Home

Context Navigation

source: palm/trunk/SOURCE/check_open.f90 @ 807

Last change on this file since 807 was 807, checked in by maronga, 12 years ago
new utility check_namelist_files implemented
Property svn:keywords set to `Id`
File size: 56.7 KB

Line
1	SUBROUTINE check_open( file_id )
2
3	!------------------------------------------------------------------------------!
4	! Current revisions:
5	! -----------------
6	! New cpp directive "__check" implemented which is used by check_namelist_files
7	!
8	!
9	! Former revisions:
10	! -----------------
11	! $Id: check_open.f90 807 2012-01-25 11:53:51Z maronga $
12	! Bugfix concerning opening of 3D files in restart runs in case of netCDF4
13	!
14	! 667 2010-12-23 12:06:00Z suehring/gryschka
15	! Output of total array size was adapted to nbgp.
16	!
17	! 600 2010-11-24 16:10:51Z raasch
18	! bugfix in opening of cross section netcdf-files (parallel opening with
19	! netcdf4 only works for netcdf_data_format > 2)
20	!
21	! 564 2010-09-30 13:18:59Z helmke
22	! start number of mask output files changed to 201, netcdf message identifiers
23	! of masked output changed
24	!
25	! 519 2010-03-19 05:30:02Z raasch
26	! NetCDF4 support for particle data
27	!
28	! 493 2010-03-01 08:30:24Z raasch
29	! NetCDF4 support (parallel output)
30	!
31	! 410 2009-12-04 17:05:40Z letzel
32	! masked data output
33	!
34	! 277 2009-03-31 09:13:47Z heinze
35	! Output of NetCDF messages with aid of message handling routine.
36	! Output of messages replaced by message handling routine
37	!
38	! 146 2008-01-17 13:08:34Z raasch
39	! First opening of unit 13 openes file _0000 on all PEs (parallel version)
40	! because only this file contains the global variables,
41	! myid_char_14 removed
42	!
43	! 120 2007-10-17 11:54:43Z raasch
44	! Status of 3D-volume NetCDF data file only depends on switch netcdf_64bit_3d
45	!
46	! 105 2007-08-08 07:12:55Z raasch
47	! Different filenames are used in case of a coupled simulation,
48	! coupling_char added to all relevant filenames
49	!
50	! 82 2007-04-16 15:40:52Z raasch
51	! Call of local_getenv removed, preprocessor directives for old systems removed
52	!
53	! 46 2007-03-05 06:00:47Z raasch
54	! +netcdf_64bit_3d to switch on 64bit offset only for 3D files
55	!
56	! RCS Log replace by Id keyword, revision history cleaned up
57	!
58	! Revision 1.44 2006/08/22 13:48:34 raasch
59	! xz and yz cross sections now up to nzt+1
60	!
61	! Revision 1.1 1997/08/11 06:10:55 raasch
62	! Initial revision
63	!
64	!
65	! Description:
66	! ------------
67	! Check if file unit is open. If not, open file and, if necessary, write a
68	! header or start other initializing actions, respectively.
69	!------------------------------------------------------------------------------!
70
71	USE array_kind
72	USE arrays_3d
73	USE control_parameters
74	USE grid_variables
75	USE indices
76	USE netcdf_control
77	USE particle_attributes
78	USE pegrid
79	USE profil_parameter
80	USE statistics
81
82	IMPLICIT NONE
83
84	CHARACTER (LEN=2) :: mask_char, suffix
85	CHARACTER (LEN=20) :: xtext = 'time in s'
86	CHARACTER (LEN=30) :: filename
87	CHARACTER (LEN=40) :: avs_coor_file, avs_coor_file_localname, &
88	avs_data_file_localname
89	CHARACTER (LEN=80) :: rtext
90	CHARACTER (LEN=100) :: avs_coor_file_catalog, avs_data_file_catalog, &
91	batch_scp, zeile
92	CHARACTER (LEN=400) :: command
93
94	INTEGER :: av, anzzeile = 1, cranz, file_id, i, iaddres, ierr1, iusern, &
95	j, k, legpos = 1, timodex = 1
96	INTEGER, DIMENSION(10) :: cucol, klist, lstyle
97
98	LOGICAL :: avs_coor_file_found = .FALSE., avs_data_file_found = .FALSE., &
99	datleg = .TRUE., get_filenames, grid = .TRUE., netcdf_extend, &
100	rand = .TRUE., swap = .TRUE., twoxa = .TRUE., twoya = .TRUE.
101
102	REAL :: ansx = -999.999, ansy = -999.999, gwid = 0.1, rlegfak = 1.5, &
103	sizex = 250.0, sizey = 40.0, texfac = 1.5
104
105	REAL, DIMENSION(:), ALLOCATABLE :: eta, ho, hu
106	REAL(spk), DIMENSION(:), ALLOCATABLE :: xkoor, ykoor, zkoor
107
108
109	NAMELIST /RAHMEN/ anzzeile, cranz, datleg, rtext, swap
110	NAMELIST /CROSS/ ansx, ansy, cucol, grid, gwid, klist, legpos, lstyle, &
111	rand, rlegfak, sizex, sizey, texfac, &
112	timodex, twoxa, twoya, xtext
113
114
115	!
116	!-- Immediate return if file already open
117	IF ( openfile(file_id)%opened ) RETURN
118
119	#if .NOT. defined ( __check )
120	!
121	!-- Only certain files are allowed to be re-opened
122	!-- NOTE: some of the other files perhaps also could be re-opened, but it
123	!-- has not been checked so far, if it works!
124	IF ( openfile(file_id)%opened_before ) THEN
125	SELECT CASE ( file_id )
126	CASE ( 13, 14, 21, 22, 23, 80:85 )
127	IF ( file_id == 14 .AND. openfile(file_id)%opened_before ) THEN
128	message_string = 're-open of unit ' // &
129	'14 is not verified. Please check results!'
130	CALL message( 'check_open', 'PA0165', 0, 1, 0, 6, 0 )
131	ENDIF
132
133	CASE DEFAULT
134	WRITE( message_string, * ) 're-opening of file-id ', file_id, &
135	' is not allowed'
136	CALL message( 'check_open', 'PA0166', 0, 1, 0, 6, 0 )
137
138	RETURN
139
140	END SELECT
141	ENDIF
142	#endif
143
144	!
145	!-- Check if file may be opened on the relevant PE
146	SELECT CASE ( file_id )
147
148	CASE ( 15, 16, 17, 18, 19, 40:49, 50:59, 81:84, 104:105, 107, 109 )
149
150	IF ( myid /= 0 ) THEN
151	WRITE( message_string, * ) 'opening file-id ',file_id, &
152	' not allowed for PE ',myid
153	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
154	ENDIF
155
156	CASE ( 101:103, 106, 111:113, 116, 201:200+2*max_masks )
157
158	IF ( netcdf_data_format < 3 ) THEN
159
160	IF ( myid /= 0 ) THEN
161	WRITE( message_string, * ) 'opening file-id ',file_id, &
162	' not allowed for PE ',myid
163	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
164	ENDIF
165
166	ENDIF
167
168	CASE ( 21, 22, 23 )
169
170	IF ( .NOT. data_output_2d_on_each_pe ) THEN
171	IF ( myid /= 0 ) THEN
172	WRITE( message_string, * ) 'opening file-id ',file_id, &
173	' not allowed for PE ',myid
174	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
175	END IF
176	ENDIF
177
178	CASE ( 27, 28, 29, 31, 32, 33, 71:73, 90:99 )
179
180	!
181	!-- File-ids that are used temporarily in other routines
182	WRITE( message_string, * ) 'opening file-id ',file_id, &
183	' is not allowed since it is used otherwise'
184	CALL message( 'check_open', 'PA0168', 0, 1, 0, 6, 0 )
185
186	END SELECT
187
188	!
189	!-- Open relevant files
190	SELECT CASE ( file_id )
191
192	CASE ( 11 )
193
194	#if defined ( __check )
195	!
196	!-- In case of a prior parameter file check, the p3d data is stored in
197	!-- PARIN, while the p3df is stored in PARINF. This only applies to
198	!-- check_namelist_files!
199	IF ( check_restart == 2 ) THEN
200	OPEN ( 11, FILE='PARINF'//coupling_char, FORM='FORMATTED', &
201	STATUS='OLD' )
202	ELSE
203	OPEN ( 11, FILE='PARIN'//coupling_char, FORM='FORMATTED', &
204	STATUS='OLD' )
205	END IF
206	#else
207
208	OPEN ( 11, FILE='PARIN'//coupling_char, FORM='FORMATTED', &
209	STATUS='OLD' )
210	#endif
211
212	CASE ( 13 )
213
214	IF ( myid_char == '' ) THEN
215	OPEN ( 13, FILE='BININ'//coupling_char//myid_char, &
216	FORM='UNFORMATTED', STATUS='OLD' )
217	ELSE
218	!
219	!-- First opening of unit 13 openes file _0000 on all PEs because only
220	!-- this file contains the global variables
221	IF ( .NOT. openfile(file_id)%opened_before ) THEN
222	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/_0000',&
223	FORM='UNFORMATTED', STATUS='OLD' )
224	ELSE
225	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/'//myid_char,&
226	FORM='UNFORMATTED', STATUS='OLD' )
227	ENDIF
228	ENDIF
229
230	CASE ( 14 )
231
232	IF ( myid_char == '' ) THEN
233	OPEN ( 14, FILE='BINOUT'//coupling_char//myid_char, &
234	FORM='UNFORMATTED', POSITION='APPEND' )
235	ELSE
236	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
237	CALL local_system( 'mkdir BINOUT' // coupling_char )
238	ENDIF
239	#if defined( __parallel ) .AND. .NOT. defined ( __check )
240	!
241	!-- Set a barrier in order to allow that all other processors in the
242	!-- directory created by PE0 can open their file
243	CALL MPI_BARRIER( comm2d, ierr )
244	#endif
245	OPEN ( 14, FILE='BINOUT'//TRIM(coupling_char)//'/'//myid_char, &
246	FORM='UNFORMATTED', POSITION='APPEND' )
247	ENDIF
248
249	CASE ( 15 )
250
251	OPEN ( 15, FILE='RUN_CONTROL'//coupling_char, FORM='FORMATTED' )
252
253	CASE ( 16 )
254
255	OPEN ( 16, FILE='LIST_PROFIL'//coupling_char, FORM='FORMATTED' )
256
257	CASE ( 17 )
258
259	OPEN ( 17, FILE='LIST_PROFIL_1D'//coupling_char, FORM='FORMATTED' )
260
261	CASE ( 18 )
262
263	OPEN ( 18, FILE='CPU_MEASURES'//coupling_char, FORM='FORMATTED' )
264
265	CASE ( 19 )
266
267	OPEN ( 19, FILE='HEADER'//coupling_char, FORM='FORMATTED' )
268
269	CASE ( 20 )
270
271	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
272	CALL local_system( 'mkdir DATA_LOG' // coupling_char )
273	ENDIF
274	IF ( myid_char == '' ) THEN
275	OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/_0000', &
276	FORM='UNFORMATTED', POSITION='APPEND' )
277	ELSE
278	#if defined( __parallel ) .AND. .NOT. defined ( __check )
279	!
280	!-- Set a barrier in order to allow that all other processors in the
281	!-- directory created by PE0 can open their file
282	CALL MPI_BARRIER( comm2d, ierr )
283	#endif
284	OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/'//myid_char,&
285	FORM='UNFORMATTED', POSITION='APPEND' )
286	ENDIF
287
288	CASE ( 21 )
289
290	IF ( data_output_2d_on_each_pe ) THEN
291	OPEN ( 21, FILE='PLOT2D_XY'//TRIM( coupling_char )//myid_char, &
292	FORM='UNFORMATTED', POSITION='APPEND' )
293	ELSE
294	OPEN ( 21, FILE='PLOT2D_XY'//coupling_char, &
295	FORM='UNFORMATTED', POSITION='APPEND' )
296	ENDIF
297
298	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
299	!
300	!-- Output for combine_plot_fields
301	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
302	WRITE (21) -nbgp, nx+nbgp, -nbgp, ny+nbgp ! total array size
303	WRITE (21) 0, nx+1, 0, ny+1 ! output part
304	ENDIF
305	!
306	!-- Determine and write ISO2D coordiante header
307	ALLOCATE( eta(0:ny+1), ho(0:nx+1), hu(0:nx+1) )
308	hu = 0.0
309	ho = (ny+1) * dy
310	DO i = 1, ny
311	eta(i) = REAL( i ) / ( ny + 1.0 )
312	ENDDO
313	eta(0) = 0.0
314	eta(ny+1) = 1.0
315
316	WRITE (21) dx,eta,hu,ho
317	DEALLOCATE( eta, ho, hu )
318
319	!
320	!-- Create output file for local parameters
321	IF ( iso2d_output ) THEN
322	OPEN ( 27, FILE='PLOT2D_XY_LOCAL'//coupling_char, &
323	FORM='FORMATTED', DELIM='APOSTROPHE' )
324	openfile(27)%opened = .TRUE.
325	ENDIF
326
327	ENDIF
328
329	CASE ( 22 )
330
331	IF ( data_output_2d_on_each_pe ) THEN
332	OPEN ( 22, FILE='PLOT2D_XZ'//TRIM( coupling_char )//myid_char, &
333	FORM='UNFORMATTED', POSITION='APPEND' )
334	ELSE
335	OPEN ( 22, FILE='PLOT2D_XZ'//coupling_char, FORM='UNFORMATTED', &
336	POSITION='APPEND' )
337	ENDIF
338
339	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
340	!
341	!-- Output for combine_plot_fields
342	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
343	WRITE (22) -nbgp, nx+nbgp, 0, nz+1 ! total array size
344	WRITE (22) 0, nx+1, 0, nz+1 ! output part
345	ENDIF
346	!
347	!-- Determine and write ISO2D coordiante header
348	ALLOCATE( eta(0:nz+1), ho(0:nx+1), hu(0:nx+1) )
349	hu = 0.0
350	ho = zu(nz+1)
351	DO i = 1, nz
352	eta(i) = REAL( zu(i) ) / zu(nz+1)
353	ENDDO
354	eta(0) = 0.0
355	eta(nz+1) = 1.0
356
357	WRITE (22) dx,eta,hu,ho
358	DEALLOCATE( eta, ho, hu )
359	!
360	!-- Create output file for local parameters
361	OPEN ( 28, FILE='PLOT2D_XZ_LOCAL'//coupling_char, &
362	FORM='FORMATTED', DELIM='APOSTROPHE' )
363	openfile(28)%opened = .TRUE.
364
365	ENDIF
366
367	CASE ( 23 )
368
369	IF ( data_output_2d_on_each_pe ) THEN
370	OPEN ( 23, FILE='PLOT2D_YZ'//TRIM( coupling_char )//myid_char, &
371	FORM='UNFORMATTED', POSITION='APPEND' )
372	ELSE
373	OPEN ( 23, FILE='PLOT2D_YZ'//coupling_char, FORM='UNFORMATTED', &
374	POSITION='APPEND' )
375	ENDIF
376
377	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
378	!
379	!-- Output for combine_plot_fields
380	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
381	WRITE (23) -nbgp, ny+nbgp, 0, nz+1 ! total array size
382	WRITE (23) 0, ny+1, 0, nz+1 ! output part
383	ENDIF
384	!
385	!-- Determine and write ISO2D coordiante header
386	ALLOCATE( eta(0:nz+1), ho(0:ny+1), hu(0:ny+1) )
387	hu = 0.0
388	ho = zu(nz+1)
389	DO i = 1, nz
390	eta(i) = REAL( zu(i) ) / zu(nz+1)
391	ENDDO
392	eta(0) = 0.0
393	eta(nz+1) = 1.0
394
395	WRITE (23) dx,eta,hu,ho
396	DEALLOCATE( eta, ho, hu )
397	!
398	!-- Create output file for local parameters
399	OPEN ( 29, FILE='PLOT2D_YZ_LOCAL'//coupling_char, &
400	FORM='FORMATTED', DELIM='APOSTROPHE' )
401	openfile(29)%opened = .TRUE.
402
403	ENDIF
404
405	CASE ( 30 )
406
407	OPEN ( 30, FILE='PLOT3D_DATA'//TRIM( coupling_char )//myid_char, &
408	FORM='UNFORMATTED' )
409	!
410	!-- Write coordinate file for AVS
411	IF ( myid == 0 ) THEN
412	#if defined( __parallel )
413	!
414	!-- Specifications for combine_plot_fields
415	IF ( .NOT. do3d_compress ) THEN
416	WRITE ( 30 ) -nbgp,nx+nbgp,-nbgp,ny+nbgp, 0 ,nz_do3d
417	WRITE ( 30 ) 0,nx+1,0,ny+1,0,nz_do3d
418	ENDIF
419	#endif
420	!
421	!-- Write coordinate file for AVS:
422	!-- First determine file names (including cyle numbers) of AVS files on
423	!-- target machine (to which the files are to be transferred).
424	!-- Therefore path information has to be obtained first.
425	IF ( avs_output ) THEN
426	iaddres = LEN_TRIM( return_addres )
427	iusern = LEN_TRIM( return_username )
428
429	OPEN ( 3, FILE='OUTPUT_FILE_CONNECTIONS', FORM='FORMATTED' )
430	DO WHILE ( .NOT. avs_coor_file_found .OR. &
431	.NOT. avs_data_file_found )
432
433	READ ( 3, '(A)', END=1 ) zeile
434
435	SELECT CASE ( zeile(1:11) )
436
437	CASE ( 'PLOT3D_COOR' )
438	READ ( 3, '(A/A)' ) avs_coor_file_catalog, &
439	avs_coor_file_localname
440	avs_coor_file_found = .TRUE.
441
442	CASE ( 'PLOT3D_DATA' )
443	READ ( 3, '(A/A)' ) avs_data_file_catalog, &
444	avs_data_file_localname
445	avs_data_file_found = .TRUE.
446
447	CASE DEFAULT
448	READ ( 3, '(A/A)' ) zeile, zeile
449
450	END SELECT
451
452	ENDDO
453	!
454	!-- Now the cycle numbers on the remote machine must be obtained
455	!-- using batch_scp
456	1 CLOSE ( 3 )
457	IF ( .NOT. avs_coor_file_found .OR. &
458	.NOT. avs_data_file_found ) THEN
459	message_string= 'no filename for AVS-data-file ' // &
460	'found in MRUN-config-file' // &
461	' &filename in FLD-file set to "unknown"'
462	CALL message( 'check_open', 'PA0169', 0, 1, 0, 6, 0 )
463
464	avs_coor_file = 'unknown'
465	avs_data_file = 'unknown'
466	ELSE
467	get_filenames = .TRUE.
468	IF ( TRIM( host ) == 'hpmuk' .OR. &
469	TRIM( host ) == 'lcmuk' ) THEN
470	batch_scp = '/home/raasch/pub/batch_scp'
471	ELSEIF ( TRIM( host ) == 'nech' ) THEN
472	batch_scp = '/ipf/b/b323011/pub/batch_scp'
473	ELSEIF ( TRIM( host ) == 'ibmh' .OR. &
474	TRIM( host ) == 'ibmb' ) THEN
475	batch_scp = '/home/h/niksiraa/pub/batch_scp'
476	ELSEIF ( TRIM( host ) == 't3eb' ) THEN
477	batch_scp = '/home/nhbksira/pub/batch_scp'
478	ELSE
479	message_string= 'no path for batch_scp on host "' // &
480	TRIM( host ) // '"'
481	CALL message( 'check_open', 'PA0170', 0, 1, 0, 6, 0 )
482	get_filenames = .FALSE.
483	ENDIF
484
485	IF ( get_filenames ) THEN
486	!
487	!-- Determine the coordinate file name.
488	!-- /etc/passwd serves as Dummy-Datei, because it is not
489	!-- really transferred.
490	command = TRIM( batch_scp ) // ' -n -u ' // &
491	return_username(1:iusern) // ' ' // &
492	return_addres(1:iaddres) // ' /etc/passwd "' // &
493	TRIM( avs_coor_file_catalog ) // '" ' // &
494	TRIM( avs_coor_file_localname ) // ' > REMOTE_FILENAME'
495
496	CALL local_system( command )
497	OPEN ( 3, FILE='REMOTE_FILENAME', FORM='FORMATTED' )
498	READ ( 3, '(A)' ) avs_coor_file
499	CLOSE ( 3 )
500	!
501	!-- Determine the data file name
502	command = TRIM( batch_scp ) // ' -n -u ' // &
503	return_username(1:iusern) // ' ' // &
504	return_addres(1:iaddres) // ' /etc/passwd "' // &
505	TRIM( avs_data_file_catalog ) // '" ' // &
506	TRIM( avs_data_file_localname ) // ' > REMOTE_FILENAME'
507
508	CALL local_system( command )
509	OPEN ( 3, FILE='REMOTE_FILENAME', FORM='FORMATTED' )
510	READ ( 3, '(A)' ) avs_data_file
511	CLOSE ( 3 )
512
513	ELSE
514
515	avs_coor_file = 'unknown'
516	avs_data_file = 'unknown'
517
518	ENDIF
519
520	ENDIF
521
522	!
523	!-- Output of the coordinate file description for FLD-file
524	OPEN ( 33, FILE='PLOT3D_FLD_COOR', FORM='FORMATTED' )
525	openfile(33)%opened = .TRUE.
526	WRITE ( 33, 3300 ) TRIM( avs_coor_file ), &
527	TRIM( avs_coor_file ), (nx+2nbgp)4, &
528	TRIM( avs_coor_file ), (nx+2nbgp)4+(ny+2nbgp)4
529
530
531	ALLOCATE( xkoor(0:nx+1), ykoor(0:ny+1), zkoor(0:nz_do3d) )
532	DO i = 0, nx+1
533	xkoor(i) = i * dx
534	ENDDO
535	DO j = 0, ny+1
536	ykoor(j) = j * dy
537	ENDDO
538	DO k = 0, nz_do3d
539	zkoor(k) = zu(k)
540	ENDDO
541
542	!
543	!-- Create and write on AVS coordinate file
544	OPEN ( 31, FILE='PLOT3D_COOR', FORM='UNFORMATTED' )
545	openfile(31)%opened = .TRUE.
546
547	WRITE (31) xkoor, ykoor, zkoor
548	DEALLOCATE( xkoor, ykoor, zkoor )
549
550	!
551	!-- Create FLD file (being written on in close_file)
552	OPEN ( 32, FILE='PLOT3D_FLD', FORM='FORMATTED' )
553	openfile(32)%opened = .TRUE.
554
555	!
556	!-- Create flag file for compressed 3D output,
557	!-- influences output commands in mrun
558	IF ( do3d_compress ) THEN
559	OPEN ( 3, FILE='PLOT3D_COMPRESSED', FORM='FORMATTED' )
560	WRITE ( 3, '(1X)' )
561	CLOSE ( 3 )
562	ENDIF
563
564	ENDIF
565
566	ENDIF
567
568	!
569	!-- In case of data compression output of the coordinates of the
570	!-- corresponding partial array of a PE only once at the top of the file
571	IF ( avs_output .AND. do3d_compress ) THEN
572	WRITE ( 30 ) nxlg, nxrg, nysg, nyng, nzb, nz_do3d
573	ENDIF
574
575	CASE ( 40:49 )
576
577	IF ( statistic_regions == 0 .AND. file_id == 40 ) THEN
578	suffix = ''
579	ELSE
580	WRITE ( suffix, '(''_'',I1)' ) file_id - 40
581	ENDIF
582	OPEN ( file_id, FILE='PLOT1D_DATA'//TRIM( coupling_char )// &
583	TRIM( suffix ), &
584	FORM='FORMATTED' )
585	!
586	!-- Write contents comments at the top of the file
587	WRITE ( file_id, 4000 ) TRIM( run_description_header ) // ' ' // &
588	TRIM( region( file_id - 40 ) )
589
590	CASE ( 50:59 )
591
592	IF ( statistic_regions == 0 .AND. file_id == 50 ) THEN
593	suffix = ''
594	ELSE
595	WRITE ( suffix, '(''_'',I1)' ) file_id - 50
596	ENDIF
597	OPEN ( file_id, FILE='PLOTTS_DATA'//TRIM( coupling_char )// &
598	TRIM( suffix ), &
599	FORM='FORMATTED', RECL=496 )
600	!
601	!-- Write PROFIL parameter file for output of time series
602	!-- NOTE: To be on the safe side, this output is done at the beginning of
603	!-- the model run (in case of collapse) and it is repeated in
604	!-- close_file, then, however, with value ranges for the coordinate
605	!-- systems
606	!
607	!-- Firstly determine the number of the coordinate systems to be drawn
608	cranz = 0
609	DO j = 1, 10
610	IF ( cross_ts_number_count(j) /= 0 ) cranz = cranz+1
611	ENDDO
612	rtext = '\1.0 ' // TRIM( run_description_header ) // ' ' // &
613	TRIM( region( file_id - 50 ) )
614	!
615	!-- Write RAHMEN parameter
616	OPEN ( 90, FILE='PLOTTS_PAR'//TRIM( coupling_char )// &
617	TRIM( suffix ), &
618	FORM='FORMATTED', DELIM='APOSTROPHE' )
619	WRITE ( 90, RAHMEN )
620	!
621	!-- Determine and write CROSS parameters for the individual coordinate
622	!-- systems
623	DO j = 1, 10
624	k = cross_ts_number_count(j)
625	IF ( k /= 0 ) THEN
626	!
627	!-- Store curve numbers, colours and line style
628	klist(1:k) = cross_ts_numbers(1:k,j)
629	klist(k+1:10) = 999999
630	cucol(1:k) = linecolors(1:k)
631	lstyle(1:k) = linestyles(1:k)
632	!
633	!-- Write CROSS parameter
634	WRITE ( 90, CROSS )
635
636	ENDIF
637	ENDDO
638
639	CLOSE ( 90 )
640	!
641	!-- Write all labels at the top of the data file, but only during the
642	!-- first run of a sequence of jobs. The following jobs copy the time
643	!-- series data to the bottom of that file.
644	IF ( runnr == 0 ) THEN
645	WRITE ( file_id, 5000 ) TRIM( run_description_header ) // &
646	' ' // TRIM( region( file_id - 50 ) )
647	ENDIF
648
649
650	CASE ( 80 )
651
652	IF ( myid_char == '' ) THEN
653	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM(coupling_char)//myid_char, &
654	FORM='FORMATTED', POSITION='APPEND' )
655	ELSE
656	IF ( myid == 0 .AND. .NOT. openfile(80)%opened_before ) THEN
657	CALL local_system( 'mkdir PARTICLE_INFOS' // coupling_char )
658	ENDIF
659	#if defined( __parallel ) .AND. .NOT. defined ( __check )
660	!
661	!-- Set a barrier in order to allow that thereafter all other
662	!-- processors in the directory created by PE0 can open their file.
663	!-- WARNING: The following barrier will lead to hanging jobs, if
664	!-- check_open is first called from routine
665	!-- allocate_prt_memory!
666	IF ( .NOT. openfile(80)%opened_before ) THEN
667	CALL MPI_BARRIER( comm2d, ierr )
668	ENDIF
669	#endif
670	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM( coupling_char )//'/'// &
671	myid_char, &
672	FORM='FORMATTED', POSITION='APPEND' )
673	ENDIF
674
675	IF ( .NOT. openfile(80)%opened_before ) THEN
676	WRITE ( 80, 8000 ) TRIM( run_description_header )
677	ENDIF
678
679	CASE ( 81 )
680
681	OPEN ( 81, FILE='PLOTSP_X_PAR'//coupling_char, FORM='FORMATTED', &
682	DELIM='APOSTROPHE', RECL=1500, POSITION='APPEND' )
683
684	CASE ( 82 )
685
686	OPEN ( 82, FILE='PLOTSP_X_DATA'//coupling_char, FORM='FORMATTED', &
687	POSITION = 'APPEND' )
688
689	CASE ( 83 )
690
691	OPEN ( 83, FILE='PLOTSP_Y_PAR'//coupling_char, FORM='FORMATTED', &
692	DELIM='APOSTROPHE', RECL=1500, POSITION='APPEND' )
693
694	CASE ( 84 )
695
696	OPEN ( 84, FILE='PLOTSP_Y_DATA'//coupling_char, FORM='FORMATTED', &
697	POSITION='APPEND' )
698
699	CASE ( 85 )
700
701	IF ( myid_char == '' ) THEN
702	OPEN ( 85, FILE='PARTICLE_DATA'//TRIM(coupling_char)//myid_char, &
703	FORM='UNFORMATTED', POSITION='APPEND' )
704	ELSE
705	IF ( myid == 0 .AND. .NOT. openfile(85)%opened_before ) THEN
706	CALL local_system( 'mkdir PARTICLE_DATA' // coupling_char )
707	ENDIF
708	#if defined( __parallel ) .AND. .NOT. defined ( __check )
709	!
710	!-- Set a barrier in order to allow that thereafter all other
711	!-- processors in the directory created by PE0 can open their file
712	CALL MPI_BARRIER( comm2d, ierr )
713	#endif
714	OPEN ( 85, FILE='PARTICLE_DATA'//TRIM( coupling_char )//'/'// &
715	myid_char, &
716	FORM='UNFORMATTED', POSITION='APPEND' )
717	ENDIF
718
719	IF ( .NOT. openfile(85)%opened_before ) THEN
720	WRITE ( 85 ) run_description_header
721	!
722	!-- Attention: change version number whenever the output format on
723	!-- unit 85 is changed (see also in routine advec_particles)
724	rtext = 'data format version 3.0'
725	WRITE ( 85 ) rtext
726	WRITE ( 85 ) number_of_particle_groups, &
727	max_number_of_particle_groups
728	WRITE ( 85 ) particle_groups
729	ENDIF
730
731	#if defined( __netcdf )
732	CASE ( 101, 111 )
733	!
734	!-- Set filename depending on unit number
735	IF ( file_id == 101 ) THEN
736	filename = 'DATA_2D_XY_NETCDF' // coupling_char
737	av = 0
738	ELSE
739	filename = 'DATA_2D_XY_AV_NETCDF' // coupling_char
740	av = 1
741	ENDIF
742	!
743	!-- Inquire, if there is a NetCDF file from a previuos run. This should
744	!-- be opened for extension, if its dimensions and variables match the
745	!-- actual run.
746	INQUIRE( FILE=filename, EXIST=netcdf_extend )
747
748	IF ( netcdf_extend ) THEN
749	!
750	!-- Open an existing NetCDF file for output
751	IF ( netcdf_data_format < 3 ) THEN
752	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_xy(av) )
753	ELSE
754	#if defined( __netcdf4 )
755	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_xy(av), &
756	COMM = comm2d, INFO = MPI_INFO_NULL )
757	#endif
758	ENDIF
759
760	CALL handle_netcdf_error( 'check_open', 20 )
761	!
762	!-- Read header information and set all ids. If there is a mismatch
763	!-- between the previuos and the actual run, netcdf_extend is returned
764	!-- as .FALSE.
765	CALL define_netcdf_header( 'xy', netcdf_extend, av )
766
767	!
768	!-- Remove the local file, if it can not be extended
769	IF ( .NOT. netcdf_extend ) THEN
770	nc_stat = NF90_CLOSE( id_set_xy(av) )
771	CALL handle_netcdf_error( 'check_open', 21 )
772	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
773	ENDIF
774
775	ENDIF
776
777	IF ( .NOT. netcdf_extend ) THEN
778	!
779	!-- Create a new NetCDF output file with requested NetCDF format
780	IF ( netcdf_data_format == 1 ) THEN
781	!
782	!-- Classic NetCDF format
783	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_xy(av) )
784
785	ELSEIF ( netcdf_data_format == 2 ) THEN
786	!
787	!-- 64bit-offset format
788	nc_stat = NF90_CREATE( filename, &
789	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
790	id_set_xy(av) )
791
792	#if defined( __netcdf4 )
793	ELSEIF ( netcdf_data_format == 3 ) THEN
794	!
795	!-- NetCDF4/HDF5 format
796	nc_stat = NF90_CREATE( filename, &
797	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
798	id_set_xy(av), COMM = comm2d, &
799	INFO = MPI_INFO_NULL )
800
801	ELSEIF ( netcdf_data_format == 4 ) THEN
802	!
803	!-- NetCDF4/HDF5 format with classic model flag
804	nc_stat = NF90_CREATE( filename, &
805	OR( NF90_NOCLOBBER, &
806	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
807	id_set_xy(av), COMM = comm2d, &
808	INFO = MPI_INFO_NULL )
809	#endif
810	ENDIF
811
812	CALL handle_netcdf_error( 'check_open', 22 )
813
814	!
815	!-- Define the header
816	CALL define_netcdf_header( 'xy', netcdf_extend, av )
817
818	!
819	!-- In case of parallel NetCDF output, create flag file which tells
820	!-- combine_plot_fields that nothing is to do.
821	IF ( myid == 0 .AND. netcdf_data_format > 2 ) THEN
822	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_XY' )
823	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
824	CLOSE( 99 )
825	ENDIF
826
827	ENDIF
828
829	CASE ( 102, 112 )
830	!
831	!-- Set filename depending on unit number
832	IF ( file_id == 102 ) THEN
833	filename = 'DATA_2D_XZ_NETCDF' // coupling_char
834	av = 0
835	ELSE
836	filename = 'DATA_2D_XZ_AV_NETCDF' // coupling_char
837	av = 1
838	ENDIF
839	!
840	!-- Inquire, if there is a NetCDF file from a previuos run. This should
841	!-- be opened for extension, if its dimensions and variables match the
842	!-- actual run.
843	INQUIRE( FILE=filename, EXIST=netcdf_extend )
844
845	IF ( netcdf_extend ) THEN
846	!
847	!-- Open an existing NetCDF file for output
848	IF ( netcdf_data_format < 3 ) THEN
849	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_xz(av) )
850	ELSE
851	#if defined( __netcdf4 )
852	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_xz(av), &
853	COMM = comm2d, INFO = MPI_INFO_NULL )
854	#endif
855	ENDIF
856
857	CALL handle_netcdf_error( 'check_open', 23 )
858	!
859	!-- Read header information and set all ids. If there is a mismatch
860	!-- between the previuos and the actual run, netcdf_extend is returned
861	!-- as .FALSE.
862	CALL define_netcdf_header( 'xz', netcdf_extend, av )
863
864	!
865	!-- Remove the local file, if it can not be extended
866	IF ( .NOT. netcdf_extend ) THEN
867	nc_stat = NF90_CLOSE( id_set_xz(av) )
868	CALL handle_netcdf_error( 'check_open', 24 )
869	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
870	ENDIF
871
872	ENDIF
873
874	IF ( .NOT. netcdf_extend ) THEN
875	!
876	!-- Create a new NetCDF output file with requested NetCDF format
877	IF ( netcdf_data_format == 1 ) THEN
878	!
879	!-- Classic NetCDF format
880	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_xz(av) )
881
882	ELSEIF ( netcdf_data_format == 2 ) THEN
883	!
884	!-- 64bit-offset format
885	nc_stat = NF90_CREATE( filename, &
886	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
887	id_set_xz(av) )
888
889	#if defined( __netcdf4 )
890	ELSEIF ( netcdf_data_format == 3 ) THEN
891	!
892	!-- NetCDF4/HDF5 format
893	nc_stat = NF90_CREATE( filename, &
894	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
895	id_set_xz(av), COMM = comm2d, &
896	INFO = MPI_INFO_NULL )
897
898	ELSEIF ( netcdf_data_format == 4 ) THEN
899	!
900	!-- NetCDF4/HDF5 format with classic model flag
901	nc_stat = NF90_CREATE( filename, &
902	OR( NF90_NOCLOBBER, &
903	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
904	id_set_xz(av), COMM = comm2d, &
905	INFO = MPI_INFO_NULL )
906	#endif
907	ENDIF
908
909	CALL handle_netcdf_error( 'check_open', 25 )
910
911	!
912	!-- Define the header
913	CALL define_netcdf_header( 'xz', netcdf_extend, av )
914
915	!
916	!-- In case of parallel NetCDF output, create flag file which tells
917	!-- combine_plot_fields that nothing is to do.
918	IF ( myid == 0 .AND. netcdf_data_format > 2 ) THEN
919	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_XZ' )
920	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
921	CLOSE( 99 )
922	ENDIF
923
924	ENDIF
925
926	CASE ( 103, 113 )
927	!
928	!-- Set filename depending on unit number
929	IF ( file_id == 103 ) THEN
930	filename = 'DATA_2D_YZ_NETCDF' // coupling_char
931	av = 0
932	ELSE
933	filename = 'DATA_2D_YZ_AV_NETCDF' // coupling_char
934	av = 1
935	ENDIF
936	!
937	!-- Inquire, if there is a NetCDF file from a previuos run. This should
938	!-- be opened for extension, if its dimensions and variables match the
939	!-- actual run.
940	INQUIRE( FILE=filename, EXIST=netcdf_extend )
941
942	IF ( netcdf_extend ) THEN
943	!
944	!-- Open an existing NetCDF file for output
945	IF ( netcdf_data_format < 3 ) THEN
946	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_yz(av) )
947	ELSE
948	#if defined( __netcdf4 )
949	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_yz(av), &
950	COMM = comm2d, INFO = MPI_INFO_NULL )
951	#endif
952	ENDIF
953
954	CALL handle_netcdf_error( 'check_open', 26 )
955	!
956	!-- Read header information and set all ids. If there is a mismatch
957	!-- between the previuos and the actual run, netcdf_extend is returned
958	!-- as .FALSE.
959	CALL define_netcdf_header( 'yz', netcdf_extend, av )
960
961	!
962	!-- Remove the local file, if it can not be extended
963	IF ( .NOT. netcdf_extend ) THEN
964	nc_stat = NF90_CLOSE( id_set_yz(av) )
965	CALL handle_netcdf_error( 'check_open', 27 )
966	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
967	ENDIF
968
969	ENDIF
970
971	IF ( .NOT. netcdf_extend ) THEN
972	!
973	!-- Create a new NetCDF output file with requested NetCDF format
974	IF ( netcdf_data_format == 1 ) THEN
975	!
976	!-- Classic NetCDF format
977	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_yz(av) )
978
979	ELSEIF ( netcdf_data_format == 2 ) THEN
980	!
981	!-- 64bit-offset format
982	nc_stat = NF90_CREATE( filename, &
983	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
984	id_set_yz(av) )
985
986	#if defined( __netcdf4 )
987	ELSEIF ( netcdf_data_format == 3 ) THEN
988	!
989	!-- NetCDF4/HDF5 format
990	nc_stat = NF90_CREATE( filename, &
991	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
992	id_set_yz(av), COMM = comm2d, &
993	INFO = MPI_INFO_NULL )
994
995	ELSEIF ( netcdf_data_format == 4 ) THEN
996	!
997	!-- NetCDF4/HDF5 format with classic model flag
998	nc_stat = NF90_CREATE( filename, &
999	OR( NF90_NOCLOBBER, &
1000	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
1001	id_set_yz(av), COMM = comm2d, &
1002	INFO = MPI_INFO_NULL )
1003	#endif
1004	ENDIF
1005
1006	CALL handle_netcdf_error( 'check_open', 28 )
1007
1008	!
1009	!-- Define the header
1010	CALL define_netcdf_header( 'yz', netcdf_extend, av )
1011
1012	!
1013	!-- In case of parallel NetCDF output, create flag file which tells
1014	!-- combine_plot_fields that nothing is to do.
1015	IF ( myid == 0 .AND. netcdf_data_format > 2 ) THEN
1016	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_YZ' )
1017	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
1018	CLOSE( 99 )
1019	ENDIF
1020
1021	ENDIF
1022
1023	CASE ( 104 )
1024	!
1025	!-- Set filename
1026	filename = 'DATA_1D_PR_NETCDF' // coupling_char
1027
1028	!
1029	!-- Inquire, if there is a NetCDF file from a previuos run. This should
1030	!-- be opened for extension, if its variables match the actual run.
1031	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1032
1033	IF ( netcdf_extend ) THEN
1034	!
1035	!-- Open an existing NetCDF file for output
1036	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_pr )
1037	CALL handle_netcdf_error( 'check_open', 29 )
1038	!
1039	!-- Read header information and set all ids. If there is a mismatch
1040	!-- between the previuos and the actual run, netcdf_extend is returned
1041	!-- as .FALSE.
1042	CALL define_netcdf_header( 'pr', netcdf_extend, 0 )
1043
1044	!
1045	!-- Remove the local file, if it can not be extended
1046	IF ( .NOT. netcdf_extend ) THEN
1047	nc_stat = NF90_CLOSE( id_set_pr )
1048	CALL handle_netcdf_error( 'check_open', 30 )
1049	CALL local_system( 'rm ' // TRIM( filename ) )
1050	ENDIF
1051
1052	ENDIF
1053
1054	IF ( .NOT. netcdf_extend ) THEN
1055	!
1056	!-- Create a new NetCDF output file
1057	IF ( netcdf_data_format > 1 ) THEN
1058	nc_stat = NF90_CREATE( filename, &
1059	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1060	id_set_pr )
1061	ELSE
1062	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_pr )
1063	ENDIF
1064	CALL handle_netcdf_error( 'check_open', 31 )
1065	!
1066	!-- Define the header
1067	CALL define_netcdf_header( 'pr', netcdf_extend, 0 )
1068
1069	ENDIF
1070
1071	CASE ( 105 )
1072	!
1073	!-- Set filename
1074	filename = 'DATA_1D_TS_NETCDF' // coupling_char
1075
1076	!
1077	!-- Inquire, if there is a NetCDF file from a previuos run. This should
1078	!-- be opened for extension, if its variables match the actual run.
1079	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1080
1081	IF ( netcdf_extend ) THEN
1082	!
1083	!-- Open an existing NetCDF file for output
1084	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_ts )
1085	CALL handle_netcdf_error( 'check_open', 32 )
1086	!
1087	!-- Read header information and set all ids. If there is a mismatch
1088	!-- between the previuos and the actual run, netcdf_extend is returned
1089	!-- as .FALSE.
1090	CALL define_netcdf_header( 'ts', netcdf_extend, 0 )
1091
1092	!
1093	!-- Remove the local file, if it can not be extended
1094	IF ( .NOT. netcdf_extend ) THEN
1095	nc_stat = NF90_CLOSE( id_set_ts )
1096	CALL handle_netcdf_error( 'check_open', 33 )
1097	CALL local_system( 'rm ' // TRIM( filename ) )
1098	ENDIF
1099
1100	ENDIF
1101
1102	IF ( .NOT. netcdf_extend ) THEN
1103	!
1104	!-- Create a new NetCDF output file
1105	IF ( netcdf_data_format > 1 ) THEN
1106	nc_stat = NF90_CREATE( filename, &
1107	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1108	id_set_ts )
1109	ELSE
1110	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_ts )
1111	ENDIF
1112	CALL handle_netcdf_error( 'check_open', 34 )
1113	!
1114	!-- Define the header
1115	CALL define_netcdf_header( 'ts', netcdf_extend, 0 )
1116
1117	ENDIF
1118
1119
1120	CASE ( 106, 116 )
1121	!
1122	!-- Set filename depending on unit number
1123	IF ( file_id == 106 ) THEN
1124	filename = 'DATA_3D_NETCDF' // coupling_char
1125	av = 0
1126	ELSE
1127	filename = 'DATA_3D_AV_NETCDF' // coupling_char
1128	av = 1
1129	ENDIF
1130	!
1131	!-- Inquire, if there is a NetCDF file from a previous run. This should
1132	!-- be opened for extension, if its dimensions and variables match the
1133	!-- actual run.
1134	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1135
1136	IF ( netcdf_extend ) THEN
1137	!
1138	!-- Open an existing NetCDF file for output
1139	IF ( netcdf_data_format < 3 ) THEN
1140	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_3d(av) )
1141	ELSE
1142	#if defined( __netcdf4 )
1143	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_3d(av), &
1144	COMM = comm2d, INFO = MPI_INFO_NULL )
1145	#endif
1146	ENDIF
1147	CALL handle_netcdf_error( 'check_open', 35 )
1148	!
1149	!-- Read header information and set all ids. If there is a mismatch
1150	!-- between the previuos and the actual run, netcdf_extend is returned
1151	!-- as .FALSE.
1152	CALL define_netcdf_header( '3d', netcdf_extend, av )
1153
1154	!
1155	!-- Remove the local file, if it can not be extended
1156	IF ( .NOT. netcdf_extend ) THEN
1157	nc_stat = NF90_CLOSE( id_set_3d(av) )
1158	CALL handle_netcdf_error( 'check_open', 36 )
1159	CALL local_system('rm ' // TRIM( filename ) )
1160	ENDIF
1161
1162	ENDIF
1163
1164	IF ( .NOT. netcdf_extend ) THEN
1165	!
1166	!-- Create a new NetCDF output file with requested NetCDF format
1167	IF ( netcdf_data_format == 1 ) THEN
1168	!
1169	!-- Classic NetCDF format
1170	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_3d(av) )
1171
1172	ELSEIF ( netcdf_data_format == 2 ) THEN
1173	!
1174	!-- 64bit-offset format
1175	nc_stat = NF90_CREATE( filename, &
1176	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1177	id_set_3d(av) )
1178
1179	#if defined( __netcdf4 )
1180	ELSEIF ( netcdf_data_format == 3 ) THEN
1181	!
1182	!-- NetCDF4/HDF5 format
1183	nc_stat = NF90_CREATE( filename, &
1184	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
1185	id_set_3d(av), COMM = comm2d, &
1186	INFO = MPI_INFO_NULL )
1187
1188	ELSEIF ( netcdf_data_format == 4 ) THEN
1189	!
1190	!-- NetCDF4/HDF5 format with classic model flag
1191	nc_stat = NF90_CREATE( filename, &
1192	OR( NF90_NOCLOBBER, &
1193	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
1194	id_set_3d(av), COMM = comm2d, &
1195	INFO = MPI_INFO_NULL )
1196	#endif
1197	ENDIF
1198
1199	CALL handle_netcdf_error( 'check_open', 37 )
1200
1201	!
1202	!-- Define the header
1203	CALL define_netcdf_header( '3d', netcdf_extend, av )
1204
1205	!
1206	!-- In case of parallel NetCDF output, create flag file which tells
1207	!-- combine_plot_fields that nothing is to do.
1208	IF ( myid == 0 .AND. netcdf_data_format > 2 ) THEN
1209	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_3D' )
1210	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
1211	CLOSE( 99 )
1212	ENDIF
1213
1214	ENDIF
1215
1216
1217	CASE ( 107 )
1218	!
1219	!-- Set filename
1220	filename = 'DATA_1D_SP_NETCDF' // coupling_char
1221
1222	!
1223	!-- Inquire, if there is a NetCDF file from a previuos run. This should
1224	!-- be opened for extension, if its variables match the actual run.
1225	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1226
1227	IF ( netcdf_extend ) THEN
1228	!
1229	!-- Open an existing NetCDF file for output
1230	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_sp )
1231	CALL handle_netcdf_error( 'check_open', 38 )
1232
1233	!
1234	!-- Read header information and set all ids. If there is a mismatch
1235	!-- between the previuos and the actual run, netcdf_extend is returned
1236	!-- as .FALSE.
1237	CALL define_netcdf_header( 'sp', netcdf_extend, 0 )
1238
1239	!
1240	!-- Remove the local file, if it can not be extended
1241	IF ( .NOT. netcdf_extend ) THEN
1242	nc_stat = NF90_CLOSE( id_set_sp )
1243	CALL handle_netcdf_error( 'check_open', 39 )
1244	CALL local_system( 'rm ' // TRIM( filename ) )
1245	ENDIF
1246
1247	ENDIF
1248
1249	IF ( .NOT. netcdf_extend ) THEN
1250	!
1251	!-- Create a new NetCDF output file
1252	IF ( netcdf_data_format > 1 ) THEN
1253	nc_stat = NF90_CREATE( filename, &
1254	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1255	id_set_sp )
1256	ELSE
1257	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_sp )
1258	ENDIF
1259	CALL handle_netcdf_error( 'check_open', 40 )
1260	!
1261	!-- Define the header
1262	CALL define_netcdf_header( 'sp', netcdf_extend, 0 )
1263
1264	ENDIF
1265
1266
1267	CASE ( 108 )
1268
1269	IF ( myid_char == '' ) THEN
1270	filename = 'DATA_PRT_NETCDF' // coupling_char
1271	ELSE
1272	filename = 'DATA_PRT_NETCDF' // TRIM( coupling_char ) // '/' // &
1273	myid_char
1274	ENDIF
1275	!
1276	!-- Inquire, if there is a NetCDF file from a previuos run. This should
1277	!-- be opened for extension, if its variables match the actual run.
1278	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1279
1280	IF ( netcdf_extend ) THEN
1281	!
1282	!-- Open an existing NetCDF file for output
1283	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_prt )
1284	CALL handle_netcdf_error( 'check_open', 41 )
1285	!
1286	!-- Read header information and set all ids. If there is a mismatch
1287	!-- between the previuos and the actual run, netcdf_extend is returned
1288	!-- as .FALSE.
1289	CALL define_netcdf_header( 'pt', netcdf_extend, 0 )
1290
1291	!
1292	!-- Remove the local file, if it can not be extended
1293	IF ( .NOT. netcdf_extend ) THEN
1294	nc_stat = NF90_CLOSE( id_set_prt )
1295	CALL handle_netcdf_error( 'check_open', 42 )
1296	CALL local_system( 'rm ' // filename )
1297	ENDIF
1298
1299	ENDIF
1300
1301	IF ( .NOT. netcdf_extend ) THEN
1302
1303	!
1304	!-- For runs on multiple processors create the subdirectory
1305	IF ( myid_char /= '' ) THEN
1306	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) &
1307	THEN ! needs modification in case of non-extendable sets
1308	CALL local_system( 'mkdir DATA_PRT_NETCDF' // &
1309	TRIM( coupling_char ) // '/' )
1310	ENDIF
1311	#if defined( __parallel ) .AND. .NOT. defined ( __check )
1312	!
1313	!-- Set a barrier in order to allow that all other processors in the
1314	!-- directory created by PE0 can open their file
1315	CALL MPI_BARRIER( comm2d, ierr )
1316	#endif
1317	ENDIF
1318
1319	!
1320	!-- Create a new NetCDF output file with requested NetCDF format
1321	IF ( netcdf_data_format == 1 ) THEN
1322	!
1323	!-- Classic NetCDF format
1324	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_prt )
1325
1326	ELSEIF ( netcdf_data_format == 2 ) THEN
1327	!
1328	!-- 64bit-offset format
1329	nc_stat = NF90_CREATE( filename, &
1330	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1331	id_set_prt )
1332
1333	#if defined( __netcdf4 )
1334	ELSEIF ( netcdf_data_format == 3 ) THEN
1335	!
1336	!-- NetCDF4/HDF5 format, but no parallel output into a single file!
1337	nc_stat = NF90_CREATE( filename, &
1338	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
1339	id_set_prt )
1340
1341	ELSEIF ( netcdf_data_format == 4 ) THEN
1342	!
1343	!-- NetCDF4/HDF5 format with classic model flag, but no parallel
1344	!-- output into a single file!
1345	nc_stat = NF90_CREATE( filename, &
1346	OR( NF90_NOCLOBBER, &
1347	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
1348	id_set_prt )
1349	#endif
1350	ENDIF
1351
1352	CALL handle_netcdf_error( 'check_open', 43 )
1353
1354	!
1355	!-- Define the header
1356	CALL define_netcdf_header( 'pt', netcdf_extend, 0 )
1357
1358	ENDIF
1359
1360	CASE ( 109 )
1361	!
1362	!-- Set filename
1363	filename = 'DATA_1D_PTS_NETCDF' // coupling_char
1364
1365	!
1366	!-- Inquire, if there is a NetCDF file from a previuos run. This should
1367	!-- be opened for extension, if its variables match the actual run.
1368	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1369
1370	IF ( netcdf_extend ) THEN
1371	!
1372	!-- Open an existing NetCDF file for output
1373	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_pts )
1374	CALL handle_netcdf_error( 'check_open', 393 )
1375	!
1376	!-- Read header information and set all ids. If there is a mismatch
1377	!-- between the previuos and the actual run, netcdf_extend is returned
1378	!-- as .FALSE.
1379	CALL define_netcdf_header( 'ps', netcdf_extend, 0 )
1380
1381	!
1382	!-- Remove the local file, if it can not be extended
1383	IF ( .NOT. netcdf_extend ) THEN
1384	nc_stat = NF90_CLOSE( id_set_pts )
1385	CALL handle_netcdf_error( 'check_open', 394 )
1386	CALL local_system( 'rm ' // TRIM( filename ) )
1387	ENDIF
1388
1389	ENDIF
1390
1391	IF ( .NOT. netcdf_extend ) THEN
1392	!
1393	!-- Create a new NetCDF output file
1394	IF ( netcdf_data_format > 1 ) THEN
1395	nc_stat = NF90_CREATE( filename, &
1396	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1397	id_set_pts )
1398	ELSE
1399	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_pts )
1400	ENDIF
1401	CALL handle_netcdf_error( 'check_open', 395 )
1402	!
1403	!-- Define the header
1404	CALL define_netcdf_header( 'ps', netcdf_extend, 0 )
1405
1406	ENDIF
1407
1408	CASE ( 201:200+2*max_masks )
1409	!
1410	!-- Set filename depending on unit number
1411	IF ( file_id <= 200+max_masks ) THEN
1412	mid = file_id - 200
1413	WRITE ( mask_char,'(I2.2)') mid
1414	filename = 'DATA_MASK_' // mask_char // '_NETCDF' // coupling_char
1415	av = 0
1416	ELSE
1417	mid = file_id - (200+max_masks)
1418	WRITE ( mask_char,'(I2.2)') mid
1419	filename = 'DATA_MASK_' // mask_char // '_AV_NETCDF' // &
1420	coupling_char
1421	av = 1
1422	ENDIF
1423	!
1424	!-- Inquire, if there is a NetCDF file from a previuos run. This should
1425	!-- be opened for extension, if its dimensions and variables match the
1426	!-- actual run.
1427	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1428
1429	IF ( netcdf_extend ) THEN
1430	!
1431	!-- Open an existing NetCDF file for output
1432	#if defined( __netcdf4 )
1433	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_mask(mid,av), &
1434	COMM = comm2d, INFO = MPI_INFO_NULL )
1435	#else
1436	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_mask(mid,av) )
1437	#endif
1438	CALL handle_netcdf_error( 'check_open', 456 )
1439	!
1440	!-- Read header information and set all ids. If there is a mismatch
1441	!-- between the previuos and the actual run, netcdf_extend is returned
1442	!-- as .FALSE.
1443	CALL define_netcdf_header( 'ma', netcdf_extend, file_id )
1444
1445	!
1446	!-- Remove the local file, if it can not be extended
1447	IF ( .NOT. netcdf_extend ) THEN
1448	nc_stat = NF90_CLOSE( id_set_mask(mid,av) )
1449	CALL handle_netcdf_error( 'check_open', 457 )
1450	CALL local_system('rm ' // TRIM( filename ) )
1451	ENDIF
1452
1453	ENDIF
1454
1455	IF ( .NOT. netcdf_extend ) THEN
1456	!
1457	!-- Create a new NetCDF output file with requested NetCDF format
1458	IF ( netcdf_data_format == 1 ) THEN
1459	!
1460	!-- Classic NetCDF format
1461	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, &
1462	id_set_mask(mid,av) )
1463
1464	ELSEIF ( netcdf_data_format == 2 ) THEN
1465	!
1466	!-- 64bit-offset format
1467	nc_stat = NF90_CREATE( filename, &
1468	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1469	id_set_mask(mid,av) )
1470
1471
1472	#if defined( __netcdf4 )
1473	ELSEIF ( netcdf_data_format == 3 ) THEN
1474	!
1475	!-- NetCDF4/HDF5 format
1476	nc_stat = NF90_CREATE( filename, &
1477	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
1478	id_set_mask(mid,av), COMM = comm2d, &
1479	INFO = MPI_INFO_NULL )
1480
1481	ELSEIF ( netcdf_data_format == 4 ) THEN
1482	!
1483	!-- NetCDF4/HDF5 format with classic model flag
1484	nc_stat = NF90_CREATE( filename, &
1485	OR( NF90_NOCLOBBER, &
1486	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
1487	id_set_mask(mid,av), COMM = comm2d, &
1488	INFO = MPI_INFO_NULL )
1489	#endif
1490	ENDIF
1491
1492	CALL handle_netcdf_error( 'check_open', 458 )
1493	!
1494	!-- Define the header
1495	CALL define_netcdf_header( 'ma', netcdf_extend, file_id )
1496
1497	ENDIF
1498
1499
1500	#else
1501
1502	CASE ( 101:109, 111:113, 116, 201:200+2*max_masks )
1503
1504	!
1505	!-- Nothing is done in case of missing netcdf support
1506	RETURN
1507
1508	#endif
1509
1510	CASE DEFAULT
1511
1512	WRITE( message_string, * ) 'no OPEN-statement for file-id ',file_id
1513	CALL message( 'check_open', 'PA0172', 2, 2, -1, 6, 1 )
1514
1515	END SELECT
1516
1517	!
1518	!-- Set open flag
1519	openfile(file_id)%opened = .TRUE.
1520
1521	!
1522	!-- Formats
1523	3300 FORMAT ('#'/ &
1524	'coord 1 file=',A,' filetype=unformatted'/ &
1525	'coord 2 file=',A,' filetype=unformatted skip=',I6/ &
1526	'coord 3 file=',A,' filetype=unformatted skip=',I6/ &
1527	'#')
1528	4000 FORMAT ('# ',A)
1529	5000 FORMAT ('# ',A/ &
1530	'#1 E'/'#2 E'/'#3 dt'/'#4 u'/'#5 th*'/'#6 umax'/'#7 vmax'/ &
1531	'#8 wmax'/'#9 div_new'/'#10 div_old'/'#11 z_i_wpt'/'#12 z_i_pt'/ &
1532	'#13 w*'/'#14 w''pt''0'/'#15 w''pt'''/'#16 wpt'/'#17 pt(0)'/ &
1533	'#18 pt(zp)'/'#19 splptx'/'#20 splpty'/'#21 splptz')
1534	8000 FORMAT (A/ &
1535	' step time # of parts lPE sent/recv rPE sent/recv ',&
1536	'sPE sent/recv nPE sent/recv max # of parts'/ &
1537	103('-'))
1538
1539	END SUBROUTINE check_open

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |