Home

Context Navigation

source: palm/trunk/SOURCE/check_parameters.f90 @ 1175

Last change on this file since 1175 was 1175, checked in by gryschka, 11 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 138.6 KB

Line
1	SUBROUTINE check_parameters
2
3	!--------------------------------------------------------------------------------!
4	! This file is part of PALM.
5	!
6	! PALM is free software: you can redistribute it and/or modify it under the terms
7	! of the GNU General Public License as published by the Free Software Foundation,
8	! either version 3 of the License, or (at your option) any later version.
9	!
10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
13	!
14	! You should have received a copy of the GNU General Public License along with
15	! PALM. If not, see <http://www.gnu.org/licenses/>.
16	!
17	! Copyright 1997-2012 Leibniz University Hannover
18	!--------------------------------------------------------------------------------!
19	!
20	! Current revisions:
21	! -----------------
22	!
23	!
24	! Former revisions:
25	! -----------------
26	! $Id: check_parameters.f90 1175 2013-05-31 10:34:46Z gryschka $
27	!
28	! 1174 2013-05-31 10:28:08Z gryschka
29	! Bugfix in computing initial profiles for ug, vg, lad, q in case of Atmosphere
30	!
31	! 1159 2013-05-21 11:58:22Z fricke
32	! bc_lr/ns_dirneu/neudir removed
33	!
34	! 1115 2013-03-26 18:16:16Z hoffmann
35	! unused variables removed
36	! drizzle can be used without precipitation
37	!
38	! 1111 2013-03-08 23:54:10Z raasch
39	! ibc_p_b = 2 removed
40	!
41	! 1103 2013-02-20 02:15:53Z raasch
42	! Bugfix: turbulent inflow must not require cyclic fill in restart runs
43	!
44	! 1092 2013-02-02 11:24:22Z raasch
45	! unused variables removed
46	!
47	! 1069 2012-11-28 16:18:43Z maronga
48	! allow usage of topography in combination with cloud physics
49	!
50	! 1065 2012-11-22 17:42:36Z hoffmann
51	! Bugfix: It is not allowed to use cloud_scheme = seifert_beheng without
52	! precipitation in order to save computational resources.
53	!
54	! 1060 2012-11-21 07:19:51Z raasch
55	! additional check for parameter turbulent_inflow
56	!
57	! 1053 2012-11-13 17:11:03Z hoffmann
58	! necessary changes for the new two-moment cloud physics scheme added:
59	! - check cloud physics scheme (Kessler or Seifert and Beheng)
60	! - plant_canopy is not allowed
61	! - currently, only cache loop_optimization is allowed
62	! - initial profiles of nr, qr
63	! - boundary condition of nr, qr
64	! - check output quantities (qr, nr, prr)
65	!
66	! 1036 2012-10-22 13:43:42Z raasch
67	! code put under GPL (PALM 3.9)
68	!
69	! 1031/1034 2012-10-22 11:32:49Z raasch
70	! check of netcdf4 parallel file support
71	!
72	! 1019 2012-09-28 06:46:45Z raasch
73	! non-optimized version of prognostic_equations not allowed any more
74	!
75	! 1015 2012-09-27 09:23:24Z raasch
76	! acc allowed for loop optimization,
77	! checks for adjustment of mixing length to the Prandtl mixing length removed
78	!
79	! 1003 2012-09-14 14:35:53Z raasch
80	! checks for cases with unequal subdomain sizes removed
81	!
82	! 1001 2012-09-13 14:08:46Z raasch
83	! all actions concerning leapfrog- and upstream-spline-scheme removed
84	!
85	! 996 2012-09-07 10:41:47Z raasch
86	! little reformatting
87
88	! 978 2012-08-09 08:28:32Z fricke
89	! setting of bc_lr/ns_dirneu/neudir
90	! outflow damping layer removed
91	! check for z0h*
92	! check for pt_damping_width
93	!
94	! 964 2012-07-26 09:14:24Z raasch
95	! check of old profil-parameters removed
96	!
97	! 940 2012-07-09 14:31:00Z raasch
98	! checks for parameter neutral
99	!
100	! 924 2012-06-06 07:44:41Z maronga
101	! Bugfix: preprocessor directives caused error during compilation
102	!
103	! 892 2012-05-02 13:51:44Z maronga
104	! Bugfix for parameter file check ( excluding __netcdf4 )
105	!
106	! 866 2012-03-28 06:44:41Z raasch
107	! use only 60% of the geostrophic wind as translation speed in case of Galilean
108	! transformation and use_ug_for_galilei_tr = .T. in order to mimimize the
109	! timestep
110	!
111	! 861 2012-03-26 14:18:34Z suehring
112	! Check for topography and ws-scheme removed.
113	! Check for loop_optimization = 'vector' and ws-scheme removed.
114	!
115	! 845 2012-03-07 10:23:05Z maronga
116	! Bugfix: exclude __netcdf4 directive part from namelist file check compilation
117	!
118	! 828 2012-02-21 12:00:36Z raasch
119	! check of collision_kernel extended
120	!
121	! 825 2012-02-19 03:03:44Z raasch
122	! check for collision_kernel and curvature_solution_effects
123	!
124	! 809 2012-01-30 13:32:58Z maronga
125	! Bugfix: replaced .AND. and .NOT. with && and ! in the preprocessor directives
126	!
127	! 807 2012-01-25 11:53:51Z maronga
128	! New cpp directive "__check" implemented which is used by check_namelist_files
129	!
130	! 774 2011-10-27 13:34:16Z letzel
131	! bugfix for prescribed u,v-profiles
132	!
133	! 767 2011-10-14 06:39:12Z raasch
134	! Calculating u,v-profiles from given profiles by linear interpolation.
135	! bugfix: dirichlet_0 conditions for ug/vg moved from init_3d_model to here
136	!
137	! 707 2011-03-29 11:39:40Z raasch
138	! setting of bc_lr/ns_dirrad/raddir
139	!
140	! 689 2011-02-20 19:31:12z gryschka
141	! Bugfix for some logical expressions
142	! (syntax was not compatible with all compilers)
143	!
144	! 680 2011-02-04 23:16:06Z gryschka
145	! init_vortex is not allowed with volume_flow_control
146	!
147	! 673 2011-01-18 16:19:48Z suehring
148	! Declaration of ws_scheme_sca and ws_scheme_mom added (moved from advec_ws).
149	!
150	! 667 2010-12-23 12:06:00Z suehring/gryschka
151	! Exchange of parameters between ocean and atmosphere via PE0
152	! Check for illegal combination of ws-scheme and timestep scheme.
153	! Check for topography and ws-scheme.
154	! Check for not cyclic boundary conditions in combination with ws-scheme and
155	! loop_optimization = 'vector'.
156	! Check for call_psolver_at_all_substeps and ws-scheme for momentum_advec.
157	! Different processor/grid topology in atmosphere and ocean is now allowed!
158	! Bugfixes in checking for conserve_volume_flow_mode
159	! 600 2010-11-24 16:10:51Z raasch
160	! change due to new default value of surface_waterflux
161	! 580 2010-10-05 13:59:11Z heinze
162	! renaming of ws_vertical_gradient_level to subs_vertical_gradient_level
163	!
164	! 567 2010-10-01 10:46:30Z helmke
165	! calculating masks changed
166	!
167	! 564 2010-09-30 13:18:59Z helmke
168	! palm message identifiers of masked output changed, 20 replaced by max_masks
169	!
170	! 553 2010-09-01 14:09:06Z weinreis
171	! masks is calculated and removed from inipar
172	!
173	! 531 2010-04-21 06:47:21Z heinze
174	! Bugfix: unit of hyp changed to dbar
175	!
176	! 524 2010-03-30 02:04:51Z raasch
177	! Bugfix: "/" in netcdf profile variable names replaced by ":"
178	!
179	! 493 2010-03-01 08:30:24Z raasch
180	! netcdf_data_format is checked
181	!
182	! 411 2009-12-11 14:15:58Z heinze
183	! Enabled passive scalar/humidity wall fluxes for non-flat topography
184	! Initialization of large scale vertical motion (subsidence/ascent)
185	!
186	! 410 2009-12-04 17:05:40Z letzel
187	! masked data output
188	!
189	! 388 2009-09-23 09:40:33Z raasch
190	! Check profiles fpr prho and hyp.
191	! Bugfix: output of averaged 2d/3d quantities requires that an avaraging
192	! interval has been set, respective error message is included
193	! bc_lr_cyc and bc_ns_cyc are set,
194	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
195	! Check for illegal entries in section_xy\|xz\|yz that exceed nz+1\|ny+1\|nx+1
196	! Coupling with independent precursor runs.
197	! Check particle_color, particle_dvrpsize, color_interval, dvrpsize_interval
198	! Bugfix: pressure included for profile output
199	! Check pressure gradient conditions
200	! topography_grid_convention moved from user_check_parameters
201	! 'single_street_canyon'
202	! Added shf* and qsws* to the list of available output data
203	!
204	! 222 2009-01-12 16:04:16Z letzel
205	! +user_check_parameters
206	! Output of messages replaced by message handling routine.
207	! Implementation of an MPI-1 coupling: replaced myid with target_id,
208	! deleted __mpi2 directives
209	! Check that PALM is called with mrun -K parallel for coupling
210	!
211	! 197 2008-09-16 15:29:03Z raasch
212	! Bug fix: Construction of vertical profiles when 10 gradients have been
213	! specified in the parameter list (ug, vg, pt, q, sa, lad)
214	!
215	! Strict grid matching along z is not needed for mg-solver.
216	! Leaf area density (LAD) explicitly set to its surface value at k=0
217	! Case of reading data for recycling included in initializing_actions,
218	! check of turbulent_inflow and calculation of recycling_plane.
219	! q*2 profile added
220	!
221	! 138 2007-11-28 10:03:58Z letzel
222	! Plant canopy added
223	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
224	! Multigrid solver allows topography, checking of dt_sort_particles
225	! Bugfix: initializing u_init and v_init in case of ocean runs
226	!
227	! 109 2007-08-28 15:26:47Z letzel
228	! Check coupling_mode and set default (obligatory) values (like boundary
229	! conditions for temperature and fluxes) in case of coupled runs.
230	! +profiles for wp and w"e
231	! Bugfix: Error message concerning output of particle concentration (pc)
232	! modified
233	! More checks and more default values for coupled runs
234	! allow data_output_pr= q, wq, w"q", wq for humidity = .T. (instead of
235	! cloud_physics = .T.)
236	! Rayleigh damping for ocean fixed.
237	! Check and, if necessary, set default value for dt_coupling
238	!
239	! 97 2007-06-21 08:23:15Z raasch
240	! Initial salinity profile is calculated, salinity boundary conditions are
241	! checked,
242	! z_max_do1d is checked only in case of ocean = .f.,
243	! +initial temperature and geostrophic velocity profiles for the ocean version,
244	! use_pt_reference renamed use_reference
245	!
246	! 89 2007-05-25 12:08:31Z raasch
247	! Check for user-defined profiles
248	!
249	! 75 2007-03-22 09:54:05Z raasch
250	! "by_user" allowed as initializing action, -data_output_ts,
251	! leapfrog with non-flat topography not allowed any more, loop_optimization
252	! and pt_reference are checked, moisture renamed humidity,
253	! output of precipitation amount/rate and roughnes length + check
254	! possible negative humidities are avoided in initial profile,
255	! dirichlet/neumann changed to dirichlet/radiation, etc.,
256	! revision added to run_description_header
257	!
258	! 20 2007-02-26 00:12:32Z raasch
259	! Temperature and humidity gradients at top are now calculated for nzt+1,
260	! top_heatflux and respective boundary condition bc_pt_t is checked
261	!
262	! RCS Log replace by Id keyword, revision history cleaned up
263	!
264	! Revision 1.61 2006/08/04 14:20:25 raasch
265	! do2d_unit and do3d_unit now defined as 2d-arrays, check of
266	! use_upstream_for_tke, default value for dt_dopts,
267	! generation of file header moved from routines palm and header to here
268	!
269	! Revision 1.1 1997/08/26 06:29:23 raasch
270	! Initial revision
271	!
272	!
273	! Description:
274	! ------------
275	! Check control parameters and deduce further quantities.
276	!------------------------------------------------------------------------------!
277
278	USE arrays_3d
279	USE cloud_parameters
280	USE constants
281	USE control_parameters
282	USE dvrp_variables
283	USE grid_variables
284	USE indices
285	USE model_1d
286	USE netcdf_control
287	USE particle_attributes
288	USE pegrid
289	USE profil_parameter
290	USE subsidence_mod
291	USE statistics
292	USE transpose_indices
293
294	IMPLICIT NONE
295
296	CHARACTER (LEN=1) :: sq
297	CHARACTER (LEN=6) :: var
298	CHARACTER (LEN=7) :: unit
299	CHARACTER (LEN=8) :: date
300	CHARACTER (LEN=10) :: time
301	CHARACTER (LEN=40) :: coupling_string
302	CHARACTER (LEN=100) :: action
303
304	INTEGER :: i, ilen, iremote = 0, j, k, kk, position, prec
305	LOGICAL :: found, ldum
306	REAL :: gradient, remote = 0.0, simulation_time_since_reference
307
308	!
309	!-- Warning, if host is not set
310	IF ( host(1:1) == ' ' ) THEN
311	message_string = '"host" is not set. Please check that environment ' // &
312	'variable "localhost" & is set before running PALM'
313	CALL message( 'check_parameters', 'PA0001', 0, 0, 0, 6, 0 )
314	ENDIF
315
316	!
317	!-- Check the coupling mode
318	IF ( coupling_mode /= 'uncoupled' .AND. &
319	coupling_mode /= 'atmosphere_to_ocean' .AND. &
320	coupling_mode /= 'ocean_to_atmosphere' ) THEN
321	message_string = 'illegal coupling mode: ' // TRIM( coupling_mode )
322	CALL message( 'check_parameters', 'PA0002', 1, 2, 0, 6, 0 )
323	ENDIF
324
325	!
326	!-- Check dt_coupling, restart_time, dt_restart, end_time, dx, dy, nx and ny
327	IF ( coupling_mode /= 'uncoupled') THEN
328
329	IF ( dt_coupling == 9999999.9 ) THEN
330	message_string = 'dt_coupling is not set but required for coup' // &
331	'ling mode "' // TRIM( coupling_mode ) // '"'
332	CALL message( 'check_parameters', 'PA0003', 1, 2, 0, 6, 0 )
333	ENDIF
334
335	#if defined( __parallel )
336
337	!
338	!-- NOTE: coupled runs have not been implemented in the check_namelist_files
339	!-- program.
340	!-- check_namelist_files will need the following information of the other
341	!-- model (atmosphere/ocean).
342	! dt_coupling = remote
343	! dt_max = remote
344	! restart_time = remote
345	! dt_restart= remote
346	! simulation_time_since_reference = remote
347	! dx = remote
348
349
350	#if ! defined( __check )
351	IF ( myid == 0 ) THEN
352	CALL MPI_SEND( dt_coupling, 1, MPI_REAL, target_id, 11, comm_inter, &
353	ierr )
354	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 11, comm_inter, &
355	status, ierr )
356	ENDIF
357	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
358	#endif
359	IF ( dt_coupling /= remote ) THEN
360	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
361	'": dt_coupling = ', dt_coupling, '& is not equal to ', &
362	'dt_coupling_remote = ', remote
363	CALL message( 'check_parameters', 'PA0004', 1, 2, 0, 6, 0 )
364	ENDIF
365	IF ( dt_coupling <= 0.0 ) THEN
366	#if ! defined( __check )
367	IF ( myid == 0 ) THEN
368	CALL MPI_SEND( dt_max, 1, MPI_REAL, target_id, 19, comm_inter, ierr )
369	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 19, comm_inter, &
370	status, ierr )
371	ENDIF
372	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
373	#endif
374	dt_coupling = MAX( dt_max, remote )
375	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
376	'": dt_coupling <= 0.0 & is not allowed and is reset to ', &
377	'MAX(dt_max(A,O)) = ', dt_coupling
378	CALL message( 'check_parameters', 'PA0005', 0, 1, 0, 6, 0 )
379	ENDIF
380	#if ! defined( __check )
381	IF ( myid == 0 ) THEN
382	CALL MPI_SEND( restart_time, 1, MPI_REAL, target_id, 12, comm_inter, &
383	ierr )
384	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 12, comm_inter, &
385	status, ierr )
386	ENDIF
387	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
388	#endif
389	IF ( restart_time /= remote ) THEN
390	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
391	'": restart_time = ', restart_time, '& is not equal to ', &
392	'restart_time_remote = ', remote
393	CALL message( 'check_parameters', 'PA0006', 1, 2, 0, 6, 0 )
394	ENDIF
395	#if ! defined( __check )
396	IF ( myid == 0 ) THEN
397	CALL MPI_SEND( dt_restart, 1, MPI_REAL, target_id, 13, comm_inter, &
398	ierr )
399	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 13, comm_inter, &
400	status, ierr )
401	ENDIF
402	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
403	#endif
404	IF ( dt_restart /= remote ) THEN
405	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
406	'": dt_restart = ', dt_restart, '& is not equal to ', &
407	'dt_restart_remote = ', remote
408	CALL message( 'check_parameters', 'PA0007', 1, 2, 0, 6, 0 )
409	ENDIF
410
411	simulation_time_since_reference = end_time - coupling_start_time
412	#if ! defined( __check )
413	IF ( myid == 0 ) THEN
414	CALL MPI_SEND( simulation_time_since_reference, 1, MPI_REAL, target_id, &
415	14, comm_inter, ierr )
416	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 14, comm_inter, &
417	status, ierr )
418	ENDIF
419	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
420	#endif
421	IF ( simulation_time_since_reference /= remote ) THEN
422	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
423	'": simulation_time_since_reference = ', &
424	simulation_time_since_reference, '& is not equal to ', &
425	'simulation_time_since_reference_remote = ', remote
426	CALL message( 'check_parameters', 'PA0008', 1, 2, 0, 6, 0 )
427	ENDIF
428
429	#if ! defined( __check )
430	IF ( myid == 0 ) THEN
431	CALL MPI_SEND( dx, 1, MPI_REAL, target_id, 15, comm_inter, ierr )
432	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 15, comm_inter, &
433	status, ierr )
434	ENDIF
435	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
436
437	#endif
438	IF ( coupling_mode == 'atmosphere_to_ocean') THEN
439
440	IF ( dx < remote ) THEN
441	WRITE( message_string, * ) 'coupling mode "', &
442	TRIM( coupling_mode ), &
443	'": dx in Atmosphere is not equal to or not larger then dx in ocean'
444	CALL message( 'check_parameters', 'PA0009', 1, 2, 0, 6, 0 )
445	ENDIF
446
447	IF ( (nx_a+1)dx /= (nx_o+1)remote ) THEN
448	WRITE( message_string, * ) 'coupling mode "', &
449	TRIM( coupling_mode ), &
450	'": Domain size in x-direction is not equal in ocean and atmosphere'
451	CALL message( 'check_parameters', 'PA0010', 1, 2, 0, 6, 0 )
452	ENDIF
453
454	ENDIF
455
456	#if ! defined( __check )
457	IF ( myid == 0) THEN
458	CALL MPI_SEND( dy, 1, MPI_REAL, target_id, 16, comm_inter, ierr )
459	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 16, comm_inter, &
460	status, ierr )
461	ENDIF
462	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
463	#endif
464	IF ( coupling_mode == 'atmosphere_to_ocean') THEN
465
466	IF ( dy < remote ) THEN
467	WRITE( message_string, * ) 'coupling mode "', &
468	TRIM( coupling_mode ), &
469	'": dy in Atmosphere is not equal to or not larger then dy in ocean'
470	CALL message( 'check_parameters', 'PA0011', 1, 2, 0, 6, 0 )
471	ENDIF
472
473	IF ( (ny_a+1)dy /= (ny_o+1)remote ) THEN
474	WRITE( message_string, * ) 'coupling mode "', &
475	TRIM( coupling_mode ), &
476	'": Domain size in y-direction is not equal in ocean and atmosphere'
477	CALL message( 'check_parameters', 'PA0012', 1, 2, 0, 6, 0 )
478	ENDIF
479
480	IF ( MOD(nx_o+1,nx_a+1) /= 0 ) THEN
481	WRITE( message_string, * ) 'coupling mode "', &
482	TRIM( coupling_mode ), &
483	'": nx+1 in ocean is not divisible without remainder with nx+1 in', &
484	' atmosphere'
485	CALL message( 'check_parameters', 'PA0339', 1, 2, 0, 6, 0 )
486	ENDIF
487
488	IF ( MOD(ny_o+1,ny_a+1) /= 0 ) THEN
489	WRITE( message_string, * ) 'coupling mode "', &
490	TRIM( coupling_mode ), &
491	'": ny+1 in ocean is not divisible without remainder with ny+1 in', &
492	' atmosphere'
493	CALL message( 'check_parameters', 'PA0340', 1, 2, 0, 6, 0 )
494	ENDIF
495
496	ENDIF
497	#else
498	WRITE( message_string, * ) 'coupling requires PALM to be called with', &
499	' ''mrun -K parallel'''
500	CALL message( 'check_parameters', 'PA0141', 1, 2, 0, 6, 0 )
501	#endif
502	ENDIF
503
504	#if defined( __parallel ) && ! defined ( __check )
505	!
506	!-- Exchange via intercommunicator
507	IF ( coupling_mode == 'atmosphere_to_ocean' .AND. myid == 0 ) THEN
508	CALL MPI_SEND( humidity, 1, MPI_LOGICAL, target_id, 19, comm_inter, &
509	ierr )
510	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' .AND. myid == 0) THEN
511	CALL MPI_RECV( humidity_remote, 1, MPI_LOGICAL, target_id, 19, &
512	comm_inter, status, ierr )
513	ENDIF
514	CALL MPI_BCAST( humidity_remote, 1, MPI_LOGICAL, 0, comm2d, ierr)
515
516	#endif
517
518
519	!
520	!-- Generate the file header which is used as a header for most of PALM's
521	!-- output files
522	CALL DATE_AND_TIME( date, time )
523	run_date = date(7:8)//'-'//date(5:6)//'-'//date(3:4)
524	run_time = time(1:2)//':'//time(3:4)//':'//time(5:6)
525	IF ( coupling_mode == 'uncoupled' ) THEN
526	coupling_string = ''
527	ELSEIF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
528	coupling_string = ' coupled (atmosphere)'
529	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
530	coupling_string = ' coupled (ocean)'
531	ENDIF
532
533	WRITE ( run_description_header, &
534	'(A,2X,A,2X,A,A,A,I2.2,A,2X,A,A,2X,A,1X,A)' ) &
535	TRIM( version ), TRIM( revision ), 'run: ', &
536	TRIM( run_identifier ), '.', runnr, TRIM( coupling_string ), &
537	'host: ', TRIM( host ), run_date, run_time
538
539	!
540	!-- Check the general loop optimization method
541	IF ( loop_optimization == 'default' ) THEN
542	IF ( host(1:3) == 'nec' ) THEN
543	loop_optimization = 'vector'
544	ELSE
545	loop_optimization = 'cache'
546	ENDIF
547	ENDIF
548
549	SELECT CASE ( TRIM( loop_optimization ) )
550
551	CASE ( 'acc', 'cache', 'vector' )
552	CONTINUE
553
554	CASE DEFAULT
555	message_string = 'illegal value given for loop_optimization: "' // &
556	TRIM( loop_optimization ) // '"'
557	CALL message( 'check_parameters', 'PA0013', 1, 2, 0, 6, 0 )
558
559	END SELECT
560
561	!
562	!-- Check topography setting (check for illegal parameter combinations)
563	IF ( topography /= 'flat' ) THEN
564	action = ' '
565	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'ws-scheme') THEN
566	WRITE( action, '(A,A)' ) 'scalar_advec = ', scalar_advec
567	ENDIF
568	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme' ) &
569	THEN
570	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
571	ENDIF
572	IF ( psolver == 'sor' ) THEN
573	WRITE( action, '(A,A)' ) 'psolver = ', psolver
574	ENDIF
575	IF ( sloping_surface ) THEN
576	WRITE( action, '(A)' ) 'sloping surface = .TRUE.'
577	ENDIF
578	IF ( galilei_transformation ) THEN
579	WRITE( action, '(A)' ) 'galilei_transformation = .TRUE.'
580	ENDIF
581	IF ( cloud_physics ) THEN
582	WRITE( action, '(A)' ) 'cloud_physics = .TRUE.'
583	ENDIF
584	IF ( cloud_droplets ) THEN
585	WRITE( action, '(A)' ) 'cloud_droplets = .TRUE.'
586	ENDIF
587	IF ( .NOT. prandtl_layer ) THEN
588	WRITE( action, '(A)' ) 'prandtl_layer = .FALSE.'
589	ENDIF
590	IF ( action /= ' ' ) THEN
591	message_string = 'a non-flat topography does not allow ' // &
592	TRIM( action )
593	CALL message( 'check_parameters', 'PA0014', 1, 2, 0, 6, 0 )
594	ENDIF
595	!
596	!-- In case of non-flat topography, check whether the convention how to
597	!-- define the topography grid has been set correctly, or whether the default
598	!-- is applicable. If this is not possible, abort.
599	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
600	IF ( TRIM( topography ) /= 'single_building' .AND. &
601	TRIM( topography ) /= 'single_street_canyon' .AND. &
602	TRIM( topography ) /= 'read_from_file' ) THEN
603	!-- The default value is not applicable here, because it is only valid
604	!-- for the two standard cases 'single_building' and 'read_from_file'
605	!-- defined in init_grid.
606	WRITE( message_string, * ) &
607	'The value for "topography_grid_convention" ', &
608	'is not set. Its default value is & only valid for ', &
609	'"topography" = ''single_building'', ', &
610	'''single_street_canyon'' & or ''read_from_file''.', &
611	' & Choose ''cell_edge'' or ''cell_center''.'
612	CALL message( 'user_check_parameters', 'PA0239', 1, 2, 0, 6, 0 )
613	ELSE
614	!-- The default value is applicable here.
615	!-- Set convention according to topography.
616	IF ( TRIM( topography ) == 'single_building' .OR. &
617	TRIM( topography ) == 'single_street_canyon' ) THEN
618	topography_grid_convention = 'cell_edge'
619	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
620	topography_grid_convention = 'cell_center'
621	ENDIF
622	ENDIF
623	ELSEIF ( TRIM( topography_grid_convention ) /= 'cell_edge' .AND. &
624	TRIM( topography_grid_convention ) /= 'cell_center' ) THEN
625	WRITE( message_string, * ) &
626	'The value for "topography_grid_convention" is ', &
627	'not recognized. & Choose ''cell_edge'' or ''cell_center''.'
628	CALL message( 'user_check_parameters', 'PA0240', 1, 2, 0, 6, 0 )
629	ENDIF
630
631	ENDIF
632
633	!
634	!-- Check ocean setting
635	IF ( ocean ) THEN
636
637	action = ' '
638	IF ( action /= ' ' ) THEN
639	message_string = 'ocean = .T. does not allow ' // TRIM( action )
640	CALL message( 'check_parameters', 'PA0015', 1, 2, 0, 6, 0 )
641	ENDIF
642
643	ELSEIF ( TRIM( coupling_mode ) == 'uncoupled' .AND. &
644	TRIM( coupling_char ) == '_O' ) THEN
645
646	!
647	!-- Check whether an (uncoupled) atmospheric run has been declared as an
648	!-- ocean run (this setting is done via mrun-option -y)
649
650	message_string = 'ocean = .F. does not allow coupling_char = "' // &
651	TRIM( coupling_char ) // '" set by mrun-option "-y"'
652	CALL message( 'check_parameters', 'PA0317', 1, 2, 0, 6, 0 )
653
654	ENDIF
655	!
656	!-- Check cloud scheme
657	IF ( cloud_scheme == 'seifert_beheng' ) THEN
658	icloud_scheme = 0
659	ELSEIF ( cloud_scheme == 'kessler' ) THEN
660	icloud_scheme = 1
661	ELSE
662	message_string = 'unknown cloud microphysics scheme cloud_scheme ="' // &
663	TRIM( cloud_scheme ) // '"'
664	CALL message( 'check_parameters', 'PA0357', 1, 2, 0, 6, 0 )
665	ENDIF
666	!
667	!-- Check whether there are any illegal values
668	!-- Pressure solver:
669	IF ( psolver /= 'poisfft' .AND. psolver /= 'poisfft_hybrid' .AND. &
670	psolver /= 'sor' .AND. psolver /= 'multigrid' ) THEN
671	message_string = 'unknown solver for perturbation pressure: psolver' // &
672	' = "' // TRIM( psolver ) // '"'
673	CALL message( 'check_parameters', 'PA0016', 1, 2, 0, 6, 0 )
674	ENDIF
675
676	#if defined( __parallel )
677	IF ( psolver == 'poisfft_hybrid' .AND. pdims(2) /= 1 ) THEN
678	message_string = 'psolver = "' // TRIM( psolver ) // '" only works ' // &
679	'for a 1d domain-decomposition along x & please do' // &
680	' not set npey/=1 in the parameter file'
681	CALL message( 'check_parameters', 'PA0017', 1, 2, 0, 6, 0 )
682	ENDIF
683	#else
684	IF ( psolver == 'poisfft_hybrid' ) THEN
685	message_string = 'psolver = "' // TRIM( psolver ) // '" only works' // &
686	' for a parallel environment'
687	CALL message( 'check_parameters', 'PA0019', 1, 2, 0, 6, 0 )
688	ENDIF
689	#endif
690
691	IF ( psolver == 'multigrid' ) THEN
692	IF ( cycle_mg == 'w' ) THEN
693	gamma_mg = 2
694	ELSEIF ( cycle_mg == 'v' ) THEN
695	gamma_mg = 1
696	ELSE
697	message_string = 'unknown multigrid cycle: cycle_mg = "' // &
698	TRIM( cycle_mg ) // '"'
699	CALL message( 'check_parameters', 'PA0020', 1, 2, 0, 6, 0 )
700	ENDIF
701	ENDIF
702
703	IF ( fft_method /= 'singleton-algorithm' .AND. &
704	fft_method /= 'temperton-algorithm' .AND. &
705	fft_method /= 'system-specific' ) THEN
706	message_string = 'unknown fft-algorithm: fft_method = "' // &
707	TRIM( fft_method ) // '"'
708	CALL message( 'check_parameters', 'PA0021', 1, 2, 0, 6, 0 )
709	ENDIF
710
711	IF( momentum_advec == 'ws-scheme' .AND. &
712	.NOT. call_psolver_at_all_substeps ) THEN
713	message_string = 'psolver must be called at each RK3 substep when "'//&
714	TRIM(momentum_advec) // ' "is used for momentum_advec'
715	CALL message( 'check_parameters', 'PA0344', 1, 2, 0, 6, 0 )
716	END IF
717	!
718	!-- Advection schemes:
719	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme' ) &
720	THEN
721	message_string = 'unknown advection scheme: momentum_advec = "' // &
722	TRIM( momentum_advec ) // '"'
723	CALL message( 'check_parameters', 'PA0022', 1, 2, 0, 6, 0 )
724	ENDIF
725	IF ( ( momentum_advec == 'ws-scheme' .OR. scalar_advec == 'ws-scheme' ) &
726	.AND. ( timestep_scheme == 'euler' .OR. &
727	timestep_scheme == 'runge-kutta-2' ) ) &
728	THEN
729	message_string = 'momentum_advec or scalar_advec = "' &
730	// TRIM( momentum_advec ) // '" is not allowed with timestep_scheme = "' // &
731	TRIM( timestep_scheme ) // '"'
732	CALL message( 'check_parameters', 'PA0023', 1, 2, 0, 6, 0 )
733	ENDIF
734	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'ws-scheme' .AND. &
735	scalar_advec /= 'bc-scheme' ) &
736	THEN
737	message_string = 'unknown advection scheme: scalar_advec = "' // &
738	TRIM( scalar_advec ) // '"'
739	CALL message( 'check_parameters', 'PA0024', 1, 2, 0, 6, 0 )
740	ENDIF
741	IF ( scalar_advec == 'bc-scheme' .AND. loop_optimization == 'cache' ) &
742	THEN
743	message_string = 'advection_scheme scalar_advec = "' &
744	// TRIM( scalar_advec ) // '" not implemented for & loop_optimization = "' // &
745	TRIM( loop_optimization ) // '"'
746	CALL message( 'check_parameters', 'PA0026', 1, 2, 0, 6, 0 )
747	ENDIF
748
749	IF ( use_sgs_for_particles .AND. .NOT. use_upstream_for_tke ) THEN
750	use_upstream_for_tke = .TRUE.
751	message_string = 'use_upstream_for_tke set .TRUE. because ' // &
752	'use_sgs_for_particles = .TRUE.'
753	CALL message( 'check_parameters', 'PA0025', 0, 1, 0, 6, 0 )
754	ENDIF
755
756	IF ( use_sgs_for_particles .AND. curvature_solution_effects ) THEN
757	message_string = 'use_sgs_for_particles = .TRUE. not allowed with ' // &
758	'curvature_solution_effects = .TRUE.'
759	CALL message( 'check_parameters', 'PA0349', 1, 2, 0, 6, 0 )
760	ENDIF
761
762	!
763	!-- Set LOGICAL switches to enhance performance
764	IF ( momentum_advec == 'ws-scheme' ) ws_scheme_mom = .TRUE.
765	IF ( scalar_advec == 'ws-scheme' ) ws_scheme_sca = .TRUE.
766
767	!
768	!-- Timestep schemes:
769	SELECT CASE ( TRIM( timestep_scheme ) )
770
771	CASE ( 'euler' )
772	intermediate_timestep_count_max = 1
773
774	CASE ( 'runge-kutta-2' )
775	intermediate_timestep_count_max = 2
776
777	CASE ( 'runge-kutta-3' )
778	intermediate_timestep_count_max = 3
779
780	CASE DEFAULT
781	message_string = 'unknown timestep scheme: timestep_scheme = "' // &
782	TRIM( timestep_scheme ) // '"'
783	CALL message( 'check_parameters', 'PA0027', 1, 2, 0, 6, 0 )
784
785	END SELECT
786
787	IF ( (momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme') &
788	.AND. timestep_scheme(1:5) == 'runge' ) THEN
789	message_string = 'momentum advection scheme "' // &
790	TRIM( momentum_advec ) // '" & does not work with ' // &
791	'timestep_scheme "' // TRIM( timestep_scheme ) // '"'
792	CALL message( 'check_parameters', 'PA0029', 1, 2, 0, 6, 0 )
793	ENDIF
794
795	!
796	!-- Collision kernels:
797	SELECT CASE ( TRIM( collision_kernel ) )
798
799	CASE ( 'hall', 'hall_fast' )
800	hall_kernel = .TRUE.
801
802	CASE ( 'palm' )
803	palm_kernel = .TRUE.
804
805	CASE ( 'wang', 'wang_fast' )
806	wang_kernel = .TRUE.
807
808	CASE ( 'none' )
809
810
811	CASE DEFAULT
812	message_string = 'unknown collision kernel: collision_kernel = "' // &
813	TRIM( collision_kernel ) // '"'
814	CALL message( 'check_parameters', 'PA0350', 1, 2, 0, 6, 0 )
815
816	END SELECT
817	IF ( collision_kernel(6:9) == 'fast' ) use_kernel_tables = .TRUE.
818
819	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
820	TRIM( initializing_actions ) /= 'cyclic_fill' ) THEN
821	!
822	!-- No restart run: several initialising actions are possible
823	action = initializing_actions
824	DO WHILE ( TRIM( action ) /= '' )
825	position = INDEX( action, ' ' )
826	SELECT CASE ( action(1:position-1) )
827
828	CASE ( 'set_constant_profiles', 'set_1d-model_profiles', &
829	'by_user', 'initialize_vortex', 'initialize_ptanom' )
830	action = action(position+1:)
831
832	CASE DEFAULT
833	message_string = 'initializing_action = "' // &
834	TRIM( action ) // '" unkown or not allowed'
835	CALL message( 'check_parameters', 'PA0030', 1, 2, 0, 6, 0 )
836
837	END SELECT
838	ENDDO
839	ENDIF
840
841	IF ( TRIM( initializing_actions ) == 'initialize_vortex' .AND. &
842	conserve_volume_flow ) THEN
843	message_string = 'initializing_actions = "initialize_vortex"' // &
844	' ist not allowed with conserve_volume_flow = .T.'
845	CALL message( 'check_parameters', 'PA0343', 1, 2, 0, 6, 0 )
846	ENDIF
847
848
849	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
850	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
851	message_string = 'initializing_actions = "set_constant_profiles"' // &
852	' and "set_1d-model_profiles" are not allowed ' // &
853	'simultaneously'
854	CALL message( 'check_parameters', 'PA0031', 1, 2, 0, 6, 0 )
855	ENDIF
856
857	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
858	INDEX( initializing_actions, 'by_user' ) /= 0 ) THEN
859	message_string = 'initializing_actions = "set_constant_profiles"' // &
860	' and "by_user" are not allowed simultaneously'
861	CALL message( 'check_parameters', 'PA0032', 1, 2, 0, 6, 0 )
862	ENDIF
863
864	IF ( INDEX( initializing_actions, 'by_user' ) /= 0 .AND. &
865	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
866	message_string = 'initializing_actions = "by_user" and ' // &
867	'"set_1d-model_profiles" are not allowed simultaneously'
868	CALL message( 'check_parameters', 'PA0033', 1, 2, 0, 6, 0 )
869	ENDIF
870
871	IF ( cloud_physics .AND. .NOT. humidity ) THEN
872	WRITE( message_string, * ) 'cloud_physics = ', cloud_physics, ' is ', &
873	'not allowed with humidity = ', humidity
874	CALL message( 'check_parameters', 'PA0034', 1, 2, 0, 6, 0 )
875	ENDIF
876
877	IF ( precipitation .AND. .NOT. cloud_physics ) THEN
878	WRITE( message_string, * ) 'precipitation = ', precipitation, ' is ', &
879	'not allowed with cloud_physics = ', cloud_physics
880	CALL message( 'check_parameters', 'PA0035', 1, 2, 0, 6, 0 )
881	ENDIF
882
883	IF ( humidity .AND. sloping_surface ) THEN
884	message_string = 'humidity = .TRUE. and sloping_surface = .TRUE. ' // &
885	'are not allowed simultaneously'
886	CALL message( 'check_parameters', 'PA0036', 1, 2, 0, 6, 0 )
887	ENDIF
888
889	IF ( passive_scalar .AND. humidity ) THEN
890	message_string = 'humidity = .TRUE. and passive_scalar = .TRUE. ' // &
891	'is not allowed simultaneously'
892	CALL message( 'check_parameters', 'PA0038', 1, 2, 0, 6, 0 )
893	ENDIF
894
895	IF ( plant_canopy .AND. ( drag_coefficient == 0.0 ) ) THEN
896	message_string = 'plant_canopy = .TRUE. requires a non-zero drag ' // &
897	'coefficient & given value is drag_coefficient = 0.0'
898	CALL message( 'check_parameters', 'PA0041', 1, 2, 0, 6, 0 )
899	ENDIF
900
901	IF ( plant_canopy .AND. cloud_physics .AND. icloud_scheme == 0 ) THEN
902	message_string = 'plant_canopy = .TRUE. requires cloud_scheme /=' // &
903	' seifert_beheng'
904	CALL message( 'check_parameters', 'PA0360', 1, 2, 0, 6, 0 )
905	ENDIF
906
907	IF ( loop_optimization /= 'cache' .AND. cloud_physics .AND. &
908	icloud_scheme == 0 ) THEN
909	message_string = 'cloud_scheme = seifert_beheng requires ' // &
910	'loop_optimization = cache'
911	CALL message( 'check_parameters', 'PA0362', 1, 2, 0, 6, 0 )
912	ENDIF
913
914	! IF ( cloud_physics .AND. icloud_scheme == 0 .AND. &
915	! .NOT. precipitation .AND. .NOT. drizzle ) THEN
916	! message_string = 'cloud_scheme = seifert_beheng requires ' // &
917	! 'precipitation = .TRUE. or drizzle = .TRUE.'
918	! CALL message( 'check_parameters', 'PA0363', 1, 2, 0, 6, 0 )
919	! ENDIF
920
921	!
922	!-- In case of no model continuation run, check initialising parameters and
923	!-- deduce further quantities
924	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
925
926	!
927	!-- Initial profiles for 1D and 3D model, respectively (u,v further below)
928	pt_init = pt_surface
929	IF ( humidity ) THEN
930	q_init = q_surface
931	ENDIF
932	IF ( ocean ) sa_init = sa_surface
933	IF ( passive_scalar ) q_init = s_surface
934	IF ( plant_canopy ) lad = 0.0
935
936	!
937	!--
938	!-- If required, compute initial profile of the geostrophic wind
939	!-- (component ug)
940	i = 1
941	gradient = 0.0
942
943	IF ( .NOT. ocean ) THEN
944
945	ug_vertical_gradient_level_ind(1) = 0
946	ug(0) = ug_surface
947	DO k = 1, nzt+1
948	IF ( i < 11 ) THEN
949	IF ( ug_vertical_gradient_level(i) < zu(k) .AND. &
950	ug_vertical_gradient_level(i) >= 0.0 ) THEN
951	gradient = ug_vertical_gradient(i) / 100.0
952	ug_vertical_gradient_level_ind(i) = k - 1
953	i = i + 1
954	ENDIF
955	ENDIF
956	IF ( gradient /= 0.0 ) THEN
957	IF ( k /= 1 ) THEN
958	ug(k) = ug(k-1) + dzu(k) * gradient
959	ELSE
960	ug(k) = ug_surface + dzu(k) * gradient
961	ENDIF
962	ELSE
963	ug(k) = ug(k-1)
964	ENDIF
965	ENDDO
966
967	ELSE
968
969	ug_vertical_gradient_level_ind(1) = nzt+1
970	ug(nzt+1) = ug_surface
971	DO k = nzt, nzb, -1
972	IF ( i < 11 ) THEN
973	IF ( ug_vertical_gradient_level(i) > zu(k) .AND. &
974	ug_vertical_gradient_level(i) <= 0.0 ) THEN
975	gradient = ug_vertical_gradient(i) / 100.0
976	ug_vertical_gradient_level_ind(i) = k + 1
977	i = i + 1
978	ENDIF
979	ENDIF
980	IF ( gradient /= 0.0 ) THEN
981	IF ( k /= nzt ) THEN
982	ug(k) = ug(k+1) - dzu(k+1) * gradient
983	ELSE
984	ug(k) = ug_surface - 0.5 * dzu(k+1) * gradient
985	ug(k+1) = ug_surface + 0.5 * dzu(k+1) * gradient
986	ENDIF
987	ELSE
988	ug(k) = ug(k+1)
989	ENDIF
990	ENDDO
991
992	ENDIF
993
994	!
995	!-- In case of no given gradients for ug, choose a zero gradient
996	IF ( ug_vertical_gradient_level(1) == -9999999.9 ) THEN
997	ug_vertical_gradient_level(1) = 0.0
998	ENDIF
999
1000	!
1001	!--
1002	!-- If required, compute initial profile of the geostrophic wind
1003	!-- (component vg)
1004	i = 1
1005	gradient = 0.0
1006
1007	IF ( .NOT. ocean ) THEN
1008
1009	vg_vertical_gradient_level_ind(1) = 0
1010	vg(0) = vg_surface
1011	DO k = 1, nzt+1
1012	IF ( i < 11 ) THEN
1013	IF ( vg_vertical_gradient_level(i) < zu(k) .AND. &
1014	vg_vertical_gradient_level(i) >= 0.0 ) THEN
1015	gradient = vg_vertical_gradient(i) / 100.0
1016	vg_vertical_gradient_level_ind(i) = k - 1
1017	i = i + 1
1018	ENDIF
1019	ENDIF
1020	IF ( gradient /= 0.0 ) THEN
1021	IF ( k /= 1 ) THEN
1022	vg(k) = vg(k-1) + dzu(k) * gradient
1023	ELSE
1024	vg(k) = vg_surface + dzu(k) * gradient
1025	ENDIF
1026	ELSE
1027	vg(k) = vg(k-1)
1028	ENDIF
1029	ENDDO
1030
1031	ELSE
1032
1033	vg_vertical_gradient_level_ind(1) = nzt+1
1034	vg(nzt+1) = vg_surface
1035	DO k = nzt, nzb, -1
1036	IF ( i < 11 ) THEN
1037	IF ( vg_vertical_gradient_level(i) > zu(k) .AND. &
1038	vg_vertical_gradient_level(i) <= 0.0 ) THEN
1039	gradient = vg_vertical_gradient(i) / 100.0
1040	vg_vertical_gradient_level_ind(i) = k + 1
1041	i = i + 1
1042	ENDIF
1043	ENDIF
1044	IF ( gradient /= 0.0 ) THEN
1045	IF ( k /= nzt ) THEN
1046	vg(k) = vg(k+1) - dzu(k+1) * gradient
1047	ELSE
1048	vg(k) = vg_surface - 0.5 * dzu(k+1) * gradient
1049	vg(k+1) = vg_surface + 0.5 * dzu(k+1) * gradient
1050	ENDIF
1051	ELSE
1052	vg(k) = vg(k+1)
1053	ENDIF
1054	ENDDO
1055
1056	ENDIF
1057
1058	!
1059	!-- In case of no given gradients for vg, choose a zero gradient
1060	IF ( vg_vertical_gradient_level(1) == -9999999.9 ) THEN
1061	vg_vertical_gradient_level(1) = 0.0
1062	ENDIF
1063
1064	!
1065	!-- Let the initial wind profiles be the calculated ug/vg profiles or
1066	!-- interpolate them from wind profile data (if given)
1067	IF ( u_profile(1) == 9999999.9 .AND. v_profile(1) == 9999999.9 ) THEN
1068
1069	u_init = ug
1070	v_init = vg
1071
1072	ELSEIF ( u_profile(1) == 0.0 .AND. v_profile(1) == 0.0 ) THEN
1073
1074	IF ( uv_heights(1) /= 0.0 ) THEN
1075	message_string = 'uv_heights(1) must be 0.0'
1076	CALL message( 'check_parameters', 'PA0345', 1, 2, 0, 6, 0 )
1077	ENDIF
1078
1079	use_prescribed_profile_data = .TRUE.
1080
1081	kk = 1
1082	u_init(0) = 0.0
1083	v_init(0) = 0.0
1084
1085	DO k = 1, nz+1
1086
1087	IF ( kk < 100 ) THEN
1088	DO WHILE ( uv_heights(kk+1) <= zu(k) )
1089	kk = kk + 1
1090	IF ( kk == 100 ) EXIT
1091	ENDDO
1092	ENDIF
1093
1094	IF ( kk < 100 .AND. uv_heights(kk+1) /= 9999999.9 ) THEN
1095	u_init(k) = u_profile(kk) + ( zu(k) - uv_heights(kk) ) / &
1096	( uv_heights(kk+1) - uv_heights(kk) ) * &
1097	( u_profile(kk+1) - u_profile(kk) )
1098	v_init(k) = v_profile(kk) + ( zu(k) - uv_heights(kk) ) / &
1099	( uv_heights(kk+1) - uv_heights(kk) ) * &
1100	( v_profile(kk+1) - v_profile(kk) )
1101	ELSE
1102	u_init(k) = u_profile(kk)
1103	v_init(k) = v_profile(kk)
1104	ENDIF
1105
1106	ENDDO
1107
1108	ELSE
1109
1110	message_string = 'u_profile(1) and v_profile(1) must be 0.0'
1111	CALL message( 'check_parameters', 'PA0346', 1, 2, 0, 6, 0 )
1112
1113	ENDIF
1114
1115	!
1116	!-- Compute initial temperature profile using the given temperature gradients
1117	IF ( .NOT. neutral ) THEN
1118
1119	i = 1
1120	gradient = 0.0
1121
1122	IF ( .NOT. ocean ) THEN
1123
1124	pt_vertical_gradient_level_ind(1) = 0
1125	DO k = 1, nzt+1
1126	IF ( i < 11 ) THEN
1127	IF ( pt_vertical_gradient_level(i) < zu(k) .AND. &
1128	pt_vertical_gradient_level(i) >= 0.0 ) THEN
1129	gradient = pt_vertical_gradient(i) / 100.0
1130	pt_vertical_gradient_level_ind(i) = k - 1
1131	i = i + 1
1132	ENDIF
1133	ENDIF
1134	IF ( gradient /= 0.0 ) THEN
1135	IF ( k /= 1 ) THEN
1136	pt_init(k) = pt_init(k-1) + dzu(k) * gradient
1137	ELSE
1138	pt_init(k) = pt_surface + dzu(k) * gradient
1139	ENDIF
1140	ELSE
1141	pt_init(k) = pt_init(k-1)
1142	ENDIF
1143	ENDDO
1144
1145	ELSE
1146
1147	pt_vertical_gradient_level_ind(1) = nzt+1
1148	DO k = nzt, 0, -1
1149	IF ( i < 11 ) THEN
1150	IF ( pt_vertical_gradient_level(i) > zu(k) .AND. &
1151	pt_vertical_gradient_level(i) <= 0.0 ) THEN
1152	gradient = pt_vertical_gradient(i) / 100.0
1153	pt_vertical_gradient_level_ind(i) = k + 1
1154	i = i + 1
1155	ENDIF
1156	ENDIF
1157	IF ( gradient /= 0.0 ) THEN
1158	IF ( k /= nzt ) THEN
1159	pt_init(k) = pt_init(k+1) - dzu(k+1) * gradient
1160	ELSE
1161	pt_init(k) = pt_surface - 0.5 * dzu(k+1) * gradient
1162	pt_init(k+1) = pt_surface + 0.5 * dzu(k+1) * gradient
1163	ENDIF
1164	ELSE
1165	pt_init(k) = pt_init(k+1)
1166	ENDIF
1167	ENDDO
1168
1169	ENDIF
1170
1171	ENDIF
1172
1173	!
1174	!-- In case of no given temperature gradients, choose gradient of neutral
1175	!-- stratification
1176	IF ( pt_vertical_gradient_level(1) == -9999999.9 ) THEN
1177	pt_vertical_gradient_level(1) = 0.0
1178	ENDIF
1179
1180	!
1181	!-- Store temperature gradient at the top boundary for possible Neumann
1182	!-- boundary condition
1183	bc_pt_t_val = ( pt_init(nzt+1) - pt_init(nzt) ) / dzu(nzt+1)
1184
1185	!
1186	!-- If required, compute initial humidity or scalar profile using the given
1187	!-- humidity/scalar gradient. In case of scalar transport, initially store
1188	!-- values of the scalar parameters on humidity parameters
1189	IF ( passive_scalar ) THEN
1190	bc_q_b = bc_s_b
1191	bc_q_t = bc_s_t
1192	q_surface = s_surface
1193	q_surface_initial_change = s_surface_initial_change
1194	q_vertical_gradient = s_vertical_gradient
1195	q_vertical_gradient_level = s_vertical_gradient_level
1196	surface_waterflux = surface_scalarflux
1197	wall_humidityflux = wall_scalarflux
1198	ENDIF
1199
1200	IF ( humidity .OR. passive_scalar ) THEN
1201
1202	i = 1
1203	gradient = 0.0
1204	q_vertical_gradient_level_ind(1) = 0
1205	DO k = 1, nzt+1
1206	IF ( i < 11 ) THEN
1207	IF ( q_vertical_gradient_level(i) < zu(k) .AND. &
1208	q_vertical_gradient_level(i) >= 0.0 ) THEN
1209	gradient = q_vertical_gradient(i) / 100.0
1210	q_vertical_gradient_level_ind(i) = k - 1
1211	i = i + 1
1212	ENDIF
1213	ENDIF
1214	IF ( gradient /= 0.0 ) THEN
1215	IF ( k /= 1 ) THEN
1216	q_init(k) = q_init(k-1) + dzu(k) * gradient
1217	ELSE
1218	q_init(k) = q_init(k-1) + dzu(k) * gradient
1219	ENDIF
1220	ELSE
1221	q_init(k) = q_init(k-1)
1222	ENDIF
1223	!
1224	!-- Avoid negative humidities
1225	IF ( q_init(k) < 0.0 ) THEN
1226	q_init(k) = 0.0
1227	ENDIF
1228	ENDDO
1229
1230	!
1231	!-- In case of no given humidity gradients, choose zero gradient
1232	!-- conditions
1233	IF ( q_vertical_gradient_level(1) == -1.0 ) THEN
1234	q_vertical_gradient_level(1) = 0.0
1235	ENDIF
1236	!
1237	!-- Store humidity, rain water content and rain drop concentration
1238	!-- gradient at the top boundary for possile Neumann boundary condition
1239	bc_q_t_val = ( q_init(nzt+1) - q_init(nzt) ) / dzu(nzt+1)
1240	ENDIF
1241
1242	!
1243	!-- If required, compute initial salinity profile using the given salinity
1244	!-- gradients
1245	IF ( ocean ) THEN
1246
1247	i = 1
1248	gradient = 0.0
1249
1250	sa_vertical_gradient_level_ind(1) = nzt+1
1251	DO k = nzt, 0, -1
1252	IF ( i < 11 ) THEN
1253	IF ( sa_vertical_gradient_level(i) > zu(k) .AND. &
1254	sa_vertical_gradient_level(i) <= 0.0 ) THEN
1255	gradient = sa_vertical_gradient(i) / 100.0
1256	sa_vertical_gradient_level_ind(i) = k + 1
1257	i = i + 1
1258	ENDIF
1259	ENDIF
1260	IF ( gradient /= 0.0 ) THEN
1261	IF ( k /= nzt ) THEN
1262	sa_init(k) = sa_init(k+1) - dzu(k+1) * gradient
1263	ELSE
1264	sa_init(k) = sa_surface - 0.5 * dzu(k+1) * gradient
1265	sa_init(k+1) = sa_surface + 0.5 * dzu(k+1) * gradient
1266	ENDIF
1267	ELSE
1268	sa_init(k) = sa_init(k+1)
1269	ENDIF
1270	ENDDO
1271
1272	ENDIF
1273
1274	!
1275	!-- If required compute the profile of leaf area density used in the plant
1276	!-- canopy model
1277	IF ( plant_canopy ) THEN
1278
1279	i = 1
1280	gradient = 0.0
1281
1282	IF ( .NOT. ocean ) THEN
1283
1284	lad(0) = lad_surface
1285
1286	lad_vertical_gradient_level_ind(1) = 0
1287	DO k = 1, pch_index
1288	IF ( i < 11 ) THEN
1289	IF ( lad_vertical_gradient_level(i) < zu(k) .AND. &
1290	lad_vertical_gradient_level(i) >= 0.0 ) THEN
1291	gradient = lad_vertical_gradient(i)
1292	lad_vertical_gradient_level_ind(i) = k - 1
1293	i = i + 1
1294	ENDIF
1295	ENDIF
1296	IF ( gradient /= 0.0 ) THEN
1297	IF ( k /= 1 ) THEN
1298	lad(k) = lad(k-1) + dzu(k) * gradient
1299	ELSE
1300	lad(k) = lad_surface + dzu(k) *gradient
1301	ENDIF
1302	ELSE
1303	lad(k) = lad(k-1)
1304	ENDIF
1305	ENDDO
1306
1307	ENDIF
1308
1309	!
1310	!-- In case of no given leaf area density gradients, choose a vanishing
1311	!-- gradient
1312	IF ( lad_vertical_gradient_level(1) == -9999999.9 ) THEN
1313	lad_vertical_gradient_level(1) = 0.0
1314	ENDIF
1315
1316	ENDIF
1317
1318	ENDIF
1319
1320	!
1321	!-- Initialize large scale subsidence if required
1322	IF ( subs_vertical_gradient_level(1) /= -9999999.9 ) THEN
1323	large_scale_subsidence = .TRUE.
1324	CALL init_w_subsidence
1325	END IF
1326
1327
1328
1329	!
1330	!-- Compute Coriolis parameter
1331	f = 2.0 * omega * SIN( phi / 180.0 * pi )
1332	fs = 2.0 * omega * COS( phi / 180.0 * pi )
1333
1334	!
1335	!-- Ocean runs always use reference values in the buoyancy term. Therefore
1336	!-- set the reference temperature equal to the surface temperature.
1337	IF ( ocean .AND. pt_reference == 9999999.9 ) pt_reference = pt_surface
1338
1339	!
1340	!-- Reference value has to be used in buoyancy terms
1341	IF ( pt_reference /= 9999999.9 ) use_reference = .TRUE.
1342
1343	!
1344	!-- Sign of buoyancy/stability terms
1345	IF ( ocean ) atmos_ocean_sign = -1.0
1346
1347	!
1348	!-- Ocean version must use flux boundary conditions at the top
1349	IF ( ocean .AND. .NOT. use_top_fluxes ) THEN
1350	message_string = 'use_top_fluxes must be .TRUE. in ocean version'
1351	CALL message( 'check_parameters', 'PA0042', 1, 2, 0, 6, 0 )
1352	ENDIF
1353
1354	!
1355	!-- In case of a given slope, compute the relevant quantities
1356	IF ( alpha_surface /= 0.0 ) THEN
1357	IF ( ABS( alpha_surface ) > 90.0 ) THEN
1358	WRITE( message_string, * ) 'ABS( alpha_surface = ', alpha_surface, &
1359	' ) must be < 90.0'
1360	CALL message( 'check_parameters', 'PA0043', 1, 2, 0, 6, 0 )
1361	ENDIF
1362	sloping_surface = .TRUE.
1363	cos_alpha_surface = COS( alpha_surface / 180.0 * pi )
1364	sin_alpha_surface = SIN( alpha_surface / 180.0 * pi )
1365	ENDIF
1366
1367	!
1368	!-- Check time step and cfl_factor
1369	IF ( dt /= -1.0 ) THEN
1370	IF ( dt <= 0.0 .AND. dt /= -1.0 ) THEN
1371	WRITE( message_string, * ) 'dt = ', dt , ' <= 0.0'
1372	CALL message( 'check_parameters', 'PA0044', 1, 2, 0, 6, 0 )
1373	ENDIF
1374	dt_3d = dt
1375	dt_fixed = .TRUE.
1376	ENDIF
1377
1378	IF ( cfl_factor <= 0.0 .OR. cfl_factor > 1.0 ) THEN
1379	IF ( cfl_factor == -1.0 ) THEN
1380	IF ( timestep_scheme == 'runge-kutta-2' ) THEN
1381	cfl_factor = 0.8
1382	ELSEIF ( timestep_scheme == 'runge-kutta-3' ) THEN
1383	cfl_factor = 0.9
1384	ELSE
1385	cfl_factor = 0.9
1386	ENDIF
1387	ELSE
1388	WRITE( message_string, * ) 'cfl_factor = ', cfl_factor, &
1389	' out of range & 0.0 < cfl_factor <= 1.0 is required'
1390	CALL message( 'check_parameters', 'PA0045', 1, 2, 0, 6, 0 )
1391	ENDIF
1392	ENDIF
1393
1394	!
1395	!-- Store simulated time at begin
1396	simulated_time_at_begin = simulated_time
1397
1398	!
1399	!-- Store reference time for coupled runs and change the coupling flag,
1400	!-- if ...
1401	IF ( simulated_time == 0.0 ) THEN
1402	IF ( coupling_start_time == 0.0 ) THEN
1403	time_since_reference_point = 0.0
1404	ELSEIF ( time_since_reference_point < 0.0 ) THEN
1405	run_coupled = .FALSE.
1406	ENDIF
1407	ENDIF
1408
1409	!
1410	!-- Set wind speed in the Galilei-transformed system
1411	IF ( galilei_transformation ) THEN
1412	IF ( use_ug_for_galilei_tr .AND. &
1413	ug_vertical_gradient_level(1) == 0.0 .AND. &
1414	ug_vertical_gradient(1) == 0.0 .AND. &
1415	vg_vertical_gradient_level(1) == 0.0 .AND. &
1416	vg_vertical_gradient(1) == 0.0 ) THEN
1417	u_gtrans = ug_surface * 0.6
1418	v_gtrans = vg_surface * 0.6
1419	ELSEIF ( use_ug_for_galilei_tr .AND. &
1420	( ug_vertical_gradient_level(1) /= 0.0 .OR. &
1421	ug_vertical_gradient(1) /= 0.0 ) ) THEN
1422	message_string = 'baroclinicity (ug) not allowed simultaneously' // &
1423	' with galilei transformation'
1424	CALL message( 'check_parameters', 'PA0046', 1, 2, 0, 6, 0 )
1425	ELSEIF ( use_ug_for_galilei_tr .AND. &
1426	( vg_vertical_gradient_level(1) /= 0.0 .OR. &
1427	vg_vertical_gradient(1) /= 0.0 ) ) THEN
1428	message_string = 'baroclinicity (vg) not allowed simultaneously' // &
1429	' with galilei transformation'
1430	CALL message( 'check_parameters', 'PA0047', 1, 2, 0, 6, 0 )
1431	ELSE
1432	message_string = 'variable translation speed used for galilei-' // &
1433	'transformation, which may cause & instabilities in stably ' // &
1434	'stratified regions'
1435	CALL message( 'check_parameters', 'PA0048', 0, 1, 0, 6, 0 )
1436	ENDIF
1437	ENDIF
1438
1439	!
1440	!-- In case of using a prandtl-layer, calculated (or prescribed) surface
1441	!-- fluxes have to be used in the diffusion-terms
1442	IF ( prandtl_layer ) use_surface_fluxes = .TRUE.
1443
1444	!
1445	!-- Check boundary conditions and set internal variables:
1446	!-- Lateral boundary conditions
1447	IF ( bc_lr /= 'cyclic' .AND. bc_lr /= 'dirichlet/radiation' .AND. &
1448	bc_lr /= 'radiation/dirichlet' ) THEN
1449	message_string = 'unknown boundary condition: bc_lr = "' // &
1450	TRIM( bc_lr ) // '"'
1451	CALL message( 'check_parameters', 'PA0049', 1, 2, 0, 6, 0 )
1452	ENDIF
1453	IF ( bc_ns /= 'cyclic' .AND. bc_ns /= 'dirichlet/radiation' .AND. &
1454	bc_ns /= 'radiation/dirichlet' ) THEN
1455	message_string = 'unknown boundary condition: bc_ns = "' // &
1456	TRIM( bc_ns ) // '"'
1457	CALL message( 'check_parameters', 'PA0050', 1, 2, 0, 6, 0 )
1458	ENDIF
1459
1460	!
1461	!-- Internal variables used for speed optimization in if clauses
1462	IF ( bc_lr /= 'cyclic' ) bc_lr_cyc = .FALSE.
1463	IF ( bc_lr == 'dirichlet/radiation' ) bc_lr_dirrad = .TRUE.
1464	IF ( bc_lr == 'radiation/dirichlet' ) bc_lr_raddir = .TRUE.
1465	IF ( bc_ns /= 'cyclic' ) bc_ns_cyc = .FALSE.
1466	IF ( bc_ns == 'dirichlet/radiation' ) bc_ns_dirrad = .TRUE.
1467	IF ( bc_ns == 'radiation/dirichlet' ) bc_ns_raddir = .TRUE.
1468
1469	!
1470	!-- Non-cyclic lateral boundaries require the multigrid method and Piascek-
1471	!-- Willimas or Wicker - Skamarock advection scheme. Several schemes
1472	!-- and tools do not work with non-cyclic boundary conditions.
1473	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
1474	IF ( psolver /= 'multigrid' ) THEN
1475	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1476	'psolver = "' // TRIM( psolver ) // '"'
1477	CALL message( 'check_parameters', 'PA0051', 1, 2, 0, 6, 0 )
1478	ENDIF
1479	IF ( momentum_advec /= 'pw-scheme' .AND. &
1480	momentum_advec /= 'ws-scheme') THEN
1481	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1482	'momentum_advec = "' // TRIM( momentum_advec ) // '"'
1483	CALL message( 'check_parameters', 'PA0052', 1, 2, 0, 6, 0 )
1484	ENDIF
1485	IF ( scalar_advec /= 'pw-scheme' .AND. &
1486	scalar_advec /= 'ws-scheme' ) THEN
1487	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1488	'scalar_advec = "' // TRIM( scalar_advec ) // '"'
1489	CALL message( 'check_parameters', 'PA0053', 1, 2, 0, 6, 0 )
1490	ENDIF
1491	IF ( galilei_transformation ) THEN
1492	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1493	'galilei_transformation = .T.'
1494	CALL message( 'check_parameters', 'PA0054', 1, 2, 0, 6, 0 )
1495	ENDIF
1496	ENDIF
1497
1498	!
1499	!-- Bottom boundary condition for the turbulent Kinetic energy
1500	IF ( bc_e_b == 'neumann' ) THEN
1501	ibc_e_b = 1
1502	ELSEIF ( bc_e_b == '(u)*2+neumann' ) THEN
1503	ibc_e_b = 2
1504	IF ( prandtl_layer ) THEN
1505	message_string = 'adjust mixing length = FALSE and bc_e_b = "' // &
1506	TRIM( bc_e_b ) // '"'
1507	CALL message( 'check_parameters', 'PA0056', 0, 1, 0, 6, 0 )
1508	ENDIF
1509	IF ( .NOT. prandtl_layer ) THEN
1510	bc_e_b = 'neumann'
1511	ibc_e_b = 1
1512	message_string = 'boundary condition bc_e_b changed to "' // &
1513	TRIM( bc_e_b ) // '"'
1514	CALL message( 'check_parameters', 'PA0057', 0, 1, 0, 6, 0 )
1515	ENDIF
1516	ELSE
1517	message_string = 'unknown boundary condition: bc_e_b = "' // &
1518	TRIM( bc_e_b ) // '"'
1519	CALL message( 'check_parameters', 'PA0058', 1, 2, 0, 6, 0 )
1520	ENDIF
1521
1522	!
1523	!-- Boundary conditions for perturbation pressure
1524	IF ( bc_p_b == 'dirichlet' ) THEN
1525	ibc_p_b = 0
1526	ELSEIF ( bc_p_b == 'neumann' ) THEN
1527	ibc_p_b = 1
1528	ELSE
1529	message_string = 'unknown boundary condition: bc_p_b = "' // &
1530	TRIM( bc_p_b ) // '"'
1531	CALL message( 'check_parameters', 'PA0059', 1, 2, 0, 6, 0 )
1532	ENDIF
1533
1534	IF ( bc_p_t == 'dirichlet' ) THEN
1535	ibc_p_t = 0
1536	ELSEIF ( bc_p_t == 'neumann' ) THEN
1537	ibc_p_t = 1
1538	ELSE
1539	message_string = 'unknown boundary condition: bc_p_t = "' // &
1540	TRIM( bc_p_t ) // '"'
1541	CALL message( 'check_parameters', 'PA0061', 1, 2, 0, 6, 0 )
1542	ENDIF
1543
1544	!
1545	!-- Boundary conditions for potential temperature
1546	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
1547	ibc_pt_b = 2
1548	ELSE
1549	IF ( bc_pt_b == 'dirichlet' ) THEN
1550	ibc_pt_b = 0
1551	ELSEIF ( bc_pt_b == 'neumann' ) THEN
1552	ibc_pt_b = 1
1553	ELSE
1554	message_string = 'unknown boundary condition: bc_pt_b = "' // &
1555	TRIM( bc_pt_b ) // '"'
1556	CALL message( 'check_parameters', 'PA0062', 1, 2, 0, 6, 0 )
1557	ENDIF
1558	ENDIF
1559
1560	IF ( bc_pt_t == 'dirichlet' ) THEN
1561	ibc_pt_t = 0
1562	ELSEIF ( bc_pt_t == 'neumann' ) THEN
1563	ibc_pt_t = 1
1564	ELSEIF ( bc_pt_t == 'initial_gradient' ) THEN
1565	ibc_pt_t = 2
1566	ELSE
1567	message_string = 'unknown boundary condition: bc_pt_t = "' // &
1568	TRIM( bc_pt_t ) // '"'
1569	CALL message( 'check_parameters', 'PA0063', 1, 2, 0, 6, 0 )
1570	ENDIF
1571
1572	IF ( surface_heatflux == 9999999.9 ) constant_heatflux = .FALSE.
1573	IF ( top_heatflux == 9999999.9 ) constant_top_heatflux = .FALSE.
1574
1575	IF ( neutral ) THEN
1576
1577	IF ( surface_heatflux /= 0.0 .AND. surface_heatflux /= 9999999.9 ) &
1578	THEN
1579	message_string = 'heatflux must not be set for pure neutral flow'
1580	CALL message( 'check_parameters', 'PA0351', 1, 2, 0, 6, 0 )
1581	ENDIF
1582
1583	IF ( top_heatflux /= 0.0 .AND. top_heatflux /= 9999999.9 ) &
1584	THEN
1585	message_string = 'heatflux must not be set for pure neutral flow'
1586	CALL message( 'check_parameters', 'PA0351', 1, 2, 0, 6, 0 )
1587	ENDIF
1588
1589	ENDIF
1590
1591	IF ( top_momentumflux_u /= 9999999.9 .AND. &
1592	top_momentumflux_v /= 9999999.9 ) THEN
1593	constant_top_momentumflux = .TRUE.
1594	ELSEIF ( .NOT. ( top_momentumflux_u == 9999999.9 .AND. &
1595	top_momentumflux_v == 9999999.9 ) ) THEN
1596	message_string = 'both, top_momentumflux_u AND top_momentumflux_v ' // &
1597	'must be set'
1598	CALL message( 'check_parameters', 'PA0064', 1, 2, 0, 6, 0 )
1599	ENDIF
1600
1601	!
1602	!-- A given surface temperature implies Dirichlet boundary condition for
1603	!-- temperature. In this case specification of a constant heat flux is
1604	!-- forbidden.
1605	IF ( ibc_pt_b == 0 .AND. constant_heatflux .AND. &
1606	surface_heatflux /= 0.0 ) THEN
1607	message_string = 'boundary_condition: bc_pt_b = "' // TRIM( bc_pt_b ) //&
1608	'& is not allowed with constant_heatflux = .TRUE.'
1609	CALL message( 'check_parameters', 'PA0065', 1, 2, 0, 6, 0 )
1610	ENDIF
1611	IF ( constant_heatflux .AND. pt_surface_initial_change /= 0.0 ) THEN
1612	WRITE ( message_string, * ) 'constant_heatflux = .TRUE. is not allo', &
1613	'wed with pt_surface_initial_change (/=0) = ', &
1614	pt_surface_initial_change
1615	CALL message( 'check_parameters', 'PA0066', 1, 2, 0, 6, 0 )
1616	ENDIF
1617
1618	!
1619	!-- A given temperature at the top implies Dirichlet boundary condition for
1620	!-- temperature. In this case specification of a constant heat flux is
1621	!-- forbidden.
1622	IF ( ibc_pt_t == 0 .AND. constant_top_heatflux .AND. &
1623	top_heatflux /= 0.0 ) THEN
1624	message_string = 'boundary_condition: bc_pt_t = "' // TRIM( bc_pt_t ) //&
1625	'" is not allowed with constant_top_heatflux = .TRUE.'
1626	CALL message( 'check_parameters', 'PA0067', 1, 2, 0, 6, 0 )
1627	ENDIF
1628
1629	!
1630	!-- Boundary conditions for salinity
1631	IF ( ocean ) THEN
1632	IF ( bc_sa_t == 'dirichlet' ) THEN
1633	ibc_sa_t = 0
1634	ELSEIF ( bc_sa_t == 'neumann' ) THEN
1635	ibc_sa_t = 1
1636	ELSE
1637	message_string = 'unknown boundary condition: bc_sa_t = "' // &
1638	TRIM( bc_sa_t ) // '"'
1639	CALL message( 'check_parameters', 'PA0068', 1, 2, 0, 6, 0 )
1640	ENDIF
1641
1642	IF ( top_salinityflux == 9999999.9 ) constant_top_salinityflux = .FALSE.
1643	IF ( ibc_sa_t == 1 .AND. top_salinityflux == 9999999.9 ) THEN
1644	message_string = 'boundary condition: bc_sa_t = "' // &
1645	TRIM( bc_sa_t ) // '" requires to set ' // &
1646	'top_salinityflux'
1647	CALL message( 'check_parameters', 'PA0069', 1, 2, 0, 6, 0 )
1648	ENDIF
1649
1650	!
1651	!-- A fixed salinity at the top implies Dirichlet boundary condition for
1652	!-- salinity. In this case specification of a constant salinity flux is
1653	!-- forbidden.
1654	IF ( ibc_sa_t == 0 .AND. constant_top_salinityflux .AND. &
1655	top_salinityflux /= 0.0 ) THEN
1656	message_string = 'boundary condition: bc_sa_t = "' // &
1657	TRIM( bc_sa_t ) // '" is not allowed with ' // &
1658	'constant_top_salinityflux = .TRUE.'
1659	CALL message( 'check_parameters', 'PA0070', 1, 2, 0, 6, 0 )
1660	ENDIF
1661
1662	ENDIF
1663
1664	!
1665	!-- In case of humidity or passive scalar, set boundary conditions for total
1666	!-- water content / scalar
1667	IF ( humidity .OR. passive_scalar ) THEN
1668	IF ( humidity ) THEN
1669	sq = 'q'
1670	ELSE
1671	sq = 's'
1672	ENDIF
1673	IF ( bc_q_b == 'dirichlet' ) THEN
1674	ibc_q_b = 0
1675	ELSEIF ( bc_q_b == 'neumann' ) THEN
1676	ibc_q_b = 1
1677	ELSE
1678	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
1679	'_b ="' // TRIM( bc_q_b ) // '"'
1680	CALL message( 'check_parameters', 'PA0071', 1, 2, 0, 6, 0 )
1681	ENDIF
1682	IF ( bc_q_t == 'dirichlet' ) THEN
1683	ibc_q_t = 0
1684	ELSEIF ( bc_q_t == 'neumann' ) THEN
1685	ibc_q_t = 1
1686	ELSE
1687	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
1688	'_t ="' // TRIM( bc_q_t ) // '"'
1689	CALL message( 'check_parameters', 'PA0072', 1, 2, 0, 6, 0 )
1690	ENDIF
1691
1692	IF ( surface_waterflux == 9999999.9 ) constant_waterflux = .FALSE.
1693
1694	!
1695	!-- A given surface humidity implies Dirichlet boundary condition for
1696	!-- humidity. In this case specification of a constant water flux is
1697	!-- forbidden.
1698	IF ( ibc_q_b == 0 .AND. constant_waterflux ) THEN
1699	message_string = 'boundary condition: bc_' // TRIM( sq ) // '_b ' // &
1700	'= "' // TRIM( bc_q_b ) // '" is not allowed wi' // &
1701	'th prescribed surface flux'
1702	CALL message( 'check_parameters', 'PA0073', 1, 2, 0, 6, 0 )
1703	ENDIF
1704	IF ( constant_waterflux .AND. q_surface_initial_change /= 0.0 ) THEN
1705	WRITE( message_string, * ) 'a prescribed surface flux is not allo', &
1706	'wed with ', sq, '_surface_initial_change (/=0) = ', &
1707	q_surface_initial_change
1708	CALL message( 'check_parameters', 'PA0074', 1, 2, 0, 6, 0 )
1709	ENDIF
1710
1711	ENDIF
1712	!
1713	!-- Boundary conditions for horizontal components of wind speed
1714	IF ( bc_uv_b == 'dirichlet' ) THEN
1715	ibc_uv_b = 0
1716	ELSEIF ( bc_uv_b == 'neumann' ) THEN
1717	ibc_uv_b = 1
1718	IF ( prandtl_layer ) THEN
1719	message_string = 'boundary condition: bc_uv_b = "' // &
1720	TRIM( bc_uv_b ) // '" is not allowed with prandtl_layer = .TRUE.'
1721	CALL message( 'check_parameters', 'PA0075', 1, 2, 0, 6, 0 )
1722	ENDIF
1723	ELSE
1724	message_string = 'unknown boundary condition: bc_uv_b = "' // &
1725	TRIM( bc_uv_b ) // '"'
1726	CALL message( 'check_parameters', 'PA0076', 1, 2, 0, 6, 0 )
1727	ENDIF
1728	!
1729	!-- In case of coupled simulations u and v at the ground in atmosphere will be
1730	!-- assigned with the u and v values of the ocean surface
1731	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
1732	ibc_uv_b = 2
1733	ENDIF
1734
1735	IF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
1736	bc_uv_t = 'neumann'
1737	ibc_uv_t = 1
1738	ELSE
1739	IF ( bc_uv_t == 'dirichlet' .OR. bc_uv_t == 'dirichlet_0' ) THEN
1740	ibc_uv_t = 0
1741	IF ( bc_uv_t == 'dirichlet_0' ) THEN
1742	!
1743	!-- Velocities for the initial u,v-profiles are set zero at the top
1744	!-- in case of dirichlet_0 conditions
1745	u_init(nzt+1) = 0.0
1746	v_init(nzt+1) = 0.0
1747	ENDIF
1748	ELSEIF ( bc_uv_t == 'neumann' ) THEN
1749	ibc_uv_t = 1
1750	ELSE
1751	message_string = 'unknown boundary condition: bc_uv_t = "' // &
1752	TRIM( bc_uv_t ) // '"'
1753	CALL message( 'check_parameters', 'PA0077', 1, 2, 0, 6, 0 )
1754	ENDIF
1755	ENDIF
1756
1757	!
1758	!-- Compute and check, respectively, the Rayleigh Damping parameter
1759	IF ( rayleigh_damping_factor == -1.0 ) THEN
1760	rayleigh_damping_factor = 0.0
1761	ELSE
1762	IF ( rayleigh_damping_factor < 0.0 .OR. rayleigh_damping_factor > 1.0 ) &
1763	THEN
1764	WRITE( message_string, * ) 'rayleigh_damping_factor = ', &
1765	rayleigh_damping_factor, ' out of range [0.0,1.0]'
1766	CALL message( 'check_parameters', 'PA0078', 1, 2, 0, 6, 0 )
1767	ENDIF
1768	ENDIF
1769
1770	IF ( rayleigh_damping_height == -1.0 ) THEN
1771	IF ( .NOT. ocean ) THEN
1772	rayleigh_damping_height = 0.66666666666 * zu(nzt)
1773	ELSE
1774	rayleigh_damping_height = 0.66666666666 * zu(nzb)
1775	ENDIF
1776	ELSE
1777	IF ( .NOT. ocean ) THEN
1778	IF ( rayleigh_damping_height < 0.0 .OR. &
1779	rayleigh_damping_height > zu(nzt) ) THEN
1780	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
1781	rayleigh_damping_height, ' out of range [0.0,', zu(nzt), ']'
1782	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
1783	ENDIF
1784	ELSE
1785	IF ( rayleigh_damping_height > 0.0 .OR. &
1786	rayleigh_damping_height < zu(nzb) ) THEN
1787	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
1788	rayleigh_damping_height, ' out of range [0.0,', zu(nzb), ']'
1789	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
1790	ENDIF
1791	ENDIF
1792	ENDIF
1793
1794	!
1795	!-- Check number of chosen statistic regions. More than 10 regions are not
1796	!-- allowed, because so far no more than 10 corresponding output files can
1797	!-- be opened (cf. check_open)
1798	IF ( statistic_regions > 9 .OR. statistic_regions < 0 ) THEN
1799	WRITE ( message_string, * ) 'number of statistic_regions = ', &
1800	statistic_regions+1, ' but only 10 regions are allowed'
1801	CALL message( 'check_parameters', 'PA0082', 1, 2, 0, 6, 0 )
1802	ENDIF
1803	IF ( normalizing_region > statistic_regions .OR. &
1804	normalizing_region < 0) THEN
1805	WRITE ( message_string, * ) 'normalizing_region = ', &
1806	normalizing_region, ' must be >= 0 and <= ',statistic_regions, &
1807	' (value of statistic_regions)'
1808	CALL message( 'check_parameters', 'PA0083', 1, 2, 0, 6, 0 )
1809	ENDIF
1810
1811	!
1812	!-- Check the interval for sorting particles.
1813	!-- Using particles as cloud droplets requires sorting after each timestep.
1814	IF ( dt_sort_particles /= 0.0 .AND. cloud_droplets ) THEN
1815	dt_sort_particles = 0.0
1816	message_string = 'dt_sort_particles is reset to 0.0 because of cloud' //&
1817	'_droplets = .TRUE.'
1818	CALL message( 'check_parameters', 'PA0084', 0, 1, 0, 6, 0 )
1819	ENDIF
1820
1821	!
1822	!-- Set the default intervals for data output, if necessary
1823	!-- NOTE: dt_dosp has already been set in package_parin
1824	IF ( dt_data_output /= 9999999.9 ) THEN
1825	IF ( dt_dopr == 9999999.9 ) dt_dopr = dt_data_output
1826	IF ( dt_dopts == 9999999.9 ) dt_dopts = dt_data_output
1827	IF ( dt_do2d_xy == 9999999.9 ) dt_do2d_xy = dt_data_output
1828	IF ( dt_do2d_xz == 9999999.9 ) dt_do2d_xz = dt_data_output
1829	IF ( dt_do2d_yz == 9999999.9 ) dt_do2d_yz = dt_data_output
1830	IF ( dt_do3d == 9999999.9 ) dt_do3d = dt_data_output
1831	IF ( dt_data_output_av == 9999999.9 ) dt_data_output_av = dt_data_output
1832	DO mid = 1, max_masks
1833	IF ( dt_domask(mid) == 9999999.9 ) dt_domask(mid) = dt_data_output
1834	ENDDO
1835	ENDIF
1836
1837	!
1838	!-- Set the default skip time intervals for data output, if necessary
1839	IF ( skip_time_dopr == 9999999.9 ) &
1840	skip_time_dopr = skip_time_data_output
1841	IF ( skip_time_dosp == 9999999.9 ) &
1842	skip_time_dosp = skip_time_data_output
1843	IF ( skip_time_do2d_xy == 9999999.9 ) &
1844	skip_time_do2d_xy = skip_time_data_output
1845	IF ( skip_time_do2d_xz == 9999999.9 ) &
1846	skip_time_do2d_xz = skip_time_data_output
1847	IF ( skip_time_do2d_yz == 9999999.9 ) &
1848	skip_time_do2d_yz = skip_time_data_output
1849	IF ( skip_time_do3d == 9999999.9 ) &
1850	skip_time_do3d = skip_time_data_output
1851	IF ( skip_time_data_output_av == 9999999.9 ) &
1852	skip_time_data_output_av = skip_time_data_output
1853	DO mid = 1, max_masks
1854	IF ( skip_time_domask(mid) == 9999999.9 ) &
1855	skip_time_domask(mid) = skip_time_data_output
1856	ENDDO
1857
1858	!
1859	!-- Check the average intervals (first for 3d-data, then for profiles and
1860	!-- spectra)
1861	IF ( averaging_interval > dt_data_output_av ) THEN
1862	WRITE( message_string, * ) 'averaging_interval = ', &
1863	averaging_interval, ' must be <= dt_data_output = ', dt_data_output
1864	CALL message( 'check_parameters', 'PA0085', 1, 2, 0, 6, 0 )
1865	ENDIF
1866
1867	IF ( averaging_interval_pr == 9999999.9 ) THEN
1868	averaging_interval_pr = averaging_interval
1869	ENDIF
1870
1871	IF ( averaging_interval_pr > dt_dopr ) THEN
1872	WRITE( message_string, * ) 'averaging_interval_pr = ', &
1873	averaging_interval_pr, ' must be <= dt_dopr = ', dt_dopr
1874	CALL message( 'check_parameters', 'PA0086', 1, 2, 0, 6, 0 )
1875	ENDIF
1876
1877	IF ( averaging_interval_sp == 9999999.9 ) THEN
1878	averaging_interval_sp = averaging_interval
1879	ENDIF
1880
1881	IF ( averaging_interval_sp > dt_dosp ) THEN
1882	WRITE( message_string, * ) 'averaging_interval_sp = ', &
1883	averaging_interval_sp, ' must be <= dt_dosp = ', dt_dosp
1884	CALL message( 'check_parameters', 'PA0087', 1, 2, 0, 6, 0 )
1885	ENDIF
1886
1887	!
1888	!-- Set the default interval for profiles entering the temporal average
1889	IF ( dt_averaging_input_pr == 9999999.9 ) THEN
1890	dt_averaging_input_pr = dt_averaging_input
1891	ENDIF
1892
1893	!
1894	!-- Set the default interval for the output of timeseries to a reasonable
1895	!-- value (tries to minimize the number of calls of flow_statistics)
1896	IF ( dt_dots == 9999999.9 ) THEN
1897	IF ( averaging_interval_pr == 0.0 ) THEN
1898	dt_dots = MIN( dt_run_control, dt_dopr )
1899	ELSE
1900	dt_dots = MIN( dt_run_control, dt_averaging_input_pr )
1901	ENDIF
1902	ENDIF
1903
1904	!
1905	!-- Check the sample rate for averaging (first for 3d-data, then for profiles)
1906	IF ( dt_averaging_input > averaging_interval ) THEN
1907	WRITE( message_string, * ) 'dt_averaging_input = ', &
1908	dt_averaging_input, ' must be <= averaging_interval = ', &
1909	averaging_interval
1910	CALL message( 'check_parameters', 'PA0088', 1, 2, 0, 6, 0 )
1911	ENDIF
1912
1913	IF ( dt_averaging_input_pr > averaging_interval_pr ) THEN
1914	WRITE( message_string, * ) 'dt_averaging_input_pr = ', &
1915	dt_averaging_input_pr, ' must be <= averaging_interval_pr = ', &
1916	averaging_interval_pr
1917	CALL message( 'check_parameters', 'PA0089', 1, 2, 0, 6, 0 )
1918	ENDIF
1919
1920	!
1921	!-- Set the default value for the integration interval of precipitation amount
1922	IF ( precipitation ) THEN
1923	IF ( precipitation_amount_interval == 9999999.9 ) THEN
1924	precipitation_amount_interval = dt_do2d_xy
1925	ELSE
1926	IF ( precipitation_amount_interval > dt_do2d_xy ) THEN
1927	WRITE( message_string, * ) 'precipitation_amount_interval = ', &
1928	precipitation_amount_interval, ' must not be larger than ', &
1929	'dt_do2d_xy = ', dt_do2d_xy
1930	CALL message( 'check_parameters', 'PA0090', 1, 2, 0, 6, 0 )
1931	ENDIF
1932	ENDIF
1933	ENDIF
1934
1935	!
1936	!-- Determine the number of output profiles and check whether they are
1937	!-- permissible
1938	DO WHILE ( data_output_pr(dopr_n+1) /= ' ' )
1939
1940	dopr_n = dopr_n + 1
1941	i = dopr_n
1942
1943	!
1944	!-- Determine internal profile number (for hom, homs)
1945	!-- and store height levels
1946	SELECT CASE ( TRIM( data_output_pr(i) ) )
1947
1948	CASE ( 'u', '#u' )
1949	dopr_index(i) = 1
1950	dopr_unit(i) = 'm/s'
1951	hom(:,2,1,:) = SPREAD( zu, 2, statistic_regions+1 )
1952	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1953	dopr_initial_index(i) = 5
1954	hom(:,2,5,:) = SPREAD( zu, 2, statistic_regions+1 )
1955	data_output_pr(i) = data_output_pr(i)(2:)
1956	ENDIF
1957
1958	CASE ( 'v', '#v' )
1959	dopr_index(i) = 2
1960	dopr_unit(i) = 'm/s'
1961	hom(:,2,2,:) = SPREAD( zu, 2, statistic_regions+1 )
1962	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1963	dopr_initial_index(i) = 6
1964	hom(:,2,6,:) = SPREAD( zu, 2, statistic_regions+1 )
1965	data_output_pr(i) = data_output_pr(i)(2:)
1966	ENDIF
1967
1968	CASE ( 'w' )
1969	dopr_index(i) = 3
1970	dopr_unit(i) = 'm/s'
1971	hom(:,2,3,:) = SPREAD( zw, 2, statistic_regions+1 )
1972
1973	CASE ( 'pt', '#pt' )
1974	IF ( .NOT. cloud_physics ) THEN
1975	dopr_index(i) = 4
1976	dopr_unit(i) = 'K'
1977	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
1978	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1979	dopr_initial_index(i) = 7
1980	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
1981	hom(nzb,2,7,:) = 0.0 ! because zu(nzb) is negative
1982	data_output_pr(i) = data_output_pr(i)(2:)
1983	ENDIF
1984	ELSE
1985	dopr_index(i) = 43
1986	dopr_unit(i) = 'K'
1987	hom(:,2,43,:) = SPREAD( zu, 2, statistic_regions+1 )
1988	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1989	dopr_initial_index(i) = 28
1990	hom(:,2,28,:) = SPREAD( zu, 2, statistic_regions+1 )
1991	hom(nzb,2,28,:) = 0.0 ! because zu(nzb) is negative
1992	data_output_pr(i) = data_output_pr(i)(2:)
1993	ENDIF
1994	ENDIF
1995
1996	CASE ( 'e' )
1997	dopr_index(i) = 8
1998	dopr_unit(i) = 'm2/s2'
1999	hom(:,2,8,:) = SPREAD( zu, 2, statistic_regions+1 )
2000	hom(nzb,2,8,:) = 0.0
2001
2002	CASE ( 'km', '#km' )
2003	dopr_index(i) = 9
2004	dopr_unit(i) = 'm2/s'
2005	hom(:,2,9,:) = SPREAD( zu, 2, statistic_regions+1 )
2006	hom(nzb,2,9,:) = 0.0
2007	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2008	dopr_initial_index(i) = 23
2009	hom(:,2,23,:) = hom(:,2,9,:)
2010	data_output_pr(i) = data_output_pr(i)(2:)
2011	ENDIF
2012
2013	CASE ( 'kh', '#kh' )
2014	dopr_index(i) = 10
2015	dopr_unit(i) = 'm2/s'
2016	hom(:,2,10,:) = SPREAD( zu, 2, statistic_regions+1 )
2017	hom(nzb,2,10,:) = 0.0
2018	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2019	dopr_initial_index(i) = 24
2020	hom(:,2,24,:) = hom(:,2,10,:)
2021	data_output_pr(i) = data_output_pr(i)(2:)
2022	ENDIF
2023
2024	CASE ( 'l', '#l' )
2025	dopr_index(i) = 11
2026	dopr_unit(i) = 'm'
2027	hom(:,2,11,:) = SPREAD( zu, 2, statistic_regions+1 )
2028	hom(nzb,2,11,:) = 0.0
2029	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2030	dopr_initial_index(i) = 25
2031	hom(:,2,25,:) = hom(:,2,11,:)
2032	data_output_pr(i) = data_output_pr(i)(2:)
2033	ENDIF
2034
2035	CASE ( 'w"u"' )
2036	dopr_index(i) = 12
2037	dopr_unit(i) = 'm2/s2'
2038	hom(:,2,12,:) = SPREAD( zw, 2, statistic_regions+1 )
2039	IF ( prandtl_layer ) hom(nzb,2,12,:) = zu(1)
2040
2041	CASE ( 'wu' )
2042	dopr_index(i) = 13
2043	dopr_unit(i) = 'm2/s2'
2044	hom(:,2,13,:) = SPREAD( zw, 2, statistic_regions+1 )
2045
2046	CASE ( 'w"v"' )
2047	dopr_index(i) = 14
2048	dopr_unit(i) = 'm2/s2'
2049	hom(:,2,14,:) = SPREAD( zw, 2, statistic_regions+1 )
2050	IF ( prandtl_layer ) hom(nzb,2,14,:) = zu(1)
2051
2052	CASE ( 'wv' )
2053	dopr_index(i) = 15
2054	dopr_unit(i) = 'm2/s2'
2055	hom(:,2,15,:) = SPREAD( zw, 2, statistic_regions+1 )
2056
2057	CASE ( 'w"pt"' )
2058	dopr_index(i) = 16
2059	dopr_unit(i) = 'K m/s'
2060	hom(:,2,16,:) = SPREAD( zw, 2, statistic_regions+1 )
2061
2062	CASE ( 'wpt' )
2063	dopr_index(i) = 17
2064	dopr_unit(i) = 'K m/s'
2065	hom(:,2,17,:) = SPREAD( zw, 2, statistic_regions+1 )
2066
2067	CASE ( 'wpt' )
2068	dopr_index(i) = 18
2069	dopr_unit(i) = 'K m/s'
2070	hom(:,2,18,:) = SPREAD( zw, 2, statistic_regions+1 )
2071
2072	CASE ( 'wu' )
2073	dopr_index(i) = 19
2074	dopr_unit(i) = 'm2/s2'
2075	hom(:,2,19,:) = SPREAD( zw, 2, statistic_regions+1 )
2076	IF ( prandtl_layer ) hom(nzb,2,19,:) = zu(1)
2077
2078	CASE ( 'wv' )
2079	dopr_index(i) = 20
2080	dopr_unit(i) = 'm2/s2'
2081	hom(:,2,20,:) = SPREAD( zw, 2, statistic_regions+1 )
2082	IF ( prandtl_layer ) hom(nzb,2,20,:) = zu(1)
2083
2084	CASE ( 'wptBC' )
2085	dopr_index(i) = 21
2086	dopr_unit(i) = 'K m/s'
2087	hom(:,2,21,:) = SPREAD( zw, 2, statistic_regions+1 )
2088
2089	CASE ( 'wptBC' )
2090	dopr_index(i) = 22
2091	dopr_unit(i) = 'K m/s'
2092	hom(:,2,22,:) = SPREAD( zw, 2, statistic_regions+1 )
2093
2094	CASE ( 'sa', '#sa' )
2095	IF ( .NOT. ocean ) THEN
2096	message_string = 'data_output_pr = ' // &
2097	TRIM( data_output_pr(i) ) // ' is not imp' // &
2098	'lemented for ocean = .FALSE.'
2099	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2100	ELSE
2101	dopr_index(i) = 23
2102	dopr_unit(i) = 'psu'
2103	hom(:,2,23,:) = SPREAD( zu, 2, statistic_regions+1 )
2104	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2105	dopr_initial_index(i) = 26
2106	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2107	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
2108	data_output_pr(i) = data_output_pr(i)(2:)
2109	ENDIF
2110	ENDIF
2111
2112	CASE ( 'u*2' )
2113	dopr_index(i) = 30
2114	dopr_unit(i) = 'm2/s2'
2115	hom(:,2,30,:) = SPREAD( zu, 2, statistic_regions+1 )
2116
2117	CASE ( 'v*2' )
2118	dopr_index(i) = 31
2119	dopr_unit(i) = 'm2/s2'
2120	hom(:,2,31,:) = SPREAD( zu, 2, statistic_regions+1 )
2121
2122	CASE ( 'w*2' )
2123	dopr_index(i) = 32
2124	dopr_unit(i) = 'm2/s2'
2125	hom(:,2,32,:) = SPREAD( zw, 2, statistic_regions+1 )
2126
2127	CASE ( 'pt*2' )
2128	dopr_index(i) = 33
2129	dopr_unit(i) = 'K2'
2130	hom(:,2,33,:) = SPREAD( zu, 2, statistic_regions+1 )
2131
2132	CASE ( 'e*' )
2133	dopr_index(i) = 34
2134	dopr_unit(i) = 'm2/s2'
2135	hom(:,2,34,:) = SPREAD( zu, 2, statistic_regions+1 )
2136
2137	CASE ( 'w2pt' )
2138	dopr_index(i) = 35
2139	dopr_unit(i) = 'K m2/s2'
2140	hom(:,2,35,:) = SPREAD( zw, 2, statistic_regions+1 )
2141
2142	CASE ( 'wpt2' )
2143	dopr_index(i) = 36
2144	dopr_unit(i) = 'K2 m/s'
2145	hom(:,2,36,:) = SPREAD( zw, 2, statistic_regions+1 )
2146
2147	CASE ( 'we' )
2148	dopr_index(i) = 37
2149	dopr_unit(i) = 'm3/s3'
2150	hom(:,2,37,:) = SPREAD( zw, 2, statistic_regions+1 )
2151
2152	CASE ( 'w*3' )
2153	dopr_index(i) = 38
2154	dopr_unit(i) = 'm3/s3'
2155	hom(:,2,38,:) = SPREAD( zw, 2, statistic_regions+1 )
2156
2157	CASE ( 'Sw' )
2158	dopr_index(i) = 39
2159	dopr_unit(i) = 'none'
2160	hom(:,2,39,:) = SPREAD( zw, 2, statistic_regions+1 )
2161
2162	CASE ( 'p' )
2163	dopr_index(i) = 40
2164	dopr_unit(i) = 'Pa'
2165	hom(:,2,40,:) = SPREAD( zu, 2, statistic_regions+1 )
2166
2167	CASE ( 'q', '#q' )
2168	IF ( .NOT. humidity ) THEN
2169	message_string = 'data_output_pr = ' // &
2170	TRIM( data_output_pr(i) ) // ' is not imp' // &
2171	'lemented for humidity = .FALSE.'
2172	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2173	ELSE
2174	dopr_index(i) = 41
2175	dopr_unit(i) = 'kg/kg'
2176	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
2177	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2178	dopr_initial_index(i) = 26
2179	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2180	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
2181	data_output_pr(i) = data_output_pr(i)(2:)
2182	ENDIF
2183	ENDIF
2184
2185	CASE ( 's', '#s' )
2186	IF ( .NOT. passive_scalar ) THEN
2187	message_string = 'data_output_pr = ' // &
2188	TRIM( data_output_pr(i) ) // ' is not imp' // &
2189	'lemented for passive_scalar = .FALSE.'
2190	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2191	ELSE
2192	dopr_index(i) = 41
2193	dopr_unit(i) = 'kg/m3'
2194	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
2195	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2196	dopr_initial_index(i) = 26
2197	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2198	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
2199	data_output_pr(i) = data_output_pr(i)(2:)
2200	ENDIF
2201	ENDIF
2202
2203	CASE ( 'qv', '#qv' )
2204	IF ( .NOT. cloud_physics ) THEN
2205	dopr_index(i) = 41
2206	dopr_unit(i) = 'kg/kg'
2207	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
2208	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2209	dopr_initial_index(i) = 26
2210	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2211	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
2212	data_output_pr(i) = data_output_pr(i)(2:)
2213	ENDIF
2214	ELSE
2215	dopr_index(i) = 42
2216	dopr_unit(i) = 'kg/kg'
2217	hom(:,2,42,:) = SPREAD( zu, 2, statistic_regions+1 )
2218	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2219	dopr_initial_index(i) = 27
2220	hom(:,2,27,:) = SPREAD( zu, 2, statistic_regions+1 )
2221	hom(nzb,2,27,:) = 0.0 ! weil zu(nzb) negativ ist
2222	data_output_pr(i) = data_output_pr(i)(2:)
2223	ENDIF
2224	ENDIF
2225
2226	CASE ( 'lpt', '#lpt' )
2227	IF ( .NOT. cloud_physics ) THEN
2228	message_string = 'data_output_pr = ' // &
2229	TRIM( data_output_pr(i) ) // ' is not imp' // &
2230	'lemented for cloud_physics = .FALSE.'
2231	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2232	ELSE
2233	dopr_index(i) = 4
2234	dopr_unit(i) = 'K'
2235	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
2236	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2237	dopr_initial_index(i) = 7
2238	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
2239	hom(nzb,2,7,:) = 0.0 ! weil zu(nzb) negativ ist
2240	data_output_pr(i) = data_output_pr(i)(2:)
2241	ENDIF
2242	ENDIF
2243
2244	CASE ( 'vpt', '#vpt' )
2245	dopr_index(i) = 44
2246	dopr_unit(i) = 'K'
2247	hom(:,2,44,:) = SPREAD( zu, 2, statistic_regions+1 )
2248	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2249	dopr_initial_index(i) = 29
2250	hom(:,2,29,:) = SPREAD( zu, 2, statistic_regions+1 )
2251	hom(nzb,2,29,:) = 0.0 ! weil zu(nzb) negativ ist
2252	data_output_pr(i) = data_output_pr(i)(2:)
2253	ENDIF
2254
2255	CASE ( 'w"vpt"' )
2256	dopr_index(i) = 45
2257	dopr_unit(i) = 'K m/s'
2258	hom(:,2,45,:) = SPREAD( zw, 2, statistic_regions+1 )
2259
2260	CASE ( 'wvpt' )
2261	dopr_index(i) = 46
2262	dopr_unit(i) = 'K m/s'
2263	hom(:,2,46,:) = SPREAD( zw, 2, statistic_regions+1 )
2264
2265	CASE ( 'wvpt' )
2266	dopr_index(i) = 47
2267	dopr_unit(i) = 'K m/s'
2268	hom(:,2,47,:) = SPREAD( zw, 2, statistic_regions+1 )
2269
2270	CASE ( 'w"q"' )
2271	IF ( .NOT. humidity ) THEN
2272	message_string = 'data_output_pr = ' // &
2273	TRIM( data_output_pr(i) ) // ' is not imp' // &
2274	'lemented for humidity = .FALSE.'
2275	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2276	ELSE
2277	dopr_index(i) = 48
2278	dopr_unit(i) = 'kg/kg m/s'
2279	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2280	ENDIF
2281
2282	CASE ( 'wq' )
2283	IF ( .NOT. humidity ) THEN
2284	message_string = 'data_output_pr = ' // &
2285	TRIM( data_output_pr(i) ) // ' is not imp' // &
2286	'lemented for humidity = .FALSE.'
2287	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2288	ELSE
2289	dopr_index(i) = 49
2290	dopr_unit(i) = 'kg/kg m/s'
2291	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2292	ENDIF
2293
2294	CASE ( 'wq' )
2295	IF ( .NOT. humidity ) THEN
2296	message_string = 'data_output_pr = ' // &
2297	TRIM( data_output_pr(i) ) // ' is not imp' // &
2298	'lemented for humidity = .FALSE.'
2299	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2300	ELSE
2301	dopr_index(i) = 50
2302	dopr_unit(i) = 'kg/kg m/s'
2303	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2304	ENDIF
2305
2306	CASE ( 'w"s"' )
2307	IF ( .NOT. passive_scalar ) THEN
2308	message_string = 'data_output_pr = ' // &
2309	TRIM( data_output_pr(i) ) // ' is not imp' // &
2310	'lemented for passive_scalar = .FALSE.'
2311	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2312	ELSE
2313	dopr_index(i) = 48
2314	dopr_unit(i) = 'kg/m3 m/s'
2315	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2316	ENDIF
2317
2318	CASE ( 'ws' )
2319	IF ( .NOT. passive_scalar ) THEN
2320	message_string = 'data_output_pr = ' // &
2321	TRIM( data_output_pr(i) ) // ' is not imp' // &
2322	'lemented for passive_scalar = .FALSE.'
2323	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2324	ELSE
2325	dopr_index(i) = 49
2326	dopr_unit(i) = 'kg/m3 m/s'
2327	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2328	ENDIF
2329
2330	CASE ( 'ws' )
2331	IF ( .NOT. passive_scalar ) THEN
2332	message_string = 'data_output_pr = ' // &
2333	TRIM( data_output_pr(i) ) // ' is not imp' // &
2334	'lemented for passive_scalar = .FALSE.'
2335	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2336	ELSE
2337	dopr_index(i) = 50
2338	dopr_unit(i) = 'kg/m3 m/s'
2339	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2340	ENDIF
2341
2342	CASE ( 'w"qv"' )
2343	IF ( humidity .AND. .NOT. cloud_physics ) &
2344	THEN
2345	dopr_index(i) = 48
2346	dopr_unit(i) = 'kg/kg m/s'
2347	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2348	ELSEIF( humidity .AND. cloud_physics ) THEN
2349	dopr_index(i) = 51
2350	dopr_unit(i) = 'kg/kg m/s'
2351	hom(:,2,51,:) = SPREAD( zw, 2, statistic_regions+1 )
2352	ELSE
2353	message_string = 'data_output_pr = ' // &
2354	TRIM( data_output_pr(i) ) // ' is not imp' // &
2355	'lemented for cloud_physics = .FALSE. an&' // &
2356	'd humidity = .FALSE.'
2357	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2358	ENDIF
2359
2360	CASE ( 'wqv' )
2361	IF ( humidity .AND. .NOT. cloud_physics ) &
2362	THEN
2363	dopr_index(i) = 49
2364	dopr_unit(i) = 'kg/kg m/s'
2365	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2366	ELSEIF( humidity .AND. cloud_physics ) THEN
2367	dopr_index(i) = 52
2368	dopr_unit(i) = 'kg/kg m/s'
2369	hom(:,2,52,:) = SPREAD( zw, 2, statistic_regions+1 )
2370	ELSE
2371	message_string = 'data_output_pr = ' // &
2372	TRIM( data_output_pr(i) ) // ' is not imp' // &
2373	'lemented for cloud_physics = .FALSE. an&' // &
2374	'd humidity = .FALSE.'
2375	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2376	ENDIF
2377
2378	CASE ( 'wqv' )
2379	IF ( humidity .AND. .NOT. cloud_physics ) &
2380	THEN
2381	dopr_index(i) = 50
2382	dopr_unit(i) = 'kg/kg m/s'
2383	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2384	ELSEIF( humidity .AND. cloud_physics ) THEN
2385	dopr_index(i) = 53
2386	dopr_unit(i) = 'kg/kg m/s'
2387	hom(:,2,53,:) = SPREAD( zw, 2, statistic_regions+1 )
2388	ELSE
2389	message_string = 'data_output_pr = ' // &
2390	TRIM( data_output_pr(i) ) // ' is not imp' // &
2391	'lemented for cloud_physics = .FALSE. an&' // &
2392	'd humidity = .FALSE.'
2393	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2394	ENDIF
2395
2396	CASE ( 'ql' )
2397	IF ( .NOT. cloud_physics .AND. .NOT. cloud_droplets ) THEN
2398	message_string = 'data_output_pr = ' // &
2399	TRIM( data_output_pr(i) ) // ' is not imp' // &
2400	'lemented for cloud_physics = .FALSE. or' // &
2401	'&cloud_droplets = .FALSE.'
2402	CALL message( 'check_parameters', 'PA0096', 1, 2, 0, 6, 0 )
2403	ELSE
2404	dopr_index(i) = 54
2405	dopr_unit(i) = 'kg/kg'
2406	hom(:,2,54,:) = SPREAD( zu, 2, statistic_regions+1 )
2407	ENDIF
2408
2409	CASE ( 'wuu*:dz' )
2410	dopr_index(i) = 55
2411	dopr_unit(i) = 'm2/s3'
2412	hom(:,2,55,:) = SPREAD( zu, 2, statistic_regions+1 )
2413
2414	CASE ( 'wp:dz' )
2415	dopr_index(i) = 56
2416	dopr_unit(i) = 'm2/s3'
2417	hom(:,2,56,:) = SPREAD( zw, 2, statistic_regions+1 )
2418
2419	CASE ( 'w"e:dz' )
2420	dopr_index(i) = 57
2421	dopr_unit(i) = 'm2/s3'
2422	hom(:,2,57,:) = SPREAD( zu, 2, statistic_regions+1 )
2423
2424
2425	CASE ( 'u"pt"' )
2426	dopr_index(i) = 58
2427	dopr_unit(i) = 'K m/s'
2428	hom(:,2,58,:) = SPREAD( zu, 2, statistic_regions+1 )
2429
2430	CASE ( 'upt' )
2431	dopr_index(i) = 59
2432	dopr_unit(i) = 'K m/s'
2433	hom(:,2,59,:) = SPREAD( zu, 2, statistic_regions+1 )
2434
2435	CASE ( 'upt_t' )
2436	dopr_index(i) = 60
2437	dopr_unit(i) = 'K m/s'
2438	hom(:,2,60,:) = SPREAD( zu, 2, statistic_regions+1 )
2439
2440	CASE ( 'v"pt"' )
2441	dopr_index(i) = 61
2442	dopr_unit(i) = 'K m/s'
2443	hom(:,2,61,:) = SPREAD( zu, 2, statistic_regions+1 )
2444
2445	CASE ( 'vpt' )
2446	dopr_index(i) = 62
2447	dopr_unit(i) = 'K m/s'
2448	hom(:,2,62,:) = SPREAD( zu, 2, statistic_regions+1 )
2449
2450	CASE ( 'vpt_t' )
2451	dopr_index(i) = 63
2452	dopr_unit(i) = 'K m/s'
2453	hom(:,2,63,:) = SPREAD( zu, 2, statistic_regions+1 )
2454
2455	CASE ( 'rho' )
2456	IF ( .NOT. ocean ) THEN
2457	message_string = 'data_output_pr = ' // &
2458	TRIM( data_output_pr(i) ) // ' is not imp' // &
2459	'lemented for ocean = .FALSE.'
2460	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2461	ELSE
2462	dopr_index(i) = 64
2463	dopr_unit(i) = 'kg/m3'
2464	hom(:,2,64,:) = SPREAD( zu, 2, statistic_regions+1 )
2465	ENDIF
2466
2467	CASE ( 'w"sa"' )
2468	IF ( .NOT. ocean ) THEN
2469	message_string = 'data_output_pr = ' // &
2470	TRIM( data_output_pr(i) ) // ' is not imp' // &
2471	'lemented for ocean = .FALSE.'
2472	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2473	ELSE
2474	dopr_index(i) = 65
2475	dopr_unit(i) = 'psu m/s'
2476	hom(:,2,65,:) = SPREAD( zw, 2, statistic_regions+1 )
2477	ENDIF
2478
2479	CASE ( 'wsa' )
2480	IF ( .NOT. ocean ) THEN
2481	message_string = 'data_output_pr = ' // &
2482	TRIM( data_output_pr(i) ) // ' is not imp' // &
2483	'lemented for ocean = .FALSE.'
2484	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2485	ELSE
2486	dopr_index(i) = 66
2487	dopr_unit(i) = 'psu m/s'
2488	hom(:,2,66,:) = SPREAD( zw, 2, statistic_regions+1 )
2489	ENDIF
2490
2491	CASE ( 'wsa' )
2492	IF ( .NOT. ocean ) THEN
2493	message_string = 'data_output_pr = ' // &
2494	TRIM( data_output_pr(i) ) // ' is not imp' // &
2495	'lemented for ocean = .FALSE.'
2496	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2497	ELSE
2498	dopr_index(i) = 67
2499	dopr_unit(i) = 'psu m/s'
2500	hom(:,2,67,:) = SPREAD( zw, 2, statistic_regions+1 )
2501	ENDIF
2502
2503	CASE ( 'wp' )
2504	dopr_index(i) = 68
2505	dopr_unit(i) = 'm3/s3'
2506	hom(:,2,68,:) = SPREAD( zu, 2, statistic_regions+1 )
2507
2508	CASE ( 'w"e' )
2509	dopr_index(i) = 69
2510	dopr_unit(i) = 'm3/s3'
2511	hom(:,2,69,:) = SPREAD( zu, 2, statistic_regions+1 )
2512
2513	CASE ( 'q*2' )
2514	IF ( .NOT. humidity ) THEN
2515	message_string = 'data_output_pr = ' // &
2516	TRIM( data_output_pr(i) ) // ' is not imp' // &
2517	'lemented for humidity = .FALSE.'
2518	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2519	ELSE
2520	dopr_index(i) = 70
2521	dopr_unit(i) = 'kg2/kg2'
2522	hom(:,2,70,:) = SPREAD( zu, 2, statistic_regions+1 )
2523	ENDIF
2524
2525	CASE ( 'prho' )
2526	IF ( .NOT. ocean ) THEN
2527	message_string = 'data_output_pr = ' // &
2528	TRIM( data_output_pr(i) ) // ' is not imp' // &
2529	'lemented for ocean = .FALSE.'
2530	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2531	ELSE
2532	dopr_index(i) = 71
2533	dopr_unit(i) = 'kg/m3'
2534	hom(:,2,71,:) = SPREAD( zu, 2, statistic_regions+1 )
2535	ENDIF
2536
2537	CASE ( 'hyp' )
2538	dopr_index(i) = 72
2539	dopr_unit(i) = 'dbar'
2540	hom(:,2,72,:) = SPREAD( zu, 2, statistic_regions+1 )
2541
2542	CASE ( 'nr' )
2543	IF ( .NOT. cloud_physics ) THEN
2544	message_string = 'data_output_pr = ' // &
2545	TRIM( data_output_pr(i) ) // ' is not imp' // &
2546	'lemented for cloud_physics = .FALSE.'
2547	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2548	ELSEIF ( icloud_scheme /= 0 ) THEN
2549	message_string = 'data_output_pr = ' // &
2550	TRIM( data_output_pr(i) ) // ' is not imp' // &
2551	'lemented for cloud_scheme /= seifert_beheng'
2552	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
2553	ELSEIF ( .NOT. precipitation ) THEN
2554	message_string = 'data_output_pr = ' // &
2555	TRIM( data_output_pr(i) ) // ' is not imp' // &
2556	'lemented for precipitation = .FALSE.'
2557	CALL message( 'check_parameters', 'PA0361', 1, 2, 0, 6, 0 )
2558	ELSE
2559	dopr_index(i) = 73
2560	dopr_unit(i) = '1/m3'
2561	hom(:,2,73,:) = SPREAD( zu, 2, statistic_regions+1 )
2562	ENDIF
2563
2564	CASE ( 'qr' )
2565	IF ( .NOT. cloud_physics ) THEN
2566	message_string = 'data_output_pr = ' // &
2567	TRIM( data_output_pr(i) ) // ' is not imp' // &
2568	'lemented for cloud_physics = .FALSE.'
2569	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2570	ELSEIF ( icloud_scheme /= 0 ) THEN
2571	message_string = 'data_output_pr = ' // &
2572	TRIM( data_output_pr(i) ) // ' is not imp' // &
2573	'lemented for cloud_scheme /= seifert_beheng'
2574	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
2575	ELSEIF ( .NOT. precipitation ) THEN
2576	message_string = 'data_output_pr = ' // &
2577	TRIM( data_output_pr(i) ) // ' is not imp' // &
2578	'lemented for precipitation = .FALSE.'
2579	CALL message( 'check_parameters', 'PA0361', 1, 2, 0, 6, 0 )
2580	ELSE
2581	dopr_index(i) = 74
2582	dopr_unit(i) = 'kg/kg'
2583	hom(:,2,74,:) = SPREAD( zu, 2, statistic_regions+1 )
2584	ENDIF
2585
2586	CASE ( 'qc' )
2587	IF ( .NOT. cloud_physics ) THEN
2588	message_string = 'data_output_pr = ' // &
2589	TRIM( data_output_pr(i) ) // ' is not imp' // &
2590	'lemented for cloud_physics = .FALSE.'
2591	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2592	ELSEIF ( icloud_scheme /= 0 ) THEN
2593	message_string = 'data_output_pr = ' // &
2594	TRIM( data_output_pr(i) ) // ' is not imp' // &
2595	'lemented for cloud_scheme /= seifert_beheng'
2596	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
2597	ELSE
2598	dopr_index(i) = 75
2599	dopr_unit(i) = 'kg/kg'
2600	hom(:,2,75,:) = SPREAD( zu, 2, statistic_regions+1 )
2601	ENDIF
2602
2603	CASE ( 'prr' )
2604	IF ( .NOT. cloud_physics ) THEN
2605	message_string = 'data_output_pr = ' // &
2606	TRIM( data_output_pr(i) ) // ' is not imp' // &
2607	'lemented for cloud_physics = .FALSE.'
2608	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2609	ELSEIF ( icloud_scheme /= 0 ) THEN
2610	message_string = 'data_output_pr = ' // &
2611	TRIM( data_output_pr(i) ) // ' is not imp' // &
2612	'lemented for cloud_scheme /= seifert_beheng'
2613	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
2614	ELSEIF ( .NOT. precipitation ) THEN
2615	message_string = 'data_output_pr = ' // &
2616	TRIM( data_output_pr(i) ) // ' is not imp' // &
2617	'lemented for precipitation = .FALSE.'
2618	CALL message( 'check_parameters', 'PA0361', 1, 2, 0, 6, 0 )
2619
2620	ELSE
2621	dopr_index(i) = 76
2622	dopr_unit(i) = 'kg/kg m/s'
2623	hom(:,2,76,:) = SPREAD( zu, 2, statistic_regions+1 )
2624	ENDIF
2625
2626	CASE DEFAULT
2627
2628	CALL user_check_data_output_pr( data_output_pr(i), i, unit )
2629
2630	IF ( unit == 'illegal' ) THEN
2631	IF ( data_output_pr_user(1) /= ' ' ) THEN
2632	message_string = 'illegal value for data_output_pr or ' // &
2633	'data_output_pr_user = "' // &
2634	TRIM( data_output_pr(i) ) // '"'
2635	CALL message( 'check_parameters', 'PA0097', 1, 2, 0, 6, 0 )
2636	ELSE
2637	message_string = 'illegal value for data_output_pr = "' // &
2638	TRIM( data_output_pr(i) ) // '"'
2639	CALL message( 'check_parameters', 'PA0098', 1, 2, 0, 6, 0 )
2640	ENDIF
2641	ENDIF
2642
2643	END SELECT
2644
2645	ENDDO
2646
2647
2648	!
2649	!-- Append user-defined data output variables to the standard data output
2650	IF ( data_output_user(1) /= ' ' ) THEN
2651	i = 1
2652	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
2653	i = i + 1
2654	ENDDO
2655	j = 1
2656	DO WHILE ( data_output_user(j) /= ' ' .AND. j <= 100 )
2657	IF ( i > 100 ) THEN
2658	message_string = 'number of output quantitities given by data' // &
2659	'_output and data_output_user exceeds the limit of 100'
2660	CALL message( 'check_parameters', 'PA0102', 1, 2, 0, 6, 0 )
2661	ENDIF
2662	data_output(i) = data_output_user(j)
2663	i = i + 1
2664	j = j + 1
2665	ENDDO
2666	ENDIF
2667
2668	!
2669	!-- Check and set steering parameters for 2d/3d data output and averaging
2670	i = 1
2671	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
2672	!
2673	!-- Check for data averaging
2674	ilen = LEN_TRIM( data_output(i) )
2675	j = 0 ! no data averaging
2676	IF ( ilen > 3 ) THEN
2677	IF ( data_output(i)(ilen-2:ilen) == '_av' ) THEN
2678	j = 1 ! data averaging
2679	data_output(i) = data_output(i)(1:ilen-3)
2680	ENDIF
2681	ENDIF
2682	!
2683	!-- Check for cross section or volume data
2684	ilen = LEN_TRIM( data_output(i) )
2685	k = 0 ! 3d data
2686	var = data_output(i)(1:ilen)
2687	IF ( ilen > 3 ) THEN
2688	IF ( data_output(i)(ilen-2:ilen) == '_xy' .OR. &
2689	data_output(i)(ilen-2:ilen) == '_xz' .OR. &
2690	data_output(i)(ilen-2:ilen) == '_yz' ) THEN
2691	k = 1 ! 2d data
2692	var = data_output(i)(1:ilen-3)
2693	ENDIF
2694	ENDIF
2695	!
2696	!-- Check for allowed value and set units
2697	SELECT CASE ( TRIM( var ) )
2698
2699	CASE ( 'e' )
2700	IF ( constant_diffusion ) THEN
2701	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2702	'res constant_diffusion = .FALSE.'
2703	CALL message( 'check_parameters', 'PA0103', 1, 2, 0, 6, 0 )
2704	ENDIF
2705	unit = 'm2/s2'
2706
2707	CASE ( 'lpt' )
2708	IF ( .NOT. cloud_physics ) THEN
2709	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2710	'res cloud_physics = .TRUE.'
2711	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2712	ENDIF
2713	unit = 'K'
2714
2715	CASE ( 'nr' )
2716	IF ( .NOT. cloud_physics ) THEN
2717	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2718	'res cloud_physics = .TRUE.'
2719	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2720	ELSEIF ( icloud_scheme /= 0 ) THEN
2721	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2722	'res cloud_scheme = seifert_beheng'
2723	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
2724	ENDIF
2725	unit = '1/m3'
2726
2727	CASE ( 'pc', 'pr' )
2728	IF ( .NOT. particle_advection ) THEN
2729	message_string = 'output of "' // TRIM( var ) // '" requir' // &
2730	'es a "particles_par"-NAMELIST in the parameter file (PARIN)'
2731	CALL message( 'check_parameters', 'PA0104', 1, 2, 0, 6, 0 )
2732	ENDIF
2733	IF ( TRIM( var ) == 'pc' ) unit = 'number'
2734	IF ( TRIM( var ) == 'pr' ) unit = 'm'
2735
2736	CASE ( 'prr' )
2737	IF ( .NOT. cloud_physics ) THEN
2738	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2739	'res cloud_physics = .TRUE.'
2740	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2741	ELSEIF ( icloud_scheme /= 0 ) THEN
2742	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2743	'res cloud_scheme = seifert_beheng'
2744	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
2745	ELSEIF ( .NOT. precipitation ) THEN
2746	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2747	'res precipitation = .TRUE.'
2748	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2749	ENDIF
2750	unit = 'kg/kg m/s'
2751
2752	CASE ( 'q', 'vpt' )
2753	IF ( .NOT. humidity ) THEN
2754	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2755	'res humidity = .TRUE.'
2756	CALL message( 'check_parameters', 'PA0105', 1, 2, 0, 6, 0 )
2757	ENDIF
2758	IF ( TRIM( var ) == 'q' ) unit = 'kg/kg'
2759	IF ( TRIM( var ) == 'vpt' ) unit = 'K'
2760
2761	CASE ( 'qc' )
2762	IF ( .NOT. cloud_physics ) THEN
2763	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2764	'res cloud_physics = .TRUE.'
2765	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2766	ELSEIF ( icloud_scheme /= 0 ) THEN
2767	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2768	'res cloud_scheme = seifert_beheng'
2769	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
2770	ENDIF
2771	unit = 'kg/kg'
2772
2773	CASE ( 'ql' )
2774	IF ( .NOT. ( cloud_physics .OR. cloud_droplets ) ) THEN
2775	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2776	'res cloud_physics = .TRUE. or cloud_droplets = .TRUE.'
2777	CALL message( 'check_parameters', 'PA0106', 1, 2, 0, 6, 0 )
2778	ENDIF
2779	unit = 'kg/kg'
2780
2781	CASE ( 'ql_c', 'ql_v', 'ql_vp' )
2782	IF ( .NOT. cloud_droplets ) THEN
2783	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2784	'res cloud_droplets = .TRUE.'
2785	CALL message( 'check_parameters', 'PA0107', 1, 2, 0, 6, 0 )
2786	ENDIF
2787	IF ( TRIM( var ) == 'ql_c' ) unit = 'kg/kg'
2788	IF ( TRIM( var ) == 'ql_v' ) unit = 'm3'
2789	IF ( TRIM( var ) == 'ql_vp' ) unit = 'none'
2790
2791	CASE ( 'qr' )
2792	IF ( .NOT. cloud_physics ) THEN
2793	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2794	'res cloud_physics = .TRUE.'
2795	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2796	ELSEIF ( icloud_scheme /= 0 ) THEN
2797	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2798	'res cloud_scheme = seifert_beheng'
2799	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
2800	ELSEIF ( .NOT. precipitation ) THEN
2801	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2802	'res precipitation = .TRUE.'
2803	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2804	ENDIF
2805	unit = 'kg/kg'
2806
2807	CASE ( 'qv' )
2808	IF ( .NOT. cloud_physics ) THEN
2809	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2810	'res cloud_physics = .TRUE.'
2811	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2812	ENDIF
2813	unit = 'kg/kg'
2814
2815	CASE ( 'rho' )
2816	IF ( .NOT. ocean ) THEN
2817	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2818	'res ocean = .TRUE.'
2819	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
2820	ENDIF
2821	unit = 'kg/m3'
2822
2823	CASE ( 's' )
2824	IF ( .NOT. passive_scalar ) THEN
2825	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2826	'res passive_scalar = .TRUE.'
2827	CALL message( 'check_parameters', 'PA0110', 1, 2, 0, 6, 0 )
2828	ENDIF
2829	unit = 'conc'
2830
2831	CASE ( 'sa' )
2832	IF ( .NOT. ocean ) THEN
2833	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2834	'res ocean = .TRUE.'
2835	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
2836	ENDIF
2837	unit = 'psu'
2838
2839	CASE ( 'u', 't', 'lwp', 'pra', 'prr', 'qsws', 'shf', 'z0', 'z0h*' )
2840	IF ( k == 0 .OR. data_output(i)(ilen-2:ilen) /= '_xy' ) THEN
2841	message_string = 'illegal value for data_output: "' // &
2842	TRIM( var ) // '" & only 2d-horizontal ' // &
2843	'cross sections are allowed for this value'
2844	CALL message( 'check_parameters', 'PA0111', 1, 2, 0, 6, 0 )
2845	ENDIF
2846	IF ( TRIM( var ) == 'lwp*' .AND. .NOT. cloud_physics ) THEN
2847	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2848	'res cloud_physics = .TRUE.'
2849	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2850	ENDIF
2851	IF ( TRIM( var ) == 'pra*' .AND. .NOT. precipitation ) THEN
2852	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2853	'res precipitation = .TRUE.'
2854	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2855	ENDIF
2856	IF ( TRIM( var ) == 'pra*' .AND. j == 1 ) THEN
2857	message_string = 'temporal averaging of precipitation ' // &
2858	'amount "' // TRIM( var ) // '" is not possible'
2859	CALL message( 'check_parameters', 'PA0113', 1, 2, 0, 6, 0 )
2860	ENDIF
2861	IF ( TRIM( var ) == 'prr*' .AND. .NOT. precipitation ) THEN
2862	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2863	'res precipitation = .TRUE.'
2864	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2865	ENDIF
2866	IF ( TRIM( var ) == 'qsws*' .AND. .NOT. humidity ) THEN
2867	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2868	'res humidity = .TRUE.'
2869	CALL message( 'check_parameters', 'PA0322', 1, 2, 0, 6, 0 )
2870	ENDIF
2871
2872	IF ( TRIM( var ) == 'lwp' ) unit = 'kg/kgm'
2873	IF ( TRIM( var ) == 'pra*' ) unit = 'mm'
2874	IF ( TRIM( var ) == 'prr*' ) unit = 'mm/s'
2875	IF ( TRIM( var ) == 'qsws*' ) unit = 'kgm/kgs'
2876	IF ( TRIM( var ) == 'shf' ) unit = 'Km/s'
2877	IF ( TRIM( var ) == 't*' ) unit = 'K'
2878	IF ( TRIM( var ) == 'u*' ) unit = 'm/s'
2879	IF ( TRIM( var ) == 'z0*' ) unit = 'm'
2880	IF ( TRIM( var ) == 'z0h*' ) unit = 'm'
2881
2882
2883	CASE ( 'p', 'pt', 'u', 'v', 'w' )
2884	IF ( TRIM( var ) == 'p' ) unit = 'Pa'
2885	IF ( TRIM( var ) == 'pt' ) unit = 'K'
2886	IF ( TRIM( var ) == 'u' ) unit = 'm/s'
2887	IF ( TRIM( var ) == 'v' ) unit = 'm/s'
2888	IF ( TRIM( var ) == 'w' ) unit = 'm/s'
2889	CONTINUE
2890
2891	CASE DEFAULT
2892	CALL user_check_data_output( var, unit )
2893
2894	IF ( unit == 'illegal' ) THEN
2895	IF ( data_output_user(1) /= ' ' ) THEN
2896	message_string = 'illegal value for data_output or ' // &
2897	'data_output_user = "' // TRIM( data_output(i) ) // '"'
2898	CALL message( 'check_parameters', 'PA0114', 1, 2, 0, 6, 0 )
2899	ELSE
2900	message_string = 'illegal value for data_output =' // &
2901	TRIM( data_output(i) ) // '"'
2902	CALL message( 'check_parameters', 'PA0115', 1, 2, 0, 6, 0 )
2903	ENDIF
2904	ENDIF
2905
2906	END SELECT
2907	!
2908	!-- Set the internal steering parameters appropriately
2909	IF ( k == 0 ) THEN
2910	do3d_no(j) = do3d_no(j) + 1
2911	do3d(j,do3d_no(j)) = data_output(i)
2912	do3d_unit(j,do3d_no(j)) = unit
2913	ELSE
2914	do2d_no(j) = do2d_no(j) + 1
2915	do2d(j,do2d_no(j)) = data_output(i)
2916	do2d_unit(j,do2d_no(j)) = unit
2917	IF ( data_output(i)(ilen-2:ilen) == '_xy' ) THEN
2918	data_output_xy(j) = .TRUE.
2919	ENDIF
2920	IF ( data_output(i)(ilen-2:ilen) == '_xz' ) THEN
2921	data_output_xz(j) = .TRUE.
2922	ENDIF
2923	IF ( data_output(i)(ilen-2:ilen) == '_yz' ) THEN
2924	data_output_yz(j) = .TRUE.
2925	ENDIF
2926	ENDIF
2927
2928	IF ( j == 1 ) THEN
2929	!
2930	!-- Check, if variable is already subject to averaging
2931	found = .FALSE.
2932	DO k = 1, doav_n
2933	IF ( TRIM( doav(k) ) == TRIM( var ) ) found = .TRUE.
2934	ENDDO
2935
2936	IF ( .NOT. found ) THEN
2937	doav_n = doav_n + 1
2938	doav(doav_n) = var
2939	ENDIF
2940	ENDIF
2941
2942	i = i + 1
2943	ENDDO
2944
2945	!
2946	!-- Averaged 2d or 3d output requires that an averaging interval has been set
2947	IF ( doav_n > 0 .AND. averaging_interval == 0.0 ) THEN
2948	WRITE( message_string, * ) 'output of averaged quantity "', &
2949	TRIM( doav(1) ), '_av" requires to set a ', &
2950	'non-zero & averaging interval'
2951	CALL message( 'check_parameters', 'PA0323', 1, 2, 0, 6, 0 )
2952	ENDIF
2953
2954	!
2955	!-- Check sectional planes and store them in one shared array
2956	IF ( ANY( section_xy > nz + 1 ) ) THEN
2957	WRITE( message_string, * ) 'section_xy must be <= nz + 1 = ', nz + 1
2958	CALL message( 'check_parameters', 'PA0319', 1, 2, 0, 6, 0 )
2959	ENDIF
2960	IF ( ANY( section_xz > ny + 1 ) ) THEN
2961	WRITE( message_string, * ) 'section_xz must be <= ny + 1 = ', ny + 1
2962	CALL message( 'check_parameters', 'PA0320', 1, 2, 0, 6, 0 )
2963	ENDIF
2964	IF ( ANY( section_yz > nx + 1 ) ) THEN
2965	WRITE( message_string, * ) 'section_yz must be <= nx + 1 = ', nx + 1
2966	CALL message( 'check_parameters', 'PA0321', 1, 2, 0, 6, 0 )
2967	ENDIF
2968	section(:,1) = section_xy
2969	section(:,2) = section_xz
2970	section(:,3) = section_yz
2971
2972	!
2973	!-- Upper plot limit for 2D vertical sections
2974	IF ( z_max_do2d == -1.0 ) z_max_do2d = zu(nzt)
2975	IF ( z_max_do2d < zu(nzb+1) .OR. z_max_do2d > zu(nzt) ) THEN
2976	WRITE( message_string, * ) 'z_max_do2d = ', z_max_do2d, &
2977	' must be >= ', zu(nzb+1), '(zu(nzb+1)) and <= ', zu(nzt), &
2978	' (zu(nzt))'
2979	CALL message( 'check_parameters', 'PA0116', 1, 2, 0, 6, 0 )
2980	ENDIF
2981
2982	!
2983	!-- Upper plot limit for 3D arrays
2984	IF ( nz_do3d == -9999 ) nz_do3d = nzt + 1
2985
2986	!
2987	!-- Determine and check accuracy for compressed 3D plot output
2988	IF ( do3d_compress ) THEN
2989	!
2990	!-- Compression only permissible on T3E machines
2991	IF ( host(1:3) /= 't3e' ) THEN
2992	message_string = 'do3d_compress = .TRUE. not allowed on host "' // &
2993	TRIM( host ) // '"'
2994	CALL message( 'check_parameters', 'PA0117', 1, 2, 0, 6, 0 )
2995	ENDIF
2996
2997	i = 1
2998	DO WHILE ( do3d_comp_prec(i) /= ' ' )
2999
3000	ilen = LEN_TRIM( do3d_comp_prec(i) )
3001	IF ( LLT( do3d_comp_prec(i)(ilen:ilen), '0' ) .OR. &
3002	LGT( do3d_comp_prec(i)(ilen:ilen), '9' ) ) THEN
3003	WRITE( message_string, * ) 'illegal precision: do3d_comp_prec', &
3004	'(', i, ') = "', TRIM(do3d_comp_prec(i)),'"'
3005	CALL message( 'check_parameters', 'PA0118', 1, 2, 0, 6, 0 )
3006	ENDIF
3007
3008	prec = IACHAR( do3d_comp_prec(i)(ilen:ilen) ) - IACHAR( '0' )
3009	var = do3d_comp_prec(i)(1:ilen-1)
3010
3011	SELECT CASE ( var )
3012
3013	CASE ( 'u' )
3014	j = 1
3015	CASE ( 'v' )
3016	j = 2
3017	CASE ( 'w' )
3018	j = 3
3019	CASE ( 'p' )
3020	j = 4
3021	CASE ( 'pt' )
3022	j = 5
3023
3024	CASE DEFAULT
3025	WRITE( message_string, * ) 'unknown variable "', &
3026	TRIM( do3d_comp_prec(i) ), '" given for do3d_comp_prec(', &
3027	i, ')'
3028	CALL message( 'check_parameters', 'PA0119', 1, 2, 0, 6, 0 )
3029
3030	END SELECT
3031
3032	plot_3d_precision(j)%precision = prec
3033	i = i + 1
3034
3035	ENDDO
3036	ENDIF
3037
3038	!
3039	!-- Check the data output format(s)
3040	IF ( data_output_format(1) == ' ' ) THEN
3041	!
3042	!-- Default value
3043	netcdf_output = .TRUE.
3044	ELSE
3045	i = 1
3046	DO WHILE ( data_output_format(i) /= ' ' )
3047
3048	SELECT CASE ( data_output_format(i) )
3049
3050	CASE ( 'netcdf' )
3051	netcdf_output = .TRUE.
3052	CASE ( 'iso2d' )
3053	iso2d_output = .TRUE.
3054	CASE ( 'avs' )
3055	avs_output = .TRUE.
3056
3057	CASE DEFAULT
3058	message_string = 'unknown value for data_output_format "' // &
3059	TRIM( data_output_format(i) ) // '"'
3060	CALL message( 'check_parameters', 'PA0120', 1, 2, 0, 6, 0 )
3061
3062	END SELECT
3063
3064	i = i + 1
3065	IF ( i > 10 ) EXIT
3066
3067	ENDDO
3068	ENDIF
3069
3070	!
3071	!-- Set output format string (used in header)
3072	IF ( netcdf_output ) THEN
3073
3074	SELECT CASE ( netcdf_data_format )
3075	CASE ( 1 )
3076	output_format_netcdf = 'netCDF classic'
3077	CASE ( 2 )
3078	output_format_netcdf = 'netCDF 64bit offset'
3079	CASE ( 3 )
3080	output_format_netcdf = 'netCDF4/HDF5'
3081	CASE ( 4 )
3082	output_format_netcdf = 'netCDF4/HDF5 classic'
3083	CASE ( 5 )
3084	output_format_netcdf = 'parallel netCDF4/HDF5'
3085	CASE ( 6 )
3086	output_format_netcdf = 'parallel netCDF4/HDF5 classic'
3087
3088	END SELECT
3089
3090	ENDIF
3091
3092	!
3093	!-- Check mask conditions
3094	DO mid = 1, max_masks
3095	IF ( data_output_masks(mid,1) /= ' ' .OR. &
3096	data_output_masks_user(mid,1) /= ' ' ) THEN
3097	masks = masks + 1
3098	ENDIF
3099	ENDDO
3100
3101	IF ( masks < 0 .OR. masks > max_masks ) THEN
3102	WRITE( message_string, * ) 'illegal value: masks must be >= 0 and ', &
3103	'<= ', max_masks, ' (=max_masks)'
3104	CALL message( 'check_parameters', 'PA0325', 1, 2, 0, 6, 0 )
3105	ENDIF
3106	IF ( masks > 0 ) THEN
3107	mask_scale(1) = mask_scale_x
3108	mask_scale(2) = mask_scale_y
3109	mask_scale(3) = mask_scale_z
3110	IF ( ANY( mask_scale <= 0.0 ) ) THEN
3111	WRITE( message_string, * ) &
3112	'illegal value: mask_scale_x, mask_scale_y and mask_scale_z', &
3113	'must be > 0.0'
3114	CALL message( 'check_parameters', 'PA0326', 1, 2, 0, 6, 0 )
3115	ENDIF
3116	!
3117	!-- Generate masks for masked data output
3118	CALL init_masks
3119	ENDIF
3120
3121	!
3122	!-- Check the NetCDF data format
3123	#if ! defined ( __check )
3124	IF ( netcdf_data_format > 2 ) THEN
3125	#if defined( __netcdf4 )
3126	CONTINUE
3127	#else
3128	message_string = 'netCDF: netCDF4 format requested but no ' // &
3129	'cpp-directive __netcdf4 given & switch ' // &
3130	'back to 64-bit offset format'
3131	CALL message( 'check_parameters', 'PA0171', 0, 1, 0, 6, 0 )
3132	netcdf_data_format = 2
3133	#endif
3134	ENDIF
3135	IF ( netcdf_data_format > 4 ) THEN
3136	#if defined( __netcdf4 ) && defined( __netcdf4_parallel )
3137	CONTINUE
3138	#else
3139	message_string = 'netCDF: netCDF4 parallel output requested but no ' // &
3140	'cpp-directive __netcdf4_parallel given & switch ' // &
3141	'back to netCDF4 non-parallel output'
3142	CALL message( 'check_parameters', 'PA0099', 0, 1, 0, 6, 0 )
3143	netcdf_data_format = netcdf_data_format - 2
3144	#endif
3145	ENDIF
3146	#endif
3147
3148	#if ! defined( __check )
3149	!
3150	!-- Check netcdf precison
3151	ldum = .FALSE.
3152	CALL define_netcdf_header( 'ch', ldum, 0 )
3153	#endif
3154	!
3155	!-- Check, whether a constant diffusion coefficient shall be used
3156	IF ( km_constant /= -1.0 ) THEN
3157	IF ( km_constant < 0.0 ) THEN
3158	WRITE( message_string, * ) 'km_constant = ', km_constant, ' < 0.0'
3159	CALL message( 'check_parameters', 'PA0121', 1, 2, 0, 6, 0 )
3160	ELSE
3161	IF ( prandtl_number < 0.0 ) THEN
3162	WRITE( message_string, * ) 'prandtl_number = ', prandtl_number, &
3163	' < 0.0'
3164	CALL message( 'check_parameters', 'PA0122', 1, 2, 0, 6, 0 )
3165	ENDIF
3166	constant_diffusion = .TRUE.
3167
3168	IF ( prandtl_layer ) THEN
3169	message_string = 'prandtl_layer is not allowed with fixed ' // &
3170	'value of km'
3171	CALL message( 'check_parameters', 'PA0123', 1, 2, 0, 6, 0 )
3172	ENDIF
3173	ENDIF
3174	ENDIF
3175
3176	!
3177	!-- In case of non-cyclic lateral boundaries and a damping layer for the
3178	!-- potential temperature, check the width of the damping layer
3179	IF ( bc_lr /= 'cyclic' ) THEN
3180	IF ( pt_damping_width < 0.0 .OR. pt_damping_width > REAL( nx * dx ) ) THEN
3181	message_string = 'pt_damping_width out of range'
3182	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
3183	ENDIF
3184	ENDIF
3185
3186	IF ( bc_ns /= 'cyclic' ) THEN
3187	IF ( pt_damping_width < 0.0 .OR. pt_damping_width > REAL( ny * dy ) ) THEN
3188	message_string = 'pt_damping_width out of range'
3189	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
3190	ENDIF
3191	ENDIF
3192
3193	!
3194	!-- Check value range for rif
3195	IF ( rif_min >= rif_max ) THEN
3196	WRITE( message_string, * ) 'rif_min = ', rif_min, ' must be less ', &
3197	'than rif_max = ', rif_max
3198	CALL message( 'check_parameters', 'PA0125', 1, 2, 0, 6, 0 )
3199	ENDIF
3200
3201	!
3202	!-- Determine upper and lower hight level indices for random perturbations
3203	IF ( disturbance_level_b == -9999999.9 ) THEN
3204	IF ( ocean ) THEN
3205	disturbance_level_b = zu((nzt*2)/3)
3206	disturbance_level_ind_b = ( nzt * 2 ) / 3
3207	ELSE
3208	disturbance_level_b = zu(nzb+3)
3209	disturbance_level_ind_b = nzb + 3
3210	ENDIF
3211	ELSEIF ( disturbance_level_b < zu(3) ) THEN
3212	WRITE( message_string, * ) 'disturbance_level_b = ', &
3213	disturbance_level_b, ' must be >= ', zu(3), '(zu(3))'
3214	CALL message( 'check_parameters', 'PA0126', 1, 2, 0, 6, 0 )
3215	ELSEIF ( disturbance_level_b > zu(nzt-2) ) THEN
3216	WRITE( message_string, * ) 'disturbance_level_b = ', &
3217	disturbance_level_b, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
3218	CALL message( 'check_parameters', 'PA0127', 1, 2, 0, 6, 0 )
3219	ELSE
3220	DO k = 3, nzt-2
3221	IF ( disturbance_level_b <= zu(k) ) THEN
3222	disturbance_level_ind_b = k
3223	EXIT
3224	ENDIF
3225	ENDDO
3226	ENDIF
3227
3228	IF ( disturbance_level_t == -9999999.9 ) THEN
3229	IF ( ocean ) THEN
3230	disturbance_level_t = zu(nzt-3)
3231	disturbance_level_ind_t = nzt - 3
3232	ELSE
3233	disturbance_level_t = zu(nzt/3)
3234	disturbance_level_ind_t = nzt / 3
3235	ENDIF
3236	ELSEIF ( disturbance_level_t > zu(nzt-2) ) THEN
3237	WRITE( message_string, * ) 'disturbance_level_t = ', &
3238	disturbance_level_t, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
3239	CALL message( 'check_parameters', 'PA0128', 1, 2, 0, 6, 0 )
3240	ELSEIF ( disturbance_level_t < disturbance_level_b ) THEN
3241	WRITE( message_string, * ) 'disturbance_level_t = ', &
3242	disturbance_level_t, ' must be >= disturbance_level_b = ', &
3243	disturbance_level_b
3244	CALL message( 'check_parameters', 'PA0129', 1, 2, 0, 6, 0 )
3245	ELSE
3246	DO k = 3, nzt-2
3247	IF ( disturbance_level_t <= zu(k) ) THEN
3248	disturbance_level_ind_t = k
3249	EXIT
3250	ENDIF
3251	ENDDO
3252	ENDIF
3253
3254	!
3255	!-- Check again whether the levels determined this way are ok.
3256	!-- Error may occur at automatic determination and too few grid points in
3257	!-- z-direction.
3258	IF ( disturbance_level_ind_t < disturbance_level_ind_b ) THEN
3259	WRITE( message_string, * ) 'disturbance_level_ind_t = ', &
3260	disturbance_level_ind_t, ' must be >= disturbance_level_b = ', &
3261	disturbance_level_b
3262	CALL message( 'check_parameters', 'PA0130', 1, 2, 0, 6, 0 )
3263	ENDIF
3264
3265	!
3266	!-- Determine the horizontal index range for random perturbations.
3267	!-- In case of non-cyclic horizontal boundaries, no perturbations are imposed
3268	!-- near the inflow and the perturbation area is further limited to ...(1)
3269	!-- after the initial phase of the flow.
3270	dist_nxl = 0; dist_nxr = nx
3271	dist_nys = 0; dist_nyn = ny
3272	IF ( bc_lr /= 'cyclic' ) THEN
3273	IF ( inflow_disturbance_begin == -1 ) THEN
3274	inflow_disturbance_begin = MIN( 10, nx/2 )
3275	ENDIF
3276	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > nx )&
3277	THEN
3278	message_string = 'inflow_disturbance_begin out of range'
3279	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
3280	ENDIF
3281	IF ( inflow_disturbance_end == -1 ) THEN
3282	inflow_disturbance_end = MIN( 100, 3*nx/4 )
3283	ENDIF
3284	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > nx ) &
3285	THEN
3286	message_string = 'inflow_disturbance_end out of range'
3287	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
3288	ENDIF
3289	ELSEIF ( bc_ns /= 'cyclic' ) THEN
3290	IF ( inflow_disturbance_begin == -1 ) THEN
3291	inflow_disturbance_begin = MIN( 10, ny/2 )
3292	ENDIF
3293	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > ny )&
3294	THEN
3295	message_string = 'inflow_disturbance_begin out of range'
3296	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
3297	ENDIF
3298	IF ( inflow_disturbance_end == -1 ) THEN
3299	inflow_disturbance_end = MIN( 100, 3*ny/4 )
3300	ENDIF
3301	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > ny ) &
3302	THEN
3303	message_string = 'inflow_disturbance_end out of range'
3304	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
3305	ENDIF
3306	ENDIF
3307
3308	IF ( bc_lr == 'radiation/dirichlet' ) THEN
3309	dist_nxr = nx - inflow_disturbance_begin
3310	dist_nxl(1) = nx - inflow_disturbance_end
3311	ELSEIF ( bc_lr == 'dirichlet/radiation' ) THEN
3312	dist_nxl = inflow_disturbance_begin
3313	dist_nxr(1) = inflow_disturbance_end
3314	ENDIF
3315	IF ( bc_ns == 'dirichlet/radiation' ) THEN
3316	dist_nyn = ny - inflow_disturbance_begin
3317	dist_nys(1) = ny - inflow_disturbance_end
3318	ELSEIF ( bc_ns == 'radiation/dirichlet' ) THEN
3319	dist_nys = inflow_disturbance_begin
3320	dist_nyn(1) = inflow_disturbance_end
3321	ENDIF
3322
3323	!
3324	!-- A turbulent inflow requires Dirichlet conditions at the respective inflow
3325	!-- boundary (so far, a turbulent inflow is realized from the left side only)
3326	IF ( turbulent_inflow .AND. bc_lr /= 'dirichlet/radiation' ) THEN
3327	message_string = 'turbulent_inflow = .T. requires a Dirichlet ' // &
3328	'condition at the inflow boundary'
3329	CALL message( 'check_parameters', 'PA0133', 1, 2, 0, 6, 0 )
3330	ENDIF
3331
3332	!
3333	!-- Turbulent inflow requires that 3d arrays have been cyclically filled with
3334	!-- data from prerun in the first main run
3335	IF ( turbulent_inflow .AND. initializing_actions /= 'cyclic_fill' .AND. &
3336	initializing_actions /= 'read_restart_data' ) THEN
3337	message_string = 'turbulent_inflow = .T. requires ' // &
3338	'initializing_actions = ''cyclic_fill'' '
3339	CALL message( 'check_parameters', 'PA0055', 1, 2, 0, 6, 0 )
3340	ENDIF
3341
3342	!
3343	!-- In case of turbulent inflow calculate the index of the recycling plane
3344	IF ( turbulent_inflow ) THEN
3345	IF ( recycling_width == 9999999.9 ) THEN
3346	!
3347	!-- Set the default value for the width of the recycling domain
3348	recycling_width = 0.1 * nx * dx
3349	ELSE
3350	IF ( recycling_width < dx .OR. recycling_width > nx * dx ) THEN
3351	WRITE( message_string, * ) 'illegal value for recycling_width:', &
3352	' ', recycling_width
3353	CALL message( 'check_parameters', 'PA0134', 1, 2, 0, 6, 0 )
3354	ENDIF
3355	ENDIF
3356	!
3357	!-- Calculate the index
3358	recycling_plane = recycling_width / dx
3359	ENDIF
3360
3361	!
3362	!-- Check random generator
3363	IF ( random_generator /= 'system-specific' .AND. &
3364	random_generator /= 'numerical-recipes' ) THEN
3365	message_string = 'unknown random generator: random_generator = "' // &
3366	TRIM( random_generator ) // '"'
3367	CALL message( 'check_parameters', 'PA0135', 1, 2, 0, 6, 0 )
3368	ENDIF
3369
3370	!
3371	!-- Determine damping level index for 1D model
3372	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
3373	IF ( damp_level_1d == -1.0 ) THEN
3374	damp_level_1d = zu(nzt+1)
3375	damp_level_ind_1d = nzt + 1
3376	ELSEIF ( damp_level_1d < 0.0 .OR. damp_level_1d > zu(nzt+1) ) THEN
3377	WRITE( message_string, * ) 'damp_level_1d = ', damp_level_1d, &
3378	' must be > 0.0 and < ', zu(nzt+1), '(zu(nzt+1))'
3379	CALL message( 'check_parameters', 'PA0136', 1, 2, 0, 6, 0 )
3380	ELSE
3381	DO k = 1, nzt+1
3382	IF ( damp_level_1d <= zu(k) ) THEN
3383	damp_level_ind_1d = k
3384	EXIT
3385	ENDIF
3386	ENDDO
3387	ENDIF
3388	ENDIF
3389
3390	!
3391	!-- Check some other 1d-model parameters
3392	IF ( TRIM( mixing_length_1d ) /= 'as_in_3d_model' .AND. &
3393	TRIM( mixing_length_1d ) /= 'blackadar' ) THEN
3394	message_string = 'mixing_length_1d = "' // TRIM( mixing_length_1d ) // &
3395	'" is unknown'
3396	CALL message( 'check_parameters', 'PA0137', 1, 2, 0, 6, 0 )
3397	ENDIF
3398	IF ( TRIM( dissipation_1d ) /= 'as_in_3d_model' .AND. &
3399	TRIM( dissipation_1d ) /= 'detering' ) THEN
3400	message_string = 'dissipation_1d = "' // TRIM( dissipation_1d ) // &
3401	'" is unknown'
3402	CALL message( 'check_parameters', 'PA0138', 1, 2, 0, 6, 0 )
3403	ENDIF
3404
3405	!
3406	!-- Set time for the next user defined restart (time_restart is the
3407	!-- internal parameter for steering restart events)
3408	IF ( restart_time /= 9999999.9 ) THEN
3409	IF ( restart_time > time_since_reference_point ) THEN
3410	time_restart = restart_time
3411	ENDIF
3412	ELSE
3413	!
3414	!-- In case of a restart run, set internal parameter to default (no restart)
3415	!-- if the NAMELIST-parameter restart_time is omitted
3416	time_restart = 9999999.9
3417	ENDIF
3418
3419	!
3420	!-- Set default value of the time needed to terminate a model run
3421	IF ( termination_time_needed == -1.0 ) THEN
3422	IF ( host(1:3) == 'ibm' ) THEN
3423	termination_time_needed = 300.0
3424	ELSE
3425	termination_time_needed = 35.0
3426	ENDIF
3427	ENDIF
3428
3429	!
3430	!-- Check the time needed to terminate a model run
3431	IF ( host(1:3) == 't3e' ) THEN
3432	!
3433	!-- Time needed must be at least 30 seconds on all CRAY machines, because
3434	!-- MPP_TREMAIN gives the remaining CPU time only in steps of 30 seconds
3435	IF ( termination_time_needed <= 30.0 ) THEN
3436	WRITE( message_string, * ) 'termination_time_needed = ', &
3437	termination_time_needed, ' must be > 30.0 on host "', &
3438	TRIM( host ), '"'
3439	CALL message( 'check_parameters', 'PA0139', 1, 2, 0, 6, 0 )
3440	ENDIF
3441	ELSEIF ( host(1:3) == 'ibm' ) THEN
3442	!
3443	!-- On IBM-regatta machines the time should be at least 300 seconds,
3444	!-- because the job time consumed before executing palm (for compiling,
3445	!-- copying of files, etc.) has to be regarded
3446	IF ( termination_time_needed < 300.0 ) THEN
3447	WRITE( message_string, * ) 'termination_time_needed = ', &
3448	termination_time_needed, ' should be >= 300.0 on host "', &
3449	TRIM( host ), '"'
3450	CALL message( 'check_parameters', 'PA0140', 1, 2, 0, 6, 0 )
3451	ENDIF
3452	ENDIF
3453
3454	!
3455	!-- Check pressure gradient conditions
3456	IF ( dp_external .AND. conserve_volume_flow ) THEN
3457	WRITE( message_string, * ) 'Both dp_external and conserve_volume_flo', &
3458	'w are .TRUE. but one of them must be .FALSE.'
3459	CALL message( 'check_parameters', 'PA0150', 1, 2, 0, 6, 0 )
3460	ENDIF
3461	IF ( dp_external ) THEN
3462	IF ( dp_level_b < zu(nzb) .OR. dp_level_b > zu(nzt) ) THEN
3463	WRITE( message_string, * ) 'dp_level_b = ', dp_level_b, ' is out ', &
3464	' of range'
3465	CALL message( 'check_parameters', 'PA0151', 1, 2, 0, 6, 0 )
3466	ENDIF
3467	IF ( .NOT. ANY( dpdxy /= 0.0 ) ) THEN
3468	WRITE( message_string, * ) 'dp_external is .TRUE. but dpdxy is ze', &
3469	'ro, i.e. the external pressure gradient & will not be applied'
3470	CALL message( 'check_parameters', 'PA0152', 0, 1, 0, 6, 0 )
3471	ENDIF
3472	ENDIF
3473	IF ( ANY( dpdxy /= 0.0 ) .AND. .NOT. dp_external ) THEN
3474	WRITE( message_string, * ) 'dpdxy is nonzero but dp_external is ', &
3475	'.FALSE., i.e. the external pressure gradient & will not be applied'
3476	CALL message( 'check_parameters', 'PA0153', 0, 1, 0, 6, 0 )
3477	ENDIF
3478	IF ( conserve_volume_flow ) THEN
3479	IF ( TRIM( conserve_volume_flow_mode ) == 'default' ) THEN
3480
3481	conserve_volume_flow_mode = 'initial_profiles'
3482
3483	ELSEIF ( TRIM( conserve_volume_flow_mode ) /= 'initial_profiles' .AND. &
3484	TRIM( conserve_volume_flow_mode ) /= 'inflow_profile' .AND. &
3485	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) THEN
3486	WRITE( message_string, * ) 'unknown conserve_volume_flow_mode: ', &
3487	conserve_volume_flow_mode
3488	CALL message( 'check_parameters', 'PA0154', 1, 2, 0, 6, 0 )
3489	ENDIF
3490	IF ( (bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic') .AND. &
3491	TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
3492	WRITE( message_string, * ) 'non-cyclic boundary conditions ', &
3493	'require conserve_volume_flow_mode = ''initial_profiles'''
3494	CALL message( 'check_parameters', 'PA0155', 1, 2, 0, 6, 0 )
3495	ENDIF
3496	IF ( bc_lr == 'cyclic' .AND. bc_ns == 'cyclic' .AND. &
3497	TRIM( conserve_volume_flow_mode ) == 'inflow_profile' ) THEN
3498	WRITE( message_string, * ) 'cyclic boundary conditions ', &
3499	'require conserve_volume_flow_mode = ''initial_profiles''', &
3500	' or ''bulk_velocity'''
3501	CALL message( 'check_parameters', 'PA0156', 1, 2, 0, 6, 0 )
3502	ENDIF
3503	ENDIF
3504	IF ( ( u_bulk /= 0.0 .OR. v_bulk /= 0.0 ) .AND. &
3505	( .NOT. conserve_volume_flow .OR. &
3506	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) ) THEN
3507	WRITE( message_string, * ) 'nonzero bulk velocity requires ', &
3508	'conserve_volume_flow = .T. and ', &
3509	'conserve_volume_flow_mode = ''bulk_velocity'''
3510	CALL message( 'check_parameters', 'PA0157', 1, 2, 0, 6, 0 )
3511	ENDIF
3512
3513	!
3514	!-- Check particle attributes
3515	IF ( particle_color /= 'none' ) THEN
3516	IF ( particle_color /= 'absuv' .AND. particle_color /= 'pt*' .AND. &
3517	particle_color /= 'z' ) THEN
3518	message_string = 'illegal value for parameter particle_color: ' // &
3519	TRIM( particle_color)
3520	CALL message( 'check_parameters', 'PA0313', 1, 2, 0, 6, 0 )
3521	ELSE
3522	IF ( color_interval(2) <= color_interval(1) ) THEN
3523	message_string = 'color_interval(2) <= color_interval(1)'
3524	CALL message( 'check_parameters', 'PA0315', 1, 2, 0, 6, 0 )
3525	ENDIF
3526	ENDIF
3527	ENDIF
3528
3529	IF ( particle_dvrpsize /= 'none' ) THEN
3530	IF ( particle_dvrpsize /= 'absw' ) THEN
3531	message_string = 'illegal value for parameter particle_dvrpsize:' // &
3532	' ' // TRIM( particle_color)
3533	CALL message( 'check_parameters', 'PA0314', 1, 2, 0, 6, 0 )
3534	ELSE
3535	IF ( dvrpsize_interval(2) <= dvrpsize_interval(1) ) THEN
3536	message_string = 'dvrpsize_interval(2) <= dvrpsize_interval(1)'
3537	CALL message( 'check_parameters', 'PA0316', 1, 2, 0, 6, 0 )
3538	ENDIF
3539	ENDIF
3540	ENDIF
3541
3542	!
3543	!-- Check &userpar parameters
3544	CALL user_check_parameters
3545
3546
3547
3548	END SUBROUTINE check_parameters

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |