Home

Context Navigation

source: palm/trunk/SOURCE/check_parameters.f90 @ 771

Last change on this file since 771 was 771, checked in by heinze, 12 years ago
Output of liquid water potential temperature in case of cloud_physics=.T. enabled
Property svn:keywords set to `Id`
File size: 130.1 KB

Rev	Line
[1]	1	SUBROUTINE check_parameters
	2
	3	!------------------------------------------------------------------------------!
[484]	4	! Current revisions:
[1]	5	! -----------------
[771]	6	! +lpt
[667]	7	!
[668]	8	! Former revisions:
	9	! -----------------
[708]	10	! $Id: check_parameters.f90 771 2011-10-27 10:56:21Z heinze $
[687]	11	!
[768]	12	! 767 2011-10-14 06:39:12Z raasch
	13	! Calculating u,v-profiles from given profiles by linear interpolation.
	14	! bugfix: dirichlet_0 conditions for ug/vg moved from init_3d_model to here
	15	!
[708]	16	! 707 2011-03-29 11:39:40Z raasch
	17	! setting of bc_lr/ns_dirrad/raddir
	18	!
	19	! 689 2011-02-20 19:31:12z gryschka
[690]	20	! Bugfix for some logical expressions
	21	! (syntax was not compatible with all compilers)
[687]	22	!
[690]	23	! 680 2011-02-04 23:16:06Z gryschka
[681]	24	! init_vortex is not allowed with volume_flow_control
[668]	25	!
[674]	26	! 673 2011-01-18 16:19:48Z suehring
	27	! Declaration of ws_scheme_sca and ws_scheme_mom added (moved from advec_ws).
	28	!
[668]	29	! 667 2010-12-23 12:06:00Z suehring/gryschka
[667]	30	! Exchange of parameters between ocean and atmosphere via PE0
	31	! Check for illegal combination of ws-scheme and timestep scheme.
	32	! Check for topography and ws-scheme.
	33	! Check for not cyclic boundary conditions in combination with ws-scheme and
	34	! loop_optimization = 'vector'.
	35	! Check for call_psolver_at_all_substeps and ws-scheme for momentum_advec.
	36	! Different processor/grid topology in atmosphere and ocean is now allowed!
	37	! Bugfixes in checking for conserve_volume_flow_mode
[601]	38	! 600 2010-11-24 16:10:51Z raasch
	39	! change due to new default value of surface_waterflux
[581]	40	! 580 2010-10-05 13:59:11Z heinze
[601]	41	! renaming of ws_vertical_gradient_level to subs_vertical_gradient_level
[581]	42	!
[568]	43	! 567 2010-10-01 10:46:30Z helmke
	44	! calculating masks changed
	45	!
[565]	46	! 564 2010-09-30 13:18:59Z helmke
	47	! palm message identifiers of masked output changed, 20 replaced by max_masks
	48	!
[554]	49	! 553 2010-09-01 14:09:06Z weinreis
	50	! masks is calculated and removed from inipar
[532]	51	!
	52	! 531 2010-04-21 06:47:21Z heinze
	53	! Bugfix: unit of hyp changed to dbar
[392]	54	!
[525]	55	! 524 2010-03-30 02:04:51Z raasch
	56	! Bugfix: "/" in netcdf profile variable names replaced by ":"
	57	!
[494]	58	! 493 2010-03-01 08:30:24Z raasch
	59	! netcdf_data_format is checked
	60	!
[449]	61	! 411 2009-12-11 14:15:58Z heinze
	62	! Enabled passive scalar/humidity wall fluxes for non-flat topography
	63	! Initialization of large scale vertical motion (subsidence/ascent)
	64	!
	65	! 410 2009-12-04 17:05:40Z letzel
	66	! masked data output
	67	!
[392]	68	! 388 2009-09-23 09:40:33Z raasch
[388]	69	! Check profiles fpr prho and hyp.
[376]	70	! Bugfix: output of averaged 2d/3d quantities requires that an avaraging
	71	! interval has been set, respective error message is included
[366]	72	! bc_lr_cyc and bc_ns_cyc are set,
[328]	73	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
[308]	74	! Check for illegal entries in section_xy\|xz\|yz that exceed nz+1\|ny+1\|nx+1
[291]	75	! Coupling with independent precursor runs.
[264]	76	! Check particle_color, particle_dvrpsize, color_interval, dvrpsize_interval
[232]	77	! Bugfix: pressure included for profile output
[240]	78	! Check pressure gradient conditions
[256]	79	! topography_grid_convention moved from user_check_parameters
	80	! 'single_street_canyon'
[367]	81	! Added shf* and qsws* to the list of available output data
[226]	82	!
	83	! 222 2009-01-12 16:04:16Z letzel
[217]	84	! +user_check_parameters
[213]	85	! Output of messages replaced by message handling routine.
[206]	86	! Implementation of an MPI-1 coupling: replaced myid with target_id,
	87	! deleted __mpi2 directives
[222]	88	! Check that PALM is called with mrun -K parallel for coupling
[198]	89	!
	90	! 197 2008-09-16 15:29:03Z raasch
[177]	91	! Bug fix: Construction of vertical profiles when 10 gradients have been
[181]	92	! specified in the parameter list (ug, vg, pt, q, sa, lad)
	93	!
	94	! Strict grid matching along z is not needed for mg-solver.
[153]	95	! Leaf area density (LAD) explicitly set to its surface value at k=0
[151]	96	! Case of reading data for recycling included in initializing_actions,
[197]	97	! check of turbulent_inflow and calculation of recycling_plane.
	98	! q*2 profile added
[139]	99	!
	100	! 138 2007-11-28 10:03:58Z letzel
[138]	101	! Plant canopy added
[132]	102	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
[116]	103	! Multigrid solver allows topography, checking of dt_sort_particles
[121]	104	! Bugfix: initializing u_init and v_init in case of ocean runs
[110]	105	!
	106	! 109 2007-08-28 15:26:47Z letzel
[102]	107	! Check coupling_mode and set default (obligatory) values (like boundary
[106]	108	! conditions for temperature and fluxes) in case of coupled runs.
	109	! +profiles for wp and w"e
[104]	110	! Bugfix: Error message concerning output of particle concentration (pc)
	111	! modified
[108]	112	! More checks and more default values for coupled runs
	113	! allow data_output_pr= q, wq, w"q", wq for humidity = .T. (instead of
	114	! cloud_physics = .T.)
	115	! Rayleigh damping for ocean fixed.
[109]	116	! Check and, if necessary, set default value for dt_coupling
[98]	117	!
	118	! 97 2007-06-21 08:23:15Z raasch
[97]	119	! Initial salinity profile is calculated, salinity boundary conditions are
	120	! checked,
[94]	121	! z_max_do1d is checked only in case of ocean = .f.,
[97]	122	! +initial temperature and geostrophic velocity profiles for the ocean version,
	123	! use_pt_reference renamed use_reference
[77]	124	!
[90]	125	! 89 2007-05-25 12:08:31Z raasch
	126	! Check for user-defined profiles
	127	!
[77]	128	! 75 2007-03-22 09:54:05Z raasch
[51]	129	! "by_user" allowed as initializing action, -data_output_ts,
[63]	130	! leapfrog with non-flat topography not allowed any more, loop_optimization
[75]	131	! and pt_reference are checked, moisture renamed humidity,
[72]	132	! output of precipitation amount/rate and roughnes length + check
[73]	133	! possible negative humidities are avoided in initial profile,
[75]	134	! dirichlet/neumann changed to dirichlet/radiation, etc.,
	135	! revision added to run_description_header
[1]	136	!
[39]	137	! 20 2007-02-26 00:12:32Z raasch
	138	! Temperature and humidity gradients at top are now calculated for nzt+1,
	139	! top_heatflux and respective boundary condition bc_pt_t is checked
	140	!
[3]	141	! RCS Log replace by Id keyword, revision history cleaned up
	142	!
[1]	143	! Revision 1.61 2006/08/04 14:20:25 raasch
	144	! do2d_unit and do3d_unit now defined as 2d-arrays, check of
	145	! use_upstream_for_tke, default value for dt_dopts,
	146	! generation of file header moved from routines palm and header to here
	147	!
	148	! Revision 1.1 1997/08/26 06:29:23 raasch
	149	! Initial revision
	150	!
	151	!
	152	! Description:
	153	! ------------
	154	! Check control parameters and deduce further quantities.
	155	!------------------------------------------------------------------------------!
	156
	157	USE arrays_3d
	158	USE constants
	159	USE control_parameters
[264]	160	USE dvrp_variables
[1]	161	USE grid_variables
	162	USE indices
	163	USE model_1d
	164	USE netcdf_control
	165	USE particle_attributes
	166	USE pegrid
	167	USE profil_parameter
[411]	168	USE subsidence_mod
[1]	169	USE statistics
	170	USE transpose_indices
	171
	172	IMPLICIT NONE
	173
	174	CHARACTER (LEN=1) :: sq
	175	CHARACTER (LEN=6) :: var
	176	CHARACTER (LEN=7) :: unit
	177	CHARACTER (LEN=8) :: date
	178	CHARACTER (LEN=10) :: time
[102]	179	CHARACTER (LEN=40) :: coupling_string
[1]	180	CHARACTER (LEN=100) :: action
	181
[767]	182	INTEGER :: i, ilen, intervals, iremote = 0, iter, j, k, kk, nnxh, nnyh, &
	183	position, prec
[1]	184	LOGICAL :: found, ldum
[291]	185	REAL :: gradient, maxn, maxp, remote = 0.0, &
	186	simulation_time_since_reference
[1]	187
	188	!
	189	!-- Warning, if host is not set
	190	IF ( host(1:1) == ' ' ) THEN
[213]	191	message_string = '"host" is not set. Please check that environment ' // &
	192	'variable "localhost" & is set before running PALM'
[226]	193	CALL message( 'check_parameters', 'PA0001', 0, 0, 0, 6, 0 )
[1]	194	ENDIF
	195
	196	!
[102]	197	!-- Check the coupling mode
	198	IF ( coupling_mode /= 'uncoupled' .AND. &
	199	coupling_mode /= 'atmosphere_to_ocean' .AND. &
	200	coupling_mode /= 'ocean_to_atmosphere' ) THEN
[213]	201	message_string = 'illegal coupling mode: ' // TRIM( coupling_mode )
[226]	202	CALL message( 'check_parameters', 'PA0002', 1, 2, 0, 6, 0 )
[102]	203	ENDIF
	204
	205	!
[108]	206	!-- Check dt_coupling, restart_time, dt_restart, end_time, dx, dy, nx and ny
[667]	207	IF ( coupling_mode /= 'uncoupled') THEN
[213]	208
[108]	209	IF ( dt_coupling == 9999999.9 ) THEN
[213]	210	message_string = 'dt_coupling is not set but required for coup' // &
	211	'ling mode "' // TRIM( coupling_mode ) // '"'
[226]	212	CALL message( 'check_parameters', 'PA0003', 1, 2, 0, 6, 0 )
[108]	213	ENDIF
[213]	214
[206]	215	#if defined( __parallel )
[667]	216	IF ( myid == 0 ) THEN
	217	CALL MPI_SEND( dt_coupling, 1, MPI_REAL, target_id, 11, comm_inter, &
	218	ierr )
	219	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 11, comm_inter, &
	220	status, ierr )
	221	ENDIF
	222	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
	223
[108]	224	IF ( dt_coupling /= remote ) THEN
[213]	225	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	226	'": dt_coupling = ', dt_coupling, '& is not equal to ', &
	227	'dt_coupling_remote = ', remote
[226]	228	CALL message( 'check_parameters', 'PA0004', 1, 2, 0, 6, 0 )
[108]	229	ENDIF
[109]	230	IF ( dt_coupling <= 0.0 ) THEN
[667]	231	IF ( myid == 0 ) THEN
	232	CALL MPI_SEND( dt_max, 1, MPI_REAL, target_id, 19, comm_inter, ierr )
	233	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 19, comm_inter, &
	234	status, ierr )
	235	ENDIF
	236	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
	237
[109]	238	dt_coupling = MAX( dt_max, remote )
[213]	239	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	240	'": dt_coupling <= 0.0 & is not allowed and is reset to ', &
	241	'MAX(dt_max(A,O)) = ', dt_coupling
[226]	242	CALL message( 'check_parameters', 'PA0005', 0, 1, 0, 6, 0 )
[109]	243	ENDIF
[667]	244	IF ( myid == 0 ) THEN
	245	CALL MPI_SEND( restart_time, 1, MPI_REAL, target_id, 12, comm_inter, &
	246	ierr )
	247	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 12, comm_inter, &
	248	status, ierr )
	249	ENDIF
	250	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
	251
[108]	252	IF ( restart_time /= remote ) THEN
[213]	253	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	254	'": restart_time = ', restart_time, '& is not equal to ', &
	255	'restart_time_remote = ', remote
[226]	256	CALL message( 'check_parameters', 'PA0006', 1, 2, 0, 6, 0 )
[108]	257	ENDIF
[667]	258	IF ( myid == 0 ) THEN
	259	CALL MPI_SEND( dt_restart, 1, MPI_REAL, target_id, 13, comm_inter, &
	260	ierr )
	261	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 13, comm_inter, &
	262	status, ierr )
	263	ENDIF
	264	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
	265
[108]	266	IF ( dt_restart /= remote ) THEN
[213]	267	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	268	'": dt_restart = ', dt_restart, '& is not equal to ', &
	269	'dt_restart_remote = ', remote
[226]	270	CALL message( 'check_parameters', 'PA0007', 1, 2, 0, 6, 0 )
[108]	271	ENDIF
[213]	272
[291]	273	simulation_time_since_reference = end_time - coupling_start_time
[667]	274	IF ( myid == 0 ) THEN
	275	CALL MPI_SEND( simulation_time_since_reference, 1, MPI_REAL, target_id, &
	276	14, comm_inter, ierr )
	277	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 14, comm_inter, &
	278	status, ierr )
	279	ENDIF
	280	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
	281
[291]	282	IF ( simulation_time_since_reference /= remote ) THEN
[213]	283	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
[291]	284	'": simulation_time_since_reference = ', &
	285	simulation_time_since_reference, '& is not equal to ', &
	286	'simulation_time_since_reference_remote = ', remote
[226]	287	CALL message( 'check_parameters', 'PA0008', 1, 2, 0, 6, 0 )
[108]	288	ENDIF
[213]	289
[667]	290
	291	IF ( myid == 0 ) THEN
	292	CALL MPI_SEND( dx, 1, MPI_REAL, target_id, 15, comm_inter, ierr )
	293	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 15, comm_inter, &
	294	status, ierr )
[108]	295	ENDIF
[667]	296	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[213]	297
[667]	298
	299	IF ( coupling_mode == 'atmosphere_to_ocean') THEN
	300
	301	IF ( dx < remote ) THEN
	302	WRITE( message_string, * ) 'coupling mode "', &
	303	TRIM( coupling_mode ), &
	304	'": dx in Atmosphere is not equal to or not larger then dx in ocean'
	305	CALL message( 'check_parameters', 'PA0009', 1, 2, 0, 6, 0 )
	306	ENDIF
	307
	308	IF ( (nx_a+1)dx /= (nx_o+1)remote ) THEN
	309	WRITE( message_string, * ) 'coupling mode "', &
	310	TRIM( coupling_mode ), &
	311	'": Domain size in x-direction is not equal in ocean and atmosphere'
	312	CALL message( 'check_parameters', 'PA0010', 1, 2, 0, 6, 0 )
	313	ENDIF
	314
[108]	315	ENDIF
[213]	316
[667]	317	IF ( myid == 0) THEN
	318	CALL MPI_SEND( dy, 1, MPI_REAL, target_id, 16, comm_inter, ierr )
	319	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 16, comm_inter, &
	320	status, ierr )
[108]	321	ENDIF
[667]	322	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[213]	323
[667]	324	IF ( coupling_mode == 'atmosphere_to_ocean') THEN
	325
	326	IF ( dy < remote ) THEN
	327	WRITE( message_string, * ) 'coupling mode "', &
	328	TRIM( coupling_mode ), &
	329	'": dy in Atmosphere is not equal to or not larger then dy in ocean'
	330	CALL message( 'check_parameters', 'PA0011', 1, 2, 0, 6, 0 )
	331	ENDIF
	332
	333	IF ( (ny_a+1)dy /= (ny_o+1)remote ) THEN
	334	WRITE( message_string, * ) 'coupling mode "', &
	335	TRIM( coupling_mode ), &
	336	'": Domain size in y-direction is not equal in ocean and atmosphere'
	337	CALL message( 'check_parameters', 'PA0012', 1, 2, 0, 6, 0 )
	338	ENDIF
	339
	340	IF ( MOD(nx_o+1,nx_a+1) /= 0 ) THEN
	341	WRITE( message_string, * ) 'coupling mode "', &
	342	TRIM( coupling_mode ), &
	343	'": nx+1 in ocean is not divisible without remainder with nx+1 in', &
	344	' atmosphere'
	345	CALL message( 'check_parameters', 'PA0339', 1, 2, 0, 6, 0 )
	346	ENDIF
	347
	348	IF ( MOD(ny_o+1,ny_a+1) /= 0 ) THEN
	349	WRITE( message_string, * ) 'coupling mode "', &
	350	TRIM( coupling_mode ), &
	351	'": ny+1 in ocean is not divisible without remainder with ny+1 in', &
	352	' atmosphere'
	353	CALL message( 'check_parameters', 'PA0340', 1, 2, 0, 6, 0 )
	354	ENDIF
	355
[108]	356	ENDIF
[222]	357	#else
	358	WRITE( message_string, * ) 'coupling requires PALM to be called with', &
	359	' ''mrun -K parallel'''
[226]	360	CALL message( 'check_parameters', 'PA0141', 1, 2, 0, 6, 0 )
[108]	361	#endif
	362	ENDIF
	363
[206]	364	#if defined( __parallel )
[108]	365	!
	366	!-- Exchange via intercommunicator
[667]	367	IF ( coupling_mode == 'atmosphere_to_ocean' .AND. myid == 0 ) THEN
[206]	368	CALL MPI_SEND( humidity, 1, MPI_LOGICAL, target_id, 19, comm_inter, &
	369	ierr )
[667]	370	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' .AND. myid == 0) THEN
[206]	371	CALL MPI_RECV( humidity_remote, 1, MPI_LOGICAL, target_id, 19, &
	372	comm_inter, status, ierr )
[108]	373	ENDIF
[667]	374	CALL MPI_BCAST( humidity_remote, 1, MPI_LOGICAL, 0, comm2d, ierr)
	375
[108]	376	#endif
	377
	378
	379	!
[1]	380	!-- Generate the file header which is used as a header for most of PALM's
	381	!-- output files
	382	CALL DATE_AND_TIME( date, time )
	383	run_date = date(7:8)//'-'//date(5:6)//'-'//date(3:4)
	384	run_time = time(1:2)//':'//time(3:4)//':'//time(5:6)
[102]	385	IF ( coupling_mode == 'uncoupled' ) THEN
	386	coupling_string = ''
	387	ELSEIF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
	388	coupling_string = ' coupled (atmosphere)'
	389	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	390	coupling_string = ' coupled (ocean)'
	391	ENDIF
[1]	392
[102]	393	WRITE ( run_description_header, &
	394	'(A,2X,A,2X,A,A,A,I2.2,A,2X,A,A,2X,A,1X,A)' ) &
	395	TRIM( version ), TRIM( revision ), 'run: ', &
	396	TRIM( run_identifier ), '.', runnr, TRIM( coupling_string ), &
	397	'host: ', TRIM( host ), run_date, run_time
[1]	398
	399	!
[63]	400	!-- Check the general loop optimization method
	401	IF ( loop_optimization == 'default' ) THEN
	402	IF ( host(1:3) == 'nec' ) THEN
	403	loop_optimization = 'vector'
	404	ELSE
	405	loop_optimization = 'cache'
	406	ENDIF
	407	ENDIF
	408	IF ( loop_optimization /= 'noopt' .AND. loop_optimization /= 'cache' &
	409	.AND. loop_optimization /= 'vector' ) THEN
[213]	410	message_string = 'illegal value given for loop_optimization: "' // &
	411	TRIM( loop_optimization ) // '"'
[226]	412	CALL message( 'check_parameters', 'PA0013', 1, 2, 0, 6, 0 )
[63]	413	ENDIF
	414
	415	!
[1]	416	!-- Check topography setting (check for illegal parameter combinations)
	417	IF ( topography /= 'flat' ) THEN
	418	action = ' '
	419	IF ( scalar_advec /= 'pw-scheme' ) THEN
	420	WRITE( action, '(A,A)' ) 'scalar_advec = ', scalar_advec
	421	ENDIF
	422	IF ( momentum_advec /= 'pw-scheme' ) THEN
	423	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
	424	ENDIF
[51]	425	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
	426	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
	427	ENDIF
[114]	428	IF ( psolver == 'sor' ) THEN
[1]	429	WRITE( action, '(A,A)' ) 'psolver = ', psolver
	430	ENDIF
	431	IF ( sloping_surface ) THEN
	432	WRITE( action, '(A)' ) 'sloping surface = .TRUE.'
	433	ENDIF
	434	IF ( galilei_transformation ) THEN
	435	WRITE( action, '(A)' ) 'galilei_transformation = .TRUE.'
	436	ENDIF
	437	IF ( cloud_physics ) THEN
	438	WRITE( action, '(A)' ) 'cloud_physics = .TRUE.'
	439	ENDIF
	440	IF ( cloud_droplets ) THEN
	441	WRITE( action, '(A)' ) 'cloud_droplets = .TRUE.'
	442	ENDIF
	443	IF ( .NOT. prandtl_layer ) THEN
	444	WRITE( action, '(A)' ) 'prandtl_layer = .FALSE.'
	445	ENDIF
	446	IF ( action /= ' ' ) THEN
[213]	447	message_string = 'a non-flat topography does not allow ' // &
	448	TRIM( action )
[226]	449	CALL message( 'check_parameters', 'PA0014', 1, 2, 0, 6, 0 )
[1]	450	ENDIF
[667]	451	IF ( momentum_advec == 'ws-scheme' .OR. scalar_advec == 'ws-scheme' ) &
	452	THEN
	453	message_string = 'topography is still not allowed with ' // &
	454	'momentum_advec = "' // TRIM( momentum_advec ) // &
	455	'"or scalar_advec = "' // TRIM( scalar_advec ) //'"'
	456	! message number still needs modification
	457	CALL message( 'check_parameters', 'PA0341', 1, 2, 0, 6, 0 )
	458	END IF
	459
[256]	460	!
	461	!-- In case of non-flat topography, check whether the convention how to
	462	!-- define the topography grid has been set correctly, or whether the default
	463	!-- is applicable. If this is not possible, abort.
	464	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
	465	IF ( TRIM( topography ) /= 'single_building' .AND. &
	466	TRIM( topography ) /= 'single_street_canyon' .AND. &
	467	TRIM( topography ) /= 'read_from_file' ) THEN
	468	!-- The default value is not applicable here, because it is only valid
	469	!-- for the two standard cases 'single_building' and 'read_from_file'
	470	!-- defined in init_grid.
	471	WRITE( message_string, * ) &
	472	'The value for "topography_grid_convention" ', &
	473	'is not set. Its default value is & only valid for ', &
	474	'"topography" = ''single_building'', ', &
	475	'''single_street_canyon'' & or ''read_from_file''.', &
	476	' & Choose ''cell_edge'' or ''cell_center''.'
	477	CALL message( 'user_check_parameters', 'PA0239', 1, 2, 0, 6, 0 )
	478	ELSE
	479	!-- The default value is applicable here.
	480	!-- Set convention according to topography.
	481	IF ( TRIM( topography ) == 'single_building' .OR. &
	482	TRIM( topography ) == 'single_street_canyon' ) THEN
	483	topography_grid_convention = 'cell_edge'
	484	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
	485	topography_grid_convention = 'cell_center'
	486	ENDIF
	487	ENDIF
	488	ELSEIF ( TRIM( topography_grid_convention ) /= 'cell_edge' .AND. &
	489	TRIM( topography_grid_convention ) /= 'cell_center' ) THEN
	490	WRITE( message_string, * ) &
	491	'The value for "topography_grid_convention" is ', &
	492	'not recognized. & Choose ''cell_edge'' or ''cell_center''.'
	493	CALL message( 'user_check_parameters', 'PA0240', 1, 2, 0, 6, 0 )
	494	ENDIF
	495
[1]	496	ENDIF
[94]	497
[1]	498	!
[94]	499	!-- Check ocean setting
	500	IF ( ocean ) THEN
[332]	501
[94]	502	action = ' '
	503	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
	504	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
	505	ENDIF
[97]	506	IF ( momentum_advec == 'ups-scheme' ) THEN
	507	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
	508	ENDIF
[94]	509	IF ( action /= ' ' ) THEN
[213]	510	message_string = 'ocean = .T. does not allow ' // TRIM( action )
[226]	511	CALL message( 'check_parameters', 'PA0015', 1, 2, 0, 6, 0 )
[94]	512	ENDIF
	513
[332]	514	ELSEIF ( TRIM( coupling_mode ) == 'uncoupled' .AND. &
	515	TRIM( coupling_char ) == '_O' ) THEN
[343]	516
[94]	517	!
[332]	518	!-- Check whether an (uncoupled) atmospheric run has been declared as an
	519	!-- ocean run (this setting is done via mrun-option -y)
[343]	520
[291]	521	message_string = 'ocean = .F. does not allow coupling_char = "' // &
	522	TRIM( coupling_char ) // '" set by mrun-option "-y"'
	523	CALL message( 'check_parameters', 'PA0317', 1, 2, 0, 6, 0 )
[332]	524
[291]	525	ENDIF
	526
	527	!
[1]	528	!-- Check whether there are any illegal values
	529	!-- Pressure solver:
	530	IF ( psolver /= 'poisfft' .AND. psolver /= 'poisfft_hybrid' .AND. &
	531	psolver /= 'sor' .AND. psolver /= 'multigrid' ) THEN
[213]	532	message_string = 'unknown solver for perturbation pressure: psolver' // &
	533	' = "' // TRIM( psolver ) // '"'
[226]	534	CALL message( 'check_parameters', 'PA0016', 1, 2, 0, 6, 0 )
[1]	535	ENDIF
	536
	537	#if defined( __parallel )
	538	IF ( psolver == 'poisfft_hybrid' .AND. pdims(2) /= 1 ) THEN
[213]	539	message_string = 'psolver = "' // TRIM( psolver ) // '" only works ' // &
	540	'for a 1d domain-decomposition along x & please do' // &
	541	' not set npey/=1 in the parameter file'
[226]	542	CALL message( 'check_parameters', 'PA0017', 1, 2, 0, 6, 0 )
[1]	543	ENDIF
[181]	544	IF ( psolver == 'poisfft_hybrid' .AND. &
	545	( nxra > nxr .OR. nyna > nyn .OR. nza > nz ) .OR. &
	546	psolver == 'multigrid' .AND. &
	547	( nxra > nxr .OR. nyna > nyn ) ) THEN
[213]	548	message_string = 'psolver = "' // TRIM( psolver ) // '" does not ' // &
	549	'work for subdomains with unequal size & please ' // &
	550	'set grid_matching = ''strict'' in the parameter file'
[226]	551	CALL message( 'check_parameters', 'PA0018', 1, 2, 0, 6, 0 )
[1]	552	ENDIF
	553	#else
	554	IF ( psolver == 'poisfft_hybrid' ) THEN
[213]	555	message_string = 'psolver = "' // TRIM( psolver ) // '" only works' // &
	556	' for a parallel environment'
[226]	557	CALL message( 'check_parameters', 'PA0019', 1, 2, 0, 6, 0 )
[1]	558	ENDIF
	559	#endif
	560
	561	IF ( psolver == 'multigrid' ) THEN
	562	IF ( cycle_mg == 'w' ) THEN
	563	gamma_mg = 2
	564	ELSEIF ( cycle_mg == 'v' ) THEN
	565	gamma_mg = 1
	566	ELSE
[213]	567	message_string = 'unknown multigrid cycle: cycle_mg = "' // &
	568	TRIM( cycle_mg ) // '"'
[226]	569	CALL message( 'check_parameters', 'PA0020', 1, 2, 0, 6, 0 )
[1]	570	ENDIF
	571	ENDIF
	572
	573	IF ( fft_method /= 'singleton-algorithm' .AND. &
	574	fft_method /= 'temperton-algorithm' .AND. &
	575	fft_method /= 'system-specific' ) THEN
[213]	576	message_string = 'unknown fft-algorithm: fft_method = "' // &
	577	TRIM( fft_method ) // '"'
[226]	578	CALL message( 'check_parameters', 'PA0021', 1, 2, 0, 6, 0 )
[1]	579	ENDIF
[667]	580
	581	IF( momentum_advec == 'ws-scheme' .AND. &
[688]	582	.NOT. call_psolver_at_all_substeps ) THEN
[667]	583	message_string = 'psolver must be called at each RK3 substep when "'//&
	584	TRIM(momentum_advec) // ' "is used for momentum_advec'
[685]	585	CALL message( 'check_parameters', 'PA0344', 1, 2, 0, 6, 0 )
[667]	586	END IF
[1]	587	!
	588	!-- Advection schemes:
[673]	589	!
	590	!-- Set the LOGICALS to enhance the performance.
	591	IF ( momentum_advec == 'ws-scheme' ) ws_scheme_mom = .TRUE.
	592	IF ( scalar_advec == 'ws-scheme' ) ws_scheme_sca = .TRUE.
	593
[667]	594	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme' .AND. &
	595	momentum_advec /= 'ups-scheme' ) THEN
[214]	596	message_string = 'unknown advection scheme: momentum_advec = "' // &
	597	TRIM( momentum_advec ) // '"'
[226]	598	CALL message( 'check_parameters', 'PA0022', 1, 2, 0, 6, 0 )
[1]	599	ENDIF
[667]	600	IF ((( momentum_advec == 'ups-scheme' .OR. scalar_advec == 'ups-scheme' )&
	601	.AND. timestep_scheme /= 'euler' ) .OR. (( momentum_advec == 'ws-scheme'&
	602	.OR. scalar_advec == 'ws-scheme') .AND. (timestep_scheme == 'euler' .OR. &
	603	timestep_scheme == 'leapfrog+euler' .OR. timestep_scheme == 'leapfrog' &
	604	.OR. timestep_scheme == 'runge-kutta-2'))) THEN
	605	message_string = 'momentum_advec or scalar_advec = "' &
	606	// TRIM( momentum_advec ) // '" is not allowed with timestep_scheme = "' // &
	607	TRIM( timestep_scheme ) // '"'
[226]	608	CALL message( 'check_parameters', 'PA0023', 1, 2, 0, 6, 0 )
[1]	609	ENDIF
[667]	610	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'ws-scheme' .AND. &
	611	scalar_advec /= 'bc-scheme' .AND. scalar_advec /= 'ups-scheme' ) THEN
[214]	612	message_string = 'unknown advection scheme: scalar_advec = "' // &
	613	TRIM( scalar_advec ) // '"'
[226]	614	CALL message( 'check_parameters', 'PA0024', 1, 2, 0, 6, 0 )
[1]	615	ENDIF
	616
	617	IF ( use_sgs_for_particles .AND. .NOT. use_upstream_for_tke ) THEN
	618	use_upstream_for_tke = .TRUE.
[214]	619	message_string = 'use_upstream_for_tke set .TRUE. because ' // &
	620	'use_sgs_for_particles = .TRUE.'
[226]	621	CALL message( 'check_parameters', 'PA0025', 0, 1, 0, 6, 0 )
[1]	622	ENDIF
	623
	624	IF ( use_upstream_for_tke .AND. timestep_scheme(1:8) == 'leapfrog' ) THEN
[214]	625	message_string = 'use_upstream_for_tke = .TRUE. not allowed with ' // &
	626	'timestep_scheme = "' // TRIM( timestep_scheme ) // '"'
[226]	627	CALL message( 'check_parameters', 'PA0026', 1, 2, 0, 6, 0 )
[1]	628	ENDIF
	629
	630	!
	631	!-- Timestep schemes:
	632	SELECT CASE ( TRIM( timestep_scheme ) )
	633
	634	CASE ( 'euler' )
	635	intermediate_timestep_count_max = 1
	636	asselin_filter_factor = 0.0
	637
	638	CASE ( 'leapfrog', 'leapfrog+euler' )
	639	intermediate_timestep_count_max = 1
	640
	641	CASE ( 'runge-kutta-2' )
	642	intermediate_timestep_count_max = 2
	643	asselin_filter_factor = 0.0
	644
	645	CASE ( 'runge-kutta-3' )
	646	intermediate_timestep_count_max = 3
	647	asselin_filter_factor = 0.0
	648
	649	CASE DEFAULT
[214]	650	message_string = 'unknown timestep scheme: timestep_scheme = "' // &
	651	TRIM( timestep_scheme ) // '"'
[226]	652	CALL message( 'check_parameters', 'PA0027', 1, 2, 0, 6, 0 )
[1]	653
	654	END SELECT
	655
[63]	656	IF ( scalar_advec == 'ups-scheme' .AND. timestep_scheme(1:5) == 'runge' )&
[1]	657	THEN
[214]	658	message_string = 'scalar advection scheme "' // TRIM( scalar_advec ) // &
	659	'" & does not work with timestep_scheme "' // &
	660	TRIM( timestep_scheme ) // '"'
[226]	661	CALL message( 'check_parameters', 'PA0028', 1, 2, 0, 6, 0 )
[1]	662	ENDIF
	663
[667]	664	IF ( (momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme') &
	665	.AND. timestep_scheme(1:5) == 'runge' ) THEN
[214]	666	message_string = 'momentum advection scheme "' // &
	667	TRIM( momentum_advec ) // '" & does not work with ' // &
	668	'timestep_scheme "' // TRIM( timestep_scheme ) // '"'
[226]	669	CALL message( 'check_parameters', 'PA0029', 1, 2, 0, 6, 0 )
[1]	670	ENDIF
	671
[147]	672	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
[328]	673	TRIM( initializing_actions ) /= 'cyclic_fill' ) THEN
[1]	674	!
[214]	675	!-- No restart run: several initialising actions are possible
[1]	676	action = initializing_actions
	677	DO WHILE ( TRIM( action ) /= '' )
	678	position = INDEX( action, ' ' )
	679	SELECT CASE ( action(1:position-1) )
	680
	681	CASE ( 'set_constant_profiles', 'set_1d-model_profiles', &
[46]	682	'by_user', 'initialize_vortex', 'initialize_ptanom' )
[1]	683	action = action(position+1:)
	684
	685	CASE DEFAULT
[214]	686	message_string = 'initializing_action = "' // &
	687	TRIM( action ) // '" unkown or not allowed'
[226]	688	CALL message( 'check_parameters', 'PA0030', 1, 2, 0, 6, 0 )
[1]	689
	690	END SELECT
	691	ENDDO
	692	ENDIF
[214]	693
[680]	694	IF ( TRIM( initializing_actions ) == 'initialize_vortex' .AND. &
	695	conserve_volume_flow ) THEN
	696	message_string = 'initializing_actions = "initialize_vortex"' // &
	697	' ist not allowed with conserve_volume_flow = .T.'
	698	CALL message( 'check_parameters', 'PA0343', 1, 2, 0, 6, 0 )
	699	ENDIF
	700
	701
[1]	702	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
	703	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[214]	704	message_string = 'initializing_actions = "set_constant_profiles"' // &
	705	' and "set_1d-model_profiles" are not allowed ' // &
	706	'simultaneously'
[226]	707	CALL message( 'check_parameters', 'PA0031', 1, 2, 0, 6, 0 )
[1]	708	ENDIF
[214]	709
[46]	710	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
	711	INDEX( initializing_actions, 'by_user' ) /= 0 ) THEN
[214]	712	message_string = 'initializing_actions = "set_constant_profiles"' // &
	713	' and "by_user" are not allowed simultaneously'
[226]	714	CALL message( 'check_parameters', 'PA0032', 1, 2, 0, 6, 0 )
[46]	715	ENDIF
[214]	716
[46]	717	IF ( INDEX( initializing_actions, 'by_user' ) /= 0 .AND. &
	718	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[214]	719	message_string = 'initializing_actions = "by_user" and ' // &
	720	'"set_1d-model_profiles" are not allowed simultaneously'
[226]	721	CALL message( 'check_parameters', 'PA0033', 1, 2, 0, 6, 0 )
[46]	722	ENDIF
[1]	723
[75]	724	IF ( cloud_physics .AND. .NOT. humidity ) THEN
[214]	725	WRITE( message_string, * ) 'cloud_physics = ', cloud_physics, ' is ', &
	726	'not allowed with humidity = ', humidity
[226]	727	CALL message( 'check_parameters', 'PA0034', 1, 2, 0, 6, 0 )
[1]	728	ENDIF
	729
[72]	730	IF ( precipitation .AND. .NOT. cloud_physics ) THEN
[214]	731	WRITE( message_string, * ) 'precipitation = ', precipitation, ' is ', &
	732	'not allowed with cloud_physics = ', cloud_physics
[226]	733	CALL message( 'check_parameters', 'PA0035', 1, 2, 0, 6, 0 )
[72]	734	ENDIF
	735
[75]	736	IF ( humidity .AND. sloping_surface ) THEN
[214]	737	message_string = 'humidity = .TRUE. and sloping_surface = .TRUE. ' // &
	738	'are not allowed simultaneously'
[226]	739	CALL message( 'check_parameters', 'PA0036', 1, 2, 0, 6, 0 )
[1]	740	ENDIF
	741
[75]	742	IF ( humidity .AND. scalar_advec == 'ups-scheme' ) THEN
[214]	743	message_string = 'UPS-scheme is not implemented for humidity = .TRUE.'
[226]	744	CALL message( 'check_parameters', 'PA0037', 1, 2, 0, 6, 0 )
[1]	745	ENDIF
	746
[75]	747	IF ( passive_scalar .AND. humidity ) THEN
[214]	748	message_string = 'humidity = .TRUE. and passive_scalar = .TRUE. ' // &
	749	'is not allowed simultaneously'
[226]	750	CALL message( 'check_parameters', 'PA0038', 1, 2, 0, 6, 0 )
[1]	751	ENDIF
	752
	753	IF ( passive_scalar .AND. scalar_advec == 'ups-scheme' ) THEN
[214]	754	message_string = 'UPS-scheme is not implemented for passive_scalar' // &
	755	' = .TRUE.'
[226]	756	CALL message( 'check_parameters', 'PA0039', 1, 2, 0, 6, 0 )
[1]	757	ENDIF
	758
	759	IF ( grid_matching /= 'strict' .AND. grid_matching /= 'match' ) THEN
[214]	760	message_string = 'illegal value "' // TRIM( grid_matching ) // &
	761	'" found for parameter grid_matching'
[226]	762	CALL message( 'check_parameters', 'PA0040', 1, 2, 0, 6, 0 )
[1]	763	ENDIF
	764
[138]	765	IF ( plant_canopy .AND. ( drag_coefficient == 0.0 ) ) THEN
[214]	766	message_string = 'plant_canopy = .TRUE. requires a non-zero drag ' // &
	767	'coefficient & given value is drag_coefficient = 0.0'
[226]	768	CALL message( 'check_parameters', 'PA0041', 1, 2, 0, 6, 0 )
[138]	769	ENDIF
	770
[1]	771	!
	772	!-- In case of no model continuation run, check initialising parameters and
	773	!-- deduce further quantities
	774	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
	775
	776	!
[767]	777	!-- Initial profiles for 1D and 3D model, respectively (u,v further below)
[1]	778	pt_init = pt_surface
[94]	779	IF ( humidity ) q_init = q_surface
	780	IF ( ocean ) sa_init = sa_surface
	781	IF ( passive_scalar ) q_init = s_surface
[138]	782	IF ( plant_canopy ) lad = 0.0
[1]	783
	784	!
	785	!--
	786	!-- If required, compute initial profile of the geostrophic wind
	787	!-- (component ug)
	788	i = 1
	789	gradient = 0.0
[97]	790
	791	IF ( .NOT. ocean ) THEN
	792
	793	ug_vertical_gradient_level_ind(1) = 0
	794	ug(0) = ug_surface
	795	DO k = 1, nzt+1
[177]	796	IF ( i < 11 ) THEN
	797	IF ( ug_vertical_gradient_level(i) < zu(k) .AND. &
	798	ug_vertical_gradient_level(i) >= 0.0 ) THEN
	799	gradient = ug_vertical_gradient(i) / 100.0
	800	ug_vertical_gradient_level_ind(i) = k - 1
	801	i = i + 1
[1]	802	ENDIF
[177]	803	ENDIF
[97]	804	IF ( gradient /= 0.0 ) THEN
	805	IF ( k /= 1 ) THEN
	806	ug(k) = ug(k-1) + dzu(k) * gradient
	807	ELSE
	808	ug(k) = ug_surface + 0.5 * dzu(k) * gradient
	809	ENDIF
[1]	810	ELSE
[97]	811	ug(k) = ug(k-1)
[1]	812	ENDIF
[97]	813	ENDDO
[1]	814
[97]	815	ELSE
	816
	817	ug_vertical_gradient_level_ind(1) = nzt+1
[121]	818	ug(nzt+1) = ug_surface
[667]	819	DO k = nzt, nzb, -1
[177]	820	IF ( i < 11 ) THEN
	821	IF ( ug_vertical_gradient_level(i) > zu(k) .AND. &
	822	ug_vertical_gradient_level(i) <= 0.0 ) THEN
	823	gradient = ug_vertical_gradient(i) / 100.0
	824	ug_vertical_gradient_level_ind(i) = k + 1
	825	i = i + 1
[97]	826	ENDIF
	827	ENDIF
	828	IF ( gradient /= 0.0 ) THEN
	829	IF ( k /= nzt ) THEN
	830	ug(k) = ug(k+1) - dzu(k+1) * gradient
	831	ELSE
	832	ug(k) = ug_surface - 0.5 * dzu(k+1) * gradient
	833	ug(k+1) = ug_surface + 0.5 * dzu(k+1) * gradient
	834	ENDIF
	835	ELSE
	836	ug(k) = ug(k+1)
	837	ENDIF
	838	ENDDO
	839
	840	ENDIF
	841
[1]	842	!
[767]	843	!-- In case of no given gradients for ug, choose a zero gradient
[97]	844	IF ( ug_vertical_gradient_level(1) == -9999999.9 ) THEN
[1]	845	ug_vertical_gradient_level(1) = 0.0
	846	ENDIF
	847
	848	!
	849	!--
	850	!-- If required, compute initial profile of the geostrophic wind
	851	!-- (component vg)
	852	i = 1
	853	gradient = 0.0
[97]	854
	855	IF ( .NOT. ocean ) THEN
	856
	857	vg_vertical_gradient_level_ind(1) = 0
	858	vg(0) = vg_surface
	859	DO k = 1, nzt+1
[177]	860	IF ( i < 11 ) THEN
	861	IF ( vg_vertical_gradient_level(i) < zu(k) .AND. &
	862	vg_vertical_gradient_level(i) >= 0.0 ) THEN
	863	gradient = vg_vertical_gradient(i) / 100.0
	864	vg_vertical_gradient_level_ind(i) = k - 1
	865	i = i + 1
[1]	866	ENDIF
	867	ENDIF
[97]	868	IF ( gradient /= 0.0 ) THEN
	869	IF ( k /= 1 ) THEN
	870	vg(k) = vg(k-1) + dzu(k) * gradient
	871	ELSE
	872	vg(k) = vg_surface + 0.5 * dzu(k) * gradient
	873	ENDIF
[1]	874	ELSE
[97]	875	vg(k) = vg(k-1)
[1]	876	ENDIF
[97]	877	ENDDO
[1]	878
[97]	879	ELSE
	880
[121]	881	vg_vertical_gradient_level_ind(1) = nzt+1
	882	vg(nzt+1) = vg_surface
[667]	883	DO k = nzt, nzb, -1
[177]	884	IF ( i < 11 ) THEN
	885	IF ( vg_vertical_gradient_level(i) > zu(k) .AND. &
	886	vg_vertical_gradient_level(i) <= 0.0 ) THEN
	887	gradient = vg_vertical_gradient(i) / 100.0
	888	vg_vertical_gradient_level_ind(i) = k + 1
	889	i = i + 1
[97]	890	ENDIF
	891	ENDIF
	892	IF ( gradient /= 0.0 ) THEN
	893	IF ( k /= nzt ) THEN
	894	vg(k) = vg(k+1) - dzu(k+1) * gradient
	895	ELSE
	896	vg(k) = vg_surface - 0.5 * dzu(k+1) * gradient
	897	vg(k+1) = vg_surface + 0.5 * dzu(k+1) * gradient
	898	ENDIF
	899	ELSE
	900	vg(k) = vg(k+1)
	901	ENDIF
	902	ENDDO
	903
	904	ENDIF
	905
[1]	906	!
[767]	907	!-- In case of no given gradients for vg, choose a zero gradient
[97]	908	IF ( vg_vertical_gradient_level(1) == -9999999.9 ) THEN
[1]	909	vg_vertical_gradient_level(1) = 0.0
	910	ENDIF
	911
	912	!
[767]	913	!-- Let the initial wind profiles be the calculated ug/vg profiles or
	914	!-- interpolate them from wind profile data (if given)
	915	IF ( u_profile(1) == 9999999.9 .AND. v_profile(1) == 9999999.9 ) THEN
	916
	917	u_init = ug
	918	v_init = vg
	919
	920	ELSEIF ( u_profile(1) == 0.0 .AND. v_profile(1) == 0.0 ) THEN
	921
	922	IF ( uv_heights(1) /= 0.0 ) THEN
	923	message_string = 'uv_heights(1) must be 0.0'
	924	CALL message( 'check_parameters', 'PA0345', 1, 2, 0, 6, 0 )
	925	ENDIF
	926
	927	use_prescribed_profile_data = .TRUE.
	928
	929	kk = 1
	930	u_init(0) = 0.0
	931	v_init(0) = 0.0
	932
	933	DO k = 1, nz+1
	934
	935	IF ( kk < 100 ) THEN
	936	DO WHILE ( uv_heights(kk+1) <= zu(k) )
	937	kk = kk + 1
	938	IF ( kk == 100 ) EXIT
	939	ENDDO
	940	ENDIF
	941
	942	IF ( kk < 100 ) THEN
	943	u_init(k) = u_profile(kk) + ( zu(k) - uv_heights(kk) ) / &
	944	( uv_heights(kk+1) - uv_heights(kk) ) * &
	945	( u_profile(kk+1) - u_profile(kk) )
	946	v_init(k) = v_profile(kk) + ( zu(k) - uv_heights(kk) ) / &
	947	( uv_heights(kk+1) - uv_heights(kk) ) * &
	948	( v_profile(kk+1) - v_profile(kk) )
	949	ELSE
	950	u_init(k) = u_profile(kk)
	951	v_init(k) = v_profile(kk)
	952	ENDIF
	953
	954	ENDDO
	955
	956	ELSE
	957
	958	message_string = 'u_profile(1) and v_profile(1) must be 0.0'
	959	CALL message( 'check_parameters', 'PA0346', 1, 2, 0, 6, 0 )
	960
	961	ENDIF
	962
	963	!
[94]	964	!-- Compute initial temperature profile using the given temperature gradients
[1]	965	i = 1
	966	gradient = 0.0
[94]	967
	968	IF ( .NOT. ocean ) THEN
	969
	970	pt_vertical_gradient_level_ind(1) = 0
	971	DO k = 1, nzt+1
[177]	972	IF ( i < 11 ) THEN
	973	IF ( pt_vertical_gradient_level(i) < zu(k) .AND. &
	974	pt_vertical_gradient_level(i) >= 0.0 ) THEN
	975	gradient = pt_vertical_gradient(i) / 100.0
	976	pt_vertical_gradient_level_ind(i) = k - 1
	977	i = i + 1
[1]	978	ENDIF
	979	ENDIF
[94]	980	IF ( gradient /= 0.0 ) THEN
	981	IF ( k /= 1 ) THEN
	982	pt_init(k) = pt_init(k-1) + dzu(k) * gradient
	983	ELSE
	984	pt_init(k) = pt_surface + 0.5 * dzu(k) * gradient
	985	ENDIF
[1]	986	ELSE
[94]	987	pt_init(k) = pt_init(k-1)
[1]	988	ENDIF
[94]	989	ENDDO
[1]	990
[94]	991	ELSE
	992
	993	pt_vertical_gradient_level_ind(1) = nzt+1
	994	DO k = nzt, 0, -1
[177]	995	IF ( i < 11 ) THEN
	996	IF ( pt_vertical_gradient_level(i) > zu(k) .AND. &
	997	pt_vertical_gradient_level(i) <= 0.0 ) THEN
	998	gradient = pt_vertical_gradient(i) / 100.0
	999	pt_vertical_gradient_level_ind(i) = k + 1
	1000	i = i + 1
[94]	1001	ENDIF
	1002	ENDIF
	1003	IF ( gradient /= 0.0 ) THEN
	1004	IF ( k /= nzt ) THEN
	1005	pt_init(k) = pt_init(k+1) - dzu(k+1) * gradient
	1006	ELSE
	1007	pt_init(k) = pt_surface - 0.5 * dzu(k+1) * gradient
	1008	pt_init(k+1) = pt_surface + 0.5 * dzu(k+1) * gradient
	1009	ENDIF
	1010	ELSE
	1011	pt_init(k) = pt_init(k+1)
	1012	ENDIF
	1013	ENDDO
	1014
	1015	ENDIF
	1016
[1]	1017	!
	1018	!-- In case of no given temperature gradients, choose gradient of neutral
	1019	!-- stratification
[94]	1020	IF ( pt_vertical_gradient_level(1) == -9999999.9 ) THEN
[1]	1021	pt_vertical_gradient_level(1) = 0.0
	1022	ENDIF
	1023
	1024	!
[94]	1025	!-- Store temperature gradient at the top boundary for possible Neumann
[1]	1026	!-- boundary condition
[19]	1027	bc_pt_t_val = ( pt_init(nzt+1) - pt_init(nzt) ) / dzu(nzt+1)
[1]	1028
	1029	!
	1030	!-- If required, compute initial humidity or scalar profile using the given
	1031	!-- humidity/scalar gradient. In case of scalar transport, initially store
	1032	!-- values of the scalar parameters on humidity parameters
	1033	IF ( passive_scalar ) THEN
	1034	bc_q_b = bc_s_b
	1035	bc_q_t = bc_s_t
	1036	q_surface = s_surface
	1037	q_surface_initial_change = s_surface_initial_change
	1038	q_vertical_gradient = s_vertical_gradient
	1039	q_vertical_gradient_level = s_vertical_gradient_level
	1040	surface_waterflux = surface_scalarflux
[407]	1041	wall_humidityflux = wall_scalarflux
[1]	1042	ENDIF
	1043
[75]	1044	IF ( humidity .OR. passive_scalar ) THEN
[1]	1045
	1046	i = 1
	1047	gradient = 0.0
	1048	q_vertical_gradient_level_ind(1) = 0
	1049	DO k = 1, nzt+1
[177]	1050	IF ( i < 11 ) THEN
	1051	IF ( q_vertical_gradient_level(i) < zu(k) .AND. &
	1052	q_vertical_gradient_level(i) >= 0.0 ) THEN
	1053	gradient = q_vertical_gradient(i) / 100.0
	1054	q_vertical_gradient_level_ind(i) = k - 1
	1055	i = i + 1
[1]	1056	ENDIF
	1057	ENDIF
	1058	IF ( gradient /= 0.0 ) THEN
	1059	IF ( k /= 1 ) THEN
	1060	q_init(k) = q_init(k-1) + dzu(k) * gradient
	1061	ELSE
	1062	q_init(k) = q_init(k-1) + 0.5 * dzu(k) * gradient
	1063	ENDIF
	1064	ELSE
	1065	q_init(k) = q_init(k-1)
	1066	ENDIF
[72]	1067	!
	1068	!-- Avoid negative humidities
	1069	IF ( q_init(k) < 0.0 ) THEN
	1070	q_init(k) = 0.0
	1071	ENDIF
[1]	1072	ENDDO
	1073
	1074	!
	1075	!-- In case of no given humidity gradients, choose zero gradient
	1076	!-- conditions
	1077	IF ( q_vertical_gradient_level(1) == -1.0 ) THEN
	1078	q_vertical_gradient_level(1) = 0.0
	1079	ENDIF
	1080
	1081	!
	1082	!-- Store humidity gradient at the top boundary for possile Neumann
	1083	!-- boundary condition
[19]	1084	bc_q_t_val = ( q_init(nzt+1) - q_init(nzt) ) / dzu(nzt+1)
[1]	1085
	1086	ENDIF
	1087
[94]	1088	!
	1089	!-- If required, compute initial salinity profile using the given salinity
	1090	!-- gradients
	1091	IF ( ocean ) THEN
	1092
	1093	i = 1
	1094	gradient = 0.0
	1095
	1096	sa_vertical_gradient_level_ind(1) = nzt+1
	1097	DO k = nzt, 0, -1
[177]	1098	IF ( i < 11 ) THEN
	1099	IF ( sa_vertical_gradient_level(i) > zu(k) .AND. &
	1100	sa_vertical_gradient_level(i) <= 0.0 ) THEN
	1101	gradient = sa_vertical_gradient(i) / 100.0
	1102	sa_vertical_gradient_level_ind(i) = k + 1
	1103	i = i + 1
[94]	1104	ENDIF
	1105	ENDIF
	1106	IF ( gradient /= 0.0 ) THEN
	1107	IF ( k /= nzt ) THEN
	1108	sa_init(k) = sa_init(k+1) - dzu(k+1) * gradient
	1109	ELSE
	1110	sa_init(k) = sa_surface - 0.5 * dzu(k+1) * gradient
	1111	sa_init(k+1) = sa_surface + 0.5 * dzu(k+1) * gradient
	1112	ENDIF
	1113	ELSE
	1114	sa_init(k) = sa_init(k+1)
	1115	ENDIF
	1116	ENDDO
	1117
	1118	ENDIF
	1119
[138]	1120	!
[388]	1121	!-- If required compute the profile of leaf area density used in the plant
	1122	!-- canopy model
[138]	1123	IF ( plant_canopy ) THEN
	1124
	1125	i = 1
	1126	gradient = 0.0
[1]	1127
[138]	1128	IF ( .NOT. ocean ) THEN
[153]	1129
	1130	lad(0) = lad_surface
[138]	1131
	1132	lad_vertical_gradient_level_ind(1) = 0
	1133	DO k = 1, pch_index
[177]	1134	IF ( i < 11 ) THEN
	1135	IF ( lad_vertical_gradient_level(i) < zu(k) .AND. &
	1136	lad_vertical_gradient_level(i) >= 0.0 ) THEN
	1137	gradient = lad_vertical_gradient(i)
	1138	lad_vertical_gradient_level_ind(i) = k - 1
	1139	i = i + 1
[138]	1140	ENDIF
	1141	ENDIF
	1142	IF ( gradient /= 0.0 ) THEN
	1143	IF ( k /= 1 ) THEN
	1144	lad(k) = lad(k-1) + dzu(k) * gradient
	1145	ELSE
	1146	lad(k) = lad_surface + 0.5 * dzu(k) *gradient
	1147	ENDIF
	1148	ELSE
	1149	lad(k) = lad(k-1)
	1150	ENDIF
	1151	ENDDO
	1152
	1153	ENDIF
	1154
[1]	1155	!
[388]	1156	!-- In case of no given leaf area density gradients, choose a vanishing
	1157	!-- gradient
[138]	1158	IF ( lad_vertical_gradient_level(1) == -9999999.9 ) THEN
	1159	lad_vertical_gradient_level(1) = 0.0
	1160	ENDIF
	1161
	1162	ENDIF
	1163
	1164	ENDIF
[411]	1165
	1166	!
	1167	!-- Initialize large scale subsidence if required
[580]	1168	IF ( subs_vertical_gradient_level(1) /= -9999999.9 ) THEN
[411]	1169	large_scale_subsidence = .TRUE.
	1170	CALL init_w_subsidence
	1171	END IF
	1172
[138]	1173
[667]	1174
[138]	1175	!
[1]	1176	!-- Compute Coriolis parameter
	1177	f = 2.0 * omega * SIN( phi / 180.0 * pi )
	1178	fs = 2.0 * omega * COS( phi / 180.0 * pi )
	1179
	1180	!
[97]	1181	!-- Ocean runs always use reference values in the buoyancy term. Therefore
	1182	!-- set the reference temperature equal to the surface temperature.
	1183	IF ( ocean .AND. pt_reference == 9999999.9 ) pt_reference = pt_surface
[57]	1184
	1185	!
[97]	1186	!-- Reference value has to be used in buoyancy terms
	1187	IF ( pt_reference /= 9999999.9 ) use_reference = .TRUE.
	1188
	1189	!
	1190	!-- Sign of buoyancy/stability terms
	1191	IF ( ocean ) atmos_ocean_sign = -1.0
	1192
	1193	!
[108]	1194	!-- Ocean version must use flux boundary conditions at the top
	1195	IF ( ocean .AND. .NOT. use_top_fluxes ) THEN
[215]	1196	message_string = 'use_top_fluxes must be .TRUE. in ocean version'
[226]	1197	CALL message( 'check_parameters', 'PA0042', 1, 2, 0, 6, 0 )
[108]	1198	ENDIF
[97]	1199
	1200	!
[1]	1201	!-- In case of a given slope, compute the relevant quantities
	1202	IF ( alpha_surface /= 0.0 ) THEN
	1203	IF ( ABS( alpha_surface ) > 90.0 ) THEN
[215]	1204	WRITE( message_string, * ) 'ABS( alpha_surface = ', alpha_surface, &
	1205	' ) must be < 90.0'
[226]	1206	CALL message( 'check_parameters', 'PA0043', 1, 2, 0, 6, 0 )
[1]	1207	ENDIF
	1208	sloping_surface = .TRUE.
	1209	cos_alpha_surface = COS( alpha_surface / 180.0 * pi )
	1210	sin_alpha_surface = SIN( alpha_surface / 180.0 * pi )
	1211	ENDIF
	1212
	1213	!
	1214	!-- Check time step and cfl_factor
	1215	IF ( dt /= -1.0 ) THEN
	1216	IF ( dt <= 0.0 .AND. dt /= -1.0 ) THEN
[215]	1217	WRITE( message_string, * ) 'dt = ', dt , ' <= 0.0'
[226]	1218	CALL message( 'check_parameters', 'PA0044', 1, 2, 0, 6, 0 )
[1]	1219	ENDIF
	1220	dt_3d = dt
	1221	dt_fixed = .TRUE.
	1222	ENDIF
	1223
	1224	IF ( cfl_factor <= 0.0 .OR. cfl_factor > 1.0 ) THEN
	1225	IF ( cfl_factor == -1.0 ) THEN
	1226	IF ( momentum_advec == 'ups-scheme' .OR. &
	1227	scalar_advec == 'ups-scheme' ) THEN
	1228	cfl_factor = 0.8
	1229	ELSE
	1230	IF ( timestep_scheme == 'runge-kutta-2' ) THEN
	1231	cfl_factor = 0.8
	1232	ELSEIF ( timestep_scheme == 'runge-kutta-3' ) THEN
	1233	cfl_factor = 0.9
	1234	ELSE
	1235	cfl_factor = 0.1
	1236	ENDIF
	1237	ENDIF
	1238	ELSE
[215]	1239	WRITE( message_string, * ) 'cfl_factor = ', cfl_factor, &
	1240	' out of range & 0.0 < cfl_factor <= 1.0 is required'
[226]	1241	CALL message( 'check_parameters', 'PA0045', 1, 2, 0, 6, 0 )
[1]	1242	ENDIF
	1243	ENDIF
	1244
	1245	!
	1246	!-- Store simulated time at begin
	1247	simulated_time_at_begin = simulated_time
	1248
	1249	!
[291]	1250	!-- Store reference time for coupled runs and change the coupling flag,
	1251	!-- if ...
	1252	IF ( simulated_time == 0.0 ) THEN
	1253	IF ( coupling_start_time == 0.0 ) THEN
	1254	time_since_reference_point = 0.0
	1255	ELSEIF ( time_since_reference_point < 0.0 ) THEN
	1256	run_coupled = .FALSE.
	1257	ENDIF
	1258	ENDIF
	1259
	1260	!
[1]	1261	!-- Set wind speed in the Galilei-transformed system
	1262	IF ( galilei_transformation ) THEN
	1263	IF ( use_ug_for_galilei_tr .AND. &
	1264	ug_vertical_gradient_level(1) == 0.0 .AND. &
	1265	vg_vertical_gradient_level(1) == 0.0 ) THEN
	1266	u_gtrans = ug_surface
	1267	v_gtrans = vg_surface
	1268	ELSEIF ( use_ug_for_galilei_tr .AND. &
	1269	ug_vertical_gradient_level(1) /= 0.0 ) THEN
[215]	1270	message_string = 'baroclinicity (ug) not allowed simultaneously' // &
	1271	' with galilei transformation'
[226]	1272	CALL message( 'check_parameters', 'PA0046', 1, 2, 0, 6, 0 )
[1]	1273	ELSEIF ( use_ug_for_galilei_tr .AND. &
	1274	vg_vertical_gradient_level(1) /= 0.0 ) THEN
[215]	1275	message_string = 'baroclinicity (vg) not allowed simultaneously' // &
	1276	' with galilei transformation'
[226]	1277	CALL message( 'check_parameters', 'PA0047', 1, 2, 0, 6, 0 )
[1]	1278	ELSE
[215]	1279	message_string = 'variable translation speed used for galilei-' // &
	1280	'transformation, which may cause & instabilities in stably ' // &
	1281	'stratified regions'
[226]	1282	CALL message( 'check_parameters', 'PA0048', 0, 1, 0, 6, 0 )
[1]	1283	ENDIF
	1284	ENDIF
	1285
	1286	!
	1287	!-- In case of using a prandtl-layer, calculated (or prescribed) surface
	1288	!-- fluxes have to be used in the diffusion-terms
	1289	IF ( prandtl_layer ) use_surface_fluxes = .TRUE.
	1290
	1291	!
	1292	!-- Check boundary conditions and set internal variables:
	1293	!-- Lateral boundary conditions
[73]	1294	IF ( bc_lr /= 'cyclic' .AND. bc_lr /= 'dirichlet/radiation' .AND. &
	1295	bc_lr /= 'radiation/dirichlet' ) THEN
[215]	1296	message_string = 'unknown boundary condition: bc_lr = "' // &
	1297	TRIM( bc_lr ) // '"'
[226]	1298	CALL message( 'check_parameters', 'PA0049', 1, 2, 0, 6, 0 )
[1]	1299	ENDIF
[73]	1300	IF ( bc_ns /= 'cyclic' .AND. bc_ns /= 'dirichlet/radiation' .AND. &
	1301	bc_ns /= 'radiation/dirichlet' ) THEN
[215]	1302	message_string = 'unknown boundary condition: bc_ns = "' // &
	1303	TRIM( bc_ns ) // '"'
[226]	1304	CALL message( 'check_parameters', 'PA0050', 1, 2, 0, 6, 0 )
[1]	1305	ENDIF
	1306
	1307	!
[366]	1308	!-- Internal variables used for speed optimization in if clauses
[707]	1309	IF ( bc_lr /= 'cyclic' ) bc_lr_cyc = .FALSE.
	1310	IF ( bc_lr == 'dirichlet/radiation' ) bc_lr_dirrad = .TRUE.
	1311	IF ( bc_lr == 'radiation/dirichlet' ) bc_lr_raddir = .TRUE.
	1312	IF ( bc_ns /= 'cyclic' ) bc_ns_cyc = .FALSE.
	1313	IF ( bc_ns == 'dirichlet/radiation' ) bc_ns_dirrad = .TRUE.
	1314	IF ( bc_ns == 'radiation/dirichlet' ) bc_ns_raddir = .TRUE.
[366]	1315
	1316	!
[1]	1317	!-- Non-cyclic lateral boundaries require the multigrid method and Piascek-
[667]	1318	!-- Willimas or Wicker - Skamarock advection scheme. Several schemes
	1319	!-- and tools do not work with non-cyclic boundary conditions.
[1]	1320	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	1321	IF ( psolver /= 'multigrid' ) THEN
[215]	1322	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1323	'psolver = "' // TRIM( psolver ) // '"'
[226]	1324	CALL message( 'check_parameters', 'PA0051', 1, 2, 0, 6, 0 )
[1]	1325	ENDIF
[667]	1326	IF ( momentum_advec /= 'pw-scheme' .AND. &
	1327	momentum_advec /= 'ws-scheme') THEN
[215]	1328	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1329	'momentum_advec = "' // TRIM( momentum_advec ) // '"'
[226]	1330	CALL message( 'check_parameters', 'PA0052', 1, 2, 0, 6, 0 )
[1]	1331	ENDIF
[667]	1332	IF ( scalar_advec /= 'pw-scheme' .AND. &
	1333	scalar_advec /= 'ws-scheme' ) THEN
[215]	1334	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1335	'scalar_advec = "' // TRIM( scalar_advec ) // '"'
[226]	1336	CALL message( 'check_parameters', 'PA0053', 1, 2, 0, 6, 0 )
[1]	1337	ENDIF
[667]	1338	IF ( (scalar_advec == 'ws-scheme' .OR. momentum_advec == 'ws-scheme' ) &
	1339	.AND. loop_optimization == 'vector' ) THEN
	1340	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1341	'loop_optimization = vector and ' // &
	1342	'scalar_advec = "' // TRIM( scalar_advec ) // '"'
	1343	! The error message number still needs modification.
	1344	CALL message( 'check_parameters', 'PA0342', 1, 2, 0, 6, 0 )
	1345	END IF
[1]	1346	IF ( galilei_transformation ) THEN
[215]	1347	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1348	'galilei_transformation = .T.'
[226]	1349	CALL message( 'check_parameters', 'PA0054', 1, 2, 0, 6, 0 )
[1]	1350	ENDIF
	1351	ENDIF
	1352
	1353	!
	1354	!-- Bottom boundary condition for the turbulent Kinetic energy
	1355	IF ( bc_e_b == 'neumann' ) THEN
	1356	ibc_e_b = 1
	1357	IF ( adjust_mixing_length .AND. prandtl_layer ) THEN
[215]	1358	message_string = 'adjust_mixing_length = TRUE and bc_e_b = "neumann"'
[226]	1359	CALL message( 'check_parameters', 'PA0055', 0, 1, 0, 6, 0 )
[1]	1360	ENDIF
	1361	ELSEIF ( bc_e_b == '(u)*2+neumann' ) THEN
	1362	ibc_e_b = 2
	1363	IF ( .NOT. adjust_mixing_length .AND. prandtl_layer ) THEN
[215]	1364	message_string = 'adjust_mixing_length = FALSE and bc_e_b = "' // &
	1365	TRIM( bc_e_b ) // '"'
[226]	1366	CALL message( 'check_parameters', 'PA0056', 0, 1, 0, 6, 0 )
[1]	1367	ENDIF
	1368	IF ( .NOT. prandtl_layer ) THEN
	1369	bc_e_b = 'neumann'
	1370	ibc_e_b = 1
[215]	1371	message_string = 'boundary condition bc_e_b changed to "' // &
	1372	TRIM( bc_e_b ) // '"'
[226]	1373	CALL message( 'check_parameters', 'PA0057', 0, 1, 0, 6, 0 )
[1]	1374	ENDIF
	1375	ELSE
[215]	1376	message_string = 'unknown boundary condition: bc_e_b = "' // &
	1377	TRIM( bc_e_b ) // '"'
[226]	1378	CALL message( 'check_parameters', 'PA0058', 1, 2, 0, 6, 0 )
[1]	1379	ENDIF
	1380
	1381	!
	1382	!-- Boundary conditions for perturbation pressure
	1383	IF ( bc_p_b == 'dirichlet' ) THEN
	1384	ibc_p_b = 0
	1385	ELSEIF ( bc_p_b == 'neumann' ) THEN
	1386	ibc_p_b = 1
	1387	ELSEIF ( bc_p_b == 'neumann+inhomo' ) THEN
	1388	ibc_p_b = 2
	1389	ELSE
[215]	1390	message_string = 'unknown boundary condition: bc_p_b = "' // &
	1391	TRIM( bc_p_b ) // '"'
[226]	1392	CALL message( 'check_parameters', 'PA0059', 1, 2, 0, 6, 0 )
[1]	1393	ENDIF
	1394	IF ( ibc_p_b == 2 .AND. .NOT. prandtl_layer ) THEN
[215]	1395	message_string = 'boundary condition: bc_p_b = "' // TRIM( bc_p_b ) // &
	1396	'" not allowed with prandtl_layer = .FALSE.'
[226]	1397	CALL message( 'check_parameters', 'PA0060', 1, 2, 0, 6, 0 )
[1]	1398	ENDIF
	1399	IF ( bc_p_t == 'dirichlet' ) THEN
	1400	ibc_p_t = 0
	1401	ELSEIF ( bc_p_t == 'neumann' ) THEN
	1402	ibc_p_t = 1
	1403	ELSE
[215]	1404	message_string = 'unknown boundary condition: bc_p_t = "' // &
	1405	TRIM( bc_p_t ) // '"'
[226]	1406	CALL message( 'check_parameters', 'PA0061', 1, 2, 0, 6, 0 )
[1]	1407	ENDIF
	1408
	1409	!
	1410	!-- Boundary conditions for potential temperature
[102]	1411	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
	1412	ibc_pt_b = 2
[1]	1413	ELSE
[102]	1414	IF ( bc_pt_b == 'dirichlet' ) THEN
	1415	ibc_pt_b = 0
	1416	ELSEIF ( bc_pt_b == 'neumann' ) THEN
	1417	ibc_pt_b = 1
	1418	ELSE
[215]	1419	message_string = 'unknown boundary condition: bc_pt_b = "' // &
	1420	TRIM( bc_pt_b ) // '"'
[226]	1421	CALL message( 'check_parameters', 'PA0062', 1, 2, 0, 6, 0 )
[1]	1422	ENDIF
	1423	ENDIF
[102]	1424
[1]	1425	IF ( bc_pt_t == 'dirichlet' ) THEN
	1426	ibc_pt_t = 0
	1427	ELSEIF ( bc_pt_t == 'neumann' ) THEN
	1428	ibc_pt_t = 1
[19]	1429	ELSEIF ( bc_pt_t == 'initial_gradient' ) THEN
	1430	ibc_pt_t = 2
[1]	1431	ELSE
[215]	1432	message_string = 'unknown boundary condition: bc_pt_t = "' // &
	1433	TRIM( bc_pt_t ) // '"'
[226]	1434	CALL message( 'check_parameters', 'PA0063', 1, 2, 0, 6, 0 )
[1]	1435	ENDIF
	1436
[20]	1437	IF ( surface_heatflux == 9999999.9 ) constant_heatflux = .FALSE.
	1438	IF ( top_heatflux == 9999999.9 ) constant_top_heatflux = .FALSE.
[103]	1439	IF ( top_momentumflux_u /= 9999999.9 .AND. &
	1440	top_momentumflux_v /= 9999999.9 ) THEN
	1441	constant_top_momentumflux = .TRUE.
	1442	ELSEIF ( .NOT. ( top_momentumflux_u == 9999999.9 .AND. &
[215]	1443	top_momentumflux_v == 9999999.9 ) ) THEN
	1444	message_string = 'both, top_momentumflux_u AND top_momentumflux_v ' // &
	1445	'must be set'
[226]	1446	CALL message( 'check_parameters', 'PA0064', 1, 2, 0, 6, 0 )
[103]	1447	ENDIF
[1]	1448
	1449	!
	1450	!-- A given surface temperature implies Dirichlet boundary condition for
	1451	!-- temperature. In this case specification of a constant heat flux is
	1452	!-- forbidden.
	1453	IF ( ibc_pt_b == 0 .AND. constant_heatflux .AND. &
	1454	surface_heatflux /= 0.0 ) THEN
[215]	1455	message_string = 'boundary_condition: bc_pt_b = "' // TRIM( bc_pt_b ) //&
	1456	'& is not allowed with constant_heatflux = .TRUE.'
[226]	1457	CALL message( 'check_parameters', 'PA0065', 1, 2, 0, 6, 0 )
[1]	1458	ENDIF
	1459	IF ( constant_heatflux .AND. pt_surface_initial_change /= 0.0 ) THEN
[215]	1460	WRITE ( message_string, * ) 'constant_heatflux = .TRUE. is not allo', &
	1461	'wed with pt_surface_initial_change (/=0) = ', &
	1462	pt_surface_initial_change
[226]	1463	CALL message( 'check_parameters', 'PA0066', 1, 2, 0, 6, 0 )
[1]	1464	ENDIF
	1465
	1466	!
[19]	1467	!-- A given temperature at the top implies Dirichlet boundary condition for
	1468	!-- temperature. In this case specification of a constant heat flux is
	1469	!-- forbidden.
	1470	IF ( ibc_pt_t == 0 .AND. constant_top_heatflux .AND. &
	1471	top_heatflux /= 0.0 ) THEN
[215]	1472	message_string = 'boundary_condition: bc_pt_t = "' // TRIM( bc_pt_t ) //&
	1473	'" is not allowed with constant_top_heatflux = .TRUE.'
[226]	1474	CALL message( 'check_parameters', 'PA0067', 1, 2, 0, 6, 0 )
[19]	1475	ENDIF
	1476
	1477	!
[95]	1478	!-- Boundary conditions for salinity
	1479	IF ( ocean ) THEN
	1480	IF ( bc_sa_t == 'dirichlet' ) THEN
	1481	ibc_sa_t = 0
	1482	ELSEIF ( bc_sa_t == 'neumann' ) THEN
	1483	ibc_sa_t = 1
	1484	ELSE
[215]	1485	message_string = 'unknown boundary condition: bc_sa_t = "' // &
	1486	TRIM( bc_sa_t ) // '"'
[226]	1487	CALL message( 'check_parameters', 'PA0068', 1, 2, 0, 6, 0 )
[95]	1488	ENDIF
	1489
	1490	IF ( top_salinityflux == 9999999.9 ) constant_top_salinityflux = .FALSE.
[97]	1491	IF ( ibc_sa_t == 1 .AND. top_salinityflux == 9999999.9 ) THEN
[215]	1492	message_string = 'boundary condition: bc_sa_t = "' // &
	1493	TRIM( bc_sa_t ) // '" requires to set ' // &
	1494	'top_salinityflux'
[226]	1495	CALL message( 'check_parameters', 'PA0069', 1, 2, 0, 6, 0 )
[97]	1496	ENDIF
[95]	1497
	1498	!
	1499	!-- A fixed salinity at the top implies Dirichlet boundary condition for
	1500	!-- salinity. In this case specification of a constant salinity flux is
	1501	!-- forbidden.
	1502	IF ( ibc_sa_t == 0 .AND. constant_top_salinityflux .AND. &
	1503	top_salinityflux /= 0.0 ) THEN
[215]	1504	message_string = 'boundary condition: bc_sa_t = "' // &
	1505	TRIM( bc_sa_t ) // '" is not allowed with ' // &
	1506	'constant_top_salinityflux = .TRUE.'
[226]	1507	CALL message( 'check_parameters', 'PA0070', 1, 2, 0, 6, 0 )
[95]	1508	ENDIF
	1509
	1510	ENDIF
	1511
	1512	!
[75]	1513	!-- In case of humidity or passive scalar, set boundary conditions for total
[1]	1514	!-- water content / scalar
[75]	1515	IF ( humidity .OR. passive_scalar ) THEN
	1516	IF ( humidity ) THEN
[1]	1517	sq = 'q'
	1518	ELSE
	1519	sq = 's'
	1520	ENDIF
	1521	IF ( bc_q_b == 'dirichlet' ) THEN
	1522	ibc_q_b = 0
	1523	ELSEIF ( bc_q_b == 'neumann' ) THEN
	1524	ibc_q_b = 1
	1525	ELSE
[215]	1526	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
	1527	'_b ="' // TRIM( bc_q_b ) // '"'
[226]	1528	CALL message( 'check_parameters', 'PA0071', 1, 2, 0, 6, 0 )
[1]	1529	ENDIF
	1530	IF ( bc_q_t == 'dirichlet' ) THEN
	1531	ibc_q_t = 0
	1532	ELSEIF ( bc_q_t == 'neumann' ) THEN
	1533	ibc_q_t = 1
	1534	ELSE
[215]	1535	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
	1536	'_t ="' // TRIM( bc_q_t ) // '"'
[226]	1537	CALL message( 'check_parameters', 'PA0072', 1, 2, 0, 6, 0 )
[1]	1538	ENDIF
	1539
[600]	1540	IF ( surface_waterflux == 9999999.9 ) constant_waterflux = .FALSE.
[1]	1541
	1542	!
	1543	!-- A given surface humidity implies Dirichlet boundary condition for
[75]	1544	!-- humidity. In this case specification of a constant water flux is
[1]	1545	!-- forbidden.
	1546	IF ( ibc_q_b == 0 .AND. constant_waterflux ) THEN
[215]	1547	message_string = 'boundary condition: bc_' // TRIM( sq ) // '_b ' // &
	1548	'= "' // TRIM( bc_q_b ) // '" is not allowed wi' // &
	1549	'th prescribed surface flux'
[226]	1550	CALL message( 'check_parameters', 'PA0073', 1, 2, 0, 6, 0 )
[1]	1551	ENDIF
	1552	IF ( constant_waterflux .AND. q_surface_initial_change /= 0.0 ) THEN
[215]	1553	WRITE( message_string, * ) 'a prescribed surface flux is not allo', &
	1554	'wed with ', sq, '_surface_initial_change (/=0) = ', &
	1555	q_surface_initial_change
[226]	1556	CALL message( 'check_parameters', 'PA0074', 1, 2, 0, 6, 0 )
[1]	1557	ENDIF
	1558
	1559	ENDIF
	1560
	1561	!
	1562	!-- Boundary conditions for horizontal components of wind speed
	1563	IF ( bc_uv_b == 'dirichlet' ) THEN
	1564	ibc_uv_b = 0
	1565	ELSEIF ( bc_uv_b == 'neumann' ) THEN
	1566	ibc_uv_b = 1
	1567	IF ( prandtl_layer ) THEN
[215]	1568	message_string = 'boundary condition: bc_uv_b = "' // &
	1569	TRIM( bc_uv_b ) // '" is not allowed with prandtl_layer = .TRUE.'
[226]	1570	CALL message( 'check_parameters', 'PA0075', 1, 2, 0, 6, 0 )
[1]	1571	ENDIF
	1572	ELSE
[215]	1573	message_string = 'unknown boundary condition: bc_uv_b = "' // &
	1574	TRIM( bc_uv_b ) // '"'
[226]	1575	CALL message( 'check_parameters', 'PA0076', 1, 2, 0, 6, 0 )
[1]	1576	ENDIF
[667]	1577	!
	1578	!-- In case of coupled simulations u and v at the ground in atmosphere will be
	1579	!-- assigned with the u and v values of the ocean surface
	1580	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
	1581	ibc_uv_b = 2
	1582	ENDIF
[215]	1583
[108]	1584	IF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	1585	bc_uv_t = 'neumann'
[1]	1586	ibc_uv_t = 1
	1587	ELSE
[132]	1588	IF ( bc_uv_t == 'dirichlet' .OR. bc_uv_t == 'dirichlet_0' ) THEN
[108]	1589	ibc_uv_t = 0
[767]	1590	IF ( bc_uv_t == 'dirichlet_0' ) THEN
	1591	!
	1592	!-- Velocities for the initial u,v-profiles are set zero at the top
	1593	!-- in case of dirichlet_0 conditions
	1594	u_init(nzt+1) = 0.0
	1595	v_init(nzt+1) = 0.0
	1596	ENDIF
[108]	1597	ELSEIF ( bc_uv_t == 'neumann' ) THEN
	1598	ibc_uv_t = 1
	1599	ELSE
[215]	1600	message_string = 'unknown boundary condition: bc_uv_t = "' // &
	1601	TRIM( bc_uv_t ) // '"'
[226]	1602	CALL message( 'check_parameters', 'PA0077', 1, 2, 0, 6, 0 )
[1]	1603	ENDIF
	1604	ENDIF
	1605
	1606	!
	1607	!-- Compute and check, respectively, the Rayleigh Damping parameter
	1608	IF ( rayleigh_damping_factor == -1.0 ) THEN
	1609	IF ( momentum_advec == 'ups-scheme' ) THEN
	1610	rayleigh_damping_factor = 0.01
	1611	ELSE
	1612	rayleigh_damping_factor = 0.0
	1613	ENDIF
	1614	ELSE
	1615	IF ( rayleigh_damping_factor < 0.0 .OR. rayleigh_damping_factor > 1.0 ) &
	1616	THEN
[215]	1617	WRITE( message_string, * ) 'rayleigh_damping_factor = ', &
	1618	rayleigh_damping_factor, ' out of range [0.0,1.0]'
[226]	1619	CALL message( 'check_parameters', 'PA0078', 1, 2, 0, 6, 0 )
[1]	1620	ENDIF
	1621	ENDIF
	1622
	1623	IF ( rayleigh_damping_height == -1.0 ) THEN
[108]	1624	IF ( .NOT. ocean ) THEN
	1625	rayleigh_damping_height = 0.66666666666 * zu(nzt)
	1626	ELSE
	1627	rayleigh_damping_height = 0.66666666666 * zu(nzb)
	1628	ENDIF
[1]	1629	ELSE
[108]	1630	IF ( .NOT. ocean ) THEN
	1631	IF ( rayleigh_damping_height < 0.0 .OR. &
	1632	rayleigh_damping_height > zu(nzt) ) THEN
[215]	1633	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
	1634	rayleigh_damping_height, ' out of range [0.0,', zu(nzt), ']'
[226]	1635	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
[1]	1636	ENDIF
[108]	1637	ELSE
	1638	IF ( rayleigh_damping_height > 0.0 .OR. &
	1639	rayleigh_damping_height < zu(nzb) ) THEN
[215]	1640	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
	1641	rayleigh_damping_height, ' out of range [0.0,', zu(nzb), ']'
[226]	1642	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
[108]	1643	ENDIF
[1]	1644	ENDIF
	1645	ENDIF
	1646
	1647	!
	1648	!-- Check limiters for Upstream-Spline scheme
	1649	IF ( overshoot_limit_u < 0.0 .OR. overshoot_limit_v < 0.0 .OR. &
	1650	overshoot_limit_w < 0.0 .OR. overshoot_limit_pt < 0.0 .OR. &
	1651	overshoot_limit_e < 0.0 ) THEN
[215]	1652	message_string = 'overshoot_limit_... < 0.0 is not allowed'
[226]	1653	CALL message( 'check_parameters', 'PA0080', 1, 2, 0, 6, 0 )
[1]	1654	ENDIF
	1655	IF ( ups_limit_u < 0.0 .OR. ups_limit_v < 0.0 .OR. ups_limit_w < 0.0 .OR. &
	1656	ups_limit_pt < 0.0 .OR. ups_limit_e < 0.0 ) THEN
[215]	1657	message_string = 'ups_limit_... < 0.0 is not allowed'
[226]	1658	CALL message( 'check_parameters', 'PA0081', 1, 2, 0, 6, 0 )
[1]	1659	ENDIF
	1660
	1661	!
	1662	!-- Check number of chosen statistic regions. More than 10 regions are not
	1663	!-- allowed, because so far no more than 10 corresponding output files can
	1664	!-- be opened (cf. check_open)
	1665	IF ( statistic_regions > 9 .OR. statistic_regions < 0 ) THEN
[215]	1666	WRITE ( message_string, * ) 'number of statistic_regions = ', &
	1667	statistic_regions+1, ' but only 10 regions are allowed'
[226]	1668	CALL message( 'check_parameters', 'PA0082', 1, 2, 0, 6, 0 )
[1]	1669	ENDIF
	1670	IF ( normalizing_region > statistic_regions .OR. &
	1671	normalizing_region < 0) THEN
[215]	1672	WRITE ( message_string, * ) 'normalizing_region = ', &
	1673	normalizing_region, ' must be >= 0 and <= ',statistic_regions, &
	1674	' (value of statistic_regions)'
[226]	1675	CALL message( 'check_parameters', 'PA0083', 1, 2, 0, 6, 0 )
[1]	1676	ENDIF
	1677
	1678	!
[116]	1679	!-- Check the interval for sorting particles.
	1680	!-- Using particles as cloud droplets requires sorting after each timestep.
	1681	IF ( dt_sort_particles /= 0.0 .AND. cloud_droplets ) THEN
	1682	dt_sort_particles = 0.0
[215]	1683	message_string = 'dt_sort_particles is reset to 0.0 because of cloud' //&
	1684	'_droplets = .TRUE.'
[226]	1685	CALL message( 'check_parameters', 'PA0084', 0, 1, 0, 6, 0 )
[116]	1686	ENDIF
	1687
	1688	!
[1]	1689	!-- Set the default intervals for data output, if necessary
	1690	!-- NOTE: dt_dosp has already been set in package_parin
	1691	IF ( dt_data_output /= 9999999.9 ) THEN
	1692	IF ( dt_dopr == 9999999.9 ) dt_dopr = dt_data_output
	1693	IF ( dt_dopts == 9999999.9 ) dt_dopts = dt_data_output
	1694	IF ( dt_do2d_xy == 9999999.9 ) dt_do2d_xy = dt_data_output
	1695	IF ( dt_do2d_xz == 9999999.9 ) dt_do2d_xz = dt_data_output
	1696	IF ( dt_do2d_yz == 9999999.9 ) dt_do2d_yz = dt_data_output
	1697	IF ( dt_do3d == 9999999.9 ) dt_do3d = dt_data_output
	1698	IF ( dt_data_output_av == 9999999.9 ) dt_data_output_av = dt_data_output
[564]	1699	DO mid = 1, max_masks
[410]	1700	IF ( dt_domask(mid) == 9999999.9 ) dt_domask(mid) = dt_data_output
	1701	ENDDO
[1]	1702	ENDIF
	1703
	1704	!
	1705	!-- Set the default skip time intervals for data output, if necessary
	1706	IF ( skip_time_dopr == 9999999.9 ) &
	1707	skip_time_dopr = skip_time_data_output
	1708	IF ( skip_time_dosp == 9999999.9 ) &
	1709	skip_time_dosp = skip_time_data_output
	1710	IF ( skip_time_do2d_xy == 9999999.9 ) &
	1711	skip_time_do2d_xy = skip_time_data_output
	1712	IF ( skip_time_do2d_xz == 9999999.9 ) &
	1713	skip_time_do2d_xz = skip_time_data_output
	1714	IF ( skip_time_do2d_yz == 9999999.9 ) &
	1715	skip_time_do2d_yz = skip_time_data_output
	1716	IF ( skip_time_do3d == 9999999.9 ) &
	1717	skip_time_do3d = skip_time_data_output
	1718	IF ( skip_time_data_output_av == 9999999.9 ) &
	1719	skip_time_data_output_av = skip_time_data_output
[564]	1720	DO mid = 1, max_masks
[410]	1721	IF ( skip_time_domask(mid) == 9999999.9 ) &
	1722	skip_time_domask(mid) = skip_time_data_output
	1723	ENDDO
[1]	1724
	1725	!
	1726	!-- Check the average intervals (first for 3d-data, then for profiles and
	1727	!-- spectra)
	1728	IF ( averaging_interval > dt_data_output_av ) THEN
[215]	1729	WRITE( message_string, * ) 'averaging_interval = ', &
	1730	averaging_interval, ' must be <= dt_data_output = ', dt_data_output
[226]	1731	CALL message( 'check_parameters', 'PA0085', 1, 2, 0, 6, 0 )
[1]	1732	ENDIF
	1733
	1734	IF ( averaging_interval_pr == 9999999.9 ) THEN
	1735	averaging_interval_pr = averaging_interval
	1736	ENDIF
	1737
	1738	IF ( averaging_interval_pr > dt_dopr ) THEN
[215]	1739	WRITE( message_string, * ) 'averaging_interval_pr = ', &
	1740	averaging_interval_pr, ' must be <= dt_dopr = ', dt_dopr
[226]	1741	CALL message( 'check_parameters', 'PA0086', 1, 2, 0, 6, 0 )
[1]	1742	ENDIF
	1743
	1744	IF ( averaging_interval_sp == 9999999.9 ) THEN
	1745	averaging_interval_sp = averaging_interval
	1746	ENDIF
	1747
	1748	IF ( averaging_interval_sp > dt_dosp ) THEN
[215]	1749	WRITE( message_string, * ) 'averaging_interval_sp = ', &
	1750	averaging_interval_sp, ' must be <= dt_dosp = ', dt_dosp
[226]	1751	CALL message( 'check_parameters', 'PA0087', 1, 2, 0, 6, 0 )
[1]	1752	ENDIF
	1753
	1754	!
	1755	!-- Set the default interval for profiles entering the temporal average
	1756	IF ( dt_averaging_input_pr == 9999999.9 ) THEN
	1757	dt_averaging_input_pr = dt_averaging_input
	1758	ENDIF
	1759
	1760	!
	1761	!-- Set the default interval for the output of timeseries to a reasonable
	1762	!-- value (tries to minimize the number of calls of flow_statistics)
	1763	IF ( dt_dots == 9999999.9 ) THEN
	1764	IF ( averaging_interval_pr == 0.0 ) THEN
	1765	dt_dots = MIN( dt_run_control, dt_dopr )
	1766	ELSE
	1767	dt_dots = MIN( dt_run_control, dt_averaging_input_pr )
	1768	ENDIF
	1769	ENDIF
	1770
	1771	!
	1772	!-- Check the sample rate for averaging (first for 3d-data, then for profiles)
	1773	IF ( dt_averaging_input > averaging_interval ) THEN
[215]	1774	WRITE( message_string, * ) 'dt_averaging_input = ', &
	1775	dt_averaging_input, ' must be <= averaging_interval = ', &
	1776	averaging_interval
[226]	1777	CALL message( 'check_parameters', 'PA0088', 1, 2, 0, 6, 0 )
[1]	1778	ENDIF
	1779
	1780	IF ( dt_averaging_input_pr > averaging_interval_pr ) THEN
[215]	1781	WRITE( message_string, * ) 'dt_averaging_input_pr = ', &
	1782	dt_averaging_input_pr, ' must be <= averaging_interval_pr = ', &
	1783	averaging_interval_pr
[226]	1784	CALL message( 'check_parameters', 'PA0089', 1, 2, 0, 6, 0 )
[1]	1785	ENDIF
	1786
	1787	!
[72]	1788	!-- Set the default value for the integration interval of precipitation amount
	1789	IF ( precipitation ) THEN
	1790	IF ( precipitation_amount_interval == 9999999.9 ) THEN
	1791	precipitation_amount_interval = dt_do2d_xy
	1792	ELSE
	1793	IF ( precipitation_amount_interval > dt_do2d_xy ) THEN
[215]	1794	WRITE( message_string, * ) 'precipitation_amount_interval = ', &
	1795	precipitation_amount_interval, ' must not be larger than ', &
	1796	'dt_do2d_xy = ', dt_do2d_xy
[226]	1797	CALL message( 'check_parameters', 'PA0090', 1, 2, 0, 6, 0 )
[72]	1798	ENDIF
	1799	ENDIF
	1800	ENDIF
	1801
	1802	!
[1]	1803	!-- Determine the number of output profiles and check whether they are
	1804	!-- permissible
	1805	DO WHILE ( data_output_pr(dopr_n+1) /= ' ' )
	1806
	1807	dopr_n = dopr_n + 1
	1808	i = dopr_n
	1809
	1810	!
	1811	!-- Determine internal profile number (for hom, homs)
	1812	!-- and store height levels
	1813	SELECT CASE ( TRIM( data_output_pr(i) ) )
	1814
	1815	CASE ( 'u', '#u' )
	1816	dopr_index(i) = 1
[87]	1817	dopr_unit(i) = 'm/s'
[1]	1818	hom(:,2,1,:) = SPREAD( zu, 2, statistic_regions+1 )
	1819	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1820	dopr_initial_index(i) = 5
	1821	hom(:,2,5,:) = SPREAD( zu, 2, statistic_regions+1 )
	1822	data_output_pr(i) = data_output_pr(i)(2:)
	1823	ENDIF
	1824
	1825	CASE ( 'v', '#v' )
	1826	dopr_index(i) = 2
[87]	1827	dopr_unit(i) = 'm/s'
	1828	hom(:,2,2,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1829	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1830	dopr_initial_index(i) = 6
	1831	hom(:,2,6,:) = SPREAD( zu, 2, statistic_regions+1 )
	1832	data_output_pr(i) = data_output_pr(i)(2:)
	1833	ENDIF
	1834
	1835	CASE ( 'w' )
	1836	dopr_index(i) = 3
[87]	1837	dopr_unit(i) = 'm/s'
	1838	hom(:,2,3,:) = SPREAD( zw, 2, statistic_regions+1 )
[1]	1839
	1840	CASE ( 'pt', '#pt' )
	1841	IF ( .NOT. cloud_physics ) THEN
	1842	dopr_index(i) = 4
[87]	1843	dopr_unit(i) = 'K'
[1]	1844	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
	1845	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1846	dopr_initial_index(i) = 7
	1847	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
[87]	1848	hom(nzb,2,7,:) = 0.0 ! because zu(nzb) is negative
[1]	1849	data_output_pr(i) = data_output_pr(i)(2:)
	1850	ENDIF
	1851	ELSE
	1852	dopr_index(i) = 43
[87]	1853	dopr_unit(i) = 'K'
[1]	1854	hom(:,2,43,:) = SPREAD( zu, 2, statistic_regions+1 )
	1855	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1856	dopr_initial_index(i) = 28
	1857	hom(:,2,28,:) = SPREAD( zu, 2, statistic_regions+1 )
[87]	1858	hom(nzb,2,28,:) = 0.0 ! because zu(nzb) is negative
[1]	1859	data_output_pr(i) = data_output_pr(i)(2:)
	1860	ENDIF
	1861	ENDIF
	1862
	1863	CASE ( 'e' )
	1864	dopr_index(i) = 8
[87]	1865	dopr_unit(i) = 'm2/s2'
[1]	1866	hom(:,2,8,:) = SPREAD( zu, 2, statistic_regions+1 )
	1867	hom(nzb,2,8,:) = 0.0
	1868
	1869	CASE ( 'km', '#km' )
	1870	dopr_index(i) = 9
[87]	1871	dopr_unit(i) = 'm2/s'
[1]	1872	hom(:,2,9,:) = SPREAD( zu, 2, statistic_regions+1 )
	1873	hom(nzb,2,9,:) = 0.0
	1874	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1875	dopr_initial_index(i) = 23
	1876	hom(:,2,23,:) = hom(:,2,9,:)
	1877	data_output_pr(i) = data_output_pr(i)(2:)
	1878	ENDIF
	1879
	1880	CASE ( 'kh', '#kh' )
	1881	dopr_index(i) = 10
[87]	1882	dopr_unit(i) = 'm2/s'
[1]	1883	hom(:,2,10,:) = SPREAD( zu, 2, statistic_regions+1 )
	1884	hom(nzb,2,10,:) = 0.0
	1885	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1886	dopr_initial_index(i) = 24
	1887	hom(:,2,24,:) = hom(:,2,10,:)
	1888	data_output_pr(i) = data_output_pr(i)(2:)
	1889	ENDIF
	1890
	1891	CASE ( 'l', '#l' )
	1892	dopr_index(i) = 11
[87]	1893	dopr_unit(i) = 'm'
[1]	1894	hom(:,2,11,:) = SPREAD( zu, 2, statistic_regions+1 )
	1895	hom(nzb,2,11,:) = 0.0
	1896	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1897	dopr_initial_index(i) = 25
	1898	hom(:,2,25,:) = hom(:,2,11,:)
	1899	data_output_pr(i) = data_output_pr(i)(2:)
	1900	ENDIF
	1901
	1902	CASE ( 'w"u"' )
	1903	dopr_index(i) = 12
[87]	1904	dopr_unit(i) = 'm2/s2'
[1]	1905	hom(:,2,12,:) = SPREAD( zw, 2, statistic_regions+1 )
	1906	IF ( prandtl_layer ) hom(nzb,2,12,:) = zu(1)
	1907
	1908	CASE ( 'wu' )
	1909	dopr_index(i) = 13
[87]	1910	dopr_unit(i) = 'm2/s2'
[1]	1911	hom(:,2,13,:) = SPREAD( zw, 2, statistic_regions+1 )
	1912
	1913	CASE ( 'w"v"' )
	1914	dopr_index(i) = 14
[87]	1915	dopr_unit(i) = 'm2/s2'
[1]	1916	hom(:,2,14,:) = SPREAD( zw, 2, statistic_regions+1 )
	1917	IF ( prandtl_layer ) hom(nzb,2,14,:) = zu(1)
	1918
	1919	CASE ( 'wv' )
	1920	dopr_index(i) = 15
[87]	1921	dopr_unit(i) = 'm2/s2'
[1]	1922	hom(:,2,15,:) = SPREAD( zw, 2, statistic_regions+1 )
	1923
	1924	CASE ( 'w"pt"' )
	1925	dopr_index(i) = 16
[87]	1926	dopr_unit(i) = 'K m/s'
[1]	1927	hom(:,2,16,:) = SPREAD( zw, 2, statistic_regions+1 )
	1928
	1929	CASE ( 'wpt' )
	1930	dopr_index(i) = 17
[87]	1931	dopr_unit(i) = 'K m/s'
[1]	1932	hom(:,2,17,:) = SPREAD( zw, 2, statistic_regions+1 )
	1933
	1934	CASE ( 'wpt' )
	1935	dopr_index(i) = 18
[87]	1936	dopr_unit(i) = 'K m/s'
[1]	1937	hom(:,2,18,:) = SPREAD( zw, 2, statistic_regions+1 )
	1938
	1939	CASE ( 'wu' )
	1940	dopr_index(i) = 19
[87]	1941	dopr_unit(i) = 'm2/s2'
[1]	1942	hom(:,2,19,:) = SPREAD( zw, 2, statistic_regions+1 )
	1943	IF ( prandtl_layer ) hom(nzb,2,19,:) = zu(1)
	1944
	1945	CASE ( 'wv' )
	1946	dopr_index(i) = 20
[87]	1947	dopr_unit(i) = 'm2/s2'
[1]	1948	hom(:,2,20,:) = SPREAD( zw, 2, statistic_regions+1 )
	1949	IF ( prandtl_layer ) hom(nzb,2,20,:) = zu(1)
	1950
	1951	CASE ( 'wptBC' )
	1952	dopr_index(i) = 21
[87]	1953	dopr_unit(i) = 'K m/s'
[1]	1954	hom(:,2,21,:) = SPREAD( zw, 2, statistic_regions+1 )
	1955
	1956	CASE ( 'wptBC' )
	1957	dopr_index(i) = 22
[87]	1958	dopr_unit(i) = 'K m/s'
[1]	1959	hom(:,2,22,:) = SPREAD( zw, 2, statistic_regions+1 )
	1960
[96]	1961	CASE ( 'sa', '#sa' )
	1962	IF ( .NOT. ocean ) THEN
[215]	1963	message_string = 'data_output_pr = ' // &
	1964	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1965	'lemented for ocean = .FALSE.'
[226]	1966	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	1967	ELSE
	1968	dopr_index(i) = 23
	1969	dopr_unit(i) = 'psu'
	1970	hom(:,2,23,:) = SPREAD( zu, 2, statistic_regions+1 )
	1971	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1972	dopr_initial_index(i) = 26
	1973	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	1974	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	1975	data_output_pr(i) = data_output_pr(i)(2:)
	1976	ENDIF
	1977	ENDIF
	1978
[1]	1979	CASE ( 'u*2' )
	1980	dopr_index(i) = 30
[87]	1981	dopr_unit(i) = 'm2/s2'
[1]	1982	hom(:,2,30,:) = SPREAD( zu, 2, statistic_regions+1 )
	1983
	1984	CASE ( 'v*2' )
	1985	dopr_index(i) = 31
[87]	1986	dopr_unit(i) = 'm2/s2'
[1]	1987	hom(:,2,31,:) = SPREAD( zu, 2, statistic_regions+1 )
	1988
	1989	CASE ( 'w*2' )
	1990	dopr_index(i) = 32
[87]	1991	dopr_unit(i) = 'm2/s2'
[1]	1992	hom(:,2,32,:) = SPREAD( zw, 2, statistic_regions+1 )
	1993
	1994	CASE ( 'pt*2' )
	1995	dopr_index(i) = 33
[87]	1996	dopr_unit(i) = 'K2'
[1]	1997	hom(:,2,33,:) = SPREAD( zu, 2, statistic_regions+1 )
	1998
	1999	CASE ( 'e*' )
	2000	dopr_index(i) = 34
[87]	2001	dopr_unit(i) = 'm2/s2'
[1]	2002	hom(:,2,34,:) = SPREAD( zu, 2, statistic_regions+1 )
	2003
	2004	CASE ( 'w2pt' )
	2005	dopr_index(i) = 35
[87]	2006	dopr_unit(i) = 'K m2/s2'
[1]	2007	hom(:,2,35,:) = SPREAD( zw, 2, statistic_regions+1 )
	2008
	2009	CASE ( 'wpt2' )
	2010	dopr_index(i) = 36
[87]	2011	dopr_unit(i) = 'K2 m/s'
[1]	2012	hom(:,2,36,:) = SPREAD( zw, 2, statistic_regions+1 )
	2013
	2014	CASE ( 'we' )
	2015	dopr_index(i) = 37
[87]	2016	dopr_unit(i) = 'm3/s3'
[1]	2017	hom(:,2,37,:) = SPREAD( zw, 2, statistic_regions+1 )
	2018
	2019	CASE ( 'w*3' )
	2020	dopr_index(i) = 38
[87]	2021	dopr_unit(i) = 'm3/s3'
[1]	2022	hom(:,2,38,:) = SPREAD( zw, 2, statistic_regions+1 )
	2023
	2024	CASE ( 'Sw' )
	2025	dopr_index(i) = 39
[89]	2026	dopr_unit(i) = 'none'
[1]	2027	hom(:,2,39,:) = SPREAD( zw, 2, statistic_regions+1 )
	2028
[232]	2029	CASE ( 'p' )
	2030	dopr_index(i) = 40
	2031	dopr_unit(i) = 'Pa'
	2032	hom(:,2,40,:) = SPREAD( zu, 2, statistic_regions+1 )
	2033
[1]	2034	CASE ( 'q', '#q' )
[108]	2035	IF ( .NOT. humidity ) THEN
[215]	2036	message_string = 'data_output_pr = ' // &
	2037	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2038	'lemented for humidity = .FALSE.'
[226]	2039	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	2040	ELSE
	2041	dopr_index(i) = 41
[87]	2042	dopr_unit(i) = 'kg/kg'
	2043	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2044	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2045	dopr_initial_index(i) = 26
	2046	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	2047	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	2048	data_output_pr(i) = data_output_pr(i)(2:)
	2049	ENDIF
	2050	ENDIF
	2051
	2052	CASE ( 's', '#s' )
	2053	IF ( .NOT. passive_scalar ) THEN
[215]	2054	message_string = 'data_output_pr = ' // &
	2055	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2056	'lemented for passive_scalar = .FALSE.'
[226]	2057	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	2058	ELSE
	2059	dopr_index(i) = 41
[87]	2060	dopr_unit(i) = 'kg/m3'
	2061	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2062	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2063	dopr_initial_index(i) = 26
	2064	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	2065	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	2066	data_output_pr(i) = data_output_pr(i)(2:)
	2067	ENDIF
	2068	ENDIF
	2069
	2070	CASE ( 'qv', '#qv' )
	2071	IF ( .NOT. cloud_physics ) THEN
	2072	dopr_index(i) = 41
[87]	2073	dopr_unit(i) = 'kg/kg'
	2074	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2075	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2076	dopr_initial_index(i) = 26
	2077	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	2078	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	2079	data_output_pr(i) = data_output_pr(i)(2:)
	2080	ENDIF
	2081	ELSE
	2082	dopr_index(i) = 42
[87]	2083	dopr_unit(i) = 'kg/kg'
	2084	hom(:,2,42,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2085	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2086	dopr_initial_index(i) = 27
	2087	hom(:,2,27,:) = SPREAD( zu, 2, statistic_regions+1 )
	2088	hom(nzb,2,27,:) = 0.0 ! weil zu(nzb) negativ ist
	2089	data_output_pr(i) = data_output_pr(i)(2:)
	2090	ENDIF
	2091	ENDIF
	2092
	2093	CASE ( 'lpt', '#lpt' )
	2094	IF ( .NOT. cloud_physics ) THEN
[215]	2095	message_string = 'data_output_pr = ' // &
	2096	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2097	'lemented for cloud_physics = .FALSE.'
[226]	2098	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
[1]	2099	ELSE
	2100	dopr_index(i) = 4
[87]	2101	dopr_unit(i) = 'K'
[1]	2102	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
	2103	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2104	dopr_initial_index(i) = 7
	2105	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
	2106	hom(nzb,2,7,:) = 0.0 ! weil zu(nzb) negativ ist
	2107	data_output_pr(i) = data_output_pr(i)(2:)
	2108	ENDIF
	2109	ENDIF
	2110
	2111	CASE ( 'vpt', '#vpt' )
	2112	dopr_index(i) = 44
[87]	2113	dopr_unit(i) = 'K'
	2114	hom(:,2,44,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2115	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2116	dopr_initial_index(i) = 29
	2117	hom(:,2,29,:) = SPREAD( zu, 2, statistic_regions+1 )
	2118	hom(nzb,2,29,:) = 0.0 ! weil zu(nzb) negativ ist
	2119	data_output_pr(i) = data_output_pr(i)(2:)
	2120	ENDIF
	2121
	2122	CASE ( 'w"vpt"' )
	2123	dopr_index(i) = 45
[87]	2124	dopr_unit(i) = 'K m/s'
[1]	2125	hom(:,2,45,:) = SPREAD( zw, 2, statistic_regions+1 )
	2126
	2127	CASE ( 'wvpt' )
	2128	dopr_index(i) = 46
[87]	2129	dopr_unit(i) = 'K m/s'
[1]	2130	hom(:,2,46,:) = SPREAD( zw, 2, statistic_regions+1 )
	2131
	2132	CASE ( 'wvpt' )
	2133	dopr_index(i) = 47
[87]	2134	dopr_unit(i) = 'K m/s'
[1]	2135	hom(:,2,47,:) = SPREAD( zw, 2, statistic_regions+1 )
	2136
	2137	CASE ( 'w"q"' )
[108]	2138	IF ( .NOT. humidity ) THEN
[215]	2139	message_string = 'data_output_pr = ' // &
	2140	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2141	'lemented for humidity = .FALSE.'
[226]	2142	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	2143	ELSE
	2144	dopr_index(i) = 48
[87]	2145	dopr_unit(i) = 'kg/kg m/s'
[1]	2146	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
	2147	ENDIF
	2148
	2149	CASE ( 'wq' )
[108]	2150	IF ( .NOT. humidity ) THEN
[215]	2151	message_string = 'data_output_pr = ' // &
	2152	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2153	'lemented for humidity = .FALSE.'
[226]	2154	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	2155	ELSE
	2156	dopr_index(i) = 49
[87]	2157	dopr_unit(i) = 'kg/kg m/s'
[1]	2158	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
	2159	ENDIF
	2160
	2161	CASE ( 'wq' )
[108]	2162	IF ( .NOT. humidity ) THEN
[215]	2163	message_string = 'data_output_pr = ' // &
	2164	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2165	'lemented for humidity = .FALSE.'
[226]	2166	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	2167	ELSE
	2168	dopr_index(i) = 50
[87]	2169	dopr_unit(i) = 'kg/kg m/s'
[1]	2170	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
	2171	ENDIF
	2172
	2173	CASE ( 'w"s"' )
	2174	IF ( .NOT. passive_scalar ) THEN
[215]	2175	message_string = 'data_output_pr = ' // &
	2176	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2177	'lemented for passive_scalar = .FALSE.'
[226]	2178	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	2179	ELSE
	2180	dopr_index(i) = 48
[87]	2181	dopr_unit(i) = 'kg/m3 m/s'
[1]	2182	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
	2183	ENDIF
	2184
	2185	CASE ( 'ws' )
	2186	IF ( .NOT. passive_scalar ) THEN
[215]	2187	message_string = 'data_output_pr = ' // &
	2188	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2189	'lemented for passive_scalar = .FALSE.'
[226]	2190	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	2191	ELSE
	2192	dopr_index(i) = 49
[87]	2193	dopr_unit(i) = 'kg/m3 m/s'
[1]	2194	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
	2195	ENDIF
	2196
	2197	CASE ( 'ws' )
	2198	IF ( .NOT. passive_scalar ) THEN
[215]	2199	message_string = 'data_output_pr = ' // &
	2200	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2201	'lemented for passive_scalar = .FALSE.'
[226]	2202	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	2203	ELSE
	2204	dopr_index(i) = 50
[87]	2205	dopr_unit(i) = 'kg/m3 m/s'
[1]	2206	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
	2207	ENDIF
	2208
	2209	CASE ( 'w"qv"' )
[75]	2210	IF ( humidity .AND. .NOT. cloud_physics ) &
[1]	2211	THEN
	2212	dopr_index(i) = 48
[87]	2213	dopr_unit(i) = 'kg/kg m/s'
[1]	2214	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
[75]	2215	ELSEIF( humidity .AND. cloud_physics ) THEN
[1]	2216	dopr_index(i) = 51
[87]	2217	dopr_unit(i) = 'kg/kg m/s'
[1]	2218	hom(:,2,51,:) = SPREAD( zw, 2, statistic_regions+1 )
	2219	ELSE
[215]	2220	message_string = 'data_output_pr = ' // &
	2221	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2222	'lemented for cloud_physics = .FALSE. an&' // &
	2223	'd humidity = .FALSE.'
[226]	2224	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
[1]	2225	ENDIF
	2226
	2227	CASE ( 'wqv' )
[75]	2228	IF ( humidity .AND. .NOT. cloud_physics ) &
[1]	2229	THEN
	2230	dopr_index(i) = 49
[87]	2231	dopr_unit(i) = 'kg/kg m/s'
[1]	2232	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
[75]	2233	ELSEIF( humidity .AND. cloud_physics ) THEN
[1]	2234	dopr_index(i) = 52
[87]	2235	dopr_unit(i) = 'kg/kg m/s'
[1]	2236	hom(:,2,52,:) = SPREAD( zw, 2, statistic_regions+1 )
	2237	ELSE
[215]	2238	message_string = 'data_output_pr = ' // &
	2239	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2240	'lemented for cloud_physics = .FALSE. an&' // &
	2241	'd humidity = .FALSE.'
[226]	2242	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
[1]	2243	ENDIF
	2244
	2245	CASE ( 'wqv' )
[75]	2246	IF ( humidity .AND. .NOT. cloud_physics ) &
[1]	2247	THEN
	2248	dopr_index(i) = 50
[87]	2249	dopr_unit(i) = 'kg/kg m/s'
[1]	2250	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
[75]	2251	ELSEIF( humidity .AND. cloud_physics ) THEN
[1]	2252	dopr_index(i) = 53
[87]	2253	dopr_unit(i) = 'kg/kg m/s'
[1]	2254	hom(:,2,53,:) = SPREAD( zw, 2, statistic_regions+1 )
	2255	ELSE
[215]	2256	message_string = 'data_output_pr = ' // &
	2257	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2258	'lemented for cloud_physics = .FALSE. an&' // &
	2259	'd humidity = .FALSE.'
[226]	2260	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
[1]	2261	ENDIF
	2262
	2263	CASE ( 'ql' )
	2264	IF ( .NOT. cloud_physics .AND. .NOT. cloud_droplets ) THEN
[215]	2265	message_string = 'data_output_pr = ' // &
	2266	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2267	'lemented for cloud_physics = .FALSE. or' // &
	2268	'&cloud_droplets = .FALSE.'
[226]	2269	CALL message( 'check_parameters', 'PA0096', 1, 2, 0, 6, 0 )
[1]	2270	ELSE
	2271	dopr_index(i) = 54
[87]	2272	dopr_unit(i) = 'kg/kg'
[1]	2273	hom(:,2,54,:) = SPREAD( zu, 2, statistic_regions+1 )
	2274	ENDIF
	2275
[524]	2276	CASE ( 'wuu*:dz' )
[1]	2277	dopr_index(i) = 55
[87]	2278	dopr_unit(i) = 'm2/s3'
[1]	2279	hom(:,2,55,:) = SPREAD( zu, 2, statistic_regions+1 )
	2280
[524]	2281	CASE ( 'wp:dz' )
[1]	2282	dopr_index(i) = 56
[87]	2283	dopr_unit(i) = 'm2/s3'
[106]	2284	hom(:,2,56,:) = SPREAD( zw, 2, statistic_regions+1 )
[1]	2285
[524]	2286	CASE ( 'w"e:dz' )
[1]	2287	dopr_index(i) = 57
[87]	2288	dopr_unit(i) = 'm2/s3'
[1]	2289	hom(:,2,57,:) = SPREAD( zu, 2, statistic_regions+1 )
	2290
[667]	2291
[1]	2292	CASE ( 'u"pt"' )
	2293	dopr_index(i) = 58
[87]	2294	dopr_unit(i) = 'K m/s'
[1]	2295	hom(:,2,58,:) = SPREAD( zu, 2, statistic_regions+1 )
	2296
	2297	CASE ( 'upt' )
	2298	dopr_index(i) = 59
[87]	2299	dopr_unit(i) = 'K m/s'
[1]	2300	hom(:,2,59,:) = SPREAD( zu, 2, statistic_regions+1 )
	2301
	2302	CASE ( 'upt_t' )
	2303	dopr_index(i) = 60
[87]	2304	dopr_unit(i) = 'K m/s'
[1]	2305	hom(:,2,60,:) = SPREAD( zu, 2, statistic_regions+1 )
	2306
	2307	CASE ( 'v"pt"' )
	2308	dopr_index(i) = 61
[87]	2309	dopr_unit(i) = 'K m/s'
[1]	2310	hom(:,2,61,:) = SPREAD( zu, 2, statistic_regions+1 )
	2311
	2312	CASE ( 'vpt' )
	2313	dopr_index(i) = 62
[87]	2314	dopr_unit(i) = 'K m/s'
[1]	2315	hom(:,2,62,:) = SPREAD( zu, 2, statistic_regions+1 )
	2316
	2317	CASE ( 'vpt_t' )
	2318	dopr_index(i) = 63
[87]	2319	dopr_unit(i) = 'K m/s'
[1]	2320	hom(:,2,63,:) = SPREAD( zu, 2, statistic_regions+1 )
	2321
[96]	2322	CASE ( 'rho' )
[388]	2323	IF ( .NOT. ocean ) THEN
	2324	message_string = 'data_output_pr = ' // &
	2325	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2326	'lemented for ocean = .FALSE.'
	2327	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
	2328	ELSE
	2329	dopr_index(i) = 64
	2330	dopr_unit(i) = 'kg/m3'
	2331	hom(:,2,64,:) = SPREAD( zu, 2, statistic_regions+1 )
	2332	ENDIF
[1]	2333
[96]	2334	CASE ( 'w"sa"' )
	2335	IF ( .NOT. ocean ) THEN
[215]	2336	message_string = 'data_output_pr = ' // &
	2337	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2338	'lemented for ocean = .FALSE.'
[226]	2339	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2340	ELSE
	2341	dopr_index(i) = 65
	2342	dopr_unit(i) = 'psu m/s'
	2343	hom(:,2,65,:) = SPREAD( zw, 2, statistic_regions+1 )
	2344	ENDIF
	2345
	2346	CASE ( 'wsa' )
	2347	IF ( .NOT. ocean ) THEN
[215]	2348	message_string = 'data_output_pr = ' // &
	2349	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2350	'lemented for ocean = .FALSE.'
[226]	2351	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2352	ELSE
	2353	dopr_index(i) = 66
	2354	dopr_unit(i) = 'psu m/s'
	2355	hom(:,2,66,:) = SPREAD( zw, 2, statistic_regions+1 )
	2356	ENDIF
	2357
	2358	CASE ( 'wsa' )
	2359	IF ( .NOT. ocean ) THEN
[215]	2360	message_string = 'data_output_pr = ' // &
	2361	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2362	'lemented for ocean = .FALSE.'
[226]	2363	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2364	ELSE
	2365	dopr_index(i) = 67
	2366	dopr_unit(i) = 'psu m/s'
	2367	hom(:,2,67,:) = SPREAD( zw, 2, statistic_regions+1 )
	2368	ENDIF
	2369
[106]	2370	CASE ( 'wp' )
	2371	dopr_index(i) = 68
	2372	dopr_unit(i) = 'm3/s3'
	2373	hom(:,2,68,:) = SPREAD( zu, 2, statistic_regions+1 )
[96]	2374
[106]	2375	CASE ( 'w"e' )
	2376	dopr_index(i) = 69
	2377	dopr_unit(i) = 'm3/s3'
	2378	hom(:,2,69,:) = SPREAD( zu, 2, statistic_regions+1 )
	2379
[197]	2380	CASE ( 'q*2' )
	2381	IF ( .NOT. humidity ) THEN
[215]	2382	message_string = 'data_output_pr = ' // &
	2383	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2384	'lemented for humidity = .FALSE.'
[226]	2385	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[197]	2386	ELSE
	2387	dopr_index(i) = 70
	2388	dopr_unit(i) = 'kg2/kg2'
	2389	hom(:,2,70,:) = SPREAD( zu, 2, statistic_regions+1 )
	2390	ENDIF
[106]	2391
[388]	2392	CASE ( 'prho' )
	2393	IF ( .NOT. ocean ) THEN
	2394	message_string = 'data_output_pr = ' // &
	2395	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2396	'lemented for ocean = .FALSE.'
	2397	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
	2398	ELSE
	2399	dopr_index(i) = 71
	2400	dopr_unit(i) = 'kg/m3'
	2401	hom(:,2,71,:) = SPREAD( zu, 2, statistic_regions+1 )
	2402	ENDIF
	2403
	2404	CASE ( 'hyp' )
	2405	dopr_index(i) = 72
[531]	2406	dopr_unit(i) = 'dbar'
[388]	2407	hom(:,2,72,:) = SPREAD( zu, 2, statistic_regions+1 )
	2408
[1]	2409	CASE DEFAULT
[87]	2410
	2411	CALL user_check_data_output_pr( data_output_pr(i), i, unit )
	2412
	2413	IF ( unit == 'illegal' ) THEN
[215]	2414	IF ( data_output_pr_user(1) /= ' ' ) THEN
	2415	message_string = 'illegal value for data_output_pr or ' // &
	2416	'data_output_pr_user = "' // &
	2417	TRIM( data_output_pr(i) ) // '"'
[226]	2418	CALL message( 'check_parameters', 'PA0097', 1, 2, 0, 6, 0 )
[215]	2419	ELSE
	2420	message_string = 'illegal value for data_output_pr = "' // &
	2421	TRIM( data_output_pr(i) ) // '"'
[226]	2422	CALL message( 'check_parameters', 'PA0098', 1, 2, 0, 6, 0 )
[87]	2423	ENDIF
[1]	2424	ENDIF
	2425
	2426	END SELECT
[667]	2427
[1]	2428	!
	2429	!-- Check to which of the predefined coordinate systems the profile belongs
	2430	DO k = 1, crmax
	2431	IF ( INDEX( cross_profiles(k), ' '//TRIM( data_output_pr(i) )//' ' ) &
	2432	/=0 ) &
	2433	THEN
	2434	dopr_crossindex(i) = k
	2435	EXIT
	2436	ENDIF
	2437	ENDDO
	2438	!
	2439	!-- Generate the text for the labels of the PROFIL output file. "-characters
	2440	!-- must be substituted, otherwise PROFIL would interpret them as TeX
	2441	!-- control characters
	2442	dopr_label(i) = data_output_pr(i)
	2443	position = INDEX( dopr_label(i) , '"' )
	2444	DO WHILE ( position /= 0 )
	2445	dopr_label(i)(position:position) = ''''
	2446	position = INDEX( dopr_label(i) , '"' )
	2447	ENDDO
	2448
	2449	ENDDO
	2450
	2451	!
	2452	!-- y-value range of the coordinate system (PROFIL).
	2453	!-- x-value range determined in plot_1d.
[94]	2454	IF ( .NOT. ocean ) THEN
	2455	cross_uymin = 0.0
	2456	IF ( z_max_do1d == -1.0 ) THEN
	2457	cross_uymax = zu(nzt+1)
	2458	ELSEIF ( z_max_do1d < zu(nzb+1) .OR. z_max_do1d > zu(nzt+1) ) THEN
[215]	2459	WRITE( message_string, * ) 'z_max_do1d = ', z_max_do1d, ' must ', &
	2460	'be >= ', zu(nzb+1), ' or <= ', zu(nzt+1)
[226]	2461	CALL message( 'check_parameters', 'PA0099', 1, 2, 0, 6, 0 )
[94]	2462	ELSE
	2463	cross_uymax = z_max_do1d
	2464	ENDIF
[1]	2465	ENDIF
	2466
	2467	!
	2468	!-- Check whether the chosen normalizing factor for the coordinate systems is
	2469	!-- permissible
	2470	DO i = 1, crmax
	2471	SELECT CASE ( TRIM( cross_normalized_x(i) ) ) ! TRIM required on IBM
	2472
	2473	CASE ( '', 'wpt0', 'ws2', 'tsw2', 'ws3', 'ws2tsw', 'wstsw2' )
	2474	j = 0
	2475
	2476	CASE DEFAULT
[215]	2477	message_string = 'unknown normalization method cross_normali' // &
	2478	'zed_x = "' // TRIM( cross_normalized_x(i) ) // &
	2479	'"'
[226]	2480	CALL message( 'check_parameters', 'PA0100', 1, 2, 0, 6, 0 )
[1]	2481
	2482	END SELECT
	2483	SELECT CASE ( TRIM( cross_normalized_y(i) ) ) ! TRIM required on IBM
	2484
	2485	CASE ( '', 'z_i' )
	2486	j = 0
	2487
	2488	CASE DEFAULT
[215]	2489	message_string = 'unknown normalization method cross_normali' // &
	2490	'zed_y = "' // TRIM( cross_normalized_y(i) ) // &
	2491	'"'
[226]	2492	CALL message( 'check_parameters', 'PA0101', 1, 2, 0, 6, 0 )
[1]	2493
	2494	END SELECT
	2495	ENDDO
	2496	!
	2497	!-- Check normalized y-value range of the coordinate system (PROFIL)
	2498	IF ( z_max_do1d_normalized /= -1.0 .AND. z_max_do1d_normalized <= 0.0 ) &
	2499	THEN
[215]	2500	WRITE( message_string, * ) 'z_max_do1d_normalized = ', &
	2501	z_max_do1d_normalized, ' must be >= 0.0'
[226]	2502	CALL message( 'check_parameters', 'PA0101', 1, 2, 0, 6, 0 )
[1]	2503	ENDIF
	2504
	2505
	2506	!
	2507	!-- Append user-defined data output variables to the standard data output
	2508	IF ( data_output_user(1) /= ' ' ) THEN
	2509	i = 1
	2510	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
	2511	i = i + 1
	2512	ENDDO
	2513	j = 1
	2514	DO WHILE ( data_output_user(j) /= ' ' .AND. j <= 100 )
	2515	IF ( i > 100 ) THEN
[215]	2516	message_string = 'number of output quantitities given by data' // &
	2517	'_output and data_output_user exceeds the limit of 100'
[226]	2518	CALL message( 'check_parameters', 'PA0102', 1, 2, 0, 6, 0 )
[1]	2519	ENDIF
	2520	data_output(i) = data_output_user(j)
	2521	i = i + 1
	2522	j = j + 1
	2523	ENDDO
	2524	ENDIF
	2525
	2526	!
	2527	!-- Check and set steering parameters for 2d/3d data output and averaging
	2528	i = 1
	2529	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
	2530	!
	2531	!-- Check for data averaging
	2532	ilen = LEN_TRIM( data_output(i) )
	2533	j = 0 ! no data averaging
	2534	IF ( ilen > 3 ) THEN
	2535	IF ( data_output(i)(ilen-2:ilen) == '_av' ) THEN
	2536	j = 1 ! data averaging
	2537	data_output(i) = data_output(i)(1:ilen-3)
	2538	ENDIF
	2539	ENDIF
	2540	!
	2541	!-- Check for cross section or volume data
	2542	ilen = LEN_TRIM( data_output(i) )
	2543	k = 0 ! 3d data
	2544	var = data_output(i)(1:ilen)
	2545	IF ( ilen > 3 ) THEN
	2546	IF ( data_output(i)(ilen-2:ilen) == '_xy' .OR. &
	2547	data_output(i)(ilen-2:ilen) == '_xz' .OR. &
	2548	data_output(i)(ilen-2:ilen) == '_yz' ) THEN
	2549	k = 1 ! 2d data
	2550	var = data_output(i)(1:ilen-3)
	2551	ENDIF
	2552	ENDIF
	2553	!
	2554	!-- Check for allowed value and set units
	2555	SELECT CASE ( TRIM( var ) )
	2556
	2557	CASE ( 'e' )
	2558	IF ( constant_diffusion ) THEN
[215]	2559	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2560	'res constant_diffusion = .FALSE.'
[226]	2561	CALL message( 'check_parameters', 'PA0103', 1, 2, 0, 6, 0 )
[1]	2562	ENDIF
	2563	unit = 'm2/s2'
	2564
[771]	2565	CASE ( 'lpt' )
	2566	IF ( .NOT. cloud_physics ) THEN
	2567	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2568	'res cloud_physics = .TRUE. or cloud_droplets = .TRUE.'
	2569	CALL message( 'check_parameters', 'PA0347', 1, 2, 0, 6, 0 )
	2570	ENDIF
	2571	unit = 'K'
	2572
[1]	2573	CASE ( 'pc', 'pr' )
	2574	IF ( .NOT. particle_advection ) THEN
[215]	2575	message_string = 'output of "' // TRIM( var ) // '" requir' // &
	2576	'es a "particles_par"-NAMELIST in the parameter file (PARIN)'
[226]	2577	CALL message( 'check_parameters', 'PA0104', 1, 2, 0, 6, 0 )
[1]	2578	ENDIF
	2579	IF ( TRIM( var ) == 'pc' ) unit = 'number'
	2580	IF ( TRIM( var ) == 'pr' ) unit = 'm'
	2581
	2582	CASE ( 'q', 'vpt' )
[75]	2583	IF ( .NOT. humidity ) THEN
[215]	2584	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2585	'res humidity = .TRUE.'
[226]	2586	CALL message( 'check_parameters', 'PA0105', 1, 2, 0, 6, 0 )
[1]	2587	ENDIF
	2588	IF ( TRIM( var ) == 'q' ) unit = 'kg/kg'
	2589	IF ( TRIM( var ) == 'vpt' ) unit = 'K'
	2590
	2591	CASE ( 'ql' )
	2592	IF ( .NOT. ( cloud_physics .OR. cloud_droplets ) ) THEN
[215]	2593	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2594	'res cloud_physics = .TRUE. or cloud_droplets = .TRUE.'
[226]	2595	CALL message( 'check_parameters', 'PA0106', 1, 2, 0, 6, 0 )
[1]	2596	ENDIF
	2597	unit = 'kg/kg'
	2598
	2599	CASE ( 'ql_c', 'ql_v', 'ql_vp' )
	2600	IF ( .NOT. cloud_droplets ) THEN
[215]	2601	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2602	'res cloud_droplets = .TRUE.'
[226]	2603	CALL message( 'check_parameters', 'PA0107', 1, 2, 0, 6, 0 )
[1]	2604	ENDIF
	2605	IF ( TRIM( var ) == 'ql_c' ) unit = 'kg/kg'
	2606	IF ( TRIM( var ) == 'ql_v' ) unit = 'm3'
	2607	IF ( TRIM( var ) == 'ql_vp' ) unit = 'none'
	2608
	2609	CASE ( 'qv' )
	2610	IF ( .NOT. cloud_physics ) THEN
[215]	2611	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2612	'res cloud_physics = .TRUE.'
[226]	2613	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
[1]	2614	ENDIF
	2615	unit = 'kg/kg'
	2616
[96]	2617	CASE ( 'rho' )
	2618	IF ( .NOT. ocean ) THEN
[215]	2619	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2620	'res ocean = .TRUE.'
[226]	2621	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
[96]	2622	ENDIF
	2623	unit = 'kg/m3'
	2624
[1]	2625	CASE ( 's' )
	2626	IF ( .NOT. passive_scalar ) THEN
[215]	2627	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2628	'res passive_scalar = .TRUE.'
[226]	2629	CALL message( 'check_parameters', 'PA0110', 1, 2, 0, 6, 0 )
[1]	2630	ENDIF
	2631	unit = 'conc'
	2632
[96]	2633	CASE ( 'sa' )
	2634	IF ( .NOT. ocean ) THEN
[215]	2635	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2636	'res ocean = .TRUE.'
[226]	2637	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
[96]	2638	ENDIF
	2639	unit = 'psu'
	2640
[354]	2641	CASE ( 'u', 't', 'lwp', 'pra', 'prr', 'qsws', 'shf', 'z0' )
[1]	2642	IF ( k == 0 .OR. data_output(i)(ilen-2:ilen) /= '_xy' ) THEN
[215]	2643	message_string = 'illegal value for data_output: "' // &
	2644	TRIM( var ) // '" & only 2d-horizontal ' // &
	2645	'cross sections are allowed for this value'
[226]	2646	CALL message( 'check_parameters', 'PA0111', 1, 2, 0, 6, 0 )
[1]	2647	ENDIF
	2648	IF ( TRIM( var ) == 'lwp*' .AND. .NOT. cloud_physics ) THEN
[215]	2649	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2650	'res cloud_physics = .TRUE.'
[226]	2651	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
[1]	2652	ENDIF
[72]	2653	IF ( TRIM( var ) == 'pra*' .AND. .NOT. precipitation ) THEN
[215]	2654	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2655	'res precipitation = .TRUE.'
[226]	2656	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
[72]	2657	ENDIF
	2658	IF ( TRIM( var ) == 'pra*' .AND. j == 1 ) THEN
[215]	2659	message_string = 'temporal averaging of precipitation ' // &
	2660	'amount "' // TRIM( var ) // '" is not possible'
[226]	2661	CALL message( 'check_parameters', 'PA0113', 1, 2, 0, 6, 0 )
[72]	2662	ENDIF
	2663	IF ( TRIM( var ) == 'prr*' .AND. .NOT. precipitation ) THEN
[215]	2664	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2665	'res precipitation = .TRUE.'
[226]	2666	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
[72]	2667	ENDIF
[354]	2668	IF ( TRIM( var ) == 'qsws*' .AND. .NOT. humidity ) THEN
	2669	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2670	'res humidity = .TRUE.'
	2671	CALL message( 'check_parameters', 'PA0322', 1, 2, 0, 6, 0 )
	2672	ENDIF
[72]	2673
[354]	2674	IF ( TRIM( var ) == 'lwp' ) unit = 'kg/kgm'
	2675	IF ( TRIM( var ) == 'pra*' ) unit = 'mm'
	2676	IF ( TRIM( var ) == 'prr*' ) unit = 'mm/s'
	2677	IF ( TRIM( var ) == 'qsws*' ) unit = 'kgm/kgs'
	2678	IF ( TRIM( var ) == 'shf' ) unit = 'Km/s'
	2679	IF ( TRIM( var ) == 't*' ) unit = 'K'
	2680	IF ( TRIM( var ) == 'u*' ) unit = 'm/s'
	2681	IF ( TRIM( var ) == 'z0*' ) unit = 'm'
[72]	2682
[1]	2683
	2684	CASE ( 'p', 'pt', 'u', 'v', 'w' )
	2685	IF ( TRIM( var ) == 'p' ) unit = 'Pa'
	2686	IF ( TRIM( var ) == 'pt' ) unit = 'K'
	2687	IF ( TRIM( var ) == 'u' ) unit = 'm/s'
	2688	IF ( TRIM( var ) == 'v' ) unit = 'm/s'
	2689	IF ( TRIM( var ) == 'w' ) unit = 'm/s'
	2690	CONTINUE
	2691
	2692	CASE DEFAULT
	2693	CALL user_check_data_output( var, unit )
	2694
	2695	IF ( unit == 'illegal' ) THEN
[215]	2696	IF ( data_output_user(1) /= ' ' ) THEN
	2697	message_string = 'illegal value for data_output or ' // &
	2698	'data_output_user = "' // TRIM( data_output(i) ) // '"'
[226]	2699	CALL message( 'check_parameters', 'PA0114', 1, 2, 0, 6, 0 )
[215]	2700	ELSE
	2701	message_string = 'illegal value for data_output =' // &
	2702	TRIM( data_output(i) ) // '"'
[226]	2703	CALL message( 'check_parameters', 'PA0115', 1, 2, 0, 6, 0 )
[1]	2704	ENDIF
	2705	ENDIF
	2706
	2707	END SELECT
	2708	!
	2709	!-- Set the internal steering parameters appropriately
	2710	IF ( k == 0 ) THEN
	2711	do3d_no(j) = do3d_no(j) + 1
	2712	do3d(j,do3d_no(j)) = data_output(i)
	2713	do3d_unit(j,do3d_no(j)) = unit
	2714	ELSE
	2715	do2d_no(j) = do2d_no(j) + 1
	2716	do2d(j,do2d_no(j)) = data_output(i)
	2717	do2d_unit(j,do2d_no(j)) = unit
	2718	IF ( data_output(i)(ilen-2:ilen) == '_xy' ) THEN
	2719	data_output_xy(j) = .TRUE.
	2720	ENDIF
	2721	IF ( data_output(i)(ilen-2:ilen) == '_xz' ) THEN
	2722	data_output_xz(j) = .TRUE.
	2723	ENDIF
	2724	IF ( data_output(i)(ilen-2:ilen) == '_yz' ) THEN
	2725	data_output_yz(j) = .TRUE.
	2726	ENDIF
	2727	ENDIF
	2728
	2729	IF ( j == 1 ) THEN
	2730	!
	2731	!-- Check, if variable is already subject to averaging
	2732	found = .FALSE.
	2733	DO k = 1, doav_n
	2734	IF ( TRIM( doav(k) ) == TRIM( var ) ) found = .TRUE.
	2735	ENDDO
	2736
	2737	IF ( .NOT. found ) THEN
	2738	doav_n = doav_n + 1
	2739	doav(doav_n) = var
	2740	ENDIF
	2741	ENDIF
	2742
	2743	i = i + 1
	2744	ENDDO
	2745
	2746	!
[376]	2747	!-- Averaged 2d or 3d output requires that an averaging interval has been set
	2748	IF ( doav_n > 0 .AND. averaging_interval == 0.0 ) THEN
	2749	WRITE( message_string, * ) 'output of averaged quantity "', &
	2750	TRIM( doav(1) ), '_av" requires to set a ', &
	2751	'non-zero & averaging interval'
	2752	CALL message( 'check_parameters', 'PA0323', 1, 2, 0, 6, 0 )
	2753	ENDIF
	2754
	2755	!
[308]	2756	!-- Check sectional planes and store them in one shared array
	2757	IF ( ANY( section_xy > nz + 1 ) ) THEN
	2758	WRITE( message_string, * ) 'section_xy must be <= nz + 1 = ', nz + 1
	2759	CALL message( 'check_parameters', 'PA0319', 1, 2, 0, 6, 0 )
	2760	ENDIF
	2761	IF ( ANY( section_xz > ny + 1 ) ) THEN
	2762	WRITE( message_string, * ) 'section_xz must be <= ny + 1 = ', ny + 1
	2763	CALL message( 'check_parameters', 'PA0320', 1, 2, 0, 6, 0 )
	2764	ENDIF
	2765	IF ( ANY( section_yz > nx + 1 ) ) THEN
	2766	WRITE( message_string, * ) 'section_yz must be <= nx + 1 = ', nx + 1
	2767	CALL message( 'check_parameters', 'PA0321', 1, 2, 0, 6, 0 )
	2768	ENDIF
[1]	2769	section(:,1) = section_xy
	2770	section(:,2) = section_xz
	2771	section(:,3) = section_yz
	2772
	2773	!
	2774	!-- Upper plot limit (grid point value) for 1D profiles
	2775	IF ( z_max_do1d == -1.0 ) THEN
[667]	2776
[1]	2777	nz_do1d = nzt+1
[667]	2778
[1]	2779	ELSE
	2780	DO k = nzb+1, nzt+1
	2781	nz_do1d = k
	2782	IF ( zw(k) > z_max_do1d ) EXIT
	2783	ENDDO
	2784	ENDIF
	2785
	2786	!
	2787	!-- Upper plot limit for 2D vertical sections
	2788	IF ( z_max_do2d == -1.0 ) z_max_do2d = zu(nzt)
	2789	IF ( z_max_do2d < zu(nzb+1) .OR. z_max_do2d > zu(nzt) ) THEN
[215]	2790	WRITE( message_string, * ) 'z_max_do2d = ', z_max_do2d, &
	2791	' must be >= ', zu(nzb+1), '(zu(nzb+1)) and <= ', zu(nzt), &
	2792	' (zu(nzt))'
[226]	2793	CALL message( 'check_parameters', 'PA0116', 1, 2, 0, 6, 0 )
[1]	2794	ENDIF
	2795
	2796	!
	2797	!-- Upper plot limit for 3D arrays
	2798	IF ( nz_do3d == -9999 ) nz_do3d = nzt + 1
	2799
	2800	!
	2801	!-- Determine and check accuracy for compressed 3D plot output
	2802	IF ( do3d_compress ) THEN
	2803	!
	2804	!-- Compression only permissible on T3E machines
	2805	IF ( host(1:3) /= 't3e' ) THEN
[215]	2806	message_string = 'do3d_compress = .TRUE. not allowed on host "' // &
	2807	TRIM( host ) // '"'
[226]	2808	CALL message( 'check_parameters', 'PA0117', 1, 2, 0, 6, 0 )
[1]	2809	ENDIF
	2810
	2811	i = 1
	2812	DO WHILE ( do3d_comp_prec(i) /= ' ' )
	2813
	2814	ilen = LEN_TRIM( do3d_comp_prec(i) )
	2815	IF ( LLT( do3d_comp_prec(i)(ilen:ilen), '0' ) .OR. &
	2816	LGT( do3d_comp_prec(i)(ilen:ilen), '9' ) ) THEN
[215]	2817	WRITE( message_string, * ) 'illegal precision: do3d_comp_prec', &
	2818	'(', i, ') = "', TRIM(do3d_comp_prec(i)),'"'
[226]	2819	CALL message( 'check_parameters', 'PA0118', 1, 2, 0, 6, 0 )
[1]	2820	ENDIF
	2821
	2822	prec = IACHAR( do3d_comp_prec(i)(ilen:ilen) ) - IACHAR( '0' )
	2823	var = do3d_comp_prec(i)(1:ilen-1)
	2824
	2825	SELECT CASE ( var )
	2826
	2827	CASE ( 'u' )
	2828	j = 1
	2829	CASE ( 'v' )
	2830	j = 2
	2831	CASE ( 'w' )
	2832	j = 3
	2833	CASE ( 'p' )
	2834	j = 4
	2835	CASE ( 'pt' )
	2836	j = 5
	2837
	2838	CASE DEFAULT
[215]	2839	WRITE( message_string, * ) 'unknown variable "', &
	2840	TRIM( do3d_comp_prec(i) ), '" given for do3d_comp_prec(', &
	2841	i, ')'
[226]	2842	CALL message( 'check_parameters', 'PA0119', 1, 2, 0, 6, 0 )
[1]	2843
	2844	END SELECT
	2845
	2846	plot_3d_precision(j)%precision = prec
	2847	i = i + 1
	2848
	2849	ENDDO
	2850	ENDIF
	2851
	2852	!
	2853	!-- Check the data output format(s)
	2854	IF ( data_output_format(1) == ' ' ) THEN
	2855	!
	2856	!-- Default value
	2857	netcdf_output = .TRUE.
	2858	ELSE
	2859	i = 1
	2860	DO WHILE ( data_output_format(i) /= ' ' )
	2861
	2862	SELECT CASE ( data_output_format(i) )
	2863
	2864	CASE ( 'netcdf' )
	2865	netcdf_output = .TRUE.
	2866	CASE ( 'iso2d' )
	2867	iso2d_output = .TRUE.
	2868	CASE ( 'profil' )
	2869	profil_output = .TRUE.
	2870	CASE ( 'avs' )
	2871	avs_output = .TRUE.
	2872
	2873	CASE DEFAULT
[215]	2874	message_string = 'unknown value for data_output_format "' // &
	2875	TRIM( data_output_format(i) ) // '"'
[226]	2876	CALL message( 'check_parameters', 'PA0120', 1, 2, 0, 6, 0 )
[1]	2877
	2878	END SELECT
	2879
	2880	i = i + 1
	2881	IF ( i > 10 ) EXIT
	2882
	2883	ENDDO
	2884
	2885	ENDIF
	2886
	2887	!
[410]	2888	!-- Check mask conditions
[553]	2889	DO mid = 1, max_masks
[567]	2890	IF ( data_output_masks(mid,1) /= ' ' .OR. &
	2891	data_output_masks_user(mid,1) /= ' ' ) THEN
[553]	2892	masks = masks + 1
	2893	ENDIF
	2894	ENDDO
	2895
[410]	2896	IF ( masks < 0 .OR. masks > max_masks ) THEN
	2897	WRITE( message_string, * ) 'illegal value: masks must be >= 0 and ', &
	2898	'<= ', max_masks, ' (=max_masks)'
[564]	2899	CALL message( 'check_parameters', 'PA0325', 1, 2, 0, 6, 0 )
[410]	2900	ENDIF
	2901	IF ( masks > 0 ) THEN
	2902	mask_scale(1) = mask_scale_x
	2903	mask_scale(2) = mask_scale_y
	2904	mask_scale(3) = mask_scale_z
	2905	IF ( ANY( mask_scale <= 0.0 ) ) THEN
	2906	WRITE( message_string, * ) &
	2907	'illegal value: mask_scale_x, mask_scale_y and mask_scale_z', &
	2908	'must be > 0.0'
[564]	2909	CALL message( 'check_parameters', 'PA0326', 1, 2, 0, 6, 0 )
[410]	2910	ENDIF
	2911	!
	2912	!-- Generate masks for masked data output
	2913	CALL init_masks
	2914	ENDIF
	2915
	2916	!
[493]	2917	!-- Check the NetCDF data format
	2918	IF ( netcdf_data_format > 2 ) THEN
	2919	#if defined( __netcdf4 )
	2920	CONTINUE
	2921	#else
	2922	message_string = 'NetCDF: NetCDF4 format requested but no ' // &
	2923	'cpp-directive __netcdf4 given & switch ' // &
	2924	'back to 64-bit offset format'
	2925	CALL message( 'check_parameters', 'PA0171', 0, 1, 0, 6, 0 )
	2926	netcdf_data_format = 2
	2927	#endif
	2928	ENDIF
	2929
	2930	!
[667]	2931
[1]	2932	!-- Check netcdf precison
	2933	ldum = .FALSE.
	2934	CALL define_netcdf_header( 'ch', ldum, 0 )
	2935
	2936	!
	2937	!-- Check, whether a constant diffusion coefficient shall be used
	2938	IF ( km_constant /= -1.0 ) THEN
	2939	IF ( km_constant < 0.0 ) THEN
[215]	2940	WRITE( message_string, * ) 'km_constant = ', km_constant, ' < 0.0'
[226]	2941	CALL message( 'check_parameters', 'PA0121', 1, 2, 0, 6, 0 )
[1]	2942	ELSE
	2943	IF ( prandtl_number < 0.0 ) THEN
[215]	2944	WRITE( message_string, * ) 'prandtl_number = ', prandtl_number, &
	2945	' < 0.0'
[226]	2946	CALL message( 'check_parameters', 'PA0122', 1, 2, 0, 6, 0 )
[1]	2947	ENDIF
	2948	constant_diffusion = .TRUE.
	2949
	2950	IF ( prandtl_layer ) THEN
[215]	2951	message_string = 'prandtl_layer is not allowed with fixed ' // &
	2952	'value of km'
[226]	2953	CALL message( 'check_parameters', 'PA0123', 1, 2, 0, 6, 0 )
[1]	2954	ENDIF
	2955	ENDIF
	2956	ENDIF
	2957
	2958	!
	2959	!-- In case of non-cyclic lateral boundaries, set the default maximum value
	2960	!-- for the horizontal diffusivity used within the outflow damping layer,
	2961	!-- and check/set the width of the damping layer
	2962	IF ( bc_lr /= 'cyclic' ) THEN
	2963	IF ( km_damp_max == -1.0 ) THEN
	2964	km_damp_max = 0.5 * dx
	2965	ENDIF
	2966	IF ( outflow_damping_width == -1.0 ) THEN
	2967	outflow_damping_width = MIN( 20, nx/2 )
	2968	ENDIF
	2969	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > nx ) THEN
[215]	2970	message_string = 'outflow_damping width out of range'
[226]	2971	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
[1]	2972	ENDIF
	2973	ENDIF
	2974
	2975	IF ( bc_ns /= 'cyclic' ) THEN
	2976	IF ( km_damp_max == -1.0 ) THEN
	2977	km_damp_max = 0.5 * dy
	2978	ENDIF
	2979	IF ( outflow_damping_width == -1.0 ) THEN
	2980	outflow_damping_width = MIN( 20, ny/2 )
	2981	ENDIF
	2982	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > ny ) THEN
[215]	2983	message_string = 'outflow_damping width out of range'
[226]	2984	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
[1]	2985	ENDIF
	2986	ENDIF
	2987
	2988	!
	2989	!-- Check value range for rif
	2990	IF ( rif_min >= rif_max ) THEN
[215]	2991	WRITE( message_string, * ) 'rif_min = ', rif_min, ' must be less ', &
	2992	'than rif_max = ', rif_max
[226]	2993	CALL message( 'check_parameters', 'PA0125', 1, 2, 0, 6, 0 )
[1]	2994	ENDIF
	2995
	2996	!
	2997	!-- Determine upper and lower hight level indices for random perturbations
[97]	2998	IF ( disturbance_level_b == -9999999.9 ) THEN
	2999	IF ( ocean ) THEN
	3000	disturbance_level_b = zu((nzt*2)/3)
	3001	disturbance_level_ind_b = ( nzt * 2 ) / 3
	3002	ELSE
	3003	disturbance_level_b = zu(nzb+3)
	3004	disturbance_level_ind_b = nzb + 3
	3005	ENDIF
[1]	3006	ELSEIF ( disturbance_level_b < zu(3) ) THEN
[215]	3007	WRITE( message_string, * ) 'disturbance_level_b = ', &
	3008	disturbance_level_b, ' must be >= ', zu(3), '(zu(3))'
[226]	3009	CALL message( 'check_parameters', 'PA0126', 1, 2, 0, 6, 0 )
[1]	3010	ELSEIF ( disturbance_level_b > zu(nzt-2) ) THEN
[215]	3011	WRITE( message_string, * ) 'disturbance_level_b = ', &
	3012	disturbance_level_b, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
[226]	3013	CALL message( 'check_parameters', 'PA0127', 1, 2, 0, 6, 0 )
[1]	3014	ELSE
	3015	DO k = 3, nzt-2
	3016	IF ( disturbance_level_b <= zu(k) ) THEN
	3017	disturbance_level_ind_b = k
	3018	EXIT
	3019	ENDIF
	3020	ENDDO
	3021	ENDIF
	3022
[97]	3023	IF ( disturbance_level_t == -9999999.9 ) THEN
	3024	IF ( ocean ) THEN
	3025	disturbance_level_t = zu(nzt-3)
	3026	disturbance_level_ind_t = nzt - 3
	3027	ELSE
	3028	disturbance_level_t = zu(nzt/3)
	3029	disturbance_level_ind_t = nzt / 3
	3030	ENDIF
[1]	3031	ELSEIF ( disturbance_level_t > zu(nzt-2) ) THEN
[215]	3032	WRITE( message_string, * ) 'disturbance_level_t = ', &
	3033	disturbance_level_t, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
[226]	3034	CALL message( 'check_parameters', 'PA0128', 1, 2, 0, 6, 0 )
[1]	3035	ELSEIF ( disturbance_level_t < disturbance_level_b ) THEN
[215]	3036	WRITE( message_string, * ) 'disturbance_level_t = ', &
	3037	disturbance_level_t, ' must be >= disturbance_level_b = ', &
	3038	disturbance_level_b
[226]	3039	CALL message( 'check_parameters', 'PA0129', 1, 2, 0, 6, 0 )
[1]	3040	ELSE
	3041	DO k = 3, nzt-2
	3042	IF ( disturbance_level_t <= zu(k) ) THEN
	3043	disturbance_level_ind_t = k
	3044	EXIT
	3045	ENDIF
	3046	ENDDO
	3047	ENDIF
	3048
	3049	!
	3050	!-- Check again whether the levels determined this way are ok.
	3051	!-- Error may occur at automatic determination and too few grid points in
	3052	!-- z-direction.
	3053	IF ( disturbance_level_ind_t < disturbance_level_ind_b ) THEN
[215]	3054	WRITE( message_string, * ) 'disturbance_level_ind_t = ', &
	3055	disturbance_level_ind_t, ' must be >= disturbance_level_b = ', &
	3056	disturbance_level_b
[226]	3057	CALL message( 'check_parameters', 'PA0130', 1, 2, 0, 6, 0 )
[1]	3058	ENDIF
	3059
	3060	!
	3061	!-- Determine the horizontal index range for random perturbations.
	3062	!-- In case of non-cyclic horizontal boundaries, no perturbations are imposed
	3063	!-- near the inflow and the perturbation area is further limited to ...(1)
	3064	!-- after the initial phase of the flow.
	3065	dist_nxl = 0; dist_nxr = nx
	3066	dist_nys = 0; dist_nyn = ny
	3067	IF ( bc_lr /= 'cyclic' ) THEN
	3068	IF ( inflow_disturbance_begin == -1 ) THEN
	3069	inflow_disturbance_begin = MIN( 10, nx/2 )
	3070	ENDIF
	3071	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > nx )&
	3072	THEN
[215]	3073	message_string = 'inflow_disturbance_begin out of range'
[226]	3074	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
[1]	3075	ENDIF
	3076	IF ( inflow_disturbance_end == -1 ) THEN
	3077	inflow_disturbance_end = MIN( 100, 3*nx/4 )
	3078	ENDIF
	3079	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > nx ) &
	3080	THEN
[215]	3081	message_string = 'inflow_disturbance_end out of range'
[226]	3082	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
[1]	3083	ENDIF
	3084	ELSEIF ( bc_ns /= 'cyclic' ) THEN
	3085	IF ( inflow_disturbance_begin == -1 ) THEN
	3086	inflow_disturbance_begin = MIN( 10, ny/2 )
	3087	ENDIF
	3088	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > ny )&
	3089	THEN
[215]	3090	message_string = 'inflow_disturbance_begin out of range'
[226]	3091	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
[1]	3092	ENDIF
	3093	IF ( inflow_disturbance_end == -1 ) THEN
	3094	inflow_disturbance_end = MIN( 100, 3*ny/4 )
	3095	ENDIF
	3096	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > ny ) &
	3097	THEN
[215]	3098	message_string = 'inflow_disturbance_end out of range'
[226]	3099	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
[1]	3100	ENDIF
	3101	ENDIF
	3102
[73]	3103	IF ( bc_lr == 'radiation/dirichlet' ) THEN
[1]	3104	dist_nxr = nx - inflow_disturbance_begin
	3105	dist_nxl(1) = nx - inflow_disturbance_end
[73]	3106	ELSEIF ( bc_lr == 'dirichlet/radiation' ) THEN
[1]	3107	dist_nxl = inflow_disturbance_begin
	3108	dist_nxr(1) = inflow_disturbance_end
[73]	3109	ENDIF
	3110	IF ( bc_ns == 'dirichlet/radiation' ) THEN
[1]	3111	dist_nyn = ny - inflow_disturbance_begin
	3112	dist_nys(1) = ny - inflow_disturbance_end
[73]	3113	ELSEIF ( bc_ns == 'radiation/dirichlet' ) THEN
[1]	3114	dist_nys = inflow_disturbance_begin
	3115	dist_nyn(1) = inflow_disturbance_end
	3116	ENDIF
	3117
	3118	!
[151]	3119	!-- A turbulent inflow requires Dirichlet conditions at the respective inflow
	3120	!-- boundary (so far, a turbulent inflow is realized from the left side only)
	3121	IF ( turbulent_inflow .AND. bc_lr /= 'dirichlet/radiation' ) THEN
[215]	3122	message_string = 'turbulent_inflow = .T. requires a Dirichlet ' // &
	3123	'condition at the inflow boundary'
[226]	3124	CALL message( 'check_parameters', 'PA0133', 1, 2, 0, 6, 0 )
[151]	3125	ENDIF
	3126
	3127	!
	3128	!-- In case of turbulent inflow calculate the index of the recycling plane
	3129	IF ( turbulent_inflow ) THEN
	3130	IF ( recycling_width == 9999999.9 ) THEN
	3131	!
	3132	!-- Set the default value for the width of the recycling domain
	3133	recycling_width = 0.1 * nx * dx
	3134	ELSE
	3135	IF ( recycling_width < dx .OR. recycling_width > nx * dx ) THEN
[215]	3136	WRITE( message_string, * ) 'illegal value for recycling_width:', &
	3137	' ', recycling_width
[226]	3138	CALL message( 'check_parameters', 'PA0134', 1, 2, 0, 6, 0 )
[151]	3139	ENDIF
	3140	ENDIF
	3141	!
	3142	!-- Calculate the index
	3143	recycling_plane = recycling_width / dx
	3144	ENDIF
	3145
	3146	!
[1]	3147	!-- Check random generator
	3148	IF ( random_generator /= 'system-specific' .AND. &
	3149	random_generator /= 'numerical-recipes' ) THEN
[215]	3150	message_string = 'unknown random generator: random_generator = "' // &
	3151	TRIM( random_generator ) // '"'
[226]	3152	CALL message( 'check_parameters', 'PA0135', 1, 2, 0, 6, 0 )
[1]	3153	ENDIF
	3154
	3155	!
	3156	!-- Determine damping level index for 1D model
	3157	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
	3158	IF ( damp_level_1d == -1.0 ) THEN
	3159	damp_level_1d = zu(nzt+1)
	3160	damp_level_ind_1d = nzt + 1
	3161	ELSEIF ( damp_level_1d < 0.0 .OR. damp_level_1d > zu(nzt+1) ) THEN
[215]	3162	WRITE( message_string, * ) 'damp_level_1d = ', damp_level_1d, &
	3163	' must be > 0.0 and < ', zu(nzt+1), '(zu(nzt+1))'
[226]	3164	CALL message( 'check_parameters', 'PA0136', 1, 2, 0, 6, 0 )
[1]	3165	ELSE
	3166	DO k = 1, nzt+1
	3167	IF ( damp_level_1d <= zu(k) ) THEN
	3168	damp_level_ind_1d = k
	3169	EXIT
	3170	ENDIF
	3171	ENDDO
	3172	ENDIF
	3173	ENDIF
[215]	3174
[1]	3175	!
	3176	!-- Check some other 1d-model parameters
	3177	IF ( TRIM( mixing_length_1d ) /= 'as_in_3d_model' .AND. &
	3178	TRIM( mixing_length_1d ) /= 'blackadar' ) THEN
[215]	3179	message_string = 'mixing_length_1d = "' // TRIM( mixing_length_1d ) // &
	3180	'" is unknown'
[226]	3181	CALL message( 'check_parameters', 'PA0137', 1, 2, 0, 6, 0 )
[1]	3182	ENDIF
	3183	IF ( TRIM( dissipation_1d ) /= 'as_in_3d_model' .AND. &
	3184	TRIM( dissipation_1d ) /= 'detering' ) THEN
[215]	3185	message_string = 'dissipation_1d = "' // TRIM( dissipation_1d ) // &
	3186	'" is unknown'
[226]	3187	CALL message( 'check_parameters', 'PA0138', 1, 2, 0, 6, 0 )
[1]	3188	ENDIF
	3189
	3190	!
	3191	!-- Set time for the next user defined restart (time_restart is the
	3192	!-- internal parameter for steering restart events)
	3193	IF ( restart_time /= 9999999.9 ) THEN
[291]	3194	IF ( restart_time > time_since_reference_point ) THEN
	3195	time_restart = restart_time
	3196	ENDIF
[1]	3197	ELSE
	3198	!
	3199	!-- In case of a restart run, set internal parameter to default (no restart)
	3200	!-- if the NAMELIST-parameter restart_time is omitted
	3201	time_restart = 9999999.9
	3202	ENDIF
	3203
	3204	!
	3205	!-- Set default value of the time needed to terminate a model run
	3206	IF ( termination_time_needed == -1.0 ) THEN
	3207	IF ( host(1:3) == 'ibm' ) THEN
	3208	termination_time_needed = 300.0
	3209	ELSE
	3210	termination_time_needed = 35.0
	3211	ENDIF
	3212	ENDIF
	3213
	3214	!
	3215	!-- Check the time needed to terminate a model run
	3216	IF ( host(1:3) == 't3e' ) THEN
	3217	!
	3218	!-- Time needed must be at least 30 seconds on all CRAY machines, because
	3219	!-- MPP_TREMAIN gives the remaining CPU time only in steps of 30 seconds
	3220	IF ( termination_time_needed <= 30.0 ) THEN
[215]	3221	WRITE( message_string, * ) 'termination_time_needed = ', &
	3222	termination_time_needed, ' must be > 30.0 on host "', &
	3223	TRIM( host ), '"'
[226]	3224	CALL message( 'check_parameters', 'PA0139', 1, 2, 0, 6, 0 )
[1]	3225	ENDIF
	3226	ELSEIF ( host(1:3) == 'ibm' ) THEN
	3227	!
	3228	!-- On IBM-regatta machines the time should be at least 300 seconds,
	3229	!-- because the job time consumed before executing palm (for compiling,
	3230	!-- copying of files, etc.) has to be regarded
	3231	IF ( termination_time_needed < 300.0 ) THEN
[215]	3232	WRITE( message_string, * ) 'termination_time_needed = ', &
	3233	termination_time_needed, ' should be >= 300.0 on host "', &
	3234	TRIM( host ), '"'
[226]	3235	CALL message( 'check_parameters', 'PA0140', 1, 2, 0, 6, 0 )
[1]	3236	ENDIF
	3237	ENDIF
	3238
[217]	3239	!
[240]	3240	!-- Check pressure gradient conditions
	3241	IF ( dp_external .AND. conserve_volume_flow ) THEN
[388]	3242	WRITE( message_string, * ) 'Both dp_external and conserve_volume_flo', &
	3243	'w are .TRUE. but one of them must be .FALSE.'
[240]	3244	CALL message( 'check_parameters', 'PA0150', 1, 2, 0, 6, 0 )
	3245	ENDIF
	3246	IF ( dp_external ) THEN
	3247	IF ( dp_level_b < zu(nzb) .OR. dp_level_b > zu(nzt) ) THEN
	3248	WRITE( message_string, * ) 'dp_level_b = ', dp_level_b, ' is out ', &
	3249	' of range'
	3250	CALL message( 'check_parameters', 'PA0151', 1, 2, 0, 6, 0 )
	3251	ENDIF
	3252	IF ( .NOT. ANY( dpdxy /= 0.0 ) ) THEN
[388]	3253	WRITE( message_string, * ) 'dp_external is .TRUE. but dpdxy is ze', &
	3254	'ro, i.e. the external pressure gradient & will not be applied'
[240]	3255	CALL message( 'check_parameters', 'PA0152', 0, 1, 0, 6, 0 )
	3256	ENDIF
	3257	ENDIF
	3258	IF ( ANY( dpdxy /= 0.0 ) .AND. .NOT. dp_external ) THEN
	3259	WRITE( message_string, * ) 'dpdxy is nonzero but dp_external is ', &
	3260	'.FALSE., i.e. the external pressure gradient & will not be applied'
	3261	CALL message( 'check_parameters', 'PA0153', 0, 1, 0, 6, 0 )
	3262	ENDIF
[241]	3263	IF ( conserve_volume_flow ) THEN
	3264	IF ( TRIM( conserve_volume_flow_mode ) == 'default' ) THEN
[667]	3265
	3266	conserve_volume_flow_mode = 'initial_profiles'
	3267
[241]	3268	ELSEIF ( TRIM( conserve_volume_flow_mode ) /= 'initial_profiles' .AND. &
	3269	TRIM( conserve_volume_flow_mode ) /= 'inflow_profile' .AND. &
	3270	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) THEN
	3271	WRITE( message_string, * ) 'unknown conserve_volume_flow_mode: ', &
	3272	conserve_volume_flow_mode
	3273	CALL message( 'check_parameters', 'PA0154', 1, 2, 0, 6, 0 )
	3274	ENDIF
[667]	3275	IF ( (bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic') .AND. &
	3276	TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
	3277	WRITE( message_string, * ) 'non-cyclic boundary conditions ', &
	3278	'require conserve_volume_flow_mode = ''initial_profiles'''
[241]	3279	CALL message( 'check_parameters', 'PA0155', 1, 2, 0, 6, 0 )
	3280	ENDIF
	3281	IF ( bc_lr == 'cyclic' .AND. bc_ns == 'cyclic' .AND. &
	3282	TRIM( conserve_volume_flow_mode ) == 'inflow_profile' ) THEN
	3283	WRITE( message_string, * ) 'cyclic boundary conditions ', &
[667]	3284	'require conserve_volume_flow_mode = ''initial_profiles''', &
[241]	3285	' or ''bulk_velocity'''
	3286	CALL message( 'check_parameters', 'PA0156', 1, 2, 0, 6, 0 )
	3287	ENDIF
	3288	ENDIF
	3289	IF ( ( u_bulk /= 0.0 .OR. v_bulk /= 0.0 ) .AND. &
	3290	( .NOT. conserve_volume_flow .OR. &
	3291	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) ) THEN
	3292	WRITE( message_string, * ) 'nonzero bulk velocity requires ', &
[667]	3293	'conserve_volume_flow = .T. and ', &
[241]	3294	'conserve_volume_flow_mode = ''bulk_velocity'''
	3295	CALL message( 'check_parameters', 'PA0157', 1, 2, 0, 6, 0 )
	3296	ENDIF
[240]	3297
	3298	!
[264]	3299	!-- Check particle attributes
	3300	IF ( particle_color /= 'none' ) THEN
	3301	IF ( particle_color /= 'absuv' .AND. particle_color /= 'pt*' .AND. &
	3302	particle_color /= 'z' ) THEN
	3303	message_string = 'illegal value for parameter particle_color: ' // &
	3304	TRIM( particle_color)
	3305	CALL message( 'check_parameters', 'PA0313', 1, 2, 0, 6, 0 )
	3306	ELSE
	3307	IF ( color_interval(2) <= color_interval(1) ) THEN
	3308	message_string = 'color_interval(2) <= color_interval(1)'
	3309	CALL message( 'check_parameters', 'PA0315', 1, 2, 0, 6, 0 )
	3310	ENDIF
	3311	ENDIF
	3312	ENDIF
	3313
	3314	IF ( particle_dvrpsize /= 'none' ) THEN
	3315	IF ( particle_dvrpsize /= 'absw' ) THEN
	3316	message_string = 'illegal value for parameter particle_dvrpsize:' // &
	3317	' ' // TRIM( particle_color)
	3318	CALL message( 'check_parameters', 'PA0314', 1, 2, 0, 6, 0 )
	3319	ELSE
	3320	IF ( dvrpsize_interval(2) <= dvrpsize_interval(1) ) THEN
	3321	message_string = 'dvrpsize_interval(2) <= dvrpsize_interval(1)'
	3322	CALL message( 'check_parameters', 'PA0316', 1, 2, 0, 6, 0 )
	3323	ENDIF
	3324	ENDIF
	3325	ENDIF
	3326
	3327	!
[217]	3328	!-- Check &userpar parameters
	3329	CALL user_check_parameters
[1]	3330
[217]	3331
[667]	3332
[1]	3333	END SUBROUTINE check_parameters

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |