Home

Context Navigation

source: palm/trunk/SCRIPTS/mbuild @ 798

Last change on this file since 798 was 793, checked in by maronga, 12 years ago
GUI for mrun added
Property svn:keywords set to `Id Rev`
File size: 49.0 KB

Line
1	#!/bin/ksh
2	# mbuild - script for compiling the PALM code and its utility programs
3	# $Id: mbuild 793 2011-12-12 15:15:24Z maronga $
4
5	# Procedure to compile code on local and remote hosts using the
6	# make-mechanism. The source code must be provided on the local host.
7
8	# Last changes:
9	# 06/05/02 - Siggi - start development
10	# 12/06/02 - Siggi - first version finished
11	# 12/09/02 - Siggi - ibmh (hanni.hlrn.de) included
12	# 19/12/02 - Siggi - ibmb included
13	# 05/02/03 - Siggi - hostname nobela included
14	# 04/03/03 - Siggi - host nech included
15	# 06/03/03 - Siggi - make_call_string is echoed without '' to
16	# file LAST_MAKE_CALL (otherwise error on NEC, because
17	# '' are part of compiler options
18	# 16/03/03 - Siggi - Two underscores are placed in front of every define
19	# string, in case that palm.f90 version contains
20	# such strings
21	# 16/04/03 - Siggi - First extensions for linux machines
22	# 24/06/03 - Siggi - host orkan included
23	# 17/07/03 - Siggi - IP adress set to new "cross" machine at DKRZ
24	# 24/07/03 - Siggi - host maestro admitted
25	# 06/08/03 - Siggi - host gregale admitted
26	# 05/11/03 - Siggi - hosts irifi and quanero are now belonging to lcmuk
27	# 19/11/03 - Heiko - on lcmuk, mbuild does not tar the *.i files
28	# 08/01/04 - Siggi - additional preprocessor directive for ibm included
29	# (-D$OMP=OMP) in order to avoid problems with
30	# OMP_NUM_THREADS
31	# 09/01/04 - Siggi - action above cancelled
32	# 28/01/04 - Siggi - action above re-cancelled
33	# 08/03/04 - Siggi - host scirocco admitted
34	# 26/03/04 - Siggi - .o and .mod files are also deleted in depository, if
35	# the respective .f90 file is not listed in the makefile
36	# and deletion is demanded by the user
37	# 12/04/04 - Siggi - scp2 instead of scp used for transfer from decalpha
38	# due to error in ssh installation (otherwise a prompt
39	# for the password appears)
40	# 23/07/04 - Siggi - changes due to the new berni configuration
41	# (federation switch)
42	# 08/09/04 - Siggi - hanni IP address changed to 130.75.4.10
43	# 23/09/04 - Joerg - correction of IP-Address for 'cross' (DKRZ)
44	# 09/03/05 - Siggi - on nech, mbuild does not tar the *.i files
45	# 31/03/05 - Siggi - mbuild does not tar *.i files any more
46	# 24/04/05 - Siggi - netcdf support on lcmuk
47	# 25/04/05 - Siggi - netcdf support on gfdl3 (decalpha)
48	# 12/05/05 - Siggi - netcdf support on ibm
49	# set OBJECT_MODE=64 for compiling on ibmb, ibmh
50	# 18/05/05 - Siggi - netcdf support on nec
51	# 19/05/05 - Siggi - IP addres 134.75.155.74 changed to 165.132.26.56
52	# 23/05/05 - Siggi - netcdf support on ibms
53	# 01/06/05 - Siggi - reset of cpp_options to "" on lcmuk
54	# 30/06/05 - Siggi - netcdf support on bora
55	# 20/10/05 - Siggi - update of netcdf-version on decalpha (gfdl3)
56	# 04/11/05 - Siggi - netcdf 3.6.0-p1 on ibmh/ibmb
57	# 30/12/05 - Siggi - change of IP adresses in subnet 130.75.105
58	# host gfdl5 (ibmy) admitted
59	# 10/01/06 - Siggi - cpp directive for NetCDF 64bit support
60	# 20/01/06 - Siggi - cpp directive for ibmy
61	# 09/02/06 - Marcus- compile only once on lcmuk (as on ibmh/ibmb)
62	# 10/02/06 - Siggi - modifications for scp on decalpha
63	# 13/04/06 - Siggi - ostria admitted
64	# 19/04/06 - Siggi - preprocessor directive -D$OMP=OMP for ibm removed
65	# 23/05/05 - Siggi - lctit (SUN Fire X4600) admitted
66	# 29/05/05 - Siggi - atmos (lcide) admitted
67	# 23/08/06 - Siggi - netcdf support for scirocco (notebook)
68	# 24/11/06 - Siggi - breva and levanto admitted
69	# 07/02/07 - Siggi - adapted for RIAM (neck)
70	# 10/02/07 - Siggi - all hpmuk-related code removed
71	# 02/03/07 - Siggi - compilation of utility programs and transfer of
72	# scripts to remote hosts added (option -u)
73	# 14/03/07 - Siggi - fimm admitted, revision number added to terminal
74	# output
75	# 16/03/07 - Siggi - adjustments (netcdf) for lctit
76	# adjustments for running under pdksh, local ip-addres
77	# is not determined any more
78	# 30/03/07 - Siggi - cpp-directives/options + netcdf-options are read
79	# from configuration file
80	# host identifier (local_host) is read from config file
81	# 10/10/07 - Siggi - bugfix: handling of comment lines
82	# 18/07/08 - Siggi - adapted for lcsgih
83	# 21/07/08 - Siggi - mainprog (executable) is added to the tar-file
84	# ({mainprog}_current_version)
85	# 02/10/08 - Siggi - adapted for lcxt4
86	# 14/11/08 - Siggi - update mechanism completely revised: source tarfile
87	# remains in source directory, one depository per block
88	# (given in the config-file) is created, allways all
89	# files from the source directory are copied to the
90	# respective depository, no additional file checks are
91	# done any more (version 2.1)
92	# 13/01/09 - Marcus- re-enable compilation more than once on lcmuk (as on
93	# other machines)
94	# 21/03/09 - Siggi - -u copies also copies process_dvr_output and
95	# .dvrserver.config
96	# 21/04/09 - Siggi - adjustments for new IBM at DKRZ, which is now ibmh
97	# 25/08/09 - BjornM- adapted for lck
98	# 01/12/09 - BjornM- re-adjustments for lcxt4
99	# 01/02/10 - Siggi - adjustments for lcxt5m
100	# 03/02/10 - Siggi - make options (mopts) to be set by configuration file
101	# implemented, remoted mode option -r completely
102	# removed, t3e related parts removed
103	# 26/02/10 - BjornM- re-adjustments for lcxt4 (new modules)
104	# 01/03/10 - Siggi - mpilib replaced by modules: explicit module settings
105	# removed; modules should now be given in the
106	# configuration file
107	# 02/03/10 - Siggi - utility programs are created separately for each
108	# block in the configuration file,
109	# parallel make for utility programs
110	# 12/03/10 - Siggi - bugfix: remode_md was given a wrong value
111	# 16/08/10 - BjornM- bugfix: call of modules on local host, new workaround
112	# for lcxt4
113	# 07/09/10 - Siggi - bugfix for wrong netcdf/3.6.3 module on lcsgi
114	# 08/12/10 - Siggi - initialization of the module command changed for
115	# SGI-ICE/lcsgi
116	# adjustments for Kyushu Univ. (lcrte, ibmku)
117	# 14/12/10 - Siggi - adjustments for new Tsubame system at Tokyo
118	# institute of technology (lctit)
119	# 04/03/11 - BjornM- re-adjustments for lcxt4
120	# 06/03/11 - Siggi - adjustments for ibmkisti
121	# 03/04/11 - Micha - added lckordi
122	# 17/08/11 - Siggi - HLRN access via hicegate0 (130.75.4.101)
123	# 27/11/11 - Siggi - Bugfix for make options setting (-j)
124	# 12/12/11 - BjornM- added mrun GUI to ulitity programs
125
126
127
128	# VARIABLE DECLARATIONS + DEFAULT VALUES
129	compile_utility_programs=false
130	config_file=.mrun.config
131	fimm=false
132	host=all
133	host_found=false
134	locat=normal
135	makefile=""
136	module_calls=""
137	scirocco=false
138	silent=false
139	suf=f90
140	update=false
141	working_directory=`pwd`
142
143	typeset -i ih ihost=0
144
145	typeset -R30 calltime
146	typeset -L20 column1
147	typeset -L50 column2
148	typeset -L70 column3
149	typeset -L40 version="MBUILD 2.1 Rev$Rev: 793 $"
150
151	# ERROR HANDLING
152	# IN CASE OF EXIT:
153	trap 'rm -rf $working_directory/tmp_mbuild
154	if [[ $locat != normal ]]
155	then
156	printf "\n\n +++ mbuild killed \n\n"
157	else
158	printf "\n\n *** mbuild finished \n\n"
159	fi' exit
160
161
162	# IN CASE OF TERMINAL-BREAK:
163	trap 'rm -rf $working_directory/tmp_mbuild
164	printf "\n\n +++ mbuild killed by \"^C\" \n\n"
165	exit
166	' 2
167
168
169	tmp_mbuild=${working_directory}/tmp_mbuild
170
171	# READ SHELLSCRIPT-OPTIONS
172	while getopts :c:h:m:s:u option
173	do
174	case $option in
175	(c) config_file=$OPTARG;;
176	(h) host=$OPTARG;;
177	(m) makefile=$OPTARG;;
178	(s) suf=$OPTARG;;
179	(u) compile_utility_programs=true;;
180	(\?) printf "\n +++ unknown option $OPTARG \n";
181	locat=parameter; exit;;
182	esac
183	done
184
185
186
187	# CHECK, IF CONFIGURATION-FILE EXISTS
188	if [[ ! -f $config_file ]]
189	then
190	printf "\n +++ configuration file: "
191	printf "\n $config_file"
192	printf "\n does not exist"
193	locat=configuration; exit
194	fi
195
196
197
198	# DETERMINE THE LOCAL HOST
199	local_host_real_name=$(hostname)
200	# local_addres=$(nslookup `hostname` 2>&1 \| grep "Address:" \| tail -1 \| awk '{print $2}')
201
202
203
204	# DETERMINE HOST-IDENTIFIER (local_host) FROM THE CONFIG-FILE
205	line=""
206	grep "%host_identifier" $config_file > $tmp_mbuild
207	while read line
208	do
209	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
210	then
211	HOSTNAME=`echo $line \| cut -d" " -s -f2`
212	host_identifier=`echo $line \| cut -d" " -s -f3`
213	if [[ $local_host_real_name = $HOSTNAME ]]
214	then
215	local_host=$host_identifier
216	break
217	fi
218	fi
219	done < $tmp_mbuild
220
221	if [[ "$local_host" = "" ]]
222	then
223	printf "\n +++ no host identifier found in configuration file \"$config_file\""
224	printf "\n for local host \"$local_host_real_name\"."
225	printf "\n Please add line"
226	printf "\n \"\%host_identifier $local_host_real_name <identifier>\""
227	printf "\n to the configuration file."
228	locat=local_host; exit
229	fi
230
231
232
233	[[ $local_host_real_name = scirocco ]] && scirocco=true
234	[[ $local_host_real_name = fimm.bccs.uib.no ]] && fimm=true
235
236
237
238	if [[ $local_host != ibms ]]
239	then
240	config_file=$PWD/$config_file
241	else
242	config_file=`pwd`/$config_file
243	fi
244
245
246
247	# DETERMINE USER NAME ON LOCAL HOST FROM THE CONFIG-FILE
248	line=""
249	grep " $local_host" $config_file \| grep "%remote_username" > $tmp_mbuild
250	while read line
251	do
252	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
253	then
254	local_username=`echo $line \| cut -d" " -s -f2`
255	fi
256	done < $tmp_mbuild
257
258
259	if [[ "$local_username" = "" ]]
260	then
261	printf "\n +++ no user name found in configuration file"
262	printf "\n for local host \"$local_host\" "
263	locat=config_file; exit
264	fi
265
266
267	# DETERMINE LOCAL SOURCE-CODE PATH.
268	# FIRST CHECK, IF A GLOBAL SOURCE-CODE PATH HAS BEEN DECLARED FOR ALL HOSTS.
269	# THEREFORE, FIRST SET ALL GLOBAL VARIABLES DECLARED IN THE CONFIG-FILE,
270	# BECAUSE THEY MAY BE USED AS PART OF THE PATH NAME.
271	line=""
272	grep "%" $config_file > $tmp_mbuild
273	while read line
274	do
275	if [[ "$line" != "" && "$(echo $line \| cut -d" " -s -f3)" = "" && $(echo $line \| cut -c1) != "#" ]]
276	then
277	var=`echo $line \| cut -d" " -s -f1 \| cut -c2-`
278	value=`echo $line \| cut -d" " -s -f2`
279	eval export $var=\$value
280	fi
281	done < $tmp_mbuild
282
283	# NOW CHECK, IF A GLOBAL SOURCE-CODE-PATH HAS BEEN DECLARED
284	line=""
285	grep "%source_path" $config_file > $tmp_mbuild
286	while read line
287	do
288	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
289	then
290	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
291	then
292	global_source_path=`echo $line \| cut -d" " -s -f2`
293	fi
294	fi
295	done < $tmp_mbuild
296
297	line=""
298	grep " $local_host" $config_file \| grep "%source_path" > $tmp_mbuild
299	while read line
300	do
301	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
302	then
303	local_source_path=`echo $line \| cut -d" " -s -f2`
304	fi
305	done < $tmp_mbuild
306
307	if [[ "$local_source_path" = "" ]]
308	then
309	if [[ "$global_source_path" != "" ]]
310	then
311	local_source_path=$global_source_path
312	else
313	printf "\n +++ no source path found in configuration file"
314	printf "\n for local host \"$local_host\" "
315	printf "\n please set \"\%source_path\" in configuration file"
316	locat=config_file; exit
317	fi
318	fi
319	eval local_source_path=$local_source_path
320	eval local_source_path=$local_source_path
321
322
323
324	# DETERMINE GLOBAL DEPOSITORY-PATH
325	line=""
326	grep "%depository_path" $config_file > $tmp_mbuild
327	while read line
328	do
329	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
330	then
331	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
332	then
333	global_depository_path=`echo $line \| cut -d" " -s -f2`
334	fi
335	fi
336	done < $tmp_mbuild
337
338
339
340	# CHECK, IF A MAIN PROGRAM HAS BEEN DEFINED IN THE CONFIG-FILE
341	if [[ $(grep -c "%mainprog" $config_file) != 1 ]]
342	then
343	printf "\n +++ no main program or more than one main program defined"
344	printf "\n in configuration file"
345	locat=configuration; exit
346	else
347	line=`grep "%mainprog" $config_file`
348	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
349	then
350	printf "\n +++ no main program defined in configuration file"
351	locat=configuration; exit
352	fi
353	mainprog=`echo $line \| cut -d" " -s -f2 \| cut -d"." -f1`
354	fi
355
356
357
358	# CHECK IF MAKEFILE EXITS
359	[[ "$makefile" = "" ]] && makefile=$local_source_path/Makefile
360	if [[ ! -f $makefile ]]
361	then
362	printf "\n +++ makefile: "
363	printf "\n $makefile"
364	printf "\n does not exist"
365	locat=makefile; exit
366	fi
367
368
369	# HEADER-OUTPUT (PART1: MESSAGES CONCERNING THE LOCAL HOST)
370	calltime=$(date)
371	printf "\n"
372	printf "#------------------------------------------------------------------------# \n"
373	printf "\| $version$calltime \| \n"
374	printf "\| \| \n"
375	column1="called on:"; column2=$local_host_real_name
376	printf "\| $column1$column2 \| \n"
377	column1="local username:"; column2=$local_username
378	printf "\| $column1$column2 \| \n"
379	column1="local IP-addres:"; column2=$local_addres
380	printf "\| $column1$column2 \| \n"
381	column1="config file:"; column2=$config_file
382	printf "\| $column1$column2 \| \n"
383	column1="makefile:"; column2=$makefile
384	printf "\| $column1$column2 \| \n"
385	column1="local source path:"; column2=$local_source_path
386	printf "\| $column1$column2 \| \n"
387	printf "#------------------------------------------------------------------------# \n"
388
389	# printf "\| \| \n"
390
391
392	if [[ $compile_utility_programs = false ]]
393	then
394
395	# IN ANY CASE, GIVE ALL FILES WRITE-PERMIT, IN ORDER TO AVOID PROBLEMS
396	# WITH OVERWRITING FILES ON THE REMOTE HOST
397	cd $local_source_path
398	printf "\n\n *** tar of makefile and source files in $local_source_path"
399	tar -cf ${mainprog}_sources.tar Makefile *.$suf
400	printf "\n"
401
402	fi
403
404
405
406	# GET CONFIRMATION TO CONTINUE
407	if [[ $host = all ]]
408	then
409	printf "\n *** updates will be made for ALL hosts found in"
410	printf "\n the configuration file"
411	else
412	printf "\n *** update will be made for host \"$host\" "
413	fi
414
415	if [[ $silent = false ]]
416	then
417	answer=dummy
418	printf "\n\n"
419	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
420	do
421	printf " >>> continue (y/n) ? "
422	read answer
423	done
424	if [[ $answer = n \|\| $answer = N ]]
425	then
426	locat=user_abort; exit
427	fi
428	fi
429
430
431
432
433	# GENERIERUNG DER AKTUELLEN MODELLVERSION FUER ALLE RECHNER-/UEBERSETZUNGS-
434	# VERSIONEN, DIE IN DER KONFIGURATIONSDATEI GEFUNDEN WERDEN
435	printf "\n *** scanning configuration file for host(s) ..."
436
437	grep %fopts $config_file > $tmp_mbuild
438	while read line
439	do
440	# KOMMENTARZEILEN UEBERSPRINGEN
441	[[ $(echo $line \| cut -c1) = "#" ]] && continue
442	(( ihost = ihost + 1 ))
443	hostline[$ihost]="$line"
444	done < $tmp_mbuild
445
446
447	while (( ih < ihost ))
448	do
449
450	(( ih = ih + 1 ))
451
452	# REMOTE-RECHNER UND UEBERSETZUNGS-VERSION FESTSTELLEN
453	# NUR WEITERMACHEN, WENN ENTSPRECHENDER REMOTE-RECHNER MITTELS
454	# SHELLSCRIPT-OPTION AUCH AUSGEWAEHLT WURDE
455	remote_host_string=`echo ${hostline[$ih]} \| cut -d" " -s -f3-`
456	remote_host=`echo $remote_host_string \| cut -d" " -f1`
457	if [[ $host != all ]]
458	then
459	[[ $remote_host != $host ]] && continue
460	fi
461	host_found=true
462	condition1=`echo $remote_host_string \| cut -d" " -s -f2`
463	if [[ $condition1 = $remote_host ]]
464	then
465	condition1=""
466	else
467	condition2=`echo $remote_host_string \| cut -d" " -s -f3`
468	fi
469
470	modules=""
471	netcdf_inc=""
472	netcdf_lib=""
473	make_options=""
474
475	# IP-ADRESSE DES REMOTE-RECHNERS BESTIMMEN
476	case $remote_host in
477	(lckordi) remote_adress=210.219.61.8;;
478	(lcmuk) remote_addres=130.75.105.2;;
479	(lcrte) remote_addres=133.5.185.60;;
480	(lcsgib) remote_addres=130.73.232.102;;
481	(lcsgih) remote_addres=130.75.4.101;;
482	(lck) remote_addres=165.132.26.61;;
483	(lctit) remote_addres=10.1.6.170;;
484	(lcxt4) remote_addres=129.177.20.113;;
485	(lcxt5m) remote_addres=193.166.211.144;;
486	(decalpha) remote_addres=165.132.26.56;;
487	(ibmh) remote_addres=136.172.40.15;;
488	(ibmkisti) remote_addres=150.183.146.24;;
489	(ibmku) remote_addres=133.5.4.129;;
490	(ibms) remote_addres=150.183.5.101;;
491	(ibmy) remote_addres=165.132.26.58;;
492	(nech) remote_addres=136.172.44.192;;
493	(neck) remote_addres=133.5.178.11;;
494	(ground.yonsei.ac.kr) remote_addres=134.75.155.33;;
495	(*) if [[ $local_host != $remote_host ]]
496	then
497	printf "\n +++ remote host \"$remote_host\" unknown";
498	printf "\n please inform PALM group support!"
499	fi;;
500	esac
501
502
503	# REMOTE-USERNAMEN ERMITTELN
504	line=""
505	found=false
506	grep "$remote_host_string" $config_file \| grep "%remote_username" > $tmp_mbuild
507	while read line1
508	do
509
510	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
511	then
512	line="$line1"
513	fi
514
515	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
516	then
517	remote_username=`echo $line \| cut -d" " -s -f2`
518	found=true
519	fi
520
521	done < $tmp_mbuild
522
523	if [[ $found = false ]]
524	then
525	printf "\n +++ no remote username found in configuration file"
526	printf "\n for \"$remote_host_string\" "
527	locat=config_file; exit
528	fi
529
530
531	# REMOTE-QUELLTEXTPFAD ERMITTELN
532	line=""
533	remote_source_path=""
534	grep "$remote_host_string" $config_file \| grep "%source_path" > $tmp_mbuild
535	while read line1
536	do
537
538	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
539	then
540	line="$line1"
541	fi
542
543	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
544	then
545	remote_source_path=`echo $line \| cut -d" " -s -f2`
546	fi
547
548	done < $tmp_mbuild
549
550	if [[ "$remote_source_path" = "" ]]
551	then
552	if [[ "$global_source_path" != "" ]]
553	then
554	remote_source_path=$global_source_path
555	else
556	printf "\n +++ no source path found in configuration file"
557	printf "\n for \"$remote_host_string\" "
558	locat=config_file; exit
559	fi
560	fi
561
562	remote_ud=${remote_source_path}/../UTIL
563	remote_ud=$(eval echo $remote_ud)
564
565
566	# REMOTE-PFAD FUER MAKE-DEPOSITORY ERMITTELN
567	remote_md=""
568	line=""
569	grep "$remote_host_string" $config_file \| grep "%depository_path" > $tmp_mbuild
570	while read line1
571	do
572
573	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
574	then
575	line="$line1"
576	fi
577
578	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
579	then
580	remote_md=`echo $line \| cut -d" " -s -f2`
581	fi
582
583	done < $tmp_mbuild
584
585	if [[ "$remote_md" = "" ]]
586	then
587	if [[ "$global_depository_path" != "" ]]
588	then
589	remote_md=$global_depository_path
590	else
591	printf "\n +++ no depository path found in configuration file"
592	printf "\n for \"$remote_host_string\" "
593	printf "\n please set \"\%depository_path\" in configuration file"
594	locat=config_file; exit
595	fi
596	fi
597
598	remote_md=$(eval echo $remote_md)
599	block=""
600	[[ "$condition1" != "" ]] && block=_$condition1
601	[[ "$condition2" != "" ]] && block=${block}_$condition2
602	remote_md=${remote_md}$block
603
604
605	# COMPILERNAMEN ERMITTELN
606	line=""
607	found=false
608	grep "$remote_host_string" $config_file \| grep "%compiler_name " > $tmp_mbuild
609	while read line1
610	do
611
612	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
613	then
614	line="$line1"
615	fi
616
617	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
618	then
619	compiler_name=`echo $line \| cut -d" " -s -f2`
620	found=true
621	fi
622
623	done < $tmp_mbuild
624
625	if [[ $found = false ]]
626	then
627	printf "\n +++ no compiler name found in configuration file"
628	printf "\n for \"$remote_host_string\" "
629	locat=config_file; exit
630	fi
631
632
633	# BEI BENUTZUNG EINES PARALLELEN COMPILERS MUSS AUCH EIN
634	# SERIELLER COMPILERNAME ERMITTELT WERDEN
635	if [[ $(echo $remote_host_string \| grep -c parallel) = 1 ]]
636	then
637	line=""
638	found=false
639	grep "$remote_host_string" $config_file \| grep "%compiler_name_ser" > $tmp_mbuild
640	while read line1
641	do
642
643	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
644	then
645	line="$line1"
646	fi
647
648	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
649	then
650	compiler_name_ser=`echo $line \| cut -d" " -s -f2`
651	found=true
652	fi
653
654	done < $tmp_mbuild
655
656	if [[ $found = false ]]
657	then
658	printf "\n +++ no serial compiler name found in configuration file"
659	printf "\n for \"$remote_host_string\" "
660	locat=config_file; exit
661	fi
662	else
663	compiler_name_ser=$compiler_name
664	fi
665
666
667
668	# PRAEPROZESSOR-OPTIONEN/DIREKTIVEN ERMITTELN
669	line=""
670	found=false
671	grep "$remote_host_string" $config_file \| grep "%cpp_options" > $tmp_mbuild
672	while read line1
673	do
674
675	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
676	then
677	line="$line1"
678	fi
679
680	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
681	then
682	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
683	cpp_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
684	found=true
685	fi
686
687	done < $tmp_mbuild
688
689	if [[ $found = false ]]
690	then
691	printf "\n +++ no preprocessor options found in configuration file"
692	printf "\n for \"$remote_host_string\" "
693	locat=config_file; exit
694	fi
695
696
697	# RECHNERSPEZIFISCHE CPP-DIREKTIVEN HINZUFUEGEN
698	for string in $remote_host_string
699	do
700	if [[ $(echo $remote_host \| cut -c1-2) = lc && $(echo $string \| cut -c1-2) = lc ]]
701	then
702	cpp_options="$cpp_options -D__lc "
703	elif [[ $(echo $remote_host \| cut -c1-3) = ibm && $(echo $string \| cut -c1-3) = ibm ]]
704	then
705	cpp_options="${cpp_options},-D__ibm"
706	elif [[ $(echo $remote_host \| cut -c1-3) = nec && $(echo $string \| cut -c1-3) = nec ]]
707	then
708	cpp_options="${cpp_options} -D__nec"
709	else
710	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
711	then
712	cpp_options="${cpp_options},-D__$string"
713	else
714	cpp_options="$cpp_options -D__$string "
715	fi
716	fi
717	done
718
719
720
721	# NETCDF-OPTIONEN ERMITTELN
722	line=""
723	grep "$remote_host_string" $config_file \| grep "%netcdf_inc" > $tmp_mbuild
724	while read line1
725	do
726
727	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
728	then
729	line="$line1"
730	fi
731
732	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
733	then
734	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
735	netcdf_inc=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
736	fi
737
738	done < $tmp_mbuild
739
740	line=""
741	grep "$remote_host_string" $config_file \| grep "%netcdf_lib" > $tmp_mbuild
742	while read line1
743	do
744
745	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
746	then
747	line="$line1"
748	fi
749
750	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
751	then
752	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
753	netcdf_lib=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
754	fi
755
756	done < $tmp_mbuild
757
758
759
760	# get make options
761	line=""
762	found=false
763	grep "$remote_host_string" $config_file \| grep "%mopts" > $tmp_mbuild
764	while read line1
765	do
766
767	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
768	then
769	line="$line1"
770	fi
771
772	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
773	then
774	# remove colons from directive string
775	make_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
776
777	fi
778
779	done < $tmp_mbuild
780
781
782
783	# COMPILEROPTIONEN ERMITTELN
784	line=""
785	found=false
786	grep "$remote_host_string" $config_file \| grep "%fopts" > $tmp_mbuild
787	while read line1
788	do
789
790	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
791	then
792	line="$line1"
793	fi
794
795	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
796	then
797	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
798	compiler_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
799	found=true
800
801	# NETCDF-INCLUDEVERZEICHNIS HINZUFUEGEN
802	compiler_options="$compiler_options $netcdf_inc"
803	fi
804
805	done < $tmp_mbuild
806
807	if [[ $found = false ]]
808	then
809	printf "\n +++ no compiler options found in configuration file"
810	printf "\n for \"$remote_host_string\" "
811	locat=config_file; exit
812	fi
813
814
815
816	# get modules to be loaded
817	line=""
818	grep "$remote_host_string" $config_file \| grep "%modules" > $tmp_mbuild
819	while read line1
820	do
821
822	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
823	then
824	line="$line1"
825	fi
826
827	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
828	then
829	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
830	modules=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
831	fi
832
833	done < $tmp_mbuild
834
835
836
837
838	# LADER-OPTIONEN ERMITTELN
839	line=""
840	found=false
841	grep "$remote_host_string" $config_file \| grep "%lopts" > $tmp_mbuild
842	while read line1
843	do
844
845	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
846	then
847	line="$line1"
848	fi
849
850	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
851	then
852	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
853	loader_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
854	found=true
855
856	# NETCDF-LIBRARY HINZUFUEGEN
857	loader_options="$loader_options $netcdf_lib"
858	fi
859
860	done < $tmp_mbuild
861
862	if [[ $found = false ]]
863	then
864	printf "\n +++ no loader options found in configuration file"
865	printf "\n for \"$remote_host_string\" "
866	locat=config_file; exit
867	fi
868
869
870	printf "\n\n#------------------------------------------------------------------------# \n"
871	if [[ $remote_host = $local_host ]]
872	then
873	column1="remote_host:"; column2="$remote_host (= local host!)"
874	else
875	column1="remote_host:"; column2=$remote_host
876	fi
877	printf "\| $column1$column2 \| \n"
878	printf "\| \| \n"
879	column1="conditions:"; column2="$condition1 $condition2"
880	printf "\| $column1$column2 \| \n"
881	column1="make depository:"; column2=$remote_md
882	printf "\| $column1$column2 \| \n"
883	line=$(echo "$remote_md" \| cut -c51-)
884	while [[ "$line" != "" ]]
885	do
886	column1=""
887	column2=$line
888	printf "\| $column1$column2 \| \n"
889	line=$(echo "$line" \| cut -c51-)
890	done
891	if [[ $compile_utility_programs = true ]]
892	then
893	column1="utility directory:"; column2=$remote_ud
894	printf "\| $column1$column2 \| \n"
895	fi
896	column1="username:"; column2=$remote_username
897	printf "\| $column1$column2 \| \n"
898	column1="addres:"; column2=$remote_addres
899	printf "\| $column1$column2 \| \n"
900	column1="compiler:"; column2=$compiler_name
901	printf "\| $column1$column2 \| \n"
902	if [[ $compile_utility_programs = true ]]
903	then
904	column1="serial compiler:"; column2=$compiler_name_ser
905	printf "\| $column1$column2 \| \n"
906	fi
907	if [[ "$make_options" != "" ]]
908	then
909	column1="make options:"; column2=$make_options
910	printf "\| $column1$column2 \| \n"
911	fi
912	column1="cpp options:"; column2=$cpp_options
913	printf "\| $column1$column2 \| \n"
914	line=$(echo "$cpp_options" \| cut -c51-)
915	while [[ "$line" != "" ]]
916	do
917	column1=""
918	column2=$line
919	printf "\| $column1$column2 \| \n"
920	line=$(echo "$line" \| cut -c51-)
921	done
922	column1="compiler options:"; column2=$compiler_options
923	printf "\| $column1$column2 \| \n"
924	line=$(echo "$compiler_options" \| cut -c51-)
925	while [[ "$line" != "" ]]
926	do
927	column1=""
928	column2=$line
929	printf "\| $column1$column2 \| \n"
930	line=$(echo "$line" \| cut -c51-)
931	done
932	column1="loader options:"; column2=$loader_options
933	printf "\| $column1$column2 \| \n"
934	line=$(echo "$loader_options" \| cut -c51-)
935	while [[ "$line" != "" ]]
936	do
937	column1=""
938	column2=$line
939	printf "\| $column1$column2 \| \n"
940	line=$(echo "$line" \| cut -c51-)
941	done
942	if [[ $modules != "" ]]
943	then
944	column1="modules to be load:"; column2=$modules
945	printf "\| $column1$column2 \| \n"
946	line=$(echo "$modules" \| cut -c51-)
947	while [[ "$line" != "" ]]
948	do
949	column1=""
950	column2=$line
951	printf "\| $column1$column2 \| \n"
952	line=$(echo "$line" \| cut -c51-)
953	done
954	fi
955	printf "#------------------------------------------------------------------------# \n"
956
957	if [[ $silent = false ]]
958	then
959	answer=dummy
960	printf "\n\n"
961	while [[ "$answer" != y && "$answer" != Y && "$answer" != c && "$answer" != C && "$answer" != s && "$answer" != S && "$answer" != a && "$answer" != A ]]
962	do
963	printf " >>> continue (y(es)/c(ontinue)/a(bort)/s(skip)) ? "
964	read answer
965	done
966	if [[ $answer = a \|\| $answer = A ]]
967	then
968	locat=user_abort; exit
969	fi
970	if [[ $answer = c \|\| $answer = C ]]
971	then
972	silent=true
973	fi
974	if [[ $answer = s \|\| $answer = S ]]
975	then
976	continue
977	fi
978	fi
979
980
981	# make on remote host
982	if [[ $remote_host != $local_host ]]
983	then
984
985	if [[ $compile_utility_programs = false ]]
986	then
987
988	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
989	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
990	echo " *** copying \"${mainprog}_sources.tar\" to \"${remote_addres}:${remote_md}/\" "
991	if [[ $remote_host != lctit ]]
992	then
993	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})"
994	else
995	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
996	# MIT SSH, DESHALB AUFRUF PER PIPE
997	print "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})" \| ssh ${remote_username}@${remote_addres} 2>&1
998	fi
999	if [[ $local_host = decalpha ]]
1000	then
1001	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
1002	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1003	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1004	remote_md=`echo $remote_md \| sed 's/\$HOME\///'`
1005	/bin/scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
1006	else
1007	scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
1008	fi
1009
1010
1011
1012	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
1013	echo " *** untar previous update on remote host, if existing"
1014	if [[ $remote_host != lctit ]]
1015	then
1016	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar"
1017	else
1018	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1019	# MIT SSH, DESHALB AUFRUF PER PIPE
1020	print "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
1021	fi
1022
1023
1024	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
1025	echo " *** untar actual sources on remote host"
1026	if [[ $remote_host != lctit ]]
1027	then
1028	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; tar -xf ${mainprog}_sources.tar"
1029	else
1030	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1031	# MIT SSH, DESHALB AUFRUF PER PIPE
1032	print "cd ${remote_md}; tar -xf ${mainprog}_sources.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
1033	fi
1034
1035
1036	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1037	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
1038	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
1039	# Z.B. DIE PFADE ZUM COMPILER)
1040	echo " *** execute \"make\" on remote host"
1041
1042
1043	# generate make call with make options
1044	if [[ $remote_host = nech ]]
1045	then
1046	make_call_string="sxmake $make_options PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1047	else
1048	make_call_string="make $make_options PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1049	fi
1050
1051	# generate command to load modules, if modules are given
1052	if [[ "$modules" != "" ]]
1053	then
1054	if [[ $remote_host = lctit ]]
1055	then
1056	module_calls=". $modules"
1057	else
1058	module_calls="module load ${modules};"
1059	fi
1060
1061	# bugfix for wrong netcdf module
1062	if [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
1063	then
1064	if [[ $(echo $module_calls \| grep -c netcdf/3.6.3-intel) != 0 ]]
1065	then
1066	module_calls="$module_calls export LD_LIBRARY_PATH=/sw/dataformats/netcdf/3.6.3-intel/lib:\$LD_LIBRARY_PATH;"
1067	fi
1068	fi
1069	else
1070	module_calls=""
1071	fi
1072
1073	if [[ $remote_host = ibmkisti \|\| $remote_host = ibms \|\| $remote_host = ibmy ]]
1074	then
1075
1076	ssh ${remote_username}@${remote_addres} "$module_calls cd ${remote_md}; echo '$make_call_string' > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
1077
1078	elif [[ $remote_host = ibmh ]]
1079	then
1080
1081	print "$module_calls export OBJECT_MODE=64; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1082
1083	elif [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
1084	then
1085
1086	# print ". /usr/share/modules/init/bash; $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1087	print "eval \`/sw/swdist/bin/modulesinit\`; $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1088
1089	elif [[ $remote_host = lctit ]]
1090	then
1091
1092	echo " " > ${remote_host}_last_make_protokoll
1093	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
1094	do
1095	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1096	done
1097
1098	elif [[ $remote_host = lcxt4 ]]
1099	then
1100
1101	ssh ${remote_username}@${remote_addres} ". /opt/modules/default/init/ksh; $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
1102
1103	else
1104
1105	print "cd $module_calls ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1106
1107	fi
1108
1109	if [[ $(grep -c MAKE_ERROR ${remote_host}_last_make_protokoll) != 0 ]]
1110	then
1111	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1112	if [[ $silent = false ]]
1113	then
1114	answer=dummy
1115	printf "\n"
1116	while [[ "$answer" != c && "$answer" != k ]]
1117	do
1118	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
1119	read answer
1120	if [[ "$answer" = l ]]
1121	then
1122	more ${remote_host}_last_make_protokoll
1123	fi
1124	done
1125	if [[ $answer = k ]]
1126	then
1127	locat=user_abort; exit
1128	fi
1129	fi
1130	fi
1131
1132
1133
1134	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
1135	printf "\n *** tar update on remote host ..."
1136	if [[ $remote_host != lctit ]]
1137	then
1138	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod"
1139	else
1140	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1141	# MIT SSH, DESHALB AUFRUF PER PIPE
1142	print "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod" \| ssh ${remote_username}@${remote_addres} 2>&1
1143	fi
1144
1145
1146	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
1147	# printf "\n *** \"make clean\" on remote host ..."
1148	# ssh ${remote_username}@${remote_addres} "cd ${remote_md}; make clean; rm ${mainprog}_sources.tar; rm *.f90 Makefile"
1149	# printf "\n"
1150
1151
1152
1153
1154	# GLEICHE AKTIONEN FUER DIE UTILITY-PROGRAMME DURCHFUEHREN
1155	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1156	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
1157	elif [[ $compile_utility_programs = true ]]
1158	then
1159
1160	printf "\n\n"
1161	echo " *** copying scripts and utility programs to \"${remote_addres}:${remote_ud}/\" "
1162	cd ${local_source_path}/../SCRIPTS
1163
1164	if [[ $remote_host != lctit ]]
1165	then
1166	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)"
1167	else
1168	# TIT ERLAUBT NUR DIE AUSFUEHRUNG GANZ BESTIMMTER KOMMANDOS
1169	# MIT SSH, DESHALB AUFRUF PER PIPE
1170	print "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)" \| ssh ${remote_username}@${remote_addres} 2>&1
1171	fi
1172
1173	# KOPIEREN DER SCRIPTE
1174	if [[ $local_host = decalpha ]]
1175	then
1176	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTAENDIGEN PFADES
1177	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1178	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1179	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
1180	/bin/scp batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
1181	else
1182	scp batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
1183	fi
1184
1185	cd - > /dev/null
1186	cd ${local_source_path}/../UTIL
1187
1188
1189	# KOPIEREN DER UTILITY-PROGRAMME
1190	if [[ $local_host = decalpha ]]
1191	then
1192	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
1193	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1194	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1195	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
1196	/bin/scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
1197	else
1198	scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
1199	fi
1200
1201
1202
1203	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1204	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
1205	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
1206	# Z.B. DIE PFADE ZUM COMPILER)
1207	echo " *** execute \"make\" on remote host"
1208
1209	if [[ $remote_host = nech ]]
1210	then
1211	make_call_string="sxmake $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1212	else
1213	make_call_string="make $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1214	fi
1215
1216	# generate command to load modules, if modules are given
1217	if [[ "$modules" != "" ]]
1218	then
1219	if [[ $remote_host = lctit ]]
1220	then
1221	module_calls=". $modules"
1222	else
1223	module_calls="module load ${modules};"
1224	fi
1225
1226	# bugfix for wrong netcdf module
1227	if [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
1228	then
1229	if [[ $(echo $module_calls \| grep -c netcdf/3.6.3-intel) != 0 ]]
1230	then
1231	module_calls="$module_calls export LD_LIBRARY_PATH=/sw/dataformats/netcdf/3.6.3-intel/lib:\$LD_LIBRARY_PATH;"
1232	fi
1233	fi
1234	else
1235	module_calls=""
1236	fi
1237
1238	if [[ $remote_host = ibms \|\| $remote_host = ibmy ]]
1239	then
1240
1241	ssh ${remote_username}@${remote_addres} "$module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR"
1242
1243	elif [[ $remote_host = ibmh ]]
1244	then
1245
1246	print "$module_calls export OBJECT_MODE=64; cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres}
1247
1248	elif [[ $remote_host = lctit ]]
1249	then
1250
1251	echo " " > ${remote_host}_last_make_protokoll
1252	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
1253	do
1254	print "$module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1255	done
1256
1257	elif [[ $remote_host = lcxt4 ]]
1258	then
1259
1260	ssh ${remote_username}@${remote_addres} ". /opt/modules/default/init/ksh; $module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
1261
1262	else
1263
1264	print "$module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1265
1266	fi
1267
1268	fi # ENDE UEBERSETZUNG DER UTILITY-PROGRAMME
1269
1270	rm -rf ${remote_host}_last_make_protokoll
1271
1272	# make on local host
1273	else
1274
1275	# workaround for lcxt4
1276	if [[ $remote_host = lcxt4 ]]
1277	then
1278	. /opt/modules/default/init/ksh
1279	fi
1280
1281	# first load modules, if given
1282	if [[ "$modules" != "" ]]
1283	then
1284	if [[ $remote_host = lctit ]]
1285	then
1286	. $modules
1287	else
1288	module load ${modules}
1289	fi
1290	fi
1291
1292
1293	if [[ $compile_utility_programs = false ]]
1294	then
1295
1296	# DEPOSITORY VERZEICHNIS ERZEUGEN, FALLS NOCH NICHT VORHANDEN
1297	eval remote_md=$remote_md
1298	if [[ ! -d $remote_md ]]
1299	then
1300	if mkdir $remote_md
1301	then
1302	printf "\n\n *** directory for make depository:"
1303	printf "\n $remote_md"
1304	printf "\n was created\n"
1305	else
1306	printf "\n +++ directory for make depository:"
1307	printf "\n $remote_md"
1308	printf "\n cannot be created"
1309	locat=local_depository_path; exit
1310	fi
1311	fi
1312
1313	# QUELLTEXT-DATEIEN AUS REPOSITORY INS DEPOSITORY KOPIEREN
1314	echo " "
1315	echo " *** updating sources in $remote_md"
1316	cd $remote_md
1317	cp $local_source_path/${mainprog}_sources.tar .
1318	tar xf ${mainprog}_sources.tar
1319
1320	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF LOKALEM RECHNER AUSFUEHREN
1321	echo " "
1322	echo " *** execute \"make\" on local host"
1323
1324	make $make_options PROG=$mainprog F90=$compiler_name COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options" 2>&1 \| tee ${remote_host}_last_make_protokoll
1325
1326	if [[ $? != 0 ]]
1327	then
1328	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1329	if [[ $silent = false ]]
1330	then
1331	answer=dummy
1332	printf "\n"
1333	while [[ "$answer" != c && "$answer" != k ]]
1334	do
1335	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
1336	read answer
1337	if [[ "$answer" = l ]]
1338	then
1339	more ${remote_host}_last_make_protokoll
1340	fi
1341	done
1342	if [[ $answer = k ]]
1343	then
1344	locat=user_abort; exit
1345	fi
1346	fi
1347	fi
1348
1349
1350	# TAR NEW VERSION ON LOCAL HOST
1351	printf "\n *** tar update on local host ..."
1352	tar -cf ${mainprog}_current_version.tar .$suf .o *.mod
1353
1354
1355	# COMPILE THE UTILITY PROGRAMS
1356	elif [[ $compile_utility_programs = true ]]
1357	then
1358	printf "\n\n"
1359	echo " *** compiling the utility programs ..."
1360	cd ${local_source_path}/../UTIL
1361
1362	# TOUCH FILES IN ORDER TO FORCE COMPILATION FOR EVERY BLOCK
1363	touch *.f90
1364	make $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options"
1365
1366	# check if qmake is available and compile mrungui in that case
1367	if which qmake >/dev/null; then
1368	cd mrungui
1369	touch *
1370	qmake
1371	make
1372	make clean
1373	rm Makefile
1374	cd ..
1375	else
1376	echo " +++ no qmake found. The mrun GUI (optional) cannot be compiled."
1377	fi
1378
1379
1380	cd - > /dev/null
1381	fi
1382
1383	fi
1384
1385	done
1386
1387
1388	if [[ $host_found = false ]]
1389	then
1390	if [[ $host = all ]]
1391	then
1392	printf "\n +++ no hosts found in configuration file"
1393	else
1394	printf "\n +++ host \"$host\" not found in configuration file"
1395	fi
1396	locat=config_file; exit
1397	fi
1398
1399
1400
1401	# FINAL WORK
1402	rm -f hosts_found_in_config_file
1403

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |