Home

Context Navigation

source: palm/trunk/SCRIPTS/mbuild @ 808

Last change on this file since 808 was 807, checked in by maronga, 13 years ago
new utility check_namelist_files implemented
Property svn:keywords set to `Id Rev`
File size: 50.6 KB

Line
1	#!/bin/ksh
2	# mbuild - script for compiling the PALM code and its utility programs
3	# $Id: mbuild 807 2012-01-25 11:53:51Z maronga $
4
5	# Procedure to compile code on local and remote hosts using the
6	# make-mechanism. The source code must be provided on the local host.
7
8	# Last changes:
9	# 06/05/02 - Siggi - start development
10	# 12/06/02 - Siggi - first version finished
11	# 12/09/02 - Siggi - ibmh (hanni.hlrn.de) included
12	# 19/12/02 - Siggi - ibmb included
13	# 05/02/03 - Siggi - hostname nobela included
14	# 04/03/03 - Siggi - host nech included
15	# 06/03/03 - Siggi - make_call_string is echoed without '' to
16	# file LAST_MAKE_CALL (otherwise error on NEC, because
17	# '' are part of compiler options
18	# 16/03/03 - Siggi - Two underscores are placed in front of every define
19	# string, in case that palm.f90 version contains
20	# such strings
21	# 16/04/03 - Siggi - First extensions for linux machines
22	# 24/06/03 - Siggi - host orkan included
23	# 17/07/03 - Siggi - IP adress set to new "cross" machine at DKRZ
24	# 24/07/03 - Siggi - host maestro admitted
25	# 06/08/03 - Siggi - host gregale admitted
26	# 05/11/03 - Siggi - hosts irifi and quanero are now belonging to lcmuk
27	# 19/11/03 - Heiko - on lcmuk, mbuild does not tar the *.i files
28	# 08/01/04 - Siggi - additional preprocessor directive for ibm included
29	# (-D$OMP=OMP) in order to avoid problems with
30	# OMP_NUM_THREADS
31	# 09/01/04 - Siggi - action above cancelled
32	# 28/01/04 - Siggi - action above re-cancelled
33	# 08/03/04 - Siggi - host scirocco admitted
34	# 26/03/04 - Siggi - .o and .mod files are also deleted in depository, if
35	# the respective .f90 file is not listed in the makefile
36	# and deletion is demanded by the user
37	# 12/04/04 - Siggi - scp2 instead of scp used for transfer from decalpha
38	# due to error in ssh installation (otherwise a prompt
39	# for the password appears)
40	# 23/07/04 - Siggi - changes due to the new berni configuration
41	# (federation switch)
42	# 08/09/04 - Siggi - hanni IP address changed to 130.75.4.10
43	# 23/09/04 - Joerg - correction of IP-Address for 'cross' (DKRZ)
44	# 09/03/05 - Siggi - on nech, mbuild does not tar the *.i files
45	# 31/03/05 - Siggi - mbuild does not tar *.i files any more
46	# 24/04/05 - Siggi - netcdf support on lcmuk
47	# 25/04/05 - Siggi - netcdf support on gfdl3 (decalpha)
48	# 12/05/05 - Siggi - netcdf support on ibm
49	# set OBJECT_MODE=64 for compiling on ibmb, ibmh
50	# 18/05/05 - Siggi - netcdf support on nec
51	# 19/05/05 - Siggi - IP addres 134.75.155.74 changed to 165.132.26.56
52	# 23/05/05 - Siggi - netcdf support on ibms
53	# 01/06/05 - Siggi - reset of cpp_options to "" on lcmuk
54	# 30/06/05 - Siggi - netcdf support on bora
55	# 20/10/05 - Siggi - update of netcdf-version on decalpha (gfdl3)
56	# 04/11/05 - Siggi - netcdf 3.6.0-p1 on ibmh/ibmb
57	# 30/12/05 - Siggi - change of IP adresses in subnet 130.75.105
58	# host gfdl5 (ibmy) admitted
59	# 10/01/06 - Siggi - cpp directive for NetCDF 64bit support
60	# 20/01/06 - Siggi - cpp directive for ibmy
61	# 09/02/06 - Marcus- compile only once on lcmuk (as on ibmh/ibmb)
62	# 10/02/06 - Siggi - modifications for scp on decalpha
63	# 13/04/06 - Siggi - ostria admitted
64	# 19/04/06 - Siggi - preprocessor directive -D$OMP=OMP for ibm removed
65	# 23/05/05 - Siggi - lctit (SUN Fire X4600) admitted
66	# 29/05/05 - Siggi - atmos (lcide) admitted
67	# 23/08/06 - Siggi - netcdf support for scirocco (notebook)
68	# 24/11/06 - Siggi - breva and levanto admitted
69	# 07/02/07 - Siggi - adapted for RIAM (neck)
70	# 10/02/07 - Siggi - all hpmuk-related code removed
71	# 02/03/07 - Siggi - compilation of utility programs and transfer of
72	# scripts to remote hosts added (option -u)
73	# 14/03/07 - Siggi - fimm admitted, revision number added to terminal
74	# output
75	# 16/03/07 - Siggi - adjustments (netcdf) for lctit
76	# adjustments for running under pdksh, local ip-addres
77	# is not determined any more
78	# 30/03/07 - Siggi - cpp-directives/options + netcdf-options are read
79	# from configuration file
80	# host identifier (local_host) is read from config file
81	# 10/10/07 - Siggi - bugfix: handling of comment lines
82	# 18/07/08 - Siggi - adapted for lcsgih
83	# 21/07/08 - Siggi - mainprog (executable) is added to the tar-file
84	# ({mainprog}_current_version)
85	# 02/10/08 - Siggi - adapted for lcxt4
86	# 14/11/08 - Siggi - update mechanism completely revised: source tarfile
87	# remains in source directory, one depository per block
88	# (given in the config-file) is created, allways all
89	# files from the source directory are copied to the
90	# respective depository, no additional file checks are
91	# done any more (version 2.1)
92	# 13/01/09 - Marcus- re-enable compilation more than once on lcmuk (as on
93	# other machines)
94	# 21/03/09 - Siggi - -u copies also copies process_dvr_output and
95	# .dvrserver.config
96	# 21/04/09 - Siggi - adjustments for new IBM at DKRZ, which is now ibmh
97	# 25/08/09 - BjornM- adapted for lck
98	# 01/12/09 - BjornM- re-adjustments for lcxt4
99	# 01/02/10 - Siggi - adjustments for lcxt5m
100	# 03/02/10 - Siggi - make options (mopts) to be set by configuration file
101	# implemented, remoted mode option -r completely
102	# removed, t3e related parts removed
103	# 26/02/10 - BjornM- re-adjustments for lcxt4 (new modules)
104	# 01/03/10 - Siggi - mpilib replaced by modules: explicit module settings
105	# removed; modules should now be given in the
106	# configuration file
107	# 02/03/10 - Siggi - utility programs are created separately for each
108	# block in the configuration file,
109	# parallel make for utility programs
110	# 12/03/10 - Siggi - bugfix: remode_md was given a wrong value
111	# 16/08/10 - BjornM- bugfix: call of modules on local host, new workaround
112	# for lcxt4
113	# 07/09/10 - Siggi - bugfix for wrong netcdf/3.6.3 module on lcsgi
114	# 08/12/10 - Siggi - initialization of the module command changed for
115	# SGI-ICE/lcsgi
116	# adjustments for Kyushu Univ. (lcrte, ibmku)
117	# 14/12/10 - Siggi - adjustments for new Tsubame system at Tokyo
118	# institute of technology (lctit)
119	# 04/03/11 - BjornM- re-adjustments for lcxt4
120	# 06/03/11 - Siggi - adjustments for ibmkisti
121	# 03/04/11 - Micha - added lckordi
122	# 17/08/11 - Siggi - HLRN access via hicegate0 (130.75.4.101)
123	# 27/11/11 - Siggi - Bugfix for make options setting (-j)
124	# 12/12/11 - BjornM- added mrun GUI to ulitity programs
125	# 25/01/12 - BjornM- compilation of check_namelist_files (namelist file
126	# check program) has been added to the utility branch),
127	# modfified the compilation of mrungui
128
129
130
131	# VARIABLE DECLARATIONS + DEFAULT VALUES
132	compile_utility_programs=false
133	config_file=.mrun.config
134	fimm=false
135	host=all
136	host_found=false
137	locat=normal
138	makefile=""
139	module_calls=""
140	scirocco=false
141	silent=false
142	suf=f90
143	update=false
144	working_directory=`pwd`
145
146	typeset -i ih ihost=0
147
148	typeset -R30 calltime
149	typeset -L20 column1
150	typeset -L50 column2
151	typeset -L70 column3
152	typeset -L40 version="MBUILD 2.1 Rev$Rev: 807 $"
153
154	# ERROR HANDLING
155	# IN CASE OF EXIT:
156	trap 'rm -rf $working_directory/tmp_mbuild
157	if [[ $locat != normal ]]
158	then
159	printf "\n\n +++ mbuild killed \n\n"
160	else
161	printf "\n\n *** mbuild finished \n\n"
162	fi' exit
163
164
165	# IN CASE OF TERMINAL-BREAK:
166	trap 'rm -rf $working_directory/tmp_mbuild
167	printf "\n\n +++ mbuild killed by \"^C\" \n\n"
168	exit
169	' 2
170
171
172	tmp_mbuild=${working_directory}/tmp_mbuild
173
174	# READ SHELLSCRIPT-OPTIONS
175	while getopts :c:h:m:s:u option
176	do
177	case $option in
178	(c) config_file=$OPTARG;;
179	(h) host=$OPTARG;;
180	(m) makefile=$OPTARG;;
181	(s) suf=$OPTARG;;
182	(u) compile_utility_programs=true;;
183	(\?) printf "\n +++ unknown option $OPTARG \n";
184	locat=parameter; exit;;
185	esac
186	done
187
188
189
190	# CHECK, IF CONFIGURATION-FILE EXISTS
191	if [[ ! -f $config_file ]]
192	then
193	printf "\n +++ configuration file: "
194	printf "\n $config_file"
195	printf "\n does not exist"
196	locat=configuration; exit
197	fi
198
199
200
201	# DETERMINE THE LOCAL HOST
202	local_host_real_name=$(hostname)
203	# local_addres=$(nslookup `hostname` 2>&1 \| grep "Address:" \| tail -1 \| awk '{print $2}')
204
205
206
207	# DETERMINE HOST-IDENTIFIER (local_host) FROM THE CONFIG-FILE
208	line=""
209	grep "%host_identifier" $config_file > $tmp_mbuild
210	while read line
211	do
212	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
213	then
214	HOSTNAME=`echo $line \| cut -d" " -s -f2`
215	host_identifier=`echo $line \| cut -d" " -s -f3`
216	if [[ $local_host_real_name = $HOSTNAME ]]
217	then
218	local_host=$host_identifier
219	break
220	fi
221	fi
222	done < $tmp_mbuild
223
224	if [[ "$local_host" = "" ]]
225	then
226	printf "\n +++ no host identifier found in configuration file \"$config_file\""
227	printf "\n for local host \"$local_host_real_name\"."
228	printf "\n Please add line"
229	printf "\n \"\%host_identifier $local_host_real_name <identifier>\""
230	printf "\n to the configuration file."
231	locat=local_host; exit
232	fi
233
234
235
236	[[ $local_host_real_name = scirocco ]] && scirocco=true
237	[[ $local_host_real_name = fimm.bccs.uib.no ]] && fimm=true
238
239
240
241	if [[ $local_host != ibms ]]
242	then
243	config_file=$PWD/$config_file
244	else
245	config_file=`pwd`/$config_file
246	fi
247
248
249
250	# DETERMINE USER NAME ON LOCAL HOST FROM THE CONFIG-FILE
251	line=""
252	grep " $local_host" $config_file \| grep "%remote_username" > $tmp_mbuild
253	while read line
254	do
255	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
256	then
257	local_username=`echo $line \| cut -d" " -s -f2`
258	fi
259	done < $tmp_mbuild
260
261
262	if [[ "$local_username" = "" ]]
263	then
264	printf "\n +++ no user name found in configuration file"
265	printf "\n for local host \"$local_host\" "
266	locat=config_file; exit
267	fi
268
269
270	# DETERMINE LOCAL SOURCE-CODE PATH.
271	# FIRST CHECK, IF A GLOBAL SOURCE-CODE PATH HAS BEEN DECLARED FOR ALL HOSTS.
272	# THEREFORE, FIRST SET ALL GLOBAL VARIABLES DECLARED IN THE CONFIG-FILE,
273	# BECAUSE THEY MAY BE USED AS PART OF THE PATH NAME.
274	line=""
275	grep "%" $config_file > $tmp_mbuild
276	while read line
277	do
278	if [[ "$line" != "" && "$(echo $line \| cut -d" " -s -f3)" = "" && $(echo $line \| cut -c1) != "#" ]]
279	then
280	var=`echo $line \| cut -d" " -s -f1 \| cut -c2-`
281	value=`echo $line \| cut -d" " -s -f2`
282	eval export $var=\$value
283	fi
284	done < $tmp_mbuild
285
286	# NOW CHECK, IF A GLOBAL SOURCE-CODE-PATH HAS BEEN DECLARED
287	line=""
288	grep "%source_path" $config_file > $tmp_mbuild
289	while read line
290	do
291	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
292	then
293	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
294	then
295	global_source_path=`echo $line \| cut -d" " -s -f2`
296	fi
297	fi
298	done < $tmp_mbuild
299
300	line=""
301	grep " $local_host" $config_file \| grep "%source_path" > $tmp_mbuild
302	while read line
303	do
304	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
305	then
306	local_source_path=`echo $line \| cut -d" " -s -f2`
307	fi
308	done < $tmp_mbuild
309
310	if [[ "$local_source_path" = "" ]]
311	then
312	if [[ "$global_source_path" != "" ]]
313	then
314	local_source_path=$global_source_path
315	else
316	printf "\n +++ no source path found in configuration file"
317	printf "\n for local host \"$local_host\" "
318	printf "\n please set \"\%source_path\" in configuration file"
319	locat=config_file; exit
320	fi
321	fi
322	eval local_source_path=$local_source_path
323	eval local_source_path=$local_source_path
324
325
326
327	# DETERMINE GLOBAL DEPOSITORY-PATH
328	line=""
329	grep "%depository_path" $config_file > $tmp_mbuild
330	while read line
331	do
332	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
333	then
334	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
335	then
336	global_depository_path=`echo $line \| cut -d" " -s -f2`
337	fi
338	fi
339	done < $tmp_mbuild
340
341	if [[ $found = false ]]
342	then
343	printf "\n +++ no \%depository_path found in"
344	printf "\n $config_file"
345	locat=depository_path; exit
346	fi
347
348	# CHECK, IF A MAIN PROGRAM HAS BEEN DEFINED IN THE CONFIG-FILE
349	if [[ $(grep -c "%mainprog" $config_file) != 1 ]]
350	then
351	printf "\n +++ no main program or more than one main program defined"
352	printf "\n in configuration file"
353	locat=configuration; exit
354	else
355	line=`grep "%mainprog" $config_file`
356	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
357	then
358	printf "\n +++ no main program defined in configuration file"
359	locat=configuration; exit
360	fi
361	mainprog=`echo $line \| cut -d" " -s -f2 \| cut -d"." -f1`
362	fi
363
364
365
366	# CHECK IF MAKEFILE EXITS
367	[[ "$makefile" = "" ]] && makefile=$local_source_path/Makefile
368	if [[ ! -f $makefile ]]
369	then
370	printf "\n +++ makefile: "
371	printf "\n $makefile"
372	printf "\n does not exist"
373	locat=makefile; exit
374	fi
375
376
377	# HEADER-OUTPUT (PART1: MESSAGES CONCERNING THE LOCAL HOST)
378	calltime=$(date)
379	printf "\n"
380	printf "#------------------------------------------------------------------------# \n"
381	printf "\| $version$calltime \| \n"
382	printf "\| \| \n"
383	column1="called on:"; column2=$local_host_real_name
384	printf "\| $column1$column2 \| \n"
385	column1="local username:"; column2=$local_username
386	printf "\| $column1$column2 \| \n"
387	column1="local IP-addres:"; column2=$local_addres
388	printf "\| $column1$column2 \| \n"
389	column1="config file:"; column2=$config_file
390	printf "\| $column1$column2 \| \n"
391	column1="makefile:"; column2=$makefile
392	printf "\| $column1$column2 \| \n"
393	column1="local source path:"; column2=$local_source_path
394	printf "\| $column1$column2 \| \n"
395	printf "#------------------------------------------------------------------------# \n"
396
397	# printf "\| \| \n"
398
399
400	if [[ $compile_utility_programs = false ]]
401	then
402
403	# IN ANY CASE, GIVE ALL FILES WRITE-PERMIT, IN ORDER TO AVOID PROBLEMS
404	# WITH OVERWRITING FILES ON THE REMOTE HOST
405	cd $local_source_path
406	printf "\n\n *** tar of makefile and source files in $local_source_path"
407	tar -cf ${mainprog}_sources.tar Makefile *.$suf
408	printf "\n"
409
410	else
411	cd $local_source_path
412	printf "\n\n *** tar of makefile and source files in $local_source_path"
413
414	cat Makefile_check\|while read line
415	do
416	line=$(echo $line\|grep RCS)
417	if [[ $line == "RCS" ]]
418	then
419	line=$(echo $line\|sed 's/RCS = //g')
420	break
421	fi
422	done
423
424	tar -cf ${mainprog}_sources_check.tar Makefile_check $line
425	printf "\n"
426
427	fi
428
429
430
431	# GET CONFIRMATION TO CONTINUE
432	if [[ $host = all ]]
433	then
434	printf "\n *** updates will be made for ALL hosts found in"
435	printf "\n the configuration file"
436	else
437	printf "\n *** update will be made for host \"$host\" "
438	fi
439
440	if [[ $silent = false ]]
441	then
442	answer=dummy
443	printf "\n\n"
444	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
445	do
446	printf " >>> continue (y/n) ? "
447	read answer
448	done
449	if [[ $answer = n \|\| $answer = N ]]
450	then
451	locat=user_abort; exit
452	fi
453	fi
454
455
456
457
458	# GENERIERUNG DER AKTUELLEN MODELLVERSION FUER ALLE RECHNER-/UEBERSETZUNGS-
459	# VERSIONEN, DIE IN DER KONFIGURATIONSDATEI GEFUNDEN WERDEN
460	printf "\n *** scanning configuration file for host(s) ..."
461
462	grep %fopts $config_file > $tmp_mbuild
463	while read line
464	do
465	# KOMMENTARZEILEN UEBERSPRINGEN
466	[[ $(echo $line \| cut -c1) = "#" ]] && continue
467	(( ihost = ihost + 1 ))
468	hostline[$ihost]="$line"
469	done < $tmp_mbuild
470
471
472	while (( ih < ihost ))
473	do
474
475	(( ih = ih + 1 ))
476
477	# REMOTE-RECHNER UND UEBERSETZUNGS-VERSION FESTSTELLEN
478	# NUR WEITERMACHEN, WENN ENTSPRECHENDER REMOTE-RECHNER MITTELS
479	# SHELLSCRIPT-OPTION AUCH AUSGEWAEHLT WURDE
480	remote_host_string=`echo ${hostline[$ih]} \| cut -d" " -s -f3-`
481	remote_host=`echo $remote_host_string \| cut -d" " -f1`
482	if [[ $host != all ]]
483	then
484	[[ $remote_host != $host ]] && continue
485	fi
486	host_found=true
487	condition1=`echo $remote_host_string \| cut -d" " -s -f2`
488	if [[ $condition1 = $remote_host ]]
489	then
490	condition1=""
491	else
492	condition2=`echo $remote_host_string \| cut -d" " -s -f3`
493	fi
494
495	modules=""
496	netcdf_inc=""
497	netcdf_lib=""
498	make_options=""
499
500	# IP-ADRESSE DES REMOTE-RECHNERS BESTIMMEN
501	case $remote_host in
502	(lckordi) remote_adress=210.219.61.8;;
503	(lcmuk) remote_addres=130.75.105.2;;
504	(lcrte) remote_addres=133.5.185.60;;
505	(lcsgib) remote_addres=130.73.232.102;;
506	(lcsgih) remote_addres=130.75.4.101;;
507	(lck) remote_addres=165.132.26.61;;
508	(lctit) remote_addres=10.1.6.170;;
509	(lcxt4) remote_addres=129.177.20.113;;
510	(lcxt5m) remote_addres=193.166.211.144;;
511	(decalpha) remote_addres=165.132.26.56;;
512	(ibmh) remote_addres=136.172.40.15;;
513	(ibmkisti) remote_addres=150.183.146.24;;
514	(ibmku) remote_addres=133.5.4.129;;
515	(ibms) remote_addres=150.183.5.101;;
516	(ibmy) remote_addres=165.132.26.58;;
517	(nech) remote_addres=136.172.44.192;;
518	(neck) remote_addres=133.5.178.11;;
519	(ground.yonsei.ac.kr) remote_addres=134.75.155.33;;
520	(*) if [[ $local_host != $remote_host ]]
521	then
522	printf "\n +++ remote host \"$remote_host\" unknown";
523	printf "\n please inform PALM group support!"
524	fi;;
525	esac
526
527
528	# REMOTE-USERNAMEN ERMITTELN
529	line=""
530	found=false
531	grep "$remote_host_string" $config_file \| grep "%remote_username" > $tmp_mbuild
532	while read line1
533	do
534
535	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
536	then
537	line="$line1"
538	fi
539
540	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
541	then
542	remote_username=`echo $line \| cut -d" " -s -f2`
543	found=true
544	fi
545
546	done < $tmp_mbuild
547
548	if [[ $found = false ]]
549	then
550	printf "\n +++ no remote username found in configuration file"
551	printf "\n for \"$remote_host_string\" "
552	locat=config_file; exit
553	fi
554
555
556	# REMOTE-QUELLTEXTPFAD ERMITTELN
557	line=""
558	remote_source_path=""
559	grep "$remote_host_string" $config_file \| grep "%source_path" > $tmp_mbuild
560	while read line1
561	do
562
563	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
564	then
565	line="$line1"
566	fi
567
568	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
569	then
570	remote_source_path=`echo $line \| cut -d" " -s -f2`
571	fi
572
573	done < $tmp_mbuild
574
575	if [[ "$remote_source_path" = "" ]]
576	then
577	if [[ "$global_source_path" != "" ]]
578	then
579	remote_source_path=$global_source_path
580	else
581	printf "\n +++ no source path found in configuration file"
582	printf "\n for \"$remote_host_string\" "
583	locat=config_file; exit
584	fi
585	fi
586
587	remote_ud=${remote_source_path}/../UTIL
588	remote_ud=$(eval echo $remote_ud)
589
590
591	# REMOTE-PFAD FUER MAKE-DEPOSITORY ERMITTELN
592	remote_md=""
593	line=""
594	grep "$remote_host_string" $config_file \| grep "%depository_path" > $tmp_mbuild
595	while read line1
596	do
597
598	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
599	then
600	line="$line1"
601	fi
602
603	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
604	then
605	remote_md=`echo $line \| cut -d" " -s -f2`
606	fi
607
608	done < $tmp_mbuild
609
610	if [[ "$remote_md" = "" ]]
611	then
612	if [[ "$global_depository_path" != "" ]]
613	then
614	remote_md=$global_depository_path
615	else
616	printf "\n +++ no depository path found in configuration file"
617	printf "\n for \"$remote_host_string\" "
618	printf "\n please set \"\%depository_path\" in configuration file"
619	locat=config_file; exit
620	fi
621	fi
622
623	remote_md=$(eval echo $remote_md)
624	block=""
625	[[ "$condition1" != "" ]] && block=_$condition1
626	[[ "$condition2" != "" ]] && block=${block}_$condition2
627	remote_md=${remote_md}$block
628
629
630	# COMPILERNAMEN ERMITTELN
631	line=""
632	found=false
633	grep "$remote_host_string" $config_file \| grep "%compiler_name " > $tmp_mbuild
634	while read line1
635	do
636
637	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
638	then
639	line="$line1"
640	fi
641
642	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
643	then
644	compiler_name=`echo $line \| cut -d" " -s -f2`
645	found=true
646	fi
647
648	done < $tmp_mbuild
649
650	if [[ $found = false ]]
651	then
652	printf "\n +++ no compiler name found in configuration file"
653	printf "\n for \"$remote_host_string\" "
654	locat=config_file; exit
655	fi
656
657
658	# BEI BENUTZUNG EINES PARALLELEN COMPILERS MUSS AUCH EIN
659	# SERIELLER COMPILERNAME ERMITTELT WERDEN
660	if [[ $(echo $remote_host_string \| grep -c parallel) = 1 ]]
661	then
662	line=""
663	found=false
664	grep "$remote_host_string" $config_file \| grep "%compiler_name_ser" > $tmp_mbuild
665	while read line1
666	do
667
668	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
669	then
670	line="$line1"
671	fi
672
673	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
674	then
675	compiler_name_ser=`echo $line \| cut -d" " -s -f2`
676	found=true
677	fi
678
679	done < $tmp_mbuild
680
681	if [[ $found = false ]]
682	then
683	printf "\n +++ no serial compiler name found in configuration file"
684	printf "\n for \"$remote_host_string\" "
685	locat=config_file; exit
686	fi
687	else
688	compiler_name_ser=$compiler_name
689	fi
690
691
692
693	# PRAEPROZESSOR-OPTIONEN/DIREKTIVEN ERMITTELN
694	line=""
695	found=false
696	grep "$remote_host_string" $config_file \| grep "%cpp_options" > $tmp_mbuild
697	while read line1
698	do
699
700	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
701	then
702	line="$line1"
703	fi
704
705	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
706	then
707	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
708	cpp_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
709	found=true
710	fi
711
712	done < $tmp_mbuild
713
714	if [[ $found = false ]]
715	then
716	printf "\n +++ no preprocessor options found in configuration file"
717	printf "\n for \"$remote_host_string\" "
718	locat=config_file; exit
719	fi
720
721
722	# RECHNERSPEZIFISCHE CPP-DIREKTIVEN HINZUFUEGEN
723	for string in $remote_host_string
724	do
725	if [[ $(echo $remote_host \| cut -c1-2) = lc && $(echo $string \| cut -c1-2) = lc ]]
726	then
727	cpp_options="$cpp_options -D__lc "
728	elif [[ $(echo $remote_host \| cut -c1-3) = ibm && $(echo $string \| cut -c1-3) = ibm ]]
729	then
730	cpp_options="${cpp_options},-D__ibm"
731	elif [[ $(echo $remote_host \| cut -c1-3) = nec && $(echo $string \| cut -c1-3) = nec ]]
732	then
733	cpp_options="${cpp_options} -D__nec"
734	else
735	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
736	then
737	cpp_options="${cpp_options},-D__$string"
738	else
739	cpp_options="$cpp_options -D__$string "
740	fi
741	fi
742	done
743
744
745
746	# NETCDF-OPTIONEN ERMITTELN
747	line=""
748	grep "$remote_host_string" $config_file \| grep "%netcdf_inc" > $tmp_mbuild
749	while read line1
750	do
751
752	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
753	then
754	line="$line1"
755	fi
756
757	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
758	then
759	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
760	netcdf_inc=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
761	fi
762
763	done < $tmp_mbuild
764
765	line=""
766	grep "$remote_host_string" $config_file \| grep "%netcdf_lib" > $tmp_mbuild
767	while read line1
768	do
769
770	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
771	then
772	line="$line1"
773	fi
774
775	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
776	then
777	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
778	netcdf_lib=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
779	fi
780
781	done < $tmp_mbuild
782
783
784
785	# get make options
786	line=""
787	found=false
788	grep "$remote_host_string" $config_file \| grep "%mopts" > $tmp_mbuild
789	while read line1
790	do
791
792	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
793	then
794	line="$line1"
795	fi
796
797	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
798	then
799	# remove colons from directive string
800	make_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
801
802	fi
803
804	done < $tmp_mbuild
805
806
807
808	# COMPILEROPTIONEN ERMITTELN
809	line=""
810	found=false
811	grep "$remote_host_string" $config_file \| grep "%fopts" > $tmp_mbuild
812	while read line1
813	do
814
815	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
816	then
817	line="$line1"
818	fi
819
820	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
821	then
822	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
823	compiler_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
824	found=true
825
826	# NETCDF-INCLUDEVERZEICHNIS HINZUFUEGEN
827	compiler_options="$compiler_options $netcdf_inc"
828	fi
829
830	done < $tmp_mbuild
831
832	if [[ $found = false ]]
833	then
834	printf "\n +++ no compiler options found in configuration file"
835	printf "\n for \"$remote_host_string\" "
836	locat=config_file; exit
837	fi
838
839
840
841	# get modules to be loaded
842	line=""
843	grep "$remote_host_string" $config_file \| grep "%modules" > $tmp_mbuild
844	while read line1
845	do
846
847	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
848	then
849	line="$line1"
850	fi
851
852	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
853	then
854	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
855	modules=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
856	fi
857
858	done < $tmp_mbuild
859
860
861
862
863	# LADER-OPTIONEN ERMITTELN
864	line=""
865	found=false
866	grep "$remote_host_string" $config_file \| grep "%lopts" > $tmp_mbuild
867	while read line1
868	do
869
870	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
871	then
872	line="$line1"
873	fi
874
875	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
876	then
877	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
878	loader_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
879	found=true
880
881	# NETCDF-LIBRARY HINZUFUEGEN
882	loader_options="$loader_options $netcdf_lib"
883	fi
884
885	done < $tmp_mbuild
886
887	if [[ $found = false ]]
888	then
889	printf "\n +++ no loader options found in configuration file"
890	printf "\n for \"$remote_host_string\" "
891	locat=config_file; exit
892	fi
893
894
895	printf "\n\n#------------------------------------------------------------------------# \n"
896	if [[ $remote_host = $local_host ]]
897	then
898	column1="remote_host:"; column2="$remote_host (= local host!)"
899	else
900	column1="remote_host:"; column2=$remote_host
901	fi
902	printf "\| $column1$column2 \| \n"
903	printf "\| \| \n"
904	column1="conditions:"; column2="$condition1 $condition2"
905	printf "\| $column1$column2 \| \n"
906	column1="make depository:"; column2=$remote_md
907	printf "\| $column1$column2 \| \n"
908	line=$(echo "$remote_md" \| cut -c51-)
909	while [[ "$line" != "" ]]
910	do
911	column1=""
912	column2=$line
913	printf "\| $column1$column2 \| \n"
914	line=$(echo "$line" \| cut -c51-)
915	done
916	if [[ $compile_utility_programs = true ]]
917	then
918	column1="utility directory:"; column2=$remote_ud
919	printf "\| $column1$column2 \| \n"
920	fi
921	column1="username:"; column2=$remote_username
922	printf "\| $column1$column2 \| \n"
923	column1="addres:"; column2=$remote_addres
924	printf "\| $column1$column2 \| \n"
925	column1="compiler:"; column2=$compiler_name
926	printf "\| $column1$column2 \| \n"
927	if [[ $compile_utility_programs = true ]]
928	then
929	column1="serial compiler:"; column2=$compiler_name_ser
930	printf "\| $column1$column2 \| \n"
931	fi
932	if [[ "$make_options" != "" ]]
933	then
934	column1="make options:"; column2=$make_options
935	printf "\| $column1$column2 \| \n"
936	fi
937	column1="cpp options:"; column2=$cpp_options
938	printf "\| $column1$column2 \| \n"
939	line=$(echo "$cpp_options" \| cut -c51-)
940	while [[ "$line" != "" ]]
941	do
942	column1=""
943	column2=$line
944	printf "\| $column1$column2 \| \n"
945	line=$(echo "$line" \| cut -c51-)
946	done
947	column1="compiler options:"; column2=$compiler_options
948	printf "\| $column1$column2 \| \n"
949	line=$(echo "$compiler_options" \| cut -c51-)
950	while [[ "$line" != "" ]]
951	do
952	column1=""
953	column2=$line
954	printf "\| $column1$column2 \| \n"
955	line=$(echo "$line" \| cut -c51-)
956	done
957	column1="loader options:"; column2=$loader_options
958	printf "\| $column1$column2 \| \n"
959	line=$(echo "$loader_options" \| cut -c51-)
960	while [[ "$line" != "" ]]
961	do
962	column1=""
963	column2=$line
964	printf "\| $column1$column2 \| \n"
965	line=$(echo "$line" \| cut -c51-)
966	done
967	if [[ $modules != "" ]]
968	then
969	column1="modules to be load:"; column2=$modules
970	printf "\| $column1$column2 \| \n"
971	line=$(echo "$modules" \| cut -c51-)
972	while [[ "$line" != "" ]]
973	do
974	column1=""
975	column2=$line
976	printf "\| $column1$column2 \| \n"
977	line=$(echo "$line" \| cut -c51-)
978	done
979	fi
980	printf "#------------------------------------------------------------------------# \n"
981
982	if [[ $silent = false ]]
983	then
984	answer=dummy
985	printf "\n\n"
986	while [[ "$answer" != y && "$answer" != Y && "$answer" != c && "$answer" != C && "$answer" != s && "$answer" != S && "$answer" != a && "$answer" != A ]]
987	do
988	printf " >>> continue (y(es)/c(ontinue)/a(bort)/s(skip)) ? "
989	read answer
990	done
991	if [[ $answer = a \|\| $answer = A ]]
992	then
993	locat=user_abort; exit
994	fi
995	if [[ $answer = c \|\| $answer = C ]]
996	then
997	silent=true
998	fi
999	if [[ $answer = s \|\| $answer = S ]]
1000	then
1001	continue
1002	fi
1003	fi
1004
1005
1006	# make on remote host
1007	if [[ $remote_host != $local_host ]]
1008	then
1009
1010	if [[ $compile_utility_programs = false ]]
1011	then
1012
1013	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1014	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
1015	echo " *** copying \"${mainprog}_sources.tar\" to \"${remote_addres}:${remote_md}/\" "
1016	if [[ $remote_host != lctit ]]
1017	then
1018	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})"
1019	else
1020	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1021	# MIT SSH, DESHALB AUFRUF PER PIPE
1022	print "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})" \| ssh ${remote_username}@${remote_addres} 2>&1
1023	fi
1024	if [[ $local_host = decalpha ]]
1025	then
1026	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
1027	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1028	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1029	remote_md=`echo $remote_md \| sed 's/\$HOME\///'`
1030	/bin/scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
1031	else
1032	scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
1033	fi
1034
1035
1036
1037	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
1038	echo " *** untar previous update on remote host, if existing"
1039	if [[ $remote_host != lctit ]]
1040	then
1041	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar"
1042	else
1043	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1044	# MIT SSH, DESHALB AUFRUF PER PIPE
1045	print "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
1046	fi
1047
1048
1049	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
1050	echo " *** untar actual sources on remote host"
1051	if [[ $remote_host != lctit ]]
1052	then
1053	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; tar -xf ${mainprog}_sources.tar"
1054	else
1055	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1056	# MIT SSH, DESHALB AUFRUF PER PIPE
1057	print "cd ${remote_md}; tar -xf ${mainprog}_sources.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
1058	fi
1059
1060
1061	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1062	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
1063	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
1064	# Z.B. DIE PFADE ZUM COMPILER)
1065	echo " *** execute \"make\" on remote host"
1066
1067
1068	# generate make call with make options
1069	if [[ $remote_host = nech ]]
1070	then
1071	make_call_string="sxmake $make_options PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1072	else
1073	make_call_string="make $make_options PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1074	fi
1075
1076	# generate command to load modules, if modules are given
1077	if [[ "$modules" != "" ]]
1078	then
1079	if [[ $remote_host = lctit ]]
1080	then
1081	module_calls=". $modules"
1082	else
1083	module_calls="module load ${modules};"
1084	fi
1085
1086	# bugfix for wrong netcdf module
1087	if [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
1088	then
1089	if [[ $(echo $module_calls \| grep -c netcdf/3.6.3-intel) != 0 ]]
1090	then
1091	module_calls="$module_calls export LD_LIBRARY_PATH=/sw/dataformats/netcdf/3.6.3-intel/lib:\$LD_LIBRARY_PATH;"
1092	fi
1093	fi
1094	else
1095	module_calls=""
1096	fi
1097
1098	if [[ $remote_host = ibmkisti \|\| $remote_host = ibms \|\| $remote_host = ibmy ]]
1099	then
1100
1101	ssh ${remote_username}@${remote_addres} "$module_calls cd ${remote_md}; echo '$make_call_string' > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
1102
1103	elif [[ $remote_host = ibmh ]]
1104	then
1105
1106	print "$module_calls export OBJECT_MODE=64; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1107
1108	elif [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
1109	then
1110
1111	# print ". /usr/share/modules/init/bash; $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1112	print "eval \`/sw/swdist/bin/modulesinit\`; $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1113
1114	elif [[ $remote_host = lctit ]]
1115	then
1116
1117	echo " " > ${remote_host}_last_make_protokoll
1118	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
1119	do
1120	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1121	done
1122
1123	elif [[ $remote_host = lcxt4 ]]
1124	then
1125
1126	ssh ${remote_username}@${remote_addres} ". /opt/modules/default/init/ksh; $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
1127
1128	else
1129
1130	print "cd $module_calls ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1131
1132	fi
1133
1134	if [[ $(grep -c MAKE_ERROR ${remote_host}_last_make_protokoll) != 0 ]]
1135	then
1136	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1137	if [[ $silent = false ]]
1138	then
1139	answer=dummy
1140	printf "\n"
1141	while [[ "$answer" != c && "$answer" != k ]]
1142	do
1143	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
1144	read answer
1145	if [[ "$answer" = l ]]
1146	then
1147	more ${remote_host}_last_make_protokoll
1148	fi
1149	done
1150	if [[ $answer = k ]]
1151	then
1152	locat=user_abort; exit
1153	fi
1154	fi
1155	fi
1156
1157
1158
1159	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
1160	printf "\n *** tar update on remote host ..."
1161	if [[ $remote_host != lctit ]]
1162	then
1163	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod"
1164	else
1165	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1166	# MIT SSH, DESHALB AUFRUF PER PIPE
1167	print "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod" \| ssh ${remote_username}@${remote_addres} 2>&1
1168	fi
1169
1170
1171	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
1172	# printf "\n *** \"make clean\" on remote host ..."
1173	# ssh ${remote_username}@${remote_addres} "cd ${remote_md}; make clean; rm ${mainprog}_sources.tar; rm *.f90 Makefile"
1174	# printf "\n"
1175
1176
1177
1178
1179	# GLEICHE AKTIONEN FUER DIE UTILITY-PROGRAMME DURCHFUEHREN
1180	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1181	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
1182	elif [[ $compile_utility_programs = true ]]
1183	then
1184
1185	printf "\n\n"
1186	echo " *** copying scripts and utility programs to \"${remote_addres}:${remote_ud}/\" "
1187	cd ${local_source_path}/../SCRIPTS
1188
1189	if [[ $remote_host != lctit ]]
1190	then
1191	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)"
1192	else
1193	# TIT ERLAUBT NUR DIE AUSFUEHRUNG GANZ BESTIMMTER KOMMANDOS
1194	# MIT SSH, DESHALB AUFRUF PER PIPE
1195	print "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)" \| ssh ${remote_username}@${remote_addres} 2>&1
1196	fi
1197
1198	# KOPIEREN DER SCRIPTE
1199	if [[ $local_host = decalpha ]]
1200	then
1201	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTAENDIGEN PFADES
1202	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1203	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1204	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
1205	/bin/scp batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
1206	else
1207	scp batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
1208	fi
1209
1210	cd - > /dev/null
1211	cd ${local_source_path}/../UTIL
1212
1213
1214	# KOPIEREN DER UTILITY-PROGRAMME
1215	if [[ $local_host = decalpha ]]
1216	then
1217	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
1218	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1219	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1220	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
1221	/bin/scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
1222	else
1223	scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
1224	fi
1225
1226
1227
1228	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1229	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
1230	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
1231	# Z.B. DIE PFADE ZUM COMPILER)
1232	echo " *** execute \"make\" on remote host"
1233
1234	if [[ $remote_host = nech ]]
1235	then
1236	make_call_string="sxmake $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1237	else
1238	make_call_string="make $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1239	fi
1240
1241	# generate command to load modules, if modules are given
1242	if [[ "$modules" != "" ]]
1243	then
1244	if [[ $remote_host = lctit ]]
1245	then
1246	module_calls=". $modules"
1247	else
1248	module_calls="module load ${modules};"
1249	fi
1250
1251	# bugfix for wrong netcdf module
1252	if [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
1253	then
1254	if [[ $(echo $module_calls \| grep -c netcdf/3.6.3-intel) != 0 ]]
1255	then
1256	module_calls="$module_calls export LD_LIBRARY_PATH=/sw/dataformats/netcdf/3.6.3-intel/lib:\$LD_LIBRARY_PATH;"
1257	fi
1258	fi
1259	else
1260	module_calls=""
1261	fi
1262
1263	if [[ $remote_host = ibms \|\| $remote_host = ibmy ]]
1264	then
1265
1266	ssh ${remote_username}@${remote_addres} "$module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR"
1267
1268	elif [[ $remote_host = ibmh ]]
1269	then
1270
1271	print "$module_calls export OBJECT_MODE=64; cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres}
1272
1273	elif [[ $remote_host = lctit ]]
1274	then
1275
1276	echo " " > ${remote_host}_last_make_protokoll
1277	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
1278	do
1279	print "$module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1280	done
1281
1282	elif [[ $remote_host = lcxt4 ]]
1283	then
1284
1285	ssh ${remote_username}@${remote_addres} ". /opt/modules/default/init/ksh; $module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
1286
1287	else
1288
1289	print "$module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1290
1291	fi
1292
1293	fi # ENDE UEBERSETZUNG DER UTILITY-PROGRAMME
1294
1295	rm -rf ${remote_host}_last_make_protokoll
1296
1297	# make on local host
1298	else
1299
1300	# workaround for lcxt4
1301	if [[ $remote_host = lcxt4 ]]
1302	then
1303	. /opt/modules/default/init/ksh
1304	fi
1305
1306	# first load modules, if given
1307	if [[ "$modules" != "" ]]
1308	then
1309	if [[ $remote_host = lctit ]]
1310	then
1311	. $modules
1312	else
1313	module load ${modules}
1314	fi
1315	fi
1316
1317
1318	if [[ $compile_utility_programs = false ]]
1319	then
1320
1321	# DEPOSITORY VERZEICHNIS ERZEUGEN, FALLS NOCH NICHT VORHANDEN
1322	eval remote_md=$remote_md
1323	if [[ ! -d $remote_md ]]
1324	then
1325	if mkdir $remote_md
1326	then
1327	printf "\n\n *** directory for make depository:"
1328	printf "\n $remote_md"
1329	printf "\n was created\n"
1330	else
1331	printf "\n +++ directory for make depository:"
1332	printf "\n $remote_md"
1333	printf "\n cannot be created"
1334	locat=local_depository_path; exit
1335	fi
1336	fi
1337
1338	# QUELLTEXT-DATEIEN AUS REPOSITORY INS DEPOSITORY KOPIEREN
1339	echo " "
1340	echo " *** updating sources in $remote_md"
1341	cd $remote_md
1342	cp $local_source_path/${mainprog}_sources.tar .
1343	tar xf ${mainprog}_sources.tar
1344
1345	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF LOKALEM RECHNER AUSFUEHREN
1346	echo " "
1347	echo " *** execute \"make\" on local host"
1348
1349	make $make_options PROG=$mainprog F90=$compiler_name COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options" 2>&1 \| tee ${remote_host}_last_make_protokoll
1350
1351	if [[ $? != 0 ]]
1352	then
1353	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1354	if [[ $silent = false ]]
1355	then
1356	answer=dummy
1357	printf "\n"
1358	while [[ "$answer" != c && "$answer" != k ]]
1359	do
1360	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
1361	read answer
1362	if [[ "$answer" = l ]]
1363	then
1364	more ${remote_host}_last_make_protokoll
1365	fi
1366	done
1367	if [[ $answer = k ]]
1368	then
1369	locat=user_abort; exit
1370	fi
1371	fi
1372	fi
1373
1374
1375	# TAR NEW VERSION ON LOCAL HOST
1376	printf "\n *** tar update on local host ..."
1377	tar -cf ${mainprog}_current_version.tar .$suf .o *.mod
1378
1379
1380	# COMPILE THE UTILITY PROGRAMS
1381	elif [[ $compile_utility_programs = true ]]
1382	then
1383	printf "\n\n"
1384	echo " *** compiling the utility programs ..."
1385	cd ${local_source_path}/../UTIL
1386
1387	# TOUCH FILES IN ORDER TO FORCE COMPILATION FOR EVERY BLOCK
1388	touch *.f90
1389	make $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options"
1390
1391	# CHECK IF QMAKE IS AVAILABLE AND COMPILE MRUNGUI
1392	printf "\n\n"
1393	echo " *** compiling the mrun GUI"
1394	if which qmake >/dev/null; then
1395	cd mrungui
1396	touch *
1397	qmake
1398	make
1399	make clean
1400	rm Makefile
1401	cd ..
1402	else
1403	echo " +++ no qmake found. The (optional) GUI will not be compiled."
1404	fi
1405
1406	# COMPILE CHECK_NAMELIST_FILES
1407	printf "\n\n"
1408	echo " *** compiling check_namelist_files ..."
1409
1410	check_depository_path=${local_source_path}/../UTIL
1411	cd $check_depository_path
1412	mkdir check_tmp
1413	mv ${local_source_path}/${mainprog}_sources_check.tar ./check_tmp
1414	cd check_tmp
1415	tar -xf ${mainprog}_sources_check.tar
1416	rm -rf ${mainprog}_sources_check.tar
1417
1418	copts_check="-cpp -D_parallel -D__check"
1419	make -f Makefile_check $make_options F90=$compiler_name_ser COPT="$copts_check"
1420
1421	tar -cf check_namelist_files.tar Makefile_check check_namelist_files.x .f90 .o *.mod
1422	mv check_namelist_files.tar $check_depository_path
1423	mv check_namelist_files.x $PALM_BIN
1424	cd $check_depository_path
1425	rm -rf check_tmp
1426
1427	fi
1428	fi
1429	done
1430
1431
1432	if [[ $host_found = false ]]
1433	then
1434	if [[ $host = all ]]
1435	then
1436	printf "\n +++ no hosts found in configuration file"
1437	else
1438	printf "\n +++ host \"$host\" not found in configuration file"
1439	fi
1440	locat=config_file; exit
1441	fi
1442
1443
1444
1445	# FINAL WORK
1446	rm -f hosts_found_in_config_file
1447

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |