF
839
840	IF ( humidity .OR. passive_scalar ) THEN
841
842	i = 1
843	gradient = 0.0
844	q_vertical_gradient_level_ind(1) = 0
845	DO k = 1, nzt+1
846	IF ( i < 11 ) THEN
847	IF ( q_vertical_gradient_level(i) < zu(k) .AND. &
848	q_vertical_gradient_level(i) >= 0.0 ) THEN
849	gradient = q_vertical_gradient(i) / 100.0
850	q_vertical_gradient_level_ind(i) = k - 1
851	i = i + 1
852	ENDIF
853	ENDIF
854	IF ( gradient /= 0.0 ) THEN
855	IF ( k /= 1 ) THEN
856	q_init(k) = q_init(k-1) + dzu(k) * gradient
857	ELSE
858	q_init(k) = q_init(k-1) + 0.5 * dzu(k) * gradient
859	ENDIF
860	ELSE
861	q_init(k) = q_init(k-1)
862	ENDIF
863	!
864	!-- Avoid negative humidities
865	IF ( q_init(k) < 0.0 ) THEN
866	q_init(k) = 0.0
867	ENDIF
868	ENDDO
869
870	!
871	!-- In case of no given humidity gradients, choose zero gradient
872	!-- conditions
873	IF ( q_vertical_gradient_level(1) == -1.0 ) THEN
874	q_vertical_gradient_level(1) = 0.0
875	ENDIF
876
877	!
878	!-- Store humidity gradient at the top boundary for possile Neumann
879	!-- boundary condition
880	bc_q_t_val = ( q_init(nzt+1) - q_init(nzt) ) / dzu(nzt+1)
881
882	ENDIF
883
884	!
885	!-- If required, compute initial salinity profile using the given salinity
886	!-- gradients
887	IF ( ocean ) THEN
888
889	i = 1
890	gradient = 0.0
891
892	sa_vertical_gradient_level_ind(1) = nzt+1
893	DO k = nzt, 0, -1
894	IF ( i < 11 ) THEN
895	IF ( sa_vertical_gradient_level(i) > zu(k) .AND. &
896	sa_vertical_gradient_level(i) <= 0.0 ) THEN
897	gradient = sa_vertical_gradient(i) / 100.0
898	sa_vertical_gradient_level_ind(i) = k + 1
899	i = i + 1
900	ENDIF
901	ENDIF
902	IF ( gradient /= 0.0 ) THEN
903	IF ( k /= nzt ) THEN
904	sa_init(k) = sa_init(k+1) - dzu(k+1) * gradient
905	ELSE
906	sa_init(k) = sa_surface - 0.5 * dzu(k+1) * gradient
907	sa_init(k+1) = sa_surface + 0.5 * dzu(k+1) * gradient
908	ENDIF
909	ELSE
910	sa_init(k) = sa_init(k+1)
911	ENDIF
912	ENDDO
913
914	ENDIF
915
916	!
917	!-- If required compute the profile of leaf area density used in the plant canopy model
918	IF ( plant_canopy ) THEN
919
920	i = 1
921	gradient = 0.0
922
923	IF ( .NOT. ocean ) THEN
924
925	lad(0) = lad_surface
926
927	lad_vertical_gradient_level_ind(1) = 0
928	DO k = 1, pch_index
929	IF ( i < 11 ) THEN
930	IF ( lad_vertical_gradient_level(i) < zu(k) .AND. &
931	lad_vertical_gradient_level(i) >= 0.0 ) THEN
932	gradient = lad_vertical_gradient(i)
933	lad_vertical_gradient_level_ind(i) = k - 1
934	i = i + 1
935	ENDIF
936	ENDIF
937	IF ( gradient /= 0.0 ) THEN
938	IF ( k /= 1 ) THEN
939	lad(k) = lad(k-1) + dzu(k) * gradient
940	ELSE
941	lad(k) = lad_surface + 0.5 * dzu(k) *gradient
942	ENDIF
943	ELSE
944	lad(k) = lad(k-1)
945	ENDIF
946	ENDDO
947
948	ENDIF
949
950	!
951	!-- In case of no given leaf area density gradients, choose a vanishing gradient
952	IF ( lad_vertical_gradient_level(1) == -9999999.9 ) THEN
953	lad_vertical_gradient_level(1) = 0.0
954	ENDIF
955
956	ENDIF
957
958	ENDIF
959
960	!
961	!-- Compute Coriolis parameter
962	f = 2.0 * omega * SIN( phi / 180.0 * pi )
963	fs = 2.0 * omega * COS( phi / 180.0 * pi )
964
965	!
966	!-- Ocean runs always use reference values in the buoyancy term. Therefore
967	!-- set the reference temperature equal to the surface temperature.
968	IF ( ocean .AND. pt_reference == 9999999.9 ) pt_reference = pt_surface
969
970	!
971	!-- Reference value has to be used in buoyancy terms
972	IF ( pt_reference /= 9999999.9 ) use_reference = .TRUE.
973
974	!
975	!-- Sign of buoyancy/stability terms
976	IF ( ocean ) atmos_ocean_sign = -1.0
977
978	!
979	!-- Ocean version must use flux boundary conditions at the top
980	IF ( ocean .AND. .NOT. use_top_fluxes ) THEN
981	IF ( myid == 0 ) PRINT*, '+++ check_parameters: use_top_fluxes ',&
982	'must be .TRUE. in ocean version'
983	CALL local_stop
984	ENDIF
985
986	!
987	!-- In case of a given slope, compute the relevant quantities
988	IF ( alpha_surface /= 0.0 ) THEN
989	IF ( ABS( alpha_surface ) > 90.0 ) THEN
990	IF ( myid == 0 ) PRINT*, '+++ check_parameters: ABS( alpha_surface',&
991	'=', alpha_surface, ' ) must be < 90.0'
992	CALL local_stop
993	ENDIF
994	sloping_surface = .TRUE.
995	cos_alpha_surface = COS( alpha_surface / 180.0 * pi )
996	sin_alpha_surface = SIN( alpha_surface / 180.0 * pi )
997	ENDIF
998
999	!
1000	!-- Check time step and cfl_factor
1001	IF ( dt /= -1.0 ) THEN
1002	IF ( dt <= 0.0 .AND. dt /= -1.0 ) THEN
1003	IF ( myid == 0 ) PRINT*, '+++ check_parameters: dt=', dt, ' <= 0.0'
1004	CALL local_stop
1005	ENDIF
1006	dt_3d = dt
1007	dt_fixed = .TRUE.
1008	ENDIF
1009
1010	IF ( cfl_factor <= 0.0 .OR. cfl_factor > 1.0 ) THEN
1011	IF ( cfl_factor == -1.0 ) THEN
1012	IF ( momentum_advec == 'ups-scheme' .OR. &
1013	scalar_advec == 'ups-scheme' ) THEN
1014	cfl_factor = 0.8
1015	ELSE
1016	IF ( timestep_scheme == 'runge-kutta-2' ) THEN
1017	cfl_factor = 0.8
1018	ELSEIF ( timestep_scheme == 'runge-kutta-3' ) THEN
1019	cfl_factor = 0.9
1020	ELSE
1021	cfl_factor = 0.1
1022	ENDIF
1023	ENDIF
1024	ELSE
1025	IF ( myid == 0 ) THEN
1026	PRINT*, '+++ check_parameters: cfl_factor=', cfl_factor, &
1027	' out of range'
1028	PRINT*, '+++ 0.0 < cfl_factor <= 1.0 is required'
1029	ENDIF
1030	CALL local_stop
1031	ENDIF
1032	ENDIF
1033
1034	!
1035	!-- Store simulated time at begin
1036	simulated_time_at_begin = simulated_time
1037
1038	!
1039	!-- Set wind speed in the Galilei-transformed system
1040	IF ( galilei_transformation ) THEN
1041	IF ( use_ug_for_galilei_tr .AND. &
1042	ug_vertical_gradient_level(1) == 0.0 .AND. &
1043	vg_vertical_gradient_level(1) == 0.0 ) THEN
1044	u_gtrans = ug_surface
1045	v_gtrans = vg_surface
1046	ELSEIF ( use_ug_for_galilei_tr .AND. &
1047	ug_vertical_gradient_level(1) /= 0.0 ) THEN
1048	IF ( myid == 0 ) THEN
1049	PRINT*, '+++ check_parameters:'
1050	PRINT*, ' baroclinicity (ug) not allowed'
1051	PRINT*, ' simultaneously with galilei transformation'
1052	ENDIF
1053	CALL local_stop
1054	ELSEIF ( use_ug_for_galilei_tr .AND. &
1055	vg_vertical_gradient_level(1) /= 0.0 ) THEN
1056	IF ( myid == 0 ) THEN
1057	PRINT*, '+++ check_parameters:'
1058	PRINT*, ' baroclinicity (vg) not allowed'
1059	PRINT*, ' simultaneously with galilei transformation'
1060	ENDIF
1061	CALL local_stop
1062	ELSE
1063	IF ( myid == 0 ) THEN
1064	PRINT*, '+++ WARNING: check_parameters:'
1065	PRINT*, ' variable translation speed used for galilei-tran' // &
1066	'sformation, which'
1067	PRINT*, ' may cause instabilities in stably stratified regions'
1068	ENDIF
1069	ENDIF
1070	ENDIF
1071
1072	!
1073	!-- In case of using a prandtl-layer, calculated (or prescribed) surface
1074	!-- fluxes have to be used in the diffusion-terms
1075	IF ( prandtl_layer ) use_surface_fluxes = .TRUE.
1076
1077	!
1078	!-- Check boundary conditions and set internal variables:
1079	!-- Lateral boundary conditions
1080	IF ( bc_lr /= 'cyclic' .AND. bc_lr /= 'dirichlet/radiation' .AND. &
1081	bc_lr /= 'radiation/dirichlet' ) THEN
1082	IF ( myid == 0 ) THEN
1083	PRINT*, '+++ check_parameters:'
1084	PRINT*, ' unknown boundary condition: bc_lr = ', bc_lr
1085	ENDIF
1086	CALL local_stop
1087	ENDIF
1088	IF ( bc_ns /= 'cyclic' .AND. bc_ns /= 'dirichlet/radiation' .AND. &
1089	bc_ns /= 'radiation/dirichlet' ) THEN
1090	IF ( myid == 0 ) THEN
1091	PRINT*, '+++ check_parameters:'
1092	PRINT*, ' unknown boundary condition: bc_ns = ', bc_ns
1093	ENDIF
1094	CALL local_stop
1095	ENDIF
1096
1097	!
1098	!-- Non-cyclic lateral boundaries require the multigrid method and Piascek-
1099	!-- Willimas advection scheme. Several schemes and tools do not work with
1100	!-- non-cyclic boundary conditions.
1101	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
1102	IF ( psolver /= 'multigrid' ) THEN
1103	IF ( myid == 0 ) THEN
1104	PRINT*, '+++ check_parameters:'
1105	PRINT*, ' non-cyclic lateral boundaries do not allow', &
1106	' psolver = ', psolver
1107	ENDIF
1108	CALL local_stop
1109	ENDIF
1110	IF ( momentum_advec /= 'pw-scheme' ) THEN
1111	IF ( myid == 0 ) THEN
1112	PRINT*, '+++ check_parameters:'
1113	PRINT*, ' non-cyclic lateral boundaries do not allow', &
1114	' momentum_advec = ', momentum_advec
1115	ENDIF
1116	CALL local_stop
1117	ENDIF
1118	IF ( scalar_advec /= 'pw-scheme' ) THEN
1119	IF ( myid == 0 ) THEN
1120	PRINT*, '+++ check_parameters:'
1121	PRINT*, ' non-cyclic lateral boundaries do not allow', &
1122	' scalar_advec = ', scalar_advec
1123	ENDIF
1124	CALL local_stop
1125	ENDIF
1126	IF ( galilei_transformation ) THEN
1127	IF ( myid == 0 ) THEN
1128	PRINT*, '+++ check_parameters:'
1129	PRINT*, ' non-cyclic lateral boundaries do not allow', &
1130	' galilei_transformation = .T.'
1131	ENDIF
1132	CALL local_stop
1133	ENDIF
1134	! IF ( conserve_volume_flow ) THEN
1135	! IF ( myid == 0 ) THEN
1136	! PRINT*, '+++ check_parameters:'
1137	! PRINT*, ' non-cyclic lateral boundaries do not allow', &
1138	! ' conserve_volume_flow = .T.'
1139	! ENDIF
1140	! CALL local_stop
1141	! ENDIF
1142	ENDIF
1143
1144	!
1145	!-- Bottom boundary condition for the turbulent Kinetic energy
1146	IF ( bc_e_b == 'neumann' ) THEN
1147	ibc_e_b = 1
1148	IF ( adjust_mixing_length .AND. prandtl_layer ) THEN
1149	IF ( myid == 0 ) THEN
1150	PRINT*, '+++ WARNING: check_parameters:'
1151	PRINT*, ' adjust_mixing_length = TRUE and bc_e_b = ', bc_e_b
1152	ENDIF
1153	ENDIF
1154	ELSEIF ( bc_e_b == '(u)*2+neumann' ) THEN
1155	ibc_e_b = 2
1156	IF ( .NOT. adjust_mixing_length .AND. prandtl_layer ) THEN
1157	IF ( myid == 0 ) THEN
1158	PRINT*, '+++ WARNING: check_parameters:'
1159	PRINT*, ' adjust_mixing_length = FALSE and bc_e_b = ', bc_e_b
1160	ENDIF
1161	ENDIF
1162	IF ( .NOT. prandtl_layer ) THEN
1163	bc_e_b = 'neumann'
1164	ibc_e_b = 1
1165	IF ( myid == 0 ) THEN
1166	PRINT*, '+++ WARNING: check_parameters:'
1167	PRINT*, ' boundary condition bc_e_b changed to "', bc_e_b, '"'
1168	ENDIF
1169	ENDIF
1170	ELSE
1171	IF ( myid == 0 ) THEN
1172	PRINT*, '+++ check_parameters:'
1173	PRINT*, ' unknown boundary condition: bc_e_b = ', bc_e_b
1174	ENDIF
1175	CALL local_stop
1176	ENDIF
1177
1178	!
1179	!-- Boundary conditions for perturbation pressure
1180	IF ( bc_p_b == 'dirichlet' ) THEN
1181	ibc_p_b = 0
1182	ELSEIF ( bc_p_b == 'neumann' ) THEN
1183	ibc_p_b = 1
1184	ELSEIF ( bc_p_b == 'neumann+inhomo' ) THEN
1185	ibc_p_b = 2
1186	ELSE
1187	IF ( myid == 0 ) THEN
1188	PRINT*, '+++ check_parameters:'
1189	PRINT*, ' unknown boundary condition: bc_p_b = ', bc_p_b
1190	ENDIF
1191	CALL local_stop
1192	ENDIF
1193	IF ( ibc_p_b == 2 .AND. .NOT. prandtl_layer ) THEN
1194	IF ( myid == 0 ) THEN
1195	PRINT*, '+++ check_parameters:'
1196	PRINT*, ' boundary condition: bc_p_b = ', TRIM( bc_p_b ), &
1197	' not allowed with'
1198	PRINT*, ' prandtl_layer = .FALSE.'
1199	ENDIF
1200	CALL local_stop
1201	ENDIF
1202	IF ( bc_p_t == 'dirichlet' ) THEN
1203	ibc_p_t = 0
1204	ELSEIF ( bc_p_t == 'neumann' ) THEN
1205	ibc_p_t = 1
1206	ELSE
1207	IF ( myid == 0 ) THEN
1208	PRINT*, '+++ check_parameters:'
1209	PRINT*, ' unknown boundary condition: bc_p_t = ', bc_p_t
1210	ENDIF
1211	CALL local_stop
1212	ENDIF
1213
1214	!
1215	!-- Boundary conditions for potential temperature
1216	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
1217	ibc_pt_b = 2
1218	ELSE
1219	IF ( bc_pt_b == 'dirichlet' ) THEN
1220	ibc_pt_b = 0
1221	ELSEIF ( bc_pt_b == 'neumann' ) THEN
1222	ibc_pt_b = 1
1223	ELSE
1224	IF ( myid == 0 ) THEN
1225	PRINT*, '+++ check_parameters:'
1226	PRINT*, ' unknown boundary condition: bc_pt_b = ', bc_pt_b
1227	ENDIF
1228	CALL local_stop
1229	ENDIF
1230	ENDIF
1231
1232	IF ( bc_pt_t == 'dirichlet' ) THEN
1233	ibc_pt_t = 0
1234	ELSEIF ( bc_pt_t == 'neumann' ) THEN
1235	ibc_pt_t = 1
1236	ELSEIF ( bc_pt_t == 'initial_gradient' ) THEN
1237	ibc_pt_t = 2
1238	ELSE
1239	IF ( myid == 0 ) THEN
1240	PRINT*, '+++ check_parameters:'
1241	PRINT*, ' unknown boundary condition: bc_pt_t = ', bc_pt_t
1242	ENDIF
1243	CALL local_stop
1244	ENDIF
1245
1246	IF ( surface_heatflux == 9999999.9 ) constant_heatflux = .FALSE.
1247	IF ( top_heatflux == 9999999.9 ) constant_top_heatflux = .FALSE.
1248	IF ( top_momentumflux_u /= 9999999.9 .AND. &
1249	top_momentumflux_v /= 9999999.9 ) THEN
1250	constant_top_momentumflux = .TRUE.
1251	ELSEIF ( .NOT. ( top_momentumflux_u == 9999999.9 .AND. &
1252	top_momentumflux_v == 9999999.9 ) ) THEN
1253	IF ( myid == 0 ) THEN
1254	PRINT*, '+++ check_parameters:'
1255	PRINT*, ' both, top_momentumflux_u AND top_momentumflux_v'
1256	PRINT*, ' must be set'
1257	ENDIF
1258	CALL local_stop
1259	ENDIF
1260
1261	!
1262	!-- A given surface temperature implies Dirichlet boundary condition for
1263	!-- temperature. In this case specification of a constant heat flux is
1264	!-- forbidden.
1265	IF ( ibc_pt_b == 0 .AND. constant_heatflux .AND. &
1266	surface_heatflux /= 0.0 ) THEN
1267	IF ( myid == 0 ) THEN
1268	PRINT*, '+++ check_parameters:'
1269	PRINT*, ' boundary_condition: bc_pt_b = ', bc_pt_b
1270	PRINT*, ' is not allowed with constant_heatflux = .TRUE.'
1271	ENDIF
1272	CALL local_stop
1273	ENDIF
1274	IF ( constant_heatflux .AND. pt_surface_initial_change /= 0.0 ) THEN
1275	IF ( myid == 0 ) THEN
1276	PRINT*, '+++ check_parameters: constant_heatflux = .TRUE. is not'
1277	PRINT*, ' allowed with pt_surface_initial_change (/=0) = ', &
1278	pt_surface_initial_change
1279	ENDIF
1280	CALL local_stop
1281	ENDIF
1282
1283	!
1284	!-- A given temperature at the top implies Dirichlet boundary condition for
1285	!-- temperature. In this case specification of a constant heat flux is
1286	!-- forbidden.
1287	IF ( ibc_pt_t == 0 .AND. constant_top_heatflux .AND. &
1288	top_heatflux /= 0.0 ) THEN
1289	IF ( myid == 0 ) THEN
1290	PRINT*, '+++ check_parameters:'
1291	PRINT*, ' boundary_condition: bc_pt_t = ', bc_pt_t
1292	PRINT*, ' is not allowed with constant_top_heatflux = .TRUE.'
1293	ENDIF
1294	CALL local_stop
1295	ENDIF
1296
1297	!
1298	!-- Boundary conditions for salinity
1299	IF ( ocean ) THEN
1300	IF ( bc_sa_t == 'dirichlet' ) THEN
1301	ibc_sa_t = 0
1302	ELSEIF ( bc_sa_t == 'neumann' ) THEN
1303	ibc_sa_t = 1
1304	ELSE
1305	IF ( myid == 0 ) THEN
1306	PRINT*, '+++ check_parameters:'
1307	PRINT*, ' unknown boundary condition: bc_sa_t = ', bc_sa_t
1308	ENDIF
1309	CALL local_stop
1310	ENDIF
1311
1312	IF ( top_salinityflux == 9999999.9 ) constant_top_salinityflux = .FALSE.
1313	IF ( ibc_sa_t == 1 .AND. top_salinityflux == 9999999.9 ) THEN
1314	IF ( myid == 0 ) THEN
1315	PRINT*, '+++ check_parameters:'
1316	PRINT*, ' boundary_condition: bc_sa_t = ', bc_sa_t
1317	PRINT*, ' requires to set top_salinityflux '
1318	ENDIF
1319	CALL local_stop
1320	ENDIF
1321
1322	!
1323	!-- A fixed salinity at the top implies Dirichlet boundary condition for
1324	!-- salinity. In this case specification of a constant salinity flux is
1325	!-- forbidden.
1326	IF ( ibc_sa_t == 0 .AND. constant_top_salinityflux .AND. &
1327	top_salinityflux /= 0.0 ) THEN
1328	IF ( myid == 0 ) THEN
1329	PRINT*, '+++ check_parameters:'
1330	PRINT*, ' boundary_condition: bc_sa_t = ', bc_sa_t
1331	PRINT*, ' is not allowed with constant_top_salinityflux = ', &
1332	'.TRUE.'
1333	ENDIF
1334	CALL local_stop
1335	ENDIF
1336
1337	ENDIF
1338
1339	!
1340	!-- In case of humidity or passive scalar, set boundary conditions for total
1341	!-- water content / scalar
1342	IF ( humidity .OR. passive_scalar ) THEN
1343	IF ( humidity ) THEN
1344	sq = 'q'
1345	ELSE
1346	sq = 's'
1347	ENDIF
1348	IF ( bc_q_b == 'dirichlet' ) THEN
1349	ibc_q_b = 0
1350	ELSEIF ( bc_q_b == 'neumann' ) THEN
1351	ibc_q_b = 1
1352	ELSE
1353	IF ( myid == 0 ) THEN
1354	PRINT*, '+++ check_parameters:'
1355	PRINT*, ' unknown boundary condition: bc_', sq, '_b = ', bc_q_b
1356	ENDIF
1357	CALL local_stop
1358	ENDIF
1359	IF ( bc_q_t == 'dirichlet' ) THEN
1360	ibc_q_t = 0
1361	ELSEIF ( bc_q_t == 'neumann' ) THEN
1362	ibc_q_t = 1
1363	ELSE
1364	IF ( myid == 0 ) THEN
1365	PRINT*, '+++ check_parameters:'
1366	PRINT*, ' unknown boundary condition: bc_', sq, '_t = ', bc_q_t
1367	ENDIF
1368	CALL local_stop
1369	ENDIF
1370
1371	IF ( surface_waterflux == 0.0 ) constant_waterflux = .FALSE.
1372
1373	!
1374	!-- A given surface humidity implies Dirichlet boundary condition for
1375	!-- humidity. In this case specification of a constant water flux is
1376	!-- forbidden.
1377	IF ( ibc_q_b == 0 .AND. constant_waterflux ) THEN
1378	IF ( myid == 0 ) THEN
1379	PRINT*, '+++ check_parameters:'
1380	PRINT*, ' boundary_condition: bc_', sq, '_b = ', bc_q_b
1381	PRINT*, ' is not allowed with prescribed surface flux'
1382	ENDIF
1383	CALL local_stop
1384	ENDIF
1385	IF ( constant_waterflux .AND. q_surface_initial_change /= 0.0 ) THEN
1386	IF ( myid == 0 ) THEN
1387	PRINT*, '+++ check_parameters: a prescribed surface flux is not'
1388	PRINT*, ' allowed with ', sq, '_surface_initial_change (/=0)', &
1389	' = ', q_surface_initial_change
1390	ENDIF
1391	CALL local_stop
1392	ENDIF
1393
1394	ENDIF
1395
1396	!
1397	!-- Boundary conditions for horizontal components of wind speed
1398	IF ( bc_uv_b == 'dirichlet' ) THEN
1399	ibc_uv_b = 0
1400	ELSEIF ( bc_uv_b == 'neumann' ) THEN
1401	ibc_uv_b = 1
1402	IF ( prandtl_layer ) THEN
1403	IF ( myid == 0 ) THEN
1404	PRINT*, '+++ check_parameters:'
1405	PRINT*, ' boundary condition: bc_uv_b = ', TRIM( bc_uv_b ), &
1406	' is not allowed with'
1407	PRINT*, ' prandtl_layer = .TRUE.'
1408	ENDIF
1409	CALL local_stop
1410	ENDIF
1411	ELSE
1412	IF ( myid == 0 ) THEN
1413	PRINT*, '+++ check_parameters:'
1414	PRINT*, ' unknown boundary condition: bc_uv_b = ', bc_uv_b
1415	ENDIF
1416	CALL local_stop
1417	ENDIF
1418	IF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
1419	bc_uv_t = 'neumann'
1420	ibc_uv_t = 1
1421	ELSE
1422	IF ( bc_uv_t == 'dirichlet' .OR. bc_uv_t == 'dirichlet_0' ) THEN
1423	ibc_uv_t = 0
1424	ELSEIF ( bc_uv_t == 'neumann' ) THEN
1425	ibc_uv_t = 1
1426	ELSE
1427	IF ( myid == 0 ) THEN
1428	PRINT*, '+++ check_parameters:'
1429	PRINT*, ' unknown boundary condition: bc_uv_t = ', bc_uv_t
1430	ENDIF
1431	CALL local_stop
1432	ENDIF
1433	ENDIF
1434
1435	!
1436	!-- Compute and check, respectively, the Rayleigh Damping parameter
1437	IF ( rayleigh_damping_factor == -1.0 ) THEN
1438	IF ( momentum_advec == 'ups-scheme' ) THEN
1439	rayleigh_damping_factor = 0.01
1440	ELSE
1441	rayleigh_damping_factor = 0.0
1442	ENDIF
1443	ELSE
1444	IF ( rayleigh_damping_factor < 0.0 .OR. rayleigh_damping_factor > 1.0 ) &
1445	THEN
1446	IF ( myid == 0 ) THEN
1447	PRINT*, '+++ check_parameters:'
1448	PRINT*, ' rayleigh_damping_factor = ', rayleigh_damping_factor,&
1449	' out of range [0.0,1.0]'
1450	ENDIF
1451	CALL local_stop
1452	ENDIF
1453	ENDIF
1454
1455	IF ( rayleigh_damping_height == -1.0 ) THEN
1456	IF ( .NOT. ocean ) THEN
1457	rayleigh_damping_height = 0.66666666666 * zu(nzt)
1458	ELSE
1459	rayleigh_damping_height = 0.66666666666 * zu(nzb)
1460	ENDIF
1461	ELSE
1462	IF ( .NOT. ocean ) THEN
1463	IF ( rayleigh_damping_height < 0.0 .OR. &
1464	rayleigh_damping_height > zu(nzt) ) THEN
1465	IF ( myid == 0 ) THEN
1466	PRINT*, '+++ check_parameters:'
1467	PRINT*, ' rayleigh_damping_height = ', rayleigh_damping_height,&
1468	' out of range [0.0,', zu(nzt), ']'
1469	ENDIF
1470	CALL local_stop
1471	ENDIF
1472	ELSE
1473	IF ( rayleigh_damping_height > 0.0 .OR. &
1474	rayleigh_damping_height < zu(nzb) ) THEN
1475	IF ( myid == 0 ) THEN
1476	PRINT*, '+++ check_parameters:'
1477	PRINT*, ' rayleigh_damping_height = ', rayleigh_damping_height,&
1478	' out of range [0.0,', zu(nzb), ']'
1479	ENDIF
1480	CALL local_stop
1481	ENDIF
1482	ENDIF
1483	ENDIF
1484
1485	!
1486	!-- Check limiters for Upstream-Spline scheme
1487	IF ( overshoot_limit_u < 0.0 .OR. overshoot_limit_v < 0.0 .OR. &
1488	overshoot_limit_w < 0.0 .OR. overshoot_limit_pt < 0.0 .OR. &
1489	overshoot_limit_e < 0.0 ) THEN
1490	IF ( myid == 0 ) THEN
1491	PRINT*, '+++ check_parameters:'
1492	PRINT*, ' overshoot_limit_... < 0.0 is not allowed'
1493	ENDIF
1494	CALL local_stop
1495	ENDIF
1496	IF ( ups_limit_u < 0.0 .OR. ups_limit_v < 0.0 .OR. ups_limit_w < 0.0 .OR. &
1497	ups_limit_pt < 0.0 .OR. ups_limit_e < 0.0 ) THEN
1498	IF ( myid == 0 ) THEN
1499	PRINT*, '+++ check_parameters:'
1500	PRINT*, ' ups_limit_... < 0.0 is not allowed'
1501	ENDIF
1502	CALL local_stop
1503	ENDIF
1504
1505	!
1506	!-- Check number of chosen statistic regions. More than 10 regions are not
1507	!-- allowed, because so far no more than 10 corresponding output files can
1508	!-- be opened (cf. check_open)
1509	IF ( statistic_regions > 9 .OR. statistic_regions < 0 ) THEN
1510	IF ( myid == 0 ) THEN
1511	PRINT*, '+++ check_parameters: Number of statistic_regions = ', &
1512	statistic_regions+1
1513	PRINT*, ' Only 10 regions are allowed'
1514	ENDIF
1515	CALL local_stop
1516	ENDIF
1517	IF ( normalizing_region > statistic_regions .OR. &
1518	normalizing_region < 0) THEN
1519	IF ( myid == 0 ) THEN
1520	PRINT*, '+++ check_parameters: normalizing_region = ', &
1521	normalizing_region, ' is unknown'
1522	PRINT*, ' Must be <= ', statistic_regions
1523	ENDIF
1524	CALL local_stop
1525	ENDIF
1526
1527	!
1528	!-- Check the interval for sorting particles.
1529	!-- Using particles as cloud droplets requires sorting after each timestep.
1530	IF ( dt_sort_particles /= 0.0 .AND. cloud_droplets ) THEN
1531	dt_sort_particles = 0.0
1532	IF ( myid == 0 ) THEN
1533	PRINT*, '+++ WARNING: check_parameters:'
1534	PRINT*, ' dt_sort_particles is reset to 0.0 because ', &
1535	'of cloud_droplets = .TRUE.'
1536	ENDIF
1537	ENDIF
1538
1539	!
1540	!-- Set the default intervals for data output, if necessary
1541	!-- NOTE: dt_dosp has already been set in package_parin
1542	IF ( dt_data_output /= 9999999.9 ) THEN
1543	IF ( dt_dopr == 9999999.9 ) dt_dopr = dt_data_output
1544	IF ( dt_dopts == 9999999.9 ) dt_dopts = dt_data_output
1545	IF ( dt_do2d_xy == 9999999.9 ) dt_do2d_xy = dt_data_output
1546	IF ( dt_do2d_xz == 9999999.9 ) dt_do2d_xz = dt_data_output
1547	IF ( dt_do2d_yz == 9999999.9 ) dt_do2d_yz = dt_data_output
1548	IF ( dt_do3d == 9999999.9 ) dt_do3d = dt_data_output
1549	IF ( dt_data_output_av == 9999999.9 ) dt_data_output_av = dt_data_output
1550	ENDIF
1551
1552	!
1553	!-- Set the default skip time intervals for data output, if necessary
1554	IF ( skip_time_dopr == 9999999.9 ) &
1555	skip_time_dopr = skip_time_data_output
1556	IF ( skip_time_dosp == 9999999.9 ) &
1557	skip_time_dosp = skip_time_data_output
1558	IF ( skip_time_do2d_xy == 9999999.9 ) &
1559	skip_time_do2d_xy = skip_time_data_output
1560	IF ( skip_time_do2d_xz == 9999999.9 ) &
1561	skip_time_do2d_xz = skip_time_data_output
1562	IF ( skip_time_do2d_yz == 9999999.9 ) &
1563	skip_time_do2d_yz = skip_time_data_output
1564	IF ( skip_time_do3d == 9999999.9 ) &
1565	skip_time_do3d = skip_time_data_output
1566	IF ( skip_time_data_output_av == 9999999.9 ) &
1567	skip_time_data_output_av = skip_time_data_output
1568
1569	!
1570	!-- Check the average intervals (first for 3d-data, then for profiles and
1571	!-- spectra)
1572	IF ( averaging_interval > dt_data_output_av ) THEN
1573	IF ( myid == 0 ) THEN
1574	PRINT*, '+++ check_parameters: average_interval=', &
1575	averaging_interval, ' must be <= dt_data_output=', &
1576	dt_data_output
1577	ENDIF
1578	CALL local_stop
1579	ENDIF
1580
1581	IF ( averaging_interval_pr == 9999999.9 ) THEN
1582	averaging_interval_pr = averaging_interval
1583	ENDIF
1584
1585	IF ( averaging_interval_pr > dt_dopr ) THEN
1586	IF ( myid == 0 ) THEN
1587	PRINT*, '+++ check_parameters: averaging_interval_pr=', &
1588	averaging_interval_pr, ' must be <= dt_dopr=', dt_dopr
1589	ENDIF
1590	CALL local_stop
1591	ENDIF
1592
1593	IF ( averaging_interval_sp == 9999999.9 ) THEN
1594	averaging_interval_sp = averaging_interval
1595	ENDIF
1596
1597	IF ( averaging_interval_sp > dt_dosp ) THEN
1598	IF ( myid == 0 ) THEN
1599	PRINT*, '+++ check_parameters: averaging_interval_sp=', &
1600	averaging_interval_sp, ' must be <= dt_dosp=', dt_dosp
1601	ENDIF
1602	CALL local_stop
1603	ENDIF
1604
1605	!
1606	!-- Set the default interval for profiles entering the temporal average
1607	IF ( dt_averaging_input_pr == 9999999.9 ) THEN
1608	dt_averaging_input_pr = dt_averaging_input
1609	ENDIF
1610
1611	!
1612	!-- Set the default interval for the output of timeseries to a reasonable
1613	!-- value (tries to minimize the number of calls of flow_statistics)
1614	IF ( dt_dots == 9999999.9 ) THEN
1615	IF ( averaging_interval_pr == 0.0 ) THEN
1616	dt_dots = MIN( dt_run_control, dt_dopr )
1617	ELSE
1618	dt_dots = MIN( dt_run_control, dt_averaging_input_pr )
1619	ENDIF
1620	ENDIF
1621
1622	!
1623	!-- Check the sample rate for averaging (first for 3d-data, then for profiles)
1624	IF ( dt_averaging_input > averaging_interval ) THEN
1625	IF ( myid == 0 ) THEN
1626	PRINT*, '+++ check_parameters: dt_averaging_input=', &
1627	dt_averaging_input, ' must be <= averaging_interval=', &
1628	averaging_interval
1629	ENDIF
1630	CALL local_stop
1631	ENDIF
1632
1633	IF ( dt_averaging_input_pr > averaging_interval_pr ) THEN
1634	IF ( myid == 0 ) THEN
1635	PRINT*, '+++ check_parameters: dt_averaging_input_pr=', &
1636	dt_averaging_input_pr, &
1637	' must be <= averaging_interval_pr=', &
1638	averaging_interval_pr
1639	ENDIF
1640	CALL local_stop
1641	ENDIF
1642
1643	!
1644	!-- Set the default value for the integration interval of precipitation amount
1645	IF ( precipitation ) THEN
1646	IF ( precipitation_amount_interval == 9999999.9 ) THEN
1647	precipitation_amount_interval = dt_do2d_xy
1648	ELSE
1649	IF ( precipitation_amount_interval > dt_do2d_xy ) THEN
1650	IF ( myid == 0 ) PRINT*, '+++ check_parameters: ', &
1651	'precipitation_amount_interval =', &
1652	precipitation_amount_interval, &
1653	' must not be larger than dt_do2d_xy', &
1654	' = ', dt_do2d_xy
1655	CALL local_stop
1656	ENDIF
1657	ENDIF
1658	ENDIF
1659
1660	!
1661	!-- Determine the number of output profiles and check whether they are
1662	!-- permissible
1663	DO WHILE ( data_output_pr(dopr_n+1) /= ' ' )
1664
1665	dopr_n = dopr_n + 1
1666	i = dopr_n
1667
1668	!
1669	!-- Determine internal profile number (for hom, homs)
1670	!-- and store height levels
1671	SELECT CASE ( TRIM( data_output_pr(i) ) )
1672
1673	CASE ( 'u', '#u' )
1674	dopr_index(i) = 1
1675	dopr_unit(i) = 'm/s'
1676	hom(:,2,1,:) = SPREAD( zu, 2, statistic_regions+1 )
1677	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1678	dopr_initial_index(i) = 5
1679	hom(:,2,5,:) = SPREAD( zu, 2, statistic_regions+1 )
1680	data_output_pr(i) = data_output_pr(i)(2:)
1681	ENDIF
1682
1683	CASE ( 'v', '#v' )
1684	dopr_index(i) = 2
1685	dopr_unit(i) = 'm/s'
1686	hom(:,2,2,:) = SPREAD( zu, 2, statistic_regions+1 )
1687	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1688	dopr_initial_index(i) = 6
1689	hom(:,2,6,:) = SPREAD( zu, 2, statistic_regions+1 )
1690	data_output_pr(i) = data_output_pr(i)(2:)
1691	ENDIF
1692
1693	CASE ( 'w' )
1694	dopr_index(i) = 3
1695	dopr_unit(i) = 'm/s'
1696	hom(:,2,3,:) = SPREAD( zw, 2, statistic_regions+1 )
1697
1698	CASE ( 'pt', '#pt' )
1699	IF ( .NOT. cloud_physics ) THEN
1700	dopr_index(i) = 4
1701	dopr_unit(i) = 'K'
1702	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
1703	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1704	dopr_initial_index(i) = 7
1705	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
1706	hom(nzb,2,7,:) = 0.0 ! because zu(nzb) is negative
1707	data_output_pr(i) = data_output_pr(i)(2:)
1708	ENDIF
1709	ELSE
1710	dopr_index(i) = 43
1711	dopr_unit(i) = 'K'
1712	hom(:,2,43,:) = SPREAD( zu, 2, statistic_regions+1 )
1713	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1714	dopr_initial_index(i) = 28
1715	hom(:,2,28,:) = SPREAD( zu, 2, statistic_regions+1 )
1716	hom(nzb,2,28,:) = 0.0 ! because zu(nzb) is negative
1717	data_output_pr(i) = data_output_pr(i)(2:)
1718	ENDIF
1719	ENDIF
1720
1721	CASE ( 'e' )
1722	dopr_index(i) = 8
1723	dopr_unit(i) = 'm2/s2'
1724	hom(:,2,8,:) = SPREAD( zu, 2, statistic_regions+1 )
1725	hom(nzb,2,8,:) = 0.0
1726
1727	CASE ( 'km', '#km' )
1728	dopr_index(i) = 9
1729	dopr_unit(i) = 'm2/s'
1730	hom(:,2,9,:) = SPREAD( zu, 2, statistic_regions+1 )
1731	hom(nzb,2,9,:) = 0.0
1732	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1733	dopr_initial_index(i) = 23
1734	hom(:,2,23,:) = hom(:,2,9,:)
1735	data_output_pr(i) = data_output_pr(i)(2:)
1736	ENDIF
1737
1738	CASE ( 'kh', '#kh' )
1739	dopr_index(i) = 10
1740	dopr_unit(i) = 'm2/s'
1741	hom(:,2,10,:) = SPREAD( zu, 2, statistic_regions+1 )
1742	hom(nzb,2,10,:) = 0.0
1743	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1744	dopr_initial_index(i) = 24
1745	hom(:,2,24,:) = hom(:,2,10,:)
1746	data_output_pr(i) = data_output_pr(i)(2:)
1747	ENDIF
1748
1749	CASE ( 'l', '#l' )
1750	dopr_index(i) = 11
1751	dopr_unit(i) = 'm'
1752	hom(:,2,11,:) = SPREAD( zu, 2, statistic_regions+1 )
1753	hom(nzb,2,11,:) = 0.0
1754	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1755	dopr_initial_index(i) = 25
1756	hom(:,2,25,:) = hom(:,2,11,:)
1757	data_output_pr(i) = data_output_pr(i)(2:)
1758	ENDIF
1759
1760	CASE ( 'w"u"' )
1761	dopr_index(i) = 12
1762	dopr_unit(i) = 'm2/s2'
1763	hom(:,2,12,:) = SPREAD( zw, 2, statistic_regions+1 )
1764	IF ( prandtl_layer ) hom(nzb,2,12,:) = zu(1)
1765
1766	CASE ( 'wu' )
1767	dopr_index(i) = 13
1768	dopr_unit(i) = 'm2/s2'
1769	hom(:,2,13,:) = SPREAD( zw, 2, statistic_regions+1 )
1770
1771	CASE ( 'w"v"' )
1772	dopr_index(i) = 14
1773	dopr_unit(i) = 'm2/s2'
1774	hom(:,2,14,:) = SPREAD( zw, 2, statistic_regions+1 )
1775	IF ( prandtl_layer ) hom(nzb,2,14,:) = zu(1)
1776
1777	CASE ( 'wv' )
1778	dopr_index(i) = 15
1779	dopr_unit(i) = 'm2/s2'
1780	hom(:,2,15,:) = SPREAD( zw, 2, statistic_regions+1 )
1781
1782	CASE ( 'w"pt"' )
1783	dopr_index(i) = 16
1784	dopr_unit(i) = 'K m/s'
1785	hom(:,2,16,:) = SPREAD( zw, 2, statistic_regions+1 )
1786
1787	CASE ( 'wpt' )
1788	dopr_index(i) = 17
1789	dopr_unit(i) = 'K m/s'
1790	hom(:,2,17,:) = SPREAD( zw, 2, statistic_regions+1 )
1791
1792	CASE ( 'wpt' )
1793	dopr_index(i) = 18
1794	dopr_unit(i) = 'K m/s'
1795	hom(:,2,18,:) = SPREAD( zw, 2, statistic_regions+1 )
1796
1797	CASE ( 'wu' )
1798	dopr_index(i) = 19
1799	dopr_unit(i) = 'm2/s2'
1800	hom(:,2,19,:) = SPREAD( zw, 2, statistic_regions+1 )
1801	IF ( prandtl_layer ) hom(nzb,2,19,:) = zu(1)
1802
1803	CASE ( 'wv' )
1804	dopr_index(i) = 20
1805	dopr_unit(i) = 'm2/s2'
1806	hom(:,2,20,:) = SPREAD( zw, 2, statistic_regions+1 )
1807	IF ( prandtl_layer ) hom(nzb,2,20,:) = zu(1)
1808
1809	CASE ( 'wptBC' )
1810	dopr_index(i) = 21
1811	dopr_unit(i) = 'K m/s'
1812	hom(:,2,21,:) = SPREAD( zw, 2, statistic_regions+1 )
1813
1814	CASE ( 'wptBC' )
1815	dopr_index(i) = 22
1816	dopr_unit(i) = 'K m/s'
1817	hom(:,2,22,:) = SPREAD( zw, 2, statistic_regions+1 )
1818
1819	CASE ( 'sa', '#sa' )
1820	IF ( .NOT. ocean ) THEN
1821	IF ( myid == 0 ) THEN
1822	PRINT*, '+++ check_parameters: data_output_pr = ', &
1823	data_output_pr(i), &
1824	' is not implemented for ocean = FALSE'
1825	ENDIF
1826	CALL local_stop
1827	ELSE
1828	dopr_index(i) = 23
1829	dopr_unit(i) = 'psu'
1830	hom(:,2,23,:) = SPREAD( zu, 2, statistic_regions+1 )
1831	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1832	dopr_initial_index(i) = 26
1833	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1834	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1835	data_output_pr(i) = data_output_pr(i)(2:)
1836	ENDIF
1837	ENDIF
1838
1839	CASE ( 'u*2' )
1840	dopr_index(i) = 30
1841	dopr_unit(i) = 'm2/s2'
1842	hom(:,2,30,:) = SPREAD( zu, 2, statistic_regions+1 )
1843
1844	CASE ( 'v*2' )
1845	dopr_index(i) = 31
1846	dopr_unit(i) = 'm2/s2'
1847	hom(:,2,31,:) = SPREAD( zu, 2, statistic_regions+1 )
1848
1849	CASE ( 'w*2' )
1850	dopr_index(i) = 32
1851	dopr_unit(i) = 'm2/s2'
1852	hom(:,2,32,:) = SPREAD( zw, 2, statistic_regions+1 )
1853
1854	CASE ( 'pt*2' )
1855	dopr_index(i) = 33
1856	dopr_unit(i) = 'K2'
1857	hom(:,2,33,:) = SPREAD( zu, 2, statistic_regions+1 )
1858
1859	CASE ( 'e*' )
1860	dopr_index(i) = 34
1861	dopr_unit(i) = 'm2/s2'
1862	hom(:,2,34,:) = SPREAD( zu, 2, statistic_regions+1 )
1863
1864	CASE ( 'w2pt' )
1865	dopr_index(i) = 35
1866	dopr_unit(i) = 'K m2/s2'
1867	hom(:,2,35,:) = SPREAD( zw, 2, statistic_regions+1 )
1868
1869	CASE ( 'wpt2' )
1870	dopr_index(i) = 36
1871	dopr_unit(i) = 'K2 m/s'
1872	hom(:,2,36,:) = SPREAD( zw, 2, statistic_regions+1 )
1873
1874	CASE ( 'we' )
1875	dopr_index(i) = 37
1876	dopr_unit(i) = 'm3/s3'
1877	hom(:,2,37,:) = SPREAD( zw, 2, statistic_regions+1 )
1878
1879	CASE ( 'w*3' )
1880	dopr_index(i) = 38
1881	dopr_unit(i) = 'm3/s3'
1882	hom(:,2,38,:) = SPREAD( zw, 2, statistic_regions+1 )
1883
1884	CASE ( 'Sw' )
1885	dopr_index(i) = 39
1886	dopr_unit(i) = 'none'
1887	hom(:,2,39,:) = SPREAD( zw, 2, statistic_regions+1 )
1888
1889	CASE ( 'q', '#q' )
1890	IF ( .NOT. humidity ) THEN
1891	IF ( myid == 0 ) THEN
1892	PRINT*, '+++ check_parameters: data_output_pr = ', &
1893	data_output_pr(i), &
1894	' is not implemented for humidity = FALSE'
1895	ENDIF
1896	CALL local_stop
1897	ELSE
1898	dopr_index(i) = 41
1899	dopr_unit(i) = 'kg/kg'
1900	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
1901	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1902	dopr_initial_index(i) = 26
1903	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1904	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1905	data_output_pr(i) = data_output_pr(i)(2:)
1906	ENDIF
1907	ENDIF
1908
1909	CASE ( 's', '#s' )
1910	IF ( .NOT. passive_scalar ) THEN
1911	IF ( myid == 0 ) THEN
1912	PRINT*, '+++ check_parameters: data_output_pr = ', &
1913	data_output_pr(i), &
1914	' is not implemented for passive_scalar = FALSE'
1915	ENDIF
1916	CALL local_stop
1917	ELSE
1918	dopr_index(i) = 41
1919	dopr_unit(i) = 'kg/m3'
1920	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
1921	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1922	dopr_initial_index(i) = 26
1923	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1924	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1925	data_output_pr(i) = data_output_pr(i)(2:)
1926	ENDIF
1927	ENDIF
1928
1929	CASE ( 'qv', '#qv' )
1930	IF ( .NOT. cloud_physics ) THEN
1931	dopr_index(i) = 41
1932	dopr_unit(i) = 'kg/kg'
1933	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
1934	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1935	dopr_initial_index(i) = 26
1936	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1937	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1938	data_output_pr(i) = data_output_pr(i)(2:)
1939	ENDIF
1940	ELSE
1941	dopr_index(i) = 42
1942	dopr_unit(i) = 'kg/kg'
1943	hom(:,2,42,:) = SPREAD( zu, 2, statistic_regions+1 )
1944	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1945	dopr_initial_index(i) = 27
1946	hom(:,2,27,:) = SPREAD( zu, 2, statistic_regions+1 )
1947	hom(nzb,2,27,:) = 0.0 ! weil zu(nzb) negativ ist
1948	data_output_pr(i) = data_output_pr(i)(2:)
1949	ENDIF
1950	ENDIF
1951
1952	CASE ( 'lpt', '#lpt' )
1953	IF ( .NOT. cloud_physics ) THEN
1954	IF ( myid == 0 ) THEN
1955	PRINT*, '+++ check_parameters: data_output_pr = ', &
1956	data_output_pr(i), &
1957	' is not implemented for cloud_physics = FALSE'
1958	ENDIF
1959	CALL local_stop
1960	ELSE
1961	dopr_index(i) = 4
1962	dopr_unit(i) = 'K'
1963	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
1964	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1965	dopr_initial_index(i) = 7
1966	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
1967	hom(nzb,2,7,:) = 0.0 ! weil zu(nzb) negativ ist
1968	data_output_pr(i) = data_output_pr(i)(2:)
1969	ENDIF
1970	ENDIF
1971
1972	CASE ( 'vpt', '#vpt' )
1973	dopr_index(i) = 44
1974	dopr_unit(i) = 'K'
1975	hom(:,2,44,:) = SPREAD( zu, 2, statistic_regions+1 )
1976	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1977	dopr_initial_index(i) = 29
1978	hom(:,2,29,:) = SPREAD( zu, 2, statistic_regions+1 )
1979	hom(nzb,2,29,:) = 0.0 ! weil zu(nzb) negativ ist
1980	data_output_pr(i) = data_output_pr(i)(2:)
1981	ENDIF
1982
1983	CASE ( 'w"vpt"' )
1984	dopr_index(i) = 45
1985	dopr_unit(i) = 'K m/s'
1986	hom(:,2,45,:) = SPREAD( zw, 2, statistic_regions+1 )
1987
1988	CASE ( 'wvpt' )
1989	dopr_index(i) = 46
1990	dopr_unit(i) = 'K m/s'
1991	hom(:,2,46,:) = SPREAD( zw, 2, statistic_regions+1 )
1992
1993	CASE ( 'wvpt' )
1994	dopr_index(i) = 47
1995	dopr_unit(i) = 'K m/s'
1996	hom(:,2,47,:) = SPREAD( zw, 2, statistic_regions+1 )
1997
1998	CASE ( 'w"q"' )
1999	IF ( .NOT. humidity ) THEN
2000	IF ( myid == 0 ) THEN
2001	PRINT*, '+++ check_parameters: data_output_pr = ', &
2002	data_output_pr(i), &
2003	' is not implemented for humidity = FALSE'
2004	ENDIF
2005	CALL local_stop
2006	ELSE
2007	dopr_index(i) = 48
2008	dopr_unit(i) = 'kg/kg m/s'
2009	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2010	ENDIF
2011
2012	CASE ( 'wq' )
2013	IF ( .NOT. humidity ) THEN
2014	IF ( myid == 0 ) THEN
2015	PRINT*, '+++ check_parameters: data_output_pr = ', &
2016	data_output_pr(i), &
2017	' is not implemented for humidity = FALSE'
2018	ENDIF
2019	CALL local_stop
2020	ELSE
2021	dopr_index(i) = 49
2022	dopr_unit(i) = 'kg/kg m/s'
2023	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2024	ENDIF
2025
2026	CASE ( 'wq' )
2027	IF ( .NOT. humidity ) THEN
2028	IF ( myid == 0 ) THEN
2029	PRINT*, '+++ check_parameters: data_output_pr = ', &
2030	data_output_pr(i), &
2031	' is not implemented for humidity = FALSE'
2032	ENDIF
2033	CALL local_stop
2034	ELSE
2035	dopr_index(i) = 50
2036	dopr_unit(i) = 'kg/kg m/s'
2037	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2038	ENDIF
2039
2040	CASE ( 'w"s"' )
2041	IF ( .NOT. passive_scalar ) THEN
2042	IF ( myid == 0 ) THEN
2043	PRINT*, '+++ check_parameters: data_output_pr = ', &
2044	data_output_pr(i), &
2045	' is not implemented for passive_scalar = FALSE'
2046	ENDIF
2047	CALL local_stop
2048	ELSE
2049	dopr_index(i) = 48
2050	dopr_unit(i) = 'kg/m3 m/s'
2051	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2052	ENDIF
2053
2054	CASE ( 'ws' )
2055	IF ( .NOT. passive_scalar ) THEN
2056	IF ( myid == 0 ) THEN
2057	PRINT*, '+++ check_parameters: data_output_pr = ', &
2058	data_output_pr(i), &
2059	' is not implemented for passive_scalar = FALSE'
2060	ENDIF
2061	CALL local_stop
2062	ELSE
2063	dopr_index(i) = 49
2064	dopr_unit(i) = 'kg/m3 m/s'
2065	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2066	ENDIF
2067
2068	CASE ( 'ws' )
2069	IF ( .NOT. passive_scalar ) THEN
2070	IF ( myid == 0 ) THEN
2071	PRINT*, '+++ check_parameters: data_output_pr = ', &
2072	data_output_pr(i), &
2073	' is not implemented for passive_scalar = FALSE'
2074	ENDIF
2075	CALL local_stop
2076	ELSE
2077	dopr_index(i) = 50
2078	dopr_unit(i) = 'kg/m3 m/s'
2079	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2080	ENDIF
2081
2082	CASE ( 'w"qv"' )
2083	IF ( humidity .AND. .NOT. cloud_physics ) &
2084	THEN
2085	dopr_index(i) = 48
2086	dopr_unit(i) = 'kg/kg m/s'
2087	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2088	ELSEIF( humidity .AND. cloud_physics ) THEN
2089	dopr_index(i) = 51
2090	dopr_unit(i) = 'kg/kg m/s'
2091	hom(:,2,51,:) = SPREAD( zw, 2, statistic_regions+1 )
2092	ELSE
2093	IF ( myid == 0 ) THEN
2094	PRINT*, '+++ check_parameters: data_output_pr = ', &
2095	data_output_pr(i), &
2096	' is not implemented for cloud_physics = FALSE', &
2097	' and humidity = FALSE'
2098	ENDIF
2099	CALL local_stop
2100	ENDIF
2101
2102	CASE ( 'wqv' )
2103	IF ( humidity .AND. .NOT. cloud_physics ) &
2104	THEN
2105	dopr_index(i) = 49
2106	dopr_unit(i) = 'kg/kg m/s'
2107	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2108	ELSEIF( humidity .AND. cloud_physics ) THEN
2109	dopr_index(i) = 52
2110	dopr_unit(i) = 'kg/kg m/s'
2111	hom(:,2,52,:) = SPREAD( zw, 2, statistic_regions+1 )
2112	ELSE
2113	IF ( myid == 0 ) THEN
2114	PRINT*, '+++ check_parameters: data_output_pr = ', &
2115	data_output_pr(i), &
2116	' is not implemented for cloud_physics = FALSE', &
2117	' and humidity = FALSE'
2118	ENDIF
2119	CALL local_stop
2120	ENDIF
2121
2122	CASE ( 'wqv' )
2123	IF ( humidity .AND. .NOT. cloud_physics ) &
2124	THEN
2125	dopr_index(i) = 50
2126	dopr_unit(i) = 'kg/kg m/s'
2127	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2128	ELSEIF( humidity .AND. cloud_physics ) THEN
2129	dopr_index(i) = 53
2130	dopr_unit(i) = 'kg/kg m/s'
2131	hom(:,2,53,:) = SPREAD( zw, 2, statistic_regions+1 )
2132	ELSE
2133	IF ( myid == 0 ) THEN
2134	PRINT*, '+++ check_parameters: data_output_pr = ', &
2135	data_output_pr(i), &
2136	' is not implemented for cloud_physics = FALSE', &
2137	' and humidity = FALSE'
2138	ENDIF
2139	CALL local_stop
2140	ENDIF
2141
2142	CASE ( 'ql' )
2143	IF ( .NOT. cloud_physics .AND. .NOT. cloud_droplets ) THEN
2144	IF ( myid == 0 ) THEN
2145	PRINT*, '+++ check_parameters: data_output_pr = ', &
2146	data_output_pr(i), &
2147	' is not implemented for cloud_physics = FALSE'
2148	ENDIF
2149	CALL local_stop
2150	ELSE
2151	dopr_index(i) = 54
2152	dopr_unit(i) = 'kg/kg'
2153	hom(:,2,54,:) = SPREAD( zu, 2, statistic_regions+1 )
2154	ENDIF
2155
2156	CASE ( 'wuu*/dz' )
2157	dopr_index(i) = 55
2158	dopr_unit(i) = 'm2/s3'
2159	hom(:,2,55,:) = SPREAD( zu, 2, statistic_regions+1 )
2160
2161	CASE ( 'wp/dz' )
2162	dopr_index(i) = 56
2163	dopr_unit(i) = 'm2/s3'
2164	hom(:,2,56,:) = SPREAD( zw, 2, statistic_regions+1 )
2165
2166	CASE ( 'w"e/dz' )
2167	dopr_index(i) = 57
2168	dopr_unit(i) = 'm2/s3'
2169	hom(:,2,57,:) = SPREAD( zu, 2, statistic_regions+1 )
2170
2171	CASE ( 'u"pt"' )
2172	dopr_index(i) = 58
2173	dopr_unit(i) = 'K m/s'
2174	hom(:,2,58,:) = SPREAD( zu, 2, statistic_regions+1 )
2175
2176	CASE ( 'upt' )
2177	dopr_index(i) = 59
2178	dopr_unit(i) = 'K m/s'
2179	hom(:,2,59,:) = SPREAD( zu, 2, statistic_regions+1 )
2180
2181	CASE ( 'upt_t' )
2182	dopr_index(i) = 60
2183	dopr_unit(i) = 'K m/s'
2184	hom(:,2,60,:) = SPREAD( zu, 2, statistic_regions+1 )
2185
2186	CASE ( 'v"pt"' )
2187	dopr_index(i) = 61
2188	dopr_unit(i) = 'K m/s'
2189	hom(:,2,61,:) = SPREAD( zu, 2, statistic_regions+1 )
2190
2191	CASE ( 'vpt' )
2192	dopr_index(i) = 62
2193	dopr_unit(i) = 'K m/s'
2194	hom(:,2,62,:) = SPREAD( zu, 2, statistic_regions+1 )
2195
2196	CASE ( 'vpt_t' )
2197	dopr_index(i) = 63
2198	dopr_unit(i) = 'K m/s'
2199	hom(:,2,63,:) = SPREAD( zu, 2, statistic_regions+1 )
2200
2201	CASE ( 'rho' )
2202	dopr_index(i) = 64
2203	dopr_unit(i) = 'kg/m3'
2204	hom(:,2,64,:) = SPREAD( zu, 2, statistic_regions+1 )
2205
2206	CASE ( 'w"sa"' )
2207	IF ( .NOT. ocean ) THEN
2208	IF ( myid == 0 ) THEN
2209	PRINT*, '+++ check_parameters: data_output_pr = ', &
2210	data_output_pr(i), &
2211	' is not implemented for ocean = FALSE'
2212	ENDIF
2213	CALL local_stop
2214	ELSE
2215	dopr_index(i) = 65
2216	dopr_unit(i) = 'psu m/s'
2217	hom(:,2,65,:) = SPREAD( zw, 2, statistic_regions+1 )
2218	ENDIF
2219
2220	CASE ( 'wsa' )
2221	IF ( .NOT. ocean ) THEN
2222	IF ( myid == 0 ) THEN
2223	PRINT*, '+++ check_parameters: data_output_pr = ', &
2224	data_output_pr(i), &
2225	' is not implemented for ocean = FALSE'
2226	ENDIF
2227	CALL local_stop
2228	ELSE
2229	dopr_index(i) = 66
2230	dopr_unit(i) = 'psu m/s'
2231	hom(:,2,66,:) = SPREAD( zw, 2, statistic_regions+1 )
2232	ENDIF
2233
2234	CASE ( 'wsa' )
2235	IF ( .NOT. ocean ) THEN
2236	IF ( myid == 0 ) THEN
2237	PRINT*, '+++ check_parameters: data_output_pr = ', &
2238	data_output_pr(i), &
2239	' is not implemented for ocean = FALSE'
2240	ENDIF
2241	CALL local_stop
2242	ELSE
2243	dopr_index(i) = 67
2244	dopr_unit(i) = 'psu m/s'
2245	hom(:,2,67,:) = SPREAD( zw, 2, statistic_regions+1 )
2246	ENDIF
2247
2248	CASE ( 'wp' )
2249	dopr_index(i) = 68
2250	dopr_unit(i) = 'm3/s3'
2251	hom(:,2,68,:) = SPREAD( zu, 2, statistic_regions+1 )
2252
2253	CASE ( 'w"e' )
2254	dopr_index(i) = 69
2255	dopr_unit(i) = 'm3/s3'
2256	hom(:,2,69,:) = SPREAD( zu, 2, statistic_regions+1 )
2257
2258
2259	CASE DEFAULT
2260
2261	CALL user_check_data_output_pr( data_output_pr(i), i, unit )
2262
2263	IF ( unit == 'illegal' ) THEN
2264	IF ( myid == 0 ) THEN
2265	IF ( data_output_pr_user(1) /= ' ' ) THEN
2266	PRINT*, '+++ check_parameters: illegal value for data_',&
2267	'output_pr or data_output_pr_user: "', &
2268	TRIM( data_output_pr(i) ), '"'
2269	ELSE
2270	PRINT*, '+++ check_parameters: illegal value for data_',&
2271	'output_pr: "', TRIM( data_output_pr(i) ),'"'
2272	ENDIF
2273	ENDIF
2274	CALL local_stop
2275	ENDIF
2276
2277	END SELECT
2278	!
2279	!-- Check to which of the predefined coordinate systems the profile belongs
2280	DO k = 1, crmax
2281	IF ( INDEX( cross_profiles(k), ' '//TRIM( data_output_pr(i) )//' ' ) &
2282	/=0 ) &
2283	THEN
2284	dopr_crossindex(i) = k
2285	EXIT
2286	ENDIF
2287	ENDDO
2288	!
2289	!-- Generate the text for the labels of the PROFIL output file. "-characters
2290	!-- must be substituted, otherwise PROFIL would interpret them as TeX
2291	!-- control characters
2292	dopr_label(i) = data_output_pr(i)
2293	position = INDEX( dopr_label(i) , '"' )
2294	DO WHILE ( position /= 0 )
2295	dopr_label(i)(position:position) = ''''
2296	position = INDEX( dopr_label(i) , '"' )
2297	ENDDO
2298
2299	ENDDO
2300
2301	!
2302	!-- y-value range of the coordinate system (PROFIL).
2303	!-- x-value range determined in plot_1d.
2304	IF ( .NOT. ocean ) THEN
2305	cross_uymin = 0.0
2306	IF ( z_max_do1d == -1.0 ) THEN
2307	cross_uymax = zu(nzt+1)
2308	ELSEIF ( z_max_do1d < zu(nzb+1) .OR. z_max_do1d > zu(nzt+1) ) THEN
2309	IF ( myid == 0 ) PRINT*, '+++ check_parameters: z_max_do1d=', &
2310	z_max_do1d,' must be >= ', zu(nzb+1), &
2311	' or <= ', zu(nzt+1)
2312	CALL local_stop
2313	ELSE
2314	cross_uymax = z_max_do1d
2315	ENDIF
2316	ENDIF
2317
2318	!
2319	!-- Check whether the chosen normalizing factor for the coordinate systems is
2320	!-- permissible
2321	DO i = 1, crmax
2322	SELECT CASE ( TRIM( cross_normalized_x(i) ) ) ! TRIM required on IBM
2323
2324	CASE ( '', 'wpt0', 'ws2', 'tsw2', 'ws3', 'ws2tsw', 'wstsw2' )
2325	j = 0
2326
2327	CASE DEFAULT
2328	IF ( myid == 0 ) THEN
2329	PRINT*, '+++ check_parameters: unknown normalize method'
2330	PRINT*, ' cross_normalized_x="',cross_normalized_x(i),'"'
2331	ENDIF
2332	CALL local_stop
2333
2334	END SELECT
2335	SELECT CASE ( TRIM( cross_normalized_y(i) ) ) ! TRIM required on IBM
2336
2337	CASE ( '', 'z_i' )
2338	j = 0
2339
2340	CASE DEFAULT
2341	IF ( myid == 0 ) THEN
2342	PRINT*, '+++ check_parameters: unknown normalize method'
2343	PRINT*, ' cross_normalized_y="',cross_normalized_y(i),'"'
2344	ENDIF
2345	CALL local_stop
2346
2347	END SELECT
2348	ENDDO
2349	!
2350	!-- Check normalized y-value range of the coordinate system (PROFIL)
2351	IF ( z_max_do1d_normalized /= -1.0 .AND. z_max_do1d_normalized <= 0.0 ) &
2352	THEN
2353	IF ( myid == 0 ) PRINT*,'+++ check_parameters: z_max_do1d_normalize', &
2354	'd=', z_max_do1d_normalized, ' must be >= 0.0'
2355	CALL local_stop
2356	ENDIF
2357
2358
2359	!
2360	!-- Append user-defined data output variables to the standard data output
2361	IF ( data_output_user(1) /= ' ' ) THEN
2362	i = 1
2363	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
2364	i = i + 1
2365	ENDDO
2366	j = 1
2367	DO WHILE ( data_output_user(j) /= ' ' .AND. j <= 100 )
2368	IF ( i > 100 ) THEN
2369	IF ( myid == 0 ) THEN
2370	PRINT*, '+++ check_parameters: number of output quantitities', &
2371	' given by data_output and data_output_user'
2372	PRINT*, ' exceeds the limit of 100'
2373	ENDIF
2374	CALL local_stop
2375	ENDIF
2376	data_output(i) = data_output_user(j)
2377	i = i + 1
2378	j = j + 1
2379	ENDDO
2380	ENDIF
2381
2382	!
2383	!-- Check and set steering parameters for 2d/3d data output and averaging
2384	i = 1
2385	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
2386	!
2387	!-- Check for data averaging
2388	ilen = LEN_TRIM( data_output(i) )
2389	j = 0 ! no data averaging
2390	IF ( ilen > 3 ) THEN
2391	IF ( data_output(i)(ilen-2:ilen) == '_av' ) THEN
2392	j = 1 ! data averaging
2393	data_output(i) = data_output(i)(1:ilen-3)
2394	ENDIF
2395	ENDIF
2396	!
2397	!-- Check for cross section or volume data
2398	ilen = LEN_TRIM( data_output(i) )
2399	k = 0 ! 3d data
2400	var = data_output(i)(1:ilen)
2401	IF ( ilen > 3 ) THEN
2402	IF ( data_output(i)(ilen-2:ilen) == '_xy' .OR. &
2403	data_output(i)(ilen-2:ilen) == '_xz' .OR. &
2404	data_output(i)(ilen-2:ilen) == '_yz' ) THEN
2405	k = 1 ! 2d data
2406	var = data_output(i)(1:ilen-3)
2407	ENDIF
2408	ENDIF
2409	!
2410	!-- Check for allowed value and set units
2411	SELECT CASE ( TRIM( var ) )
2412
2413	CASE ( 'e' )
2414	IF ( constant_diffusion ) THEN
2415	IF ( myid == 0 ) THEN
2416	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
2417	'" requires constant_diffusion = .FALSE.'
2418	ENDIF
2419	CALL local_stop
2420	ENDIF
2421	unit = 'm2/s2'
2422
2423	CASE ( 'pc', 'pr' )
2424	IF ( .NOT. particle_advection ) THEN
2425	IF ( myid == 0 ) THEN
2426	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
2427	'" requires a "particles_par"-NAMELIST'
2428	PRINT*, ' in the parameter file (PARIN)'
2429	ENDIF
2430	CALL local_stop
2431	ENDIF
2432	IF ( TRIM( var ) == 'pc' ) unit = 'number'
2433	IF ( TRIM( var ) == 'pr' ) unit = 'm'
2434
2435	CASE ( 'q', 'vpt' )
2436	IF ( .NOT. humidity ) THEN
2437	IF ( myid == 0 ) THEN
2438	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
2439	'" requires humidity = .TRUE.'
2440	ENDIF
2441	CALL local_stop
2442	ENDIF
2443	IF ( TRIM( var ) == 'q' ) unit = 'kg/kg'
2444	IF ( TRIM( var ) == 'vpt' ) unit = 'K'
2445
2446	CASE ( 'ql' )
2447	IF ( .NOT. ( cloud_physics .OR. cloud_droplets ) ) THEN
2448	IF ( myid == 0 ) THEN
2449	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
2450	'" requires cloud_physics = .TRUE.'
2451	PRINT*, ' or cloud_droplets = .TRUE.'
2452	ENDIF
2453	CALL local_stop
2454	ENDIF
2455	unit = 'kg/kg'
2456
2457	CASE ( 'ql_c', 'ql_v', 'ql_vp' )
2458	IF ( .NOT. cloud_droplets ) THEN
2459	IF ( myid == 0 ) THEN
2460	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
2461	'" requires cloud_droplets = .TRUE.'
2462	ENDIF
2463	CALL local_stop
2464	ENDIF
2465	IF ( TRIM( var ) == 'ql_c' ) unit = 'kg/kg'
2466	IF ( TRIM( var ) == 'ql_v' ) unit = 'm3'
2467	IF ( TRIM( var ) == 'ql_vp' ) unit = 'none'
2468
2469	CASE ( 'qv' )
2470	IF ( .NOT. cloud_physics ) THEN
2471	IF ( myid == 0 ) THEN
2472	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
2473	'" requires cloud_physics = .TRUE.'
2474	ENDIF
2475	CALL local_stop
2476	ENDIF
2477	unit = 'kg/kg'
2478
2479	CASE ( 'rho' )
2480	IF ( .NOT. ocean ) THEN
2481	IF ( myid == 0 ) THEN
2482	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
2483	'" requires ocean = .TRUE.'
2484	ENDIF
2485	CALL local_stop
2486	ENDIF
2487	unit = 'kg/m3'
2488
2489	CASE ( 's' )
2490	IF ( .NOT. passive_scalar ) THEN
2491	IF ( myid == 0 ) THEN
2492	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
2493	'" requires passive_scalar = .TRUE.'
2494	ENDIF
2495	CALL local_stop
2496	ENDIF
2497	unit = 'conc'
2498
2499	CASE ( 'sa' )
2500	IF ( .NOT. ocean ) THEN
2501	IF ( myid == 0 ) THEN
2502	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
2503	'" requires ocean = .TRUE.'
2504	ENDIF
2505	CALL local_stop
2506	ENDIF
2507	unit = 'psu'
2508
2509	CASE ( 'u', 't', 'lwp', 'pra', 'prr', 'z0' )
2510	IF ( k == 0 .OR. data_output(i)(ilen-2:ilen) /= '_xy' ) THEN
2511	IF ( myid == 0 ) THEN
2512	PRINT*, '+++ check_parameters: illegal value for data_',&
2513	'output: "', TRIM( var ), '" is only allowed'
2514	PRINT*, ' for horizontal cross section'
2515	ENDIF
2516	CALL local_stop
2517	ENDIF
2518	IF ( TRIM( var ) == 'lwp*' .AND. .NOT. cloud_physics ) THEN
2519	IF ( myid == 0 ) THEN
2520	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
2521	'" requires cloud_physics = .TRUE.'
2522	ENDIF
2523	CALL local_stop
2524	ENDIF
2525	IF ( TRIM( var ) == 'pra*' .AND. .NOT. precipitation ) THEN
2526	IF ( myid == 0 ) THEN
2527	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
2528	'" requires precipitation = .TRUE.'
2529	ENDIF
2530	CALL local_stop
2531	ENDIF
2532	IF ( TRIM( var ) == 'pra*' .AND. j == 1 ) THEN
2533	IF ( myid == 0 ) THEN
2534	PRINT*, '+++ check_parameters: temporal averaging of ', &
2535	' precipitation amount "', TRIM( var ), &
2536	'" not possible'
2537	ENDIF
2538	CALL local_stop
2539	ENDIF
2540	IF ( TRIM( var ) == 'prr*' .AND. .NOT. precipitation ) THEN
2541	IF ( myid == 0 ) THEN
2542	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
2543	'" requires precipitation = .TRUE.'
2544	ENDIF
2545	CALL local_stop
2546	ENDIF
2547
2548
2549	IF ( TRIM( var ) == 'u*' ) unit = 'm/s'
2550	IF ( TRIM( var ) == 't*' ) unit = 'K'
2551	IF ( TRIM( var ) == 'lwp' ) unit = 'kg/kgm'
2552	IF ( TRIM( var ) == 'pra*' ) unit = 'mm'
2553	IF ( TRIM( var ) == 'prr*' ) unit = 'mm/s'
2554	IF ( TRIM( var ) == 'z0*' ) unit = 'm'
2555
2556	CASE ( 'p', 'pt', 'u', 'v', 'w' )
2557	IF ( TRIM( var ) == 'p' ) unit = 'Pa'
2558	IF ( TRIM( var ) == 'pt' ) unit = 'K'
2559	IF ( TRIM( var ) == 'u' ) unit = 'm/s'
2560	IF ( TRIM( var ) == 'v' ) unit = 'm/s'
2561	IF ( TRIM( var ) == 'w' ) unit = 'm/s'
2562	CONTINUE
2563
2564	CASE DEFAULT
2565	CALL user_check_data_output( var, unit )
2566
2567	IF ( unit == 'illegal' ) THEN
2568	IF ( myid == 0 ) THEN
2569	IF ( data_output_user(1) /= ' ' ) THEN
2570	PRINT*, '+++ check_parameters: illegal value for data_',&
2571	'output or data_output_user: "', &
2572	TRIM( data_output(i) ), '"'
2573	ELSE
2574	PRINT*, '+++ check_parameters: illegal value for data_',&
2575	'output: "', TRIM( data_output(i) ), '"'
2576	ENDIF
2577	ENDIF
2578	CALL local_stop
2579	ENDIF
2580
2581	END SELECT
2582	!
2583	!-- Set the internal steering parameters appropriately
2584	IF ( k == 0 ) THEN
2585	do3d_no(j) = do3d_no(j) + 1
2586	do3d(j,do3d_no(j)) = data_output(i)
2587	do3d_unit(j,do3d_no(j)) = unit
2588	ELSE
2589	do2d_no(j) = do2d_no(j) + 1
2590	do2d(j,do2d_no(j)) = data_output(i)
2591	do2d_unit(j,do2d_no(j)) = unit
2592	IF ( data_output(i)(ilen-2:ilen) == '_xy' ) THEN
2593	data_output_xy(j) = .TRUE.
2594	ENDIF
2595	IF ( data_output(i)(ilen-2:ilen) == '_xz' ) THEN
2596	data_output_xz(j) = .TRUE.
2597	ENDIF
2598	IF ( data_output(i)(ilen-2:ilen) == '_yz' ) THEN
2599	data_output_yz(j) = .TRUE.
2600	ENDIF
2601	ENDIF
2602
2603	IF ( j == 1 ) THEN
2604	!
2605	!-- Check, if variable is already subject to averaging
2606	found = .FALSE.
2607	DO k = 1, doav_n
2608	IF ( TRIM( doav(k) ) == TRIM( var ) ) found = .TRUE.
2609	ENDDO
2610
2611	IF ( .NOT. found ) THEN
2612	doav_n = doav_n + 1
2613	doav(doav_n) = var
2614	ENDIF
2615	ENDIF
2616
2617	i = i + 1
2618	ENDDO
2619
2620	!
2621	!-- Store sectional planes in one shared array
2622	section(:,1) = section_xy
2623	section(:,2) = section_xz
2624	section(:,3) = section_yz
2625
2626	!
2627	!-- Upper plot limit (grid point value) for 1D profiles
2628	IF ( z_max_do1d == -1.0 ) THEN
2629	nz_do1d = nzt+1
2630	ELSE
2631	DO k = nzb+1, nzt+1
2632	nz_do1d = k
2633	IF ( zw(k) > z_max_do1d ) EXIT
2634	ENDDO
2635	ENDIF
2636
2637	!
2638	!-- Upper plot limit for 2D vertical sections
2639	IF ( z_max_do2d == -1.0 ) z_max_do2d = zu(nzt)
2640	IF ( z_max_do2d < zu(nzb+1) .OR. z_max_do2d > zu(nzt) ) THEN
2641	IF ( myid == 0 ) PRINT*, '+++ check_parameters: z_max_do2d=', &
2642	z_max_do2d, ' must be >= ', zu(nzb+1), &
2643	'(zu(nzb+1)) and <= ', zu(nzt), ' (zu(nzt))'
2644	CALL local_stop
2645	ENDIF
2646
2647	!
2648	!-- Upper plot limit for 3D arrays
2649	IF ( nz_do3d == -9999 ) nz_do3d = nzt + 1
2650
2651	!
2652	!-- Determine and check accuracy for compressed 3D plot output
2653	IF ( do3d_compress ) THEN
2654	!
2655	!-- Compression only permissible on T3E machines
2656	IF ( host(1:3) /= 't3e' ) THEN
2657	IF ( myid == 0 ) THEN
2658	PRINT*, '+++ check_parameters: do3d_compress = .TRUE. not allow', &
2659	'ed on host "', TRIM( host ), '"'
2660	ENDIF
2661	CALL local_stop
2662	ENDIF
2663
2664	i = 1
2665	DO WHILE ( do3d_comp_prec(i) /= ' ' )
2666
2667	ilen = LEN_TRIM( do3d_comp_prec(i) )
2668	IF ( LLT( do3d_comp_prec(i)(ilen:ilen), '0' ) .OR. &
2669	LGT( do3d_comp_prec(i)(ilen:ilen), '9' ) ) THEN
2670	IF ( myid == 0 ) THEN
2671	PRINT*, '+++ check_parameters: illegal precision: ', &
2672	'do3d_comp_prec(', i, ')="', TRIM(do3d_comp_prec(i)),'"'
2673	ENDIF
2674	CALL local_stop
2675	ENDIF
2676
2677	prec = IACHAR( do3d_comp_prec(i)(ilen:ilen) ) - IACHAR( '0' )
2678	var = do3d_comp_prec(i)(1:ilen-1)
2679
2680	SELECT CASE ( var )
2681
2682	CASE ( 'u' )
2683	j = 1
2684	CASE ( 'v' )
2685	j = 2
2686	CASE ( 'w' )
2687	j = 3
2688	CASE ( 'p' )
2689	j = 4
2690	CASE ( 'pt' )
2691	j = 5
2692
2693	CASE DEFAULT
2694	IF ( myid == 0 ) THEN
2695	PRINT*, '+++ check_parameters: unknown variable in ', &
2696	'assignment'
2697	PRINT*, ' do3d_comp_prec(', i, ')="', &
2698	TRIM( do3d_comp_prec(i) ),'"'
2699	ENDIF
2700	CALL local_stop
2701
2702	END SELECT
2703
2704	plot_3d_precision(j)%precision = prec
2705	i = i + 1
2706
2707	ENDDO
2708	ENDIF
2709
2710	!
2711	!-- Check the data output format(s)
2712	IF ( data_output_format(1) == ' ' ) THEN
2713	!
2714	!-- Default value
2715	netcdf_output = .TRUE.
2716	ELSE
2717	i = 1
2718	DO WHILE ( data_output_format(i) /= ' ' )
2719
2720	SELECT CASE ( data_output_format(i) )
2721
2722	CASE ( 'netcdf' )
2723	netcdf_output = .TRUE.
2724	CASE ( 'iso2d' )
2725	iso2d_output = .TRUE.
2726	CASE ( 'profil' )
2727	profil_output = .TRUE.
2728	CASE ( 'avs' )
2729	avs_output = .TRUE.
2730
2731	CASE DEFAULT
2732	IF ( myid == 0 ) THEN
2733	PRINT*, '+++ check_parameters:'
2734	PRINT*, ' unknown value for data_output_format "', &
2735	TRIM( data_output_format(i) ),'"'
2736	ENDIF
2737	CALL local_stop
2738
2739	END SELECT
2740
2741	i = i + 1
2742	IF ( i > 10 ) EXIT
2743
2744	ENDDO
2745
2746	ENDIF
2747
2748	!
2749	!-- Check netcdf precison
2750	ldum = .FALSE.
2751	CALL define_netcdf_header( 'ch', ldum, 0 )
2752
2753	!
2754	!-- Check, whether a constant diffusion coefficient shall be used
2755	IF ( km_constant /= -1.0 ) THEN
2756	IF ( km_constant < 0.0 ) THEN
2757	IF ( myid == 0 ) PRINT*, '+++ check_parameters: km_constant=', &
2758	km_constant, ' < 0.0'
2759	CALL local_stop
2760	ELSE
2761	IF ( prandtl_number < 0.0 ) THEN
2762	IF ( myid == 0 ) PRINT*,'+++ check_parameters: prandtl_number=',&
2763	prandtl_number, ' < 0.0'
2764	CALL local_stop
2765	ENDIF
2766	constant_diffusion = .TRUE.
2767
2768	IF ( prandtl_layer ) THEN
2769	IF ( myid == 0 ) PRINT*, '+++ check_parameters: prandtl_layer ',&
2770	'is not allowed with fixed value of km'
2771	CALL local_stop
2772	ENDIF
2773	ENDIF
2774	ENDIF
2775
2776	!
2777	!-- In case of non-cyclic lateral boundaries, set the default maximum value
2778	!-- for the horizontal diffusivity used within the outflow damping layer,
2779	!-- and check/set the width of the damping layer
2780	IF ( bc_lr /= 'cyclic' ) THEN
2781	IF ( km_damp_max == -1.0 ) THEN
2782	km_damp_max = 0.5 * dx
2783	ENDIF
2784	IF ( outflow_damping_width == -1.0 ) THEN
2785	outflow_damping_width = MIN( 20, nx/2 )
2786	ENDIF
2787	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > nx ) THEN
2788	IF ( myid == 0 ) PRINT*, '+++ check_parameters: outflow_damping w',&
2789	'idth out of range'
2790	CALL local_stop
2791	ENDIF
2792	ENDIF
2793
2794	IF ( bc_ns /= 'cyclic' ) THEN
2795	IF ( km_damp_max == -1.0 ) THEN
2796	km_damp_max = 0.5 * dy
2797	ENDIF
2798	IF ( outflow_damping_width == -1.0 ) THEN
2799	outflow_damping_width = MIN( 20, ny/2 )
2800	ENDIF
2801	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > ny ) THEN
2802	IF ( myid == 0 ) PRINT*, '+++ check_parameters: outflow_damping w',&
2803	'idth out of range'
2804	CALL local_stop
2805	ENDIF
2806	ENDIF
2807
2808	!
2809	!-- Check value range for rif
2810	IF ( rif_min >= rif_max ) THEN
2811	IF ( myid == 0 ) PRINT*, '+++ check_parameters: rif_min=', rif_min, &
2812	' must be less than rif_max=', rif_max
2813	CALL local_stop
2814	ENDIF
2815
2816	!
2817	!-- Determine upper and lower hight level indices for random perturbations
2818	IF ( disturbance_level_b == -9999999.9 ) THEN
2819	IF ( ocean ) THEN
2820	disturbance_level_b = zu((nzt*2)/3)
2821	disturbance_level_ind_b = ( nzt * 2 ) / 3
2822	ELSE
2823	disturbance_level_b = zu(nzb+3)
2824	disturbance_level_ind_b = nzb + 3
2825	ENDIF
2826	ELSEIF ( disturbance_level_b < zu(3) ) THEN
2827	IF ( myid == 0 ) PRINT*, '+++ check_parameters: disturbance_level_b=',&
2828	disturbance_level_b, ' must be >= ',zu(3), &
2829	'(zu(3))'
2830	CALL local_stop
2831	ELSEIF ( disturbance_level_b > zu(nzt-2) ) THEN
2832	IF ( myid == 0 ) PRINT*, '+++ check_parameters: disturbance_level_b=',&
2833	disturbance_level_b, ' must be <= ',zu(nzt-2),&
2834	'(zu(nzt-2))'
2835	CALL local_stop
2836	ELSE
2837	DO k = 3, nzt-2
2838	IF ( disturbance_level_b <= zu(k) ) THEN
2839	disturbance_level_ind_b = k
2840	EXIT
2841	ENDIF
2842	ENDDO
2843	ENDIF
2844
2845	IF ( disturbance_level_t == -9999999.9 ) THEN
2846	IF ( ocean ) THEN
2847	disturbance_level_t = zu(nzt-3)
2848	disturbance_level_ind_t = nzt - 3
2849	ELSE
2850	disturbance_level_t = zu(nzt/3)
2851	disturbance_level_ind_t = nzt / 3
2852	ENDIF
2853	ELSEIF ( disturbance_level_t > zu(nzt-2) ) THEN
2854	IF ( myid == 0 ) PRINT*, '+++ check_parameters: disturbance_level_t=',&
2855	disturbance_level_t, ' must be <= ',zu(nzt-2),&
2856	'(zu(nzt-2))'
2857	CALL local_stop
2858	ELSEIF ( disturbance_level_t < disturbance_level_b ) THEN
2859	IF ( myid == 0 ) PRINT*, '+++ check_parameters: disturbance_level_t=',&
2860	disturbance_level_t, ' must be >= ', &
2861	'disturbance_level_b=', disturbance_level_b
2862	CALL local_stop
2863	ELSE
2864	DO k = 3, nzt-2
2865	IF ( disturbance_level_t <= zu(k) ) THEN
2866	disturbance_level_ind_t = k
2867	EXIT
2868	ENDIF
2869	ENDDO
2870	ENDIF
2871
2872	!
2873	!-- Check again whether the levels determined this way are ok.
2874	!-- Error may occur at automatic determination and too few grid points in
2875	!-- z-direction.
2876	IF ( disturbance_level_ind_t < disturbance_level_ind_b ) THEN
2877	IF ( myid == 0 ) PRINT*, '+++ check_parameters: ', &
2878	'disturbance_level_ind_t=', &
2879	disturbance_level_ind_t, ' must be >= ', &
2880	'disturbance_level_ind_b=', &
2881	disturbance_level_ind_b
2882	CALL local_stop
2883	ENDIF
2884
2885	!
2886	!-- Determine the horizontal index range for random perturbations.
2887	!-- In case of non-cyclic horizontal boundaries, no perturbations are imposed
2888	!-- near the inflow and the perturbation area is further limited to ...(1)
2889	!-- after the initial phase of the flow.
2890	dist_nxl = 0; dist_nxr = nx
2891	dist_nys = 0; dist_nyn = ny
2892	IF ( bc_lr /= 'cyclic' ) THEN
2893	IF ( inflow_disturbance_begin == -1 ) THEN
2894	inflow_disturbance_begin = MIN( 10, nx/2 )
2895	ENDIF
2896	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > nx )&
2897	THEN
2898	IF ( myid == 0 ) PRINT*, '+++ check_parameters: inflow_disturbance',&
2899	'_begin out of range'
2900	CALL local_stop
2901	ENDIF
2902	IF ( inflow_disturbance_end == -1 ) THEN
2903	inflow_disturbance_end = MIN( 100, 3*nx/4 )
2904	ENDIF
2905	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > nx ) &
2906	THEN
2907	IF ( myid == 0 ) PRINT*, '+++ check_parameters: inflow_disturbance',&
2908	'_end out of range'
2909	CALL local_stop
2910	ENDIF
2911	ELSEIF ( bc_ns /= 'cyclic' ) THEN
2912	IF ( inflow_disturbance_begin == -1 ) THEN
2913	inflow_disturbance_begin = MIN( 10, ny/2 )
2914	ENDIF
2915	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > ny )&
2916	THEN
2917	IF ( myid == 0 ) PRINT*, '+++ check_parameters: inflow_disturbance',&
2918	'_begin out of range'
2919	CALL local_stop
2920	ENDIF
2921	IF ( inflow_disturbance_end == -1 ) THEN
2922	inflow_disturbance_end = MIN( 100, 3*ny/4 )
2923	ENDIF
2924	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > ny ) &
2925	THEN
2926	IF ( myid == 0 ) PRINT*, '+++ check_parameters: inflow_disturbance',&
2927	'_end out of range'
2928	CALL local_stop
2929	ENDIF
2930	ENDIF
2931
2932	IF ( bc_lr == 'radiation/dirichlet' ) THEN
2933	dist_nxr = nx - inflow_disturbance_begin
2934	dist_nxl(1) = nx - inflow_disturbance_end
2935	ELSEIF ( bc_lr == 'dirichlet/radiation' ) THEN
2936	dist_nxl = inflow_disturbance_begin
2937	dist_nxr(1) = inflow_disturbance_end
2938	ENDIF
2939	IF ( bc_ns == 'dirichlet/radiation' ) THEN
2940	dist_nyn = ny - inflow_disturbance_begin
2941	dist_nys(1) = ny - inflow_disturbance_end
2942	ELSEIF ( bc_ns == 'radiation/dirichlet' ) THEN
2943	dist_nys = inflow_disturbance_begin
2944	dist_nyn(1) = inflow_disturbance_end
2945	ENDIF
2946
2947	!
2948	!-- A turbulent inflow requires Dirichlet conditions at the respective inflow
2949	!-- boundary (so far, a turbulent inflow is realized from the left side only)
2950	IF ( turbulent_inflow .AND. bc_lr /= 'dirichlet/radiation' ) THEN
2951	IF ( myid == 0 ) THEN
2952	PRINT*, '+++ check_parameters:'
2953	PRINT*, ' turbulent_inflow = .T. requires a Dirichlet condition', &
2954	' at the inflow boundary'
2955	ENDIF
2956	CALL local_stop
2957	ENDIF
2958
2959	!
2960	!-- In case of turbulent inflow calculate the index of the recycling plane
2961	IF ( turbulent_inflow ) THEN
2962	IF ( recycling_width == 9999999.9 ) THEN
2963	!
2964	!-- Set the default value for the width of the recycling domain
2965	recycling_width = 0.1 * nx * dx
2966	ELSE
2967	IF ( recycling_width < dx .OR. recycling_width > nx * dx ) THEN
2968	IF ( myid == 0 ) THEN
2969	PRINT*, '+++ check_parameters:'
2970	PRINT*, ' illegal value for recycling_width: ', &
2971	recycling_width
2972	ENDIF
2973	CALL local_stop
2974	ENDIF
2975	ENDIF
2976	!
2977	!-- Calculate the index
2978	recycling_plane = recycling_width / dx
2979	ENDIF
2980
2981	!
2982	!-- Check random generator
2983	IF ( random_generator /= 'system-specific' .AND. &
2984	random_generator /= 'numerical-recipes' ) THEN
2985	IF ( myid == 0 ) THEN
2986	PRINT*, '+++ check_parameters:'
2987	PRINT*, ' unknown random generator: random_generator=', &
2988	random_generator
2989	ENDIF
2990	CALL local_stop
2991	ENDIF
2992
2993	!
2994	!-- Determine damping level index for 1D model
2995	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
2996	IF ( damp_level_1d == -1.0 ) THEN
2997	damp_level_1d = zu(nzt+1)
2998	damp_level_ind_1d = nzt + 1
2999	ELSEIF ( damp_level_1d < 0.0 .OR. damp_level_1d > zu(nzt+1) ) THEN
3000	IF ( myid == 0 ) PRINT*, '+++ check_parameters: damp_level_1d=', &
3001	damp_level_1d, ' must be > 0.0 and < ', &
3002	'zu(nzt+1)', zu(nzt+1)
3003	CALL local_stop
3004	ELSE
3005	DO k = 1, nzt+1
3006	IF ( damp_level_1d <= zu(k) ) THEN
3007	damp_level_ind_1d = k
3008	EXIT
3009	ENDIF
3010	ENDDO
3011	ENDIF
3012	ENDIF
3013	!
3014	!-- Check some other 1d-model parameters
3015	IF ( TRIM( mixing_length_1d ) /= 'as_in_3d_model' .AND. &
3016	TRIM( mixing_length_1d ) /= 'blackadar' ) THEN
3017	IF ( myid == 0 ) PRINT*, '+++ check_parameters: mixing_length_1d = "', &
3018	TRIM( mixing_length_1d ), '" is unknown'
3019	CALL local_stop
3020	ENDIF
3021	IF ( TRIM( dissipation_1d ) /= 'as_in_3d_model' .AND. &
3022	TRIM( dissipation_1d ) /= 'detering' ) THEN
3023	IF ( myid == 0 ) PRINT*, '+++ check_parameters: dissipation_1d = "', &
3024	TRIM( dissipation_1d ), '" is unknown'
3025	CALL local_stop
3026	ENDIF
3027
3028	!
3029	!-- Set time for the next user defined restart (time_restart is the
3030	!-- internal parameter for steering restart events)
3031	IF ( restart_time /= 9999999.9 ) THEN
3032	IF ( restart_time > simulated_time ) time_restart = restart_time
3033	ELSE
3034	!
3035	!-- In case of a restart run, set internal parameter to default (no restart)
3036	!-- if the NAMELIST-parameter restart_time is omitted
3037	time_restart = 9999999.9
3038	ENDIF
3039
3040	!
3041	!-- Set default value of the time needed to terminate a model run
3042	IF ( termination_time_needed == -1.0 ) THEN
3043	IF ( host(1:3) == 'ibm' ) THEN
3044	termination_time_needed = 300.0
3045	ELSE
3046	termination_time_needed = 35.0
3047	ENDIF
3048	ENDIF
3049
3050	!
3051	!-- Check the time needed to terminate a model run
3052	IF ( host(1:3) == 't3e' ) THEN
3053	!
3054	!-- Time needed must be at least 30 seconds on all CRAY machines, because
3055	!-- MPP_TREMAIN gives the remaining CPU time only in steps of 30 seconds
3056	IF ( termination_time_needed <= 30.0 ) THEN
3057	IF ( myid == 0 ) THEN
3058	PRINT*, '+++ check_parameters: termination_time_needed', &
3059	termination_time_needed
3060	PRINT*, ' must be > 30.0 on host "', host, &
3061	'"'
3062	ENDIF
3063	CALL local_stop
3064	ENDIF
3065	ELSEIF ( host(1:3) == 'ibm' ) THEN
3066	!
3067	!-- On IBM-regatta machines the time should be at least 300 seconds,
3068	!-- because the job time consumed before executing palm (for compiling,
3069	!-- copying of files, etc.) has to be regarded
3070	IF ( termination_time_needed < 300.0 ) THEN
3071	IF ( myid == 0 ) THEN
3072	PRINT*, '+++ WARNING: check_parameters: termination_time_', &
3073	'needed', termination_time_needed
3074	PRINT*, ' should be >= 300.0', &
3075	' on host "', host, '"'
3076	ENDIF
3077	ENDIF
3078	ENDIF
3079
3080
3081	END SUBROUTINE check_parameters

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |