Home

Context Navigation

source: palm/trunk/SCRIPTS/mbuild @ 492

Last change on this file since 492 was 492, checked in by maronga, 14 years ago
bugfix in the UTIL Makefile
Property svn:keywords set to `Id Rev`
File size: 45.9 KB

Line
1	#!/bin/ksh
2	# mbuild - Programmuebersetzungsscript
3	# $Id: mbuild 492 2010-02-26 13:28:22Z maronga $
4
5	# Prozedur zur Uebersetzung von Programmteilen mittels make-Mechanismus
6	# auf einem Remote-Rechner, ausgehend von Quellcode auf einem lokalen
7	# Rechner
8
9	# Folgende Probleme existieren unter Linux, wenn keine AT&T-Korn-Shell
10	# verwendet wird:
11	# Wertzuweisungen an Variablen innerhalb von DO-Schleifen werden nicht
12	# nach aussen weitergegeben. "while read line" funktioniert nicht
13	# innerhalb einer Pipe.
14
15	# letzte Aenderung:
16	# 06/05/02 - Siggi - Beginn der Entwicklung
17	# 12/06/02 - Siggi - Abschluss der Entwicklungsarbeiten
18	# 23/06/02 - Siggi - voerst kein make-clean, Abbruch bei batch-mode
19	# 24/07/02 - Siggi - Keine Verwendung der temporaeren Datei tmp_mbuild
20	# unter linux mehr noetig, da nun AT&T-Korn-Shell
21	# benutzt wird
22	# 12/09/02 - Siggi - ibmh (hanni.hlrn.de) validiert
23	# 19/12/02 - Siggi - ibmb validiert
24	# 05/02/03 - Siggi - hostname nobela included
25	# 04/03/03 - Siggi - host nech included
26	# 06/03/03 - Siggi - make_call_string is echoed without '' to
27	# file LAST_MAKE_CALL (otherwise error on NEC, because
28	# '' are part of compiler options
29	# 16/03/03 - Siggi - Two underscores are placed in front of every define
30	# string, in case that palm.f90 version contains
31	# such strings
32	# 16/04/03 - Siggi - First extensions for linux machines
33	# 24/06/03 - Siggi - host orkan included
34	# 17/07/03 - Siggi - IP adress set to new "cross" machine at DKRZ
35	# 24/07/03 - Siggi - host maestro admitted
36	# 06/08/03 - Siggi - host gregale admitted
37	# 05/11/03 - Siggi - hosts irifi and quanero are now belonging to lcmuk
38	# 19/11/03 - Heiko - on lcmuk, mbuild does not tar the *.i files
39	# 08/01/04 - Siggi - additional preprocessor directive for ibm included
40	# (-D$OMP=OMP) in order to avoid problems with
41	# OMP_NUM_THREADS
42	# 09/01/04 - Siggi - action above cancelled
43	# 28/01/04 - Siggi - action above re-cancelled
44	# 08/03/04 - Siggi - host scirocco admitted
45	# 26/03/04 - Siggi - .o and .mod files are also deleted in depository, if
46	# the respective .f90 file is not listed in the makefile
47	# and deletion is demanded by the user
48	# 12/04/04 - Siggi - scp2 instead of scp used for transfer from decalpha
49	# due to error in ssh installation (otherwise a prompt
50	# for the password appears)
51	# 23/07/04 - Siggi - changes due to the new berni configuration
52	# (federation switch)
53	# 08/09/04 - Siggi - hanni IP address changed to 130.75.4.10
54	# 23/09/04 - Joerg - correction of IP-Address for 'cross' (DKRZ)
55	# 09/03/05 - Siggi - on nech, mbuild does not tar the *.i files
56	# 31/03/05 - Siggi - mbuild does not tar *.i files any more
57	# 24/04/05 - Siggi - netcdf support on lcmuk
58	# 25/04/05 - Siggi - netcdf support on gfdl3 (decalpha)
59	# 12/05/05 - Siggi - netcdf support on ibm
60	# set OBJECT_MODE=64 for compiling on ibmb, ibmh
61	# 18/05/05 - Siggi - netcdf support on nec
62	# 19/05/05 - Siggi - IP addres 134.75.155.74 changed to 165.132.26.56
63	# 23/05/05 - Siggi - netcdf support on ibms
64	# 01/06/05 - Siggi - reset of cpp_options to "" on lcmuk
65	# 30/06/05 - Siggi - netcdf support on bora
66	# 20/10/05 - Siggi - update of netcdf-version on decalpha (gfdl3)
67	# 04/11/05 - Siggi - netcdf 3.6.0-p1 on ibmh/ibmb
68	# 30/12/05 - Siggi - change of IP adresses in subnet 130.75.105
69	# host gfdl5 (ibmy) admitted
70	# 10/01/06 - Siggi - cpp directive for NetCDF 64bit support
71	# 20/01/06 - Siggi - cpp directive for ibmy
72	# 09/02/06 - Marcus- compile only once on lcmuk (as on ibmh/ibmb)
73	# 10/02/06 - Siggi - modifications for scp on decalpha
74	# 13/04/06 - Siggi - ostria admitted
75	# 19/04/06 - Siggi - preprocessor directive -D$OMP=OMP for ibm removed
76	# 23/05/05 - Siggi - lctit (SUN Fire X4600) admitted
77	# 29/05/05 - Siggi - atmos (lcide) admitted
78	# 23/08/06 - Siggi - netcdf support for scirocco (notebook)
79	# 24/11/06 - Siggi - breva and levanto admitted
80	# 07/02/07 - Siggi - adapted for RIAM (neck)
81	# 10/02/07 - Siggi - all hpmuk-related code removed
82	# 02/03/07 - Siggi - compilation of utility programs and transfer of
83	# scripts to remote hosts added (option -u)
84	# 14/03/07 - Siggi - fimm admitted, revision number added to terminal
85	# output
86	# 16/03/07 - Siggi - adjustments (netcdf) for lctit
87	# adjustments for running under pdksh, local ip-addres
88	# is not determined any more
89	# 30/03/07 - Siggi - cpp-directives/options + netcdf-options are read
90	# from configuration file
91	# host identifier (local_host) is read from config file
92	# 10/10/07 - Siggi - bugfix: handling of comment lines
93	# 18/07/08 - Siggi - adapted for lcsgih
94	# 21/07/08 - Siggi - mainprog (executable) is added to the tar-file
95	# ({mainprog}_current_version)
96	# 02/10/08 - Siggi - adapted for lcxt4
97	# 14/11/08 - Siggi - update mechanism completely revised: source tarfile
98	# remains in source directory, one depository per block
99	# (given in the config-file) is created, allways all
100	# files from the source directory are copied to the
101	# respective depository, no additional file checks are
102	# done any more (version 2.1)
103	# 13/01/09 - Marcus- re-enable compilation more than once on lcmuk (as on
104	# other machines)
105	# 21/03/09 - Siggi - -u copies also copies process_dvr_output and
106	# .dvrserver.config
107	# 21/04/09 - Siggi - adjustments for new IBM at DKRZ, which is now ibmh
108	# 25/08/09 - BjornM- adapted for lck
109	# 01/12/09 - BjornM- re-adjustments for lcxt4
110	# 01/02/10 - Siggi - adjustments for lcxt5m
111	# 03/02/10 - Siggi - make options (mopts) to be set by configuration file
112	# implemented, remoted mode option -r completely
113	# removed, t3e related parts removed
114	# 26/02/10 - BjornM- re-adjustments for lcxt4 (new modules)
115
116
117
118	# VARIABLENVEREINBARUNGEN + DEFAULTWERTE
119	compile_utility_programs=false
120	config_file=.mrun.config
121	fimm=false
122	host=all
123	host_found=false
124	locat=normal
125	makefile=""
126	scirocco=false
127	silent=false
128	suf=f90
129	update=false
130	working_directory=`pwd`
131
132	typeset -i ih ihost=0
133
134	typeset -R30 calltime
135	typeset -L20 column1
136	typeset -L50 column2
137	typeset -L70 column3
138	typeset -L40 version="MBUILD 2.1 Rev$Rev: 492 $"
139
140	# FEHLERBEHANDLUNG
141	# BEI EXIT:
142	trap 'rm -rf $working_directory/tmp_mbuild
143	if [[ $locat != normal ]]
144	then
145	printf "\n\n +++ mbuild killed \n\n"
146	else
147	printf "\n\n *** mbuild finished \n\n"
148	fi' exit
149
150
151	# BEI TERMINAL-BREAK:
152	trap 'rm -rf $working_directory/tmp_mbuild
153	printf "\n\n +++ mbuild killed by \"^C\" \n\n"
154	exit
155	' 2
156
157
158	tmp_mbuild=${working_directory}/tmp_mbuild
159
160	# SHELLSCRIPT-OPTIONEN EINLESEN
161	while getopts :c:h:m:s:u option
162	do
163	case $option in
164	(c) config_file=$OPTARG;;
165	(h) host=$OPTARG;;
166	(m) makefile=$OPTARG;;
167	(s) suf=$OPTARG;;
168	(u) compile_utility_programs=true;;
169	(\?) printf "\n +++ unknown option $OPTARG \n";
170	locat=parameter; exit;;
171	esac
172	done
173
174
175
176	# PRUEFEN, OB KONFIGURATIONS-DATEI VORHANDEN
177	if [[ ! -f $config_file ]]
178	then
179	printf "\n +++ configuration file: "
180	printf "\n $config_file"
181	printf "\n does not exist"
182	locat=configuration; exit
183	fi
184
185
186
187	# LOKALEN RECHNER ERMITTELN
188	local_host_real_name=$(hostname)
189	# local_addres=$(nslookup `hostname` 2>&1 \| grep "Address:" \| tail -1 \| awk '{print $2}')
190
191
192
193	# HOST-IDENTIFIER (local_host) AUS KONFIGURATIONSDATEI BESTIMMEN
194	line=""
195	grep "%host_identifier" $config_file > $tmp_mbuild
196	while read line
197	do
198	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
199	then
200	HOSTNAME=`echo $line \| cut -d" " -s -f2`
201	host_identifier=`echo $line \| cut -d" " -s -f3`
202	if [[ $local_host_real_name = $HOSTNAME ]]
203	then
204	local_host=$host_identifier
205	break
206	fi
207	fi
208	done < $tmp_mbuild
209
210	if [[ "$local_host" = "" ]]
211	then
212	printf "\n +++ no host identifier found in configuration file \"$config_file\""
213	printf "\n for local host \"$local_host_real_name\"."
214	printf "\n Please add line"
215	printf "\n \"\%host_identifier $local_host_real_name <identifier>\""
216	printf "\n to the configuration file."
217	locat=local_host; exit
218	fi
219
220
221
222	[[ $local_host_real_name = scirocco ]] && scirocco=true
223	[[ $local_host_real_name = fimm.bccs.uib.no ]] && fimm=true
224
225
226
227	if [[ $local_host != ibms ]]
228	then
229	config_file=$PWD/$config_file
230	else
231	config_file=`pwd`/$config_file
232	fi
233
234
235
236	# BENUTZERNAMEN AUF LOKALEM RECHNER AUS KONFIGURATIONSDATEI ERMITTELN
237	line=""
238	grep " $local_host" $config_file \| grep "%remote_username" > $tmp_mbuild
239	while read line
240	do
241	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
242	then
243	local_username=`echo $line \| cut -d" " -s -f2`
244	fi
245	done < $tmp_mbuild
246
247
248	if [[ "$local_username" = "" ]]
249	then
250	printf "\n +++ no user name found in configuration file"
251	printf "\n for local host \"$local_host\" "
252	locat=config_file; exit
253	fi
254
255
256	# LOKALEN QUELLTEXTPFAD ERMITTELN.
257	# ZUERST PRUEFEN, OB EIN GLOBALER QUELLTEXTPFAD FUER ALLE RECHNER
258	# VEREINBART WURDE.
259	# DAZU ZUNAECHST ALLE IN DER KONFIGURATIONSDATEI VEREINBARTEN GLOBALEN
260	# VARIABLEN SETZEN, WEIL DIESE EVTL. IN PFADNAMEN VERWENDET WERDEN
261	line=""
262	grep "%" $config_file > $tmp_mbuild
263	while read line
264	do
265	if [[ "$line" != "" && "$(echo $line \| cut -d" " -s -f3)" = "" && $(echo $line \| cut -c1) != "#" ]]
266	then
267	var=`echo $line \| cut -d" " -s -f1 \| cut -c2-`
268	value=`echo $line \| cut -d" " -s -f2`
269	eval export $var=\$value
270	# eval echo \" $var=\$$var \" # AUSGABE ZU TESTZWECKEN
271	fi
272	done < $tmp_mbuild
273
274	# NUN PRUEFEN, OB EIN GLOBALER QUELLTEXTPFAD VEREINBART WURDE
275	line=""
276	grep "%source_path" $config_file > $tmp_mbuild
277	while read line
278	do
279	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
280	then
281	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
282	then
283	global_source_path=`echo $line \| cut -d" " -s -f2`
284	fi
285	fi
286	done < $tmp_mbuild
287
288	line=""
289	grep " $local_host" $config_file \| grep "%source_path" > $tmp_mbuild
290	while read line
291	do
292	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
293	then
294	local_source_path=`echo $line \| cut -d" " -s -f2`
295	fi
296	done < $tmp_mbuild
297
298	if [[ "$local_source_path" = "" ]]
299	then
300	if [[ "$global_source_path" != "" ]]
301	then
302	local_source_path=$global_source_path
303	else
304	printf "\n +++ no source path found in configuration file"
305	printf "\n for local host \"$local_host\" "
306	printf "\n please set \"\%source_path\" in configuration file"
307	locat=config_file; exit
308	fi
309	fi
310	eval local_source_path=$local_source_path
311	eval local_source_path=$local_source_path
312
313
314
315	# GLOBALEN DEPOSITORY-PFAD ERMITTELN
316	line=""
317	grep "%depository_path" $config_file > $tmp_mbuild
318	while read line
319	do
320	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
321	then
322	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
323	then
324	global_depository_path=`echo $line \| cut -d" " -s -f2`
325	fi
326	fi
327	done < $tmp_mbuild
328
329
330
331	# PRUEFEN, OB IN KONFIGURATIONSDATEI EIN HAUPTPROGRAMM
332	# VEREINBART WURDE
333	if [[ $(grep -c "%mainprog" $config_file) != 1 ]]
334	then
335	printf "\n +++ no main program or more than one main program defined"
336	printf "\n in configuration file"
337	locat=configuration; exit
338	else
339	line=`grep "%mainprog" $config_file`
340	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
341	then
342	printf "\n +++ no main program defined in configuration file"
343	locat=configuration; exit
344	fi
345	mainprog=`echo $line \| cut -d" " -s -f2 \| cut -d"." -f1`
346	fi
347
348
349
350	# MAKEFILE vorhanden
351	[[ "$makefile" = "" ]] && makefile=$local_source_path/Makefile
352	if [[ ! -f $makefile ]]
353	then
354	printf "\n +++ makefile: "
355	printf "\n $makefile"
356	printf "\n does not exist"
357	locat=makefile; exit
358	fi
359
360
361	# HEADER-AUSGABE (TEIL1: MELDUNGEN UEBER LOKALEN RECHNER)
362	calltime=$(date)
363	printf "\n"
364	printf "#------------------------------------------------------------------------# \n"
365	printf "\| $version$calltime \| \n"
366	printf "\| \| \n"
367	column1="called on:"; column2=$local_host_real_name
368	printf "\| $column1$column2 \| \n"
369	column1="local username:"; column2=$local_username
370	printf "\| $column1$column2 \| \n"
371	column1="local IP-addres:"; column2=$local_addres
372	printf "\| $column1$column2 \| \n"
373	column1="config file:"; column2=$config_file
374	printf "\| $column1$column2 \| \n"
375	column1="makefile:"; column2=$makefile
376	printf "\| $column1$column2 \| \n"
377	column1="local source path:"; column2=$local_source_path
378	printf "\| $column1$column2 \| \n"
379	printf "#------------------------------------------------------------------------# \n"
380
381	# printf "\| \| \n"
382
383
384	if [[ $compile_utility_programs = false ]]
385	then
386
387	# IN JEDEM FALL ALLEN DATEIEN WRITE-PERMIT GEBEN, DAMIT ES AUF
388	# DEN REMOTE-RECHNERN NICHT EVTL. ZU PROBLEMEN BEIM UEBERSCHREIBEN KOMMT
389	cd $local_source_path
390	printf "\n\n *** tar of makefile and source files in $local_source_path"
391	tar -cf ${mainprog}_sources.tar Makefile *.$suf
392	printf "\n"
393
394	fi
395
396
397
398	# BESTAETIGUNG ZUM WEITERMACHEN EINHOLEN
399	if [[ $host = all ]]
400	then
401	printf "\n *** updates will be made for ALL hosts found in"
402	printf "\n the configuration file"
403	else
404	printf "\n *** update will be made for host \"$host\" "
405	fi
406
407	if [[ $silent = false ]]
408	then
409	answer=dummy
410	printf "\n\n"
411	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
412	do
413	printf " >>> continue (y/n) ? "
414	read answer
415	done
416	if [[ $answer = n \|\| $answer = N ]]
417	then
418	locat=user_abort; exit
419	fi
420	fi
421
422
423
424
425	# GENERIERUNG DER AKTUELLEN MODELLVERSION FUER ALLE RECHNER-/UEBERSETZUNGS-
426	# VERSIONEN, DIE IN DER KONFIGURATIONSDATEI GEFUNDEN WERDEN
427	printf "\n *** scanning configuration file for host(s) ..."
428
429	grep %fopts $config_file > $tmp_mbuild
430	while read line
431	do
432	# KOMMENTARZEILEN UEBERSPRINGEN
433	[[ $(echo $line \| cut -c1) = "#" ]] && continue
434	(( ihost = ihost + 1 ))
435	hostline[$ihost]="$line"
436	done < $tmp_mbuild
437
438
439	while (( ih < ihost ))
440	do
441
442	(( ih = ih + 1 ))
443
444	# REMOTE-RECHNER UND UEBERSETZUNGS-VERSION FESTSTELLEN
445	# NUR WEITERMACHEN, WENN ENTSPRECHENDER REMOTE-RECHNER MITTELS
446	# SHELLSCRIPT-OPTION AUCH AUSGEWAEHLT WURDE
447	remote_host_string=`echo ${hostline[$ih]} \| cut -d" " -s -f3-`
448	remote_host=`echo $remote_host_string \| cut -d" " -f1`
449	if [[ $host != all ]]
450	then
451	[[ $remote_host != $host ]] && continue
452	fi
453	host_found=true
454	condition1=`echo $remote_host_string \| cut -d" " -s -f2`
455	if [[ $condition1 = $remote_host ]]
456	then
457	condition1=""
458	else
459	condition2=`echo $remote_host_string \| cut -d" " -s -f3`
460	fi
461
462	netcdf_inc=""
463	netcdf_lib=""
464
465	# IP-ADRESSE DES REMOTE-RECHNERS BESTIMMEN
466	case $remote_host in
467	(lcmuk) remote_addres=130.75.105.2;;
468	(lcsgib) remote_addres=130.73.232.102;;
469	(lcsgih) remote_addres=130.75.4.102;;
470	(lck) remote_addres=165.132.26.61;;
471	(lctit) remote_addres=172.17.75.161;;
472	(lcxt4) remote_addres=129.177.20.113;;
473	(lcxt5m) remote_addres=193.166.211.144;;
474	(decalpha) remote_addres=165.132.26.56;;
475	(ibmh) remote_addres=136.172.40.15;;
476	(ibms) remote_addres=150.183.5.101;;
477	(ibmy) remote_addres=165.132.26.58;;
478	(nech) remote_addres=136.172.44.192;;
479	(neck) remote_addres=133.5.178.11;;
480	(ground.yonsei.ac.kr) remote_addres=134.75.155.33;;
481	(*) if [[ $local_host != $remote_host ]]
482	then
483	printf "\n +++ remote host \"$remote_host\" unknown";
484	printf "\n please inform S. Raasch!"
485	fi;;
486	esac
487
488
489	# REMOTE-USERNAMEN ERMITTELN
490	line=""
491	found=false
492	grep "$remote_host_string" $config_file \| grep "%remote_username" > $tmp_mbuild
493	while read line1
494	do
495
496	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
497	then
498	line="$line1"
499	fi
500
501	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
502	then
503	remote_username=`echo $line \| cut -d" " -s -f2`
504	found=true
505	fi
506
507	done < $tmp_mbuild
508
509	if [[ $found = false ]]
510	then
511	printf "\n +++ no remote username found in configuration file"
512	printf "\n for \"$remote_host_string\" "
513	locat=config_file; exit
514	fi
515
516
517	# REMOTE-QUELLTEXTPFAD ERMITTELN
518	line=""
519	remote_source_path=""
520	grep "$remote_host_string" $config_file \| grep "%source_path" > $tmp_mbuild
521	while read line1
522	do
523
524	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
525	then
526	line="$line1"
527	fi
528
529	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
530	then
531	remote_source_path=`echo $line \| cut -d" " -s -f2`
532	fi
533
534	done < $tmp_mbuild
535
536	if [[ "$remote_source_path" = "" ]]
537	then
538	if [[ "$global_source_path" != "" ]]
539	then
540	remote_source_path=$global_source_path
541	else
542	printf "\n +++ no source path found in configuration file"
543	printf "\n for \"$remote_host_string\" "
544	locat=config_file; exit
545	fi
546	fi
547
548	remote_ud=${remote_source_path}/../UTIL
549	remote_ud=$(eval echo $remote_ud)
550
551
552	# REMOTE-PFAD FUER MAKE-DEPOSITORY ERMITTELN
553	remote_md=""
554	line=""
555	grep "$remote_host_string" $config_file \| grep "%depository_path" > $tmp_mbuild
556	while read line1
557	do
558
559	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
560	then
561	line="$line1"
562	fi
563
564	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
565	then
566	remote_md=`echo $line \| cut -d" " -s -f2`
567	fi
568
569	done < $tmp_mbuild
570
571	if [[ "$remote_md" = "" ]]
572	then
573	if [[ "$global_depository_path" != "" ]]
574	then
575	remote_md=$global_depository_path
576	else
577	printf "\n +++ no depository path found in configuration file"
578	printf "\n for \"$remote_host_string\" "
579	printf "\n please set \"\%depository_path\" in configuration file"
580	locat=config_file; exit
581	fi
582	fi
583
584	remote_md=$(eval echo $remote_md)
585	[[ "$condition1" != "" ]] && remote_md=${remote_md}_$condition1
586	[[ "$condition2" != "" ]] && remote_md=${remote_md}_$condition2
587
588
589	# COMPILERNAMEN ERMITTELN
590	line=""
591	found=false
592	grep "$remote_host_string" $config_file \| grep "%compiler_name " > $tmp_mbuild
593	while read line1
594	do
595
596	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
597	then
598	line="$line1"
599	fi
600
601	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
602	then
603	compiler_name=`echo $line \| cut -d" " -s -f2`
604	found=true
605	fi
606
607	done < $tmp_mbuild
608
609	if [[ $found = false ]]
610	then
611	printf "\n +++ no compiler name found in configuration file"
612	printf "\n for \"$remote_host_string\" "
613	locat=config_file; exit
614	fi
615
616
617	# BEI BENUTZUNG EINES PARALLELEN COMPILERS MUSS AUCH EIN
618	# SERIELLER COMPILERNAME ERMITTELT WERDEN
619	if [[ $(echo $remote_host_string \| grep -c parallel) = 1 ]]
620	then
621	line=""
622	found=false
623	grep "$remote_host_string" $config_file \| grep "%compiler_name_ser" > $tmp_mbuild
624	while read line1
625	do
626
627	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
628	then
629	line="$line1"
630	fi
631
632	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
633	then
634	compiler_name_ser=`echo $line \| cut -d" " -s -f2`
635	found=true
636	fi
637
638	done < $tmp_mbuild
639
640	if [[ $found = false ]]
641	then
642	printf "\n +++ no serial compiler name found in configuration file"
643	printf "\n for \"$remote_host_string\" "
644	locat=config_file; exit
645	fi
646	else
647	compiler_name_ser=$compiler_name
648	fi
649
650
651
652	# PRAEPROZESSOR-OPTIONEN/DIREKTIVEN ERMITTELN
653	line=""
654	found=false
655	grep "$remote_host_string" $config_file \| grep "%cpp_options" > $tmp_mbuild
656	while read line1
657	do
658
659	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
660	then
661	line="$line1"
662	fi
663
664	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
665	then
666	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
667	cpp_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
668	found=true
669	fi
670
671	done < $tmp_mbuild
672
673	if [[ $found = false ]]
674	then
675	printf "\n +++ no preprocessor options found in configuration file"
676	printf "\n for \"$remote_host_string\" "
677	locat=config_file; exit
678	fi
679
680
681	# RECHNERSPEZIFISCHE CPP-DIREKTIVEN HINZUFUEGEN
682	for string in $remote_host_string
683	do
684	if [[ $(echo $remote_host \| cut -c1-2) = lc && $(echo $string \| cut -c1-2) = lc ]]
685	then
686	cpp_options="$cpp_options -D__lc "
687	elif [[ $(echo $remote_host \| cut -c1-3) = ibm && $(echo $string \| cut -c1-3) = ibm ]]
688	then
689	cpp_options="${cpp_options},-D__ibm"
690	elif [[ $(echo $remote_host \| cut -c1-3) = nec && $(echo $string \| cut -c1-3) = nec ]]
691	then
692	cpp_options="${cpp_options} -D__nec"
693	else
694	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
695	then
696	cpp_options="${cpp_options},-D__$string"
697	else
698	cpp_options="$cpp_options -D__$string "
699	fi
700	fi
701	done
702
703
704
705	# NETCDF-OPTIONEN ERMITTELN
706	line=""
707	grep "$remote_host_string" $config_file \| grep "%netcdf_inc" > $tmp_mbuild
708	while read line1
709	do
710
711	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
712	then
713	line="$line1"
714	fi
715
716	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
717	then
718	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
719	netcdf_inc=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
720	fi
721
722	done < $tmp_mbuild
723
724	line=""
725	grep "$remote_host_string" $config_file \| grep "%netcdf_lib" > $tmp_mbuild
726	while read line1
727	do
728
729	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
730	then
731	line="$line1"
732	fi
733
734	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
735	then
736	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
737	netcdf_lib=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
738	fi
739
740	done < $tmp_mbuild
741
742
743
744	# get make options
745	line=""
746	found=false
747	grep "$remote_host_string" $config_file \| grep "%mopts" > $tmp_mbuild
748	while read line1
749	do
750
751	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
752	then
753	line="$line1"
754	fi
755
756	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
757	then
758	# remove colons from directive string
759	make_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
760
761	fi
762
763	done < $tmp_mbuild
764
765
766
767	# COMPILEROPTIONEN ERMITTELN
768	line=""
769	found=false
770	grep "$remote_host_string" $config_file \| grep "%fopts" > $tmp_mbuild
771	while read line1
772	do
773
774	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
775	then
776	line="$line1"
777	fi
778
779	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
780	then
781	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
782	compiler_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
783	found=true
784
785	# NETCDF-INCLUDEVERZEICHNIS HINZUFUEGEN
786	compiler_options="$compiler_options $netcdf_inc"
787	fi
788
789	done < $tmp_mbuild
790
791	if [[ $found = false ]]
792	then
793	printf "\n +++ no compiler options found in configuration file"
794	printf "\n for \"$remote_host_string\" "
795	locat=config_file; exit
796	fi
797
798
799
800	# MPI LIBRARY ERMITTELN
801	line=""
802	found=false
803	grep "$remote_host_string" $config_file \| grep "%mpilib" > $tmp_mbuild
804	while read line1
805	do
806
807	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
808	then
809	line="$line1"
810	fi
811
812	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
813	then
814	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
815	mpilib=`echo $line \| cut -d" " -s -f2`
816	found=true
817	fi
818
819	done < $tmp_mbuild
820
821	[[ $found = false ]] && mpilib=mpt
822
823
824
825
826	# LADER-OPTIONEN ERMITTELN
827	line=""
828	found=false
829	grep "$remote_host_string" $config_file \| grep "%lopts" > $tmp_mbuild
830	while read line1
831	do
832
833	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
834	then
835	line="$line1"
836	fi
837
838	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
839	then
840	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
841	loader_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
842	found=true
843
844	# NETCDF-LIBRARY HINZUFUEGEN
845	loader_options="$loader_options $netcdf_lib"
846	fi
847
848	done < $tmp_mbuild
849
850	if [[ $found = false ]]
851	then
852	printf "\n +++ no loader options found in configuration file"
853	printf "\n for \"$remote_host_string\" "
854	locat=config_file; exit
855	fi
856
857
858	printf "\n\n#------------------------------------------------------------------------# \n"
859	if [[ $remote_host = $local_host ]]
860	then
861	column1="remote_host:"; column2="$remote_host (= local host!)"
862	else
863	column1="remote_host:"; column2=$remote_host
864	fi
865	printf "\| $column1$column2 \| \n"
866	printf "\| \| \n"
867	column1="conditions:"; column2="$condition1 $condition2"
868	printf "\| $column1$column2 \| \n"
869	column1="make depository:"; column2=$remote_md
870	printf "\| $column1$column2 \| \n"
871	line=$(echo "$remote_md" \| cut -c51-)
872	while [[ "$line" != "" ]]
873	do
874	column1=""
875	column2=$line
876	printf "\| $column1$column2 \| \n"
877	line=$(echo "$line" \| cut -c51-)
878	done
879	if [[ $compile_utility_programs = true ]]
880	then
881	column1="utility directory:"; column2=$remote_ud
882	printf "\| $column1$column2 \| \n"
883	fi
884	column1="username:"; column2=$remote_username
885	printf "\| $column1$column2 \| \n"
886	column1="addres:"; column2=$remote_addres
887	printf "\| $column1$column2 \| \n"
888	column1="compiler:"; column2=$compiler_name
889	printf "\| $column1$column2 \| \n"
890	if [[ $compile_utility_programs = true ]]
891	then
892	column1="serial compiler:"; column2=$compiler_name_ser
893	printf "\| $column1$column2 \| \n"
894	fi
895	if [[ "$make_options" != "" ]]
896	then
897	column1="make options:"; column2=$make_options
898	printf "\| $column1$column2 \| \n"
899	fi
900	column1="cpp options:"; column2=$cpp_options
901	printf "\| $column1$column2 \| \n"
902	line=$(echo "$cpp_options" \| cut -c51-)
903	while [[ "$line" != "" ]]
904	do
905	column1=""
906	column2=$line
907	printf "\| $column1$column2 \| \n"
908	line=$(echo "$line" \| cut -c51-)
909	done
910	column1="compiler options:"; column2=$compiler_options
911	printf "\| $column1$column2 \| \n"
912	line=$(echo "$compiler_options" \| cut -c51-)
913	while [[ "$line" != "" ]]
914	do
915	column1=""
916	column2=$line
917	printf "\| $column1$column2 \| \n"
918	line=$(echo "$line" \| cut -c51-)
919	done
920	if [[ $( echo $remote_host \| cut -c1-5 ) = lcsgi ]]
921	then
922	column1="mpi library:"; column2=$mpilib
923	printf "\| $column1$column2 \| \n"
924	fi
925	column1="loader options:"; column2=$loader_options
926	printf "\| $column1$column2 \| \n"
927	line=$(echo "$loader_options" \| cut -c51-)
928	while [[ "$line" != "" ]]
929	do
930	column1=""
931	column2=$line
932	printf "\| $column1$column2 \| \n"
933	line=$(echo "$line" \| cut -c51-)
934	done
935	printf "#------------------------------------------------------------------------# \n"
936
937	if [[ $silent = false ]]
938	then
939	answer=dummy
940	printf "\n\n"
941	while [[ "$answer" != y && "$answer" != Y && "$answer" != c && "$answer" != C && "$answer" != s && "$answer" != S && "$answer" != a && "$answer" != A ]]
942	do
943	printf " >>> continue (y(es)/c(ontinue)/a(bort)/s(skip)) ? "
944	read answer
945	done
946	if [[ $answer = a \|\| $answer = A ]]
947	then
948	locat=user_abort; exit
949	fi
950	if [[ $answer = c \|\| $answer = C ]]
951	then
952	silent=false
953	fi
954	if [[ $answer = s \|\| $answer = S ]]
955	then
956	continue
957	fi
958	fi
959
960
961	# make on remote host
962	if [[ $remote_host != $local_host ]]
963	then
964
965	if [[ $compile_utility_programs = false ]]
966	then
967
968	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
969	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
970	echo " *** copying \"${mainprog}_sources.tar\" to \"${remote_addres}:${remote_md}/\" "
971	if [[ $remote_host != lctit ]]
972	then
973	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})"
974	else
975	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
976	# MIT SSH, DESHALB AUFRUF PER PIPE
977	print "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})" \| ssh ${remote_username}@${remote_addres} 2>&1
978	fi
979	if [[ $local_host = decalpha ]]
980	then
981	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
982	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
983	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
984	remote_md=`echo $remote_md \| sed 's/\$HOME\///'`
985	/bin/scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
986	else
987	scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
988	fi
989
990
991
992	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
993	echo " *** untar previous update on remote host, if existing"
994	if [[ $remote_host != lctit ]]
995	then
996	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar"
997	else
998	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
999	# MIT SSH, DESHALB AUFRUF PER PIPE
1000	print "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
1001	fi
1002
1003
1004	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
1005	echo " *** untar actual sources on remote host"
1006	if [[ $remote_host != lctit ]]
1007	then
1008	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; tar -xf ${mainprog}_sources.tar"
1009	else
1010	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1011	# MIT SSH, DESHALB AUFRUF PER PIPE
1012	print "cd ${remote_md}; tar -xf ${mainprog}_sources.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
1013	fi
1014
1015
1016	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1017	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
1018	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
1019	# Z.B. DIE PFADE ZUM COMPILER)
1020	echo " *** execute \"make\" on remote host"
1021
1022	if [[ $remote_host = nech ]]
1023	then
1024	make_call_string="sxmake $make_options PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1025	else
1026	make_call_string="make $make_options PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1027	fi
1028
1029	if [[ $remote_host = ibms \|\| $remote_host = ibmy ]]
1030	then
1031
1032	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; echo '$make_call_string' > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
1033
1034	elif [[ $remote_host = ibmh ]]
1035	then
1036
1037	print "export OBJECT_MODE=64; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1038
1039	elif [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
1040	then
1041
1042	print ". /usr/share/modules/init/bash; module load ifort/11.0.069; module load $mpilib; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1043	# print ". /usr/share/modules/init/bash; module load mvapich2/1.2rc1-intel; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1044	# print ". /usr/share/modules/init/bash; module load mvapich2; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1045
1046	elif [[ $remote_host = lctit ]]
1047	then
1048
1049	echo " " > ${remote_host}_last_make_protokoll
1050	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
1051	do
1052	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1053	done
1054
1055	elif [[ $remote_host = lcxt4 ]]
1056	then
1057
1058	print ". /opt/modules/default/init/ksh; module load Base-opts; module load modules; module load pmi; module load pgi; module load PrgEnv-pgi; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1059
1060	else
1061
1062	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1063
1064	fi
1065
1066	if [[ $(grep -c MAKE_ERROR ${remote_host}_last_make_protokoll) != 0 ]]
1067	then
1068	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1069	if [[ $silent = false ]]
1070	then
1071	answer=dummy
1072	printf "\n"
1073	while [[ "$answer" != c && "$answer" != k ]]
1074	do
1075	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
1076	read answer
1077	if [[ "$answer" = l ]]
1078	then
1079	more ${remote_host}_last_make_protokoll
1080	fi
1081	done
1082	if [[ $answer = k ]]
1083	then
1084	locat=user_abort; exit
1085	fi
1086	fi
1087	fi
1088
1089
1090
1091	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
1092	printf "\n *** tar update on remote host ..."
1093	if [[ $remote_host != lctit ]]
1094	then
1095	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod"
1096	else
1097	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1098	# MIT SSH, DESHALB AUFRUF PER PIPE
1099	print "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod" \| ssh ${remote_username}@${remote_addres} 2>&1
1100	fi
1101
1102
1103	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
1104	# printf "\n *** \"make clean\" on remote host ..."
1105	# ssh ${remote_username}@${remote_addres} "cd ${remote_md}; make clean; rm ${mainprog}_sources.tar; rm *.f90 Makefile"
1106	# printf "\n"
1107
1108
1109
1110
1111	# GLEICHE AKTIONEN FUER DIE UTILITY-PROGRAMME DURCHFUEHREN
1112	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1113	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
1114	elif [[ $compile_utility_programs = true ]]
1115	then
1116
1117	printf "\n\n"
1118	echo " *** copying scripts and utility programs to \"${remote_addres}:${remote_ud}/\" "
1119	cd ${local_source_path}/../SCRIPTS
1120
1121	if [[ $remote_host != lctit ]]
1122	then
1123	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)"
1124	else
1125	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1126	# MIT SSH, DESHALB AUFRUF PER PIPE
1127	print "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)" \| ssh ${remote_username}@${remote_addres} 2>&1
1128	fi
1129
1130	# KOPIEREN DER SCRIPTE
1131	if [[ $local_host = decalpha ]]
1132	then
1133	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
1134	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1135	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1136	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
1137	/bin/scp batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
1138	else
1139	scp batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
1140	fi
1141
1142	cd - > /dev/null
1143	cd ${local_source_path}/../UTIL
1144
1145
1146	# KOPIEREN DER UTILITY-PROGRAMME
1147	if [[ $local_host = decalpha ]]
1148	then
1149	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
1150	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1151	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1152	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
1153	/bin/scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
1154	else
1155	scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
1156	fi
1157
1158
1159
1160	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1161	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
1162	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
1163	# Z.B. DIE PFADE ZUM COMPILER)
1164	echo " *** execute \"make\" on remote host"
1165
1166	if [[ $remote_host = nech ]]
1167	then
1168	make_call_string="sxmake F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1169	else
1170	make_call_string="make F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1171	fi
1172
1173	if [[ $remote_host = ibms \|\| $remote_host = ibmy ]]
1174	then
1175
1176	ssh ${remote_username}@${remote_addres} "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR"
1177
1178	elif [[ $remote_host = ibmh ]]
1179	then
1180
1181	print "export OBJECT_MODE=64; cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres}
1182
1183	elif [[ $remote_host = lctit ]]
1184	then
1185
1186	echo " " > ${remote_host}_last_make_protokoll
1187	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
1188	do
1189	print "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1190	done
1191
1192	elif [[ $remote_host = lcxt4 ]]
1193	then
1194
1195	print ". /opt/modules/default/init/ksh; module load Base-opts; module load modules; module load pmi; module load pgi; module load PrgEnv-pgi; cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1196
1197	else
1198
1199	print "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1200
1201	fi
1202
1203	fi # ENDE UEBERSETZUNG DER UTILITY-PROGRAMME
1204
1205	rm -rf ${remote_host}_last_make_protokoll
1206
1207	# make on local host
1208	else
1209
1210	if [[ $compile_utility_programs = false ]]
1211	then
1212
1213	# DEPOSITORY VERZEICHNIS ERZEUGEN, FALLS NOCH NICHT VORHANDEN
1214	eval remote_md=$remote_md
1215	if [[ ! -d $remote_md ]]
1216	then
1217	if mkdir $remote_md
1218	then
1219	printf "\n\n *** directory for make depository:"
1220	printf "\n $remote_md"
1221	printf "\n was created\n"
1222	else
1223	printf "\n +++ directory for make depository:"
1224	printf "\n $remote_md"
1225	printf "\n cannot be created"
1226	locat=local_depository_path; exit
1227	fi
1228	fi
1229
1230	# QUELLTEXT-DATEIEN AUS REPOSITORY INS DEPOSITORY KOPIEREN
1231	echo " "
1232	echo " *** updating sources in $remote_md"
1233	cd $remote_md
1234	cp $local_source_path/${mainprog}_sources.tar .
1235	tar xf ${mainprog}_sources.tar
1236
1237	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF LOKALEM RECHNER AUSFUEHREN
1238	echo " "
1239	echo " *** execute \"make\" on local host"
1240
1241	make $make_options PROG=$mainprog F90=$compiler_name COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options" 2>&1 \| tee ${remote_host}_last_make_protokoll
1242
1243	if [[ $? != 0 ]]
1244	then
1245	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1246	if [[ $silent = false ]]
1247	then
1248	answer=dummy
1249	printf "\n"
1250	while [[ "$answer" != c && "$answer" != k ]]
1251	do
1252	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
1253	read answer
1254	if [[ "$answer" = l ]]
1255	then
1256	more ${remote_host}_last_make_protokoll
1257	fi
1258	done
1259	if [[ $answer = k ]]
1260	then
1261	locat=user_abort; exit
1262	fi
1263	fi
1264	fi
1265
1266
1267	# NEUE VERSION AUF LOKALEM RECHNER ZUSAMMENPACKEN
1268	printf "\n *** tar update on local host ..."
1269	tar -cf ${mainprog}_current_version.tar .$suf .o *.mod
1270
1271
1272	# COMPILE THE UTILITY PROGRAMS
1273	elif [[ $compile_utility_programs = true ]]
1274	then
1275	printf "\n\n"
1276	echo " *** compiling the utility programs ..."
1277	cd ${local_source_path}/../UTIL
1278	make F90=$compiler_name F90_SER=$compiler_name_ser COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options"
1279	cd - > /dev/null
1280	fi
1281
1282	fi
1283
1284	done
1285
1286
1287	if [[ $host_found = false ]]
1288	then
1289	if [[ $host = all ]]
1290	then
1291	printf "\n +++ no hosts found in configuration file"
1292	else
1293	printf "\n +++ host \"$host\" not found in configuration file"
1294	fi
1295	locat=config_file; exit
1296	fi
1297
1298
1299
1300	# ABSCHLIESSENDE ARBEITEN
1301	rm -f hosts_found_in_config_file
1302

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |