Home

Context Navigation

source: palm/trunk/SOURCE/check_parameters.f90 @ 1237

Last change on this file since 1237 was 1237, checked in by raasch, 11 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 140.4 KB

Line
1	SUBROUTINE check_parameters
2
3	!--------------------------------------------------------------------------------!
4	! This file is part of PALM.
5	!
6	! PALM is free software: you can redistribute it and/or modify it under the terms
7	! of the GNU General Public License as published by the Free Software Foundation,
8	! either version 3 of the License, or (at your option) any later version.
9	!
10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
13	!
14	! You should have received a copy of the GNU General Public License along with
15	! PALM. If not, see <http://www.gnu.org/licenses/>.
16	!
17	! Copyright 1997-2012 Leibniz University Hannover
18	!--------------------------------------------------------------------------------!
19	!
20	! Current revisions:
21	! -----------------
22	!
23	!
24	! Former revisions:
25	! -----------------
26	! $Id: check_parameters.f90 1237 2013-09-27 07:36:08Z raasch $
27	!
28	! 1236 2013-09-27 07:21:13Z raasch
29	! check number of spectra levels
30	!
31	! 1216 2013-08-26 09:31:42Z raasch
32	! check for transpose_compute_overlap (temporary)
33	!
34	! 1214 2013-08-21 12:29:17Z kanani
35	! additional check for simultaneous use of vertical grid stretching
36	! and particle advection
37	!
38	! 1212 2013-08-15 08:46:27Z raasch
39	! checks for poisfft_hybrid removed
40	!
41	! 1210 2013-08-14 10:58:20Z raasch
42	! check for fftw
43	!
44	! 1179 2013-06-14 05:57:58Z raasch
45	! checks and settings of buoyancy parameters and switches revised,
46	! initial profile for rho added to hom (id=77)
47	!
48	! 1174 2013-05-31 10:28:08Z gryschka
49	! Bugfix in computing initial profiles for ug, vg, lad, q in case of Atmosphere
50	!
51	! 1159 2013-05-21 11:58:22Z fricke
52	! bc_lr/ns_dirneu/neudir removed
53	!
54	! 1115 2013-03-26 18:16:16Z hoffmann
55	! unused variables removed
56	! drizzle can be used without precipitation
57	!
58	! 1111 2013-03-08 23:54:10Z raasch
59	! ibc_p_b = 2 removed
60	!
61	! 1103 2013-02-20 02:15:53Z raasch
62	! Bugfix: turbulent inflow must not require cyclic fill in restart runs
63	!
64	! 1092 2013-02-02 11:24:22Z raasch
65	! unused variables removed
66	!
67	! 1069 2012-11-28 16:18:43Z maronga
68	! allow usage of topography in combination with cloud physics
69	!
70	! 1065 2012-11-22 17:42:36Z hoffmann
71	! Bugfix: It is not allowed to use cloud_scheme = seifert_beheng without
72	! precipitation in order to save computational resources.
73	!
74	! 1060 2012-11-21 07:19:51Z raasch
75	! additional check for parameter turbulent_inflow
76	!
77	! 1053 2012-11-13 17:11:03Z hoffmann
78	! necessary changes for the new two-moment cloud physics scheme added:
79	! - check cloud physics scheme (Kessler or Seifert and Beheng)
80	! - plant_canopy is not allowed
81	! - currently, only cache loop_optimization is allowed
82	! - initial profiles of nr, qr
83	! - boundary condition of nr, qr
84	! - check output quantities (qr, nr, prr)
85	!
86	! 1036 2012-10-22 13:43:42Z raasch
87	! code put under GPL (PALM 3.9)
88	!
89	! 1031/1034 2012-10-22 11:32:49Z raasch
90	! check of netcdf4 parallel file support
91	!
92	! 1019 2012-09-28 06:46:45Z raasch
93	! non-optimized version of prognostic_equations not allowed any more
94	!
95	! 1015 2012-09-27 09:23:24Z raasch
96	! acc allowed for loop optimization,
97	! checks for adjustment of mixing length to the Prandtl mixing length removed
98	!
99	! 1003 2012-09-14 14:35:53Z raasch
100	! checks for cases with unequal subdomain sizes removed
101	!
102	! 1001 2012-09-13 14:08:46Z raasch
103	! all actions concerning leapfrog- and upstream-spline-scheme removed
104	!
105	! 996 2012-09-07 10:41:47Z raasch
106	! little reformatting
107
108	! 978 2012-08-09 08:28:32Z fricke
109	! setting of bc_lr/ns_dirneu/neudir
110	! outflow damping layer removed
111	! check for z0h*
112	! check for pt_damping_width
113	!
114	! 964 2012-07-26 09:14:24Z raasch
115	! check of old profil-parameters removed
116	!
117	! 940 2012-07-09 14:31:00Z raasch
118	! checks for parameter neutral
119	!
120	! 924 2012-06-06 07:44:41Z maronga
121	! Bugfix: preprocessor directives caused error during compilation
122	!
123	! 892 2012-05-02 13:51:44Z maronga
124	! Bugfix for parameter file check ( excluding __netcdf4 )
125	!
126	! 866 2012-03-28 06:44:41Z raasch
127	! use only 60% of the geostrophic wind as translation speed in case of Galilean
128	! transformation and use_ug_for_galilei_tr = .T. in order to mimimize the
129	! timestep
130	!
131	! 861 2012-03-26 14:18:34Z suehring
132	! Check for topography and ws-scheme removed.
133	! Check for loop_optimization = 'vector' and ws-scheme removed.
134	!
135	! 845 2012-03-07 10:23:05Z maronga
136	! Bugfix: exclude __netcdf4 directive part from namelist file check compilation
137	!
138	! 828 2012-02-21 12:00:36Z raasch
139	! check of collision_kernel extended
140	!
141	! 825 2012-02-19 03:03:44Z raasch
142	! check for collision_kernel and curvature_solution_effects
143	!
144	! 809 2012-01-30 13:32:58Z maronga
145	! Bugfix: replaced .AND. and .NOT. with && and ! in the preprocessor directives
146	!
147	! 807 2012-01-25 11:53:51Z maronga
148	! New cpp directive "__check" implemented which is used by check_namelist_files
149	!
150	! 774 2011-10-27 13:34:16Z letzel
151	! bugfix for prescribed u,v-profiles
152	!
153	! 767 2011-10-14 06:39:12Z raasch
154	! Calculating u,v-profiles from given profiles by linear interpolation.
155	! bugfix: dirichlet_0 conditions for ug/vg moved from init_3d_model to here
156	!
157	! 707 2011-03-29 11:39:40Z raasch
158	! setting of bc_lr/ns_dirrad/raddir
159	!
160	! 689 2011-02-20 19:31:12z gryschka
161	! Bugfix for some logical expressions
162	! (syntax was not compatible with all compilers)
163	!
164	! 680 2011-02-04 23:16:06Z gryschka
165	! init_vortex is not allowed with volume_flow_control
166	!
167	! 673 2011-01-18 16:19:48Z suehring
168	! Declaration of ws_scheme_sca and ws_scheme_mom added (moved from advec_ws).
169	!
170	! 667 2010-12-23 12:06:00Z suehring/gryschka
171	! Exchange of parameters between ocean and atmosphere via PE0
172	! Check for illegal combination of ws-scheme and timestep scheme.
173	! Check for topography and ws-scheme.
174	! Check for not cyclic boundary conditions in combination with ws-scheme and
175	! loop_optimization = 'vector'.
176	! Check for call_psolver_at_all_substeps and ws-scheme for momentum_advec.
177	! Different processor/grid topology in atmosphere and ocean is now allowed!
178	! Bugfixes in checking for conserve_volume_flow_mode
179	! 600 2010-11-24 16:10:51Z raasch
180	! change due to new default value of surface_waterflux
181	! 580 2010-10-05 13:59:11Z heinze
182	! renaming of ws_vertical_gradient_level to subs_vertical_gradient_level
183	!
184	! 567 2010-10-01 10:46:30Z helmke
185	! calculating masks changed
186	!
187	! 564 2010-09-30 13:18:59Z helmke
188	! palm message identifiers of masked output changed, 20 replaced by max_masks
189	!
190	! 553 2010-09-01 14:09:06Z weinreis
191	! masks is calculated and removed from inipar
192	!
193	! 531 2010-04-21 06:47:21Z heinze
194	! Bugfix: unit of hyp changed to dbar
195	!
196	! 524 2010-03-30 02:04:51Z raasch
197	! Bugfix: "/" in netcdf profile variable names replaced by ":"
198	!
199	! 493 2010-03-01 08:30:24Z raasch
200	! netcdf_data_format is checked
201	!
202	! 411 2009-12-11 14:15:58Z heinze
203	! Enabled passive scalar/humidity wall fluxes for non-flat topography
204	! Initialization of large scale vertical motion (subsidence/ascent)
205	!
206	! 410 2009-12-04 17:05:40Z letzel
207	! masked data output
208	!
209	! 388 2009-09-23 09:40:33Z raasch
210	! Check profiles fpr prho and hyp.
211	! Bugfix: output of averaged 2d/3d quantities requires that an avaraging
212	! interval has been set, respective error message is included
213	! bc_lr_cyc and bc_ns_cyc are set,
214	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
215	! Check for illegal entries in section_xy\|xz\|yz that exceed nz+1\|ny+1\|nx+1
216	! Coupling with independent precursor runs.
217	! Check particle_color, particle_dvrpsize, color_interval, dvrpsize_interval
218	! Bugfix: pressure included for profile output
219	! Check pressure gradient conditions
220	! topography_grid_convention moved from user_check_parameters
221	! 'single_street_canyon'
222	! Added shf* and qsws* to the list of available output data
223	!
224	! 222 2009-01-12 16:04:16Z letzel
225	! +user_check_parameters
226	! Output of messages replaced by message handling routine.
227	! Implementation of an MPI-1 coupling: replaced myid with target_id,
228	! deleted __mpi2 directives
229	! Check that PALM is called with mrun -K parallel for coupling
230	!
231	! 197 2008-09-16 15:29:03Z raasch
232	! Bug fix: Construction of vertical profiles when 10 gradients have been
233	! specified in the parameter list (ug, vg, pt, q, sa, lad)
234	!
235	! Strict grid matching along z is not needed for mg-solver.
236	! Leaf area density (LAD) explicitly set to its surface value at k=0
237	! Case of reading data for recycling included in initializing_actions,
238	! check of turbulent_inflow and calculation of recycling_plane.
239	! q*2 profile added
240	!
241	! 138 2007-11-28 10:03:58Z letzel
242	! Plant canopy added
243	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
244	! Multigrid solver allows topography, checking of dt_sort_particles
245	! Bugfix: initializing u_init and v_init in case of ocean runs
246	!
247	! 109 2007-08-28 15:26:47Z letzel
248	! Check coupling_mode and set default (obligatory) values (like boundary
249	! conditions for temperature and fluxes) in case of coupled runs.
250	! +profiles for wp and w"e
251	! Bugfix: Error message concerning output of particle concentration (pc)
252	! modified
253	! More checks and more default values for coupled runs
254	! allow data_output_pr= q, wq, w"q", wq for humidity = .T. (instead of
255	! cloud_physics = .T.)
256	! Rayleigh damping for ocean fixed.
257	! Check and, if necessary, set default value for dt_coupling
258	!
259	! 97 2007-06-21 08:23:15Z raasch
260	! Initial salinity profile is calculated, salinity boundary conditions are
261	! checked,
262	! z_max_do1d is checked only in case of ocean = .f.,
263	! +initial temperature and geostrophic velocity profiles for the ocean version,
264	! use_pt_reference renamed use_reference
265	!
266	! 89 2007-05-25 12:08:31Z raasch
267	! Check for user-defined profiles
268	!
269	! 75 2007-03-22 09:54:05Z raasch
270	! "by_user" allowed as initializing action, -data_output_ts,
271	! leapfrog with non-flat topography not allowed any more, loop_optimization
272	! and pt_reference are checked, moisture renamed humidity,
273	! output of precipitation amount/rate and roughnes length + check
274	! possible negative humidities are avoided in initial profile,
275	! dirichlet/neumann changed to dirichlet/radiation, etc.,
276	! revision added to run_description_header
277	!
278	! 20 2007-02-26 00:12:32Z raasch
279	! Temperature and humidity gradients at top are now calculated for nzt+1,
280	! top_heatflux and respective boundary condition bc_pt_t is checked
281	!
282	! RCS Log replace by Id keyword, revision history cleaned up
283	!
284	! Revision 1.61 2006/08/04 14:20:25 raasch
285	! do2d_unit and do3d_unit now defined as 2d-arrays, check of
286	! use_upstream_for_tke, default value for dt_dopts,
287	! generation of file header moved from routines palm and header to here
288	!
289	! Revision 1.1 1997/08/26 06:29:23 raasch
290	! Initial revision
291	!
292	!
293	! Description:
294	! ------------
295	! Check control parameters and deduce further quantities.
296	!------------------------------------------------------------------------------!
297
298	USE arrays_3d
299	USE cloud_parameters
300	USE constants
301	USE control_parameters
302	USE dvrp_variables
303	USE grid_variables
304	USE indices
305	USE model_1d
306	USE netcdf_control
307	USE particle_attributes
308	USE pegrid
309	USE profil_parameter
310	USE spectrum
311	USE statistics
312	USE subsidence_mod
313	USE transpose_indices
314
315	IMPLICIT NONE
316
317	CHARACTER (LEN=1) :: sq
318	CHARACTER (LEN=6) :: var
319	CHARACTER (LEN=7) :: unit
320	CHARACTER (LEN=8) :: date
321	CHARACTER (LEN=10) :: time
322	CHARACTER (LEN=40) :: coupling_string
323	CHARACTER (LEN=100) :: action
324
325	INTEGER :: i, ilen, iremote = 0, j, k, kk, position, prec
326	LOGICAL :: found, ldum
327	REAL :: gradient, remote = 0.0, simulation_time_since_reference
328
329	!
330	!-- Check for overlap combinations, which are not realized yet
331	IF ( transpose_compute_overlap ) THEN
332	IF ( numprocs == 1 ) STOP '+++ transpose-compute-overlap not implemented for single PE runs'
333	#if defined( __openacc )
334	STOP '+++ transpose-compute-overlap not implemented for GPU usage'
335	#endif
336	ENDIF
337
338	!
339	!-- Warning, if host is not set
340	IF ( host(1:1) == ' ' ) THEN
341	message_string = '"host" is not set. Please check that environment ' // &
342	'variable "localhost" & is set before running PALM'
343	CALL message( 'check_parameters', 'PA0001', 0, 0, 0, 6, 0 )
344	ENDIF
345
346	!
347	!-- Check the coupling mode
348	IF ( coupling_mode /= 'uncoupled' .AND. &
349	coupling_mode /= 'atmosphere_to_ocean' .AND. &
350	coupling_mode /= 'ocean_to_atmosphere' ) THEN
351	message_string = 'illegal coupling mode: ' // TRIM( coupling_mode )
352	CALL message( 'check_parameters', 'PA0002', 1, 2, 0, 6, 0 )
353	ENDIF
354
355	!
356	!-- Check dt_coupling, restart_time, dt_restart, end_time, dx, dy, nx and ny
357	IF ( coupling_mode /= 'uncoupled') THEN
358
359	IF ( dt_coupling == 9999999.9 ) THEN
360	message_string = 'dt_coupling is not set but required for coup' // &
361	'ling mode "' // TRIM( coupling_mode ) // '"'
362	CALL message( 'check_parameters', 'PA0003', 1, 2, 0, 6, 0 )
363	ENDIF
364
365	#if defined( __parallel )
366
367	!
368	!-- NOTE: coupled runs have not been implemented in the check_namelist_files
369	!-- program.
370	!-- check_namelist_files will need the following information of the other
371	!-- model (atmosphere/ocean).
372	! dt_coupling = remote
373	! dt_max = remote
374	! restart_time = remote
375	! dt_restart= remote
376	! simulation_time_since_reference = remote
377	! dx = remote
378
379
380	#if ! defined( __check )
381	IF ( myid == 0 ) THEN
382	CALL MPI_SEND( dt_coupling, 1, MPI_REAL, target_id, 11, comm_inter, &
383	ierr )
384	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 11, comm_inter, &
385	status, ierr )
386	ENDIF
387	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
388	#endif
389	IF ( dt_coupling /= remote ) THEN
390	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
391	'": dt_coupling = ', dt_coupling, '& is not equal to ', &
392	'dt_coupling_remote = ', remote
393	CALL message( 'check_parameters', 'PA0004', 1, 2, 0, 6, 0 )
394	ENDIF
395	IF ( dt_coupling <= 0.0 ) THEN
396	#if ! defined( __check )
397	IF ( myid == 0 ) THEN
398	CALL MPI_SEND( dt_max, 1, MPI_REAL, target_id, 19, comm_inter, ierr )
399	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 19, comm_inter, &
400	status, ierr )
401	ENDIF
402	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
403	#endif
404	dt_coupling = MAX( dt_max, remote )
405	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
406	'": dt_coupling <= 0.0 & is not allowed and is reset to ', &
407	'MAX(dt_max(A,O)) = ', dt_coupling
408	CALL message( 'check_parameters', 'PA0005', 0, 1, 0, 6, 0 )
409	ENDIF
410	#if ! defined( __check )
411	IF ( myid == 0 ) THEN
412	CALL MPI_SEND( restart_time, 1, MPI_REAL, target_id, 12, comm_inter, &
413	ierr )
414	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 12, comm_inter, &
415	status, ierr )
416	ENDIF
417	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
418	#endif
419	IF ( restart_time /= remote ) THEN
420	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
421	'": restart_time = ', restart_time, '& is not equal to ', &
422	'restart_time_remote = ', remote
423	CALL message( 'check_parameters', 'PA0006', 1, 2, 0, 6, 0 )
424	ENDIF
425	#if ! defined( __check )
426	IF ( myid == 0 ) THEN
427	CALL MPI_SEND( dt_restart, 1, MPI_REAL, target_id, 13, comm_inter, &
428	ierr )
429	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 13, comm_inter, &
430	status, ierr )
431	ENDIF
432	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
433	#endif
434	IF ( dt_restart /= remote ) THEN
435	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
436	'": dt_restart = ', dt_restart, '& is not equal to ', &
437	'dt_restart_remote = ', remote
438	CALL message( 'check_parameters', 'PA0007', 1, 2, 0, 6, 0 )
439	ENDIF
440
441	simulation_time_since_reference = end_time - coupling_start_time
442	#if ! defined( __check )
443	IF ( myid == 0 ) THEN
444	CALL MPI_SEND( simulation_time_since_reference, 1, MPI_REAL, target_id, &
445	14, comm_inter, ierr )
446	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 14, comm_inter, &
447	status, ierr )
448	ENDIF
449	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
450	#endif
451	IF ( simulation_time_since_reference /= remote ) THEN
452	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
453	'": simulation_time_since_reference = ', &
454	simulation_time_since_reference, '& is not equal to ', &
455	'simulation_time_since_reference_remote = ', remote
456	CALL message( 'check_parameters', 'PA0008', 1, 2, 0, 6, 0 )
457	ENDIF
458
459	#if ! defined( __check )
460	IF ( myid == 0 ) THEN
461	CALL MPI_SEND( dx, 1, MPI_REAL, target_id, 15, comm_inter, ierr )
462	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 15, comm_inter, &
463	status, ierr )
464	ENDIF
465	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
466
467	#endif
468	IF ( coupling_mode == 'atmosphere_to_ocean') THEN
469
470	IF ( dx < remote ) THEN
471	WRITE( message_string, * ) 'coupling mode "', &
472	TRIM( coupling_mode ), &
473	'": dx in Atmosphere is not equal to or not larger then dx in ocean'
474	CALL message( 'check_parameters', 'PA0009', 1, 2, 0, 6, 0 )
475	ENDIF
476
477	IF ( (nx_a+1)dx /= (nx_o+1)remote ) THEN
478	WRITE( message_string, * ) 'coupling mode "', &
479	TRIM( coupling_mode ), &
480	'": Domain size in x-direction is not equal in ocean and atmosphere'
481	CALL message( 'check_parameters', 'PA0010', 1, 2, 0, 6, 0 )
482	ENDIF
483
484	ENDIF
485
486	#if ! defined( __check )
487	IF ( myid == 0) THEN
488	CALL MPI_SEND( dy, 1, MPI_REAL, target_id, 16, comm_inter, ierr )
489	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 16, comm_inter, &
490	status, ierr )
491	ENDIF
492	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
493	#endif
494	IF ( coupling_mode == 'atmosphere_to_ocean') THEN
495
496	IF ( dy < remote ) THEN
497	WRITE( message_string, * ) 'coupling mode "', &
498	TRIM( coupling_mode ), &
499	'": dy in Atmosphere is not equal to or not larger then dy in ocean'
500	CALL message( 'check_parameters', 'PA0011', 1, 2, 0, 6, 0 )
501	ENDIF
502
503	IF ( (ny_a+1)dy /= (ny_o+1)remote ) THEN
504	WRITE( message_string, * ) 'coupling mode "', &
505	TRIM( coupling_mode ), &
506	'": Domain size in y-direction is not equal in ocean and atmosphere'
507	CALL message( 'check_parameters', 'PA0012', 1, 2, 0, 6, 0 )
508	ENDIF
509
510	IF ( MOD(nx_o+1,nx_a+1) /= 0 ) THEN
511	WRITE( message_string, * ) 'coupling mode "', &
512	TRIM( coupling_mode ), &
513	'": nx+1 in ocean is not divisible without remainder with nx+1 in', &
514	' atmosphere'
515	CALL message( 'check_parameters', 'PA0339', 1, 2, 0, 6, 0 )
516	ENDIF
517
518	IF ( MOD(ny_o+1,ny_a+1) /= 0 ) THEN
519	WRITE( message_string, * ) 'coupling mode "', &
520	TRIM( coupling_mode ), &
521	'": ny+1 in ocean is not divisible without remainder with ny+1 in', &
522	' atmosphere'
523	CALL message( 'check_parameters', 'PA0340', 1, 2, 0, 6, 0 )
524	ENDIF
525
526	ENDIF
527	#else
528	WRITE( message_string, * ) 'coupling requires PALM to be called with', &
529	' ''mrun -K parallel'''
530	CALL message( 'check_parameters', 'PA0141', 1, 2, 0, 6, 0 )
531	#endif
532	ENDIF
533
534	#if defined( __parallel ) && ! defined ( __check )
535	!
536	!-- Exchange via intercommunicator
537	IF ( coupling_mode == 'atmosphere_to_ocean' .AND. myid == 0 ) THEN
538	CALL MPI_SEND( humidity, 1, MPI_LOGICAL, target_id, 19, comm_inter, &
539	ierr )
540	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' .AND. myid == 0) THEN
541	CALL MPI_RECV( humidity_remote, 1, MPI_LOGICAL, target_id, 19, &
542	comm_inter, status, ierr )
543	ENDIF
544	CALL MPI_BCAST( humidity_remote, 1, MPI_LOGICAL, 0, comm2d, ierr)
545
546	#endif
547
548
549	!
550	!-- Generate the file header which is used as a header for most of PALM's
551	!-- output files
552	CALL DATE_AND_TIME( date, time )
553	run_date = date(7:8)//'-'//date(5:6)//'-'//date(3:4)
554	run_time = time(1:2)//':'//time(3:4)//':'//time(5:6)
555	IF ( coupling_mode == 'uncoupled' ) THEN
556	coupling_string = ''
557	ELSEIF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
558	coupling_string = ' coupled (atmosphere)'
559	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
560	coupling_string = ' coupled (ocean)'
561	ENDIF
562
563	WRITE ( run_description_header, &
564	'(A,2X,A,2X,A,A,A,I2.2,A,2X,A,A,2X,A,1X,A)' ) &
565	TRIM( version ), TRIM( revision ), 'run: ', &
566	TRIM( run_identifier ), '.', runnr, TRIM( coupling_string ), &
567	'host: ', TRIM( host ), run_date, run_time
568
569	!
570	!-- Check the general loop optimization method
571	IF ( loop_optimization == 'default' ) THEN
572	IF ( host(1:3) == 'nec' ) THEN
573	loop_optimization = 'vector'
574	ELSE
575	loop_optimization = 'cache'
576	ENDIF
577	ENDIF
578
579	SELECT CASE ( TRIM( loop_optimization ) )
580
581	CASE ( 'acc', 'cache', 'vector' )
582	CONTINUE
583
584	CASE DEFAULT
585	message_string = 'illegal value given for loop_optimization: "' // &
586	TRIM( loop_optimization ) // '"'
587	CALL message( 'check_parameters', 'PA0013', 1, 2, 0, 6, 0 )
588
589	END SELECT
590
591	!
592	!-- Check if vertical grid stretching is used together with particles
593	IF ( dz_stretch_level < 100000.0 .AND. particle_advection ) THEN
594	message_string = 'Vertical grid stretching is not allowed together ' // &
595	'with particle advection.'
596	CALL message( 'check_parameters', 'PA0017', 1, 2, 0, 6, 0 )
597	ENDIF
598
599	!
600	!-- Check topography setting (check for illegal parameter combinations)
601	IF ( topography /= 'flat' ) THEN
602	action = ' '
603	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'ws-scheme') THEN
604	WRITE( action, '(A,A)' ) 'scalar_advec = ', scalar_advec
605	ENDIF
606	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme' ) &
607	THEN
608	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
609	ENDIF
610	IF ( psolver == 'sor' ) THEN
611	WRITE( action, '(A,A)' ) 'psolver = ', psolver
612	ENDIF
613	IF ( sloping_surface ) THEN
614	WRITE( action, '(A)' ) 'sloping surface = .TRUE.'
615	ENDIF
616	IF ( galilei_transformation ) THEN
617	WRITE( action, '(A)' ) 'galilei_transformation = .TRUE.'
618	ENDIF
619	IF ( cloud_physics ) THEN
620	WRITE( action, '(A)' ) 'cloud_physics = .TRUE.'
621	ENDIF
622	IF ( cloud_droplets ) THEN
623	WRITE( action, '(A)' ) 'cloud_droplets = .TRUE.'
624	ENDIF
625	IF ( .NOT. prandtl_layer ) THEN
626	WRITE( action, '(A)' ) 'prandtl_layer = .FALSE.'
627	ENDIF
628	IF ( action /= ' ' ) THEN
629	message_string = 'a non-flat topography does not allow ' // &
630	TRIM( action )
631	CALL message( 'check_parameters', 'PA0014', 1, 2, 0, 6, 0 )
632	ENDIF
633	!
634	!-- In case of non-flat topography, check whether the convention how to
635	!-- define the topography grid has been set correctly, or whether the default
636	!-- is applicable. If this is not possible, abort.
637	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
638	IF ( TRIM( topography ) /= 'single_building' .AND. &
639	TRIM( topography ) /= 'single_street_canyon' .AND. &
640	TRIM( topography ) /= 'read_from_file' ) THEN
641	!-- The default value is not applicable here, because it is only valid
642	!-- for the two standard cases 'single_building' and 'read_from_file'
643	!-- defined in init_grid.
644	WRITE( message_string, * ) &
645	'The value for "topography_grid_convention" ', &
646	'is not set. Its default value is & only valid for ', &
647	'"topography" = ''single_building'', ', &
648	'''single_street_canyon'' & or ''read_from_file''.', &
649	' & Choose ''cell_edge'' or ''cell_center''.'
650	CALL message( 'user_check_parameters', 'PA0239', 1, 2, 0, 6, 0 )
651	ELSE
652	!-- The default value is applicable here.
653	!-- Set convention according to topography.
654	IF ( TRIM( topography ) == 'single_building' .OR. &
655	TRIM( topography ) == 'single_street_canyon' ) THEN
656	topography_grid_convention = 'cell_edge'
657	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
658	topography_grid_convention = 'cell_center'
659	ENDIF
660	ENDIF
661	ELSEIF ( TRIM( topography_grid_convention ) /= 'cell_edge' .AND. &
662	TRIM( topography_grid_convention ) /= 'cell_center' ) THEN
663	WRITE( message_string, * ) &
664	'The value for "topography_grid_convention" is ', &
665	'not recognized. & Choose ''cell_edge'' or ''cell_center''.'
666	CALL message( 'user_check_parameters', 'PA0240', 1, 2, 0, 6, 0 )
667	ENDIF
668
669	ENDIF
670
671	!
672	!-- Check ocean setting
673	IF ( ocean ) THEN
674
675	action = ' '
676	IF ( action /= ' ' ) THEN
677	message_string = 'ocean = .T. does not allow ' // TRIM( action )
678	CALL message( 'check_parameters', 'PA0015', 1, 2, 0, 6, 0 )
679	ENDIF
680
681	ELSEIF ( TRIM( coupling_mode ) == 'uncoupled' .AND. &
682	TRIM( coupling_char ) == '_O' ) THEN
683
684	!
685	!-- Check whether an (uncoupled) atmospheric run has been declared as an
686	!-- ocean run (this setting is done via mrun-option -y)
687
688	message_string = 'ocean = .F. does not allow coupling_char = "' // &
689	TRIM( coupling_char ) // '" set by mrun-option "-y"'
690	CALL message( 'check_parameters', 'PA0317', 1, 2, 0, 6, 0 )
691
692	ENDIF
693	!
694	!-- Check cloud scheme
695	IF ( cloud_scheme == 'seifert_beheng' ) THEN
696	icloud_scheme = 0
697	ELSEIF ( cloud_scheme == 'kessler' ) THEN
698	icloud_scheme = 1
699	ELSE
700	message_string = 'unknown cloud microphysics scheme cloud_scheme ="' // &
701	TRIM( cloud_scheme ) // '"'
702	CALL message( 'check_parameters', 'PA0357', 1, 2, 0, 6, 0 )
703	ENDIF
704	!
705	!-- Check whether there are any illegal values
706	!-- Pressure solver:
707	IF ( psolver /= 'poisfft' .AND. &
708	psolver /= 'sor' .AND. psolver /= 'multigrid' ) THEN
709	message_string = 'unknown solver for perturbation pressure: psolver' // &
710	' = "' // TRIM( psolver ) // '"'
711	CALL message( 'check_parameters', 'PA0016', 1, 2, 0, 6, 0 )
712	ENDIF
713
714	IF ( psolver == 'multigrid' ) THEN
715	IF ( cycle_mg == 'w' ) THEN
716	gamma_mg = 2
717	ELSEIF ( cycle_mg == 'v' ) THEN
718	gamma_mg = 1
719	ELSE
720	message_string = 'unknown multigrid cycle: cycle_mg = "' // &
721	TRIM( cycle_mg ) // '"'
722	CALL message( 'check_parameters', 'PA0020', 1, 2, 0, 6, 0 )
723	ENDIF
724	ENDIF
725
726	IF ( fft_method /= 'singleton-algorithm' .AND. &
727	fft_method /= 'temperton-algorithm' .AND. &
728	fft_method /= 'fftw' .AND. &
729	fft_method /= 'system-specific' ) THEN
730	message_string = 'unknown fft-algorithm: fft_method = "' // &
731	TRIM( fft_method ) // '"'
732	CALL message( 'check_parameters', 'PA0021', 1, 2, 0, 6, 0 )
733	ENDIF
734
735	IF( momentum_advec == 'ws-scheme' .AND. &
736	.NOT. call_psolver_at_all_substeps ) THEN
737	message_string = 'psolver must be called at each RK3 substep when "'//&
738	TRIM(momentum_advec) // ' "is used for momentum_advec'
739	CALL message( 'check_parameters', 'PA0344', 1, 2, 0, 6, 0 )
740	END IF
741	!
742	!-- Advection schemes:
743	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme' ) &
744	THEN
745	message_string = 'unknown advection scheme: momentum_advec = "' // &
746	TRIM( momentum_advec ) // '"'
747	CALL message( 'check_parameters', 'PA0022', 1, 2, 0, 6, 0 )
748	ENDIF
749	IF ( ( momentum_advec == 'ws-scheme' .OR. scalar_advec == 'ws-scheme' ) &
750	.AND. ( timestep_scheme == 'euler' .OR. &
751	timestep_scheme == 'runge-kutta-2' ) ) &
752	THEN
753	message_string = 'momentum_advec or scalar_advec = "' &
754	// TRIM( momentum_advec ) // '" is not allowed with timestep_scheme = "' // &
755	TRIM( timestep_scheme ) // '"'
756	CALL message( 'check_parameters', 'PA0023', 1, 2, 0, 6, 0 )
757	ENDIF
758	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'ws-scheme' .AND. &
759	scalar_advec /= 'bc-scheme' ) &
760	THEN
761	message_string = 'unknown advection scheme: scalar_advec = "' // &
762	TRIM( scalar_advec ) // '"'
763	CALL message( 'check_parameters', 'PA0024', 1, 2, 0, 6, 0 )
764	ENDIF
765	IF ( scalar_advec == 'bc-scheme' .AND. loop_optimization == 'cache' ) &
766	THEN
767	message_string = 'advection_scheme scalar_advec = "' &
768	// TRIM( scalar_advec ) // '" not implemented for & loop_optimization = "' // &
769	TRIM( loop_optimization ) // '"'
770	CALL message( 'check_parameters', 'PA0026', 1, 2, 0, 6, 0 )
771	ENDIF
772
773	IF ( use_sgs_for_particles .AND. .NOT. use_upstream_for_tke ) THEN
774	use_upstream_for_tke = .TRUE.
775	message_string = 'use_upstream_for_tke set .TRUE. because ' // &
776	'use_sgs_for_particles = .TRUE.'
777	CALL message( 'check_parameters', 'PA0025', 0, 1, 0, 6, 0 )
778	ENDIF
779
780	IF ( use_sgs_for_particles .AND. curvature_solution_effects ) THEN
781	message_string = 'use_sgs_for_particles = .TRUE. not allowed with ' // &
782	'curvature_solution_effects = .TRUE.'
783	CALL message( 'check_parameters', 'PA0349', 1, 2, 0, 6, 0 )
784	ENDIF
785
786	!
787	!-- Set LOGICAL switches to enhance performance
788	IF ( momentum_advec == 'ws-scheme' ) ws_scheme_mom = .TRUE.
789	IF ( scalar_advec == 'ws-scheme' ) ws_scheme_sca = .TRUE.
790
791	!
792	!-- Timestep schemes:
793	SELECT CASE ( TRIM( timestep_scheme ) )
794
795	CASE ( 'euler' )
796	intermediate_timestep_count_max = 1
797
798	CASE ( 'runge-kutta-2' )
799	intermediate_timestep_count_max = 2
800
801	CASE ( 'runge-kutta-3' )
802	intermediate_timestep_count_max = 3
803
804	CASE DEFAULT
805	message_string = 'unknown timestep scheme: timestep_scheme = "' // &
806	TRIM( timestep_scheme ) // '"'
807	CALL message( 'check_parameters', 'PA0027', 1, 2, 0, 6, 0 )
808
809	END SELECT
810
811	IF ( (momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme') &
812	.AND. timestep_scheme(1:5) == 'runge' ) THEN
813	message_string = 'momentum advection scheme "' // &
814	TRIM( momentum_advec ) // '" & does not work with ' // &
815	'timestep_scheme "' // TRIM( timestep_scheme ) // '"'
816	CALL message( 'check_parameters', 'PA0029', 1, 2, 0, 6, 0 )
817	ENDIF
818
819	!
820	!-- Collision kernels:
821	SELECT CASE ( TRIM( collision_kernel ) )
822
823	CASE ( 'hall', 'hall_fast' )
824	hall_kernel = .TRUE.
825
826	CASE ( 'palm' )
827	palm_kernel = .TRUE.
828
829	CASE ( 'wang', 'wang_fast' )
830	wang_kernel = .TRUE.
831
832	CASE ( 'none' )
833
834
835	CASE DEFAULT
836	message_string = 'unknown collision kernel: collision_kernel = "' // &
837	TRIM( collision_kernel ) // '"'
838	CALL message( 'check_parameters', 'PA0350', 1, 2, 0, 6, 0 )
839
840	END SELECT
841	IF ( collision_kernel(6:9) == 'fast' ) use_kernel_tables = .TRUE.
842
843	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
844	TRIM( initializing_actions ) /= 'cyclic_fill' ) THEN
845	!
846	!-- No restart run: several initialising actions are possible
847	action = initializing_actions
848	DO WHILE ( TRIM( action ) /= '' )
849	position = INDEX( action, ' ' )
850	SELECT CASE ( action(1:position-1) )
851
852	CASE ( 'set_constant_profiles', 'set_1d-model_profiles', &
853	'by_user', 'initialize_vortex', 'initialize_ptanom' )
854	action = action(position+1:)
855
856	CASE DEFAULT
857	message_string = 'initializing_action = "' // &
858	TRIM( action ) // '" unkown or not allowed'
859	CALL message( 'check_parameters', 'PA0030', 1, 2, 0, 6, 0 )
860
861	END SELECT
862	ENDDO
863	ENDIF
864
865	IF ( TRIM( initializing_actions ) == 'initialize_vortex' .AND. &
866	conserve_volume_flow ) THEN
867	message_string = 'initializing_actions = "initialize_vortex"' // &
868	' ist not allowed with conserve_volume_flow = .T.'
869	CALL message( 'check_parameters', 'PA0343', 1, 2, 0, 6, 0 )
870	ENDIF
871
872
873	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
874	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
875	message_string = 'initializing_actions = "set_constant_profiles"' // &
876	' and "set_1d-model_profiles" are not allowed ' // &
877	'simultaneously'
878	CALL message( 'check_parameters', 'PA0031', 1, 2, 0, 6, 0 )
879	ENDIF
880
881	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
882	INDEX( initializing_actions, 'by_user' ) /= 0 ) THEN
883	message_string = 'initializing_actions = "set_constant_profiles"' // &
884	' and "by_user" are not allowed simultaneously'
885	CALL message( 'check_parameters', 'PA0032', 1, 2, 0, 6, 0 )
886	ENDIF
887
888	IF ( INDEX( initializing_actions, 'by_user' ) /= 0 .AND. &
889	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
890	message_string = 'initializing_actions = "by_user" and ' // &
891	'"set_1d-model_profiles" are not allowed simultaneously'
892	CALL message( 'check_parameters', 'PA0033', 1, 2, 0, 6, 0 )
893	ENDIF
894
895	IF ( cloud_physics .AND. .NOT. humidity ) THEN
896	WRITE( message_string, * ) 'cloud_physics = ', cloud_physics, ' is ', &
897	'not allowed with humidity = ', humidity
898	CALL message( 'check_parameters', 'PA0034', 1, 2, 0, 6, 0 )
899	ENDIF
900
901	IF ( precipitation .AND. .NOT. cloud_physics ) THEN
902	WRITE( message_string, * ) 'precipitation = ', precipitation, ' is ', &
903	'not allowed with cloud_physics = ', cloud_physics
904	CALL message( 'check_parameters', 'PA0035', 1, 2, 0, 6, 0 )
905	ENDIF
906
907	IF ( humidity .AND. sloping_surface ) THEN
908	message_string = 'humidity = .TRUE. and sloping_surface = .TRUE. ' // &
909	'are not allowed simultaneously'
910	CALL message( 'check_parameters', 'PA0036', 1, 2, 0, 6, 0 )
911	ENDIF
912
913	IF ( passive_scalar .AND. humidity ) THEN
914	message_string = 'humidity = .TRUE. and passive_scalar = .TRUE. ' // &
915	'is not allowed simultaneously'
916	CALL message( 'check_parameters', 'PA0038', 1, 2, 0, 6, 0 )
917	ENDIF
918
919	IF ( plant_canopy .AND. ( drag_coefficient == 0.0 ) ) THEN
920	message_string = 'plant_canopy = .TRUE. requires a non-zero drag ' // &
921	'coefficient & given value is drag_coefficient = 0.0'
922	CALL message( 'check_parameters', 'PA0041', 1, 2, 0, 6, 0 )
923	ENDIF
924
925	IF ( plant_canopy .AND. cloud_physics .AND. icloud_scheme == 0 ) THEN
926	message_string = 'plant_canopy = .TRUE. requires cloud_scheme /=' // &
927	' seifert_beheng'
928	CALL message( 'check_parameters', 'PA0360', 1, 2, 0, 6, 0 )
929	ENDIF
930
931	IF ( loop_optimization /= 'cache' .AND. cloud_physics .AND. &
932	icloud_scheme == 0 ) THEN
933	message_string = 'cloud_scheme = seifert_beheng requires ' // &
934	'loop_optimization = cache'
935	CALL message( 'check_parameters', 'PA0362', 1, 2, 0, 6, 0 )
936	ENDIF
937
938	! IF ( cloud_physics .AND. icloud_scheme == 0 .AND. &
939	! .NOT. precipitation .AND. .NOT. drizzle ) THEN
940	! message_string = 'cloud_scheme = seifert_beheng requires ' // &
941	! 'precipitation = .TRUE. or drizzle = .TRUE.'
942	! CALL message( 'check_parameters', 'PA0363', 1, 2, 0, 6, 0 )
943	! ENDIF
944
945	!
946	!-- In case of no model continuation run, check initialising parameters and
947	!-- deduce further quantities
948	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
949
950	!
951	!-- Initial profiles for 1D and 3D model, respectively (u,v further below)
952	pt_init = pt_surface
953	IF ( humidity ) THEN
954	q_init = q_surface
955	ENDIF
956	IF ( ocean ) sa_init = sa_surface
957	IF ( passive_scalar ) q_init = s_surface
958	IF ( plant_canopy ) lad = 0.0
959
960	!
961	!--
962	!-- If required, compute initial profile of the geostrophic wind
963	!-- (component ug)
964	i = 1
965	gradient = 0.0
966
967	IF ( .NOT. ocean ) THEN
968
969	ug_vertical_gradient_level_ind(1) = 0
970	ug(0) = ug_surface
971	DO k = 1, nzt+1
972	IF ( i < 11 ) THEN
973	IF ( ug_vertical_gradient_level(i) < zu(k) .AND. &
974	ug_vertical_gradient_level(i) >= 0.0 ) THEN
975	gradient = ug_vertical_gradient(i) / 100.0
976	ug_vertical_gradient_level_ind(i) = k - 1
977	i = i + 1
978	ENDIF
979	ENDIF
980	IF ( gradient /= 0.0 ) THEN
981	IF ( k /= 1 ) THEN
982	ug(k) = ug(k-1) + dzu(k) * gradient
983	ELSE
984	ug(k) = ug_surface + dzu(k) * gradient
985	ENDIF
986	ELSE
987	ug(k) = ug(k-1)
988	ENDIF
989	ENDDO
990
991	ELSE
992
993	ug_vertical_gradient_level_ind(1) = nzt+1
994	ug(nzt+1) = ug_surface
995	DO k = nzt, nzb, -1
996	IF ( i < 11 ) THEN
997	IF ( ug_vertical_gradient_level(i) > zu(k) .AND. &
998	ug_vertical_gradient_level(i) <= 0.0 ) THEN
999	gradient = ug_vertical_gradient(i) / 100.0
1000	ug_vertical_gradient_level_ind(i) = k + 1
1001	i = i + 1
1002	ENDIF
1003	ENDIF
1004	IF ( gradient /= 0.0 ) THEN
1005	IF ( k /= nzt ) THEN
1006	ug(k) = ug(k+1) - dzu(k+1) * gradient
1007	ELSE
1008	ug(k) = ug_surface - 0.5 * dzu(k+1) * gradient
1009	ug(k+1) = ug_surface + 0.5 * dzu(k+1) * gradient
1010	ENDIF
1011	ELSE
1012	ug(k) = ug(k+1)
1013	ENDIF
1014	ENDDO
1015
1016	ENDIF
1017
1018	!
1019	!-- In case of no given gradients for ug, choose a zero gradient
1020	IF ( ug_vertical_gradient_level(1) == -9999999.9 ) THEN
1021	ug_vertical_gradient_level(1) = 0.0
1022	ENDIF
1023
1024	!
1025	!--
1026	!-- If required, compute initial profile of the geostrophic wind
1027	!-- (component vg)
1028	i = 1
1029	gradient = 0.0
1030
1031	IF ( .NOT. ocean ) THEN
1032
1033	vg_vertical_gradient_level_ind(1) = 0
1034	vg(0) = vg_surface
1035	DO k = 1, nzt+1
1036	IF ( i < 11 ) THEN
1037	IF ( vg_vertical_gradient_level(i) < zu(k) .AND. &
1038	vg_vertical_gradient_level(i) >= 0.0 ) THEN
1039	gradient = vg_vertical_gradient(i) / 100.0
1040	vg_vertical_gradient_level_ind(i) = k - 1
1041	i = i + 1
1042	ENDIF
1043	ENDIF
1044	IF ( gradient /= 0.0 ) THEN
1045	IF ( k /= 1 ) THEN
1046	vg(k) = vg(k-1) + dzu(k) * gradient
1047	ELSE
1048	vg(k) = vg_surface + dzu(k) * gradient
1049	ENDIF
1050	ELSE
1051	vg(k) = vg(k-1)
1052	ENDIF
1053	ENDDO
1054
1055	ELSE
1056
1057	vg_vertical_gradient_level_ind(1) = nzt+1
1058	vg(nzt+1) = vg_surface
1059	DO k = nzt, nzb, -1
1060	IF ( i < 11 ) THEN
1061	IF ( vg_vertical_gradient_level(i) > zu(k) .AND. &
1062	vg_vertical_gradient_level(i) <= 0.0 ) THEN
1063	gradient = vg_vertical_gradient(i) / 100.0
1064	vg_vertical_gradient_level_ind(i) = k + 1
1065	i = i + 1
1066	ENDIF
1067	ENDIF
1068	IF ( gradient /= 0.0 ) THEN
1069	IF ( k /= nzt ) THEN
1070	vg(k) = vg(k+1) - dzu(k+1) * gradient
1071	ELSE
1072	vg(k) = vg_surface - 0.5 * dzu(k+1) * gradient
1073	vg(k+1) = vg_surface + 0.5 * dzu(k+1) * gradient
1074	ENDIF
1075	ELSE
1076	vg(k) = vg(k+1)
1077	ENDIF
1078	ENDDO
1079
1080	ENDIF
1081
1082	!
1083	!-- In case of no given gradients for vg, choose a zero gradient
1084	IF ( vg_vertical_gradient_level(1) == -9999999.9 ) THEN
1085	vg_vertical_gradient_level(1) = 0.0
1086	ENDIF
1087
1088	!
1089	!-- Let the initial wind profiles be the calculated ug/vg profiles or
1090	!-- interpolate them from wind profile data (if given)
1091	IF ( u_profile(1) == 9999999.9 .AND. v_profile(1) == 9999999.9 ) THEN
1092
1093	u_init = ug
1094	v_init = vg
1095
1096	ELSEIF ( u_profile(1) == 0.0 .AND. v_profile(1) == 0.0 ) THEN
1097
1098	IF ( uv_heights(1) /= 0.0 ) THEN
1099	message_string = 'uv_heights(1) must be 0.0'
1100	CALL message( 'check_parameters', 'PA0345', 1, 2, 0, 6, 0 )
1101	ENDIF
1102
1103	use_prescribed_profile_data = .TRUE.
1104
1105	kk = 1
1106	u_init(0) = 0.0
1107	v_init(0) = 0.0
1108
1109	DO k = 1, nz+1
1110
1111	IF ( kk < 100 ) THEN
1112	DO WHILE ( uv_heights(kk+1) <= zu(k) )
1113	kk = kk + 1
1114	IF ( kk == 100 ) EXIT
1115	ENDDO
1116	ENDIF
1117
1118	IF ( kk < 100 .AND. uv_heights(kk+1) /= 9999999.9 ) THEN
1119	u_init(k) = u_profile(kk) + ( zu(k) - uv_heights(kk) ) / &
1120	( uv_heights(kk+1) - uv_heights(kk) ) * &
1121	( u_profile(kk+1) - u_profile(kk) )
1122	v_init(k) = v_profile(kk) + ( zu(k) - uv_heights(kk) ) / &
1123	( uv_heights(kk+1) - uv_heights(kk) ) * &
1124	( v_profile(kk+1) - v_profile(kk) )
1125	ELSE
1126	u_init(k) = u_profile(kk)
1127	v_init(k) = v_profile(kk)
1128	ENDIF
1129
1130	ENDDO
1131
1132	ELSE
1133
1134	message_string = 'u_profile(1) and v_profile(1) must be 0.0'
1135	CALL message( 'check_parameters', 'PA0346', 1, 2, 0, 6, 0 )
1136
1137	ENDIF
1138
1139	!
1140	!-- Compute initial temperature profile using the given temperature gradients
1141	IF ( .NOT. neutral ) THEN
1142
1143	i = 1
1144	gradient = 0.0
1145
1146	IF ( .NOT. ocean ) THEN
1147
1148	pt_vertical_gradient_level_ind(1) = 0
1149	DO k = 1, nzt+1
1150	IF ( i < 11 ) THEN
1151	IF ( pt_vertical_gradient_level(i) < zu(k) .AND. &
1152	pt_vertical_gradient_level(i) >= 0.0 ) THEN
1153	gradient = pt_vertical_gradient(i) / 100.0
1154	pt_vertical_gradient_level_ind(i) = k - 1
1155	i = i + 1
1156	ENDIF
1157	ENDIF
1158	IF ( gradient /= 0.0 ) THEN
1159	IF ( k /= 1 ) THEN
1160	pt_init(k) = pt_init(k-1) + dzu(k) * gradient
1161	ELSE
1162	pt_init(k) = pt_surface + dzu(k) * gradient
1163	ENDIF
1164	ELSE
1165	pt_init(k) = pt_init(k-1)
1166	ENDIF
1167	ENDDO
1168
1169	ELSE
1170
1171	pt_vertical_gradient_level_ind(1) = nzt+1
1172	DO k = nzt, 0, -1
1173	IF ( i < 11 ) THEN
1174	IF ( pt_vertical_gradient_level(i) > zu(k) .AND. &
1175	pt_vertical_gradient_level(i) <= 0.0 ) THEN
1176	gradient = pt_vertical_gradient(i) / 100.0
1177	pt_vertical_gradient_level_ind(i) = k + 1
1178	i = i + 1
1179	ENDIF
1180	ENDIF
1181	IF ( gradient /= 0.0 ) THEN
1182	IF ( k /= nzt ) THEN
1183	pt_init(k) = pt_init(k+1) - dzu(k+1) * gradient
1184	ELSE
1185	pt_init(k) = pt_surface - 0.5 * dzu(k+1) * gradient
1186	pt_init(k+1) = pt_surface + 0.5 * dzu(k+1) * gradient
1187	ENDIF
1188	ELSE
1189	pt_init(k) = pt_init(k+1)
1190	ENDIF
1191	ENDDO
1192
1193	ENDIF
1194
1195	ENDIF
1196
1197	!
1198	!-- In case of no given temperature gradients, choose gradient of neutral
1199	!-- stratification
1200	IF ( pt_vertical_gradient_level(1) == -9999999.9 ) THEN
1201	pt_vertical_gradient_level(1) = 0.0
1202	ENDIF
1203
1204	!
1205	!-- Store temperature gradient at the top boundary for possible Neumann
1206	!-- boundary condition
1207	bc_pt_t_val = ( pt_init(nzt+1) - pt_init(nzt) ) / dzu(nzt+1)
1208
1209	!
1210	!-- If required, compute initial humidity or scalar profile using the given
1211	!-- humidity/scalar gradient. In case of scalar transport, initially store
1212	!-- values of the scalar parameters on humidity parameters
1213	IF ( passive_scalar ) THEN
1214	bc_q_b = bc_s_b
1215	bc_q_t = bc_s_t
1216	q_surface = s_surface
1217	q_surface_initial_change = s_surface_initial_change
1218	q_vertical_gradient = s_vertical_gradient
1219	q_vertical_gradient_level = s_vertical_gradient_level
1220	surface_waterflux = surface_scalarflux
1221	wall_humidityflux = wall_scalarflux
1222	ENDIF
1223
1224	IF ( humidity .OR. passive_scalar ) THEN
1225
1226	i = 1
1227	gradient = 0.0
1228	q_vertical_gradient_level_ind(1) = 0
1229	DO k = 1, nzt+1
1230	IF ( i < 11 ) THEN
1231	IF ( q_vertical_gradient_level(i) < zu(k) .AND. &
1232	q_vertical_gradient_level(i) >= 0.0 ) THEN
1233	gradient = q_vertical_gradient(i) / 100.0
1234	q_vertical_gradient_level_ind(i) = k - 1
1235	i = i + 1
1236	ENDIF
1237	ENDIF
1238	IF ( gradient /= 0.0 ) THEN
1239	IF ( k /= 1 ) THEN
1240	q_init(k) = q_init(k-1) + dzu(k) * gradient
1241	ELSE
1242	q_init(k) = q_init(k-1) + dzu(k) * gradient
1243	ENDIF
1244	ELSE
1245	q_init(k) = q_init(k-1)
1246	ENDIF
1247	!
1248	!-- Avoid negative humidities
1249	IF ( q_init(k) < 0.0 ) THEN
1250	q_init(k) = 0.0
1251	ENDIF
1252	ENDDO
1253
1254	!
1255	!-- In case of no given humidity gradients, choose zero gradient
1256	!-- conditions
1257	IF ( q_vertical_gradient_level(1) == -1.0 ) THEN
1258	q_vertical_gradient_level(1) = 0.0
1259	ENDIF
1260	!
1261	!-- Store humidity, rain water content and rain drop concentration
1262	!-- gradient at the top boundary for possile Neumann boundary condition
1263	bc_q_t_val = ( q_init(nzt+1) - q_init(nzt) ) / dzu(nzt+1)
1264	ENDIF
1265
1266	!
1267	!-- If required, compute initial salinity profile using the given salinity
1268	!-- gradients
1269	IF ( ocean ) THEN
1270
1271	i = 1
1272	gradient = 0.0
1273
1274	sa_vertical_gradient_level_ind(1) = nzt+1
1275	DO k = nzt, 0, -1
1276	IF ( i < 11 ) THEN
1277	IF ( sa_vertical_gradient_level(i) > zu(k) .AND. &
1278	sa_vertical_gradient_level(i) <= 0.0 ) THEN
1279	gradient = sa_vertical_gradient(i) / 100.0
1280	sa_vertical_gradient_level_ind(i) = k + 1
1281	i = i + 1
1282	ENDIF
1283	ENDIF
1284	IF ( gradient /= 0.0 ) THEN
1285	IF ( k /= nzt ) THEN
1286	sa_init(k) = sa_init(k+1) - dzu(k+1) * gradient
1287	ELSE
1288	sa_init(k) = sa_surface - 0.5 * dzu(k+1) * gradient
1289	sa_init(k+1) = sa_surface + 0.5 * dzu(k+1) * gradient
1290	ENDIF
1291	ELSE
1292	sa_init(k) = sa_init(k+1)
1293	ENDIF
1294	ENDDO
1295
1296	ENDIF
1297
1298	!
1299	!-- If required compute the profile of leaf area density used in the plant
1300	!-- canopy model
1301	IF ( plant_canopy ) THEN
1302
1303	i = 1
1304	gradient = 0.0
1305
1306	IF ( .NOT. ocean ) THEN
1307
1308	lad(0) = lad_surface
1309
1310	lad_vertical_gradient_level_ind(1) = 0
1311	DO k = 1, pch_index
1312	IF ( i < 11 ) THEN
1313	IF ( lad_vertical_gradient_level(i) < zu(k) .AND. &
1314	lad_vertical_gradient_level(i) >= 0.0 ) THEN
1315	gradient = lad_vertical_gradient(i)
1316	lad_vertical_gradient_level_ind(i) = k - 1
1317	i = i + 1
1318	ENDIF
1319	ENDIF
1320	IF ( gradient /= 0.0 ) THEN
1321	IF ( k /= 1 ) THEN
1322	lad(k) = lad(k-1) + dzu(k) * gradient
1323	ELSE
1324	lad(k) = lad_surface + dzu(k) *gradient
1325	ENDIF
1326	ELSE
1327	lad(k) = lad(k-1)
1328	ENDIF
1329	ENDDO
1330
1331	ENDIF
1332
1333	!
1334	!-- In case of no given leaf area density gradients, choose a vanishing
1335	!-- gradient
1336	IF ( lad_vertical_gradient_level(1) == -9999999.9 ) THEN
1337	lad_vertical_gradient_level(1) = 0.0
1338	ENDIF
1339
1340	ENDIF
1341
1342	ENDIF
1343
1344	!
1345	!-- Initialize large scale subsidence if required
1346	IF ( subs_vertical_gradient_level(1) /= -9999999.9 ) THEN
1347	large_scale_subsidence = .TRUE.
1348	CALL init_w_subsidence
1349	ENDIF
1350
1351	!
1352	!-- Compute Coriolis parameter
1353	f = 2.0 * omega * SIN( phi / 180.0 * pi )
1354	fs = 2.0 * omega * COS( phi / 180.0 * pi )
1355
1356	!
1357	!-- Check and set buoyancy related parameters and switches
1358	IF ( reference_state == 'horizontal_average' ) THEN
1359	CONTINUE
1360	ELSEIF ( reference_state == 'initial_profile' ) THEN
1361	use_initial_profile_as_reference = .TRUE.
1362	ELSEIF ( reference_state == 'single_value' ) THEN
1363	use_single_reference_value = .TRUE.
1364	IF ( pt_reference == 9999999.9 ) pt_reference = pt_surface
1365	vpt_reference = pt_reference * ( 1.0 + 0.61 * q_surface )
1366	ELSE
1367	message_string = 'illegal value for reference_state: "' // &
1368	TRIM( reference_state ) // '"'
1369	CALL message( 'check_parameters', 'PA0056', 1, 2, 0, 6, 0 )
1370	ENDIF
1371
1372	!
1373	!-- Ocean runs always use reference values in the buoyancy term
1374	IF ( ocean ) THEN
1375	reference_state = 'single_value'
1376	use_single_reference_value = .TRUE.
1377	ENDIF
1378
1379	!
1380	!-- Sign of buoyancy/stability terms
1381	IF ( ocean ) atmos_ocean_sign = -1.0
1382
1383	!
1384	!-- Ocean version must use flux boundary conditions at the top
1385	IF ( ocean .AND. .NOT. use_top_fluxes ) THEN
1386	message_string = 'use_top_fluxes must be .TRUE. in ocean version'
1387	CALL message( 'check_parameters', 'PA0042', 1, 2, 0, 6, 0 )
1388	ENDIF
1389
1390	!
1391	!-- In case of a given slope, compute the relevant quantities
1392	IF ( alpha_surface /= 0.0 ) THEN
1393	IF ( ABS( alpha_surface ) > 90.0 ) THEN
1394	WRITE( message_string, * ) 'ABS( alpha_surface = ', alpha_surface, &
1395	' ) must be < 90.0'
1396	CALL message( 'check_parameters', 'PA0043', 1, 2, 0, 6, 0 )
1397	ENDIF
1398	sloping_surface = .TRUE.
1399	cos_alpha_surface = COS( alpha_surface / 180.0 * pi )
1400	sin_alpha_surface = SIN( alpha_surface / 180.0 * pi )
1401	ENDIF
1402
1403	!
1404	!-- Check time step and cfl_factor
1405	IF ( dt /= -1.0 ) THEN
1406	IF ( dt <= 0.0 .AND. dt /= -1.0 ) THEN
1407	WRITE( message_string, * ) 'dt = ', dt , ' <= 0.0'
1408	CALL message( 'check_parameters', 'PA0044', 1, 2, 0, 6, 0 )
1409	ENDIF
1410	dt_3d = dt
1411	dt_fixed = .TRUE.
1412	ENDIF
1413
1414	IF ( cfl_factor <= 0.0 .OR. cfl_factor > 1.0 ) THEN
1415	IF ( cfl_factor == -1.0 ) THEN
1416	IF ( timestep_scheme == 'runge-kutta-2' ) THEN
1417	cfl_factor = 0.8
1418	ELSEIF ( timestep_scheme == 'runge-kutta-3' ) THEN
1419	cfl_factor = 0.9
1420	ELSE
1421	cfl_factor = 0.9
1422	ENDIF
1423	ELSE
1424	WRITE( message_string, * ) 'cfl_factor = ', cfl_factor, &
1425	' out of range & 0.0 < cfl_factor <= 1.0 is required'
1426	CALL message( 'check_parameters', 'PA0045', 1, 2, 0, 6, 0 )
1427	ENDIF
1428	ENDIF
1429
1430	!
1431	!-- Store simulated time at begin
1432	simulated_time_at_begin = simulated_time
1433
1434	!
1435	!-- Store reference time for coupled runs and change the coupling flag,
1436	!-- if ...
1437	IF ( simulated_time == 0.0 ) THEN
1438	IF ( coupling_start_time == 0.0 ) THEN
1439	time_since_reference_point = 0.0
1440	ELSEIF ( time_since_reference_point < 0.0 ) THEN
1441	run_coupled = .FALSE.
1442	ENDIF
1443	ENDIF
1444
1445	!
1446	!-- Set wind speed in the Galilei-transformed system
1447	IF ( galilei_transformation ) THEN
1448	IF ( use_ug_for_galilei_tr .AND. &
1449	ug_vertical_gradient_level(1) == 0.0 .AND. &
1450	ug_vertical_gradient(1) == 0.0 .AND. &
1451	vg_vertical_gradient_level(1) == 0.0 .AND. &
1452	vg_vertical_gradient(1) == 0.0 ) THEN
1453	u_gtrans = ug_surface * 0.6
1454	v_gtrans = vg_surface * 0.6
1455	ELSEIF ( use_ug_for_galilei_tr .AND. &
1456	( ug_vertical_gradient_level(1) /= 0.0 .OR. &
1457	ug_vertical_gradient(1) /= 0.0 ) ) THEN
1458	message_string = 'baroclinicity (ug) not allowed simultaneously' // &
1459	' with galilei transformation'
1460	CALL message( 'check_parameters', 'PA0046', 1, 2, 0, 6, 0 )
1461	ELSEIF ( use_ug_for_galilei_tr .AND. &
1462	( vg_vertical_gradient_level(1) /= 0.0 .OR. &
1463	vg_vertical_gradient(1) /= 0.0 ) ) THEN
1464	message_string = 'baroclinicity (vg) not allowed simultaneously' // &
1465	' with galilei transformation'
1466	CALL message( 'check_parameters', 'PA0047', 1, 2, 0, 6, 0 )
1467	ELSE
1468	message_string = 'variable translation speed used for galilei-' // &
1469	'transformation, which may cause & instabilities in stably ' // &
1470	'stratified regions'
1471	CALL message( 'check_parameters', 'PA0048', 0, 1, 0, 6, 0 )
1472	ENDIF
1473	ENDIF
1474
1475	!
1476	!-- In case of using a prandtl-layer, calculated (or prescribed) surface
1477	!-- fluxes have to be used in the diffusion-terms
1478	IF ( prandtl_layer ) use_surface_fluxes = .TRUE.
1479
1480	!
1481	!-- Check boundary conditions and set internal variables:
1482	!-- Lateral boundary conditions
1483	IF ( bc_lr /= 'cyclic' .AND. bc_lr /= 'dirichlet/radiation' .AND. &
1484	bc_lr /= 'radiation/dirichlet' ) THEN
1485	message_string = 'unknown boundary condition: bc_lr = "' // &
1486	TRIM( bc_lr ) // '"'
1487	CALL message( 'check_parameters', 'PA0049', 1, 2, 0, 6, 0 )
1488	ENDIF
1489	IF ( bc_ns /= 'cyclic' .AND. bc_ns /= 'dirichlet/radiation' .AND. &
1490	bc_ns /= 'radiation/dirichlet' ) THEN
1491	message_string = 'unknown boundary condition: bc_ns = "' // &
1492	TRIM( bc_ns ) // '"'
1493	CALL message( 'check_parameters', 'PA0050', 1, 2, 0, 6, 0 )
1494	ENDIF
1495
1496	!
1497	!-- Internal variables used for speed optimization in if clauses
1498	IF ( bc_lr /= 'cyclic' ) bc_lr_cyc = .FALSE.
1499	IF ( bc_lr == 'dirichlet/radiation' ) bc_lr_dirrad = .TRUE.
1500	IF ( bc_lr == 'radiation/dirichlet' ) bc_lr_raddir = .TRUE.
1501	IF ( bc_ns /= 'cyclic' ) bc_ns_cyc = .FALSE.
1502	IF ( bc_ns == 'dirichlet/radiation' ) bc_ns_dirrad = .TRUE.
1503	IF ( bc_ns == 'radiation/dirichlet' ) bc_ns_raddir = .TRUE.
1504
1505	!
1506	!-- Non-cyclic lateral boundaries require the multigrid method and Piascek-
1507	!-- Willimas or Wicker - Skamarock advection scheme. Several schemes
1508	!-- and tools do not work with non-cyclic boundary conditions.
1509	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
1510	IF ( psolver /= 'multigrid' ) THEN
1511	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1512	'psolver = "' // TRIM( psolver ) // '"'
1513	CALL message( 'check_parameters', 'PA0051', 1, 2, 0, 6, 0 )
1514	ENDIF
1515	IF ( momentum_advec /= 'pw-scheme' .AND. &
1516	momentum_advec /= 'ws-scheme') THEN
1517	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1518	'momentum_advec = "' // TRIM( momentum_advec ) // '"'
1519	CALL message( 'check_parameters', 'PA0052', 1, 2, 0, 6, 0 )
1520	ENDIF
1521	IF ( scalar_advec /= 'pw-scheme' .AND. &
1522	scalar_advec /= 'ws-scheme' ) THEN
1523	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1524	'scalar_advec = "' // TRIM( scalar_advec ) // '"'
1525	CALL message( 'check_parameters', 'PA0053', 1, 2, 0, 6, 0 )
1526	ENDIF
1527	IF ( galilei_transformation ) THEN
1528	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1529	'galilei_transformation = .T.'
1530	CALL message( 'check_parameters', 'PA0054', 1, 2, 0, 6, 0 )
1531	ENDIF
1532	ENDIF
1533
1534	!
1535	!-- Bottom boundary condition for the turbulent Kinetic energy
1536	IF ( bc_e_b == 'neumann' ) THEN
1537	ibc_e_b = 1
1538	ELSEIF ( bc_e_b == '(u)*2+neumann' ) THEN
1539	ibc_e_b = 2
1540	IF ( prandtl_layer ) THEN
1541	message_string = 'adjust mixing length = FALSE and bc_e_b = "' // &
1542	TRIM( bc_e_b ) // '"'
1543	CALL message( 'check_parameters', 'PA0056', 0, 1, 0, 6, 0 )
1544	ENDIF
1545	IF ( .NOT. prandtl_layer ) THEN
1546	bc_e_b = 'neumann'
1547	ibc_e_b = 1
1548	message_string = 'boundary condition bc_e_b changed to "' // &
1549	TRIM( bc_e_b ) // '"'
1550	CALL message( 'check_parameters', 'PA0057', 0, 1, 0, 6, 0 )
1551	ENDIF
1552	ELSE
1553	message_string = 'unknown boundary condition: bc_e_b = "' // &
1554	TRIM( bc_e_b ) // '"'
1555	CALL message( 'check_parameters', 'PA0058', 1, 2, 0, 6, 0 )
1556	ENDIF
1557
1558	!
1559	!-- Boundary conditions for perturbation pressure
1560	IF ( bc_p_b == 'dirichlet' ) THEN
1561	ibc_p_b = 0
1562	ELSEIF ( bc_p_b == 'neumann' ) THEN
1563	ibc_p_b = 1
1564	ELSE
1565	message_string = 'unknown boundary condition: bc_p_b = "' // &
1566	TRIM( bc_p_b ) // '"'
1567	CALL message( 'check_parameters', 'PA0059', 1, 2, 0, 6, 0 )
1568	ENDIF
1569
1570	IF ( bc_p_t == 'dirichlet' ) THEN
1571	ibc_p_t = 0
1572	ELSEIF ( bc_p_t == 'neumann' ) THEN
1573	ibc_p_t = 1
1574	ELSE
1575	message_string = 'unknown boundary condition: bc_p_t = "' // &
1576	TRIM( bc_p_t ) // '"'
1577	CALL message( 'check_parameters', 'PA0061', 1, 2, 0, 6, 0 )
1578	ENDIF
1579
1580	!
1581	!-- Boundary conditions for potential temperature
1582	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
1583	ibc_pt_b = 2
1584	ELSE
1585	IF ( bc_pt_b == 'dirichlet' ) THEN
1586	ibc_pt_b = 0
1587	ELSEIF ( bc_pt_b == 'neumann' ) THEN
1588	ibc_pt_b = 1
1589	ELSE
1590	message_string = 'unknown boundary condition: bc_pt_b = "' // &
1591	TRIM( bc_pt_b ) // '"'
1592	CALL message( 'check_parameters', 'PA0062', 1, 2, 0, 6, 0 )
1593	ENDIF
1594	ENDIF
1595
1596	IF ( bc_pt_t == 'dirichlet' ) THEN
1597	ibc_pt_t = 0
1598	ELSEIF ( bc_pt_t == 'neumann' ) THEN
1599	ibc_pt_t = 1
1600	ELSEIF ( bc_pt_t == 'initial_gradient' ) THEN
1601	ibc_pt_t = 2
1602	ELSE
1603	message_string = 'unknown boundary condition: bc_pt_t = "' // &
1604	TRIM( bc_pt_t ) // '"'
1605	CALL message( 'check_parameters', 'PA0063', 1, 2, 0, 6, 0 )
1606	ENDIF
1607
1608	IF ( surface_heatflux == 9999999.9 ) constant_heatflux = .FALSE.
1609	IF ( top_heatflux == 9999999.9 ) constant_top_heatflux = .FALSE.
1610
1611	IF ( neutral ) THEN
1612
1613	IF ( surface_heatflux /= 0.0 .AND. surface_heatflux /= 9999999.9 ) &
1614	THEN
1615	message_string = 'heatflux must not be set for pure neutral flow'
1616	CALL message( 'check_parameters', 'PA0351', 1, 2, 0, 6, 0 )
1617	ENDIF
1618
1619	IF ( top_heatflux /= 0.0 .AND. top_heatflux /= 9999999.9 ) &
1620	THEN
1621	message_string = 'heatflux must not be set for pure neutral flow'
1622	CALL message( 'check_parameters', 'PA0351', 1, 2, 0, 6, 0 )
1623	ENDIF
1624
1625	ENDIF
1626
1627	IF ( top_momentumflux_u /= 9999999.9 .AND. &
1628	top_momentumflux_v /= 9999999.9 ) THEN
1629	constant_top_momentumflux = .TRUE.
1630	ELSEIF ( .NOT. ( top_momentumflux_u == 9999999.9 .AND. &
1631	top_momentumflux_v == 9999999.9 ) ) THEN
1632	message_string = 'both, top_momentumflux_u AND top_momentumflux_v ' // &
1633	'must be set'
1634	CALL message( 'check_parameters', 'PA0064', 1, 2, 0, 6, 0 )
1635	ENDIF
1636
1637	!
1638	!-- A given surface temperature implies Dirichlet boundary condition for
1639	!-- temperature. In this case specification of a constant heat flux is
1640	!-- forbidden.
1641	IF ( ibc_pt_b == 0 .AND. constant_heatflux .AND. &
1642	surface_heatflux /= 0.0 ) THEN
1643	message_string = 'boundary_condition: bc_pt_b = "' // TRIM( bc_pt_b ) //&
1644	'& is not allowed with constant_heatflux = .TRUE.'
1645	CALL message( 'check_parameters', 'PA0065', 1, 2, 0, 6, 0 )
1646	ENDIF
1647	IF ( constant_heatflux .AND. pt_surface_initial_change /= 0.0 ) THEN
1648	WRITE ( message_string, * ) 'constant_heatflux = .TRUE. is not allo', &
1649	'wed with pt_surface_initial_change (/=0) = ', &
1650	pt_surface_initial_change
1651	CALL message( 'check_parameters', 'PA0066', 1, 2, 0, 6, 0 )
1652	ENDIF
1653
1654	!
1655	!-- A given temperature at the top implies Dirichlet boundary condition for
1656	!-- temperature. In this case specification of a constant heat flux is
1657	!-- forbidden.
1658	IF ( ibc_pt_t == 0 .AND. constant_top_heatflux .AND. &
1659	top_heatflux /= 0.0 ) THEN
1660	message_string = 'boundary_condition: bc_pt_t = "' // TRIM( bc_pt_t ) //&
1661	'" is not allowed with constant_top_heatflux = .TRUE.'
1662	CALL message( 'check_parameters', 'PA0067', 1, 2, 0, 6, 0 )
1663	ENDIF
1664
1665	!
1666	!-- Boundary conditions for salinity
1667	IF ( ocean ) THEN
1668	IF ( bc_sa_t == 'dirichlet' ) THEN
1669	ibc_sa_t = 0
1670	ELSEIF ( bc_sa_t == 'neumann' ) THEN
1671	ibc_sa_t = 1
1672	ELSE
1673	message_string = 'unknown boundary condition: bc_sa_t = "' // &
1674	TRIM( bc_sa_t ) // '"'
1675	CALL message( 'check_parameters', 'PA0068', 1, 2, 0, 6, 0 )
1676	ENDIF
1677
1678	IF ( top_salinityflux == 9999999.9 ) constant_top_salinityflux = .FALSE.
1679	IF ( ibc_sa_t == 1 .AND. top_salinityflux == 9999999.9 ) THEN
1680	message_string = 'boundary condition: bc_sa_t = "' // &
1681	TRIM( bc_sa_t ) // '" requires to set ' // &
1682	'top_salinityflux'
1683	CALL message( 'check_parameters', 'PA0069', 1, 2, 0, 6, 0 )
1684	ENDIF
1685
1686	!
1687	!-- A fixed salinity at the top implies Dirichlet boundary condition for
1688	!-- salinity. In this case specification of a constant salinity flux is
1689	!-- forbidden.
1690	IF ( ibc_sa_t == 0 .AND. constant_top_salinityflux .AND. &
1691	top_salinityflux /= 0.0 ) THEN
1692	message_string = 'boundary condition: bc_sa_t = "' // &
1693	TRIM( bc_sa_t ) // '" is not allowed with ' // &
1694	'constant_top_salinityflux = .TRUE.'
1695	CALL message( 'check_parameters', 'PA0070', 1, 2, 0, 6, 0 )
1696	ENDIF
1697
1698	ENDIF
1699
1700	!
1701	!-- In case of humidity or passive scalar, set boundary conditions for total
1702	!-- water content / scalar
1703	IF ( humidity .OR. passive_scalar ) THEN
1704	IF ( humidity ) THEN
1705	sq = 'q'
1706	ELSE
1707	sq = 's'
1708	ENDIF
1709	IF ( bc_q_b == 'dirichlet' ) THEN
1710	ibc_q_b = 0
1711	ELSEIF ( bc_q_b == 'neumann' ) THEN
1712	ibc_q_b = 1
1713	ELSE
1714	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
1715	'_b ="' // TRIM( bc_q_b ) // '"'
1716	CALL message( 'check_parameters', 'PA0071', 1, 2, 0, 6, 0 )
1717	ENDIF
1718	IF ( bc_q_t == 'dirichlet' ) THEN
1719	ibc_q_t = 0
1720	ELSEIF ( bc_q_t == 'neumann' ) THEN
1721	ibc_q_t = 1
1722	ELSE
1723	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
1724	'_t ="' // TRIM( bc_q_t ) // '"'
1725	CALL message( 'check_parameters', 'PA0072', 1, 2, 0, 6, 0 )
1726	ENDIF
1727
1728	IF ( surface_waterflux == 9999999.9 ) constant_waterflux = .FALSE.
1729
1730	!
1731	!-- A given surface humidity implies Dirichlet boundary condition for
1732	!-- humidity. In this case specification of a constant water flux is
1733	!-- forbidden.
1734	IF ( ibc_q_b == 0 .AND. constant_waterflux ) THEN
1735	message_string = 'boundary condition: bc_' // TRIM( sq ) // '_b ' // &
1736	'= "' // TRIM( bc_q_b ) // '" is not allowed wi' // &
1737	'th prescribed surface flux'
1738	CALL message( 'check_parameters', 'PA0073', 1, 2, 0, 6, 0 )
1739	ENDIF
1740	IF ( constant_waterflux .AND. q_surface_initial_change /= 0.0 ) THEN
1741	WRITE( message_string, * ) 'a prescribed surface flux is not allo', &
1742	'wed with ', sq, '_surface_initial_change (/=0) = ', &
1743	q_surface_initial_change
1744	CALL message( 'check_parameters', 'PA0074', 1, 2, 0, 6, 0 )
1745	ENDIF
1746
1747	ENDIF
1748	!
1749	!-- Boundary conditions for horizontal components of wind speed
1750	IF ( bc_uv_b == 'dirichlet' ) THEN
1751	ibc_uv_b = 0
1752	ELSEIF ( bc_uv_b == 'neumann' ) THEN
1753	ibc_uv_b = 1
1754	IF ( prandtl_layer ) THEN
1755	message_string = 'boundary condition: bc_uv_b = "' // &
1756	TRIM( bc_uv_b ) // '" is not allowed with prandtl_layer = .TRUE.'
1757	CALL message( 'check_parameters', 'PA0075', 1, 2, 0, 6, 0 )
1758	ENDIF
1759	ELSE
1760	message_string = 'unknown boundary condition: bc_uv_b = "' // &
1761	TRIM( bc_uv_b ) // '"'
1762	CALL message( 'check_parameters', 'PA0076', 1, 2, 0, 6, 0 )
1763	ENDIF
1764	!
1765	!-- In case of coupled simulations u and v at the ground in atmosphere will be
1766	!-- assigned with the u and v values of the ocean surface
1767	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
1768	ibc_uv_b = 2
1769	ENDIF
1770
1771	IF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
1772	bc_uv_t = 'neumann'
1773	ibc_uv_t = 1
1774	ELSE
1775	IF ( bc_uv_t == 'dirichlet' .OR. bc_uv_t == 'dirichlet_0' ) THEN
1776	ibc_uv_t = 0
1777	IF ( bc_uv_t == 'dirichlet_0' ) THEN
1778	!
1779	!-- Velocities for the initial u,v-profiles are set zero at the top
1780	!-- in case of dirichlet_0 conditions
1781	u_init(nzt+1) = 0.0
1782	v_init(nzt+1) = 0.0
1783	ENDIF
1784	ELSEIF ( bc_uv_t == 'neumann' ) THEN
1785	ibc_uv_t = 1
1786	ELSE
1787	message_string = 'unknown boundary condition: bc_uv_t = "' // &
1788	TRIM( bc_uv_t ) // '"'
1789	CALL message( 'check_parameters', 'PA0077', 1, 2, 0, 6, 0 )
1790	ENDIF
1791	ENDIF
1792
1793	!
1794	!-- Compute and check, respectively, the Rayleigh Damping parameter
1795	IF ( rayleigh_damping_factor == -1.0 ) THEN
1796	rayleigh_damping_factor = 0.0
1797	ELSE
1798	IF ( rayleigh_damping_factor < 0.0 .OR. rayleigh_damping_factor > 1.0 ) &
1799	THEN
1800	WRITE( message_string, * ) 'rayleigh_damping_factor = ', &
1801	rayleigh_damping_factor, ' out of range [0.0,1.0]'
1802	CALL message( 'check_parameters', 'PA0078', 1, 2, 0, 6, 0 )
1803	ENDIF
1804	ENDIF
1805
1806	IF ( rayleigh_damping_height == -1.0 ) THEN
1807	IF ( .NOT. ocean ) THEN
1808	rayleigh_damping_height = 0.66666666666 * zu(nzt)
1809	ELSE
1810	rayleigh_damping_height = 0.66666666666 * zu(nzb)
1811	ENDIF
1812	ELSE
1813	IF ( .NOT. ocean ) THEN
1814	IF ( rayleigh_damping_height < 0.0 .OR. &
1815	rayleigh_damping_height > zu(nzt) ) THEN
1816	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
1817	rayleigh_damping_height, ' out of range [0.0,', zu(nzt), ']'
1818	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
1819	ENDIF
1820	ELSE
1821	IF ( rayleigh_damping_height > 0.0 .OR. &
1822	rayleigh_damping_height < zu(nzb) ) THEN
1823	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
1824	rayleigh_damping_height, ' out of range [0.0,', zu(nzb), ']'
1825	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
1826	ENDIF
1827	ENDIF
1828	ENDIF
1829
1830	!
1831	!-- Check number of chosen statistic regions. More than 10 regions are not
1832	!-- allowed, because so far no more than 10 corresponding output files can
1833	!-- be opened (cf. check_open)
1834	IF ( statistic_regions > 9 .OR. statistic_regions < 0 ) THEN
1835	WRITE ( message_string, * ) 'number of statistic_regions = ', &
1836	statistic_regions+1, ' but only 10 regions are allowed'
1837	CALL message( 'check_parameters', 'PA0082', 1, 2, 0, 6, 0 )
1838	ENDIF
1839	IF ( normalizing_region > statistic_regions .OR. &
1840	normalizing_region < 0) THEN
1841	WRITE ( message_string, * ) 'normalizing_region = ', &
1842	normalizing_region, ' must be >= 0 and <= ',statistic_regions, &
1843	' (value of statistic_regions)'
1844	CALL message( 'check_parameters', 'PA0083', 1, 2, 0, 6, 0 )
1845	ENDIF
1846
1847	!
1848	!-- Check the interval for sorting particles.
1849	!-- Using particles as cloud droplets requires sorting after each timestep.
1850	IF ( dt_sort_particles /= 0.0 .AND. cloud_droplets ) THEN
1851	dt_sort_particles = 0.0
1852	message_string = 'dt_sort_particles is reset to 0.0 because of cloud' //&
1853	'_droplets = .TRUE.'
1854	CALL message( 'check_parameters', 'PA0084', 0, 1, 0, 6, 0 )
1855	ENDIF
1856
1857	!
1858	!-- Set the default intervals for data output, if necessary
1859	!-- NOTE: dt_dosp has already been set in package_parin
1860	IF ( dt_data_output /= 9999999.9 ) THEN
1861	IF ( dt_dopr == 9999999.9 ) dt_dopr = dt_data_output
1862	IF ( dt_dopts == 9999999.9 ) dt_dopts = dt_data_output
1863	IF ( dt_do2d_xy == 9999999.9 ) dt_do2d_xy = dt_data_output
1864	IF ( dt_do2d_xz == 9999999.9 ) dt_do2d_xz = dt_data_output
1865	IF ( dt_do2d_yz == 9999999.9 ) dt_do2d_yz = dt_data_output
1866	IF ( dt_do3d == 9999999.9 ) dt_do3d = dt_data_output
1867	IF ( dt_data_output_av == 9999999.9 ) dt_data_output_av = dt_data_output
1868	DO mid = 1, max_masks
1869	IF ( dt_domask(mid) == 9999999.9 ) dt_domask(mid) = dt_data_output
1870	ENDDO
1871	ENDIF
1872
1873	!
1874	!-- Set the default skip time intervals for data output, if necessary
1875	IF ( skip_time_dopr == 9999999.9 ) &
1876	skip_time_dopr = skip_time_data_output
1877	IF ( skip_time_dosp == 9999999.9 ) &
1878	skip_time_dosp = skip_time_data_output
1879	IF ( skip_time_do2d_xy == 9999999.9 ) &
1880	skip_time_do2d_xy = skip_time_data_output
1881	IF ( skip_time_do2d_xz == 9999999.9 ) &
1882	skip_time_do2d_xz = skip_time_data_output
1883	IF ( skip_time_do2d_yz == 9999999.9 ) &
1884	skip_time_do2d_yz = skip_time_data_output
1885	IF ( skip_time_do3d == 9999999.9 ) &
1886	skip_time_do3d = skip_time_data_output
1887	IF ( skip_time_data_output_av == 9999999.9 ) &
1888	skip_time_data_output_av = skip_time_data_output
1889	DO mid = 1, max_masks
1890	IF ( skip_time_domask(mid) == 9999999.9 ) &
1891	skip_time_domask(mid) = skip_time_data_output
1892	ENDDO
1893
1894	!
1895	!-- Check the average intervals (first for 3d-data, then for profiles and
1896	!-- spectra)
1897	IF ( averaging_interval > dt_data_output_av ) THEN
1898	WRITE( message_string, * ) 'averaging_interval = ', &
1899	averaging_interval, ' must be <= dt_data_output = ', dt_data_output
1900	CALL message( 'check_parameters', 'PA0085', 1, 2, 0, 6, 0 )
1901	ENDIF
1902
1903	IF ( averaging_interval_pr == 9999999.9 ) THEN
1904	averaging_interval_pr = averaging_interval
1905	ENDIF
1906
1907	IF ( averaging_interval_pr > dt_dopr ) THEN
1908	WRITE( message_string, * ) 'averaging_interval_pr = ', &
1909	averaging_interval_pr, ' must be <= dt_dopr = ', dt_dopr
1910	CALL message( 'check_parameters', 'PA0086', 1, 2, 0, 6, 0 )
1911	ENDIF
1912
1913	IF ( averaging_interval_sp == 9999999.9 ) THEN
1914	averaging_interval_sp = averaging_interval
1915	ENDIF
1916
1917	IF ( averaging_interval_sp > dt_dosp ) THEN
1918	WRITE( message_string, * ) 'averaging_interval_sp = ', &
1919	averaging_interval_sp, ' must be <= dt_dosp = ', dt_dosp
1920	CALL message( 'check_parameters', 'PA0087', 1, 2, 0, 6, 0 )
1921	ENDIF
1922
1923	!
1924	!-- Set the default interval for profiles entering the temporal average
1925	IF ( dt_averaging_input_pr == 9999999.9 ) THEN
1926	dt_averaging_input_pr = dt_averaging_input
1927	ENDIF
1928
1929	!
1930	!-- Set the default interval for the output of timeseries to a reasonable
1931	!-- value (tries to minimize the number of calls of flow_statistics)
1932	IF ( dt_dots == 9999999.9 ) THEN
1933	IF ( averaging_interval_pr == 0.0 ) THEN
1934	dt_dots = MIN( dt_run_control, dt_dopr )
1935	ELSE
1936	dt_dots = MIN( dt_run_control, dt_averaging_input_pr )
1937	ENDIF
1938	ENDIF
1939
1940	!
1941	!-- Check the sample rate for averaging (first for 3d-data, then for profiles)
1942	IF ( dt_averaging_input > averaging_interval ) THEN
1943	WRITE( message_string, * ) 'dt_averaging_input = ', &
1944	dt_averaging_input, ' must be <= averaging_interval = ', &
1945	averaging_interval
1946	CALL message( 'check_parameters', 'PA0088', 1, 2, 0, 6, 0 )
1947	ENDIF
1948
1949	IF ( dt_averaging_input_pr > averaging_interval_pr ) THEN
1950	WRITE( message_string, * ) 'dt_averaging_input_pr = ', &
1951	dt_averaging_input_pr, ' must be <= averaging_interval_pr = ', &
1952	averaging_interval_pr
1953	CALL message( 'check_parameters', 'PA0089', 1, 2, 0, 6, 0 )
1954	ENDIF
1955
1956	!
1957	!-- Set the default value for the integration interval of precipitation amount
1958	IF ( precipitation ) THEN
1959	IF ( precipitation_amount_interval == 9999999.9 ) THEN
1960	precipitation_amount_interval = dt_do2d_xy
1961	ELSE
1962	IF ( precipitation_amount_interval > dt_do2d_xy ) THEN
1963	WRITE( message_string, * ) 'precipitation_amount_interval = ', &
1964	precipitation_amount_interval, ' must not be larger than ', &
1965	'dt_do2d_xy = ', dt_do2d_xy
1966	CALL message( 'check_parameters', 'PA0090', 1, 2, 0, 6, 0 )
1967	ENDIF
1968	ENDIF
1969	ENDIF
1970
1971	!
1972	!-- Determine the number of output profiles and check whether they are
1973	!-- permissible
1974	DO WHILE ( data_output_pr(dopr_n+1) /= ' ' )
1975
1976	dopr_n = dopr_n + 1
1977	i = dopr_n
1978
1979	!
1980	!-- Determine internal profile number (for hom, homs)
1981	!-- and store height levels
1982	SELECT CASE ( TRIM( data_output_pr(i) ) )
1983
1984	CASE ( 'u', '#u' )
1985	dopr_index(i) = 1
1986	dopr_unit(i) = 'm/s'
1987	hom(:,2,1,:) = SPREAD( zu, 2, statistic_regions+1 )
1988	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1989	dopr_initial_index(i) = 5
1990	hom(:,2,5,:) = SPREAD( zu, 2, statistic_regions+1 )
1991	data_output_pr(i) = data_output_pr(i)(2:)
1992	ENDIF
1993
1994	CASE ( 'v', '#v' )
1995	dopr_index(i) = 2
1996	dopr_unit(i) = 'm/s'
1997	hom(:,2,2,:) = SPREAD( zu, 2, statistic_regions+1 )
1998	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1999	dopr_initial_index(i) = 6
2000	hom(:,2,6,:) = SPREAD( zu, 2, statistic_regions+1 )
2001	data_output_pr(i) = data_output_pr(i)(2:)
2002	ENDIF
2003
2004	CASE ( 'w' )
2005	dopr_index(i) = 3
2006	dopr_unit(i) = 'm/s'
2007	hom(:,2,3,:) = SPREAD( zw, 2, statistic_regions+1 )
2008
2009	CASE ( 'pt', '#pt' )
2010	IF ( .NOT. cloud_physics ) THEN
2011	dopr_index(i) = 4
2012	dopr_unit(i) = 'K'
2013	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
2014	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2015	dopr_initial_index(i) = 7
2016	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
2017	hom(nzb,2,7,:) = 0.0 ! because zu(nzb) is negative
2018	data_output_pr(i) = data_output_pr(i)(2:)
2019	ENDIF
2020	ELSE
2021	dopr_index(i) = 43
2022	dopr_unit(i) = 'K'
2023	hom(:,2,43,:) = SPREAD( zu, 2, statistic_regions+1 )
2024	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2025	dopr_initial_index(i) = 28
2026	hom(:,2,28,:) = SPREAD( zu, 2, statistic_regions+1 )
2027	hom(nzb,2,28,:) = 0.0 ! because zu(nzb) is negative
2028	data_output_pr(i) = data_output_pr(i)(2:)
2029	ENDIF
2030	ENDIF
2031
2032	CASE ( 'e' )
2033	dopr_index(i) = 8
2034	dopr_unit(i) = 'm2/s2'
2035	hom(:,2,8,:) = SPREAD( zu, 2, statistic_regions+1 )
2036	hom(nzb,2,8,:) = 0.0
2037
2038	CASE ( 'km', '#km' )
2039	dopr_index(i) = 9
2040	dopr_unit(i) = 'm2/s'
2041	hom(:,2,9,:) = SPREAD( zu, 2, statistic_regions+1 )
2042	hom(nzb,2,9,:) = 0.0
2043	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2044	dopr_initial_index(i) = 23
2045	hom(:,2,23,:) = hom(:,2,9,:)
2046	data_output_pr(i) = data_output_pr(i)(2:)
2047	ENDIF
2048
2049	CASE ( 'kh', '#kh' )
2050	dopr_index(i) = 10
2051	dopr_unit(i) = 'm2/s'
2052	hom(:,2,10,:) = SPREAD( zu, 2, statistic_regions+1 )
2053	hom(nzb,2,10,:) = 0.0
2054	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2055	dopr_initial_index(i) = 24
2056	hom(:,2,24,:) = hom(:,2,10,:)
2057	data_output_pr(i) = data_output_pr(i)(2:)
2058	ENDIF
2059
2060	CASE ( 'l', '#l' )
2061	dopr_index(i) = 11
2062	dopr_unit(i) = 'm'
2063	hom(:,2,11,:) = SPREAD( zu, 2, statistic_regions+1 )
2064	hom(nzb,2,11,:) = 0.0
2065	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2066	dopr_initial_index(i) = 25
2067	hom(:,2,25,:) = hom(:,2,11,:)
2068	data_output_pr(i) = data_output_pr(i)(2:)
2069	ENDIF
2070
2071	CASE ( 'w"u"' )
2072	dopr_index(i) = 12
2073	dopr_unit(i) = 'm2/s2'
2074	hom(:,2,12,:) = SPREAD( zw, 2, statistic_regions+1 )
2075	IF ( prandtl_layer ) hom(nzb,2,12,:) = zu(1)
2076
2077	CASE ( 'wu' )
2078	dopr_index(i) = 13
2079	dopr_unit(i) = 'm2/s2'
2080	hom(:,2,13,:) = SPREAD( zw, 2, statistic_regions+1 )
2081
2082	CASE ( 'w"v"' )
2083	dopr_index(i) = 14
2084	dopr_unit(i) = 'm2/s2'
2085	hom(:,2,14,:) = SPREAD( zw, 2, statistic_regions+1 )
2086	IF ( prandtl_layer ) hom(nzb,2,14,:) = zu(1)
2087
2088	CASE ( 'wv' )
2089	dopr_index(i) = 15
2090	dopr_unit(i) = 'm2/s2'
2091	hom(:,2,15,:) = SPREAD( zw, 2, statistic_regions+1 )
2092
2093	CASE ( 'w"pt"' )
2094	dopr_index(i) = 16
2095	dopr_unit(i) = 'K m/s'
2096	hom(:,2,16,:) = SPREAD( zw, 2, statistic_regions+1 )
2097
2098	CASE ( 'wpt' )
2099	dopr_index(i) = 17
2100	dopr_unit(i) = 'K m/s'
2101	hom(:,2,17,:) = SPREAD( zw, 2, statistic_regions+1 )
2102
2103	CASE ( 'wpt' )
2104	dopr_index(i) = 18
2105	dopr_unit(i) = 'K m/s'
2106	hom(:,2,18,:) = SPREAD( zw, 2, statistic_regions+1 )
2107
2108	CASE ( 'wu' )
2109	dopr_index(i) = 19
2110	dopr_unit(i) = 'm2/s2'
2111	hom(:,2,19,:) = SPREAD( zw, 2, statistic_regions+1 )
2112	IF ( prandtl_layer ) hom(nzb,2,19,:) = zu(1)
2113
2114	CASE ( 'wv' )
2115	dopr_index(i) = 20
2116	dopr_unit(i) = 'm2/s2'
2117	hom(:,2,20,:) = SPREAD( zw, 2, statistic_regions+1 )
2118	IF ( prandtl_layer ) hom(nzb,2,20,:) = zu(1)
2119
2120	CASE ( 'wptBC' )
2121	dopr_index(i) = 21
2122	dopr_unit(i) = 'K m/s'
2123	hom(:,2,21,:) = SPREAD( zw, 2, statistic_regions+1 )
2124
2125	CASE ( 'wptBC' )
2126	dopr_index(i) = 22
2127	dopr_unit(i) = 'K m/s'
2128	hom(:,2,22,:) = SPREAD( zw, 2, statistic_regions+1 )
2129
2130	CASE ( 'sa', '#sa' )
2131	IF ( .NOT. ocean ) THEN
2132	message_string = 'data_output_pr = ' // &
2133	TRIM( data_output_pr(i) ) // ' is not imp' // &
2134	'lemented for ocean = .FALSE.'
2135	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2136	ELSE
2137	dopr_index(i) = 23
2138	dopr_unit(i) = 'psu'
2139	hom(:,2,23,:) = SPREAD( zu, 2, statistic_regions+1 )
2140	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2141	dopr_initial_index(i) = 26
2142	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2143	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
2144	data_output_pr(i) = data_output_pr(i)(2:)
2145	ENDIF
2146	ENDIF
2147
2148	CASE ( 'u*2' )
2149	dopr_index(i) = 30
2150	dopr_unit(i) = 'm2/s2'
2151	hom(:,2,30,:) = SPREAD( zu, 2, statistic_regions+1 )
2152
2153	CASE ( 'v*2' )
2154	dopr_index(i) = 31
2155	dopr_unit(i) = 'm2/s2'
2156	hom(:,2,31,:) = SPREAD( zu, 2, statistic_regions+1 )
2157
2158	CASE ( 'w*2' )
2159	dopr_index(i) = 32
2160	dopr_unit(i) = 'm2/s2'
2161	hom(:,2,32,:) = SPREAD( zw, 2, statistic_regions+1 )
2162
2163	CASE ( 'pt*2' )
2164	dopr_index(i) = 33
2165	dopr_unit(i) = 'K2'
2166	hom(:,2,33,:) = SPREAD( zu, 2, statistic_regions+1 )
2167
2168	CASE ( 'e*' )
2169	dopr_index(i) = 34
2170	dopr_unit(i) = 'm2/s2'
2171	hom(:,2,34,:) = SPREAD( zu, 2, statistic_regions+1 )
2172
2173	CASE ( 'w2pt' )
2174	dopr_index(i) = 35
2175	dopr_unit(i) = 'K m2/s2'
2176	hom(:,2,35,:) = SPREAD( zw, 2, statistic_regions+1 )
2177
2178	CASE ( 'wpt2' )
2179	dopr_index(i) = 36
2180	dopr_unit(i) = 'K2 m/s'
2181	hom(:,2,36,:) = SPREAD( zw, 2, statistic_regions+1 )
2182
2183	CASE ( 'we' )
2184	dopr_index(i) = 37
2185	dopr_unit(i) = 'm3/s3'
2186	hom(:,2,37,:) = SPREAD( zw, 2, statistic_regions+1 )
2187
2188	CASE ( 'w*3' )
2189	dopr_index(i) = 38
2190	dopr_unit(i) = 'm3/s3'
2191	hom(:,2,38,:) = SPREAD( zw, 2, statistic_regions+1 )
2192
2193	CASE ( 'Sw' )
2194	dopr_index(i) = 39
2195	dopr_unit(i) = 'none'
2196	hom(:,2,39,:) = SPREAD( zw, 2, statistic_regions+1 )
2197
2198	CASE ( 'p' )
2199	dopr_index(i) = 40
2200	dopr_unit(i) = 'Pa'
2201	hom(:,2,40,:) = SPREAD( zu, 2, statistic_regions+1 )
2202
2203	CASE ( 'q', '#q' )
2204	IF ( .NOT. humidity ) THEN
2205	message_string = 'data_output_pr = ' // &
2206	TRIM( data_output_pr(i) ) // ' is not imp' // &
2207	'lemented for humidity = .FALSE.'
2208	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2209	ELSE
2210	dopr_index(i) = 41
2211	dopr_unit(i) = 'kg/kg'
2212	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
2213	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2214	dopr_initial_index(i) = 26
2215	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2216	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
2217	data_output_pr(i) = data_output_pr(i)(2:)
2218	ENDIF
2219	ENDIF
2220
2221	CASE ( 's', '#s' )
2222	IF ( .NOT. passive_scalar ) THEN
2223	message_string = 'data_output_pr = ' // &
2224	TRIM( data_output_pr(i) ) // ' is not imp' // &
2225	'lemented for passive_scalar = .FALSE.'
2226	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2227	ELSE
2228	dopr_index(i) = 41
2229	dopr_unit(i) = 'kg/m3'
2230	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
2231	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2232	dopr_initial_index(i) = 26
2233	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2234	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
2235	data_output_pr(i) = data_output_pr(i)(2:)
2236	ENDIF
2237	ENDIF
2238
2239	CASE ( 'qv', '#qv' )
2240	IF ( .NOT. cloud_physics ) THEN
2241	dopr_index(i) = 41
2242	dopr_unit(i) = 'kg/kg'
2243	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
2244	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2245	dopr_initial_index(i) = 26
2246	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2247	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
2248	data_output_pr(i) = data_output_pr(i)(2:)
2249	ENDIF
2250	ELSE
2251	dopr_index(i) = 42
2252	dopr_unit(i) = 'kg/kg'
2253	hom(:,2,42,:) = SPREAD( zu, 2, statistic_regions+1 )
2254	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2255	dopr_initial_index(i) = 27
2256	hom(:,2,27,:) = SPREAD( zu, 2, statistic_regions+1 )
2257	hom(nzb,2,27,:) = 0.0 ! weil zu(nzb) negativ ist
2258	data_output_pr(i) = data_output_pr(i)(2:)
2259	ENDIF
2260	ENDIF
2261
2262	CASE ( 'lpt', '#lpt' )
2263	IF ( .NOT. cloud_physics ) THEN
2264	message_string = 'data_output_pr = ' // &
2265	TRIM( data_output_pr(i) ) // ' is not imp' // &
2266	'lemented for cloud_physics = .FALSE.'
2267	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2268	ELSE
2269	dopr_index(i) = 4
2270	dopr_unit(i) = 'K'
2271	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
2272	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2273	dopr_initial_index(i) = 7
2274	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
2275	hom(nzb,2,7,:) = 0.0 ! weil zu(nzb) negativ ist
2276	data_output_pr(i) = data_output_pr(i)(2:)
2277	ENDIF
2278	ENDIF
2279
2280	CASE ( 'vpt', '#vpt' )
2281	dopr_index(i) = 44
2282	dopr_unit(i) = 'K'
2283	hom(:,2,44,:) = SPREAD( zu, 2, statistic_regions+1 )
2284	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2285	dopr_initial_index(i) = 29
2286	hom(:,2,29,:) = SPREAD( zu, 2, statistic_regions+1 )
2287	hom(nzb,2,29,:) = 0.0 ! weil zu(nzb) negativ ist
2288	data_output_pr(i) = data_output_pr(i)(2:)
2289	ENDIF
2290
2291	CASE ( 'w"vpt"' )
2292	dopr_index(i) = 45
2293	dopr_unit(i) = 'K m/s'
2294	hom(:,2,45,:) = SPREAD( zw, 2, statistic_regions+1 )
2295
2296	CASE ( 'wvpt' )
2297	dopr_index(i) = 46
2298	dopr_unit(i) = 'K m/s'
2299	hom(:,2,46,:) = SPREAD( zw, 2, statistic_regions+1 )
2300
2301	CASE ( 'wvpt' )
2302	dopr_index(i) = 47
2303	dopr_unit(i) = 'K m/s'
2304	hom(:,2,47,:) = SPREAD( zw, 2, statistic_regions+1 )
2305
2306	CASE ( 'w"q"' )
2307	IF ( .NOT. humidity ) THEN
2308	message_string = 'data_output_pr = ' // &
2309	TRIM( data_output_pr(i) ) // ' is not imp' // &
2310	'lemented for humidity = .FALSE.'
2311	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2312	ELSE
2313	dopr_index(i) = 48
2314	dopr_unit(i) = 'kg/kg m/s'
2315	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2316	ENDIF
2317
2318	CASE ( 'wq' )
2319	IF ( .NOT. humidity ) THEN
2320	message_string = 'data_output_pr = ' // &
2321	TRIM( data_output_pr(i) ) // ' is not imp' // &
2322	'lemented for humidity = .FALSE.'
2323	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2324	ELSE
2325	dopr_index(i) = 49
2326	dopr_unit(i) = 'kg/kg m/s'
2327	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2328	ENDIF
2329
2330	CASE ( 'wq' )
2331	IF ( .NOT. humidity ) THEN
2332	message_string = 'data_output_pr = ' // &
2333	TRIM( data_output_pr(i) ) // ' is not imp' // &
2334	'lemented for humidity = .FALSE.'
2335	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2336	ELSE
2337	dopr_index(i) = 50
2338	dopr_unit(i) = 'kg/kg m/s'
2339	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2340	ENDIF
2341
2342	CASE ( 'w"s"' )
2343	IF ( .NOT. passive_scalar ) THEN
2344	message_string = 'data_output_pr = ' // &
2345	TRIM( data_output_pr(i) ) // ' is not imp' // &
2346	'lemented for passive_scalar = .FALSE.'
2347	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2348	ELSE
2349	dopr_index(i) = 48
2350	dopr_unit(i) = 'kg/m3 m/s'
2351	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2352	ENDIF
2353
2354	CASE ( 'ws' )
2355	IF ( .NOT. passive_scalar ) THEN
2356	message_string = 'data_output_pr = ' // &
2357	TRIM( data_output_pr(i) ) // ' is not imp' // &
2358	'lemented for passive_scalar = .FALSE.'
2359	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2360	ELSE
2361	dopr_index(i) = 49
2362	dopr_unit(i) = 'kg/m3 m/s'
2363	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2364	ENDIF
2365
2366	CASE ( 'ws' )
2367	IF ( .NOT. passive_scalar ) THEN
2368	message_string = 'data_output_pr = ' // &
2369	TRIM( data_output_pr(i) ) // ' is not imp' // &
2370	'lemented for passive_scalar = .FALSE.'
2371	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2372	ELSE
2373	dopr_index(i) = 50
2374	dopr_unit(i) = 'kg/m3 m/s'
2375	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2376	ENDIF
2377
2378	CASE ( 'w"qv"' )
2379	IF ( humidity .AND. .NOT. cloud_physics ) &
2380	THEN
2381	dopr_index(i) = 48
2382	dopr_unit(i) = 'kg/kg m/s'
2383	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2384	ELSEIF( humidity .AND. cloud_physics ) THEN
2385	dopr_index(i) = 51
2386	dopr_unit(i) = 'kg/kg m/s'
2387	hom(:,2,51,:) = SPREAD( zw, 2, statistic_regions+1 )
2388	ELSE
2389	message_string = 'data_output_pr = ' // &
2390	TRIM( data_output_pr(i) ) // ' is not imp' // &
2391	'lemented for cloud_physics = .FALSE. an&' // &
2392	'd humidity = .FALSE.'
2393	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2394	ENDIF
2395
2396	CASE ( 'wqv' )
2397	IF ( humidity .AND. .NOT. cloud_physics ) &
2398	THEN
2399	dopr_index(i) = 49
2400	dopr_unit(i) = 'kg/kg m/s'
2401	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2402	ELSEIF( humidity .AND. cloud_physics ) THEN
2403	dopr_index(i) = 52
2404	dopr_unit(i) = 'kg/kg m/s'
2405	hom(:,2,52,:) = SPREAD( zw, 2, statistic_regions+1 )
2406	ELSE
2407	message_string = 'data_output_pr = ' // &
2408	TRIM( data_output_pr(i) ) // ' is not imp' // &
2409	'lemented for cloud_physics = .FALSE. an&' // &
2410	'd humidity = .FALSE.'
2411	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2412	ENDIF
2413
2414	CASE ( 'wqv' )
2415	IF ( humidity .AND. .NOT. cloud_physics ) &
2416	THEN
2417	dopr_index(i) = 50
2418	dopr_unit(i) = 'kg/kg m/s'
2419	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2420	ELSEIF( humidity .AND. cloud_physics ) THEN
2421	dopr_index(i) = 53
2422	dopr_unit(i) = 'kg/kg m/s'
2423	hom(:,2,53,:) = SPREAD( zw, 2, statistic_regions+1 )
2424	ELSE
2425	message_string = 'data_output_pr = ' // &
2426	TRIM( data_output_pr(i) ) // ' is not imp' // &
2427	'lemented for cloud_physics = .FALSE. an&' // &
2428	'd humidity = .FALSE.'
2429	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2430	ENDIF
2431
2432	CASE ( 'ql' )
2433	IF ( .NOT. cloud_physics .AND. .NOT. cloud_droplets ) THEN
2434	message_string = 'data_output_pr = ' // &
2435	TRIM( data_output_pr(i) ) // ' is not imp' // &
2436	'lemented for cloud_physics = .FALSE. or' // &
2437	'&cloud_droplets = .FALSE.'
2438	CALL message( 'check_parameters', 'PA0096', 1, 2, 0, 6, 0 )
2439	ELSE
2440	dopr_index(i) = 54
2441	dopr_unit(i) = 'kg/kg'
2442	hom(:,2,54,:) = SPREAD( zu, 2, statistic_regions+1 )
2443	ENDIF
2444
2445	CASE ( 'wuu*:dz' )
2446	dopr_index(i) = 55
2447	dopr_unit(i) = 'm2/s3'
2448	hom(:,2,55,:) = SPREAD( zu, 2, statistic_regions+1 )
2449
2450	CASE ( 'wp:dz' )
2451	dopr_index(i) = 56
2452	dopr_unit(i) = 'm2/s3'
2453	hom(:,2,56,:) = SPREAD( zw, 2, statistic_regions+1 )
2454
2455	CASE ( 'w"e:dz' )
2456	dopr_index(i) = 57
2457	dopr_unit(i) = 'm2/s3'
2458	hom(:,2,57,:) = SPREAD( zu, 2, statistic_regions+1 )
2459
2460
2461	CASE ( 'u"pt"' )
2462	dopr_index(i) = 58
2463	dopr_unit(i) = 'K m/s'
2464	hom(:,2,58,:) = SPREAD( zu, 2, statistic_regions+1 )
2465
2466	CASE ( 'upt' )
2467	dopr_index(i) = 59
2468	dopr_unit(i) = 'K m/s'
2469	hom(:,2,59,:) = SPREAD( zu, 2, statistic_regions+1 )
2470
2471	CASE ( 'upt_t' )
2472	dopr_index(i) = 60
2473	dopr_unit(i) = 'K m/s'
2474	hom(:,2,60,:) = SPREAD( zu, 2, statistic_regions+1 )
2475
2476	CASE ( 'v"pt"' )
2477	dopr_index(i) = 61
2478	dopr_unit(i) = 'K m/s'
2479	hom(:,2,61,:) = SPREAD( zu, 2, statistic_regions+1 )
2480
2481	CASE ( 'vpt' )
2482	dopr_index(i) = 62
2483	dopr_unit(i) = 'K m/s'
2484	hom(:,2,62,:) = SPREAD( zu, 2, statistic_regions+1 )
2485
2486	CASE ( 'vpt_t' )
2487	dopr_index(i) = 63
2488	dopr_unit(i) = 'K m/s'
2489	hom(:,2,63,:) = SPREAD( zu, 2, statistic_regions+1 )
2490
2491	CASE ( 'rho' )
2492	IF ( .NOT. ocean ) THEN
2493	message_string = 'data_output_pr = ' // &
2494	TRIM( data_output_pr(i) ) // ' is not imp' // &
2495	'lemented for ocean = .FALSE.'
2496	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2497	ELSE
2498	dopr_index(i) = 64
2499	dopr_unit(i) = 'kg/m3'
2500	hom(:,2,64,:) = SPREAD( zu, 2, statistic_regions+1 )
2501	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2502	dopr_initial_index(i) = 77
2503	hom(:,2,77,:) = SPREAD( zu, 2, statistic_regions+1 )
2504	hom(nzb,2,77,:) = 0.0 ! because zu(nzb) is negative
2505	data_output_pr(i) = data_output_pr(i)(2:)
2506	ENDIF
2507	ENDIF
2508
2509	CASE ( 'w"sa"' )
2510	IF ( .NOT. ocean ) THEN
2511	message_string = 'data_output_pr = ' // &
2512	TRIM( data_output_pr(i) ) // ' is not imp' // &
2513	'lemented for ocean = .FALSE.'
2514	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2515	ELSE
2516	dopr_index(i) = 65
2517	dopr_unit(i) = 'psu m/s'
2518	hom(:,2,65,:) = SPREAD( zw, 2, statistic_regions+1 )
2519	ENDIF
2520
2521	CASE ( 'wsa' )
2522	IF ( .NOT. ocean ) THEN
2523	message_string = 'data_output_pr = ' // &
2524	TRIM( data_output_pr(i) ) // ' is not imp' // &
2525	'lemented for ocean = .FALSE.'
2526	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2527	ELSE
2528	dopr_index(i) = 66
2529	dopr_unit(i) = 'psu m/s'
2530	hom(:,2,66,:) = SPREAD( zw, 2, statistic_regions+1 )
2531	ENDIF
2532
2533	CASE ( 'wsa' )
2534	IF ( .NOT. ocean ) THEN
2535	message_string = 'data_output_pr = ' // &
2536	TRIM( data_output_pr(i) ) // ' is not imp' // &
2537	'lemented for ocean = .FALSE.'
2538	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2539	ELSE
2540	dopr_index(i) = 67
2541	dopr_unit(i) = 'psu m/s'
2542	hom(:,2,67,:) = SPREAD( zw, 2, statistic_regions+1 )
2543	ENDIF
2544
2545	CASE ( 'wp' )
2546	dopr_index(i) = 68
2547	dopr_unit(i) = 'm3/s3'
2548	hom(:,2,68,:) = SPREAD( zu, 2, statistic_regions+1 )
2549
2550	CASE ( 'w"e' )
2551	dopr_index(i) = 69
2552	dopr_unit(i) = 'm3/s3'
2553	hom(:,2,69,:) = SPREAD( zu, 2, statistic_regions+1 )
2554
2555	CASE ( 'q*2' )
2556	IF ( .NOT. humidity ) THEN
2557	message_string = 'data_output_pr = ' // &
2558	TRIM( data_output_pr(i) ) // ' is not imp' // &
2559	'lemented for humidity = .FALSE.'
2560	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2561	ELSE
2562	dopr_index(i) = 70
2563	dopr_unit(i) = 'kg2/kg2'
2564	hom(:,2,70,:) = SPREAD( zu, 2, statistic_regions+1 )
2565	ENDIF
2566
2567	CASE ( 'prho' )
2568	IF ( .NOT. ocean ) THEN
2569	message_string = 'data_output_pr = ' // &
2570	TRIM( data_output_pr(i) ) // ' is not imp' // &
2571	'lemented for ocean = .FALSE.'
2572	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2573	ELSE
2574	dopr_index(i) = 71
2575	dopr_unit(i) = 'kg/m3'
2576	hom(:,2,71,:) = SPREAD( zu, 2, statistic_regions+1 )
2577	ENDIF
2578
2579	CASE ( 'hyp' )
2580	dopr_index(i) = 72
2581	dopr_unit(i) = 'dbar'
2582	hom(:,2,72,:) = SPREAD( zu, 2, statistic_regions+1 )
2583
2584	CASE ( 'nr' )
2585	IF ( .NOT. cloud_physics ) THEN
2586	message_string = 'data_output_pr = ' // &
2587	TRIM( data_output_pr(i) ) // ' is not imp' // &
2588	'lemented for cloud_physics = .FALSE.'
2589	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2590	ELSEIF ( icloud_scheme /= 0 ) THEN
2591	message_string = 'data_output_pr = ' // &
2592	TRIM( data_output_pr(i) ) // ' is not imp' // &
2593	'lemented for cloud_scheme /= seifert_beheng'
2594	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
2595	ELSEIF ( .NOT. precipitation ) THEN
2596	message_string = 'data_output_pr = ' // &
2597	TRIM( data_output_pr(i) ) // ' is not imp' // &
2598	'lemented for precipitation = .FALSE.'
2599	CALL message( 'check_parameters', 'PA0361', 1, 2, 0, 6, 0 )
2600	ELSE
2601	dopr_index(i) = 73
2602	dopr_unit(i) = '1/m3'
2603	hom(:,2,73,:) = SPREAD( zu, 2, statistic_regions+1 )
2604	ENDIF
2605
2606	CASE ( 'qr' )
2607	IF ( .NOT. cloud_physics ) THEN
2608	message_string = 'data_output_pr = ' // &
2609	TRIM( data_output_pr(i) ) // ' is not imp' // &
2610	'lemented for cloud_physics = .FALSE.'
2611	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2612	ELSEIF ( icloud_scheme /= 0 ) THEN
2613	message_string = 'data_output_pr = ' // &
2614	TRIM( data_output_pr(i) ) // ' is not imp' // &
2615	'lemented for cloud_scheme /= seifert_beheng'
2616	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
2617	ELSEIF ( .NOT. precipitation ) THEN
2618	message_string = 'data_output_pr = ' // &
2619	TRIM( data_output_pr(i) ) // ' is not imp' // &
2620	'lemented for precipitation = .FALSE.'
2621	CALL message( 'check_parameters', 'PA0361', 1, 2, 0, 6, 0 )
2622	ELSE
2623	dopr_index(i) = 74
2624	dopr_unit(i) = 'kg/kg'
2625	hom(:,2,74,:) = SPREAD( zu, 2, statistic_regions+1 )
2626	ENDIF
2627
2628	CASE ( 'qc' )
2629	IF ( .NOT. cloud_physics ) THEN
2630	message_string = 'data_output_pr = ' // &
2631	TRIM( data_output_pr(i) ) // ' is not imp' // &
2632	'lemented for cloud_physics = .FALSE.'
2633	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2634	ELSEIF ( icloud_scheme /= 0 ) THEN
2635	message_string = 'data_output_pr = ' // &
2636	TRIM( data_output_pr(i) ) // ' is not imp' // &
2637	'lemented for cloud_scheme /= seifert_beheng'
2638	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
2639	ELSE
2640	dopr_index(i) = 75
2641	dopr_unit(i) = 'kg/kg'
2642	hom(:,2,75,:) = SPREAD( zu, 2, statistic_regions+1 )
2643	ENDIF
2644
2645	CASE ( 'prr' )
2646	IF ( .NOT. cloud_physics ) THEN
2647	message_string = 'data_output_pr = ' // &
2648	TRIM( data_output_pr(i) ) // ' is not imp' // &
2649	'lemented for cloud_physics = .FALSE.'
2650	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2651	ELSEIF ( icloud_scheme /= 0 ) THEN
2652	message_string = 'data_output_pr = ' // &
2653	TRIM( data_output_pr(i) ) // ' is not imp' // &
2654	'lemented for cloud_scheme /= seifert_beheng'
2655	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
2656	ELSEIF ( .NOT. precipitation ) THEN
2657	message_string = 'data_output_pr = ' // &
2658	TRIM( data_output_pr(i) ) // ' is not imp' // &
2659	'lemented for precipitation = .FALSE.'
2660	CALL message( 'check_parameters', 'PA0361', 1, 2, 0, 6, 0 )
2661
2662	ELSE
2663	dopr_index(i) = 76
2664	dopr_unit(i) = 'kg/kg m/s'
2665	hom(:,2,76,:) = SPREAD( zu, 2, statistic_regions+1 )
2666	ENDIF
2667
2668	CASE DEFAULT
2669
2670	CALL user_check_data_output_pr( data_output_pr(i), i, unit )
2671
2672	IF ( unit == 'illegal' ) THEN
2673	IF ( data_output_pr_user(1) /= ' ' ) THEN
2674	message_string = 'illegal value for data_output_pr or ' // &
2675	'data_output_pr_user = "' // &
2676	TRIM( data_output_pr(i) ) // '"'
2677	CALL message( 'check_parameters', 'PA0097', 1, 2, 0, 6, 0 )
2678	ELSE
2679	message_string = 'illegal value for data_output_pr = "' // &
2680	TRIM( data_output_pr(i) ) // '"'
2681	CALL message( 'check_parameters', 'PA0098', 1, 2, 0, 6, 0 )
2682	ENDIF
2683	ENDIF
2684
2685	END SELECT
2686
2687	ENDDO
2688
2689
2690	!
2691	!-- Append user-defined data output variables to the standard data output
2692	IF ( data_output_user(1) /= ' ' ) THEN
2693	i = 1
2694	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
2695	i = i + 1
2696	ENDDO
2697	j = 1
2698	DO WHILE ( data_output_user(j) /= ' ' .AND. j <= 100 )
2699	IF ( i > 100 ) THEN
2700	message_string = 'number of output quantitities given by data' // &
2701	'_output and data_output_user exceeds the limit of 100'
2702	CALL message( 'check_parameters', 'PA0102', 1, 2, 0, 6, 0 )
2703	ENDIF
2704	data_output(i) = data_output_user(j)
2705	i = i + 1
2706	j = j + 1
2707	ENDDO
2708	ENDIF
2709
2710	!
2711	!-- Check and set steering parameters for 2d/3d data output and averaging
2712	i = 1
2713	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
2714	!
2715	!-- Check for data averaging
2716	ilen = LEN_TRIM( data_output(i) )
2717	j = 0 ! no data averaging
2718	IF ( ilen > 3 ) THEN
2719	IF ( data_output(i)(ilen-2:ilen) == '_av' ) THEN
2720	j = 1 ! data averaging
2721	data_output(i) = data_output(i)(1:ilen-3)
2722	ENDIF
2723	ENDIF
2724	!
2725	!-- Check for cross section or volume data
2726	ilen = LEN_TRIM( data_output(i) )
2727	k = 0 ! 3d data
2728	var = data_output(i)(1:ilen)
2729	IF ( ilen > 3 ) THEN
2730	IF ( data_output(i)(ilen-2:ilen) == '_xy' .OR. &
2731	data_output(i)(ilen-2:ilen) == '_xz' .OR. &
2732	data_output(i)(ilen-2:ilen) == '_yz' ) THEN
2733	k = 1 ! 2d data
2734	var = data_output(i)(1:ilen-3)
2735	ENDIF
2736	ENDIF
2737	!
2738	!-- Check for allowed value and set units
2739	SELECT CASE ( TRIM( var ) )
2740
2741	CASE ( 'e' )
2742	IF ( constant_diffusion ) THEN
2743	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2744	'res constant_diffusion = .FALSE.'
2745	CALL message( 'check_parameters', 'PA0103', 1, 2, 0, 6, 0 )
2746	ENDIF
2747	unit = 'm2/s2'
2748
2749	CASE ( 'lpt' )
2750	IF ( .NOT. cloud_physics ) THEN
2751	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2752	'res cloud_physics = .TRUE.'
2753	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2754	ENDIF
2755	unit = 'K'
2756
2757	CASE ( 'nr' )
2758	IF ( .NOT. cloud_physics ) THEN
2759	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2760	'res cloud_physics = .TRUE.'
2761	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2762	ELSEIF ( icloud_scheme /= 0 ) THEN
2763	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2764	'res cloud_scheme = seifert_beheng'
2765	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
2766	ENDIF
2767	unit = '1/m3'
2768
2769	CASE ( 'pc', 'pr' )
2770	IF ( .NOT. particle_advection ) THEN
2771	message_string = 'output of "' // TRIM( var ) // '" requir' // &
2772	'es a "particles_par"-NAMELIST in the parameter file (PARIN)'
2773	CALL message( 'check_parameters', 'PA0104', 1, 2, 0, 6, 0 )
2774	ENDIF
2775	IF ( TRIM( var ) == 'pc' ) unit = 'number'
2776	IF ( TRIM( var ) == 'pr' ) unit = 'm'
2777
2778	CASE ( 'prr' )
2779	IF ( .NOT. cloud_physics ) THEN
2780	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2781	'res cloud_physics = .TRUE.'
2782	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2783	ELSEIF ( icloud_scheme /= 0 ) THEN
2784	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2785	'res cloud_scheme = seifert_beheng'
2786	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
2787	ELSEIF ( .NOT. precipitation ) THEN
2788	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2789	'res precipitation = .TRUE.'
2790	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2791	ENDIF
2792	unit = 'kg/kg m/s'
2793
2794	CASE ( 'q', 'vpt' )
2795	IF ( .NOT. humidity ) THEN
2796	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2797	'res humidity = .TRUE.'
2798	CALL message( 'check_parameters', 'PA0105', 1, 2, 0, 6, 0 )
2799	ENDIF
2800	IF ( TRIM( var ) == 'q' ) unit = 'kg/kg'
2801	IF ( TRIM( var ) == 'vpt' ) unit = 'K'
2802
2803	CASE ( 'qc' )
2804	IF ( .NOT. cloud_physics ) THEN
2805	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2806	'res cloud_physics = .TRUE.'
2807	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2808	ELSEIF ( icloud_scheme /= 0 ) THEN
2809	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2810	'res cloud_scheme = seifert_beheng'
2811	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
2812	ENDIF
2813	unit = 'kg/kg'
2814
2815	CASE ( 'ql' )
2816	IF ( .NOT. ( cloud_physics .OR. cloud_droplets ) ) THEN
2817	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2818	'res cloud_physics = .TRUE. or cloud_droplets = .TRUE.'
2819	CALL message( 'check_parameters', 'PA0106', 1, 2, 0, 6, 0 )
2820	ENDIF
2821	unit = 'kg/kg'
2822
2823	CASE ( 'ql_c', 'ql_v', 'ql_vp' )
2824	IF ( .NOT. cloud_droplets ) THEN
2825	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2826	'res cloud_droplets = .TRUE.'
2827	CALL message( 'check_parameters', 'PA0107', 1, 2, 0, 6, 0 )
2828	ENDIF
2829	IF ( TRIM( var ) == 'ql_c' ) unit = 'kg/kg'
2830	IF ( TRIM( var ) == 'ql_v' ) unit = 'm3'
2831	IF ( TRIM( var ) == 'ql_vp' ) unit = 'none'
2832
2833	CASE ( 'qr' )
2834	IF ( .NOT. cloud_physics ) THEN
2835	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2836	'res cloud_physics = .TRUE.'
2837	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2838	ELSEIF ( icloud_scheme /= 0 ) THEN
2839	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2840	'res cloud_scheme = seifert_beheng'
2841	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
2842	ELSEIF ( .NOT. precipitation ) THEN
2843	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2844	'res precipitation = .TRUE.'
2845	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2846	ENDIF
2847	unit = 'kg/kg'
2848
2849	CASE ( 'qv' )
2850	IF ( .NOT. cloud_physics ) THEN
2851	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2852	'res cloud_physics = .TRUE.'
2853	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2854	ENDIF
2855	unit = 'kg/kg'
2856
2857	CASE ( 'rho' )
2858	IF ( .NOT. ocean ) THEN
2859	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2860	'res ocean = .TRUE.'
2861	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
2862	ENDIF
2863	unit = 'kg/m3'
2864
2865	CASE ( 's' )
2866	IF ( .NOT. passive_scalar ) THEN
2867	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2868	'res passive_scalar = .TRUE.'
2869	CALL message( 'check_parameters', 'PA0110', 1, 2, 0, 6, 0 )
2870	ENDIF
2871	unit = 'conc'
2872
2873	CASE ( 'sa' )
2874	IF ( .NOT. ocean ) THEN
2875	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2876	'res ocean = .TRUE.'
2877	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
2878	ENDIF
2879	unit = 'psu'
2880
2881	CASE ( 'u', 't', 'lwp', 'pra', 'prr', 'qsws', 'shf', 'z0', 'z0h*' )
2882	IF ( k == 0 .OR. data_output(i)(ilen-2:ilen) /= '_xy' ) THEN
2883	message_string = 'illegal value for data_output: "' // &
2884	TRIM( var ) // '" & only 2d-horizontal ' // &
2885	'cross sections are allowed for this value'
2886	CALL message( 'check_parameters', 'PA0111', 1, 2, 0, 6, 0 )
2887	ENDIF
2888	IF ( TRIM( var ) == 'lwp*' .AND. .NOT. cloud_physics ) THEN
2889	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2890	'res cloud_physics = .TRUE.'
2891	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2892	ENDIF
2893	IF ( TRIM( var ) == 'pra*' .AND. .NOT. precipitation ) THEN
2894	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2895	'res precipitation = .TRUE.'
2896	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2897	ENDIF
2898	IF ( TRIM( var ) == 'pra*' .AND. j == 1 ) THEN
2899	message_string = 'temporal averaging of precipitation ' // &
2900	'amount "' // TRIM( var ) // '" is not possible'
2901	CALL message( 'check_parameters', 'PA0113', 1, 2, 0, 6, 0 )
2902	ENDIF
2903	IF ( TRIM( var ) == 'prr*' .AND. .NOT. precipitation ) THEN
2904	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2905	'res precipitation = .TRUE.'
2906	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2907	ENDIF
2908	IF ( TRIM( var ) == 'qsws*' .AND. .NOT. humidity ) THEN
2909	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2910	'res humidity = .TRUE.'
2911	CALL message( 'check_parameters', 'PA0322', 1, 2, 0, 6, 0 )
2912	ENDIF
2913
2914	IF ( TRIM( var ) == 'lwp' ) unit = 'kg/kgm'
2915	IF ( TRIM( var ) == 'pra*' ) unit = 'mm'
2916	IF ( TRIM( var ) == 'prr*' ) unit = 'mm/s'
2917	IF ( TRIM( var ) == 'qsws*' ) unit = 'kgm/kgs'
2918	IF ( TRIM( var ) == 'shf' ) unit = 'Km/s'
2919	IF ( TRIM( var ) == 't*' ) unit = 'K'
2920	IF ( TRIM( var ) == 'u*' ) unit = 'm/s'
2921	IF ( TRIM( var ) == 'z0*' ) unit = 'm'
2922	IF ( TRIM( var ) == 'z0h*' ) unit = 'm'
2923
2924
2925	CASE ( 'p', 'pt', 'u', 'v', 'w' )
2926	IF ( TRIM( var ) == 'p' ) unit = 'Pa'
2927	IF ( TRIM( var ) == 'pt' ) unit = 'K'
2928	IF ( TRIM( var ) == 'u' ) unit = 'm/s'
2929	IF ( TRIM( var ) == 'v' ) unit = 'm/s'
2930	IF ( TRIM( var ) == 'w' ) unit = 'm/s'
2931	CONTINUE
2932
2933	CASE DEFAULT
2934	CALL user_check_data_output( var, unit )
2935
2936	IF ( unit == 'illegal' ) THEN
2937	IF ( data_output_user(1) /= ' ' ) THEN
2938	message_string = 'illegal value for data_output or ' // &
2939	'data_output_user = "' // TRIM( data_output(i) ) // '"'
2940	CALL message( 'check_parameters', 'PA0114', 1, 2, 0, 6, 0 )
2941	ELSE
2942	message_string = 'illegal value for data_output =' // &
2943	TRIM( data_output(i) ) // '"'
2944	CALL message( 'check_parameters', 'PA0115', 1, 2, 0, 6, 0 )
2945	ENDIF
2946	ENDIF
2947
2948	END SELECT
2949	!
2950	!-- Set the internal steering parameters appropriately
2951	IF ( k == 0 ) THEN
2952	do3d_no(j) = do3d_no(j) + 1
2953	do3d(j,do3d_no(j)) = data_output(i)
2954	do3d_unit(j,do3d_no(j)) = unit
2955	ELSE
2956	do2d_no(j) = do2d_no(j) + 1
2957	do2d(j,do2d_no(j)) = data_output(i)
2958	do2d_unit(j,do2d_no(j)) = unit
2959	IF ( data_output(i)(ilen-2:ilen) == '_xy' ) THEN
2960	data_output_xy(j) = .TRUE.
2961	ENDIF
2962	IF ( data_output(i)(ilen-2:ilen) == '_xz' ) THEN
2963	data_output_xz(j) = .TRUE.
2964	ENDIF
2965	IF ( data_output(i)(ilen-2:ilen) == '_yz' ) THEN
2966	data_output_yz(j) = .TRUE.
2967	ENDIF
2968	ENDIF
2969
2970	IF ( j == 1 ) THEN
2971	!
2972	!-- Check, if variable is already subject to averaging
2973	found = .FALSE.
2974	DO k = 1, doav_n
2975	IF ( TRIM( doav(k) ) == TRIM( var ) ) found = .TRUE.
2976	ENDDO
2977
2978	IF ( .NOT. found ) THEN
2979	doav_n = doav_n + 1
2980	doav(doav_n) = var
2981	ENDIF
2982	ENDIF
2983
2984	i = i + 1
2985	ENDDO
2986
2987	!
2988	!-- Averaged 2d or 3d output requires that an averaging interval has been set
2989	IF ( doav_n > 0 .AND. averaging_interval == 0.0 ) THEN
2990	WRITE( message_string, * ) 'output of averaged quantity "', &
2991	TRIM( doav(1) ), '_av" requires to set a ', &
2992	'non-zero & averaging interval'
2993	CALL message( 'check_parameters', 'PA0323', 1, 2, 0, 6, 0 )
2994	ENDIF
2995
2996	!
2997	!-- Check sectional planes and store them in one shared array
2998	IF ( ANY( section_xy > nz + 1 ) ) THEN
2999	WRITE( message_string, * ) 'section_xy must be <= nz + 1 = ', nz + 1
3000	CALL message( 'check_parameters', 'PA0319', 1, 2, 0, 6, 0 )
3001	ENDIF
3002	IF ( ANY( section_xz > ny + 1 ) ) THEN
3003	WRITE( message_string, * ) 'section_xz must be <= ny + 1 = ', ny + 1
3004	CALL message( 'check_parameters', 'PA0320', 1, 2, 0, 6, 0 )
3005	ENDIF
3006	IF ( ANY( section_yz > nx + 1 ) ) THEN
3007	WRITE( message_string, * ) 'section_yz must be <= nx + 1 = ', nx + 1
3008	CALL message( 'check_parameters', 'PA0321', 1, 2, 0, 6, 0 )
3009	ENDIF
3010	section(:,1) = section_xy
3011	section(:,2) = section_xz
3012	section(:,3) = section_yz
3013
3014	!
3015	!-- Upper plot limit for 2D vertical sections
3016	IF ( z_max_do2d == -1.0 ) z_max_do2d = zu(nzt)
3017	IF ( z_max_do2d < zu(nzb+1) .OR. z_max_do2d > zu(nzt) ) THEN
3018	WRITE( message_string, * ) 'z_max_do2d = ', z_max_do2d, &
3019	' must be >= ', zu(nzb+1), '(zu(nzb+1)) and <= ', zu(nzt), &
3020	' (zu(nzt))'
3021	CALL message( 'check_parameters', 'PA0116', 1, 2, 0, 6, 0 )
3022	ENDIF
3023
3024	!
3025	!-- Upper plot limit for 3D arrays
3026	IF ( nz_do3d == -9999 ) nz_do3d = nzt + 1
3027
3028	!
3029	!-- Determine and check accuracy for compressed 3D plot output
3030	IF ( do3d_compress ) THEN
3031	!
3032	!-- Compression only permissible on T3E machines
3033	IF ( host(1:3) /= 't3e' ) THEN
3034	message_string = 'do3d_compress = .TRUE. not allowed on host "' // &
3035	TRIM( host ) // '"'
3036	CALL message( 'check_parameters', 'PA0117', 1, 2, 0, 6, 0 )
3037	ENDIF
3038
3039	i = 1
3040	DO WHILE ( do3d_comp_prec(i) /= ' ' )
3041
3042	ilen = LEN_TRIM( do3d_comp_prec(i) )
3043	IF ( LLT( do3d_comp_prec(i)(ilen:ilen), '0' ) .OR. &
3044	LGT( do3d_comp_prec(i)(ilen:ilen), '9' ) ) THEN
3045	WRITE( message_string, * ) 'illegal precision: do3d_comp_prec', &
3046	'(', i, ') = "', TRIM(do3d_comp_prec(i)),'"'
3047	CALL message( 'check_parameters', 'PA0118', 1, 2, 0, 6, 0 )
3048	ENDIF
3049
3050	prec = IACHAR( do3d_comp_prec(i)(ilen:ilen) ) - IACHAR( '0' )
3051	var = do3d_comp_prec(i)(1:ilen-1)
3052
3053	SELECT CASE ( var )
3054
3055	CASE ( 'u' )
3056	j = 1
3057	CASE ( 'v' )
3058	j = 2
3059	CASE ( 'w' )
3060	j = 3
3061	CASE ( 'p' )
3062	j = 4
3063	CASE ( 'pt' )
3064	j = 5
3065
3066	CASE DEFAULT
3067	WRITE( message_string, * ) 'unknown variable "', &
3068	TRIM( do3d_comp_prec(i) ), '" given for do3d_comp_prec(', &
3069	i, ')'
3070	CALL message( 'check_parameters', 'PA0119', 1, 2, 0, 6, 0 )
3071
3072	END SELECT
3073
3074	plot_3d_precision(j)%precision = prec
3075	i = i + 1
3076
3077	ENDDO
3078	ENDIF
3079
3080	!
3081	!-- Check the data output format(s)
3082	IF ( data_output_format(1) == ' ' ) THEN
3083	!
3084	!-- Default value
3085	netcdf_output = .TRUE.
3086	ELSE
3087	i = 1
3088	DO WHILE ( data_output_format(i) /= ' ' )
3089
3090	SELECT CASE ( data_output_format(i) )
3091
3092	CASE ( 'netcdf' )
3093	netcdf_output = .TRUE.
3094	CASE ( 'iso2d' )
3095	iso2d_output = .TRUE.
3096	CASE ( 'avs' )
3097	avs_output = .TRUE.
3098
3099	CASE DEFAULT
3100	message_string = 'unknown value for data_output_format "' // &
3101	TRIM( data_output_format(i) ) // '"'
3102	CALL message( 'check_parameters', 'PA0120', 1, 2, 0, 6, 0 )
3103
3104	END SELECT
3105
3106	i = i + 1
3107	IF ( i > 10 ) EXIT
3108
3109	ENDDO
3110	ENDIF
3111
3112	!
3113	!-- Set output format string (used in header)
3114	IF ( netcdf_output ) THEN
3115
3116	SELECT CASE ( netcdf_data_format )
3117	CASE ( 1 )
3118	output_format_netcdf = 'netCDF classic'
3119	CASE ( 2 )
3120	output_format_netcdf = 'netCDF 64bit offset'
3121	CASE ( 3 )
3122	output_format_netcdf = 'netCDF4/HDF5'
3123	CASE ( 4 )
3124	output_format_netcdf = 'netCDF4/HDF5 classic'
3125	CASE ( 5 )
3126	output_format_netcdf = 'parallel netCDF4/HDF5'
3127	CASE ( 6 )
3128	output_format_netcdf = 'parallel netCDF4/HDF5 classic'
3129
3130	END SELECT
3131
3132	ENDIF
3133
3134	#if defined( __spectra )
3135	!
3136	!-- Check the number of spectra level to be output
3137	i = 1
3138	DO WHILE ( comp_spectra_level(i) /= 999999 .AND. i <= 100 )
3139	i = i + 1
3140	ENDDO
3141	i = i - 1
3142	IF ( i == 0 ) THEN
3143	WRITE( message_string, * ) 'no spectra levels given'
3144	CALL message( 'check_parameters', 'PA0019', 1, 2, 0, 6, 0 )
3145	ENDIF
3146	#endif
3147
3148	!
3149	!-- Check mask conditions
3150	DO mid = 1, max_masks
3151	IF ( data_output_masks(mid,1) /= ' ' .OR. &
3152	data_output_masks_user(mid,1) /= ' ' ) THEN
3153	masks = masks + 1
3154	ENDIF
3155	ENDDO
3156
3157	IF ( masks < 0 .OR. masks > max_masks ) THEN
3158	WRITE( message_string, * ) 'illegal value: masks must be >= 0 and ', &
3159	'<= ', max_masks, ' (=max_masks)'
3160	CALL message( 'check_parameters', 'PA0325', 1, 2, 0, 6, 0 )
3161	ENDIF
3162	IF ( masks > 0 ) THEN
3163	mask_scale(1) = mask_scale_x
3164	mask_scale(2) = mask_scale_y
3165	mask_scale(3) = mask_scale_z
3166	IF ( ANY( mask_scale <= 0.0 ) ) THEN
3167	WRITE( message_string, * ) &
3168	'illegal value: mask_scale_x, mask_scale_y and mask_scale_z', &
3169	'must be > 0.0'
3170	CALL message( 'check_parameters', 'PA0326', 1, 2, 0, 6, 0 )
3171	ENDIF
3172	!
3173	!-- Generate masks for masked data output
3174	CALL init_masks
3175	ENDIF
3176
3177	!
3178	!-- Check the NetCDF data format
3179	#if ! defined ( __check )
3180	IF ( netcdf_data_format > 2 ) THEN
3181	#if defined( __netcdf4 )
3182	CONTINUE
3183	#else
3184	message_string = 'netCDF: netCDF4 format requested but no ' // &
3185	'cpp-directive __netcdf4 given & switch ' // &
3186	'back to 64-bit offset format'
3187	CALL message( 'check_parameters', 'PA0171', 0, 1, 0, 6, 0 )
3188	netcdf_data_format = 2
3189	#endif
3190	ENDIF
3191	IF ( netcdf_data_format > 4 ) THEN
3192	#if defined( __netcdf4 ) && defined( __netcdf4_parallel )
3193	CONTINUE
3194	#else
3195	message_string = 'netCDF: netCDF4 parallel output requested but no ' // &
3196	'cpp-directive __netcdf4_parallel given & switch ' // &
3197	'back to netCDF4 non-parallel output'
3198	CALL message( 'check_parameters', 'PA0099', 0, 1, 0, 6, 0 )
3199	netcdf_data_format = netcdf_data_format - 2
3200	#endif
3201	ENDIF
3202	#endif
3203
3204	#if ! defined( __check )
3205	!
3206	!-- Check netcdf precison
3207	ldum = .FALSE.
3208	CALL define_netcdf_header( 'ch', ldum, 0 )
3209	#endif
3210	!
3211	!-- Check, whether a constant diffusion coefficient shall be used
3212	IF ( km_constant /= -1.0 ) THEN
3213	IF ( km_constant < 0.0 ) THEN
3214	WRITE( message_string, * ) 'km_constant = ', km_constant, ' < 0.0'
3215	CALL message( 'check_parameters', 'PA0121', 1, 2, 0, 6, 0 )
3216	ELSE
3217	IF ( prandtl_number < 0.0 ) THEN
3218	WRITE( message_string, * ) 'prandtl_number = ', prandtl_number, &
3219	' < 0.0'
3220	CALL message( 'check_parameters', 'PA0122', 1, 2, 0, 6, 0 )
3221	ENDIF
3222	constant_diffusion = .TRUE.
3223
3224	IF ( prandtl_layer ) THEN
3225	message_string = 'prandtl_layer is not allowed with fixed ' // &
3226	'value of km'
3227	CALL message( 'check_parameters', 'PA0123', 1, 2, 0, 6, 0 )
3228	ENDIF
3229	ENDIF
3230	ENDIF
3231
3232	!
3233	!-- In case of non-cyclic lateral boundaries and a damping layer for the
3234	!-- potential temperature, check the width of the damping layer
3235	IF ( bc_lr /= 'cyclic' ) THEN
3236	IF ( pt_damping_width < 0.0 .OR. pt_damping_width > REAL( nx * dx ) ) THEN
3237	message_string = 'pt_damping_width out of range'
3238	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
3239	ENDIF
3240	ENDIF
3241
3242	IF ( bc_ns /= 'cyclic' ) THEN
3243	IF ( pt_damping_width < 0.0 .OR. pt_damping_width > REAL( ny * dy ) ) THEN
3244	message_string = 'pt_damping_width out of range'
3245	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
3246	ENDIF
3247	ENDIF
3248
3249	!
3250	!-- Check value range for rif
3251	IF ( rif_min >= rif_max ) THEN
3252	WRITE( message_string, * ) 'rif_min = ', rif_min, ' must be less ', &
3253	'than rif_max = ', rif_max
3254	CALL message( 'check_parameters', 'PA0125', 1, 2, 0, 6, 0 )
3255	ENDIF
3256
3257	!
3258	!-- Determine upper and lower hight level indices for random perturbations
3259	IF ( disturbance_level_b == -9999999.9 ) THEN
3260	IF ( ocean ) THEN
3261	disturbance_level_b = zu((nzt*2)/3)
3262	disturbance_level_ind_b = ( nzt * 2 ) / 3
3263	ELSE
3264	disturbance_level_b = zu(nzb+3)
3265	disturbance_level_ind_b = nzb + 3
3266	ENDIF
3267	ELSEIF ( disturbance_level_b < zu(3) ) THEN
3268	WRITE( message_string, * ) 'disturbance_level_b = ', &
3269	disturbance_level_b, ' must be >= ', zu(3), '(zu(3))'
3270	CALL message( 'check_parameters', 'PA0126', 1, 2, 0, 6, 0 )
3271	ELSEIF ( disturbance_level_b > zu(nzt-2) ) THEN
3272	WRITE( message_string, * ) 'disturbance_level_b = ', &
3273	disturbance_level_b, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
3274	CALL message( 'check_parameters', 'PA0127', 1, 2, 0, 6, 0 )
3275	ELSE
3276	DO k = 3, nzt-2
3277	IF ( disturbance_level_b <= zu(k) ) THEN
3278	disturbance_level_ind_b = k
3279	EXIT
3280	ENDIF
3281	ENDDO
3282	ENDIF
3283
3284	IF ( disturbance_level_t == -9999999.9 ) THEN
3285	IF ( ocean ) THEN
3286	disturbance_level_t = zu(nzt-3)
3287	disturbance_level_ind_t = nzt - 3
3288	ELSE
3289	disturbance_level_t = zu(nzt/3)
3290	disturbance_level_ind_t = nzt / 3
3291	ENDIF
3292	ELSEIF ( disturbance_level_t > zu(nzt-2) ) THEN
3293	WRITE( message_string, * ) 'disturbance_level_t = ', &
3294	disturbance_level_t, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
3295	CALL message( 'check_parameters', 'PA0128', 1, 2, 0, 6, 0 )
3296	ELSEIF ( disturbance_level_t < disturbance_level_b ) THEN
3297	WRITE( message_string, * ) 'disturbance_level_t = ', &
3298	disturbance_level_t, ' must be >= disturbance_level_b = ', &
3299	disturbance_level_b
3300	CALL message( 'check_parameters', 'PA0129', 1, 2, 0, 6, 0 )
3301	ELSE
3302	DO k = 3, nzt-2
3303	IF ( disturbance_level_t <= zu(k) ) THEN
3304	disturbance_level_ind_t = k
3305	EXIT
3306	ENDIF
3307	ENDDO
3308	ENDIF
3309
3310	!
3311	!-- Check again whether the levels determined this way are ok.
3312	!-- Error may occur at automatic determination and too few grid points in
3313	!-- z-direction.
3314	IF ( disturbance_level_ind_t < disturbance_level_ind_b ) THEN
3315	WRITE( message_string, * ) 'disturbance_level_ind_t = ', &
3316	disturbance_level_ind_t, ' must be >= disturbance_level_b = ', &
3317	disturbance_level_b
3318	CALL message( 'check_parameters', 'PA0130', 1, 2, 0, 6, 0 )
3319	ENDIF
3320
3321	!
3322	!-- Determine the horizontal index range for random perturbations.
3323	!-- In case of non-cyclic horizontal boundaries, no perturbations are imposed
3324	!-- near the inflow and the perturbation area is further limited to ...(1)
3325	!-- after the initial phase of the flow.
3326	dist_nxl = 0; dist_nxr = nx
3327	dist_nys = 0; dist_nyn = ny
3328	IF ( bc_lr /= 'cyclic' ) THEN
3329	IF ( inflow_disturbance_begin == -1 ) THEN
3330	inflow_disturbance_begin = MIN( 10, nx/2 )
3331	ENDIF
3332	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > nx )&
3333	THEN
3334	message_string = 'inflow_disturbance_begin out of range'
3335	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
3336	ENDIF
3337	IF ( inflow_disturbance_end == -1 ) THEN
3338	inflow_disturbance_end = MIN( 100, 3*nx/4 )
3339	ENDIF
3340	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > nx ) &
3341	THEN
3342	message_string = 'inflow_disturbance_end out of range'
3343	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
3344	ENDIF
3345	ELSEIF ( bc_ns /= 'cyclic' ) THEN
3346	IF ( inflow_disturbance_begin == -1 ) THEN
3347	inflow_disturbance_begin = MIN( 10, ny/2 )
3348	ENDIF
3349	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > ny )&
3350	THEN
3351	message_string = 'inflow_disturbance_begin out of range'
3352	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
3353	ENDIF
3354	IF ( inflow_disturbance_end == -1 ) THEN
3355	inflow_disturbance_end = MIN( 100, 3*ny/4 )
3356	ENDIF
3357	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > ny ) &
3358	THEN
3359	message_string = 'inflow_disturbance_end out of range'
3360	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
3361	ENDIF
3362	ENDIF
3363
3364	IF ( bc_lr == 'radiation/dirichlet' ) THEN
3365	dist_nxr = nx - inflow_disturbance_begin
3366	dist_nxl(1) = nx - inflow_disturbance_end
3367	ELSEIF ( bc_lr == 'dirichlet/radiation' ) THEN
3368	dist_nxl = inflow_disturbance_begin
3369	dist_nxr(1) = inflow_disturbance_end
3370	ENDIF
3371	IF ( bc_ns == 'dirichlet/radiation' ) THEN
3372	dist_nyn = ny - inflow_disturbance_begin
3373	dist_nys(1) = ny - inflow_disturbance_end
3374	ELSEIF ( bc_ns == 'radiation/dirichlet' ) THEN
3375	dist_nys = inflow_disturbance_begin
3376	dist_nyn(1) = inflow_disturbance_end
3377	ENDIF
3378
3379	!
3380	!-- A turbulent inflow requires Dirichlet conditions at the respective inflow
3381	!-- boundary (so far, a turbulent inflow is realized from the left side only)
3382	IF ( turbulent_inflow .AND. bc_lr /= 'dirichlet/radiation' ) THEN
3383	message_string = 'turbulent_inflow = .T. requires a Dirichlet ' // &
3384	'condition at the inflow boundary'
3385	CALL message( 'check_parameters', 'PA0133', 1, 2, 0, 6, 0 )
3386	ENDIF
3387
3388	!
3389	!-- Turbulent inflow requires that 3d arrays have been cyclically filled with
3390	!-- data from prerun in the first main run
3391	IF ( turbulent_inflow .AND. initializing_actions /= 'cyclic_fill' .AND. &
3392	initializing_actions /= 'read_restart_data' ) THEN
3393	message_string = 'turbulent_inflow = .T. requires ' // &
3394	'initializing_actions = ''cyclic_fill'' '
3395	CALL message( 'check_parameters', 'PA0055', 1, 2, 0, 6, 0 )
3396	ENDIF
3397
3398	!
3399	!-- In case of turbulent inflow calculate the index of the recycling plane
3400	IF ( turbulent_inflow ) THEN
3401	IF ( recycling_width == 9999999.9 ) THEN
3402	!
3403	!-- Set the default value for the width of the recycling domain
3404	recycling_width = 0.1 * nx * dx
3405	ELSE
3406	IF ( recycling_width < dx .OR. recycling_width > nx * dx ) THEN
3407	WRITE( message_string, * ) 'illegal value for recycling_width:', &
3408	' ', recycling_width
3409	CALL message( 'check_parameters', 'PA0134', 1, 2, 0, 6, 0 )
3410	ENDIF
3411	ENDIF
3412	!
3413	!-- Calculate the index
3414	recycling_plane = recycling_width / dx
3415	ENDIF
3416
3417	!
3418	!-- Check random generator
3419	IF ( random_generator /= 'system-specific' .AND. &
3420	random_generator /= 'numerical-recipes' ) THEN
3421	message_string = 'unknown random generator: random_generator = "' // &
3422	TRIM( random_generator ) // '"'
3423	CALL message( 'check_parameters', 'PA0135', 1, 2, 0, 6, 0 )
3424	ENDIF
3425
3426	!
3427	!-- Determine damping level index for 1D model
3428	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
3429	IF ( damp_level_1d == -1.0 ) THEN
3430	damp_level_1d = zu(nzt+1)
3431	damp_level_ind_1d = nzt + 1
3432	ELSEIF ( damp_level_1d < 0.0 .OR. damp_level_1d > zu(nzt+1) ) THEN
3433	WRITE( message_string, * ) 'damp_level_1d = ', damp_level_1d, &
3434	' must be > 0.0 and < ', zu(nzt+1), '(zu(nzt+1))'
3435	CALL message( 'check_parameters', 'PA0136', 1, 2, 0, 6, 0 )
3436	ELSE
3437	DO k = 1, nzt+1
3438	IF ( damp_level_1d <= zu(k) ) THEN
3439	damp_level_ind_1d = k
3440	EXIT
3441	ENDIF
3442	ENDDO
3443	ENDIF
3444	ENDIF
3445
3446	!
3447	!-- Check some other 1d-model parameters
3448	IF ( TRIM( mixing_length_1d ) /= 'as_in_3d_model' .AND. &
3449	TRIM( mixing_length_1d ) /= 'blackadar' ) THEN
3450	message_string = 'mixing_length_1d = "' // TRIM( mixing_length_1d ) // &
3451	'" is unknown'
3452	CALL message( 'check_parameters', 'PA0137', 1, 2, 0, 6, 0 )
3453	ENDIF
3454	IF ( TRIM( dissipation_1d ) /= 'as_in_3d_model' .AND. &
3455	TRIM( dissipation_1d ) /= 'detering' ) THEN
3456	message_string = 'dissipation_1d = "' // TRIM( dissipation_1d ) // &
3457	'" is unknown'
3458	CALL message( 'check_parameters', 'PA0138', 1, 2, 0, 6, 0 )
3459	ENDIF
3460
3461	!
3462	!-- Set time for the next user defined restart (time_restart is the
3463	!-- internal parameter for steering restart events)
3464	IF ( restart_time /= 9999999.9 ) THEN
3465	IF ( restart_time > time_since_reference_point ) THEN
3466	time_restart = restart_time
3467	ENDIF
3468	ELSE
3469	!
3470	!-- In case of a restart run, set internal parameter to default (no restart)
3471	!-- if the NAMELIST-parameter restart_time is omitted
3472	time_restart = 9999999.9
3473	ENDIF
3474
3475	!
3476	!-- Set default value of the time needed to terminate a model run
3477	IF ( termination_time_needed == -1.0 ) THEN
3478	IF ( host(1:3) == 'ibm' ) THEN
3479	termination_time_needed = 300.0
3480	ELSE
3481	termination_time_needed = 35.0
3482	ENDIF
3483	ENDIF
3484
3485	!
3486	!-- Check the time needed to terminate a model run
3487	IF ( host(1:3) == 't3e' ) THEN
3488	!
3489	!-- Time needed must be at least 30 seconds on all CRAY machines, because
3490	!-- MPP_TREMAIN gives the remaining CPU time only in steps of 30 seconds
3491	IF ( termination_time_needed <= 30.0 ) THEN
3492	WRITE( message_string, * ) 'termination_time_needed = ', &
3493	termination_time_needed, ' must be > 30.0 on host "', &
3494	TRIM( host ), '"'
3495	CALL message( 'check_parameters', 'PA0139', 1, 2, 0, 6, 0 )
3496	ENDIF
3497	ELSEIF ( host(1:3) == 'ibm' ) THEN
3498	!
3499	!-- On IBM-regatta machines the time should be at least 300 seconds,
3500	!-- because the job time consumed before executing palm (for compiling,
3501	!-- copying of files, etc.) has to be regarded
3502	IF ( termination_time_needed < 300.0 ) THEN
3503	WRITE( message_string, * ) 'termination_time_needed = ', &
3504	termination_time_needed, ' should be >= 300.0 on host "', &
3505	TRIM( host ), '"'
3506	CALL message( 'check_parameters', 'PA0140', 1, 2, 0, 6, 0 )
3507	ENDIF
3508	ENDIF
3509
3510	!
3511	!-- Check pressure gradient conditions
3512	IF ( dp_external .AND. conserve_volume_flow ) THEN
3513	WRITE( message_string, * ) 'Both dp_external and conserve_volume_flo', &
3514	'w are .TRUE. but one of them must be .FALSE.'
3515	CALL message( 'check_parameters', 'PA0150', 1, 2, 0, 6, 0 )
3516	ENDIF
3517	IF ( dp_external ) THEN
3518	IF ( dp_level_b < zu(nzb) .OR. dp_level_b > zu(nzt) ) THEN
3519	WRITE( message_string, * ) 'dp_level_b = ', dp_level_b, ' is out ', &
3520	' of range'
3521	CALL message( 'check_parameters', 'PA0151', 1, 2, 0, 6, 0 )
3522	ENDIF
3523	IF ( .NOT. ANY( dpdxy /= 0.0 ) ) THEN
3524	WRITE( message_string, * ) 'dp_external is .TRUE. but dpdxy is ze', &
3525	'ro, i.e. the external pressure gradient & will not be applied'
3526	CALL message( 'check_parameters', 'PA0152', 0, 1, 0, 6, 0 )
3527	ENDIF
3528	ENDIF
3529	IF ( ANY( dpdxy /= 0.0 ) .AND. .NOT. dp_external ) THEN
3530	WRITE( message_string, * ) 'dpdxy is nonzero but dp_external is ', &
3531	'.FALSE., i.e. the external pressure gradient & will not be applied'
3532	CALL message( 'check_parameters', 'PA0153', 0, 1, 0, 6, 0 )
3533	ENDIF
3534	IF ( conserve_volume_flow ) THEN
3535	IF ( TRIM( conserve_volume_flow_mode ) == 'default' ) THEN
3536
3537	conserve_volume_flow_mode = 'initial_profiles'
3538
3539	ELSEIF ( TRIM( conserve_volume_flow_mode ) /= 'initial_profiles' .AND. &
3540	TRIM( conserve_volume_flow_mode ) /= 'inflow_profile' .AND. &
3541	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) THEN
3542	WRITE( message_string, * ) 'unknown conserve_volume_flow_mode: ', &
3543	conserve_volume_flow_mode
3544	CALL message( 'check_parameters', 'PA0154', 1, 2, 0, 6, 0 )
3545	ENDIF
3546	IF ( (bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic') .AND. &
3547	TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
3548	WRITE( message_string, * ) 'non-cyclic boundary conditions ', &
3549	'require conserve_volume_flow_mode = ''initial_profiles'''
3550	CALL message( 'check_parameters', 'PA0155', 1, 2, 0, 6, 0 )
3551	ENDIF
3552	IF ( bc_lr == 'cyclic' .AND. bc_ns == 'cyclic' .AND. &
3553	TRIM( conserve_volume_flow_mode ) == 'inflow_profile' ) THEN
3554	WRITE( message_string, * ) 'cyclic boundary conditions ', &
3555	'require conserve_volume_flow_mode = ''initial_profiles''', &
3556	' or ''bulk_velocity'''
3557	CALL message( 'check_parameters', 'PA0156', 1, 2, 0, 6, 0 )
3558	ENDIF
3559	ENDIF
3560	IF ( ( u_bulk /= 0.0 .OR. v_bulk /= 0.0 ) .AND. &
3561	( .NOT. conserve_volume_flow .OR. &
3562	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) ) THEN
3563	WRITE( message_string, * ) 'nonzero bulk velocity requires ', &
3564	'conserve_volume_flow = .T. and ', &
3565	'conserve_volume_flow_mode = ''bulk_velocity'''
3566	CALL message( 'check_parameters', 'PA0157', 1, 2, 0, 6, 0 )
3567	ENDIF
3568
3569	!
3570	!-- Check particle attributes
3571	IF ( particle_color /= 'none' ) THEN
3572	IF ( particle_color /= 'absuv' .AND. particle_color /= 'pt*' .AND. &
3573	particle_color /= 'z' ) THEN
3574	message_string = 'illegal value for parameter particle_color: ' // &
3575	TRIM( particle_color)
3576	CALL message( 'check_parameters', 'PA0313', 1, 2, 0, 6, 0 )
3577	ELSE
3578	IF ( color_interval(2) <= color_interval(1) ) THEN
3579	message_string = 'color_interval(2) <= color_interval(1)'
3580	CALL message( 'check_parameters', 'PA0315', 1, 2, 0, 6, 0 )
3581	ENDIF
3582	ENDIF
3583	ENDIF
3584
3585	IF ( particle_dvrpsize /= 'none' ) THEN
3586	IF ( particle_dvrpsize /= 'absw' ) THEN
3587	message_string = 'illegal value for parameter particle_dvrpsize:' // &
3588	' ' // TRIM( particle_color)
3589	CALL message( 'check_parameters', 'PA0314', 1, 2, 0, 6, 0 )
3590	ELSE
3591	IF ( dvrpsize_interval(2) <= dvrpsize_interval(1) ) THEN
3592	message_string = 'dvrpsize_interval(2) <= dvrpsize_interval(1)'
3593	CALL message( 'check_parameters', 'PA0316', 1, 2, 0, 6, 0 )
3594	ENDIF
3595	ENDIF
3596	ENDIF
3597
3598	!
3599	!-- Check &userpar parameters
3600	CALL user_check_parameters
3601
3602
3603
3604	END SUBROUTINE check_parameters

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |