Home

Context Navigation

source: palm/trunk/SOURCE/check_parameters.f90 @ 1322

Last change on this file since 1322 was 1322, checked in by raasch, 10 years ago
REAL functions and a lot of REAL constants provided with KIND-attribute, some small bugfixes
Property svn:keywords set to `Id`
File size: 143.6 KB

Line
1	SUBROUTINE check_parameters
2
3	!--------------------------------------------------------------------------------!
4	! This file is part of PALM.
5	!
6	! PALM is free software: you can redistribute it and/or modify it under the terms
7	! of the GNU General Public License as published by the Free Software Foundation,
8	! either version 3 of the License, or (at your option) any later version.
9	!
10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
13	!
14	! You should have received a copy of the GNU General Public License along with
15	! PALM. If not, see <http://www.gnu.org/licenses/>.
16	!
17	! Copyright 1997-2014 Leibniz Universitaet Hannover
18	!--------------------------------------------------------------------------------!
19	!
20	! Current revisions:
21	! -----------------
22	! some REAL constants defined as wp-kind
23	!
24	! Former revisions:
25	! -----------------
26	! $Id: check_parameters.f90 1322 2014-03-20 16:38:49Z raasch $
27	!
28	! 1320 2014-03-20 08:40:49Z raasch
29	! Kind-parameters added to all INTEGER and REAL declaration statements,
30	! kinds are defined in new module kinds,
31	! revision history before 2012 removed,
32	! comment fields (!:) to be used for variable explanations added to
33	! all variable declaration statements
34	!
35	! 1308 2014-03-13 14:58:42Z fricke
36	! +netcdf_data_format_save
37	! Calculate fixed number of output time levels for parallel netcdf output.
38	! For masked data, parallel netcdf output is not tested so far, hence
39	! netcdf_data_format is switched back to non-paralell output.
40	!
41	! 1299 2014-03-06 13:15:21Z heinze
42	! enable usage of large_scale subsidence in combination with large_scale_forcing
43	! output for profile of large scale vertical velocity w_subs added
44	!
45	! 1276 2014-01-15 13:40:41Z heinze
46	! Use LSF_DATA also in case of Dirichlet bottom boundary condition for scalars
47	!
48	! 1241 2013-10-30 11:36:58Z heinze
49	! output for profiles of ug and vg added
50	! set surface_heatflux and surface_waterflux also in dependence on
51	! large_scale_forcing
52	! checks for nudging and large scale forcing from external file
53	!
54	! 1236 2013-09-27 07:21:13Z raasch
55	! check number of spectra levels
56	!
57	! 1216 2013-08-26 09:31:42Z raasch
58	! check for transpose_compute_overlap (temporary)
59	!
60	! 1214 2013-08-21 12:29:17Z kanani
61	! additional check for simultaneous use of vertical grid stretching
62	! and particle advection
63	!
64	! 1212 2013-08-15 08:46:27Z raasch
65	! checks for poisfft_hybrid removed
66	!
67	! 1210 2013-08-14 10:58:20Z raasch
68	! check for fftw
69	!
70	! 1179 2013-06-14 05:57:58Z raasch
71	! checks and settings of buoyancy parameters and switches revised,
72	! initial profile for rho added to hom (id=77)
73	!
74	! 1174 2013-05-31 10:28:08Z gryschka
75	! Bugfix in computing initial profiles for ug, vg, lad, q in case of Atmosphere
76	!
77	! 1159 2013-05-21 11:58:22Z fricke
78	! bc_lr/ns_dirneu/neudir removed
79	!
80	! 1115 2013-03-26 18:16:16Z hoffmann
81	! unused variables removed
82	! drizzle can be used without precipitation
83	!
84	! 1111 2013-03-08 23:54:10Z raasch
85	! ibc_p_b = 2 removed
86	!
87	! 1103 2013-02-20 02:15:53Z raasch
88	! Bugfix: turbulent inflow must not require cyclic fill in restart runs
89	!
90	! 1092 2013-02-02 11:24:22Z raasch
91	! unused variables removed
92	!
93	! 1069 2012-11-28 16:18:43Z maronga
94	! allow usage of topography in combination with cloud physics
95	!
96	! 1065 2012-11-22 17:42:36Z hoffmann
97	! Bugfix: It is not allowed to use cloud_scheme = seifert_beheng without
98	! precipitation in order to save computational resources.
99	!
100	! 1060 2012-11-21 07:19:51Z raasch
101	! additional check for parameter turbulent_inflow
102	!
103	! 1053 2012-11-13 17:11:03Z hoffmann
104	! necessary changes for the new two-moment cloud physics scheme added:
105	! - check cloud physics scheme (Kessler or Seifert and Beheng)
106	! - plant_canopy is not allowed
107	! - currently, only cache loop_optimization is allowed
108	! - initial profiles of nr, qr
109	! - boundary condition of nr, qr
110	! - check output quantities (qr, nr, prr)
111	!
112	! 1036 2012-10-22 13:43:42Z raasch
113	! code put under GPL (PALM 3.9)
114	!
115	! 1031/1034 2012-10-22 11:32:49Z raasch
116	! check of netcdf4 parallel file support
117	!
118	! 1019 2012-09-28 06:46:45Z raasch
119	! non-optimized version of prognostic_equations not allowed any more
120	!
121	! 1015 2012-09-27 09:23:24Z raasch
122	! acc allowed for loop optimization,
123	! checks for adjustment of mixing length to the Prandtl mixing length removed
124	!
125	! 1003 2012-09-14 14:35:53Z raasch
126	! checks for cases with unequal subdomain sizes removed
127	!
128	! 1001 2012-09-13 14:08:46Z raasch
129	! all actions concerning leapfrog- and upstream-spline-scheme removed
130	!
131	! 996 2012-09-07 10:41:47Z raasch
132	! little reformatting
133
134	! 978 2012-08-09 08:28:32Z fricke
135	! setting of bc_lr/ns_dirneu/neudir
136	! outflow damping layer removed
137	! check for z0h*
138	! check for pt_damping_width
139	!
140	! 964 2012-07-26 09:14:24Z raasch
141	! check of old profil-parameters removed
142	!
143	! 940 2012-07-09 14:31:00Z raasch
144	! checks for parameter neutral
145	!
146	! 924 2012-06-06 07:44:41Z maronga
147	! Bugfix: preprocessor directives caused error during compilation
148	!
149	! 892 2012-05-02 13:51:44Z maronga
150	! Bugfix for parameter file check ( excluding __netcdf4 )
151	!
152	! 866 2012-03-28 06:44:41Z raasch
153	! use only 60% of the geostrophic wind as translation speed in case of Galilean
154	! transformation and use_ug_for_galilei_tr = .T. in order to mimimize the
155	! timestep
156	!
157	! 861 2012-03-26 14:18:34Z suehring
158	! Check for topography and ws-scheme removed.
159	! Check for loop_optimization = 'vector' and ws-scheme removed.
160	!
161	! 845 2012-03-07 10:23:05Z maronga
162	! Bugfix: exclude __netcdf4 directive part from namelist file check compilation
163	!
164	! 828 2012-02-21 12:00:36Z raasch
165	! check of collision_kernel extended
166	!
167	! 825 2012-02-19 03:03:44Z raasch
168	! check for collision_kernel and curvature_solution_effects
169	!
170	! 809 2012-01-30 13:32:58Z maronga
171	! Bugfix: replaced .AND. and .NOT. with && and ! in the preprocessor directives
172	!
173	! 807 2012-01-25 11:53:51Z maronga
174	! New cpp directive "__check" implemented which is used by check_namelist_files
175	!
176	! Revision 1.1 1997/08/26 06:29:23 raasch
177	! Initial revision
178	!
179	!
180	! Description:
181	! ------------
182	! Check control parameters and deduce further quantities.
183	!------------------------------------------------------------------------------!
184
185	USE arrays_3d
186	USE cloud_parameters
187	USE constants
188	USE control_parameters
189	USE dvrp_variables
190	USE grid_variables
191	USE indices
192	USE kinds
193	USE model_1d
194	USE netcdf_control
195	USE particle_attributes
196	USE pegrid
197	USE profil_parameter
198	USE spectrum
199	USE statistics
200	USE subsidence_mod
201	USE statistics
202	USE transpose_indices
203
204	IMPLICIT NONE
205
206	CHARACTER (LEN=1) :: sq !:
207	CHARACTER (LEN=6) :: var !:
208	CHARACTER (LEN=7) :: unit !:
209	CHARACTER (LEN=8) :: date !:
210	CHARACTER (LEN=10) :: time !:
211	CHARACTER (LEN=40) :: coupling_string !:
212	CHARACTER (LEN=100) :: action !:
213
214	INTEGER(iwp) :: i !:
215	INTEGER(iwp) :: ilen !:
216	INTEGER(iwp) :: iremote = 0 !:
217	INTEGER(iwp) :: j !:
218	INTEGER(iwp) :: k !:
219	INTEGER(iwp) :: kk !:
220	INTEGER(iwp) :: netcdf_data_format_save !:
221	INTEGER(iwp) :: position !:
222	INTEGER(iwp) :: prec !:
223
224	LOGICAL :: found !:
225	LOGICAL :: ldum !:
226
227	REAL(wp) :: gradient !:
228	REAL(wp) :: remote = 0.0 !:
229	REAL(wp) :: simulation_time_since_reference !:
230
231	!
232	!-- Check for overlap combinations, which are not realized yet
233	IF ( transpose_compute_overlap ) THEN
234	IF ( numprocs == 1 ) STOP '+++ transpose-compute-overlap not implemented for single PE runs'
235	#if defined( __openacc )
236	STOP '+++ transpose-compute-overlap not implemented for GPU usage'
237	#endif
238	ENDIF
239
240	!
241	!-- Warning, if host is not set
242	IF ( host(1:1) == ' ' ) THEN
243	message_string = '"host" is not set. Please check that environment ' // &
244	'variable "localhost" & is set before running PALM'
245	CALL message( 'check_parameters', 'PA0001', 0, 0, 0, 6, 0 )
246	ENDIF
247
248	!
249	!-- Check the coupling mode
250	IF ( coupling_mode /= 'uncoupled' .AND. &
251	coupling_mode /= 'atmosphere_to_ocean' .AND. &
252	coupling_mode /= 'ocean_to_atmosphere' ) THEN
253	message_string = 'illegal coupling mode: ' // TRIM( coupling_mode )
254	CALL message( 'check_parameters', 'PA0002', 1, 2, 0, 6, 0 )
255	ENDIF
256
257	!
258	!-- Check dt_coupling, restart_time, dt_restart, end_time, dx, dy, nx and ny
259	IF ( coupling_mode /= 'uncoupled') THEN
260
261	IF ( dt_coupling == 9999999.9_wp ) THEN
262	message_string = 'dt_coupling is not set but required for coup' // &
263	'ling mode "' // TRIM( coupling_mode ) // '"'
264	CALL message( 'check_parameters', 'PA0003', 1, 2, 0, 6, 0 )
265	ENDIF
266
267	#if defined( __parallel )
268
269	!
270	!-- NOTE: coupled runs have not been implemented in the check_namelist_files
271	!-- program.
272	!-- check_namelist_files will need the following information of the other
273	!-- model (atmosphere/ocean).
274	! dt_coupling = remote
275	! dt_max = remote
276	! restart_time = remote
277	! dt_restart= remote
278	! simulation_time_since_reference = remote
279	! dx = remote
280
281
282	#if ! defined( __check )
283	IF ( myid == 0 ) THEN
284	CALL MPI_SEND( dt_coupling, 1, MPI_REAL, target_id, 11, comm_inter, &
285	ierr )
286	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 11, comm_inter, &
287	status, ierr )
288	ENDIF
289	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
290	#endif
291	IF ( dt_coupling /= remote ) THEN
292	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
293	'": dt_coupling = ', dt_coupling, '& is not equal to ', &
294	'dt_coupling_remote = ', remote
295	CALL message( 'check_parameters', 'PA0004', 1, 2, 0, 6, 0 )
296	ENDIF
297	IF ( dt_coupling <= 0.0 ) THEN
298	#if ! defined( __check )
299	IF ( myid == 0 ) THEN
300	CALL MPI_SEND( dt_max, 1, MPI_REAL, target_id, 19, comm_inter, ierr )
301	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 19, comm_inter, &
302	status, ierr )
303	ENDIF
304	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
305	#endif
306	dt_coupling = MAX( dt_max, remote )
307	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
308	'": dt_coupling <= 0.0 & is not allowed and is reset to ', &
309	'MAX(dt_max(A,O)) = ', dt_coupling
310	CALL message( 'check_parameters', 'PA0005', 0, 1, 0, 6, 0 )
311	ENDIF
312	#if ! defined( __check )
313	IF ( myid == 0 ) THEN
314	CALL MPI_SEND( restart_time, 1, MPI_REAL, target_id, 12, comm_inter, &
315	ierr )
316	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 12, comm_inter, &
317	status, ierr )
318	ENDIF
319	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
320	#endif
321	IF ( restart_time /= remote ) THEN
322	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
323	'": restart_time = ', restart_time, '& is not equal to ', &
324	'restart_time_remote = ', remote
325	CALL message( 'check_parameters', 'PA0006', 1, 2, 0, 6, 0 )
326	ENDIF
327	#if ! defined( __check )
328	IF ( myid == 0 ) THEN
329	CALL MPI_SEND( dt_restart, 1, MPI_REAL, target_id, 13, comm_inter, &
330	ierr )
331	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 13, comm_inter, &
332	status, ierr )
333	ENDIF
334	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
335	#endif
336	IF ( dt_restart /= remote ) THEN
337	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
338	'": dt_restart = ', dt_restart, '& is not equal to ', &
339	'dt_restart_remote = ', remote
340	CALL message( 'check_parameters', 'PA0007', 1, 2, 0, 6, 0 )
341	ENDIF
342
343	simulation_time_since_reference = end_time - coupling_start_time
344	#if ! defined( __check )
345	IF ( myid == 0 ) THEN
346	CALL MPI_SEND( simulation_time_since_reference, 1, MPI_REAL, target_id, &
347	14, comm_inter, ierr )
348	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 14, comm_inter, &
349	status, ierr )
350	ENDIF
351	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
352	#endif
353	IF ( simulation_time_since_reference /= remote ) THEN
354	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
355	'": simulation_time_since_reference = ', &
356	simulation_time_since_reference, '& is not equal to ', &
357	'simulation_time_since_reference_remote = ', remote
358	CALL message( 'check_parameters', 'PA0008', 1, 2, 0, 6, 0 )
359	ENDIF
360
361	#if ! defined( __check )
362	IF ( myid == 0 ) THEN
363	CALL MPI_SEND( dx, 1, MPI_REAL, target_id, 15, comm_inter, ierr )
364	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 15, comm_inter, &
365	status, ierr )
366	ENDIF
367	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
368
369	#endif
370	IF ( coupling_mode == 'atmosphere_to_ocean') THEN
371
372	IF ( dx < remote ) THEN
373	WRITE( message_string, * ) 'coupling mode "', &
374	TRIM( coupling_mode ), &
375	'": dx in Atmosphere is not equal to or not larger then dx in ocean'
376	CALL message( 'check_parameters', 'PA0009', 1, 2, 0, 6, 0 )
377	ENDIF
378
379	IF ( (nx_a+1)dx /= (nx_o+1)remote ) THEN
380	WRITE( message_string, * ) 'coupling mode "', &
381	TRIM( coupling_mode ), &
382	'": Domain size in x-direction is not equal in ocean and atmosphere'
383	CALL message( 'check_parameters', 'PA0010', 1, 2, 0, 6, 0 )
384	ENDIF
385
386	ENDIF
387
388	#if ! defined( __check )
389	IF ( myid == 0) THEN
390	CALL MPI_SEND( dy, 1, MPI_REAL, target_id, 16, comm_inter, ierr )
391	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 16, comm_inter, &
392	status, ierr )
393	ENDIF
394	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
395	#endif
396	IF ( coupling_mode == 'atmosphere_to_ocean') THEN
397
398	IF ( dy < remote ) THEN
399	WRITE( message_string, * ) 'coupling mode "', &
400	TRIM( coupling_mode ), &
401	'": dy in Atmosphere is not equal to or not larger then dy in ocean'
402	CALL message( 'check_parameters', 'PA0011', 1, 2, 0, 6, 0 )
403	ENDIF
404
405	IF ( (ny_a+1)dy /= (ny_o+1)remote ) THEN
406	WRITE( message_string, * ) 'coupling mode "', &
407	TRIM( coupling_mode ), &
408	'": Domain size in y-direction is not equal in ocean and atmosphere'
409	CALL message( 'check_parameters', 'PA0012', 1, 2, 0, 6, 0 )
410	ENDIF
411
412	IF ( MOD(nx_o+1,nx_a+1) /= 0 ) THEN
413	WRITE( message_string, * ) 'coupling mode "', &
414	TRIM( coupling_mode ), &
415	'": nx+1 in ocean is not divisible without remainder with nx+1 in', &
416	' atmosphere'
417	CALL message( 'check_parameters', 'PA0339', 1, 2, 0, 6, 0 )
418	ENDIF
419
420	IF ( MOD(ny_o+1,ny_a+1) /= 0 ) THEN
421	WRITE( message_string, * ) 'coupling mode "', &
422	TRIM( coupling_mode ), &
423	'": ny+1 in ocean is not divisible without remainder with ny+1 in', &
424	' atmosphere'
425	CALL message( 'check_parameters', 'PA0340', 1, 2, 0, 6, 0 )
426	ENDIF
427
428	ENDIF
429	#else
430	WRITE( message_string, * ) 'coupling requires PALM to be called with', &
431	' ''mrun -K parallel'''
432	CALL message( 'check_parameters', 'PA0141', 1, 2, 0, 6, 0 )
433	#endif
434	ENDIF
435
436	#if defined( __parallel ) && ! defined ( __check )
437	!
438	!-- Exchange via intercommunicator
439	IF ( coupling_mode == 'atmosphere_to_ocean' .AND. myid == 0 ) THEN
440	CALL MPI_SEND( humidity, 1, MPI_LOGICAL, target_id, 19, comm_inter, &
441	ierr )
442	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' .AND. myid == 0) THEN
443	CALL MPI_RECV( humidity_remote, 1, MPI_LOGICAL, target_id, 19, &
444	comm_inter, status, ierr )
445	ENDIF
446	CALL MPI_BCAST( humidity_remote, 1, MPI_LOGICAL, 0, comm2d, ierr)
447
448	#endif
449
450
451	!
452	!-- Generate the file header which is used as a header for most of PALM's
453	!-- output files
454	CALL DATE_AND_TIME( date, time )
455	run_date = date(7:8)//'-'//date(5:6)//'-'//date(3:4)
456	run_time = time(1:2)//':'//time(3:4)//':'//time(5:6)
457	IF ( coupling_mode == 'uncoupled' ) THEN
458	coupling_string = ''
459	ELSEIF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
460	coupling_string = ' coupled (atmosphere)'
461	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
462	coupling_string = ' coupled (ocean)'
463	ENDIF
464
465	WRITE ( run_description_header, &
466	'(A,2X,A,2X,A,A,A,I2.2,A,2X,A,A,2X,A,1X,A)' ) &
467	TRIM( version ), TRIM( revision ), 'run: ', &
468	TRIM( run_identifier ), '.', runnr, TRIM( coupling_string ), &
469	'host: ', TRIM( host ), run_date, run_time
470
471	!
472	!-- Check the general loop optimization method
473	IF ( loop_optimization == 'default' ) THEN
474	IF ( host(1:3) == 'nec' ) THEN
475	loop_optimization = 'vector'
476	ELSE
477	loop_optimization = 'cache'
478	ENDIF
479	ENDIF
480
481	SELECT CASE ( TRIM( loop_optimization ) )
482
483	CASE ( 'acc', 'cache', 'vector' )
484	CONTINUE
485
486	CASE DEFAULT
487	message_string = 'illegal value given for loop_optimization: "' // &
488	TRIM( loop_optimization ) // '"'
489	CALL message( 'check_parameters', 'PA0013', 1, 2, 0, 6, 0 )
490
491	END SELECT
492
493	!
494	!-- Check if vertical grid stretching is used together with particles
495	IF ( dz_stretch_level < 100000.0 .AND. particle_advection ) THEN
496	message_string = 'Vertical grid stretching is not allowed together ' // &
497	'with particle advection.'
498	CALL message( 'check_parameters', 'PA0017', 1, 2, 0, 6, 0 )
499	ENDIF
500
501	!
502	!-- Check topography setting (check for illegal parameter combinations)
503	IF ( topography /= 'flat' ) THEN
504	action = ' '
505	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'ws-scheme') THEN
506	WRITE( action, '(A,A)' ) 'scalar_advec = ', scalar_advec
507	ENDIF
508	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme' ) &
509	THEN
510	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
511	ENDIF
512	IF ( psolver == 'sor' ) THEN
513	WRITE( action, '(A,A)' ) 'psolver = ', psolver
514	ENDIF
515	IF ( sloping_surface ) THEN
516	WRITE( action, '(A)' ) 'sloping surface = .TRUE.'
517	ENDIF
518	IF ( galilei_transformation ) THEN
519	WRITE( action, '(A)' ) 'galilei_transformation = .TRUE.'
520	ENDIF
521	IF ( cloud_physics ) THEN
522	WRITE( action, '(A)' ) 'cloud_physics = .TRUE.'
523	ENDIF
524	IF ( cloud_droplets ) THEN
525	WRITE( action, '(A)' ) 'cloud_droplets = .TRUE.'
526	ENDIF
527	IF ( .NOT. prandtl_layer ) THEN
528	WRITE( action, '(A)' ) 'prandtl_layer = .FALSE.'
529	ENDIF
530	IF ( action /= ' ' ) THEN
531	message_string = 'a non-flat topography does not allow ' // &
532	TRIM( action )
533	CALL message( 'check_parameters', 'PA0014', 1, 2, 0, 6, 0 )
534	ENDIF
535	!
536	!-- In case of non-flat topography, check whether the convention how to
537	!-- define the topography grid has been set correctly, or whether the default
538	!-- is applicable. If this is not possible, abort.
539	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
540	IF ( TRIM( topography ) /= 'single_building' .AND. &
541	TRIM( topography ) /= 'single_street_canyon' .AND. &
542	TRIM( topography ) /= 'read_from_file' ) THEN
543	!-- The default value is not applicable here, because it is only valid
544	!-- for the two standard cases 'single_building' and 'read_from_file'
545	!-- defined in init_grid.
546	WRITE( message_string, * ) &
547	'The value for "topography_grid_convention" ', &
548	'is not set. Its default value is & only valid for ', &
549	'"topography" = ''single_building'', ', &
550	'''single_street_canyon'' & or ''read_from_file''.', &
551	' & Choose ''cell_edge'' or ''cell_center''.'
552	CALL message( 'user_check_parameters', 'PA0239', 1, 2, 0, 6, 0 )
553	ELSE
554	!-- The default value is applicable here.
555	!-- Set convention according to topography.
556	IF ( TRIM( topography ) == 'single_building' .OR. &
557	TRIM( topography ) == 'single_street_canyon' ) THEN
558	topography_grid_convention = 'cell_edge'
559	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
560	topography_grid_convention = 'cell_center'
561	ENDIF
562	ENDIF
563	ELSEIF ( TRIM( topography_grid_convention ) /= 'cell_edge' .AND. &
564	TRIM( topography_grid_convention ) /= 'cell_center' ) THEN
565	WRITE( message_string, * ) &
566	'The value for "topography_grid_convention" is ', &
567	'not recognized. & Choose ''cell_edge'' or ''cell_center''.'
568	CALL message( 'user_check_parameters', 'PA0240', 1, 2, 0, 6, 0 )
569	ENDIF
570
571	ENDIF
572
573	!
574	!-- Check ocean setting
575	IF ( ocean ) THEN
576
577	action = ' '
578	IF ( action /= ' ' ) THEN
579	message_string = 'ocean = .T. does not allow ' // TRIM( action )
580	CALL message( 'check_parameters', 'PA0015', 1, 2, 0, 6, 0 )
581	ENDIF
582
583	ELSEIF ( TRIM( coupling_mode ) == 'uncoupled' .AND. &
584	TRIM( coupling_char ) == '_O' ) THEN
585
586	!
587	!-- Check whether an (uncoupled) atmospheric run has been declared as an
588	!-- ocean run (this setting is done via mrun-option -y)
589
590	message_string = 'ocean = .F. does not allow coupling_char = "' // &
591	TRIM( coupling_char ) // '" set by mrun-option "-y"'
592	CALL message( 'check_parameters', 'PA0317', 1, 2, 0, 6, 0 )
593
594	ENDIF
595	!
596	!-- Check cloud scheme
597	IF ( cloud_scheme == 'seifert_beheng' ) THEN
598	icloud_scheme = 0
599	ELSEIF ( cloud_scheme == 'kessler' ) THEN
600	icloud_scheme = 1
601	ELSE
602	message_string = 'unknown cloud microphysics scheme cloud_scheme ="' // &
603	TRIM( cloud_scheme ) // '"'
604	CALL message( 'check_parameters', 'PA0357', 1, 2, 0, 6, 0 )
605	ENDIF
606	!
607	!-- Check whether there are any illegal values
608	!-- Pressure solver:
609	IF ( psolver /= 'poisfft' .AND. &
610	psolver /= 'sor' .AND. psolver /= 'multigrid' ) THEN
611	message_string = 'unknown solver for perturbation pressure: psolver' // &
612	' = "' // TRIM( psolver ) // '"'
613	CALL message( 'check_parameters', 'PA0016', 1, 2, 0, 6, 0 )
614	ENDIF
615
616	IF ( psolver == 'multigrid' ) THEN
617	IF ( cycle_mg == 'w' ) THEN
618	gamma_mg = 2
619	ELSEIF ( cycle_mg == 'v' ) THEN
620	gamma_mg = 1
621	ELSE
622	message_string = 'unknown multigrid cycle: cycle_mg = "' // &
623	TRIM( cycle_mg ) // '"'
624	CALL message( 'check_parameters', 'PA0020', 1, 2, 0, 6, 0 )
625	ENDIF
626	ENDIF
627
628	IF ( fft_method /= 'singleton-algorithm' .AND. &
629	fft_method /= 'temperton-algorithm' .AND. &
630	fft_method /= 'fftw' .AND. &
631	fft_method /= 'system-specific' ) THEN
632	message_string = 'unknown fft-algorithm: fft_method = "' // &
633	TRIM( fft_method ) // '"'
634	CALL message( 'check_parameters', 'PA0021', 1, 2, 0, 6, 0 )
635	ENDIF
636
637	IF( momentum_advec == 'ws-scheme' .AND. &
638	.NOT. call_psolver_at_all_substeps ) THEN
639	message_string = 'psolver must be called at each RK3 substep when "'//&
640	TRIM(momentum_advec) // ' "is used for momentum_advec'
641	CALL message( 'check_parameters', 'PA0344', 1, 2, 0, 6, 0 )
642	END IF
643	!
644	!-- Advection schemes:
645	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme' ) &
646	THEN
647	message_string = 'unknown advection scheme: momentum_advec = "' // &
648	TRIM( momentum_advec ) // '"'
649	CALL message( 'check_parameters', 'PA0022', 1, 2, 0, 6, 0 )
650	ENDIF
651	IF ( ( momentum_advec == 'ws-scheme' .OR. scalar_advec == 'ws-scheme' ) &
652	.AND. ( timestep_scheme == 'euler' .OR. &
653	timestep_scheme == 'runge-kutta-2' ) ) &
654	THEN
655	message_string = 'momentum_advec or scalar_advec = "' &
656	// TRIM( momentum_advec ) // '" is not allowed with timestep_scheme = "' // &
657	TRIM( timestep_scheme ) // '"'
658	CALL message( 'check_parameters', 'PA0023', 1, 2, 0, 6, 0 )
659	ENDIF
660	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'ws-scheme' .AND. &
661	scalar_advec /= 'bc-scheme' ) &
662	THEN
663	message_string = 'unknown advection scheme: scalar_advec = "' // &
664	TRIM( scalar_advec ) // '"'
665	CALL message( 'check_parameters', 'PA0024', 1, 2, 0, 6, 0 )
666	ENDIF
667	IF ( scalar_advec == 'bc-scheme' .AND. loop_optimization == 'cache' ) &
668	THEN
669	message_string = 'advection_scheme scalar_advec = "' &
670	// TRIM( scalar_advec ) // '" not implemented for & loop_optimization = "' // &
671	TRIM( loop_optimization ) // '"'
672	CALL message( 'check_parameters', 'PA0026', 1, 2, 0, 6, 0 )
673	ENDIF
674
675	IF ( use_sgs_for_particles .AND. .NOT. use_upstream_for_tke ) THEN
676	use_upstream_for_tke = .TRUE.
677	message_string = 'use_upstream_for_tke set .TRUE. because ' // &
678	'use_sgs_for_particles = .TRUE.'
679	CALL message( 'check_parameters', 'PA0025', 0, 1, 0, 6, 0 )
680	ENDIF
681
682	IF ( use_sgs_for_particles .AND. curvature_solution_effects ) THEN
683	message_string = 'use_sgs_for_particles = .TRUE. not allowed with ' // &
684	'curvature_solution_effects = .TRUE.'
685	CALL message( 'check_parameters', 'PA0349', 1, 2, 0, 6, 0 )
686	ENDIF
687
688	!
689	!-- Set LOGICAL switches to enhance performance
690	IF ( momentum_advec == 'ws-scheme' ) ws_scheme_mom = .TRUE.
691	IF ( scalar_advec == 'ws-scheme' ) ws_scheme_sca = .TRUE.
692
693	!
694	!-- Timestep schemes:
695	SELECT CASE ( TRIM( timestep_scheme ) )
696
697	CASE ( 'euler' )
698	intermediate_timestep_count_max = 1
699
700	CASE ( 'runge-kutta-2' )
701	intermediate_timestep_count_max = 2
702
703	CASE ( 'runge-kutta-3' )
704	intermediate_timestep_count_max = 3
705
706	CASE DEFAULT
707	message_string = 'unknown timestep scheme: timestep_scheme = "' // &
708	TRIM( timestep_scheme ) // '"'
709	CALL message( 'check_parameters', 'PA0027', 1, 2, 0, 6, 0 )
710
711	END SELECT
712
713	IF ( (momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme') &
714	.AND. timestep_scheme(1:5) == 'runge' ) THEN
715	message_string = 'momentum advection scheme "' // &
716	TRIM( momentum_advec ) // '" & does not work with ' // &
717	'timestep_scheme "' // TRIM( timestep_scheme ) // '"'
718	CALL message( 'check_parameters', 'PA0029', 1, 2, 0, 6, 0 )
719	ENDIF
720
721	!
722	!-- Collision kernels:
723	SELECT CASE ( TRIM( collision_kernel ) )
724
725	CASE ( 'hall', 'hall_fast' )
726	hall_kernel = .TRUE.
727
728	CASE ( 'palm' )
729	palm_kernel = .TRUE.
730
731	CASE ( 'wang', 'wang_fast' )
732	wang_kernel = .TRUE.
733
734	CASE ( 'none' )
735
736
737	CASE DEFAULT
738	message_string = 'unknown collision kernel: collision_kernel = "' // &
739	TRIM( collision_kernel ) // '"'
740	CALL message( 'check_parameters', 'PA0350', 1, 2, 0, 6, 0 )
741
742	END SELECT
743	IF ( collision_kernel(6:9) == 'fast' ) use_kernel_tables = .TRUE.
744
745	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
746	TRIM( initializing_actions ) /= 'cyclic_fill' ) THEN
747	!
748	!-- No restart run: several initialising actions are possible
749	action = initializing_actions
750	DO WHILE ( TRIM( action ) /= '' )
751	position = INDEX( action, ' ' )
752	SELECT CASE ( action(1:position-1) )
753
754	CASE ( 'set_constant_profiles', 'set_1d-model_profiles', &
755	'by_user', 'initialize_vortex', 'initialize_ptanom' )
756	action = action(position+1:)
757
758	CASE DEFAULT
759	message_string = 'initializing_action = "' // &
760	TRIM( action ) // '" unkown or not allowed'
761	CALL message( 'check_parameters', 'PA0030', 1, 2, 0, 6, 0 )
762
763	END SELECT
764	ENDDO
765	ENDIF
766
767	IF ( TRIM( initializing_actions ) == 'initialize_vortex' .AND. &
768	conserve_volume_flow ) THEN
769	message_string = 'initializing_actions = "initialize_vortex"' // &
770	' ist not allowed with conserve_volume_flow = .T.'
771	CALL message( 'check_parameters', 'PA0343', 1, 2, 0, 6, 0 )
772	ENDIF
773
774
775	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
776	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
777	message_string = 'initializing_actions = "set_constant_profiles"' // &
778	' and "set_1d-model_profiles" are not allowed ' // &
779	'simultaneously'
780	CALL message( 'check_parameters', 'PA0031', 1, 2, 0, 6, 0 )
781	ENDIF
782
783	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
784	INDEX( initializing_actions, 'by_user' ) /= 0 ) THEN
785	message_string = 'initializing_actions = "set_constant_profiles"' // &
786	' and "by_user" are not allowed simultaneously'
787	CALL message( 'check_parameters', 'PA0032', 1, 2, 0, 6, 0 )
788	ENDIF
789
790	IF ( INDEX( initializing_actions, 'by_user' ) /= 0 .AND. &
791	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
792	message_string = 'initializing_actions = "by_user" and ' // &
793	'"set_1d-model_profiles" are not allowed simultaneously'
794	CALL message( 'check_parameters', 'PA0033', 1, 2, 0, 6, 0 )
795	ENDIF
796
797	IF ( cloud_physics .AND. .NOT. humidity ) THEN
798	WRITE( message_string, * ) 'cloud_physics = ', cloud_physics, ' is ', &
799	'not allowed with humidity = ', humidity
800	CALL message( 'check_parameters', 'PA0034', 1, 2, 0, 6, 0 )
801	ENDIF
802
803	IF ( precipitation .AND. .NOT. cloud_physics ) THEN
804	WRITE( message_string, * ) 'precipitation = ', precipitation, ' is ', &
805	'not allowed with cloud_physics = ', cloud_physics
806	CALL message( 'check_parameters', 'PA0035', 1, 2, 0, 6, 0 )
807	ENDIF
808
809	IF ( humidity .AND. sloping_surface ) THEN
810	message_string = 'humidity = .TRUE. and sloping_surface = .TRUE. ' // &
811	'are not allowed simultaneously'
812	CALL message( 'check_parameters', 'PA0036', 1, 2, 0, 6, 0 )
813	ENDIF
814
815	IF ( passive_scalar .AND. humidity ) THEN
816	message_string = 'humidity = .TRUE. and passive_scalar = .TRUE. ' // &
817	'is not allowed simultaneously'
818	CALL message( 'check_parameters', 'PA0038', 1, 2, 0, 6, 0 )
819	ENDIF
820
821	IF ( plant_canopy .AND. ( drag_coefficient == 0.0 ) ) THEN
822	message_string = 'plant_canopy = .TRUE. requires a non-zero drag ' // &
823	'coefficient & given value is drag_coefficient = 0.0'
824	CALL message( 'check_parameters', 'PA0041', 1, 2, 0, 6, 0 )
825	ENDIF
826
827	IF ( plant_canopy .AND. cloud_physics .AND. icloud_scheme == 0 ) THEN
828	message_string = 'plant_canopy = .TRUE. requires cloud_scheme /=' // &
829	' seifert_beheng'
830	CALL message( 'check_parameters', 'PA0360', 1, 2, 0, 6, 0 )
831	ENDIF
832
833	IF ( loop_optimization /= 'cache' .AND. cloud_physics .AND. &
834	icloud_scheme == 0 ) THEN
835	message_string = 'cloud_scheme = seifert_beheng requires ' // &
836	'loop_optimization = cache'
837	CALL message( 'check_parameters', 'PA0362', 1, 2, 0, 6, 0 )
838	ENDIF
839
840	! IF ( cloud_physics .AND. icloud_scheme == 0 .AND. &
841	! .NOT. precipitation .AND. .NOT. drizzle ) THEN
842	! message_string = 'cloud_scheme = seifert_beheng requires ' // &
843	! 'precipitation = .TRUE. or drizzle = .TRUE.'
844	! CALL message( 'check_parameters', 'PA0363', 1, 2, 0, 6, 0 )
845	! ENDIF
846
847	!
848	!-- In case of no model continuation run, check initialising parameters and
849	!-- deduce further quantities
850	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
851
852	!
853	!-- Initial profiles for 1D and 3D model, respectively (u,v further below)
854	pt_init = pt_surface
855	IF ( humidity ) THEN
856	q_init = q_surface
857	ENDIF
858	IF ( ocean ) sa_init = sa_surface
859	IF ( passive_scalar ) q_init = s_surface
860	IF ( plant_canopy ) lad = 0.0
861
862	!
863	!--
864	!-- If required, compute initial profile of the geostrophic wind
865	!-- (component ug)
866	i = 1
867	gradient = 0.0
868
869	IF ( .NOT. ocean ) THEN
870
871	ug_vertical_gradient_level_ind(1) = 0
872	ug(0) = ug_surface
873	DO k = 1, nzt+1
874	IF ( i < 11 ) THEN
875	IF ( ug_vertical_gradient_level(i) < zu(k) .AND. &
876	ug_vertical_gradient_level(i) >= 0.0 ) THEN
877	gradient = ug_vertical_gradient(i) / 100.0
878	ug_vertical_gradient_level_ind(i) = k - 1
879	i = i + 1
880	ENDIF
881	ENDIF
882	IF ( gradient /= 0.0 ) THEN
883	IF ( k /= 1 ) THEN
884	ug(k) = ug(k-1) + dzu(k) * gradient
885	ELSE
886	ug(k) = ug_surface + dzu(k) * gradient
887	ENDIF
888	ELSE
889	ug(k) = ug(k-1)
890	ENDIF
891	ENDDO
892
893	ELSE
894
895	ug_vertical_gradient_level_ind(1) = nzt+1
896	ug(nzt+1) = ug_surface
897	DO k = nzt, nzb, -1
898	IF ( i < 11 ) THEN
899	IF ( ug_vertical_gradient_level(i) > zu(k) .AND. &
900	ug_vertical_gradient_level(i) <= 0.0 ) THEN
901	gradient = ug_vertical_gradient(i) / 100.0
902	ug_vertical_gradient_level_ind(i) = k + 1
903	i = i + 1
904	ENDIF
905	ENDIF
906	IF ( gradient /= 0.0 ) THEN
907	IF ( k /= nzt ) THEN
908	ug(k) = ug(k+1) - dzu(k+1) * gradient
909	ELSE
910	ug(k) = ug_surface - 0.5 * dzu(k+1) * gradient
911	ug(k+1) = ug_surface + 0.5 * dzu(k+1) * gradient
912	ENDIF
913	ELSE
914	ug(k) = ug(k+1)
915	ENDIF
916	ENDDO
917
918	ENDIF
919
920	!
921	!-- In case of no given gradients for ug, choose a zero gradient
922	IF ( ug_vertical_gradient_level(1) == -9999999.9_wp ) THEN
923	ug_vertical_gradient_level(1) = 0.0
924	ENDIF
925
926	!
927	!--
928	!-- If required, compute initial profile of the geostrophic wind
929	!-- (component vg)
930	i = 1
931	gradient = 0.0
932
933	IF ( .NOT. ocean ) THEN
934
935	vg_vertical_gradient_level_ind(1) = 0
936	vg(0) = vg_surface
937	DO k = 1, nzt+1
938	IF ( i < 11 ) THEN
939	IF ( vg_vertical_gradient_level(i) < zu(k) .AND. &
940	vg_vertical_gradient_level(i) >= 0.0 ) THEN
941	gradient = vg_vertical_gradient(i) / 100.0
942	vg_vertical_gradient_level_ind(i) = k - 1
943	i = i + 1
944	ENDIF
945	ENDIF
946	IF ( gradient /= 0.0 ) THEN
947	IF ( k /= 1 ) THEN
948	vg(k) = vg(k-1) + dzu(k) * gradient
949	ELSE
950	vg(k) = vg_surface + dzu(k) * gradient
951	ENDIF
952	ELSE
953	vg(k) = vg(k-1)
954	ENDIF
955	ENDDO
956
957	ELSE
958
959	vg_vertical_gradient_level_ind(1) = nzt+1
960	vg(nzt+1) = vg_surface
961	DO k = nzt, nzb, -1
962	IF ( i < 11 ) THEN
963	IF ( vg_vertical_gradient_level(i) > zu(k) .AND. &
964	vg_vertical_gradient_level(i) <= 0.0 ) THEN
965	gradient = vg_vertical_gradient(i) / 100.0
966	vg_vertical_gradient_level_ind(i) = k + 1
967	i = i + 1
968	ENDIF
969	ENDIF
970	IF ( gradient /= 0.0 ) THEN
971	IF ( k /= nzt ) THEN
972	vg(k) = vg(k+1) - dzu(k+1) * gradient
973	ELSE
974	vg(k) = vg_surface - 0.5 * dzu(k+1) * gradient
975	vg(k+1) = vg_surface + 0.5 * dzu(k+1) * gradient
976	ENDIF
977	ELSE
978	vg(k) = vg(k+1)
979	ENDIF
980	ENDDO
981
982	ENDIF
983
984	!
985	!-- In case of no given gradients for vg, choose a zero gradient
986	IF ( vg_vertical_gradient_level(1) == -9999999.9_wp ) THEN
987	vg_vertical_gradient_level(1) = 0.0
988	ENDIF
989
990	!
991	!-- Let the initial wind profiles be the calculated ug/vg profiles or
992	!-- interpolate them from wind profile data (if given)
993	IF ( u_profile(1) == 9999999.9_wp .AND. v_profile(1) == 9999999.9_wp ) THEN
994
995	u_init = ug
996	v_init = vg
997
998	ELSEIF ( u_profile(1) == 0.0 .AND. v_profile(1) == 0.0 ) THEN
999
1000	IF ( uv_heights(1) /= 0.0 ) THEN
1001	message_string = 'uv_heights(1) must be 0.0'
1002	CALL message( 'check_parameters', 'PA0345', 1, 2, 0, 6, 0 )
1003	ENDIF
1004
1005	use_prescribed_profile_data = .TRUE.
1006
1007	kk = 1
1008	u_init(0) = 0.0
1009	v_init(0) = 0.0
1010
1011	DO k = 1, nz+1
1012
1013	IF ( kk < 100 ) THEN
1014	DO WHILE ( uv_heights(kk+1) <= zu(k) )
1015	kk = kk + 1
1016	IF ( kk == 100 ) EXIT
1017	ENDDO
1018	ENDIF
1019
1020	IF ( kk < 100 .AND. uv_heights(kk+1) /= 9999999.9_wp ) THEN
1021	u_init(k) = u_profile(kk) + ( zu(k) - uv_heights(kk) ) / &
1022	( uv_heights(kk+1) - uv_heights(kk) ) * &
1023	( u_profile(kk+1) - u_profile(kk) )
1024	v_init(k) = v_profile(kk) + ( zu(k) - uv_heights(kk) ) / &
1025	( uv_heights(kk+1) - uv_heights(kk) ) * &
1026	( v_profile(kk+1) - v_profile(kk) )
1027	ELSE
1028	u_init(k) = u_profile(kk)
1029	v_init(k) = v_profile(kk)
1030	ENDIF
1031
1032	ENDDO
1033
1034	ELSE
1035
1036	message_string = 'u_profile(1) and v_profile(1) must be 0.0'
1037	CALL message( 'check_parameters', 'PA0346', 1, 2, 0, 6, 0 )
1038
1039	ENDIF
1040
1041	!
1042	!-- Compute initial temperature profile using the given temperature gradients
1043	IF ( .NOT. neutral ) THEN
1044
1045	i = 1
1046	gradient = 0.0
1047
1048	IF ( .NOT. ocean ) THEN
1049
1050	pt_vertical_gradient_level_ind(1) = 0
1051	DO k = 1, nzt+1
1052	IF ( i < 11 ) THEN
1053	IF ( pt_vertical_gradient_level(i) < zu(k) .AND. &
1054	pt_vertical_gradient_level(i) >= 0.0 ) THEN
1055	gradient = pt_vertical_gradient(i) / 100.0
1056	pt_vertical_gradient_level_ind(i) = k - 1
1057	i = i + 1
1058	ENDIF
1059	ENDIF
1060	IF ( gradient /= 0.0 ) THEN
1061	IF ( k /= 1 ) THEN
1062	pt_init(k) = pt_init(k-1) + dzu(k) * gradient
1063	ELSE
1064	pt_init(k) = pt_surface + dzu(k) * gradient
1065	ENDIF
1066	ELSE
1067	pt_init(k) = pt_init(k-1)
1068	ENDIF
1069	ENDDO
1070
1071	ELSE
1072
1073	pt_vertical_gradient_level_ind(1) = nzt+1
1074	DO k = nzt, 0, -1
1075	IF ( i < 11 ) THEN
1076	IF ( pt_vertical_gradient_level(i) > zu(k) .AND. &
1077	pt_vertical_gradient_level(i) <= 0.0 ) THEN
1078	gradient = pt_vertical_gradient(i) / 100.0
1079	pt_vertical_gradient_level_ind(i) = k + 1
1080	i = i + 1
1081	ENDIF
1082	ENDIF
1083	IF ( gradient /= 0.0 ) THEN
1084	IF ( k /= nzt ) THEN
1085	pt_init(k) = pt_init(k+1) - dzu(k+1) * gradient
1086	ELSE
1087	pt_init(k) = pt_surface - 0.5 * dzu(k+1) * gradient
1088	pt_init(k+1) = pt_surface + 0.5 * dzu(k+1) * gradient
1089	ENDIF
1090	ELSE
1091	pt_init(k) = pt_init(k+1)
1092	ENDIF
1093	ENDDO
1094
1095	ENDIF
1096
1097	ENDIF
1098
1099	!
1100	!-- In case of no given temperature gradients, choose gradient of neutral
1101	!-- stratification
1102	IF ( pt_vertical_gradient_level(1) == -9999999.9_wp ) THEN
1103	pt_vertical_gradient_level(1) = 0.0
1104	ENDIF
1105
1106	!
1107	!-- Store temperature gradient at the top boundary for possible Neumann
1108	!-- boundary condition
1109	bc_pt_t_val = ( pt_init(nzt+1) - pt_init(nzt) ) / dzu(nzt+1)
1110
1111	!
1112	!-- If required, compute initial humidity or scalar profile using the given
1113	!-- humidity/scalar gradient. In case of scalar transport, initially store
1114	!-- values of the scalar parameters on humidity parameters
1115	IF ( passive_scalar ) THEN
1116	bc_q_b = bc_s_b
1117	bc_q_t = bc_s_t
1118	q_surface = s_surface
1119	q_surface_initial_change = s_surface_initial_change
1120	q_vertical_gradient = s_vertical_gradient
1121	q_vertical_gradient_level = s_vertical_gradient_level
1122	surface_waterflux = surface_scalarflux
1123	wall_humidityflux = wall_scalarflux
1124	ENDIF
1125
1126	IF ( humidity .OR. passive_scalar ) THEN
1127
1128	i = 1
1129	gradient = 0.0
1130	q_vertical_gradient_level_ind(1) = 0
1131	DO k = 1, nzt+1
1132	IF ( i < 11 ) THEN
1133	IF ( q_vertical_gradient_level(i) < zu(k) .AND. &
1134	q_vertical_gradient_level(i) >= 0.0 ) THEN
1135	gradient = q_vertical_gradient(i) / 100.0
1136	q_vertical_gradient_level_ind(i) = k - 1
1137	i = i + 1
1138	ENDIF
1139	ENDIF
1140	IF ( gradient /= 0.0 ) THEN
1141	IF ( k /= 1 ) THEN
1142	q_init(k) = q_init(k-1) + dzu(k) * gradient
1143	ELSE
1144	q_init(k) = q_init(k-1) + dzu(k) * gradient
1145	ENDIF
1146	ELSE
1147	q_init(k) = q_init(k-1)
1148	ENDIF
1149	!
1150	!-- Avoid negative humidities
1151	IF ( q_init(k) < 0.0 ) THEN
1152	q_init(k) = 0.0
1153	ENDIF
1154	ENDDO
1155
1156	!
1157	!-- In case of no given humidity gradients, choose zero gradient
1158	!-- conditions
1159	IF ( q_vertical_gradient_level(1) == -1.0 ) THEN
1160	q_vertical_gradient_level(1) = 0.0
1161	ENDIF
1162	!
1163	!-- Store humidity, rain water content and rain drop concentration
1164	!-- gradient at the top boundary for possile Neumann boundary condition
1165	bc_q_t_val = ( q_init(nzt+1) - q_init(nzt) ) / dzu(nzt+1)
1166	ENDIF
1167
1168	!
1169	!-- If required, compute initial salinity profile using the given salinity
1170	!-- gradients
1171	IF ( ocean ) THEN
1172
1173	i = 1
1174	gradient = 0.0
1175
1176	sa_vertical_gradient_level_ind(1) = nzt+1
1177	DO k = nzt, 0, -1
1178	IF ( i < 11 ) THEN
1179	IF ( sa_vertical_gradient_level(i) > zu(k) .AND. &
1180	sa_vertical_gradient_level(i) <= 0.0 ) THEN
1181	gradient = sa_vertical_gradient(i) / 100.0
1182	sa_vertical_gradient_level_ind(i) = k + 1
1183	i = i + 1
1184	ENDIF
1185	ENDIF
1186	IF ( gradient /= 0.0 ) THEN
1187	IF ( k /= nzt ) THEN
1188	sa_init(k) = sa_init(k+1) - dzu(k+1) * gradient
1189	ELSE
1190	sa_init(k) = sa_surface - 0.5 * dzu(k+1) * gradient
1191	sa_init(k+1) = sa_surface + 0.5 * dzu(k+1) * gradient
1192	ENDIF
1193	ELSE
1194	sa_init(k) = sa_init(k+1)
1195	ENDIF
1196	ENDDO
1197
1198	ENDIF
1199
1200	!
1201	!-- If required compute the profile of leaf area density used in the plant
1202	!-- canopy model
1203	IF ( plant_canopy ) THEN
1204
1205	i = 1
1206	gradient = 0.0
1207
1208	IF ( .NOT. ocean ) THEN
1209
1210	lad(0) = lad_surface
1211
1212	lad_vertical_gradient_level_ind(1) = 0
1213	DO k = 1, pch_index
1214	IF ( i < 11 ) THEN
1215	IF ( lad_vertical_gradient_level(i) < zu(k) .AND. &
1216	lad_vertical_gradient_level(i) >= 0.0 ) THEN
1217	gradient = lad_vertical_gradient(i)
1218	lad_vertical_gradient_level_ind(i) = k - 1
1219	i = i + 1
1220	ENDIF
1221	ENDIF
1222	IF ( gradient /= 0.0 ) THEN
1223	IF ( k /= 1 ) THEN
1224	lad(k) = lad(k-1) + dzu(k) * gradient
1225	ELSE
1226	lad(k) = lad_surface + dzu(k) *gradient
1227	ENDIF
1228	ELSE
1229	lad(k) = lad(k-1)
1230	ENDIF
1231	ENDDO
1232
1233	ENDIF
1234
1235	!
1236	!-- In case of no given leaf area density gradients, choose a vanishing
1237	!-- gradient
1238	IF ( lad_vertical_gradient_level(1) == -9999999.9_wp ) THEN
1239	lad_vertical_gradient_level(1) = 0.0
1240	ENDIF
1241
1242	ENDIF
1243
1244	ENDIF
1245
1246	!
1247	!-- Initialize large scale subsidence if required
1248	If ( large_scale_subsidence ) THEN
1249	IF ( subs_vertical_gradient_level(1) /= -9999999.9_wp .AND. &
1250	.NOT. large_scale_forcing ) THEN
1251	CALL init_w_subsidence
1252	ENDIF
1253	!
1254	!-- In case large_scale_forcing is used, profiles for subsidence velocity
1255	!-- are read in from file LSF_DATA
1256
1257	IF ( subs_vertical_gradient_level(1) == -9999999.9_wp .AND. &
1258	.NOT. large_scale_forcing ) THEN
1259	message_string = 'There is no default large scale vertical ' // &
1260	'velocity profile set. Specify the subsidence ' // &
1261	'velocity profile via subs_vertical_gradient and ' // &
1262	'subs_vertical_gradient_level.'
1263	CALL message( 'check_parameters', 'PA0380', 1, 2, 0, 6, 0 )
1264	ENDIF
1265	ELSE
1266	IF ( subs_vertical_gradient_level(1) /= -9999999.9_wp ) THEN
1267	message_string = 'Enable usage of large scale subsidence by ' // &
1268	'setting large_scale_subsidence = .T..'
1269	CALL message( 'check_parameters', 'PA0381', 1, 2, 0, 6, 0 )
1270	ENDIF
1271	ENDIF
1272
1273	!
1274	!-- Compute Coriolis parameter
1275	f = 2.0 * omega * SIN( phi / 180.0 * pi )
1276	fs = 2.0 * omega * COS( phi / 180.0 * pi )
1277
1278	!
1279	!-- Check and set buoyancy related parameters and switches
1280	IF ( reference_state == 'horizontal_average' ) THEN
1281	CONTINUE
1282	ELSEIF ( reference_state == 'initial_profile' ) THEN
1283	use_initial_profile_as_reference = .TRUE.
1284	ELSEIF ( reference_state == 'single_value' ) THEN
1285	use_single_reference_value = .TRUE.
1286	IF ( pt_reference == 9999999.9_wp ) pt_reference = pt_surface
1287	vpt_reference = pt_reference * ( 1.0 + 0.61 * q_surface )
1288	ELSE
1289	message_string = 'illegal value for reference_state: "' // &
1290	TRIM( reference_state ) // '"'
1291	CALL message( 'check_parameters', 'PA0056', 1, 2, 0, 6, 0 )
1292	ENDIF
1293
1294	!
1295	!-- Ocean runs always use reference values in the buoyancy term
1296	IF ( ocean ) THEN
1297	reference_state = 'single_value'
1298	use_single_reference_value = .TRUE.
1299	ENDIF
1300
1301	!
1302	!-- Sign of buoyancy/stability terms
1303	IF ( ocean ) atmos_ocean_sign = -1.0
1304
1305	!
1306	!-- Ocean version must use flux boundary conditions at the top
1307	IF ( ocean .AND. .NOT. use_top_fluxes ) THEN
1308	message_string = 'use_top_fluxes must be .TRUE. in ocean version'
1309	CALL message( 'check_parameters', 'PA0042', 1, 2, 0, 6, 0 )
1310	ENDIF
1311
1312	!
1313	!-- In case of a given slope, compute the relevant quantities
1314	IF ( alpha_surface /= 0.0 ) THEN
1315	IF ( ABS( alpha_surface ) > 90.0 ) THEN
1316	WRITE( message_string, * ) 'ABS( alpha_surface = ', alpha_surface, &
1317	' ) must be < 90.0'
1318	CALL message( 'check_parameters', 'PA0043', 1, 2, 0, 6, 0 )
1319	ENDIF
1320	sloping_surface = .TRUE.
1321	cos_alpha_surface = COS( alpha_surface / 180.0 * pi )
1322	sin_alpha_surface = SIN( alpha_surface / 180.0 * pi )
1323	ENDIF
1324
1325	!
1326	!-- Check time step and cfl_factor
1327	IF ( dt /= -1.0 ) THEN
1328	IF ( dt <= 0.0 .AND. dt /= -1.0 ) THEN
1329	WRITE( message_string, * ) 'dt = ', dt , ' <= 0.0'
1330	CALL message( 'check_parameters', 'PA0044', 1, 2, 0, 6, 0 )
1331	ENDIF
1332	dt_3d = dt
1333	dt_fixed = .TRUE.
1334	ENDIF
1335
1336	IF ( cfl_factor <= 0.0 .OR. cfl_factor > 1.0 ) THEN
1337	IF ( cfl_factor == -1.0 ) THEN
1338	IF ( timestep_scheme == 'runge-kutta-2' ) THEN
1339	cfl_factor = 0.8
1340	ELSEIF ( timestep_scheme == 'runge-kutta-3' ) THEN
1341	cfl_factor = 0.9
1342	ELSE
1343	cfl_factor = 0.9
1344	ENDIF
1345	ELSE
1346	WRITE( message_string, * ) 'cfl_factor = ', cfl_factor, &
1347	' out of range & 0.0 < cfl_factor <= 1.0 is required'
1348	CALL message( 'check_parameters', 'PA0045', 1, 2, 0, 6, 0 )
1349	ENDIF
1350	ENDIF
1351
1352	!
1353	!-- Store simulated time at begin
1354	simulated_time_at_begin = simulated_time
1355
1356	!
1357	!-- Store reference time for coupled runs and change the coupling flag,
1358	!-- if ...
1359	IF ( simulated_time == 0.0 ) THEN
1360	IF ( coupling_start_time == 0.0 ) THEN
1361	time_since_reference_point = 0.0
1362	ELSEIF ( time_since_reference_point < 0.0 ) THEN
1363	run_coupled = .FALSE.
1364	ENDIF
1365	ENDIF
1366
1367	!
1368	!-- Set wind speed in the Galilei-transformed system
1369	IF ( galilei_transformation ) THEN
1370	IF ( use_ug_for_galilei_tr .AND. &
1371	ug_vertical_gradient_level(1) == 0.0 .AND. &
1372	ug_vertical_gradient(1) == 0.0 .AND. &
1373	vg_vertical_gradient_level(1) == 0.0 .AND. &
1374	vg_vertical_gradient(1) == 0.0 ) THEN
1375	u_gtrans = ug_surface * 0.6
1376	v_gtrans = vg_surface * 0.6
1377	ELSEIF ( use_ug_for_galilei_tr .AND. &
1378	( ug_vertical_gradient_level(1) /= 0.0 .OR. &
1379	ug_vertical_gradient(1) /= 0.0 ) ) THEN
1380	message_string = 'baroclinicity (ug) not allowed simultaneously' // &
1381	' with galilei transformation'
1382	CALL message( 'check_parameters', 'PA0046', 1, 2, 0, 6, 0 )
1383	ELSEIF ( use_ug_for_galilei_tr .AND. &
1384	( vg_vertical_gradient_level(1) /= 0.0 .OR. &
1385	vg_vertical_gradient(1) /= 0.0 ) ) THEN
1386	message_string = 'baroclinicity (vg) not allowed simultaneously' // &
1387	' with galilei transformation'
1388	CALL message( 'check_parameters', 'PA0047', 1, 2, 0, 6, 0 )
1389	ELSE
1390	message_string = 'variable translation speed used for galilei-' // &
1391	'transformation, which may cause & instabilities in stably ' // &
1392	'stratified regions'
1393	CALL message( 'check_parameters', 'PA0048', 0, 1, 0, 6, 0 )
1394	ENDIF
1395	ENDIF
1396
1397	!
1398	!-- In case of using a prandtl-layer, calculated (or prescribed) surface
1399	!-- fluxes have to be used in the diffusion-terms
1400	IF ( prandtl_layer ) use_surface_fluxes = .TRUE.
1401
1402	!
1403	!-- Check boundary conditions and set internal variables:
1404	!-- Lateral boundary conditions
1405	IF ( bc_lr /= 'cyclic' .AND. bc_lr /= 'dirichlet/radiation' .AND. &
1406	bc_lr /= 'radiation/dirichlet' ) THEN
1407	message_string = 'unknown boundary condition: bc_lr = "' // &
1408	TRIM( bc_lr ) // '"'
1409	CALL message( 'check_parameters', 'PA0049', 1, 2, 0, 6, 0 )
1410	ENDIF
1411	IF ( bc_ns /= 'cyclic' .AND. bc_ns /= 'dirichlet/radiation' .AND. &
1412	bc_ns /= 'radiation/dirichlet' ) THEN
1413	message_string = 'unknown boundary condition: bc_ns = "' // &
1414	TRIM( bc_ns ) // '"'
1415	CALL message( 'check_parameters', 'PA0050', 1, 2, 0, 6, 0 )
1416	ENDIF
1417
1418	!
1419	!-- Internal variables used for speed optimization in if clauses
1420	IF ( bc_lr /= 'cyclic' ) bc_lr_cyc = .FALSE.
1421	IF ( bc_lr == 'dirichlet/radiation' ) bc_lr_dirrad = .TRUE.
1422	IF ( bc_lr == 'radiation/dirichlet' ) bc_lr_raddir = .TRUE.
1423	IF ( bc_ns /= 'cyclic' ) bc_ns_cyc = .FALSE.
1424	IF ( bc_ns == 'dirichlet/radiation' ) bc_ns_dirrad = .TRUE.
1425	IF ( bc_ns == 'radiation/dirichlet' ) bc_ns_raddir = .TRUE.
1426
1427	!
1428	!-- Non-cyclic lateral boundaries require the multigrid method and Piascek-
1429	!-- Willimas or Wicker - Skamarock advection scheme. Several schemes
1430	!-- and tools do not work with non-cyclic boundary conditions.
1431	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
1432	IF ( psolver /= 'multigrid' ) THEN
1433	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1434	'psolver = "' // TRIM( psolver ) // '"'
1435	CALL message( 'check_parameters', 'PA0051', 1, 2, 0, 6, 0 )
1436	ENDIF
1437	IF ( momentum_advec /= 'pw-scheme' .AND. &
1438	momentum_advec /= 'ws-scheme') THEN
1439	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1440	'momentum_advec = "' // TRIM( momentum_advec ) // '"'
1441	CALL message( 'check_parameters', 'PA0052', 1, 2, 0, 6, 0 )
1442	ENDIF
1443	IF ( scalar_advec /= 'pw-scheme' .AND. &
1444	scalar_advec /= 'ws-scheme' ) THEN
1445	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1446	'scalar_advec = "' // TRIM( scalar_advec ) // '"'
1447	CALL message( 'check_parameters', 'PA0053', 1, 2, 0, 6, 0 )
1448	ENDIF
1449	IF ( galilei_transformation ) THEN
1450	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1451	'galilei_transformation = .T.'
1452	CALL message( 'check_parameters', 'PA0054', 1, 2, 0, 6, 0 )
1453	ENDIF
1454	ENDIF
1455
1456	!
1457	!-- Bottom boundary condition for the turbulent Kinetic energy
1458	IF ( bc_e_b == 'neumann' ) THEN
1459	ibc_e_b = 1
1460	ELSEIF ( bc_e_b == '(u)*2+neumann' ) THEN
1461	ibc_e_b = 2
1462	IF ( prandtl_layer ) THEN
1463	message_string = 'adjust mixing length = FALSE and bc_e_b = "' // &
1464	TRIM( bc_e_b ) // '"'
1465	CALL message( 'check_parameters', 'PA0056', 0, 1, 0, 6, 0 )
1466	ENDIF
1467	IF ( .NOT. prandtl_layer ) THEN
1468	bc_e_b = 'neumann'
1469	ibc_e_b = 1
1470	message_string = 'boundary condition bc_e_b changed to "' // &
1471	TRIM( bc_e_b ) // '"'
1472	CALL message( 'check_parameters', 'PA0057', 0, 1, 0, 6, 0 )
1473	ENDIF
1474	ELSE
1475	message_string = 'unknown boundary condition: bc_e_b = "' // &
1476	TRIM( bc_e_b ) // '"'
1477	CALL message( 'check_parameters', 'PA0058', 1, 2, 0, 6, 0 )
1478	ENDIF
1479
1480	!
1481	!-- Boundary conditions for perturbation pressure
1482	IF ( bc_p_b == 'dirichlet' ) THEN
1483	ibc_p_b = 0
1484	ELSEIF ( bc_p_b == 'neumann' ) THEN
1485	ibc_p_b = 1
1486	ELSE
1487	message_string = 'unknown boundary condition: bc_p_b = "' // &
1488	TRIM( bc_p_b ) // '"'
1489	CALL message( 'check_parameters', 'PA0059', 1, 2, 0, 6, 0 )
1490	ENDIF
1491
1492	IF ( bc_p_t == 'dirichlet' ) THEN
1493	ibc_p_t = 0
1494	ELSEIF ( bc_p_t == 'neumann' ) THEN
1495	ibc_p_t = 1
1496	ELSE
1497	message_string = 'unknown boundary condition: bc_p_t = "' // &
1498	TRIM( bc_p_t ) // '"'
1499	CALL message( 'check_parameters', 'PA0061', 1, 2, 0, 6, 0 )
1500	ENDIF
1501
1502	!
1503	!-- Boundary conditions for potential temperature
1504	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
1505	ibc_pt_b = 2
1506	ELSE
1507	IF ( bc_pt_b == 'dirichlet' ) THEN
1508	ibc_pt_b = 0
1509	ELSEIF ( bc_pt_b == 'neumann' ) THEN
1510	ibc_pt_b = 1
1511	ELSE
1512	message_string = 'unknown boundary condition: bc_pt_b = "' // &
1513	TRIM( bc_pt_b ) // '"'
1514	CALL message( 'check_parameters', 'PA0062', 1, 2, 0, 6, 0 )
1515	ENDIF
1516	ENDIF
1517
1518	IF ( bc_pt_t == 'dirichlet' ) THEN
1519	ibc_pt_t = 0
1520	ELSEIF ( bc_pt_t == 'neumann' ) THEN
1521	ibc_pt_t = 1
1522	ELSEIF ( bc_pt_t == 'initial_gradient' ) THEN
1523	ibc_pt_t = 2
1524	ELSE
1525	message_string = 'unknown boundary condition: bc_pt_t = "' // &
1526	TRIM( bc_pt_t ) // '"'
1527	CALL message( 'check_parameters', 'PA0063', 1, 2, 0, 6, 0 )
1528	ENDIF
1529
1530	IF ( surface_heatflux == 9999999.9_wp ) THEN
1531	constant_heatflux = .FALSE.
1532	IF ( large_scale_forcing ) THEN
1533	IF ( ibc_pt_b == 0 ) THEN
1534	constant_heatflux = .FALSE.
1535	ELSEIF ( ibc_pt_b == 1 ) THEN
1536	constant_heatflux = .TRUE.
1537	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
1538	surface_heatflux = shf_surf(1)
1539	ENDIF
1540	ENDIF
1541	ENDIF
1542	ELSE
1543	constant_heatflux = .TRUE.
1544	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
1545	large_scale_forcing ) THEN
1546	surface_heatflux = shf_surf(1)
1547	ENDIF
1548	ENDIF
1549
1550	IF ( top_heatflux == 9999999.9_wp ) constant_top_heatflux = .FALSE.
1551
1552	IF ( neutral ) THEN
1553
1554	IF ( surface_heatflux /= 0.0 .AND. surface_heatflux /= 9999999.9_wp ) &
1555	THEN
1556	message_string = 'heatflux must not be set for pure neutral flow'
1557	CALL message( 'check_parameters', 'PA0351', 1, 2, 0, 6, 0 )
1558	ENDIF
1559
1560	IF ( top_heatflux /= 0.0 .AND. top_heatflux /= 9999999.9_wp ) &
1561	THEN
1562	message_string = 'heatflux must not be set for pure neutral flow'
1563	CALL message( 'check_parameters', 'PA0351', 1, 2, 0, 6, 0 )
1564	ENDIF
1565
1566	ENDIF
1567
1568	IF ( top_momentumflux_u /= 9999999.9_wp .AND. &
1569	top_momentumflux_v /= 9999999.9_wp ) THEN
1570	constant_top_momentumflux = .TRUE.
1571	ELSEIF ( .NOT. ( top_momentumflux_u == 9999999.9_wp .AND. &
1572	top_momentumflux_v == 9999999.9_wp ) ) THEN
1573	message_string = 'both, top_momentumflux_u AND top_momentumflux_v ' // &
1574	'must be set'
1575	CALL message( 'check_parameters', 'PA0064', 1, 2, 0, 6, 0 )
1576	ENDIF
1577
1578	!
1579	!-- A given surface temperature implies Dirichlet boundary condition for
1580	!-- temperature. In this case specification of a constant heat flux is
1581	!-- forbidden.
1582	IF ( ibc_pt_b == 0 .AND. constant_heatflux .AND. &
1583	surface_heatflux /= 0.0 ) THEN
1584	message_string = 'boundary_condition: bc_pt_b = "' // TRIM( bc_pt_b ) //&
1585	'& is not allowed with constant_heatflux = .TRUE.'
1586	CALL message( 'check_parameters', 'PA0065', 1, 2, 0, 6, 0 )
1587	ENDIF
1588	IF ( constant_heatflux .AND. pt_surface_initial_change /= 0.0 ) THEN
1589	WRITE ( message_string, * ) 'constant_heatflux = .TRUE. is not allo', &
1590	'wed with pt_surface_initial_change (/=0) = ', &
1591	pt_surface_initial_change
1592	CALL message( 'check_parameters', 'PA0066', 1, 2, 0, 6, 0 )
1593	ENDIF
1594
1595	!
1596	!-- A given temperature at the top implies Dirichlet boundary condition for
1597	!-- temperature. In this case specification of a constant heat flux is
1598	!-- forbidden.
1599	IF ( ibc_pt_t == 0 .AND. constant_top_heatflux .AND. &
1600	top_heatflux /= 0.0 ) THEN
1601	message_string = 'boundary_condition: bc_pt_t = "' // TRIM( bc_pt_t ) //&
1602	'" is not allowed with constant_top_heatflux = .TRUE.'
1603	CALL message( 'check_parameters', 'PA0067', 1, 2, 0, 6, 0 )
1604	ENDIF
1605
1606	!
1607	!-- Boundary conditions for salinity
1608	IF ( ocean ) THEN
1609	IF ( bc_sa_t == 'dirichlet' ) THEN
1610	ibc_sa_t = 0
1611	ELSEIF ( bc_sa_t == 'neumann' ) THEN
1612	ibc_sa_t = 1
1613	ELSE
1614	message_string = 'unknown boundary condition: bc_sa_t = "' // &
1615	TRIM( bc_sa_t ) // '"'
1616	CALL message( 'check_parameters', 'PA0068', 1, 2, 0, 6, 0 )
1617	ENDIF
1618
1619	IF ( top_salinityflux == 9999999.9_wp ) constant_top_salinityflux = .FALSE.
1620	IF ( ibc_sa_t == 1 .AND. top_salinityflux == 9999999.9_wp ) THEN
1621	message_string = 'boundary condition: bc_sa_t = "' // &
1622	TRIM( bc_sa_t ) // '" requires to set ' // &
1623	'top_salinityflux'
1624	CALL message( 'check_parameters', 'PA0069', 1, 2, 0, 6, 0 )
1625	ENDIF
1626
1627	!
1628	!-- A fixed salinity at the top implies Dirichlet boundary condition for
1629	!-- salinity. In this case specification of a constant salinity flux is
1630	!-- forbidden.
1631	IF ( ibc_sa_t == 0 .AND. constant_top_salinityflux .AND. &
1632	top_salinityflux /= 0.0 ) THEN
1633	message_string = 'boundary condition: bc_sa_t = "' // &
1634	TRIM( bc_sa_t ) // '" is not allowed with ' // &
1635	'constant_top_salinityflux = .TRUE.'
1636	CALL message( 'check_parameters', 'PA0070', 1, 2, 0, 6, 0 )
1637	ENDIF
1638
1639	ENDIF
1640
1641	!
1642	!-- In case of humidity or passive scalar, set boundary conditions for total
1643	!-- water content / scalar
1644	IF ( humidity .OR. passive_scalar ) THEN
1645	IF ( humidity ) THEN
1646	sq = 'q'
1647	ELSE
1648	sq = 's'
1649	ENDIF
1650	IF ( bc_q_b == 'dirichlet' ) THEN
1651	ibc_q_b = 0
1652	ELSEIF ( bc_q_b == 'neumann' ) THEN
1653	ibc_q_b = 1
1654	ELSE
1655	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
1656	'_b ="' // TRIM( bc_q_b ) // '"'
1657	CALL message( 'check_parameters', 'PA0071', 1, 2, 0, 6, 0 )
1658	ENDIF
1659	IF ( bc_q_t == 'dirichlet' ) THEN
1660	ibc_q_t = 0
1661	ELSEIF ( bc_q_t == 'neumann' ) THEN
1662	ibc_q_t = 1
1663	ELSE
1664	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
1665	'_t ="' // TRIM( bc_q_t ) // '"'
1666	CALL message( 'check_parameters', 'PA0072', 1, 2, 0, 6, 0 )
1667	ENDIF
1668
1669	IF ( surface_waterflux == 9999999.9_wp ) THEN
1670	constant_waterflux = .FALSE.
1671	IF ( large_scale_forcing ) THEN
1672	IF ( ibc_q_b == 0 ) THEN
1673	constant_waterflux = .FALSE.
1674	ELSEIF ( ibc_q_b == 1 ) THEN
1675	constant_waterflux = .TRUE.
1676	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
1677	surface_waterflux = qsws_surf(1)
1678	ENDIF
1679	ENDIF
1680	ENDIF
1681	ELSE
1682	constant_waterflux = .TRUE.
1683	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
1684	large_scale_forcing ) THEN
1685	surface_waterflux = qsws_surf(1)
1686	ENDIF
1687	ENDIF
1688
1689	!
1690	!-- A given surface humidity implies Dirichlet boundary condition for
1691	!-- humidity. In this case specification of a constant water flux is
1692	!-- forbidden.
1693	IF ( ibc_q_b == 0 .AND. constant_waterflux ) THEN
1694	message_string = 'boundary condition: bc_' // TRIM( sq ) // '_b ' // &
1695	'= "' // TRIM( bc_q_b ) // '" is not allowed wi' // &
1696	'th prescribed surface flux'
1697	CALL message( 'check_parameters', 'PA0073', 1, 2, 0, 6, 0 )
1698	ENDIF
1699	IF ( constant_waterflux .AND. q_surface_initial_change /= 0.0 ) THEN
1700	WRITE( message_string, * ) 'a prescribed surface flux is not allo', &
1701	'wed with ', sq, '_surface_initial_change (/=0) = ', &
1702	q_surface_initial_change
1703	CALL message( 'check_parameters', 'PA0074', 1, 2, 0, 6, 0 )
1704	ENDIF
1705
1706	ENDIF
1707	!
1708	!-- Boundary conditions for horizontal components of wind speed
1709	IF ( bc_uv_b == 'dirichlet' ) THEN
1710	ibc_uv_b = 0
1711	ELSEIF ( bc_uv_b == 'neumann' ) THEN
1712	ibc_uv_b = 1
1713	IF ( prandtl_layer ) THEN
1714	message_string = 'boundary condition: bc_uv_b = "' // &
1715	TRIM( bc_uv_b ) // '" is not allowed with prandtl_layer = .TRUE.'
1716	CALL message( 'check_parameters', 'PA0075', 1, 2, 0, 6, 0 )
1717	ENDIF
1718	ELSE
1719	message_string = 'unknown boundary condition: bc_uv_b = "' // &
1720	TRIM( bc_uv_b ) // '"'
1721	CALL message( 'check_parameters', 'PA0076', 1, 2, 0, 6, 0 )
1722	ENDIF
1723	!
1724	!-- In case of coupled simulations u and v at the ground in atmosphere will be
1725	!-- assigned with the u and v values of the ocean surface
1726	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
1727	ibc_uv_b = 2
1728	ENDIF
1729
1730	IF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
1731	bc_uv_t = 'neumann'
1732	ibc_uv_t = 1
1733	ELSE
1734	IF ( bc_uv_t == 'dirichlet' .OR. bc_uv_t == 'dirichlet_0' ) THEN
1735	ibc_uv_t = 0
1736	IF ( bc_uv_t == 'dirichlet_0' ) THEN
1737	!
1738	!-- Velocities for the initial u,v-profiles are set zero at the top
1739	!-- in case of dirichlet_0 conditions
1740	u_init(nzt+1) = 0.0
1741	v_init(nzt+1) = 0.0
1742	ENDIF
1743	ELSEIF ( bc_uv_t == 'neumann' ) THEN
1744	ibc_uv_t = 1
1745	ELSE
1746	message_string = 'unknown boundary condition: bc_uv_t = "' // &
1747	TRIM( bc_uv_t ) // '"'
1748	CALL message( 'check_parameters', 'PA0077', 1, 2, 0, 6, 0 )
1749	ENDIF
1750	ENDIF
1751
1752	!
1753	!-- Compute and check, respectively, the Rayleigh Damping parameter
1754	IF ( rayleigh_damping_factor == -1.0 ) THEN
1755	rayleigh_damping_factor = 0.0
1756	ELSE
1757	IF ( rayleigh_damping_factor < 0.0 .OR. rayleigh_damping_factor > 1.0 ) &
1758	THEN
1759	WRITE( message_string, * ) 'rayleigh_damping_factor = ', &
1760	rayleigh_damping_factor, ' out of range [0.0,1.0]'
1761	CALL message( 'check_parameters', 'PA0078', 1, 2, 0, 6, 0 )
1762	ENDIF
1763	ENDIF
1764
1765	IF ( rayleigh_damping_height == -1.0 ) THEN
1766	IF ( .NOT. ocean ) THEN
1767	rayleigh_damping_height = 0.66666666666 * zu(nzt)
1768	ELSE
1769	rayleigh_damping_height = 0.66666666666 * zu(nzb)
1770	ENDIF
1771	ELSE
1772	IF ( .NOT. ocean ) THEN
1773	IF ( rayleigh_damping_height < 0.0 .OR. &
1774	rayleigh_damping_height > zu(nzt) ) THEN
1775	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
1776	rayleigh_damping_height, ' out of range [0.0,', zu(nzt), ']'
1777	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
1778	ENDIF
1779	ELSE
1780	IF ( rayleigh_damping_height > 0.0 .OR. &
1781	rayleigh_damping_height < zu(nzb) ) THEN
1782	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
1783	rayleigh_damping_height, ' out of range [0.0,', zu(nzb), ']'
1784	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
1785	ENDIF
1786	ENDIF
1787	ENDIF
1788
1789	!
1790	!-- Check number of chosen statistic regions. More than 10 regions are not
1791	!-- allowed, because so far no more than 10 corresponding output files can
1792	!-- be opened (cf. check_open)
1793	IF ( statistic_regions > 9 .OR. statistic_regions < 0 ) THEN
1794	WRITE ( message_string, * ) 'number of statistic_regions = ', &
1795	statistic_regions+1, ' but only 10 regions are allowed'
1796	CALL message( 'check_parameters', 'PA0082', 1, 2, 0, 6, 0 )
1797	ENDIF
1798	IF ( normalizing_region > statistic_regions .OR. &
1799	normalizing_region < 0) THEN
1800	WRITE ( message_string, * ) 'normalizing_region = ', &
1801	normalizing_region, ' must be >= 0 and <= ',statistic_regions, &
1802	' (value of statistic_regions)'
1803	CALL message( 'check_parameters', 'PA0083', 1, 2, 0, 6, 0 )
1804	ENDIF
1805
1806	!
1807	!-- Check the interval for sorting particles.
1808	!-- Using particles as cloud droplets requires sorting after each timestep.
1809	IF ( dt_sort_particles /= 0.0 .AND. cloud_droplets ) THEN
1810	dt_sort_particles = 0.0
1811	message_string = 'dt_sort_particles is reset to 0.0 because of cloud' //&
1812	'_droplets = .TRUE.'
1813	CALL message( 'check_parameters', 'PA0084', 0, 1, 0, 6, 0 )
1814	ENDIF
1815
1816	!
1817	!-- Set the default intervals for data output, if necessary
1818	!-- NOTE: dt_dosp has already been set in package_parin
1819	IF ( dt_data_output /= 9999999.9_wp ) THEN
1820	IF ( dt_dopr == 9999999.9_wp ) dt_dopr = dt_data_output
1821	IF ( dt_dopts == 9999999.9_wp ) dt_dopts = dt_data_output
1822	IF ( dt_do2d_xy == 9999999.9_wp ) dt_do2d_xy = dt_data_output
1823	IF ( dt_do2d_xz == 9999999.9_wp ) dt_do2d_xz = dt_data_output
1824	IF ( dt_do2d_yz == 9999999.9_wp ) dt_do2d_yz = dt_data_output
1825	IF ( dt_do3d == 9999999.9_wp ) dt_do3d = dt_data_output
1826	IF ( dt_data_output_av == 9999999.9_wp ) dt_data_output_av = dt_data_output
1827	DO mid = 1, max_masks
1828	IF ( dt_domask(mid) == 9999999.9_wp ) dt_domask(mid) = dt_data_output
1829	ENDDO
1830	ENDIF
1831
1832	!
1833	!-- Set the default skip time intervals for data output, if necessary
1834	IF ( skip_time_dopr == 9999999.9_wp ) &
1835	skip_time_dopr = skip_time_data_output
1836	IF ( skip_time_dosp == 9999999.9_wp ) &
1837	skip_time_dosp = skip_time_data_output
1838	IF ( skip_time_do2d_xy == 9999999.9_wp ) &
1839	skip_time_do2d_xy = skip_time_data_output
1840	IF ( skip_time_do2d_xz == 9999999.9_wp ) &
1841	skip_time_do2d_xz = skip_time_data_output
1842	IF ( skip_time_do2d_yz == 9999999.9_wp ) &
1843	skip_time_do2d_yz = skip_time_data_output
1844	IF ( skip_time_do3d == 9999999.9_wp ) &
1845	skip_time_do3d = skip_time_data_output
1846	IF ( skip_time_data_output_av == 9999999.9_wp ) &
1847	skip_time_data_output_av = skip_time_data_output
1848	DO mid = 1, max_masks
1849	IF ( skip_time_domask(mid) == 9999999.9_wp ) &
1850	skip_time_domask(mid) = skip_time_data_output
1851	ENDDO
1852
1853	!
1854	!-- Check the average intervals (first for 3d-data, then for profiles and
1855	!-- spectra)
1856	IF ( averaging_interval > dt_data_output_av ) THEN
1857	WRITE( message_string, * ) 'averaging_interval = ', &
1858	averaging_interval, ' must be <= dt_data_output = ', dt_data_output
1859	CALL message( 'check_parameters', 'PA0085', 1, 2, 0, 6, 0 )
1860	ENDIF
1861
1862	IF ( averaging_interval_pr == 9999999.9_wp ) THEN
1863	averaging_interval_pr = averaging_interval
1864	ENDIF
1865
1866	IF ( averaging_interval_pr > dt_dopr ) THEN
1867	WRITE( message_string, * ) 'averaging_interval_pr = ', &
1868	averaging_interval_pr, ' must be <= dt_dopr = ', dt_dopr
1869	CALL message( 'check_parameters', 'PA0086', 1, 2, 0, 6, 0 )
1870	ENDIF
1871
1872	IF ( averaging_interval_sp == 9999999.9_wp ) THEN
1873	averaging_interval_sp = averaging_interval
1874	ENDIF
1875
1876	IF ( averaging_interval_sp > dt_dosp ) THEN
1877	WRITE( message_string, * ) 'averaging_interval_sp = ', &
1878	averaging_interval_sp, ' must be <= dt_dosp = ', dt_dosp
1879	CALL message( 'check_parameters', 'PA0087', 1, 2, 0, 6, 0 )
1880	ENDIF
1881
1882	!
1883	!-- Set the default interval for profiles entering the temporal average
1884	IF ( dt_averaging_input_pr == 9999999.9_wp ) THEN
1885	dt_averaging_input_pr = dt_averaging_input
1886	ENDIF
1887
1888	!
1889	!-- Set the default interval for the output of timeseries to a reasonable
1890	!-- value (tries to minimize the number of calls of flow_statistics)
1891	IF ( dt_dots == 9999999.9_wp ) THEN
1892	IF ( averaging_interval_pr == 0.0 ) THEN
1893	dt_dots = MIN( dt_run_control, dt_dopr )
1894	ELSE
1895	dt_dots = MIN( dt_run_control, dt_averaging_input_pr )
1896	ENDIF
1897	ENDIF
1898
1899	!
1900	!-- Check the sample rate for averaging (first for 3d-data, then for profiles)
1901	IF ( dt_averaging_input > averaging_interval ) THEN
1902	WRITE( message_string, * ) 'dt_averaging_input = ', &
1903	dt_averaging_input, ' must be <= averaging_interval = ', &
1904	averaging_interval
1905	CALL message( 'check_parameters', 'PA0088', 1, 2, 0, 6, 0 )
1906	ENDIF
1907
1908	IF ( dt_averaging_input_pr > averaging_interval_pr ) THEN
1909	WRITE( message_string, * ) 'dt_averaging_input_pr = ', &
1910	dt_averaging_input_pr, ' must be <= averaging_interval_pr = ', &
1911	averaging_interval_pr
1912	CALL message( 'check_parameters', 'PA0089', 1, 2, 0, 6, 0 )
1913	ENDIF
1914
1915	!
1916	!-- Set the default value for the integration interval of precipitation amount
1917	IF ( precipitation ) THEN
1918	IF ( precipitation_amount_interval == 9999999.9_wp ) THEN
1919	precipitation_amount_interval = dt_do2d_xy
1920	ELSE
1921	IF ( precipitation_amount_interval > dt_do2d_xy ) THEN
1922	WRITE( message_string, * ) 'precipitation_amount_interval = ', &
1923	precipitation_amount_interval, ' must not be larger than ', &
1924	'dt_do2d_xy = ', dt_do2d_xy
1925	CALL message( 'check_parameters', 'PA0090', 1, 2, 0, 6, 0 )
1926	ENDIF
1927	ENDIF
1928	ENDIF
1929
1930	!
1931	!-- Determine the number of output profiles and check whether they are
1932	!-- permissible
1933	DO WHILE ( data_output_pr(dopr_n+1) /= ' ' )
1934
1935	dopr_n = dopr_n + 1
1936	i = dopr_n
1937
1938	!
1939	!-- Determine internal profile number (for hom, homs)
1940	!-- and store height levels
1941	SELECT CASE ( TRIM( data_output_pr(i) ) )
1942
1943	CASE ( 'u', '#u' )
1944	dopr_index(i) = 1
1945	dopr_unit(i) = 'm/s'
1946	hom(:,2,1,:) = SPREAD( zu, 2, statistic_regions+1 )
1947	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1948	dopr_initial_index(i) = 5
1949	hom(:,2,5,:) = SPREAD( zu, 2, statistic_regions+1 )
1950	data_output_pr(i) = data_output_pr(i)(2:)
1951	ENDIF
1952
1953	CASE ( 'v', '#v' )
1954	dopr_index(i) = 2
1955	dopr_unit(i) = 'm/s'
1956	hom(:,2,2,:) = SPREAD( zu, 2, statistic_regions+1 )
1957	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1958	dopr_initial_index(i) = 6
1959	hom(:,2,6,:) = SPREAD( zu, 2, statistic_regions+1 )
1960	data_output_pr(i) = data_output_pr(i)(2:)
1961	ENDIF
1962
1963	CASE ( 'w' )
1964	dopr_index(i) = 3
1965	dopr_unit(i) = 'm/s'
1966	hom(:,2,3,:) = SPREAD( zw, 2, statistic_regions+1 )
1967
1968	CASE ( 'pt', '#pt' )
1969	IF ( .NOT. cloud_physics ) THEN
1970	dopr_index(i) = 4
1971	dopr_unit(i) = 'K'
1972	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
1973	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1974	dopr_initial_index(i) = 7
1975	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
1976	hom(nzb,2,7,:) = 0.0 ! because zu(nzb) is negative
1977	data_output_pr(i) = data_output_pr(i)(2:)
1978	ENDIF
1979	ELSE
1980	dopr_index(i) = 43
1981	dopr_unit(i) = 'K'
1982	hom(:,2,43,:) = SPREAD( zu, 2, statistic_regions+1 )
1983	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1984	dopr_initial_index(i) = 28
1985	hom(:,2,28,:) = SPREAD( zu, 2, statistic_regions+1 )
1986	hom(nzb,2,28,:) = 0.0 ! because zu(nzb) is negative
1987	data_output_pr(i) = data_output_pr(i)(2:)
1988	ENDIF
1989	ENDIF
1990
1991	CASE ( 'e' )
1992	dopr_index(i) = 8
1993	dopr_unit(i) = 'm2/s2'
1994	hom(:,2,8,:) = SPREAD( zu, 2, statistic_regions+1 )
1995	hom(nzb,2,8,:) = 0.0
1996
1997	CASE ( 'km', '#km' )
1998	dopr_index(i) = 9
1999	dopr_unit(i) = 'm2/s'
2000	hom(:,2,9,:) = SPREAD( zu, 2, statistic_regions+1 )
2001	hom(nzb,2,9,:) = 0.0
2002	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2003	dopr_initial_index(i) = 23
2004	hom(:,2,23,:) = hom(:,2,9,:)
2005	data_output_pr(i) = data_output_pr(i)(2:)
2006	ENDIF
2007
2008	CASE ( 'kh', '#kh' )
2009	dopr_index(i) = 10
2010	dopr_unit(i) = 'm2/s'
2011	hom(:,2,10,:) = SPREAD( zu, 2, statistic_regions+1 )
2012	hom(nzb,2,10,:) = 0.0
2013	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2014	dopr_initial_index(i) = 24
2015	hom(:,2,24,:) = hom(:,2,10,:)
2016	data_output_pr(i) = data_output_pr(i)(2:)
2017	ENDIF
2018
2019	CASE ( 'l', '#l' )
2020	dopr_index(i) = 11
2021	dopr_unit(i) = 'm'
2022	hom(:,2,11,:) = SPREAD( zu, 2, statistic_regions+1 )
2023	hom(nzb,2,11,:) = 0.0
2024	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2025	dopr_initial_index(i) = 25
2026	hom(:,2,25,:) = hom(:,2,11,:)
2027	data_output_pr(i) = data_output_pr(i)(2:)
2028	ENDIF
2029
2030	CASE ( 'w"u"' )
2031	dopr_index(i) = 12
2032	dopr_unit(i) = 'm2/s2'
2033	hom(:,2,12,:) = SPREAD( zw, 2, statistic_regions+1 )
2034	IF ( prandtl_layer ) hom(nzb,2,12,:) = zu(1)
2035
2036	CASE ( 'wu' )
2037	dopr_index(i) = 13
2038	dopr_unit(i) = 'm2/s2'
2039	hom(:,2,13,:) = SPREAD( zw, 2, statistic_regions+1 )
2040
2041	CASE ( 'w"v"' )
2042	dopr_index(i) = 14
2043	dopr_unit(i) = 'm2/s2'
2044	hom(:,2,14,:) = SPREAD( zw, 2, statistic_regions+1 )
2045	IF ( prandtl_layer ) hom(nzb,2,14,:) = zu(1)
2046
2047	CASE ( 'wv' )
2048	dopr_index(i) = 15
2049	dopr_unit(i) = 'm2/s2'
2050	hom(:,2,15,:) = SPREAD( zw, 2, statistic_regions+1 )
2051
2052	CASE ( 'w"pt"' )
2053	dopr_index(i) = 16
2054	dopr_unit(i) = 'K m/s'
2055	hom(:,2,16,:) = SPREAD( zw, 2, statistic_regions+1 )
2056
2057	CASE ( 'wpt' )
2058	dopr_index(i) = 17
2059	dopr_unit(i) = 'K m/s'
2060	hom(:,2,17,:) = SPREAD( zw, 2, statistic_regions+1 )
2061
2062	CASE ( 'wpt' )
2063	dopr_index(i) = 18
2064	dopr_unit(i) = 'K m/s'
2065	hom(:,2,18,:) = SPREAD( zw, 2, statistic_regions+1 )
2066
2067	CASE ( 'wu' )
2068	dopr_index(i) = 19
2069	dopr_unit(i) = 'm2/s2'
2070	hom(:,2,19,:) = SPREAD( zw, 2, statistic_regions+1 )
2071	IF ( prandtl_layer ) hom(nzb,2,19,:) = zu(1)
2072
2073	CASE ( 'wv' )
2074	dopr_index(i) = 20
2075	dopr_unit(i) = 'm2/s2'
2076	hom(:,2,20,:) = SPREAD( zw, 2, statistic_regions+1 )
2077	IF ( prandtl_layer ) hom(nzb,2,20,:) = zu(1)
2078
2079	CASE ( 'wptBC' )
2080	dopr_index(i) = 21
2081	dopr_unit(i) = 'K m/s'
2082	hom(:,2,21,:) = SPREAD( zw, 2, statistic_regions+1 )
2083
2084	CASE ( 'wptBC' )
2085	dopr_index(i) = 22
2086	dopr_unit(i) = 'K m/s'
2087	hom(:,2,22,:) = SPREAD( zw, 2, statistic_regions+1 )
2088
2089	CASE ( 'sa', '#sa' )
2090	IF ( .NOT. ocean ) THEN
2091	message_string = 'data_output_pr = ' // &
2092	TRIM( data_output_pr(i) ) // ' is not imp' // &
2093	'lemented for ocean = .FALSE.'
2094	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2095	ELSE
2096	dopr_index(i) = 23
2097	dopr_unit(i) = 'psu'
2098	hom(:,2,23,:) = SPREAD( zu, 2, statistic_regions+1 )
2099	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2100	dopr_initial_index(i) = 26
2101	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2102	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
2103	data_output_pr(i) = data_output_pr(i)(2:)
2104	ENDIF
2105	ENDIF
2106
2107	CASE ( 'u*2' )
2108	dopr_index(i) = 30
2109	dopr_unit(i) = 'm2/s2'
2110	hom(:,2,30,:) = SPREAD( zu, 2, statistic_regions+1 )
2111
2112	CASE ( 'v*2' )
2113	dopr_index(i) = 31
2114	dopr_unit(i) = 'm2/s2'
2115	hom(:,2,31,:) = SPREAD( zu, 2, statistic_regions+1 )
2116
2117	CASE ( 'w*2' )
2118	dopr_index(i) = 32
2119	dopr_unit(i) = 'm2/s2'
2120	hom(:,2,32,:) = SPREAD( zw, 2, statistic_regions+1 )
2121
2122	CASE ( 'pt*2' )
2123	dopr_index(i) = 33
2124	dopr_unit(i) = 'K2'
2125	hom(:,2,33,:) = SPREAD( zu, 2, statistic_regions+1 )
2126
2127	CASE ( 'e*' )
2128	dopr_index(i) = 34
2129	dopr_unit(i) = 'm2/s2'
2130	hom(:,2,34,:) = SPREAD( zu, 2, statistic_regions+1 )
2131
2132	CASE ( 'w2pt' )
2133	dopr_index(i) = 35
2134	dopr_unit(i) = 'K m2/s2'
2135	hom(:,2,35,:) = SPREAD( zw, 2, statistic_regions+1 )
2136
2137	CASE ( 'wpt2' )
2138	dopr_index(i) = 36
2139	dopr_unit(i) = 'K2 m/s'
2140	hom(:,2,36,:) = SPREAD( zw, 2, statistic_regions+1 )
2141
2142	CASE ( 'we' )
2143	dopr_index(i) = 37
2144	dopr_unit(i) = 'm3/s3'
2145	hom(:,2,37,:) = SPREAD( zw, 2, statistic_regions+1 )
2146
2147	CASE ( 'w*3' )
2148	dopr_index(i) = 38
2149	dopr_unit(i) = 'm3/s3'
2150	hom(:,2,38,:) = SPREAD( zw, 2, statistic_regions+1 )
2151
2152	CASE ( 'Sw' )
2153	dopr_index(i) = 39
2154	dopr_unit(i) = 'none'
2155	hom(:,2,39,:) = SPREAD( zw, 2, statistic_regions+1 )
2156
2157	CASE ( 'p' )
2158	dopr_index(i) = 40
2159	dopr_unit(i) = 'Pa'
2160	hom(:,2,40,:) = SPREAD( zu, 2, statistic_regions+1 )
2161
2162	CASE ( 'q', '#q' )
2163	IF ( .NOT. humidity ) THEN
2164	message_string = 'data_output_pr = ' // &
2165	TRIM( data_output_pr(i) ) // ' is not imp' // &
2166	'lemented for humidity = .FALSE.'
2167	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2168	ELSE
2169	dopr_index(i) = 41
2170	dopr_unit(i) = 'kg/kg'
2171	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
2172	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2173	dopr_initial_index(i) = 26
2174	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2175	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
2176	data_output_pr(i) = data_output_pr(i)(2:)
2177	ENDIF
2178	ENDIF
2179
2180	CASE ( 's', '#s' )
2181	IF ( .NOT. passive_scalar ) THEN
2182	message_string = 'data_output_pr = ' // &
2183	TRIM( data_output_pr(i) ) // ' is not imp' // &
2184	'lemented for passive_scalar = .FALSE.'
2185	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2186	ELSE
2187	dopr_index(i) = 41
2188	dopr_unit(i) = 'kg/m3'
2189	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
2190	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2191	dopr_initial_index(i) = 26
2192	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2193	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
2194	data_output_pr(i) = data_output_pr(i)(2:)
2195	ENDIF
2196	ENDIF
2197
2198	CASE ( 'qv', '#qv' )
2199	IF ( .NOT. cloud_physics ) THEN
2200	dopr_index(i) = 41
2201	dopr_unit(i) = 'kg/kg'
2202	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
2203	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2204	dopr_initial_index(i) = 26
2205	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2206	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
2207	data_output_pr(i) = data_output_pr(i)(2:)
2208	ENDIF
2209	ELSE
2210	dopr_index(i) = 42
2211	dopr_unit(i) = 'kg/kg'
2212	hom(:,2,42,:) = SPREAD( zu, 2, statistic_regions+1 )
2213	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2214	dopr_initial_index(i) = 27
2215	hom(:,2,27,:) = SPREAD( zu, 2, statistic_regions+1 )
2216	hom(nzb,2,27,:) = 0.0 ! weil zu(nzb) negativ ist
2217	data_output_pr(i) = data_output_pr(i)(2:)
2218	ENDIF
2219	ENDIF
2220
2221	CASE ( 'lpt', '#lpt' )
2222	IF ( .NOT. cloud_physics ) THEN
2223	message_string = 'data_output_pr = ' // &
2224	TRIM( data_output_pr(i) ) // ' is not imp' // &
2225	'lemented for cloud_physics = .FALSE.'
2226	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2227	ELSE
2228	dopr_index(i) = 4
2229	dopr_unit(i) = 'K'
2230	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
2231	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2232	dopr_initial_index(i) = 7
2233	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
2234	hom(nzb,2,7,:) = 0.0 ! weil zu(nzb) negativ ist
2235	data_output_pr(i) = data_output_pr(i)(2:)
2236	ENDIF
2237	ENDIF
2238
2239	CASE ( 'vpt', '#vpt' )
2240	dopr_index(i) = 44
2241	dopr_unit(i) = 'K'
2242	hom(:,2,44,:) = SPREAD( zu, 2, statistic_regions+1 )
2243	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2244	dopr_initial_index(i) = 29
2245	hom(:,2,29,:) = SPREAD( zu, 2, statistic_regions+1 )
2246	hom(nzb,2,29,:) = 0.0 ! weil zu(nzb) negativ ist
2247	data_output_pr(i) = data_output_pr(i)(2:)
2248	ENDIF
2249
2250	CASE ( 'w"vpt"' )
2251	dopr_index(i) = 45
2252	dopr_unit(i) = 'K m/s'
2253	hom(:,2,45,:) = SPREAD( zw, 2, statistic_regions+1 )
2254
2255	CASE ( 'wvpt' )
2256	dopr_index(i) = 46
2257	dopr_unit(i) = 'K m/s'
2258	hom(:,2,46,:) = SPREAD( zw, 2, statistic_regions+1 )
2259
2260	CASE ( 'wvpt' )
2261	dopr_index(i) = 47
2262	dopr_unit(i) = 'K m/s'
2263	hom(:,2,47,:) = SPREAD( zw, 2, statistic_regions+1 )
2264
2265	CASE ( 'w"q"' )
2266	IF ( .NOT. humidity ) THEN
2267	message_string = 'data_output_pr = ' // &
2268	TRIM( data_output_pr(i) ) // ' is not imp' // &
2269	'lemented for humidity = .FALSE.'
2270	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2271	ELSE
2272	dopr_index(i) = 48
2273	dopr_unit(i) = 'kg/kg m/s'
2274	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2275	ENDIF
2276
2277	CASE ( 'wq' )
2278	IF ( .NOT. humidity ) THEN
2279	message_string = 'data_output_pr = ' // &
2280	TRIM( data_output_pr(i) ) // ' is not imp' // &
2281	'lemented for humidity = .FALSE.'
2282	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2283	ELSE
2284	dopr_index(i) = 49
2285	dopr_unit(i) = 'kg/kg m/s'
2286	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2287	ENDIF
2288
2289	CASE ( 'wq' )
2290	IF ( .NOT. humidity ) THEN
2291	message_string = 'data_output_pr = ' // &
2292	TRIM( data_output_pr(i) ) // ' is not imp' // &
2293	'lemented for humidity = .FALSE.'
2294	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2295	ELSE
2296	dopr_index(i) = 50
2297	dopr_unit(i) = 'kg/kg m/s'
2298	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2299	ENDIF
2300
2301	CASE ( 'w"s"' )
2302	IF ( .NOT. passive_scalar ) THEN
2303	message_string = 'data_output_pr = ' // &
2304	TRIM( data_output_pr(i) ) // ' is not imp' // &
2305	'lemented for passive_scalar = .FALSE.'
2306	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2307	ELSE
2308	dopr_index(i) = 48
2309	dopr_unit(i) = 'kg/m3 m/s'
2310	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2311	ENDIF
2312
2313	CASE ( 'ws' )
2314	IF ( .NOT. passive_scalar ) THEN
2315	message_string = 'data_output_pr = ' // &
2316	TRIM( data_output_pr(i) ) // ' is not imp' // &
2317	'lemented for passive_scalar = .FALSE.'
2318	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2319	ELSE
2320	dopr_index(i) = 49
2321	dopr_unit(i) = 'kg/m3 m/s'
2322	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2323	ENDIF
2324
2325	CASE ( 'ws' )
2326	IF ( .NOT. passive_scalar ) THEN
2327	message_string = 'data_output_pr = ' // &
2328	TRIM( data_output_pr(i) ) // ' is not imp' // &
2329	'lemented for passive_scalar = .FALSE.'
2330	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2331	ELSE
2332	dopr_index(i) = 50
2333	dopr_unit(i) = 'kg/m3 m/s'
2334	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2335	ENDIF
2336
2337	CASE ( 'w"qv"' )
2338	IF ( humidity .AND. .NOT. cloud_physics ) &
2339	THEN
2340	dopr_index(i) = 48
2341	dopr_unit(i) = 'kg/kg m/s'
2342	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2343	ELSEIF( humidity .AND. cloud_physics ) THEN
2344	dopr_index(i) = 51
2345	dopr_unit(i) = 'kg/kg m/s'
2346	hom(:,2,51,:) = SPREAD( zw, 2, statistic_regions+1 )
2347	ELSE
2348	message_string = 'data_output_pr = ' // &
2349	TRIM( data_output_pr(i) ) // ' is not imp' // &
2350	'lemented for cloud_physics = .FALSE. an&' // &
2351	'd humidity = .FALSE.'
2352	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2353	ENDIF
2354
2355	CASE ( 'wqv' )
2356	IF ( humidity .AND. .NOT. cloud_physics ) &
2357	THEN
2358	dopr_index(i) = 49
2359	dopr_unit(i) = 'kg/kg m/s'
2360	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2361	ELSEIF( humidity .AND. cloud_physics ) THEN
2362	dopr_index(i) = 52
2363	dopr_unit(i) = 'kg/kg m/s'
2364	hom(:,2,52,:) = SPREAD( zw, 2, statistic_regions+1 )
2365	ELSE
2366	message_string = 'data_output_pr = ' // &
2367	TRIM( data_output_pr(i) ) // ' is not imp' // &
2368	'lemented for cloud_physics = .FALSE. an&' // &
2369	'd humidity = .FALSE.'
2370	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2371	ENDIF
2372
2373	CASE ( 'wqv' )
2374	IF ( humidity .AND. .NOT. cloud_physics ) &
2375	THEN
2376	dopr_index(i) = 50
2377	dopr_unit(i) = 'kg/kg m/s'
2378	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2379	ELSEIF( humidity .AND. cloud_physics ) THEN
2380	dopr_index(i) = 53
2381	dopr_unit(i) = 'kg/kg m/s'
2382	hom(:,2,53,:) = SPREAD( zw, 2, statistic_regions+1 )
2383	ELSE
2384	message_string = 'data_output_pr = ' // &
2385	TRIM( data_output_pr(i) ) // ' is not imp' // &
2386	'lemented for cloud_physics = .FALSE. an&' // &
2387	'd humidity = .FALSE.'
2388	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2389	ENDIF
2390
2391	CASE ( 'ql' )
2392	IF ( .NOT. cloud_physics .AND. .NOT. cloud_droplets ) THEN
2393	message_string = 'data_output_pr = ' // &
2394	TRIM( data_output_pr(i) ) // ' is not imp' // &
2395	'lemented for cloud_physics = .FALSE. or' // &
2396	'&cloud_droplets = .FALSE.'
2397	CALL message( 'check_parameters', 'PA0096', 1, 2, 0, 6, 0 )
2398	ELSE
2399	dopr_index(i) = 54
2400	dopr_unit(i) = 'kg/kg'
2401	hom(:,2,54,:) = SPREAD( zu, 2, statistic_regions+1 )
2402	ENDIF
2403
2404	CASE ( 'wuu*:dz' )
2405	dopr_index(i) = 55
2406	dopr_unit(i) = 'm2/s3'
2407	hom(:,2,55,:) = SPREAD( zu, 2, statistic_regions+1 )
2408
2409	CASE ( 'wp:dz' )
2410	dopr_index(i) = 56
2411	dopr_unit(i) = 'm2/s3'
2412	hom(:,2,56,:) = SPREAD( zw, 2, statistic_regions+1 )
2413
2414	CASE ( 'w"e:dz' )
2415	dopr_index(i) = 57
2416	dopr_unit(i) = 'm2/s3'
2417	hom(:,2,57,:) = SPREAD( zu, 2, statistic_regions+1 )
2418
2419
2420	CASE ( 'u"pt"' )
2421	dopr_index(i) = 58
2422	dopr_unit(i) = 'K m/s'
2423	hom(:,2,58,:) = SPREAD( zu, 2, statistic_regions+1 )
2424
2425	CASE ( 'upt' )
2426	dopr_index(i) = 59
2427	dopr_unit(i) = 'K m/s'
2428	hom(:,2,59,:) = SPREAD( zu, 2, statistic_regions+1 )
2429
2430	CASE ( 'upt_t' )
2431	dopr_index(i) = 60
2432	dopr_unit(i) = 'K m/s'
2433	hom(:,2,60,:) = SPREAD( zu, 2, statistic_regions+1 )
2434
2435	CASE ( 'v"pt"' )
2436	dopr_index(i) = 61
2437	dopr_unit(i) = 'K m/s'
2438	hom(:,2,61,:) = SPREAD( zu, 2, statistic_regions+1 )
2439
2440	CASE ( 'vpt' )
2441	dopr_index(i) = 62
2442	dopr_unit(i) = 'K m/s'
2443	hom(:,2,62,:) = SPREAD( zu, 2, statistic_regions+1 )
2444
2445	CASE ( 'vpt_t' )
2446	dopr_index(i) = 63
2447	dopr_unit(i) = 'K m/s'
2448	hom(:,2,63,:) = SPREAD( zu, 2, statistic_regions+1 )
2449
2450	CASE ( 'rho' )
2451	IF ( .NOT. ocean ) THEN
2452	message_string = 'data_output_pr = ' // &
2453	TRIM( data_output_pr(i) ) // ' is not imp' // &
2454	'lemented for ocean = .FALSE.'
2455	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2456	ELSE
2457	dopr_index(i) = 64
2458	dopr_unit(i) = 'kg/m3'
2459	hom(:,2,64,:) = SPREAD( zu, 2, statistic_regions+1 )
2460	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2461	dopr_initial_index(i) = 77
2462	hom(:,2,77,:) = SPREAD( zu, 2, statistic_regions+1 )
2463	hom(nzb,2,77,:) = 0.0 ! because zu(nzb) is negative
2464	data_output_pr(i) = data_output_pr(i)(2:)
2465	ENDIF
2466	ENDIF
2467
2468	CASE ( 'w"sa"' )
2469	IF ( .NOT. ocean ) THEN
2470	message_string = 'data_output_pr = ' // &
2471	TRIM( data_output_pr(i) ) // ' is not imp' // &
2472	'lemented for ocean = .FALSE.'
2473	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2474	ELSE
2475	dopr_index(i) = 65
2476	dopr_unit(i) = 'psu m/s'
2477	hom(:,2,65,:) = SPREAD( zw, 2, statistic_regions+1 )
2478	ENDIF
2479
2480	CASE ( 'wsa' )
2481	IF ( .NOT. ocean ) THEN
2482	message_string = 'data_output_pr = ' // &
2483	TRIM( data_output_pr(i) ) // ' is not imp' // &
2484	'lemented for ocean = .FALSE.'
2485	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2486	ELSE
2487	dopr_index(i) = 66
2488	dopr_unit(i) = 'psu m/s'
2489	hom(:,2,66,:) = SPREAD( zw, 2, statistic_regions+1 )
2490	ENDIF
2491
2492	CASE ( 'wsa' )
2493	IF ( .NOT. ocean ) THEN
2494	message_string = 'data_output_pr = ' // &
2495	TRIM( data_output_pr(i) ) // ' is not imp' // &
2496	'lemented for ocean = .FALSE.'
2497	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2498	ELSE
2499	dopr_index(i) = 67
2500	dopr_unit(i) = 'psu m/s'
2501	hom(:,2,67,:) = SPREAD( zw, 2, statistic_regions+1 )
2502	ENDIF
2503
2504	CASE ( 'wp' )
2505	dopr_index(i) = 68
2506	dopr_unit(i) = 'm3/s3'
2507	hom(:,2,68,:) = SPREAD( zu, 2, statistic_regions+1 )
2508
2509	CASE ( 'w"e' )
2510	dopr_index(i) = 69
2511	dopr_unit(i) = 'm3/s3'
2512	hom(:,2,69,:) = SPREAD( zu, 2, statistic_regions+1 )
2513
2514	CASE ( 'q*2' )
2515	IF ( .NOT. humidity ) THEN
2516	message_string = 'data_output_pr = ' // &
2517	TRIM( data_output_pr(i) ) // ' is not imp' // &
2518	'lemented for humidity = .FALSE.'
2519	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2520	ELSE
2521	dopr_index(i) = 70
2522	dopr_unit(i) = 'kg2/kg2'
2523	hom(:,2,70,:) = SPREAD( zu, 2, statistic_regions+1 )
2524	ENDIF
2525
2526	CASE ( 'prho' )
2527	IF ( .NOT. ocean ) THEN
2528	message_string = 'data_output_pr = ' // &
2529	TRIM( data_output_pr(i) ) // ' is not imp' // &
2530	'lemented for ocean = .FALSE.'
2531	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2532	ELSE
2533	dopr_index(i) = 71
2534	dopr_unit(i) = 'kg/m3'
2535	hom(:,2,71,:) = SPREAD( zu, 2, statistic_regions+1 )
2536	ENDIF
2537
2538	CASE ( 'hyp' )
2539	dopr_index(i) = 72
2540	dopr_unit(i) = 'dbar'
2541	hom(:,2,72,:) = SPREAD( zu, 2, statistic_regions+1 )
2542
2543	CASE ( 'nr' )
2544	IF ( .NOT. cloud_physics ) THEN
2545	message_string = 'data_output_pr = ' // &
2546	TRIM( data_output_pr(i) ) // ' is not imp' // &
2547	'lemented for cloud_physics = .FALSE.'
2548	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2549	ELSEIF ( icloud_scheme /= 0 ) THEN
2550	message_string = 'data_output_pr = ' // &
2551	TRIM( data_output_pr(i) ) // ' is not imp' // &
2552	'lemented for cloud_scheme /= seifert_beheng'
2553	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
2554	ELSEIF ( .NOT. precipitation ) THEN
2555	message_string = 'data_output_pr = ' // &
2556	TRIM( data_output_pr(i) ) // ' is not imp' // &
2557	'lemented for precipitation = .FALSE.'
2558	CALL message( 'check_parameters', 'PA0361', 1, 2, 0, 6, 0 )
2559	ELSE
2560	dopr_index(i) = 73
2561	dopr_unit(i) = '1/m3'
2562	hom(:,2,73,:) = SPREAD( zu, 2, statistic_regions+1 )
2563	ENDIF
2564
2565	CASE ( 'qr' )
2566	IF ( .NOT. cloud_physics ) THEN
2567	message_string = 'data_output_pr = ' // &
2568	TRIM( data_output_pr(i) ) // ' is not imp' // &
2569	'lemented for cloud_physics = .FALSE.'
2570	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2571	ELSEIF ( icloud_scheme /= 0 ) THEN
2572	message_string = 'data_output_pr = ' // &
2573	TRIM( data_output_pr(i) ) // ' is not imp' // &
2574	'lemented for cloud_scheme /= seifert_beheng'
2575	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
2576	ELSEIF ( .NOT. precipitation ) THEN
2577	message_string = 'data_output_pr = ' // &
2578	TRIM( data_output_pr(i) ) // ' is not imp' // &
2579	'lemented for precipitation = .FALSE.'
2580	CALL message( 'check_parameters', 'PA0361', 1, 2, 0, 6, 0 )
2581	ELSE
2582	dopr_index(i) = 74
2583	dopr_unit(i) = 'kg/kg'
2584	hom(:,2,74,:) = SPREAD( zu, 2, statistic_regions+1 )
2585	ENDIF
2586
2587	CASE ( 'qc' )
2588	IF ( .NOT. cloud_physics ) THEN
2589	message_string = 'data_output_pr = ' // &
2590	TRIM( data_output_pr(i) ) // ' is not imp' // &
2591	'lemented for cloud_physics = .FALSE.'
2592	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2593	ELSEIF ( icloud_scheme /= 0 ) THEN
2594	message_string = 'data_output_pr = ' // &
2595	TRIM( data_output_pr(i) ) // ' is not imp' // &
2596	'lemented for cloud_scheme /= seifert_beheng'
2597	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
2598	ELSE
2599	dopr_index(i) = 75
2600	dopr_unit(i) = 'kg/kg'
2601	hom(:,2,75,:) = SPREAD( zu, 2, statistic_regions+1 )
2602	ENDIF
2603
2604	CASE ( 'prr' )
2605	IF ( .NOT. cloud_physics ) THEN
2606	message_string = 'data_output_pr = ' // &
2607	TRIM( data_output_pr(i) ) // ' is not imp' // &
2608	'lemented for cloud_physics = .FALSE.'
2609	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2610	ELSEIF ( icloud_scheme /= 0 ) THEN
2611	message_string = 'data_output_pr = ' // &
2612	TRIM( data_output_pr(i) ) // ' is not imp' // &
2613	'lemented for cloud_scheme /= seifert_beheng'
2614	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
2615	ELSEIF ( .NOT. precipitation ) THEN
2616	message_string = 'data_output_pr = ' // &
2617	TRIM( data_output_pr(i) ) // ' is not imp' // &
2618	'lemented for precipitation = .FALSE.'
2619	CALL message( 'check_parameters', 'PA0361', 1, 2, 0, 6, 0 )
2620
2621	ELSE
2622	dopr_index(i) = 76
2623	dopr_unit(i) = 'kg/kg m/s'
2624	hom(:,2,76,:) = SPREAD( zu, 2, statistic_regions+1 )
2625	ENDIF
2626
2627	CASE ( 'ug' )
2628	dopr_index(i) = 78
2629	dopr_unit(i) = 'm/s'
2630	hom(:,2,78,:) = SPREAD( zu, 2, statistic_regions+1 )
2631
2632	CASE ( 'vg' )
2633	dopr_index(i) = 79
2634	dopr_unit(i) = 'm/s'
2635	hom(:,2,79,:) = SPREAD( zu, 2, statistic_regions+1 )
2636
2637	CASE ( 'w_subs' )
2638	IF ( .NOT. large_scale_subsidence ) THEN
2639	message_string = 'data_output_pr = ' // &
2640	TRIM( data_output_pr(i) ) // ' is not imp' // &
2641	'lemented for large_scale_subsidence = .FALSE.'
2642	CALL message( 'check_parameters', 'PA0382', 1, 2, 0, 6, 0 )
2643	ELSE
2644	dopr_index(i) = 80
2645	dopr_unit(i) = 'm/s'
2646	hom(:,2,80,:) = SPREAD( zu, 2, statistic_regions+1 )
2647	ENDIF
2648
2649	CASE DEFAULT
2650
2651	CALL user_check_data_output_pr( data_output_pr(i), i, unit )
2652
2653	IF ( unit == 'illegal' ) THEN
2654	IF ( data_output_pr_user(1) /= ' ' ) THEN
2655	message_string = 'illegal value for data_output_pr or ' // &
2656	'data_output_pr_user = "' // &
2657	TRIM( data_output_pr(i) ) // '"'
2658	CALL message( 'check_parameters', 'PA0097', 1, 2, 0, 6, 0 )
2659	ELSE
2660	message_string = 'illegal value for data_output_pr = "' // &
2661	TRIM( data_output_pr(i) ) // '"'
2662	CALL message( 'check_parameters', 'PA0098', 1, 2, 0, 6, 0 )
2663	ENDIF
2664	ENDIF
2665
2666	END SELECT
2667
2668	ENDDO
2669
2670
2671	!
2672	!-- Append user-defined data output variables to the standard data output
2673	IF ( data_output_user(1) /= ' ' ) THEN
2674	i = 1
2675	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
2676	i = i + 1
2677	ENDDO
2678	j = 1
2679	DO WHILE ( data_output_user(j) /= ' ' .AND. j <= 100 )
2680	IF ( i > 100 ) THEN
2681	message_string = 'number of output quantitities given by data' // &
2682	'_output and data_output_user exceeds the limit of 100'
2683	CALL message( 'check_parameters', 'PA0102', 1, 2, 0, 6, 0 )
2684	ENDIF
2685	data_output(i) = data_output_user(j)
2686	i = i + 1
2687	j = j + 1
2688	ENDDO
2689	ENDIF
2690
2691	!
2692	!-- Check and set steering parameters for 2d/3d data output and averaging
2693	i = 1
2694	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
2695	!
2696	!-- Check for data averaging
2697	ilen = LEN_TRIM( data_output(i) )
2698	j = 0 ! no data averaging
2699	IF ( ilen > 3 ) THEN
2700	IF ( data_output(i)(ilen-2:ilen) == '_av' ) THEN
2701	j = 1 ! data averaging
2702	data_output(i) = data_output(i)(1:ilen-3)
2703	ENDIF
2704	ENDIF
2705	!
2706	!-- Check for cross section or volume data
2707	ilen = LEN_TRIM( data_output(i) )
2708	k = 0 ! 3d data
2709	var = data_output(i)(1:ilen)
2710	IF ( ilen > 3 ) THEN
2711	IF ( data_output(i)(ilen-2:ilen) == '_xy' .OR. &
2712	data_output(i)(ilen-2:ilen) == '_xz' .OR. &
2713	data_output(i)(ilen-2:ilen) == '_yz' ) THEN
2714	k = 1 ! 2d data
2715	var = data_output(i)(1:ilen-3)
2716	ENDIF
2717	ENDIF
2718	!
2719	!-- Check for allowed value and set units
2720	SELECT CASE ( TRIM( var ) )
2721
2722	CASE ( 'e' )
2723	IF ( constant_diffusion ) THEN
2724	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2725	'res constant_diffusion = .FALSE.'
2726	CALL message( 'check_parameters', 'PA0103', 1, 2, 0, 6, 0 )
2727	ENDIF
2728	unit = 'm2/s2'
2729
2730	CASE ( 'lpt' )
2731	IF ( .NOT. cloud_physics ) THEN
2732	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2733	'res cloud_physics = .TRUE.'
2734	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2735	ENDIF
2736	unit = 'K'
2737
2738	CASE ( 'nr' )
2739	IF ( .NOT. cloud_physics ) THEN
2740	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2741	'res cloud_physics = .TRUE.'
2742	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2743	ELSEIF ( icloud_scheme /= 0 ) THEN
2744	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2745	'res cloud_scheme = seifert_beheng'
2746	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
2747	ENDIF
2748	unit = '1/m3'
2749
2750	CASE ( 'pc', 'pr' )
2751	IF ( .NOT. particle_advection ) THEN
2752	message_string = 'output of "' // TRIM( var ) // '" requir' // &
2753	'es a "particles_par"-NAMELIST in the parameter file (PARIN)'
2754	CALL message( 'check_parameters', 'PA0104', 1, 2, 0, 6, 0 )
2755	ENDIF
2756	IF ( TRIM( var ) == 'pc' ) unit = 'number'
2757	IF ( TRIM( var ) == 'pr' ) unit = 'm'
2758
2759	CASE ( 'prr' )
2760	IF ( .NOT. cloud_physics ) THEN
2761	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2762	'res cloud_physics = .TRUE.'
2763	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2764	ELSEIF ( icloud_scheme /= 0 ) THEN
2765	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2766	'res cloud_scheme = seifert_beheng'
2767	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
2768	ELSEIF ( .NOT. precipitation ) THEN
2769	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2770	'res precipitation = .TRUE.'
2771	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2772	ENDIF
2773	unit = 'kg/kg m/s'
2774
2775	CASE ( 'q', 'vpt' )
2776	IF ( .NOT. humidity ) THEN
2777	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2778	'res humidity = .TRUE.'
2779	CALL message( 'check_parameters', 'PA0105', 1, 2, 0, 6, 0 )
2780	ENDIF
2781	IF ( TRIM( var ) == 'q' ) unit = 'kg/kg'
2782	IF ( TRIM( var ) == 'vpt' ) unit = 'K'
2783
2784	CASE ( 'qc' )
2785	IF ( .NOT. cloud_physics ) THEN
2786	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2787	'res cloud_physics = .TRUE.'
2788	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2789	ELSEIF ( icloud_scheme /= 0 ) THEN
2790	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2791	'res cloud_scheme = seifert_beheng'
2792	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
2793	ENDIF
2794	unit = 'kg/kg'
2795
2796	CASE ( 'ql' )
2797	IF ( .NOT. ( cloud_physics .OR. cloud_droplets ) ) THEN
2798	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2799	'res cloud_physics = .TRUE. or cloud_droplets = .TRUE.'
2800	CALL message( 'check_parameters', 'PA0106', 1, 2, 0, 6, 0 )
2801	ENDIF
2802	unit = 'kg/kg'
2803
2804	CASE ( 'ql_c', 'ql_v', 'ql_vp' )
2805	IF ( .NOT. cloud_droplets ) THEN
2806	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2807	'res cloud_droplets = .TRUE.'
2808	CALL message( 'check_parameters', 'PA0107', 1, 2, 0, 6, 0 )
2809	ENDIF
2810	IF ( TRIM( var ) == 'ql_c' ) unit = 'kg/kg'
2811	IF ( TRIM( var ) == 'ql_v' ) unit = 'm3'
2812	IF ( TRIM( var ) == 'ql_vp' ) unit = 'none'
2813
2814	CASE ( 'qr' )
2815	IF ( .NOT. cloud_physics ) THEN
2816	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2817	'res cloud_physics = .TRUE.'
2818	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2819	ELSEIF ( icloud_scheme /= 0 ) THEN
2820	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2821	'res cloud_scheme = seifert_beheng'
2822	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
2823	ELSEIF ( .NOT. precipitation ) THEN
2824	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2825	'res precipitation = .TRUE.'
2826	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2827	ENDIF
2828	unit = 'kg/kg'
2829
2830	CASE ( 'qv' )
2831	IF ( .NOT. cloud_physics ) THEN
2832	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2833	'res cloud_physics = .TRUE.'
2834	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2835	ENDIF
2836	unit = 'kg/kg'
2837
2838	CASE ( 'rho' )
2839	IF ( .NOT. ocean ) THEN
2840	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2841	'res ocean = .TRUE.'
2842	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
2843	ENDIF
2844	unit = 'kg/m3'
2845
2846	CASE ( 's' )
2847	IF ( .NOT. passive_scalar ) THEN
2848	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2849	'res passive_scalar = .TRUE.'
2850	CALL message( 'check_parameters', 'PA0110', 1, 2, 0, 6, 0 )
2851	ENDIF
2852	unit = 'conc'
2853
2854	CASE ( 'sa' )
2855	IF ( .NOT. ocean ) THEN
2856	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2857	'res ocean = .TRUE.'
2858	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
2859	ENDIF
2860	unit = 'psu'
2861
2862	CASE ( 'u', 't', 'lwp', 'pra', 'prr', 'qsws', 'shf', 'z0', 'z0h*' )
2863	IF ( k == 0 .OR. data_output(i)(ilen-2:ilen) /= '_xy' ) THEN
2864	message_string = 'illegal value for data_output: "' // &
2865	TRIM( var ) // '" & only 2d-horizontal ' // &
2866	'cross sections are allowed for this value'
2867	CALL message( 'check_parameters', 'PA0111', 1, 2, 0, 6, 0 )
2868	ENDIF
2869	IF ( TRIM( var ) == 'lwp*' .AND. .NOT. cloud_physics ) THEN
2870	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2871	'res cloud_physics = .TRUE.'
2872	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2873	ENDIF
2874	IF ( TRIM( var ) == 'pra*' .AND. .NOT. precipitation ) THEN
2875	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2876	'res precipitation = .TRUE.'
2877	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2878	ENDIF
2879	IF ( TRIM( var ) == 'pra*' .AND. j == 1 ) THEN
2880	message_string = 'temporal averaging of precipitation ' // &
2881	'amount "' // TRIM( var ) // '" is not possible'
2882	CALL message( 'check_parameters', 'PA0113', 1, 2, 0, 6, 0 )
2883	ENDIF
2884	IF ( TRIM( var ) == 'prr*' .AND. .NOT. precipitation ) THEN
2885	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2886	'res precipitation = .TRUE.'
2887	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2888	ENDIF
2889	IF ( TRIM( var ) == 'qsws*' .AND. .NOT. humidity ) THEN
2890	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2891	'res humidity = .TRUE.'
2892	CALL message( 'check_parameters', 'PA0322', 1, 2, 0, 6, 0 )
2893	ENDIF
2894
2895	IF ( TRIM( var ) == 'lwp' ) unit = 'kg/kgm'
2896	IF ( TRIM( var ) == 'pra*' ) unit = 'mm'
2897	IF ( TRIM( var ) == 'prr*' ) unit = 'mm/s'
2898	IF ( TRIM( var ) == 'qsws*' ) unit = 'kgm/kgs'
2899	IF ( TRIM( var ) == 'shf' ) unit = 'Km/s'
2900	IF ( TRIM( var ) == 't*' ) unit = 'K'
2901	IF ( TRIM( var ) == 'u*' ) unit = 'm/s'
2902	IF ( TRIM( var ) == 'z0*' ) unit = 'm'
2903	IF ( TRIM( var ) == 'z0h*' ) unit = 'm'
2904
2905
2906	CASE ( 'p', 'pt', 'u', 'v', 'w' )
2907	IF ( TRIM( var ) == 'p' ) unit = 'Pa'
2908	IF ( TRIM( var ) == 'pt' ) unit = 'K'
2909	IF ( TRIM( var ) == 'u' ) unit = 'm/s'
2910	IF ( TRIM( var ) == 'v' ) unit = 'm/s'
2911	IF ( TRIM( var ) == 'w' ) unit = 'm/s'
2912	CONTINUE
2913
2914	CASE DEFAULT
2915	CALL user_check_data_output( var, unit )
2916
2917	IF ( unit == 'illegal' ) THEN
2918	IF ( data_output_user(1) /= ' ' ) THEN
2919	message_string = 'illegal value for data_output or ' // &
2920	'data_output_user = "' // TRIM( data_output(i) ) // '"'
2921	CALL message( 'check_parameters', 'PA0114', 1, 2, 0, 6, 0 )
2922	ELSE
2923	message_string = 'illegal value for data_output =' // &
2924	TRIM( data_output(i) ) // '"'
2925	CALL message( 'check_parameters', 'PA0115', 1, 2, 0, 6, 0 )
2926	ENDIF
2927	ENDIF
2928
2929	END SELECT
2930	!
2931	!-- Set the internal steering parameters appropriately
2932	IF ( k == 0 ) THEN
2933	do3d_no(j) = do3d_no(j) + 1
2934	do3d(j,do3d_no(j)) = data_output(i)
2935	do3d_unit(j,do3d_no(j)) = unit
2936	ELSE
2937	do2d_no(j) = do2d_no(j) + 1
2938	do2d(j,do2d_no(j)) = data_output(i)
2939	do2d_unit(j,do2d_no(j)) = unit
2940	IF ( data_output(i)(ilen-2:ilen) == '_xy' ) THEN
2941	data_output_xy(j) = .TRUE.
2942	ENDIF
2943	IF ( data_output(i)(ilen-2:ilen) == '_xz' ) THEN
2944	data_output_xz(j) = .TRUE.
2945	ENDIF
2946	IF ( data_output(i)(ilen-2:ilen) == '_yz' ) THEN
2947	data_output_yz(j) = .TRUE.
2948	ENDIF
2949	ENDIF
2950
2951	IF ( j == 1 ) THEN
2952	!
2953	!-- Check, if variable is already subject to averaging
2954	found = .FALSE.
2955	DO k = 1, doav_n
2956	IF ( TRIM( doav(k) ) == TRIM( var ) ) found = .TRUE.
2957	ENDDO
2958
2959	IF ( .NOT. found ) THEN
2960	doav_n = doav_n + 1
2961	doav(doav_n) = var
2962	ENDIF
2963	ENDIF
2964
2965	i = i + 1
2966	ENDDO
2967
2968	!
2969	!-- Averaged 2d or 3d output requires that an averaging interval has been set
2970	IF ( doav_n > 0 .AND. averaging_interval == 0.0 ) THEN
2971	WRITE( message_string, * ) 'output of averaged quantity "', &
2972	TRIM( doav(1) ), '_av" requires to set a ', &
2973	'non-zero & averaging interval'
2974	CALL message( 'check_parameters', 'PA0323', 1, 2, 0, 6, 0 )
2975	ENDIF
2976
2977	!
2978	!-- Check sectional planes and store them in one shared array
2979	IF ( ANY( section_xy > nz + 1 ) ) THEN
2980	WRITE( message_string, * ) 'section_xy must be <= nz + 1 = ', nz + 1
2981	CALL message( 'check_parameters', 'PA0319', 1, 2, 0, 6, 0 )
2982	ENDIF
2983	IF ( ANY( section_xz > ny + 1 ) ) THEN
2984	WRITE( message_string, * ) 'section_xz must be <= ny + 1 = ', ny + 1
2985	CALL message( 'check_parameters', 'PA0320', 1, 2, 0, 6, 0 )
2986	ENDIF
2987	IF ( ANY( section_yz > nx + 1 ) ) THEN
2988	WRITE( message_string, * ) 'section_yz must be <= nx + 1 = ', nx + 1
2989	CALL message( 'check_parameters', 'PA0321', 1, 2, 0, 6, 0 )
2990	ENDIF
2991	section(:,1) = section_xy
2992	section(:,2) = section_xz
2993	section(:,3) = section_yz
2994
2995	!
2996	!-- Upper plot limit for 2D vertical sections
2997	IF ( z_max_do2d == -1.0 ) z_max_do2d = zu(nzt)
2998	IF ( z_max_do2d < zu(nzb+1) .OR. z_max_do2d > zu(nzt) ) THEN
2999	WRITE( message_string, * ) 'z_max_do2d = ', z_max_do2d, &
3000	' must be >= ', zu(nzb+1), '(zu(nzb+1)) and <= ', zu(nzt), &
3001	' (zu(nzt))'
3002	CALL message( 'check_parameters', 'PA0116', 1, 2, 0, 6, 0 )
3003	ENDIF
3004
3005	!
3006	!-- Upper plot limit for 3D arrays
3007	IF ( nz_do3d == -9999 ) nz_do3d = nzt + 1
3008
3009	!
3010	!-- Determine and check accuracy for compressed 3D plot output
3011	IF ( do3d_compress ) THEN
3012	!
3013	!-- Compression only permissible on T3E machines
3014	IF ( host(1:3) /= 't3e' ) THEN
3015	message_string = 'do3d_compress = .TRUE. not allowed on host "' // &
3016	TRIM( host ) // '"'
3017	CALL message( 'check_parameters', 'PA0117', 1, 2, 0, 6, 0 )
3018	ENDIF
3019
3020	i = 1
3021	DO WHILE ( do3d_comp_prec(i) /= ' ' )
3022
3023	ilen = LEN_TRIM( do3d_comp_prec(i) )
3024	IF ( LLT( do3d_comp_prec(i)(ilen:ilen), '0' ) .OR. &
3025	LGT( do3d_comp_prec(i)(ilen:ilen), '9' ) ) THEN
3026	WRITE( message_string, * ) 'illegal precision: do3d_comp_prec', &
3027	'(', i, ') = "', TRIM(do3d_comp_prec(i)),'"'
3028	CALL message( 'check_parameters', 'PA0118', 1, 2, 0, 6, 0 )
3029	ENDIF
3030
3031	prec = IACHAR( do3d_comp_prec(i)(ilen:ilen) ) - IACHAR( '0' )
3032	var = do3d_comp_prec(i)(1:ilen-1)
3033
3034	SELECT CASE ( var )
3035
3036	CASE ( 'u' )
3037	j = 1
3038	CASE ( 'v' )
3039	j = 2
3040	CASE ( 'w' )
3041	j = 3
3042	CASE ( 'p' )
3043	j = 4
3044	CASE ( 'pt' )
3045	j = 5
3046
3047	CASE DEFAULT
3048	WRITE( message_string, * ) 'unknown variable "', &
3049	TRIM( do3d_comp_prec(i) ), '" given for do3d_comp_prec(', &
3050	i, ')'
3051	CALL message( 'check_parameters', 'PA0119', 1, 2, 0, 6, 0 )
3052
3053	END SELECT
3054
3055	plot_3d_precision(j)%precision = prec
3056	i = i + 1
3057
3058	ENDDO
3059	ENDIF
3060
3061	!
3062	!-- Check the data output format(s)
3063	IF ( data_output_format(1) == ' ' ) THEN
3064	!
3065	!-- Default value
3066	netcdf_output = .TRUE.
3067	ELSE
3068	i = 1
3069	DO WHILE ( data_output_format(i) /= ' ' )
3070
3071	SELECT CASE ( data_output_format(i) )
3072
3073	CASE ( 'netcdf' )
3074	netcdf_output = .TRUE.
3075	CASE ( 'iso2d' )
3076	iso2d_output = .TRUE.
3077	CASE ( 'avs' )
3078	avs_output = .TRUE.
3079
3080	CASE DEFAULT
3081	message_string = 'unknown value for data_output_format "' // &
3082	TRIM( data_output_format(i) ) // '"'
3083	CALL message( 'check_parameters', 'PA0120', 1, 2, 0, 6, 0 )
3084
3085	END SELECT
3086
3087	i = i + 1
3088	IF ( i > 10 ) EXIT
3089
3090	ENDDO
3091	ENDIF
3092
3093	!
3094	!-- Set output format string (used in header)
3095	IF ( netcdf_output ) THEN
3096
3097	SELECT CASE ( netcdf_data_format )
3098	CASE ( 1 )
3099	output_format_netcdf = 'netCDF classic'
3100	CASE ( 2 )
3101	output_format_netcdf = 'netCDF 64bit offset'
3102	CASE ( 3 )
3103	output_format_netcdf = 'netCDF4/HDF5'
3104	CASE ( 4 )
3105	output_format_netcdf = 'netCDF4/HDF5 classic'
3106	CASE ( 5 )
3107	output_format_netcdf = 'parallel netCDF4/HDF5'
3108	CASE ( 6 )
3109	output_format_netcdf = 'parallel netCDF4/HDF5 classic'
3110
3111	END SELECT
3112
3113	ENDIF
3114
3115	#if defined( __spectra )
3116	!
3117	!-- Check the number of spectra level to be output
3118	i = 1
3119	DO WHILE ( comp_spectra_level(i) /= 999999 .AND. i <= 100 )
3120	i = i + 1
3121	ENDDO
3122	i = i - 1
3123	IF ( i == 0 ) THEN
3124	WRITE( message_string, * ) 'no spectra levels given'
3125	CALL message( 'check_parameters', 'PA0019', 1, 2, 0, 6, 0 )
3126	ENDIF
3127	#endif
3128
3129	!
3130	!-- Check mask conditions
3131	DO mid = 1, max_masks
3132	IF ( data_output_masks(mid,1) /= ' ' .OR. &
3133	data_output_masks_user(mid,1) /= ' ' ) THEN
3134	masks = masks + 1
3135	ENDIF
3136	ENDDO
3137
3138	IF ( masks < 0 .OR. masks > max_masks ) THEN
3139	WRITE( message_string, * ) 'illegal value: masks must be >= 0 and ', &
3140	'<= ', max_masks, ' (=max_masks)'
3141	CALL message( 'check_parameters', 'PA0325', 1, 2, 0, 6, 0 )
3142	ENDIF
3143	IF ( masks > 0 ) THEN
3144	mask_scale(1) = mask_scale_x
3145	mask_scale(2) = mask_scale_y
3146	mask_scale(3) = mask_scale_z
3147	IF ( ANY( mask_scale <= 0.0 ) ) THEN
3148	WRITE( message_string, * ) &
3149	'illegal value: mask_scale_x, mask_scale_y and mask_scale_z', &
3150	'must be > 0.0'
3151	CALL message( 'check_parameters', 'PA0326', 1, 2, 0, 6, 0 )
3152	ENDIF
3153	!
3154	!-- Generate masks for masked data output
3155	!-- Parallel netcdf output is not tested so far for masked data, hence
3156	!-- netcdf_data_format is switched back to non-paralell output.
3157	netcdf_data_format_save = netcdf_data_format
3158	IF ( netcdf_data_format > 4 ) THEN
3159	IF ( netcdf_data_format == 5 ) netcdf_data_format = 3
3160	IF ( netcdf_data_format == 6 ) netcdf_data_format = 4
3161	message_string = 'netCDF file formats '// &
3162	'5 (parallel netCDF 4) and ' // &
3163	'6 (parallel netCDF 4 Classic model) '// &
3164	'&are currently not supported (not yet tested) ' // &
3165	'for masked data.&Using respective non-parallel' // &
3166	' output for masked data.'
3167	CALL message( 'check_parameters', 'PA0383', 0, 0, 0, 6, 0 )
3168	ENDIF
3169	CALL init_masks
3170	netcdf_data_format = netcdf_data_format_save
3171	ENDIF
3172
3173	!
3174	!-- Check the NetCDF data format
3175	#if ! defined ( __check )
3176	IF ( netcdf_data_format > 2 ) THEN
3177	#if defined( __netcdf4 )
3178	CONTINUE
3179	#else
3180	message_string = 'netCDF: netCDF4 format requested but no ' // &
3181	'cpp-directive __netcdf4 given & switch ' // &
3182	'back to 64-bit offset format'
3183	CALL message( 'check_parameters', 'PA0171', 0, 1, 0, 6, 0 )
3184	netcdf_data_format = 2
3185	#endif
3186	ENDIF
3187	IF ( netcdf_data_format > 4 ) THEN
3188	#if defined( __netcdf4 ) && defined( __netcdf4_parallel )
3189	CONTINUE
3190	#else
3191	message_string = 'netCDF: netCDF4 parallel output requested but no ' // &
3192	'cpp-directive __netcdf4_parallel given & switch ' // &
3193	'back to netCDF4 non-parallel output'
3194	CALL message( 'check_parameters', 'PA0099', 0, 1, 0, 6, 0 )
3195	netcdf_data_format = netcdf_data_format - 2
3196	#endif
3197	ENDIF
3198	#endif
3199
3200	!
3201	!-- Calculate fixed number of output time levels for parallel netcdf output.
3202	!-- The time dimension has to be limited for paralell output, otherwise the
3203	!-- performance drops significantly.
3204	IF ( netcdf_output ) THEN
3205	IF ( netcdf_data_format > 4 ) THEN
3206	ntdim_3d(0) = INT( ( end_time - skip_time_do3d ) / dt_do3d )
3207	IF ( do3d_at_begin ) ntdim_3d(0) = ntdim_3d(0) + 1
3208	ntdim_3d(1) = INT( ( end_time - skip_time_data_output_av ) &
3209	/ dt_data_output_av )
3210	ntdim_2d_xy(0) = INT( ( end_time - skip_time_do2d_xy ) / dt_do2d_xy )
3211	ntdim_2d_xz(0) = INT( ( end_time - skip_time_do2d_xz ) / dt_do2d_xz )
3212	ntdim_2d_yz(0) = INT( ( end_time - skip_time_do2d_yz ) / dt_do2d_yz )
3213	IF ( do2d_at_begin ) THEN
3214	ntdim_2d_xy(0) = ntdim_2d_xy(0) + 1
3215	ntdim_2d_xz(0) = ntdim_2d_xz(0) + 1
3216	ntdim_2d_yz(0) = ntdim_2d_yz(0) + 1
3217	ENDIF
3218	ntdim_2d_xy(1) = ntdim_3d(1)
3219	ntdim_2d_xz(1) = ntdim_3d(1)
3220	ntdim_2d_yz(1) = ntdim_3d(1)
3221	ENDIF
3222	ENDIF
3223
3224	#if ! defined( __check )
3225	!
3226	!-- Check netcdf precison
3227	ldum = .FALSE.
3228	CALL define_netcdf_header( 'ch', ldum, 0 )
3229	#endif
3230	!
3231	!-- Check, whether a constant diffusion coefficient shall be used
3232	IF ( km_constant /= -1.0 ) THEN
3233	IF ( km_constant < 0.0 ) THEN
3234	WRITE( message_string, * ) 'km_constant = ', km_constant, ' < 0.0'
3235	CALL message( 'check_parameters', 'PA0121', 1, 2, 0, 6, 0 )
3236	ELSE
3237	IF ( prandtl_number < 0.0 ) THEN
3238	WRITE( message_string, * ) 'prandtl_number = ', prandtl_number, &
3239	' < 0.0'
3240	CALL message( 'check_parameters', 'PA0122', 1, 2, 0, 6, 0 )
3241	ENDIF
3242	constant_diffusion = .TRUE.
3243
3244	IF ( prandtl_layer ) THEN
3245	message_string = 'prandtl_layer is not allowed with fixed ' // &
3246	'value of km'
3247	CALL message( 'check_parameters', 'PA0123', 1, 2, 0, 6, 0 )
3248	ENDIF
3249	ENDIF
3250	ENDIF
3251
3252	!
3253	!-- In case of non-cyclic lateral boundaries and a damping layer for the
3254	!-- potential temperature, check the width of the damping layer
3255	IF ( bc_lr /= 'cyclic' ) THEN
3256	IF ( pt_damping_width < 0.0 .OR. pt_damping_width > REAL( nx * dx ) ) THEN
3257	message_string = 'pt_damping_width out of range'
3258	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
3259	ENDIF
3260	ENDIF
3261
3262	IF ( bc_ns /= 'cyclic' ) THEN
3263	IF ( pt_damping_width < 0.0 .OR. pt_damping_width > REAL( ny * dy ) ) THEN
3264	message_string = 'pt_damping_width out of range'
3265	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
3266	ENDIF
3267	ENDIF
3268
3269	!
3270	!-- Check value range for rif
3271	IF ( rif_min >= rif_max ) THEN
3272	WRITE( message_string, * ) 'rif_min = ', rif_min, ' must be less ', &
3273	'than rif_max = ', rif_max
3274	CALL message( 'check_parameters', 'PA0125', 1, 2, 0, 6, 0 )
3275	ENDIF
3276
3277	!
3278	!-- Determine upper and lower hight level indices for random perturbations
3279	IF ( disturbance_level_b == -9999999.9_wp ) THEN
3280	IF ( ocean ) THEN
3281	disturbance_level_b = zu((nzt*2)/3)
3282	disturbance_level_ind_b = ( nzt * 2 ) / 3
3283	ELSE
3284	disturbance_level_b = zu(nzb+3)
3285	disturbance_level_ind_b = nzb + 3
3286	ENDIF
3287	ELSEIF ( disturbance_level_b < zu(3) ) THEN
3288	WRITE( message_string, * ) 'disturbance_level_b = ', &
3289	disturbance_level_b, ' must be >= ', zu(3), '(zu(3))'
3290	CALL message( 'check_parameters', 'PA0126', 1, 2, 0, 6, 0 )
3291	ELSEIF ( disturbance_level_b > zu(nzt-2) ) THEN
3292	WRITE( message_string, * ) 'disturbance_level_b = ', &
3293	disturbance_level_b, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
3294	CALL message( 'check_parameters', 'PA0127', 1, 2, 0, 6, 0 )
3295	ELSE
3296	DO k = 3, nzt-2
3297	IF ( disturbance_level_b <= zu(k) ) THEN
3298	disturbance_level_ind_b = k
3299	EXIT
3300	ENDIF
3301	ENDDO
3302	ENDIF
3303
3304	IF ( disturbance_level_t == -9999999.9_wp ) THEN
3305	IF ( ocean ) THEN
3306	disturbance_level_t = zu(nzt-3)
3307	disturbance_level_ind_t = nzt - 3
3308	ELSE
3309	disturbance_level_t = zu(nzt/3)
3310	disturbance_level_ind_t = nzt / 3
3311	ENDIF
3312	ELSEIF ( disturbance_level_t > zu(nzt-2) ) THEN
3313	WRITE( message_string, * ) 'disturbance_level_t = ', &
3314	disturbance_level_t, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
3315	CALL message( 'check_parameters', 'PA0128', 1, 2, 0, 6, 0 )
3316	ELSEIF ( disturbance_level_t < disturbance_level_b ) THEN
3317	WRITE( message_string, * ) 'disturbance_level_t = ', &
3318	disturbance_level_t, ' must be >= disturbance_level_b = ', &
3319	disturbance_level_b
3320	CALL message( 'check_parameters', 'PA0129', 1, 2, 0, 6, 0 )
3321	ELSE
3322	DO k = 3, nzt-2
3323	IF ( disturbance_level_t <= zu(k) ) THEN
3324	disturbance_level_ind_t = k
3325	EXIT
3326	ENDIF
3327	ENDDO
3328	ENDIF
3329
3330	!
3331	!-- Check again whether the levels determined this way are ok.
3332	!-- Error may occur at automatic determination and too few grid points in
3333	!-- z-direction.
3334	IF ( disturbance_level_ind_t < disturbance_level_ind_b ) THEN
3335	WRITE( message_string, * ) 'disturbance_level_ind_t = ', &
3336	disturbance_level_ind_t, ' must be >= disturbance_level_b = ', &
3337	disturbance_level_b
3338	CALL message( 'check_parameters', 'PA0130', 1, 2, 0, 6, 0 )
3339	ENDIF
3340
3341	!
3342	!-- Determine the horizontal index range for random perturbations.
3343	!-- In case of non-cyclic horizontal boundaries, no perturbations are imposed
3344	!-- near the inflow and the perturbation area is further limited to ...(1)
3345	!-- after the initial phase of the flow.
3346	dist_nxl = 0; dist_nxr = nx
3347	dist_nys = 0; dist_nyn = ny
3348	IF ( bc_lr /= 'cyclic' ) THEN
3349	IF ( inflow_disturbance_begin == -1 ) THEN
3350	inflow_disturbance_begin = MIN( 10, nx/2 )
3351	ENDIF
3352	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > nx )&
3353	THEN
3354	message_string = 'inflow_disturbance_begin out of range'
3355	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
3356	ENDIF
3357	IF ( inflow_disturbance_end == -1 ) THEN
3358	inflow_disturbance_end = MIN( 100, 3*nx/4 )
3359	ENDIF
3360	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > nx ) &
3361	THEN
3362	message_string = 'inflow_disturbance_end out of range'
3363	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
3364	ENDIF
3365	ELSEIF ( bc_ns /= 'cyclic' ) THEN
3366	IF ( inflow_disturbance_begin == -1 ) THEN
3367	inflow_disturbance_begin = MIN( 10, ny/2 )
3368	ENDIF
3369	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > ny )&
3370	THEN
3371	message_string = 'inflow_disturbance_begin out of range'
3372	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
3373	ENDIF
3374	IF ( inflow_disturbance_end == -1 ) THEN
3375	inflow_disturbance_end = MIN( 100, 3*ny/4 )
3376	ENDIF
3377	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > ny ) &
3378	THEN
3379	message_string = 'inflow_disturbance_end out of range'
3380	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
3381	ENDIF
3382	ENDIF
3383
3384	IF ( bc_lr == 'radiation/dirichlet' ) THEN
3385	dist_nxr = nx - inflow_disturbance_begin
3386	dist_nxl(1) = nx - inflow_disturbance_end
3387	ELSEIF ( bc_lr == 'dirichlet/radiation' ) THEN
3388	dist_nxl = inflow_disturbance_begin
3389	dist_nxr(1) = inflow_disturbance_end
3390	ENDIF
3391	IF ( bc_ns == 'dirichlet/radiation' ) THEN
3392	dist_nyn = ny - inflow_disturbance_begin
3393	dist_nys(1) = ny - inflow_disturbance_end
3394	ELSEIF ( bc_ns == 'radiation/dirichlet' ) THEN
3395	dist_nys = inflow_disturbance_begin
3396	dist_nyn(1) = inflow_disturbance_end
3397	ENDIF
3398
3399	!
3400	!-- A turbulent inflow requires Dirichlet conditions at the respective inflow
3401	!-- boundary (so far, a turbulent inflow is realized from the left side only)
3402	IF ( turbulent_inflow .AND. bc_lr /= 'dirichlet/radiation' ) THEN
3403	message_string = 'turbulent_inflow = .T. requires a Dirichlet ' // &
3404	'condition at the inflow boundary'
3405	CALL message( 'check_parameters', 'PA0133', 1, 2, 0, 6, 0 )
3406	ENDIF
3407
3408	!
3409	!-- Turbulent inflow requires that 3d arrays have been cyclically filled with
3410	!-- data from prerun in the first main run
3411	IF ( turbulent_inflow .AND. initializing_actions /= 'cyclic_fill' .AND. &
3412	initializing_actions /= 'read_restart_data' ) THEN
3413	message_string = 'turbulent_inflow = .T. requires ' // &
3414	'initializing_actions = ''cyclic_fill'' '
3415	CALL message( 'check_parameters', 'PA0055', 1, 2, 0, 6, 0 )
3416	ENDIF
3417
3418	!
3419	!-- In case of turbulent inflow calculate the index of the recycling plane
3420	IF ( turbulent_inflow ) THEN
3421	IF ( recycling_width == 9999999.9_wp ) THEN
3422	!
3423	!-- Set the default value for the width of the recycling domain
3424	recycling_width = 0.1 * nx * dx
3425	ELSE
3426	IF ( recycling_width < dx .OR. recycling_width > nx * dx ) THEN
3427	WRITE( message_string, * ) 'illegal value for recycling_width:', &
3428	' ', recycling_width
3429	CALL message( 'check_parameters', 'PA0134', 1, 2, 0, 6, 0 )
3430	ENDIF
3431	ENDIF
3432	!
3433	!-- Calculate the index
3434	recycling_plane = recycling_width / dx
3435	ENDIF
3436
3437	!
3438	!-- Check random generator
3439	IF ( random_generator /= 'system-specific' .AND. &
3440	random_generator /= 'numerical-recipes' ) THEN
3441	message_string = 'unknown random generator: random_generator = "' // &
3442	TRIM( random_generator ) // '"'
3443	CALL message( 'check_parameters', 'PA0135', 1, 2, 0, 6, 0 )
3444	ENDIF
3445
3446	!
3447	!-- Determine damping level index for 1D model
3448	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
3449	IF ( damp_level_1d == -1.0 ) THEN
3450	damp_level_1d = zu(nzt+1)
3451	damp_level_ind_1d = nzt + 1
3452	ELSEIF ( damp_level_1d < 0.0 .OR. damp_level_1d > zu(nzt+1) ) THEN
3453	WRITE( message_string, * ) 'damp_level_1d = ', damp_level_1d, &
3454	' must be > 0.0 and < ', zu(nzt+1), '(zu(nzt+1))'
3455	CALL message( 'check_parameters', 'PA0136', 1, 2, 0, 6, 0 )
3456	ELSE
3457	DO k = 1, nzt+1
3458	IF ( damp_level_1d <= zu(k) ) THEN
3459	damp_level_ind_1d = k
3460	EXIT
3461	ENDIF
3462	ENDDO
3463	ENDIF
3464	ENDIF
3465
3466	!
3467	!-- Check some other 1d-model parameters
3468	IF ( TRIM( mixing_length_1d ) /= 'as_in_3d_model' .AND. &
3469	TRIM( mixing_length_1d ) /= 'blackadar' ) THEN
3470	message_string = 'mixing_length_1d = "' // TRIM( mixing_length_1d ) // &
3471	'" is unknown'
3472	CALL message( 'check_parameters', 'PA0137', 1, 2, 0, 6, 0 )
3473	ENDIF
3474	IF ( TRIM( dissipation_1d ) /= 'as_in_3d_model' .AND. &
3475	TRIM( dissipation_1d ) /= 'detering' ) THEN
3476	message_string = 'dissipation_1d = "' // TRIM( dissipation_1d ) // &
3477	'" is unknown'
3478	CALL message( 'check_parameters', 'PA0138', 1, 2, 0, 6, 0 )
3479	ENDIF
3480
3481	!
3482	!-- Set time for the next user defined restart (time_restart is the
3483	!-- internal parameter for steering restart events)
3484	IF ( restart_time /= 9999999.9_wp ) THEN
3485	IF ( restart_time > time_since_reference_point ) THEN
3486	time_restart = restart_time
3487	ENDIF
3488	ELSE
3489	!
3490	!-- In case of a restart run, set internal parameter to default (no restart)
3491	!-- if the NAMELIST-parameter restart_time is omitted
3492	time_restart = 9999999.9_wp
3493	ENDIF
3494
3495	!
3496	!-- Set default value of the time needed to terminate a model run
3497	IF ( termination_time_needed == -1.0 ) THEN
3498	IF ( host(1:3) == 'ibm' ) THEN
3499	termination_time_needed = 300.0
3500	ELSE
3501	termination_time_needed = 35.0
3502	ENDIF
3503	ENDIF
3504
3505	!
3506	!-- Check the time needed to terminate a model run
3507	IF ( host(1:3) == 't3e' ) THEN
3508	!
3509	!-- Time needed must be at least 30 seconds on all CRAY machines, because
3510	!-- MPP_TREMAIN gives the remaining CPU time only in steps of 30 seconds
3511	IF ( termination_time_needed <= 30.0 ) THEN
3512	WRITE( message_string, * ) 'termination_time_needed = ', &
3513	termination_time_needed, ' must be > 30.0 on host "', &
3514	TRIM( host ), '"'
3515	CALL message( 'check_parameters', 'PA0139', 1, 2, 0, 6, 0 )
3516	ENDIF
3517	ELSEIF ( host(1:3) == 'ibm' ) THEN
3518	!
3519	!-- On IBM-regatta machines the time should be at least 300 seconds,
3520	!-- because the job time consumed before executing palm (for compiling,
3521	!-- copying of files, etc.) has to be regarded
3522	IF ( termination_time_needed < 300.0 ) THEN
3523	WRITE( message_string, * ) 'termination_time_needed = ', &
3524	termination_time_needed, ' should be >= 300.0 on host "', &
3525	TRIM( host ), '"'
3526	CALL message( 'check_parameters', 'PA0140', 1, 2, 0, 6, 0 )
3527	ENDIF
3528	ENDIF
3529
3530	!
3531	!-- Check pressure gradient conditions
3532	IF ( dp_external .AND. conserve_volume_flow ) THEN
3533	WRITE( message_string, * ) 'Both dp_external and conserve_volume_flo', &
3534	'w are .TRUE. but one of them must be .FALSE.'
3535	CALL message( 'check_parameters', 'PA0150', 1, 2, 0, 6, 0 )
3536	ENDIF
3537	IF ( dp_external ) THEN
3538	IF ( dp_level_b < zu(nzb) .OR. dp_level_b > zu(nzt) ) THEN
3539	WRITE( message_string, * ) 'dp_level_b = ', dp_level_b, ' is out ', &
3540	' of range'
3541	CALL message( 'check_parameters', 'PA0151', 1, 2, 0, 6, 0 )
3542	ENDIF
3543	IF ( .NOT. ANY( dpdxy /= 0.0 ) ) THEN
3544	WRITE( message_string, * ) 'dp_external is .TRUE. but dpdxy is ze', &
3545	'ro, i.e. the external pressure gradient & will not be applied'
3546	CALL message( 'check_parameters', 'PA0152', 0, 1, 0, 6, 0 )
3547	ENDIF
3548	ENDIF
3549	IF ( ANY( dpdxy /= 0.0 ) .AND. .NOT. dp_external ) THEN
3550	WRITE( message_string, * ) 'dpdxy is nonzero but dp_external is ', &
3551	'.FALSE., i.e. the external pressure gradient & will not be applied'
3552	CALL message( 'check_parameters', 'PA0153', 0, 1, 0, 6, 0 )
3553	ENDIF
3554	IF ( conserve_volume_flow ) THEN
3555	IF ( TRIM( conserve_volume_flow_mode ) == 'default' ) THEN
3556
3557	conserve_volume_flow_mode = 'initial_profiles'
3558
3559	ELSEIF ( TRIM( conserve_volume_flow_mode ) /= 'initial_profiles' .AND. &
3560	TRIM( conserve_volume_flow_mode ) /= 'inflow_profile' .AND. &
3561	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) THEN
3562	WRITE( message_string, * ) 'unknown conserve_volume_flow_mode: ', &
3563	conserve_volume_flow_mode
3564	CALL message( 'check_parameters', 'PA0154', 1, 2, 0, 6, 0 )
3565	ENDIF
3566	IF ( (bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic') .AND. &
3567	TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
3568	WRITE( message_string, * ) 'non-cyclic boundary conditions ', &
3569	'require conserve_volume_flow_mode = ''initial_profiles'''
3570	CALL message( 'check_parameters', 'PA0155', 1, 2, 0, 6, 0 )
3571	ENDIF
3572	IF ( bc_lr == 'cyclic' .AND. bc_ns == 'cyclic' .AND. &
3573	TRIM( conserve_volume_flow_mode ) == 'inflow_profile' ) THEN
3574	WRITE( message_string, * ) 'cyclic boundary conditions ', &
3575	'require conserve_volume_flow_mode = ''initial_profiles''', &
3576	' or ''bulk_velocity'''
3577	CALL message( 'check_parameters', 'PA0156', 1, 2, 0, 6, 0 )
3578	ENDIF
3579	ENDIF
3580	IF ( ( u_bulk /= 0.0 .OR. v_bulk /= 0.0 ) .AND. &
3581	( .NOT. conserve_volume_flow .OR. &
3582	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) ) THEN
3583	WRITE( message_string, * ) 'nonzero bulk velocity requires ', &
3584	'conserve_volume_flow = .T. and ', &
3585	'conserve_volume_flow_mode = ''bulk_velocity'''
3586	CALL message( 'check_parameters', 'PA0157', 1, 2, 0, 6, 0 )
3587	ENDIF
3588
3589	!
3590	!-- Check particle attributes
3591	IF ( particle_color /= 'none' ) THEN
3592	IF ( particle_color /= 'absuv' .AND. particle_color /= 'pt*' .AND. &
3593	particle_color /= 'z' ) THEN
3594	message_string = 'illegal value for parameter particle_color: ' // &
3595	TRIM( particle_color)
3596	CALL message( 'check_parameters', 'PA0313', 1, 2, 0, 6, 0 )
3597	ELSE
3598	IF ( color_interval(2) <= color_interval(1) ) THEN
3599	message_string = 'color_interval(2) <= color_interval(1)'
3600	CALL message( 'check_parameters', 'PA0315', 1, 2, 0, 6, 0 )
3601	ENDIF
3602	ENDIF
3603	ENDIF
3604
3605	IF ( particle_dvrpsize /= 'none' ) THEN
3606	IF ( particle_dvrpsize /= 'absw' ) THEN
3607	message_string = 'illegal value for parameter particle_dvrpsize:' // &
3608	' ' // TRIM( particle_color)
3609	CALL message( 'check_parameters', 'PA0314', 1, 2, 0, 6, 0 )
3610	ELSE
3611	IF ( dvrpsize_interval(2) <= dvrpsize_interval(1) ) THEN
3612	message_string = 'dvrpsize_interval(2) <= dvrpsize_interval(1)'
3613	CALL message( 'check_parameters', 'PA0316', 1, 2, 0, 6, 0 )
3614	ENDIF
3615	ENDIF
3616	ENDIF
3617
3618	!
3619	!-- Check nudging and large scale forcing from external file
3620	IF ( nudging .AND. ( .NOT. large_scale_forcing ) ) THEN
3621	message_string = 'Nudging requires large_scale_forcing = .T.. &'// &
3622	'Surface fluxes and geostrophic wind should be &'// &
3623	'prescribed in file LSF_DATA'
3624	CALL message( 'check_parameters', 'PA0374', 1, 2, 0, 6, 0 )
3625	ENDIF
3626
3627	IF ( large_scale_forcing .AND. ( bc_lr /= 'cyclic' .OR. &
3628	bc_ns /= 'cyclic' ) ) THEN
3629	message_string = 'Non-cyclic lateral boundaries do not allow for &' // &
3630	'the usage of large scale forcing from external file.'
3631	CALL message( 'check_parameters', 'PA0375', 1, 2, 0, 6, 0 )
3632	ENDIF
3633
3634	IF ( large_scale_forcing .AND. ( .NOT. humidity ) ) THEN
3635	message_string = 'The usage of large scale forcing from external &'//&
3636	'file LSF_DATA requires humidity = .T..'
3637	CALL message( 'check_parameters', 'PA0376', 1, 2, 0, 6, 0 )
3638	ENDIF
3639
3640	IF ( large_scale_forcing .AND. topography /= 'flat' ) THEN
3641	message_string = 'The usage of large scale forcing from external &'//&
3642	'file LSF_DATA is not implemented for non-flat topography'
3643	CALL message( 'check_parameters', 'PA0377', 1, 2, 0, 6, 0 )
3644	ENDIF
3645
3646	IF ( large_scale_forcing .AND. ocean ) THEN
3647	message_string = 'The usage of large scale forcing from external &'//&
3648	'file LSF_DATA is not implemented for ocean runs'
3649	CALL message( 'check_parameters', 'PA0378', 1, 2, 0, 6, 0 )
3650	ENDIF
3651	!
3652	!-- Check &userpar parameters
3653	CALL user_check_parameters
3654
3655
3656
3657	END SUBROUTINE check_parameters

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |