Home

Context Navigation

source: palm/trunk/SCRIPTS/mbuild @ 676

Last change on this file since 676 was 635, checked in by raasch, 14 years ago
mrun/mbuild/subjob adjustments for new Tsubama system at Tokyo Institute of Techology (lctit)
Property svn:keywords set to `Id Rev`
File size: 47.7 KB

Rev	Line
[1]	1	#!/bin/ksh
[503]	2	# mbuild - script for compiling the PALM code and its utility programs
[169]	3	# $Id: mbuild 635 2010-12-14 13:33:02Z suehring $
[1]	4
[503]	5	# Procedure to compile code on local and remote hosts using the
	6	# make-mechanism. The source code must be provided on the local host.
[1]	7
[503]	8	# Last changes:
	9	# 06/05/02 - Siggi - start development
	10	# 12/06/02 - Siggi - first version finished
	11	# 12/09/02 - Siggi - ibmh (hanni.hlrn.de) included
	12	# 19/12/02 - Siggi - ibmb included
[1]	13	# 05/02/03 - Siggi - hostname nobela included
	14	# 04/03/03 - Siggi - host nech included
	15	# 06/03/03 - Siggi - make_call_string is echoed without '' to
	16	# file LAST_MAKE_CALL (otherwise error on NEC, because
	17	# '' are part of compiler options
	18	# 16/03/03 - Siggi - Two underscores are placed in front of every define
	19	# string, in case that palm.f90 version contains
	20	# such strings
	21	# 16/04/03 - Siggi - First extensions for linux machines
	22	# 24/06/03 - Siggi - host orkan included
	23	# 17/07/03 - Siggi - IP adress set to new "cross" machine at DKRZ
	24	# 24/07/03 - Siggi - host maestro admitted
	25	# 06/08/03 - Siggi - host gregale admitted
	26	# 05/11/03 - Siggi - hosts irifi and quanero are now belonging to lcmuk
	27	# 19/11/03 - Heiko - on lcmuk, mbuild does not tar the *.i files
	28	# 08/01/04 - Siggi - additional preprocessor directive for ibm included
	29	# (-D$OMP=OMP) in order to avoid problems with
	30	# OMP_NUM_THREADS
	31	# 09/01/04 - Siggi - action above cancelled
	32	# 28/01/04 - Siggi - action above re-cancelled
	33	# 08/03/04 - Siggi - host scirocco admitted
	34	# 26/03/04 - Siggi - .o and .mod files are also deleted in depository, if
	35	# the respective .f90 file is not listed in the makefile
	36	# and deletion is demanded by the user
	37	# 12/04/04 - Siggi - scp2 instead of scp used for transfer from decalpha
	38	# due to error in ssh installation (otherwise a prompt
	39	# for the password appears)
	40	# 23/07/04 - Siggi - changes due to the new berni configuration
	41	# (federation switch)
	42	# 08/09/04 - Siggi - hanni IP address changed to 130.75.4.10
	43	# 23/09/04 - Joerg - correction of IP-Address for 'cross' (DKRZ)
	44	# 09/03/05 - Siggi - on nech, mbuild does not tar the *.i files
	45	# 31/03/05 - Siggi - mbuild does not tar *.i files any more
	46	# 24/04/05 - Siggi - netcdf support on lcmuk
	47	# 25/04/05 - Siggi - netcdf support on gfdl3 (decalpha)
	48	# 12/05/05 - Siggi - netcdf support on ibm
	49	# set OBJECT_MODE=64 for compiling on ibmb, ibmh
	50	# 18/05/05 - Siggi - netcdf support on nec
	51	# 19/05/05 - Siggi - IP addres 134.75.155.74 changed to 165.132.26.56
	52	# 23/05/05 - Siggi - netcdf support on ibms
	53	# 01/06/05 - Siggi - reset of cpp_options to "" on lcmuk
	54	# 30/06/05 - Siggi - netcdf support on bora
	55	# 20/10/05 - Siggi - update of netcdf-version on decalpha (gfdl3)
	56	# 04/11/05 - Siggi - netcdf 3.6.0-p1 on ibmh/ibmb
	57	# 30/12/05 - Siggi - change of IP adresses in subnet 130.75.105
	58	# host gfdl5 (ibmy) admitted
	59	# 10/01/06 - Siggi - cpp directive for NetCDF 64bit support
	60	# 20/01/06 - Siggi - cpp directive for ibmy
	61	# 09/02/06 - Marcus- compile only once on lcmuk (as on ibmh/ibmb)
	62	# 10/02/06 - Siggi - modifications for scp on decalpha
	63	# 13/04/06 - Siggi - ostria admitted
	64	# 19/04/06 - Siggi - preprocessor directive -D$OMP=OMP for ibm removed
	65	# 23/05/05 - Siggi - lctit (SUN Fire X4600) admitted
	66	# 29/05/05 - Siggi - atmos (lcide) admitted
	67	# 23/08/06 - Siggi - netcdf support for scirocco (notebook)
	68	# 24/11/06 - Siggi - breva and levanto admitted
	69	# 07/02/07 - Siggi - adapted for RIAM (neck)
[5]	70	# 10/02/07 - Siggi - all hpmuk-related code removed
[40]	71	# 02/03/07 - Siggi - compilation of utility programs and transfer of
[27]	72	# scripts to remote hosts added (option -u)
[66]	73	# 14/03/07 - Siggi - fimm admitted, revision number added to terminal
	74	# output
[69]	75	# 16/03/07 - Siggi - adjustments (netcdf) for lctit
	76	# adjustments for running under pdksh, local ip-addres
	77	# is not determined any more
[82]	78	# 30/03/07 - Siggi - cpp-directives/options + netcdf-options are read
	79	# from configuration file
	80	# host identifier (local_host) is read from config file
[116]	81	# 10/10/07 - Siggi - bugfix: handling of comment lines
[181]	82	# 18/07/08 - Siggi - adapted for lcsgih
	83	# 21/07/08 - Siggi - mainprog (executable) is added to the tar-file
	84	# ({mainprog}_current_version)
[206]	85	# 02/10/08 - Siggi - adapted for lcxt4
[215]	86	# 14/11/08 - Siggi - update mechanism completely revised: source tarfile
	87	# remains in source directory, one depository per block
[266]	88	# (given in the config-file) is created, allways all
	89	# files from the source directory are copied to the
	90	# respective depository, no additional file checks are
	91	# done any more (version 2.1)
[224]	92	# 13/01/09 - Marcus- re-enable compilation more than once on lcmuk (as on
	93	# other machines)
[266]	94	# 21/03/09 - Siggi - -u copies also copies process_dvr_output and
	95	# .dvrserver.config
[305]	96	# 21/04/09 - Siggi - adjustments for new IBM at DKRZ, which is now ibmh
[367]	97	# 25/08/09 - BjornM- adapted for lck
[407]	98	# 01/12/09 - BjornM- re-adjustments for lcxt4
[437]	99	# 01/02/10 - Siggi - adjustments for lcxt5m
[475]	100	# 03/02/10 - Siggi - make options (mopts) to be set by configuration file
	101	# implemented, remoted mode option -r completely
	102	# removed, t3e related parts removed
[492]	103	# 26/02/10 - BjornM- re-adjustments for lcxt4 (new modules)
[493]	104	# 01/03/10 - Siggi - mpilib replaced by modules: explicit module settings
	105	# removed; modules should now be given in the
	106	# configuration file
[503]	107	# 02/03/10 - Siggi - utility programs are created separately for each
	108	# block in the configuration file,
	109	# parallel make for utility programs
[508]	110	# 12/03/10 - Siggi - bugfix: remode_md was given a wrong value
[544]	111	# 16/08/10 - BjornM- bugfix: call of modules on local host, new workaround
	112	# for lcxt4
[555]	113	# 07/09/10 - Siggi - bugfix for wrong netcdf/3.6.3 module on lcsgi
[622]	114	# 08/12/10 - Siggi - initialization of the module command changed for
	115	# SGI-ICE/lcsgi
	116	# adjustments for Kyushu Univ. (lcrte, ibmku)
[635]	117	# 14/12/10 - Siggi - adjustments for new Tsubame system at Tokyo
	118	# institute of technology (lctit)
[1]	119
	120
[508]	121
[503]	122	# VARIABLE DECLARATIONS + DEFAULT VALUES
[22]	123	compile_utility_programs=false
[1]	124	config_file=.mrun.config
[67]	125	fimm=false
[1]	126	host=all
	127	host_found=false
	128	locat=normal
	129	makefile=""
[493]	130	module_calls=""
[1]	131	scirocco=false
	132	silent=false
	133	suf=f90
	134	update=false
[83]	135	working_directory=`pwd`
[1]	136
	137	typeset -i ih ihost=0
	138
[66]	139	typeset -R30 calltime
[1]	140	typeset -L20 column1
	141	typeset -L50 column2
	142	typeset -L70 column3
[215]	143	typeset -L40 version="MBUILD 2.1 Rev$Rev: 635 $"
[1]	144
[503]	145	# ERROR HANDLING
	146	# IN CASE OF EXIT:
[83]	147	trap 'rm -rf $working_directory/tmp_mbuild
[69]	148	if [[ $locat != normal ]]
[1]	149	then
	150	printf "\n\n +++ mbuild killed \n\n"
	151	else
	152	printf "\n\n *** mbuild finished \n\n"
	153	fi' exit
	154
	155
[503]	156	# IN CASE OF TERMINAL-BREAK:
[83]	157	trap 'rm -rf $working_directory/tmp_mbuild
[69]	158	printf "\n\n +++ mbuild killed by \"^C\" \n\n"
[1]	159	exit
	160	' 2
	161
	162
[215]	163	tmp_mbuild=${working_directory}/tmp_mbuild
[1]	164
[503]	165	# READ SHELLSCRIPT-OPTIONS
[475]	166	while getopts :c:h:m:s:u option
[1]	167	do
	168	case $option in
	169	(c) config_file=$OPTARG;;
	170	(h) host=$OPTARG;;
	171	(m) makefile=$OPTARG;;
	172	(s) suf=$OPTARG;;
[22]	173	(u) compile_utility_programs=true;;
[1]	174	(\?) printf "\n +++ unknown option $OPTARG \n";
	175	locat=parameter; exit;;
	176	esac
	177	done
	178
	179
	180
[503]	181	# CHECK, IF CONFIGURATION-FILE EXISTS
[82]	182	if [[ ! -f $config_file ]]
	183	then
	184	printf "\n +++ configuration file: "
	185	printf "\n $config_file"
	186	printf "\n does not exist"
	187	locat=configuration; exit
	188	fi
	189
	190
	191
[503]	192	# DETERMINE THE LOCAL HOST
[1]	193	local_host_real_name=$(hostname)
[69]	194	# local_addres=$(nslookup `hostname` 2>&1 \| grep "Address:" \| tail -1 \| awk '{print $2}')
	195
[1]	196
[82]	197
[503]	198	# DETERMINE HOST-IDENTIFIER (local_host) FROM THE CONFIG-FILE
[82]	199	line=""
[215]	200	grep "%host_identifier" $config_file > $tmp_mbuild
[82]	201	while read line
	202	do
[116]	203	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
[82]	204	then
	205	HOSTNAME=`echo $line \| cut -d" " -s -f2`
	206	host_identifier=`echo $line \| cut -d" " -s -f3`
[83]	207	if [[ $local_host_real_name = $HOSTNAME ]]
[82]	208	then
	209	local_host=$host_identifier
	210	break
	211	fi
	212	fi
[215]	213	done < $tmp_mbuild
[82]	214
	215	if [[ "$local_host" = "" ]]
	216	then
	217	printf "\n +++ no host identifier found in configuration file \"$config_file\""
	218	printf "\n for local host \"$local_host_real_name\"."
	219	printf "\n Please add line"
	220	printf "\n \"\%host_identifier $local_host_real_name <identifier>\""
	221	printf "\n to the configuration file."
	222	locat=local_host; exit
	223	fi
	224
	225
	226
[1]	227	[[ $local_host_real_name = scirocco ]] && scirocco=true
[67]	228	[[ $local_host_real_name = fimm.bccs.uib.no ]] && fimm=true
[1]	229
	230
	231
	232	if [[ $local_host != ibms ]]
	233	then
	234	config_file=$PWD/$config_file
	235	else
	236	config_file=`pwd`/$config_file
	237	fi
	238
	239
	240
[503]	241	# DETERMINE USER NAME ON LOCAL HOST FROM THE CONFIG-FILE
[1]	242	line=""
[215]	243	grep " $local_host" $config_file \| grep "%remote_username" > $tmp_mbuild
[69]	244	while read line
[1]	245	do
[116]	246	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
[1]	247	then
	248	local_username=`echo $line \| cut -d" " -s -f2`
	249	fi
[215]	250	done < $tmp_mbuild
[1]	251
[82]	252
[1]	253	if [[ "$local_username" = "" ]]
	254	then
	255	printf "\n +++ no user name found in configuration file"
	256	printf "\n for local host \"$local_host\" "
	257	locat=config_file; exit
	258	fi
	259
	260
[503]	261	# DETERMINE LOCAL SOURCE-CODE PATH.
	262	# FIRST CHECK, IF A GLOBAL SOURCE-CODE PATH HAS BEEN DECLARED FOR ALL HOSTS.
	263	# THEREFORE, FIRST SET ALL GLOBAL VARIABLES DECLARED IN THE CONFIG-FILE,
	264	# BECAUSE THEY MAY BE USED AS PART OF THE PATH NAME.
[5]	265	line=""
[215]	266	grep "%" $config_file > $tmp_mbuild
[69]	267	while read line
[5]	268	do
[116]	269	if [[ "$line" != "" && "$(echo $line \| cut -d" " -s -f3)" = "" && $(echo $line \| cut -c1) != "#" ]]
[1]	270	then
[5]	271	var=`echo $line \| cut -d" " -s -f1 \| cut -c2-`
	272	value=`echo $line \| cut -d" " -s -f2`
[8]	273	eval export $var=\$value
[1]	274	fi
[215]	275	done < $tmp_mbuild
[1]	276
[503]	277	# NOW CHECK, IF A GLOBAL SOURCE-CODE-PATH HAS BEEN DECLARED
[1]	278	line=""
[215]	279	grep "%source_path" $config_file > $tmp_mbuild
[69]	280	while read line
[1]	281	do
	282	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	283	then
	284	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
	285	then
	286	global_source_path=`echo $line \| cut -d" " -s -f2`
	287	fi
	288	fi
[215]	289	done < $tmp_mbuild
[1]	290
	291	line=""
[215]	292	grep " $local_host" $config_file \| grep "%source_path" > $tmp_mbuild
[69]	293	while read line
[1]	294	do
	295	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	296	then
	297	local_source_path=`echo $line \| cut -d" " -s -f2`
	298	fi
[215]	299	done < $tmp_mbuild
[1]	300
	301	if [[ "$local_source_path" = "" ]]
	302	then
	303	if [[ "$global_source_path" != "" ]]
	304	then
	305	local_source_path=$global_source_path
	306	else
	307	printf "\n +++ no source path found in configuration file"
	308	printf "\n for local host \"$local_host\" "
	309	printf "\n please set \"\%source_path\" in configuration file"
	310	locat=config_file; exit
	311	fi
	312	fi
	313	eval local_source_path=$local_source_path
[8]	314	eval local_source_path=$local_source_path
[1]	315
	316
[215]	317
[503]	318	# DETERMINE GLOBAL DEPOSITORY-PATH
[1]	319	line=""
[215]	320	grep "%depository_path" $config_file > $tmp_mbuild
[69]	321	while read line
[1]	322	do
	323	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	324	then
	325	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
	326	then
	327	global_depository_path=`echo $line \| cut -d" " -s -f2`
	328	fi
	329	fi
[215]	330	done < $tmp_mbuild
[1]	331
	332
	333
[503]	334	# CHECK, IF A MAIN PROGRAM HAS BEEN DEFINED IN THE CONFIG-FILE
[5]	335	if [[ $(grep -c "%mainprog" $config_file) != 1 ]]
	336	then
	337	printf "\n +++ no main program or more than one main program defined"
	338	printf "\n in configuration file"
	339	locat=configuration; exit
	340	else
	341	line=`grep "%mainprog" $config_file`
	342	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
	343	then
	344	printf "\n +++ no main program defined in configuration file"
	345	locat=configuration; exit
	346	fi
	347	mainprog=`echo $line \| cut -d" " -s -f2 \| cut -d"." -f1`
	348	fi
	349
	350
	351
[503]	352	# CHECK IF MAKEFILE EXITS
[1]	353	[[ "$makefile" = "" ]] && makefile=$local_source_path/Makefile
	354	if [[ ! -f $makefile ]]
	355	then
	356	printf "\n +++ makefile: "
	357	printf "\n $makefile"
	358	printf "\n does not exist"
	359	locat=makefile; exit
	360	fi
	361
	362
[503]	363	# HEADER-OUTPUT (PART1: MESSAGES CONCERNING THE LOCAL HOST)
[1]	364	calltime=$(date)
	365	printf "\n"
	366	printf "#------------------------------------------------------------------------# \n"
	367	printf "\| $version$calltime \| \n"
	368	printf "\| \| \n"
	369	column1="called on:"; column2=$local_host_real_name
	370	printf "\| $column1$column2 \| \n"
	371	column1="local username:"; column2=$local_username
	372	printf "\| $column1$column2 \| \n"
	373	column1="local IP-addres:"; column2=$local_addres
	374	printf "\| $column1$column2 \| \n"
	375	column1="config file:"; column2=$config_file
	376	printf "\| $column1$column2 \| \n"
	377	column1="makefile:"; column2=$makefile
	378	printf "\| $column1$column2 \| \n"
	379	column1="local source path:"; column2=$local_source_path
	380	printf "\| $column1$column2 \| \n"
	381	printf "#------------------------------------------------------------------------# \n"
	382
	383	# printf "\| \| \n"
	384
	385
[40]	386	if [[ $compile_utility_programs = false ]]
	387	then
[1]	388
[503]	389	# IN ANY CASE, GIVE ALL FILES WRITE-PERMIT, IN ORDER TO AVOID PROBLEMS
	390	# WITH OVERWRITING FILES ON THE REMOTE HOST
[215]	391	cd $local_source_path
	392	printf "\n\n *** tar of makefile and source files in $local_source_path"
[40]	393	tar -cf ${mainprog}_sources.tar Makefile *.$suf
	394	printf "\n"
[1]	395
[40]	396	fi
[1]	397
	398
[40]	399
[503]	400	# GET CONFIRMATION TO CONTINUE
[1]	401	if [[ $host = all ]]
	402	then
	403	printf "\n *** updates will be made for ALL hosts found in"
	404	printf "\n the configuration file"
	405	else
	406	printf "\n *** update will be made for host \"$host\" "
	407	fi
	408
	409	if [[ $silent = false ]]
	410	then
	411	answer=dummy
	412	printf "\n\n"
	413	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
	414	do
	415	printf " >>> continue (y/n) ? "
	416	read answer
	417	done
	418	if [[ $answer = n \|\| $answer = N ]]
	419	then
	420	locat=user_abort; exit
	421	fi
	422	fi
	423
	424
	425
	426
	427	# GENERIERUNG DER AKTUELLEN MODELLVERSION FUER ALLE RECHNER-/UEBERSETZUNGS-
	428	# VERSIONEN, DIE IN DER KONFIGURATIONSDATEI GEFUNDEN WERDEN
	429	printf "\n *** scanning configuration file for host(s) ..."
	430
[215]	431	grep %fopts $config_file > $tmp_mbuild
[69]	432	while read line
[1]	433	do
	434	# KOMMENTARZEILEN UEBERSPRINGEN
	435	[[ $(echo $line \| cut -c1) = "#" ]] && continue
	436	(( ihost = ihost + 1 ))
	437	hostline[$ihost]="$line"
[215]	438	done < $tmp_mbuild
[1]	439
	440
	441	while (( ih < ihost ))
	442	do
	443
	444	(( ih = ih + 1 ))
	445
	446	# REMOTE-RECHNER UND UEBERSETZUNGS-VERSION FESTSTELLEN
	447	# NUR WEITERMACHEN, WENN ENTSPRECHENDER REMOTE-RECHNER MITTELS
	448	# SHELLSCRIPT-OPTION AUCH AUSGEWAEHLT WURDE
	449	remote_host_string=`echo ${hostline[$ih]} \| cut -d" " -s -f3-`
	450	remote_host=`echo $remote_host_string \| cut -d" " -f1`
	451	if [[ $host != all ]]
	452	then
	453	[[ $remote_host != $host ]] && continue
	454	fi
	455	host_found=true
	456	condition1=`echo $remote_host_string \| cut -d" " -s -f2`
	457	if [[ $condition1 = $remote_host ]]
	458	then
	459	condition1=""
	460	else
	461	condition2=`echo $remote_host_string \| cut -d" " -s -f3`
	462	fi
	463
[493]	464	modules=""
[82]	465	netcdf_inc=""
	466	netcdf_lib=""
[1]	467
	468	# IP-ADRESSE DES REMOTE-RECHNERS BESTIMMEN
	469	case $remote_host in
[116]	470	(lcmuk) remote_addres=130.75.105.2;;
[622]	471	(lcrte) remote_addres=133.5.185.60;;
[181]	472	(lcsgib) remote_addres=130.73.232.102;;
[346]	473	(lcsgih) remote_addres=130.75.4.102;;
[367]	474	(lck) remote_addres=165.132.26.61;;
[635]	475	(lctit) remote_addres=10.1.6.170;;
[206]	476	(lcxt4) remote_addres=129.177.20.113;;
[437]	477	(lcxt5m) remote_addres=193.166.211.144;;
[83]	478	(decalpha) remote_addres=165.132.26.56;;
[305]	479	(ibmh) remote_addres=136.172.40.15;;
[622]	480	(ibmku) remote_addres=133.5.4.129;;
[83]	481	(ibms) remote_addres=150.183.5.101;;
	482	(ibmy) remote_addres=165.132.26.58;;
	483	(nech) remote_addres=136.172.44.192;;
	484	(neck) remote_addres=133.5.178.11;;
	485	(ground.yonsei.ac.kr) remote_addres=134.75.155.33;;
	486	(*) if [[ $local_host != $remote_host ]]
[1]	487	then
[83]	488	printf "\n +++ remote host \"$remote_host\" unknown";
[503]	489	printf "\n please inform PALM group support!"
[1]	490	fi;;
	491	esac
	492
	493
	494	# REMOTE-USERNAMEN ERMITTELN
	495	line=""
[116]	496	found=false
[215]	497	grep "$remote_host_string" $config_file \| grep "%remote_username" > $tmp_mbuild
[69]	498	while read line1
[1]	499	do
[116]	500
[1]	501	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	502	then
	503	line="$line1"
	504	fi
[116]	505
	506	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	507	then
	508	remote_username=`echo $line \| cut -d" " -s -f2`
	509	found=true
	510	fi
	511
[215]	512	done < $tmp_mbuild
[1]	513
[116]	514	if [[ $found = false ]]
[1]	515	then
	516	printf "\n +++ no remote username found in configuration file"
	517	printf "\n for \"$remote_host_string\" "
	518	locat=config_file; exit
	519	fi
	520
	521
	522	# REMOTE-QUELLTEXTPFAD ERMITTELN
	523	line=""
[54]	524	remote_source_path=""
[215]	525	grep "$remote_host_string" $config_file \| grep "%source_path" > $tmp_mbuild
[69]	526	while read line1
[1]	527	do
[116]	528
[1]	529	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	530	then
	531	line="$line1"
	532	fi
[116]	533
	534	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	535	then
	536	remote_source_path=`echo $line \| cut -d" " -s -f2`
	537	fi
	538
[215]	539	done < $tmp_mbuild
[1]	540
	541	if [[ "$remote_source_path" = "" ]]
	542	then
	543	if [[ "$global_source_path" != "" ]]
	544	then
	545	remote_source_path=$global_source_path
	546	else
	547	printf "\n +++ no source path found in configuration file"
	548	printf "\n for \"$remote_host_string\" "
	549	locat=config_file; exit
	550	fi
	551	fi
	552
[22]	553	remote_ud=${remote_source_path}/../UTIL
[24]	554	remote_ud=$(eval echo $remote_ud)
[1]	555
[54]	556
[1]	557	# REMOTE-PFAD FUER MAKE-DEPOSITORY ERMITTELN
[54]	558	remote_md=""
[1]	559	line=""
[215]	560	grep "$remote_host_string" $config_file \| grep "%depository_path" > $tmp_mbuild
[69]	561	while read line1
[1]	562	do
[116]	563
[1]	564	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	565	then
	566	line="$line1"
	567	fi
[116]	568
	569	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	570	then
	571	remote_md=`echo $line \| cut -d" " -s -f2`
	572	fi
	573
[215]	574	done < $tmp_mbuild
[1]	575
	576	if [[ "$remote_md" = "" ]]
	577	then
	578	if [[ "$global_depository_path" != "" ]]
	579	then
	580	remote_md=$global_depository_path
	581	else
	582	printf "\n +++ no depository path found in configuration file"
	583	printf "\n for \"$remote_host_string\" "
	584	printf "\n please set \"\%depository_path\" in configuration file"
	585	locat=config_file; exit
	586	fi
	587	fi
	588
[8]	589	remote_md=$(eval echo $remote_md)
[503]	590	block=""
	591	[[ "$condition1" != "" ]] && block=_$condition1
	592	[[ "$condition2" != "" ]] && block=${block}_$condition2
[508]	593	remote_md=${remote_md}$block
[1]	594
[8]	595
[1]	596	# COMPILERNAMEN ERMITTELN
	597	line=""
[116]	598	found=false
[215]	599	grep "$remote_host_string" $config_file \| grep "%compiler_name " > $tmp_mbuild
[69]	600	while read line1
[1]	601	do
[116]	602
[1]	603	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	604	then
	605	line="$line1"
	606	fi
[116]	607
	608	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	609	then
	610	compiler_name=`echo $line \| cut -d" " -s -f2`
	611	found=true
	612	fi
	613
[215]	614	done < $tmp_mbuild
[1]	615
[116]	616	if [[ $found = false ]]
[1]	617	then
	618	printf "\n +++ no compiler name found in configuration file"
	619	printf "\n for \"$remote_host_string\" "
	620	locat=config_file; exit
	621	fi
	622
	623
[27]	624	# BEI BENUTZUNG EINES PARALLELEN COMPILERS MUSS AUCH EIN
	625	# SERIELLER COMPILERNAME ERMITTELT WERDEN
	626	if [[ $(echo $remote_host_string \| grep -c parallel) = 1 ]]
	627	then
	628	line=""
[116]	629	found=false
[215]	630	grep "$remote_host_string" $config_file \| grep "%compiler_name_ser" > $tmp_mbuild
[69]	631	while read line1
[27]	632	do
[116]	633
[27]	634	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	635	then
	636	line="$line1"
	637	fi
[116]	638
	639	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	640	then
	641	compiler_name_ser=`echo $line \| cut -d" " -s -f2`
	642	found=true
	643	fi
	644
[215]	645	done < $tmp_mbuild
[1]	646
[116]	647	if [[ $found = false ]]
[27]	648	then
[28]	649	printf "\n +++ no serial compiler name found in configuration file"
[27]	650	printf "\n for \"$remote_host_string\" "
	651	locat=config_file; exit
	652	fi
	653	else
	654	compiler_name_ser=$compiler_name
	655	fi
	656
	657
	658
[82]	659	# PRAEPROZESSOR-OPTIONEN/DIREKTIVEN ERMITTELN
	660	line=""
[116]	661	found=false
[215]	662	grep "$remote_host_string" $config_file \| grep "%cpp_options" > $tmp_mbuild
[82]	663	while read line1
	664	do
[116]	665
[82]	666	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	667	then
	668	line="$line1"
	669	fi
[116]	670
	671	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	672	then
	673	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
	674	cpp_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	675	found=true
	676	fi
	677
[215]	678	done < $tmp_mbuild
[116]	679
	680	if [[ $found = false ]]
[82]	681	then
	682	printf "\n +++ no preprocessor options found in configuration file"
	683	printf "\n for \"$remote_host_string\" "
	684	locat=config_file; exit
	685	fi
	686
[116]	687
[82]	688	# RECHNERSPEZIFISCHE CPP-DIREKTIVEN HINZUFUEGEN
	689	for string in $remote_host_string
	690	do
	691	if [[ $(echo $remote_host \| cut -c1-2) = lc && $(echo $string \| cut -c1-2) = lc ]]
	692	then
	693	cpp_options="$cpp_options -D__lc "
[83]	694	elif [[ $(echo $remote_host \| cut -c1-3) = ibm && $(echo $string \| cut -c1-3) = ibm ]]
	695	then
	696	cpp_options="${cpp_options},-D__ibm"
	697	elif [[ $(echo $remote_host \| cut -c1-3) = nec && $(echo $string \| cut -c1-3) = nec ]]
	698	then
	699	cpp_options="${cpp_options} -D__nec"
[82]	700	else
[83]	701	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
	702	then
	703	cpp_options="${cpp_options},-D__$string"
	704	else
	705	cpp_options="$cpp_options -D__$string "
	706	fi
[82]	707	fi
	708	done
	709
	710
	711
	712	# NETCDF-OPTIONEN ERMITTELN
	713	line=""
[215]	714	grep "$remote_host_string" $config_file \| grep "%netcdf_inc" > $tmp_mbuild
[82]	715	while read line1
	716	do
[116]	717
[82]	718	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	719	then
	720	line="$line1"
	721	fi
[116]	722
	723	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	724	then
	725	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
	726	netcdf_inc=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	727	fi
	728
[215]	729	done < $tmp_mbuild
[82]	730
	731	line=""
[215]	732	grep "$remote_host_string" $config_file \| grep "%netcdf_lib" > $tmp_mbuild
[82]	733	while read line1
	734	do
[116]	735
[82]	736	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	737	then
	738	line="$line1"
	739	fi
[116]	740
	741	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	742	then
	743	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
	744	netcdf_lib=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	745	fi
	746
[215]	747	done < $tmp_mbuild
[82]	748
	749
	750
[475]	751	# get make options
	752	line=""
	753	found=false
	754	grep "$remote_host_string" $config_file \| grep "%mopts" > $tmp_mbuild
	755	while read line1
	756	do
	757
	758	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	759	then
	760	line="$line1"
	761	fi
	762
	763	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	764	then
	765	# remove colons from directive string
	766	make_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	767
	768	fi
	769
	770	done < $tmp_mbuild
	771
	772
	773
[1]	774	# COMPILEROPTIONEN ERMITTELN
	775	line=""
[116]	776	found=false
[215]	777	grep "$remote_host_string" $config_file \| grep "%fopts" > $tmp_mbuild
[69]	778	while read line1
[1]	779	do
[116]	780
[1]	781	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	782	then
	783	line="$line1"
	784	fi
[116]	785
	786	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	787	then
	788	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
	789	compiler_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	790	found=true
	791
	792	# NETCDF-INCLUDEVERZEICHNIS HINZUFUEGEN
	793	compiler_options="$compiler_options $netcdf_inc"
	794	fi
	795
[215]	796	done < $tmp_mbuild
[116]	797
	798	if [[ $found = false ]]
[1]	799	then
	800	printf "\n +++ no compiler options found in configuration file"
	801	printf "\n for \"$remote_host_string\" "
	802	locat=config_file; exit
	803	fi
[82]	804
[1]	805
	806
[503]	807	# get modules to be loaded
[221]	808	line=""
[493]	809	grep "$remote_host_string" $config_file \| grep "%modules" > $tmp_mbuild
[221]	810	while read line1
	811	do
	812
	813	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	814	then
	815	line="$line1"
	816	fi
	817
	818	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	819	then
	820	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
[493]	821	modules=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
[221]	822	fi
	823
	824	done < $tmp_mbuild
	825
	826
	827
	828
[1]	829	# LADER-OPTIONEN ERMITTELN
	830	line=""
[116]	831	found=false
[215]	832	grep "$remote_host_string" $config_file \| grep "%lopts" > $tmp_mbuild
[69]	833	while read line1
[1]	834	do
[116]	835
[1]	836	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	837	then
	838	line="$line1"
	839	fi
[116]	840
	841	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	842	then
	843	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
	844	loader_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	845	found=true
	846
	847	# NETCDF-LIBRARY HINZUFUEGEN
	848	loader_options="$loader_options $netcdf_lib"
	849	fi
	850
[215]	851	done < $tmp_mbuild
[1]	852
[116]	853	if [[ $found = false ]]
[1]	854	then
	855	printf "\n +++ no loader options found in configuration file"
	856	printf "\n for \"$remote_host_string\" "
	857	locat=config_file; exit
	858	fi
[82]	859
[1]	860
	861	printf "\n\n#------------------------------------------------------------------------# \n"
	862	if [[ $remote_host = $local_host ]]
	863	then
	864	column1="remote_host:"; column2="$remote_host (= local host!)"
	865	else
	866	column1="remote_host:"; column2=$remote_host
	867	fi
	868	printf "\| $column1$column2 \| \n"
	869	printf "\| \| \n"
	870	column1="conditions:"; column2="$condition1 $condition2"
	871	printf "\| $column1$column2 \| \n"
	872	column1="make depository:"; column2=$remote_md
	873	printf "\| $column1$column2 \| \n"
[215]	874	line=$(echo "$remote_md" \| cut -c51-)
	875	while [[ "$line" != "" ]]
	876	do
	877	column1=""
	878	column2=$line
	879	printf "\| $column1$column2 \| \n"
	880	line=$(echo "$line" \| cut -c51-)
	881	done
[25]	882	if [[ $compile_utility_programs = true ]]
	883	then
	884	column1="utility directory:"; column2=$remote_ud
	885	printf "\| $column1$column2 \| \n"
	886	fi
[1]	887	column1="username:"; column2=$remote_username
	888	printf "\| $column1$column2 \| \n"
	889	column1="addres:"; column2=$remote_addres
	890	printf "\| $column1$column2 \| \n"
	891	column1="compiler:"; column2=$compiler_name
	892	printf "\| $column1$column2 \| \n"
[28]	893	if [[ $compile_utility_programs = true ]]
	894	then
	895	column1="serial compiler:"; column2=$compiler_name_ser
	896	printf "\| $column1$column2 \| \n"
	897	fi
[475]	898	if [[ "$make_options" != "" ]]
	899	then
	900	column1="make options:"; column2=$make_options
	901	printf "\| $column1$column2 \| \n"
	902	fi
[1]	903	column1="cpp options:"; column2=$cpp_options
	904	printf "\| $column1$column2 \| \n"
	905	line=$(echo "$cpp_options" \| cut -c51-)
	906	while [[ "$line" != "" ]]
	907	do
	908	column1=""
	909	column2=$line
	910	printf "\| $column1$column2 \| \n"
	911	line=$(echo "$line" \| cut -c51-)
	912	done
	913	column1="compiler options:"; column2=$compiler_options
	914	printf "\| $column1$column2 \| \n"
	915	line=$(echo "$compiler_options" \| cut -c51-)
	916	while [[ "$line" != "" ]]
	917	do
	918	column1=""
	919	column2=$line
	920	printf "\| $column1$column2 \| \n"
	921	line=$(echo "$line" \| cut -c51-)
	922	done
	923	column1="loader options:"; column2=$loader_options
	924	printf "\| $column1$column2 \| \n"
	925	line=$(echo "$loader_options" \| cut -c51-)
	926	while [[ "$line" != "" ]]
	927	do
	928	column1=""
	929	column2=$line
	930	printf "\| $column1$column2 \| \n"
	931	line=$(echo "$line" \| cut -c51-)
	932	done
[493]	933	if [[ $modules != "" ]]
	934	then
	935	column1="modules to be load:"; column2=$modules
	936	printf "\| $column1$column2 \| \n"
	937	line=$(echo "$modules" \| cut -c51-)
	938	while [[ "$line" != "" ]]
	939	do
	940	column1=""
	941	column2=$line
	942	printf "\| $column1$column2 \| \n"
	943	line=$(echo "$line" \| cut -c51-)
	944	done
	945	fi
[1]	946	printf "#------------------------------------------------------------------------# \n"
	947
	948	if [[ $silent = false ]]
	949	then
	950	answer=dummy
	951	printf "\n\n"
	952	while [[ "$answer" != y && "$answer" != Y && "$answer" != c && "$answer" != C && "$answer" != s && "$answer" != S && "$answer" != a && "$answer" != A ]]
	953	do
	954	printf " >>> continue (y(es)/c(ontinue)/a(bort)/s(skip)) ? "
	955	read answer
	956	done
	957	if [[ $answer = a \|\| $answer = A ]]
	958	then
	959	locat=user_abort; exit
	960	fi
	961	if [[ $answer = c \|\| $answer = C ]]
	962	then
[503]	963	silent=true
[1]	964	fi
	965	if [[ $answer = s \|\| $answer = S ]]
	966	then
	967	continue
	968	fi
	969	fi
	970
	971
[475]	972	# make on remote host
	973	if [[ $remote_host != $local_host ]]
[1]	974	then
	975
[475]	976	if [[ $compile_utility_programs = false ]]
[1]	977	then
	978
[475]	979	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
	980	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
	981	echo " *** copying \"${mainprog}_sources.tar\" to \"${remote_addres}:${remote_md}/\" "
	982	if [[ $remote_host != lctit ]]
	983	then
	984	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})"
	985	else
	986	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
	987	# MIT SSH, DESHALB AUFRUF PER PIPE
	988	print "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})" \| ssh ${remote_username}@${remote_addres} 2>&1
	989	fi
	990	if [[ $local_host = decalpha ]]
	991	then
	992	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
	993	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
	994	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
	995	remote_md=`echo $remote_md \| sed 's/\$HOME\///'`
	996	/bin/scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
	997	else
	998	scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
	999	fi
[1]	1000
	1001
	1002
[475]	1003	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
	1004	echo " *** untar previous update on remote host, if existing"
	1005	if [[ $remote_host != lctit ]]
	1006	then
	1007	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar"
	1008	else
	1009	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
	1010	# MIT SSH, DESHALB AUFRUF PER PIPE
	1011	print "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
	1012	fi
[1]	1013
	1014
[475]	1015	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
	1016	echo " *** untar actual sources on remote host"
	1017	if [[ $remote_host != lctit ]]
	1018	then
	1019	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; tar -xf ${mainprog}_sources.tar"
	1020	else
	1021	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
	1022	# MIT SSH, DESHALB AUFRUF PER PIPE
	1023	print "cd ${remote_md}; tar -xf ${mainprog}_sources.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
	1024	fi
[1]	1025
	1026
[475]	1027	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
	1028	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
	1029	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
	1030	# Z.B. DIE PFADE ZUM COMPILER)
	1031	echo " *** execute \"make\" on remote host"
[1]	1032
[493]	1033
	1034	# generate make call with make options
[475]	1035	if [[ $remote_host = nech ]]
	1036	then
	1037	make_call_string="sxmake $make_options PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
	1038	else
	1039	make_call_string="make $make_options PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
	1040	fi
[1]	1041
[493]	1042	# generate command to load modules, if modules are given
	1043	if [[ "$modules" != "" ]]
	1044	then
	1045	module_calls="module load ${modules};"
[555]	1046
	1047	# bugfix for wrong netcdf module
	1048	if [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
	1049	then
	1050	if [[ $(echo $module_calls \| grep -c netcdf/3.6.3-intel) != 0 ]]
	1051	then
	1052	module_calls="$module_calls export LD_LIBRARY_PATH=/sw/dataformats/netcdf/3.6.3-intel/lib:\$LD_LIBRARY_PATH;"
	1053	fi
	1054	fi
[503]	1055	else
	1056	module_calls=""
[493]	1057	fi
	1058
[475]	1059	if [[ $remote_host = ibms \|\| $remote_host = ibmy ]]
	1060	then
[1]	1061
[493]	1062	ssh ${remote_username}@${remote_addres} "$module_calls cd ${remote_md}; echo '$make_call_string' > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1063
[475]	1064	elif [[ $remote_host = ibmh ]]
	1065	then
[1]	1066
[493]	1067	print "$module_calls export OBJECT_MODE=64; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1068
[475]	1069	elif [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
	1070	then
[1]	1071
[622]	1072	# print ". /usr/share/modules/init/bash; $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
	1073	print "eval \`/sw/swdist/bin/modulesinit\`; $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1074
[475]	1075	elif [[ $remote_host = lctit ]]
	1076	then
[1]	1077
[475]	1078	echo " " > ${remote_host}_last_make_protokoll
	1079	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
	1080	do
	1081	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
	1082	done
[1]	1083
[475]	1084	elif [[ $remote_host = lcxt4 ]]
[1]	1085	then
	1086
[493]	1087	print ". /opt/modules/default/init/ksh; $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1088
[475]	1089	else
[1]	1090
[493]	1091	print "cd $module_calls ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1092
[475]	1093	fi
[1]	1094
[475]	1095	if [[ $(grep -c MAKE_ERROR ${remote_host}_last_make_protokoll) != 0 ]]
	1096	then
	1097	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
	1098	if [[ $silent = false ]]
[40]	1099	then
[475]	1100	answer=dummy
	1101	printf "\n"
	1102	while [[ "$answer" != c && "$answer" != k ]]
[40]	1103	do
[475]	1104	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
	1105	read answer
	1106	if [[ "$answer" = l ]]
	1107	then
	1108	more ${remote_host}_last_make_protokoll
	1109	fi
[40]	1110	done
[475]	1111	if [[ $answer = k ]]
[40]	1112	then
[475]	1113	locat=user_abort; exit
[1]	1114	fi
	1115	fi
[475]	1116	fi
[1]	1117
	1118
	1119
[475]	1120	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
	1121	printf "\n *** tar update on remote host ..."
	1122	if [[ $remote_host != lctit ]]
	1123	then
	1124	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod"
	1125	else
	1126	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
	1127	# MIT SSH, DESHALB AUFRUF PER PIPE
	1128	print "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod" \| ssh ${remote_username}@${remote_addres} 2>&1
	1129	fi
[1]	1130
	1131
[475]	1132	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
	1133	# printf "\n *** \"make clean\" on remote host ..."
	1134	# ssh ${remote_username}@${remote_addres} "cd ${remote_md}; make clean; rm ${mainprog}_sources.tar; rm *.f90 Makefile"
	1135	# printf "\n"
[1]	1136
	1137
[25]	1138
	1139
[475]	1140	# GLEICHE AKTIONEN FUER DIE UTILITY-PROGRAMME DURCHFUEHREN
	1141	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
	1142	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
	1143	elif [[ $compile_utility_programs = true ]]
	1144	then
	1145
	1146	printf "\n\n"
	1147	echo " *** copying scripts and utility programs to \"${remote_addres}:${remote_ud}/\" "
	1148	cd ${local_source_path}/../SCRIPTS
	1149
	1150	if [[ $remote_host != lctit ]]
[22]	1151	then
[475]	1152	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)"
	1153	else
[503]	1154	# TIT ERLAUBT NUR DIE AUSFUEHRUNG GANZ BESTIMMTER KOMMANDOS
[475]	1155	# MIT SSH, DESHALB AUFRUF PER PIPE
	1156	print "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)" \| ssh ${remote_username}@${remote_addres} 2>&1
	1157	fi
[22]	1158
[475]	1159	# KOPIEREN DER SCRIPTE
	1160	if [[ $local_host = decalpha ]]
	1161	then
[503]	1162	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTAENDIGEN PFADES
[475]	1163	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
	1164	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
	1165	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
	1166	/bin/scp batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
	1167	else
	1168	scp batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
	1169	fi
[22]	1170
[475]	1171	cd - > /dev/null
	1172	cd ${local_source_path}/../UTIL
[22]	1173
[27]	1174
[475]	1175	# KOPIEREN DER UTILITY-PROGRAMME
	1176	if [[ $local_host = decalpha ]]
	1177	then
	1178	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
	1179	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
	1180	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
	1181	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
	1182	/bin/scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
	1183	else
	1184	scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
	1185	fi
[27]	1186
	1187
[22]	1188
[475]	1189	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
	1190	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
	1191	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
	1192	# Z.B. DIE PFADE ZUM COMPILER)
	1193	echo " *** execute \"make\" on remote host"
[22]	1194
[475]	1195	if [[ $remote_host = nech ]]
	1196	then
[503]	1197	make_call_string="sxmake $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
[475]	1198	else
[503]	1199	make_call_string="make $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
[475]	1200	fi
[22]	1201
[493]	1202	# generate command to load modules, if modules are given
	1203	if [[ "$modules" != "" ]]
	1204	then
	1205	module_calls="module load ${modules};"
[562]	1206
	1207	# bugfix for wrong netcdf module
	1208	if [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
	1209	then
	1210	if [[ $(echo $module_calls \| grep -c netcdf/3.6.3-intel) != 0 ]]
	1211	then
	1212	module_calls="$module_calls export LD_LIBRARY_PATH=/sw/dataformats/netcdf/3.6.3-intel/lib:\$LD_LIBRARY_PATH;"
	1213	fi
	1214	fi
[503]	1215	else
	1216	module_calls=""
[493]	1217	fi
	1218
[475]	1219	if [[ $remote_host = ibms \|\| $remote_host = ibmy ]]
	1220	then
[22]	1221
[493]	1222	ssh ${remote_username}@${remote_addres} "$module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR"
[22]	1223
[475]	1224	elif [[ $remote_host = ibmh ]]
	1225	then
[22]	1226
[493]	1227	print "$module_calls export OBJECT_MODE=64; cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres}
[22]	1228
[475]	1229	elif [[ $remote_host = lctit ]]
	1230	then
[22]	1231
[475]	1232	echo " " > ${remote_host}_last_make_protokoll
	1233	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
	1234	do
[493]	1235	print "$module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[475]	1236	done
[22]	1237
[475]	1238	elif [[ $remote_host = lcxt4 ]]
	1239	then
[22]	1240
[493]	1241	print ". /opt/modules/default/init/ksh; $module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[22]	1242
[475]	1243	else
[407]	1244
[493]	1245	print "$module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[407]	1246
[475]	1247	fi
[22]	1248
[475]	1249	fi # ENDE UEBERSETZUNG DER UTILITY-PROGRAMME
[22]	1250
[475]	1251	rm -rf ${remote_host}_last_make_protokoll
[22]	1252
[475]	1253	# make on local host
	1254	else
[22]	1255
[544]	1256	# workaround for lcxt4
	1257	if [[ $remote_host = lcxt4 ]]
	1258	then
	1259	. /opt/modules/default/init/ksh
	1260	fi
	1261
	1262	# first load modules, if given
	1263	if [[ "$modules" != "" ]]
	1264	then
	1265	module load ${modules}
	1266	fi
	1267
	1268
[475]	1269	if [[ $compile_utility_programs = false ]]
	1270	then
[22]	1271
[475]	1272	# DEPOSITORY VERZEICHNIS ERZEUGEN, FALLS NOCH NICHT VORHANDEN
	1273	eval remote_md=$remote_md
	1274	if [[ ! -d $remote_md ]]
[40]	1275	then
[475]	1276	if mkdir $remote_md
[215]	1277	then
[475]	1278	printf "\n\n *** directory for make depository:"
	1279	printf "\n $remote_md"
	1280	printf "\n was created\n"
	1281	else
	1282	printf "\n +++ directory for make depository:"
	1283	printf "\n $remote_md"
	1284	printf "\n cannot be created"
	1285	locat=local_depository_path; exit
[215]	1286	fi
[475]	1287	fi
[215]	1288
[475]	1289	# QUELLTEXT-DATEIEN AUS REPOSITORY INS DEPOSITORY KOPIEREN
	1290	echo " "
	1291	echo " *** updating sources in $remote_md"
	1292	cd $remote_md
	1293	cp $local_source_path/${mainprog}_sources.tar .
	1294	tar xf ${mainprog}_sources.tar
[215]	1295
[475]	1296	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF LOKALEM RECHNER AUSFUEHREN
	1297	echo " "
	1298	echo " *** execute \"make\" on local host"
[1]	1299
[475]	1300	make $make_options PROG=$mainprog F90=$compiler_name COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options" 2>&1 \| tee ${remote_host}_last_make_protokoll
[40]	1301
[475]	1302	if [[ $? != 0 ]]
	1303	then
	1304	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
	1305	if [[ $silent = false ]]
[1]	1306	then
[475]	1307	answer=dummy
	1308	printf "\n"
	1309	while [[ "$answer" != c && "$answer" != k ]]
	1310	do
	1311	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
	1312	read answer
	1313	if [[ "$answer" = l ]]
[1]	1314	then
[475]	1315	more ${remote_host}_last_make_protokoll
[1]	1316	fi
[475]	1317	done
	1318	if [[ $answer = k ]]
	1319	then
	1320	locat=user_abort; exit
[1]	1321	fi
	1322	fi
[475]	1323	fi
[1]	1324
	1325
[503]	1326	# TAR NEW VERSION ON LOCAL HOST
[475]	1327	printf "\n *** tar update on local host ..."
	1328	tar -cf ${mainprog}_current_version.tar .$suf .o *.mod
[1]	1329
[22]	1330
[475]	1331	# COMPILE THE UTILITY PROGRAMS
	1332	elif [[ $compile_utility_programs = true ]]
	1333	then
	1334	printf "\n\n"
	1335	echo " *** compiling the utility programs ..."
	1336	cd ${local_source_path}/../UTIL
[503]	1337
	1338	# TOUCH FILES IN ORDER TO FORCE COMPILATION FOR EVERY BLOCK
	1339	touch *.f90
	1340	make $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options"
[475]	1341	cd - > /dev/null
[1]	1342	fi
	1343
	1344	fi
[475]	1345
[1]	1346	done
	1347
	1348
	1349	if [[ $host_found = false ]]
	1350	then
	1351	if [[ $host = all ]]
	1352	then
	1353	printf "\n +++ no hosts found in configuration file"
	1354	else
	1355	printf "\n +++ host \"$host\" not found in configuration file"
	1356	fi
	1357	locat=config_file; exit
	1358	fi
	1359
	1360
	1361
[503]	1362	# FINAL WORK
[1]	1363	rm -f hosts_found_in_config_file
	1364

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |