Home

Context Navigation

source: palm/trunk/SCRIPTS/mbuild @ 924

Last change on this file since 924 was 920, checked in by maronga, 12 years ago
Bugfixes for the parameter file check. New mrun option switches off combine_plot_fields
Property svn:keywords set to `Id Rev`
File size: 53.1 KB

Rev	Line
[1]	1	#!/bin/ksh
[503]	2	# mbuild - script for compiling the PALM code and its utility programs
[169]	3	# $Id: mbuild 920 2012-06-05 09:56:53Z maronga $
[1]	4
[503]	5	# Procedure to compile code on local and remote hosts using the
	6	# make-mechanism. The source code must be provided on the local host.
[1]	7
[503]	8	# Last changes:
	9	# 06/05/02 - Siggi - start development
	10	# 12/06/02 - Siggi - first version finished
	11	# 12/09/02 - Siggi - ibmh (hanni.hlrn.de) included
	12	# 19/12/02 - Siggi - ibmb included
[1]	13	# 05/02/03 - Siggi - hostname nobela included
	14	# 04/03/03 - Siggi - host nech included
	15	# 06/03/03 - Siggi - make_call_string is echoed without '' to
	16	# file LAST_MAKE_CALL (otherwise error on NEC, because
	17	# '' are part of compiler options
	18	# 16/03/03 - Siggi - Two underscores are placed in front of every define
	19	# string, in case that palm.f90 version contains
	20	# such strings
	21	# 16/04/03 - Siggi - First extensions for linux machines
	22	# 24/06/03 - Siggi - host orkan included
	23	# 17/07/03 - Siggi - IP adress set to new "cross" machine at DKRZ
	24	# 24/07/03 - Siggi - host maestro admitted
	25	# 06/08/03 - Siggi - host gregale admitted
	26	# 05/11/03 - Siggi - hosts irifi and quanero are now belonging to lcmuk
	27	# 19/11/03 - Heiko - on lcmuk, mbuild does not tar the *.i files
	28	# 08/01/04 - Siggi - additional preprocessor directive for ibm included
	29	# (-D$OMP=OMP) in order to avoid problems with
	30	# OMP_NUM_THREADS
	31	# 09/01/04 - Siggi - action above cancelled
	32	# 28/01/04 - Siggi - action above re-cancelled
	33	# 08/03/04 - Siggi - host scirocco admitted
	34	# 26/03/04 - Siggi - .o and .mod files are also deleted in depository, if
	35	# the respective .f90 file is not listed in the makefile
	36	# and deletion is demanded by the user
	37	# 12/04/04 - Siggi - scp2 instead of scp used for transfer from decalpha
	38	# due to error in ssh installation (otherwise a prompt
	39	# for the password appears)
	40	# 23/07/04 - Siggi - changes due to the new berni configuration
	41	# (federation switch)
	42	# 08/09/04 - Siggi - hanni IP address changed to 130.75.4.10
	43	# 23/09/04 - Joerg - correction of IP-Address for 'cross' (DKRZ)
	44	# 09/03/05 - Siggi - on nech, mbuild does not tar the *.i files
	45	# 31/03/05 - Siggi - mbuild does not tar *.i files any more
	46	# 24/04/05 - Siggi - netcdf support on lcmuk
	47	# 25/04/05 - Siggi - netcdf support on gfdl3 (decalpha)
	48	# 12/05/05 - Siggi - netcdf support on ibm
	49	# set OBJECT_MODE=64 for compiling on ibmb, ibmh
	50	# 18/05/05 - Siggi - netcdf support on nec
	51	# 19/05/05 - Siggi - IP addres 134.75.155.74 changed to 165.132.26.56
	52	# 23/05/05 - Siggi - netcdf support on ibms
	53	# 01/06/05 - Siggi - reset of cpp_options to "" on lcmuk
	54	# 30/06/05 - Siggi - netcdf support on bora
	55	# 20/10/05 - Siggi - update of netcdf-version on decalpha (gfdl3)
	56	# 04/11/05 - Siggi - netcdf 3.6.0-p1 on ibmh/ibmb
	57	# 30/12/05 - Siggi - change of IP adresses in subnet 130.75.105
	58	# host gfdl5 (ibmy) admitted
	59	# 10/01/06 - Siggi - cpp directive for NetCDF 64bit support
	60	# 20/01/06 - Siggi - cpp directive for ibmy
	61	# 09/02/06 - Marcus- compile only once on lcmuk (as on ibmh/ibmb)
	62	# 10/02/06 - Siggi - modifications for scp on decalpha
	63	# 13/04/06 - Siggi - ostria admitted
	64	# 19/04/06 - Siggi - preprocessor directive -D$OMP=OMP for ibm removed
	65	# 23/05/05 - Siggi - lctit (SUN Fire X4600) admitted
	66	# 29/05/05 - Siggi - atmos (lcide) admitted
	67	# 23/08/06 - Siggi - netcdf support for scirocco (notebook)
	68	# 24/11/06 - Siggi - breva and levanto admitted
	69	# 07/02/07 - Siggi - adapted for RIAM (neck)
[5]	70	# 10/02/07 - Siggi - all hpmuk-related code removed
[40]	71	# 02/03/07 - Siggi - compilation of utility programs and transfer of
[27]	72	# scripts to remote hosts added (option -u)
[66]	73	# 14/03/07 - Siggi - fimm admitted, revision number added to terminal
	74	# output
[69]	75	# 16/03/07 - Siggi - adjustments (netcdf) for lctit
	76	# adjustments for running under pdksh, local ip-addres
	77	# is not determined any more
[82]	78	# 30/03/07 - Siggi - cpp-directives/options + netcdf-options are read
	79	# from configuration file
	80	# host identifier (local_host) is read from config file
[116]	81	# 10/10/07 - Siggi - bugfix: handling of comment lines
[181]	82	# 18/07/08 - Siggi - adapted for lcsgih
	83	# 21/07/08 - Siggi - mainprog (executable) is added to the tar-file
	84	# ({mainprog}_current_version)
[206]	85	# 02/10/08 - Siggi - adapted for lcxt4
[215]	86	# 14/11/08 - Siggi - update mechanism completely revised: source tarfile
	87	# remains in source directory, one depository per block
[266]	88	# (given in the config-file) is created, allways all
	89	# files from the source directory are copied to the
	90	# respective depository, no additional file checks are
	91	# done any more (version 2.1)
[224]	92	# 13/01/09 - Marcus- re-enable compilation more than once on lcmuk (as on
	93	# other machines)
[266]	94	# 21/03/09 - Siggi - -u copies also copies process_dvr_output and
	95	# .dvrserver.config
[305]	96	# 21/04/09 - Siggi - adjustments for new IBM at DKRZ, which is now ibmh
[367]	97	# 25/08/09 - BjornM- adapted for lck
[407]	98	# 01/12/09 - BjornM- re-adjustments for lcxt4
[437]	99	# 01/02/10 - Siggi - adjustments for lcxt5m
[475]	100	# 03/02/10 - Siggi - make options (mopts) to be set by configuration file
	101	# implemented, remoted mode option -r completely
	102	# removed, t3e related parts removed
[492]	103	# 26/02/10 - BjornM- re-adjustments for lcxt4 (new modules)
[493]	104	# 01/03/10 - Siggi - mpilib replaced by modules: explicit module settings
	105	# removed; modules should now be given in the
	106	# configuration file
[503]	107	# 02/03/10 - Siggi - utility programs are created separately for each
	108	# block in the configuration file,
	109	# parallel make for utility programs
[508]	110	# 12/03/10 - Siggi - bugfix: remode_md was given a wrong value
[544]	111	# 16/08/10 - BjornM- bugfix: call of modules on local host, new workaround
	112	# for lcxt4
[555]	113	# 07/09/10 - Siggi - bugfix for wrong netcdf/3.6.3 module on lcsgi
[622]	114	# 08/12/10 - Siggi - initialization of the module command changed for
	115	# SGI-ICE/lcsgi
	116	# adjustments for Kyushu Univ. (lcrte, ibmku)
[635]	117	# 14/12/10 - Siggi - adjustments for new Tsubame system at Tokyo
	118	# institute of technology (lctit)
[693]	119	# 04/03/11 - BjornM- re-adjustments for lcxt4
	120	# 06/03/11 - Siggi - adjustments for ibmkisti
[717]	121	# 03/04/11 - Micha - added lckordi
[740]	122	# 17/08/11 - Siggi - HLRN access via hicegate0 (130.75.4.101)
[784]	123	# 27/11/11 - Siggi - Bugfix for make options setting (-j)
[793]	124	# 12/12/11 - BjornM- added mrun GUI to ulitity programs
[807]	125	# 25/01/12 - BjornM- compilation of check_namelist_files (namelist file
	126	# check program) has been added to the utility branch),
	127	# modfified the compilation of mrungui
[811]	128	# 31/01/12 - BjornM- bugfix for compilation of utility programs on
	129	# multiple localhost branches
[818]	130	# 08/03/12 - BjornM- bugfix: cpp directive for namelist check program
	131	# corrected
[892]	132	# 02/05/12 - Bjoern - lcxt4 is now lcxe6, adjustments for lcxe6,
	133	# bugfixes for the parameter file check, initial
	134	# commands on ssh calls sourced out to .mrun.config
[920]	135	# 05/06/12 - Bjoern - bugfixes for execution of login_init_cmd
[1]	136
	137
[503]	138	# VARIABLE DECLARATIONS + DEFAULT VALUES
[22]	139	compile_utility_programs=false
[1]	140	config_file=.mrun.config
[67]	141	fimm=false
[1]	142	host=all
	143	host_found=false
	144	locat=normal
	145	makefile=""
[493]	146	module_calls=""
[811]	147	util_compiled_localhost=false
[1]	148	scirocco=false
	149	silent=false
	150	suf=f90
	151	update=false
[83]	152	working_directory=`pwd`
[1]	153
	154	typeset -i ih ihost=0
	155
[66]	156	typeset -R30 calltime
[1]	157	typeset -L20 column1
	158	typeset -L50 column2
	159	typeset -L70 column3
[215]	160	typeset -L40 version="MBUILD 2.1 Rev$Rev: 920 $"
[1]	161
[503]	162	# ERROR HANDLING
	163	# IN CASE OF EXIT:
[83]	164	trap 'rm -rf $working_directory/tmp_mbuild
[69]	165	if [[ $locat != normal ]]
[1]	166	then
	167	printf "\n\n +++ mbuild killed \n\n"
	168	else
	169	printf "\n\n *** mbuild finished \n\n"
	170	fi' exit
	171
	172
[503]	173	# IN CASE OF TERMINAL-BREAK:
[83]	174	trap 'rm -rf $working_directory/tmp_mbuild
[69]	175	printf "\n\n +++ mbuild killed by \"^C\" \n\n"
[1]	176	exit
	177	' 2
	178
	179
[215]	180	tmp_mbuild=${working_directory}/tmp_mbuild
[1]	181
[503]	182	# READ SHELLSCRIPT-OPTIONS
[475]	183	while getopts :c:h:m:s:u option
[1]	184	do
	185	case $option in
	186	(c) config_file=$OPTARG;;
	187	(h) host=$OPTARG;;
	188	(m) makefile=$OPTARG;;
	189	(s) suf=$OPTARG;;
[22]	190	(u) compile_utility_programs=true;;
[1]	191	(\?) printf "\n +++ unknown option $OPTARG \n";
	192	locat=parameter; exit;;
	193	esac
	194	done
	195
	196
	197
[503]	198	# CHECK, IF CONFIGURATION-FILE EXISTS
[82]	199	if [[ ! -f $config_file ]]
	200	then
	201	printf "\n +++ configuration file: "
	202	printf "\n $config_file"
	203	printf "\n does not exist"
	204	locat=configuration; exit
	205	fi
	206
	207
	208
[503]	209	# DETERMINE THE LOCAL HOST
[1]	210	local_host_real_name=$(hostname)
[69]	211	# local_addres=$(nslookup `hostname` 2>&1 \| grep "Address:" \| tail -1 \| awk '{print $2}')
	212
[1]	213
[82]	214
[503]	215	# DETERMINE HOST-IDENTIFIER (local_host) FROM THE CONFIG-FILE
[82]	216	line=""
[215]	217	grep "%host_identifier" $config_file > $tmp_mbuild
[82]	218	while read line
	219	do
[116]	220	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
[82]	221	then
	222	HOSTNAME=`echo $line \| cut -d" " -s -f2`
	223	host_identifier=`echo $line \| cut -d" " -s -f3`
[83]	224	if [[ $local_host_real_name = $HOSTNAME ]]
[82]	225	then
	226	local_host=$host_identifier
	227	break
	228	fi
	229	fi
[215]	230	done < $tmp_mbuild
[82]	231
	232	if [[ "$local_host" = "" ]]
	233	then
	234	printf "\n +++ no host identifier found in configuration file \"$config_file\""
	235	printf "\n for local host \"$local_host_real_name\"."
	236	printf "\n Please add line"
	237	printf "\n \"\%host_identifier $local_host_real_name <identifier>\""
	238	printf "\n to the configuration file."
	239	locat=local_host; exit
	240	fi
	241
	242
	243
[1]	244	[[ $local_host_real_name = scirocco ]] && scirocco=true
[67]	245	[[ $local_host_real_name = fimm.bccs.uib.no ]] && fimm=true
[1]	246
	247
	248
	249	if [[ $local_host != ibms ]]
	250	then
	251	config_file=$PWD/$config_file
	252	else
	253	config_file=`pwd`/$config_file
	254	fi
	255
	256
	257
[503]	258	# DETERMINE USER NAME ON LOCAL HOST FROM THE CONFIG-FILE
[1]	259	line=""
[215]	260	grep " $local_host" $config_file \| grep "%remote_username" > $tmp_mbuild
[69]	261	while read line
[1]	262	do
[116]	263	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
[1]	264	then
	265	local_username=`echo $line \| cut -d" " -s -f2`
	266	fi
[215]	267	done < $tmp_mbuild
[1]	268
[82]	269
[1]	270	if [[ "$local_username" = "" ]]
	271	then
	272	printf "\n +++ no user name found in configuration file"
	273	printf "\n for local host \"$local_host\" "
	274	locat=config_file; exit
	275	fi
	276
	277
[503]	278	# DETERMINE LOCAL SOURCE-CODE PATH.
	279	# FIRST CHECK, IF A GLOBAL SOURCE-CODE PATH HAS BEEN DECLARED FOR ALL HOSTS.
	280	# THEREFORE, FIRST SET ALL GLOBAL VARIABLES DECLARED IN THE CONFIG-FILE,
	281	# BECAUSE THEY MAY BE USED AS PART OF THE PATH NAME.
[5]	282	line=""
[215]	283	grep "%" $config_file > $tmp_mbuild
[69]	284	while read line
[5]	285	do
[116]	286	if [[ "$line" != "" && "$(echo $line \| cut -d" " -s -f3)" = "" && $(echo $line \| cut -c1) != "#" ]]
[1]	287	then
[5]	288	var=`echo $line \| cut -d" " -s -f1 \| cut -c2-`
	289	value=`echo $line \| cut -d" " -s -f2`
[8]	290	eval export $var=\$value
[1]	291	fi
[215]	292	done < $tmp_mbuild
[1]	293
[503]	294	# NOW CHECK, IF A GLOBAL SOURCE-CODE-PATH HAS BEEN DECLARED
[1]	295	line=""
[215]	296	grep "%source_path" $config_file > $tmp_mbuild
[69]	297	while read line
[1]	298	do
	299	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	300	then
	301	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
	302	then
	303	global_source_path=`echo $line \| cut -d" " -s -f2`
	304	fi
	305	fi
[215]	306	done < $tmp_mbuild
[1]	307
	308	line=""
[215]	309	grep " $local_host" $config_file \| grep "%source_path" > $tmp_mbuild
[69]	310	while read line
[1]	311	do
	312	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	313	then
	314	local_source_path=`echo $line \| cut -d" " -s -f2`
	315	fi
[215]	316	done < $tmp_mbuild
[1]	317
	318	if [[ "$local_source_path" = "" ]]
	319	then
	320	if [[ "$global_source_path" != "" ]]
	321	then
	322	local_source_path=$global_source_path
	323	else
	324	printf "\n +++ no source path found in configuration file"
	325	printf "\n for local host \"$local_host\" "
	326	printf "\n please set \"\%source_path\" in configuration file"
	327	locat=config_file; exit
	328	fi
	329	fi
	330	eval local_source_path=$local_source_path
[8]	331	eval local_source_path=$local_source_path
[1]	332
	333
[215]	334
[503]	335	# DETERMINE GLOBAL DEPOSITORY-PATH
[1]	336	line=""
[215]	337	grep "%depository_path" $config_file > $tmp_mbuild
[69]	338	while read line
[1]	339	do
	340	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	341	then
	342	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
	343	then
	344	global_depository_path=`echo $line \| cut -d" " -s -f2`
	345	fi
	346	fi
[215]	347	done < $tmp_mbuild
[1]	348
[807]	349	if [[ $found = false ]]
	350	then
	351	printf "\n +++ no \%depository_path found in"
	352	printf "\n $config_file"
	353	locat=depository_path; exit
	354	fi
[1]	355
[503]	356	# CHECK, IF A MAIN PROGRAM HAS BEEN DEFINED IN THE CONFIG-FILE
[5]	357	if [[ $(grep -c "%mainprog" $config_file) != 1 ]]
	358	then
	359	printf "\n +++ no main program or more than one main program defined"
	360	printf "\n in configuration file"
	361	locat=configuration; exit
	362	else
	363	line=`grep "%mainprog" $config_file`
	364	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
	365	then
	366	printf "\n +++ no main program defined in configuration file"
	367	locat=configuration; exit
	368	fi
	369	mainprog=`echo $line \| cut -d" " -s -f2 \| cut -d"." -f1`
	370	fi
	371
	372
	373
[503]	374	# CHECK IF MAKEFILE EXITS
[1]	375	[[ "$makefile" = "" ]] && makefile=$local_source_path/Makefile
	376	if [[ ! -f $makefile ]]
	377	then
	378	printf "\n +++ makefile: "
	379	printf "\n $makefile"
	380	printf "\n does not exist"
	381	locat=makefile; exit
	382	fi
	383
	384
[503]	385	# HEADER-OUTPUT (PART1: MESSAGES CONCERNING THE LOCAL HOST)
[1]	386	calltime=$(date)
	387	printf "\n"
	388	printf "#------------------------------------------------------------------------# \n"
	389	printf "\| $version$calltime \| \n"
	390	printf "\| \| \n"
	391	column1="called on:"; column2=$local_host_real_name
	392	printf "\| $column1$column2 \| \n"
	393	column1="local username:"; column2=$local_username
	394	printf "\| $column1$column2 \| \n"
	395	column1="local IP-addres:"; column2=$local_addres
	396	printf "\| $column1$column2 \| \n"
	397	column1="config file:"; column2=$config_file
	398	printf "\| $column1$column2 \| \n"
	399	column1="makefile:"; column2=$makefile
	400	printf "\| $column1$column2 \| \n"
	401	column1="local source path:"; column2=$local_source_path
	402	printf "\| $column1$column2 \| \n"
	403	printf "#------------------------------------------------------------------------# \n"
	404
	405	# printf "\| \| \n"
	406
	407
[40]	408	if [[ $compile_utility_programs = false ]]
	409	then
[1]	410
[503]	411	# IN ANY CASE, GIVE ALL FILES WRITE-PERMIT, IN ORDER TO AVOID PROBLEMS
	412	# WITH OVERWRITING FILES ON THE REMOTE HOST
[215]	413	cd $local_source_path
	414	printf "\n\n *** tar of makefile and source files in $local_source_path"
[40]	415	tar -cf ${mainprog}_sources.tar Makefile *.$suf
	416	printf "\n"
[1]	417
[807]	418	else
	419	cd $local_source_path
	420	printf "\n\n *** tar of makefile and source files in $local_source_path"
	421
	422	cat Makefile_check\|while read line
	423	do
	424	line=$(echo $line\|grep RCS)
	425	if [[ $line == "RCS" ]]
	426	then
	427	line=$(echo $line\|sed 's/RCS = //g')
	428	break
	429	fi
	430	done
	431
	432	tar -cf ${mainprog}_sources_check.tar Makefile_check $line
	433	printf "\n"
[40]	434	fi
[1]	435
	436
[40]	437
[503]	438	# GET CONFIRMATION TO CONTINUE
[1]	439	if [[ $host = all ]]
	440	then
	441	printf "\n *** updates will be made for ALL hosts found in"
	442	printf "\n the configuration file"
	443	else
	444	printf "\n *** update will be made for host \"$host\" "
	445	fi
	446
	447	if [[ $silent = false ]]
	448	then
	449	answer=dummy
	450	printf "\n\n"
	451	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
	452	do
	453	printf " >>> continue (y/n) ? "
	454	read answer
	455	done
	456	if [[ $answer = n \|\| $answer = N ]]
	457	then
	458	locat=user_abort; exit
	459	fi
	460	fi
	461
	462
	463
	464
	465	# GENERIERUNG DER AKTUELLEN MODELLVERSION FUER ALLE RECHNER-/UEBERSETZUNGS-
	466	# VERSIONEN, DIE IN DER KONFIGURATIONSDATEI GEFUNDEN WERDEN
	467	printf "\n *** scanning configuration file for host(s) ..."
	468
[215]	469	grep %fopts $config_file > $tmp_mbuild
[69]	470	while read line
[1]	471	do
	472	# KOMMENTARZEILEN UEBERSPRINGEN
	473	[[ $(echo $line \| cut -c1) = "#" ]] && continue
	474	(( ihost = ihost + 1 ))
	475	hostline[$ihost]="$line"
[215]	476	done < $tmp_mbuild
[1]	477
	478
	479	while (( ih < ihost ))
	480	do
	481
	482	(( ih = ih + 1 ))
	483
	484	# REMOTE-RECHNER UND UEBERSETZUNGS-VERSION FESTSTELLEN
	485	# NUR WEITERMACHEN, WENN ENTSPRECHENDER REMOTE-RECHNER MITTELS
	486	# SHELLSCRIPT-OPTION AUCH AUSGEWAEHLT WURDE
	487	remote_host_string=`echo ${hostline[$ih]} \| cut -d" " -s -f3-`
	488	remote_host=`echo $remote_host_string \| cut -d" " -f1`
	489	if [[ $host != all ]]
	490	then
	491	[[ $remote_host != $host ]] && continue
	492	fi
	493	host_found=true
	494	condition1=`echo $remote_host_string \| cut -d" " -s -f2`
	495	if [[ $condition1 = $remote_host ]]
	496	then
	497	condition1=""
	498	else
	499	condition2=`echo $remote_host_string \| cut -d" " -s -f3`
	500	fi
	501
[493]	502	modules=""
[82]	503	netcdf_inc=""
	504	netcdf_lib=""
[784]	505	make_options=""
[1]	506
	507	# IP-ADRESSE DES REMOTE-RECHNERS BESTIMMEN
	508	case $remote_host in
[717]	509	(lckordi) remote_adress=210.219.61.8;;
[116]	510	(lcmuk) remote_addres=130.75.105.2;;
[622]	511	(lcrte) remote_addres=133.5.185.60;;
[181]	512	(lcsgib) remote_addres=130.73.232.102;;
[740]	513	(lcsgih) remote_addres=130.75.4.101;;
[367]	514	(lck) remote_addres=165.132.26.61;;
[635]	515	(lctit) remote_addres=10.1.6.170;;
[892]	516	(lcxe6) remote_addres=129.177.20.113;;
[437]	517	(lcxt5m) remote_addres=193.166.211.144;;
[83]	518	(decalpha) remote_addres=165.132.26.56;;
[305]	519	(ibmh) remote_addres=136.172.40.15;;
[693]	520	(ibmkisti) remote_addres=150.183.146.24;;
[622]	521	(ibmku) remote_addres=133.5.4.129;;
[83]	522	(ibms) remote_addres=150.183.5.101;;
	523	(ibmy) remote_addres=165.132.26.58;;
	524	(nech) remote_addres=136.172.44.192;;
	525	(neck) remote_addres=133.5.178.11;;
	526	(ground.yonsei.ac.kr) remote_addres=134.75.155.33;;
	527	(*) if [[ $local_host != $remote_host ]]
[1]	528	then
[83]	529	printf "\n +++ remote host \"$remote_host\" unknown";
[503]	530	printf "\n please inform PALM group support!"
[1]	531	fi;;
	532	esac
	533
	534
	535	# REMOTE-USERNAMEN ERMITTELN
	536	line=""
[116]	537	found=false
[215]	538	grep "$remote_host_string" $config_file \| grep "%remote_username" > $tmp_mbuild
[69]	539	while read line1
[1]	540	do
[116]	541
[1]	542	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	543	then
	544	line="$line1"
	545	fi
[116]	546
	547	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	548	then
	549	remote_username=`echo $line \| cut -d" " -s -f2`
	550	found=true
	551	fi
	552
[215]	553	done < $tmp_mbuild
[1]	554
[116]	555	if [[ $found = false ]]
[1]	556	then
	557	printf "\n +++ no remote username found in configuration file"
	558	printf "\n for \"$remote_host_string\" "
	559	locat=config_file; exit
	560	fi
	561
	562
	563	# REMOTE-QUELLTEXTPFAD ERMITTELN
	564	line=""
[54]	565	remote_source_path=""
[215]	566	grep "$remote_host_string" $config_file \| grep "%source_path" > $tmp_mbuild
[69]	567	while read line1
[1]	568	do
[116]	569
[1]	570	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	571	then
	572	line="$line1"
	573	fi
[116]	574
	575	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	576	then
	577	remote_source_path=`echo $line \| cut -d" " -s -f2`
	578	fi
	579
[215]	580	done < $tmp_mbuild
[1]	581
	582	if [[ "$remote_source_path" = "" ]]
	583	then
	584	if [[ "$global_source_path" != "" ]]
	585	then
	586	remote_source_path=$global_source_path
	587	else
	588	printf "\n +++ no source path found in configuration file"
	589	printf "\n for \"$remote_host_string\" "
	590	locat=config_file; exit
	591	fi
	592	fi
	593
[22]	594	remote_ud=${remote_source_path}/../UTIL
[24]	595	remote_ud=$(eval echo $remote_ud)
[1]	596
[54]	597
[1]	598	# REMOTE-PFAD FUER MAKE-DEPOSITORY ERMITTELN
[54]	599	remote_md=""
[1]	600	line=""
[215]	601	grep "$remote_host_string" $config_file \| grep "%depository_path" > $tmp_mbuild
[69]	602	while read line1
[1]	603	do
[116]	604
[1]	605	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	606	then
	607	line="$line1"
	608	fi
[116]	609
	610	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	611	then
	612	remote_md=`echo $line \| cut -d" " -s -f2`
	613	fi
	614
[215]	615	done < $tmp_mbuild
[1]	616
	617	if [[ "$remote_md" = "" ]]
	618	then
	619	if [[ "$global_depository_path" != "" ]]
	620	then
	621	remote_md=$global_depository_path
	622	else
	623	printf "\n +++ no depository path found in configuration file"
	624	printf "\n for \"$remote_host_string\" "
	625	printf "\n please set \"\%depository_path\" in configuration file"
	626	locat=config_file; exit
	627	fi
	628	fi
	629
[8]	630	remote_md=$(eval echo $remote_md)
[503]	631	block=""
	632	[[ "$condition1" != "" ]] && block=_$condition1
	633	[[ "$condition2" != "" ]] && block=${block}_$condition2
[508]	634	remote_md=${remote_md}$block
[1]	635
[8]	636
[1]	637	# COMPILERNAMEN ERMITTELN
	638	line=""
[116]	639	found=false
[215]	640	grep "$remote_host_string" $config_file \| grep "%compiler_name " > $tmp_mbuild
[69]	641	while read line1
[1]	642	do
[116]	643
[1]	644	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	645	then
	646	line="$line1"
	647	fi
[116]	648
	649	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	650	then
	651	compiler_name=`echo $line \| cut -d" " -s -f2`
	652	found=true
	653	fi
	654
[215]	655	done < $tmp_mbuild
[1]	656
[116]	657	if [[ $found = false ]]
[1]	658	then
	659	printf "\n +++ no compiler name found in configuration file"
	660	printf "\n for \"$remote_host_string\" "
	661	locat=config_file; exit
	662	fi
	663
	664
[27]	665	# BEI BENUTZUNG EINES PARALLELEN COMPILERS MUSS AUCH EIN
	666	# SERIELLER COMPILERNAME ERMITTELT WERDEN
	667	if [[ $(echo $remote_host_string \| grep -c parallel) = 1 ]]
	668	then
	669	line=""
[116]	670	found=false
[215]	671	grep "$remote_host_string" $config_file \| grep "%compiler_name_ser" > $tmp_mbuild
[69]	672	while read line1
[27]	673	do
[116]	674
[27]	675	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	676	then
	677	line="$line1"
	678	fi
[116]	679
	680	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	681	then
	682	compiler_name_ser=`echo $line \| cut -d" " -s -f2`
	683	found=true
	684	fi
	685
[215]	686	done < $tmp_mbuild
[1]	687
[116]	688	if [[ $found = false ]]
[27]	689	then
[28]	690	printf "\n +++ no serial compiler name found in configuration file"
[27]	691	printf "\n for \"$remote_host_string\" "
	692	locat=config_file; exit
	693	fi
	694	else
	695	compiler_name_ser=$compiler_name
	696	fi
	697
	698
	699
[82]	700	# PRAEPROZESSOR-OPTIONEN/DIREKTIVEN ERMITTELN
	701	line=""
[116]	702	found=false
[215]	703	grep "$remote_host_string" $config_file \| grep "%cpp_options" > $tmp_mbuild
[82]	704	while read line1
	705	do
[116]	706
[82]	707	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	708	then
	709	line="$line1"
	710	fi
[116]	711
	712	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	713	then
	714	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
	715	cpp_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	716	found=true
	717	fi
	718
[215]	719	done < $tmp_mbuild
[116]	720
	721	if [[ $found = false ]]
[82]	722	then
	723	printf "\n +++ no preprocessor options found in configuration file"
	724	printf "\n for \"$remote_host_string\" "
	725	locat=config_file; exit
	726	fi
	727
[116]	728
[82]	729	# RECHNERSPEZIFISCHE CPP-DIREKTIVEN HINZUFUEGEN
	730	for string in $remote_host_string
	731	do
	732	if [[ $(echo $remote_host \| cut -c1-2) = lc && $(echo $string \| cut -c1-2) = lc ]]
	733	then
	734	cpp_options="$cpp_options -D__lc "
[83]	735	elif [[ $(echo $remote_host \| cut -c1-3) = ibm && $(echo $string \| cut -c1-3) = ibm ]]
	736	then
	737	cpp_options="${cpp_options},-D__ibm"
	738	elif [[ $(echo $remote_host \| cut -c1-3) = nec && $(echo $string \| cut -c1-3) = nec ]]
	739	then
	740	cpp_options="${cpp_options} -D__nec"
[82]	741	else
[83]	742	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
	743	then
	744	cpp_options="${cpp_options},-D__$string"
	745	else
	746	cpp_options="$cpp_options -D__$string "
	747	fi
[82]	748	fi
	749	done
	750
	751
	752
	753	# NETCDF-OPTIONEN ERMITTELN
	754	line=""
[215]	755	grep "$remote_host_string" $config_file \| grep "%netcdf_inc" > $tmp_mbuild
[82]	756	while read line1
	757	do
[116]	758
[82]	759	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	760	then
	761	line="$line1"
	762	fi
[116]	763
	764	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	765	then
	766	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
	767	netcdf_inc=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	768	fi
	769
[215]	770	done < $tmp_mbuild
[82]	771
	772	line=""
[215]	773	grep "$remote_host_string" $config_file \| grep "%netcdf_lib" > $tmp_mbuild
[82]	774	while read line1
	775	do
[116]	776
[82]	777	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	778	then
	779	line="$line1"
	780	fi
[116]	781
	782	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	783	then
	784	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
	785	netcdf_lib=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	786	fi
	787
[215]	788	done < $tmp_mbuild
[82]	789
	790
	791
[475]	792	# get make options
	793	line=""
	794	found=false
	795	grep "$remote_host_string" $config_file \| grep "%mopts" > $tmp_mbuild
	796	while read line1
	797	do
	798
	799	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	800	then
	801	line="$line1"
	802	fi
	803
	804	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	805	then
	806	# remove colons from directive string
	807	make_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	808
	809	fi
	810
	811	done < $tmp_mbuild
	812
	813
	814
[1]	815	# COMPILEROPTIONEN ERMITTELN
	816	line=""
[116]	817	found=false
[215]	818	grep "$remote_host_string" $config_file \| grep "%fopts" > $tmp_mbuild
[69]	819	while read line1
[1]	820	do
[116]	821
[1]	822	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	823	then
	824	line="$line1"
	825	fi
[116]	826
	827	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	828	then
	829	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
	830	compiler_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	831	found=true
	832
	833	# NETCDF-INCLUDEVERZEICHNIS HINZUFUEGEN
	834	compiler_options="$compiler_options $netcdf_inc"
	835	fi
	836
[215]	837	done < $tmp_mbuild
[116]	838
	839	if [[ $found = false ]]
[1]	840	then
	841	printf "\n +++ no compiler options found in configuration file"
	842	printf "\n for \"$remote_host_string\" "
	843	locat=config_file; exit
	844	fi
[82]	845
[1]	846
[892]	847	# get login init commands, "::" is replacing a space
	848	line=""
	849	grep "$remote_host_string" $config_file \| grep "%login_init_cmd" > $tmp_mbuild
	850	while read line1
	851	do
[1]	852
[892]	853	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	854	then
	855	line="$line1"
	856	fi
	857
	858	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	859	then
	860	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
	861	init_cmds=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	862	fi
	863	init_cmds="${init_cmds};"
	864	done < $tmp_mbuild
	865
	866
[503]	867	# get modules to be loaded
[221]	868	line=""
[493]	869	grep "$remote_host_string" $config_file \| grep "%modules" > $tmp_mbuild
[221]	870	while read line1
	871	do
	872
	873	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	874	then
	875	line="$line1"
	876	fi
	877
	878	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	879	then
	880	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
[493]	881	modules=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
[221]	882	fi
	883
	884	done < $tmp_mbuild
	885
	886
[1]	887	# LADER-OPTIONEN ERMITTELN
	888	line=""
[116]	889	found=false
[215]	890	grep "$remote_host_string" $config_file \| grep "%lopts" > $tmp_mbuild
[69]	891	while read line1
[1]	892	do
[116]	893
[1]	894	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	895	then
	896	line="$line1"
	897	fi
[116]	898
	899	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	900	then
	901	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
	902	loader_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	903	found=true
	904
	905	# NETCDF-LIBRARY HINZUFUEGEN
	906	loader_options="$loader_options $netcdf_lib"
	907	fi
	908
[215]	909	done < $tmp_mbuild
[1]	910
[116]	911	if [[ $found = false ]]
[1]	912	then
	913	printf "\n +++ no loader options found in configuration file"
	914	printf "\n for \"$remote_host_string\" "
	915	locat=config_file; exit
	916	fi
[82]	917
[1]	918
	919	printf "\n\n#------------------------------------------------------------------------# \n"
	920	if [[ $remote_host = $local_host ]]
	921	then
	922	column1="remote_host:"; column2="$remote_host (= local host!)"
	923	else
	924	column1="remote_host:"; column2=$remote_host
	925	fi
	926	printf "\| $column1$column2 \| \n"
	927	printf "\| \| \n"
	928	column1="conditions:"; column2="$condition1 $condition2"
	929	printf "\| $column1$column2 \| \n"
	930	column1="make depository:"; column2=$remote_md
	931	printf "\| $column1$column2 \| \n"
[215]	932	line=$(echo "$remote_md" \| cut -c51-)
	933	while [[ "$line" != "" ]]
	934	do
	935	column1=""
	936	column2=$line
	937	printf "\| $column1$column2 \| \n"
	938	line=$(echo "$line" \| cut -c51-)
	939	done
[25]	940	if [[ $compile_utility_programs = true ]]
	941	then
	942	column1="utility directory:"; column2=$remote_ud
	943	printf "\| $column1$column2 \| \n"
	944	fi
[1]	945	column1="username:"; column2=$remote_username
	946	printf "\| $column1$column2 \| \n"
	947	column1="addres:"; column2=$remote_addres
	948	printf "\| $column1$column2 \| \n"
	949	column1="compiler:"; column2=$compiler_name
	950	printf "\| $column1$column2 \| \n"
[28]	951	if [[ $compile_utility_programs = true ]]
	952	then
	953	column1="serial compiler:"; column2=$compiler_name_ser
	954	printf "\| $column1$column2 \| \n"
	955	fi
[475]	956	if [[ "$make_options" != "" ]]
	957	then
	958	column1="make options:"; column2=$make_options
	959	printf "\| $column1$column2 \| \n"
	960	fi
[1]	961	column1="cpp options:"; column2=$cpp_options
	962	printf "\| $column1$column2 \| \n"
	963	line=$(echo "$cpp_options" \| cut -c51-)
	964	while [[ "$line" != "" ]]
	965	do
	966	column1=""
	967	column2=$line
	968	printf "\| $column1$column2 \| \n"
	969	line=$(echo "$line" \| cut -c51-)
	970	done
	971	column1="compiler options:"; column2=$compiler_options
	972	printf "\| $column1$column2 \| \n"
	973	line=$(echo "$compiler_options" \| cut -c51-)
	974	while [[ "$line" != "" ]]
	975	do
	976	column1=""
	977	column2=$line
	978	printf "\| $column1$column2 \| \n"
	979	line=$(echo "$line" \| cut -c51-)
	980	done
	981	column1="loader options:"; column2=$loader_options
	982	printf "\| $column1$column2 \| \n"
	983	line=$(echo "$loader_options" \| cut -c51-)
	984	while [[ "$line" != "" ]]
	985	do
	986	column1=""
	987	column2=$line
	988	printf "\| $column1$column2 \| \n"
	989	line=$(echo "$line" \| cut -c51-)
	990	done
[493]	991	if [[ $modules != "" ]]
	992	then
	993	column1="modules to be load:"; column2=$modules
	994	printf "\| $column1$column2 \| \n"
	995	line=$(echo "$modules" \| cut -c51-)
	996	while [[ "$line" != "" ]]
	997	do
	998	column1=""
	999	column2=$line
	1000	printf "\| $column1$column2 \| \n"
	1001	line=$(echo "$line" \| cut -c51-)
	1002	done
	1003	fi
[1]	1004	printf "#------------------------------------------------------------------------# \n"
	1005
	1006	if [[ $silent = false ]]
	1007	then
	1008	answer=dummy
	1009	printf "\n\n"
	1010	while [[ "$answer" != y && "$answer" != Y && "$answer" != c && "$answer" != C && "$answer" != s && "$answer" != S && "$answer" != a && "$answer" != A ]]
	1011	do
	1012	printf " >>> continue (y(es)/c(ontinue)/a(bort)/s(skip)) ? "
	1013	read answer
	1014	done
	1015	if [[ $answer = a \|\| $answer = A ]]
	1016	then
	1017	locat=user_abort; exit
	1018	fi
	1019	if [[ $answer = c \|\| $answer = C ]]
	1020	then
[503]	1021	silent=true
[1]	1022	fi
	1023	if [[ $answer = s \|\| $answer = S ]]
	1024	then
	1025	continue
	1026	fi
	1027	fi
	1028
	1029
[475]	1030	# make on remote host
	1031	if [[ $remote_host != $local_host ]]
[1]	1032	then
[475]	1033	if [[ $compile_utility_programs = false ]]
[1]	1034	then
	1035
[475]	1036	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
	1037	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
	1038	echo " *** copying \"${mainprog}_sources.tar\" to \"${remote_addres}:${remote_md}/\" "
	1039	if [[ $remote_host != lctit ]]
	1040	then
	1041	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})"
	1042	else
	1043	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
	1044	# MIT SSH, DESHALB AUFRUF PER PIPE
	1045	print "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})" \| ssh ${remote_username}@${remote_addres} 2>&1
	1046	fi
	1047	if [[ $local_host = decalpha ]]
	1048	then
	1049	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
	1050	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
	1051	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
	1052	remote_md=`echo $remote_md \| sed 's/\$HOME\///'`
	1053	/bin/scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
	1054	else
	1055	scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
	1056	fi
[1]	1057
	1058
	1059
[475]	1060	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
	1061	echo " *** untar previous update on remote host, if existing"
	1062	if [[ $remote_host != lctit ]]
	1063	then
	1064	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar"
	1065	else
	1066	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
	1067	# MIT SSH, DESHALB AUFRUF PER PIPE
	1068	print "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
	1069	fi
[1]	1070
	1071
[475]	1072	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
	1073	echo " *** untar actual sources on remote host"
	1074	if [[ $remote_host != lctit ]]
	1075	then
	1076	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; tar -xf ${mainprog}_sources.tar"
	1077	else
	1078	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
	1079	# MIT SSH, DESHALB AUFRUF PER PIPE
	1080	print "cd ${remote_md}; tar -xf ${mainprog}_sources.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
	1081	fi
[1]	1082
	1083
[475]	1084	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
	1085	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
	1086	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
	1087	# Z.B. DIE PFADE ZUM COMPILER)
	1088	echo " *** execute \"make\" on remote host"
[1]	1089
[493]	1090
	1091	# generate make call with make options
[475]	1092	if [[ $remote_host = nech ]]
	1093	then
	1094	make_call_string="sxmake $make_options PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
	1095	else
	1096	make_call_string="make $make_options PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
	1097	fi
[1]	1098
[493]	1099	# generate command to load modules, if modules are given
	1100	if [[ "$modules" != "" ]]
	1101	then
[678]	1102	if [[ $remote_host = lctit ]]
	1103	then
	1104	module_calls=". $modules"
	1105	else
	1106	module_calls="module load ${modules};"
	1107	fi
[555]	1108
	1109	# bugfix for wrong netcdf module
	1110	if [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
	1111	then
	1112	if [[ $(echo $module_calls \| grep -c netcdf/3.6.3-intel) != 0 ]]
	1113	then
	1114	module_calls="$module_calls export LD_LIBRARY_PATH=/sw/dataformats/netcdf/3.6.3-intel/lib:\$LD_LIBRARY_PATH;"
	1115	fi
	1116	fi
[503]	1117	else
	1118	module_calls=""
[493]	1119	fi
	1120
[693]	1121	if [[ $remote_host = ibmkisti \|\| $remote_host = ibms \|\| $remote_host = ibmy ]]
[475]	1122	then
[1]	1123
[892]	1124	ssh ${remote_username}@${remote_addres} "$init_cmds $module_calls cd ${remote_md}; echo '$make_call_string' > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1125
[475]	1126	elif [[ $remote_host = ibmh ]]
	1127	then
[1]	1128
[892]	1129	print "$init_cmds $module_calls export OBJECT_MODE=64; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1130
[475]	1131	elif [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
	1132	then
[622]	1133	# print ". /usr/share/modules/init/bash; $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[892]	1134	print "$init_cmds $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1135
[475]	1136	elif [[ $remote_host = lctit ]]
	1137	then
[1]	1138
[475]	1139	echo " " > ${remote_host}_last_make_protokoll
	1140	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
	1141	do
	1142	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
	1143	done
[1]	1144
[892]	1145	elif [[ $remote_host = lcxe6 ]]
[1]	1146	then
	1147
[892]	1148	ssh ${remote_username}@${remote_addres} "$init_cmds $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1149
[475]	1150	else
[1]	1151
[892]	1152	print "$init_cmds $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1153
[475]	1154	fi
[1]	1155
[475]	1156	if [[ $(grep -c MAKE_ERROR ${remote_host}_last_make_protokoll) != 0 ]]
	1157	then
	1158	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
	1159	if [[ $silent = false ]]
[40]	1160	then
[475]	1161	answer=dummy
	1162	printf "\n"
	1163	while [[ "$answer" != c && "$answer" != k ]]
[40]	1164	do
[475]	1165	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
	1166	read answer
	1167	if [[ "$answer" = l ]]
	1168	then
	1169	more ${remote_host}_last_make_protokoll
	1170	fi
[40]	1171	done
[475]	1172	if [[ $answer = k ]]
[40]	1173	then
[475]	1174	locat=user_abort; exit
[1]	1175	fi
	1176	fi
[475]	1177	fi
[1]	1178
	1179
	1180
[475]	1181	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
	1182	printf "\n *** tar update on remote host ..."
	1183	if [[ $remote_host != lctit ]]
	1184	then
	1185	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod"
	1186	else
	1187	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
	1188	# MIT SSH, DESHALB AUFRUF PER PIPE
	1189	print "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod" \| ssh ${remote_username}@${remote_addres} 2>&1
	1190	fi
[1]	1191
	1192
[475]	1193	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
	1194	# printf "\n *** \"make clean\" on remote host ..."
	1195	# ssh ${remote_username}@${remote_addres} "cd ${remote_md}; make clean; rm ${mainprog}_sources.tar; rm *.f90 Makefile"
	1196	# printf "\n"
[1]	1197
	1198
[25]	1199
	1200
[475]	1201	# GLEICHE AKTIONEN FUER DIE UTILITY-PROGRAMME DURCHFUEHREN
	1202	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
	1203	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
	1204	elif [[ $compile_utility_programs = true ]]
	1205	then
	1206
	1207	printf "\n\n"
	1208	echo " *** copying scripts and utility programs to \"${remote_addres}:${remote_ud}/\" "
	1209	cd ${local_source_path}/../SCRIPTS
	1210
	1211	if [[ $remote_host != lctit ]]
[22]	1212	then
[475]	1213	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)"
	1214	else
[503]	1215	# TIT ERLAUBT NUR DIE AUSFUEHRUNG GANZ BESTIMMTER KOMMANDOS
[475]	1216	# MIT SSH, DESHALB AUFRUF PER PIPE
	1217	print "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)" \| ssh ${remote_username}@${remote_addres} 2>&1
	1218	fi
[22]	1219
[475]	1220	# KOPIEREN DER SCRIPTE
	1221	if [[ $local_host = decalpha ]]
	1222	then
[503]	1223	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTAENDIGEN PFADES
[475]	1224	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
	1225	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
	1226	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
	1227	/bin/scp batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
	1228	else
	1229	scp batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
	1230	fi
[22]	1231
[475]	1232	cd - > /dev/null
	1233	cd ${local_source_path}/../UTIL
[22]	1234
[27]	1235
[475]	1236	# KOPIEREN DER UTILITY-PROGRAMME
	1237	if [[ $local_host = decalpha ]]
	1238	then
	1239	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
	1240	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
	1241	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
	1242	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
	1243	/bin/scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
	1244	else
	1245	scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
	1246	fi
[27]	1247
	1248
[22]	1249
[475]	1250	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
	1251	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
	1252	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
	1253	# Z.B. DIE PFADE ZUM COMPILER)
	1254	echo " *** execute \"make\" on remote host"
[22]	1255
[475]	1256	if [[ $remote_host = nech ]]
	1257	then
[503]	1258	make_call_string="sxmake $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
[475]	1259	else
[503]	1260	make_call_string="make $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
[475]	1261	fi
[22]	1262
[493]	1263	# generate command to load modules, if modules are given
	1264	if [[ "$modules" != "" ]]
	1265	then
[678]	1266	if [[ $remote_host = lctit ]]
	1267	then
	1268	module_calls=". $modules"
	1269	else
	1270	module_calls="module load ${modules};"
	1271	fi
[562]	1272
	1273	# bugfix for wrong netcdf module
	1274	if [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
	1275	then
	1276	if [[ $(echo $module_calls \| grep -c netcdf/3.6.3-intel) != 0 ]]
	1277	then
	1278	module_calls="$module_calls export LD_LIBRARY_PATH=/sw/dataformats/netcdf/3.6.3-intel/lib:\$LD_LIBRARY_PATH;"
	1279	fi
	1280	fi
[503]	1281	else
	1282	module_calls=""
[493]	1283	fi
	1284
[892]	1285
[475]	1286	if [[ $remote_host = ibms \|\| $remote_host = ibmy ]]
	1287	then
[22]	1288
[892]	1289	ssh ${remote_username}@${remote_addres} "$init_cmds $module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR"
[22]	1290
[475]	1291	elif [[ $remote_host = ibmh ]]
	1292	then
[22]	1293
[892]	1294	print "$init_cmds $module_calls export OBJECT_MODE=64; cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres}
[22]	1295
[475]	1296	elif [[ $remote_host = lctit ]]
	1297	then
[22]	1298
[475]	1299	echo " " > ${remote_host}_last_make_protokoll
	1300	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
	1301	do
[892]	1302	print "$init_cmds $module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[475]	1303	done
[22]	1304
[892]	1305	elif [[ $remote_host = lcxe6 ]]
[475]	1306	then
[22]	1307
[892]	1308	ssh ${remote_username}@${remote_addres} "$init_cmds $module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
[22]	1309
[475]	1310	else
[407]	1311
[892]	1312	print "$init_cmds $module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[407]	1313
[475]	1314	fi
[22]	1315
[475]	1316	fi # ENDE UEBERSETZUNG DER UTILITY-PROGRAMME
[22]	1317
[475]	1318	rm -rf ${remote_host}_last_make_protokoll
[22]	1319
[475]	1320	# make on local host
	1321	else
[22]	1322
[892]	1323	# workaround for lcxe6
	1324	if [[ $remote_host = lcxe6 ]]
[544]	1325	then
[920]	1326
	1327	eval $init_cmds
	1328
[544]	1329	fi
	1330
	1331	# first load modules, if given
	1332	if [[ "$modules" != "" ]]
	1333	then
[678]	1334	if [[ $remote_host = lctit ]]
	1335	then
	1336	. $modules
	1337	else
	1338	module load ${modules}
	1339	fi
[544]	1340	fi
	1341
	1342
[475]	1343	if [[ $compile_utility_programs = false ]]
	1344	then
[22]	1345
[475]	1346	# DEPOSITORY VERZEICHNIS ERZEUGEN, FALLS NOCH NICHT VORHANDEN
	1347	eval remote_md=$remote_md
	1348	if [[ ! -d $remote_md ]]
[40]	1349	then
[475]	1350	if mkdir $remote_md
[215]	1351	then
[475]	1352	printf "\n\n *** directory for make depository:"
	1353	printf "\n $remote_md"
	1354	printf "\n was created\n"
	1355	else
	1356	printf "\n +++ directory for make depository:"
	1357	printf "\n $remote_md"
	1358	printf "\n cannot be created"
	1359	locat=local_depository_path; exit
[215]	1360	fi
[475]	1361	fi
[215]	1362
[475]	1363	# QUELLTEXT-DATEIEN AUS REPOSITORY INS DEPOSITORY KOPIEREN
	1364	echo " "
	1365	echo " *** updating sources in $remote_md"
	1366	cd $remote_md
	1367	cp $local_source_path/${mainprog}_sources.tar .
	1368	tar xf ${mainprog}_sources.tar
[215]	1369
[475]	1370	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF LOKALEM RECHNER AUSFUEHREN
	1371	echo " "
	1372	echo " *** execute \"make\" on local host"
[1]	1373
[475]	1374	make $make_options PROG=$mainprog F90=$compiler_name COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options" 2>&1 \| tee ${remote_host}_last_make_protokoll
[40]	1375
[475]	1376	if [[ $? != 0 ]]
	1377	then
	1378	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
	1379	if [[ $silent = false ]]
[1]	1380	then
[475]	1381	answer=dummy
	1382	printf "\n"
	1383	while [[ "$answer" != c && "$answer" != k ]]
	1384	do
	1385	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
	1386	read answer
	1387	if [[ "$answer" = l ]]
[1]	1388	then
[475]	1389	more ${remote_host}_last_make_protokoll
[1]	1390	fi
[475]	1391	done
	1392	if [[ $answer = k ]]
	1393	then
	1394	locat=user_abort; exit
[1]	1395	fi
	1396	fi
[475]	1397	fi
[1]	1398
	1399
[503]	1400	# TAR NEW VERSION ON LOCAL HOST
[475]	1401	printf "\n *** tar update on local host ..."
	1402	tar -cf ${mainprog}_current_version.tar .$suf .o *.mod
[1]	1403
[22]	1404
[475]	1405	# COMPILE THE UTILITY PROGRAMS
	1406	elif [[ $compile_utility_programs = true ]]
	1407	then
	1408	printf "\n\n"
	1409	echo " *** compiling the utility programs ..."
	1410	cd ${local_source_path}/../UTIL
[503]	1411
	1412	# TOUCH FILES IN ORDER TO FORCE COMPILATION FOR EVERY BLOCK
	1413	touch *.f90
	1414	make $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options"
[793]	1415
[807]	1416	# CHECK IF QMAKE IS AVAILABLE AND COMPILE MRUNGUI
[811]	1417	if [[ $util_compiled_localhost == false ]]
	1418	then
	1419	printf "\n\n"
	1420	echo " *** compiling the mrun GUI"
	1421	if which qmake >/dev/null; then
	1422	cd mrungui
	1423	touch *
	1424	qmake
	1425	make
	1426	make clean
	1427	rm Makefile
	1428	cd ..
	1429	else
	1430	echo " +++ no qmake found. The (optional) GUI will not be compiled."
	1431	fi
[793]	1432
[811]	1433	# COMPILE CHECK_NAMELIST_FILES (ONLY FOR ONE BRANCH on LOCALHOST NEEDED)
[793]	1434
[811]	1435	printf "\n\n"
	1436	echo " *** compiling check_namelist_files ..."
[807]	1437
[892]	1438	# GET CHECK OPTIONS
	1439	line=""
	1440	found=false
	1441	grep "$remote_host_string" $config_file \| grep "%cpp_options" > $tmp_mbuild
	1442	while read line1
	1443	do
	1444
	1445	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	1446	then
	1447	line="$line1"
	1448	fi
	1449
	1450	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	1451	then
	1452	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING UND ALLE -D ENTFERNEN
	1453	line="$line "
	1454	copts_check=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g' \| sed 's/-D[^ ]* //g' \| sed 's/ -D.*//g'`
	1455	found=true
	1456	fi
	1457
	1458	done < $tmp_mbuild
	1459	copts_check="$copts_check -D__check -D__parallel"
	1460
[811]	1461	check_depository_path=${local_source_path}/../UTIL
	1462	cd $check_depository_path
	1463	mkdir check_tmp
	1464	cp ${local_source_path}/${mainprog}_sources_check.tar ./check_tmp
	1465	cd check_tmp
	1466	tar -xf ${mainprog}_sources_check.tar
	1467	rm -rf ${mainprog}_sources_check.tar
[807]	1468
[892]	1469	make -f Makefile_check $make_options F90=$compiler_name_ser COPT="$copts_check"
[811]	1470	tar -cf check_namelist_files.tar Makefile_check check_namelist_files.x .f90 .o *.mod
	1471	mv check_namelist_files.tar $check_depository_path
	1472	mv check_namelist_files.x $PALM_BIN
	1473	cd $check_depository_path
	1474	rm -rf check_tmp
	1475	util_compiled_localhost=true
	1476	else
	1477	cd $check_depository_path
	1478	printf "\n\n"
[818]	1479	echo " *** skipped compilation of mrun GUI."
[811]	1480	printf "\n\n"
	1481	echo " *** skipped compilation of check_namelist_files."
	1482	fi
	1483
[1]	1484	fi
	1485	fi
	1486	done
	1487
	1488
	1489	if [[ $host_found = false ]]
	1490	then
	1491	if [[ $host = all ]]
	1492	then
	1493	printf "\n +++ no hosts found in configuration file"
	1494	else
	1495	printf "\n +++ host \"$host\" not found in configuration file"
	1496	fi
	1497	locat=config_file; exit
	1498	fi
	1499
	1500
	1501
[503]	1502	# FINAL WORK
[1]	1503	rm -f hosts_found_in_config_file
[811]	1504	rm -f ${local_source_path}/${mainprog}_sources_check.tar
[1]	1505

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |