source: palm/trunk/SOURCE/check_open.f90 @ 674

Last change on this file since 674 was 668, checked in by suehring, 13 years ago

last commit documented

  • Property svn:keywords set to Id
File size: 55.7 KB
Line 
1SUBROUTINE check_open( file_id )
2
3!------------------------------------------------------------------------------!
4! Current revisions:
5! -----------------
6!
7! Former revisions:
8! -----------------
9! $Id: check_open.f90 668 2010-12-23 13:22:58Z suehring $
10!
11! 667 2010-12-23 12:06:00Z suehring/gryschka
12! Output of total array size was adapted to nbgp.
13!
14! 600 2010-11-24 16:10:51Z raasch
15! bugfix in opening of cross section netcdf-files (parallel opening with
16! netcdf4 only works for netcdf_data_format > 2)
17!
18! 564 2010-09-30 13:18:59Z helmke
19! start number of mask output files changed to 201, netcdf message identifiers
20! of masked output changed
21!
22! 519 2010-03-19 05:30:02Z raasch
23! NetCDF4 support for particle data
24!
25! 493 2010-03-01 08:30:24Z raasch
26! NetCDF4 support (parallel output)
27!
28! 410 2009-12-04 17:05:40Z letzel
29! masked data output
30!
31! 277 2009-03-31 09:13:47Z heinze
32! Output of NetCDF messages with aid of message handling routine.
33! Output of messages replaced by message handling routine
34!
35! 146 2008-01-17 13:08:34Z raasch
36! First opening of unit 13 openes file _0000 on all PEs (parallel version)
37! because only this file contains the global variables,
38! myid_char_14 removed
39!
40! 120 2007-10-17 11:54:43Z raasch
41! Status of 3D-volume NetCDF data file only depends on switch netcdf_64bit_3d
42!
43! 105 2007-08-08 07:12:55Z raasch
44! Different filenames are used in case of a coupled simulation,
45! coupling_char added to all relevant filenames
46!
47! 82 2007-04-16 15:40:52Z raasch
48! Call of local_getenv removed, preprocessor directives for old systems removed
49!
50! 46 2007-03-05 06:00:47Z raasch
51! +netcdf_64bit_3d to switch on 64bit offset only for 3D files
52!
53! RCS Log replace by Id keyword, revision history cleaned up
54!
55! Revision 1.44  2006/08/22 13:48:34  raasch
56! xz and yz cross sections now up to nzt+1
57!
58! Revision 1.1  1997/08/11 06:10:55  raasch
59! Initial revision
60!
61!
62! Description:
63! ------------
64! Check if file unit is open. If not, open file and, if necessary, write a
65! header or start other initializing actions, respectively.
66!------------------------------------------------------------------------------!
67
68    USE array_kind
69    USE arrays_3d
70    USE control_parameters
71    USE grid_variables
72    USE indices
73    USE netcdf_control
74    USE particle_attributes
75    USE pegrid
76    USE profil_parameter
77    USE statistics
78
79    IMPLICIT NONE
80
81    CHARACTER (LEN=2)   ::  mask_char, suffix
82    CHARACTER (LEN=20)  ::  xtext = 'time in s'
83    CHARACTER (LEN=30)  ::  filename
84    CHARACTER (LEN=40)  ::  avs_coor_file, avs_coor_file_localname, &
85                            avs_data_file_localname
86    CHARACTER (LEN=80)  ::  rtext
87    CHARACTER (LEN=100) ::  avs_coor_file_catalog, avs_data_file_catalog, &
88                            batch_scp, zeile
89    CHARACTER (LEN=400) ::  command
90
91    INTEGER ::  av, anzzeile = 1, cranz, file_id, i, iaddres, ierr1, iusern, &
92                j, k, legpos = 1, timodex = 1
93    INTEGER, DIMENSION(10) ::  cucol, klist, lstyle
94
95    LOGICAL ::  avs_coor_file_found = .FALSE., avs_data_file_found = .FALSE., &
96                datleg = .TRUE., get_filenames, grid = .TRUE., netcdf_extend, &
97                rand = .TRUE., swap = .TRUE., twoxa = .TRUE., twoya = .TRUE.
98
99    REAL ::  ansx = -999.999, ansy = -999.999, gwid = 0.1, rlegfak = 1.5, &
100             sizex = 250.0, sizey = 40.0, texfac = 1.5
101
102    REAL, DIMENSION(:), ALLOCATABLE      ::  eta, ho, hu
103    REAL(spk), DIMENSION(:), ALLOCATABLE ::  xkoor, ykoor, zkoor 
104
105
106    NAMELIST /RAHMEN/  anzzeile, cranz, datleg, rtext, swap
107    NAMELIST /CROSS/   ansx, ansy, cucol, grid, gwid, klist, legpos, lstyle, &
108                       rand, rlegfak, sizex, sizey, texfac, &
109                       timodex, twoxa, twoya, xtext
110                       
111
112!
113!-- Immediate return if file already open
114    IF ( openfile(file_id)%opened )  RETURN
115
116!
117!-- Only certain files are allowed to be re-opened
118!-- NOTE: some of the other files perhaps also could be re-opened, but it
119!--       has not been checked so far, if it works!
120    IF ( openfile(file_id)%opened_before )  THEN
121       SELECT CASE ( file_id )
122          CASE ( 13, 14, 21, 22, 23, 80:85 )
123             IF ( file_id == 14 .AND. openfile(file_id)%opened_before )  THEN
124                message_string = 're-open of unit ' // &
125                                 '14 is not verified. Please check results!'
126                CALL message( 'check_open', 'PA0165', 0, 1, 0, 6, 0 )       
127             ENDIF
128
129          CASE DEFAULT
130             WRITE( message_string, * ) 're-opening of file-id ', file_id, &
131                                        ' is not allowed'
132             CALL message( 'check_open', 'PA0166', 0, 1, 0, 6, 0 )   
133               
134             RETURN
135
136       END SELECT
137    ENDIF
138
139!
140!-- Check if file may be opened on the relevant PE
141    SELECT CASE ( file_id )
142
143       CASE ( 15, 16, 17, 18, 19, 40:49, 50:59, 81:84, 104:105, 107, 109 )
144             
145          IF ( myid /= 0 )  THEN
146             WRITE( message_string, * ) 'opening file-id ',file_id, &
147                                        ' not allowed for PE ',myid
148             CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
149          ENDIF
150
151       CASE ( 101:103, 106, 111:113, 116, 201:200+2*max_masks )
152
153          IF ( netcdf_data_format < 3 )  THEN
154         
155             IF ( myid /= 0 )  THEN
156                WRITE( message_string, * ) 'opening file-id ',file_id, &
157                                           ' not allowed for PE ',myid
158                CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
159             ENDIF
160             
161          ENDIF
162
163       CASE ( 21, 22, 23 )
164
165          IF ( .NOT.  data_output_2d_on_each_pe )  THEN
166             IF ( myid /= 0 )  THEN
167                WRITE( message_string, * ) 'opening file-id ',file_id, &
168                                           ' not allowed for PE ',myid
169                CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
170             END IF
171          ENDIF
172
173       CASE ( 27, 28, 29, 31, 32, 33, 71:73, 90:99 )
174
175!
176!--       File-ids that are used temporarily in other routines
177          WRITE( message_string, * ) 'opening file-id ',file_id, &
178                                    ' is not allowed since it is used otherwise'
179          CALL message( 'check_open', 'PA0168', 0, 1, 0, 6, 0 ) 
180         
181    END SELECT
182
183!
184!-- Open relevant files
185    SELECT CASE ( file_id )
186
187       CASE ( 11 )
188
189          OPEN ( 11, FILE='PARIN'//coupling_char, FORM='FORMATTED', &
190                     STATUS='OLD' )
191
192       CASE ( 13 )
193
194          IF ( myid_char == '' )  THEN
195             OPEN ( 13, FILE='BININ'//coupling_char//myid_char, &
196                        FORM='UNFORMATTED', STATUS='OLD' )
197          ELSE
198!
199!--          First opening of unit 13 openes file _0000 on all PEs because only
200!--          this file contains the global variables
201             IF ( .NOT. openfile(file_id)%opened_before )  THEN
202                OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/_0000',&
203                           FORM='UNFORMATTED', STATUS='OLD' )
204             ELSE
205                OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/'//myid_char,&
206                           FORM='UNFORMATTED', STATUS='OLD' )
207             ENDIF
208          ENDIF
209
210       CASE ( 14 )
211
212          IF ( myid_char == '' )  THEN
213             OPEN ( 14, FILE='BINOUT'//coupling_char//myid_char, &
214                        FORM='UNFORMATTED', POSITION='APPEND' )
215          ELSE
216             IF ( myid == 0  .AND. .NOT. openfile(file_id)%opened_before )  THEN
217                CALL local_system( 'mkdir  BINOUT' // coupling_char )
218             ENDIF
219#if defined( __parallel )
220!
221!--          Set a barrier in order to allow that all other processors in the
222!--          directory created by PE0 can open their file
223             CALL MPI_BARRIER( comm2d, ierr )
224#endif
225             OPEN ( 14, FILE='BINOUT'//TRIM(coupling_char)//'/'//myid_char, &
226                        FORM='UNFORMATTED', POSITION='APPEND' )
227          ENDIF
228
229       CASE ( 15 )
230
231          OPEN ( 15, FILE='RUN_CONTROL'//coupling_char, FORM='FORMATTED' )
232
233       CASE ( 16 )
234
235          OPEN ( 16, FILE='LIST_PROFIL'//coupling_char, FORM='FORMATTED' )
236
237       CASE ( 17 )
238
239          OPEN ( 17, FILE='LIST_PROFIL_1D'//coupling_char, FORM='FORMATTED' )
240
241       CASE ( 18 )
242
243          OPEN ( 18, FILE='CPU_MEASURES'//coupling_char, FORM='FORMATTED' )
244
245       CASE ( 19 )
246
247          OPEN ( 19, FILE='HEADER'//coupling_char, FORM='FORMATTED' )
248
249       CASE ( 20 )
250
251          IF ( myid == 0  .AND. .NOT. openfile(file_id)%opened_before )  THEN
252             CALL local_system( 'mkdir  DATA_LOG' // coupling_char )
253          ENDIF
254          IF ( myid_char == '' )  THEN
255             OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/_0000', &
256                        FORM='UNFORMATTED', POSITION='APPEND' )
257          ELSE
258#if defined( __parallel )
259!
260!--          Set a barrier in order to allow that all other processors in the
261!--          directory created by PE0 can open their file
262             CALL MPI_BARRIER( comm2d, ierr )
263#endif
264             OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/'//myid_char,&
265                        FORM='UNFORMATTED', POSITION='APPEND' )
266          ENDIF
267
268       CASE ( 21 )
269
270          IF ( data_output_2d_on_each_pe )  THEN
271             OPEN ( 21, FILE='PLOT2D_XY'//TRIM( coupling_char )//myid_char, &
272                        FORM='UNFORMATTED', POSITION='APPEND' )
273          ELSE
274             OPEN ( 21, FILE='PLOT2D_XY'//coupling_char, &
275                        FORM='UNFORMATTED', POSITION='APPEND' )
276          ENDIF
277
278          IF ( myid == 0  .AND.  .NOT. openfile(file_id)%opened_before )  THEN
279!
280!--          Output for combine_plot_fields
281             IF ( data_output_2d_on_each_pe  .AND.  myid_char /= '' )  THEN
282                WRITE (21)  -nbgp, nx+nbgp, -nbgp, ny+nbgp    ! total array size
283                WRITE (21)   0, nx+1,  0, ny+1    ! output part
284             ENDIF
285!
286!--          Determine and write ISO2D coordiante header
287             ALLOCATE( eta(0:ny+1), ho(0:nx+1), hu(0:nx+1) )
288             hu = 0.0
289             ho = (ny+1) * dy
290             DO  i = 1, ny
291                eta(i) = REAL( i ) / ( ny + 1.0 )
292             ENDDO
293             eta(0)    = 0.0
294             eta(ny+1) = 1.0
295
296             WRITE (21)  dx,eta,hu,ho
297             DEALLOCATE( eta, ho, hu )
298
299!
300!--          Create output file for local parameters
301             IF ( iso2d_output )  THEN
302                OPEN ( 27, FILE='PLOT2D_XY_LOCAL'//coupling_char, &
303                           FORM='FORMATTED', DELIM='APOSTROPHE' )
304                openfile(27)%opened = .TRUE.
305             ENDIF
306
307          ENDIF
308
309       CASE ( 22 )
310
311          IF ( data_output_2d_on_each_pe )  THEN
312             OPEN ( 22, FILE='PLOT2D_XZ'//TRIM( coupling_char )//myid_char, &
313                        FORM='UNFORMATTED', POSITION='APPEND' )
314          ELSE
315             OPEN ( 22, FILE='PLOT2D_XZ'//coupling_char, FORM='UNFORMATTED', &
316                        POSITION='APPEND' )
317          ENDIF
318
319          IF ( myid == 0  .AND.  .NOT. openfile(file_id)%opened_before )  THEN
320!
321!--          Output for combine_plot_fields
322             IF ( data_output_2d_on_each_pe  .AND.  myid_char /= '' )  THEN
323                WRITE (22)  -nbgp, nx+nbgp, 0, nz+1    ! total array size
324                WRITE (22)   0, nx+1, 0, nz+1    ! output part
325             ENDIF
326!
327!--          Determine and write ISO2D coordiante header
328             ALLOCATE( eta(0:nz+1), ho(0:nx+1), hu(0:nx+1) )
329             hu = 0.0
330             ho = zu(nz+1)
331             DO  i = 1, nz
332                eta(i) = REAL( zu(i) ) / zu(nz+1)
333             ENDDO
334             eta(0)    = 0.0
335             eta(nz+1) = 1.0
336
337             WRITE (22)  dx,eta,hu,ho
338             DEALLOCATE( eta, ho, hu )
339!
340!--          Create output file for local parameters
341             OPEN ( 28, FILE='PLOT2D_XZ_LOCAL'//coupling_char, &
342                        FORM='FORMATTED', DELIM='APOSTROPHE' )
343             openfile(28)%opened = .TRUE.
344
345          ENDIF
346
347       CASE ( 23 )
348
349          IF ( data_output_2d_on_each_pe )  THEN
350             OPEN ( 23, FILE='PLOT2D_YZ'//TRIM( coupling_char )//myid_char, &
351                        FORM='UNFORMATTED', POSITION='APPEND' )
352          ELSE
353             OPEN ( 23, FILE='PLOT2D_YZ'//coupling_char, FORM='UNFORMATTED', &
354                        POSITION='APPEND' )
355          ENDIF
356
357          IF ( myid == 0  .AND.  .NOT. openfile(file_id)%opened_before )  THEN
358!
359!--          Output for combine_plot_fields
360             IF ( data_output_2d_on_each_pe  .AND.  myid_char /= '' )  THEN
361                WRITE (23)  -nbgp, ny+nbgp, 0, nz+1    ! total array size
362                WRITE (23)   0, ny+1, 0, nz+1    ! output part
363             ENDIF
364!
365!--          Determine and write ISO2D coordiante header
366             ALLOCATE( eta(0:nz+1), ho(0:ny+1), hu(0:ny+1) )
367             hu = 0.0
368             ho = zu(nz+1)
369             DO  i = 1, nz
370                eta(i) = REAL( zu(i) ) / zu(nz+1)
371             ENDDO
372             eta(0)    = 0.0
373             eta(nz+1) = 1.0
374
375             WRITE (23)  dx,eta,hu,ho
376             DEALLOCATE( eta, ho, hu )
377!
378!--          Create output file for local parameters
379             OPEN ( 29, FILE='PLOT2D_YZ_LOCAL'//coupling_char, &
380                        FORM='FORMATTED', DELIM='APOSTROPHE' )
381             openfile(29)%opened = .TRUE.
382
383          ENDIF
384
385       CASE ( 30 )
386
387          OPEN ( 30, FILE='PLOT3D_DATA'//TRIM( coupling_char )//myid_char, &
388                     FORM='UNFORMATTED' )
389!
390!--       Write coordinate file for AVS
391          IF ( myid == 0 )  THEN
392#if defined( __parallel )
393!
394!--          Specifications for combine_plot_fields
395             IF ( .NOT. do3d_compress )  THEN
396                WRITE ( 30 )  -nbgp,nx+nbgp,-nbgp,ny+nbgp, 0 ,nz_do3d
397                WRITE ( 30 )  0,nx+1,0,ny+1,0,nz_do3d
398             ENDIF
399#endif
400!
401!--          Write coordinate file for AVS:
402!--          First determine file names (including cyle numbers) of AVS files on
403!--          target machine (to which the files are to be transferred).
404!--          Therefore path information has to be obtained first.
405             IF ( avs_output )  THEN
406                iaddres = LEN_TRIM( return_addres )
407                iusern  = LEN_TRIM( return_username )
408
409                OPEN ( 3, FILE='OUTPUT_FILE_CONNECTIONS', FORM='FORMATTED' )
410                DO  WHILE ( .NOT. avs_coor_file_found  .OR. &
411                            .NOT. avs_data_file_found )
412
413                   READ ( 3, '(A)', END=1 )  zeile
414
415                   SELECT CASE ( zeile(1:11) )
416
417                      CASE ( 'PLOT3D_COOR' )
418                         READ ( 3, '(A/A)' )  avs_coor_file_catalog, &
419                                              avs_coor_file_localname
420                         avs_coor_file_found = .TRUE.
421
422                      CASE ( 'PLOT3D_DATA' )
423                         READ ( 3, '(A/A)' )  avs_data_file_catalog, &
424                                              avs_data_file_localname
425                         avs_data_file_found = .TRUE.
426
427                      CASE DEFAULT
428                         READ ( 3, '(A/A)' )  zeile, zeile
429
430                   END SELECT
431
432                ENDDO
433!
434!--             Now the cycle numbers on the remote machine must be obtained
435!--             using batch_scp
436       1        CLOSE ( 3 )
437                IF ( .NOT. avs_coor_file_found  .OR. &
438                     .NOT. avs_data_file_found )  THEN
439                   message_string= 'no filename for AVS-data-file ' //       &
440                                   'found in MRUN-config-file' //            &
441                                   ' &filename in FLD-file set to "unknown"'
442                   CALL message( 'check_open', 'PA0169', 0, 1, 0, 6, 0 )
443
444                   avs_coor_file = 'unknown'
445                   avs_data_file = 'unknown'
446                ELSE
447                   get_filenames = .TRUE.
448                   IF ( TRIM( host ) == 'hpmuk'  .OR.  &
449                        TRIM( host ) == 'lcmuk' )  THEN
450                      batch_scp = '/home/raasch/pub/batch_scp'
451                   ELSEIF ( TRIM( host ) == 'nech' )  THEN
452                      batch_scp = '/ipf/b/b323011/pub/batch_scp'
453                   ELSEIF ( TRIM( host ) == 'ibmh'  .OR.  &
454                            TRIM( host ) == 'ibmb' )  THEN
455                      batch_scp = '/home/h/niksiraa/pub/batch_scp'
456                   ELSEIF ( TRIM( host ) == 't3eb' )  THEN
457                      batch_scp = '/home/nhbksira/pub/batch_scp'
458                   ELSE
459                      message_string= 'no path for batch_scp on host "' // &
460                                       TRIM( host ) // '"'
461                      CALL message( 'check_open', 'PA0170', 0, 1, 0, 6, 0 )
462                      get_filenames = .FALSE.
463                   ENDIF
464
465                   IF ( get_filenames )  THEN
466!
467!--                   Determine the coordinate file name.
468!--                   /etc/passwd serves as Dummy-Datei, because it is not
469!--                   really transferred.
470                      command = TRIM( batch_scp ) // ' -n -u ' // &
471                         return_username(1:iusern) // ' ' // &
472                         return_addres(1:iaddres) // ' /etc/passwd "' // &
473                         TRIM( avs_coor_file_catalog ) // '" ' // &
474                         TRIM( avs_coor_file_localname ) // ' > REMOTE_FILENAME'
475
476                      CALL local_system( command )
477                      OPEN ( 3, FILE='REMOTE_FILENAME', FORM='FORMATTED' )
478                      READ ( 3, '(A)' )  avs_coor_file
479                      CLOSE ( 3 )
480!
481!--                   Determine the data file name
482                      command = TRIM( batch_scp ) // ' -n -u ' // &
483                         return_username(1:iusern) // ' ' // &
484                         return_addres(1:iaddres) // ' /etc/passwd "' // &
485                         TRIM( avs_data_file_catalog ) // '" ' // &
486                         TRIM( avs_data_file_localname ) // ' > REMOTE_FILENAME'
487
488                      CALL local_system( command )
489                      OPEN ( 3, FILE='REMOTE_FILENAME', FORM='FORMATTED' )
490                      READ ( 3, '(A)' )  avs_data_file
491                      CLOSE ( 3 )
492
493                   ELSE
494
495                      avs_coor_file = 'unknown'
496                      avs_data_file = 'unknown'
497
498                   ENDIF
499
500                ENDIF
501
502!
503!--             Output of the coordinate file description for FLD-file
504                OPEN ( 33, FILE='PLOT3D_FLD_COOR', FORM='FORMATTED' )
505                openfile(33)%opened = .TRUE.
506                WRITE ( 33, 3300 )  TRIM( avs_coor_file ), &
507                                    TRIM( avs_coor_file ), (nx+2*nbgp)*4, &
508                                    TRIM( avs_coor_file ), (nx+2*nbgp)*4+(ny+2*nbgp)*4
509           
510
511                ALLOCATE( xkoor(0:nx+1), ykoor(0:ny+1), zkoor(0:nz_do3d) )
512                DO  i = 0, nx+1
513                   xkoor(i) = i * dx
514                ENDDO
515                DO  j = 0, ny+1
516                   ykoor(j) = j * dy
517                ENDDO
518                DO  k = 0, nz_do3d
519                   zkoor(k) = zu(k)
520                ENDDO
521
522!
523!--             Create and write on AVS coordinate file
524                OPEN ( 31, FILE='PLOT3D_COOR', FORM='UNFORMATTED' )
525                openfile(31)%opened = .TRUE.
526
527                WRITE (31)  xkoor, ykoor, zkoor
528                DEALLOCATE( xkoor, ykoor, zkoor )
529
530!
531!--             Create FLD file (being written on in close_file)
532                OPEN ( 32, FILE='PLOT3D_FLD', FORM='FORMATTED' )
533                openfile(32)%opened = .TRUE.
534
535!
536!--             Create flag file for compressed 3D output,
537!--             influences output commands in mrun
538                IF ( do3d_compress )  THEN
539                   OPEN ( 3, FILE='PLOT3D_COMPRESSED', FORM='FORMATTED' )
540                   WRITE ( 3, '(1X)' )
541                   CLOSE ( 3 )
542                ENDIF
543
544             ENDIF
545
546          ENDIF
547
548!
549!--       In case of data compression output of the coordinates of the
550!--       corresponding partial array of a PE only once at the top of the file
551          IF ( avs_output  .AND.  do3d_compress )  THEN
552             WRITE ( 30 )  nxlg, nxrg, nysg, nyng, nzb, nz_do3d
553          ENDIF
554
555       CASE ( 40:49 )
556
557          IF ( statistic_regions == 0  .AND.  file_id == 40 )  THEN
558             suffix = ''
559          ELSE
560             WRITE ( suffix, '(''_'',I1)' )  file_id - 40
561          ENDIF
562          OPEN ( file_id, FILE='PLOT1D_DATA'//TRIM( coupling_char )// &
563                               TRIM( suffix ),                        &
564                          FORM='FORMATTED' )
565!
566!--       Write contents comments at the top of the file
567          WRITE ( file_id, 4000 )  TRIM( run_description_header ) // '    ' // &
568                                   TRIM( region( file_id - 40 ) )
569
570       CASE ( 50:59 )
571
572          IF ( statistic_regions == 0  .AND.  file_id == 50 )  THEN
573             suffix = ''
574          ELSE
575             WRITE ( suffix, '(''_'',I1)' )  file_id - 50
576          ENDIF
577          OPEN ( file_id, FILE='PLOTTS_DATA'//TRIM( coupling_char )// &
578                               TRIM( suffix ),                        &
579                          FORM='FORMATTED', RECL=496 )
580!
581!--       Write PROFIL parameter file for output of time series
582!--       NOTE: To be on the safe side, this output is done at the beginning of
583!--             the model run (in case of collapse) and it is repeated in
584!--             close_file, then, however, with value ranges for the coordinate
585!--             systems
586!
587!--       Firstly determine the number of the coordinate systems to be drawn
588          cranz = 0
589          DO  j = 1, 10
590             IF ( cross_ts_number_count(j) /= 0 )  cranz = cranz+1
591          ENDDO
592          rtext = '\1.0 ' // TRIM( run_description_header ) // '    ' // &
593                  TRIM( region( file_id - 50 ) )
594!
595!--       Write RAHMEN parameter
596          OPEN ( 90, FILE='PLOTTS_PAR'//TRIM( coupling_char )// &
597                           TRIM( suffix ),                      &
598                     FORM='FORMATTED', DELIM='APOSTROPHE' )
599          WRITE ( 90, RAHMEN )
600!
601!--       Determine and write CROSS parameters for the individual coordinate
602!--       systems
603          DO  j = 1, 10
604             k = cross_ts_number_count(j)
605             IF ( k /= 0 )  THEN
606!
607!--             Store curve numbers, colours and line style
608                klist(1:k) = cross_ts_numbers(1:k,j)
609                klist(k+1:10) = 999999
610                cucol(1:k) = linecolors(1:k)
611                lstyle(1:k) = linestyles(1:k)
612!
613!--             Write CROSS parameter
614                WRITE ( 90, CROSS )
615
616             ENDIF
617          ENDDO
618
619          CLOSE ( 90 )
620!
621!--       Write all labels at the top of the data file, but only during the
622!--       first run of a sequence of jobs. The following jobs copy the time
623!--       series data to the bottom of that file.
624          IF ( runnr == 0 )  THEN
625             WRITE ( file_id, 5000 )  TRIM( run_description_header ) // &
626                                      '    ' // TRIM( region( file_id - 50 ) )
627          ENDIF
628
629
630       CASE ( 80 )
631
632          IF ( myid_char == '' )  THEN
633             OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM(coupling_char)//myid_char, &
634                        FORM='FORMATTED', POSITION='APPEND' )
635          ELSE
636             IF ( myid == 0  .AND.  .NOT. openfile(80)%opened_before )  THEN
637                CALL local_system( 'mkdir  PARTICLE_INFOS' // coupling_char )
638             ENDIF
639#if defined( __parallel )
640!
641!--          Set a barrier in order to allow that thereafter all other
642!--          processors in the directory created by PE0 can open their file.
643!--          WARNING: The following barrier will lead to hanging jobs, if
644!--                   check_open is first called from routine
645!--                   allocate_prt_memory!
646             IF ( .NOT. openfile(80)%opened_before )  THEN
647                CALL MPI_BARRIER( comm2d, ierr )
648             ENDIF
649#endif
650             OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM( coupling_char )//'/'// &
651                             myid_char,                                     &
652                        FORM='FORMATTED', POSITION='APPEND' )
653          ENDIF
654
655          IF ( .NOT. openfile(80)%opened_before )  THEN
656             WRITE ( 80, 8000 )  TRIM( run_description_header )
657          ENDIF
658
659       CASE ( 81 )
660
661             OPEN ( 81, FILE='PLOTSP_X_PAR'//coupling_char, FORM='FORMATTED', &
662                        DELIM='APOSTROPHE', RECL=1500, POSITION='APPEND' )
663
664       CASE ( 82 )
665
666             OPEN ( 82, FILE='PLOTSP_X_DATA'//coupling_char, FORM='FORMATTED', &
667                        POSITION = 'APPEND' )
668
669       CASE ( 83 )
670
671             OPEN ( 83, FILE='PLOTSP_Y_PAR'//coupling_char, FORM='FORMATTED', &
672                        DELIM='APOSTROPHE', RECL=1500, POSITION='APPEND' )
673
674       CASE ( 84 )
675
676             OPEN ( 84, FILE='PLOTSP_Y_DATA'//coupling_char, FORM='FORMATTED', &
677                        POSITION='APPEND' )
678
679       CASE ( 85 )
680
681          IF ( myid_char == '' )  THEN
682             OPEN ( 85, FILE='PARTICLE_DATA'//TRIM(coupling_char)//myid_char, &
683                        FORM='UNFORMATTED', POSITION='APPEND' )
684          ELSE
685             IF ( myid == 0  .AND.  .NOT. openfile(85)%opened_before )  THEN
686                CALL local_system( 'mkdir  PARTICLE_DATA' // coupling_char )
687             ENDIF
688#if defined( __parallel )
689!
690!--          Set a barrier in order to allow that thereafter all other
691!--          processors in the directory created by PE0 can open their file
692             CALL MPI_BARRIER( comm2d, ierr )
693#endif
694             OPEN ( 85, FILE='PARTICLE_DATA'//TRIM( coupling_char )//'/'// &
695                        myid_char,                                         &
696                        FORM='UNFORMATTED', POSITION='APPEND' )
697          ENDIF
698
699          IF ( .NOT. openfile(85)%opened_before )  THEN
700             WRITE ( 85 )  run_description_header
701!
702!--          Attention: change version number whenever the output format on
703!--                     unit 85 is changed (see also in routine advec_particles)
704             rtext = 'data format version 3.0'
705             WRITE ( 85 )  rtext
706             WRITE ( 85 )  number_of_particle_groups, &
707                           max_number_of_particle_groups
708             WRITE ( 85 )  particle_groups
709          ENDIF
710
711#if defined( __netcdf )
712       CASE ( 101, 111 )
713!
714!--       Set filename depending on unit number
715          IF ( file_id == 101 )  THEN
716             filename = 'DATA_2D_XY_NETCDF' // coupling_char
717             av = 0
718          ELSE
719             filename = 'DATA_2D_XY_AV_NETCDF' // coupling_char
720             av = 1
721          ENDIF
722!
723!--       Inquire, if there is a NetCDF file from a previuos run. This should
724!--       be opened for extension, if its dimensions and variables match the
725!--       actual run.
726          INQUIRE( FILE=filename, EXIST=netcdf_extend )
727
728          IF ( netcdf_extend )  THEN
729!
730!--          Open an existing NetCDF file for output
731             IF ( netcdf_data_format < 3 )  THEN
732                nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_xy(av) )
733             ELSE
734#if defined( __netcdf4 )
735                nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_xy(av), &
736                                     COMM = comm2d, INFO = MPI_INFO_NULL )
737#endif
738             ENDIF
739
740             CALL handle_netcdf_error( 'check_open', 20 )
741!
742!--          Read header information and set all ids. If there is a mismatch
743!--          between the previuos and the actual run, netcdf_extend is returned
744!--          as .FALSE.
745             CALL define_netcdf_header( 'xy', netcdf_extend, av )
746
747!
748!--          Remove the local file, if it can not be extended
749             IF ( .NOT. netcdf_extend )  THEN
750                nc_stat = NF90_CLOSE( id_set_xy(av) )
751                CALL handle_netcdf_error( 'check_open', 21 )
752                IF ( myid == 0 )  CALL local_system( 'rm ' // TRIM( filename ) )
753             ENDIF
754
755          ENDIF         
756
757          IF ( .NOT. netcdf_extend )  THEN
758!
759!--          Create a new NetCDF output file with requested NetCDF format
760             IF ( netcdf_data_format == 1 )  THEN
761!
762!--             Classic NetCDF format
763                nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_xy(av) )
764
765             ELSEIF ( netcdf_data_format == 2 )  THEN
766!
767!--             64bit-offset format
768                nc_stat = NF90_CREATE( filename,                               &
769                                       OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
770                                       id_set_xy(av) )
771
772#if defined( __netcdf4 )
773             ELSEIF ( netcdf_data_format == 3 )  THEN
774!
775!--             NetCDF4/HDF5 format
776                nc_stat = NF90_CREATE( filename,                               &
777                                       OR( NF90_NOCLOBBER, NF90_NETCDF4 ),     &
778                                       id_set_xy(av), COMM = comm2d,           &
779                                       INFO = MPI_INFO_NULL )
780
781             ELSEIF ( netcdf_data_format == 4 )  THEN
782!
783!--             NetCDF4/HDF5 format with classic model flag
784                nc_stat = NF90_CREATE( filename,                               &
785                                       OR( NF90_NOCLOBBER,                     &
786                                        OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
787                                       id_set_xy(av), COMM = comm2d,           &
788                                       INFO = MPI_INFO_NULL )
789#endif
790             ENDIF
791
792             CALL handle_netcdf_error( 'check_open', 22 )
793
794!
795!--          Define the header
796             CALL define_netcdf_header( 'xy', netcdf_extend, av )
797
798!
799!--          In case of parallel NetCDF output, create flag file which tells
800!--          combine_plot_fields that nothing is to do.
801             IF ( myid == 0  .AND.  netcdf_data_format > 2 )  THEN
802                OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_XY' )
803                WRITE ( 99, '(A)' )  'no combine_plot_fields.x neccessary'
804                CLOSE( 99 )
805             ENDIF
806
807          ENDIF
808
809       CASE ( 102, 112 )
810!
811!--       Set filename depending on unit number
812          IF ( file_id == 102 )  THEN
813             filename = 'DATA_2D_XZ_NETCDF' // coupling_char
814             av = 0
815          ELSE
816             filename = 'DATA_2D_XZ_AV_NETCDF' // coupling_char
817             av = 1
818          ENDIF
819!
820!--       Inquire, if there is a NetCDF file from a previuos run. This should
821!--       be opened for extension, if its dimensions and variables match the
822!--       actual run.
823          INQUIRE( FILE=filename, EXIST=netcdf_extend )
824
825          IF ( netcdf_extend )  THEN
826!
827!--          Open an existing NetCDF file for output
828             IF ( netcdf_data_format < 3 )  THEN
829                nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_xz(av) )
830             ELSE
831#if defined( __netcdf4 )
832                nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_xz(av), &
833                                     COMM = comm2d, INFO = MPI_INFO_NULL )
834#endif
835             ENDIF
836
837             CALL handle_netcdf_error( 'check_open', 23 )
838!
839!--          Read header information and set all ids. If there is a mismatch
840!--          between the previuos and the actual run, netcdf_extend is returned
841!--          as .FALSE.
842             CALL define_netcdf_header( 'xz', netcdf_extend, av )
843
844!
845!--          Remove the local file, if it can not be extended
846             IF ( .NOT. netcdf_extend )  THEN
847                nc_stat = NF90_CLOSE( id_set_xz(av) )
848                CALL handle_netcdf_error( 'check_open', 24 )
849                IF ( myid == 0 )  CALL local_system( 'rm ' // TRIM( filename ) )
850             ENDIF
851
852          ENDIF         
853
854          IF ( .NOT. netcdf_extend )  THEN
855!
856!--          Create a new NetCDF output file with requested NetCDF format
857             IF ( netcdf_data_format == 1 )  THEN
858!
859!--             Classic NetCDF format
860                nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_xz(av) )
861
862             ELSEIF ( netcdf_data_format == 2 )  THEN
863!
864!--             64bit-offset format
865                nc_stat = NF90_CREATE( filename,                               &
866                                       OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
867                                       id_set_xz(av) )
868
869#if defined( __netcdf4 )
870             ELSEIF ( netcdf_data_format == 3 )  THEN
871!
872!--             NetCDF4/HDF5 format
873                nc_stat = NF90_CREATE( filename,                               &
874                                       OR( NF90_NOCLOBBER, NF90_NETCDF4 ),     &
875                                       id_set_xz(av), COMM = comm2d,           &
876                                       INFO = MPI_INFO_NULL )
877
878             ELSEIF ( netcdf_data_format == 4 )  THEN
879!
880!--             NetCDF4/HDF5 format with classic model flag
881                nc_stat = NF90_CREATE( filename,                               &
882                                       OR( NF90_NOCLOBBER,                     &
883                                        OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
884                                       id_set_xz(av), COMM = comm2d,           &
885                                       INFO = MPI_INFO_NULL )
886#endif
887             ENDIF
888
889             CALL handle_netcdf_error( 'check_open', 25 )
890
891!
892!--          Define the header
893             CALL define_netcdf_header( 'xz', netcdf_extend, av )
894
895!
896!--          In case of parallel NetCDF output, create flag file which tells
897!--          combine_plot_fields that nothing is to do.
898             IF ( myid == 0  .AND.  netcdf_data_format > 2 )  THEN
899                OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_XZ' )
900                WRITE ( 99, '(A)' )  'no combine_plot_fields.x neccessary'
901                CLOSE( 99 )
902             ENDIF
903
904          ENDIF
905
906       CASE ( 103, 113 )
907!
908!--       Set filename depending on unit number
909          IF ( file_id == 103 )  THEN
910             filename = 'DATA_2D_YZ_NETCDF' // coupling_char
911             av = 0
912          ELSE
913             filename = 'DATA_2D_YZ_AV_NETCDF' // coupling_char
914             av = 1
915          ENDIF
916!
917!--       Inquire, if there is a NetCDF file from a previuos run. This should
918!--       be opened for extension, if its dimensions and variables match the
919!--       actual run.
920          INQUIRE( FILE=filename, EXIST=netcdf_extend )
921
922          IF ( netcdf_extend )  THEN
923!
924!--          Open an existing NetCDF file for output
925             IF ( netcdf_data_format < 3 )  THEN
926                nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_yz(av) )
927             ELSE
928#if defined( __netcdf4 )
929                nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_yz(av), &
930                                     COMM = comm2d, INFO = MPI_INFO_NULL )
931#endif
932             ENDIF
933             
934             CALL handle_netcdf_error( 'check_open', 26 )
935!
936!--          Read header information and set all ids. If there is a mismatch
937!--          between the previuos and the actual run, netcdf_extend is returned
938!--          as .FALSE.
939             CALL define_netcdf_header( 'yz', netcdf_extend, av )
940
941!
942!--          Remove the local file, if it can not be extended
943             IF ( .NOT. netcdf_extend )  THEN
944                nc_stat = NF90_CLOSE( id_set_yz(av) )
945                CALL handle_netcdf_error( 'check_open', 27 )
946                IF ( myid == 0 )  CALL local_system( 'rm ' // TRIM( filename ) )
947             ENDIF
948
949          ENDIF         
950
951          IF ( .NOT. netcdf_extend )  THEN
952!
953!--          Create a new NetCDF output file with requested NetCDF format
954             IF ( netcdf_data_format == 1 )  THEN
955!
956!--             Classic NetCDF format
957                nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_yz(av) )
958
959             ELSEIF ( netcdf_data_format == 2 )  THEN
960!
961!--             64bit-offset format
962                nc_stat = NF90_CREATE( filename,                               &
963                                       OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
964                                       id_set_yz(av) )
965
966#if defined( __netcdf4 )
967             ELSEIF ( netcdf_data_format == 3 )  THEN
968!
969!--             NetCDF4/HDF5 format
970                nc_stat = NF90_CREATE( filename,                               &
971                                       OR( NF90_NOCLOBBER, NF90_NETCDF4 ),     &
972                                       id_set_yz(av), COMM = comm2d,           &
973                                       INFO = MPI_INFO_NULL )
974
975             ELSEIF ( netcdf_data_format == 4 )  THEN
976!
977!--             NetCDF4/HDF5 format with classic model flag
978                nc_stat = NF90_CREATE( filename,                               &
979                                       OR( NF90_NOCLOBBER,                     &
980                                        OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
981                                       id_set_yz(av), COMM = comm2d,           &
982                                       INFO = MPI_INFO_NULL )
983#endif
984             ENDIF
985
986             CALL handle_netcdf_error( 'check_open', 28 )
987
988!
989!--          Define the header
990             CALL define_netcdf_header( 'yz', netcdf_extend, av )
991
992!
993!--          In case of parallel NetCDF output, create flag file which tells
994!--          combine_plot_fields that nothing is to do.
995             IF ( myid == 0  .AND.  netcdf_data_format > 2 )  THEN
996                OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_YZ' )
997                WRITE ( 99, '(A)' )  'no combine_plot_fields.x neccessary'
998                CLOSE( 99 )
999             ENDIF
1000
1001          ENDIF
1002
1003       CASE ( 104 )
1004!
1005!--       Set filename
1006          filename = 'DATA_1D_PR_NETCDF' // coupling_char
1007
1008!
1009!--       Inquire, if there is a NetCDF file from a previuos run. This should
1010!--       be opened for extension, if its variables match the actual run.
1011          INQUIRE( FILE=filename, EXIST=netcdf_extend )
1012
1013          IF ( netcdf_extend )  THEN
1014!
1015!--          Open an existing NetCDF file for output
1016             nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_pr )
1017             CALL handle_netcdf_error( 'check_open', 29 )
1018!
1019!--          Read header information and set all ids. If there is a mismatch
1020!--          between the previuos and the actual run, netcdf_extend is returned
1021!--          as .FALSE.
1022             CALL define_netcdf_header( 'pr', netcdf_extend, 0 )
1023
1024!
1025!--          Remove the local file, if it can not be extended
1026             IF ( .NOT. netcdf_extend )  THEN
1027                nc_stat = NF90_CLOSE( id_set_pr )
1028                CALL handle_netcdf_error( 'check_open', 30 )
1029                CALL local_system( 'rm ' // TRIM( filename ) )
1030             ENDIF
1031
1032          ENDIF         
1033
1034          IF ( .NOT. netcdf_extend )  THEN
1035!
1036!--          Create a new NetCDF output file
1037             IF ( netcdf_data_format > 1 )  THEN
1038                nc_stat = NF90_CREATE( filename,                               &
1039                                       OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1040                                       id_set_pr )
1041             ELSE
1042                nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_pr )
1043             ENDIF
1044             CALL handle_netcdf_error( 'check_open', 31 )
1045!
1046!--          Define the header
1047             CALL define_netcdf_header( 'pr', netcdf_extend, 0 )
1048
1049          ENDIF
1050
1051       CASE ( 105 )
1052!
1053!--       Set filename
1054          filename = 'DATA_1D_TS_NETCDF' // coupling_char
1055
1056!
1057!--       Inquire, if there is a NetCDF file from a previuos run. This should
1058!--       be opened for extension, if its variables match the actual run.
1059          INQUIRE( FILE=filename, EXIST=netcdf_extend )
1060
1061          IF ( netcdf_extend )  THEN
1062!
1063!--          Open an existing NetCDF file for output
1064             nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_ts )
1065             CALL handle_netcdf_error( 'check_open', 32 )
1066!
1067!--          Read header information and set all ids. If there is a mismatch
1068!--          between the previuos and the actual run, netcdf_extend is returned
1069!--          as .FALSE.
1070             CALL define_netcdf_header( 'ts', netcdf_extend, 0 )
1071
1072!
1073!--          Remove the local file, if it can not be extended
1074             IF ( .NOT. netcdf_extend )  THEN
1075                nc_stat = NF90_CLOSE( id_set_ts )
1076                CALL handle_netcdf_error( 'check_open', 33 )
1077                CALL local_system( 'rm ' // TRIM( filename ) )
1078             ENDIF
1079
1080          ENDIF         
1081
1082          IF ( .NOT. netcdf_extend )  THEN
1083!
1084!--          Create a new NetCDF output file
1085             IF ( netcdf_data_format > 1 )  THEN
1086                nc_stat = NF90_CREATE( filename,                               &
1087                                       OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1088                                       id_set_ts )
1089             ELSE
1090                nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_ts )
1091             ENDIF
1092             CALL handle_netcdf_error( 'check_open', 34 )
1093!
1094!--          Define the header
1095             CALL define_netcdf_header( 'ts', netcdf_extend, 0 )
1096
1097          ENDIF
1098
1099
1100       CASE ( 106, 116 )
1101!
1102!--       Set filename depending on unit number
1103          IF ( file_id == 106 )  THEN
1104             filename = 'DATA_3D_NETCDF' // coupling_char
1105             av = 0
1106          ELSE
1107             filename = 'DATA_3D_AV_NETCDF' // coupling_char
1108             av = 1
1109          ENDIF
1110!
1111!--       Inquire, if there is a NetCDF file from a previous run. This should
1112!--       be opened for extension, if its dimensions and variables match the
1113!--       actual run.
1114          INQUIRE( FILE=filename, EXIST=netcdf_extend )
1115
1116          IF ( netcdf_extend )  THEN
1117!
1118!--          Open an existing NetCDF file for output
1119#if defined( __netcdf4 )
1120             nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_3d(av), &
1121                                  COMM = comm2d, INFO = MPI_INFO_NULL )
1122#else
1123             nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_3d(av) )
1124#endif
1125             CALL handle_netcdf_error( 'check_open', 35 )
1126!
1127!--          Read header information and set all ids. If there is a mismatch
1128!--          between the previuos and the actual run, netcdf_extend is returned
1129!--          as .FALSE.
1130             CALL define_netcdf_header( '3d', netcdf_extend, av )
1131
1132!
1133!--          Remove the local file, if it can not be extended
1134             IF ( .NOT. netcdf_extend )  THEN
1135                nc_stat = NF90_CLOSE( id_set_3d(av) )
1136                CALL handle_netcdf_error( 'check_open', 36 )
1137                CALL local_system('rm ' // TRIM( filename ) )
1138             ENDIF
1139
1140          ENDIF         
1141
1142          IF ( .NOT. netcdf_extend )  THEN
1143!
1144!--          Create a new NetCDF output file with requested NetCDF format
1145             IF ( netcdf_data_format == 1 )  THEN
1146!
1147!--             Classic NetCDF format
1148                nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_3d(av) )
1149
1150             ELSEIF ( netcdf_data_format == 2 )  THEN
1151!
1152!--             64bit-offset format
1153                nc_stat = NF90_CREATE( filename,                               &
1154                                       OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1155                                       id_set_3d(av) )
1156
1157#if defined( __netcdf4 )
1158             ELSEIF ( netcdf_data_format == 3 )  THEN
1159!
1160!--             NetCDF4/HDF5 format
1161                nc_stat = NF90_CREATE( filename,                               &
1162                                       OR( NF90_NOCLOBBER, NF90_NETCDF4 ),     &
1163                                       id_set_3d(av), COMM = comm2d,           &
1164                                       INFO = MPI_INFO_NULL )
1165
1166             ELSEIF ( netcdf_data_format == 4 )  THEN
1167!
1168!--             NetCDF4/HDF5 format with classic model flag
1169                nc_stat = NF90_CREATE( filename,                               &
1170                                       OR( NF90_NOCLOBBER,                     &
1171                                        OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
1172                                       id_set_3d(av), COMM = comm2d,           &
1173                                       INFO = MPI_INFO_NULL )
1174#endif
1175             ENDIF
1176
1177             CALL handle_netcdf_error( 'check_open', 37 )
1178
1179!
1180!--          Define the header
1181             CALL define_netcdf_header( '3d', netcdf_extend, av )
1182
1183!
1184!--          In case of parallel NetCDF output, create flag file which tells
1185!--          combine_plot_fields that nothing is to do.
1186             IF ( myid == 0  .AND.  netcdf_data_format > 2 )  THEN
1187                OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_3D' )
1188                WRITE ( 99, '(A)' )  'no combine_plot_fields.x neccessary'
1189                CLOSE( 99 )
1190             ENDIF
1191
1192          ENDIF
1193
1194
1195       CASE ( 107 )
1196!
1197!--       Set filename
1198          filename = 'DATA_1D_SP_NETCDF' // coupling_char
1199
1200!
1201!--       Inquire, if there is a NetCDF file from a previuos run. This should
1202!--       be opened for extension, if its variables match the actual run.
1203          INQUIRE( FILE=filename, EXIST=netcdf_extend )
1204
1205          IF ( netcdf_extend )  THEN
1206!
1207!--          Open an existing NetCDF file for output
1208             nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_sp )
1209             CALL handle_netcdf_error( 'check_open', 38 )
1210
1211!
1212!--          Read header information and set all ids. If there is a mismatch
1213!--          between the previuos and the actual run, netcdf_extend is returned
1214!--          as .FALSE.
1215             CALL define_netcdf_header( 'sp', netcdf_extend, 0 )
1216
1217!
1218!--          Remove the local file, if it can not be extended
1219             IF ( .NOT. netcdf_extend )  THEN
1220                nc_stat = NF90_CLOSE( id_set_sp )
1221                CALL handle_netcdf_error( 'check_open', 39 )
1222                CALL local_system( 'rm ' // TRIM( filename ) )
1223             ENDIF
1224
1225          ENDIF         
1226
1227          IF ( .NOT. netcdf_extend )  THEN
1228!
1229!--          Create a new NetCDF output file
1230             IF ( netcdf_data_format > 1 )  THEN
1231                nc_stat = NF90_CREATE( filename,                               &
1232                                       OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1233                                       id_set_sp )
1234             ELSE
1235                nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_sp )
1236             ENDIF
1237             CALL handle_netcdf_error( 'check_open', 40 )
1238!
1239!--          Define the header
1240             CALL define_netcdf_header( 'sp', netcdf_extend, 0 )
1241
1242          ENDIF
1243
1244
1245       CASE ( 108 )
1246
1247          IF ( myid_char == '' )  THEN
1248             filename = 'DATA_PRT_NETCDF' // coupling_char
1249          ELSE
1250             filename = 'DATA_PRT_NETCDF' // TRIM( coupling_char ) // '/' // &
1251                        myid_char
1252          ENDIF
1253!
1254!--       Inquire, if there is a NetCDF file from a previuos run. This should
1255!--       be opened for extension, if its variables match the actual run.
1256          INQUIRE( FILE=filename, EXIST=netcdf_extend )
1257
1258          IF ( netcdf_extend )  THEN
1259!
1260!--          Open an existing NetCDF file for output
1261             nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_prt )
1262             CALL handle_netcdf_error( 'check_open', 41 )
1263!
1264!--          Read header information and set all ids. If there is a mismatch
1265!--          between the previuos and the actual run, netcdf_extend is returned
1266!--          as .FALSE.
1267             CALL define_netcdf_header( 'pt', netcdf_extend, 0 )
1268
1269!
1270!--          Remove the local file, if it can not be extended
1271             IF ( .NOT. netcdf_extend )  THEN
1272                nc_stat = NF90_CLOSE( id_set_prt )
1273                CALL handle_netcdf_error( 'check_open', 42 )
1274                CALL local_system( 'rm ' // filename )
1275             ENDIF
1276
1277          ENDIF         
1278
1279          IF ( .NOT. netcdf_extend )  THEN
1280
1281!
1282!--          For runs on multiple processors create the subdirectory
1283             IF ( myid_char /= '' )  THEN
1284                IF ( myid == 0  .AND. .NOT. openfile(file_id)%opened_before ) &
1285                THEN    ! needs modification in case of non-extendable sets
1286                   CALL local_system( 'mkdir  DATA_PRT_NETCDF' // &
1287                                       TRIM( coupling_char ) // '/' )
1288                ENDIF
1289#if defined( __parallel )
1290!
1291!--             Set a barrier in order to allow that all other processors in the
1292!--             directory created by PE0 can open their file
1293                CALL MPI_BARRIER( comm2d, ierr )
1294#endif
1295             ENDIF
1296
1297!
1298!--          Create a new NetCDF output file with requested NetCDF format
1299             IF ( netcdf_data_format == 1 )  THEN
1300!
1301!--             Classic NetCDF format
1302                nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_prt )
1303
1304             ELSEIF ( netcdf_data_format == 2 )  THEN
1305!
1306!--             64bit-offset format
1307                nc_stat = NF90_CREATE( filename,                               &
1308                                       OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1309                                       id_set_prt )
1310
1311#if defined( __netcdf4 )
1312             ELSEIF ( netcdf_data_format == 3 )  THEN
1313!
1314!--             NetCDF4/HDF5 format, but no parallel output into a single file!
1315                nc_stat = NF90_CREATE( filename,                               &
1316                                       OR( NF90_NOCLOBBER, NF90_NETCDF4 ),     &
1317                                       id_set_prt )
1318
1319             ELSEIF ( netcdf_data_format == 4 )  THEN
1320!
1321!--             NetCDF4/HDF5 format with classic model flag, but no parallel
1322!--             output into a single file!
1323                nc_stat = NF90_CREATE( filename,                               &
1324                                       OR( NF90_NOCLOBBER,                     &
1325                                        OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
1326                                       id_set_prt )
1327#endif
1328             ENDIF
1329             
1330             CALL handle_netcdf_error( 'check_open', 43 ) 
1331
1332!
1333!--          Define the header
1334             CALL define_netcdf_header( 'pt', netcdf_extend, 0 )
1335
1336          ENDIF
1337
1338       CASE ( 109 )
1339!
1340!--       Set filename
1341          filename = 'DATA_1D_PTS_NETCDF' // coupling_char
1342
1343!
1344!--       Inquire, if there is a NetCDF file from a previuos run. This should
1345!--       be opened for extension, if its variables match the actual run.
1346          INQUIRE( FILE=filename, EXIST=netcdf_extend )
1347
1348          IF ( netcdf_extend )  THEN
1349!
1350!--          Open an existing NetCDF file for output
1351             nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_pts )
1352             CALL handle_netcdf_error( 'check_open', 393 )
1353!
1354!--          Read header information and set all ids. If there is a mismatch
1355!--          between the previuos and the actual run, netcdf_extend is returned
1356!--          as .FALSE.
1357             CALL define_netcdf_header( 'ps', netcdf_extend, 0 )
1358
1359!
1360!--          Remove the local file, if it can not be extended
1361             IF ( .NOT. netcdf_extend )  THEN
1362                nc_stat = NF90_CLOSE( id_set_pts )
1363                CALL handle_netcdf_error( 'check_open', 394 )
1364                CALL local_system( 'rm ' // TRIM( filename ) )
1365             ENDIF
1366
1367          ENDIF         
1368
1369          IF ( .NOT. netcdf_extend )  THEN
1370!
1371!--          Create a new NetCDF output file
1372             IF ( netcdf_data_format > 1 )  THEN
1373                nc_stat = NF90_CREATE( filename,                               &
1374                                       OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1375                                       id_set_pts )
1376             ELSE
1377                nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_pts )
1378             ENDIF
1379             CALL handle_netcdf_error( 'check_open', 395 )
1380!
1381!--          Define the header
1382             CALL define_netcdf_header( 'ps', netcdf_extend, 0 )
1383
1384          ENDIF
1385
1386       CASE ( 201:200+2*max_masks )
1387!
1388!--       Set filename depending on unit number
1389          IF ( file_id <= 200+max_masks )  THEN
1390             mid = file_id - 200
1391             WRITE ( mask_char,'(I2.2)')  mid
1392             filename = 'DATA_MASK_' // mask_char // '_NETCDF' // coupling_char
1393             av = 0
1394          ELSE
1395             mid = file_id - (200+max_masks)
1396             WRITE ( mask_char,'(I2.2)')  mid
1397             filename = 'DATA_MASK_' // mask_char // '_AV_NETCDF' // &
1398                  coupling_char
1399             av = 1
1400          ENDIF
1401!
1402!--       Inquire, if there is a NetCDF file from a previuos run. This should
1403!--       be opened for extension, if its dimensions and variables match the
1404!--       actual run.
1405          INQUIRE( FILE=filename, EXIST=netcdf_extend )
1406
1407          IF ( netcdf_extend )  THEN
1408!
1409!--          Open an existing NetCDF file for output
1410#if defined( __netcdf4 )
1411             nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_mask(mid,av), &
1412                                  COMM = comm2d, INFO = MPI_INFO_NULL )
1413#else
1414             nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_mask(mid,av) )
1415#endif
1416             CALL handle_netcdf_error( 'check_open', 456 )
1417!
1418!--          Read header information and set all ids. If there is a mismatch
1419!--          between the previuos and the actual run, netcdf_extend is returned
1420!--          as .FALSE.
1421             CALL define_netcdf_header( 'ma', netcdf_extend, file_id )
1422
1423!
1424!--          Remove the local file, if it can not be extended
1425             IF ( .NOT. netcdf_extend )  THEN
1426                nc_stat = NF90_CLOSE( id_set_mask(mid,av) )
1427                CALL handle_netcdf_error( 'check_open', 457 )
1428                CALL local_system('rm ' // TRIM( filename ) )
1429             ENDIF
1430
1431          ENDIF         
1432
1433          IF ( .NOT. netcdf_extend )  THEN
1434!
1435!--          Create a new NetCDF output file with requested NetCDF format
1436             IF ( netcdf_data_format == 1 )  THEN
1437!
1438!--             Classic NetCDF format
1439                nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, &
1440                                       id_set_mask(mid,av) )
1441
1442             ELSEIF ( netcdf_data_format == 2 )  THEN
1443!
1444!--             64bit-offset format
1445                nc_stat = NF90_CREATE( filename,                               &
1446                                       OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1447                                       id_set_mask(mid,av) )
1448
1449
1450#if defined( __netcdf4 )
1451             ELSEIF ( netcdf_data_format == 3 )  THEN
1452!
1453!--             NetCDF4/HDF5 format
1454                nc_stat = NF90_CREATE( filename,                               &
1455                                       OR( NF90_NOCLOBBER, NF90_NETCDF4 ),     &
1456                                       id_set_mask(mid,av), COMM = comm2d,     &
1457                                       INFO = MPI_INFO_NULL )
1458
1459             ELSEIF ( netcdf_data_format == 4 )  THEN
1460!
1461!--             NetCDF4/HDF5 format with classic model flag
1462                nc_stat = NF90_CREATE( filename,                               &
1463                                       OR( NF90_NOCLOBBER,                     &
1464                                        OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
1465                                       id_set_mask(mid,av), COMM = comm2d,     &
1466                                       INFO = MPI_INFO_NULL )
1467#endif
1468             ENDIF
1469
1470             CALL handle_netcdf_error( 'check_open', 458 )
1471!
1472!--          Define the header
1473             CALL define_netcdf_header( 'ma', netcdf_extend, file_id )
1474
1475          ENDIF
1476
1477
1478#else
1479
1480       CASE ( 101:109, 111:113, 116, 201:200+2*max_masks )
1481
1482!
1483!--       Nothing is done in case of missing netcdf support
1484          RETURN
1485
1486#endif
1487
1488       CASE DEFAULT
1489
1490          WRITE( message_string, * ) 'no OPEN-statement for file-id ',file_id
1491          CALL message( 'check_open', 'PA0172', 2, 2, -1, 6, 1 )
1492
1493    END SELECT
1494
1495!
1496!-- Set open flag
1497    openfile(file_id)%opened = .TRUE.
1498
1499!
1500!-- Formats
15013300 FORMAT ('#'/                                                   &
1502             'coord 1  file=',A,'  filetype=unformatted'/           &
1503             'coord 2  file=',A,'  filetype=unformatted  skip=',I6/ &
1504             'coord 3  file=',A,'  filetype=unformatted  skip=',I6/ &
1505             '#')
15064000 FORMAT ('# ',A)
15075000 FORMAT ('# ',A/                                                          &
1508             '#1 E'/'#2 E*'/'#3 dt'/'#4 u*'/'#5 th*'/'#6 umax'/'#7 vmax'/     &
1509             '#8 wmax'/'#9 div_new'/'#10 div_old'/'#11 z_i_wpt'/'#12 z_i_pt'/ &
1510             '#13 w*'/'#14 w''pt''0'/'#15 w''pt'''/'#16 wpt'/'#17 pt(0)'/     &
1511             '#18 pt(zp)'/'#19 splptx'/'#20 splpty'/'#21 splptz')
15128000 FORMAT (A/                                                            &
1513             '  step    time  # of parts   lPE sent/recv  rPE sent/recv  ',&
1514             'sPE sent/recv  nPE sent/recv  max # of parts'/               &
1515             103('-'))
1516
1517 END SUBROUTINE check_open
Note: See TracBrowser for help on using the repository browser.