Home

Context Navigation

source: palm/trunk/SCRIPTS/mbuild @ 1016

Last change on this file since 1016 was 1009, checked in by raasch, 12 years ago
test print statement removed
Property svn:keywords set to `Id Rev`
File size: 54.1 KB

Line
1	#!/bin/ksh
2	# mbuild - script for compiling the PALM code and its utility programs
3	# $Id: mbuild 1009 2012-09-20 07:59:17Z raasch $
4
5	# Procedure to compile code on local and remote hosts using the
6	# make-mechanism. The source code must be provided on the local host.
7
8	# Last changes:
9	# 06/05/02 - Siggi - start development
10	# 12/06/02 - Siggi - first version finished
11	# 12/09/02 - Siggi - ibmh (hanni.hlrn.de) included
12	# 19/12/02 - Siggi - ibmb included
13	# 05/02/03 - Siggi - hostname nobela included
14	# 04/03/03 - Siggi - host nech included
15	# 06/03/03 - Siggi - make_call_string is echoed without '' to
16	# file LAST_MAKE_CALL (otherwise error on NEC, because
17	# '' are part of compiler options
18	# 16/03/03 - Siggi - Two underscores are placed in front of every define
19	# string, in case that palm.f90 version contains
20	# such strings
21	# 16/04/03 - Siggi - First extensions for linux machines
22	# 24/06/03 - Siggi - host orkan included
23	# 17/07/03 - Siggi - IP adress set to new "cross" machine at DKRZ
24	# 24/07/03 - Siggi - host maestro admitted
25	# 06/08/03 - Siggi - host gregale admitted
26	# 05/11/03 - Siggi - hosts irifi and quanero are now belonging to lcmuk
27	# 19/11/03 - Heiko - on lcmuk, mbuild does not tar the *.i files
28	# 08/01/04 - Siggi - additional preprocessor directive for ibm included
29	# (-D$OMP=OMP) in order to avoid problems with
30	# OMP_NUM_THREADS
31	# 09/01/04 - Siggi - action above cancelled
32	# 28/01/04 - Siggi - action above re-cancelled
33	# 08/03/04 - Siggi - host scirocco admitted
34	# 26/03/04 - Siggi - .o and .mod files are also deleted in depository, if
35	# the respective .f90 file is not listed in the makefile
36	# and deletion is demanded by the user
37	# 12/04/04 - Siggi - scp2 instead of scp used for transfer from decalpha
38	# due to error in ssh installation (otherwise a prompt
39	# for the password appears)
40	# 23/07/04 - Siggi - changes due to the new berni configuration
41	# (federation switch)
42	# 08/09/04 - Siggi - hanni IP address changed to 130.75.4.10
43	# 23/09/04 - Joerg - correction of IP-Address for 'cross' (DKRZ)
44	# 09/03/05 - Siggi - on nech, mbuild does not tar the *.i files
45	# 31/03/05 - Siggi - mbuild does not tar *.i files any more
46	# 24/04/05 - Siggi - netcdf support on lcmuk
47	# 25/04/05 - Siggi - netcdf support on gfdl3 (decalpha)
48	# 12/05/05 - Siggi - netcdf support on ibm
49	# set OBJECT_MODE=64 for compiling on ibmb, ibmh
50	# 18/05/05 - Siggi - netcdf support on nec
51	# 19/05/05 - Siggi - IP addres 134.75.155.74 changed to 165.132.26.56
52	# 23/05/05 - Siggi - netcdf support on ibms
53	# 01/06/05 - Siggi - reset of cpp_options to "" on lcmuk
54	# 30/06/05 - Siggi - netcdf support on bora
55	# 20/10/05 - Siggi - update of netcdf-version on decalpha (gfdl3)
56	# 04/11/05 - Siggi - netcdf 3.6.0-p1 on ibmh/ibmb
57	# 30/12/05 - Siggi - change of IP adresses in subnet 130.75.105
58	# host gfdl5 (ibmy) admitted
59	# 10/01/06 - Siggi - cpp directive for NetCDF 64bit support
60	# 20/01/06 - Siggi - cpp directive for ibmy
61	# 09/02/06 - Marcus- compile only once on lcmuk (as on ibmh/ibmb)
62	# 10/02/06 - Siggi - modifications for scp on decalpha
63	# 13/04/06 - Siggi - ostria admitted
64	# 19/04/06 - Siggi - preprocessor directive -D$OMP=OMP for ibm removed
65	# 23/05/05 - Siggi - lctit (SUN Fire X4600) admitted
66	# 29/05/05 - Siggi - atmos (lcide) admitted
67	# 23/08/06 - Siggi - netcdf support for scirocco (notebook)
68	# 24/11/06 - Siggi - breva and levanto admitted
69	# 07/02/07 - Siggi - adapted for RIAM (neck)
70	# 10/02/07 - Siggi - all hpmuk-related code removed
71	# 02/03/07 - Siggi - compilation of utility programs and transfer of
72	# scripts to remote hosts added (option -u)
73	# 14/03/07 - Siggi - fimm admitted, revision number added to terminal
74	# output
75	# 16/03/07 - Siggi - adjustments (netcdf) for lctit
76	# adjustments for running under pdksh, local ip-addres
77	# is not determined any more
78	# 30/03/07 - Siggi - cpp-directives/options + netcdf-options are read
79	# from configuration file
80	# host identifier (local_host) is read from config file
81	# 10/10/07 - Siggi - bugfix: handling of comment lines
82	# 18/07/08 - Siggi - adapted for lcsgih
83	# 21/07/08 - Siggi - mainprog (executable) is added to the tar-file
84	# ({mainprog}_current_version)
85	# 02/10/08 - Siggi - adapted for lcxt4
86	# 14/11/08 - Siggi - update mechanism completely revised: source tarfile
87	# remains in source directory, one depository per block
88	# (given in the config-file) is created, allways all
89	# files from the source directory are copied to the
90	# respective depository, no additional file checks are
91	# done any more (version 2.1)
92	# 13/01/09 - Marcus- re-enable compilation more than once on lcmuk (as on
93	# other machines)
94	# 21/03/09 - Siggi - -u copies also copies process_dvr_output and
95	# .dvrserver.config
96	# 21/04/09 - Siggi - adjustments for new IBM at DKRZ, which is now ibmh
97	# 25/08/09 - BjornM- adapted for lck
98	# 01/12/09 - BjornM- re-adjustments for lcxt4
99	# 01/02/10 - Siggi - adjustments for lcxt5m
100	# 03/02/10 - Siggi - make options (mopts) to be set by configuration file
101	# implemented, remoted mode option -r completely
102	# removed, t3e related parts removed
103	# 26/02/10 - BjornM- re-adjustments for lcxt4 (new modules)
104	# 01/03/10 - Siggi - mpilib replaced by modules: explicit module settings
105	# removed; modules should now be given in the
106	# configuration file
107	# 02/03/10 - Siggi - utility programs are created separately for each
108	# block in the configuration file,
109	# parallel make for utility programs
110	# 12/03/10 - Siggi - bugfix: remode_md was given a wrong value
111	# 16/08/10 - BjornM- bugfix: call of modules on local host, new workaround
112	# for lcxt4
113	# 07/09/10 - Siggi - bugfix for wrong netcdf/3.6.3 module on lcsgi
114	# 08/12/10 - Siggi - initialization of the module command changed for
115	# SGI-ICE/lcsgi
116	# adjustments for Kyushu Univ. (lcrte, ibmku)
117	# 14/12/10 - Siggi - adjustments for new Tsubame system at Tokyo
118	# institute of technology (lctit)
119	# 04/03/11 - BjornM- re-adjustments for lcxt4
120	# 06/03/11 - Siggi - adjustments for ibmkisti
121	# 03/04/11 - Micha - added lckordi
122	# 17/08/11 - Siggi - HLRN access via hicegate0 (130.75.4.101)
123	# 27/11/11 - Siggi - Bugfix for make options setting (-j)
124	# 12/12/11 - BjornM- added mrun GUI to ulitity programs
125	# 25/01/12 - BjornM- compilation of check_namelist_files (namelist file
126	# check program) has been added to the utility branch),
127	# modfified the compilation of mrungui
128	# 31/01/12 - BjornM- bugfix for compilation of utility programs on
129	# multiple localhost branches
130	# 08/03/12 - BjornM- bugfix: cpp directive for namelist check program
131	# corrected
132	# 02/05/12 - Bjoern- lcxt4 is now lcxe6, adjustments for lcxe6,
133	# bugfixes for the parameter file check, initial
134	# commands on ssh calls sourced out to .mrun.config
135	# 05/06/12 - Bjoern- bugfixes for execution of login_init_cmd
136	# 18/06/12 - Siggi - option -v (silent mode) added
137	# 25/06/12 - Siggi - option -K (block conditions) added
138
139
140	# VARIABLE DECLARATIONS + DEFAULT VALUES
141	block_conditions=none
142	block_conditions_found=false
143	compile_utility_programs=false
144	config_file=.mrun.config
145	fimm=false
146	host=all
147	host_found=false
148	locat=normal
149	makefile=""
150	module_calls=""
151	util_compiled_localhost=false
152	scirocco=false
153	silent=false
154	suf=f90
155	update=false
156	working_directory=`pwd`
157
158	typeset -i ih ihost=0
159
160	typeset -R30 calltime
161	typeset -L20 column1
162	typeset -L50 column2
163	typeset -L70 column3
164	typeset -L40 version="MBUILD 2.1 Rev$Rev: 1009 $"
165
166	# ERROR HANDLING
167	# IN CASE OF EXIT:
168	trap 'rm -rf $working_directory/tmp_mbuild
169	if [[ $locat != normal ]]
170	then
171	printf "\n\n +++ mbuild killed \n\n"
172	else
173	printf "\n\n *** mbuild finished \n\n"
174	fi' exit
175
176
177	# IN CASE OF TERMINAL-BREAK:
178	trap 'rm -rf $working_directory/tmp_mbuild
179	printf "\n\n +++ mbuild killed by \"^C\" \n\n"
180	exit
181	' 2
182
183
184	tmp_mbuild=${working_directory}/tmp_mbuild
185
186	# READ SHELLSCRIPT-OPTIONS
187	while getopts :c:h:K:m:s:uv option
188	do
189	case $option in
190	(c) config_file=$OPTARG;;
191	(h) host=$OPTARG;;
192	(K) block_conditions=$OPTARG;;
193	(m) makefile=$OPTARG;;
194	(s) suf=$OPTARG;;
195	(u) compile_utility_programs=true;;
196	(v) silent=true;;
197	(\?) printf "\n +++ unknown option $OPTARG \n";
198	locat=parameter; exit;;
199	esac
200	done
201
202
203
204	# CHECK, IF CONFIGURATION-FILE EXISTS
205	if [[ ! -f $config_file ]]
206	then
207	printf "\n +++ configuration file: "
208	printf "\n $config_file"
209	printf "\n does not exist"
210	locat=configuration; exit
211	fi
212
213
214
215	# DETERMINE THE LOCAL HOST
216	local_host_real_name=$(hostname)
217	# local_addres=$(nslookup `hostname` 2>&1 \| grep "Address:" \| tail -1 \| awk '{print $2}')
218
219
220
221	# DETERMINE HOST-IDENTIFIER (local_host) FROM THE CONFIG-FILE
222	line=""
223	grep "%host_identifier" $config_file > $tmp_mbuild
224	while read line
225	do
226	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
227	then
228	HOSTNAME=`echo $line \| cut -d" " -s -f2`
229	host_identifier=`echo $line \| cut -d" " -s -f3`
230	if [[ $local_host_real_name = $HOSTNAME ]]
231	then
232	local_host=$host_identifier
233	break
234	fi
235	fi
236	done < $tmp_mbuild
237
238	if [[ "$local_host" = "" ]]
239	then
240	printf "\n +++ no host identifier found in configuration file \"$config_file\""
241	printf "\n for local host \"$local_host_real_name\"."
242	printf "\n Please add line"
243	printf "\n \"\%host_identifier $local_host_real_name <identifier>\""
244	printf "\n to the configuration file."
245	locat=local_host; exit
246	fi
247
248
249
250	[[ $local_host_real_name = scirocco ]] && scirocco=true
251	[[ $local_host_real_name = fimm.bccs.uib.no ]] && fimm=true
252
253
254
255	if [[ $local_host != ibms ]]
256	then
257	config_file=$PWD/$config_file
258	else
259	config_file=`pwd`/$config_file
260	fi
261
262
263	# determine the block conditions
264	if [[ $block_conditions != none ]]
265	then
266	block_condition1=`echo $block_conditions \| cut -d" " -f1`
267	block_condition2=`echo $block_conditions \| cut -d" " -f2`
268	if [[ "$block_condition2" = "$block_condition1" ]]
269	then
270	block_condition2=""
271	fi
272	fi
273
274
275	# DETERMINE USER NAME ON LOCAL HOST FROM THE CONFIG-FILE
276	line=""
277	grep " $local_host" $config_file \| grep "%remote_username" > $tmp_mbuild
278	while read line
279	do
280	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
281	then
282	local_username=`echo $line \| cut -d" " -s -f2`
283	fi
284	done < $tmp_mbuild
285
286
287	if [[ "$local_username" = "" ]]
288	then
289	printf "\n +++ no user name found in configuration file"
290	printf "\n for local host \"$local_host\" "
291	locat=config_file; exit
292	fi
293
294
295	# DETERMINE LOCAL SOURCE-CODE PATH.
296	# FIRST CHECK, IF A GLOBAL SOURCE-CODE PATH HAS BEEN DECLARED FOR ALL HOSTS.
297	# THEREFORE, FIRST SET ALL GLOBAL VARIABLES DECLARED IN THE CONFIG-FILE,
298	# BECAUSE THEY MAY BE USED AS PART OF THE PATH NAME.
299	line=""
300	grep "%" $config_file > $tmp_mbuild
301	while read line
302	do
303	if [[ "$line" != "" && "$(echo $line \| cut -d" " -s -f3)" = "" && $(echo $line \| cut -c1) != "#" ]]
304	then
305	var=`echo $line \| cut -d" " -s -f1 \| cut -c2-`
306	value=`echo $line \| cut -d" " -s -f2`
307	eval export $var=\$value
308	fi
309	done < $tmp_mbuild
310
311	# NOW CHECK, IF A GLOBAL SOURCE-CODE-PATH HAS BEEN DECLARED
312	line=""
313	grep "%source_path" $config_file > $tmp_mbuild
314	while read line
315	do
316	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
317	then
318	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
319	then
320	global_source_path=`echo $line \| cut -d" " -s -f2`
321	fi
322	fi
323	done < $tmp_mbuild
324
325	line=""
326	grep " $local_host" $config_file \| grep "%source_path" > $tmp_mbuild
327	while read line
328	do
329	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
330	then
331	local_source_path=`echo $line \| cut -d" " -s -f2`
332	fi
333	done < $tmp_mbuild
334
335	if [[ "$local_source_path" = "" ]]
336	then
337	if [[ "$global_source_path" != "" ]]
338	then
339	local_source_path=$global_source_path
340	else
341	printf "\n +++ no source path found in configuration file"
342	printf "\n for local host \"$local_host\" "
343	printf "\n please set \"\%source_path\" in configuration file"
344	locat=config_file; exit
345	fi
346	fi
347	eval local_source_path=$local_source_path
348	eval local_source_path=$local_source_path
349
350
351
352	# DETERMINE GLOBAL DEPOSITORY-PATH
353	line=""
354	grep "%depository_path" $config_file > $tmp_mbuild
355	while read line
356	do
357	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
358	then
359	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
360	then
361	global_depository_path=`echo $line \| cut -d" " -s -f2`
362	fi
363	fi
364	done < $tmp_mbuild
365
366	if [[ $found = false ]]
367	then
368	printf "\n +++ no \%depository_path found in"
369	printf "\n $config_file"
370	locat=depository_path; exit
371	fi
372
373	# CHECK, IF A MAIN PROGRAM HAS BEEN DEFINED IN THE CONFIG-FILE
374	if [[ $(grep -c "%mainprog" $config_file) != 1 ]]
375	then
376	printf "\n +++ no main program or more than one main program defined"
377	printf "\n in configuration file"
378	locat=configuration; exit
379	else
380	line=`grep "%mainprog" $config_file`
381	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
382	then
383	printf "\n +++ no main program defined in configuration file"
384	locat=configuration; exit
385	fi
386	mainprog=`echo $line \| cut -d" " -s -f2 \| cut -d"." -f1`
387	fi
388
389
390
391	# CHECK IF MAKEFILE EXITS
392	[[ "$makefile" = "" ]] && makefile=$local_source_path/Makefile
393	if [[ ! -f $makefile ]]
394	then
395	printf "\n +++ makefile: "
396	printf "\n $makefile"
397	printf "\n does not exist"
398	locat=makefile; exit
399	fi
400
401
402	# HEADER-OUTPUT (PART1: MESSAGES CONCERNING THE LOCAL HOST)
403	calltime=$(date)
404	printf "\n"
405	printf "#------------------------------------------------------------------------# \n"
406	printf "\| $version$calltime \| \n"
407	printf "\| \| \n"
408	column1="called on:"; column2=$local_host_real_name
409	printf "\| $column1$column2 \| \n"
410	column1="local username:"; column2=$local_username
411	printf "\| $column1$column2 \| \n"
412	column1="local IP-addres:"; column2=$local_addres
413	printf "\| $column1$column2 \| \n"
414	column1="config file:"; column2=$config_file
415	printf "\| $column1$column2 \| \n"
416	column1="makefile:"; column2=$makefile
417	printf "\| $column1$column2 \| \n"
418	column1="local source path:"; column2=$local_source_path
419	printf "\| $column1$column2 \| \n"
420	printf "#------------------------------------------------------------------------# \n"
421
422	# printf "\| \| \n"
423
424
425	if [[ $compile_utility_programs = false ]]
426	then
427
428	# IN ANY CASE, GIVE ALL FILES WRITE-PERMIT, IN ORDER TO AVOID PROBLEMS
429	# WITH OVERWRITING FILES ON THE REMOTE HOST
430	cd $local_source_path
431	printf "\n\n *** tar of makefile and source files in $local_source_path"
432	tar -cf ${mainprog}_sources.tar Makefile *.$suf
433	printf "\n"
434
435	else
436	cd $local_source_path
437	printf "\n\n *** tar of makefile and source files in $local_source_path"
438
439	cat Makefile_check\|while read line
440	do
441	line=$(echo $line\|grep RCS)
442	if [[ $line == "RCS" ]]
443	then
444	line=$(echo $line\|sed 's/RCS = //g')
445	break
446	fi
447	done
448
449	tar -cf ${mainprog}_sources_check.tar Makefile_check $line
450	printf "\n"
451	fi
452
453
454
455	# GET CONFIRMATION TO CONTINUE
456	if [[ $host = all ]]
457	then
458	printf "\n *** updates will be made for ALL hosts found in"
459	printf "\n the configuration file"
460	else
461	printf "\n *** update will be made for host \"$host\" "
462	fi
463
464	if [[ $silent = false ]]
465	then
466	answer=dummy
467	printf "\n\n"
468	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
469	do
470	printf " >>> continue (y/n) ? "
471	read answer
472	done
473	if [[ $answer = n \|\| $answer = N ]]
474	then
475	locat=user_abort; exit
476	fi
477	fi
478
479
480
481
482	# GENERIERUNG DER AKTUELLEN MODELLVERSION FUER ALLE RECHNER-/UEBERSETZUNGS-
483	# VERSIONEN, DIE IN DER KONFIGURATIONSDATEI GEFUNDEN WERDEN
484	printf "\n *** scanning configuration file for host(s) ..."
485
486	grep %fopts $config_file > $tmp_mbuild
487	while read line
488	do
489	# KOMMENTARZEILEN UEBERSPRINGEN
490	[[ $(echo $line \| cut -c1) = "#" ]] && continue
491	(( ihost = ihost + 1 ))
492	hostline[$ihost]="$line"
493	done < $tmp_mbuild
494
495
496	while (( ih < ihost ))
497	do
498
499	(( ih = ih + 1 ))
500
501	# determine remote host and conditions for the respective block
502	# continue, only if this host has been chosen via -h option and if
503	# conditions have been chosen via -K option
504	remote_host_string=`echo ${hostline[$ih]} \| cut -d" " -s -f3-`
505	remote_host=`echo $remote_host_string \| cut -d" " -f1`
506	if [[ $host != all ]]
507	then
508	[[ $remote_host != $host ]] && continue
509	fi
510	host_found=true
511	condition1=`echo $remote_host_string \| cut -d" " -s -f2`
512	if [[ $condition1 = $remote_host ]]
513	then
514	condition1=""
515	else
516	condition2=`echo $remote_host_string \| cut -d" " -s -f3`
517	fi
518
519	if [[ $block_conditions != none ]]
520	then
521	if [[ "$condition1" != "$block_condition1" \|\| "$condition2" != "$block_condition2" ]]
522	then
523	continue
524	fi
525	block_conditions_found=true
526	fi
527
528	modules=""
529	netcdf_inc=""
530	netcdf_lib=""
531	make_options=""
532
533	# IP-ADRESSE DES REMOTE-RECHNERS BESTIMMEN
534	case $remote_host in
535	(lckordi) remote_adress=210.219.61.8;;
536	(lcmuk) remote_addres=130.75.105.2;;
537	(lcrte) remote_addres=133.5.185.60;;
538	(lcsgib) remote_addres=130.73.232.102;;
539	(lcsgih) remote_addres=130.75.4.101;;
540	(lck) remote_addres=165.132.26.61;;
541	(lctit) remote_addres=10.1.6.170;;
542	(lcxe6) remote_addres=129.177.20.113;;
543	(lcxt5m) remote_addres=193.166.211.144;;
544	(decalpha) remote_addres=165.132.26.56;;
545	(ibmh) remote_addres=136.172.40.15;;
546	(ibmkisti) remote_addres=150.183.146.24;;
547	(ibmku) remote_addres=133.5.4.129;;
548	(ibms) remote_addres=150.183.5.101;;
549	(ibmy) remote_addres=165.132.26.58;;
550	(nech) remote_addres=136.172.44.192;;
551	(neck) remote_addres=133.5.178.11;;
552	(ground.yonsei.ac.kr) remote_addres=134.75.155.33;;
553	(*) if [[ $local_host != $remote_host ]]
554	then
555	printf "\n +++ remote host \"$remote_host\" unknown";
556	printf "\n please inform PALM group support!"
557	fi;;
558	esac
559
560
561	# REMOTE-USERNAMEN ERMITTELN
562	line=""
563	found=false
564	grep "$remote_host_string" $config_file \| grep "%remote_username" > $tmp_mbuild
565	while read line1
566	do
567
568	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
569	then
570	line="$line1"
571	fi
572
573	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
574	then
575	remote_username=`echo $line \| cut -d" " -s -f2`
576	found=true
577	fi
578
579	done < $tmp_mbuild
580
581	if [[ $found = false ]]
582	then
583	printf "\n +++ no remote username found in configuration file"
584	printf "\n for \"$remote_host_string\" "
585	locat=config_file; exit
586	fi
587
588
589	# REMOTE-QUELLTEXTPFAD ERMITTELN
590	line=""
591	remote_source_path=""
592	grep "$remote_host_string" $config_file \| grep "%source_path" > $tmp_mbuild
593	while read line1
594	do
595
596	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
597	then
598	line="$line1"
599	fi
600
601	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
602	then
603	remote_source_path=`echo $line \| cut -d" " -s -f2`
604	fi
605
606	done < $tmp_mbuild
607
608	if [[ "$remote_source_path" = "" ]]
609	then
610	if [[ "$global_source_path" != "" ]]
611	then
612	remote_source_path=$global_source_path
613	else
614	printf "\n +++ no source path found in configuration file"
615	printf "\n for \"$remote_host_string\" "
616	locat=config_file; exit
617	fi
618	fi
619
620	remote_ud=${remote_source_path}/../UTIL
621	remote_ud=$(eval echo $remote_ud)
622
623
624	# REMOTE-PFAD FUER MAKE-DEPOSITORY ERMITTELN
625	remote_md=""
626	line=""
627	grep "$remote_host_string" $config_file \| grep "%depository_path" > $tmp_mbuild
628	while read line1
629	do
630
631	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
632	then
633	line="$line1"
634	fi
635
636	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
637	then
638	remote_md=`echo $line \| cut -d" " -s -f2`
639	fi
640
641	done < $tmp_mbuild
642
643	if [[ "$remote_md" = "" ]]
644	then
645	if [[ "$global_depository_path" != "" ]]
646	then
647	remote_md=$global_depository_path
648	else
649	printf "\n +++ no depository path found in configuration file"
650	printf "\n for \"$remote_host_string\" "
651	printf "\n please set \"\%depository_path\" in configuration file"
652	locat=config_file; exit
653	fi
654	fi
655
656	remote_md=$(eval echo $remote_md)
657	block=""
658	[[ "$condition1" != "" ]] && block=_$condition1
659	[[ "$condition2" != "" ]] && block=${block}_$condition2
660	remote_md=${remote_md}$block
661
662
663	# COMPILERNAMEN ERMITTELN
664	line=""
665	found=false
666	grep "$remote_host_string" $config_file \| grep "%compiler_name " > $tmp_mbuild
667	while read line1
668	do
669
670	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
671	then
672	line="$line1"
673	fi
674
675	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
676	then
677	compiler_name=`echo $line \| cut -d" " -s -f2`
678	found=true
679	fi
680
681	done < $tmp_mbuild
682
683	if [[ $found = false ]]
684	then
685	printf "\n +++ no compiler name found in configuration file"
686	printf "\n for \"$remote_host_string\" "
687	locat=config_file; exit
688	fi
689
690
691	# BEI BENUTZUNG EINES PARALLELEN COMPILERS MUSS AUCH EIN
692	# SERIELLER COMPILERNAME ERMITTELT WERDEN
693	if [[ $(echo $remote_host_string \| grep -c parallel) = 1 ]]
694	then
695	line=""
696	found=false
697	grep "$remote_host_string" $config_file \| grep "%compiler_name_ser" > $tmp_mbuild
698	while read line1
699	do
700
701	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
702	then
703	line="$line1"
704	fi
705
706	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
707	then
708	compiler_name_ser=`echo $line \| cut -d" " -s -f2`
709	found=true
710	fi
711
712	done < $tmp_mbuild
713
714	if [[ $found = false ]]
715	then
716	printf "\n +++ no serial compiler name found in configuration file"
717	printf "\n for \"$remote_host_string\" "
718	locat=config_file; exit
719	fi
720	else
721	compiler_name_ser=$compiler_name
722	fi
723
724
725
726	# PRAEPROZESSOR-OPTIONEN/DIREKTIVEN ERMITTELN
727	line=""
728	found=false
729	grep "$remote_host_string" $config_file \| grep "%cpp_options" > $tmp_mbuild
730	while read line1
731	do
732
733	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
734	then
735	line="$line1"
736	fi
737
738	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
739	then
740	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
741	cpp_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
742	found=true
743	fi
744
745	done < $tmp_mbuild
746
747	if [[ $found = false ]]
748	then
749	printf "\n +++ no preprocessor options found in configuration file"
750	printf "\n for \"$remote_host_string\" "
751	locat=config_file; exit
752	fi
753
754
755	# RECHNERSPEZIFISCHE CPP-DIREKTIVEN HINZUFUEGEN
756	for string in $remote_host_string
757	do
758	if [[ $(echo $remote_host \| cut -c1-2) = lc && $(echo $string \| cut -c1-2) = lc ]]
759	then
760	cpp_options="$cpp_options -D__lc "
761	elif [[ $(echo $remote_host \| cut -c1-3) = ibm && $(echo $string \| cut -c1-3) = ibm ]]
762	then
763	cpp_options="${cpp_options},-D__ibm"
764	elif [[ $(echo $remote_host \| cut -c1-3) = nec && $(echo $string \| cut -c1-3) = nec ]]
765	then
766	cpp_options="${cpp_options} -D__nec"
767	else
768	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
769	then
770	cpp_options="${cpp_options},-D__$string"
771	else
772	cpp_options="$cpp_options -D__$string "
773	fi
774	fi
775	done
776
777
778
779	# NETCDF-OPTIONEN ERMITTELN
780	line=""
781	grep "$remote_host_string" $config_file \| grep "%netcdf_inc" > $tmp_mbuild
782	while read line1
783	do
784
785	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
786	then
787	line="$line1"
788	fi
789
790	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
791	then
792	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
793	netcdf_inc=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
794	fi
795
796	done < $tmp_mbuild
797
798	line=""
799	grep "$remote_host_string" $config_file \| grep "%netcdf_lib" > $tmp_mbuild
800	while read line1
801	do
802
803	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
804	then
805	line="$line1"
806	fi
807
808	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
809	then
810	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
811	netcdf_lib=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
812	fi
813
814	done < $tmp_mbuild
815
816
817
818	# get make options
819	line=""
820	found=false
821	grep "$remote_host_string" $config_file \| grep "%mopts" > $tmp_mbuild
822	while read line1
823	do
824
825	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
826	then
827	line="$line1"
828	fi
829
830	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
831	then
832	# remove colons from directive string
833	make_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
834
835	fi
836
837	done < $tmp_mbuild
838
839
840
841	# COMPILEROPTIONEN ERMITTELN
842	line=""
843	found=false
844	grep "$remote_host_string" $config_file \| grep "%fopts" > $tmp_mbuild
845	while read line1
846	do
847
848	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
849	then
850	line="$line1"
851	fi
852
853	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
854	then
855	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
856	compiler_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
857	found=true
858
859	# NETCDF-INCLUDEVERZEICHNIS HINZUFUEGEN
860	compiler_options="$compiler_options $netcdf_inc"
861	fi
862
863	done < $tmp_mbuild
864
865	if [[ $found = false ]]
866	then
867	printf "\n +++ no compiler options found in configuration file"
868	printf "\n for \"$remote_host_string\" "
869	locat=config_file; exit
870	fi
871
872
873	# get login init commands, "::" is replacing a space
874	line=""
875	grep "$remote_host_string" $config_file \| grep "%login_init_cmd" > $tmp_mbuild
876	while read line1
877	do
878
879	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
880	then
881	line="$line1"
882	fi
883
884	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
885	then
886	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
887	init_cmds=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
888	fi
889	init_cmds="${init_cmds};"
890	done < $tmp_mbuild
891
892
893	# get modules to be loaded
894	line=""
895	grep "$remote_host_string" $config_file \| grep "%modules" > $tmp_mbuild
896	while read line1
897	do
898
899	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
900	then
901	line="$line1"
902	fi
903
904	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
905	then
906	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
907	modules=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
908	fi
909
910	done < $tmp_mbuild
911
912
913	# LADER-OPTIONEN ERMITTELN
914	line=""
915	found=false
916	grep "$remote_host_string" $config_file \| grep "%lopts" > $tmp_mbuild
917	while read line1
918	do
919
920	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
921	then
922	line="$line1"
923	fi
924
925	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
926	then
927	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
928	loader_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
929	found=true
930
931	# NETCDF-LIBRARY HINZUFUEGEN
932	loader_options="$loader_options $netcdf_lib"
933	fi
934
935	done < $tmp_mbuild
936
937	if [[ $found = false ]]
938	then
939	printf "\n +++ no loader options found in configuration file"
940	printf "\n for \"$remote_host_string\" "
941	locat=config_file; exit
942	fi
943
944
945	printf "\n\n#------------------------------------------------------------------------# \n"
946	if [[ $remote_host = $local_host ]]
947	then
948	column1="remote_host:"; column2="$remote_host (= local host!)"
949	else
950	column1="remote_host:"; column2=$remote_host
951	fi
952	printf "\| $column1$column2 \| \n"
953	printf "\| \| \n"
954	column1="conditions:"; column2="$condition1 $condition2"
955	printf "\| $column1$column2 \| \n"
956	column1="make depository:"; column2=$remote_md
957	printf "\| $column1$column2 \| \n"
958	line=$(echo "$remote_md" \| cut -c51-)
959	while [[ "$line" != "" ]]
960	do
961	column1=""
962	column2=$line
963	printf "\| $column1$column2 \| \n"
964	line=$(echo "$line" \| cut -c51-)
965	done
966	if [[ $compile_utility_programs = true ]]
967	then
968	column1="utility directory:"; column2=$remote_ud
969	printf "\| $column1$column2 \| \n"
970	fi
971	column1="username:"; column2=$remote_username
972	printf "\| $column1$column2 \| \n"
973	column1="addres:"; column2=$remote_addres
974	printf "\| $column1$column2 \| \n"
975	column1="compiler:"; column2=$compiler_name
976	printf "\| $column1$column2 \| \n"
977	if [[ $compile_utility_programs = true ]]
978	then
979	column1="serial compiler:"; column2=$compiler_name_ser
980	printf "\| $column1$column2 \| \n"
981	fi
982	if [[ "$make_options" != "" ]]
983	then
984	column1="make options:"; column2=$make_options
985	printf "\| $column1$column2 \| \n"
986	fi
987	column1="cpp options:"; column2=$cpp_options
988	printf "\| $column1$column2 \| \n"
989	line=$(echo "$cpp_options" \| cut -c51-)
990	while [[ "$line" != "" ]]
991	do
992	column1=""
993	column2=$line
994	printf "\| $column1$column2 \| \n"
995	line=$(echo "$line" \| cut -c51-)
996	done
997	column1="compiler options:"; column2=$compiler_options
998	printf "\| $column1$column2 \| \n"
999	line=$(echo "$compiler_options" \| cut -c51-)
1000	while [[ "$line" != "" ]]
1001	do
1002	column1=""
1003	column2=$line
1004	printf "\| $column1$column2 \| \n"
1005	line=$(echo "$line" \| cut -c51-)
1006	done
1007	column1="loader options:"; column2=$loader_options
1008	printf "\| $column1$column2 \| \n"
1009	line=$(echo "$loader_options" \| cut -c51-)
1010	while [[ "$line" != "" ]]
1011	do
1012	column1=""
1013	column2=$line
1014	printf "\| $column1$column2 \| \n"
1015	line=$(echo "$line" \| cut -c51-)
1016	done
1017	if [[ $modules != "" ]]
1018	then
1019	column1="modules to be load:"; column2=$modules
1020	printf "\| $column1$column2 \| \n"
1021	line=$(echo "$modules" \| cut -c51-)
1022	while [[ "$line" != "" ]]
1023	do
1024	column1=""
1025	column2=$line
1026	printf "\| $column1$column2 \| \n"
1027	line=$(echo "$line" \| cut -c51-)
1028	done
1029	fi
1030	printf "#------------------------------------------------------------------------# \n"
1031
1032	if [[ $silent = false ]]
1033	then
1034	answer=dummy
1035	printf "\n\n"
1036	while [[ "$answer" != y && "$answer" != Y && "$answer" != c && "$answer" != C && "$answer" != s && "$answer" != S && "$answer" != a && "$answer" != A ]]
1037	do
1038	printf " >>> continue (y(es)/c(ontinue)/a(bort)/s(skip)) ? "
1039	read answer
1040	done
1041	if [[ $answer = a \|\| $answer = A ]]
1042	then
1043	locat=user_abort; exit
1044	fi
1045	if [[ $answer = c \|\| $answer = C ]]
1046	then
1047	silent=true
1048	fi
1049	if [[ $answer = s \|\| $answer = S ]]
1050	then
1051	continue
1052	fi
1053	fi
1054
1055
1056	# make on remote host
1057	if [[ $remote_host != $local_host ]]
1058	then
1059	if [[ $compile_utility_programs = false ]]
1060	then
1061
1062	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1063	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
1064	echo " *** copying \"${mainprog}_sources.tar\" to \"${remote_addres}:${remote_md}/\" "
1065	if [[ $remote_host != lctit ]]
1066	then
1067	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})"
1068	else
1069	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1070	# MIT SSH, DESHALB AUFRUF PER PIPE
1071	print "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})" \| ssh ${remote_username}@${remote_addres} 2>&1
1072	fi
1073	if [[ $local_host = decalpha ]]
1074	then
1075	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
1076	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1077	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1078	remote_md=`echo $remote_md \| sed 's/\$HOME\///'`
1079	/bin/scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
1080	else
1081	scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
1082	fi
1083
1084
1085
1086	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
1087	echo " *** untar previous update on remote host, if existing"
1088	if [[ $remote_host != lctit ]]
1089	then
1090	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar"
1091	else
1092	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1093	# MIT SSH, DESHALB AUFRUF PER PIPE
1094	print "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
1095	fi
1096
1097
1098	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
1099	echo " *** untar actual sources on remote host"
1100	if [[ $remote_host != lctit ]]
1101	then
1102	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; tar -xf ${mainprog}_sources.tar"
1103	else
1104	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1105	# MIT SSH, DESHALB AUFRUF PER PIPE
1106	print "cd ${remote_md}; tar -xf ${mainprog}_sources.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
1107	fi
1108
1109
1110	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1111	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
1112	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
1113	# Z.B. DIE PFADE ZUM COMPILER)
1114	echo " *** execute \"make\" on remote host"
1115
1116
1117	# generate make call with make options
1118	if [[ $remote_host = nech ]]
1119	then
1120	make_call_string="sxmake $make_options PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1121	else
1122	make_call_string="make $make_options PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1123	fi
1124
1125	# generate command to load modules, if modules are given
1126	if [[ "$modules" != "" ]]
1127	then
1128	if [[ $remote_host = lctit ]]
1129	then
1130	module_calls=". $modules"
1131	else
1132	module_calls="module load ${modules};"
1133	fi
1134
1135	# bugfix for wrong netcdf module
1136	if [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
1137	then
1138	if [[ $(echo $module_calls \| grep -c netcdf/3.6.3-intel) != 0 ]]
1139	then
1140	module_calls="$module_calls export LD_LIBRARY_PATH=/sw/dataformats/netcdf/3.6.3-intel/lib:\$LD_LIBRARY_PATH;"
1141	fi
1142	fi
1143	else
1144	module_calls=""
1145	fi
1146
1147	if [[ $remote_host = ibmkisti \|\| $remote_host = ibms \|\| $remote_host = ibmy ]]
1148	then
1149
1150	ssh ${remote_username}@${remote_addres} "$init_cmds $module_calls cd ${remote_md}; echo '$make_call_string' > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
1151
1152	elif [[ $remote_host = ibmh ]]
1153	then
1154
1155	print "$init_cmds $module_calls export OBJECT_MODE=64; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1156
1157	elif [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
1158	then
1159	# print ". /usr/share/modules/init/bash; $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1160	print "$init_cmds $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1161
1162	elif [[ $remote_host = lctit ]]
1163	then
1164
1165	echo " " > ${remote_host}_last_make_protokoll
1166	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
1167	do
1168	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1169	done
1170
1171	elif [[ $remote_host = lcxe6 ]]
1172	then
1173
1174	ssh ${remote_username}@${remote_addres} "$init_cmds $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
1175
1176	else
1177
1178	print "$init_cmds $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1179
1180	fi
1181
1182	if [[ $(grep -c MAKE_ERROR ${remote_host}_last_make_protokoll) != 0 ]]
1183	then
1184	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1185	if [[ $silent = false ]]
1186	then
1187	answer=dummy
1188	printf "\n"
1189	while [[ "$answer" != c && "$answer" != k ]]
1190	do
1191	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
1192	read answer
1193	if [[ "$answer" = l ]]
1194	then
1195	more ${remote_host}_last_make_protokoll
1196	fi
1197	done
1198	if [[ $answer = k ]]
1199	then
1200	locat=user_abort; exit
1201	fi
1202	fi
1203	fi
1204
1205
1206
1207	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
1208	printf "\n *** tar update on remote host ..."
1209	if [[ $remote_host != lctit ]]
1210	then
1211	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod"
1212	else
1213	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1214	# MIT SSH, DESHALB AUFRUF PER PIPE
1215	print "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod" \| ssh ${remote_username}@${remote_addres} 2>&1
1216	fi
1217
1218
1219	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
1220	# printf "\n *** \"make clean\" on remote host ..."
1221	# ssh ${remote_username}@${remote_addres} "cd ${remote_md}; make clean; rm ${mainprog}_sources.tar; rm *.f90 Makefile"
1222	# printf "\n"
1223
1224
1225
1226
1227	# GLEICHE AKTIONEN FUER DIE UTILITY-PROGRAMME DURCHFUEHREN
1228	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1229	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
1230	elif [[ $compile_utility_programs = true ]]
1231	then
1232
1233	printf "\n\n"
1234	echo " *** copying scripts and utility programs to \"${remote_addres}:${remote_ud}/\" "
1235	cd ${local_source_path}/../SCRIPTS
1236
1237	if [[ $remote_host != lctit ]]
1238	then
1239	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)"
1240	else
1241	# TIT ERLAUBT NUR DIE AUSFUEHRUNG GANZ BESTIMMTER KOMMANDOS
1242	# MIT SSH, DESHALB AUFRUF PER PIPE
1243	print "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)" \| ssh ${remote_username}@${remote_addres} 2>&1
1244	fi
1245
1246	# KOPIEREN DER SCRIPTE
1247	if [[ $local_host = decalpha ]]
1248	then
1249	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTAENDIGEN PFADES
1250	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1251	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1252	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
1253	/bin/scp batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
1254	else
1255	scp batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
1256	fi
1257
1258	cd - > /dev/null
1259	cd ${local_source_path}/../UTIL
1260
1261
1262	# KOPIEREN DER UTILITY-PROGRAMME
1263	if [[ $local_host = decalpha ]]
1264	then
1265	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
1266	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1267	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1268	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
1269	/bin/scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
1270	else
1271	scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
1272	fi
1273
1274
1275
1276	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1277	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
1278	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
1279	# Z.B. DIE PFADE ZUM COMPILER)
1280	echo " *** execute \"make\" on remote host"
1281
1282	if [[ $remote_host = nech ]]
1283	then
1284	make_call_string="sxmake $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1285	else
1286	make_call_string="make $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1287	fi
1288
1289	# generate command to load modules, if modules are given
1290	if [[ "$modules" != "" ]]
1291	then
1292	if [[ $remote_host = lctit ]]
1293	then
1294	module_calls=". $modules"
1295	else
1296	module_calls="module load ${modules};"
1297	fi
1298
1299	# bugfix for wrong netcdf module
1300	if [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
1301	then
1302	if [[ $(echo $module_calls \| grep -c netcdf/3.6.3-intel) != 0 ]]
1303	then
1304	module_calls="$module_calls export LD_LIBRARY_PATH=/sw/dataformats/netcdf/3.6.3-intel/lib:\$LD_LIBRARY_PATH;"
1305	fi
1306	fi
1307	else
1308	module_calls=""
1309	fi
1310
1311
1312	if [[ $remote_host = ibms \|\| $remote_host = ibmy ]]
1313	then
1314
1315	ssh ${remote_username}@${remote_addres} "$init_cmds $module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR"
1316
1317	elif [[ $remote_host = ibmh ]]
1318	then
1319
1320	print "$init_cmds $module_calls export OBJECT_MODE=64; cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres}
1321
1322	elif [[ $remote_host = lctit ]]
1323	then
1324
1325	echo " " > ${remote_host}_last_make_protokoll
1326	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
1327	do
1328	print "$init_cmds $module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1329	done
1330
1331	elif [[ $remote_host = lcxe6 ]]
1332	then
1333
1334	ssh ${remote_username}@${remote_addres} "$init_cmds $module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
1335
1336	else
1337
1338	print "$init_cmds $module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1339
1340	fi
1341
1342	fi # ENDE UEBERSETZUNG DER UTILITY-PROGRAMME
1343
1344	rm -rf ${remote_host}_last_make_protokoll
1345
1346	# make on local host
1347	else
1348
1349	# workaround for lcxe6
1350	if [[ $remote_host = lcxe6 ]]
1351	then
1352
1353	eval $init_cmds
1354
1355	fi
1356
1357	# first load modules, if given
1358	if [[ "$modules" != "" ]]
1359	then
1360	if [[ $remote_host = lctit ]]
1361	then
1362	. $modules
1363	else
1364	module load ${modules}
1365	fi
1366	fi
1367
1368
1369	if [[ $compile_utility_programs = false ]]
1370	then
1371
1372	# DEPOSITORY VERZEICHNIS ERZEUGEN, FALLS NOCH NICHT VORHANDEN
1373	eval remote_md=$remote_md
1374	if [[ ! -d $remote_md ]]
1375	then
1376	if mkdir $remote_md
1377	then
1378	printf "\n\n *** directory for make depository:"
1379	printf "\n $remote_md"
1380	printf "\n was created\n"
1381	else
1382	printf "\n +++ directory for make depository:"
1383	printf "\n $remote_md"
1384	printf "\n cannot be created"
1385	locat=local_depository_path; exit
1386	fi
1387	fi
1388
1389	# QUELLTEXT-DATEIEN AUS REPOSITORY INS DEPOSITORY KOPIEREN
1390	echo " "
1391	echo " *** updating sources in $remote_md"
1392	cd $remote_md
1393	cp $local_source_path/${mainprog}_sources.tar .
1394	tar xf ${mainprog}_sources.tar
1395
1396	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF LOKALEM RECHNER AUSFUEHREN
1397	echo " "
1398	echo " *** execute \"make\" on local host"
1399
1400	make $make_options PROG=$mainprog F90=$compiler_name COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options" 2>&1 \| tee ${remote_host}_last_make_protokoll
1401
1402	if [[ $? != 0 ]]
1403	then
1404	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1405	if [[ $silent = false ]]
1406	then
1407	answer=dummy
1408	printf "\n"
1409	while [[ "$answer" != c && "$answer" != k ]]
1410	do
1411	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
1412	read answer
1413	if [[ "$answer" = l ]]
1414	then
1415	more ${remote_host}_last_make_protokoll
1416	fi
1417	done
1418	if [[ $answer = k ]]
1419	then
1420	locat=user_abort; exit
1421	fi
1422	fi
1423	fi
1424
1425
1426	# TAR NEW VERSION ON LOCAL HOST
1427	printf "\n *** tar update on local host ..."
1428	tar -cf ${mainprog}_current_version.tar .$suf .o *.mod
1429
1430
1431	# COMPILE THE UTILITY PROGRAMS
1432	elif [[ $compile_utility_programs = true ]]
1433	then
1434	printf "\n\n"
1435	echo " *** compiling the utility programs ..."
1436	cd ${local_source_path}/../UTIL
1437
1438	# TOUCH FILES IN ORDER TO FORCE COMPILATION FOR EVERY BLOCK
1439	touch *.f90
1440	make $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options"
1441
1442	# CHECK IF QMAKE IS AVAILABLE AND COMPILE MRUNGUI
1443	if [[ $util_compiled_localhost == false ]]
1444	then
1445	printf "\n\n"
1446	echo " *** compiling the mrun GUI"
1447	if which qmake >/dev/null; then
1448	cd mrungui
1449	touch *
1450	qmake
1451	make
1452	make clean
1453	rm Makefile
1454	cd ..
1455	else
1456	echo " +++ no qmake found. The (optional) GUI will not be compiled."
1457	fi
1458
1459	# COMPILE CHECK_NAMELIST_FILES (ONLY FOR ONE BRANCH on LOCALHOST NEEDED)
1460
1461	printf "\n\n"
1462	echo " *** compiling check_namelist_files ..."
1463
1464	# GET CHECK OPTIONS
1465	line=""
1466	found=false
1467	grep "$remote_host_string" $config_file \| grep "%cpp_options" > $tmp_mbuild
1468	while read line1
1469	do
1470
1471	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
1472	then
1473	line="$line1"
1474	fi
1475
1476	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
1477	then
1478	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING UND ALLE -D ENTFERNEN
1479	line="$line "
1480	copts_check=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g' \| sed 's/-D[^ ]* //g' \| sed 's/ -D.*//g'`
1481	found=true
1482	fi
1483
1484	done < $tmp_mbuild
1485	copts_check="$copts_check -D__check -D__parallel"
1486
1487	check_depository_path=${local_source_path}/../UTIL
1488	cd $check_depository_path
1489	mkdir check_tmp
1490	cp ${local_source_path}/${mainprog}_sources_check.tar ./check_tmp
1491	cd check_tmp
1492	tar -xf ${mainprog}_sources_check.tar
1493	rm -rf ${mainprog}_sources_check.tar
1494
1495	make -f Makefile_check $make_options F90=$compiler_name_ser COPT="$copts_check"
1496	tar -cf check_namelist_files.tar Makefile_check check_namelist_files.x .f90 .o *.mod
1497	mv check_namelist_files.tar $check_depository_path
1498	mv check_namelist_files.x $PALM_BIN
1499	cd $check_depository_path
1500	rm -rf check_tmp
1501	util_compiled_localhost=true
1502	else
1503	cd $check_depository_path
1504	printf "\n\n"
1505	echo " *** skipped compilation of mrun GUI."
1506	printf "\n\n"
1507	echo " *** skipped compilation of check_namelist_files."
1508	fi
1509
1510	fi
1511	fi
1512	done
1513
1514
1515	if [[ $host_found = false ]]
1516	then
1517	if [[ $host = all ]]
1518	then
1519	printf "\n +++ no hosts found in configuration file"
1520	else
1521	printf "\n +++ host \"$host\" not found in configuration file"
1522	fi
1523	locat=config_file; exit
1524	fi
1525
1526	if [[ "$block_conditions" != none && $block_conditions_found = false ]]
1527	then
1528	printf "\n +++ block conditions \"$block_conditions\" not found for host \"$host\""
1529	fi
1530
1531
1532	# FINAL WORK
1533	rm -f hosts_found_in_config_file
1534	rm -f ${local_source_path}/${mainprog}_sources_check.tar
1535

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |