!> @file check_open.f90 !------------------------------------------------------------------------------! ! This file is part of the PALM model system. ! ! PALM is free software: you can redistribute it and/or modify it under the ! terms of the GNU General Public License as published by the Free Software ! Foundation, either version 3 of the License, or (at your option) any later ! version. ! ! PALM is distributed in the hope that it will be useful, but WITHOUT ANY ! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR ! A PARTICULAR PURPOSE. See the GNU General Public License for more details. ! ! You should have received a copy of the GNU General Public License along with ! PALM. If not, see . ! ! Copyright 1997-2019 Leibniz Universitaet Hannover !------------------------------------------------------------------------------! ! ! Current revisions: ! ----------------- ! ! ! Former revisions: ! ----------------- ! $Id: check_open.f90 4182 2019-08-22 15:20:23Z gronemeier $ ! Corrected "Former revisions" section ! ! 4128 2019-07-30 16:28:58Z gronemeier ! Bugfix for opening the parameter file (unit 11): return error message if file ! was not found. ! ! 4099 2019-07-15 15:29:37Z suehring ! Bugfix in opening the parameter file (unit 11) in case of ocean precursor ! runs. ! ! 4069 2019-07-01 14:05:51Z Giersch ! Masked output running index mid has been introduced as a local variable to ! avoid runtime error (Loop variable has been modified) in time_integration ! ! 3967 2019-05-09 16:04:34Z gronemeier ! Save binary data of virtual measurements within separate folder ! ! 3812 2019-03-25 07:10:12Z gronemeier ! Open binary surface output data within separate folder ! ! 3705 2019-01-29 19:56:39Z suehring ! Open binary files for virtual measurements ! ! 3704 2019-01-29 19:51:41Z suehring ! Open files for surface data ! ! Revision 1.1 1997/08/11 06:10:55 raasch ! Initial revision ! ! ! Description: ! ------------ !> Check if file unit is open. If not, open file and, if necessary, write a !> header or start other initializing actions, respectively. !------------------------------------------------------------------------------! SUBROUTINE check_open( file_id ) USE control_parameters, & ONLY: coupling_char, data_output_2d_on_each_pe, & max_masks, message_string, nz_do3d, openfile, & run_description_header USE indices, & ONLY: nbgp, nx, nxl, nxr, ny, nyn, nys, nz, nzb, nzt USE kinds #if defined( __netcdf ) USE NETCDF #endif USE netcdf_interface, & ONLY: id_set_agt, id_set_fl, id_set_mask, id_set_pr, & id_set_pts, id_set_sp, id_set_ts, id_set_xy, id_set_xz, & id_set_yz, id_set_3d, nc_stat, netcdf_create_file, & netcdf_data_format, netcdf_define_header, netcdf_handle_error, & netcdf_open_write_file USE particle_attributes, & ONLY: max_number_of_particle_groups, number_of_particle_groups, & particle_groups USE pegrid USE posix_calls_from_fortran, & ONLY: fortran_sleep IMPLICIT NONE CHARACTER (LEN=4) :: mask_char !< CHARACTER (LEN=30) :: filename !< CHARACTER (LEN=80) :: rtext !< INTEGER(iwp) :: av !< INTEGER(iwp) :: file_id !< INTEGER(iwp) :: ioerr !< IOSTAT flag for IO-commands ( 0 = no error ) INTEGER(iwp) :: mid !< masked output running index LOGICAL :: file_exist !< file check LOGICAL :: netcdf_extend !< ! !-- Immediate return if file already open IF ( openfile(file_id)%opened ) RETURN ! !-- Only certain files are allowed to be re-opened !-- NOTE: some of the other files perhaps also could be re-opened, but it !-- has not been checked so far, if it works! IF ( openfile(file_id)%opened_before ) THEN SELECT CASE ( file_id ) CASE ( 13, 14, 21, 22, 23, 80, 85, 117 ) IF ( file_id == 14 .AND. openfile(file_id)%opened_before ) THEN message_string = 're-open of unit ' // & '14 is not verified. Please check results!' CALL message( 'check_open', 'PA0165', 0, 1, 0, 6, 0 ) ENDIF CASE DEFAULT WRITE( message_string, * ) 're-opening of file-id ', file_id, & ' is not allowed' CALL message( 'check_open', 'PA0166', 0, 1, 0, 6, 0 ) RETURN END SELECT ENDIF ! !-- Check if file may be opened on the relevant PE SELECT CASE ( file_id ) CASE ( 15, 16, 17, 18, 19, 50:59, 104:105, 107, 109, 117 ) IF ( myid /= 0 ) THEN WRITE( message_string, * ) 'opening file-id ',file_id, & ' not allowed for PE ',myid CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 ) ENDIF CASE ( 101:103, 106, 111:113, 116, 201:200+2*max_masks ) IF ( netcdf_data_format < 5 ) THEN IF ( myid /= 0 ) THEN WRITE( message_string, * ) 'opening file-id ',file_id, & ' not allowed for PE ',myid CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 ) ENDIF ENDIF CASE ( 21, 22, 23 ) IF ( .NOT. data_output_2d_on_each_pe ) THEN IF ( myid /= 0 ) THEN WRITE( message_string, * ) 'opening file-id ',file_id, & ' not allowed for PE ',myid CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 ) END IF ENDIF CASE ( 90:99 ) ! !-- File-ids that are used temporarily in other routines WRITE( message_string, * ) 'opening file-id ',file_id, & ' is not allowed since it is used otherwise' CALL message( 'check_open', 'PA0168', 0, 1, 0, 6, 0 ) END SELECT ! !-- Open relevant files SELECT CASE ( file_id ) CASE ( 11 ) ! !-- Read the parameter file. Therefore, inquire whether the file exist or !-- not. This is required for the ocean-atmoshere coupling. For an ocean !-- precursor run palmrun provides a PARIN_O file instead of a PARIN !-- file. Actually this should be considered in coupling_char, however, !-- in pmc_init the parameter file is already opened to read the !-- nesting parameters and decide whether it is a nested run or not, !-- but coupling_char is still not set at that moment (must be set after !- the nesting setup is read). !-- This, however, leads to the situation that for ocean !-- precursor runs PARIN is not available and the run crashes. Thus, !-- if the file is not there, PARIN_O will be read. An ocean precursor !-- run will be the only situation where this can happen. INQUIRE( FILE = 'PARIN' // TRIM( coupling_char ), & EXIST = file_exist ) IF ( file_exist ) THEN filename = 'PARIN' // TRIM( coupling_char ) ELSE filename = 'PARIN_O' ENDIF OPEN ( 11, FILE= TRIM( filename ), FORM='FORMATTED', STATUS='OLD', IOSTAT=ioerr ) IF ( ioerr /= 0 ) THEN message_string = 'namelist file "PARIN' // TRIM( coupling_char ) // & '" or "PARIN_O" not found!' // & '&Please have a look at the online description of the ' // & 'error message for further hints.' CALL message( 'check_open', 'PA0661', 3, 2, 0, 6, 1 ) ENDIF CASE ( 13 ) IF ( myid_char == '' ) THEN OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//myid_char, & FORM='UNFORMATTED', STATUS='OLD' ) ELSE ! !-- First opening of unit 13 openes file _000000 on all PEs because !-- only this file contains the global variables IF ( .NOT. openfile(file_id)%opened_before ) THEN OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/_000000', & FORM='UNFORMATTED', STATUS='OLD' ) ELSE OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/'// & myid_char, FORM='UNFORMATTED', STATUS='OLD' ) ENDIF ENDIF CASE ( 14 ) IF ( myid_char == '' ) THEN OPEN ( 14, FILE='BINOUT'//TRIM( coupling_char )//myid_char, & FORM='UNFORMATTED', POSITION='APPEND' ) ELSE IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN CALL local_system( 'mkdir BINOUT' // TRIM( coupling_char ) ) ENDIF #if defined( __parallel ) ! !-- Set a barrier in order to allow that all other processors in the !-- directory created by PE0 can open their file CALL MPI_BARRIER( comm2d, ierr ) #endif ioerr = 1 DO WHILE ( ioerr /= 0 ) OPEN ( 14, FILE='BINOUT'//TRIM(coupling_char)//'/'//myid_char, & FORM='UNFORMATTED', IOSTAT=ioerr ) IF ( ioerr /= 0 ) THEN WRITE( 9, * ) '*** could not open "BINOUT'// & TRIM(coupling_char)//'/'//myid_char// & '"! Trying again in 1 sec.' CALL fortran_sleep( 1 ) ENDIF ENDDO ENDIF CASE ( 15 ) OPEN ( 15, FILE='RUN_CONTROL'//TRIM( coupling_char ), & FORM='FORMATTED' ) CASE ( 16 ) OPEN ( 16, FILE='LIST_PROFIL'//TRIM( coupling_char ), & FORM='FORMATTED' ) CASE ( 17 ) OPEN ( 17, FILE='LIST_PROFIL_1D'//TRIM( coupling_char ), & FORM='FORMATTED' ) CASE ( 18 ) OPEN ( 18, FILE='CPU_MEASURES'//TRIM( coupling_char ), & FORM='FORMATTED' ) CASE ( 19 ) OPEN ( 19, FILE='HEADER'//TRIM( coupling_char ), FORM='FORMATTED' ) CASE ( 20 ) IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN CALL local_system( 'mkdir DATA_LOG' // TRIM( coupling_char ) ) ENDIF IF ( myid_char == '' ) THEN OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/_000000', & FORM='UNFORMATTED', POSITION='APPEND' ) ELSE #if defined( __parallel ) ! !-- Set a barrier in order to allow that all other processors in the !-- directory created by PE0 can open their file CALL MPI_BARRIER( comm2d, ierr ) #endif ioerr = 1 DO WHILE ( ioerr /= 0 ) OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/'// & myid_char, FORM='UNFORMATTED', POSITION='APPEND', & IOSTAT=ioerr ) IF ( ioerr /= 0 ) THEN WRITE( 9, * ) '*** could not open "DATA_LOG'// & TRIM( coupling_char )//'/'//myid_char// & '"! Trying again in 1 sec.' CALL fortran_sleep( 1 ) ENDIF ENDDO ENDIF CASE ( 21 ) IF ( data_output_2d_on_each_pe ) THEN OPEN ( 21, FILE='PLOT2D_XY'//TRIM( coupling_char )//myid_char, & FORM='UNFORMATTED', POSITION='APPEND' ) ELSE OPEN ( 21, FILE='PLOT2D_XY'//TRIM( coupling_char ), & FORM='UNFORMATTED', POSITION='APPEND' ) ENDIF IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN ! !-- Write index bounds of total domain for combine_plot_fields IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN WRITE (21) 0, nx, 0, ny ENDIF ENDIF CASE ( 22 ) IF ( data_output_2d_on_each_pe ) THEN OPEN ( 22, FILE='PLOT2D_XZ'//TRIM( coupling_char )//myid_char, & FORM='UNFORMATTED', POSITION='APPEND' ) ELSE OPEN ( 22, FILE='PLOT2D_XZ'//TRIM( coupling_char ), & FORM='UNFORMATTED', POSITION='APPEND' ) ENDIF IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN ! !-- Write index bounds of total domain for combine_plot_fields IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN WRITE (22) 0, nx, 0, nz+1 ! output part ENDIF ENDIF CASE ( 23 ) IF ( data_output_2d_on_each_pe ) THEN OPEN ( 23, FILE='PLOT2D_YZ'//TRIM( coupling_char )//myid_char, & FORM='UNFORMATTED', POSITION='APPEND' ) ELSE OPEN ( 23, FILE='PLOT2D_YZ'//TRIM( coupling_char ), & FORM='UNFORMATTED', POSITION='APPEND' ) ENDIF IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN ! !-- Write index bounds of total domain for combine_plot_fields IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN WRITE (23) 0, ny, 0, nz+1 ! output part ENDIF ENDIF CASE ( 25 ) ! !-- Binary files for surface data ! OPEN ( 25, FILE='SURFACE_DATA_BIN'//TRIM( coupling_char )// & ! myid_char, FORM='UNFORMATTED', POSITION='APPEND' ) IF ( myid_char == '' ) THEN OPEN ( 25, FILE='SURFACE_DATA_BIN'//TRIM( coupling_char )// & myid_char, FORM='UNFORMATTED', POSITION='APPEND' ) ELSE IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN CALL local_system( 'mkdir SURFACE_DATA_BIN' // & TRIM( coupling_char ) ) ENDIF #if defined( __parallel ) ! !-- Set a barrier in order to allow that all other processors in the !-- directory created by PE0 can open their file CALL MPI_BARRIER( comm2d, ierr ) #endif ioerr = 1 DO WHILE ( ioerr /= 0 ) OPEN ( 25, FILE='SURFACE_DATA_BIN'//TRIM(coupling_char)// & '/'//myid_char, & FORM='UNFORMATTED', IOSTAT=ioerr ) IF ( ioerr /= 0 ) THEN WRITE( 9, * ) '*** could not open "SURFACE_DATA_BIN'// & TRIM(coupling_char)//'/'//myid_char// & '"! Trying again in 1 sec.' CALL fortran_sleep( 1 ) ENDIF ENDDO ENDIF CASE ( 26 ) ! !-- Binary files for averaged surface data ! OPEN ( 26, FILE='SURFACE_DATA_AV_BIN'//TRIM( coupling_char )//myid_char, & ! FORM='UNFORMATTED', POSITION='APPEND' ) IF ( myid_char == '' ) THEN OPEN ( 26, FILE='SURFACE_DATA_AV_BIN'//TRIM( coupling_char )// & myid_char, FORM='UNFORMATTED', POSITION='APPEND' ) ELSE IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN CALL local_system( 'mkdir SURFACE_DATA_AV_BIN' // & TRIM( coupling_char ) ) ENDIF #if defined( __parallel ) ! !-- Set a barrier in order to allow that all other processors in the !-- directory created by PE0 can open their file CALL MPI_BARRIER( comm2d, ierr ) #endif ioerr = 1 DO WHILE ( ioerr /= 0 ) OPEN ( 26, FILE='SURFACE_DATA_AV_BIN'//TRIM(coupling_char)// & '/'//myid_char, & FORM='UNFORMATTED', IOSTAT=ioerr ) IF ( ioerr /= 0 ) THEN WRITE( 9, * ) '*** could not open "SURFACE_DATA_AV_BIN'// & TRIM(coupling_char)//'/'//myid_char// & '"! Trying again in 1 sec.' CALL fortran_sleep( 1 ) ENDIF ENDDO ENDIF CASE ( 27 ) ! !-- Binary files for virtual measurement data IF ( myid_char == '' ) THEN OPEN ( 27, FILE='VIRTUAL_MEAS_BIN'//TRIM( coupling_char )// & myid_char, FORM='UNFORMATTED', POSITION='APPEND' ) ELSE IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN CALL local_system( 'mkdir VIRTUAL_MEAS_BIN' // & TRIM( coupling_char ) ) ENDIF #if defined( __parallel ) ! !-- Set a barrier in order to allow that all other processors in the !-- directory created by PE0 can open their file CALL MPI_BARRIER( comm2d, ierr ) #endif ioerr = 1 DO WHILE ( ioerr /= 0 ) OPEN ( 27, FILE='VIRTUAL_MEAS_BIN'//TRIM(coupling_char)// & '/'//myid_char, & FORM='UNFORMATTED', IOSTAT=ioerr ) IF ( ioerr /= 0 ) THEN WRITE( 9, * ) '*** could not open "VIRTUAL_MEAS_BIN'// & TRIM(coupling_char)//'/'//myid_char// & '"! Trying again in 1 sec.' CALL fortran_sleep( 1 ) ENDIF ENDDO ENDIF CASE ( 30 ) OPEN ( 30, FILE='PLOT3D_DATA'//TRIM( coupling_char )//myid_char, & FORM='UNFORMATTED' ) ! !-- Specifications for combine_plot_fields IF ( myid == 0 ) THEN #if defined( __parallel ) WRITE ( 30 ) 0, nx, 0, ny, 0, nz_do3d #endif ENDIF CASE ( 80 ) IF ( myid_char == '' ) THEN OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM(coupling_char)//myid_char, & FORM='FORMATTED', POSITION='APPEND' ) ELSE IF ( myid == 0 .AND. .NOT. openfile(80)%opened_before ) THEN CALL local_system( 'mkdir PARTICLE_INFOS' // & TRIM( coupling_char ) ) ENDIF #if defined( __parallel ) ! !-- Set a barrier in order to allow that thereafter all other !-- processors in the directory created by PE0 can open their file. !-- WARNING: The following barrier will lead to hanging jobs, if !-- check_open is first called from routine !-- allocate_prt_memory! IF ( .NOT. openfile(80)%opened_before ) THEN CALL MPI_BARRIER( comm2d, ierr ) ENDIF #endif OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM( coupling_char )//'/'// & myid_char, & FORM='FORMATTED', POSITION='APPEND' ) ENDIF IF ( .NOT. openfile(80)%opened_before ) THEN WRITE ( 80, 8000 ) TRIM( run_description_header ) ENDIF CASE ( 85 ) IF ( myid_char == '' ) THEN OPEN ( 85, FILE='PARTICLE_DATA'//TRIM(coupling_char)//myid_char, & FORM='UNFORMATTED', POSITION='APPEND' ) ELSE IF ( myid == 0 .AND. .NOT. openfile(85)%opened_before ) THEN CALL local_system( 'mkdir PARTICLE_DATA' // & TRIM( coupling_char ) ) ENDIF #if defined( __parallel ) ! !-- Set a barrier in order to allow that thereafter all other !-- processors in the directory created by PE0 can open their file CALL MPI_BARRIER( comm2d, ierr ) #endif ioerr = 1 DO WHILE ( ioerr /= 0 ) OPEN ( 85, FILE='PARTICLE_DATA'//TRIM( coupling_char )//'/'// & myid_char, & FORM='UNFORMATTED', POSITION='APPEND', IOSTAT=ioerr ) IF ( ioerr /= 0 ) THEN WRITE( 9, * ) '*** could not open "PARTICLE_DATA'// & TRIM( coupling_char )//'/'//myid_char// & '"! Trying again in 1 sec.' CALL fortran_sleep( 1 ) ENDIF ENDDO ENDIF IF ( .NOT. openfile(85)%opened_before ) THEN WRITE ( 85 ) run_description_header ! !-- Attention: change version number whenever the output format on !-- unit 85 is changed (see also in routine !-- lpm_data_output_particles) rtext = 'data format version 3.1' WRITE ( 85 ) rtext WRITE ( 85 ) number_of_particle_groups, & max_number_of_particle_groups WRITE ( 85 ) particle_groups WRITE ( 85 ) nxl, nxr, nys, nyn, nzb, nzt, nbgp ENDIF ! !-- File where sky-view factors and further required data is stored will be !-- read CASE ( 88 ) IF ( myid_char == '' ) THEN OPEN ( 88, FILE='SVFIN'//TRIM( coupling_char )//myid_char, & FORM='UNFORMATTED', STATUS='OLD', IOSTAT=ioerr ) ELSE OPEN ( 88, FILE='SVFIN'//TRIM( coupling_char )//'/'//myid_char, & FORM='UNFORMATTED', STATUS='OLD', IOSTAT=ioerr ) ENDIF ! !-- File where sky-view factors and further required data is stored will be !-- created CASE ( 89 ) IF ( myid_char == '' ) THEN OPEN ( 89, FILE='SVFOUT'//TRIM( coupling_char )//myid_char, & FORM='UNFORMATTED', STATUS='NEW' ) ELSE IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN CALL local_system( 'mkdir SVFOUT' // TRIM( coupling_char ) ) ENDIF #if defined( __parallel ) ! !-- Set a barrier in order to allow that all other processors in the !-- directory created by PE0 can open their file CALL MPI_BARRIER( comm2d, ierr ) #endif ioerr = 1 DO WHILE ( ioerr /= 0 ) OPEN ( 89, FILE='SVFOUT'//TRIM(coupling_char)//'/'//myid_char, & FORM='UNFORMATTED', STATUS='NEW', IOSTAT=ioerr ) IF ( ioerr /= 0 ) THEN WRITE( 9, * ) '*** could not open "SVFOUT'// & TRIM(coupling_char)//'/'//myid_char// & '"! Trying again in 1 sec.' CALL fortran_sleep( 1 ) ENDIF ENDDO ENDIF ! !-- Progress file that is used by the PALM watchdog CASE ( 117 ) OPEN ( 117, FILE='PROGRESS'//TRIM( coupling_char ), & STATUS='REPLACE', FORM='FORMATTED' ) #if defined( __netcdf ) CASE ( 101, 111 ) ! !-- Set filename depending on unit number IF ( file_id == 101 ) THEN filename = 'DATA_2D_XY_NETCDF' // TRIM( coupling_char ) av = 0 ELSE filename = 'DATA_2D_XY_AV_NETCDF' // TRIM( coupling_char ) av = 1 ENDIF ! !-- Inquire, if there is a netCDF file from a previuos run. This should !-- be opened for extension, if its dimensions and variables match the !-- actual run. INQUIRE( FILE=filename, EXIST=netcdf_extend ) IF ( netcdf_extend ) THEN ! !-- Open an existing netCDF file for output CALL netcdf_open_write_file( filename, id_set_xy(av), .TRUE., 20 ) ! !-- Read header information and set all ids. If there is a mismatch !-- between the previuos and the actual run, netcdf_extend is returned !-- as .FALSE. CALL netcdf_define_header( 'xy', netcdf_extend, av ) ! !-- Remove the local file, if it can not be extended IF ( .NOT. netcdf_extend ) THEN nc_stat = NF90_CLOSE( id_set_xy(av) ) CALL netcdf_handle_error( 'check_open', 21 ) IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) ) #if defined( __parallel ) ! !-- Set a barrier in order to assure that PE0 deleted the old file !-- before any other processor tries to open a new file. !-- Barrier is only needed in case of parallel I/O IF ( netcdf_data_format > 4 ) CALL MPI_BARRIER( comm2d, ierr ) #endif ENDIF ENDIF IF ( .NOT. netcdf_extend ) THEN ! !-- Create a new netCDF output file with requested netCDF format CALL netcdf_create_file( filename, id_set_xy(av), .TRUE., 22 ) ! !-- Define the header CALL netcdf_define_header( 'xy', netcdf_extend, av ) ! !-- In case of parallel netCDF output, create flag file which tells !-- combine_plot_fields that nothing is to do. IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_XY' ) WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary' CLOSE( 99 ) ENDIF ENDIF CASE ( 102, 112 ) ! !-- Set filename depending on unit number IF ( file_id == 102 ) THEN filename = 'DATA_2D_XZ_NETCDF' // TRIM( coupling_char ) av = 0 ELSE filename = 'DATA_2D_XZ_AV_NETCDF' // TRIM( coupling_char ) av = 1 ENDIF ! !-- Inquire, if there is a netCDF file from a previuos run. This should !-- be opened for extension, if its dimensions and variables match the !-- actual run. INQUIRE( FILE=filename, EXIST=netcdf_extend ) IF ( netcdf_extend ) THEN ! !-- Open an existing netCDF file for output CALL netcdf_open_write_file( filename, id_set_xz(av), .TRUE., 23 ) ! !-- Read header information and set all ids. If there is a mismatch !-- between the previuos and the actual run, netcdf_extend is returned !-- as .FALSE. CALL netcdf_define_header( 'xz', netcdf_extend, av ) ! !-- Remove the local file, if it can not be extended IF ( .NOT. netcdf_extend ) THEN nc_stat = NF90_CLOSE( id_set_xz(av) ) CALL netcdf_handle_error( 'check_open', 24 ) IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) ) #if defined( __parallel ) ! !-- Set a barrier in order to assure that PE0 deleted the old file !-- before any other processor tries to open a new file !-- Barrier is only needed in case of parallel I/O IF ( netcdf_data_format > 4 ) CALL MPI_BARRIER( comm2d, ierr ) #endif ENDIF ENDIF IF ( .NOT. netcdf_extend ) THEN ! !-- Create a new netCDF output file with requested netCDF format CALL netcdf_create_file( filename, id_set_xz(av), .TRUE., 25 ) ! !-- Define the header CALL netcdf_define_header( 'xz', netcdf_extend, av ) ! !-- In case of parallel netCDF output, create flag file which tells !-- combine_plot_fields that nothing is to do. IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_XZ' ) WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary' CLOSE( 99 ) ENDIF ENDIF CASE ( 103, 113 ) ! !-- Set filename depending on unit number IF ( file_id == 103 ) THEN filename = 'DATA_2D_YZ_NETCDF' // TRIM( coupling_char ) av = 0 ELSE filename = 'DATA_2D_YZ_AV_NETCDF' // TRIM( coupling_char ) av = 1 ENDIF ! !-- Inquire, if there is a netCDF file from a previuos run. This should !-- be opened for extension, if its dimensions and variables match the !-- actual run. INQUIRE( FILE=filename, EXIST=netcdf_extend ) IF ( netcdf_extend ) THEN ! !-- Open an existing netCDF file for output CALL netcdf_open_write_file( filename, id_set_yz(av), .TRUE., 26 ) ! !-- Read header information and set all ids. If there is a mismatch !-- between the previuos and the actual run, netcdf_extend is returned !-- as .FALSE. CALL netcdf_define_header( 'yz', netcdf_extend, av ) ! !-- Remove the local file, if it can not be extended IF ( .NOT. netcdf_extend ) THEN nc_stat = NF90_CLOSE( id_set_yz(av) ) CALL netcdf_handle_error( 'check_open', 27 ) IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) ) #if defined( __parallel ) ! !-- Set a barrier in order to assure that PE0 deleted the old file !-- before any other processor tries to open a new file !-- Barrier is only needed in case of parallel I/O IF ( netcdf_data_format > 4 ) CALL MPI_BARRIER( comm2d, ierr ) #endif ENDIF ENDIF IF ( .NOT. netcdf_extend ) THEN ! !-- Create a new netCDF output file with requested netCDF format CALL netcdf_create_file( filename, id_set_yz(av), .TRUE., 28 ) ! !-- Define the header CALL netcdf_define_header( 'yz', netcdf_extend, av ) ! !-- In case of parallel netCDF output, create flag file which tells !-- combine_plot_fields that nothing is to do. IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_YZ' ) WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary' CLOSE( 99 ) ENDIF ENDIF CASE ( 104 ) ! !-- Set filename filename = 'DATA_1D_PR_NETCDF' // TRIM( coupling_char ) ! !-- Inquire, if there is a netCDF file from a previuos run. This should !-- be opened for extension, if its variables match the actual run. INQUIRE( FILE=filename, EXIST=netcdf_extend ) IF ( netcdf_extend ) THEN ! !-- Open an existing netCDF file for output CALL netcdf_open_write_file( filename, id_set_pr, .FALSE., 29 ) ! !-- Read header information and set all ids. If there is a mismatch !-- between the previuos and the actual run, netcdf_extend is returned !-- as .FALSE. CALL netcdf_define_header( 'pr', netcdf_extend, 0 ) ! !-- Remove the local file, if it can not be extended IF ( .NOT. netcdf_extend ) THEN nc_stat = NF90_CLOSE( id_set_pr ) CALL netcdf_handle_error( 'check_open', 30 ) CALL local_system( 'rm ' // TRIM( filename ) ) ENDIF ENDIF IF ( .NOT. netcdf_extend ) THEN ! !-- Create a new netCDF output file with requested netCDF format CALL netcdf_create_file( filename, id_set_pr, .FALSE., 31 ) ! !-- Define the header CALL netcdf_define_header( 'pr', netcdf_extend, 0 ) ENDIF CASE ( 105 ) ! !-- Set filename filename = 'DATA_1D_TS_NETCDF' // TRIM( coupling_char ) ! !-- Inquire, if there is a netCDF file from a previuos run. This should !-- be opened for extension, if its variables match the actual run. INQUIRE( FILE=filename, EXIST=netcdf_extend ) IF ( netcdf_extend ) THEN ! !-- Open an existing netCDF file for output CALL netcdf_open_write_file( filename, id_set_ts, .FALSE., 32 ) ! !-- Read header information and set all ids. If there is a mismatch !-- between the previuos and the actual run, netcdf_extend is returned !-- as .FALSE. CALL netcdf_define_header( 'ts', netcdf_extend, 0 ) ! !-- Remove the local file, if it can not be extended IF ( .NOT. netcdf_extend ) THEN nc_stat = NF90_CLOSE( id_set_ts ) CALL netcdf_handle_error( 'check_open', 33 ) CALL local_system( 'rm ' // TRIM( filename ) ) ENDIF ENDIF IF ( .NOT. netcdf_extend ) THEN ! !-- Create a new netCDF output file with requested netCDF format CALL netcdf_create_file( filename, id_set_ts, .FALSE., 34 ) ! !-- Define the header CALL netcdf_define_header( 'ts', netcdf_extend, 0 ) ENDIF CASE ( 106, 116 ) ! !-- Set filename depending on unit number IF ( file_id == 106 ) THEN filename = 'DATA_3D_NETCDF' // TRIM( coupling_char ) av = 0 ELSE filename = 'DATA_3D_AV_NETCDF' // TRIM( coupling_char ) av = 1 ENDIF ! !-- Inquire, if there is a netCDF file from a previous run. This should !-- be opened for extension, if its dimensions and variables match the !-- actual run. INQUIRE( FILE=filename, EXIST=netcdf_extend ) IF ( netcdf_extend ) THEN ! !-- Open an existing netCDF file for output CALL netcdf_open_write_file( filename, id_set_3d(av), .TRUE., 35 ) ! !-- Read header information and set all ids. If there is a mismatch !-- between the previuos and the actual run, netcdf_extend is returned !-- as .FALSE. CALL netcdf_define_header( '3d', netcdf_extend, av ) ! !-- Remove the local file, if it can not be extended IF ( .NOT. netcdf_extend ) THEN nc_stat = NF90_CLOSE( id_set_3d(av) ) CALL netcdf_handle_error( 'check_open', 36 ) IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) ) #if defined( __parallel ) ! !-- Set a barrier in order to assure that PE0 deleted the old file !-- before any other processor tries to open a new file !-- Barrier is only needed in case of parallel I/O IF ( netcdf_data_format > 4 ) CALL MPI_BARRIER( comm2d, ierr ) #endif ENDIF ENDIF IF ( .NOT. netcdf_extend ) THEN ! !-- Create a new netCDF output file with requested netCDF format CALL netcdf_create_file( filename, id_set_3d(av), .TRUE., 37 ) ! !-- Define the header CALL netcdf_define_header( '3d', netcdf_extend, av ) ! !-- In case of parallel netCDF output, create flag file which tells !-- combine_plot_fields that nothing is to do. IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_3D' ) WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary' CLOSE( 99 ) ENDIF ENDIF CASE ( 107 ) ! !-- Set filename filename = 'DATA_1D_SP_NETCDF' // TRIM( coupling_char ) ! !-- Inquire, if there is a netCDF file from a previuos run. This should !-- be opened for extension, if its variables match the actual run. INQUIRE( FILE=filename, EXIST=netcdf_extend ) IF ( netcdf_extend ) THEN ! !-- Open an existing netCDF file for output CALL netcdf_open_write_file( filename, id_set_sp, .FALSE., 38 ) ! !-- Read header information and set all ids. If there is a mismatch !-- between the previuos and the actual run, netcdf_extend is returned !-- as .FALSE. CALL netcdf_define_header( 'sp', netcdf_extend, 0 ) ! !-- Remove the local file, if it can not be extended IF ( .NOT. netcdf_extend ) THEN nc_stat = NF90_CLOSE( id_set_sp ) CALL netcdf_handle_error( 'check_open', 39 ) CALL local_system( 'rm ' // TRIM( filename ) ) ENDIF ENDIF IF ( .NOT. netcdf_extend ) THEN ! !-- Create a new netCDF output file with requested netCDF format CALL netcdf_create_file( filename, id_set_sp, .FALSE., 40 ) ! !-- Define the header CALL netcdf_define_header( 'sp', netcdf_extend, 0 ) ENDIF ! !-- Currently disabled ! CASE ( 108 ) ! IF ( myid_char == '' ) THEN ! filename = 'DATA_PRT_NETCDF' // TRIM( coupling_char ) ! ELSE ! filename = 'DATA_PRT_NETCDF' // TRIM( coupling_char ) // '/' // & ! myid_char ! ENDIF ! !-- Inquire, if there is a netCDF file from a previuos run. This should !-- be opened for extension, if its variables match the actual run. ! INQUIRE( FILE=filename, EXIST=netcdf_extend ) ! IF ( netcdf_extend ) THEN ! !-- Open an existing netCDF file for output ! CALL netcdf_open_write_file( filename, id_set_prt, .FALSE., 41 ) ! !-- Read header information and set all ids. If there is a mismatch !-- between the previuos and the actual run, netcdf_extend is returned !-- as .FALSE. ! CALL netcdf_define_header( 'pt', netcdf_extend, 0 ) ! !-- Remove the local file, if it can not be extended ! IF ( .NOT. netcdf_extend ) THEN ! nc_stat = NF90_CLOSE( id_set_prt ) ! CALL netcdf_handle_error( 'check_open', 42 ) ! CALL local_system( 'rm ' // TRIM( filename ) ) ! ENDIF ! ENDIF ! IF ( .NOT. netcdf_extend ) THEN ! !-- For runs on multiple processors create the subdirectory ! IF ( myid_char /= '' ) THEN ! IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) & ! THEN ! needs modification in case of non-extendable sets ! CALL local_system( 'mkdir DATA_PRT_NETCDF' // & ! TRIM( coupling_char ) // '/' ) ! ENDIF #if defined( __parallel ) ! !-- Set a barrier in order to allow that all other processors in the !-- directory created by PE0 can open their file ! CALL MPI_BARRIER( comm2d, ierr ) #endif ! ENDIF ! !-- Create a new netCDF output file with requested netCDF format ! CALL netcdf_create_file( filename, id_set_prt, .FALSE., 43 ) ! !-- Define the header ! CALL netcdf_define_header( 'pt', netcdf_extend, 0 ) ! ENDIF CASE ( 109 ) ! !-- Set filename filename = 'DATA_1D_PTS_NETCDF' // TRIM( coupling_char ) ! !-- Inquire, if there is a netCDF file from a previuos run. This should !-- be opened for extension, if its variables match the actual run. INQUIRE( FILE=filename, EXIST=netcdf_extend ) IF ( netcdf_extend ) THEN ! !-- Open an existing netCDF file for output CALL netcdf_open_write_file( filename, id_set_pts, .FALSE., 393 ) ! !-- Read header information and set all ids. If there is a mismatch !-- between the previuos and the actual run, netcdf_extend is returned !-- as .FALSE. CALL netcdf_define_header( 'ps', netcdf_extend, 0 ) ! !-- Remove the local file, if it can not be extended IF ( .NOT. netcdf_extend ) THEN nc_stat = NF90_CLOSE( id_set_pts ) CALL netcdf_handle_error( 'check_open', 394 ) CALL local_system( 'rm ' // TRIM( filename ) ) ENDIF ENDIF IF ( .NOT. netcdf_extend ) THEN ! !-- Create a new netCDF output file with requested netCDF format CALL netcdf_create_file( filename, id_set_pts, .FALSE., 395 ) ! !-- Define the header CALL netcdf_define_header( 'ps', netcdf_extend, 0 ) ENDIF CASE ( 118 ) IF ( myid == 0 ) THEN filename = 'DATA_AGT_NETCDF' ! !-- Inquire, if there is a netCDF file from a previuos run. This should !-- be opened for extension, if its variables match the actual run. INQUIRE( FILE=filename, EXIST=netcdf_extend ) ! !-- Create a new netCDF output file with requested netCDF format CALL netcdf_create_file( filename, id_set_agt, .FALSE., 43 ) ! !-- Define the header CALL netcdf_define_header( 'ag', netcdf_extend, 0 ) ENDIF ! IF ( netcdf_extend ) THEN ! ! ! !-- Open an existing netCDF file for output ! CALL netcdf_open_write_file( filename, id_set_agt, .FALSE., 41 ) ! ! ! !-- Read header information and set all ids. If there is a mismatch ! !-- between the previuos and the actual run, netcdf_extend is returned ! !-- as .FALSE. ! CALL netcdf_define_header( 'ag', netcdf_extend, 0 ) ! ! ! ! !-- Remove the local file, if it can not be extended ! IF ( .NOT. netcdf_extend ) THEN ! nc_stat = NF90_CLOSE( id_set_agt ) ! CALL netcdf_handle_error( 'check_open', 42 ) ! CALL local_system( 'rm ' // TRIM( filename ) ) ! ENDIF ! ! ENDIF IF ( .NOT. netcdf_extend ) THEN ! ! !-- For runs on multiple processors create the subdirectory ! IF ( myid_char /= '' ) THEN ! IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) & ! THEN ! needs modification in case of non-extendable sets ! CALL local_system( 'mkdir DATA_PRT_NETCDF' // & ! TRIM( coupling_char ) // '/' ) ! ENDIF ! #if defined( __parallel ) ! ! ! !-- Set a barrier in order to allow that all other processors in the ! !-- directory created by PE0 can open their file ! CALL MPI_BARRIER( comm2d, ierr ) ! #endif ! ENDIF ENDIF ! !-- nc-file for virtual flight measurements CASE ( 199 ) ! !-- Set filename filename = 'DATA_1D_FL_NETCDF' // TRIM( coupling_char ) ! !-- Inquire, if there is a netCDF file from a previuos run. This should !-- be opened for extension, if its variables match the actual run. INQUIRE( FILE=filename, EXIST=netcdf_extend ) IF ( netcdf_extend ) THEN ! !-- Open an existing netCDF file for output CALL netcdf_open_write_file( filename, id_set_fl, .FALSE., 532 ) ! !-- Read header information and set all ids. If there is a mismatch !-- between the previuos and the actual run, netcdf_extend is returned !-- as .FALSE. CALL netcdf_define_header( 'fl', netcdf_extend, 0 ) ! !-- Remove the local file, if it can not be extended IF ( .NOT. netcdf_extend ) THEN nc_stat = NF90_CLOSE( id_set_fl ) CALL netcdf_handle_error( 'check_open', 533 ) CALL local_system( 'rm ' // TRIM( filename ) ) ENDIF ENDIF IF ( .NOT. netcdf_extend ) THEN ! !-- Create a new netCDF output file with requested netCDF format CALL netcdf_create_file( filename, id_set_fl, .FALSE., 534 ) ! !-- Define the header CALL netcdf_define_header( 'fl', netcdf_extend, 0 ) ENDIF CASE ( 201:200+2*max_masks ) ! !-- Set filename depending on unit number IF ( file_id <= 200+max_masks ) THEN mid = file_id - 200 WRITE ( mask_char,'(A2,I2.2)') '_M', mid filename = 'DATA_MASK_NETCDF' // TRIM( coupling_char ) // & mask_char av = 0 ELSE mid = file_id - (200+max_masks) WRITE ( mask_char,'(A2,I2.2)') '_M', mid filename = 'DATA_MASK_AV_NETCDF' // TRIM( coupling_char ) // & mask_char av = 1 ENDIF ! !-- Inquire, if there is a netCDF file from a previuos run. This should !-- be opened for extension, if its dimensions and variables match the !-- actual run. INQUIRE( FILE=filename, EXIST=netcdf_extend ) IF ( netcdf_extend ) THEN ! !-- Open an existing netCDF file for output CALL netcdf_open_write_file( filename, id_set_mask(mid,av), & .TRUE., 456 ) ! !-- Read header information and set all ids. If there is a mismatch !-- between the previuos and the actual run, netcdf_extend is returned !-- as .FALSE. CALL netcdf_define_header( 'ma', netcdf_extend, file_id ) ! !-- Remove the local file, if it can not be extended IF ( .NOT. netcdf_extend ) THEN nc_stat = NF90_CLOSE( id_set_mask(mid,av) ) CALL netcdf_handle_error( 'check_open', 457 ) CALL local_system('rm ' // TRIM( filename ) ) ENDIF ENDIF IF ( .NOT. netcdf_extend ) THEN ! !-- Create a new netCDF output file with requested netCDF format CALL netcdf_create_file( filename, id_set_mask(mid,av), .TRUE., 458 ) ! !-- Define the header CALL netcdf_define_header( 'ma', netcdf_extend, file_id ) ENDIF #else CASE ( 101:109, 111:113, 116, 201:200+2*max_masks ) ! !-- Nothing is done in case of missing netcdf support RETURN #endif CASE DEFAULT WRITE( message_string, * ) 'no OPEN-statement for file-id ',file_id CALL message( 'check_open', 'PA0172', 2, 2, -1, 6, 1 ) END SELECT ! !-- Set open flag openfile(file_id)%opened = .TRUE. ! !-- Formats 8000 FORMAT (A/ & ' step time # of parts lPE sent/recv rPE sent/recv ',& 'sPE sent/recv nPE sent/recv max # of parts '/ & 109('-')) END SUBROUTINE check_open