source: palm/trunk/SCRIPTS/mbuild @ 1038

Last change on this file since 1038 was 1021, checked in by raasch, 12 years ago

script adjustments for lcsb (Seoul National University)

  • Property svn:keywords set to Id Rev
File size: 54.3 KB
Line 
1#!/bin/ksh
2# mbuild - script for compiling the PALM code and its utility programs
3# $Id: mbuild 1021 2012-10-02 13:52:49Z raasch $
4
5     # Procedure to compile code on local and remote hosts using the
6     # make-mechanism. The source code must be provided on the local host.
7
8     # Last changes:
9     # 06/05/02 - Siggi - start development
10     # 12/06/02 - Siggi - first version finished
11     # 12/09/02 - Siggi - ibmh (hanni.hlrn.de) included
12     # 19/12/02 - Siggi - ibmb included
13     # 05/02/03 - Siggi - hostname nobela included
14     # 04/03/03 - Siggi - host nech included
15     # 06/03/03 - Siggi - make_call_string is echoed without '' to
16     #                    file LAST_MAKE_CALL (otherwise error on NEC, because
17     #                    '' are part of compiler options
18     # 16/03/03 - Siggi - Two underscores are placed in front of every define
19     #                    string, in case that palm.f90 version contains
20     #                    such strings
21     # 16/04/03 - Siggi - First extensions for linux machines
22     # 24/06/03 - Siggi - host orkan included
23     # 17/07/03 - Siggi - IP adress set to new "cross" machine at DKRZ
24     # 24/07/03 - Siggi - host maestro admitted
25     # 06/08/03 - Siggi - host gregale admitted
26     # 05/11/03 - Siggi - hosts irifi and quanero are now belonging to lcmuk
27     # 19/11/03 - Heiko - on lcmuk, mbuild does not tar the *.i files
28     # 08/01/04 - Siggi - additional preprocessor directive for ibm included
29     #                    (-D$OMP=OMP) in order to avoid problems with
30     #                    OMP_NUM_THREADS
31     # 09/01/04 - Siggi - action above cancelled
32     # 28/01/04 - Siggi - action above re-cancelled
33     # 08/03/04 - Siggi - host scirocco admitted
34     # 26/03/04 - Siggi - .o and .mod files are also deleted in depository, if
35     #                    the respective .f90 file is not listed in the makefile
36     #                    and deletion is demanded by the user
37     # 12/04/04 - Siggi - scp2 instead of scp used for transfer from decalpha
38     #                    due to error in ssh installation (otherwise a prompt
39     #                    for the password appears)
40     # 23/07/04 - Siggi - changes due to the new berni configuration
41     #                    (federation switch)
42     # 08/09/04 - Siggi - hanni IP address changed to 130.75.4.10
43     # 23/09/04 - Joerg - correction of IP-Address for 'cross' (DKRZ)
44     # 09/03/05 - Siggi - on nech, mbuild does not tar the *.i files
45     # 31/03/05 - Siggi - mbuild does not tar *.i files any more
46     # 24/04/05 - Siggi - netcdf support on lcmuk
47     # 25/04/05 - Siggi - netcdf support on gfdl3 (decalpha)
48     # 12/05/05 - Siggi - netcdf support on ibm
49     #                    set OBJECT_MODE=64 for compiling on ibmb, ibmh
50     # 18/05/05 - Siggi - netcdf support on nec
51     # 19/05/05 - Siggi - IP addres 134.75.155.74 changed to 165.132.26.56
52     # 23/05/05 - Siggi - netcdf support on ibms
53     # 01/06/05 - Siggi - reset of cpp_options to "" on lcmuk
54     # 30/06/05 - Siggi - netcdf support on bora
55     # 20/10/05 - Siggi - update of netcdf-version on decalpha (gfdl3)
56     # 04/11/05 - Siggi - netcdf 3.6.0-p1 on ibmh/ibmb
57     # 30/12/05 - Siggi - change of IP adresses in subnet 130.75.105
58     #                    host gfdl5 (ibmy) admitted
59     # 10/01/06 - Siggi - cpp directive for NetCDF 64bit support
60     # 20/01/06 - Siggi - cpp directive for ibmy
61     # 09/02/06 - Marcus- compile only once on lcmuk (as on ibmh/ibmb)
62     # 10/02/06 - Siggi - modifications for scp on decalpha
63     # 13/04/06 - Siggi - ostria admitted
64     # 19/04/06 - Siggi - preprocessor directive -D$OMP=OMP for ibm removed
65     # 23/05/05 - Siggi - lctit (SUN Fire X4600) admitted
66     # 29/05/05 - Siggi - atmos (lcide) admitted
67     # 23/08/06 - Siggi - netcdf support for scirocco (notebook)
68     # 24/11/06 - Siggi - breva and levanto admitted
69     # 07/02/07 - Siggi - adapted for RIAM (neck)
70     # 10/02/07 - Siggi - all hpmuk-related code removed
71     # 02/03/07 - Siggi - compilation of utility programs and transfer of
72     #                    scripts to remote hosts added (option -u)
73     # 14/03/07 - Siggi - fimm admitted, revision number added to terminal
74     #                    output
75     # 16/03/07 - Siggi - adjustments (netcdf) for lctit
76     #                    adjustments for running under pdksh, local ip-addres
77     #                    is not determined any more
78     # 30/03/07 - Siggi - cpp-directives/options + netcdf-options are read
79     #                    from configuration file
80     #                    host identifier (local_host) is read from config file
81     # 10/10/07 - Siggi - bugfix: handling of comment lines
82     # 18/07/08 - Siggi - adapted for lcsgih
83     # 21/07/08 - Siggi - mainprog (executable) is added to the tar-file
84     #                    ({mainprog}_current_version)
85     # 02/10/08 - Siggi - adapted for lcxt4
86     # 14/11/08 - Siggi - update mechanism completely revised: source tarfile
87     #                    remains in source directory, one depository per block
88     #                    (given in the config-file) is created, allways all
89     #                    files from the source directory are copied to the
90     #                    respective depository, no additional file checks are
91     #                    done any more (version 2.1)
92     # 13/01/09 - Marcus- re-enable compilation more than once on lcmuk (as on
93     #                    other machines)
94     # 21/03/09 - Siggi - -u copies also copies process_dvr_output and
95     #                    .dvrserver.config
96     # 21/04/09 - Siggi - adjustments for new IBM at DKRZ, which is now ibmh
97     # 25/08/09 - BjornM- adapted for lck
98     # 01/12/09 - BjornM- re-adjustments for lcxt4
99     # 01/02/10 - Siggi - adjustments for lcxt5m
100     # 03/02/10 - Siggi - make options (mopts) to be set by configuration file
101     #                    implemented, remoted mode option -r completely
102     #                    removed, t3e related parts removed
103     # 26/02/10 - BjornM- re-adjustments for lcxt4 (new modules)
104     # 01/03/10 - Siggi - mpilib replaced by modules: explicit module settings
105     #                    removed; modules should now be given in the
106     #                    configuration file
107     # 02/03/10 - Siggi - utility programs are created separately for each
108     #                    block in the configuration file,
109     #                    parallel make for utility programs
110     # 12/03/10 - Siggi - bugfix: remode_md was given a wrong value
111     # 16/08/10 - BjornM- bugfix: call of modules on local host, new workaround
112     #                    for lcxt4
113     # 07/09/10 - Siggi - bugfix for wrong netcdf/3.6.3 module on lcsgi
114     # 08/12/10 - Siggi - initialization of the module command changed for
115     #                    SGI-ICE/lcsgi
116     #                    adjustments for Kyushu Univ. (lcrte, ibmku)
117     # 14/12/10 - Siggi - adjustments for new Tsubame system at Tokyo
118     #                    institute of technology (lctit)
119     # 04/03/11 - BjornM- re-adjustments for lcxt4
120     # 06/03/11 - Siggi - adjustments for ibmkisti
121     # 03/04/11 - Micha - added lckordi
122     # 17/08/11 - Siggi - HLRN access via hicegate0 (130.75.4.101)
123     # 27/11/11 - Siggi - Bugfix for make options setting (-j)
124     # 12/12/11 - BjornM- added mrun GUI to ulitity programs
125     # 25/01/12 - BjornM- compilation of check_namelist_files (namelist file
126     #                    check program) has been added to the utility branch),
127     #                    modfified the compilation of mrungui
128     # 31/01/12 - BjornM- bugfix for compilation of utility programs on
129     #                    multiple localhost branches
130     # 08/03/12 - BjornM- bugfix: cpp directive for namelist check program
131     #                    corrected
132     # 02/05/12 - Bjoern- lcxt4 is now lcxe6, adjustments for lcxe6,
133     #                    bugfixes for the parameter file check, initial
134     #                    commands on ssh calls sourced out to .mrun.config
135     # 05/06/12 - Bjoern- bugfixes for execution of login_init_cmd
136     # 18/06/12 - Siggi - option -v (silent mode) added
137     # 25/06/12 - Siggi - option -K (block conditions) added
138     # 27/09/12 - Siggi - compiler options (F90FLAGS) added for namelist check
139     # 02/10/12 - Siggi - added lcsb
140
141
142    # VARIABLE DECLARATIONS + DEFAULT VALUES
143 block_conditions=none
144 block_conditions_found=false
145 compile_utility_programs=false
146 config_file=.mrun.config
147 fimm=false
148 host=all
149 host_found=false
150 locat=normal
151 makefile=""
152 module_calls=""
153 util_compiled_localhost=false
154 scirocco=false
155 silent=false
156 suf=f90
157 update=false
158 working_directory=`pwd`
159
160 typeset -i  ih ihost=0
161
162 typeset  -R30 calltime
163 typeset  -L20 column1
164 typeset  -L50 column2
165 typeset  -L70 column3
166 typeset  -L40 version="MBUILD  2.1  Rev$Rev: 1021 $"
167
168    # ERROR HANDLING
169    # IN CASE OF EXIT:
170 trap 'rm -rf  $working_directory/tmp_mbuild
171       if [[ $locat != normal ]]
172       then
173          printf "\n\n +++ mbuild killed \n\n"
174       else
175          printf "\n\n *** mbuild finished \n\n"
176       fi' exit
177
178
179    # IN CASE OF TERMINAL-BREAK:
180 trap 'rm -rf  $working_directory/tmp_mbuild
181       printf "\n\n +++ mbuild killed by \"^C\" \n\n"
182       exit
183      ' 2
184
185
186 tmp_mbuild=${working_directory}/tmp_mbuild
187
188    # READ SHELLSCRIPT-OPTIONS
189 while  getopts  :c:h:K:m:s:uv  option
190 do
191   case  $option  in
192       (c)   config_file=$OPTARG;;
193       (h)   host=$OPTARG;;
194       (K)   block_conditions=$OPTARG;;
195       (m)   makefile=$OPTARG;;
196       (s)   suf=$OPTARG;;
197       (u)   compile_utility_programs=true;;
198       (v)   silent=true;;
199       (\?)  printf "\n  +++ unknown option $OPTARG \n";
200             locat=parameter; exit;;
201   esac
202 done
203
204
205
206    # CHECK, IF CONFIGURATION-FILE EXISTS
207 if [[ ! -f $config_file ]]
208 then
209    printf "\n  +++ configuration file: "
210    printf "\n           $config_file"
211    printf "\n      does not exist"
212    locat=configuration; exit 
213 fi
214
215
216
217    # DETERMINE THE LOCAL HOST
218 local_host_real_name=$(hostname)
219# local_addres=$(nslookup `hostname` 2>&1 | grep "Address:" | tail -1 | awk '{print $2}')
220
221
222
223    # DETERMINE HOST-IDENTIFIER (local_host) FROM THE CONFIG-FILE
224 line=""
225 grep  "%host_identifier"  $config_file  >  $tmp_mbuild
226 while read line
227 do
228    if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
229    then
230       HOSTNAME=`echo $line | cut -d" " -s -f2`
231       host_identifier=`echo $line | cut -d" " -s -f3`
232       if [[ $local_host_real_name = $HOSTNAME ]]
233       then
234          local_host=$host_identifier
235          break
236       fi
237    fi
238 done < $tmp_mbuild
239
240 if [[ "$local_host" = "" ]]
241 then
242    printf "\n  +++ no host identifier found in configuration file \"$config_file\""
243    printf "\n      for local host \"$local_host_real_name\"."
244    printf "\n      Please add line"
245    printf "\n      \"\%host_identifier $local_host_real_name <identifier>\""
246    printf "\n      to the configuration file."
247    locat=local_host; exit
248 fi
249
250
251
252 [[ $local_host_real_name = scirocco ]]  &&  scirocco=true
253 [[ $local_host_real_name = fimm.bccs.uib.no ]]  &&  fimm=true
254
255
256
257 if [[ $local_host != ibms ]]
258 then
259    config_file=$PWD/$config_file
260 else
261    config_file=`pwd`/$config_file
262 fi
263
264
265    # determine the block conditions
266 if [[ $block_conditions != none ]]
267 then
268    block_condition1=`echo $block_conditions | cut -d" " -f1`
269    block_condition2=`echo $block_conditions | cut -d" " -f2`
270    if [[ "$block_condition2" = "$block_condition1" ]]
271    then
272       block_condition2=""
273    fi
274 fi
275
276 
277    # DETERMINE USER NAME ON LOCAL HOST FROM THE CONFIG-FILE
278 line=""
279 grep  " $local_host" $config_file | grep "%remote_username"  >  $tmp_mbuild
280 while read line
281 do
282    if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
283    then
284       local_username=`echo $line | cut -d" " -s -f2`
285    fi
286 done < $tmp_mbuild
287
288
289 if [[ "$local_username" = "" ]]
290 then
291    printf "\n  +++ no user name found in configuration file"
292    printf "\n      for local host \"$local_host\" "
293    locat=config_file; exit
294 fi
295
296
297    # DETERMINE LOCAL SOURCE-CODE PATH.
298    # FIRST CHECK, IF A GLOBAL SOURCE-CODE PATH HAS BEEN DECLARED FOR ALL HOSTS.
299    # THEREFORE, FIRST SET ALL GLOBAL VARIABLES DECLARED IN THE CONFIG-FILE,
300    # BECAUSE THEY MAY BE USED AS PART OF THE PATH NAME.
301 line=""
302 grep "%" $config_file  >  $tmp_mbuild
303 while read line
304 do
305    if [[ "$line" != ""  &&  "$(echo $line | cut -d" " -s -f3)" = ""  &&  $(echo $line | cut -c1) != "#" ]]
306    then
307       var=`echo $line | cut -d" " -s -f1 | cut -c2-`
308       value=`echo $line | cut -d" " -s -f2`
309       eval export $var=\$value
310    fi
311 done < $tmp_mbuild
312
313    # NOW CHECK, IF A GLOBAL SOURCE-CODE-PATH HAS BEEN DECLARED
314 line=""
315 grep "%source_path" $config_file  >  $tmp_mbuild
316 while read line
317 do
318    if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
319    then
320       if [[ "$(echo $line | cut -d" " -s -f3)" = "" ]]
321       then
322          global_source_path=`echo $line | cut -d" " -s -f2`
323       fi
324    fi
325 done < $tmp_mbuild
326
327 line=""
328 grep  " $local_host" $config_file | grep "%source_path"  >  $tmp_mbuild
329 while read line
330 do
331    if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
332    then
333       local_source_path=`echo $line | cut -d" " -s -f2`
334    fi
335 done < $tmp_mbuild
336
337 if [[ "$local_source_path" = "" ]]
338 then
339    if [[ "$global_source_path" != "" ]]
340    then
341       local_source_path=$global_source_path
342    else
343       printf "\n  +++ no source path found in configuration file"
344       printf "\n      for local host \"$local_host\" "
345       printf "\n      please set \"\%source_path\" in configuration file"
346       locat=config_file; exit
347    fi
348 fi
349 eval local_source_path=$local_source_path
350 eval local_source_path=$local_source_path
351
352
353
354    # DETERMINE GLOBAL DEPOSITORY-PATH
355 line=""
356 grep "%depository_path" $config_file  >  $tmp_mbuild
357 while read line
358 do
359    if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
360    then
361       if [[ "$(echo $line | cut -d" " -s -f3)" = "" ]]
362       then
363          global_depository_path=`echo $line | cut -d" " -s -f2`
364       fi
365    fi
366 done < $tmp_mbuild
367
368 if [[ $found = false ]]
369 then
370    printf "\n  +++ no \%depository_path found in" 
371    printf "\n                            $config_file"
372    locat=depository_path; exit
373  fi
374
375    # CHECK, IF A MAIN PROGRAM HAS BEEN DEFINED IN THE CONFIG-FILE
376 if [[ $(grep -c "%mainprog" $config_file) != 1 ]]
377 then
378    printf "\n  +++ no main program or more than one main program defined"
379    printf "\n      in configuration file"
380    locat=configuration; exit
381 else
382    line=`grep "%mainprog" $config_file`
383    if [[ "$line" = ""  ||  $(echo $line | cut -c1) = "#" ]]
384    then
385       printf "\n  +++ no main program defined in configuration file"
386       locat=configuration; exit
387    fi
388    mainprog=`echo $line | cut -d" " -s -f2 | cut -d"." -f1`
389 fi
390
391
392
393    # CHECK IF MAKEFILE EXITS
394 [[ "$makefile" = "" ]]  &&  makefile=$local_source_path/Makefile
395 if [[ ! -f $makefile ]]
396 then
397    printf "\n  +++ makefile: "
398    printf "\n           $makefile"
399    printf "\n      does not exist"
400    locat=makefile; exit 
401 fi
402
403
404    # HEADER-OUTPUT (PART1: MESSAGES CONCERNING THE LOCAL HOST)
405 calltime=$(date)
406 printf "\n"
407 printf "#------------------------------------------------------------------------# \n"
408 printf "| $version$calltime | \n"
409 printf "|                                                                        | \n"
410 column1="called on:"; column2=$local_host_real_name
411 printf "| $column1$column2 | \n"
412 column1="local username:"; column2=$local_username
413 printf "| $column1$column2 | \n"
414 column1="local IP-addres:"; column2=$local_addres
415 printf "| $column1$column2 | \n"
416 column1="config file:"; column2=$config_file
417 printf "| $column1$column2 | \n"
418 column1="makefile:"; column2=$makefile
419 printf "| $column1$column2 | \n"
420 column1="local source path:"; column2=$local_source_path
421 printf "| $column1$column2 | \n"
422 printf "#------------------------------------------------------------------------# \n"
423
424# printf "|                                                                        | \n"
425
426
427 if [[ $compile_utility_programs = false ]]
428 then
429
430       # IN ANY CASE, GIVE ALL FILES WRITE-PERMIT, IN ORDER TO AVOID PROBLEMS
431       # WITH OVERWRITING FILES ON THE REMOTE HOST
432    cd  $local_source_path
433    printf "\n\n  *** tar of makefile and source files in $local_source_path" 
434    tar -cf  ${mainprog}_sources.tar  Makefile  *.$suf
435    printf "\n"
436
437 else
438    cd  $local_source_path
439    printf "\n\n  *** tar of makefile and source files in $local_source_path" 
440 
441    cat Makefile_check|while read line
442    do
443       line=$(echo $line|grep RCS)
444       if [[ $line == *"RCS"* ]]
445       then
446          line=$(echo $line|sed 's/RCS = //g')
447          break
448       fi
449    done
450
451    tar -cf  ${mainprog}_sources_check.tar  Makefile_check  $line
452    printf "\n"
453 fi
454
455
456
457    # GET CONFIRMATION TO CONTINUE
458 if [[ $host = all ]]
459 then
460    printf "\n  *** updates will be made for ALL hosts found in"
461    printf "\n      the configuration file"
462 else
463    printf "\n  *** update will be made for host \"$host\" "
464 fi
465
466 if [[ $silent = false ]]
467 then
468    answer=dummy
469    printf "\n\n"
470    while [[ "$answer" != y  &&  "$answer" != Y  &&  "$answer" != n  &&  "$answer" != N ]]
471    do
472       printf " >>> continue (y/n) ?  "
473       read  answer
474    done
475    if [[ $answer = n  ||  $answer = N ]]
476    then
477       locat=user_abort; exit
478    fi
479 fi
480 
481 
482
483   
484    # GENERIERUNG DER AKTUELLEN MODELLVERSION FUER ALLE RECHNER-/UEBERSETZUNGS-
485    # VERSIONEN, DIE IN DER KONFIGURATIONSDATEI GEFUNDEN WERDEN
486 printf "\n  *** scanning configuration file for host(s) ..."
487
488 grep  %fopts  $config_file  >  $tmp_mbuild
489 while read line
490 do
491       # KOMMENTARZEILEN UEBERSPRINGEN
492    [[ $(echo $line | cut -c1) = "#" ]]  &&  continue
493    (( ihost = ihost + 1 ))
494    hostline[$ihost]="$line"
495 done < $tmp_mbuild
496
497 
498 while (( ih < ihost ))
499 do
500
501    (( ih = ih + 1 ))
502
503       # determine remote host and conditions for the respective block
504       # continue, only if this host has been chosen via -h option and if
505       # conditions have been chosen via -K option
506    remote_host_string=`echo ${hostline[$ih]} | cut -d" " -s -f3-`
507    remote_host=`echo $remote_host_string | cut -d" " -f1`
508    if [[ $host != all ]]
509    then
510       [[ $remote_host != $host ]]  &&  continue
511    fi
512    host_found=true
513    condition1=`echo $remote_host_string | cut -d" " -s -f2`
514    if [[ $condition1 = $remote_host ]]
515    then
516       condition1=""
517    else
518       condition2=`echo $remote_host_string | cut -d" " -s -f3`
519    fi
520
521    if [[ $block_conditions != none ]]
522    then
523       if [[ "$condition1" != "$block_condition1"  || "$condition2" != "$block_condition2" ]]
524       then
525          continue
526       fi
527       block_conditions_found=true
528    fi
529
530    modules=""
531    netcdf_inc=""
532    netcdf_lib=""
533    make_options=""
534
535       # IP-ADRESSE DES REMOTE-RECHNERS BESTIMMEN
536    case  $remote_host  in
537        (lckordi)        remote_adress=210.219.61.8;;
538        (lcmuk)          remote_addres=130.75.105.2;;
539        (lcrte)          remote_addres=133.5.185.60;;
540        (lcsb)           remote_adress=147.46.30.151;;
541        (lcsgib)         remote_addres=130.73.232.102;;
542        (lcsgih)         remote_addres=130.75.4.101;;
543        (lck)            remote_addres=165.132.26.61;;
544        (lctit)          remote_addres=10.1.6.170;;
545        (lcxe6)          remote_addres=129.177.20.113;;
546        (lcxt5m)         remote_addres=193.166.211.144;;
547        (decalpha)       remote_addres=165.132.26.56;;
548        (ibmh)           remote_addres=136.172.40.15;;
549        (ibmkisti)       remote_addres=150.183.146.24;;
550        (ibmku)          remote_addres=133.5.4.129;;
551        (ibms)           remote_addres=150.183.5.101;;
552        (ibmy)           remote_addres=165.132.26.58;;
553        (nech)           remote_addres=136.172.44.192;;
554        (neck)           remote_addres=133.5.178.11;;
555        (ground.yonsei.ac.kr) remote_addres=134.75.155.33;;
556        (*)              if [[ $local_host != $remote_host ]]
557                         then
558                            printf "\n  +++ remote host \"$remote_host\" unknown";
559                            printf "\n      please inform PALM group support!"
560                         fi;;
561    esac
562
563
564       # REMOTE-USERNAMEN ERMITTELN
565    line=""
566    found=false
567    grep  "$remote_host_string" $config_file | grep "%remote_username"  >  $tmp_mbuild
568    while read line1
569    do
570
571       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
572       then
573          line="$line1"
574       fi
575
576       if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
577       then
578          remote_username=`echo $line | cut -d" " -s -f2`
579          found=true
580       fi
581
582    done < $tmp_mbuild
583
584    if [[ $found = false ]]
585    then
586       printf "\n  +++ no remote username found in configuration file"
587       printf "\n      for \"$remote_host_string\" "
588       locat=config_file; exit
589    fi
590
591
592       # REMOTE-QUELLTEXTPFAD ERMITTELN
593    line=""
594    remote_source_path=""
595    grep  "$remote_host_string" $config_file | grep "%source_path"  >  $tmp_mbuild
596    while read line1
597    do
598
599       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
600       then
601          line="$line1"
602       fi
603
604       if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
605       then
606          remote_source_path=`echo $line | cut -d" " -s -f2`
607       fi
608
609    done < $tmp_mbuild
610
611    if [[ "$remote_source_path" = "" ]]
612    then
613       if [[ "$global_source_path" != "" ]]
614       then
615          remote_source_path=$global_source_path
616       else
617          printf "\n  +++ no source path found in configuration file"
618          printf "\n      for \"$remote_host_string\" "
619          locat=config_file; exit
620       fi
621    fi
622
623    remote_ud=${remote_source_path}/../UTIL
624    remote_ud=$(eval echo $remote_ud)
625
626
627       # REMOTE-PFAD FUER MAKE-DEPOSITORY ERMITTELN
628    remote_md=""
629    line=""
630    grep  "$remote_host_string" $config_file | grep "%depository_path"  >  $tmp_mbuild
631    while read line1
632    do
633
634       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
635       then
636          line="$line1"
637       fi
638
639       if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
640       then
641          remote_md=`echo $line | cut -d" " -s -f2`
642       fi
643
644    done < $tmp_mbuild
645
646    if [[ "$remote_md" = "" ]]
647    then
648       if [[ "$global_depository_path" != "" ]]
649       then
650          remote_md=$global_depository_path
651       else
652          printf "\n  +++ no depository path found in configuration file"
653          printf "\n      for \"$remote_host_string\" "
654          printf "\n      please set \"\%depository_path\" in configuration file"
655          locat=config_file; exit
656       fi
657    fi
658
659    remote_md=$(eval echo $remote_md)
660    block=""
661    [[ "$condition1" != "" ]]  &&  block=_$condition1
662    [[ "$condition2" != "" ]]  &&  block=${block}_$condition2
663    remote_md=${remote_md}$block
664
665
666       # COMPILERNAMEN ERMITTELN
667    line=""
668    found=false
669    grep  "$remote_host_string" $config_file | grep "%compiler_name "  >  $tmp_mbuild
670    while read line1
671    do
672
673       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
674       then
675          line="$line1"
676       fi
677
678       if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
679       then
680          compiler_name=`echo $line | cut -d" " -s -f2`
681          found=true
682       fi
683
684    done < $tmp_mbuild
685
686    if [[ $found = false ]]
687    then
688       printf "\n  +++ no compiler name found in configuration file"
689       printf "\n      for \"$remote_host_string\" "
690       locat=config_file; exit
691    fi
692
693
694       # BEI BENUTZUNG EINES PARALLELEN COMPILERS MUSS AUCH EIN
695       # SERIELLER COMPILERNAME ERMITTELT WERDEN
696    if [[ $(echo $remote_host_string | grep -c parallel) = 1 ]]
697    then
698       line=""
699       found=false
700       grep  "$remote_host_string" $config_file | grep "%compiler_name_ser"  >  $tmp_mbuild
701       while read line1
702       do
703
704          if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
705          then
706             line="$line1"
707          fi
708
709          if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
710          then
711             compiler_name_ser=`echo $line | cut -d" " -s -f2`
712             found=true
713          fi
714
715       done < $tmp_mbuild
716
717       if [[ $found = false ]]
718       then
719          printf "\n  +++ no serial compiler name found in configuration file"
720          printf "\n      for \"$remote_host_string\" "
721          locat=config_file; exit
722       fi
723    else
724       compiler_name_ser=$compiler_name
725    fi
726
727
728
729       # PRAEPROZESSOR-OPTIONEN/DIREKTIVEN ERMITTELN
730    line=""
731    found=false
732    grep  "$remote_host_string" $config_file | grep "%cpp_options"  >  $tmp_mbuild
733    while read line1
734    do
735
736       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
737       then
738          line="$line1"
739       fi
740
741       if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
742       then
743             # EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
744          cpp_options=`echo $line | cut -d" " -s -f2 | sed 's/::/%DUM%/g' | sed 's/:/ /g' | sed 's/%DUM%/:/g'`
745          found=true
746       fi
747
748    done < $tmp_mbuild
749
750    if [[ $found = false ]]
751    then
752       printf "\n  +++ no preprocessor options found in configuration file"
753       printf "\n      for \"$remote_host_string\" "
754       locat=config_file; exit
755    fi
756
757
758       # RECHNERSPEZIFISCHE CPP-DIREKTIVEN HINZUFUEGEN
759    for  string  in  $remote_host_string
760    do
761       if [[ $(echo $remote_host | cut -c1-2) = lc  &&  $(echo $string | cut -c1-2) = lc ]]
762       then
763          cpp_options="$cpp_options -D__lc "
764       elif [[ $(echo $remote_host | cut -c1-3) = ibm  &&  $(echo $string | cut -c1-3) = ibm ]]
765       then
766          cpp_options="${cpp_options},-D__ibm"
767       elif [[ $(echo $remote_host | cut -c1-3) = nec  &&  $(echo $string | cut -c1-3) = nec ]]
768       then
769          cpp_options="${cpp_options} -D__nec"
770       else
771          if [[ $(echo $remote_host | cut -c1-3) = ibm ]]
772          then
773             cpp_options="${cpp_options},-D__$string"
774          else
775             cpp_options="$cpp_options -D__$string "
776          fi
777       fi
778    done
779
780
781
782       # NETCDF-OPTIONEN ERMITTELN
783    line=""
784    grep  "$remote_host_string" $config_file | grep "%netcdf_inc"  >  $tmp_mbuild
785    while read line1
786    do
787
788       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
789       then
790          line="$line1"
791       fi
792
793       if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
794       then
795             # EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
796          netcdf_inc=`echo $line | cut -d" " -s -f2 | sed 's/::/%DUM%/g' | sed 's/:/ /g' | sed 's/%DUM%/:/g'`
797       fi
798
799    done < $tmp_mbuild
800
801    line=""
802    grep  "$remote_host_string" $config_file | grep "%netcdf_lib"  >  $tmp_mbuild
803    while read line1
804    do
805
806       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
807       then
808          line="$line1"
809       fi
810
811       if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
812       then
813             # EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
814          netcdf_lib=`echo $line | cut -d" " -s -f2 | sed 's/::/%DUM%/g' | sed 's/:/ /g' | sed 's/%DUM%/:/g'`
815       fi
816
817    done < $tmp_mbuild
818
819
820
821       # get make options
822    line=""
823    found=false
824    grep  "$remote_host_string" $config_file | grep "%mopts"  >  $tmp_mbuild
825    while read line1
826    do
827
828       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
829       then
830          line="$line1"
831       fi
832
833       if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
834       then
835             # remove colons from directive string
836          make_options=`echo $line | cut -d" " -s -f2 | sed 's/::/%DUM%/g' | sed 's/:/ /g' | sed 's/%DUM%/:/g'`
837
838       fi
839
840    done < $tmp_mbuild
841
842
843
844       # COMPILEROPTIONEN ERMITTELN
845    line=""
846    found=false
847    grep  "$remote_host_string" $config_file | grep "%fopts"  >  $tmp_mbuild
848    while read line1
849    do
850
851       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
852       then
853          line="$line1"
854       fi
855
856       if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
857       then
858             # EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
859          compiler_options=`echo $line | cut -d" " -s -f2 | sed 's/::/%DUM%/g' | sed 's/:/ /g' | sed 's/%DUM%/:/g'`
860          found=true
861
862             # NETCDF-INCLUDEVERZEICHNIS HINZUFUEGEN
863          compiler_options="$compiler_options $netcdf_inc"
864       fi
865
866    done < $tmp_mbuild
867
868    if [[ $found = false ]]
869    then
870       printf "\n  +++ no compiler options found in configuration file"
871       printf "\n      for \"$remote_host_string\" "
872       locat=config_file; exit
873    fi
874
875
876       # get login init commands, "::" is replacing a space
877    line=""
878    grep  "$remote_host_string" $config_file | grep "%login_init_cmd"  >  $tmp_mbuild
879    while read line1
880    do
881
882       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
883       then
884          line="$line1"
885       fi
886
887       if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
888       then
889             # EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
890          init_cmds=`echo $line | cut -d" " -s -f2 | sed 's/::/%DUM%/g' | sed 's/:/ /g' | sed 's/%DUM%/:/g'`
891       fi
892       init_cmds="${init_cmds};"
893    done < $tmp_mbuild
894
895
896       # get modules to be loaded
897    line=""
898    grep  "$remote_host_string" $config_file | grep "%modules"  >  $tmp_mbuild
899    while read line1
900    do
901
902       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
903       then
904          line="$line1"
905       fi
906
907       if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
908       then
909             # EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
910          modules=`echo $line | cut -d" " -s -f2 | sed 's/::/%DUM%/g' | sed 's/:/ /g' | sed 's/%DUM%/:/g'`
911       fi
912
913    done < $tmp_mbuild
914
915
916       # LADER-OPTIONEN ERMITTELN
917    line=""
918    found=false
919    grep  "$remote_host_string" $config_file | grep "%lopts"  >  $tmp_mbuild
920    while read line1
921    do
922
923       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
924       then
925          line="$line1"
926       fi
927
928       if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
929       then
930             # EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
931          loader_options=`echo $line | cut -d" " -s -f2 | sed 's/::/%DUM%/g' | sed 's/:/ /g' | sed 's/%DUM%/:/g'`
932          found=true
933
934             # NETCDF-LIBRARY HINZUFUEGEN
935          loader_options="$loader_options $netcdf_lib"
936       fi
937
938    done < $tmp_mbuild
939
940    if [[ $found = false ]]
941    then
942       printf "\n  +++ no loader options found in configuration file"
943       printf "\n      for \"$remote_host_string\" "
944       locat=config_file; exit
945    fi
946
947
948    printf "\n\n#------------------------------------------------------------------------# \n"
949    if [[ $remote_host = $local_host ]]
950    then
951       column1="remote_host:"; column2="$remote_host (= local host!)"
952    else
953       column1="remote_host:"; column2=$remote_host
954    fi
955    printf "| $column1$column2 | \n"
956    printf "|                                                                        | \n"
957    column1="conditions:"; column2="$condition1 $condition2"
958    printf "| $column1$column2 | \n"
959    column1="make depository:"; column2=$remote_md
960    printf "| $column1$column2 | \n"
961    line=$(echo "$remote_md" | cut -c51-)
962    while [[ "$line" != "" ]]
963    do
964       column1=""
965       column2=$line
966       printf "| $column1$column2 | \n"
967       line=$(echo "$line" | cut -c51-)
968    done
969    if [[ $compile_utility_programs = true ]]
970    then
971       column1="utility directory:"; column2=$remote_ud
972       printf "| $column1$column2 | \n"
973    fi
974    column1="username:"; column2=$remote_username
975    printf "| $column1$column2 | \n"
976    column1="addres:"; column2=$remote_addres
977    printf "| $column1$column2 | \n"
978    column1="compiler:"; column2=$compiler_name
979    printf "| $column1$column2 | \n"
980    if [[ $compile_utility_programs = true ]]
981    then
982       column1="serial compiler:"; column2=$compiler_name_ser
983       printf "| $column1$column2 | \n"
984    fi
985    if [[ "$make_options" != "" ]]
986    then
987       column1="make options:"; column2=$make_options
988       printf "| $column1$column2 | \n"
989    fi
990    column1="cpp options:"; column2=$cpp_options
991    printf "| $column1$column2 | \n"
992    line=$(echo "$cpp_options" | cut -c51-)
993    while [[ "$line" != "" ]]
994    do
995       column1=""
996       column2=$line
997       printf "| $column1$column2 | \n"
998       line=$(echo "$line" | cut -c51-)
999    done
1000    column1="compiler options:"; column2=$compiler_options
1001    printf "| $column1$column2 | \n"
1002    line=$(echo "$compiler_options" | cut -c51-)
1003    while [[ "$line" != "" ]]
1004    do
1005       column1=""
1006       column2=$line
1007       printf "| $column1$column2 | \n"
1008       line=$(echo "$line" | cut -c51-)
1009    done
1010    column1="loader options:"; column2=$loader_options
1011    printf "| $column1$column2 | \n"
1012    line=$(echo "$loader_options" | cut -c51-)
1013    while [[ "$line" != "" ]]
1014    do
1015       column1=""
1016       column2=$line
1017       printf "| $column1$column2 | \n"
1018       line=$(echo "$line" | cut -c51-)
1019    done
1020    if [[ $modules != "" ]]
1021    then
1022       column1="modules to be load:"; column2=$modules
1023       printf "| $column1$column2 | \n"
1024       line=$(echo "$modules" | cut -c51-)
1025       while [[ "$line" != "" ]]
1026       do
1027          column1=""
1028          column2=$line
1029          printf "| $column1$column2 | \n"
1030          line=$(echo "$line" | cut -c51-)
1031       done
1032    fi
1033    printf "#------------------------------------------------------------------------# \n"
1034
1035    if [[ $silent = false ]]
1036    then
1037       answer=dummy
1038       printf "\n\n"
1039       while [[ "$answer" != y  &&  "$answer" != Y  && "$answer" != c  &&  "$answer" != C  && "$answer" != s  &&  "$answer" != S  &&  "$answer" != a  &&  "$answer" != A ]]
1040       do
1041          printf " >>> continue (y(es)/c(ontinue)/a(bort)/s(skip)) ?  "
1042          read  answer
1043       done
1044       if [[ $answer = a  ||  $answer = A ]]
1045       then
1046          locat=user_abort; exit
1047       fi
1048       if [[ $answer = c  ||  $answer = C ]]
1049       then
1050          silent=true
1051       fi
1052       if [[ $answer = s  ||  $answer = S ]]
1053       then
1054          continue
1055       fi
1056    fi
1057
1058
1059       # make on remote host
1060    if [[ $remote_host != $local_host ]]
1061    then
1062       if [[ $compile_utility_programs = false ]]
1063       then
1064
1065             # AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1066             # FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
1067          echo "  *** copying \"${mainprog}_sources.tar\" to \"${remote_addres}:${remote_md}/\" "
1068          if [[ $remote_host != lctit ]]
1069          then
1070             ssh  ${remote_username}@${remote_addres} "[[ ! -d ${remote_md} ]]  &&  (echo \"  *** ${remote_md} will be created\"; mkdir -p  ${remote_md})"
1071          else
1072                # TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1073                # MIT SSH, DESHALB AUFRUF PER PIPE
1074             print "[[ ! -d ${remote_md} ]]  &&  (echo \"  *** ${remote_md} will be created\"; mkdir -p  ${remote_md})"  |  ssh ${remote_username}@${remote_addres}  2>&1
1075          fi
1076          if [[ $local_host = decalpha ]]
1077          then
1078                # DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
1079                # IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1080                # KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1081             remote_md=`echo $remote_md | sed 's/\$HOME\///'`
1082             /bin/scp  ${local_source_path}/${mainprog}_sources.tar  ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
1083          else
1084             scp  ${local_source_path}/${mainprog}_sources.tar  ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
1085          fi
1086
1087
1088
1089             # FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
1090          echo "  *** untar previous update on remote host, if existing"
1091          if [[ $remote_host != lctit ]]
1092          then
1093             ssh  ${remote_username}@${remote_addres}  "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]]  &&  tar -xf  ${mainprog}_current_version.tar"
1094          else
1095                # TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1096                # MIT SSH, DESHALB AUFRUF PER PIPE
1097             print  "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]]  &&  tar -xf  ${mainprog}_current_version.tar"  |  ssh  ${remote_username}@${remote_addres}  2>&1
1098          fi
1099
1100
1101             # AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
1102          echo "  *** untar actual sources on remote host"
1103          if [[ $remote_host != lctit ]]
1104          then
1105             ssh  ${remote_username}@${remote_addres}  "cd ${remote_md}; tar -xf  ${mainprog}_sources.tar"
1106          else
1107                # TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1108                # MIT SSH, DESHALB AUFRUF PER PIPE
1109             print  "cd ${remote_md}; tar -xf  ${mainprog}_sources.tar"  |  ssh  ${remote_username}@${remote_addres}  2>&1
1110          fi
1111
1112
1113             # MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1114             # KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
1115             # BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
1116             # Z.B. DIE PFADE ZUM COMPILER)
1117          echo "  *** execute \"make\" on remote host"
1118
1119
1120             # generate make call with make options
1121          if [[ $remote_host = nech ]]
1122          then
1123             make_call_string="sxmake  $make_options  PROG=$mainprog  F90=$compiler_name  COPT=\"$cpp_options\"  F90FLAGS=\"$compiler_options\"  LDFLAGS=\"$loader_options\" "
1124          else
1125             make_call_string="make  $make_options  PROG=$mainprog  F90=$compiler_name  COPT=\"$cpp_options\"  F90FLAGS=\"$compiler_options\"  LDFLAGS=\"$loader_options\" "
1126          fi
1127
1128             # generate command to load modules, if modules are given
1129          if [[ "$modules" != "" ]]
1130          then
1131             if [[ $remote_host = lctit ]]
1132             then
1133                module_calls=". $modules"
1134             else
1135                module_calls="module load ${modules};"
1136             fi
1137
1138                # bugfix for wrong netcdf module
1139             if [[ $remote_host = lcsgib  ||  $remote_host = lcsgih ]]
1140             then
1141                if [[ $(echo $module_calls | grep -c netcdf/3.6.3-intel) != 0 ]]
1142                then
1143                   module_calls="$module_calls export LD_LIBRARY_PATH=/sw/dataformats/netcdf/3.6.3-intel/lib:\$LD_LIBRARY_PATH;"
1144                fi
1145             fi
1146          else
1147             module_calls=""
1148          fi
1149
1150          if [[ $remote_host = ibmkisti  ||  $remote_host = ibms  ||  $remote_host = ibmy ]]
1151          then
1152
1153             ssh  ${remote_username}@${remote_addres}  "$init_cmds $module_calls cd ${remote_md}; echo '$make_call_string' > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 | tee ${remote_host}_last_make_protokoll
1154
1155          elif [[ $remote_host = ibmh ]]
1156          then
1157
1158             print "$init_cmds $module_calls export OBJECT_MODE=64; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" | ssh  ${remote_username}@${remote_addres} 2>&1 | tee ${remote_host}_last_make_protokoll
1159
1160          elif [[ $remote_host = lcsgib  ||  $remote_host = lcsgih ]]
1161          then
1162#             print ". /usr/share/modules/init/bash; $module_calls  cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" | ssh  ${remote_username}@${remote_addres} 2>&1 | tee ${remote_host}_last_make_protokoll
1163             print "$init_cmds $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" | ssh  ${remote_username}@${remote_addres} 2>&1 | tee ${remote_host}_last_make_protokoll
1164
1165          elif [[ $remote_host = lctit ]]
1166          then
1167
1168             echo  " "  >  ${remote_host}_last_make_protokoll
1169             while [[ $(cat ${remote_host}_last_make_protokoll | grep -c "Forwarding to N1GE") = 0 ]]
1170             do
1171                print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" | ssh  ${remote_username}@${remote_addres} 2>&1 | tee ${remote_host}_last_make_protokoll
1172             done
1173
1174          elif [[ $remote_host = lcxe6 ]]
1175          then
1176
1177             ssh  ${remote_username}@${remote_addres} "$init_cmds $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 | tee ${remote_host}_last_make_protokoll
1178
1179          else
1180
1181             print "$init_cmds $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" | ssh  ${remote_username}@${remote_addres} 2>&1 | tee ${remote_host}_last_make_protokoll
1182
1183          fi
1184
1185          if [[ $(grep -c MAKE_ERROR ${remote_host}_last_make_protokoll) != 0 ]]
1186          then
1187             printf "\a\n  +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1188             if [[ $silent = false ]]
1189             then
1190                answer=dummy
1191                printf "\n"
1192                while [[ "$answer" != c  &&  "$answer" != k ]]
1193                do
1194                   printf "  >>> continue / list errors / kill mbuild (c/l/k) ? "
1195                   read  answer
1196                   if [[ "$answer" = l ]]
1197                   then
1198                      more ${remote_host}_last_make_protokoll
1199                   fi
1200                done
1201                if [[ $answer = k ]]
1202                then
1203                   locat=user_abort; exit
1204                fi
1205             fi
1206          fi
1207
1208
1209
1210             # NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
1211          printf "\n  *** tar update on remote host ..."
1212          if [[ $remote_host != lctit ]]
1213          then
1214             ssh  ${remote_username}@${remote_addres}  "cd ${remote_md}; chmod u+w *; tar -cf  ${mainprog}_current_version.tar  ${mainprog}  *.f90 *.o *.mod"
1215          else
1216                # TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1217                # MIT SSH, DESHALB AUFRUF PER PIPE
1218             print  "cd ${remote_md}; chmod u+w *; tar -cf  ${mainprog}_current_version.tar  ${mainprog}  *.f90 *.o *.mod"  |  ssh  ${remote_username}@${remote_addres}  2>&1
1219          fi
1220
1221
1222             # AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
1223#          printf "\n  *** \"make clean\" on remote host ..."
1224#          ssh  ${remote_username}@${remote_addres}  "cd ${remote_md}; make clean; rm ${mainprog}_sources.tar; rm *.f90 Makefile"
1225#          printf "\n"
1226
1227
1228
1229
1230          # GLEICHE AKTIONEN FUER DIE UTILITY-PROGRAMME DURCHFUEHREN
1231          # AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1232          # FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
1233       elif [[ $compile_utility_programs = true ]]
1234       then
1235
1236          printf "\n\n"
1237          echo "  *** copying scripts and utility programs to \"${remote_addres}:${remote_ud}/\" "
1238          cd  ${local_source_path}/../SCRIPTS
1239
1240          if [[ $remote_host != lctit ]]
1241          then
1242             ssh  ${remote_username}@${remote_addres} "[[ ! -d ${remote_ud} ]]  &&  (echo \"  *** ${remote_ud} will be created\"; mkdir -p  ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]]  &&  (echo \"  *** ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)"
1243          else
1244                # TIT ERLAUBT NUR DIE AUSFUEHRUNG GANZ BESTIMMTER KOMMANDOS
1245                # MIT SSH, DESHALB AUFRUF PER PIPE
1246             print "[[ ! -d ${remote_ud} ]]  &&  (echo \"  *** ${remote_ud} will be created\"; mkdir -p  ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]]  &&  (echo \"  *** ${remote_ud}/../SCRIPTS will be created\"; mkdir -p  ${remote_ud}/../SCRIPTS)"  |  ssh ${remote_username}@${remote_addres}  2>&1
1247          fi
1248
1249             # KOPIEREN DER SCRIPTE
1250          if [[ $local_host = decalpha ]]
1251          then
1252                # DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTAENDIGEN PFADES
1253                # IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1254                # KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1255             remote_ud=`echo $remote_ud | sed 's/\$HOME\///'`
1256             /bin/scp  batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob  ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS  >  /dev/null
1257          else
1258             scp  batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob  ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS  >  /dev/null
1259          fi
1260
1261          cd  -  > /dev/null
1262          cd  ${local_source_path}/../UTIL
1263
1264
1265             # KOPIEREN DER UTILITY-PROGRAMME
1266          if [[ $local_host = decalpha ]]
1267          then
1268                # DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
1269                # IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1270                # KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1271             remote_ud=`echo $remote_ud | sed 's/\$HOME\///'`
1272             /bin/scp  Makefile  *.f90  ${remote_username}@${remote_addres}:${remote_ud}  >  /dev/null
1273          else
1274             scp  Makefile  *.f90  ${remote_username}@${remote_addres}:${remote_ud}  >  /dev/null
1275          fi
1276
1277
1278
1279             # MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1280             # KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
1281             # BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
1282             # Z.B. DIE PFADE ZUM COMPILER)
1283          echo "  *** execute \"make\" on remote host"
1284
1285          if [[ $remote_host = nech ]]
1286          then
1287             make_call_string="sxmake  $make_options  BLOCK=$block  F90=$compiler_name  F90_SER=$compiler_name_ser  COPT=\"$cpp_options\"  F90FLAGS=\"$compiler_options\"  LDFLAGS=\"$loader_options\" "
1288          else
1289             make_call_string="make  $make_options  BLOCK=$block  F90=$compiler_name  F90_SER=$compiler_name_ser  COPT=\"$cpp_options\"  F90FLAGS=\"$compiler_options\"  LDFLAGS=\"$loader_options\" "
1290          fi
1291
1292             # generate command to load modules, if modules are given
1293          if [[ "$modules" != "" ]]
1294          then
1295             if [[ $remote_host = lctit ]]
1296             then
1297                module_calls=". $modules"
1298             else
1299                module_calls="module load ${modules};"
1300             fi
1301
1302                # bugfix for wrong netcdf module
1303             if [[ $remote_host = lcsgib  ||  $remote_host = lcsgih ]]
1304             then
1305                if [[ $(echo $module_calls | grep -c netcdf/3.6.3-intel) != 0 ]]
1306                then
1307                   module_calls="$module_calls export LD_LIBRARY_PATH=/sw/dataformats/netcdf/3.6.3-intel/lib:\$LD_LIBRARY_PATH;"
1308                fi
1309             fi
1310          else
1311             module_calls=""
1312          fi
1313
1314
1315          if [[ $remote_host = ibms  ||  $remote_host = ibmy ]]
1316          then
1317
1318             ssh  ${remote_username}@${remote_addres}  "$init_cmds $module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR"
1319
1320          elif [[ $remote_host = ibmh ]]
1321          then
1322
1323             print "$init_cmds $module_calls export OBJECT_MODE=64; cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" | ssh  ${remote_username}@${remote_addres}
1324
1325          elif [[ $remote_host = lctit ]]
1326          then
1327
1328             echo  " "  >  ${remote_host}_last_make_protokoll
1329             while [[ $(cat ${remote_host}_last_make_protokoll | grep -c "Forwarding to N1GE") = 0 ]]
1330             do
1331                print "$init_cmds $module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" | ssh  ${remote_username}@${remote_addres} 2>&1 | tee ${remote_host}_last_make_protokoll
1332             done
1333
1334          elif [[ $remote_host = lcxe6 ]]
1335          then
1336
1337             ssh  ${remote_username}@${remote_addres} "$init_cmds $module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 | tee ${remote_host}_last_make_protokoll
1338
1339          else
1340
1341             print "$init_cmds $module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" | ssh  ${remote_username}@${remote_addres} 2>&1 | tee ${remote_host}_last_make_protokoll
1342
1343          fi
1344
1345       fi    # ENDE UEBERSETZUNG DER UTILITY-PROGRAMME
1346
1347       rm -rf  ${remote_host}_last_make_protokoll
1348
1349       # make on local host
1350    else
1351
1352          # workaround for lcxe6
1353       if [[ $remote_host = lcxe6 ]]
1354       then
1355
1356          eval $init_cmds
1357
1358       fi
1359
1360       # first load modules, if given
1361       if [[ "$modules" != "" ]]
1362       then
1363          if [[ $remote_host = lctit ]]
1364          then
1365             . $modules
1366          else
1367             module load ${modules}
1368          fi
1369       fi
1370
1371
1372       if [[ $compile_utility_programs = false ]]
1373       then
1374
1375             # DEPOSITORY VERZEICHNIS ERZEUGEN, FALLS NOCH NICHT VORHANDEN
1376          eval remote_md=$remote_md
1377          if [[ ! -d $remote_md ]]
1378          then
1379             if  mkdir $remote_md
1380             then
1381                printf "\n\n  *** directory for make depository:"
1382                printf "\n           $remote_md"
1383                printf "\n      was created\n"
1384             else
1385                printf "\n  +++ directory for make depository:"
1386                printf "\n           $remote_md"
1387                printf "\n      cannot be created"
1388                locat=local_depository_path; exit
1389             fi
1390          fi
1391
1392             # QUELLTEXT-DATEIEN AUS REPOSITORY INS DEPOSITORY KOPIEREN
1393          echo " "
1394          echo "  *** updating sources in $remote_md"
1395          cd  $remote_md
1396          cp  $local_source_path/${mainprog}_sources.tar  .
1397          tar xf  ${mainprog}_sources.tar
1398
1399             # MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF LOKALEM RECHNER AUSFUEHREN
1400          echo " "
1401          echo "  *** execute \"make\" on local host"
1402
1403          make  $make_options  PROG=$mainprog  F90=$compiler_name  COPT="$cpp_options"  F90FLAGS="$compiler_options"  LDFLAGS="$loader_options"  2>&1 | tee ${remote_host}_last_make_protokoll
1404
1405          if [[ $? != 0 ]]
1406          then
1407             printf "\a\n  +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1408             if [[ $silent = false ]]
1409             then
1410                answer=dummy
1411                printf "\n"
1412                while [[ "$answer" != c  &&  "$answer" != k ]]
1413                do
1414                   printf "  >>> continue / list errors / kill mbuild (c/l/k) ? "
1415                   read  answer
1416                   if [[ "$answer" = l ]]
1417                   then
1418                      more ${remote_host}_last_make_protokoll
1419                   fi
1420                done
1421                if [[ $answer = k ]]
1422                then
1423                   locat=user_abort; exit
1424                fi
1425             fi
1426          fi
1427
1428
1429             # TAR NEW VERSION ON LOCAL HOST
1430          printf "\n  *** tar update on local host ..."
1431          tar -cf  ${mainprog}_current_version.tar  *.$suf *.o *.mod
1432
1433
1434          # COMPILE THE UTILITY PROGRAMS
1435       elif [[ $compile_utility_programs = true ]]
1436       then
1437          printf "\n\n"
1438          echo "  *** compiling the utility programs ..."
1439          cd ${local_source_path}/../UTIL
1440
1441             # TOUCH FILES IN ORDER TO FORCE COMPILATION FOR EVERY BLOCK
1442          touch  *.f90
1443          make  $make_options  BLOCK=$block  F90=$compiler_name  F90_SER=$compiler_name_ser  COPT="$cpp_options"  F90FLAGS="$compiler_options"  LDFLAGS="$loader_options"
1444
1445             # CHECK IF QMAKE IS AVAILABLE AND COMPILE MRUNGUI
1446          if [[ $util_compiled_localhost == false ]]
1447          then
1448             printf "\n\n"
1449             echo "  *** compiling the mrun GUI"
1450             if which qmake >/dev/null; then
1451                cd mrungui
1452                touch *
1453                qmake
1454                make
1455                make clean
1456                rm Makefile
1457                cd ..
1458             else
1459                echo "  +++ no qmake found. The (optional) GUI will not be compiled."
1460             fi
1461
1462             # COMPILE CHECK_NAMELIST_FILES (ONLY FOR ONE BRANCH on LOCALHOST NEEDED)
1463
1464             printf "\n\n"
1465             echo "  *** compiling check_namelist_files ..."
1466
1467             # GET CHECK OPTIONS
1468             line=""
1469             found=false
1470             grep  "$remote_host_string" $config_file | grep "%cpp_options"  >  $tmp_mbuild
1471             while read line1
1472             do
1473
1474                if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
1475                then
1476                   line="$line1"
1477                fi
1478
1479                if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
1480                then
1481                   # EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING UND ALLE -D ENTFERNEN
1482                   line="$line "
1483                   copts_check=`echo $line | cut -d" " -s -f2 | sed 's/::/%DUM%/g' | sed 's/:/ /g' | sed 's/%DUM%/:/g' | sed 's/-D[^ ]* //g' | sed 's/ -D.*//g'`
1484                   found=true
1485                fi
1486
1487             done < $tmp_mbuild
1488             copts_check="$copts_check -D__check -D__parallel"
1489
1490             check_depository_path=${local_source_path}/../UTIL
1491             cd $check_depository_path
1492             mkdir check_tmp
1493             cp ${local_source_path}/${mainprog}_sources_check.tar ./check_tmp
1494             cd check_tmp
1495             tar -xf  ${mainprog}_sources_check.tar
1496             rm -rf ${mainprog}_sources_check.tar
1497
1498             make  -f Makefile_check $make_options  F90=$compiler_name_ser  COPT="$copts_check"  F90FLAGS="$compiler_options"
1499             tar -cf  check_namelist_files.tar Makefile_check check_namelist_files.x *.f90 *.o *.mod
1500             mv check_namelist_files.tar $check_depository_path
1501             mv check_namelist_files.x $PALM_BIN
1502             cd $check_depository_path
1503             rm -rf check_tmp
1504             util_compiled_localhost=true
1505          else
1506             cd $check_depository_path
1507             printf "\n\n"
1508             echo "  *** skipped compilation of mrun GUI."       
1509             printf "\n\n"
1510             echo "  *** skipped compilation of check_namelist_files."           
1511          fi
1512
1513       fi
1514    fi
1515 done
1516
1517
1518 if [[ $host_found = false ]]
1519 then
1520    if [[ $host = all ]]
1521    then
1522       printf "\n  +++ no hosts found in configuration file"
1523    else
1524       printf "\n  +++ host \"$host\" not found in configuration file"
1525    fi
1526    locat=config_file; exit
1527 fi
1528
1529 if [[ "$block_conditions" != none  &&  $block_conditions_found = false ]]
1530 then
1531    printf "\n  +++ block conditions \"$block_conditions\" not found for host \"$host\""
1532 fi
1533
1534
1535    # FINAL WORK
1536 rm -f  hosts_found_in_config_file
1537 rm -f ${local_source_path}/${mainprog}_sources_check.tar
1538
Note: See TracBrowser for help on using the repository browser.