Home

Context Navigation

source: palm/trunk/SCRIPTS/subjob @ 203

Last change on this file since 203 was 201, checked in by raasch, 16 years ago
property Rev set for mrun, build and subjob
Property svn:keywords set to `Id Rev`
File size: 41.0 KB

Rev	Line
[1]	1	#!/bin/ksh
[82]	2	# subjob - Plot-Shellskript Version: @(#)SUBJOB 1.0
[169]	3	# $Id: subjob 201 2008-09-17 11:36:34Z raasch $
[1]	4
	5	# Prozedur zum automatischen Generieren von Batch-Jobs, die unter NQS
	6	# laufen sollen und deren Ergebnis (Dayfile) zum Job-generierenden
	7	# Host zurueckgeschickt werden sollen
	8
	9
	10	# letzte Aenderung:
	11	# 29/06/94 - Siggi - Beginn mit Erstellung der Originalversion
	12	# 08/07/94 - Siggi - Originalversion abgeschlossen (Version 1.0)
	13	# 06/02/98 - Siggi - berte validiert
	14	# 27/01/01 - Siggi - ground.yonsei.ac.kr validiert, Jobs zur T3E in Korea
	15	# moeglich
	16	# 08/02/01 - Siggi - alle subjob-Meldungen ins englische uebersetzt
	17	# 25/05/02 - Siggi - Unterstuetzung des LoadLeveler
	18	# 30/05/02 - Siggi - Validierung fuer ibm-Rechner in Seoul (nobel) sowie
	19	# allgemeine Anpassungen fuer ibm-Rechner
	20	# 15/10/02 - Siggi - Neue Default-Jobklasse (p_normal) fuer IBM in Seoul
	21	# Ruecktransfer des Jobprotokolls fuer diese
	22	# Maschine abgeschaltet
	23	# 31/10/02 - Siggi - berni validiert
	24	# 06/11/02 - Siggi - Neue Jobklassen auf ibmb und ibmh
	25	# 08/11/02 - Siggi - quanero validiert
	26	# 11/12/02 - Siggi - Notification fuer Transfer-Jobs abgeschaltet
	27	# 23/01/03 - Siggi - hostname nobel changed to nobela
	28	# 06/02/03 - Siggi - gregale validated
	29	# 12/02/03 - Siggi - orkan and maestro validated
	30	# 21/02/03 - Siggi - all nobel nodes in Seoul validated
	31	# 12/03/03 - Siggi - nec at DKRZ validated
	32	# 13/03/03 - Siggi - new nqs resource variable Memory
	33	# 07/04/03 - Siggi - processor request option -c on nech needs tasks per
	34	# node
	35	# 11/04/03 - Siggi - network on ibms has attribute "shared"
	36	# 31/07/03 - Siggi - nqs2 on nech implemented (provisional: -h nech2)
	37	# cxxl added to ibmh
	38	# 29/08/03 - Siggi - changes in job queues and communication system on
	39	# ibms
	40	# 24/10/03 - Siggi - using alternate hanni address 130.75.4.2
	41	# 30/10/03 - Siggi - nech is not supported any more
	42	# 10/11/03 - Siggi - nech2 renamed to nech
	43	# 20/11/03 - Siggi - submit command on nech changed from qsub.test to qsub
	44	# 29/03/04 - Siggi - ground not supported any more, gfdl3 validated
	45	# 31/03/04 - Siggi - new option -N for node usage
	46	# 12/04/04 - Siggi - scp2 instead of scp used for transfer from decalpha
	47	# due to error in ssh installation (otherwise a prompt
	48	# for the password appears)
	49	# 23/07/04 - Siggi - changes due to the new berni configuration
	50	# (federation switch)
	51	# 01/09/04 - Gerald new job-classes on hanni
	52	# 08/09/04 - Siggi - hanni IP address changed to 130.75.4.10
	53	# 23/11/04 - Siggi - new job class cdata on hanni and berni
	54	# 03/12/04 - Siggi - notification on ibm switched of in case of
	55	# delete_dayfile = true, node usage in cdev set to
	56	# shared
	57	# 16/02/05 - Gerald hababai validated
	58	# 29/03/05 - Micha - new job class channi on hanni
	59	# 11/05/05 - Siggi - ConsumableMemory is now required as resource keyword
	60	# on ibms
	61	# 24/05/05 - Siggi - Default queue on ibms changed from p_normal_1.3 to
	62	# p_normal
	63	# 30/06/05 - Siggi - network changed for queue cdev from "us" to "ip"
	64	# 12/07/05 - Siggi - in network.mpi on ibmh/ibmb "csss" changed to
	65	# "sn_all", new job class cexp
	66	# 08/09/05 - Siggi - IP-address of gfdl3 changed
	67	# 31/10/05 - Siggi - new job class pp on hurricane, serial jobs on
	68	# hurricane (with -X0)
	69	# 01/11/05 - Siggi - missing queue for jobs submitted on nech (for nech)
	70	# added
	71	# 30/12/05 - Siggi - change of IP adresses in subnet 130.75.105
	72	# 09/02/06 - Siggi - ibmy admitted
	73	# 10/02/06 - Siggi - scp2 changed to /bin/scp on decalpha
	74	# 13/04/06 - Siggi - ostria admitted
	75	# 18/04/06 - Siggi - new option -O for OpenMP usage
	76	# 24/05/06 - Siggi - lctit admitted, ftpjob renamed scpjob
	77	# 25/07/06 - Siggi - gfdl5 (ibmy) admitted for submitting jobs
	78	# 27/09/06 - Siggi - breg/hreg extended with berni/hanni
	79	# 25/10/06 - Siggi - data_limit set to 1.76 GByte on hanni and berni
	80	# 28/11/06 - Siggi - levanto admitted
[5]	81	# 13/02/07 - Siggi - hpmuk releated code removed
[35]	82	# 01/03/07 - Siggi - adjustments for RIAM machines gate and NEC-SX8 (n-sx)
[82]	83	# 12/04/07 - Siggi - option -f (filetransfer protocol) removed, scp only
[102]	84	# 27/07/07 - Siggi - autan admitted
[108]	85	# 03/08/07 - Marcus- lcfimm admitted
[113]	86	# 08/10/07 - Siggi - further job classes added for hanni (csoloh...)
[118]	87	# 15/10/07 - Siggi - preliminary adjustments for lctit based on Jin's
	88	# suggestions
[122]	89	# 19/10/07 - Marcus- add new optional argument -g group_number
[125]	90	# 19/10/07 - Siggi - a ";" was missing in the last change done by Marcus
[129]	91	# 30/10/07 - Marcus- further adjustments for queues on lctit
[164]	92	# 15/05/08 - Siggi - adjustments for lcxt4 (Bergen Center for Computational
	93	# Science)
[179]	94	# 14/07/08 - Siggi - adjustments for lcsgih
[1]	95
	96
	97	# VARIABLENVEREINBARUNGEN + DEFAULTWERTE
	98	delete_dayfile=false
[122]	99	group_number=none
[1]	100	locat=normal
	101	no_default_queue=none
	102	no_submit=false
	103	job_catalog="~/job_queue"
	104	job_name=none
	105	local_user=$LOGNAME
	106	node_usage=shared
	107	numprocs=1
	108	punkte="..........................................................."
	109	submcom=qsub
	110	queue=default
	111	remote_host=none
	112	remote_user=""
	113	verify=true
	114
	115	typeset -i cputime=0 memory=0 Memory=0 minuten resttime sekunden stunden
	116	typeset -i inumprocs nodes=0 tasks_per_node=0 threads_per_task=1
	117	typeset -L20 spalte1
	118	typeset -R40 spalte2
	119	typeset -L60 spalte3
	120
	121
	122
	123	# FEHLERBEHANDLUNG
	124	# BEI EXIT:
	125	trap 'if [[ $locat != normal ]]
	126	then
	127	case $locat in
	128	(option) printf "\n --> available optios can be displayed"
	129	printf " by typing:"
	130	printf "\n \"subjob ?\" \n";;
	131	(ftpcopy\|parameter\|scp\|verify) printf "\n";;
	132	(*) printf "\n +++ unknown error"
	133	printf "\n please inform S. Raasch!\n"
	134	esac
	135	[[ -f $job_to_send ]] && rm $job_to_send
	136	printf "\n\n+++ SUBJOB killed \n\n"
	137	fi' exit
	138
	139
	140	# BEI TERMINAL-BREAK:
	141	trap '[[ -f $job_to_send ]] && rm $job_to_send
	142	printf "\n\n+++ SUBJOB killed \n\n"
	143	exit
	144	' 2
	145
	146
	147
	148
	149	# LOKALEN HOSTNAMEN FESTSTELLEN
	150	local_host=$(hostname)
	151
	152
	153
	154	# HOSTSPEZIFISCHE VARIABLEN VEREINBAREN BZW. PRUEFEN, OB LOKALER HOST
	155	# UEBERHAUPT ZULAESSIG IST
	156	case $local_host in
	157	(atmos) local_addres=172.20.25.35; local_host=lcide;;
[102]	158	(autan) local_addres=130.75.105.57; local_host=lcmuk;;
[5]	159	(bora) local_addres=130.75.105.103; local_host=lcmuk;;
[1]	160	(breg-en0\|berni-en0) local_addres=130.73.230.10; local_host=ibmb;;
[12]	161	(breva) local_addres=130.75.105.98; local_host=lcmuk;;
[196]	162	(b01*) local_addres=130.73.232.102; local_host=lcsgib;;
[108]	163	(compute-*.local) local_addres=172.20.4.2; local_host=lcfimm;;
[1]	164	(cs*) local_addres=136.172.44.131; local_host=nech;;
[5]	165	(elephanta) local_addres=130.75.105.6; local_host=lcmuk;;
[108]	166	(fimm.bccs.uib.no) local_addres=172.20.4.2; local_host=lcfimm;;
[101]	167	(gallego) local_addres=130.75.105.10; local_host=lcmuk;;
[35]	168	(gate\|n-sx) local_addres=133.5.178.11; local_host=neck;;
[1]	169	(gfdl5) local_addres=165.132.26.58; local_host=ibmy;;
	170	(gfdl3.yonsei.ac.kr) local_addres=165.132.26.56; local_host=decalpha;;
[5]	171	(gregale) local_addres=130.75.105.109; local_host=lcmuk;;
	172	(hababai) local_addres=130.75.105.108; local_host=lcmuk;;
[164]	173	(hexagon.bccs.uib.no) local_addres=129.177.20.113; local_host=lcxt4;;
[1]	174	(hreg-en0\|hanni-en0) local_addres=130.75.4.10; local_host=ibmh;;
[181]	175	(h01*) local_addres=130.75.4.102; local_host=lcsgih;;
[5]	176	(irifi) local_addres=130.75.105.104; local_host=lcmuk;;
	177	(levanto) local_addres=130.75.105.45; local_host=lcmuk;;
	178	(maestro) local_addres=130.75.105.2; local_host=lcmuk;;
[164]	179	(nid*) local_addres=129.177.20.113; local_host=lcxt4;;
[1]	180	(nobel*) local_addres=150.183.5.101; local_host=ibms;;
[5]	181	(orkan) local_addres=130.75.105.3; local_host=lcmuk;;
	182	(ostria) local_addres=130.75.105.106; local_host=lcmuk;;
	183	(quanero) local_addres=130.75.105.107; local_host=lcmuk;;
[1]	184	(scirocco) local_addres=172.20.25.41; local_host=lcmuk;;
[181]	185	(service100) local_addres=130.75.4.102; local_host=lcsgih;;
[1]	186	(sun1\|sun2) local_addres=130.75.6.1; local_host=unics;;
[181]	187	(r1*) local_addres=130.75.4.102; local_host=lcsgih;;
[196]	188	(r2*) local_addres=130.73.232.102; local_host=lcsgib;;
[1]	189	(tgg*) local_addres=172.17.75.161; local_host=lctit;;
	190	(vorias) local_addres=172.20.25.43; local_host=lcmuk;;
	191	(*) printf "\n +++ \"$local_host\" unknown";
	192	printf "\n please inform S. Raasch!";
	193	locat=parameter; exit;;
	194	esac
	195
	196
	197
	198	# REMOTE HOST DEFAULTMAESSIG = LOCAL HOST SETZEN
	199	remote_host=$local_host
	200
	201
	202
	203
	204	# PROZEDUROPTIONEN EINLESEN
[122]	205	while getopts :c:dDg:h:m:n:N:O:q:t:T:u:vX: option
[1]	206	do
	207	case $option in
	208	(c) job_catalog=$OPTARG;;
	209	(d) delete_dayfile=true;;
	210	(D) no_submit=true;;
[125]	211	(g) group_number=$OPTARG;;
[1]	212	(h) remote_host=$OPTARG;;
	213	(m) memory=$OPTARG;;
	214	(n) job_name=$OPTARG;;
	215	(N) node_usage=$OPTARG;;
	216	(O) threads_per_task=$OPTARG;;
	217	(q) no_default_queue=$OPTARG;;
	218	(t) cputime=$OPTARG;;
	219	(T) tasks_per_node=$OPTARG;;
	220	(u) remote_user=$OPTARG;;
	221	(v) verify=false;;
	222	(X) numprocs=$OPTARG;;
	223	(\?) printf "\n +++ Option $OPTARG unknown \n";
	224	locat=option; exit;;
	225	esac
	226	done
	227
	228
	229	# JOBDATEINAMEN ALS NAECHSTES ARGUMENT HOLEN
	230	shift OPTIND-1; file_to_send=$1
	231
	232
	233	# KURZE AUFRUFBESCHREIBUNG WIRD HIER AUSGEGEBEN
	234	if [ "$1" = "?" ]
	235	then
	236	(printf "\n *** subjob can be called as follows:\n"
	237	printf "\n subjob -c.. -d -D -h.. -m.. -q.. -t.. -u.. -v <jobfile>\n"
	238	printf "\n Description of available options:\n"
	239	printf "\n Option Description Default-Value"
	240	printf "\n -c job-input- and output-catalog ~/job_queue"
	241	printf "\n -d no job-protocol will be created ---"
	242	printf "\n -D only the job-file will be created ---"
	243	printf "\n -h execution host, available hosts: $remote_host"
[5]	244	printf "\n ibm, ibmb, ibmh, ibms, ibmy, lcmuk,"
[35]	245	printf "\n lctit, nech, neck, unics"
[1]	246	printf "\n -m memory demand per process in MByte ---"
	247	printf "\n -n jobname <jobdatei>"
	248	printf "\n -O threads per task (for OpenMP usage) 1"
	249	printf "\n -q job-queue to be used default"
	250	printf "\n -t allowed cpu-time in seconds ---"
	251	printf "\n -T tasks per node (on parallel hosts) ---"
	252	printf "\n -u username on execution host from .netrc"
	253	printf "\n -v no prompt for confirmation ---"
	254	printf "\n -X # of processors (on parallel hosts) 1"
	255	printf "\n "
	256	printf "\n The only possible positional parameter is <jobfile>:"
	257	printf "\n The complete NQS-job must be provided here."
	258	printf "\n <jobfile>=? creates this outline\n\n") \| more
	259	exit
	260	fi
	261
	262
	263
	264	# PRUEFEN, OB JOBDATEI ANGEGEBEN WURDE UND OB SIE AUCH EXISTIERT
	265	if [[ "$file_to_send" = "" ]]
	266	then
	267	printf "\n +++ job-file missing"
	268	locat=parameter; exit
	269	else
	270	if [[ -f $file_to_send ]]
	271	then
	272	true
	273	else
	274	printf "\n +++ job-file: "
	275	printf "\n $file_to_send"
	276	printf "\n does not exist"
	277	locat=parameter; exit
	278	fi
	279	fi
	280
	281
	282
	283	# FALLS KEIN JOBNAME ANGEGEBEN WURDE, WIRD JOBNAME = JOBDATEINAME
	284	# GESETZT. VORAUSSETZUNG: JOBDATEINAME BEINHALTET KEINE PFADE
	285	if [[ $job_name = none ]]
	286	then
	287	job_name=$file_to_send
	288	fi
	289	if [[ $(echo $job_name \| grep -c "/") != 0 ]]
	290	then
	291	printf "\n +++ job-file name: "
	292	printf "\n $job_name"
	293	printf "\n must not contain \"/\"-characters"
	294	locat=parameter; exit
	295	fi
	296
	297
	298
	299
	300	# HOSTSPEZIFISCHE GROESSEN VEREINBAREN BZW. ABBRUCH BEI UNZULAESSIGEM HOST
	301	# ODER WENN HOST NICHT ANGEGEBEN WURDE
	302	if [[ $remote_host = none ]]
	303	then
	304	printf "\n +++ host missing"
	305	locat=option; exit
	306	else
	307	case $remote_host in
	308	(ibm) queue=p690_standard; remote_addres=134.76.99.81; submcom=/usr/lpp/LoadL/full/bin/llsubmit;;
	309	(ibmb) queue=cpar; remote_addres=130.73.230.10; submcom=/usr/lpp/LoadL/full/bin/llsubmit;;
	310	(ibmh) queue=cpar; remote_addres=130.75.4.10; submcom=/usr/lpp/LoadL/full/bin/llsubmit;;
	311	(ibms) queue=p_normal; remote_addres=150.183.5.101; submcom=/usr/lpp/LoadL/full/bin/llsubmit;;
	312	(ibmy) queue=parallel; remote_addres=165.132.26.58; submcom=/usr/lpp/LoadL/full/bin/llsubmit;;
[108]	313	(lcfimm) remote_addres=172.20.4.2; submcom=/opt/torque/bin/qsub;;
[196]	314	(lcsgib) queue=smallq; remote_addres=130.73.232.102; submcom=/opt/moab/bin/msub;;
[191]	315	(lcsgih) queue=smallq; remote_addres=130.75.4.102; submcom=/opt/moab/bin/msub;;
[118]	316	(lctit) queue=lctit; remote_addres=172.17.75.161; submcom=/n1ge/TITECH_GRID/tools/bin/n1ge;;
[164]	317	(lcxt4) remote_addres=129.177.20.113; submcom=/opt/torque/2.3.0/bin/qsub;;
[1]	318	(nech) qsubmem=memsz_job; qsubtime=cputim_job; remote_addres=136.172.44.147; submcom="/usr/local/bin/qsub";;
[35]	319	(neck) qsubmem=memsz_job; qsubtime=cputim_job; remote_addres=133.5.178.11; submcom="/usr/bin/nqsII/qsub";;
[1]	320	(vpp) qsubmem=m; qsubtime=t; queue=vpp; remote_addres=130.75.4.130;;
	321	(unics) qsubmem=d; qsubtime=t; queue=unics; remote_addres=130.75.6.1;;
	322	(*) printf "\n +++ hostname \"$remote_host\" not allowed";
	323	locat=parameter; exit;;
	324	esac
	325	fi
	326
	327
	328	# EVTL. PRUEFEN, OB ANGEGEBENE QUEUE ZULAESSIG IST
	329	if [[ $no_default_queue != none ]]
	330	then
	331	error=false
	332	ndq=$no_default_queue
	333	case $remote_host in
	334	(ibm) case $ndq in
	335	(p690_express\|p690_standard\|p690_long) error=false;;
	336	(*) error=true;;
	337	esac;;
	338	(ibmb) case $ndq in
	339	(cdata\|cdev\|cexp\|c1\|cshare\|csolo\|cspec) error=false;;
	340	(*) error=true;;
	341	esac;;
	342	(ibmh) case $ndq in
[113]	343	(cdata\|cdev\|cexp\|channi\|cxxl\|c1\|cshare\|csolo\|csoloh3h\|csoloh6h\|csoloh12h\|csoloh1d\|csoloh2d\|cspec) error=false;;
[1]	344	(*) error=true;;
	345	esac;;
	346	(ibms) case $ndq in
	347	(express\|normal\|p_express\|p_normal\|p_normal_1.3\|p_normal_1.7\|grand) error=false;;
	348	(*) error=true;;
	349	esac;;
	350	(ibmy) case $ndq in
	351	(parallel) error=false;;
	352	(*) error=true;;
	353	esac;;
[191]	354	(lcsgib\|lcsgih) case $ndq in
	355	(testq\|smallq\|bigq) error=false;;
	356	(*) error=true;;
	357	esac;;
[1]	358	(lctit) case $ndq in
[129]	359	(novice\|sla1\|sla2\|sla3\|RAM64GB\|RAM128GB) error=false;;
[1]	360	(*) error=true;;
	361	esac;;
	362	(t3eb) case $ndq in
	363	(berte\|p50\|p100\|p392\|forfree\|p25himem) error=false;;
	364	(*) error=true;;
	365	esac;;
	366	(t3eh) case $ndq in
	367	(para_t3e\|em\|k\|l\|lm\|comp_t3e\|c\|p\|ht) error=false;;
	368	(*) error=true;;
	369	esac;;
	370	(t3ej2\|t3ej5) case $ndq in
	371	(low\|normal\|high) error=false;;
	372	(*) error=true;;
	373	esac;;
	374	(t3es) case $ndq in
	375	(batch\|serial-4\|pe4\|p48\|pe16\|pe32\|pe64\|pe128) error=false;;
	376	(*) error=true;;
	377	esac;;
	378	(unics) case $ndq in
	379	(unics\|ht) error=false;;
	380	(*) error=true;;
	381	esac;;
	382	esac
	383	if [[ $error = true ]]
	384	then
	385	printf "\n +++ queue \"$no_default_queue\" on host \"$remote_host\" not allowed"
	386	locat=parameter; exit
	387	else
	388	queue=$no_default_queue
	389	fi
	390	fi
	391
	392
	393
	394	# KNOTENNUTZUNG IN ENTWICKLERQUEUE MUSS SHARED SEIN
	395	if [[ $node_usage != shared && $queue = cdev ]]
	396	then
	397	node_usage=shared
	398	fi
	399
	400
	401
	402	# PRUEFEN DER CPU-ZEIT, ZEIT NACH STUNDEN, MINUTEN UND SEKUNDEN
	403	# AUFTEILEN
	404	done=false
	405	while [[ $done = false ]]
	406	do
	407	if (( $cputime <= 0 ))
	408	then
	409	printf "\n +++ wrong cpu-time or cpu-time missing"
	410	printf "\n >>> Please type cpu-time in seconds as INTEGER:"
	411	printf "\n >>> "
	412	read cputime 1>/dev/null 2>&1
	413	else
	414	done=true
	415	fi
	416	done
	417	if [[ $remote_host = nech ]]
	418	then
	419	if (( tasks_per_node != 0 ))
	420	then
	421	(( cputime = cputime * tasks_per_node ))
	422	elif [[ $numprocs != 0 ]]
	423	then
	424	(( cputime = cputime * numprocs ))
	425	fi
	426	fi
	427	(( stunden = cputime / 3600 ))
	428	(( resttime = cputime - stunden * 3600 ))
	429	(( minuten = resttime / 60 ))
	430	(( sekunden = resttime - minuten * 60 ))
	431	timestring=${stunden}:${minuten}:${sekunden}
	432
	433
	434
	435	# PRUEFEN DER KERNSPEICHERANFORDERUNG
	436	done=false
	437	while [[ $done = false ]]
	438	do
	439	if (( memory <= 0 ))
	440	then
	441	printf "\n +++ wrong memory demand or memory demand missing"
	442	printf "\n >>> Please type memory in MByte per process as INTEGER:"
	443	printf "\n >>> "
	444	read memory 1>/dev/null 2>&1
	445	else
	446	done=true
	447	fi
	448	done
	449
[35]	450	if [[ $remote_host = nech \|\| $remote_host = neck ]]
[1]	451	then
	452	if (( tasks_per_node != 0 ))
	453	then
	454	(( Memory = memory * tasks_per_node / 1000 ))
	455	elif [[ $numprocs != 0 ]]
	456	then
	457	(( Memory = memory * numprocs / 1000 ))
	458	else
	459	(( Memory = memory / 1000 ))
	460	fi
	461	fi
	462
	463
	464	# SPEICHERBERECHNUNG BEI OPENMP-NUTZUNG
	465	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
	466	then
	467	(( memory = memory * threads_per_task ))
	468	fi
	469
	470
	471	# BERECHNUNG DER ANZAHL DER ZU VERWENDENDEN KNOTEN
	472	if (( tasks_per_node != 0 ))
	473	then
	474	(( nodes = numprocs / ( tasks_per_node * threads_per_task ) ))
	475	fi
	476
	477
	478
	479	# HEADER-AUSGABE
	480	if [[ $verify = true ]]
	481	then
	482	printf "\n\n"
	483	printf "#--------------------------------------------------------------# \n"
	484	spalte1=SUBJOB;spalte2=$(date)
	485	printf "\| $spalte1$spalte2 \| \n"
	486	printf "\| \| \n"
	487	printf "\| values of parameters/options: \| \n"
	488	spalte1=local_host$punkte; spalte2=$punkte$local_host
	489	printf "\| $spalte1$spalte2 \| \n"
	490	spalte1=remote_host$punkte; spalte2=$punkte$remote_host
	491	printf "\| $spalte1$spalte2 \| \n"
	492	spalte1=queue$punkte; spalte2=$punkte$queue
	493	printf "\| $spalte1$spalte2 \| \n"
	494	spalte1=memory$punkte; spalte2="$punkte$memory mb"
	495	printf "\| $spalte1$spalte2 \| \n"
	496	spalte1=cputime$punkte; spalte2="$punkte$cputime sec"
	497	printf "\| $spalte1$spalte2 \| \n"
	498	spalte1=job_name$punkte; spalte2="$punkte$job_name"
	499	printf "\| $spalte1$spalte2 \| \n"
	500	printf "#--------------------------------------------------------------# \n\n"
	501
	502
	503	# KONTROLLABFRAGE, OB ALLES O.K.
	504	antwort="dummy"
	505	while [[ $antwort != y && $antwort != Y && $antwort != n && $antwort != N ]]
	506	do
	507	read antwort?" >>> continue (y/n) ? "
	508	done
	509	if [[ $antwort = n \|\| $antwort = N ]]
	510	then
	511	locat=verify; exit
	512	fi
	513	printf "\n"
	514	fi
	515
	516
	517
	518	# ZUFALLSKENNUNG GENERIEREN UND JOBNAMEN AUF ZIELRECHNER BESTIMMEN
	519	kennung=$RANDOM
	520	job_on_remhost=${job_name}_${kennung}_$local_host
	521	job_to_send=job_to_send_$kennung
	522	if [[ $delete_dayfile = false ]]
	523	then
	524	remote_dayfile=${local_host}_${job_name}_result_$kennung
	525	local_dayfile=${remote_host}_${job_name}
	526	else
	527	remote_dayfile=/dev/null
	528	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
	529	then
	530	notification='# @ notification = never'
	531	fi
	532	fi
	533
	534
	535
	536	# QSUB- ODER LL-KOMMANDOS BZW. SKRIPTE GENERIEREN
	537	if [[ $(echo $remote_host \| cut -c1-3) = ibm && $numprocs != 0 ]]
	538	then
	539
	540	if [[ $remote_host = ibmy ]]
	541	then
	542	consumable_memory=""
	543	else
	544	consumable_memory="ConsumableMemory($memory mb)"
	545	fi
	546	if [[ $queue = cdev ]]
	547	then
	548	data_limit="# @ data_limit = 1.76gb"
	549	network_to_use="# @ network.mpi = sn_all,shared,ip"
	550	else
	551	if [[ $remote_host = ibms ]]
	552	then
	553	network_to_use="# @ network.mpi = csss,shared,us"
	554	elif [[ $remote_host = ibmy ]]
	555	then
	556	network_to_use=""
	557	else
	558	network_to_use="# @ network.mpi = sn_all,shared,us"
	559	data_limit="# @ data_limit = 1.76gb"
	560	fi
	561	fi
	562
	563	cat > $job_to_send << %%END%%
	564	#!/bin/ksh
	565
	566	# @ job_type = parallel
	567	# @ job_name = palm
	568	# @ wall_clock_limit = ${timestring},$timestring
	569	# @ resources = ConsumableCpus($threads_per_task) $consumable_memory
	570	# @ output = $remote_dayfile
	571	# @ error = $remote_dayfile
	572	# @ image_size = 50
	573	# @ class = $queue
	574	# @ environment = OMP_NUM_THREADS=$threads_per_task; MP_SHARED_MEMORY=yes
	575	$network_to_use
	576	$data_limit
	577	$notification
	578
	579	%%END%%
	580
	581	if (( nodes > 0 ))
	582	then
	583
	584	cat >> $job_to_send << %%END%%
	585	# @ node = $nodes
	586	# @ tasks_per_node = $tasks_per_node
	587	# @ node_usage = $node_usage
	588	# @ queue
	589
	590	%%END%%
	591
	592	else
	593
	594	if [[ $remote_host != ibmy ]]
	595	then
	596
	597	cat >> $job_to_send << %%END%%
	598	# @ blocking = unlimited
	599	# @ total_tasks = $numprocs
	600	# @ node_usage = $node_usage
	601	# @ queue
	602
	603	%%END%%
	604
	605	else
	606
	607	cat >> $job_to_send << %%END%%
	608	# @ node = 1
	609	# @ total_tasks = $numprocs
	610	# @ queue
	611
	612	%%END%%
	613
	614	fi
	615
	616	fi
	617
	618	elif [[ $(echo $remote_host \| cut -c1-3) = ibm && $numprocs = 0 ]]
	619	then
	620
	621	cat > $job_to_send << %%END%%
	622	#!/bin/ksh
	623
	624	# @ job_type = serial
	625	# @ node_usage = $node_usage
	626	# @ job_name = palm
	627	# @ wall_clock_limit = ${timestring},$timestring
	628	# @ resources = ConsumableCpus(1) ConsumableMemory(1 gb)
	629	# @ output = $remote_dayfile
	630	# @ error = $remote_dayfile
	631	# @ class = $queue
	632	$notification
	633
	634	# @ queue
	635
	636	%%END%%
	637
[108]	638	elif [[ $remote_host = lcfimm ]]
	639	then
	640
	641	if [[ $numprocs != 0 ]]
	642	then
	643	cat > $job_to_send << %%END%%
	644	#!/bin/ksh
	645	#PBS -N $job_name
	646	#PBS -A nersc
	647	#PBS -l walltime=$timestring
	648	#PBS -l nodes=${nodes}:ppn=$tasks_per_node
	649	#PBS -l pmem=${memory}mb
	650	#PBS -m abe
	651	#PBS -M igore@nersc.no
	652	#PBS -o $remote_dayfile
	653	#PBS -j oe
	654	mpd &
	655
	656	%%END%%
	657
[168]	658	else
	659	cat > $job_to_send << %%END%%
	660	#!/bin/ksh
	661	#PBS -N $job_name
	662	#PBS -A nersc
	663	#PBS -l walltime=$timestring
	664	#PBS -l ncpus=1
	665	#PBS -l pmem=${memory}mb
	666	#PBS -m abe
	667	#PBS -M igore@nersc.no
	668	#PBS -o $remote_dayfile
	669	#PBS -j oe
	670
	671	%%END%%
	672
	673	fi
	674
[181]	675	elif [[ $remote_host = lcsgih \|\| $remote_host = lcsgib ]]
[179]	676	then
	677
[191]	678	if [[ $queue = testq ]]
	679	then
	680	queue_directive="#PBS -q $queue"
	681	else
	682	queue_directive=""
	683	fi
	684
[179]	685	if [[ $numprocs != 0 ]]
	686	then
	687	cat > $job_to_send << %%END%%
[181]	688	#!/bin/bash
[179]	689	#PBS -N $job_name
	690	#PBS -l walltime=$timestring
[181]	691	#PBS -l nodes=$nodes:ppn=${tasks_per_node}
	692	#PBS -l feature=$sgi_feature
	693	#PBS -l naccesspolicy=$node_usage
[179]	694	#PBS -o $remote_dayfile
	695	#PBS -j oe
[191]	696	$queue_directive
[179]	697
	698	. /usr/share/modules/init/bash
[196]	699	module load mpt
	700	# module load mvapich2/1.2rc1-intel
	701	# module load mvapich2
[179]	702	module load netcdf
[181]	703	export LD_LIBRARY_PATH=/sw/intel/cce/10.1.015/lib:/sw/intel/fce/10.1.015/lib:/sw/dataformats/netcdf/3.6.2/lib:\$LD_LIBRARY_PATH
	704	echo ld_library_path=\$LD_LIBRARY_PATH
[179]	705
	706	%%END%%
	707
	708	else
	709	cat > $job_to_send << %%END%%
	710	#PBS -S /bin/bash
	711	#PBS -N $job_name
	712	#PBS -l walltime=$timestring
	713	#PBS -l ncpus=1
	714	#PBS -o $remote_dayfile
	715	#PBS -e $remote_dayfile
	716
	717	%%END%%
	718
	719	fi
	720
[164]	721	elif [[ $remote_host = lcxt4 ]]
	722	then
	723
	724	if [[ $numprocs != 0 ]]
	725	then
	726	cat > $job_to_send << %%END%%
	727	#!/bin/ksh
	728	#PBS -S /bin/ksh
	729	#PBS -N $job_name
	730	#PBS -A nersc
	731	#PBS -l walltime=$timestring
	732	#PBS -l mppwidth=${numprocs}
	733	#PBS -l mppnppn=${tasks_per_node}
	734	#PBS -m abe
	735	#PBS -M igore@nersc.no
	736	#PBS -o $remote_dayfile
	737	#PBS -e $remote_dayfile
	738
	739	%%END%%
	740
[108]	741	else
	742	cat > $job_to_send << %%END%%
	743	#!/bin/ksh
[168]	744	#PBS -S /bin/ksh
[108]	745	#PBS -N $job_name
	746	#PBS -A nersc
	747	#PBS -l walltime=$timestring
	748	#PBS -l ncpus=1
	749	#PBS -l pmem=${memory}mb
	750	#PBS -m abe
	751	#PBS -M igore@nersc.no
	752	#PBS -o $remote_dayfile
[168]	753	#PBS -e $remote_dayfile
[108]	754
	755	%%END%%
	756
	757	fi
	758
[1]	759	elif [[ $remote_host = nech ]]
	760	then
	761
	762	if (( nodes > 1 ))
	763	then
	764	cat > $job_to_send << %%END%%
	765	#!/bin/ksh
	766	#PBS -l cpunum_prc=$tasks_per_node,cputim_job=$cputime
	767	#PBS -l ${qsubmem}=${Memory}gb
	768	#PBS -b $nodes
	769	#PBS -o $remote_dayfile
	770	#PBS -N palm
	771	#PBS -j o
	772	#PBS -T mpisx
	773
	774	%%END%%
	775
	776	elif [[ $numprocs != 0 ]]
	777	then
	778	cat > $job_to_send << %%END%%
	779	#!/bin/ksh
	780	#PBS -l cpunum_prc=$tasks_per_node,cputim_job=$cputime
	781	#PBS -l ${qsubmem}=${Memory}gb
	782	#PBS -o $remote_dayfile
	783	#PBS -N palm
	784	#PBS -j o
	785
	786	%%END%%
	787
	788	else
	789	cat > $job_to_send << %%END%%
	790	#!/bin/ksh
	791	#PBS -l ${qsubmem}=${Memory}gb,${qsubtime}=$cputime
	792	#PBS -o $remote_dayfile
	793	#PBS -j o
	794
	795	%%END%%
	796
	797	fi
	798
[35]	799	elif [[ $remote_host = neck ]]
	800	then
	801
	802	if (( nodes > 1 ))
	803	then
	804	cat > $job_to_send << %%END%%
	805	#!/bin/ksh
	806	#PBS -l cpunum_prc=$tasks_per_node,cputim_job=$cputime
	807	#PBS -l ${qsubmem}=${Memory}gb
	808	#PBS -b $nodes
	809	#PBS -o $remote_dayfile
	810	#PBS -N palm
	811	#PBS -j o
	812	#PBS -T mpisx
	813
	814	%%END%%
	815
	816	elif [[ $numprocs != 0 ]]
	817	then
	818	cat > $job_to_send << %%END%%
	819	#!/bin/ksh
	820	#PBS -q ${queue}
	821	#PBS -l cpunum_prc=$tasks_per_node,cputim_job=$cputime
	822	#PBS -l ${qsubmem}=${Memory}gb
	823	#PBS -o $remote_dayfile
	824	#PBS -N palm
	825	#PBS -j o
	826	#PBS -T mpisx
	827
	828	%%END%%
	829
	830	else
	831	cat > $job_to_send << %%END%%
	832	#!/bin/ksh
	833	#PBS -l ${qsubmem}=${Memory}gb,${qsubtime}=$cputime
	834	#PBS -o $remote_dayfile
	835	#PBS -j o
	836
	837	%%END%%
	838
	839	fi
	840
[1]	841	elif [[ $remote_host = lctit ]]
	842	then
	843	cat > $job_to_send << %%END%%
	844	#!/bin/bash
	845	#$ -S /bin/bash
	846	cd $job_catalog
[69]	847	export PATH=$PALM_BIN:\$PATH
	848	echo \$PATH
[1]	849
	850	%%END%%
	851
	852	# OPTIONEN FUER SUBMIT-KOMMANDO ZUSAMMENSTELLEN
[118]	853	# submcom="$submcom -N $job_name -sgeout $remote_dayfile -q default"
[122]	854	submcom="$submcom -g $group_number -N $job_name -rt 4320 -sgeout $remote_dayfile -q $node_usage "
[1]	855
	856	else
	857
	858	cat > $job_to_send << %%END%%
	859	# @\$-q ${queue}
	860	# @\$-l${qsubtime} $timestring
	861	# @\$-l${qsubmem} ${memory}mb
	862	# @\$-o $remote_dayfile
	863	# @\$-eo
	864
	865	%%END%%
	866
	867	fi
	868
	869
	870	# BEI RECHNUNG AUF REMOTE-MASCHINEN RUECKTRANSFER DES DAYFILES PER TRAP
	871	# BEI EXIT VERANLASSEN
	872	# VEKTORRECHNER MUSS EIGENEN JOB STARTEN, DA DORT NOHUP NICHT FUNKTIONIERT
	873	# AUF IBM IN SEOUL IST RUECKTRANSFER ZUR ZEIT GENERELL NICHT MOEGLICH
	874	if [[ $delete_dayfile = false && $remote_host != $local_host ]]
	875	then
	876	echo "set +vx" >> $job_to_send
	877	echo "trap '" >> $job_to_send
	878	echo "set +vx" >> $job_to_send
[181]	879	if [[ $(echo $remote_host \| cut -c1-3) = ibm \|\| $(echo $remote_host \| cut -c1-5) = lcsgi \|\| $(echo $remote_host \| cut -c1-3) = nec \|\| $remote_host = lctit ]]
[1]	880	then
	881	if [[ $remote_host = ibmb \|\| $remote_host = ibmh ]]
	882	then
	883	return_queue=c1
	884	elif [[ $remote_host = ibms ]]
	885	then
	886	return_queue=p_normal
	887	elif [[ $remote_host = ibmy ]]
	888	then
	889	return_queue=serial
	890	elif [[ $remote_host = lctit ]]
	891	then
[118]	892	return_queue=sla3
[35]	893	elif [[ $remote_host = neck ]]
[1]	894	then
[35]	895	return_queue=S
[1]	896	else
	897	return_queue=unknown
	898	fi
	899
	900	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
	901	then
	902
	903	echo "echo \"#!/bin/ksh\" >> scpjob.$kennung" >> $job_to_send
	904	echo "echo \"# @ job_type = serial\" >> scpjob.$kennung" >> $job_to_send
	905	echo "echo \"# @ job_name = transfer\" >> scpjob.$kennung" >> $job_to_send
	906	echo "echo \"# @ resources = ConsumableCpus(1) ConsumableMemory(1 gb)\" >> scpjob.$kennung" >> $job_to_send
	907	echo "echo \"# @ wall_clock_limit = 00:10:00,00:10:00\" >> scpjob.$kennung " >> $job_to_send
	908	echo "echo \"# @ output = job_queue/last_job_transfer_protocol\" >> scpjob.$kennung" >> $job_to_send
	909	echo "echo \"# @ error = job_queue/last_job_transfer_protocol\" >> scpjob.$kennung" >> $job_to_send
	910	echo "echo \"# @ class = $return_queue\" >> scpjob.$kennung" >> $job_to_send
	911	echo "echo \"# @ image_size = 10\" >> scpjob.$kennung" >> $job_to_send
	912	echo "echo \"# @ notification = never\" >> scpjob.$kennung" >> $job_to_send
	913
	914	echo "echo \"# @ queue\" >> scpjob.$kennung" >> $job_to_send
	915	echo "echo \" \" >> scpjob.$kennung" >> $job_to_send
	916
	917	echo "echo \"set -x\" >> scpjob.$kennung" >> $job_to_send
	918	echo "echo \"batch_scp -d -w 10 -u $local_user $local_addres ${job_catalog}/$remote_dayfile \\\"$job_catalog\\\" $local_dayfile\" >> scpjob.$kennung" >> $job_to_send
	919	echo "echo \"exit\" >> scpjob.$kennung" >> $job_to_send
	920
	921	elif [[ $remote_host = nech ]]
	922	then
	923	echo "cd /pf/b/${remote_user}/job_queue" >> $job_to_send
	924	echo "cat > scpjob.$kennung << %%END%%" >> $job_to_send
	925	echo "#PBS -l ${qsubmem}=1GB,${qsubtime}=100" >> $job_to_send
	926	echo "#PBS -o last_job_transfer_protocol" >> $job_to_send
	927	echo "#PBS -j o" >> $job_to_send
	928	echo " " >> $job_to_send
	929	echo "set -x" >> $job_to_send
	930	echo "cd /pf/b/${remote_user}/job_queue" >> $job_to_send
	931	echo "batch_scp -d -w 10 -u $local_user $local_addres $remote_dayfile \"$job_catalog\" $local_dayfile" >> $job_to_send
	932	echo "[[ \"\$for_subjob_to_do\" != \"\" ]] && eval \$for_subjob_to_do" >> $job_to_send
	933	echo "%%END%%" >> $job_to_send
	934
[35]	935	elif [[ $remote_host = neck ]]
	936	then
	937	echo "cat > scpjob.$kennung << %%END%%" >> $job_to_send
	938	echo "#PBS -q $return_queue" >> $job_to_send
	939	echo "#PBS -l ${qsubmem}=1GB,${qsubtime}=100" >> $job_to_send
	940	echo "#PBS -o last_job_transfer_protocol" >> $job_to_send
	941	echo "#PBS -j o" >> $job_to_send
	942	echo " " >> $job_to_send
	943	echo "set -x" >> $job_to_send
	944	echo "batch_scp -d -w 10 -u $local_user $local_addres $remote_dayfile \"$job_catalog\" $local_dayfile" >> $job_to_send
	945	echo "[[ \"\$for_subjob_to_do\" != \"\" ]] && eval \$for_subjob_to_do" >> $job_to_send
	946	echo "%%END%%" >> $job_to_send
	947
[181]	948	elif [[ $(echo $remote_host \| cut -c1-5) = lcsgi ]]
	949	then
	950	echo "cat > scpjob.$kennung << %%END%%" >> $job_to_send
	951	echo "#!/bin/bash" >> $job_to_send
	952	echo "#PBS -N job_protocol_transfer" >> $job_to_send
	953	echo "#PBS -l walltime=00:02:00" >> $job_to_send
	954	echo "#PBS -l nodes=1:ppn=1" >> $job_to_send
	955	echo "#PBS -l feature=xe" >> $job_to_send
	956	echo "#PBS -o \$HOME/job_queue/last_job_transfer_protocol" >> $job_to_send
	957	echo "#PBS -j oe" >> $job_to_send
	958	echo " " >> $job_to_send
	959	echo ". /usr/share/modules/init/bash" >> $job_to_send
	960	echo "set -x" >> $job_to_send
	961	echo "batch_scp -d -w 10 -u $local_user $local_addres ${job_catalog}/$remote_dayfile \"$job_catalog\" $local_dayfile" >> $job_to_send
	962	echo "[[ \"\$for_subjob_to_do\" != \"\" ]] && eval \$for_subjob_to_do" >> $job_to_send
	963	echo "%%END%%" >> $job_to_send
	964
[1]	965	elif [[ $remote_host = lctit ]]
	966	then
	967	echo "cat > scpjob.$kennung << %%END%%" >> $job_to_send
	968	echo "set -x" >> $job_to_send
	969	echo "PATH=\$PATH:$job_catalog/../pub" >> $job_to_send
	970	echo "cd $job_catalog" >> $job_to_send
	971	echo "batch_scp -d -w 10 -u $local_user $local_addres $remote_dayfile \"$job_catalog\" $local_dayfile" >> $job_to_send
	972	echo "[[ \"\$for_subjob_to_do\" != \"\" ]] && eval \$for_subjob_to_do" >> $job_to_send
	973	echo "%%END%%" >> $job_to_send
	974
	975	else
	976
	977	echo "cat > scpjob.$kennung << %%END%%" >> $job_to_send
	978	echo "# @\\\$-q $return_queue" >> $job_to_send
	979	echo "# @\\\$-l${qsubtime} 10" >> $job_to_send
	980	echo "# @\\\$-l${qsubmem} 10mb" >> $job_to_send
	981	if [[ $remote_host = t3ej2 \|\| $remote_host = t3ej5 \|\| $remote_host = t3es ]]
	982	then
	983	echo "# @\$-l mpp_p=0" >> $job_to_send
	984	fi
	985	echo '# @\$-lF 10mb' >> $job_to_send
	986	# echo '# @\$-o /dev/null' >> $job_to_send
	987	echo '# @\$-o job_queue/last_job_transfer_protocol' >> $job_to_send
	988	echo '# @\\\$-eo' >> $job_to_send
	989	echo " " >> $job_to_send
	990	if [[ $remote_host = t3ej2 \|\| $remote_host = t3ej5 ]]
	991	then
	992	echo "set +vx" >> $job_to_send
	993	echo ". .profile" >> $job_to_send
	994	fi
	995	echo "set -x" >> $job_to_send
	996	echo "batch_scp -d -w 10 -u $local_user $local_addres ${job_catalog}/$remote_dayfile \"$job_catalog\" $local_dayfile > /dev/null" >> $job_to_send
	997	echo "[[ \"\$for_subjob_to_do\" != \"\" ]] && eval \$for_subjob_to_do" >> $job_to_send
	998	echo "%%END%%" >> $job_to_send
	999	fi
	1000
	1001	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
	1002	then
	1003	echo "llsubmit scpjob.$kennung" >> $job_to_send
[181]	1004	elif [[ $(echo $remote_host \| cut -c1-5) = lcsgi ]]
	1005	then
	1006	echo "chmod u+x scpjob.$kennung" >> $job_to_send
	1007	echo "msub scpjob.$kennung" >> $job_to_send
[1]	1008	elif [[ $remote_host = lctit ]]
	1009	then
	1010	echo "chmod u+x scpjob.$kennung" >> $job_to_send
	1011	echo "rm -rf ${job_catalog}/last_job_transfer_protocol" >> $job_to_send
	1012	echo "n1ge -N jobtransfer -q $return_queue -sgeout ${job_catalog}/last_job_transfer_protocol scpjob.$kennung" >> $job_to_send
	1013	echo "sleep 10" >> $job_to_send
	1014	elif [[ $remote_host = t3eb \|\| $remote_host = t3eh \|\| $remote_host = t3ej2 \|\| $remote_host = t3ej5 ]]
	1015	then
	1016	echo "qsub -J n scpjob.$kennung" >> $job_to_send
	1017	elif [[ $remote_host = t3es ]]
	1018	then
	1019	echo "qsub -J n -s /bin/ksh scpjob.$kennung" >> $job_to_send
	1020	else
	1021	echo "qsub scpjob.$kennung" >> $job_to_send
	1022	fi
	1023	echo "rm scpjob.$kennung" >> $job_to_send
	1024	if [[ $remote_host = nech ]]
	1025	then
	1026	echo "cd -" >> $job_to_send
	1027	fi
	1028	else
	1029	# echo "ftpcopy -d $local_addres ${job_catalog}/$remote_dayfile \"$job_catalog\" $local_dayfile" >> $job_to_send
	1030	echo "nohup ftpcopy -d -w 15 $local_addres ${job_catalog}/$remote_dayfile \"$job_catalog\" $local_dayfile > /dev/null &" >> $job_to_send
	1031	fi
	1032	echo "set -x" >> $job_to_send
	1033	echo " ' exit" >> $job_to_send
	1034	echo "set -x" >> $job_to_send
	1035	fi
	1036
	1037
	1038
	1039	# EIGENTLICHE JOB-DATEI AN QSUB-KOMMANDOS ANHAENGEN
	1040	cat $file_to_send >> $job_to_send
[69]	1041
[1]	1042	if [[ $remote_host = ibm ]]
	1043	then
	1044	echo " " >> $job_to_send
	1045	echo "exit" >> $job_to_send
	1046	fi
[69]	1047	if [[ $remote_host = lctit ]]
	1048	then
	1049	echo " " >> $job_to_send
	1050	echo "rm ~/job_queue/$job_on_remhost" >> $job_to_send
	1051	fi
[1]	1052
	1053
	1054
	1055	# USER-NAME AUF ZIELRECHNER AUS .NETRC-DATEI ERMITTELN
	1056	if [[ -z $remote_user ]]
	1057	then
	1058	if [[ $remote_host = t3eb \|\| $remote_host = t3eh \|\| $remote_host = t3ej2 \|\| $remote_host = t3ej5 \|\| $remote_host = t3es \|\| $remote_host = vpp ]]
	1059	then
	1060	grep $remote_addres ~/.netrc \| read dum dum dum remote_user dum dum
	1061	fi
	1062	fi
	1063
	1064
	1065
	1066	# JOB AUF ZIELRECHNER TRANSFERIEREN BZW. INS JOBVERZEICHNIS KOPIEREN
	1067	if [[ $no_submit = false ]]
	1068	then
	1069	if [[ $remote_host != $local_host ]]
	1070	then
	1071	[[ $verify = true ]] && printf "\n >>> transfering job to \"$remote_host\"..."
[82]	1072	if [[ $remote_host = ibms \|\| $remote_host = ibmy ]] # ssh on ibms cannot handle "~/"
[1]	1073	then
[82]	1074	job_catalog_save=$job_catalog
	1075	job_catalog=job_queue
	1076	elif [[ $remote_host = nech ]]
	1077	then
	1078	job_catalog_save=$job_catalog
	1079	job_catalog=/hpf/b/${remote_user}/job_queue
	1080	fi
	1081	if [[ $local_host = decalpha ]]
	1082	then
	1083	# VERWENDUNG VON SCP AUF DECALPHA FRAGT FEHLERHAFTERWEISE
	1084	# PASSWORT AB
	1085	/bin/scp $job_to_send ${remote_user}@${remote_addres}:${job_catalog}/$job_on_remhost
	1086	elif [[ $remote_host = nech ]]
	1087	then
	1088	# DATEIEN KOENNEN NUR UEBER DEN ARCHIVE-SERVER DES DKRZ
	1089	# TRANSFERIERT WERDEN
	1090	scp $job_to_send ${remote_user}@136.172.44.205:${job_catalog}/$job_on_remhost
[1]	1091	else
[82]	1092	scp $job_to_send ${remote_user}@${remote_addres}:${job_catalog}/$job_on_remhost
[1]	1093	fi
[82]	1094	if [[ $? = 1 ]]
	1095	then
	1096	locat=scp; exit
	1097	fi
	1098	if [[ $remote_host = ibms ]]
	1099	then
	1100	job_catalog=$job_catalog_save
	1101	fi
[1]	1102	[[ $verify = true ]] && printf "\n >>> finished\n"
	1103	else
	1104	eval job_catalog=$job_catalog
	1105	cp $job_to_send ${job_catalog}/$job_on_remhost
	1106	fi
	1107
	1108
	1109
	1110	# NQS- BZW. LOADLEVELER-JOB STARTEN
	1111	if [[ $remote_host != $local_host ]]
	1112	then
	1113	[[ $verify = true ]] && printf "\n >>> submitting job using \"qsub\"...\n"
[82]	1114	if [[ $remote_host != lctit ]]
[1]	1115	then
[191]	1116	ssh $remote_addres -l $remote_user "cd $job_catalog; $submcom $job_on_remhost; rm $job_on_remhost"
[1]	1117	else
[82]	1118	# TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
	1119	# MIT SSH, DESHALB AUFRUF PER PIPE
	1120	# UEBERGANGSWEISE CHECK, OB N1GE ENVIRONMENT WIRKLICH VERFUEGBAR
	1121	print "cd $job_catalog; chmod u+x $job_on_remhost" \| ssh $remote_addres -l $remote_user > /dev/null 2>&1
	1122	echo "first try" > send_protocol
	1123	while [[ $(cat send_protocol \| grep -c "Forwarding to N1GE") = 0 ]]
	1124	do
	1125	if [[ $(cat send_protocol \| grep -c "first try") = 1 ]]
	1126	then
	1127	printf "\n trying to submit job to TIT cluster..."
	1128	else
	1129	printf "\n +++ failed ... trying to submit again ..."
	1130	fi
	1131	print "cd $job_catalog; $submcom $job_on_remhost" \| ssh $remote_addres -l $remote_user > send_protocol 2>&1
	1132	cat send_protocol
	1133	done
	1134	sleep 10
	1135	print "cd $job_catalog; rm $job_on_remhost" \| ssh $remote_addres -l $remote_user > /dev/null 2>&1
	1136	echo "$submcom $job_on_remhost"
	1137	rm send_protocol
	1138	fi
[1]	1139
	1140	[[ $verify = true ]] && printf " >>> o.k.\n"
	1141	else
	1142	cd $job_catalog
	1143	if [[ $(echo $local_host \| cut -c1-3) = ibm ]]
	1144	then
	1145	eval $submcom $job_on_remhost
[164]	1146	elif [[ $local_host = lcfimm \|\| $local_host = lctit \|\| $localhost = lcxt4 ]]
[108]	1147	then
	1148	eval $submcom $job_on_remhost
	1149	echo "$submcom $job_on_remhost"
	1150	chmod u+x $job_on_remhost
[1]	1151	elif [[ $local_host = nech ]]
	1152	then
	1153	if [[ $queue = default ]]
	1154	then
	1155	eval $submcom $job_on_remhost
	1156	else
	1157	eval $submcom -q $queue $job_on_remhost
	1158	fi
	1159	else
	1160	qsub $job_on_remhost
	1161	fi
[69]	1162	# JOBFILE DARF AUF LCTIT NICHT GELOESCHT WERDEN!! GESCHIEHT ERST AM JOBENDE
	1163	[[ $local_host != lctit ]] && rm $job_on_remhost
[1]	1164	cd - > /dev/null
	1165	fi
	1166	fi
	1167
	1168
	1169
	1170	# ABSCHLUSSARBEITEN
	1171
	1172	if [[ $no_submit = false ]]
	1173	then
	1174	rm $job_to_send
	1175	fi
	1176	[[ $verify = true ]] && printf "\n\n *** SUBJOB finished \n\n"

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |