Home

Context Navigation

source: palm/trunk/SCRIPTS/mbuild @ 976

Last change on this file since 976 was 936, checked in by raasch, 12 years ago
new option -K for mbuild
Property svn:keywords set to `Id Rev`
File size: 54.2 KB

Line
1	#!/bin/ksh
2	# mbuild - script for compiling the PALM code and its utility programs
3	# $Id: mbuild 936 2012-06-25 13:15:54Z maronga $
4
5	# Procedure to compile code on local and remote hosts using the
6	# make-mechanism. The source code must be provided on the local host.
7
8	# Last changes:
9	# 06/05/02 - Siggi - start development
10	# 12/06/02 - Siggi - first version finished
11	# 12/09/02 - Siggi - ibmh (hanni.hlrn.de) included
12	# 19/12/02 - Siggi - ibmb included
13	# 05/02/03 - Siggi - hostname nobela included
14	# 04/03/03 - Siggi - host nech included
15	# 06/03/03 - Siggi - make_call_string is echoed without '' to
16	# file LAST_MAKE_CALL (otherwise error on NEC, because
17	# '' are part of compiler options
18	# 16/03/03 - Siggi - Two underscores are placed in front of every define
19	# string, in case that palm.f90 version contains
20	# such strings
21	# 16/04/03 - Siggi - First extensions for linux machines
22	# 24/06/03 - Siggi - host orkan included
23	# 17/07/03 - Siggi - IP adress set to new "cross" machine at DKRZ
24	# 24/07/03 - Siggi - host maestro admitted
25	# 06/08/03 - Siggi - host gregale admitted
26	# 05/11/03 - Siggi - hosts irifi and quanero are now belonging to lcmuk
27	# 19/11/03 - Heiko - on lcmuk, mbuild does not tar the *.i files
28	# 08/01/04 - Siggi - additional preprocessor directive for ibm included
29	# (-D$OMP=OMP) in order to avoid problems with
30	# OMP_NUM_THREADS
31	# 09/01/04 - Siggi - action above cancelled
32	# 28/01/04 - Siggi - action above re-cancelled
33	# 08/03/04 - Siggi - host scirocco admitted
34	# 26/03/04 - Siggi - .o and .mod files are also deleted in depository, if
35	# the respective .f90 file is not listed in the makefile
36	# and deletion is demanded by the user
37	# 12/04/04 - Siggi - scp2 instead of scp used for transfer from decalpha
38	# due to error in ssh installation (otherwise a prompt
39	# for the password appears)
40	# 23/07/04 - Siggi - changes due to the new berni configuration
41	# (federation switch)
42	# 08/09/04 - Siggi - hanni IP address changed to 130.75.4.10
43	# 23/09/04 - Joerg - correction of IP-Address for 'cross' (DKRZ)
44	# 09/03/05 - Siggi - on nech, mbuild does not tar the *.i files
45	# 31/03/05 - Siggi - mbuild does not tar *.i files any more
46	# 24/04/05 - Siggi - netcdf support on lcmuk
47	# 25/04/05 - Siggi - netcdf support on gfdl3 (decalpha)
48	# 12/05/05 - Siggi - netcdf support on ibm
49	# set OBJECT_MODE=64 for compiling on ibmb, ibmh
50	# 18/05/05 - Siggi - netcdf support on nec
51	# 19/05/05 - Siggi - IP addres 134.75.155.74 changed to 165.132.26.56
52	# 23/05/05 - Siggi - netcdf support on ibms
53	# 01/06/05 - Siggi - reset of cpp_options to "" on lcmuk
54	# 30/06/05 - Siggi - netcdf support on bora
55	# 20/10/05 - Siggi - update of netcdf-version on decalpha (gfdl3)
56	# 04/11/05 - Siggi - netcdf 3.6.0-p1 on ibmh/ibmb
57	# 30/12/05 - Siggi - change of IP adresses in subnet 130.75.105
58	# host gfdl5 (ibmy) admitted
59	# 10/01/06 - Siggi - cpp directive for NetCDF 64bit support
60	# 20/01/06 - Siggi - cpp directive for ibmy
61	# 09/02/06 - Marcus- compile only once on lcmuk (as on ibmh/ibmb)
62	# 10/02/06 - Siggi - modifications for scp on decalpha
63	# 13/04/06 - Siggi - ostria admitted
64	# 19/04/06 - Siggi - preprocessor directive -D$OMP=OMP for ibm removed
65	# 23/05/05 - Siggi - lctit (SUN Fire X4600) admitted
66	# 29/05/05 - Siggi - atmos (lcide) admitted
67	# 23/08/06 - Siggi - netcdf support for scirocco (notebook)
68	# 24/11/06 - Siggi - breva and levanto admitted
69	# 07/02/07 - Siggi - adapted for RIAM (neck)
70	# 10/02/07 - Siggi - all hpmuk-related code removed
71	# 02/03/07 - Siggi - compilation of utility programs and transfer of
72	# scripts to remote hosts added (option -u)
73	# 14/03/07 - Siggi - fimm admitted, revision number added to terminal
74	# output
75	# 16/03/07 - Siggi - adjustments (netcdf) for lctit
76	# adjustments for running under pdksh, local ip-addres
77	# is not determined any more
78	# 30/03/07 - Siggi - cpp-directives/options + netcdf-options are read
79	# from configuration file
80	# host identifier (local_host) is read from config file
81	# 10/10/07 - Siggi - bugfix: handling of comment lines
82	# 18/07/08 - Siggi - adapted for lcsgih
83	# 21/07/08 - Siggi - mainprog (executable) is added to the tar-file
84	# ({mainprog}_current_version)
85	# 02/10/08 - Siggi - adapted for lcxt4
86	# 14/11/08 - Siggi - update mechanism completely revised: source tarfile
87	# remains in source directory, one depository per block
88	# (given in the config-file) is created, allways all
89	# files from the source directory are copied to the
90	# respective depository, no additional file checks are
91	# done any more (version 2.1)
92	# 13/01/09 - Marcus- re-enable compilation more than once on lcmuk (as on
93	# other machines)
94	# 21/03/09 - Siggi - -u copies also copies process_dvr_output and
95	# .dvrserver.config
96	# 21/04/09 - Siggi - adjustments for new IBM at DKRZ, which is now ibmh
97	# 25/08/09 - BjornM- adapted for lck
98	# 01/12/09 - BjornM- re-adjustments for lcxt4
99	# 01/02/10 - Siggi - adjustments for lcxt5m
100	# 03/02/10 - Siggi - make options (mopts) to be set by configuration file
101	# implemented, remoted mode option -r completely
102	# removed, t3e related parts removed
103	# 26/02/10 - BjornM- re-adjustments for lcxt4 (new modules)
104	# 01/03/10 - Siggi - mpilib replaced by modules: explicit module settings
105	# removed; modules should now be given in the
106	# configuration file
107	# 02/03/10 - Siggi - utility programs are created separately for each
108	# block in the configuration file,
109	# parallel make for utility programs
110	# 12/03/10 - Siggi - bugfix: remode_md was given a wrong value
111	# 16/08/10 - BjornM- bugfix: call of modules on local host, new workaround
112	# for lcxt4
113	# 07/09/10 - Siggi - bugfix for wrong netcdf/3.6.3 module on lcsgi
114	# 08/12/10 - Siggi - initialization of the module command changed for
115	# SGI-ICE/lcsgi
116	# adjustments for Kyushu Univ. (lcrte, ibmku)
117	# 14/12/10 - Siggi - adjustments for new Tsubame system at Tokyo
118	# institute of technology (lctit)
119	# 04/03/11 - BjornM- re-adjustments for lcxt4
120	# 06/03/11 - Siggi - adjustments for ibmkisti
121	# 03/04/11 - Micha - added lckordi
122	# 17/08/11 - Siggi - HLRN access via hicegate0 (130.75.4.101)
123	# 27/11/11 - Siggi - Bugfix for make options setting (-j)
124	# 12/12/11 - BjornM- added mrun GUI to ulitity programs
125	# 25/01/12 - BjornM- compilation of check_namelist_files (namelist file
126	# check program) has been added to the utility branch),
127	# modfified the compilation of mrungui
128	# 31/01/12 - BjornM- bugfix for compilation of utility programs on
129	# multiple localhost branches
130	# 08/03/12 - BjornM- bugfix: cpp directive for namelist check program
131	# corrected
132	# 02/05/12 - Bjoern- lcxt4 is now lcxe6, adjustments for lcxe6,
133	# bugfixes for the parameter file check, initial
134	# commands on ssh calls sourced out to .mrun.config
135	# 05/06/12 - Bjoern- bugfixes for execution of login_init_cmd
136	# 18/06/12 - Siggi - option -v (silent mode) added
137	# 25/06/12 - Siggi - option -K (block conditions) added
138
139
140	# VARIABLE DECLARATIONS + DEFAULT VALUES
141	block_conditions=none
142	block_conditions_found=false
143	compile_utility_programs=false
144	config_file=.mrun.config
145	fimm=false
146	host=all
147	host_found=false
148	locat=normal
149	makefile=""
150	module_calls=""
151	util_compiled_localhost=false
152	scirocco=false
153	silent=false
154	suf=f90
155	update=false
156	working_directory=`pwd`
157
158	typeset -i ih ihost=0
159
160	typeset -R30 calltime
161	typeset -L20 column1
162	typeset -L50 column2
163	typeset -L70 column3
164	typeset -L40 version="MBUILD 2.1 Rev$Rev: 936 $"
165
166	# ERROR HANDLING
167	# IN CASE OF EXIT:
168	trap 'rm -rf $working_directory/tmp_mbuild
169	if [[ $locat != normal ]]
170	then
171	printf "\n\n +++ mbuild killed \n\n"
172	else
173	printf "\n\n *** mbuild finished \n\n"
174	fi' exit
175
176
177	# IN CASE OF TERMINAL-BREAK:
178	trap 'rm -rf $working_directory/tmp_mbuild
179	printf "\n\n +++ mbuild killed by \"^C\" \n\n"
180	exit
181	' 2
182
183
184	tmp_mbuild=${working_directory}/tmp_mbuild
185
186	# READ SHELLSCRIPT-OPTIONS
187	while getopts :c:h:K:m:s:uv option
188	do
189	case $option in
190	(c) config_file=$OPTARG;;
191	(h) host=$OPTARG;;
192	(K) block_conditions=$OPTARG;;
193	(m) makefile=$OPTARG;;
194	(s) suf=$OPTARG;;
195	(u) compile_utility_programs=true;;
196	(v) silent=true;;
197	(\?) printf "\n +++ unknown option $OPTARG \n";
198	locat=parameter; exit;;
199	esac
200	done
201
202
203
204	# CHECK, IF CONFIGURATION-FILE EXISTS
205	if [[ ! -f $config_file ]]
206	then
207	printf "\n +++ configuration file: "
208	printf "\n $config_file"
209	printf "\n does not exist"
210	locat=configuration; exit
211	fi
212
213
214
215	# DETERMINE THE LOCAL HOST
216	local_host_real_name=$(hostname)
217	# local_addres=$(nslookup `hostname` 2>&1 \| grep "Address:" \| tail -1 \| awk '{print $2}')
218
219
220
221	# DETERMINE HOST-IDENTIFIER (local_host) FROM THE CONFIG-FILE
222	line=""
223	grep "%host_identifier" $config_file > $tmp_mbuild
224	while read line
225	do
226	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
227	then
228	HOSTNAME=`echo $line \| cut -d" " -s -f2`
229	host_identifier=`echo $line \| cut -d" " -s -f3`
230	if [[ $local_host_real_name = $HOSTNAME ]]
231	then
232	local_host=$host_identifier
233	break
234	fi
235	fi
236	done < $tmp_mbuild
237
238	if [[ "$local_host" = "" ]]
239	then
240	printf "\n +++ no host identifier found in configuration file \"$config_file\""
241	printf "\n for local host \"$local_host_real_name\"."
242	printf "\n Please add line"
243	printf "\n \"\%host_identifier $local_host_real_name <identifier>\""
244	printf "\n to the configuration file."
245	locat=local_host; exit
246	fi
247
248
249
250	[[ $local_host_real_name = scirocco ]] && scirocco=true
251	[[ $local_host_real_name = fimm.bccs.uib.no ]] && fimm=true
252
253
254
255	if [[ $local_host != ibms ]]
256	then
257	config_file=$PWD/$config_file
258	else
259	config_file=`pwd`/$config_file
260	fi
261
262
263	# determine the block conditions
264	if [[ $block_conditions != none ]]
265	then
266	block_condition1=`echo $block_conditions \| cut -d" " -f1`
267	block_condition2=`echo $block_conditions \| cut -d" " -f2`
268	if [[ "$block_condition2" = "$block_condition1" ]]
269	then
270	block_condition2=""
271	fi
272	echo "*** block conditions = 1:\"$block_condition1\" 2:\"$block_condition2\""
273	fi
274
275
276	# DETERMINE USER NAME ON LOCAL HOST FROM THE CONFIG-FILE
277	line=""
278	grep " $local_host" $config_file \| grep "%remote_username" > $tmp_mbuild
279	while read line
280	do
281	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
282	then
283	local_username=`echo $line \| cut -d" " -s -f2`
284	fi
285	done < $tmp_mbuild
286
287
288	if [[ "$local_username" = "" ]]
289	then
290	printf "\n +++ no user name found in configuration file"
291	printf "\n for local host \"$local_host\" "
292	locat=config_file; exit
293	fi
294
295
296	# DETERMINE LOCAL SOURCE-CODE PATH.
297	# FIRST CHECK, IF A GLOBAL SOURCE-CODE PATH HAS BEEN DECLARED FOR ALL HOSTS.
298	# THEREFORE, FIRST SET ALL GLOBAL VARIABLES DECLARED IN THE CONFIG-FILE,
299	# BECAUSE THEY MAY BE USED AS PART OF THE PATH NAME.
300	line=""
301	grep "%" $config_file > $tmp_mbuild
302	while read line
303	do
304	if [[ "$line" != "" && "$(echo $line \| cut -d" " -s -f3)" = "" && $(echo $line \| cut -c1) != "#" ]]
305	then
306	var=`echo $line \| cut -d" " -s -f1 \| cut -c2-`
307	value=`echo $line \| cut -d" " -s -f2`
308	eval export $var=\$value
309	fi
310	done < $tmp_mbuild
311
312	# NOW CHECK, IF A GLOBAL SOURCE-CODE-PATH HAS BEEN DECLARED
313	line=""
314	grep "%source_path" $config_file > $tmp_mbuild
315	while read line
316	do
317	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
318	then
319	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
320	then
321	global_source_path=`echo $line \| cut -d" " -s -f2`
322	fi
323	fi
324	done < $tmp_mbuild
325
326	line=""
327	grep " $local_host" $config_file \| grep "%source_path" > $tmp_mbuild
328	while read line
329	do
330	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
331	then
332	local_source_path=`echo $line \| cut -d" " -s -f2`
333	fi
334	done < $tmp_mbuild
335
336	if [[ "$local_source_path" = "" ]]
337	then
338	if [[ "$global_source_path" != "" ]]
339	then
340	local_source_path=$global_source_path
341	else
342	printf "\n +++ no source path found in configuration file"
343	printf "\n for local host \"$local_host\" "
344	printf "\n please set \"\%source_path\" in configuration file"
345	locat=config_file; exit
346	fi
347	fi
348	eval local_source_path=$local_source_path
349	eval local_source_path=$local_source_path
350
351
352
353	# DETERMINE GLOBAL DEPOSITORY-PATH
354	line=""
355	grep "%depository_path" $config_file > $tmp_mbuild
356	while read line
357	do
358	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
359	then
360	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
361	then
362	global_depository_path=`echo $line \| cut -d" " -s -f2`
363	fi
364	fi
365	done < $tmp_mbuild
366
367	if [[ $found = false ]]
368	then
369	printf "\n +++ no \%depository_path found in"
370	printf "\n $config_file"
371	locat=depository_path; exit
372	fi
373
374	# CHECK, IF A MAIN PROGRAM HAS BEEN DEFINED IN THE CONFIG-FILE
375	if [[ $(grep -c "%mainprog" $config_file) != 1 ]]
376	then
377	printf "\n +++ no main program or more than one main program defined"
378	printf "\n in configuration file"
379	locat=configuration; exit
380	else
381	line=`grep "%mainprog" $config_file`
382	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
383	then
384	printf "\n +++ no main program defined in configuration file"
385	locat=configuration; exit
386	fi
387	mainprog=`echo $line \| cut -d" " -s -f2 \| cut -d"." -f1`
388	fi
389
390
391
392	# CHECK IF MAKEFILE EXITS
393	[[ "$makefile" = "" ]] && makefile=$local_source_path/Makefile
394	if [[ ! -f $makefile ]]
395	then
396	printf "\n +++ makefile: "
397	printf "\n $makefile"
398	printf "\n does not exist"
399	locat=makefile; exit
400	fi
401
402
403	# HEADER-OUTPUT (PART1: MESSAGES CONCERNING THE LOCAL HOST)
404	calltime=$(date)
405	printf "\n"
406	printf "#------------------------------------------------------------------------# \n"
407	printf "\| $version$calltime \| \n"
408	printf "\| \| \n"
409	column1="called on:"; column2=$local_host_real_name
410	printf "\| $column1$column2 \| \n"
411	column1="local username:"; column2=$local_username
412	printf "\| $column1$column2 \| \n"
413	column1="local IP-addres:"; column2=$local_addres
414	printf "\| $column1$column2 \| \n"
415	column1="config file:"; column2=$config_file
416	printf "\| $column1$column2 \| \n"
417	column1="makefile:"; column2=$makefile
418	printf "\| $column1$column2 \| \n"
419	column1="local source path:"; column2=$local_source_path
420	printf "\| $column1$column2 \| \n"
421	printf "#------------------------------------------------------------------------# \n"
422
423	# printf "\| \| \n"
424
425
426	if [[ $compile_utility_programs = false ]]
427	then
428
429	# IN ANY CASE, GIVE ALL FILES WRITE-PERMIT, IN ORDER TO AVOID PROBLEMS
430	# WITH OVERWRITING FILES ON THE REMOTE HOST
431	cd $local_source_path
432	printf "\n\n *** tar of makefile and source files in $local_source_path"
433	tar -cf ${mainprog}_sources.tar Makefile *.$suf
434	printf "\n"
435
436	else
437	cd $local_source_path
438	printf "\n\n *** tar of makefile and source files in $local_source_path"
439
440	cat Makefile_check\|while read line
441	do
442	line=$(echo $line\|grep RCS)
443	if [[ $line == "RCS" ]]
444	then
445	line=$(echo $line\|sed 's/RCS = //g')
446	break
447	fi
448	done
449
450	tar -cf ${mainprog}_sources_check.tar Makefile_check $line
451	printf "\n"
452	fi
453
454
455
456	# GET CONFIRMATION TO CONTINUE
457	if [[ $host = all ]]
458	then
459	printf "\n *** updates will be made for ALL hosts found in"
460	printf "\n the configuration file"
461	else
462	printf "\n *** update will be made for host \"$host\" "
463	fi
464
465	if [[ $silent = false ]]
466	then
467	answer=dummy
468	printf "\n\n"
469	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
470	do
471	printf " >>> continue (y/n) ? "
472	read answer
473	done
474	if [[ $answer = n \|\| $answer = N ]]
475	then
476	locat=user_abort; exit
477	fi
478	fi
479
480
481
482
483	# GENERIERUNG DER AKTUELLEN MODELLVERSION FUER ALLE RECHNER-/UEBERSETZUNGS-
484	# VERSIONEN, DIE IN DER KONFIGURATIONSDATEI GEFUNDEN WERDEN
485	printf "\n *** scanning configuration file for host(s) ..."
486
487	grep %fopts $config_file > $tmp_mbuild
488	while read line
489	do
490	# KOMMENTARZEILEN UEBERSPRINGEN
491	[[ $(echo $line \| cut -c1) = "#" ]] && continue
492	(( ihost = ihost + 1 ))
493	hostline[$ihost]="$line"
494	done < $tmp_mbuild
495
496
497	while (( ih < ihost ))
498	do
499
500	(( ih = ih + 1 ))
501
502	# determine remote host and conditions for the respective block
503	# continue, only if this host has been chosen via -h option and if
504	# conditions have been chosen via -K option
505	remote_host_string=`echo ${hostline[$ih]} \| cut -d" " -s -f3-`
506	remote_host=`echo $remote_host_string \| cut -d" " -f1`
507	if [[ $host != all ]]
508	then
509	[[ $remote_host != $host ]] && continue
510	fi
511	host_found=true
512	condition1=`echo $remote_host_string \| cut -d" " -s -f2`
513	if [[ $condition1 = $remote_host ]]
514	then
515	condition1=""
516	else
517	condition2=`echo $remote_host_string \| cut -d" " -s -f3`
518	fi
519
520	if [[ $block_conditions != none ]]
521	then
522	if [[ "$condition1" != "$block_condition1" \|\| "$condition2" != "$block_condition2" ]]
523	then
524	continue
525	fi
526	block_conditions_found=true
527	fi
528
529	modules=""
530	netcdf_inc=""
531	netcdf_lib=""
532	make_options=""
533
534	# IP-ADRESSE DES REMOTE-RECHNERS BESTIMMEN
535	case $remote_host in
536	(lckordi) remote_adress=210.219.61.8;;
537	(lcmuk) remote_addres=130.75.105.2;;
538	(lcrte) remote_addres=133.5.185.60;;
539	(lcsgib) remote_addres=130.73.232.102;;
540	(lcsgih) remote_addres=130.75.4.101;;
541	(lck) remote_addres=165.132.26.61;;
542	(lctit) remote_addres=10.1.6.170;;
543	(lcxe6) remote_addres=129.177.20.113;;
544	(lcxt5m) remote_addres=193.166.211.144;;
545	(decalpha) remote_addres=165.132.26.56;;
546	(ibmh) remote_addres=136.172.40.15;;
547	(ibmkisti) remote_addres=150.183.146.24;;
548	(ibmku) remote_addres=133.5.4.129;;
549	(ibms) remote_addres=150.183.5.101;;
550	(ibmy) remote_addres=165.132.26.58;;
551	(nech) remote_addres=136.172.44.192;;
552	(neck) remote_addres=133.5.178.11;;
553	(ground.yonsei.ac.kr) remote_addres=134.75.155.33;;
554	(*) if [[ $local_host != $remote_host ]]
555	then
556	printf "\n +++ remote host \"$remote_host\" unknown";
557	printf "\n please inform PALM group support!"
558	fi;;
559	esac
560
561
562	# REMOTE-USERNAMEN ERMITTELN
563	line=""
564	found=false
565	grep "$remote_host_string" $config_file \| grep "%remote_username" > $tmp_mbuild
566	while read line1
567	do
568
569	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
570	then
571	line="$line1"
572	fi
573
574	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
575	then
576	remote_username=`echo $line \| cut -d" " -s -f2`
577	found=true
578	fi
579
580	done < $tmp_mbuild
581
582	if [[ $found = false ]]
583	then
584	printf "\n +++ no remote username found in configuration file"
585	printf "\n for \"$remote_host_string\" "
586	locat=config_file; exit
587	fi
588
589
590	# REMOTE-QUELLTEXTPFAD ERMITTELN
591	line=""
592	remote_source_path=""
593	grep "$remote_host_string" $config_file \| grep "%source_path" > $tmp_mbuild
594	while read line1
595	do
596
597	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
598	then
599	line="$line1"
600	fi
601
602	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
603	then
604	remote_source_path=`echo $line \| cut -d" " -s -f2`
605	fi
606
607	done < $tmp_mbuild
608
609	if [[ "$remote_source_path" = "" ]]
610	then
611	if [[ "$global_source_path" != "" ]]
612	then
613	remote_source_path=$global_source_path
614	else
615	printf "\n +++ no source path found in configuration file"
616	printf "\n for \"$remote_host_string\" "
617	locat=config_file; exit
618	fi
619	fi
620
621	remote_ud=${remote_source_path}/../UTIL
622	remote_ud=$(eval echo $remote_ud)
623
624
625	# REMOTE-PFAD FUER MAKE-DEPOSITORY ERMITTELN
626	remote_md=""
627	line=""
628	grep "$remote_host_string" $config_file \| grep "%depository_path" > $tmp_mbuild
629	while read line1
630	do
631
632	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
633	then
634	line="$line1"
635	fi
636
637	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
638	then
639	remote_md=`echo $line \| cut -d" " -s -f2`
640	fi
641
642	done < $tmp_mbuild
643
644	if [[ "$remote_md" = "" ]]
645	then
646	if [[ "$global_depository_path" != "" ]]
647	then
648	remote_md=$global_depository_path
649	else
650	printf "\n +++ no depository path found in configuration file"
651	printf "\n for \"$remote_host_string\" "
652	printf "\n please set \"\%depository_path\" in configuration file"
653	locat=config_file; exit
654	fi
655	fi
656
657	remote_md=$(eval echo $remote_md)
658	block=""
659	[[ "$condition1" != "" ]] && block=_$condition1
660	[[ "$condition2" != "" ]] && block=${block}_$condition2
661	remote_md=${remote_md}$block
662
663
664	# COMPILERNAMEN ERMITTELN
665	line=""
666	found=false
667	grep "$remote_host_string" $config_file \| grep "%compiler_name " > $tmp_mbuild
668	while read line1
669	do
670
671	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
672	then
673	line="$line1"
674	fi
675
676	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
677	then
678	compiler_name=`echo $line \| cut -d" " -s -f2`
679	found=true
680	fi
681
682	done < $tmp_mbuild
683
684	if [[ $found = false ]]
685	then
686	printf "\n +++ no compiler name found in configuration file"
687	printf "\n for \"$remote_host_string\" "
688	locat=config_file; exit
689	fi
690
691
692	# BEI BENUTZUNG EINES PARALLELEN COMPILERS MUSS AUCH EIN
693	# SERIELLER COMPILERNAME ERMITTELT WERDEN
694	if [[ $(echo $remote_host_string \| grep -c parallel) = 1 ]]
695	then
696	line=""
697	found=false
698	grep "$remote_host_string" $config_file \| grep "%compiler_name_ser" > $tmp_mbuild
699	while read line1
700	do
701
702	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
703	then
704	line="$line1"
705	fi
706
707	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
708	then
709	compiler_name_ser=`echo $line \| cut -d" " -s -f2`
710	found=true
711	fi
712
713	done < $tmp_mbuild
714
715	if [[ $found = false ]]
716	then
717	printf "\n +++ no serial compiler name found in configuration file"
718	printf "\n for \"$remote_host_string\" "
719	locat=config_file; exit
720	fi
721	else
722	compiler_name_ser=$compiler_name
723	fi
724
725
726
727	# PRAEPROZESSOR-OPTIONEN/DIREKTIVEN ERMITTELN
728	line=""
729	found=false
730	grep "$remote_host_string" $config_file \| grep "%cpp_options" > $tmp_mbuild
731	while read line1
732	do
733
734	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
735	then
736	line="$line1"
737	fi
738
739	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
740	then
741	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
742	cpp_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
743	found=true
744	fi
745
746	done < $tmp_mbuild
747
748	if [[ $found = false ]]
749	then
750	printf "\n +++ no preprocessor options found in configuration file"
751	printf "\n for \"$remote_host_string\" "
752	locat=config_file; exit
753	fi
754
755
756	# RECHNERSPEZIFISCHE CPP-DIREKTIVEN HINZUFUEGEN
757	for string in $remote_host_string
758	do
759	if [[ $(echo $remote_host \| cut -c1-2) = lc && $(echo $string \| cut -c1-2) = lc ]]
760	then
761	cpp_options="$cpp_options -D__lc "
762	elif [[ $(echo $remote_host \| cut -c1-3) = ibm && $(echo $string \| cut -c1-3) = ibm ]]
763	then
764	cpp_options="${cpp_options},-D__ibm"
765	elif [[ $(echo $remote_host \| cut -c1-3) = nec && $(echo $string \| cut -c1-3) = nec ]]
766	then
767	cpp_options="${cpp_options} -D__nec"
768	else
769	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
770	then
771	cpp_options="${cpp_options},-D__$string"
772	else
773	cpp_options="$cpp_options -D__$string "
774	fi
775	fi
776	done
777
778
779
780	# NETCDF-OPTIONEN ERMITTELN
781	line=""
782	grep "$remote_host_string" $config_file \| grep "%netcdf_inc" > $tmp_mbuild
783	while read line1
784	do
785
786	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
787	then
788	line="$line1"
789	fi
790
791	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
792	then
793	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
794	netcdf_inc=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
795	fi
796
797	done < $tmp_mbuild
798
799	line=""
800	grep "$remote_host_string" $config_file \| grep "%netcdf_lib" > $tmp_mbuild
801	while read line1
802	do
803
804	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
805	then
806	line="$line1"
807	fi
808
809	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
810	then
811	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
812	netcdf_lib=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
813	fi
814
815	done < $tmp_mbuild
816
817
818
819	# get make options
820	line=""
821	found=false
822	grep "$remote_host_string" $config_file \| grep "%mopts" > $tmp_mbuild
823	while read line1
824	do
825
826	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
827	then
828	line="$line1"
829	fi
830
831	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
832	then
833	# remove colons from directive string
834	make_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
835
836	fi
837
838	done < $tmp_mbuild
839
840
841
842	# COMPILEROPTIONEN ERMITTELN
843	line=""
844	found=false
845	grep "$remote_host_string" $config_file \| grep "%fopts" > $tmp_mbuild
846	while read line1
847	do
848
849	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
850	then
851	line="$line1"
852	fi
853
854	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
855	then
856	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
857	compiler_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
858	found=true
859
860	# NETCDF-INCLUDEVERZEICHNIS HINZUFUEGEN
861	compiler_options="$compiler_options $netcdf_inc"
862	fi
863
864	done < $tmp_mbuild
865
866	if [[ $found = false ]]
867	then
868	printf "\n +++ no compiler options found in configuration file"
869	printf "\n for \"$remote_host_string\" "
870	locat=config_file; exit
871	fi
872
873
874	# get login init commands, "::" is replacing a space
875	line=""
876	grep "$remote_host_string" $config_file \| grep "%login_init_cmd" > $tmp_mbuild
877	while read line1
878	do
879
880	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
881	then
882	line="$line1"
883	fi
884
885	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
886	then
887	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
888	init_cmds=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
889	fi
890	init_cmds="${init_cmds};"
891	done < $tmp_mbuild
892
893
894	# get modules to be loaded
895	line=""
896	grep "$remote_host_string" $config_file \| grep "%modules" > $tmp_mbuild
897	while read line1
898	do
899
900	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
901	then
902	line="$line1"
903	fi
904
905	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
906	then
907	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
908	modules=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
909	fi
910
911	done < $tmp_mbuild
912
913
914	# LADER-OPTIONEN ERMITTELN
915	line=""
916	found=false
917	grep "$remote_host_string" $config_file \| grep "%lopts" > $tmp_mbuild
918	while read line1
919	do
920
921	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
922	then
923	line="$line1"
924	fi
925
926	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
927	then
928	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
929	loader_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
930	found=true
931
932	# NETCDF-LIBRARY HINZUFUEGEN
933	loader_options="$loader_options $netcdf_lib"
934	fi
935
936	done < $tmp_mbuild
937
938	if [[ $found = false ]]
939	then
940	printf "\n +++ no loader options found in configuration file"
941	printf "\n for \"$remote_host_string\" "
942	locat=config_file; exit
943	fi
944
945
946	printf "\n\n#------------------------------------------------------------------------# \n"
947	if [[ $remote_host = $local_host ]]
948	then
949	column1="remote_host:"; column2="$remote_host (= local host!)"
950	else
951	column1="remote_host:"; column2=$remote_host
952	fi
953	printf "\| $column1$column2 \| \n"
954	printf "\| \| \n"
955	column1="conditions:"; column2="$condition1 $condition2"
956	printf "\| $column1$column2 \| \n"
957	column1="make depository:"; column2=$remote_md
958	printf "\| $column1$column2 \| \n"
959	line=$(echo "$remote_md" \| cut -c51-)
960	while [[ "$line" != "" ]]
961	do
962	column1=""
963	column2=$line
964	printf "\| $column1$column2 \| \n"
965	line=$(echo "$line" \| cut -c51-)
966	done
967	if [[ $compile_utility_programs = true ]]
968	then
969	column1="utility directory:"; column2=$remote_ud
970	printf "\| $column1$column2 \| \n"
971	fi
972	column1="username:"; column2=$remote_username
973	printf "\| $column1$column2 \| \n"
974	column1="addres:"; column2=$remote_addres
975	printf "\| $column1$column2 \| \n"
976	column1="compiler:"; column2=$compiler_name
977	printf "\| $column1$column2 \| \n"
978	if [[ $compile_utility_programs = true ]]
979	then
980	column1="serial compiler:"; column2=$compiler_name_ser
981	printf "\| $column1$column2 \| \n"
982	fi
983	if [[ "$make_options" != "" ]]
984	then
985	column1="make options:"; column2=$make_options
986	printf "\| $column1$column2 \| \n"
987	fi
988	column1="cpp options:"; column2=$cpp_options
989	printf "\| $column1$column2 \| \n"
990	line=$(echo "$cpp_options" \| cut -c51-)
991	while [[ "$line" != "" ]]
992	do
993	column1=""
994	column2=$line
995	printf "\| $column1$column2 \| \n"
996	line=$(echo "$line" \| cut -c51-)
997	done
998	column1="compiler options:"; column2=$compiler_options
999	printf "\| $column1$column2 \| \n"
1000	line=$(echo "$compiler_options" \| cut -c51-)
1001	while [[ "$line" != "" ]]
1002	do
1003	column1=""
1004	column2=$line
1005	printf "\| $column1$column2 \| \n"
1006	line=$(echo "$line" \| cut -c51-)
1007	done
1008	column1="loader options:"; column2=$loader_options
1009	printf "\| $column1$column2 \| \n"
1010	line=$(echo "$loader_options" \| cut -c51-)
1011	while [[ "$line" != "" ]]
1012	do
1013	column1=""
1014	column2=$line
1015	printf "\| $column1$column2 \| \n"
1016	line=$(echo "$line" \| cut -c51-)
1017	done
1018	if [[ $modules != "" ]]
1019	then
1020	column1="modules to be load:"; column2=$modules
1021	printf "\| $column1$column2 \| \n"
1022	line=$(echo "$modules" \| cut -c51-)
1023	while [[ "$line" != "" ]]
1024	do
1025	column1=""
1026	column2=$line
1027	printf "\| $column1$column2 \| \n"
1028	line=$(echo "$line" \| cut -c51-)
1029	done
1030	fi
1031	printf "#------------------------------------------------------------------------# \n"
1032
1033	if [[ $silent = false ]]
1034	then
1035	answer=dummy
1036	printf "\n\n"
1037	while [[ "$answer" != y && "$answer" != Y && "$answer" != c && "$answer" != C && "$answer" != s && "$answer" != S && "$answer" != a && "$answer" != A ]]
1038	do
1039	printf " >>> continue (y(es)/c(ontinue)/a(bort)/s(skip)) ? "
1040	read answer
1041	done
1042	if [[ $answer = a \|\| $answer = A ]]
1043	then
1044	locat=user_abort; exit
1045	fi
1046	if [[ $answer = c \|\| $answer = C ]]
1047	then
1048	silent=true
1049	fi
1050	if [[ $answer = s \|\| $answer = S ]]
1051	then
1052	continue
1053	fi
1054	fi
1055
1056
1057	# make on remote host
1058	if [[ $remote_host != $local_host ]]
1059	then
1060	if [[ $compile_utility_programs = false ]]
1061	then
1062
1063	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1064	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
1065	echo " *** copying \"${mainprog}_sources.tar\" to \"${remote_addres}:${remote_md}/\" "
1066	if [[ $remote_host != lctit ]]
1067	then
1068	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})"
1069	else
1070	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1071	# MIT SSH, DESHALB AUFRUF PER PIPE
1072	print "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})" \| ssh ${remote_username}@${remote_addres} 2>&1
1073	fi
1074	if [[ $local_host = decalpha ]]
1075	then
1076	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
1077	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1078	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1079	remote_md=`echo $remote_md \| sed 's/\$HOME\///'`
1080	/bin/scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
1081	else
1082	scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
1083	fi
1084
1085
1086
1087	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
1088	echo " *** untar previous update on remote host, if existing"
1089	if [[ $remote_host != lctit ]]
1090	then
1091	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar"
1092	else
1093	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1094	# MIT SSH, DESHALB AUFRUF PER PIPE
1095	print "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
1096	fi
1097
1098
1099	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
1100	echo " *** untar actual sources on remote host"
1101	if [[ $remote_host != lctit ]]
1102	then
1103	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; tar -xf ${mainprog}_sources.tar"
1104	else
1105	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1106	# MIT SSH, DESHALB AUFRUF PER PIPE
1107	print "cd ${remote_md}; tar -xf ${mainprog}_sources.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
1108	fi
1109
1110
1111	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1112	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
1113	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
1114	# Z.B. DIE PFADE ZUM COMPILER)
1115	echo " *** execute \"make\" on remote host"
1116
1117
1118	# generate make call with make options
1119	if [[ $remote_host = nech ]]
1120	then
1121	make_call_string="sxmake $make_options PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1122	else
1123	make_call_string="make $make_options PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1124	fi
1125
1126	# generate command to load modules, if modules are given
1127	if [[ "$modules" != "" ]]
1128	then
1129	if [[ $remote_host = lctit ]]
1130	then
1131	module_calls=". $modules"
1132	else
1133	module_calls="module load ${modules};"
1134	fi
1135
1136	# bugfix for wrong netcdf module
1137	if [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
1138	then
1139	if [[ $(echo $module_calls \| grep -c netcdf/3.6.3-intel) != 0 ]]
1140	then
1141	module_calls="$module_calls export LD_LIBRARY_PATH=/sw/dataformats/netcdf/3.6.3-intel/lib:\$LD_LIBRARY_PATH;"
1142	fi
1143	fi
1144	else
1145	module_calls=""
1146	fi
1147
1148	if [[ $remote_host = ibmkisti \|\| $remote_host = ibms \|\| $remote_host = ibmy ]]
1149	then
1150
1151	ssh ${remote_username}@${remote_addres} "$init_cmds $module_calls cd ${remote_md}; echo '$make_call_string' > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
1152
1153	elif [[ $remote_host = ibmh ]]
1154	then
1155
1156	print "$init_cmds $module_calls export OBJECT_MODE=64; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1157
1158	elif [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
1159	then
1160	# print ". /usr/share/modules/init/bash; $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1161	print "$init_cmds $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1162
1163	elif [[ $remote_host = lctit ]]
1164	then
1165
1166	echo " " > ${remote_host}_last_make_protokoll
1167	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
1168	do
1169	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1170	done
1171
1172	elif [[ $remote_host = lcxe6 ]]
1173	then
1174
1175	ssh ${remote_username}@${remote_addres} "$init_cmds $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
1176
1177	else
1178
1179	print "$init_cmds $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1180
1181	fi
1182
1183	if [[ $(grep -c MAKE_ERROR ${remote_host}_last_make_protokoll) != 0 ]]
1184	then
1185	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1186	if [[ $silent = false ]]
1187	then
1188	answer=dummy
1189	printf "\n"
1190	while [[ "$answer" != c && "$answer" != k ]]
1191	do
1192	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
1193	read answer
1194	if [[ "$answer" = l ]]
1195	then
1196	more ${remote_host}_last_make_protokoll
1197	fi
1198	done
1199	if [[ $answer = k ]]
1200	then
1201	locat=user_abort; exit
1202	fi
1203	fi
1204	fi
1205
1206
1207
1208	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
1209	printf "\n *** tar update on remote host ..."
1210	if [[ $remote_host != lctit ]]
1211	then
1212	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod"
1213	else
1214	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1215	# MIT SSH, DESHALB AUFRUF PER PIPE
1216	print "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod" \| ssh ${remote_username}@${remote_addres} 2>&1
1217	fi
1218
1219
1220	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
1221	# printf "\n *** \"make clean\" on remote host ..."
1222	# ssh ${remote_username}@${remote_addres} "cd ${remote_md}; make clean; rm ${mainprog}_sources.tar; rm *.f90 Makefile"
1223	# printf "\n"
1224
1225
1226
1227
1228	# GLEICHE AKTIONEN FUER DIE UTILITY-PROGRAMME DURCHFUEHREN
1229	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1230	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
1231	elif [[ $compile_utility_programs = true ]]
1232	then
1233
1234	printf "\n\n"
1235	echo " *** copying scripts and utility programs to \"${remote_addres}:${remote_ud}/\" "
1236	cd ${local_source_path}/../SCRIPTS
1237
1238	if [[ $remote_host != lctit ]]
1239	then
1240	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)"
1241	else
1242	# TIT ERLAUBT NUR DIE AUSFUEHRUNG GANZ BESTIMMTER KOMMANDOS
1243	# MIT SSH, DESHALB AUFRUF PER PIPE
1244	print "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)" \| ssh ${remote_username}@${remote_addres} 2>&1
1245	fi
1246
1247	# KOPIEREN DER SCRIPTE
1248	if [[ $local_host = decalpha ]]
1249	then
1250	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTAENDIGEN PFADES
1251	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1252	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1253	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
1254	/bin/scp batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
1255	else
1256	scp batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
1257	fi
1258
1259	cd - > /dev/null
1260	cd ${local_source_path}/../UTIL
1261
1262
1263	# KOPIEREN DER UTILITY-PROGRAMME
1264	if [[ $local_host = decalpha ]]
1265	then
1266	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
1267	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1268	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1269	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
1270	/bin/scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
1271	else
1272	scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
1273	fi
1274
1275
1276
1277	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1278	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
1279	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
1280	# Z.B. DIE PFADE ZUM COMPILER)
1281	echo " *** execute \"make\" on remote host"
1282
1283	if [[ $remote_host = nech ]]
1284	then
1285	make_call_string="sxmake $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1286	else
1287	make_call_string="make $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1288	fi
1289
1290	# generate command to load modules, if modules are given
1291	if [[ "$modules" != "" ]]
1292	then
1293	if [[ $remote_host = lctit ]]
1294	then
1295	module_calls=". $modules"
1296	else
1297	module_calls="module load ${modules};"
1298	fi
1299
1300	# bugfix for wrong netcdf module
1301	if [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
1302	then
1303	if [[ $(echo $module_calls \| grep -c netcdf/3.6.3-intel) != 0 ]]
1304	then
1305	module_calls="$module_calls export LD_LIBRARY_PATH=/sw/dataformats/netcdf/3.6.3-intel/lib:\$LD_LIBRARY_PATH;"
1306	fi
1307	fi
1308	else
1309	module_calls=""
1310	fi
1311
1312
1313	if [[ $remote_host = ibms \|\| $remote_host = ibmy ]]
1314	then
1315
1316	ssh ${remote_username}@${remote_addres} "$init_cmds $module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR"
1317
1318	elif [[ $remote_host = ibmh ]]
1319	then
1320
1321	print "$init_cmds $module_calls export OBJECT_MODE=64; cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres}
1322
1323	elif [[ $remote_host = lctit ]]
1324	then
1325
1326	echo " " > ${remote_host}_last_make_protokoll
1327	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
1328	do
1329	print "$init_cmds $module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1330	done
1331
1332	elif [[ $remote_host = lcxe6 ]]
1333	then
1334
1335	ssh ${remote_username}@${remote_addres} "$init_cmds $module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
1336
1337	else
1338
1339	print "$init_cmds $module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1340
1341	fi
1342
1343	fi # ENDE UEBERSETZUNG DER UTILITY-PROGRAMME
1344
1345	rm -rf ${remote_host}_last_make_protokoll
1346
1347	# make on local host
1348	else
1349
1350	# workaround for lcxe6
1351	if [[ $remote_host = lcxe6 ]]
1352	then
1353
1354	eval $init_cmds
1355
1356	fi
1357
1358	# first load modules, if given
1359	if [[ "$modules" != "" ]]
1360	then
1361	if [[ $remote_host = lctit ]]
1362	then
1363	. $modules
1364	else
1365	module load ${modules}
1366	fi
1367	fi
1368
1369
1370	if [[ $compile_utility_programs = false ]]
1371	then
1372
1373	# DEPOSITORY VERZEICHNIS ERZEUGEN, FALLS NOCH NICHT VORHANDEN
1374	eval remote_md=$remote_md
1375	if [[ ! -d $remote_md ]]
1376	then
1377	if mkdir $remote_md
1378	then
1379	printf "\n\n *** directory for make depository:"
1380	printf "\n $remote_md"
1381	printf "\n was created\n"
1382	else
1383	printf "\n +++ directory for make depository:"
1384	printf "\n $remote_md"
1385	printf "\n cannot be created"
1386	locat=local_depository_path; exit
1387	fi
1388	fi
1389
1390	# QUELLTEXT-DATEIEN AUS REPOSITORY INS DEPOSITORY KOPIEREN
1391	echo " "
1392	echo " *** updating sources in $remote_md"
1393	cd $remote_md
1394	cp $local_source_path/${mainprog}_sources.tar .
1395	tar xf ${mainprog}_sources.tar
1396
1397	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF LOKALEM RECHNER AUSFUEHREN
1398	echo " "
1399	echo " *** execute \"make\" on local host"
1400
1401	make $make_options PROG=$mainprog F90=$compiler_name COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options" 2>&1 \| tee ${remote_host}_last_make_protokoll
1402
1403	if [[ $? != 0 ]]
1404	then
1405	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1406	if [[ $silent = false ]]
1407	then
1408	answer=dummy
1409	printf "\n"
1410	while [[ "$answer" != c && "$answer" != k ]]
1411	do
1412	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
1413	read answer
1414	if [[ "$answer" = l ]]
1415	then
1416	more ${remote_host}_last_make_protokoll
1417	fi
1418	done
1419	if [[ $answer = k ]]
1420	then
1421	locat=user_abort; exit
1422	fi
1423	fi
1424	fi
1425
1426
1427	# TAR NEW VERSION ON LOCAL HOST
1428	printf "\n *** tar update on local host ..."
1429	tar -cf ${mainprog}_current_version.tar .$suf .o *.mod
1430
1431
1432	# COMPILE THE UTILITY PROGRAMS
1433	elif [[ $compile_utility_programs = true ]]
1434	then
1435	printf "\n\n"
1436	echo " *** compiling the utility programs ..."
1437	cd ${local_source_path}/../UTIL
1438
1439	# TOUCH FILES IN ORDER TO FORCE COMPILATION FOR EVERY BLOCK
1440	touch *.f90
1441	make $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options"
1442
1443	# CHECK IF QMAKE IS AVAILABLE AND COMPILE MRUNGUI
1444	if [[ $util_compiled_localhost == false ]]
1445	then
1446	printf "\n\n"
1447	echo " *** compiling the mrun GUI"
1448	if which qmake >/dev/null; then
1449	cd mrungui
1450	touch *
1451	qmake
1452	make
1453	make clean
1454	rm Makefile
1455	cd ..
1456	else
1457	echo " +++ no qmake found. The (optional) GUI will not be compiled."
1458	fi
1459
1460	# COMPILE CHECK_NAMELIST_FILES (ONLY FOR ONE BRANCH on LOCALHOST NEEDED)
1461
1462	printf "\n\n"
1463	echo " *** compiling check_namelist_files ..."
1464
1465	# GET CHECK OPTIONS
1466	line=""
1467	found=false
1468	grep "$remote_host_string" $config_file \| grep "%cpp_options" > $tmp_mbuild
1469	while read line1
1470	do
1471
1472	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
1473	then
1474	line="$line1"
1475	fi
1476
1477	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
1478	then
1479	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING UND ALLE -D ENTFERNEN
1480	line="$line "
1481	copts_check=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g' \| sed 's/-D[^ ]* //g' \| sed 's/ -D.*//g'`
1482	found=true
1483	fi
1484
1485	done < $tmp_mbuild
1486	copts_check="$copts_check -D__check -D__parallel"
1487
1488	check_depository_path=${local_source_path}/../UTIL
1489	cd $check_depository_path
1490	mkdir check_tmp
1491	cp ${local_source_path}/${mainprog}_sources_check.tar ./check_tmp
1492	cd check_tmp
1493	tar -xf ${mainprog}_sources_check.tar
1494	rm -rf ${mainprog}_sources_check.tar
1495
1496	make -f Makefile_check $make_options F90=$compiler_name_ser COPT="$copts_check"
1497	tar -cf check_namelist_files.tar Makefile_check check_namelist_files.x .f90 .o *.mod
1498	mv check_namelist_files.tar $check_depository_path
1499	mv check_namelist_files.x $PALM_BIN
1500	cd $check_depository_path
1501	rm -rf check_tmp
1502	util_compiled_localhost=true
1503	else
1504	cd $check_depository_path
1505	printf "\n\n"
1506	echo " *** skipped compilation of mrun GUI."
1507	printf "\n\n"
1508	echo " *** skipped compilation of check_namelist_files."
1509	fi
1510
1511	fi
1512	fi
1513	done
1514
1515
1516	if [[ $host_found = false ]]
1517	then
1518	if [[ $host = all ]]
1519	then
1520	printf "\n +++ no hosts found in configuration file"
1521	else
1522	printf "\n +++ host \"$host\" not found in configuration file"
1523	fi
1524	locat=config_file; exit
1525	fi
1526
1527	if [[ "$block_conditions" != none && $block_conditions_found = false ]]
1528	then
1529	printf "\n +++ block conditions \"$block_conditions\" not found for host \"$host\""
1530	fi
1531
1532
1533	# FINAL WORK
1534	rm -f hosts_found_in_config_file
1535	rm -f ${local_source_path}/${mainprog}_sources_check.tar
1536

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |