#!/bin/bash
# palmrun - script for running PALM jobs
#--------------------------------------------------------------------------------#
# This file is part of the PALM model system.
#
# PALM is free software: you can redistribute it and/or modify it under the terms
# of the GNU General Public License as published by the Free Software Foundation,
# either version 3 of the License, or (at your option) any later version.
#
# PALM is distributed in the hope that it will be useful, but WITHOUT ANY
# WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
# A PARTICULAR PURPOSE. See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License along with
# PALM. If not, see .
#
# Copyright 2017-2020 Leibniz Universitaet Hannover
#--------------------------------------------------------------------------------#
#
# Current revisions:
# ------------------
#
#
# Former revisions:
# -----------------
# $Id: palmrun 4481 2020-03-31 18:55:54Z monakurppa $
# add cycle number to initial files too (000),
# remove compatibility for cycle numbers which are less than three digits wide
#
# 4425 2020-02-26 15:35:00Z raasch
# hard coded path to the fileconnection file replaced by a path that is based on
# the source path which has been given in the configuration file
#
# 4303 2019-11-25 08:55:18Z raasch
# Abort if temporary working catalog cannot be created
#
# 3982 2019-05-16 11:07:31Z raasch
# bugfix: -b is not added in automatically generated batch jobs for remote hosts
#
# 3917 2019-04-18 11:46:37Z raasch
# in case of batch jobs on remote machines, copying files from SOURCES_FOR_RUN folder has
# been rearranged to avoid that input files with original names (e.g. ..._p3d) are copied
# into the temporary working catalog
#
# 3860 2019-04-04 06:23:27Z raasch
# check added, that it is not allowed to set option -b if the configuration file has been setup
# for running batch jobs on remote hosts,
# local time added to terminal output before and after saving output files
#
# 3725 2019-02-07 10:11:02Z raasch
# error messages for failed restarts extended
#
# 3682 2019-01-18 17:01:54Z knoop
# ssh-call for submitting batch jobs on remote systems modified again to avoid output
# of login messages on specific systems
#
# 3574 2018-11-28 13:14:39Z raasch
# syntax-error in last commit fixed
#
# 3573 2018-11-28 13:03:44Z raasch
# bugfixes: don't check the .palm.iofiles in restart runs + wrong cd-command
# removed,
# r3570 reverted
#
# 3570 2018-11-27 17:44:21Z kanani
# Rename job-id by run_id
#
# 3555 2018-11-22 13:50:37Z raasch
# sed-command to remove repeated space-characters replaced by tr-command, to
# guarantee mac compatible
#
# 3549 2018-11-21 15:44:44Z raasch
# ssh-call for submitting batch jobs on remote systems modified to avoid output
# of login messages on specific systems
#
# 3534 2018-11-19 15:35:16Z raasch
# batch_scp for sending back the job protocol file is called via login-node if
# a login-node has been set in the config-file
# ssh-calls rearranged to avoid output of system/user-profile messages
#
# 3505 2018-11-08 09:14:30Z raasch
# job folders are created in case that they do not exist
#
# 3455 2018-10-30 14:12:31Z raasch
# options -h and -d renamed -c and -r, respectively
#
# 3402 2018-10-23 11:49:24Z knoop
# job_id is set for compatibility reasons with older versions of config files
#
# 3313 2018-10-06 15:22:48Z knoop
# more detailed error message for outdated fileconnection file
#
# 3236 2018-09-10 09:07:06Z raasch
# warning issued in case of file connection file version mismatch,
# host_configuration renamed configuration_identifier,
# "host identifier" in header output renamed "config. identifier",
# jobname renamed run_identifier,
# run_id renamed run_id_number
# job_id renamed run_id
# option -r renamed -i
#
# 3151 2018-07-19 08:45:38Z raasch
# removed additional listing of files to be compiled, print PALM code revision
# in header
#
# 3132 2018-07-16 11:44:58Z raasch
# create consistent error messages in case of failed restarts,
# check existence of remote job catalog
#
# 3043 2018-05-25 10:47:54Z raasch
# check for setting of fast_io_catalog
#
# 3033 2018-05-23 15:26:19Z raasch
# -T option not required for interactive runs (tasks per node =
# total number of cores is assumed as default, if option is not given),
# reformatting of a few messages,
# bugfix: destination output directory is created if attribute "pe" is set in
# .palm.iofiles
#
# 2718 2018-01-02 08:49:38Z maronga
# bugfix of r2990
#
# 2718 2018-01-02 08:49:38Z maronga
# bugfix: temporary SOURCES_FOR_RUN_CATALOG now created in base_directory and
# not in the working directory from where palmrun is called
#
# 2718 2018-01-02 08:49:38Z maronga
# svfout in the activation string will be replaced now by svfin in case of
# automatic restarts
#
# 2718 2018-01-02 08:49:38Z maronga
# Introduction of new ENVIRONMENT variables read_svf and write_svf to consider
# the possible output or input of sky view factors
#
# 2718 2018-01-02 08:49:38Z maronga
# "fname" renamed to "jobname"
#
# 2718 2018-01-02 08:49:38Z maronga
# parameters are allowed in output commands (OC:)
#
# 2718 2018-01-02 08:49:38Z maronga
# bugfix: exit if no queue has been given neither with option -q nor in the
# configuration file
#
# 2718 2018-01-02 08:49:38Z maronga
# file connection file from trunk/SCRIPTS is taken by default
#
# 2718 2018-01-02 08:49:38Z maronga
# Corrected "Former revisions" section
#
# 2696 2017-12-14 17:12:51Z kanani
# Change in file header (GPL part)
#
# 2693 2017-12-13 12:33:49Z raasch
# replacement of variables given by {{}} in configuration file is now
# done in a more general way, variable names are written in small letters
#
# 2670 2017-12-06 16:32:19Z raasch
# test printouts removed
#
# 2669 2017-12-06 16:03:27Z raasch
# file attributes in .palm.iofiles restructured, "loc" attribute completely
# removed,
# wildcard (*) allowed in .palm.iofiles as file activation string for output
# files,
# informative messages in case of missing optional input files shortened
# bugfix: variable cycle explicitly interpreted with 10 as the number base
#
# 2638 2017-11-23 12:44:23Z raasch
# use of wildcards in file connection statements enabled
#
# 2605 2017-11-09 15:31:46Z raasch
# in case of remote jobs, input files with "job" or "jobopt" (new) attribute
# will not be sent with the job file any more, but copied into the
# SOURCES_FOR_RUN... folder on the remote host, before the job is submitted
#
# 2600 2017-11-01 14:11:20Z raasch
# cycle numbers are made three digits wide
#
# 2566 2017-10-20 08:50:47Z raasch
# execute command for combine_plot_fields added
# "TEMPDIR" renamed "tempdir"
# temporary working directory for local batch jobs is created immediately within
# the user's palmrun call, due to a requirement of the "grid engine" batch
# system, where the working directory is given with batch directive -wd and must
# already exist when the job is submitted,
# informative messages in non-trace mode reduced and partly reformatted
#
# 2551 2017-10-18 07:25:11Z raasch
# TEMPDIR added as replacement string to be used in batch directives
#
# 2512 2017-10-04 08:26:59Z raasch
# bugfix for determining cycle numbers of NetCDF input files
#
# 2506 2017-09-29 08:30:37Z raasch
# option -V added to check for an existing SOURCES_FOR_RUN_... folder
# host configuration added to SOURCES_FOR_RUN_... folder name
# host_identifier renamed host_configuration
# option -W added to allow for job dependencies
#
# 2501 2017-09-26 11:41:55Z raasch
# default value for number of cores (option -X) set to 1
# bugfix for mechanism which overwrites configuration file settings with values
# provided by palmrun options
#
# 2499 2017-09-22 16:47:58Z kanani
# option -h named configuration identifier
#
# 2480 2017-09-19 06:24:14Z maronga
# bugfix for last revision
#
# 2479 2017-09-19 06:12:16Z raasch
# option -A (project account number) added
#
# 2422 2017-09-08 08:25:41Z raasch
# initial revision
#
#--------------------------------------------------------------------------------#
# palmrun - script for running PALM jobs on local and remote hosts
#--------------------------------------------------------------------------------#
# DECLARATION OF VARIABLES AND THEIR DEFAULT VALUES
set +o allexport # SUPPRESS EXPORT OF ALL VARIABLES, SINCE IN THE PAST THIS
# LEAD TO PROBLEMS IN ROUTINES CALLED BY PALMRUN
# (TOO MANY ARGUMENTS - PROBLEM)
set +o noclobber # EXISTING FILES ARE ALLOWED TO BE OVERWRITTEN
typeset -i ibd=0 ibdt=0 iec=0 iic=0 iin=0 ioc=0 iout=0 nr_of_input_files=0
typeset -i nr_of_output_files=0
typeset -x -i memory=0 # HAS TO BE EXPORTED HERE, OTHERWISE AN UNKNOWN SIDE
# SIDE EFFECT MAY CAUSE DATA LOSS WHEN GETOPTS IS READING THE
# SCRIPT-OPTION ARGUMENTS
typeset -i cores cputime cpu_hours cpu_minutes cpu_seconds i ii iia iii iio
typeset -i icycle inode ival maxcycle mpi_tasks
typeset -i nodes remaining_cores run_number tasks_per_node threads_per_task
activation_string_list=""
AddFilenames=""
combine_plot_fields=true
compiler_name=""
compiler_name_ser=""
compiler_options=""
configuration_identifier="default"
cores=1
cores_atmos=0
cores_ocean=0
coupled_dist=""
cpp_options=""
cpumax=0
create_batch_job=false
create_jobfile_only=false
create_remote_batch_job=false
dashes=" ----------------------------------------------------------------------------"
defaultqueue=""
delete_temporary_catalog=true
do_compile=true
do_trace=false
executable=""
execute_command=""
execution_error=false
fileconnection_file=""
global_revision=""
hostfile=""
hp=""
keep_data_from_previous_run=false
link_local_input=false
link_local_output=false
linker_options=""
local_jobcatalog=""
locat=normal
makefile=""
max_par_io_str=""
prc=$0
while [[ $(echo $prc | grep -c "/") != 0 ]]
do
prc=`echo $prc | cut -f2- -d"/"`
done
module_calls=""
palmrun_memory=""
palmrun_script_name=$prc
openmp=false
previous_job=""
project_account=""
queue=none
read_svf=""
restart_run=false
return_address=""
remote_jobcatalog=""
remote_username=""
running_in_batch_mode=false
running_in_test_mode=false
run_coupled_model=false
run_id=""
run_id_number=""
run_identifier=test
silent=false
source_list=""
source_path=""
tasks_per_node=0
threads_per_task=1
transfer_problems=false
user_source_path=""
use_existing_sources_folder=""
use_openmp=false
version="palmrun 1.0 Rev$Rev: 4481 $"
working_directory=`pwd`
write_binary=""
write_svf=""
# ERROR HANDLING IN CASE OF EXIT
trap 'if [[ $locat != normal && $locat != control_c ]]
then
# CARRY OUT ERROR-COMMANDS GIVEN IN THE CONFIGURATION FILE (EC:)
(( i = 0 ))
while (( i < iec ))
do
(( i = i + 1 ))
printf "\n *** Execution of ERROR-command:\n"
printf " >>> ${err_command[$i]}\n"
eval ${err_command[$i]}
done
[[ $delete_temporary_catalog = true ]] && (cd; rm -rf $tempdir)
printf "\n\n+++ palmrun crashed \n\n"
exit 1
elif [[ $locat != normal ]]
then
[[ $delete_temporary_catalog = true ]] && (cd; rm -rf $tempdir)
printf "\n+++ palmrun killed by \"^C\" \n\n"
exit 2
else
printf "\n --> palmrun finished\n\n"
exit 0
fi' exit
# ACTIONS IN CASE OF TERMINAL-BREAK (CONTROL-C):
trap 'locat=control_c
exit 1
' 2
# READ SHELLSCRIPT-OPTIONS AND REBUILD THE PALMRUN-COMMAND STRING (prc),
# WHICH WILL BE USED TO START RESTART-JOBS
while getopts :a:A:bBc:CFG:i:jkm:M:O:q:r:R:s:t:T:u:U:vVw:W:xX:yY:zZ option
do
case $option in
(a) activation_string_list=$OPTARG; prc="$prc -a'$OPTARG'";;
(A) project_account=$OPTARG; prc="$prc -A'$OPTARG'";;
(b) create_batch_job=true; prc="$prc -b";;
(B) delete_temporary_catalog=false; prc="$prc -B";;
(c) configuration_identifier=$OPTARG; prc="$prc -c$OPTARG";;
(C) restart_run=true; prc="$prc -C";;
(F) create_jobfile_only=true;;
(G) global_revision=$OPTARG; prc="$prc -G'$OPTARG'";;
(i) run_id_number=$OPTARG;;
(j) running_in_batch_mode=true;;
(k) keep_data_from_previous_run=true; prc="$prc -k";;
(m) palmrun_memory=$OPTARG; prc="$prc -m$OPTARG";;
(M) makefile=$OPTARG; prc="$prc -M$OPTARG";;
(O) use_openmp=true; threads_per_task=$OPTARG; prc="$prc -O$OPTARG";;
(q) queue=$OPTARG; prc="$prc -q$OPTARG";;
(r) run_identifier=$OPTARG; prc="$prc -r$OPTARG";;
(R) return_address=$OPTARG;;
(s) source_list=$OPTARG;;
(t) palmrun_cpumax=$OPTARG; prc="$prc -t$OPTARG";;
(T) palmrun_tasks_per_node=$OPTARG; prc="$prc -T$OPTARG";;
(u) remote_username=$OPTARG; prc="$prc -u$OPTARG";;
(U) return_username=$OPTARG; prc="$prc -U$OPTARG";;
(v) silent=true; prc="$prc -v";;
(V) use_existing_sources_folder="-V";;
(w) max_par_io_str=$OPTARG; prc="$prc -w$OPTARG";;
(W) previous_job=$OPTARG;;
(x) do_trace=true;set -x; prc="$prc -x";;
(X) palmrun_cores=$OPTARG; prc="$prc -X$OPTARG";;
(y) ocean_file_appendix=true; prc="$prc -y";;
(Y) run_coupled_model=true; coupled_dist=$OPTARG; prc="$prc -Y'$OPTARG'";;
(z) running_in_test_mode=true;;
(Z) combine_plot_fields=false; prc="$prc -Z";;
(\?) printf "\n +++ unknown option $OPTARG \n"
printf "\n --> type \"$0 ?\" for available options \n"
locat=parameter;exit;;
esac
done
# SKIP GIVEN OPTIONS TO READ POSITIONAL PARAMETER, IF GIVEN
# CURRENTLY ONLY PARAMETER ? (TO OUTPUT A SHORT COMMAND INFO) IS ALLOWED
(( to_shift = $OPTIND - 1 ))
shift $to_shift
# PRINT SHORT DESCRIPTION OF PALMRUN OPTIONS
if [[ "$1" = "?" ]]
then
(printf "\n *** Description of available palmrun options:\n"
printf "\n Option Description Default-Value"
printf "\n -a activation string list \"\" "
printf "\n -A project account number ---"
printf "\n -b batch-job on local machine ---"
printf "\n -B do not delete temporary directory at end ---"
printf "\n -c configuration identifier \"default\" "
printf "\n -F create batch job file only ---"
printf "\n -k keep data from previous run"
printf "\n -m memory demand in MB (batch-jobs) 0 MB"
printf "\n -M Makefile name Makefile"
printf "\n -O threads per openMP task ---"
printf "\n -q queue \"$queue\" "
printf "\n -r run identifier test"
printf "\n -s filenames of routines to be compiled \"\" "
printf "\n must end with .f, .f90, .F, or .c !"
printf "\n use \"..\" for more than one file and wildcards"
printf "\n -s LM compiles all locally modified files"
printf "\n -t allowed cpu-time in seconds (batch) 0"
printf "\n -T tasks per node ---"
printf "\n -u username on remote machine \"\" "
printf "\n -v no prompt for confirmation ---"
printf "\n -V check if SOURCES_FOR_RUN_... exists ---"
printf "\n -w maximum parallel io streams as given by -X"
printf "\n -W name of job to wait for ---"
printf "\n -x tracing of palmrun for debug purposes ---"
printf "\n -X # of processors (on parallel machines) 1"
printf "\n -y add appendix \"_O\" to all local output"
printf "\n files (ocean precursor runs followed by"
printf "\n coupled atmosphere-ocean runs) ---"
printf "\n -Y run coupled model, \"#1 #2\" with"
printf "\n #1 atmosphere and #2 ocean processors \"#/2 #/2\" depending on -X"
printf "\n -Z skip combine_plot_fields at the end of "
printf "\n the simulation ---"
printf "\n "
printf "\n Possible values of positional parameter :"
printf "\n \"?\" - this outline \n\n") | more
exit
elif [[ "$1" != "" ]]
then
printf "\n +++ positional parameter $1 unknown \n"
locat=parameter; exit
fi
# SHORT STARTING MESSAGE
printf "\n*** $version "
printf "\n will be executed. Please wait ..."
# BUILD THE CONFIGURATION-FILE NAME AND THE SOURCES_FOR_RUN-FOLDER NAME
config_file=.palm.config.$configuration_identifier
sources_for_run_catalog=SOURCES_FOR_RUN_${configuration_identifier}_$run_identifier
# CHECK, IF CONFIGURATION FILE EXISTS
if [[ ! -f $config_file ]]
then
printf "\n\n +++ configuration file: "
printf "\n $config_file"
printf "\n does not exist"
locat=connect; exit
fi
# CHECK, IF THE ACTIVATION_STRING_LIST HAS BEEN GIVEN
if [[ "$activation_string_list" = "" ]]
then
printf "\n\n +++ no activation string list given: "
printf "\n please set palmrun option \"-a\" "
locat=palmrun_option; exit
fi
# SET VARIABLE TO ACTIVATE PALM BINARY OUTPUT FOR RESTARTS
if [[ $(echo $activation_string_list | grep -c "restart") != 0 ]]
then
write_binary=true
else
write_binary=false
fi
# SET VARIABLE TO ACTIVATE WRITING OF SVF DATA
if [[ $(echo $activation_string_list | grep -c "svfout") != 0 ]]
then
write_svf=true
else
write_svf=false
fi
# SET VARIABLE TO ACTIVATE READING OF SVF DATA
if [[ $(echo $activation_string_list | grep -c "svfin") != 0 ]]
then
read_svf=true
else
read_svf=false
fi
# READ AND EVALUATE THE CONFIGURATION-FILE
[[ $silent = false ]] && printf "\n\n Reading the configuration file... "
# READ VARIABLE SETTINGS FROM CONFIG FILE LINE BY LINE
while read line
do
# FIRST REPLACE ENVIRONMENT-VARIABLES BY THEIR RESPECTIVE VALUES
eval line=\"$line\"
# INTERPRET THE LINE
if [[ "$(echo $line)" = "" ]]
then
# EMPTY LINE, NO ACTION
continue
elif [[ "$(echo $line | cut -c1)" = "#" ]]
then
# LINE IS A COMMENT LINE
continue
elif [[ "$(echo $line | cut -c1)" = "%" ]]
then
# LINE DEFINES AN ENVIRONMENT-VARIABLE
var=`echo $line | cut -d" " -s -f1 | cut -c2-`
value=`echo $line | cut -d" " -s -f2-`
# VALUE FROM THE CONFIGURATION-FILE IS ASSIGNED TO THE
# ENVIRONMENT-VARIABLE, BUT ONLY IF NO VALUE HAS BEEN ALREADY
# ASSIGNED WITHIN THIS SCRIPT (E.G. BY SCRIPT-OPTIONS).
# NON-ASSIGNED VARIABLES HAVE VALUE "" OR 0 (IN CASE OF INTEGER).
# HENCE THE GENERAL RULE IS: SCRIPT-OPTION OVERWRITES THE
# CONFIGURATION-FILE.
if [[ "$(eval echo \$$var)" = "" || "$(eval echo \$$var)" = "0" ]]
then
eval export $var="\$value"
# TERMINAL OUTPUT OF ENVIRONMENT-VARIABLES, IF TRACEBACK IS SWITCHED on
if [[ $do_trace = true ]]
then
printf "\n*** ENVIRONMENT-VARIABLE $var = $value"
fi
fi
elif [[ "$(echo $line | cut -c1-3)" = "BD:" ]]
then
# LINE DEFINES BATCH-DIRECTIVE
(( ibd = ibd + 1 ))
line=$(echo $line | cut -c4-)
batch_directive[$ibd]="$line"
elif [[ "$(echo $line | cut -c1-4)" = "BDT:" ]]
then
# LINE DEFINES BATCH-DIRECTIVE FOR SENDING BACK THE JOBFILE FROM A
# REMOTE TO A LOCAL HOST
(( ibdt = ibdt + 1 ))
line=$(echo $line | cut -c5-)
batch_directive_transfer[$ibdt]="$line"
elif [[ "$(echo $line | cut -c1-3)" = "EC:" ]]
then
# LINE DEFINES ERROR-COMMAND
(( iec = iec + 1 ))
line=$(echo $line | cut -c4-)
err_command[$iec]="$line"
elif [[ "$(echo $line | cut -c1-3)" = "IC:" ]]
then
# LINE DEFINES INPUT-COMMAND
(( iic = iic + 1 ))
line=$(echo $line | cut -c4-)
in_command[$iic]="$line"
elif [[ "$(echo $line | cut -c1-3)" = "OC:" ]]
then
# LINE DEFINES OUTPUT-COMMAND
(( ioc = ioc + 1 ))
line=$(echo $line | cut -c4-)
out_command[$ioc]="$line"
else
# SKIP ALL OTHER LINES
continue
fi
done < $config_file
# CHECK SETTING OF REQUIRED PARAMETERS
if [[ "$fast_io_catalog" = "" ]]
then
printf "\n\n +++ no fast_io_catalog found in $config_file"
printf "\n Please add line \"fast_io_catalog ...\" to that file."
locat=config_file; exit
fi
if [[ "$compiler_name" = "" ]]
then
printf "\n\n +++ no compiler name found in $config_file"
printf "\n Please add line \"compiler_name ...\" to that file."
locat=config_file; exit
fi
if [[ "$compiler_name_ser" = "" ]]
then
printf "\n\n +++ no compiler name for non-paralle compilation found in $config_file"
printf "\n Please add line \"compiler_name_ser ...\" to that file."
locat=config_file; exit
fi
if [[ "$compiler_options" = "" ]]
then
printf "\n\n +++ no compiler options found in $config_file"
printf "\n Please add line \"compiler_options ...\" to that file."
locat=config_file; exit
fi
if [[ "$execute_command" = "" ]]
then
printf "\n\n +++ no execute command found in $config_file"
printf "\n Please add line \"execute_command ...\" to that file."
locat=config_file; exit
fi
if [[ "$hostfile" != "" ]]
then
if [[ $hostfile != auto && ! -f $hostfile ]]
then
printf "\n\n +++ no hostfile \"$hostfile\" found"
printf "\n Please check line \"hostfile ...\" in $config_file"
locat=config_file; exit
fi
fi
# DETERMINE THE CALL STATUS
if [[ "$return_address" != "" ]]
then
# I AM RUNNING ON A REMOTE HOST, WHICH ALSO MEANS THAT I AM RUNNING IN
# BATCH MODE AND ...
running_on_remote=true
else
# I HAVE BEEN CALLED INTERACTIVELY ON THIS HOST
if [[ "$remote_ip" != "" ]]
then
# I HAVE TO CREATE A BATCH JOB TO RUN PALM ON THE REMOTE HOST
create_remote_batch_job=true
# CHECK THAT THE REMOTE JOBCATALOG HAS BEEN SET
if [[ "$remote_jobcatalog" = "" ]]
then
printf "\n\n +++ no remote jobcatalog found in $config_file"
printf "\n Please add line \"remote_jobcatalog ...\" to that file."
locat=config_file; exit
fi
# CHECK THAT OPTION -b (SUBMITTING BATCH JOB ON LOCAL HOST) HASN'T BEEN SET
if [[ $create_batch_job = true ]]
then
printf "\n\n +++ option -b must not be set because configuration file has been setup"
printf "\n for running jobs on a remote host"
locat=config_file; exit
fi
fi
running_on_remote=false
fi
# SET THE DEFAULT FILE CONNECTION FILE (WHICH IS IN THE REPOSITORY)
fileconnection_file=${source_path}/../SCRIPTS/.palm.iofiles
# CHECK, IF USER PROVIDES OWN FILE CONNECTION FILE
if [[ -f .palm.iofiles ]]
then
# CHECK VERSION MISMATCH
# RESTART RUNS DON'T REQUIRE A CHECK, BECAUSE THEY USE A COPY OF THAT
# FILE WHICH HAS ALREADY BEEN CHECKED WITHIN THE INITAL PALMRUN CALL
if [[ $running_in_batch_mode != true && $restart_run != true ]]
then
if [[ $(head -n1 $fileconnection_file) != $(head -n1 .palm.iofiles) ]]
then
printf "\n\n +++ WARNING: A file connection file has been found in your"
printf "\n working directory, but its revision does not match"
printf "\n the revision of the default (trunk) version."
printf "\n You may need to update your connection file"
printf "\n \"${working_directory}/.palm.iofiles\" !"
fi
fi
fileconnection_file=.palm.iofiles
fi
# CHECK, IF FILE CONNECTION FILE EXISTS
if [[ ! -f $fileconnection_file ]]
then
printf "\n\n +++ file connection file: "
printf "\n $fileconnection_file"
printf "\n does not exist"
locat=connect; exit
fi
# READ AND EVALUATE THE I/O-FILE LIST
[[ $silent = false ]] && printf "\n Reading the I/O files... "
# READ THE FILE CONNECTION FILE LINE BY LINE
while read line
do
# REPLACE REPEATING SPACES BETWEEN THE COLUMNS BY A SINGLE SPACE
# HERE, TR IS USED INSTEAD OF SED TO GUARANTEE MAC COMPATIBILITY
line=`echo "$line" | tr -s " "`
# INTERPRET THE LINE
if [[ "$(echo $line)" = "" ]]
then
# EMPTY LINE, NO ACTION
continue
elif [[ "$(echo $line | cut -c1)" = "#" ]]
then
# LINE IS A COMMENT LINE
true
else
# LINE DEFINES FILE CONNECTION. READ THE FILE ATTRIBUTES.
# s2a: in/out - field
# s2b: action - field (optional)
s1=`echo "$line" | cut -d" " -f1`
s2=`echo "$line" | cut -d" " -s -f2`
if [[ $(echo $s2 | grep -c ":") = 0 ]]
then
s2a=$s2
s2b=""
else
s2a=`echo $s2 | cut -d":" -f1`
s2b=`echo $s2 | cut -d":" -f2`
fi
s3=`echo "$line" | cut -d" " -f3 | sed 's/*/wildcard /g'`
s4=`echo "$line" | cut -d" " -s -f4`
eval s4=\"$s4\" # REPLACE ENVIRONMENT-VARIABLES IN PATH BY THEIR RESPECTIVE VALUES
s5=`echo "$line" | cut -d" " -s -f5`
s6=`echo "$line" | cut -d" " -s -f6`
# STORE FILE CONNECTION, IF ACTIVATED BY ACTIVATION-STRING FROM
# INPUT- OR OUTPUT-LIST.
# VARIABLE S3 MAY CONTAIN A LIST OF ACTIVATION STRINGS (FIELD-SEPERATOR ":").
# IF EXECUTION IS SCHEDULED FOR A REMOTE-MACHINE AND THE FILE IS ONLY
# LOCALLY REQUIRED ON THAT MACHINE (I.E. s2b != tr), THE FILE CONNECTION
# IS NOT CHECKED AND STORED.
IFSALT="$IFS"; IFS="$IFS:" # ADD ":" AS FIELD SEPARATOR
if [[ ( "$s2a" = in || "$s2a" = inopt ) && ! ( $create_remote_batch_job = true && "$s2b" != tr ) ]]
then
found=false
for actual in $activation_string_list
do
for formal in $s3
do
[[ $actual = $formal || "$formal" = "-" ]] && found=true
done
done
if [[ $found = true ]]
then
(( iin = iin + 1 ))
localin_pre[$iin]=$s1; actionin_pre[$iin]=$s2b;
pathin_pre[$iin]=$s4; endin_pre[$iin]=$s5; extin_pre[$iin]=$s6
if [[ "$s2a" = inopt ]]
then
optin_pre[$iin]=yes
else
optin_pre[$iin]=no
fi
# FILES WITH JOB-ATTRIBUTE ARE STORED IN THE SOURCES_FOR_RUN
# FOLDER IF THE JOB IS RUNNING ON A REMOTE HOST
if [[ $running_on_remote = true && "$s2b" = tr ]]
then
pathin_pre[$iin]=${fast_io_catalog}/${sources_for_run_catalog}
fi
# CHECK FOR MULTIPLE FILES, SET A RESPECTIVE FLAG AND REMOVE
# THE WILDCARD FROM THE ENDING
if [[ "${s5: -1}" = "*" ]]
then
if [[ "$s2b" = "di" ]]
then
printf "\n +++ wildcards (*) not allowed with \"di\" file attribute."
printf "\n see file \"$fileconnection_file\", line"
printf "\n$line"
locat=iofiles_file; exit
fi
multin[$iin]=true
string=${endin_pre[$iin]}
endin_pre[$iin]="${string%?}"
else
multin[$iin]=false
fi
fi
elif [[ "$s2a" = out && ! ( $create_remote_batch_job = true ) ]]
then
found=false
for actual in $activation_string_list
do
for formal in $s3
do
[[ $actual = $formal || $formal = wildcard ]] && found=true
done
done
if [[ $found = true ]]
then
(( iout = iout + 1 ))
localout_pre[$iout]=$s1; actionout_pre[$iout]=$s2b
pathout_pre[$iout]=$s4; endout_pre[$iout]=$s5; extout_pre[$iout]=$s6
# CHECK IF WILDCARD IS USED AS ACTIVATION STRING
# IN SUCH CASES, NO WARNING WILL LATER BE OUTPUT IF LOCAL FILES DO NOT EXIST
if [[ $formal = wildcard ]]
then
warnout_pre[$iout]=false
else
warnout_pre[$iout]=true
fi
# CHECK FOR MULTIPLE FILES, SET A RESPECTIVE FLAG AND REMOVE
# THE WILDCARD FROM THE LOCAL FILENAME
if [[ "${s1: -1}" = "*" ]]
then
if [[ "$s2b" = "di" ]]
then
printf "\n +++ wildcards (*) not allowed with \"di\" file attribute."
printf "\n see file \"$fileconnection_file\", line"
printf "\n$line"
locat=iofiles_file; exit
fi
multout[$iout]=true
string=${localout_pre[$iout]}
localout_pre[$iout]="${string%?}"
else
multout[$iout]=false
fi
fi
elif [[ "$s2a" != in && "$s2a" != inopt && "$s2a" != out ]]
then
printf "\n +++ I/O-attribute in file $fileconnection_file has invalid"
printf "\n value \"$s2\". Only \"in\", \"inopt\", and \"out\" are allowed!"
locat=connect; exit
fi
IFS="$IFSALT"
fi
done < $fileconnection_file
# VALUES OF PALMRUN-OPTIONS OVERWRITE THOSE FROM THE CONFIGURATION-FILE
[[ "$palmrun_memory" != "" ]] && memory=$palmrun_memory
[[ "$palmrun_cpumax" != "" ]] && cpumax=$palmrun_cpumax
[[ "$palmrun_cores" != "" ]] && cores=$palmrun_cores
[[ "$max_par_io_str" != "" ]] && maximum_parallel_io_streams=$max_par_io_str
[[ "$palmrun_tasks_per_node" != "" ]] && tasks_per_node=$palmrun_tasks_per_node
# EVALUATE MODEL COUPLING FEATURES (OPTION -Y)
if [[ $run_coupled_model = true ]]
then
cores_atmos=`echo $coupled_dist | cut -d" " -s -f1`
cores_ocean=`echo $coupled_dist | cut -d" " -s -f2`
if (( $cores_ocean + $cores_atmos != $cores ))
then
printf "\n +++ number of processors does not fit to specification by \"-Y\"."
printf "\n PEs (total) : $cores"
printf "\n PEs (atmosphere): $cores_atmos"
printf "\n PEs (ocean) : $cores_ocean"
locat=coupling; exit
fi
fi
# IF I AM IN BATCH MODE, CHECK IF EXECUTABLE AND OTHER REQUIRED FILES
# HAVE BEEN GENERATED BY PALMBUILD AND STORED IN THE SOURCES_FOR_RUN_...
# FOLDER
if [[ $running_in_batch_mode = true ]]
then
if [[ ! -d ${fast_io_catalog}/${sources_for_run_catalog} ]]
then
printf "\n +++ directory ${fast_io_catalog}/${sources_for_run_catalog} is missing"
printf "\n Please check the output of the palmrun-call"
printf "\n that you did on your local host."
locat=SOURCES_FOR_RUN; exit
fi
else
# CREATE THE SOURCES_FOR_RUN_... FOLDER, BUT NOT IF I AM PART OF AN
# AUTOMATIC RESTART RUN
# AUTOMATIC RESTART RUNS JUST ACCESS THE DIRECTORY CREATED BY THE INITIAL RUN
if [[ $restart_run = false ]]
then
# COLLECT FILES TO BE COMPILED IN THE SOURCES_FOR_RUN_... FOLDER ON
# THE LOCAL HOST
if [[ ! -d $source_path ]]
then
printf "\n\n +++ source path \"$source_path\" on local host"
printf "\n \"$(hostname)\" does not exist"
locat=source_path; exit
fi
rm -rf ${base_directory}/${sources_for_run_catalog}
mkdir -p ${base_directory}/${sources_for_run_catalog}
if [[ "$source_list" = LM ]]
then
# DETERMINE MODIFIED FILES OF THE SVN WORKING COPY
source_list=""
cd $source_path
# CHECK, IF TRUNK-DIRECTORY IS UNDER SVN CONTROL
if [[ ! -d ../.svn ]]
then
printf "\n\n +++ source directory"
printf "\n \"$source_path\" "
printf "\n is not under control of \"subversion\"."
printf "\n Please do not use palmrun-option \"-s LM\"\n"
fi
# LIST ALL MODIFIED SOURCE CODE FILES
Filenames=""
svn status > tmp_svnstatus
while read line
do
firstc=`echo $line | cut -c1`
if [[ $firstc = M || $firstc = "?" ]]
then
Name=`echo "$line" | cut -c8-`
extension=`echo $Name | cut -d. -f2`
if [[ "$extension" = f90 || "$extension" = F90 || "$extension" = f || "$extension" = F || "$extension" = c ]]
then
Filenames="$Filenames "$Name
fi
fi
done < tmp_svnstatus
rm -rf tmp_svnstatus
# COPY FILES TO SOURCES_FOR_RUN_...
for filename in $Filenames
do
cp $filename ${base_directory}/${sources_for_run_catalog}
source_list=$source_list"$filename "
done
cd - > /dev/null
# COPY FILES GIVEN BY OPTION -s TO DIRECTORY SOURCES_FOR_RUN_...
elif [[ "$source_list" != "" ]]
then
cd $source_path
for filename in $source_list
do
# SOURCE CODE FILE IS NOT ALLOWED TO INCLUDE PATH
if [[ $(echo $filename | grep -c "/") != 0 ]]
then
printf "\n +++ source code file: $filename"
printf "\n must not contain (\"/\") "
locat=source; exit
fi
if [[ ! -f $filename ]]
then
printf "\n +++ source code file: $filename"
printf "\n does not exist"
locat=source; exit
else
cp $filename ${base_directory}/${sources_for_run_catalog}
fi
done
cd - > /dev/null
fi
# CHECK, IF MAKEFILE EXISTS AND COPY IT TO THE SOURCES_FOR_RUN... DIRECTORY
[[ "$makefile" = "" ]] && makefile=$source_path/Makefile
if [[ ! -f $makefile ]]
then
printf "\n +++ file \"$makefile\" does not exist"
locat=make; exit
else
cp $makefile ${base_directory}/${sources_for_run_catalog}/Makefile
fi
# COPY FILES FROM OPTIONAL SOURCE PATH GIVEN IN THE CONFIGURATION FILE
if [[ "$user_source_path" != "" ]]
then
# DOES THE DIRECTORY EXIST?
if [[ ! -d $user_source_path ]]
then
printf "\n\n *** INFORMATIVE: additional source code directory"
printf "\n \"$user_source_path\" "
printf "\n does not exist or is not a directory."
printf "\n No source code will be used from this directory!\n"
user_source_path=""
if [[ $silent == false ]]
then
sleep 2
fi
else
cd $user_source_path
Names=$(ls -1 *.f90 2>&1)
[[ $(echo $Names | grep -c '*.f90') = 0 ]] && AddFilenames="$Names"
Names=$(ls -1 *.F90 2>&1)
[[ $(echo $Names | grep -c '*.F90') = 0 ]] && AddFilenames="$AddFilenames $Names"
Names=$(ls -1 *.F 2>&1)
[[ $(echo $Names | grep -c '*.F') = 0 ]] && AddFilenames="$AddFilenames $Names"
Names=$(ls -1 *.f 2>&1)
[[ $(echo $Names | grep -c '*.f') = 0 ]] && AddFilenames="$AddFilenames $Names"
Names=$(ls -1 *.c 2>&1)
[[ $(echo $Names | grep -c '*.c') = 0 ]] && AddFilenames="$AddFilenames $Names"
cd - > /dev/null
cd ${base_directory}/${sources_for_run_catalog}
# COPY MAKEFILE IF EXISTING
if [[ -f $user_source_path/Makefile ]]
then
printf "\n\n *** user Makefile from directory"
printf "\n \"$user_source_path\" is used \n"
if [[ $silent == false ]]
then
sleep 1
fi
cp $user_source_path/Makefile .
fi
for filename in $AddFilenames
do
if [[ -f $filename ]]
then
printf "\n +++ source code file \"$filename\" found in additional"
printf "\n source code directory \"$user_source_path\" "
printf "\n but was also given with option \"-s\" which means that it should be taken"
printf "\n from directory \"$source_path\"."
locat=source; exit
fi
cp $user_source_path/$filename .
source_list="$source_list $filename"
# CHECK IF FILE IS CONTAINED IN MAKEFILE
if [[ $(grep -c $filename Makefile) = 0 ]]
then
printf "\n\n +++ user file \"$filename\" "
printf "\n is not listed in Makefile \n"
locat=source; exit
fi
done
cd - > /dev/null
fi
fi
# COPY CONFIGURATION FILES
cp $config_file ${base_directory}/${sources_for_run_catalog}
cp $fileconnection_file ${base_directory}/${sources_for_run_catalog}
# COPY SHELLSCRIPTS
cp ${source_path}/../SCRIPTS/palmrun ${base_directory}/${sources_for_run_catalog}
cp ${source_path}/../SCRIPTS/batch_scp ${base_directory}/${sources_for_run_catalog}
fi
fi
# GET THE GLOBAL REVISION-NUMBER OF THE SVN-REPOSITORY
# (HANDED OVER TO RESTART-RUNS USING OPTION -G)
if [[ "$global_revision" = "" ]]
then
global_revision=`svnversion $source_path 2>/dev/null`
global_revision="Rev: $global_revision"
fi
# IN CASE OF PARALLEL EXECUTION, CHECK SOME SPECIFICATIONS CONCERNING PROCESSOR NUMBERS
if [[ -n $cores ]]
then
# CHECK, IF THE NUMBER OF CORES PER NODE HAS BEEN GIVEN UND IF IT IS AN
# INTEGRAL DIVISOR OF THE TOTAL NUMBER OF CORES GIVEN BY OPTION -X
if [[ $tasks_per_node = 0 ]]
then
if [[ $create_batch_job = true || $create_remote_batch_job = true ]]
then
printf "\n"
printf "\n +++ option \"-T\" (tasks per node) is missing"
printf "\n set -T option or define tasks_per_node in the config file"
locat=tasks_per_node; (( iec = 0 )); exit
else
# DEFAULT FOR INTERACTIVE RUN
tasks_per_node=$cores
fi
fi
if (( cores < tasks_per_node ))
then
printf "\n"
printf "\n +++ tasks per node (-T) cannot exceed total number of cores (-X)"
printf "\n given values: -T $tasks_per_node -X $cores"
locat=tasks_per_node; (( iec = 0 )); exit
fi
(( nodes = cores / ( tasks_per_node * threads_per_task ) ))
(( mpi_tasks = cores / threads_per_task ))
[[ $mpi_tasks = 0 ]] && (( mpi_tasks = 1 ))
(( ii = cores / tasks_per_node ))
(( remaining_cores = cores - ii * tasks_per_node ))
if (( remaining_cores > 0 ))
then
printf "\n"
printf "\n +++ WARNING: tasks per node (option \"-T\") is not an integral"
printf "\n divisor of the total number of cores (option \"-X\")"
printf "\n values of this palmrun-call: \"-T $tasks_per_node\" \"-X $cores\""
printf "\n One of the nodes is filled with $remaining_cores instead of $tasks_per_node tasks"
(( nodes = nodes + 1 ))
fi
fi
# SET DEFAULT VALUE FOR THE MAXIMUM NUMBER OF PARALLEL IO STREAMS
if [[ "$maximum_parallel_io_streams" = "" ]]
then
maximum_parallel_io_streams=$cores
fi
# SET PORT NUMBER OPTION FOR CALLS OF SSH/SCP AND batch_scp SCRIPT
if [[ "$scp_port" != "" ]]
then
PORTOPT="-P $scp_port"
SSH_PORTOPT="-p $scp_port"
fi
# DETERMINE THE SSH-OPTION IN CASE THAT AN SSH-KEY IS EXPLICITLY GIVEN IN THE
# CONFIG-FILE
if [[ "$ssh_key" != "" ]]
then
ssh_key="-i $HOME/.ssh/$ssh_key"
fi
# SET QUEUE, IF NOT GIVEN
if [[ $create_batch_job = true || $create_remote_batch_job = true ]]
then
if [[ $queue = none && "$defaultqueue" = "" ]]
then
printf "\n"
printf "\n +++ no default queue given in configuration file and no queue"
printf "\n given with option -q"
locat=queue; exit
fi
if [[ $queue = none ]]
then
queue=$defaultqueue
fi
fi
# GENERATE FULL FILENAMES OF INPUT-FILES, INCLUDING THEIR PATH
# CHECK, IF INPUT-FILES EXIST, AND DETERMINE HIGHEST CYCLE NUMBER (IF CYCLES EXIST)
(( i = 0 ))
(( nr_of_input_files = 0 ))
while (( i < iin ))
do
(( i = i + 1 ))
# GENERATE PATH AND FULL FILE NAME (then-BRANCH: FIXED FULL NAME IS GIVEN, I.E. THE
# FILE IDENTIFIER IS NOT PART OF THE FILENAME))
if [[ "${actionin_pre[$i]}" = di ]]
then
eval filename=${pathin_pre[$i]}/${endin_pre[$i]}
else
eval filename=${pathin_pre[$i]}/${run_identifier}${endin_pre[$i]}
fi
# CHECK IF FILE EXISTS
if ! ls $filename* 1>/dev/null 2>&1
then
# FILES WITH ATTRIBUTE opt ARE OPTIONAL. NO ABORT, IF THEY DO NOT EXIST.
if [[ "${optin_pre[$i]}" != "yes" ]]
then
printf "\n\n +++ INPUT-file: "
if [[ "${extin_pre[$i]}" = "" || "${extin_pre[$i]}" = " " ]]
then
printf "\n $filename"
else
printf "\n $filename.${extin_pre[$i]}"
fi
printf "\n does not exist\n"
locat=input; exit
else
(( nr_of_input_files = nr_of_input_files + 1 ))
localin[$nr_of_input_files]="${localin_pre[$i]}"
optin[$nr_of_input_files]="${optin_pre[$i]}"
actionin[$nr_of_input_files]="unavailable"
pathin[$nr_of_input_files]="${pathin_pre[$i]}"
endin[$nr_of_input_files]="${endin_pre[$i]}"
extin[$nr_of_input_files]="${extin_pre[$i]}"
fi
else
# FIRST CHECK FOR MULTIPLE NAMES WITH THE SAME BASENAME
# ($run_identifier) AND CREATE A LIST FOR THE DETECTED BASENAME
# ENDINGS
if [[ "${multin[$i]}" = true ]]
then
# DETERMINE THE EXISTING EXTENSIONS FROM THE LIST OF FILES
ls -1 -d ${filename} > filelist 2>/dev/null
ls -1 -d ${filename}.* >> filelist 2>/dev/null
ls -1 -d ${filename}_* >> filelist 2>/dev/null
endings=""
while read line
do
# filename without path (i.e. after the last "/")
basefilename=$(basename ${line})
# check if there is an extension and remove it
ext=${basefilename##*.}
if [[ "$ext" = "${extin_pre[$i]}" ]]
then
basefilename=${basefilename%.*}
fi
# check for an existing cycle number and remove it
cycle=${basefilename##*.}
if [[ $cycle =~ ^-?[0-9]+$ ]]
then
basefilename=${basefilename%.*}
fi
# remove the run_identifier from the beginning
length_run_identifier=${#run_identifier}
ending=${basefilename:${length_run_identifier}}
# remove the ending given in the .iofiles from the beginning
endingstring="${endin_pre[$i]}"
length_ending=${#endingstring}
ending=${ending:${length_ending}}
if [[ "$ending" = "" ]]
then
# standard ending as given in the .iofiles
if [[ $(echo $endings | grep -c DEFAULT) = 0 ]]
then
endings="$endings DEFAULT"
fi
else
# ending must start with "_", otherwise its a different file
if [[ "${ending:0:1}" = "_" ]]
then
if [[ $(echo $endings | grep -c "$ending") = 0 ]]
then
endings="$endings $ending"
fi
fi
fi
done filelist 2>/dev/null
ls -1 -d $filename.* >> filelist 2>/dev/null
while read line
do
# filename without path (i.e. after the last "/")
basefilename=$(basename ${line})
# check if there is an extension
extension=${basefilename##*.}
if [[ "$extension" = "${extin[$nr_of_input_files]}" ]]
then
basefilename=${basefilename%.*}
fi
# check for an existing cycle number
cycle=${basefilename##*.}
if [[ $cycle =~ ^-?[0-9]+$ ]]
then
# NUMBERS WITH LEADING ZEROS ARE INTERPRETED AS OCTAL NUMBERS
# 10# EXPLICITLY SPECIFIES THE NUMBER BASE AS 10
(( icycle = $((10#$cycle)) ))
explicit_cycle_number=true
else
(( icycle = 0 ))
explicit_cycle_number=false
fi
if (( icycle > maxcycle ))
then
(( maxcycle = icycle ))
fi
done /dev/null 2>&1
then
# IF OUTPUT-FILE DOES NOT EXIST CHECK, IF IT CAN BE CREATED
if cat /dev/null > $filename
then
rm $filename
else
# CHECK, IF THE DIRECTORY WHERE FILE SHALL BE COPIED TO EXISTS
# IF IT DOES NOT EXIST, TRY TO CREATE IT
if [[ ! -d $catalogname ]]
then
if mkdir -p $catalogname
then
printf "\n\n *** directory:"
printf "\n $catalogname"
printf "\n was created\n"
else
printf "\n\n +++ OUTPUT-file:"
printf "\n $filename"
printf "\n cannot be created, because directory does not exist"
printf "\n and cannot be created either"
printf "\n"
locat=output ; exit
fi 2>/dev/null
else
printf "\n\n +++ OUTPUT-file:"
printf "\n $filename"
printf "\n cannot be created, although directory exists"
printf "\n"
locat=output ; exit
fi
fi 2>/dev/null
fi
fi
done
# DETERMINE THE NAME OF PALMRUN'S TEMPORARY WORKING DIRECTORY
if [[ $running_in_batch_mode = false ]]
then
run_id_number=$RANDOM
run_id=${run_identifier}.$run_id_number
tempdir=$fast_io_catalog/$run_id
# FOR COMPATIBILITY REASONS WITH OLDER VERSIONS SET JOB_ID
export job_id=$run_id
fi
# CHECK SETTINGS REQUIRED FOR BATCH JOBS
if [[ $create_batch_job = true || $create_remote_batch_job = true ]]
then
# CHECK, IF JOB DIRECTIVES HAVE BEEN GIVEN IN CONFIGURATION FILE
if [[ $ibd = 0 ]]
then
printf "\n"
printf "\n +++ no batch directives found in configuration file"
locat=config_file_batch_directives; (( iec = 0 )); exit
fi
# CHECK IF CPUTIME IS GIVEN FOR JOB
done=false
cputime=$cpumax
while [[ $done = false ]]
do
if (( cputime == 0 ))
then
printf "\n +++ cpu-time is undefined"
printf "\n >>> Please type CPU-time in seconds as INTEGER:"
printf "\n >>> "
read cputime 1>/dev/null 2>&1
else
done=true
fi
done
cpumax=$cputime
# CHECK THE MEMORY DEMAND
done=false
while [[ $done = false ]]
do
if (( memory == 0 ))
then
printf "\n +++ memory demand is undefined"
printf "\n >>> Please type memory in MByte per process as INTEGER:"
printf "\n >>> "
read memory 1>/dev/null 2>&1
else
done=true
fi
done
# IN CASE OF REMOTE-JOBS CHECK, IF A USERNAME FOR THE REMOTE HOST IS GIVEN
if [[ $create_remote_batch_job = true && -z $remote_username ]]
then
while [[ -z $remote_username ]]
do
printf "\n +++ username on remote host with IP \"$remote_ip\" is undefined"
printf "\n >>> Please type username:"
printf "\n >>> "
read remote_username
done
fi
else
if [[ $running_in_batch_mode = false ]]
then
cputime=10000000 # NO LIMT FOR INTERACTIVE RUNS
cpumax=$cputime
else
cputime=$cpumax
fi
fi
# CALCULATE HOURS/MINUTES/SECONDS, E.G. FOR BATCH-DIRECTIVES
(( cpu_hours = cputime / 3600 ))
(( resttime = cputime - cpu_hours * 3600 ))
(( cpu_minutes = resttime / 60 ))
(( cpu_seconds = resttime - cpu_minutes * 60 ))
timestring=${cpu_hours}:${cpu_minutes}:${cpu_seconds}
# OUTPUT OF THE PALMRUN-HEADER
calltime=$(date)
printf "\n"
printf "#------------------------------------------------------------------------# \n"
printf "| %-35s%35s | \n" "$version" "$calltime"
printf "| %-35s%35s | \n" "PALM code $global_revision" " "
printf "| | \n"
column1="called on:"; column2=$(hostname)
printf "| %-25s%-45s | \n" "$column1" "$column2"
if [[ $create_remote_batch_job = true ]]
then
column1="execution on:"; column2="$configuration_identifier (username: $remote_username)"
else
if [[ $running_on_remote = true ]]
then
column1="config. identifier:"; column2="$configuration_identifier (execute on IP: $remote_ip)"
else
column1="config. identifier:"; column2="$configuration_identifier (execute on IP: $local_ip)"
fi
fi
printf "| %-25s%-45s | \n" "$column1" "$column2"
column1="running in:"
if [[ $running_in_batch_mode = true ]]
then
column2="batch job mode"
else
if [[ $create_batch_job = true || $create_remote_batch_job = true ]]
then
column2="job creation mode"
else
column2="interactive run mode"
fi
fi
printf "| %-25s%-45s | \n" "$column1" "$column2"
if [[ $running_in_batch_mode = true || $create_batch_job = true || $create_remote_batch_job = true ]]
then
if [[ "$project_account" != "" ]]
then
column1="project account number:"
column2="$project_account"
printf "| %-25s%-45s | \n" "$column1" "$column2"
fi
fi
if [[ -n $cores ]]
then
if [[ $run_coupled_model = false ]]
then
column1="number of cores:"; column2=$cores
else
column1="number of cores:"; column2="$cores (atmosphere: $cores_atmos, ocean: $cores_ocean)"
fi
printf "| %-25s%-45s | \n" "$column1" "$column2"
fi
if [[ -n $tasks_per_node ]]
then
column1="tasks per node:"; column2="$tasks_per_node (number of nodes: $nodes)"
printf "| %-25s%-45s | \n" "$column1" "$column2"
if (( remaining_cores > 0 ))
then
column1=" "; column2="one of the nodes only filled with $remaining_cores tasks"
printf "| %-25s%-45s | \n" "$column1" "$column2"
fi
fi
if [[ $maximum_parallel_io_streams != $cores ]]
then
column1="max par io streams:"; column2="$maximum_parallel_io_streams"
printf "| %-25s%-45s | \n" "$column1" "$column2"
fi
if [[ $use_openmp = true ]]
then
column1="threads per task:"; column2="$threads_per_task"
printf "| %-25s%-45s | \n" "$column1" "$column2"
fi
if [[ $create_batch_job = true || $create_remote_batch_job = true || $running_in_batch_mode = true ]]
then
column1="memory demand / PE":; column2="$memory MB"
printf "| %-25s%-45s | \n" "$column1" "$column2"
column1="job cpu time (h:m:s):"; column2="$timestring"
printf "| %-25s%-45s | \n" "$column1" "$column2"
fi
printf "| | \n"
if [[ "$source_list" != "" ]]
then
if [[ "$make_options" != "" ]]
then
column1="make options:"; column2=$(echo "$make_options" | cut -c-45)
printf "| %-25s%-45s | \n" "$column1" "$column2"
line=$(echo "$make_options" | cut -c46-)
while [[ "$line" != "" ]]
do
column1=""
column2=$(echo "$line" | cut -c-45)
printf "| %-25s%-45s | \n" "$column1" "$column2"
line=$(echo "$line" | cut -c46-)
done
fi
fi
column1="cpp directives:"; column2=$(echo "$cpp_options" | cut -c-45)
printf "| %-25s%-45s | \n" "$column1" "$column2"
line=$(echo "$cpp_options" | cut -c46-)
while [[ "$line" != "" ]]
do
column1=""
column2=$(echo "$line" | cut -c-45)
printf "| %-25s%-45s | \n" "$column1" "$column2"
line=$(echo "$line" | cut -c46-)
done
column1="compiler options:"; column2=$(echo "$compiler_options" | cut -c-45)
printf "| %-25s%-45s | \n" "$column1" "$column2"
line=$(echo "$compiler_options" | cut -c46-)
while [[ "$line" != "" ]]
do
column1=""
column2=$(echo "$line" | cut -c-45)
printf "| %-25s%-45s | \n" "$column1" "$column2"
line=$(echo "$line" | cut -c46-)
done
column1="linker options:"; column2=$(echo "$linker_options" | cut -c-45)
printf "| %-25s%-45s | \n" "$column1" "$column2"
line=$(echo "$linker_options" | cut -c46-)
while [[ "$line" != "" ]]
do
column1=""
column2=$(echo "$line" | cut -c-45)
printf "| %-25s%-45s | \n" "$column1" "$column2"
line=$(echo "$line" | cut -c46-)
done
if [[ "$login_init_cmd" != "" ]]
then
column1="login init commands:"; column2=$(echo "$login_init_cmd" | cut -c-45)
printf "| %-25s%-45s | \n" "$column1" "$column2"
line=$(echo "$login_init_cmd" | cut -c46-)
while [[ "$line" != "" ]]
do
column1=""
column2=$(echo "$line" | cut -c-45)
printf "| %-25s%-45s | \n" "$column1" "$column2"
line=$(echo "$line" | cut -c46-)
done
fi
if [[ "$module_commands" != "" ]]
then
column1="module commands:"; column2=$(echo "$module_commands" | cut -c-45)
printf "| %-25s%-45s | \n" "$column1" "$column2"
line=$(echo "$module_commands" | cut -c46-)
while [[ "$line" != "" ]]
do
column1=""
column2=$(echo "$line" | cut -c-45)
printf "| %-25s%-45s | \n" "$column1" "$column2"
line=$(echo "$line" | cut -c46-)
done
fi
printf "| | \n"
column1="run identifier:"; column2=$run_identifier
printf "| %-25s%-45s | \n" "$column1" "$column2"
column1="activation string list:"; column2=$(echo $activation_string_list)
printf "| %-25s%-45s | \n" "$column1" "$column2"
if [[ "$ocean_file_appendix" = true ]]
then
printf "| %-35s%-35s | \n" "suffix \"_O\" is added to local files" " "
fi
if [[ "$source_list" != "" ]]
then
printf "| | \n"
printf "| Files to be compiled: | \n"
line=$source_list
while [[ "$line" != "" ]]
do
linestart=$(echo $line | cut -c-70)
printf "| %-70s | \n" "$linestart"
line=$(echo "$line" | cut -c71-)
done
fi
printf "#------------------------------------------------------------------------#"
# OUTPUT OF FILE CONNECTIONS IN CASE OF TRACEBACK
if [[ $do_trace = true ]]
then
(( i = 0 ))
while (( i < nr_of_input_files ))
do
(( i = i + 1 ))
if (( i == 1 ))
then
printf "\n\n >>> INPUT-file assignments:\n"
fi
printf "\n ${localin[$i]} : ${absnamein[$i]}"
done
(( i = 0 ))
while (( i < iout ))
do
(( i = i + 1 ))
if (( i == 1 ))
then
printf "\n\n >>> OUTPUT-file assignments:\n"
fi
printf "\n ${localout[$i]} : ${pathout[$i]}"
done
(( i = 0 ))
while (( i < iic ))
do
(( i = i + 1 ))
if (( i == 1 ))
then
printf "\n\n >>> INPUT-commands:\n"
fi
printf "\n ${in_command[$i]}"
done
(( i = 0 ))
while (( i < ioc ))
do
(( i = i + 1 ))
if (( i == 1 ))
then
printf "\n\n >>> OUTPUT-commands:\n"
fi
printf "\n ${out_command[$i]}"
done
fi
# QUERY FOR CONTINUE
if [[ $silent = false && $running_in_batch_mode = false ]]
then
antwort=dummy
printf "\n\n"
printf " >>> everything o.k. (y/n) ? "
while read antwort
do
if [[ "$antwort" != y && "$antwort" != Y && "$antwort" != n && "$antwort" != N ]]
then
printf " >>> everything o.k. (y/n) ? "
else
break
fi
done
if [[ $antwort = n || $antwort = N ]]
then
locat=user_abort; (( iec = 0 )); exit
fi
if [[ $create_batch_job = true || $create_remote_batch_job = true ]]
then
printf "\n *** batch-job will be created and submitted"
else
printf "\n *** PALMRUN will now continue to execute on this machine"
fi
fi
# PROVIDE FILES TO EXECUTE PALM AND CREATE THE EXECUTABLE
if [[ $restart_run = false && $running_in_batch_mode = false ]]
then
if [[ $create_batch_job = true || $create_remote_batch_job = true ]]
then
printf "\n\n *** creating executable and other sources for the remote host\n"
else
printf "\n\n *** creating executable and other sources for the local host\n"
fi
# FIRST CHECK, IF A MAKE DEPOSITORY EXISTS, AND IF NOT, ASK THE USER IF
# IT SHALL BE CREATED
ask_for_make_depository=false
if [[ $create_remote_batch_job = true ]]
then
line=`grep %base_directory $config_file`
make_depository=`echo $line | cut -d" " -s -f2`/MAKE_DEPOSITORY_${configuration_identifier}
ssh -q $ssh_key ${remote_username}@${remote_ip} "[[ ! -d ${make_depository} ]] && echo depository not found" 2>&1 | tee ${configuration_identifier}_last_make_protokoll
if [[ $(grep -c "depository not found" ${configuration_identifier}_last_make_protokoll) != 0 ]]
then
printf "\n\n +++ make depository \"${make_depository}\""
printf "\n on remote host not found!"
ask_for_make_depository=true
fi
rm ${configuration_identifier}_last_make_protokoll
else
# CHECK FOR MAKE_DEPOSITORY ON THE LOCAL HOST
make_depository=${base_directory}/MAKE_DEPOSITORY_${configuration_identifier}
if [[ ! -d ${make_depository} ]]
then
printf "\n\n +++ make depository \"${make_depository}\""
printf "\n on local host not found!"
ask_for_make_depository=true
fi
fi
if [[ $ask_for_make_depository = true ]]
then
antwort=dummy
printf "\n\n"
printf " >>> Create a new one (y/n) ? "
while read antwort
do
if [[ "$antwort" != y && "$antwort" != Y && "$antwort" != n && "$antwort" != N ]]
then
printf " >>> Create a new one (y/n) ? "
else
break
fi
done
if [[ $antwort = n || $antwort = N ]]
then
locat=user_abort; (( iec = 0 )); exit
fi
if [[ $do_trace = true ]]
then
palmbuild -c $configuration_identifier
else
palmbuild -v -c $configuration_identifier
fi
if [[ ${PIPESTATUS[0]} != 0 ]]
then
# ABORT IN CASE OF COMPILATION PROBLEMS
printf "\n +++ error while compiling for the MAKE_DEPOSITORY"
locat=make_depository
exit
else
echo " *** now continue with creating executable and other sources"
fi
fi
# NOW CREATE THE SOURCES_FOR_RUN FOLDER
palmbuild -v $use_existing_sources_folder -c $configuration_identifier -r $run_identifier
if [[ ${PIPESTATUS[0]} != 0 ]]
then
# ABORT IN CASE OF COMPILATION PROBLEMS
printf "\n +++ error while creating executable and/or other sources"
locat=execution
rm -rf ${base_directory}/${sources_for_run_catalog}
exit
else
printf " *** executable and other sources created\n"
rm -rf ${base_directory}/${sources_for_run_catalog}
fi
fi
# WHEN CREATING A REMOTE BATCH JOB, THOSE INPUT FILES WITH TRANSFER-ATTRIBUT
# WILL BE COPIED TO THE REMOTE HOST
if [[ $create_remote_batch_job = true ]]
then
(( i = 0 ))
while (( i < nr_of_input_files ))
do
(( i = i + 1 ))
if [[ "${actionin[$i]}" = tr ]]
then
eval inputfile=${pathin[$i]}/${frelin[$i]}
scp -q $ssh_key $PORTOPT $inputfile ${remote_username}@${remote_ip}:${fast_io_catalog}/${sources_for_run_catalog}/${frelin[$i]}
fi
done
if (( i > 0 ))
then
printf "\n\n *** input files have been copied to the remote host\n"
fi
fi
# NOW PERFORM THOSE ACTIONS REQUIRED TO EXECUTE THE PROGRAM (PALM) ON THIS MACHINE
# (COMPILING/LINKING, EXECUTING, COPYING I/O FILES)
if [[ $create_batch_job = false && $create_remote_batch_job = false ]]
then
# CHANGE TO THE TEMPORARY WORKING DIRECTORY
if [[ $running_in_batch_mode = false ]]
then
# CREATE THE DIRECTORY
mkdir -p $tempdir
if [[ $? != 0 ]]
then
printf "\n +++ temporary working directory cannot be created."
printf "\n Check setting of variable fast_io_catalog in your config file."
locat=execution
exit
fi
chmod go+rx $tempdir
cd $tempdir
printf "\n *** changed to temporary directory: $tempdir"
else
# IN BATCH MODE PALMRUN IS CALLED FROM TEMPDIR
printf "\n *** running in temporary directory: $tempdir"
fi
# PROVIDE THE INPUT FILES
# LOOP OVER ALL ACTIVATED FILES (LISTED IN THE CONFIGURATION FILE)
optional_files_missing=false
(( i = 0 ))
while (( i < nr_of_input_files ))
do
(( i = i + 1 ))
if (( i == 1 ))
then
printf "\n\n *** providing INPUT-files:\n$dashes"
fi
# SKIP OPTIONAL FILES, IF THEY DO NOT EXIST
if [[ "${actionin[$i]}" = unavailable ]]
then
optional_files_missing=true
continue
fi
# CHECK FOR SINGLE FILE (SERIAL RUN) OR DIRECTORY (ONE FILE PER CORE FOR PARELLEL EXECUTION)
files_for_cores=false; filetype=file
if [[ "${actionin[$i]}" = pe && -n $cores ]]
then
files_for_cores=true; filetype=files
actionin[$i]=""
elif [[ "${actionin[$i]}" = pe && ! -n $cores ]]
then
actionin[$i]=""
elif [[ "${actionin[$i]}" = lnpe && -n $cores ]]
then
files_for_cores=true; filetype=files
actionin[$i]="ln"
elif [[ "${actionin[$i]}" = lnpe && ! -n $cores ]]
then
actionin[$i]="ln"
fi
if [[ $files_for_cores = true ]]
then
printf "\n >>> INPUT: ${absnamein[$i]}/.... to ${localin[$i]}"
else
printf "\n >>> INPUT: ${absnamein[$i]} to ${localin[$i]}"
fi
# INPUT-FILES TO BE LINKED
if [[ "${actionin[$i]}" = ln ]]
then
printf "\n $filetype will be linked"
if [[ $files_for_cores = false ]]
then
if [[ -f "${absnamein[$i]}" ]]
then
ln ${absnamein[$i]} ${localin[$i]}
got_tmp[$i]=true
fi
else
if [[ -d "${absnamein[$i]}" ]]
then
mkdir -p ${localin[$i]}
cd ${absnamein[$i]}
for file in $(ls *)
do
ln $file $tempdir/${localin[$i]}
done >|/dev/null 2>&1
cd $tempdir
fi
# IF "ln -f" HAS FAILED DO A NORMAL COPY "cp -r"
if [[ ! -f "${localin[$i]}/_000000" ]]
then
printf "\n --- WARNING: ln failed, using cp instead (might be time consuming...)"
cp -r ${absnamein[$i]}/* ${localin[$i]}
fi
got_tmp[$i]=true
fi
fi
# FILE IS STORED IN THE RESPECTIVE DIRECTORY GIVEN IN THE CONFIGURATION FILE
if [[ "${actionin[$i]}" = "" || "${actionin[$i]}" = "di" || "${actionin[$i]}" = "tr" || "${actionin[$i]}" = "npe" ]]
then
if [[ "${actionin[$i]}" = "npe" && -n $cores ]]
then
# FILE COPIES ARE PROVIDED FOR ALL CORES
# EACH FILE GETS A UNIQUE FILENAME WITH A FOUR DIGIT NUMBER
printf "\n file will be provided for $cores processors"
mkdir -p ${localin[$i]}
ival=$cores
(( ii = 0 ))
while (( ii <= ival-1 ))
do
if (( ii < 10 ))
then
cp ${absnamein[$i]} ${localin[$i]}/_000$ii
elif (( ii < 100 ))
then
cp ${absnamein[$i]} ${localin[$i]}/_00$ii
elif (( ii < 1000 ))
then
cp ${absnamein[$i]} ${localin[$i]}/_0$ii
else
cp ${absnamein[$i]} ${localin[$i]}/_$ii
fi
(( ii = ii + 1 ))
done
else
if [[ $files_for_cores = true ]]
then
# PROVIDE FILES FOR EACH CORE
# FIRST CREATE THE LOCAL DIRECTORY, THEN COPY FILES
# FROM THE PERMANENT DIRECTORY BY LINKING THEM TO THE LOCAL ONE
printf "\n providing $cores files for the respective cores"
mkdir -p ${localin[$i]}
if [[ $link_local_input = true ]]
then
printf " files will be linked\n"
cd ${absnamein[$i]}
for file in $(ls *)
do
ln -f $file ${localin[$i]}
done
cd $tempdir
fi
# IF "ln -f" FAILED OR IF "$link_local_input = false" DO A NORMAL "cp -r"
if [[ ! -f "${localin[$i]}/_000000" ]]
then
if [[ $link_local_input = true ]]
then
printf "\n --- WARNING: ln failed, using cp instead (might be time consuming...)"
fi
cp -r ${absnamein[$i]}/* ${localin[$i]}
fi
else
# PROVIDE FILE FOR RUNS ON A SINGLE CORE
if [[ $link_local_input = true ]]
then
printf " file will be linked\n"
ln -f ${absnamein[$i]} ${localin[$i]}
fi
# IF "ln -f" FAILS OR IF "$link_local_input = false" DO A NORMAL "cp"
if [[ ! -f "${localin[$i]}" ]]
then
if [[ $link_local_input = true ]]
then
printf "\n --- WARNING: ln failed, using cp instead (might be time consuming...)"
fi
if [[ $running_on_remote = true && "${actionin[$i]}" = tr ]]
then
mv ${absnamein[$i]} ${localin[$i]}
else
cp ${absnamein[$i]} ${localin[$i]}
fi
fi
fi
fi
fi
done
if (( i != 0 ))
then
if [[ $optional_files_missing = true ]]
then
printf "\n *** INFORMATIVE: some optional INPUT-files are not present"
fi
printf "\n$dashes\n *** all INPUT-files provided \n"
fi
# NOW COPY FILES (*.f90, *.o, config files, etc.) FROM SOURCES_FOR_RUN_... TO THE TEMPORARY
# WORKING DIRECTORY
cp ${fast_io_catalog}/${sources_for_run_catalog}/{*,.[!.]*} $tempdir
# EXECUTE INPUT-COMMANDS GIVEN IN THE CONFIGURATION FILE
(( i = 0 ))
while (( i < iic ))
do
(( i = i + 1 ))
if (( i == 1 ))
then
printf "\n\n *** execution of INPUT-commands:\n$dashes"
fi
printf "\n >>> ${in_command[$i]}"
eval ${in_command[$i]}
if (( i == iic ))
then
printf "\n$dashes\n"
fi
done
# CHECK IF THE PROGRESS BAR NEEDS TO BE DISABLED
if [[ $running_in_batch_mode = true || $running_in_test_mode = true ]]
then
progress_bar_disabled=true
else
progress_bar_disabled=false
fi
# CREATE THE NAMELIST-FILE WITH VALUES OF ENVIRONMENT-VARIABLES REQUIRED BY PALM
# (FILE ENVPAR WILL BE READ BY PALM)
cat > ENVPAR << EOF
&envpar run_identifier = '$run_identifier', host = '$configuration_identifier',
write_svf = .${write_svf}., write_binary = .${write_binary}.,
read_svf = .${read_svf}., tasks_per_node = $tasks_per_node,
maximum_parallel_io_streams = $maximum_parallel_io_streams,
maximum_cpu_time_allowed = ${cpumax}.,
revision = '$global_revision',
progress_bar_disabled = .${progress_bar_disabled}. /
EOF
# STARTING THE EXECUTABLE
printf "\n\n *** execution starts in directory\n \"`pwd`\"\n$dashes\n"
PATH=$PATH:$tempdir
# REPLACE PARAMETERS IN THE EXECUTION COMMAND WITH REAL VALUES
line=`echo "${execute_command}" | sed 's/{{/$/g' | sed 's/}}//g'`
line2=`echo "${execute_command}" | sed 's/{{mpi_tasks}}/1/g' | sed 's/{{tasks_per_node}}/1/g' | sed 's/palm/combine_plot_fields.x/g'`
eval line=\"$line\"
execute_command="$line"
# EXECUTION COMMAND FOR COMBINE_PLOT_FIELDS
if [[ "$execute_command_for_combine" = "" ]]
then
eval line2=\"$line2\"
execute_command_for_combine="$line2"
fi
# PROVIDE A HOSTFILE, IF REQUIRED
if [[ "$hostfile" != "" ]]
then
if [[ $hostfile = auto ]]
then
# CREATE A NEW HOSTFILE
(( ii = 1 ))
while (( ii <= cores / threads_per_task ))
do
echo $(hostname) >> hostfile
(( ii = ii + 1 ))
done
if (( cores / threads_per_task == 0 ))
then
echo $(hostname) >> hostfile
fi
else
cp $hostfile hostfile
fi
eval line=\"`head -n $ii hostfile`\"
printf "\n *** running on: $line"
fi
# SET THE NUMBER OF OPENMP-THREADS
if [[ $use_openmp = true ]]
then
export OMP_NUM_THREADS=$threads_per_task
printf "\n *** number of OpenMP threads per MPI-task: $OMP_NUM_THREADS"
else
export OMP_NUM_THREADS=1
fi
# PROVIDE DATA FOR ATMOSPHERE OCEAN COUPLING
if [[ $run_coupled_model = false ]]
then
if [[ "$ocean_file_appendix" = true ]]
then
echo "precursor_ocean" > coupling_steering
else
echo "precursor_atmos" > coupling_steering
fi
else
(( iia = $cores_atmos / $threads_per_task ))
(( iio = $cores_ocean / $threads_per_task ))
printf "\n coupled run ($iia atmosphere, $iio ocean)"
printf "\n\n"
echo "coupled_run $iia $iio" > coupling_steering
fi
printf "\n *** execute command:"
printf "\n \"$execute_command\" \n\n"
if [[ $progress_bar_disabled = true ]]
then
$execute_command < coupling_steering &> >(grep -v --line-buffered -e '^STOP 1$' -e '^1$' &> >(tee STDOUT) )
exit_code=${PIPESTATUS[0]}
else
$execute_command < coupling_steering &> >(tee STDOUT)
exit_code=${PIPESTATUS[0]}
fi
if [[ ${exit_code} != 0 ]]
then
# ABORT IN CASE OF RUNTIME ERRORS
printf "\n +++ runtime error occured"
locat=execution
exit
else
printf "\n$dashes\n *** execution finished \n"
fi
# CALL OF combine_plot_fields IN ORDER TO MERGE SINGLE FILES WRITTEN
# BY EACH CORE INTO ONE FILE
if [[ ! -f combine_plot_fields.x ]]
then
printf "\n\n\n +++ WARNING: no combine_plot_fields found"
printf "\n 2d- and/or 3d-data may be incomplete!"
printf "\n Your previous palmbuild may have failed. Please check.\n"
elif [[ "$combine_plot_fields" == true ]]
then
printf "\n\n\n *** post-processing: now executing \"$execute_command_for_combine\" ..."
$execute_command_for_combine
else
# TEMPORARY SOLUTION TO SKIP combine_plot_fields. THIS IS REQUIRED IN CASE OF HUGE AMOUNT OF
# DATA OUTPUT
printf "\n\n\n *** post-processing: skipping combine_plot_fields (-Z option set) ..."
fi
# EXECUTE OUTPUT-COMMANDS GIVEN IN THE CONFIGURATION FILE
(( i = 0 ))
while (( i < ioc ))
do
(( i = i + 1 ))
if (( i == 1 ))
then
printf "\n\n *** execution of OUTPUT-commands:\n$dashes"
fi
# REPLACE PARAMETERS IN THE OUTPUT COMMAND WITH REAL VALUES
out_command[$i]=`echo "${out_command[$i]}" | sed 's/{{/$/g' | sed 's/}}//g'`
printf "\n >>> ${out_command[$i]}"
eval ${out_command[$i]}
if (( i == ioc ))
then
printf "\n$dashes\n"
fi
done
# IN A FIRST PASS, ADD ADDITIONAL OUTPUT FILE CONNECTIONS IN CASE OF
# WILDCARDS
(( i = 0 ))
(( nr_of_output_files = 0 ))
while (( i < iout ))
do
(( i = i + 1 ))
# FIRST CHECK FOR MULTIPLE NAMES WITH THE SAME LOCAL NAME AND
# CREATE A LIST FOR THE DETECTED ENDINGS
if [[ "${multout[$i]}" = true ]]
then
# DETERMINE THE EXISTING EXTENSIONS FROM THE LIST OF FILES
ls -1 -d ${localout_pre[$i]} > filelist 2>/dev/null
ls -1 -d ${localout_pre[$i]}_* >> filelist 2>/dev/null
endings="DEFAULT"
while read line
do
# remove the local name from the beginning
localnamestring="${localout_pre[$i]}"
length_localname=${#localnamestring}
ending=${line:${length_localname}}
if [[ "$ending" != "" ]]
then
endings="$endings $ending"
fi
done filelist 2>/dev/null
ls -1 -d $filename.* >> filelist 2>/dev/null
(( maxcycle = 0 ))
while read line
do
# filename without path (i.e. after the last "/")
basefilename=$(basename ${line})
# check if there is an extension
extension=${basefilename##*.}
if [[ "$extension" = "${extout[$i]}" ]]
then
basefilename=${basefilename%.*}
fi
# check for an existing cycle number
cycle=${basefilename##*.}
if [[ $cycle =~ ^-?[0-9]+$ ]]
then
# NUMBERS WITH LEADING ZEROS ARE INTERPRETED AS OCTAL NUMBERS
# 10# EXPLICITLY SPECIFIES THE NUMBER BASE AS 10
(( icycle = $((10#$cycle)) + 1 ))
else
(( icycle = 1 ))
fi
if (( icycle > maxcycle ))
then
(( maxcycle = icycle ))
fi
done 0 ))
then
(( maxcycle = maxcycle - 1 ))
fi
fi
(( cycnum[$i] = maxcycle ))
pathout[$i]=$filename
# ADD CYCLE NUMBER TO FILENAME
# IN APPEND MODE, FILES KEEP THEIR CURRENT CYCLE NUMBER
if [[ "${actionout[$i]}" != "a" ]]
then
# SET RUN NUMBER AS CYCLE NUMBER, IF THERE IS NOT A CONFLICT
# WITH AN EXISTING CYCLE NUMBER
if (( run_number >= cycnum[$i] ))
then
(( cycnum[$i] = run_number ))
else
if (( run_number > 0 ))
then
printf "\n --- INFORMATIVE: The following file cannot get a unified cycle number"
fi
fi
fi
cyclestring=`printf "%03d" ${cycnum[$i]}`
pathout[$i]=${pathout[$i]}.$cyclestring
fi
# CHECK FOR SINGLE FILE (SERIAL RUN) OR DIRECTORY (ONE FILE PER CORE FOR PARELLEL EXECUTION)
files_for_cores=false; filetype=file
link_local_output=false
if [[ "${actionout[$i]}" = pe && -n $cores ]]
then
files_for_cores=true; filetype=directory
actionout[$i]=""
elif [[ "${actionout[$i]}" = pe && ! -n $cores ]]
then
actionout[$i]=""
elif [[ "${actionout[$i]}" = lnpe && -n $cores ]]
then
files_for_cores=true; filetype=directory
link_local_output=true
actionout[$i]=""
elif [[ "${actionout[$i]}" = lnpe && ! -n $cores ]]
then
link_local_output
actionout[$i]=""
elif [[ "${actionout[$i]}" = trpe && -n $cores ]]
then
files_for_cores=true; filetype=directory
actionout[$i]="tr"
elif [[ "${actionout[$i]}" = trpe && ! -n $cores ]]
then
actionout[$i]="tr"
fi
if [[ ! -f ${localout[$i]} && $files_for_cores = false ]]
then
if [[ ${warnout[$i]} = true ]]
then
printf "\n +++ temporary OUTPUT-file ${localout[$i]} does not exist\n"
fi
elif [[ ! -d ${localout[$i]} && $files_for_cores = true ]]
then
if [[ ${warnout[$i]} = true ]]
then
printf "\n +++ temporary OUTPUT-file ${localout[$i]}/.... does not exist\n"
fi
else
# COPY VIA SCP TO LOCAL HOST (ALWAYS IN BINARY MODE USING batch_scp option -m)
# IF TARGET DIRECTORY DOES NOT EXISTS, TRY TO CREATE IT
if [[ "${actionout[$i]}" = tr || "${actionout[$i]}" = tra ]]
then
if [[ $running_on_remote = true ]]
then
# SET OPTIONS FOR TRANSFER
if [[ "${actionout[$i]}" = tr ]]
then
if [[ $files_for_cores = false ]]
then
catalog_option=""
catalog_string=""
else
catalog_option="-c"
catalog_string="/"
fi
append_option=""
append_string=""
else
append_option="-A"
append_string="append"
fi
transfer_failed=false
printf "\n >>> OUTPUT: ${localout[$i]}$catalog_string $append_string by SCP to"
printf "\n ${pathout[$i]}/${configuration_identifier}_${run_identifier}${endout[$i]}$catalog_string\n"
# TRANSFER VIA SCP
if [[ "$remote_loginnode" != "" ]]
then
ssh -q $remote_username@$remote_loginnode "cd $tempdir; ${fast_io_catalog}/${sources_for_run_catalog}/batch_scp $PORTOPT $catalog_option $append_option -b -m $usecycle_option -u $local_username $return_address ${localout[$i]} \"${pathout[$i]}\" ${configuration_identifier}_${run_identifier}${endout[$i]} ${extout[$i]}"
else
batch_scp $PORTOPT $catalog_option $append_option -b -m $usecycle_option -u $local_username $return_address ${localout[$i]} "${pathout[$i]}" ${configuration_identifier}_${run_identifier}${endout[$i]} ${extout[$i]}
fi
[[ ${PIPESTATUS[0]} != 0 ]] && transfer_failed=true
# IF TRANSFER FAILED, CREATE BACKUP COPY ON THIS MACHINE
if [[ $transfer_failed = true ]]
then
printf " +++ transfer failed. Trying to save a copy on this host under:\n"
printf " ${pathout[$i]}/${configuration_identifier}_${run_identifier}${endout[$i]}_$run_id_number\n"
# FIRST CHECK, IF DIRECTORY EXISTS, AND CREATE IT, IF NECESSARY
eval local_catalog=${pathout[$i]}
if [[ ! -d $local_catalog ]]
then
printf " *** local directory does not exist. Trying to create:\n"
printf " $local_catalog \n"
mkdir -p $local_catalog
fi
eval cp ${localout[$i]} ${pathout[$i]}/${configuration_identifier}_${run_identifier}${endout[$i]}_$run_id_number
transfer_problems=true
fi
else
# UNSET actionout. DUE TO THIS SETTING, FILE WILL LATER JUST
# BE COPIED OR APPENDED ON THIS MACHINE
if [[ "${actionout[$i]}" = tr ]]
then
actionout[$i]=""
else
actionout[$i]="a"
fi
fi
fi
# APPEND ON THIS MACHINE
if [[ "${actionout[$i]}" = "a" ]]
then
if [[ "${extout[$i]}" != " " && "${extout[$i]}" != "" ]]
then
printf "\n >>> OUTPUT: ${localout[$i]} append to"
printf "\n ${pathout[$i]}.${extout[$i]}\n"
cat ${localout[$i]} >> ${pathout[$i]}.${extout[$i]}
else
printf "\n >>> OUTPUT: ${localout[$i]} append to"
printf "\n ${pathout[$i]}\n"
cat ${localout[$i]} >> ${pathout[$i]}
fi
fi
# COPY ON THIS MACHINE
# COPY HAS TO BE USED, BECAUSE MOVE DOES NOT WORK IF FILE-ORIGIN AND TARGET ARE
# ON DIFFERENT FILE-SYSTEMS
if [[ "${actionout[$i]}" = "" && $files_for_cores = false ]]
then
# COPY IN CASE OF RUNS ON SINGLE CORES
if [[ "${extout[$i]}" != " " && "${extout[$i]}" != "" ]]
then
printf "\n >>> OUTPUT: ${localout[$i]} to"
printf "\n ${pathout[$i]}.${extout[$i]}\n"
if [[ $link_local_output = true ]]
then
printf " file will be linked\n"
ln -f ${localout[$i]} ${pathout[$i]}.${extout[$i]}
fi
# If "ln -f" fails of if "$link_local_output = false" do a normal "cp"
if [[ ! -f "${pathout[$i]}.${extout[$i]}" ]]
then
if [[ $link_local_output = true ]]
then
printf " --- WARNING: ln failed, using cp instead (might be time consuming...)\n"
fi
cp ${localout[$i]} ${pathout[$i]}.${extout[$i]}
else
printf "+++ no copy because file ${pathout[$i]}.${extout[$i]} exists\n"
fi
else
printf "\n >>> OUTPUT: ${localout[$i]} to"
printf "\n ${pathout[$i]}\n"
if [[ $link_local_output = true ]]
then
printf " file will be linked\n"
ln -f ${localout[$i]} ${pathout[$i]}
fi
# If "ln -f" fails of if "$link_local_output = false" do a normal "cp"
if [[ ! -f "${pathout[$i]}" ]]
then
if [[ $link_local_output = true ]]
then
printf " --- WARNING: ln failed, using cp instead (might be time consuming...)\n"
fi
cp ${localout[$i]} ${pathout[$i]}
else
printf "+++ no copy because file ${pathout[$i]} exists\n"
fi
fi
elif [[ "${actionout[$i]}" = "" && $files_for_cores = true ]]
then
# FILES FROM THE DIFFERENT CORES ARE MOVED WITH ln-COMMAND TO THE PERMANENT DIRECTORY
# AS A FIRST STEP, THE PERMANENT DIRECTORY IS CREATED
printf "\n >>> OUTPUT: ${localout[$i]}/_.... to"
printf "\n ${pathout[$i]}\n"
if [[ $link_local_output = true ]]
then
printf " files will be linked\n"
mkdir -p ${pathout[$i]}
cd ${localout[$i]}
for file in $(ls *)
do
ln -f $file ${pathout[$i]}
done >|/dev/null 2>&1
cd $tempdir
fi
# IF "ln -f" HAS FAILED OR IF "$link_local_output = false" DO A NORMAL COPY "cp -r"
if [[ ! -f "${pathout[$i]}/_000000" ]]
then
if [[ $link_local_output = true ]]
then
printf " --- WARNING: ln failed, using cp instead (might be time consuming...)\n"
fi
[[ ! -d "${pathout[$i]}" ]] && mkdir ${pathout[$i]}
cp -r ${localout[$i]}/* ${pathout[$i]}
fi
fi
fi
done
if (( i != 0 ))
then
timestring=`date +%H:%M:%S`
if [[ $transfer_problems = true ]]
then
printf "\n$dashes\n *** OUTPUT-files saved local time: $timestring"
printf "\n +++ WARNING: some data transfers failed! \n"
else
printf "\n$dashes\n *** all OUTPUT-files saved local time: $timestring \n"
fi
fi
# IF REQUIRED, START A RESTART-JOB
# FILE CONTINUE_RUN MUST HAVE BEEN CREATED BY THE EXECUTABLE (PALM)
if [[ -f CONTINUE_RUN ]]
then
# ADD RESTART-OPTIONS TO THE PALMRUN-CALL (IF THEY ARE NOT USED ALREADY):
# -C TELLS PALMRUN THAT IT IS A RESTART-RUN
# -v SILENT MODE WITHOUT INTERACTIVE QUERIES
# -b START A BATCH JOB
[[ $(echo $prc | grep -c "\-C") = 0 ]] && prc="$prc -C"
[[ $(echo $prc | grep -c "\-v") = 0 ]] && prc="$prc -v"
[[ $(echo $prc | grep -c "\-b") = 0 && $running_on_remote = false ]] && prc="$prc -b"
# REPLACE SVFOUT IN THE ACTIVATION STRINGS (GIVEN WITH OPTION -a)
# SO THAT RESTARTS USE SVF DATA CREATED BY THE INITIAL RUN
if [[ $(echo $prc | grep -c "svfout") != 0 ]]
then
prc=`echo $prc | sed 's/svfout/svfin/g'`
fi
# REPLACE THE HASH IN THE ACTIVATION STRINGS (GIVEN WITH OPTION -a)
# SO THAT RESTARTS ACCESS DIFFERENT FILES THAN THE INITIAL RUN
if [[ $(echo $prc | grep -c "#") != 0 ]]
then
prc=`echo $prc | sed 's/#/r/g'`
fi
# START THE RESTART-JOB
printf "\n\n *** initiating restart-run on \"$local_ip\" using command:\n"
echo " $prc"
printf "\n$dashes\n"
if [[ $running_on_remote = true ]]
then
echo "*** ssh will be used to initiate restart-runs!"
echo " return_address=\"$return_address\" "
echo " return_username=\"$local_username\" "
if [[ "$remote_loginnode" != "" ]]
then
ssh -q $remote_username@$remote_loginnode "ssh -q $SSH_PORTOPT $local_username@$return_address \" PATH=\\\$PATH:$LOCAL_PALMRUN_PATH; cd $LOCAL_PWD; $prc\" " | tee palmrun_restart.log
else
ssh -q $SSH_PORTOPT $local_username@$return_address " PATH=\\\$PATH:$LOCAL_PALMRUN_PATH; cd $LOCAL_PWD; $prc" | tee palmrun_restart.log
fi
# WAIT TO ALLOW THE RESTART-JOB TO BE QUEUED, BEFORE THE CURRENT JOB IS FINISHED
sleep 30
else
# START THE RESTART JOB ON THE LOCAL HOST
eval $prc | tee palmrun_restart.log # THE ' MUST BE EVALUATED
fi
# CHECK, IF RESTART JOB HAS BEEN STARTED
if [[ $( grep -c "+++ palmrun crashed" palmrun_restart.log ) != 0 ]]
then
printf "\n$dashes\n +++ creating restart run failed \n"
locat=create_restart
rm palmrun_restart.log
exit
elif [[ $( grep -c "*** palmrun finished" palmrun_restart.log ) != 1 ]]
then
printf "\n$dashes\n +++ creating restart run failed, probably due to network problems\n"
locat=create_restart
rm palmrun_restart.log
exit
else
printf "\n$dashes\n *** restart run initiated \n"
rm palmrun_restart.log
fi
# DELETE INPUT-(RESTART)FILES, WHICH HAVE BEEN FETCHED FROM THE TEMPORARY DATA
# DIRECTORY, BACAUSE THEY ARE NOT REQUIRED BY THE RESTART-JOB.
# THIS IS DONE IN ORDER TO AVOID EXCEEDING DISC QUOTAS OR DISC SPACE (RESTART-FILES
# MAY BE VERY HUGE)
(( i = 0 ))
while (( i < nr_of_input_files ))
do
(( i = i + 1 ))
if [[ "${got_tmp[$i]}" = true && $keep_data_from_previous_run = false ]]
then
rm -r ${absnamein[$i]}
fi
done
fi
# ALL ACTIONS FINISHED, TEMPORARY WORKING-DIRECTORY CAN BE DELETED
cd $HOME
[[ $delete_temporary_catalog = true ]] && rm -rf $tempdir
else
# PREPARING ACTIONS,
# IF A BATCH-JOB IS TO BE GENERATED AND TO BE STARTED ON A LOCAL OR REMOTE-MACHINE
# BUILD THE PALMRUN-COMMAND TO BE CALLED IN THE BATCH-JOB
palmrun_com="$palmrun_script_name -r $run_identifier -c $configuration_identifier -m $memory -t $cpumax -q $queue -i $run_id_number -U $local_username"
[[ "$activation_string_list" != "" ]] && palmrun_com=${palmrun_com}" -a \"$activation_string_list\""
[[ "$global_revision" != "" ]] && palmrun_com=${palmrun_com}" -G \"$global_revision\""
[[ $keep_data_from_previous_run = true ]] && palmrun_com=${palmrun_com}" -k"
[[ $do_trace = true ]] && palmrun_com=${palmrun_com}" -x"
[[ "$cores" != "" ]] && palmrun_com=${palmrun_com}" -X $cores"
[[ $use_openmp = true ]] && palmrun_com=${palmrun_com}" -O $threads_per_task"
[[ $tasks_per_node != 0 ]] && palmrun_com=${palmrun_com}" -T $tasks_per_node"
[[ $delete_temporary_catalog = false ]] && palmrun_com=${palmrun_com}" -B"
[[ "$ocean_file_appendix" = true ]] && palmrun_com=${palmrun_com}" -y"
[[ $run_coupled_model = true ]] && palmrun_com=${palmrun_com}" -Y \"$coupled_dist\""
[[ "$combine_plot_fields" = false ]] && palmrun_com=${palmrun_com}" -Z"
[[ "$max_par_io_str" != "" ]] && palmrun_com=${palmrun_com}" -w $max_par_io_str"
[[ "$project_account" != "" ]] && palmrun_com=${palmrun_com}" -A $project_account"
if [[ $create_remote_batch_job = true ]]
then
palmrun_com=${palmrun_com}" -j -u $remote_username -R $local_ip"
if [[ $do_trace = true ]]
then
printf "\n *** PALMRUN-command on remote host:\n $palmrun_com \n"
fi
elif [[ $create_batch_job = true ]]
then
palmrun_com=${palmrun_com}" -j"
if [[ $do_trace = true ]]
then
printf "\n *** PALMRUN-command on local host:\n $palmrun_com \n"
fi
fi
# DETERMINE THE FULL PATHS FOR THE JOB PROTOCOL FILES ON THE LOCAL AND
# REMOTE HOST
job_protocol_file_local=${local_jobcatalog}/${configuration_identifier}_${run_id}
job_protocol_file=$job_protocol_file_local
if [[ $create_remote_batch_job = true ]]
then
job_protocol_file_remote=${remote_jobcatalog}/${configuration_identifier}_${run_id}
job_protocol_file=$job_protocol_file_remote
job_transfer_protocol_file=${remote_jobcatalog}/last_job_transfer_protocol
scpjob_file=${remote_jobcatalog}/scpjob.$run_id_number
fi
# BUILD THE JOB-SCRIPTS ON FILE jobfile
jobfile=jobfile.$run_id_number
# FIRST CREATE THE BATCH DIRECTIVES
(( i = 0 ))
while (( i < ibd ))
do
(( i = i + 1 ))
line=`echo "${batch_directive[$i]}" | sed 's/{{/$/g' | sed 's/}}//g'`
eval line=\"$line\"
echo "$line" >> $jobfile
done
echo " " >> $jobfile
# FOR BATCH JOBS ON REMOTE HOSTS, ADD THE JOBFILE TO SEND BACK THE JOB
# PROTOCOL
if [[ $create_remote_batch_job = true ]]
then
echo "set +vx" >> $jobfile
echo "trap '" >> $jobfile
echo "set +vx" >> $jobfile
echo "cd ${remote_jobcatalog}" >> $jobfile
echo "cat > scpjob.$run_id_number << %%END%%" >> $jobfile
# ADD THE BATCH DIRECTIVES
(( i = 0 ))
while (( i < ibdt ))
do
(( i = i + 1 ))
line=`echo "${batch_directive_transfer[$i]}" | sed 's/{{/$/g' | sed 's/}}//g'`
eval line=\"$line\"
echo "$line" >> $jobfile
done
echo " " >> $jobfile
echo "set -x" >> $jobfile
if [[ "$remote_loginnode" != "" ]]
then
echo "ssh -q $remote_username@$remote_loginnode \"cd ${remote_jobcatalog}; ${fast_io_catalog}/${sources_for_run_catalog}/batch_scp $PORTOPT -d -w 10 -u $local_username $local_ip $job_protocol_file_remote \\\"$local_jobcatalog\\\" ${configuration_identifier}_${run_identifier}\" " >> $jobfile
else
echo "${fast_io_catalog}/${sources_for_run_catalog}/batch_scp $PORTOPT -d -w 10 -u $local_username $local_ip $job_protocol_file_remote \"$local_jobcatalog\" ${configuration_identifier}_${run_identifier}" >> $jobfile
fi
echo "%%END%%" >> $jobfile
echo "echo \" *** submitting job for transfering the job protocol file to $local_ip\" " >> $jobfile
echo "$submit_command $scpjob_file" >> $jobfile
echo "rm $scpjob_file" >> $jobfile
echo "rm -rf $job_transfer_protocol_file" >> $jobfile
echo "set -x" >> $jobfile
echo " ' exit" >> $jobfile
fi
# ACTIVATE ERROR-TRACEBACK
if [[ $do_trace = true ]]
then
echo "set -x" >> $jobfile
else
echo "set +vx" >> $jobfile
fi
# INITIALIZE THE ENVIRONMENT AND LOAD MODULES
if [[ "$login_init_cmd" != "" ]]
then
echo "$login_init_cmd" >> $jobfile
fi
if [[ "$module_commands" != "" ]]
then
echo "$module_commands" >> $jobfile
fi
# CREATE TEMPORARY DIRECTORY AND SWITCH TO IT
if [[ $create_remote_batch_job = true ]]
then
echo "mkdir $tempdir" >> $jobfile
echo "if [[ \$? != 0 ]]" >> $jobfile
echo "then" >> $jobfile
echo " echo \"+++ temporary working directory cannot be created.\" " >> $jobfile
echo " echo \" Check setting of variable fast_io_catalog in your config file.\" " >> $jobfile
echo " exit" >> $jobfile
echo "fi" >> $jobfile
echo "chmod go+rx $tempdir" >> $jobfile
else
# DIRECTORY FOR LOCAL BATCH JOBS IS CREATED NOW, DUE TO A
# REQUIREMENT OF THE GRID ENGINE BATCH SYSTEM (WORKING DIR IS GIVEN IN
# BATCH DIRECTIVE -wd AND MUST ALREADY EXIST WHEN THE JOB IS SUBMITTED)
mkdir $tempdir
if [[ $? != 0 ]]
then
printf "\n +++ temporary working directory cannot be created."
printf "\n Check setting of variable fast_io_catalog in your config file."
locat=execution
exit
fi
chmod go+rx $tempdir
fi
echo "cd $tempdir" >> $jobfile
echo "export tempdir=$tempdir" >> $jobfile
echo "cp ${fast_io_catalog}/${sources_for_run_catalog}/.[!.]* ." >> $jobfile
echo "export PATH=.:${fast_io_catalog}/${sources_for_run_catalog}:\$PATH" >> $jobfile
echo "export execute_palmrun=true" >> $jobfile
# PROVIDE NAME OF THE CURRENT WORKING-DIRECTORY ON THE LOCAL MACHINE (FROM WHERE THE JOB IS
# STARTED) BY SETTING AN ENVIRONMENT-VARIABLE. THIS INFORMATION IS USED IN THE JOB BY PALMRUN
# IN CASE THAT RESTART-RUNS HAVE TO BE GENERATED
echo "LOCAL_PWD=$working_directory" >> $jobfile
echo "export LOCAL_PWD" >> $jobfile
# PROVIDE THE PATH OF THE LOCAL PALMRUN-SCRIPT FOR THE SAME REASON
echo "LOCAL_PALMRUN_PATH=${source_path}/../SCRIPTS" >> $jobfile
echo "export LOCAL_PALMRUN_PATH" >> $jobfile
# CALL PALMRUN WITHIN THE JOB
# AS FINAL ACTION, REMOVE THE TEMPORARY DIRECTORY CREATED AT THE BEGINNING OF THE JOB
echo "set -x" >> $jobfile
echo "[[ \$execute_palmrun = true ]] && $palmrun_com" >> $jobfile
# TRANSFER JOBFILE TO THE TARGET HOST
if [[ $create_jobfile_only = false ]]
then
# CREATE LOCAL JOB FOLDER
eval local_jobcatalog=$local_jobcatalog
if [[ ! -d $local_jobcatalog ]]
then
echo " "
echo " *** local jobcatalog \"$local_jobcatalog\" does not exist and will be created now"
mkdir $local_jobcatalog
fi
if [[ $create_remote_batch_job = true ]]
then
echo " "
echo " *** transfer of job to remote host via scp"
# CREATE REMOTE JOB FOLDER, IF IT DOES NOT EXIST
ssh -q $ssh_key $SSH_PORTOPT ${remote_username}@${remote_ip} "[[ ! -d $remote_jobcatalog ]] && mkdir $remote_jobcatalog" 2>&1
# COPY THE JOB FILE
if [[ $do_trace = true ]]
then
echo " scp $ssh_key $PORTOPT $jobfile ${remote_username}@${remote_ip}:${remote_jobcatalog}/${configuration_identifier}_${run_id}"
fi
scp $ssh_key $PORTOPT $jobfile ${remote_username}@${remote_ip}:${remote_jobcatalog}/${configuration_identifier}_${run_id} > /dev/null
# SUBMIT THE JOB
printf " *** submit the job (output of submit command, \n"
printf " e.g. the job-id given by the batch-system, may follow) \n"
if [[ $do_trace = true ]]
then
echo " ssh -q $ssh_key $SSH_PORTOPT ${remote_username}@${remote_ip} \"cd $remote_jobcatalog; $submit_command ${configuration_identifier}_${run_id}; rm ${configuration_identifier}_${run_id}\" "
fi
ssh -q $ssh_key $SSH_PORTOPT ${remote_username}@${remote_ip} "cd $remote_jobcatalog; $submit_command ${configuration_identifier}_${run_id}; rm ${configuration_identifier}_${run_id}"
elif [[ $create_batch_job = true ]]
then
eval local_jobcatalog=$local_jobcatalog
cp $jobfile ${local_jobcatalog}/${configuration_identifier}_${run_id}
cd $local_jobcatalog
echo " "
echo " *** submit the job"
if [[ $do_trace = true ]]
then
echo "$submit_command ${configuration_identifier}_${run_id}"
fi
$submit_command ${configuration_identifier}_${run_id}
rm ${configuration_identifier}_${run_id}
cd - > /dev/null
fi
rm -rf $jobfile
else
printf "\n *** jobfile created under name \"$jobfile\" "
printf "\n no batch-job has been sent!"
fi
fi # END OF REMOTE-PART