Home

Context Navigation

check_parameters.f90 @ 133

Last change on this file since 133 was 132, checked in by letzel, 16 years ago

Vertical profiles now based on nzb_s_inner; they are divided by
ngp_2dh_s_inner (scalars, procucts of scalars and velocity components) and
ngp_2dh (staggered velocity components and their products), respectively.

Allow new case bc_uv_t = 'dirichlet_0' for channel flow.

Property svn:keywords set to Id

File size: 109.7 KB

Line
1	SUBROUTINE check_parameters
2
3	!------------------------------------------------------------------------------!
4	! Actual revisions:
5	! -----------------
6	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
7	! Multigrid solver allows topography, checking of dt_sort_particles
8	! Bugfix: initializing u_init and v_init in case of ocean runs
9	!
10	! Former revisions:
11	! -----------------
12	! $Id: check_parameters.f90 132 2007-11-20 09:46:11Z letzel $
13	!
14	! 109 2007-08-28 15:26:47Z letzel
15	! Check coupling_mode and set default (obligatory) values (like boundary
16	! conditions for temperature and fluxes) in case of coupled runs.
17	! +profiles for wp and w"e
18	! Bugfix: Error message concerning output of particle concentration (pc)
19	! modified
20	! More checks and more default values for coupled runs
21	! allow data_output_pr= q, wq, w"q", wq for humidity = .T. (instead of
22	! cloud_physics = .T.)
23	! Rayleigh damping for ocean fixed.
24	! Check and, if necessary, set default value for dt_coupling
25	!
26	! 97 2007-06-21 08:23:15Z raasch
27	! Initial salinity profile is calculated, salinity boundary conditions are
28	! checked,
29	! z_max_do1d is checked only in case of ocean = .f.,
30	! +initial temperature and geostrophic velocity profiles for the ocean version,
31	! use_pt_reference renamed use_reference
32	!
33	! 89 2007-05-25 12:08:31Z raasch
34	! Check for user-defined profiles
35	!
36	! 75 2007-03-22 09:54:05Z raasch
37	! "by_user" allowed as initializing action, -data_output_ts,
38	! leapfrog with non-flat topography not allowed any more, loop_optimization
39	! and pt_reference are checked, moisture renamed humidity,
40	! output of precipitation amount/rate and roughnes length + check
41	! possible negative humidities are avoided in initial profile,
42	! dirichlet/neumann changed to dirichlet/radiation, etc.,
43	! revision added to run_description_header
44	!
45	! 20 2007-02-26 00:12:32Z raasch
46	! Temperature and humidity gradients at top are now calculated for nzt+1,
47	! top_heatflux and respective boundary condition bc_pt_t is checked
48	!
49	! RCS Log replace by Id keyword, revision history cleaned up
50	!
51	! Revision 1.61 2006/08/04 14:20:25 raasch
52	! do2d_unit and do3d_unit now defined as 2d-arrays, check of
53	! use_upstream_for_tke, default value for dt_dopts,
54	! generation of file header moved from routines palm and header to here
55	!
56	! Revision 1.1 1997/08/26 06:29:23 raasch
57	! Initial revision
58	!
59	!
60	! Description:
61	! ------------
62	! Check control parameters and deduce further quantities.
63	!------------------------------------------------------------------------------!
64
65	USE arrays_3d
66	USE constants
67	USE control_parameters
68	USE grid_variables
69	USE indices
70	USE model_1d
71	USE netcdf_control
72	USE particle_attributes
73	USE pegrid
74	USE profil_parameter
75	USE statistics
76	USE transpose_indices
77
78	IMPLICIT NONE
79
80	CHARACTER (LEN=1) :: sq
81	CHARACTER (LEN=6) :: var
82	CHARACTER (LEN=7) :: unit
83	CHARACTER (LEN=8) :: date
84	CHARACTER (LEN=10) :: time
85	CHARACTER (LEN=40) :: coupling_string
86	CHARACTER (LEN=100) :: action
87
88	INTEGER :: i, ilen, intervals, iremote = 0, iter, j, k, nnxh, nnyh, &
89	position, prec
90	LOGICAL :: found, ldum
91	REAL :: gradient, maxn, maxp, remote = 0.0
92
93	!
94	!-- Warning, if host is not set
95	IF ( host(1:1) == ' ' ) THEN
96	IF ( myid == 0 ) THEN
97	PRINT*, '+++ WARNING: check_parameters:'
98	PRINT*, ' "host" is not set. Please check that environment', &
99	' variable "localhost"'
100	PRINT*, ' is set before running PALM'
101	ENDIF
102	ENDIF
103
104	!
105	!-- Check the coupling mode
106	IF ( coupling_mode /= 'uncoupled' .AND. &
107	coupling_mode /= 'atmosphere_to_ocean' .AND. &
108	coupling_mode /= 'ocean_to_atmosphere' ) THEN
109	IF ( myid == 0 ) THEN
110	PRINT*, '+++ check_parameters:'
111	PRINT*, ' illegal coupling mode: ', TRIM( coupling_mode )
112	ENDIF
113	CALL local_stop
114	ENDIF
115
116	!
117	!-- Check dt_coupling, restart_time, dt_restart, end_time, dx, dy, nx and ny
118	IF ( coupling_mode /= 'uncoupled' ) THEN
119	IF ( dt_coupling == 9999999.9 ) THEN
120	IF ( myid == 0 ) THEN
121	PRINT*, '+++ check_parameters:'
122	PRINT*, ' dt_coupling is not set but required for coupling ', &
123	'mode: ', TRIM( coupling_mode )
124	ENDIF
125	CALL local_stop
126	ENDIF
127	#if defined( __parallel ) && defined( __mpi2 )
128	CALL MPI_SEND( dt_coupling, 1, MPI_REAL, myid, 11, comm_inter, ierr )
129	CALL MPI_RECV( remote, 1, MPI_REAL, myid, 11, comm_inter, status, ierr )
130	IF ( dt_coupling /= remote ) THEN
131	IF ( myid == 0 ) THEN
132	PRINT*, '+++ check_parameters:'
133	PRINT*, ' TRIM( coupling_mode ): dt_coupling = ', dt_coupling
134	PRINT*, ' is not equal to dt_coupling_remote = ', remote
135	ENDIF
136	CALL local_stop
137	ENDIF
138	IF ( dt_coupling <= 0.0 ) THEN
139	CALL MPI_SEND( dt_max, 1, MPI_REAL, myid, 19, comm_inter, ierr )
140	CALL MPI_RECV( remote, 1, MPI_REAL, myid, 19, comm_inter, status, &
141	ierr )
142	dt_coupling = MAX( dt_max, remote )
143	IF ( myid == 0 ) THEN
144	PRINT*, '+++ check_parameters:'
145	PRINT*, ' TRIM( coupling_mode ): dt_coupling <= 0.0'
146	PRINT*, ' is not allowed and is reset to MAX(dt_max(A,O)) = ', &
147	dt_coupling
148	ENDIF
149	ENDIF
150	CALL MPI_SEND( restart_time, 1, MPI_REAL, myid, 12, comm_inter, ierr )
151	CALL MPI_RECV( remote, 1, MPI_REAL, myid, 12, comm_inter, status, ierr )
152	IF ( restart_time /= remote ) THEN
153	IF ( myid == 0 ) THEN
154	PRINT*, '+++ check_parameters:'
155	PRINT*, ' TRIM( coupling_mode ): restart_time = ', restart_time
156	PRINT*, ' is not equal to restart_time_remote = ', remote
157	ENDIF
158	CALL local_stop
159	ENDIF
160	CALL MPI_SEND( dt_restart, 1, MPI_REAL, myid, 13, comm_inter, ierr )
161	CALL MPI_RECV( remote, 1, MPI_REAL, myid, 13, comm_inter, status, ierr )
162	IF ( dt_restart /= remote ) THEN
163	IF ( myid == 0 ) THEN
164	PRINT*, '+++ check_parameters:'
165	PRINT*, ' TRIM( coupling_mode ): dt_restart = ', dt_restart
166	PRINT*, ' is not equal to dt_restart_remote = ', remote
167	ENDIF
168	CALL local_stop
169	ENDIF
170	CALL MPI_SEND( end_time, 1, MPI_REAL, myid, 14, comm_inter, ierr )
171	CALL MPI_RECV( remote, 1, MPI_REAL, myid, 14, comm_inter, status, ierr )
172	IF ( end_time /= remote ) THEN
173	IF ( myid == 0 ) THEN
174	PRINT*, '+++ check_parameters:'
175	PRINT*, ' TRIM( coupling_mode ): end_time = ', end_time
176	PRINT*, ' is not equal to end_time_remote = ', remote
177	ENDIF
178	CALL local_stop
179	ENDIF
180	CALL MPI_SEND( dx, 1, MPI_REAL, myid, 15, comm_inter, ierr )
181	CALL MPI_RECV( remote, 1, MPI_REAL, myid, 15, comm_inter, status, ierr )
182	IF ( dx /= remote ) THEN
183	IF ( myid == 0 ) THEN
184	PRINT*, '+++ check_parameters:'
185	PRINT*, ' TRIM( coupling_mode ): dx = ', dx
186	PRINT*, ' is not equal to dx_remote = ', remote
187	ENDIF
188	CALL local_stop
189	ENDIF
190	CALL MPI_SEND( dy, 1, MPI_REAL, myid, 16, comm_inter, ierr )
191	CALL MPI_RECV( remote, 1, MPI_REAL, myid, 16, comm_inter, status, ierr )
192	IF ( dy /= remote ) THEN
193	IF ( myid == 0 ) THEN
194	PRINT*, '+++ check_parameters:'
195	PRINT*, ' TRIM( coupling_mode ): dy = ', dy
196	PRINT*, ' is not equal to dy_remote = ', remote
197	ENDIF
198	CALL local_stop
199	ENDIF
200	CALL MPI_SEND( nx, 1, MPI_INTEGER, myid, 17, comm_inter, ierr )
201	CALL MPI_RECV( iremote, 1, MPI_INTEGER, myid, 17, comm_inter, status, &
202	ierr )
203	IF ( nx /= iremote ) THEN
204	IF ( myid == 0 ) THEN
205	PRINT*, '+++ check_parameters:'
206	PRINT*, ' TRIM( coupling_mode ): nx = ', nx
207	PRINT*, ' is not equal to nx_remote = ', iremote
208	ENDIF
209	CALL local_stop
210	ENDIF
211	CALL MPI_SEND( ny, 1, MPI_INTEGER, myid, 18, comm_inter, ierr )
212	CALL MPI_RECV( iremote, 1, MPI_INTEGER, myid, 18, comm_inter, status, &
213	ierr )
214	IF ( ny /= iremote ) THEN
215	IF ( myid == 0 ) THEN
216	PRINT*, '+++ check_parameters:'
217	PRINT*, ' TRIM( coupling_mode ): ny = ', ny
218	PRINT*, ' is not equal to ny_remote = ', iremote
219	ENDIF
220	CALL local_stop
221	ENDIF
222	#endif
223	ENDIF
224
225	#if defined( __parallel ) && defined( __mpi2 )
226	!
227	!-- Exchange via intercommunicator
228	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
229	CALL MPI_SEND( humidity, &
230	1, MPI_LOGICAL, myid, 19, comm_inter, ierr )
231	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
232	CALL MPI_RECV( humidity_remote, &
233	1, MPI_LOGICAL, myid, 19, comm_inter, status, ierr )
234	ENDIF
235	#endif
236
237
238	!
239	!-- Generate the file header which is used as a header for most of PALM's
240	!-- output files
241	CALL DATE_AND_TIME( date, time )
242	run_date = date(7:8)//'-'//date(5:6)//'-'//date(3:4)
243	run_time = time(1:2)//':'//time(3:4)//':'//time(5:6)
244	IF ( coupling_mode == 'uncoupled' ) THEN
245	coupling_string = ''
246	ELSEIF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
247	coupling_string = ' coupled (atmosphere)'
248	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
249	coupling_string = ' coupled (ocean)'
250	ENDIF
251
252	WRITE ( run_description_header, &
253	'(A,2X,A,2X,A,A,A,I2.2,A,2X,A,A,2X,A,1X,A)' ) &
254	TRIM( version ), TRIM( revision ), 'run: ', &
255	TRIM( run_identifier ), '.', runnr, TRIM( coupling_string ), &
256	'host: ', TRIM( host ), run_date, run_time
257
258	!
259	!-- Check the general loop optimization method
260	IF ( loop_optimization == 'default' ) THEN
261	IF ( host(1:3) == 'nec' ) THEN
262	loop_optimization = 'vector'
263	ELSE
264	loop_optimization = 'cache'
265	ENDIF
266	ENDIF
267	IF ( loop_optimization /= 'noopt' .AND. loop_optimization /= 'cache' &
268	.AND. loop_optimization /= 'vector' ) THEN
269	IF ( myid == 0 ) THEN
270	PRINT*, '+++ check_parameters:'
271	PRINT*, ' illegal value given for loop_optimization: ', &
272	TRIM( loop_optimization )
273	ENDIF
274	CALL local_stop
275	ENDIF
276
277	!
278	!-- Check topography setting (check for illegal parameter combinations)
279	IF ( topography /= 'flat' ) THEN
280	action = ' '
281	IF ( scalar_advec /= 'pw-scheme' ) THEN
282	WRITE( action, '(A,A)' ) 'scalar_advec = ', scalar_advec
283	ENDIF
284	IF ( momentum_advec /= 'pw-scheme' ) THEN
285	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
286	ENDIF
287	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
288	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
289	ENDIF
290	IF ( psolver == 'sor' ) THEN
291	WRITE( action, '(A,A)' ) 'psolver = ', psolver
292	ENDIF
293	IF ( sloping_surface ) THEN
294	WRITE( action, '(A)' ) 'sloping surface = .TRUE.'
295	ENDIF
296	IF ( galilei_transformation ) THEN
297	WRITE( action, '(A)' ) 'galilei_transformation = .TRUE.'
298	ENDIF
299	IF ( cloud_physics ) THEN
300	WRITE( action, '(A)' ) 'cloud_physics = .TRUE.'
301	ENDIF
302	IF ( cloud_droplets ) THEN
303	WRITE( action, '(A)' ) 'cloud_droplets = .TRUE.'
304	ENDIF
305	IF ( humidity ) THEN
306	WRITE( action, '(A)' ) 'humidity = .TRUE.'
307	ENDIF
308	IF ( .NOT. prandtl_layer ) THEN
309	WRITE( action, '(A)' ) 'prandtl_layer = .FALSE.'
310	ENDIF
311	IF ( action /= ' ' ) THEN
312	IF ( myid == 0 ) THEN
313	PRINT*, '+++ check_parameters:'
314	PRINT*, ' a non-flat topography does not allow ', TRIM( action )
315	ENDIF
316	CALL local_stop
317	ENDIF
318	ENDIF
319
320	!
321	!-- Check ocean setting
322	IF ( ocean ) THEN
323	action = ' '
324	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
325	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
326	ENDIF
327	IF ( momentum_advec == 'ups-scheme' ) THEN
328	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
329	ENDIF
330	IF ( action /= ' ' ) THEN
331	IF ( myid == 0 ) THEN
332	PRINT*, '+++ check_parameters:'
333	PRINT*, ' ocean = .T. does not allow ', TRIM( action )
334	ENDIF
335	CALL local_stop
336	ENDIF
337	ENDIF
338
339	!
340	!-- Check whether there are any illegal values
341	!-- Pressure solver:
342	IF ( psolver /= 'poisfft' .AND. psolver /= 'poisfft_hybrid' .AND. &
343	psolver /= 'sor' .AND. psolver /= 'multigrid' ) THEN
344	IF ( myid == 0 ) THEN
345	PRINT*, '+++ check_parameters:'
346	PRINT*, ' unknown solver for perturbation pressure: psolver=', &
347	psolver
348	ENDIF
349	CALL local_stop
350	ENDIF
351
352	#if defined( __parallel )
353	IF ( psolver == 'poisfft_hybrid' .AND. pdims(2) /= 1 ) THEN
354	IF ( myid == 0 ) THEN
355	PRINT*, '+++ check_parameters:'
356	PRINT*, ' psolver="', TRIM( psolver ), '" only works for a ', &
357	'1d domain-decomposition along x'
358	PRINT*, ' please do not set npey/=1 in the parameter file'
359	ENDIF
360	CALL local_stop
361	ENDIF
362	IF ( ( psolver == 'poisfft_hybrid' .OR. psolver == 'multigrid' ) .AND. &
363	( nxra > nxr .OR. nyna > nyn .OR. nza > nz ) ) THEN
364	IF ( myid == 0 ) THEN
365	PRINT*, '+++ check_parameters:'
366	PRINT*, ' psolver="', TRIM( psolver ), '" does not work for ', &
367	'subdomains with unequal size'
368	PRINT*, ' please set grid_matching = ''strict'' in the parameter',&
369	' file'
370	ENDIF
371	CALL local_stop
372	ENDIF
373	#else
374	IF ( psolver == 'poisfft_hybrid' ) THEN
375	IF ( myid == 0 ) THEN
376	PRINT*, '+++ check_parameters:'
377	PRINT*, ' psolver="', TRIM( psolver ), '" only works for a ', &
378	'parallel environment'
379	ENDIF
380	CALL local_stop
381	ENDIF
382	#endif
383
384	IF ( psolver == 'multigrid' ) THEN
385	IF ( cycle_mg == 'w' ) THEN
386	gamma_mg = 2
387	ELSEIF ( cycle_mg == 'v' ) THEN
388	gamma_mg = 1
389	ELSE
390	IF ( myid == 0 ) THEN
391	PRINT*, '+++ check_parameters:'
392	PRINT*, ' unknown multigrid cycle: cycle_mg=', cycle_mg
393	ENDIF
394	CALL local_stop
395	ENDIF
396	ENDIF
397
398	IF ( fft_method /= 'singleton-algorithm' .AND. &
399	fft_method /= 'temperton-algorithm' .AND. &
400	fft_method /= 'system-specific' ) THEN
401	IF ( myid == 0 ) THEN
402	PRINT*, '+++ check_parameters:'
403	PRINT*, ' unknown fft-algorithm: fft_method=', fft_method
404	ENDIF
405	CALL local_stop
406	ENDIF
407
408	!
409	!-- Advection schemes:
410	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ups-scheme' ) &
411	THEN
412	IF ( myid == 0 ) PRINT*, '+++ check_parameters: unknown advection ', &
413	'scheme: momentum_advec=', momentum_advec
414	CALL local_stop
415	ENDIF
416	IF ( ( momentum_advec == 'ups-scheme' .OR. scalar_advec == 'ups-scheme' )&
417	.AND. timestep_scheme /= 'euler' ) THEN
418	IF ( myid == 0 ) PRINT*, '+++ check_parameters: momentum_advec=', &
419	momentum_advec, ' is not allowed with ', &
420	'timestep_scheme=', timestep_scheme
421	CALL local_stop
422	ENDIF
423
424	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'bc-scheme' .AND.&
425	scalar_advec /= 'ups-scheme' ) THEN
426	IF ( myid == 0 ) PRINT*, '+++ check_parameters: unknown advection ', &
427	'scheme: scalar_advec=', scalar_advec
428	CALL local_stop
429	ENDIF
430
431	IF ( use_sgs_for_particles .AND. .NOT. use_upstream_for_tke ) THEN
432	use_upstream_for_tke = .TRUE.
433	IF ( myid == 0 ) THEN
434	PRINT*, '+++ WARNING: check_parameters: use_upstream_for_tke set ', &
435	'.TRUE. because use_sgs_for_particles = .TRUE.'
436	ENDIF
437	ENDIF
438
439	IF ( use_upstream_for_tke .AND. timestep_scheme(1:8) == 'leapfrog' ) THEN
440	IF ( myid == 0 ) THEN
441	PRINT*, '+++ check_parameters: use_upstream_for_tke = .TRUE. ', &
442	'not allowed with timestep_scheme=', timestep_scheme
443	ENDIF
444	CALL local_stop
445	ENDIF
446
447	!
448	!-- Timestep schemes:
449	SELECT CASE ( TRIM( timestep_scheme ) )
450
451	CASE ( 'euler' )
452	intermediate_timestep_count_max = 1
453	asselin_filter_factor = 0.0
454
455	CASE ( 'leapfrog', 'leapfrog+euler' )
456	intermediate_timestep_count_max = 1
457
458	CASE ( 'runge-kutta-2' )
459	intermediate_timestep_count_max = 2
460	asselin_filter_factor = 0.0
461
462	CASE ( 'runge-kutta-3' )
463	intermediate_timestep_count_max = 3
464	asselin_filter_factor = 0.0
465
466	CASE DEFAULT
467	IF ( myid == 0 ) PRINT*, '+++ check_parameters: unknown timestep ',&
468	'scheme: timestep_scheme=', timestep_scheme
469	CALL local_stop
470
471	END SELECT
472
473	IF ( scalar_advec == 'ups-scheme' .AND. timestep_scheme(1:5) == 'runge' )&
474	THEN
475	IF ( myid == 0 ) THEN
476	PRINT*, '+++ check_parameters: scalar advection scheme "', &
477	TRIM( scalar_advec ), '"'
478	PRINT*, ' does not work with timestep_scheme "', &
479	TRIM( timestep_scheme ), '"'
480	ENDIF
481	CALL local_stop
482	ENDIF
483
484	IF ( momentum_advec /= 'pw-scheme' .AND. timestep_scheme(1:5) == 'runge' ) &
485	THEN
486	IF ( myid == 0 ) THEN
487	PRINT*, '+++ check_parameters: momentum advection scheme "', &
488	TRIM( momentum_advec ), '"'
489	PRINT*, ' does not work with timestep_scheme "', &
490	TRIM( timestep_scheme ), '"'
491	ENDIF
492	CALL local_stop
493	ENDIF
494
495
496	IF ( initializing_actions == ' ' ) THEN
497	IF ( myid == 0 ) THEN
498	PRINT*, '+++ check parameters:'
499	PRINT*, ' no value found for initializing_actions'
500	ENDIF
501	CALL local_stop
502	ENDIF
503
504	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
505	!
506	!-- No model continuation run; several initialising actions are possible
507	action = initializing_actions
508	DO WHILE ( TRIM( action ) /= '' )
509	position = INDEX( action, ' ' )
510	SELECT CASE ( action(1:position-1) )
511
512	CASE ( 'set_constant_profiles', 'set_1d-model_profiles', &
513	'by_user', 'initialize_vortex', 'initialize_ptanom' )
514	action = action(position+1:)
515
516	CASE DEFAULT
517	IF ( myid == 0 ) PRINT*, '+++ check_parameters: initializi', &
518	'ng_action unkown or not allowed: action = "', &
519	TRIM(action), '"'
520	CALL local_stop
521
522	END SELECT
523	ENDDO
524	ENDIF
525	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
526	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
527	IF ( myid == 0 ) PRINT*, '+++ check_parameters: initializing_actions', &
528	'"set_constant_profiles" and "set_1d-model_profiles" are not', &
529	' allowed simultaneously'
530	CALL local_stop
531	ENDIF
532	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
533	INDEX( initializing_actions, 'by_user' ) /= 0 ) THEN
534	IF ( myid == 0 ) PRINT*, '+++ check_parameters: initializing_actions', &
535	'"set_constant_profiles" and "by_user" are not', &
536	' allowed simultaneously'
537	CALL local_stop
538	ENDIF
539	IF ( INDEX( initializing_actions, 'by_user' ) /= 0 .AND. &
540	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
541	IF ( myid == 0 ) PRINT*, '+++ check_parameters: initializing_actions', &
542	'"by_user" and "set_1d-model_profiles" are not', &
543	' allowed simultaneously'
544	CALL local_stop
545	ENDIF
546
547	IF ( cloud_physics .AND. .NOT. humidity ) THEN
548	IF ( myid == 0 ) PRINT*, '+++ check_parameters: cloud_physics =', &
549	cloud_physics, ' is not allowed with ', &
550	'humidity =', humidity
551	CALL local_stop
552	ENDIF
553
554	IF ( precipitation .AND. .NOT. cloud_physics ) THEN
555	IF ( myid == 0 ) PRINT*, '+++ check_parameters: precipitation =', &
556	precipitation, ' is not allowed with ', &
557	'cloud_physics =', cloud_physics
558	CALL local_stop
559	ENDIF
560
561	IF ( humidity .AND. sloping_surface ) THEN
562	IF ( myid == 0 ) PRINT*, '+++ check_parameters: humidity = TRUE', &
563	'and hang = TRUE are not', &
564	' allowed simultaneously'
565	CALL local_stop
566	ENDIF
567
568	IF ( humidity .AND. scalar_advec == 'ups-scheme' ) THEN
569	IF ( myid == 0 ) PRINT*, '+++ check_parameters: UPS-scheme', &
570	'is not implemented for humidity'
571	CALL local_stop
572	ENDIF
573
574	IF ( passive_scalar .AND. humidity ) THEN
575	IF ( myid == 0 ) PRINT*, '+++ check_parameters: humidity = TRUE and', &
576	'passive_scalar = TRUE is not allowed ', &
577	'simultaneously'
578	CALL local_stop
579	ENDIF
580
581	IF ( passive_scalar .AND. scalar_advec == 'ups-scheme' ) THEN
582	IF ( myid == 0 ) PRINT*, '+++ check_parameters: UPS-scheme', &
583	'is not implemented for passive_scalar'
584	CALL local_stop
585	ENDIF
586
587	IF ( grid_matching /= 'strict' .AND. grid_matching /= 'match' ) THEN
588	IF ( myid == 0 ) PRINT*, '+++ check_parameters: illegal value "', &
589	TRIM( grid_matching ), &
590	'" found for parameter grid_matching'
591	CALL local_stop
592	ENDIF
593
594	!
595	!-- In case of no model continuation run, check initialising parameters and
596	!-- deduce further quantities
597	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
598
599	!
600	!-- Initial profiles for 1D and 3D model, respectively
601	u_init = ug_surface
602	v_init = vg_surface
603	pt_init = pt_surface
604	IF ( humidity ) q_init = q_surface
605	IF ( ocean ) sa_init = sa_surface
606	IF ( passive_scalar ) q_init = s_surface
607
608	!
609	!--
610	!-- If required, compute initial profile of the geostrophic wind
611	!-- (component ug)
612	i = 1
613	gradient = 0.0
614
615	IF ( .NOT. ocean ) THEN
616
617	ug_vertical_gradient_level_ind(1) = 0
618	ug(0) = ug_surface
619	DO k = 1, nzt+1
620	IF ( ug_vertical_gradient_level(i) < zu(k) .AND. &
621	ug_vertical_gradient_level(i) >= 0.0 ) THEN
622	gradient = ug_vertical_gradient(i) / 100.0
623	ug_vertical_gradient_level_ind(i) = k - 1
624	i = i + 1
625	IF ( i > 10 ) THEN
626	IF ( myid == 0 ) THEN
627	PRINT*, '+++ check_parameters: upper bound 10 of array', &
628	' "ug_vertical_gradient_level_ind" exceeded'
629	ENDIF
630	CALL local_stop
631	ENDIF
632	ENDIF
633	IF ( gradient /= 0.0 ) THEN
634	IF ( k /= 1 ) THEN
635	ug(k) = ug(k-1) + dzu(k) * gradient
636	ELSE
637	ug(k) = ug_surface + 0.5 * dzu(k) * gradient
638	ENDIF
639	ELSE
640	ug(k) = ug(k-1)
641	ENDIF
642	ENDDO
643
644	ELSE
645
646	ug_vertical_gradient_level_ind(1) = nzt+1
647	ug(nzt+1) = ug_surface
648	DO k = nzt, 0, -1
649	IF ( ug_vertical_gradient_level(i) > zu(k) .AND. &
650	ug_vertical_gradient_level(i) <= 0.0 ) THEN
651	gradient = ug_vertical_gradient(i) / 100.0
652	ug_vertical_gradient_level_ind(i) = k + 1
653	i = i + 1
654	IF ( i > 10 ) THEN
655	IF ( myid == 0 ) THEN
656	PRINT*, '+++ check_parameters: upper bound 10 of array', &
657	' "ug_vertical_gradient_level_ind" exceeded'
658	ENDIF
659	CALL local_stop
660	ENDIF
661	ENDIF
662	IF ( gradient /= 0.0 ) THEN
663	IF ( k /= nzt ) THEN
664	ug(k) = ug(k+1) - dzu(k+1) * gradient
665	ELSE
666	ug(k) = ug_surface - 0.5 * dzu(k+1) * gradient
667	ug(k+1) = ug_surface + 0.5 * dzu(k+1) * gradient
668	ENDIF
669	ELSE
670	ug(k) = ug(k+1)
671	ENDIF
672	ENDDO
673
674	ENDIF
675
676	u_init = ug
677
678	!
679	!-- In case of no given gradients for ug, choose a vanishing gradient
680	IF ( ug_vertical_gradient_level(1) == -9999999.9 ) THEN
681	ug_vertical_gradient_level(1) = 0.0
682	ENDIF
683
684	!
685	!--
686	!-- If required, compute initial profile of the geostrophic wind
687	!-- (component vg)
688	i = 1
689	gradient = 0.0
690
691	IF ( .NOT. ocean ) THEN
692
693	vg_vertical_gradient_level_ind(1) = 0
694	vg(0) = vg_surface
695	DO k = 1, nzt+1
696	IF ( vg_vertical_gradient_level(i) < zu(k) .AND. &
697	vg_vertical_gradient_level(i) >= 0.0 ) THEN
698	gradient = vg_vertical_gradient(i) / 100.0
699	vg_vertical_gradient_level_ind(i) = k - 1
700	i = i + 1
701	IF ( i > 10 ) THEN
702	IF ( myid == 0 ) THEN
703	PRINT*, '+++ check_parameters: upper bound 10 of array', &
704	' "vg_vertical_gradient_level_ind" exceeded'
705	ENDIF
706	CALL local_stop
707	ENDIF
708	ENDIF
709	IF ( gradient /= 0.0 ) THEN
710	IF ( k /= 1 ) THEN
711	vg(k) = vg(k-1) + dzu(k) * gradient
712	ELSE
713	vg(k) = vg_surface + 0.5 * dzu(k) * gradient
714	ENDIF
715	ELSE
716	vg(k) = vg(k-1)
717	ENDIF
718	ENDDO
719
720	ELSE
721
722	vg_vertical_gradient_level_ind(1) = nzt+1
723	vg(nzt+1) = vg_surface
724	DO k = nzt, 0, -1
725	IF ( vg_vertical_gradient_level(i) > zu(k) .AND. &
726	vg_vertical_gradient_level(i) <= 0.0 ) THEN
727	gradient = vg_vertical_gradient(i) / 100.0
728	vg_vertical_gradient_level_ind(i) = k + 1
729	i = i + 1
730	IF ( i > 10 ) THEN
731	IF ( myid == 0 ) THEN
732	PRINT*, '+++ check_parameters: upper bound 10 of array', &
733	' "vg_vertical_gradient_level_ind" exceeded'
734	ENDIF
735	CALL local_stop
736	ENDIF
737	ENDIF
738	IF ( gradient /= 0.0 ) THEN
739	IF ( k /= nzt ) THEN
740	vg(k) = vg(k+1) - dzu(k+1) * gradient
741	ELSE
742	vg(k) = vg_surface - 0.5 * dzu(k+1) * gradient
743	vg(k+1) = vg_surface + 0.5 * dzu(k+1) * gradient
744	ENDIF
745	ELSE
746	vg(k) = vg(k+1)
747	ENDIF
748	ENDDO
749
750	ENDIF
751
752	v_init = vg
753
754	!
755	!-- In case of no given gradients for vg, choose a vanishing gradient
756	IF ( vg_vertical_gradient_level(1) == -9999999.9 ) THEN
757	vg_vertical_gradient_level(1) = 0.0
758	ENDIF
759
760	!
761	!-- Compute initial temperature profile using the given temperature gradients
762	i = 1
763	gradient = 0.0
764
765	IF ( .NOT. ocean ) THEN
766
767	pt_vertical_gradient_level_ind(1) = 0
768	DO k = 1, nzt+1
769	IF ( pt_vertical_gradient_level(i) < zu(k) .AND. &
770	pt_vertical_gradient_level(i) >= 0.0 ) THEN
771	gradient = pt_vertical_gradient(i) / 100.0
772	pt_vertical_gradient_level_ind(i) = k - 1
773	i = i + 1
774	IF ( i > 10 ) THEN
775	IF ( myid == 0 ) THEN
776	PRINT*, '+++ check_parameters: upper bound 10 of array', &
777	' "pt_vertical_gradient_level_ind" exceeded'
778	ENDIF
779	CALL local_stop
780	ENDIF
781	ENDIF
782	IF ( gradient /= 0.0 ) THEN
783	IF ( k /= 1 ) THEN
784	pt_init(k) = pt_init(k-1) + dzu(k) * gradient
785	ELSE
786	pt_init(k) = pt_surface + 0.5 * dzu(k) * gradient
787	ENDIF
788	ELSE
789	pt_init(k) = pt_init(k-1)
790	ENDIF
791	ENDDO
792
793	ELSE
794
795	pt_vertical_gradient_level_ind(1) = nzt+1
796	DO k = nzt, 0, -1
797	IF ( pt_vertical_gradient_level(i) > zu(k) .AND. &
798	pt_vertical_gradient_level(i) <= 0.0 ) THEN
799	gradient = pt_vertical_gradient(i) / 100.0
800	pt_vertical_gradient_level_ind(i) = k + 1
801	i = i + 1
802	IF ( i > 10 ) THEN
803	IF ( myid == 0 ) THEN
804	PRINT*, '+++ check_parameters: upper bound 10 of array', &
805	' "pt_vertical_gradient_level_ind" exceeded'
806	ENDIF
807	CALL local_stop
808	ENDIF
809	ENDIF
810	IF ( gradient /= 0.0 ) THEN
811	IF ( k /= nzt ) THEN
812	pt_init(k) = pt_init(k+1) - dzu(k+1) * gradient
813	ELSE
814	pt_init(k) = pt_surface - 0.5 * dzu(k+1) * gradient
815	pt_init(k+1) = pt_surface + 0.5 * dzu(k+1) * gradient
816	ENDIF
817	ELSE
818	pt_init(k) = pt_init(k+1)
819	ENDIF
820	ENDDO
821
822	ENDIF
823
824	!
825	!-- In case of no given temperature gradients, choose gradient of neutral
826	!-- stratification
827	IF ( pt_vertical_gradient_level(1) == -9999999.9 ) THEN
828	pt_vertical_gradient_level(1) = 0.0
829	ENDIF
830
831	!
832	!-- Store temperature gradient at the top boundary for possible Neumann
833	!-- boundary condition
834	bc_pt_t_val = ( pt_init(nzt+1) - pt_init(nzt) ) / dzu(nzt+1)
835
836	!
837	!-- If required, compute initial humidity or scalar profile using the given
838	!-- humidity/scalar gradient. In case of scalar transport, initially store
839	!-- values of the scalar parameters on humidity parameters
840	IF ( passive_scalar ) THEN
841	bc_q_b = bc_s_b
842	bc_q_t = bc_s_t
843	q_surface = s_surface
844	q_surface_initial_change = s_surface_initial_change
845	q_vertical_gradient = s_vertical_gradient
846	q_vertical_gradient_level = s_vertical_gradient_level
847	surface_waterflux = surface_scalarflux
848	ENDIF
849
850	IF ( humidity .OR. passive_scalar ) THEN
851
852	i = 1
853	gradient = 0.0
854	q_vertical_gradient_level_ind(1) = 0
855	DO k = 1, nzt+1
856	IF ( q_vertical_gradient_level(i) < zu(k) .AND. &
857	q_vertical_gradient_level(i) >= 0.0 ) THEN
858	gradient = q_vertical_gradient(i) / 100.0
859	q_vertical_gradient_level_ind(i) = k - 1
860	i = i + 1
861	IF ( i > 10 ) THEN
862	IF ( myid == 0 ) THEN
863	PRINT*, '+++ check_parameters: upper bound 10 of arr', &
864	'ay "q_vertical_gradient_level_ind" exceeded'
865	ENDIF
866	CALL local_stop
867	ENDIF
868	ENDIF
869	IF ( gradient /= 0.0 ) THEN
870	IF ( k /= 1 ) THEN
871	q_init(k) = q_init(k-1) + dzu(k) * gradient
872	ELSE
873	q_init(k) = q_init(k-1) + 0.5 * dzu(k) * gradient
874	ENDIF
875	ELSE
876	q_init(k) = q_init(k-1)
877	ENDIF
878	!
879	!-- Avoid negative humidities
880	IF ( q_init(k) < 0.0 ) THEN
881	q_init(k) = 0.0
882	ENDIF
883	ENDDO
884
885	!
886	!-- In case of no given humidity gradients, choose zero gradient
887	!-- conditions
888	IF ( q_vertical_gradient_level(1) == -1.0 ) THEN
889	q_vertical_gradient_level(1) = 0.0
890	ENDIF
891
892	!
893	!-- Store humidity gradient at the top boundary for possile Neumann
894	!-- boundary condition
895	bc_q_t_val = ( q_init(nzt+1) - q_init(nzt) ) / dzu(nzt+1)
896
897	ENDIF
898
899	!
900	!-- If required, compute initial salinity profile using the given salinity
901	!-- gradients
902	IF ( ocean ) THEN
903
904	i = 1
905	gradient = 0.0
906
907	sa_vertical_gradient_level_ind(1) = nzt+1
908	DO k = nzt, 0, -1
909	IF ( sa_vertical_gradient_level(i) > zu(k) .AND. &
910	sa_vertical_gradient_level(i) <= 0.0 ) THEN
911	gradient = sa_vertical_gradient(i) / 100.0
912	sa_vertical_gradient_level_ind(i) = k + 1
913	i = i + 1
914	IF ( i > 10 ) THEN
915	IF ( myid == 0 ) THEN
916	PRINT*, '+++ check_parameters: upper bound 10 of array', &
917	' "sa_vertical_gradient_level_ind" exceeded'
918	ENDIF
919	CALL local_stop
920	ENDIF
921	ENDIF
922	IF ( gradient /= 0.0 ) THEN
923	IF ( k /= nzt ) THEN
924	sa_init(k) = sa_init(k+1) - dzu(k+1) * gradient
925	ELSE
926	sa_init(k) = sa_surface - 0.5 * dzu(k+1) * gradient
927	sa_init(k+1) = sa_surface + 0.5 * dzu(k+1) * gradient
928	ENDIF
929	ELSE
930	sa_init(k) = sa_init(k+1)
931	ENDIF
932	ENDDO
933
934	ENDIF
935
936	ENDIF
937
938	!
939	!-- Compute Coriolis parameter
940	f = 2.0 * omega * SIN( phi / 180.0 * pi )
941	fs = 2.0 * omega * COS( phi / 180.0 * pi )
942
943	!
944	!-- Ocean runs always use reference values in the buoyancy term. Therefore
945	!-- set the reference temperature equal to the surface temperature.
946	IF ( ocean .AND. pt_reference == 9999999.9 ) pt_reference = pt_surface
947
948	!
949	!-- Reference value has to be used in buoyancy terms
950	IF ( pt_reference /= 9999999.9 ) use_reference = .TRUE.
951
952	!
953	!-- Sign of buoyancy/stability terms
954	IF ( ocean ) atmos_ocean_sign = -1.0
955
956	!
957	!-- Ocean version must use flux boundary conditions at the top
958	IF ( ocean .AND. .NOT. use_top_fluxes ) THEN
959	IF ( myid == 0 ) PRINT*, '+++ check_parameters: use_top_fluxes ',&
960	'must be .TRUE. in ocean version'
961	CALL local_stop
962	ENDIF
963
964	!
965	!-- In case of a given slope, compute the relevant quantities
966	IF ( alpha_surface /= 0.0 ) THEN
967	IF ( ABS( alpha_surface ) > 90.0 ) THEN
968	IF ( myid == 0 ) PRINT*, '+++ check_parameters: ABS( alpha_surface',&
969	'=', alpha_surface, ' ) must be < 90.0'
970	CALL local_stop
971	ENDIF
972	sloping_surface = .TRUE.
973	cos_alpha_surface = COS( alpha_surface / 180.0 * pi )
974	sin_alpha_surface = SIN( alpha_surface / 180.0 * pi )
975	ENDIF
976
977	!
978	!-- Check time step and cfl_factor
979	IF ( dt /= -1.0 ) THEN
980	IF ( dt <= 0.0 .AND. dt /= -1.0 ) THEN
981	IF ( myid == 0 ) PRINT*, '+++ check_parameters: dt=', dt, ' <= 0.0'
982	CALL local_stop
983	ENDIF
984	dt_3d = dt
985	dt_fixed = .TRUE.
986	ENDIF
987
988	IF ( cfl_factor <= 0.0 .OR. cfl_factor > 1.0 ) THEN
989	IF ( cfl_factor == -1.0 ) THEN
990	IF ( momentum_advec == 'ups-scheme' .OR. &
991	scalar_advec == 'ups-scheme' ) THEN
992	cfl_factor = 0.8
993	ELSE
994	IF ( timestep_scheme == 'runge-kutta-2' ) THEN
995	cfl_factor = 0.8
996	ELSEIF ( timestep_scheme == 'runge-kutta-3' ) THEN
997	cfl_factor = 0.9
998	ELSE
999	cfl_factor = 0.1
1000	ENDIF
1001	ENDIF
1002	ELSE
1003	IF ( myid == 0 ) THEN
1004	PRINT*, '+++ check_parameters: cfl_factor=', cfl_factor, &
1005	' out of range'
1006	PRINT*, '+++ 0.0 < cfl_factor <= 1.0 is required'
1007	ENDIF
1008	CALL local_stop
1009	ENDIF
1010	ENDIF
1011
1012	!
1013	!-- Store simulated time at begin
1014	simulated_time_at_begin = simulated_time
1015
1016	!
1017	!-- Set wind speed in the Galilei-transformed system
1018	IF ( galilei_transformation ) THEN
1019	IF ( use_ug_for_galilei_tr .AND. &
1020	ug_vertical_gradient_level(1) == 0.0 .AND. &
1021	vg_vertical_gradient_level(1) == 0.0 ) THEN
1022	u_gtrans = ug_surface
1023	v_gtrans = vg_surface
1024	ELSEIF ( use_ug_for_galilei_tr .AND. &
1025	ug_vertical_gradient_level(1) /= 0.0 ) THEN
1026	IF ( myid == 0 ) THEN
1027	PRINT*, '+++ check_parameters:'
1028	PRINT*, ' baroclinicity (ug) not allowed'
1029	PRINT*, ' simultaneously with galilei transformation'
1030	ENDIF
1031	CALL local_stop
1032	ELSEIF ( use_ug_for_galilei_tr .AND. &
1033	vg_vertical_gradient_level(1) /= 0.0 ) THEN
1034	IF ( myid == 0 ) THEN
1035	PRINT*, '+++ check_parameters:'
1036	PRINT*, ' baroclinicity (vg) not allowed'
1037	PRINT*, ' simultaneously with galilei transformation'
1038	ENDIF
1039	CALL local_stop
1040	ELSE
1041	IF ( myid == 0 ) THEN
1042	PRINT*, '+++ WARNING: check_parameters:'
1043	PRINT*, ' variable translation speed used for galilei-tran' // &
1044	'sformation, which'
1045	PRINT*, ' may cause instabilities in stably stratified regions'
1046	ENDIF
1047	ENDIF
1048	ENDIF
1049
1050	!
1051	!-- In case of using a prandtl-layer, calculated (or prescribed) surface
1052	!-- fluxes have to be used in the diffusion-terms
1053	IF ( prandtl_layer ) use_surface_fluxes = .TRUE.
1054
1055	!
1056	!-- Check boundary conditions and set internal variables:
1057	!-- Lateral boundary conditions
1058	IF ( bc_lr /= 'cyclic' .AND. bc_lr /= 'dirichlet/radiation' .AND. &
1059	bc_lr /= 'radiation/dirichlet' ) THEN
1060	IF ( myid == 0 ) THEN
1061	PRINT*, '+++ check_parameters:'
1062	PRINT*, ' unknown boundary condition: bc_lr = ', bc_lr
1063	ENDIF
1064	CALL local_stop
1065	ENDIF
1066	IF ( bc_ns /= 'cyclic' .AND. bc_ns /= 'dirichlet/radiation' .AND. &
1067	bc_ns /= 'radiation/dirichlet' ) THEN
1068	IF ( myid == 0 ) THEN
1069	PRINT*, '+++ check_parameters:'
1070	PRINT*, ' unknown boundary condition: bc_ns = ', bc_ns
1071	ENDIF
1072	CALL local_stop
1073	ENDIF
1074
1075	!
1076	!-- Non-cyclic lateral boundaries require the multigrid method and Piascek-
1077	!-- Willimas advection scheme. Several schemes and tools do not work with
1078	!-- non-cyclic boundary conditions.
1079	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
1080	IF ( psolver /= 'multigrid' ) THEN
1081	IF ( myid == 0 ) THEN
1082	PRINT*, '+++ check_parameters:'
1083	PRINT*, ' non-cyclic lateral boundaries do not allow', &
1084	' psolver = ', psolver
1085	ENDIF
1086	CALL local_stop
1087	ENDIF
1088	IF ( momentum_advec /= 'pw-scheme' ) THEN
1089	IF ( myid == 0 ) THEN
1090	PRINT*, '+++ check_parameters:'
1091	PRINT*, ' non-cyclic lateral boundaries do not allow', &
1092	' momentum_advec = ', momentum_advec
1093	ENDIF
1094	CALL local_stop
1095	ENDIF
1096	IF ( scalar_advec /= 'pw-scheme' ) THEN
1097	IF ( myid == 0 ) THEN
1098	PRINT*, '+++ check_parameters:'
1099	PRINT*, ' non-cyclic lateral boundaries do not allow', &
1100	' scalar_advec = ', scalar_advec
1101	ENDIF
1102	CALL local_stop
1103	ENDIF
1104	IF ( galilei_transformation ) THEN
1105	IF ( myid == 0 ) THEN
1106	PRINT*, '+++ check_parameters:'
1107	PRINT*, ' non-cyclic lateral boundaries do not allow', &
1108	' galilei_transformation = .T.'
1109	ENDIF
1110	CALL local_stop
1111	ENDIF
1112	! IF ( conserve_volume_flow ) THEN
1113	! IF ( myid == 0 ) THEN
1114	! PRINT*, '+++ check_parameters:'
1115	! PRINT*, ' non-cyclic lateral boundaries do not allow', &
1116	! ' conserve_volume_flow = .T.'
1117	! ENDIF
1118	! CALL local_stop
1119	! ENDIF
1120	ENDIF
1121
1122	!
1123	!-- Bottom boundary condition for the turbulent Kinetic energy
1124	IF ( bc_e_b == 'neumann' ) THEN
1125	ibc_e_b = 1
1126	IF ( adjust_mixing_length .AND. prandtl_layer ) THEN
1127	IF ( myid == 0 ) THEN
1128	PRINT*, '+++ WARNING: check_parameters:'
1129	PRINT*, ' adjust_mixing_length = TRUE and bc_e_b = ', bc_e_b
1130	ENDIF
1131	ENDIF
1132	ELSEIF ( bc_e_b == '(u)*2+neumann' ) THEN
1133	ibc_e_b = 2
1134	IF ( .NOT. adjust_mixing_length .AND. prandtl_layer ) THEN
1135	IF ( myid == 0 ) THEN
1136	PRINT*, '+++ WARNING: check_parameters:'
1137	PRINT*, ' adjust_mixing_length = FALSE and bc_e_b = ', bc_e_b
1138	ENDIF
1139	ENDIF
1140	IF ( .NOT. prandtl_layer ) THEN
1141	bc_e_b = 'neumann'
1142	ibc_e_b = 1
1143	IF ( myid == 0 ) THEN
1144	PRINT*, '+++ WARNING: check_parameters:'
1145	PRINT*, ' boundary condition bc_e_b changed to "', bc_e_b, '"'
1146	ENDIF
1147	ENDIF
1148	ELSE
1149	IF ( myid == 0 ) THEN
1150	PRINT*, '+++ check_parameters:'
1151	PRINT*, ' unknown boundary condition: bc_e_b = ', bc_e_b
1152	ENDIF
1153	CALL local_stop
1154	ENDIF
1155
1156	!
1157	!-- Boundary conditions for perturbation pressure
1158	IF ( bc_p_b == 'dirichlet' ) THEN
1159	ibc_p_b = 0
1160	ELSEIF ( bc_p_b == 'neumann' ) THEN
1161	ibc_p_b = 1
1162	ELSEIF ( bc_p_b == 'neumann+inhomo' ) THEN
1163	ibc_p_b = 2
1164	ELSE
1165	IF ( myid == 0 ) THEN
1166	PRINT*, '+++ check_parameters:'
1167	PRINT*, ' unknown boundary condition: bc_p_b = ', bc_p_b
1168	ENDIF
1169	CALL local_stop
1170	ENDIF
1171	IF ( ibc_p_b == 2 .AND. .NOT. prandtl_layer ) THEN
1172	IF ( myid == 0 ) THEN
1173	PRINT*, '+++ check_parameters:'
1174	PRINT*, ' boundary condition: bc_p_b = ', TRIM( bc_p_b ), &
1175	' not allowed with'
1176	PRINT*, ' prandtl_layer = .FALSE.'
1177	ENDIF
1178	CALL local_stop
1179	ENDIF
1180	IF ( bc_p_t == 'dirichlet' ) THEN
1181	ibc_p_t = 0
1182	ELSEIF ( bc_p_t == 'neumann' ) THEN
1183	ibc_p_t = 1
1184	ELSE
1185	IF ( myid == 0 ) THEN
1186	PRINT*, '+++ check_parameters:'
1187	PRINT*, ' unknown boundary condition: bc_p_t = ', bc_p_t
1188	ENDIF
1189	CALL local_stop
1190	ENDIF
1191
1192	!
1193	!-- Boundary conditions for potential temperature
1194	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
1195	ibc_pt_b = 2
1196	ELSE
1197	IF ( bc_pt_b == 'dirichlet' ) THEN
1198	ibc_pt_b = 0
1199	ELSEIF ( bc_pt_b == 'neumann' ) THEN
1200	ibc_pt_b = 1
1201	ELSE
1202	IF ( myid == 0 ) THEN
1203	PRINT*, '+++ check_parameters:'
1204	PRINT*, ' unknown boundary condition: bc_pt_b = ', bc_pt_b
1205	ENDIF
1206	CALL local_stop
1207	ENDIF
1208	ENDIF
1209
1210	IF ( bc_pt_t == 'dirichlet' ) THEN
1211	ibc_pt_t = 0
1212	ELSEIF ( bc_pt_t == 'neumann' ) THEN
1213	ibc_pt_t = 1
1214	ELSEIF ( bc_pt_t == 'initial_gradient' ) THEN
1215	ibc_pt_t = 2
1216	ELSE
1217	IF ( myid == 0 ) THEN
1218	PRINT*, '+++ check_parameters:'
1219	PRINT*, ' unknown boundary condition: bc_pt_t = ', bc_pt_t
1220	ENDIF
1221	CALL local_stop
1222	ENDIF
1223
1224	IF ( surface_heatflux == 9999999.9 ) constant_heatflux = .FALSE.
1225	IF ( top_heatflux == 9999999.9 ) constant_top_heatflux = .FALSE.
1226	IF ( top_momentumflux_u /= 9999999.9 .AND. &
1227	top_momentumflux_v /= 9999999.9 ) THEN
1228	constant_top_momentumflux = .TRUE.
1229	ELSEIF ( .NOT. ( top_momentumflux_u == 9999999.9 .AND. &
1230	top_momentumflux_v == 9999999.9 ) ) THEN
1231	IF ( myid == 0 ) THEN
1232	PRINT*, '+++ check_parameters:'
1233	PRINT*, ' both, top_momentumflux_u AND top_momentumflux_v'
1234	PRINT*, ' must be set'
1235	ENDIF
1236	CALL local_stop
1237	ENDIF
1238
1239	!
1240	!-- A given surface temperature implies Dirichlet boundary condition for
1241	!-- temperature. In this case specification of a constant heat flux is
1242	!-- forbidden.
1243	IF ( ibc_pt_b == 0 .AND. constant_heatflux .AND. &
1244	surface_heatflux /= 0.0 ) THEN
1245	IF ( myid == 0 ) THEN
1246	PRINT*, '+++ check_parameters:'
1247	PRINT*, ' boundary_condition: bc_pt_b = ', bc_pt_b
1248	PRINT*, ' is not allowed with constant_heatflux = .TRUE.'
1249	ENDIF
1250	CALL local_stop
1251	ENDIF
1252	IF ( constant_heatflux .AND. pt_surface_initial_change /= 0.0 ) THEN
1253	IF ( myid == 0 ) THEN
1254	PRINT*, '+++ check_parameters: constant_heatflux = .TRUE. is not'
1255	PRINT*, ' allowed with pt_surface_initial_change (/=0) = ', &
1256	pt_surface_initial_change
1257	ENDIF
1258	CALL local_stop
1259	ENDIF
1260
1261	!
1262	!-- A given temperature at the top implies Dirichlet boundary condition for
1263	!-- temperature. In this case specification of a constant heat flux is
1264	!-- forbidden.
1265	IF ( ibc_pt_t == 0 .AND. constant_top_heatflux .AND. &
1266	top_heatflux /= 0.0 ) THEN
1267	IF ( myid == 0 ) THEN
1268	PRINT*, '+++ check_parameters:'
1269	PRINT*, ' boundary_condition: bc_pt_t = ', bc_pt_t
1270	PRINT*, ' is not allowed with constant_top_heatflux = .TRUE.'
1271	ENDIF
1272	CALL local_stop
1273	ENDIF
1274
1275	!
1276	!-- Boundary conditions for salinity
1277	IF ( ocean ) THEN
1278	IF ( bc_sa_t == 'dirichlet' ) THEN
1279	ibc_sa_t = 0
1280	ELSEIF ( bc_sa_t == 'neumann' ) THEN
1281	ibc_sa_t = 1
1282	ELSE
1283	IF ( myid == 0 ) THEN
1284	PRINT*, '+++ check_parameters:'
1285	PRINT*, ' unknown boundary condition: bc_sa_t = ', bc_sa_t
1286	ENDIF
1287	CALL local_stop
1288	ENDIF
1289
1290	IF ( top_salinityflux == 9999999.9 ) constant_top_salinityflux = .FALSE.
1291	IF ( ibc_sa_t == 1 .AND. top_salinityflux == 9999999.9 ) THEN
1292	IF ( myid == 0 ) THEN
1293	PRINT*, '+++ check_parameters:'
1294	PRINT*, ' boundary_condition: bc_sa_t = ', bc_sa_t
1295	PRINT*, ' requires to set top_salinityflux '
1296	ENDIF
1297	CALL local_stop
1298	ENDIF
1299
1300	!
1301	!-- A fixed salinity at the top implies Dirichlet boundary condition for
1302	!-- salinity. In this case specification of a constant salinity flux is
1303	!-- forbidden.
1304	IF ( ibc_sa_t == 0 .AND. constant_top_salinityflux .AND. &
1305	top_salinityflux /= 0.0 ) THEN
1306	IF ( myid == 0 ) THEN
1307	PRINT*, '+++ check_parameters:'
1308	PRINT*, ' boundary_condition: bc_sa_t = ', bc_sa_t
1309	PRINT*, ' is not allowed with constant_top_salinityflux = ', &
1310	'.TRUE.'
1311	ENDIF
1312	CALL local_stop
1313	ENDIF
1314
1315	ENDIF
1316
1317	!
1318	!-- In case of humidity or passive scalar, set boundary conditions for total
1319	!-- water content / scalar
1320	IF ( humidity .OR. passive_scalar ) THEN
1321	IF ( humidity ) THEN
1322	sq = 'q'
1323	ELSE
1324	sq = 's'
1325	ENDIF
1326	IF ( bc_q_b == 'dirichlet' ) THEN
1327	ibc_q_b = 0
1328	ELSEIF ( bc_q_b == 'neumann' ) THEN
1329	ibc_q_b = 1
1330	ELSE
1331	IF ( myid == 0 ) THEN
1332	PRINT*, '+++ check_parameters:'
1333	PRINT*, ' unknown boundary condition: bc_', sq, '_b = ', bc_q_b
1334	ENDIF
1335	CALL local_stop
1336	ENDIF
1337	IF ( bc_q_t == 'dirichlet' ) THEN
1338	ibc_q_t = 0
1339	ELSEIF ( bc_q_t == 'neumann' ) THEN
1340	ibc_q_t = 1
1341	ELSE
1342	IF ( myid == 0 ) THEN
1343	PRINT*, '+++ check_parameters:'
1344	PRINT*, ' unknown boundary condition: bc_', sq, '_t = ', bc_q_t
1345	ENDIF
1346	CALL local_stop
1347	ENDIF
1348
1349	IF ( surface_waterflux == 0.0 ) constant_waterflux = .FALSE.
1350
1351	!
1352	!-- A given surface humidity implies Dirichlet boundary condition for
1353	!-- humidity. In this case specification of a constant water flux is
1354	!-- forbidden.
1355	IF ( ibc_q_b == 0 .AND. constant_waterflux ) THEN
1356	IF ( myid == 0 ) THEN
1357	PRINT*, '+++ check_parameters:'
1358	PRINT*, ' boundary_condition: bc_', sq, '_b = ', bc_q_b
1359	PRINT*, ' is not allowed with prescribed surface flux'
1360	ENDIF
1361	CALL local_stop
1362	ENDIF
1363	IF ( constant_waterflux .AND. q_surface_initial_change /= 0.0 ) THEN
1364	IF ( myid == 0 ) THEN
1365	PRINT*, '+++ check_parameters: a prescribed surface flux is not'
1366	PRINT*, ' allowed with ', sq, '_surface_initial_change (/=0)', &
1367	' = ', q_surface_initial_change
1368	ENDIF
1369	CALL local_stop
1370	ENDIF
1371
1372	ENDIF
1373
1374	!
1375	!-- Boundary conditions for horizontal components of wind speed
1376	IF ( bc_uv_b == 'dirichlet' ) THEN
1377	ibc_uv_b = 0
1378	ELSEIF ( bc_uv_b == 'neumann' ) THEN
1379	ibc_uv_b = 1
1380	IF ( prandtl_layer ) THEN
1381	IF ( myid == 0 ) THEN
1382	PRINT*, '+++ check_parameters:'
1383	PRINT*, ' boundary condition: bc_uv_b = ', TRIM( bc_uv_b ), &
1384	' is not allowed with'
1385	PRINT*, ' prandtl_layer = .TRUE.'
1386	ENDIF
1387	CALL local_stop
1388	ENDIF
1389	ELSE
1390	IF ( myid == 0 ) THEN
1391	PRINT*, '+++ check_parameters:'
1392	PRINT*, ' unknown boundary condition: bc_uv_b = ', bc_uv_b
1393	ENDIF
1394	CALL local_stop
1395	ENDIF
1396	IF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
1397	bc_uv_t = 'neumann'
1398	ibc_uv_t = 1
1399	ELSE
1400	IF ( bc_uv_t == 'dirichlet' .OR. bc_uv_t == 'dirichlet_0' ) THEN
1401	ibc_uv_t = 0
1402	ELSEIF ( bc_uv_t == 'neumann' ) THEN
1403	ibc_uv_t = 1
1404	ELSE
1405	IF ( myid == 0 ) THEN
1406	PRINT*, '+++ check_parameters:'
1407	PRINT*, ' unknown boundary condition: bc_uv_t = ', bc_uv_t
1408	ENDIF
1409	CALL local_stop
1410	ENDIF
1411	ENDIF
1412
1413	!
1414	!-- Compute and check, respectively, the Rayleigh Damping parameter
1415	IF ( rayleigh_damping_factor == -1.0 ) THEN
1416	IF ( momentum_advec == 'ups-scheme' ) THEN
1417	rayleigh_damping_factor = 0.01
1418	ELSE
1419	rayleigh_damping_factor = 0.0
1420	ENDIF
1421	ELSE
1422	IF ( rayleigh_damping_factor < 0.0 .OR. rayleigh_damping_factor > 1.0 ) &
1423	THEN
1424	IF ( myid == 0 ) THEN
1425	PRINT*, '+++ check_parameters:'
1426	PRINT*, ' rayleigh_damping_factor = ', rayleigh_damping_factor,&
1427	' out of range [0.0,1.0]'
1428	ENDIF
1429	CALL local_stop
1430	ENDIF
1431	ENDIF
1432
1433	IF ( rayleigh_damping_height == -1.0 ) THEN
1434	IF ( .NOT. ocean ) THEN
1435	rayleigh_damping_height = 0.66666666666 * zu(nzt)
1436	ELSE
1437	rayleigh_damping_height = 0.66666666666 * zu(nzb)
1438	ENDIF
1439	ELSE
1440	IF ( .NOT. ocean ) THEN
1441	IF ( rayleigh_damping_height < 0.0 .OR. &
1442	rayleigh_damping_height > zu(nzt) ) THEN
1443	IF ( myid == 0 ) THEN
1444	PRINT*, '+++ check_parameters:'
1445	PRINT*, ' rayleigh_damping_height = ', rayleigh_damping_height,&
1446	' out of range [0.0,', zu(nzt), ']'
1447	ENDIF
1448	CALL local_stop
1449	ENDIF
1450	ELSE
1451	IF ( rayleigh_damping_height > 0.0 .OR. &
1452	rayleigh_damping_height < zu(nzb) ) THEN
1453	IF ( myid == 0 ) THEN
1454	PRINT*, '+++ check_parameters:'
1455	PRINT*, ' rayleigh_damping_height = ', rayleigh_damping_height,&
1456	' out of range [0.0,', zu(nzb), ']'
1457	ENDIF
1458	CALL local_stop
1459	ENDIF
1460	ENDIF
1461	ENDIF
1462
1463	!
1464	!-- Check limiters for Upstream-Spline scheme
1465	IF ( overshoot_limit_u < 0.0 .OR. overshoot_limit_v < 0.0 .OR. &
1466	overshoot_limit_w < 0.0 .OR. overshoot_limit_pt < 0.0 .OR. &
1467	overshoot_limit_e < 0.0 ) THEN
1468	IF ( myid == 0 ) THEN
1469	PRINT*, '+++ check_parameters:'
1470	PRINT*, ' overshoot_limit_... < 0.0 is not allowed'
1471	ENDIF
1472	CALL local_stop
1473	ENDIF
1474	IF ( ups_limit_u < 0.0 .OR. ups_limit_v < 0.0 .OR. ups_limit_w < 0.0 .OR. &
1475	ups_limit_pt < 0.0 .OR. ups_limit_e < 0.0 ) THEN
1476	IF ( myid == 0 ) THEN
1477	PRINT*, '+++ check_parameters:'
1478	PRINT*, ' ups_limit_... < 0.0 is not allowed'
1479	ENDIF
1480	CALL local_stop
1481	ENDIF
1482
1483	!
1484	!-- Check number of chosen statistic regions. More than 10 regions are not
1485	!-- allowed, because so far no more than 10 corresponding output files can
1486	!-- be opened (cf. check_open)
1487	IF ( statistic_regions > 9 .OR. statistic_regions < 0 ) THEN
1488	IF ( myid == 0 ) THEN
1489	PRINT*, '+++ check_parameters: Number of statistic_regions = ', &
1490	statistic_regions+1
1491	PRINT*, ' Only 10 regions are allowed'
1492	ENDIF
1493	CALL local_stop
1494	ENDIF
1495	IF ( normalizing_region > statistic_regions .OR. &
1496	normalizing_region < 0) THEN
1497	IF ( myid == 0 ) THEN
1498	PRINT*, '+++ check_parameters: normalizing_region = ', &
1499	normalizing_region, ' is unknown'
1500	PRINT*, ' Must be <= ', statistic_regions
1501	ENDIF
1502	CALL local_stop
1503	ENDIF
1504
1505	!
1506	!-- Check the interval for sorting particles.
1507	!-- Using particles as cloud droplets requires sorting after each timestep.
1508	IF ( dt_sort_particles /= 0.0 .AND. cloud_droplets ) THEN
1509	dt_sort_particles = 0.0
1510	IF ( myid == 0 ) THEN
1511	PRINT*, '+++ WARNING: check_parameters:'
1512	PRINT*, ' dt_sort_particles is reset to 0.0 because ', &
1513	'of cloud_droplets = .TRUE.'
1514	ENDIF
1515	ENDIF
1516
1517	!
1518	!-- Set the default intervals for data output, if necessary
1519	!-- NOTE: dt_dosp has already been set in package_parin
1520	IF ( dt_data_output /= 9999999.9 ) THEN
1521	IF ( dt_dopr == 9999999.9 ) dt_dopr = dt_data_output
1522	IF ( dt_dopts == 9999999.9 ) dt_dopts = dt_data_output
1523	IF ( dt_do2d_xy == 9999999.9 ) dt_do2d_xy = dt_data_output
1524	IF ( dt_do2d_xz == 9999999.9 ) dt_do2d_xz = dt_data_output
1525	IF ( dt_do2d_yz == 9999999.9 ) dt_do2d_yz = dt_data_output
1526	IF ( dt_do3d == 9999999.9 ) dt_do3d = dt_data_output
1527	IF ( dt_data_output_av == 9999999.9 ) dt_data_output_av = dt_data_output
1528	ENDIF
1529
1530	!
1531	!-- Set the default skip time intervals for data output, if necessary
1532	IF ( skip_time_dopr == 9999999.9 ) &
1533	skip_time_dopr = skip_time_data_output
1534	IF ( skip_time_dosp == 9999999.9 ) &
1535	skip_time_dosp = skip_time_data_output
1536	IF ( skip_time_do2d_xy == 9999999.9 ) &
1537	skip_time_do2d_xy = skip_time_data_output
1538	IF ( skip_time_do2d_xz == 9999999.9 ) &
1539	skip_time_do2d_xz = skip_time_data_output
1540	IF ( skip_time_do2d_yz == 9999999.9 ) &
1541	skip_time_do2d_yz = skip_time_data_output
1542	IF ( skip_time_do3d == 9999999.9 ) &
1543	skip_time_do3d = skip_time_data_output
1544	IF ( skip_time_data_output_av == 9999999.9 ) &
1545	skip_time_data_output_av = skip_time_data_output
1546
1547	!
1548	!-- Check the average intervals (first for 3d-data, then for profiles and
1549	!-- spectra)
1550	IF ( averaging_interval > dt_data_output_av ) THEN
1551	IF ( myid == 0 ) THEN
1552	PRINT*, '+++ check_parameters: average_interval=', &
1553	averaging_interval, ' must be <= dt_data_output=', &
1554	dt_data_output
1555	ENDIF
1556	CALL local_stop
1557	ENDIF
1558
1559	IF ( averaging_interval_pr == 9999999.9 ) THEN
1560	averaging_interval_pr = averaging_interval
1561	ENDIF
1562
1563	IF ( averaging_interval_pr > dt_dopr ) THEN
1564	IF ( myid == 0 ) THEN
1565	PRINT*, '+++ check_parameters: averaging_interval_pr=', &
1566	averaging_interval_pr, ' must be <= dt_dopr=', dt_dopr
1567	ENDIF
1568	CALL local_stop
1569	ENDIF
1570
1571	IF ( averaging_interval_sp == 9999999.9 ) THEN
1572	averaging_interval_sp = averaging_interval
1573	ENDIF
1574
1575	IF ( averaging_interval_sp > dt_dosp ) THEN
1576	IF ( myid == 0 ) THEN
1577	PRINT*, '+++ check_parameters: averaging_interval_sp=', &
1578	averaging_interval_sp, ' must be <= dt_dosp=', dt_dosp
1579	ENDIF
1580	CALL local_stop
1581	ENDIF
1582
1583	!
1584	!-- Set the default interval for profiles entering the temporal average
1585	IF ( dt_averaging_input_pr == 9999999.9 ) THEN
1586	dt_averaging_input_pr = dt_averaging_input
1587	ENDIF
1588
1589	!
1590	!-- Set the default interval for the output of timeseries to a reasonable
1591	!-- value (tries to minimize the number of calls of flow_statistics)
1592	IF ( dt_dots == 9999999.9 ) THEN
1593	IF ( averaging_interval_pr == 0.0 ) THEN
1594	dt_dots = MIN( dt_run_control, dt_dopr )
1595	ELSE
1596	dt_dots = MIN( dt_run_control, dt_averaging_input_pr )
1597	ENDIF
1598	ENDIF
1599
1600	!
1601	!-- Check the sample rate for averaging (first for 3d-data, then for profiles)
1602	IF ( dt_averaging_input > averaging_interval ) THEN
1603	IF ( myid == 0 ) THEN
1604	PRINT*, '+++ check_parameters: dt_averaging_input=', &
1605	dt_averaging_input, ' must be <= averaging_interval=', &
1606	averaging_interval
1607	ENDIF
1608	CALL local_stop
1609	ENDIF
1610
1611	IF ( dt_averaging_input_pr > averaging_interval_pr ) THEN
1612	IF ( myid == 0 ) THEN
1613	PRINT*, '+++ check_parameters: dt_averaging_input_pr=', &
1614	dt_averaging_input_pr, &
1615	' must be <= averaging_interval_pr=', &
1616	averaging_interval_pr
1617	ENDIF
1618	CALL local_stop
1619	ENDIF
1620
1621	!
1622	!-- Set the default value for the integration interval of precipitation amount
1623	IF ( precipitation ) THEN
1624	IF ( precipitation_amount_interval == 9999999.9 ) THEN
1625	precipitation_amount_interval = dt_do2d_xy
1626	ELSE
1627	IF ( precipitation_amount_interval > dt_do2d_xy ) THEN
1628	IF ( myid == 0 ) PRINT*, '+++ check_parameters: ', &
1629	'precipitation_amount_interval =', &
1630	precipitation_amount_interval, &
1631	' must not be larger than dt_do2d_xy', &
1632	' = ', dt_do2d_xy
1633	CALL local_stop
1634	ENDIF
1635	ENDIF
1636	ENDIF
1637
1638	!
1639	!-- Determine the number of output profiles and check whether they are
1640	!-- permissible
1641	DO WHILE ( data_output_pr(dopr_n+1) /= ' ' )
1642
1643	dopr_n = dopr_n + 1
1644	i = dopr_n
1645
1646	!
1647	!-- Determine internal profile number (for hom, homs)
1648	!-- and store height levels
1649	SELECT CASE ( TRIM( data_output_pr(i) ) )
1650
1651	CASE ( 'u', '#u' )
1652	dopr_index(i) = 1
1653	dopr_unit(i) = 'm/s'
1654	hom(:,2,1,:) = SPREAD( zu, 2, statistic_regions+1 )
1655	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1656	dopr_initial_index(i) = 5
1657	hom(:,2,5,:) = SPREAD( zu, 2, statistic_regions+1 )
1658	data_output_pr(i) = data_output_pr(i)(2:)
1659	ENDIF
1660
1661	CASE ( 'v', '#v' )
1662	dopr_index(i) = 2
1663	dopr_unit(i) = 'm/s'
1664	hom(:,2,2,:) = SPREAD( zu, 2, statistic_regions+1 )
1665	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1666	dopr_initial_index(i) = 6
1667	hom(:,2,6,:) = SPREAD( zu, 2, statistic_regions+1 )
1668	data_output_pr(i) = data_output_pr(i)(2:)
1669	ENDIF
1670
1671	CASE ( 'w' )
1672	dopr_index(i) = 3
1673	dopr_unit(i) = 'm/s'
1674	hom(:,2,3,:) = SPREAD( zw, 2, statistic_regions+1 )
1675
1676	CASE ( 'pt', '#pt' )
1677	IF ( .NOT. cloud_physics ) THEN
1678	dopr_index(i) = 4
1679	dopr_unit(i) = 'K'
1680	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
1681	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1682	dopr_initial_index(i) = 7
1683	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
1684	hom(nzb,2,7,:) = 0.0 ! because zu(nzb) is negative
1685	data_output_pr(i) = data_output_pr(i)(2:)
1686	ENDIF
1687	ELSE
1688	dopr_index(i) = 43
1689	dopr_unit(i) = 'K'
1690	hom(:,2,43,:) = SPREAD( zu, 2, statistic_regions+1 )
1691	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1692	dopr_initial_index(i) = 28
1693	hom(:,2,28,:) = SPREAD( zu, 2, statistic_regions+1 )
1694	hom(nzb,2,28,:) = 0.0 ! because zu(nzb) is negative
1695	data_output_pr(i) = data_output_pr(i)(2:)
1696	ENDIF
1697	ENDIF
1698
1699	CASE ( 'e' )
1700	dopr_index(i) = 8
1701	dopr_unit(i) = 'm2/s2'
1702	hom(:,2,8,:) = SPREAD( zu, 2, statistic_regions+1 )
1703	hom(nzb,2,8,:) = 0.0
1704
1705	CASE ( 'km', '#km' )
1706	dopr_index(i) = 9
1707	dopr_unit(i) = 'm2/s'
1708	hom(:,2,9,:) = SPREAD( zu, 2, statistic_regions+1 )
1709	hom(nzb,2,9,:) = 0.0
1710	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1711	dopr_initial_index(i) = 23
1712	hom(:,2,23,:) = hom(:,2,9,:)
1713	data_output_pr(i) = data_output_pr(i)(2:)
1714	ENDIF
1715
1716	CASE ( 'kh', '#kh' )
1717	dopr_index(i) = 10
1718	dopr_unit(i) = 'm2/s'
1719	hom(:,2,10,:) = SPREAD( zu, 2, statistic_regions+1 )
1720	hom(nzb,2,10,:) = 0.0
1721	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1722	dopr_initial_index(i) = 24
1723	hom(:,2,24,:) = hom(:,2,10,:)
1724	data_output_pr(i) = data_output_pr(i)(2:)
1725	ENDIF
1726
1727	CASE ( 'l', '#l' )
1728	dopr_index(i) = 11
1729	dopr_unit(i) = 'm'
1730	hom(:,2,11,:) = SPREAD( zu, 2, statistic_regions+1 )
1731	hom(nzb,2,11,:) = 0.0
1732	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1733	dopr_initial_index(i) = 25
1734	hom(:,2,25,:) = hom(:,2,11,:)
1735	data_output_pr(i) = data_output_pr(i)(2:)
1736	ENDIF
1737
1738	CASE ( 'w"u"' )
1739	dopr_index(i) = 12
1740	dopr_unit(i) = 'm2/s2'
1741	hom(:,2,12,:) = SPREAD( zw, 2, statistic_regions+1 )
1742	IF ( prandtl_layer ) hom(nzb,2,12,:) = zu(1)
1743
1744	CASE ( 'wu' )
1745	dopr_index(i) = 13
1746	dopr_unit(i) = 'm2/s2'
1747	hom(:,2,13,:) = SPREAD( zw, 2, statistic_regions+1 )
1748
1749	CASE ( 'w"v"' )
1750	dopr_index(i) = 14
1751	dopr_unit(i) = 'm2/s2'
1752	hom(:,2,14,:) = SPREAD( zw, 2, statistic_regions+1 )
1753	IF ( prandtl_layer ) hom(nzb,2,14,:) = zu(1)
1754
1755	CASE ( 'wv' )
1756	dopr_index(i) = 15
1757	dopr_unit(i) = 'm2/s2'
1758	hom(:,2,15,:) = SPREAD( zw, 2, statistic_regions+1 )
1759
1760	CASE ( 'w"pt"' )
1761	dopr_index(i) = 16
1762	dopr_unit(i) = 'K m/s'
1763	hom(:,2,16,:) = SPREAD( zw, 2, statistic_regions+1 )
1764
1765	CASE ( 'wpt' )
1766	dopr_index(i) = 17
1767	dopr_unit(i) = 'K m/s'
1768	hom(:,2,17,:) = SPREAD( zw, 2, statistic_regions+1 )
1769
1770	CASE ( 'wpt' )
1771	dopr_index(i) = 18
1772	dopr_unit(i) = 'K m/s'
1773	hom(:,2,18,:) = SPREAD( zw, 2, statistic_regions+1 )
1774
1775	CASE ( 'wu' )
1776	dopr_index(i) = 19
1777	dopr_unit(i) = 'm2/s2'
1778	hom(:,2,19,:) = SPREAD( zw, 2, statistic_regions+1 )
1779	IF ( prandtl_layer ) hom(nzb,2,19,:) = zu(1)
1780
1781	CASE ( 'wv' )
1782	dopr_index(i) = 20
1783	dopr_unit(i) = 'm2/s2'
1784	hom(:,2,20,:) = SPREAD( zw, 2, statistic_regions+1 )
1785	IF ( prandtl_layer ) hom(nzb,2,20,:) = zu(1)
1786
1787	CASE ( 'wptBC' )
1788	dopr_index(i) = 21
1789	dopr_unit(i) = 'K m/s'
1790	hom(:,2,21,:) = SPREAD( zw, 2, statistic_regions+1 )
1791
1792	CASE ( 'wptBC' )
1793	dopr_index(i) = 22
1794	dopr_unit(i) = 'K m/s'
1795	hom(:,2,22,:) = SPREAD( zw, 2, statistic_regions+1 )
1796
1797	CASE ( 'sa', '#sa' )
1798	IF ( .NOT. ocean ) THEN
1799	IF ( myid == 0 ) THEN
1800	PRINT*, '+++ check_parameters: data_output_pr = ', &
1801	data_output_pr(i), &
1802	' is not implemented for ocean = FALSE'
1803	ENDIF
1804	CALL local_stop
1805	ELSE
1806	dopr_index(i) = 23
1807	dopr_unit(i) = 'psu'
1808	hom(:,2,23,:) = SPREAD( zu, 2, statistic_regions+1 )
1809	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1810	dopr_initial_index(i) = 26
1811	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1812	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1813	data_output_pr(i) = data_output_pr(i)(2:)
1814	ENDIF
1815	ENDIF
1816
1817	CASE ( 'u*2' )
1818	dopr_index(i) = 30
1819	dopr_unit(i) = 'm2/s2'
1820	hom(:,2,30,:) = SPREAD( zu, 2, statistic_regions+1 )
1821
1822	CASE ( 'v*2' )
1823	dopr_index(i) = 31
1824	dopr_unit(i) = 'm2/s2'
1825	hom(:,2,31,:) = SPREAD( zu, 2, statistic_regions+1 )
1826
1827	CASE ( 'w*2' )
1828	dopr_index(i) = 32
1829	dopr_unit(i) = 'm2/s2'
1830	hom(:,2,32,:) = SPREAD( zw, 2, statistic_regions+1 )
1831
1832	CASE ( 'pt*2' )
1833	dopr_index(i) = 33
1834	dopr_unit(i) = 'K2'
1835	hom(:,2,33,:) = SPREAD( zu, 2, statistic_regions+1 )
1836
1837	CASE ( 'e*' )
1838	dopr_index(i) = 34
1839	dopr_unit(i) = 'm2/s2'
1840	hom(:,2,34,:) = SPREAD( zu, 2, statistic_regions+1 )
1841
1842	CASE ( 'w2pt' )
1843	dopr_index(i) = 35
1844	dopr_unit(i) = 'K m2/s2'
1845	hom(:,2,35,:) = SPREAD( zw, 2, statistic_regions+1 )
1846
1847	CASE ( 'wpt2' )
1848	dopr_index(i) = 36
1849	dopr_unit(i) = 'K2 m/s'
1850	hom(:,2,36,:) = SPREAD( zw, 2, statistic_regions+1 )
1851
1852	CASE ( 'we' )
1853	dopr_index(i) = 37
1854	dopr_unit(i) = 'm3/s3'
1855	hom(:,2,37,:) = SPREAD( zw, 2, statistic_regions+1 )
1856
1857	CASE ( 'w*3' )
1858	dopr_index(i) = 38
1859	dopr_unit(i) = 'm3/s3'
1860	hom(:,2,38,:) = SPREAD( zw, 2, statistic_regions+1 )
1861
1862	CASE ( 'Sw' )
1863	dopr_index(i) = 39
1864	dopr_unit(i) = 'none'
1865	hom(:,2,39,:) = SPREAD( zw, 2, statistic_regions+1 )
1866
1867	CASE ( 'q', '#q' )
1868	IF ( .NOT. humidity ) THEN
1869	IF ( myid == 0 ) THEN
1870	PRINT*, '+++ check_parameters: data_output_pr = ', &
1871	data_output_pr(i), &
1872	' is not implemented for humidity = FALSE'
1873	ENDIF
1874	CALL local_stop
1875	ELSE
1876	dopr_index(i) = 41
1877	dopr_unit(i) = 'kg/kg'
1878	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
1879	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1880	dopr_initial_index(i) = 26
1881	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1882	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1883	data_output_pr(i) = data_output_pr(i)(2:)
1884	ENDIF
1885	ENDIF
1886
1887	CASE ( 's', '#s' )
1888	IF ( .NOT. passive_scalar ) THEN
1889	IF ( myid == 0 ) THEN
1890	PRINT*, '+++ check_parameters: data_output_pr = ', &
1891	data_output_pr(i), &
1892	' is not implemented for passive_scalar = FALSE'
1893	ENDIF
1894	CALL local_stop
1895	ELSE
1896	dopr_index(i) = 41
1897	dopr_unit(i) = 'kg/m3'
1898	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
1899	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1900	dopr_initial_index(i) = 26
1901	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1902	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1903	data_output_pr(i) = data_output_pr(i)(2:)
1904	ENDIF
1905	ENDIF
1906
1907	CASE ( 'qv', '#qv' )
1908	IF ( .NOT. cloud_physics ) THEN
1909	dopr_index(i) = 41
1910	dopr_unit(i) = 'kg/kg'
1911	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
1912	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1913	dopr_initial_index(i) = 26
1914	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1915	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1916	data_output_pr(i) = data_output_pr(i)(2:)
1917	ENDIF
1918	ELSE
1919	dopr_index(i) = 42
1920	dopr_unit(i) = 'kg/kg'
1921	hom(:,2,42,:) = SPREAD( zu, 2, statistic_regions+1 )
1922	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1923	dopr_initial_index(i) = 27
1924	hom(:,2,27,:) = SPREAD( zu, 2, statistic_regions+1 )
1925	hom(nzb,2,27,:) = 0.0 ! weil zu(nzb) negativ ist
1926	data_output_pr(i) = data_output_pr(i)(2:)
1927	ENDIF
1928	ENDIF
1929
1930	CASE ( 'lpt', '#lpt' )
1931	IF ( .NOT. cloud_physics ) THEN
1932	IF ( myid == 0 ) THEN
1933	PRINT*, '+++ check_parameters: data_output_pr = ', &
1934	data_output_pr(i), &
1935	' is not implemented for cloud_physics = FALSE'
1936	ENDIF
1937	CALL local_stop
1938	ELSE
1939	dopr_index(i) = 4
1940	dopr_unit(i) = 'K'
1941	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
1942	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1943	dopr_initial_index(i) = 7
1944	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
1945	hom(nzb,2,7,:) = 0.0 ! weil zu(nzb) negativ ist
1946	data_output_pr(i) = data_output_pr(i)(2:)
1947	ENDIF
1948	ENDIF
1949
1950	CASE ( 'vpt', '#vpt' )
1951	dopr_index(i) = 44
1952	dopr_unit(i) = 'K'
1953	hom(:,2,44,:) = SPREAD( zu, 2, statistic_regions+1 )
1954	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1955	dopr_initial_index(i) = 29
1956	hom(:,2,29,:) = SPREAD( zu, 2, statistic_regions+1 )
1957	hom(nzb,2,29,:) = 0.0 ! weil zu(nzb) negativ ist
1958	data_output_pr(i) = data_output_pr(i)(2:)
1959	ENDIF
1960
1961	CASE ( 'w"vpt"' )
1962	dopr_index(i) = 45
1963	dopr_unit(i) = 'K m/s'
1964	hom(:,2,45,:) = SPREAD( zw, 2, statistic_regions+1 )
1965
1966	CASE ( 'wvpt' )
1967	dopr_index(i) = 46
1968	dopr_unit(i) = 'K m/s'
1969	hom(:,2,46,:) = SPREAD( zw, 2, statistic_regions+1 )
1970
1971	CASE ( 'wvpt' )
1972	dopr_index(i) = 47
1973	dopr_unit(i) = 'K m/s'
1974	hom(:,2,47,:) = SPREAD( zw, 2, statistic_regions+1 )
1975
1976	CASE ( 'w"q"' )
1977	IF ( .NOT. humidity ) THEN
1978	IF ( myid == 0 ) THEN
1979	PRINT*, '+++ check_parameters: data_output_pr = ', &
1980	data_output_pr(i), &
1981	' is not implemented for humidity = FALSE'
1982	ENDIF
1983	CALL local_stop
1984	ELSE
1985	dopr_index(i) = 48
1986	dopr_unit(i) = 'kg/kg m/s'
1987	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
1988	ENDIF
1989
1990	CASE ( 'wq' )
1991	IF ( .NOT. humidity ) THEN
1992	IF ( myid == 0 ) THEN
1993	PRINT*, '+++ check_parameters: data_output_pr = ', &
1994	data_output_pr(i), &
1995	' is not implemented for humidity = FALSE'
1996	ENDIF
1997	CALL local_stop
1998	ELSE
1999	dopr_index(i) = 49
2000	dopr_unit(i) = 'kg/kg m/s'
2001	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2002	ENDIF
2003
2004	CASE ( 'wq' )
2005	IF ( .NOT. humidity ) THEN
2006	IF ( myid == 0 ) THEN
2007	PRINT*, '+++ check_parameters: data_output_pr = ', &
2008	data_output_pr(i), &
2009	' is not implemented for humidity = FALSE'
2010	ENDIF
2011	CALL local_stop
2012	ELSE
2013	dopr_index(i) = 50
2014	dopr_unit(i) = 'kg/kg m/s'
2015	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2016	ENDIF
2017
2018	CASE ( 'w"s"' )
2019	IF ( .NOT. passive_scalar ) THEN
2020	IF ( myid == 0 ) THEN
2021	PRINT*, '+++ check_parameters: data_output_pr = ', &
2022	data_output_pr(i), &
2023	' is not implemented for passive_scalar = FALSE'
2024	ENDIF
2025	CALL local_stop
2026	ELSE
2027	dopr_index(i) = 48
2028	dopr_unit(i) = 'kg/m3 m/s'
2029	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2030	ENDIF
2031
2032	CASE ( 'ws' )
2033	IF ( .NOT. passive_scalar ) THEN
2034	IF ( myid == 0 ) THEN
2035	PRINT*, '+++ check_parameters: data_output_pr = ', &
2036	data_output_pr(i), &
2037	' is not implemented for passive_scalar = FALSE'
2038	ENDIF
2039	CALL local_stop
2040	ELSE
2041	dopr_index(i) = 49
2042	dopr_unit(i) = 'kg/m3 m/s'
2043	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2044	ENDIF
2045
2046	CASE ( 'ws' )
2047	IF ( .NOT. passive_scalar ) THEN
2048	IF ( myid == 0 ) THEN
2049	PRINT*, '+++ check_parameters: data_output_pr = ', &
2050	data_output_pr(i), &
2051	' is not implemented for passive_scalar = FALSE'
2052	ENDIF
2053	CALL local_stop
2054	ELSE
2055	dopr_index(i) = 50
2056	dopr_unit(i) = 'kg/m3 m/s'
2057	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2058	ENDIF
2059
2060	CASE ( 'w"qv"' )
2061	IF ( humidity .AND. .NOT. cloud_physics ) &
2062	THEN
2063	dopr_index(i) = 48
2064	dopr_unit(i) = 'kg/kg m/s'
2065	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2066	ELSEIF( humidity .AND. cloud_physics ) THEN
2067	dopr_index(i) = 51
2068	dopr_unit(i) = 'kg/kg m/s'
2069	hom(:,2,51,:) = SPREAD( zw, 2, statistic_regions+1 )
2070	ELSE
2071	IF ( myid == 0 ) THEN
2072	PRINT*, '+++ check_parameters: data_output_pr = ', &
2073	data_output_pr(i), &
2074	' is not implemented for cloud_physics = FALSE', &
2075	' and humidity = FALSE'
2076	ENDIF
2077	CALL local_stop
2078	ENDIF
2079
2080	CASE ( 'wqv' )
2081	IF ( humidity .AND. .NOT. cloud_physics ) &
2082	THEN
2083	dopr_index(i) = 49
2084	dopr_unit(i) = 'kg/kg m/s'
2085	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2086	ELSEIF( humidity .AND. cloud_physics ) THEN
2087	dopr_index(i) = 52
2088	dopr_unit(i) = 'kg/kg m/s'
2089	hom(:,2,52,:) = SPREAD( zw, 2, statistic_regions+1 )
2090	ELSE
2091	IF ( myid == 0 ) THEN
2092	PRINT*, '+++ check_parameters: data_output_pr = ', &
2093	data_output_pr(i), &
2094	' is not implemented for cloud_physics = FALSE', &
2095	' and humidity = FALSE'
2096	ENDIF
2097	CALL local_stop
2098	ENDIF
2099
2100	CASE ( 'wqv' )
2101	IF ( humidity .AND. .NOT. cloud_physics ) &
2102	THEN
2103	dopr_index(i) = 50
2104	dopr_unit(i) = 'kg/kg m/s'
2105	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2106	ELSEIF( humidity .AND. cloud_physics ) THEN
2107	dopr_index(i) = 53
2108	dopr_unit(i) = 'kg/kg m/s'
2109	hom(:,2,53,:) = SPREAD( zw, 2, statistic_regions+1 )
2110	ELSE
2111	IF ( myid == 0 ) THEN
2112	PRINT*, '+++ check_parameters: data_output_pr = ', &
2113	data_output_pr(i), &
2114	' is not implemented for cloud_physics = FALSE', &
2115	' and humidity = FALSE'
2116	ENDIF
2117	CALL local_stop
2118	ENDIF
2119
2120	CASE ( 'ql' )
2121	IF ( .NOT. cloud_physics .AND. .NOT. cloud_droplets ) THEN
2122	IF ( myid == 0 ) THEN
2123	PRINT*, '+++ check_parameters: data_output_pr = ', &
2124	data_output_pr(i), &
2125	' is not implemented for cloud_physics = FALSE'
2126	ENDIF
2127	CALL local_stop
2128	ELSE
2129	dopr_index(i) = 54
2130	dopr_unit(i) = 'kg/kg'
2131	hom(:,2,54,:) = SPREAD( zu, 2, statistic_regions+1 )
2132	ENDIF
2133
2134	CASE ( 'wuu*/dz' )
2135	dopr_index(i) = 55
2136	dopr_unit(i) = 'm2/s3'
2137	hom(:,2,55,:) = SPREAD( zu, 2, statistic_regions+1 )
2138
2139	CASE ( 'wp/dz' )
2140	dopr_index(i) = 56
2141	dopr_unit(i) = 'm2/s3'
2142	hom(:,2,56,:) = SPREAD( zw, 2, statistic_regions+1 )
2143
2144	CASE ( 'w"e/dz' )
2145	dopr_index(i) = 57
2146	dopr_unit(i) = 'm2/s3'
2147	hom(:,2,57,:) = SPREAD( zu, 2, statistic_regions+1 )
2148
2149	CASE ( 'u"pt"' )
2150	dopr_index(i) = 58
2151	dopr_unit(i) = 'K m/s'
2152	hom(:,2,58,:) = SPREAD( zu, 2, statistic_regions+1 )
2153
2154	CASE ( 'upt' )
2155	dopr_index(i) = 59
2156	dopr_unit(i) = 'K m/s'
2157	hom(:,2,59,:) = SPREAD( zu, 2, statistic_regions+1 )
2158
2159	CASE ( 'upt_t' )
2160	dopr_index(i) = 60
2161	dopr_unit(i) = 'K m/s'
2162	hom(:,2,60,:) = SPREAD( zu, 2, statistic_regions+1 )
2163
2164	CASE ( 'v"pt"' )
2165	dopr_index(i) = 61
2166	dopr_unit(i) = 'K m/s'
2167	hom(:,2,61,:) = SPREAD( zu, 2, statistic_regions+1 )
2168
2169	CASE ( 'vpt' )
2170	dopr_index(i) = 62
2171	dopr_unit(i) = 'K m/s'
2172	hom(:,2,62,:) = SPREAD( zu, 2, statistic_regions+1 )
2173
2174	CASE ( 'vpt_t' )
2175	dopr_index(i) = 63
2176	dopr_unit(i) = 'K m/s'
2177	hom(:,2,63,:) = SPREAD( zu, 2, statistic_regions+1 )
2178
2179	CASE ( 'rho' )
2180	dopr_index(i) = 64
2181	dopr_unit(i) = 'kg/m3'
2182	hom(:,2,64,:) = SPREAD( zu, 2, statistic_regions+1 )
2183
2184	CASE ( 'w"sa"' )
2185	IF ( .NOT. ocean ) THEN
2186	IF ( myid == 0 ) THEN
2187	PRINT*, '+++ check_parameters: data_output_pr = ', &
2188	data_output_pr(i), &
2189	' is not implemented for ocean = FALSE'
2190	ENDIF
2191	CALL local_stop
2192	ELSE
2193	dopr_index(i) = 65
2194	dopr_unit(i) = 'psu m/s'
2195	hom(:,2,65,:) = SPREAD( zw, 2, statistic_regions+1 )
2196	ENDIF
2197
2198	CASE ( 'wsa' )
2199	IF ( .NOT. ocean ) THEN
2200	IF ( myid == 0 ) THEN
2201	PRINT*, '+++ check_parameters: data_output_pr = ', &
2202	data_output_pr(i), &
2203	' is not implemented for ocean = FALSE'
2204	ENDIF
2205	CALL local_stop
2206	ELSE
2207	dopr_index(i) = 66
2208	dopr_unit(i) = 'psu m/s'
2209	hom(:,2,66,:) = SPREAD( zw, 2, statistic_regions+1 )
2210	ENDIF
2211
2212	CASE ( 'wsa' )
2213	IF ( .NOT. ocean ) THEN
2214	IF ( myid == 0 ) THEN
2215	PRINT*, '+++ check_parameters: data_output_pr = ', &
2216	data_output_pr(i), &
2217	' is not implemented for ocean = FALSE'
2218	ENDIF
2219	CALL local_stop
2220	ELSE
2221	dopr_index(i) = 67
2222	dopr_unit(i) = 'psu m/s'
2223	hom(:,2,67,:) = SPREAD( zw, 2, statistic_regions+1 )
2224	ENDIF
2225
2226	CASE ( 'wp' )
2227	dopr_index(i) = 68
2228	dopr_unit(i) = 'm3/s3'
2229	hom(:,2,68,:) = SPREAD( zu, 2, statistic_regions+1 )
2230
2231	CASE ( 'w"e' )
2232	dopr_index(i) = 69
2233	dopr_unit(i) = 'm3/s3'
2234	hom(:,2,69,:) = SPREAD( zu, 2, statistic_regions+1 )
2235
2236
2237	CASE DEFAULT
2238
2239	CALL user_check_data_output_pr( data_output_pr(i), i, unit )
2240
2241	IF ( unit == 'illegal' ) THEN
2242	IF ( myid == 0 ) THEN
2243	IF ( data_output_pr_user(1) /= ' ' ) THEN
2244	PRINT*, '+++ check_parameters: illegal value for data_',&
2245	'output_pr or data_output_pr_user: "', &
2246	TRIM( data_output_pr(i) ), '"'
2247	ELSE
2248	PRINT*, '+++ check_parameters: illegal value for data_',&
2249	'output_pr: "', TRIM( data_output_pr(i) ),'"'
2250	ENDIF
2251	ENDIF
2252	CALL local_stop
2253	ENDIF
2254
2255	END SELECT
2256	!
2257	!-- Check to which of the predefined coordinate systems the profile belongs
2258	DO k = 1, crmax
2259	IF ( INDEX( cross_profiles(k), ' '//TRIM( data_output_pr(i) )//' ' ) &
2260	/=0 ) &
2261	THEN
2262	dopr_crossindex(i) = k
2263	EXIT
2264	ENDIF
2265	ENDDO
2266	!
2267	!-- Generate the text for the labels of the PROFIL output file. "-characters
2268	!-- must be substituted, otherwise PROFIL would interpret them as TeX
2269	!-- control characters
2270	dopr_label(i) = data_output_pr(i)
2271	position = INDEX( dopr_label(i) , '"' )
2272	DO WHILE ( position /= 0 )
2273	dopr_label(i)(position:position) = ''''
2274	position = INDEX( dopr_label(i) , '"' )
2275	ENDDO
2276
2277	ENDDO
2278
2279	!
2280	!-- y-value range of the coordinate system (PROFIL).
2281	!-- x-value range determined in plot_1d.
2282	IF ( .NOT. ocean ) THEN
2283	cross_uymin = 0.0
2284	IF ( z_max_do1d == -1.0 ) THEN
2285	cross_uymax = zu(nzt+1)
2286	ELSEIF ( z_max_do1d < zu(nzb+1) .OR. z_max_do1d > zu(nzt+1) ) THEN
2287	IF ( myid == 0 ) PRINT*, '+++ check_parameters: z_max_do1d=', &
2288	z_max_do1d,' must be >= ', zu(nzb+1), &
2289	' or <= ', zu(nzt+1)
2290	CALL local_stop
2291	ELSE
2292	cross_uymax = z_max_do1d
2293	ENDIF
2294	ENDIF
2295
2296	!
2297	!-- Check whether the chosen normalizing factor for the coordinate systems is
2298	!-- permissible
2299	DO i = 1, crmax
2300	SELECT CASE ( TRIM( cross_normalized_x(i) ) ) ! TRIM required on IBM
2301
2302	CASE ( '', 'wpt0', 'ws2', 'tsw2', 'ws3', 'ws2tsw', 'wstsw2' )
2303	j = 0
2304
2305	CASE DEFAULT
2306	IF ( myid == 0 ) THEN
2307	PRINT*, '+++ check_parameters: unknown normalize method'
2308	PRINT*, ' cross_normalized_x="',cross_normalized_x(i),'"'
2309	ENDIF
2310	CALL local_stop
2311
2312	END SELECT
2313	SELECT CASE ( TRIM( cross_normalized_y(i) ) ) ! TRIM required on IBM
2314
2315	CASE ( '', 'z_i' )
2316	j = 0
2317
2318	CASE DEFAULT
2319	IF ( myid == 0 ) THEN
2320	PRINT*, '+++ check_parameters: unknown normalize method'
2321	PRINT*, ' cross_normalized_y="',cross_normalized_y(i),'"'
2322	ENDIF
2323	CALL local_stop
2324
2325	END SELECT
2326	ENDDO
2327	!
2328	!-- Check normalized y-value range of the coordinate system (PROFIL)
2329	IF ( z_max_do1d_normalized /= -1.0 .AND. z_max_do1d_normalized <= 0.0 ) &
2330	THEN
2331	IF ( myid == 0 ) PRINT*,'+++ check_parameters: z_max_do1d_normalize', &
2332	'd=', z_max_do1d_normalized, ' must be >= 0.0'
2333	CALL local_stop
2334	ENDIF
2335
2336
2337	!
2338	!-- Append user-defined data output variables to the standard data output
2339	IF ( data_output_user(1) /= ' ' ) THEN
2340	i = 1
2341	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
2342	i = i + 1
2343	ENDDO
2344	j = 1
2345	DO WHILE ( data_output_user(j) /= ' ' .AND. j <= 100 )
2346	IF ( i > 100 ) THEN
2347	IF ( myid == 0 ) THEN
2348	PRINT*, '+++ check_parameters: number of output quantitities', &
2349	' given by data_output and data_output_user'
2350	PRINT*, ' exceeds the limit of 100'
2351	ENDIF
2352	CALL local_stop
2353	ENDIF
2354	data_output(i) = data_output_user(j)
2355	i = i + 1
2356	j = j + 1
2357	ENDDO
2358	ENDIF
2359
2360	!
2361	!-- Check and set steering parameters for 2d/3d data output and averaging
2362	i = 1
2363	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
2364	!
2365	!-- Check for data averaging
2366	ilen = LEN_TRIM( data_output(i) )
2367	j = 0 ! no data averaging
2368	IF ( ilen > 3 ) THEN
2369	IF ( data_output(i)(ilen-2:ilen) == '_av' ) THEN
2370	j = 1 ! data averaging
2371	data_output(i) = data_output(i)(1:ilen-3)
2372	ENDIF
2373	ENDIF
2374	!
2375	!-- Check for cross section or volume data
2376	ilen = LEN_TRIM( data_output(i) )
2377	k = 0 ! 3d data
2378	var = data_output(i)(1:ilen)
2379	IF ( ilen > 3 ) THEN
2380	IF ( data_output(i)(ilen-2:ilen) == '_xy' .OR. &
2381	data_output(i)(ilen-2:ilen) == '_xz' .OR. &
2382	data_output(i)(ilen-2:ilen) == '_yz' ) THEN
2383	k = 1 ! 2d data
2384	var = data_output(i)(1:ilen-3)
2385	ENDIF
2386	ENDIF
2387	!
2388	!-- Check for allowed value and set units
2389	SELECT CASE ( TRIM( var ) )
2390
2391	CASE ( 'e' )
2392	IF ( constant_diffusion ) THEN
2393	IF ( myid == 0 ) THEN
2394	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
2395	'" requires constant_diffusion = .FALSE.'
2396	ENDIF
2397	CALL local_stop
2398	ENDIF
2399	unit = 'm2/s2'
2400
2401	CASE ( 'pc', 'pr' )
2402	IF ( .NOT. particle_advection ) THEN
2403	IF ( myid == 0 ) THEN
2404	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
2405	'" requires a "particles_par"-NAMELIST'
2406	PRINT*, ' in the parameter file (PARIN)'
2407	ENDIF
2408	CALL local_stop
2409	ENDIF
2410	IF ( TRIM( var ) == 'pc' ) unit = 'number'
2411	IF ( TRIM( var ) == 'pr' ) unit = 'm'
2412
2413	CASE ( 'q', 'vpt' )
2414	IF ( .NOT. humidity ) THEN
2415	IF ( myid == 0 ) THEN
2416	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
2417	'" requires humidity = .TRUE.'
2418	ENDIF
2419	CALL local_stop
2420	ENDIF
2421	IF ( TRIM( var ) == 'q' ) unit = 'kg/kg'
2422	IF ( TRIM( var ) == 'vpt' ) unit = 'K'
2423
2424	CASE ( 'ql' )
2425	IF ( .NOT. ( cloud_physics .OR. cloud_droplets ) ) THEN
2426	IF ( myid == 0 ) THEN
2427	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
2428	'" requires cloud_physics = .TRUE.'
2429	PRINT*, ' or cloud_droplets = .TRUE.'
2430	ENDIF
2431	CALL local_stop
2432	ENDIF
2433	unit = 'kg/kg'
2434
2435	CASE ( 'ql_c', 'ql_v', 'ql_vp' )
2436	IF ( .NOT. cloud_droplets ) THEN
2437	IF ( myid == 0 ) THEN
2438	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
2439	'" requires cloud_droplets = .TRUE.'
2440	ENDIF
2441	CALL local_stop
2442	ENDIF
2443	IF ( TRIM( var ) == 'ql_c' ) unit = 'kg/kg'
2444	IF ( TRIM( var ) == 'ql_v' ) unit = 'm3'
2445	IF ( TRIM( var ) == 'ql_vp' ) unit = 'none'
2446
2447	CASE ( 'qv' )
2448	IF ( .NOT. cloud_physics ) THEN
2449	IF ( myid == 0 ) THEN
2450	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
2451	'" requires cloud_physics = .TRUE.'
2452	ENDIF
2453	CALL local_stop
2454	ENDIF
2455	unit = 'kg/kg'
2456
2457	CASE ( 'rho' )
2458	IF ( .NOT. ocean ) THEN
2459	IF ( myid == 0 ) THEN
2460	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
2461	'" requires ocean = .TRUE.'
2462	ENDIF
2463	CALL local_stop
2464	ENDIF
2465	unit = 'kg/m3'
2466
2467	CASE ( 's' )
2468	IF ( .NOT. passive_scalar ) THEN
2469	IF ( myid == 0 ) THEN
2470	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
2471	'" requires passive_scalar = .TRUE.'
2472	ENDIF
2473	CALL local_stop
2474	ENDIF
2475	unit = 'conc'
2476
2477	CASE ( 'sa' )
2478	IF ( .NOT. ocean ) THEN
2479	IF ( myid == 0 ) THEN
2480	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
2481	'" requires ocean = .TRUE.'
2482	ENDIF
2483	CALL local_stop
2484	ENDIF
2485	unit = 'psu'
2486
2487	CASE ( 'u', 't', 'lwp', 'pra', 'prr', 'z0' )
2488	IF ( k == 0 .OR. data_output(i)(ilen-2:ilen) /= '_xy' ) THEN
2489	IF ( myid == 0 ) THEN
2490	PRINT*, '+++ check_parameters: illegal value for data_',&
2491	'output: "', TRIM( var ), '" is only allowed'
2492	PRINT*, ' for horizontal cross section'
2493	ENDIF
2494	CALL local_stop
2495	ENDIF
2496	IF ( TRIM( var ) == 'lwp*' .AND. .NOT. cloud_physics ) THEN
2497	IF ( myid == 0 ) THEN
2498	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
2499	'" requires cloud_physics = .TRUE.'
2500	ENDIF
2501	CALL local_stop
2502	ENDIF
2503	IF ( TRIM( var ) == 'pra*' .AND. .NOT. precipitation ) THEN
2504	IF ( myid == 0 ) THEN
2505	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
2506	'" requires precipitation = .TRUE.'
2507	ENDIF
2508	CALL local_stop
2509	ENDIF
2510	IF ( TRIM( var ) == 'pra*' .AND. j == 1 ) THEN
2511	IF ( myid == 0 ) THEN
2512	PRINT*, '+++ check_parameters: temporal averaging of ', &
2513	' precipitation amount "', TRIM( var ), &
2514	'" not possible'
2515	ENDIF
2516	CALL local_stop
2517	ENDIF
2518	IF ( TRIM( var ) == 'prr*' .AND. .NOT. precipitation ) THEN
2519	IF ( myid == 0 ) THEN
2520	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
2521	'" requires precipitation = .TRUE.'
2522	ENDIF
2523	CALL local_stop
2524	ENDIF
2525
2526
2527	IF ( TRIM( var ) == 'u*' ) unit = 'm/s'
2528	IF ( TRIM( var ) == 't*' ) unit = 'K'
2529	IF ( TRIM( var ) == 'lwp' ) unit = 'kg/kgm'
2530	IF ( TRIM( var ) == 'pra*' ) unit = 'mm'
2531	IF ( TRIM( var ) == 'prr*' ) unit = 'mm/s'
2532	IF ( TRIM( var ) == 'z0*' ) unit = 'm'
2533
2534	CASE ( 'p', 'pt', 'u', 'v', 'w' )
2535	IF ( TRIM( var ) == 'p' ) unit = 'Pa'
2536	IF ( TRIM( var ) == 'pt' ) unit = 'K'
2537	IF ( TRIM( var ) == 'u' ) unit = 'm/s'
2538	IF ( TRIM( var ) == 'v' ) unit = 'm/s'
2539	IF ( TRIM( var ) == 'w' ) unit = 'm/s'
2540	CONTINUE
2541
2542	CASE DEFAULT
2543	CALL user_check_data_output( var, unit )
2544
2545	IF ( unit == 'illegal' ) THEN
2546	IF ( myid == 0 ) THEN
2547	IF ( data_output_user(1) /= ' ' ) THEN
2548	PRINT*, '+++ check_parameters: illegal value for data_',&
2549	'output or data_output_user: "', &
2550	TRIM( data_output(i) ), '"'
2551	ELSE
2552	PRINT*, '+++ check_parameters: illegal value for data_',&
2553	'output: "', TRIM( data_output(i) ), '"'
2554	ENDIF
2555	ENDIF
2556	CALL local_stop
2557	ENDIF
2558
2559	END SELECT
2560	!
2561	!-- Set the internal steering parameters appropriately
2562	IF ( k == 0 ) THEN
2563	do3d_no(j) = do3d_no(j) + 1
2564	do3d(j,do3d_no(j)) = data_output(i)
2565	do3d_unit(j,do3d_no(j)) = unit
2566	ELSE
2567	do2d_no(j) = do2d_no(j) + 1
2568	do2d(j,do2d_no(j)) = data_output(i)
2569	do2d_unit(j,do2d_no(j)) = unit
2570	IF ( data_output(i)(ilen-2:ilen) == '_xy' ) THEN
2571	data_output_xy(j) = .TRUE.
2572	ENDIF
2573	IF ( data_output(i)(ilen-2:ilen) == '_xz' ) THEN
2574	data_output_xz(j) = .TRUE.
2575	ENDIF
2576	IF ( data_output(i)(ilen-2:ilen) == '_yz' ) THEN
2577	data_output_yz(j) = .TRUE.
2578	ENDIF
2579	ENDIF
2580
2581	IF ( j == 1 ) THEN
2582	!
2583	!-- Check, if variable is already subject to averaging
2584	found = .FALSE.
2585	DO k = 1, doav_n
2586	IF ( TRIM( doav(k) ) == TRIM( var ) ) found = .TRUE.
2587	ENDDO
2588
2589	IF ( .NOT. found ) THEN
2590	doav_n = doav_n + 1
2591	doav(doav_n) = var
2592	ENDIF
2593	ENDIF
2594
2595	i = i + 1
2596	ENDDO
2597
2598	!
2599	!-- Store sectional planes in one shared array
2600	section(:,1) = section_xy
2601	section(:,2) = section_xz
2602	section(:,3) = section_yz
2603
2604	!
2605	!-- Upper plot limit (grid point value) for 1D profiles
2606	IF ( z_max_do1d == -1.0 ) THEN
2607	nz_do1d = nzt+1
2608	ELSE
2609	DO k = nzb+1, nzt+1
2610	nz_do1d = k
2611	IF ( zw(k) > z_max_do1d ) EXIT
2612	ENDDO
2613	ENDIF
2614
2615	!
2616	!-- Upper plot limit for 2D vertical sections
2617	IF ( z_max_do2d == -1.0 ) z_max_do2d = zu(nzt)
2618	IF ( z_max_do2d < zu(nzb+1) .OR. z_max_do2d > zu(nzt) ) THEN
2619	IF ( myid == 0 ) PRINT*, '+++ check_parameters: z_max_do2d=', &
2620	z_max_do2d, ' must be >= ', zu(nzb+1), &
2621	'(zu(nzb+1)) and <= ', zu(nzt), ' (zu(nzt))'
2622	CALL local_stop
2623	ENDIF
2624
2625	!
2626	!-- Upper plot limit for 3D arrays
2627	IF ( nz_do3d == -9999 ) nz_do3d = nzt + 1
2628
2629	!
2630	!-- Determine and check accuracy for compressed 3D plot output
2631	IF ( do3d_compress ) THEN
2632	!
2633	!-- Compression only permissible on T3E machines
2634	IF ( host(1:3) /= 't3e' ) THEN
2635	IF ( myid == 0 ) THEN
2636	PRINT*, '+++ check_parameters: do3d_compress = .TRUE. not allow', &
2637	'ed on host "', TRIM( host ), '"'
2638	ENDIF
2639	CALL local_stop
2640	ENDIF
2641
2642	i = 1
2643	DO WHILE ( do3d_comp_prec(i) /= ' ' )
2644
2645	ilen = LEN_TRIM( do3d_comp_prec(i) )
2646	IF ( LLT( do3d_comp_prec(i)(ilen:ilen), '0' ) .OR. &
2647	LGT( do3d_comp_prec(i)(ilen:ilen), '9' ) ) THEN
2648	IF ( myid == 0 ) THEN
2649	PRINT*, '+++ check_parameters: illegal precision: ', &
2650	'do3d_comp_prec(', i, ')="', TRIM(do3d_comp_prec(i)),'"'
2651	ENDIF
2652	CALL local_stop
2653	ENDIF
2654
2655	prec = IACHAR( do3d_comp_prec(i)(ilen:ilen) ) - IACHAR( '0' )
2656	var = do3d_comp_prec(i)(1:ilen-1)
2657
2658	SELECT CASE ( var )
2659
2660	CASE ( 'u' )
2661	j = 1
2662	CASE ( 'v' )
2663	j = 2
2664	CASE ( 'w' )
2665	j = 3
2666	CASE ( 'p' )
2667	j = 4
2668	CASE ( 'pt' )
2669	j = 5
2670
2671	CASE DEFAULT
2672	IF ( myid == 0 ) THEN
2673	PRINT*, '+++ check_parameters: unknown variable in ', &
2674	'assignment'
2675	PRINT*, ' do3d_comp_prec(', i, ')="', &
2676	TRIM( do3d_comp_prec(i) ),'"'
2677	ENDIF
2678	CALL local_stop
2679
2680	END SELECT
2681
2682	plot_3d_precision(j)%precision = prec
2683	i = i + 1
2684
2685	ENDDO
2686	ENDIF
2687
2688	!
2689	!-- Check the data output format(s)
2690	IF ( data_output_format(1) == ' ' ) THEN
2691	!
2692	!-- Default value
2693	netcdf_output = .TRUE.
2694	ELSE
2695	i = 1
2696	DO WHILE ( data_output_format(i) /= ' ' )
2697
2698	SELECT CASE ( data_output_format(i) )
2699
2700	CASE ( 'netcdf' )
2701	netcdf_output = .TRUE.
2702	CASE ( 'iso2d' )
2703	iso2d_output = .TRUE.
2704	CASE ( 'profil' )
2705	profil_output = .TRUE.
2706	CASE ( 'avs' )
2707	avs_output = .TRUE.
2708
2709	CASE DEFAULT
2710	IF ( myid == 0 ) THEN
2711	PRINT*, '+++ check_parameters:'
2712	PRINT*, ' unknown value for data_output_format "', &
2713	TRIM( data_output_format(i) ),'"'
2714	ENDIF
2715	CALL local_stop
2716
2717	END SELECT
2718
2719	i = i + 1
2720	IF ( i > 10 ) EXIT
2721
2722	ENDDO
2723
2724	ENDIF
2725
2726	!
2727	!-- Check netcdf precison
2728	ldum = .FALSE.
2729	CALL define_netcdf_header( 'ch', ldum, 0 )
2730
2731	!
2732	!-- Check, whether a constant diffusion coefficient shall be used
2733	IF ( km_constant /= -1.0 ) THEN
2734	IF ( km_constant < 0.0 ) THEN
2735	IF ( myid == 0 ) PRINT*, '+++ check_parameters: km_constant=', &
2736	km_constant, ' < 0.0'
2737	CALL local_stop
2738	ELSE
2739	IF ( prandtl_number < 0.0 ) THEN
2740	IF ( myid == 0 ) PRINT*,'+++ check_parameters: prandtl_number=',&
2741	prandtl_number, ' < 0.0'
2742	CALL local_stop
2743	ENDIF
2744	constant_diffusion = .TRUE.
2745
2746	IF ( prandtl_layer ) THEN
2747	IF ( myid == 0 ) PRINT*, '+++ check_parameters: prandtl_layer ',&
2748	'is not allowed with fixed value of km'
2749	CALL local_stop
2750	ENDIF
2751	ENDIF
2752	ENDIF
2753
2754	!
2755	!-- In case of non-cyclic lateral boundaries, set the default maximum value
2756	!-- for the horizontal diffusivity used within the outflow damping layer,
2757	!-- and check/set the width of the damping layer
2758	IF ( bc_lr /= 'cyclic' ) THEN
2759	IF ( km_damp_max == -1.0 ) THEN
2760	km_damp_max = 0.5 * dx
2761	ENDIF
2762	IF ( outflow_damping_width == -1.0 ) THEN
2763	outflow_damping_width = MIN( 20, nx/2 )
2764	ENDIF
2765	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > nx ) THEN
2766	IF ( myid == 0 ) PRINT*, '+++ check_parameters: outflow_damping w',&
2767	'idth out of range'
2768	CALL local_stop
2769	ENDIF
2770	ENDIF
2771
2772	IF ( bc_ns /= 'cyclic' ) THEN
2773	IF ( km_damp_max == -1.0 ) THEN
2774	km_damp_max = 0.5 * dy
2775	ENDIF
2776	IF ( outflow_damping_width == -1.0 ) THEN
2777	outflow_damping_width = MIN( 20, ny/2 )
2778	ENDIF
2779	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > ny ) THEN
2780	IF ( myid == 0 ) PRINT*, '+++ check_parameters: outflow_damping w',&
2781	'idth out of range'
2782	CALL local_stop
2783	ENDIF
2784	ENDIF
2785
2786	!
2787	!-- Check value range for rif
2788	IF ( rif_min >= rif_max ) THEN
2789	IF ( myid == 0 ) PRINT*, '+++ check_parameters: rif_min=', rif_min, &
2790	' must be less than rif_max=', rif_max
2791	CALL local_stop
2792	ENDIF
2793
2794	!
2795	!-- Determine upper and lower hight level indices for random perturbations
2796	IF ( disturbance_level_b == -9999999.9 ) THEN
2797	IF ( ocean ) THEN
2798	disturbance_level_b = zu((nzt*2)/3)
2799	disturbance_level_ind_b = ( nzt * 2 ) / 3
2800	ELSE
2801	disturbance_level_b = zu(nzb+3)
2802	disturbance_level_ind_b = nzb + 3
2803	ENDIF
2804	ELSEIF ( disturbance_level_b < zu(3) ) THEN
2805	IF ( myid == 0 ) PRINT*, '+++ check_parameters: disturbance_level_b=',&
2806	disturbance_level_b, ' must be >= ',zu(3), &
2807	'(zu(3))'
2808	CALL local_stop
2809	ELSEIF ( disturbance_level_b > zu(nzt-2) ) THEN
2810	IF ( myid == 0 ) PRINT*, '+++ check_parameters: disturbance_level_b=',&
2811	disturbance_level_b, ' must be <= ',zu(nzt-2),&
2812	'(zu(nzt-2))'
2813	CALL local_stop
2814	ELSE
2815	DO k = 3, nzt-2
2816	IF ( disturbance_level_b <= zu(k) ) THEN
2817	disturbance_level_ind_b = k
2818	EXIT
2819	ENDIF
2820	ENDDO
2821	ENDIF
2822
2823	IF ( disturbance_level_t == -9999999.9 ) THEN
2824	IF ( ocean ) THEN
2825	disturbance_level_t = zu(nzt-3)
2826	disturbance_level_ind_t = nzt - 3
2827	ELSE
2828	disturbance_level_t = zu(nzt/3)
2829	disturbance_level_ind_t = nzt / 3
2830	ENDIF
2831	ELSEIF ( disturbance_level_t > zu(nzt-2) ) THEN
2832	IF ( myid == 0 ) PRINT*, '+++ check_parameters: disturbance_level_t=',&
2833	disturbance_level_t, ' must be <= ',zu(nzt-2),&
2834	'(zu(nzt-2))'
2835	CALL local_stop
2836	ELSEIF ( disturbance_level_t < disturbance_level_b ) THEN
2837	IF ( myid == 0 ) PRINT*, '+++ check_parameters: disturbance_level_t=',&
2838	disturbance_level_t, ' must be >= ', &
2839	'disturbance_level_b=', disturbance_level_b
2840	CALL local_stop
2841	ELSE
2842	DO k = 3, nzt-2
2843	IF ( disturbance_level_t <= zu(k) ) THEN
2844	disturbance_level_ind_t = k
2845	EXIT
2846	ENDIF
2847	ENDDO
2848	ENDIF
2849
2850	!
2851	!-- Check again whether the levels determined this way are ok.
2852	!-- Error may occur at automatic determination and too few grid points in
2853	!-- z-direction.
2854	IF ( disturbance_level_ind_t < disturbance_level_ind_b ) THEN
2855	IF ( myid == 0 ) PRINT*, '+++ check_parameters: ', &
2856	'disturbance_level_ind_t=', &
2857	disturbance_level_ind_t, ' must be >= ', &
2858	'disturbance_level_ind_b=', &
2859	disturbance_level_ind_b
2860	CALL local_stop
2861	ENDIF
2862
2863	!
2864	!-- Determine the horizontal index range for random perturbations.
2865	!-- In case of non-cyclic horizontal boundaries, no perturbations are imposed
2866	!-- near the inflow and the perturbation area is further limited to ...(1)
2867	!-- after the initial phase of the flow.
2868	dist_nxl = 0; dist_nxr = nx
2869	dist_nys = 0; dist_nyn = ny
2870	IF ( bc_lr /= 'cyclic' ) THEN
2871	IF ( inflow_disturbance_begin == -1 ) THEN
2872	inflow_disturbance_begin = MIN( 10, nx/2 )
2873	ENDIF
2874	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > nx )&
2875	THEN
2876	IF ( myid == 0 ) PRINT*, '+++ check_parameters: inflow_disturbance',&
2877	'_begin out of range'
2878	CALL local_stop
2879	ENDIF
2880	IF ( inflow_disturbance_end == -1 ) THEN
2881	inflow_disturbance_end = MIN( 100, 3*nx/4 )
2882	ENDIF
2883	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > nx ) &
2884	THEN
2885	IF ( myid == 0 ) PRINT*, '+++ check_parameters: inflow_disturbance',&
2886	'_end out of range'
2887	CALL local_stop
2888	ENDIF
2889	ELSEIF ( bc_ns /= 'cyclic' ) THEN
2890	IF ( inflow_disturbance_begin == -1 ) THEN
2891	inflow_disturbance_begin = MIN( 10, ny/2 )
2892	ENDIF
2893	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > ny )&
2894	THEN
2895	IF ( myid == 0 ) PRINT*, '+++ check_parameters: inflow_disturbance',&
2896	'_begin out of range'
2897	CALL local_stop
2898	ENDIF
2899	IF ( inflow_disturbance_end == -1 ) THEN
2900	inflow_disturbance_end = MIN( 100, 3*ny/4 )
2901	ENDIF
2902	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > ny ) &
2903	THEN
2904	IF ( myid == 0 ) PRINT*, '+++ check_parameters: inflow_disturbance',&
2905	'_end out of range'
2906	CALL local_stop
2907	ENDIF
2908	ENDIF
2909
2910	IF ( bc_lr == 'radiation/dirichlet' ) THEN
2911	dist_nxr = nx - inflow_disturbance_begin
2912	dist_nxl(1) = nx - inflow_disturbance_end
2913	ELSEIF ( bc_lr == 'dirichlet/radiation' ) THEN
2914	dist_nxl = inflow_disturbance_begin
2915	dist_nxr(1) = inflow_disturbance_end
2916	ENDIF
2917	IF ( bc_ns == 'dirichlet/radiation' ) THEN
2918	dist_nyn = ny - inflow_disturbance_begin
2919	dist_nys(1) = ny - inflow_disturbance_end
2920	ELSEIF ( bc_ns == 'radiation/dirichlet' ) THEN
2921	dist_nys = inflow_disturbance_begin
2922	dist_nyn(1) = inflow_disturbance_end
2923	ENDIF
2924
2925	!
2926	!-- Check random generator
2927	IF ( random_generator /= 'system-specific' .AND. &
2928	random_generator /= 'numerical-recipes' ) THEN
2929	IF ( myid == 0 ) THEN
2930	PRINT*, '+++ check_parameters:'
2931	PRINT*, ' unknown random generator: random_generator=', &
2932	random_generator
2933	ENDIF
2934	CALL local_stop
2935	ENDIF
2936
2937	!
2938	!-- Determine damping level index for 1D model
2939	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
2940	IF ( damp_level_1d == -1.0 ) THEN
2941	damp_level_1d = zu(nzt+1)
2942	damp_level_ind_1d = nzt + 1
2943	ELSEIF ( damp_level_1d < 0.0 .OR. damp_level_1d > zu(nzt+1) ) THEN
2944	IF ( myid == 0 ) PRINT*, '+++ check_parameters: damp_level_1d=', &
2945	damp_level_1d, ' must be > 0.0 and < ', &
2946	'zu(nzt+1)', zu(nzt+1)
2947	CALL local_stop
2948	ELSE
2949	DO k = 1, nzt+1
2950	IF ( damp_level_1d <= zu(k) ) THEN
2951	damp_level_ind_1d = k
2952	EXIT
2953	ENDIF
2954	ENDDO
2955	ENDIF
2956	ENDIF
2957	!
2958	!-- Check some other 1d-model parameters
2959	IF ( TRIM( mixing_length_1d ) /= 'as_in_3d_model' .AND. &
2960	TRIM( mixing_length_1d ) /= 'blackadar' ) THEN
2961	IF ( myid == 0 ) PRINT*, '+++ check_parameters: mixing_length_1d = "', &
2962	TRIM( mixing_length_1d ), '" is unknown'
2963	CALL local_stop
2964	ENDIF
2965	IF ( TRIM( dissipation_1d ) /= 'as_in_3d_model' .AND. &
2966	TRIM( dissipation_1d ) /= 'detering' ) THEN
2967	IF ( myid == 0 ) PRINT*, '+++ check_parameters: dissipation_1d = "', &
2968	TRIM( dissipation_1d ), '" is unknown'
2969	CALL local_stop
2970	ENDIF
2971
2972	!
2973	!-- Set time for the next user defined restart (time_restart is the
2974	!-- internal parameter for steering restart events)
2975	IF ( restart_time /= 9999999.9 ) THEN
2976	IF ( restart_time > simulated_time ) time_restart = restart_time
2977	ELSE
2978	!
2979	!-- In case of a restart run, set internal parameter to default (no restart)
2980	!-- if the NAMELIST-parameter restart_time is omitted
2981	time_restart = 9999999.9
2982	ENDIF
2983
2984	!
2985	!-- Set default value of the time needed to terminate a model run
2986	IF ( termination_time_needed == -1.0 ) THEN
2987	IF ( host(1:3) == 'ibm' ) THEN
2988	termination_time_needed = 300.0
2989	ELSE
2990	termination_time_needed = 35.0
2991	ENDIF
2992	ENDIF
2993
2994	!
2995	!-- Check the time needed to terminate a model run
2996	IF ( host(1:3) == 't3e' ) THEN
2997	!
2998	!-- Time needed must be at least 30 seconds on all CRAY machines, because
2999	!-- MPP_TREMAIN gives the remaining CPU time only in steps of 30 seconds
3000	IF ( termination_time_needed <= 30.0 ) THEN
3001	IF ( myid == 0 ) THEN
3002	PRINT*, '+++ check_parameters: termination_time_needed', &
3003	termination_time_needed
3004	PRINT*, ' must be > 30.0 on host "', host, &
3005	'"'
3006	ENDIF
3007	CALL local_stop
3008	ENDIF
3009	ELSEIF ( host(1:3) == 'ibm' ) THEN
3010	!
3011	!-- On IBM-regatta machines the time should be at least 300 seconds,
3012	!-- because the job time consumed before executing palm (for compiling,
3013	!-- copying of files, etc.) has to be regarded
3014	IF ( termination_time_needed < 300.0 ) THEN
3015	IF ( myid == 0 ) THEN
3016	PRINT*, '+++ WARNING: check_parameters: termination_time_', &
3017	'needed', termination_time_needed
3018	PRINT*, ' should be >= 300.0', &
3019	' on host "', host, '"'
3020	ENDIF
3021	ENDIF
3022	ENDIF
3023
3024
3025	END SUBROUTINE check_parameters

Note: See TracBrowser for help on using the repository browser.

Context Navigation

source: palm/trunk/SOURCE/check_parameters.f90 @ 133

Download in other formats: