#!/bin/ksh
# mbuild - Programmuebersetzungsscript   Version:  @(#)MBUILD 2.0    08/03/07
# $Id: mbuild 54 2007-03-08 00:00:02Z raasch $

     # Prozedur zur Uebersetzung von Programmteilen mittels make-Mechanismus
     # auf einem Remote-Rechner, ausgehend von Quellcode auf einem lokalen
     # Rechner

     # Folgende Probleme existieren unter Linux, wenn keine AT&T-Korn-Shell
     # verwendet wird:
     # Wertzuweisungen an Variablen innerhalb von DO-Schleifen werden nicht
     # nach aussen weitergegeben. "while read line" funktioniert nicht
     # innerhalb einer Pipe.

     # letzte Aenderung:
     # 06/05/02 - Siggi - Beginn der Entwicklung
     # 12/06/02 - Siggi - Abschluss der Entwicklungsarbeiten
     # 23/06/02 - Siggi - voerst kein make-clean, Abbruch bei batch-mode
     # 24/07/02 - Siggi - Keine Verwendung der temporaeren Datei tmp_mbuild
     #                    unter linux mehr noetig, da nun AT&T-Korn-Shell
     #                    benutzt wird
     # 12/09/02 - Siggi - ibmh (hanni.hlrn.de) validiert
     # 19/12/02 - Siggi - ibmb validiert
     # 05/02/03 - Siggi - hostname nobela included
     # 04/03/03 - Siggi - host nech included
     # 06/03/03 - Siggi - make_call_string is echoed without '' to
     #                    file LAST_MAKE_CALL (otherwise error on NEC, because
     #                    '' are part of compiler options
     # 16/03/03 - Siggi - Two underscores are placed in front of every define
     #                    string, in case that palm.f90 version contains
     #                    such strings
     # 16/04/03 - Siggi - First extensions for linux machines
     # 24/06/03 - Siggi - host orkan included
     # 17/07/03 - Siggi - IP adress set to new "cross" machine at DKRZ
     # 24/07/03 - Siggi - host maestro admitted
     # 06/08/03 - Siggi - host gregale admitted
     # 05/11/03 - Siggi - hosts irifi and quanero are now belonging to lcmuk
     # 19/11/03 - Heiko - on lcmuk, mbuild does not tar the *.i files
     # 08/01/04 - Siggi - additional preprocessor directive for ibm included
     #                    (-D$OMP=OMP) in order to avoid problems with
     #                    OMP_NUM_THREADS
     # 09/01/04 - Siggi - action above cancelled
     # 28/01/04 - Siggi - action above re-cancelled
     # 08/03/04 - Siggi - host scirocco admitted
     # 26/03/04 - Siggi - .o and .mod files are also deleted in depository, if
     #                    the respective .f90 file is not listed in the makefile
     #                    and deletion is demanded by the user
     # 12/04/04 - Siggi - scp2 instead of scp used for transfer from decalpha
     #                    due to error in ssh installation (otherwise a prompt
     #                    for the password appears)
     # 23/07/04 - Siggi - changes due to the new berni configuration
     #                    (federation switch)
     # 08/09/04 - Siggi - hanni IP address changed to 130.75.4.10
     # 23/09/04 - Joerg - correction of IP-Address for 'cross' (DKRZ)
     # 09/03/05 - Siggi - on nech, mbuild does not tar the *.i files
     # 31/03/05 - Siggi - mbuild does not tar *.i files any more
     # 24/04/05 - Siggi - netcdf support on lcmuk
     # 25/04/05 - Siggi - netcdf support on gfdl3 (decalpha)
     # 12/05/05 - Siggi - netcdf support on ibm
     #                    set OBJECT_MODE=64 for compiling on ibmb, ibmh
     # 18/05/05 - Siggi - netcdf support on nec
     # 19/05/05 - Siggi - IP addres 134.75.155.74 changed to 165.132.26.56
     # 23/05/05 - Siggi - netcdf support on ibms
     # 01/06/05 - Siggi - reset of cpp_options to "" on lcmuk
     # 30/06/05 - Siggi - netcdf support on bora
     # 20/10/05 - Siggi - update of netcdf-version on decalpha (gfdl3)
     # 04/11/05 - Siggi - netcdf 3.6.0-p1 on ibmh/ibmb
     # 30/12/05 - Siggi - change of IP adresses in subnet 130.75.105
     #                    host gfdl5 (ibmy) admitted
     # 10/01/06 - Siggi - cpp directive for NetCDF 64bit support
     # 20/01/06 - Siggi - cpp directive for ibmy
     # 09/02/06 - Marcus- compile only once on lcmuk (as on ibmh/ibmb)
     # 10/02/06 - Siggi - modifications for scp on decalpha
     # 13/04/06 - Siggi - ostria admitted
     # 19/04/06 - Siggi - preprocessor directive -D$OMP=OMP for ibm removed
     # 23/05/05 - Siggi - lctit (SUN Fire X4600) admitted
     # 29/05/05 - Siggi - atmos (lcide) admitted
     # 23/08/06 - Siggi - netcdf support for scirocco (notebook)
     # 24/11/06 - Siggi - breva and levanto admitted
     # 07/02/07 - Siggi - adapted for RIAM (neck)
     # 10/02/07 - Siggi - all hpmuk-related code removed
     # 02/03/07 - Siggi - compilation of utility programs and transfer of
     #                    scripts to remote hosts added (option -u)



    # VARIABLENVEREINBARUNGEN + DEFAULTWERTE
 compile_utility_programs=false
 config_file=.mrun.config
 host=all
 host_found=false
 ibm_hb_done=false
 lcmuk_done=false
 locat=normal
 makefile=""
 remote_mode=interactive
 scirocco=false
 silent=false
 suf=f90
 update=false

 typeset -i  ih ihost=0

 typeset  -R50 calltime
 typeset  -L20 column1
 typeset  -L50 column2
 typeset  -L70 column3
 typeset  -L20 version="MBUILD  2.0"

    # FEHLERBEHANDLUNG
    # BEI EXIT:
 trap 'if [[ $locat != normal ]]
       then
          printf "\n\n +++ mbuild killed \n\n"
       else
          printf "\n\n *** mbuild finished \n\n"
       fi' exit


    # BEI TERMINAL-BREAK:
 trap 'printf "\n\n +++ mbuild killed by \"^C\" \n\n"
       exit
      ' 2



    # SHELLSCRIPT-OPTIONEN EINLESEN
 while  getopts  :c:h:m:rs:u  option
 do
   case  $option  in
       (c)   config_file=$OPTARG;;
       (h)   host=$OPTARG;;
       (m)   makefile=$OPTARG;;
       (r)   remote_mode=batch;;
       (s)   suf=$OPTARG;;
       (u)   compile_utility_programs=true;;
       (\?)  printf "\n  +++ unknown option $OPTARG \n";
             locat=parameter; exit;;
   esac
 done



    # BATCH-MODE IST ZUR ZEIT NICHT FUNKTIONSFAEHIG
 if [[ $remote_mode = batch ]]
 then
    printf "\n  +++ sorry, batch mode does not work! \n"
    locat=parameter; exit
 fi



    # LOKALEN RECHNER ERMITTELN
 local_host_real_name=$(hostname)
 local_addres=$(nslookup `hostname` 2>&1 | grep "Address:" | tail -1 | awk '{print $2}')
 case  $local_host_real_name  in
     (atmos)                    local_host=lcide;;
     (berte)                    local_host=t3eb;;
     (bora|breva|gregale|irifi|levanto|maestro|orkan|ostria|quanero|scirocco)  local_host=lcmuk;;
     (gate)                     local_host=neck;;
     (gfdl3.yonsei.ac.kr)       local_host=decalpha; local_addres=165.132.26.56;;
     (gfdl5)                    local_host=ibmy; local_addres=165.132.26.58;;
     (gwdk081.gwdg.de)          local_host=ibm;;
     (hreg01a-en0|hreg02a-en0)  local_host=ibmh;;
     (nobel|nobela)             local_host=ibms;;
     (tgg*)                     local_host=lctit;;
     (t3e)                      local_host=t3eh;;
     (zam003)                   local_host=t3ej2;;
     (zam005)                   local_host=t3ej5;;
     (*)       printf "\n  +++ local host \"$local_host_real_name\" not admitted for mbuild \n"
               locat=local_host; exit;;
 esac

 [[ $local_host_real_name = scirocco ]]  &&  scirocco=true



    # PRUEFEN, OB KONFIGURATIONS-DATEI VORHANDEN
 if [[ ! -f $config_file ]]
 then
    printf "\n  +++ configuration file: "
    printf "\n           $config_file"
    printf "\n      does not exist"
    locat=configuration; exit  
 fi
 if [[ $local_host != ibms ]]
 then
    config_file=$PWD/$config_file
 else
    config_file=`pwd`/$config_file
 fi


 
    # BENUTZERNAMEN AUF LOKALEM RECHNER AUS KONFIGURATIONSDATEI ERMITTELN
 line=""
 grep  " $local_host" $config_file | grep "%remote_username"  |  while read line
 do
    if [[ "$line" != ""  ||  $(echo $line | cut -c1) != "#" ]]
    then
       local_username=`echo $line | cut -d" " -s -f2`
    fi
 done

 if [[ "$local_username" = "" ]]
 then
    printf "\n  +++ no user name found in configuration file"
    printf "\n      for local host \"$local_host\" "
    locat=config_file; exit
 fi


    # LOKALEN QUELLTEXTPFAD ERMITTELN.
    # ZUERST PRUEFEN, OB EIN GLOBALER QUELLTEXTPFAD FUER ALLE RECHNER
    # VEREINBART WURDE.
    # DAZU ZUNAECHST ALLE IN DER KONFIGURATIONSDATEI VEREINBARTEN GLOBALEN
    # VARIABLEN SETZEN, WEIL DIESE EVTL. IN PFADNAMEN VERWENDET WERDEN
 line=""
 grep "%" $config_file  |  while read line
 do
    if [[ "$line" != ""  &&  "$(echo $line | cut -d" " -s -f3)" = "" ]]
    then
       var=`echo $line | cut -d" " -s -f1 | cut -c2-`
       value=`echo $line | cut -d" " -s -f2`
       eval export $var=\$value
#       eval echo \"   $var=\$$var \"   # AUSGABE ZU TESTZWECKEN
    fi
 done

    # NUN PRUEFEN, OB EIN GLOBALER QUELLTEXTPFAD VEREINBART WURDE
 line=""
 grep "%source_path" $config_file  |  while read line
 do
    if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
    then
       if [[ "$(echo $line | cut -d" " -s -f3)" = "" ]]
       then
          global_source_path=`echo $line | cut -d" " -s -f2`
       fi
    fi
 done

 line=""
 grep  " $local_host" $config_file | grep "%source_path"  |  while read line
 do
    if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
    then
       local_source_path=`echo $line | cut -d" " -s -f2`
    fi
 done

 if [[ "$local_source_path" = "" ]]
 then
    if [[ "$global_source_path" != "" ]]
    then
       local_source_path=$global_source_path
    else
       printf "\n  +++ no source path found in configuration file"
       printf "\n      for local host \"$local_host\" "
       printf "\n      please set \"\%source_path\" in configuration file"
       locat=config_file; exit
    fi
 fi
 eval local_source_path=$local_source_path
 eval local_source_path=$local_source_path


     # EBENSO PFAD FUER DAS MAKE-DEPOSITORY ERMITTELN
 line=""
 grep "%depository_path" $config_file  |  while read line
 do
    if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
    then
       if [[ "$(echo $line | cut -d" " -s -f3)" = "" ]]
       then
          global_depository_path=`echo $line | cut -d" " -s -f2`
       fi
    fi
 done

 line=""
 grep  " $local_host" $config_file | grep "%depository_path"  |  while read line
 do
    if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
    then
       local_depository_path=`echo $line | cut -d" " -s -f2`
    fi
 done

 if [[ "$local_depository_path" = "" ]]
 then
    if [[ "$global_depository_path" != "" ]]
    then
       local_depository_path=$global_depository_path
    else
       printf "\n  +++ no depository path found in configuration file"
       printf "\n      for local host \"$local_host\" "
       printf "\n      please set \"\%depository_path\" in configuration file"
       locat=config_file; exit
    fi
 fi
 eval local_depository_path=$local_depository_path
 eval local_depository_path=$local_depository_path



    # PRUEFEN, OB IN KONFIGURATIONSDATEI EIN HAUPTPROGRAMM
    # VEREINBART WURDE
 if [[ $(grep -c "%mainprog" $config_file) != 1 ]]
 then
    printf "\n  +++ no main program or more than one main program defined"
    printf "\n      in configuration file"
    locat=configuration; exit
 else
    line=`grep "%mainprog" $config_file`
    if [[ "$line" = ""  ||  $(echo $line | cut -c1) = "#" ]]
    then
       printf "\n  +++ no main program defined in configuration file"
       locat=configuration; exit
    fi
    mainprog=`echo $line | cut -d" " -s -f2 | cut -d"." -f1`
 fi



    # MAKEFILE vorhanden
 [[ "$makefile" = "" ]]  &&  makefile=$local_source_path/Makefile
 if [[ ! -f $makefile ]]
 then
    printf "\n  +++ makefile: "
    printf "\n           $makefile"
    printf "\n      does not exist"
    locat=makefile; exit  
 fi


    # HEADER-AUSGABE (TEIL1: MELDUNGEN UEBER LOKALEN RECHNER)
 calltime=$(date)
 printf "\n"
 printf "#------------------------------------------------------------------------# \n"
 printf "| $version$calltime | \n"
 printf "|                                                                        | \n"
 column1="called on:"; column2=$local_host_real_name
 printf "| $column1$column2 | \n"
 column1="local username:"; column2=$local_username
 printf "| $column1$column2 | \n"
 column1="local IP-addres:"; column2=$local_addres
 printf "| $column1$column2 | \n"
 column1="config file:"; column2=$config_file
 printf "| $column1$column2 | \n"
 column1="makefile:"; column2=$makefile
 printf "| $column1$column2 | \n"
 column1="local source path:"; column2=$local_source_path
 printf "| $column1$column2 | \n"
 column1="make depository:"; column2=$local_depository_path
 printf "| $column1$column2 | \n"
 printf "#------------------------------------------------------------------------# \n"

# printf "|                                                                        | \n"


 if [[ $compile_utility_programs = false ]]
 then

    cd  $local_source_path


       # LISTE DER ZU PRUEFENDEN QUELLTEXTDATEIEN ERSTELLEN
    source_code_files=`ls -1  *.$suf`



       # VERZEICHNIS FUER DAS MAKE-DEPOSITORY ERZEUGEN,
       # FALLS NOCH NICHT VORHANDEN. ANSONSTEN ALLE DATEIEN
       # NEUEREN DATUMS IN DIESES VERZEICHNIS KOPIEREN
    if [[ ! -d $local_depository_path ]]
    then
       if  mkdir $local_depository_path
       then
          printf "\n\n  *** directory for make depository:"
          printf "\n           $local_depository_path"
          printf "\n      was created\n"

             # MAKEFILE UND QUELLTEXTDATEIEN UNTER BEIBEHALTUNG
             # IHRES DATUMS INS VERZEICHNIS KOPIEREN
          printf "\n  *** makefile and source code files are copied to"
          printf "\n      $local_depository_path\n"
          printf "\n      copying makefile \"$makefile\" ..."
          cp -p  $makefile  $local_depository_path/Makefile

             # QUELLTEXTDATEIEN MUESSEN IM MAKEFILE AUFGEFUEHRT
             # SEIN
          for  filename  in  $source_code_files
          do
             if [[ $(grep -c $filename  $makefile) = 0 ]]
             then
                printf "\n  +++ source code file:"
                printf "\n         $filename"
                printf "\n      is not listed in makefile"
                locat=makefile; exit
             else
                printf "\n      copying source code file \"$filename\" ..."
                cp -p  $filename  $local_depository_path
             fi
          done
          printf "\n"
       else
          printf "\n  +++ directory for make depository:"
          printf "\n           $local_depository_path"
          printf "\n      cannot be created"
          locat=local_depository_path; exit
       fi
    else
 
       printf "\n  *** checking file status ..."

          # MAKEFILE KOPIEREN, FALLS NEUEREN DATUMS
       if [[ $makefile -nt $local_depository_path/Makefile ]]
       then
          printf "\n  *** update of \"$makefile\" "
          cp -f -p  $makefile  $local_depository_path/Makefile
          update=true

             # PRUEFEN, OB ALLE DATEIEN IM DEPOSITORY AUCH IM NEUEN MAKEFILE
             # VERZEICHNET SIND UND GEGEBENENFALLS DATEIEN LOESCHEN
          cd  $local_depository_path
          source_code_files_in_depository=`ls -1  *.$suf`
          for  filename  in  $source_code_files_in_depository
          do
             if [[ $(grep -c $filename  Makefile) = 0 ]]
             then
                printf "\n  *** source code file in \"$local_depository_path\":"
                printf "\n         $filename"
                printf "\n      is not listed in makefile"
                if [[ $silent = false ]]
                then
                   answer=dummy
                   printf "\n\n"
                   while [[ "$answer" != y  &&  "$answer" != Y  &&  "$answer" != n  &&  "$answer" != N ]]
                   do
                      printf " >>> delete \"$filename\" in \"$local_depository_path\" (y/n) ?  "
                      read  answer
                   done
                   if [[ $answer = y  ||  $answer = Y ]]
                   then
                      base=`echo $filename | cut -d. -f2`
                      rm -f  $filename
                      rm -f  ${base}.o  ${base}.mod
                      printf "\n  *** \"$filename\" deleted in \"$local_depository_path\" "
                   else 
                      printf "\n  *** \"$filename\" not deleted in \"$local_depository_path\" "
                   fi
                fi
             fi
          done
          cd  -  > /dev/null  2>&1

       elif [[ $local_depository_path/Makefile -nt $makefile ]]
       then
          printf "\n  *** makefile in depository is newer than"
          printf "\n      \"$makefile\" "
          if [[ $silent = false ]]
          then
             answer=dummy
             printf "\n\n"
             while [[ "$answer" != y  &&  "$answer" != Y  &&  "$answer" != n  &&  "$answer" != N ]]
             do
                printf " >>> update \"$makefile\" (y/n) ?  "
                read  answer
             done
             if [[ $answer = y  ||  $answer = Y ]]
             then
                cp -f -p  $local_depository_path/Makefile  $makefile
                printf "\n  *** \"$makefile\" updated"
             else 
                printf "\n  *** \"$makefile\" not updated"
             fi
          fi
       fi

          # QUELLTEXTDATEIEN KOPIEREN, FALLS NEUEREN DATUMS
          # SIE MUESSEN IM MAKEFILE AUFGEFUEHRT SEIN
       for  filename  in  $source_code_files
       do
          if [[ $(grep -c $filename  $makefile) = 0 ]]
          then
             printf "\n  +++ source code file:"
             printf "\n         $filename"
             printf "\n      is not listed in makefile"
             locat=makefile; exit
          else
             if [[ ! -f $local_depository_path/$filename ]]
             then
                cp -p  $filename  $local_depository_path
                printf "\n  *** source code file \"$filename\" created in \"$local_depository_path\" "
             fi
             if [[ $filename -nt $local_depository_path/$filename ]]
             then
                printf "\n  *** update of source code file \"$filename\" "
                cp -f -p  $filename  $local_depository_path
                update=true
             fi
          fi
       done


          # PRUEFEN, OB ALLE DATEIEN IM DEPOSITORY IM AKTUELLEN ARBEITSVERZEICHNIS VORHANDEN
          # ODER EVTL. NEUEREN DATUMS SIND
       cd  $local_depository_path
       source_code_files_in_depository=`ls -1  *.$suf`
       cd  -  > /dev/null  2>&1
       for  filename  in  $source_code_files_in_depository
       do
          if [[ ! -f $filename ]]
          then
             printf "\n  *** source code file \"$filename\" does not exist in current directory"
             if [[ $silent = false ]]
             then
                answer=dummy
                printf "\n\n"
                while [[ "$answer" != y  &&  "$answer" != Y  &&  "$answer" != n  &&  "$answer" != N ]]
                do
                   printf " >>> create \"$filename\" in current directory (y/n) ?  "
                   read  answer
                done
                if [[ $answer = y  ||  $answer = Y ]]
                then
                   cp -p  $local_depository_path/$filename  $filename
                   printf "\n  *** source code file \"$filename\" created in current directory"
                else 
                   printf "\n  *** source code file \"$filename\" not created in current directory"
                fi
             fi
          elif [[ $local_depository_path/$filename -nt $filename ]]
          then
             ls -al $local_depository_path/$filename
             ls -al $filename
             printf "\n  *** source code file \"$filename\" in depository is newer than in current directory"
             if [[ $silent = false ]]
             then
                answer=dummy
                printf "\n\n"
                while [[ "$answer" != y  &&  "$answer" != Y  &&  "$answer" != n  &&  "$answer" != N ]]
                do
                   printf " >>> update \"$filename\" in current directory (y/n) ?  "
                   read  answer
                done
                if [[ $answer = y  ||  $answer = Y ]]
                then
                   cp -f -p  $local_depository_path/$filename  $filename
                   printf "\n  *** source code file \"$filename\" updated in current directory"
                else 
                   printf "\n  *** source code file \"$filename\" not updated in current directory"
                fi
             fi
          fi
       done

       if [[ $update = false ]]
       then
          printf "\n  *** no updates necessary in \"$local_depository_path\" "
          if [[ $silent = false ]]
          then
             answer=dummy
             printf "\n\n"
             while [[ "$answer" != y  &&  "$answer" != Y  &&  "$answer" != n  &&  "$answer" != N ]]
             do
                printf " >>> continue with updates on remote hosts (y/n) ?  "
                read  answer
             done
             if [[ $answer = n  ||  $answer = N ]]
             then
                locat=user_abort; exit
             fi
          fi
       fi
    fi
 

 
       # QUELLTEXTDATEIEN UND MAKEFILE MIT TAR ZUSAMMENBINDEN
       # IN JEDEM FALL ALLEN DATEIEN WRITE-PERMIT GEBEN, DAMIT ES AUF
       # DEN REMOTE-RECHNERN NICHT EVTL. ZU PROBLEMEN BEIM UEBERSCHREIBEN KOMMT
    printf "\n\n  *** tar of makefile and source files in depository ..."  
    cd  $local_depository_path
    chmod u+w  Makefile  *.$suf
    tar -cf  ${mainprog}_sources.tar  Makefile  *.$suf
    printf "\n"

 fi



    # BESTAETIGUNG ZUM WEITERMACHEN EINHOLEN
 if [[ $host = all ]]
 then
    printf "\n  *** updates will be made for ALL hosts found in"
    printf "\n      the configuration file"
 else
    printf "\n  *** update will be made for host \"$host\" "
 fi

 if [[ $silent = false ]]
 then
    answer=dummy
    printf "\n\n"
    while [[ "$answer" != y  &&  "$answer" != Y  &&  "$answer" != n  &&  "$answer" != N ]]
    do
       printf " >>> continue (y/n) ?  "
       read  answer
    done
    if [[ $answer = n  ||  $answer = N ]]
    then
       locat=user_abort; exit
    fi
 fi
 
 

    
    # GENERIERUNG DER AKTUELLEN MODELLVERSION FUER ALLE RECHNER-/UEBERSETZUNGS-
    # VERSIONEN, DIE IN DER KONFIGURATIONSDATEI GEFUNDEN WERDEN
 printf "\n  *** scanning configuration file for host(s) ..."

 grep  %fopts  $config_file  |  while read line
 do
       # KOMMENTARZEILEN UEBERSPRINGEN
    [[ $(echo $line | cut -c1) = "#" ]]  &&  continue
    (( ihost = ihost + 1 ))
    hostline[$ihost]="$line"
 done

 
 while (( ih < ihost ))
 do

    (( ih = ih + 1 ))

       # REMOTE-RECHNER UND UEBERSETZUNGS-VERSION FESTSTELLEN
       # NUR WEITERMACHEN, WENN ENTSPRECHENDER REMOTE-RECHNER MITTELS
       # SHELLSCRIPT-OPTION AUCH AUSGEWAEHLT WURDE
    remote_host_string=`echo ${hostline[$ih]} | cut -d" " -s -f3-`
    remote_host=`echo $remote_host_string | cut -d" " -f1`
    if [[ $host != all ]]
    then
       [[ $remote_host != $host ]]  &&  continue
    fi
    host_found=true
    condition1=`echo $remote_host_string | cut -d" " -s -f2`
    if [[ $condition1 = $remote_host ]]
    then
       condition1=""
    else
       condition2=`echo $remote_host_string | cut -d" " -s -f3`
    fi


       # AUF HLRN-RECHNER NUR EINMAL UEBERSETZEN
    if [[ $remote_host = ibmb  ||  $remote_host = ibmh ]]
    then
       if [[ $ibm_hb_done = true ]]
       then
          printf "\n *** remote host \"$remote_host\" skipped since compilation has already"
          printf "\n     been carried out on one of the HLRN machines\n"
          continue
       fi
    fi

       # AUF LCMUK-RECHNER NUR EINMAL UEBERSETZEN
    if [[ $remote_host = lcmuk ]]
    then
       if [[ $lcmuk_done = true ]]
       then
          printf "\n *** local host \"$remote_host\" skipped since compilation has already"
          printf "\n     been carried out on this host\n"
          continue
       fi
    fi


       # IP-ADRESSE DES REMOTE-RECHNERS BESTIMMEN
    netcdf_support=false
    case  $remote_host  in
        (lcmuk)          remote_addres=130.75.105.3; cpp_options=""
                         netcdf_support=true
                         if [[ $scirocco = true ]]
                         then
                            netcdf_path=/opt/netcdf/3.6.2-beta4
                         else
                            netcdf_path=/muksoft/packages/netcdf/linux
                         fi;;
        (lctit)          remote_addres=172.17.75.161; netcdf_support=true
                         netcdf_path=/home/usr5/mkanda/netcdf-3.6.1/src; cpp_options="-Mpreprocess";;
        (decalpha)       remote_addres=165.132.26.56; cpp_options="-cpp"; netcdf_support=true
                         netcdf_path=/usr/local/netcdf-3.5.1;;
        (ibm)            remote_addres=134.76.99.81; cpp_options="-qsuffix=cpp=f90";;
        (ibmb)           remote_addres=130.73.230.10; cpp_options="-qsuffix=cpp=f90"; netcdf_support=true
                         netcdf_path=/aws/dataformats/netcdf-3.6.0-p1/64-32;;
        (ibmh)           remote_addres=130.75.4.10; cpp_options="-qsuffix=cpp=f90"; netcdf_support=true
                         netcdf_path=/aws/dataformats/netcdf-3.6.0-p1/64-32;;
        (ibms)           remote_addres=150.183.5.101; cpp_options="-qsuffix=cpp=f90"; netcdf_support=true
                         netcdf_path=/applic/lib/NETCDF64;;
        (ibmy)           remote_addres=165.132.26.58; cpp_options="-qsuffix=cpp=f90"; netcdf_support=true
                         netcdf_path=/usr1/users/raasch/pub/netcdf-3.6.0-p1;;
        (nech)           remote_addres=136.172.44.192; cpp_options="-Ep"; netcdf_support=true
                         netcdf_path=/pool/SX-6/netcdf/netcdf-3.6.0-p1;;
        (neck)           remote_addres=133.5.178.11; cpp_options="-Ep"; netcdf_support=true
                         netcdf_path=/home/DSRC/NC/tatuyama/pub/netcdf-3.6.0-p1;;
        (t3eb)           remote_addres=130.73.206.21; cpp_options="-eZ";;
        (t3eh)           remote_addres=130.75.4.131; cpp_options="-eZ";;
        (t3ej2)          remote_addres=134.94.100.22; cpp_options="-eZ";;
        (t3ej5)          remote_addres=134.94.100.49; cpp_options="-eZ";;
        (ground.yonsei.ac.kr) remote_addres=134.75.155.33;;
     (*)                 printf "\n  +++ remote host \"$remote_host\" unknown";
                         printf "\n      please inform S. Raasch!";
                         locat=config_file; exit;;
    esac


       # REMOTE-USERNAMEN ERMITTELN
    line=""
    grep  "$remote_host_string" $config_file | grep "%remote_username"  |  while read line1
    do
       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
       then
          line="$line1"
       fi
    done

    if [[ "$line" = ""  ||  $(echo $line | cut -c1) = "#" ]]
    then
       printf "\n  +++ no remote username found in configuration file"
       printf "\n      for \"$remote_host_string\" "
       locat=config_file; exit
    else
       remote_username=`echo $line | cut -d" " -s -f2`
    fi


       # REMOTE-QUELLTEXTPFAD ERMITTELN
    line=""
    remote_source_path=""
    grep  "$remote_host_string" $config_file | grep "%source_path"  |  while read line1
    do
       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
       then
          line="$line1"
       fi
    done

    if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
    then
       remote_source_path=`echo $line | cut -d" " -s -f2`
    fi
    if [[ "$remote_source_path" = "" ]]
    then
       if [[ "$global_source_path" != "" ]]
       then
          remote_source_path=$global_source_path
       else
          printf "\n  +++ no source path found in configuration file"
          printf "\n      for \"$remote_host_string\" "
          locat=config_file; exit
       fi
    fi

    remote_ud=${remote_source_path}/../UTIL
    remote_ud=$(eval echo $remote_ud)


       # REMOTE-PFAD FUER MAKE-DEPOSITORY ERMITTELN
    remote_md=""
    line=""
    grep  "$remote_host_string" $config_file | grep "%depository_path"  |  while read line1
    do
       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
       then
          line="$line1"
       fi
    done

    if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
    then
       remote_md=`echo $line | cut -d" " -s -f2`
    fi
    if [[ "$remote_md" = "" ]]
    then
       if [[ "$global_depository_path" != "" ]]
       then
          remote_md=$global_depository_path
       else
          printf "\n  +++ no depository path found in configuration file"
          printf "\n      for \"$remote_host_string\" "
          printf "\n      please set \"\%depository_path\" in configuration file"
          locat=config_file; exit
       fi
    fi

    remote_md=$(eval echo $remote_md)


       # COMPILERNAMEN ERMITTELN
    line=""
    grep  "$remote_host_string" $config_file | grep "%compiler_name "  |  while read line1
    do
       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
       then
          line="$line1"
       fi
    done

    if [[ "$line" = ""  ||  $(echo $line | cut -c1) = "#" ]]
    then
       printf "\n  +++ no compiler name found in configuration file"
       printf "\n      for \"$remote_host_string\" "
       locat=config_file; exit
    else
       compiler_name=`echo $line | cut -d" " -s -f2`
    fi


       # BEI BENUTZUNG EINES PARALLELEN COMPILERS MUSS AUCH EIN
       # SERIELLER COMPILERNAME ERMITTELT WERDEN
    if [[ $(echo $remote_host_string | grep -c parallel) = 1 ]]
    then
       line=""
       grep  "$remote_host_string" $config_file | grep "%compiler_name_ser"  |  while read line1
       do
          if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
          then
             line="$line1"
          fi
       done

       if [[ "$line" = ""  ||  $(echo $line | cut -c1) = "#" ]]
       then
          printf "\n  +++ no serial compiler name found in configuration file"
          printf "\n      for \"$remote_host_string\" "
          locat=config_file; exit
       else
          compiler_name_ser=`echo $line | cut -d" " -s -f2`
       fi
    else
       compiler_name_ser=$compiler_name
    fi



       # PRAEPROZESSOR-DIREKTIVEN SETZEN
    if [[ $(echo $remote_host | cut -c1-3) = ibm ]]
    then
       if [[ $remote_host = ibms ]]
       then
          cpp_options="$cpp_options -WF,-DMPI_REAL=MPI_DOUBLE_PRECISION"
          [[ $netcdf_support = true ]]  &&  cpp_options="${cpp_options},-D__netcdf"
       else
          cpp_options="$cpp_options -WF,-DMPI_REAL=MPI_DOUBLE_PRECISION"
          [[ $netcdf_support = true ]]  &&  cpp_options="${cpp_options},-D__netcdf,-D__netcdf_64bit"
          [[ $remote_host = ibmy ]]  &&  cpp_options="${cpp_options},-D__ibmy_special"
       fi
    elif [[ $remote_host = lcmuk ]]
    then
       cpp_options="$cpp_options -DMPI_REAL=MPI_DOUBLE_PRECISION -DMPI_2REAL=MPI_2DOUBLE_PRECISION"
       [[ $netcdf_support = true ]]  &&  cpp_options="$cpp_options -D__netcdf -D__netcdf_64bit"
    elif [[ $remote_host = lctit ]]
    then
       cpp_options="$cpp_options -DMPI_REAL=MPI_DOUBLE_PRECISION -DMPI_2REAL=MPI_2DOUBLE_PRECISION"
       [[ $netcdf_support = true ]]  &&  cpp_options="$cpp_options -D__netcdf"
    elif [[ $remote_host = decalpha ]]
    then
       cpp_options="$cpp_options -DMPI_REAL=MPI_DOUBLE_PRECISION -DMPI_2REAL=MPI_2DOUBLE_PRECISION"
       [[ $netcdf_support = true ]]  &&  cpp_options="$cpp_options -D__netcdf"
    elif [[ $remote_host = nech  ||  $remote_host = neck ]]
    then
       cpp_options="$cpp_options -DMPI_REAL=MPI_REAL8 -DMPI_2REAL=MPI_2REAL8 -DSCFFT=DZFFT -DCSFFT=ZDFFT"
       [[ $netcdf_support = true ]]  &&  cpp_options="$cpp_options -D__netcdf -D__netcdf_64bit"
    fi

    if [[ $(echo $remote_host | cut -c1-3) = ibm ]]
    then
       for  string  in  $remote_host_string
       do
          if [[ $(echo $string | cut -c1-3) = ibm ]]
          then
             cpp_options="${cpp_options},-D__ibm"
             if [[ $remote_host = ibmy ]]
             then
                cpp_options="${cpp_options},-D__ibmy_special"
             fi
          else
             cpp_options="${cpp_options},-D__$string"
          fi
       done
       cpp_options="$cpp_options "
    elif [[ $remote_host = nech  ||  $remote_host = neck ]]
    then
       for  string  in  $remote_host_string
       do
          if [[ $(echo $string | cut -c1-3) = nec ]]
          then
             cpp_options="${cpp_options} -D__nec"
          else
             cpp_options="${cpp_options} -D__$string"
          fi
       done
       cpp_options="$cpp_options "
    else
       for  string  in  $remote_host_string
       do
          cpp_options="$cpp_options -D__$string "
       done
    fi


       # COMPILEROPTIONEN ERMITTELN
    line=""
    grep  "$remote_host_string" $config_file | grep "%fopts"  |  while read line1
    do
       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
       then
          line="$line1"
       fi
    done
    if [[ "$line" = ""  ||  $(echo $line | cut -c1) = "#" ]]
    then
       printf "\n  +++ no compiler options found in configuration file"
       printf "\n      for \"$remote_host_string\" "
       locat=config_file; exit
    else
          # EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
       compiler_options=`echo $line | cut -d" " -s -f2 | sed 's/::/%DUM%/g' | sed 's/:/ /g' | sed 's/%DUM%/:/g'`
    fi
    if [[ $netcdf_support = true ]]
    then
       case  $remote_host  in
          (decalpha)  compiler_options="-I${netcdf_path}/include  $compiler_options";;
          (ibmb|ibmh) compiler_options="-I ${netcdf_path}/include-64  $compiler_options";;
          (ibms)      compiler_options="-I /applic/netcdf64/src/f90  $compiler_options";;
          (ibmy)      compiler_options="-I ${netcdf_path}/include  $compiler_options";;
          (lcmuk)     compiler_options="-I ${netcdf_path}/include  $compiler_options";;
          (lctit)     compiler_options="-I ${netcdf_path}/f90      $compiler_options";;
          (nech|neck) compiler_options="-I ${netcdf_path}/include  $compiler_options";;
       esac
    fi



       # LADER-OPTIONEN ERMITTELN
    line=""
    grep  "$remote_host_string" $config_file | grep "%lopts"  |  while read line1
    do
       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
       then
          line="$line1"
       fi
    done

    if [[ "$line" = ""  ||  $(echo $line | cut -c1) = "#" ]]
    then
       printf "\n  +++ no loader options found in configuration file"
       printf "\n      for \"$remote_host_string\" "
       locat=config_file; exit
    else
          # EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
       loader_options=`echo $line | cut -d" " -s -f2 | sed 's/::/%DUM%/g' | sed 's/:/ /g' | sed 's/%DUM%/:/g'`
    fi
    if [[ $netcdf_support = true ]]
    then
       case  $remote_host  in
          (decalpha)                   loader_options="$loader_options -L${netcdf_path}/lib -lnetcdf";;
          (ibmb|ibmh|lcmuk|nech|neck)  loader_options="$loader_options -L${netcdf_path}/lib -lnetcdf";;
          (ibms)                       loader_options="$loader_options -L${netcdf_path} -lnetcdf";;
          (ibmy)                       loader_options="$loader_options -L${netcdf_path}/lib -lnetcdf";;
          (lctit)                      loader_options="$loader_options -L${netcdf_path}/libsrc -lnetcdf";;
       esac
    fi


    printf "\n\n#------------------------------------------------------------------------# \n"
    if [[ $remote_host = $local_host ]]
    then
       column1="remote_host:"; column2="$remote_host (= local host!)"
    else
       column1="remote_host:"; column2=$remote_host
    fi
    printf "| $column1$column2 | \n"
    printf "|                                                                        | \n"
    column1="conditions:"; column2="$condition1 $condition2"
    printf "| $column1$column2 | \n"
    column1="make depository:"; column2=$remote_md
    printf "| $column1$column2 | \n"
    if [[ $compile_utility_programs = true ]]
    then
       column1="utility directory:"; column2=$remote_ud
       printf "| $column1$column2 | \n"
    fi
    column1="username:"; column2=$remote_username
    printf "| $column1$column2 | \n"
    column1="addres:"; column2=$remote_addres
    printf "| $column1$column2 | \n"
    column1="compiler:"; column2=$compiler_name
    printf "| $column1$column2 | \n"
    if [[ $compile_utility_programs = true ]]
    then
       column1="serial compiler:"; column2=$compiler_name_ser
       printf "| $column1$column2 | \n"
    fi
    column1="cpp options:"; column2=$cpp_options
    printf "| $column1$column2 | \n"
    line=$(echo "$cpp_options" | cut -c51-)
    while [[ "$line" != "" ]]
    do
       column1=""
       column2=$line
       printf "| $column1$column2 | \n"
       line=$(echo "$line" | cut -c51-)
    done
    column1="compiler options:"; column2=$compiler_options
    printf "| $column1$column2 | \n"
    line=$(echo "$compiler_options" | cut -c51-)
    while [[ "$line" != "" ]]
    do
       column1=""
       column2=$line
       printf "| $column1$column2 | \n"
       line=$(echo "$line" | cut -c51-)
    done
    column1="loader options:"; column2=$loader_options
    printf "| $column1$column2 | \n"
    line=$(echo "$loader_options" | cut -c51-)
    while [[ "$line" != "" ]]
    do
       column1=""
       column2=$line
       printf "| $column1$column2 | \n"
       line=$(echo "$line" | cut -c51-)
    done
    printf "#------------------------------------------------------------------------# \n"

    if [[ $silent = false ]]
    then
       answer=dummy
       printf "\n\n"
       while [[ "$answer" != y  &&  "$answer" != Y  && "$answer" != c  &&  "$answer" != C  && "$answer" != s  &&  "$answer" != S  &&  "$answer" != a  &&  "$answer" != A ]]
       do
          printf " >>> continue (y(es)/c(ontinue)/a(bort)/s(skip)) ?  "
          read  answer
       done
       if [[ $answer = a  ||  $answer = A ]]
       then
          locat=user_abort; exit
       fi
       if [[ $answer = c  ||  $answer = C ]]
       then
          silent=false
       fi
       if [[ $answer = s  ||  $answer = S ]]
       then
          continue
       fi
    fi


    if [[ $remote_mode = batch ]]
    then

          # BATCH-JOB PARAMETER SETZEN
       case  $remote_host  in
           (t3eb)           queue=berte; memory=60; cputime=1000; xoption="-X 0";;
           (t3eh)           queue=comp_t3e; memory=60; cputime=360;;
           (t3ej2)          queue=normal; memory=60; cputime=1000; xoption="-X 0";;
           (t3ej5|ground.yonsei.ac.kr)  printf "\n  --- remote host \"$remote_host\" does not allow batch jobs"; continue;;
       esac


          # BATCH-JOB ZUSAMMENSTELLEN
       printf "\n  *** creating batch-job for remote host"
       echo " "  >  mbuild_job

          # AUF CRAY-RECHNERN IN JUELICH WIRD KEIN BENUTZER-PROFILE AUSGEFUEHRT
          # DIES WIRD HIER GETAN, UM PFADE USW. ZU SETZEN
       if [[ $remote_host = t3ej2 ]]
       then
          echo "set +vx"                       >>  mbuild_job
          echo ". .profile"                    >>  mbuild_job
          echo "set -x"                        >>  mbuild_job
       fi

          # AUF CRAY-RECHNERN GELADENE MODULE AUFLISTEN
       if [[ $host = t3eb  || $host = t3eh  ||  $host = t3ej2 ]]
       then
          echo "module list"                   >>  mbuild_job
       fi


          # WECHSEL IN TEMPORAERES VERZEICHNIS
       echo "cd ${remote_md}"  >>  mbuild_job


          # AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
       echo  "scp  ${local_username}@${local_addres}:~/modell/code_3dp/palm_current_version/${mainprog}_sources.tar  ${mainprog}_sources.tar"  >>  mbuild_job
#       echo  "[[ \$? != 0 ]]  &&  (echo "+++ scp failed"; exit)"  >>  mbuild_job


          # FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
       echo  "[[ -f ${mainprog}_current_version.tar ]]  &&  tar -xvf  ${mainprog}_current_version.tar"  >>  mbuild_job


          # AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
       echo  "tar -xvf  ${mainprog}_sources.tar"              >>  mbuild_job


          # MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
       echo  "make  PROG=$mainprog  F90=$compiler_name  COPT=\"$cpp_options\"  F90FLAGS=\"$compiler_options\"  LDFLAGS=\"$loader_options\" "  >>  mbuild_job
       echo  "chmod  u+w  *"                                  >>  mbuild_job

          # NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
       echo  "tar -cvf  ${mainprog}_current_version.tar  *.f90  *.o"  >>  mbuild_job


          # AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
       echo  "make  clean"                                    >>  mbuild_job
       echo  "rm ${mainprog}_sources.tar"                     >>  mbuild_job
       echo  "rm *.f90 Makefile"                              >>  mbuild_job



          # JOB MITTELS SUBJOB STARTEN
       printf "\n  *** sending batch job to remote host"
#       subjob  $xoption  -h $remote_host  -q $queue  -m $memory  -t $cputime  -v  mbuild_job


          # JOBFILE LOESCHEN
#       rm  aljob

    else

       if [[ $remote_host != $local_host ]]
       then

          if [[ $compile_utility_programs = false ]]
          then

                # AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
                # FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
             echo "  *** copying \"${mainprog}_sources.tar\" to \"${remote_addres}:${remote_md}/\" "
             if [[ $remote_host != lctit ]]
             then
                ssh  ${remote_username}@${remote_addres} "[[ ! -d ${remote_md} ]]  &&  (echo \"  *** ${remote_md} will be created\"; mkdir -p  ${remote_md})"
             else
                   # TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
                   # MIT SSH, DESHALB AUFRUF PER PIPE
                print "[[ ! -d ${remote_md} ]]  &&  (echo \"  *** ${remote_md} will be created\"; mkdir -p  ${remote_md})"  |  ssh ${remote_username}@${remote_addres}  2>&1
             fi
             if [[ $local_host = decalpha ]]
             then
                   # DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTÄNDIGEN PFADES
                   # IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
                   # KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
                remote_md=`echo $remote_md | sed 's/\$HOME\///'`
                /bin/scp  ${mainprog}_sources.tar  ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
             else
                scp  ${mainprog}_sources.tar  ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
             fi



                # FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
             echo "  *** untar previous update on remote host, if existing"
             if [[ $remote_host != lctit ]]
             then
                ssh  ${remote_username}@${remote_addres}  "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]]  &&  tar -xf  ${mainprog}_current_version.tar"
             else
                   # TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
                   # MIT SSH, DESHALB AUFRUF PER PIPE
                print  "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]]  &&  tar -xf  ${mainprog}_current_version.tar"  |  ssh  ${remote_username}@${remote_addres}  2>&1
             fi


                # AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
             echo "  *** untar actual sources on remote host"
             if [[ $remote_host != lctit ]]
             then
                ssh  ${remote_username}@${remote_addres}  "cd ${remote_md}; tar -xf  ${mainprog}_sources.tar"
             else
                   # TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
                   # MIT SSH, DESHALB AUFRUF PER PIPE
                print  "cd ${remote_md}; tar -xf  ${mainprog}_sources.tar"  |  ssh  ${remote_username}@${remote_addres}  2>&1
             fi


                # MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
                # KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
                # BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
                # Z.B. DIE PFADE ZUM COMPILER)
             echo "  *** execute \"make\" on remote host"

             if [[ $remote_host = nech ]]
             then
                make_call_string="sxmake  PROG=$mainprog  F90=$compiler_name  COPT=\"$cpp_options\"  F90FLAGS=\"$compiler_options\"  LDFLAGS=\"$loader_options\" "
             else
                make_call_string="make  PROG=$mainprog  F90=$compiler_name  COPT=\"$cpp_options\"  F90FLAGS=\"$compiler_options\"  LDFLAGS=\"$loader_options\" "
             fi

             if [[ $remote_host = t3eh ]]
             then
       
                print "xterm\nexit\n cd ${remote_md}; make  PROG=$mainprog  F90=$compiler_name  COPT=\"$cpp_options\"  F90FLAGS=\"$compiler_options\"  LDFLAGS=\"$loader_options\" " | ssh  ${remote_username}@${remote_addres} 2>&1 | tee ${remote_host}_last_make_protokoll

             elif [[ $remote_host = t3ej2  ||  $remote_host = ibms  ||  $remote_host = ibmy ]]
             then

                ssh  ${remote_username}@${remote_addres}  "cd ${remote_md}; echo '$make_call_string' > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 | tee ${remote_host}_last_make_protokoll

             elif [[ $remote_host = ibmb  ||  $remote_host = ibmh ]]
             then

                print "export OBJECT_MODE=64; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" | ssh  ${remote_username}@${remote_addres} 2>&1 | tee ${remote_host}_last_make_protokoll

             elif [[ $remote_host = lctit ]]
             then

                echo  " "  >  ${remote_host}_last_make_protokoll
                while [[ $(cat ${remote_host}_last_make_protokoll | grep -c "Forwarding to N1GE") = 0 ]]
                do
                   print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" | ssh  ${remote_username}@${remote_addres} 2>&1 | tee ${remote_host}_last_make_protokoll
                done

             else

                print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" | ssh  ${remote_username}@${remote_addres} 2>&1 | tee ${remote_host}_last_make_protokoll

             fi

             if [[ $(grep -c MAKE_ERROR ${remote_host}_last_make_protokoll) != 0 ]]
             then
                printf "\a\n  +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
                if [[ $silent = false ]]
                then
                   answer=dummy
                   printf "\n"
                   while [[ "$answer" != c  &&  "$answer" != k ]]
                   do
                      printf "  >>> continue / list errors / kill mbuild (c/l/k) ? "
                      read  answer
                      if [[ "$answer" = l ]]
                      then
                         more ${remote_host}_last_make_protokoll
                      fi
                   done
                   if [[ $answer = k ]]
                   then
                      locat=user_abort; exit
                   fi
                fi
             fi



                # NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
             printf "\n  *** tar update on remote host ..."
             if [[ $remote_host != lctit ]]
             then
                ssh  ${remote_username}@${remote_addres}  "cd ${remote_md}; chmod u+w *; tar -cf  ${mainprog}_current_version.tar  *.f90 *.o *.mod"
             else
                   # TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
                   # MIT SSH, DESHALB AUFRUF PER PIPE
                print  "cd ${remote_md}; chmod u+w *; tar -cf  ${mainprog}_current_version.tar  *.f90 *.o *.mod"  |  ssh  ${remote_username}@${remote_addres}  2>&1
             fi


                # AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
#             printf "\n  *** \"make clean\" on remote host ..."
#             ssh  ${remote_username}@${remote_addres}  "cd ${remote_md}; make clean; rm ${mainprog}_sources.tar; rm *.f90 Makefile"
#             printf "\n"




             # GLEICHE AKTIONEN FUER DIE UTILITY-PROGRAMME DURCHFUEHREN
             # AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
             # FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
          elif [[ $compile_utility_programs = true ]]
          then

             printf "\n\n"
             echo "  *** copying scripts and utility programs to \"${remote_addres}:${remote_ud}/\" "
             cd  ${local_source_path}/../SCRIPTS

             if [[ $remote_host != lctit ]]
             then
                ssh  ${remote_username}@${remote_addres} "[[ ! -d ${remote_ud} ]]  &&  (echo \"  *** ${remote_ud} will be created\"; mkdir -p  ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]]  &&  (echo \"  *** ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)"
             else
                   # TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
                   # MIT SSH, DESHALB AUFRUF PER PIPE
                print "[[ ! -d ${remote_ud} ]]  &&  (echo \"  *** ${remote_ud} will be created\"; mkdir -p  ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]]  &&  (echo \"  *** ${remote_ud}/../SCRIPTS will be created\"; mkdir -p  ${remote_ud}/../SCRIPTS)"  |  ssh ${remote_username}@${remote_addres}  2>&1
             fi

                # KOPIEREN DER SCRIPTE
             if [[ $local_host = decalpha ]]
             then
                   # DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTÄNDIGEN PFADES
                   # IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
                   # KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
                remote_ud=`echo $remote_ud | sed 's/\$HOME\///'`
                /bin/scp  batch_scp mbuild mrun subjob  ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS  >  /dev/null
             else
                scp  batch_scp mbuild mrun subjob  ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS  >  /dev/null
             fi

             cd  -  > /dev/null
             cd  ${local_source_path}/../UTIL


                # KOPIEREN DER UTILITY-PROGRAMME
             if [[ $local_host = decalpha ]]
             then
                   # DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTÄNDIGEN PFADES
                   # IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
                   # KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
                remote_ud=`echo $remote_ud | sed 's/\$HOME\///'`
                /bin/scp  Makefile  *.f90  ${remote_username}@${remote_addres}:${remote_ud}  >  /dev/null
             else
                scp  Makefile  *.f90  ${remote_username}@${remote_addres}:${remote_ud}  >  /dev/null
             fi



                # MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
                # KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
                # BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
                # Z.B. DIE PFADE ZUM COMPILER)
             echo "  *** execute \"make\" on remote host"

             if [[ $remote_host = nech ]]
             then
                make_call_string="sxmake  F90=$compiler_name  F90_SER=$compiler_name_ser  COPT=\"$cpp_options\"  F90FLAGS=\"$compiler_options\"  LDFLAGS=\"$loader_options\" "
             else
                make_call_string="make  F90=$compiler_name  F90_SER=$compiler_name_ser  COPT=\"$cpp_options\"  F90FLAGS=\"$compiler_options\"  LDFLAGS=\"$loader_options\" "
             fi

             if [[ $remote_host = ibms  ||  $remote_host = ibmy ]]
             then

                ssh  ${remote_username}@${remote_addres}  "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR"

             elif [[ $remote_host = ibmb  ||  $remote_host = ibmh ]]
             then

                print "export OBJECT_MODE=64; cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" | ssh  ${remote_username}@${remote_addres}

             elif [[ $remote_host = lctit ]]
             then

                echo  " "  >  ${remote_host}_last_make_protokoll
                while [[ $(cat ${remote_host}_last_make_protokoll | grep -c "Forwarding to N1GE") = 0 ]]
                do
                   print "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" | ssh  ${remote_username}@${remote_addres} 2>&1 | tee ${remote_host}_last_make_protokoll
                done

             else

                print "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" | ssh  ${remote_username}@${remote_addres} 2>&1 | tee ${remote_host}_last_make_protokoll

             fi

          fi    # ENDE UEBERSETZUNG DER UTILITY-PROGRAMME


             # NUR AUF EINEM HLRN-RECHNER UEBERSETZEN
          [[ $remote_host = ibmb  ||  $remote_host = ibmh ]]  &&  ibm_hb_done=true

       else

          if [[ $compile_utility_programs = false ]]
          then

                # MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF LOKALEM RECHNER AUSFUEHREN
             echo " "
             echo "  *** execute \"make\" on local host"

             make  PROG=$mainprog  F90=$compiler_name  COPT="$cpp_options"  F90FLAGS="$compiler_options"  LDFLAGS="$loader_options"  2>&1 | tee ${remote_host}_last_make_protokoll

             if [[ $? != 0 ]]
             then
                printf "\a\n  +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
                if [[ $silent = false ]]
                then
                   answer=dummy
                   printf "\n"
                   while [[ "$answer" != c  &&  "$answer" != k ]]
                   do
                      printf "  >>> continue / list errors / kill mbuild (c/l/k) ? "
                      read  answer
                      if [[ "$answer" = l ]]
                      then
                         more ${remote_host}_last_make_protokoll
                      fi
                   done
                   if [[ $answer = k ]]
                   then
                      locat=user_abort; exit
                   fi
                fi
             fi


                # NEUE VERSION AUF LOKALEM RECHNER ZUSAMMENPACKEN
             printf "\n  *** tar update on local host ..."
             tar -cf  ${mainprog}_current_version.tar  *.$suf *.o *.mod


             # COMPILE THE UTILITY PROGRAMS
          elif [[ $compile_utility_programs = true ]]
          then
             printf "\n\n"
             echo "  *** compiling the utility programs ..."
             cd ${local_source_path}/../UTIL
             make  F90=$compiler_name  F90_SER=$compiler_name_ser  COPT="$cpp_options"  F90FLAGS="$compiler_options"  LDFLAGS="$loader_options"
             cd  -  > /dev/null
          fi


             # NUR EINMAL AUF LCMUK UEBERSETZEN
          [[ $remote_host = lcmuk ]]  &&  lcmuk_done=true

       fi

    fi
 done


 if [[ $host_found = false ]]
 then
    if [[ $host = all ]]
    then
       printf "\n  +++ no hosts found in configuration file"
    else
       printf "\n  +++ host \"$host\" not found in configuration file"
    fi
    locat=config_file; exit
 fi



    # ABSCHLIESSENDE ARBEITEN
 rm -f  hosts_found_in_config_file