Home

Context Navigation

source: palm/trunk/SCRIPTS/mbuild @ 364

Last change on this file since 364 was 346, checked in by raasch, 15 years ago
small updates
Property svn:keywords set to `Id Rev`
File size: 48.3 KB

Rev	Line
[1]	1	#!/bin/ksh
[66]	2	# mbuild - Programmuebersetzungsscript
[169]	3	# $Id: mbuild 346 2009-07-06 10:13:41Z letzel $
[1]	4
	5	# Prozedur zur Uebersetzung von Programmteilen mittels make-Mechanismus
	6	# auf einem Remote-Rechner, ausgehend von Quellcode auf einem lokalen
	7	# Rechner
	8
	9	# Folgende Probleme existieren unter Linux, wenn keine AT&T-Korn-Shell
	10	# verwendet wird:
	11	# Wertzuweisungen an Variablen innerhalb von DO-Schleifen werden nicht
	12	# nach aussen weitergegeben. "while read line" funktioniert nicht
	13	# innerhalb einer Pipe.
	14
	15	# letzte Aenderung:
	16	# 06/05/02 - Siggi - Beginn der Entwicklung
	17	# 12/06/02 - Siggi - Abschluss der Entwicklungsarbeiten
	18	# 23/06/02 - Siggi - voerst kein make-clean, Abbruch bei batch-mode
	19	# 24/07/02 - Siggi - Keine Verwendung der temporaeren Datei tmp_mbuild
	20	# unter linux mehr noetig, da nun AT&T-Korn-Shell
	21	# benutzt wird
	22	# 12/09/02 - Siggi - ibmh (hanni.hlrn.de) validiert
	23	# 19/12/02 - Siggi - ibmb validiert
	24	# 05/02/03 - Siggi - hostname nobela included
	25	# 04/03/03 - Siggi - host nech included
	26	# 06/03/03 - Siggi - make_call_string is echoed without '' to
	27	# file LAST_MAKE_CALL (otherwise error on NEC, because
	28	# '' are part of compiler options
	29	# 16/03/03 - Siggi - Two underscores are placed in front of every define
	30	# string, in case that palm.f90 version contains
	31	# such strings
	32	# 16/04/03 - Siggi - First extensions for linux machines
	33	# 24/06/03 - Siggi - host orkan included
	34	# 17/07/03 - Siggi - IP adress set to new "cross" machine at DKRZ
	35	# 24/07/03 - Siggi - host maestro admitted
	36	# 06/08/03 - Siggi - host gregale admitted
	37	# 05/11/03 - Siggi - hosts irifi and quanero are now belonging to lcmuk
	38	# 19/11/03 - Heiko - on lcmuk, mbuild does not tar the *.i files
	39	# 08/01/04 - Siggi - additional preprocessor directive for ibm included
	40	# (-D$OMP=OMP) in order to avoid problems with
	41	# OMP_NUM_THREADS
	42	# 09/01/04 - Siggi - action above cancelled
	43	# 28/01/04 - Siggi - action above re-cancelled
	44	# 08/03/04 - Siggi - host scirocco admitted
	45	# 26/03/04 - Siggi - .o and .mod files are also deleted in depository, if
	46	# the respective .f90 file is not listed in the makefile
	47	# and deletion is demanded by the user
	48	# 12/04/04 - Siggi - scp2 instead of scp used for transfer from decalpha
	49	# due to error in ssh installation (otherwise a prompt
	50	# for the password appears)
	51	# 23/07/04 - Siggi - changes due to the new berni configuration
	52	# (federation switch)
	53	# 08/09/04 - Siggi - hanni IP address changed to 130.75.4.10
	54	# 23/09/04 - Joerg - correction of IP-Address for 'cross' (DKRZ)
	55	# 09/03/05 - Siggi - on nech, mbuild does not tar the *.i files
	56	# 31/03/05 - Siggi - mbuild does not tar *.i files any more
	57	# 24/04/05 - Siggi - netcdf support on lcmuk
	58	# 25/04/05 - Siggi - netcdf support on gfdl3 (decalpha)
	59	# 12/05/05 - Siggi - netcdf support on ibm
	60	# set OBJECT_MODE=64 for compiling on ibmb, ibmh
	61	# 18/05/05 - Siggi - netcdf support on nec
	62	# 19/05/05 - Siggi - IP addres 134.75.155.74 changed to 165.132.26.56
	63	# 23/05/05 - Siggi - netcdf support on ibms
	64	# 01/06/05 - Siggi - reset of cpp_options to "" on lcmuk
	65	# 30/06/05 - Siggi - netcdf support on bora
	66	# 20/10/05 - Siggi - update of netcdf-version on decalpha (gfdl3)
	67	# 04/11/05 - Siggi - netcdf 3.6.0-p1 on ibmh/ibmb
	68	# 30/12/05 - Siggi - change of IP adresses in subnet 130.75.105
	69	# host gfdl5 (ibmy) admitted
	70	# 10/01/06 - Siggi - cpp directive for NetCDF 64bit support
	71	# 20/01/06 - Siggi - cpp directive for ibmy
	72	# 09/02/06 - Marcus- compile only once on lcmuk (as on ibmh/ibmb)
	73	# 10/02/06 - Siggi - modifications for scp on decalpha
	74	# 13/04/06 - Siggi - ostria admitted
	75	# 19/04/06 - Siggi - preprocessor directive -D$OMP=OMP for ibm removed
	76	# 23/05/05 - Siggi - lctit (SUN Fire X4600) admitted
	77	# 29/05/05 - Siggi - atmos (lcide) admitted
	78	# 23/08/06 - Siggi - netcdf support for scirocco (notebook)
	79	# 24/11/06 - Siggi - breva and levanto admitted
	80	# 07/02/07 - Siggi - adapted for RIAM (neck)
[5]	81	# 10/02/07 - Siggi - all hpmuk-related code removed
[40]	82	# 02/03/07 - Siggi - compilation of utility programs and transfer of
[27]	83	# scripts to remote hosts added (option -u)
[66]	84	# 14/03/07 - Siggi - fimm admitted, revision number added to terminal
	85	# output
[69]	86	# 16/03/07 - Siggi - adjustments (netcdf) for lctit
	87	# adjustments for running under pdksh, local ip-addres
	88	# is not determined any more
[82]	89	# 30/03/07 - Siggi - cpp-directives/options + netcdf-options are read
	90	# from configuration file
	91	# host identifier (local_host) is read from config file
[116]	92	# 10/10/07 - Siggi - bugfix: handling of comment lines
[181]	93	# 18/07/08 - Siggi - adapted for lcsgih
	94	# 21/07/08 - Siggi - mainprog (executable) is added to the tar-file
	95	# ({mainprog}_current_version)
[206]	96	# 02/10/08 - Siggi - adapted for lcxt4
[215]	97	# 14/11/08 - Siggi - update mechanism completely revised: source tarfile
	98	# remains in source directory, one depository per block
[266]	99	# (given in the config-file) is created, allways all
	100	# files from the source directory are copied to the
	101	# respective depository, no additional file checks are
	102	# done any more (version 2.1)
[224]	103	# 13/01/09 - Marcus- re-enable compilation more than once on lcmuk (as on
	104	# other machines)
[266]	105	# 21/03/09 - Siggi - -u copies also copies process_dvr_output and
	106	# .dvrserver.config
[305]	107	# 21/04/09 - Siggi - adjustments for new IBM at DKRZ, which is now ibmh
[1]	108
	109
	110
	111	# VARIABLENVEREINBARUNGEN + DEFAULTWERTE
[22]	112	compile_utility_programs=false
[1]	113	config_file=.mrun.config
[67]	114	fimm=false
[1]	115	host=all
	116	host_found=false
	117	locat=normal
	118	makefile=""
	119	remote_mode=interactive
	120	scirocco=false
	121	silent=false
	122	suf=f90
	123	update=false
[83]	124	working_directory=`pwd`
[1]	125
	126	typeset -i ih ihost=0
	127
[66]	128	typeset -R30 calltime
[1]	129	typeset -L20 column1
	130	typeset -L50 column2
	131	typeset -L70 column3
[215]	132	typeset -L40 version="MBUILD 2.1 Rev$Rev: 346 $"
[1]	133
	134	# FEHLERBEHANDLUNG
	135	# BEI EXIT:
[83]	136	trap 'rm -rf $working_directory/tmp_mbuild
[69]	137	if [[ $locat != normal ]]
[1]	138	then
	139	printf "\n\n +++ mbuild killed \n\n"
	140	else
	141	printf "\n\n *** mbuild finished \n\n"
	142	fi' exit
	143
	144
	145	# BEI TERMINAL-BREAK:
[83]	146	trap 'rm -rf $working_directory/tmp_mbuild
[69]	147	printf "\n\n +++ mbuild killed by \"^C\" \n\n"
[1]	148	exit
	149	' 2
	150
	151
[215]	152	tmp_mbuild=${working_directory}/tmp_mbuild
[1]	153
	154	# SHELLSCRIPT-OPTIONEN EINLESEN
[22]	155	while getopts :c:h:m:rs:u option
[1]	156	do
	157	case $option in
	158	(c) config_file=$OPTARG;;
	159	(h) host=$OPTARG;;
	160	(m) makefile=$OPTARG;;
	161	(r) remote_mode=batch;;
	162	(s) suf=$OPTARG;;
[22]	163	(u) compile_utility_programs=true;;
[1]	164	(\?) printf "\n +++ unknown option $OPTARG \n";
	165	locat=parameter; exit;;
	166	esac
	167	done
	168
	169
	170
	171	# BATCH-MODE IST ZUR ZEIT NICHT FUNKTIONSFAEHIG
	172	if [[ $remote_mode = batch ]]
	173	then
	174	printf "\n +++ sorry, batch mode does not work! \n"
	175	locat=parameter; exit
	176	fi
	177
	178
	179
[82]	180	# PRUEFEN, OB KONFIGURATIONS-DATEI VORHANDEN
	181	if [[ ! -f $config_file ]]
	182	then
	183	printf "\n +++ configuration file: "
	184	printf "\n $config_file"
	185	printf "\n does not exist"
	186	locat=configuration; exit
	187	fi
	188
	189
	190
[1]	191	# LOKALEN RECHNER ERMITTELN
	192	local_host_real_name=$(hostname)
[69]	193	# local_addres=$(nslookup `hostname` 2>&1 \| grep "Address:" \| tail -1 \| awk '{print $2}')
	194
[1]	195
[82]	196
	197	# HOST-IDENTIFIER (local_host) AUS KONFIGURATIONSDATEI BESTIMMEN
	198	line=""
[215]	199	grep "%host_identifier" $config_file > $tmp_mbuild
[82]	200	while read line
	201	do
[116]	202	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
[82]	203	then
	204	HOSTNAME=`echo $line \| cut -d" " -s -f2`
	205	host_identifier=`echo $line \| cut -d" " -s -f3`
[83]	206	if [[ $local_host_real_name = $HOSTNAME ]]
[82]	207	then
	208	local_host=$host_identifier
	209	break
	210	fi
	211	fi
[215]	212	done < $tmp_mbuild
[82]	213
	214	if [[ "$local_host" = "" ]]
	215	then
	216	printf "\n +++ no host identifier found in configuration file \"$config_file\""
	217	printf "\n for local host \"$local_host_real_name\"."
	218	printf "\n Please add line"
	219	printf "\n \"\%host_identifier $local_host_real_name <identifier>\""
	220	printf "\n to the configuration file."
	221	locat=local_host; exit
	222	fi
	223
	224
	225
[1]	226	[[ $local_host_real_name = scirocco ]] && scirocco=true
[67]	227	[[ $local_host_real_name = fimm.bccs.uib.no ]] && fimm=true
[1]	228
	229
	230
	231	if [[ $local_host != ibms ]]
	232	then
	233	config_file=$PWD/$config_file
	234	else
	235	config_file=`pwd`/$config_file
	236	fi
	237
	238
	239
	240	# BENUTZERNAMEN AUF LOKALEM RECHNER AUS KONFIGURATIONSDATEI ERMITTELN
	241	line=""
[215]	242	grep " $local_host" $config_file \| grep "%remote_username" > $tmp_mbuild
[69]	243	while read line
[1]	244	do
[116]	245	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
[1]	246	then
	247	local_username=`echo $line \| cut -d" " -s -f2`
	248	fi
[215]	249	done < $tmp_mbuild
[1]	250
[82]	251
[1]	252	if [[ "$local_username" = "" ]]
	253	then
	254	printf "\n +++ no user name found in configuration file"
	255	printf "\n for local host \"$local_host\" "
	256	locat=config_file; exit
	257	fi
	258
	259
[5]	260	# LOKALEN QUELLTEXTPFAD ERMITTELN.
	261	# ZUERST PRUEFEN, OB EIN GLOBALER QUELLTEXTPFAD FUER ALLE RECHNER
	262	# VEREINBART WURDE.
	263	# DAZU ZUNAECHST ALLE IN DER KONFIGURATIONSDATEI VEREINBARTEN GLOBALEN
	264	# VARIABLEN SETZEN, WEIL DIESE EVTL. IN PFADNAMEN VERWENDET WERDEN
	265	line=""
[215]	266	grep "%" $config_file > $tmp_mbuild
[69]	267	while read line
[5]	268	do
[116]	269	if [[ "$line" != "" && "$(echo $line \| cut -d" " -s -f3)" = "" && $(echo $line \| cut -c1) != "#" ]]
[1]	270	then
[5]	271	var=`echo $line \| cut -d" " -s -f1 \| cut -c2-`
	272	value=`echo $line \| cut -d" " -s -f2`
[8]	273	eval export $var=\$value
[9]	274	# eval echo \" $var=\$$var \" # AUSGABE ZU TESTZWECKEN
[1]	275	fi
[215]	276	done < $tmp_mbuild
[1]	277
[5]	278	# NUN PRUEFEN, OB EIN GLOBALER QUELLTEXTPFAD VEREINBART WURDE
[1]	279	line=""
[215]	280	grep "%source_path" $config_file > $tmp_mbuild
[69]	281	while read line
[1]	282	do
	283	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	284	then
	285	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
	286	then
	287	global_source_path=`echo $line \| cut -d" " -s -f2`
	288	fi
	289	fi
[215]	290	done < $tmp_mbuild
[1]	291
	292	line=""
[215]	293	grep " $local_host" $config_file \| grep "%source_path" > $tmp_mbuild
[69]	294	while read line
[1]	295	do
	296	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	297	then
	298	local_source_path=`echo $line \| cut -d" " -s -f2`
	299	fi
[215]	300	done < $tmp_mbuild
[1]	301
	302	if [[ "$local_source_path" = "" ]]
	303	then
	304	if [[ "$global_source_path" != "" ]]
	305	then
	306	local_source_path=$global_source_path
	307	else
	308	printf "\n +++ no source path found in configuration file"
	309	printf "\n for local host \"$local_host\" "
	310	printf "\n please set \"\%source_path\" in configuration file"
	311	locat=config_file; exit
	312	fi
	313	fi
	314	eval local_source_path=$local_source_path
[8]	315	eval local_source_path=$local_source_path
[1]	316
	317
[215]	318
	319	# GLOBALEN DEPOSITORY-PFAD ERMITTELN
[1]	320	line=""
[215]	321	grep "%depository_path" $config_file > $tmp_mbuild
[69]	322	while read line
[1]	323	do
	324	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	325	then
	326	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
	327	then
	328	global_depository_path=`echo $line \| cut -d" " -s -f2`
	329	fi
	330	fi
[215]	331	done < $tmp_mbuild
[1]	332
	333
	334
[5]	335	# PRUEFEN, OB IN KONFIGURATIONSDATEI EIN HAUPTPROGRAMM
	336	# VEREINBART WURDE
	337	if [[ $(grep -c "%mainprog" $config_file) != 1 ]]
	338	then
	339	printf "\n +++ no main program or more than one main program defined"
	340	printf "\n in configuration file"
	341	locat=configuration; exit
	342	else
	343	line=`grep "%mainprog" $config_file`
	344	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
	345	then
	346	printf "\n +++ no main program defined in configuration file"
	347	locat=configuration; exit
	348	fi
	349	mainprog=`echo $line \| cut -d" " -s -f2 \| cut -d"." -f1`
	350	fi
	351
	352
	353
[1]	354	# MAKEFILE vorhanden
	355	[[ "$makefile" = "" ]] && makefile=$local_source_path/Makefile
	356	if [[ ! -f $makefile ]]
	357	then
	358	printf "\n +++ makefile: "
	359	printf "\n $makefile"
	360	printf "\n does not exist"
	361	locat=makefile; exit
	362	fi
	363
	364
	365	# HEADER-AUSGABE (TEIL1: MELDUNGEN UEBER LOKALEN RECHNER)
	366	calltime=$(date)
	367	printf "\n"
	368	printf "#------------------------------------------------------------------------# \n"
	369	printf "\| $version$calltime \| \n"
	370	printf "\| \| \n"
	371	column1="called on:"; column2=$local_host_real_name
	372	printf "\| $column1$column2 \| \n"
	373	column1="local username:"; column2=$local_username
	374	printf "\| $column1$column2 \| \n"
	375	column1="local IP-addres:"; column2=$local_addres
	376	printf "\| $column1$column2 \| \n"
	377	column1="config file:"; column2=$config_file
	378	printf "\| $column1$column2 \| \n"
	379	column1="makefile:"; column2=$makefile
	380	printf "\| $column1$column2 \| \n"
	381	column1="local source path:"; column2=$local_source_path
	382	printf "\| $column1$column2 \| \n"
	383	printf "#------------------------------------------------------------------------# \n"
	384
	385	# printf "\| \| \n"
	386
	387
[40]	388	if [[ $compile_utility_programs = false ]]
	389	then
[1]	390
[40]	391	# IN JEDEM FALL ALLEN DATEIEN WRITE-PERMIT GEBEN, DAMIT ES AUF
	392	# DEN REMOTE-RECHNERN NICHT EVTL. ZU PROBLEMEN BEIM UEBERSCHREIBEN KOMMT
[215]	393	cd $local_source_path
	394	printf "\n\n *** tar of makefile and source files in $local_source_path"
[40]	395	tar -cf ${mainprog}_sources.tar Makefile *.$suf
	396	printf "\n"
[1]	397
[40]	398	fi
[1]	399
	400
[40]	401
[1]	402	# BESTAETIGUNG ZUM WEITERMACHEN EINHOLEN
	403	if [[ $host = all ]]
	404	then
	405	printf "\n *** updates will be made for ALL hosts found in"
	406	printf "\n the configuration file"
	407	else
	408	printf "\n *** update will be made for host \"$host\" "
	409	fi
	410
	411	if [[ $silent = false ]]
	412	then
	413	answer=dummy
	414	printf "\n\n"
	415	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
	416	do
	417	printf " >>> continue (y/n) ? "
	418	read answer
	419	done
	420	if [[ $answer = n \|\| $answer = N ]]
	421	then
	422	locat=user_abort; exit
	423	fi
	424	fi
	425
	426
	427
	428
	429	# GENERIERUNG DER AKTUELLEN MODELLVERSION FUER ALLE RECHNER-/UEBERSETZUNGS-
	430	# VERSIONEN, DIE IN DER KONFIGURATIONSDATEI GEFUNDEN WERDEN
	431	printf "\n *** scanning configuration file for host(s) ..."
	432
[215]	433	grep %fopts $config_file > $tmp_mbuild
[69]	434	while read line
[1]	435	do
	436	# KOMMENTARZEILEN UEBERSPRINGEN
	437	[[ $(echo $line \| cut -c1) = "#" ]] && continue
	438	(( ihost = ihost + 1 ))
	439	hostline[$ihost]="$line"
[215]	440	done < $tmp_mbuild
[1]	441
	442
	443	while (( ih < ihost ))
	444	do
	445
	446	(( ih = ih + 1 ))
	447
	448	# REMOTE-RECHNER UND UEBERSETZUNGS-VERSION FESTSTELLEN
	449	# NUR WEITERMACHEN, WENN ENTSPRECHENDER REMOTE-RECHNER MITTELS
	450	# SHELLSCRIPT-OPTION AUCH AUSGEWAEHLT WURDE
	451	remote_host_string=`echo ${hostline[$ih]} \| cut -d" " -s -f3-`
	452	remote_host=`echo $remote_host_string \| cut -d" " -f1`
	453	if [[ $host != all ]]
	454	then
	455	[[ $remote_host != $host ]] && continue
	456	fi
	457	host_found=true
	458	condition1=`echo $remote_host_string \| cut -d" " -s -f2`
	459	if [[ $condition1 = $remote_host ]]
	460	then
	461	condition1=""
	462	else
	463	condition2=`echo $remote_host_string \| cut -d" " -s -f3`
	464	fi
	465
[82]	466	netcdf_inc=""
	467	netcdf_lib=""
[1]	468
	469	# IP-ADRESSE DES REMOTE-RECHNERS BESTIMMEN
	470	case $remote_host in
[116]	471	(lcmuk) remote_addres=130.75.105.2;;
[181]	472	(lcsgib) remote_addres=130.73.232.102;;
[346]	473	(lcsgih) remote_addres=130.75.4.102;;
[83]	474	(lctit) remote_addres=172.17.75.161;;
[206]	475	(lcxt4) remote_addres=129.177.20.113;;
[83]	476	(decalpha) remote_addres=165.132.26.56;;
[305]	477	(ibmh) remote_addres=136.172.40.15;;
[83]	478	(ibms) remote_addres=150.183.5.101;;
	479	(ibmy) remote_addres=165.132.26.58;;
	480	(nech) remote_addres=136.172.44.192;;
	481	(neck) remote_addres=133.5.178.11;;
	482	(ground.yonsei.ac.kr) remote_addres=134.75.155.33;;
	483	(*) if [[ $local_host != $remote_host ]]
[1]	484	then
[83]	485	printf "\n +++ remote host \"$remote_host\" unknown";
	486	printf "\n please inform S. Raasch!"
[1]	487	fi;;
	488	esac
	489
	490
	491	# REMOTE-USERNAMEN ERMITTELN
	492	line=""
[116]	493	found=false
[215]	494	grep "$remote_host_string" $config_file \| grep "%remote_username" > $tmp_mbuild
[69]	495	while read line1
[1]	496	do
[116]	497
[1]	498	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	499	then
	500	line="$line1"
	501	fi
[116]	502
	503	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	504	then
	505	remote_username=`echo $line \| cut -d" " -s -f2`
	506	found=true
	507	fi
	508
[215]	509	done < $tmp_mbuild
[1]	510
[116]	511	if [[ $found = false ]]
[1]	512	then
	513	printf "\n +++ no remote username found in configuration file"
	514	printf "\n for \"$remote_host_string\" "
	515	locat=config_file; exit
	516	fi
	517
	518
	519	# REMOTE-QUELLTEXTPFAD ERMITTELN
	520	line=""
[54]	521	remote_source_path=""
[215]	522	grep "$remote_host_string" $config_file \| grep "%source_path" > $tmp_mbuild
[69]	523	while read line1
[1]	524	do
[116]	525
[1]	526	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	527	then
	528	line="$line1"
	529	fi
[116]	530
	531	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	532	then
	533	remote_source_path=`echo $line \| cut -d" " -s -f2`
	534	fi
	535
[215]	536	done < $tmp_mbuild
[1]	537
	538	if [[ "$remote_source_path" = "" ]]
	539	then
	540	if [[ "$global_source_path" != "" ]]
	541	then
	542	remote_source_path=$global_source_path
	543	else
	544	printf "\n +++ no source path found in configuration file"
	545	printf "\n for \"$remote_host_string\" "
	546	locat=config_file; exit
	547	fi
	548	fi
	549
[22]	550	remote_ud=${remote_source_path}/../UTIL
[24]	551	remote_ud=$(eval echo $remote_ud)
[1]	552
[54]	553
[1]	554	# REMOTE-PFAD FUER MAKE-DEPOSITORY ERMITTELN
[54]	555	remote_md=""
[1]	556	line=""
[215]	557	grep "$remote_host_string" $config_file \| grep "%depository_path" > $tmp_mbuild
[69]	558	while read line1
[1]	559	do
[116]	560
[1]	561	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	562	then
	563	line="$line1"
	564	fi
[116]	565
	566	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	567	then
	568	remote_md=`echo $line \| cut -d" " -s -f2`
	569	fi
	570
[215]	571	done < $tmp_mbuild
[1]	572
	573	if [[ "$remote_md" = "" ]]
	574	then
	575	if [[ "$global_depository_path" != "" ]]
	576	then
	577	remote_md=$global_depository_path
	578	else
	579	printf "\n +++ no depository path found in configuration file"
	580	printf "\n for \"$remote_host_string\" "
	581	printf "\n please set \"\%depository_path\" in configuration file"
	582	locat=config_file; exit
	583	fi
	584	fi
	585
[8]	586	remote_md=$(eval echo $remote_md)
[215]	587	[[ "$condition1" != "" ]] && remote_md=${remote_md}_$condition1
	588	[[ "$condition2" != "" ]] && remote_md=${remote_md}_$condition2
[1]	589
[8]	590
[1]	591	# COMPILERNAMEN ERMITTELN
	592	line=""
[116]	593	found=false
[215]	594	grep "$remote_host_string" $config_file \| grep "%compiler_name " > $tmp_mbuild
[69]	595	while read line1
[1]	596	do
[116]	597
[1]	598	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	599	then
	600	line="$line1"
	601	fi
[116]	602
	603	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	604	then
	605	compiler_name=`echo $line \| cut -d" " -s -f2`
	606	found=true
	607	fi
	608
[215]	609	done < $tmp_mbuild
[1]	610
[116]	611	if [[ $found = false ]]
[1]	612	then
	613	printf "\n +++ no compiler name found in configuration file"
	614	printf "\n for \"$remote_host_string\" "
	615	locat=config_file; exit
	616	fi
	617
	618
[27]	619	# BEI BENUTZUNG EINES PARALLELEN COMPILERS MUSS AUCH EIN
	620	# SERIELLER COMPILERNAME ERMITTELT WERDEN
	621	if [[ $(echo $remote_host_string \| grep -c parallel) = 1 ]]
	622	then
	623	line=""
[116]	624	found=false
[215]	625	grep "$remote_host_string" $config_file \| grep "%compiler_name_ser" > $tmp_mbuild
[69]	626	while read line1
[27]	627	do
[116]	628
[27]	629	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	630	then
	631	line="$line1"
	632	fi
[116]	633
	634	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	635	then
	636	compiler_name_ser=`echo $line \| cut -d" " -s -f2`
	637	found=true
	638	fi
	639
[215]	640	done < $tmp_mbuild
[1]	641
[116]	642	if [[ $found = false ]]
[27]	643	then
[28]	644	printf "\n +++ no serial compiler name found in configuration file"
[27]	645	printf "\n for \"$remote_host_string\" "
	646	locat=config_file; exit
	647	fi
	648	else
	649	compiler_name_ser=$compiler_name
	650	fi
	651
	652
	653
[82]	654	# PRAEPROZESSOR-OPTIONEN/DIREKTIVEN ERMITTELN
	655	line=""
[116]	656	found=false
[215]	657	grep "$remote_host_string" $config_file \| grep "%cpp_options" > $tmp_mbuild
[82]	658	while read line1
	659	do
[116]	660
[82]	661	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	662	then
	663	line="$line1"
	664	fi
[116]	665
	666	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	667	then
	668	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
	669	cpp_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	670	found=true
	671	fi
	672
[215]	673	done < $tmp_mbuild
[116]	674
	675	if [[ $found = false ]]
[82]	676	then
	677	printf "\n +++ no preprocessor options found in configuration file"
	678	printf "\n for \"$remote_host_string\" "
	679	locat=config_file; exit
	680	fi
	681
[116]	682
[82]	683	# RECHNERSPEZIFISCHE CPP-DIREKTIVEN HINZUFUEGEN
	684	for string in $remote_host_string
	685	do
	686	if [[ $(echo $remote_host \| cut -c1-2) = lc && $(echo $string \| cut -c1-2) = lc ]]
	687	then
	688	cpp_options="$cpp_options -D__lc "
[83]	689	elif [[ $(echo $remote_host \| cut -c1-3) = ibm && $(echo $string \| cut -c1-3) = ibm ]]
	690	then
	691	cpp_options="${cpp_options},-D__ibm"
	692	elif [[ $(echo $remote_host \| cut -c1-3) = nec && $(echo $string \| cut -c1-3) = nec ]]
	693	then
	694	cpp_options="${cpp_options} -D__nec"
[82]	695	else
[83]	696	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
	697	then
	698	cpp_options="${cpp_options},-D__$string"
	699	else
	700	cpp_options="$cpp_options -D__$string "
	701	fi
[82]	702	fi
	703	done
	704
	705
	706
	707	# NETCDF-OPTIONEN ERMITTELN
	708	line=""
[215]	709	grep "$remote_host_string" $config_file \| grep "%netcdf_inc" > $tmp_mbuild
[82]	710	while read line1
	711	do
[116]	712
[82]	713	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	714	then
	715	line="$line1"
	716	fi
[116]	717
	718	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	719	then
	720	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
	721	netcdf_inc=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	722	fi
	723
[215]	724	done < $tmp_mbuild
[82]	725
	726	line=""
[215]	727	grep "$remote_host_string" $config_file \| grep "%netcdf_lib" > $tmp_mbuild
[82]	728	while read line1
	729	do
[116]	730
[82]	731	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	732	then
	733	line="$line1"
	734	fi
[116]	735
	736	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	737	then
	738	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
	739	netcdf_lib=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	740	fi
	741
[215]	742	done < $tmp_mbuild
[82]	743
	744
	745
[1]	746	# COMPILEROPTIONEN ERMITTELN
	747	line=""
[116]	748	found=false
[215]	749	grep "$remote_host_string" $config_file \| grep "%fopts" > $tmp_mbuild
[69]	750	while read line1
[1]	751	do
[116]	752
[1]	753	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	754	then
	755	line="$line1"
	756	fi
[116]	757
	758	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	759	then
	760	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
	761	compiler_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	762	found=true
	763
	764	# NETCDF-INCLUDEVERZEICHNIS HINZUFUEGEN
	765	compiler_options="$compiler_options $netcdf_inc"
	766	fi
	767
[215]	768	done < $tmp_mbuild
[116]	769
	770	if [[ $found = false ]]
[1]	771	then
	772	printf "\n +++ no compiler options found in configuration file"
	773	printf "\n for \"$remote_host_string\" "
	774	locat=config_file; exit
	775	fi
[82]	776
[1]	777
	778
[221]	779	# MPI LIBRARY ERMITTELN
	780	line=""
	781	found=false
	782	grep "$remote_host_string" $config_file \| grep "%mpilib" > $tmp_mbuild
	783	while read line1
	784	do
	785
	786	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	787	then
	788	line="$line1"
	789	fi
	790
	791	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	792	then
	793	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
	794	mpilib=`echo $line \| cut -d" " -s -f2`
	795	found=true
	796	fi
	797
	798	done < $tmp_mbuild
	799
	800	[[ $found = false ]] && mpilib=mpt
	801
	802
	803
	804
[1]	805	# LADER-OPTIONEN ERMITTELN
	806	line=""
[116]	807	found=false
[215]	808	grep "$remote_host_string" $config_file \| grep "%lopts" > $tmp_mbuild
[69]	809	while read line1
[1]	810	do
[116]	811
[1]	812	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	813	then
	814	line="$line1"
	815	fi
[116]	816
	817	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	818	then
	819	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
	820	loader_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	821	found=true
	822
	823	# NETCDF-LIBRARY HINZUFUEGEN
	824	loader_options="$loader_options $netcdf_lib"
	825	fi
	826
[215]	827	done < $tmp_mbuild
[1]	828
[116]	829	if [[ $found = false ]]
[1]	830	then
	831	printf "\n +++ no loader options found in configuration file"
	832	printf "\n for \"$remote_host_string\" "
	833	locat=config_file; exit
	834	fi
[82]	835
[1]	836
	837	printf "\n\n#------------------------------------------------------------------------# \n"
	838	if [[ $remote_host = $local_host ]]
	839	then
	840	column1="remote_host:"; column2="$remote_host (= local host!)"
	841	else
	842	column1="remote_host:"; column2=$remote_host
	843	fi
	844	printf "\| $column1$column2 \| \n"
	845	printf "\| \| \n"
	846	column1="conditions:"; column2="$condition1 $condition2"
	847	printf "\| $column1$column2 \| \n"
	848	column1="make depository:"; column2=$remote_md
	849	printf "\| $column1$column2 \| \n"
[215]	850	line=$(echo "$remote_md" \| cut -c51-)
	851	while [[ "$line" != "" ]]
	852	do
	853	column1=""
	854	column2=$line
	855	printf "\| $column1$column2 \| \n"
	856	line=$(echo "$line" \| cut -c51-)
	857	done
[25]	858	if [[ $compile_utility_programs = true ]]
	859	then
	860	column1="utility directory:"; column2=$remote_ud
	861	printf "\| $column1$column2 \| \n"
	862	fi
[1]	863	column1="username:"; column2=$remote_username
	864	printf "\| $column1$column2 \| \n"
	865	column1="addres:"; column2=$remote_addres
	866	printf "\| $column1$column2 \| \n"
	867	column1="compiler:"; column2=$compiler_name
	868	printf "\| $column1$column2 \| \n"
[28]	869	if [[ $compile_utility_programs = true ]]
	870	then
	871	column1="serial compiler:"; column2=$compiler_name_ser
	872	printf "\| $column1$column2 \| \n"
	873	fi
[1]	874	column1="cpp options:"; column2=$cpp_options
	875	printf "\| $column1$column2 \| \n"
	876	line=$(echo "$cpp_options" \| cut -c51-)
	877	while [[ "$line" != "" ]]
	878	do
	879	column1=""
	880	column2=$line
	881	printf "\| $column1$column2 \| \n"
	882	line=$(echo "$line" \| cut -c51-)
	883	done
	884	column1="compiler options:"; column2=$compiler_options
	885	printf "\| $column1$column2 \| \n"
	886	line=$(echo "$compiler_options" \| cut -c51-)
	887	while [[ "$line" != "" ]]
	888	do
	889	column1=""
	890	column2=$line
	891	printf "\| $column1$column2 \| \n"
	892	line=$(echo "$line" \| cut -c51-)
	893	done
[221]	894	if [[ $( echo $remote_host \| cut -c1-5 ) = lcsgi ]]
	895	then
	896	column1="mpi library:"; column2=$mpilib
	897	printf "\| $column1$column2 \| \n"
	898	fi
[1]	899	column1="loader options:"; column2=$loader_options
	900	printf "\| $column1$column2 \| \n"
	901	line=$(echo "$loader_options" \| cut -c51-)
	902	while [[ "$line" != "" ]]
	903	do
	904	column1=""
	905	column2=$line
	906	printf "\| $column1$column2 \| \n"
	907	line=$(echo "$line" \| cut -c51-)
	908	done
	909	printf "#------------------------------------------------------------------------# \n"
	910
	911	if [[ $silent = false ]]
	912	then
	913	answer=dummy
	914	printf "\n\n"
	915	while [[ "$answer" != y && "$answer" != Y && "$answer" != c && "$answer" != C && "$answer" != s && "$answer" != S && "$answer" != a && "$answer" != A ]]
	916	do
	917	printf " >>> continue (y(es)/c(ontinue)/a(bort)/s(skip)) ? "
	918	read answer
	919	done
	920	if [[ $answer = a \|\| $answer = A ]]
	921	then
	922	locat=user_abort; exit
	923	fi
	924	if [[ $answer = c \|\| $answer = C ]]
	925	then
	926	silent=false
	927	fi
	928	if [[ $answer = s \|\| $answer = S ]]
	929	then
	930	continue
	931	fi
	932	fi
	933
	934
	935	if [[ $remote_mode = batch ]]
	936	then
	937
	938	# BATCH-JOB PARAMETER SETZEN
	939	case $remote_host in
	940	(t3eb) queue=berte; memory=60; cputime=1000; xoption="-X 0";;
	941	(t3eh) queue=comp_t3e; memory=60; cputime=360;;
	942	(t3ej2) queue=normal; memory=60; cputime=1000; xoption="-X 0";;
[5]	943	(t3ej5\|ground.yonsei.ac.kr) printf "\n --- remote host \"$remote_host\" does not allow batch jobs"; continue;;
[1]	944	esac
	945
	946
	947	# BATCH-JOB ZUSAMMENSTELLEN
	948	printf "\n *** creating batch-job for remote host"
	949	echo " " > mbuild_job
	950
	951	# AUF CRAY-RECHNERN IN JUELICH WIRD KEIN BENUTZER-PROFILE AUSGEFUEHRT
	952	# DIES WIRD HIER GETAN, UM PFADE USW. ZU SETZEN
	953	if [[ $remote_host = t3ej2 ]]
	954	then
	955	echo "set +vx" >> mbuild_job
	956	echo ". .profile" >> mbuild_job
	957	echo "set -x" >> mbuild_job
	958	fi
	959
	960	# AUF CRAY-RECHNERN GELADENE MODULE AUFLISTEN
	961	if [[ $host = t3eb \|\| $host = t3eh \|\| $host = t3ej2 ]]
	962	then
	963	echo "module list" >> mbuild_job
	964	fi
	965
	966
	967	# WECHSEL IN TEMPORAERES VERZEICHNIS
	968	echo "cd ${remote_md}" >> mbuild_job
	969
	970
	971	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
	972	echo "scp ${local_username}@${local_addres}:~/modell/code_3dp/palm_current_version/${mainprog}_sources.tar ${mainprog}_sources.tar" >> mbuild_job
	973	# echo "[[ \$? != 0 ]] && (echo "+++ scp failed"; exit)" >> mbuild_job
	974
	975
	976	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
	977	echo "[[ -f ${mainprog}_current_version.tar ]] && tar -xvf ${mainprog}_current_version.tar" >> mbuild_job
	978
	979
	980	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
	981	echo "tar -xvf ${mainprog}_sources.tar" >> mbuild_job
	982
	983
	984	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
	985	echo "make PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" " >> mbuild_job
	986	echo "chmod u+w *" >> mbuild_job
	987
	988	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
	989	echo "tar -cvf ${mainprog}_current_version.tar .f90 .o" >> mbuild_job
	990
	991
	992	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
	993	echo "make clean" >> mbuild_job
	994	echo "rm ${mainprog}_sources.tar" >> mbuild_job
	995	echo "rm *.f90 Makefile" >> mbuild_job
	996
	997
	998
	999	# JOB MITTELS SUBJOB STARTEN
	1000	printf "\n *** sending batch job to remote host"
	1001	# subjob $xoption -h $remote_host -q $queue -m $memory -t $cputime -v mbuild_job
	1002
	1003
	1004	# JOBFILE LOESCHEN
	1005	# rm aljob
	1006
	1007	else
	1008
	1009	if [[ $remote_host != $local_host ]]
	1010	then
	1011
[40]	1012	if [[ $compile_utility_programs = false ]]
[1]	1013	then
	1014
[40]	1015	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
	1016	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
	1017	echo " *** copying \"${mainprog}_sources.tar\" to \"${remote_addres}:${remote_md}/\" "
	1018	if [[ $remote_host != lctit ]]
	1019	then
	1020	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})"
	1021	else
[206]	1022	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
[40]	1023	# MIT SSH, DESHALB AUFRUF PER PIPE
	1024	print "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})" \| ssh ${remote_username}@${remote_addres} 2>&1
	1025	fi
	1026	if [[ $local_host = decalpha ]]
	1027	then
[206]	1028	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
[40]	1029	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
	1030	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
	1031	remote_md=`echo $remote_md \| sed 's/\$HOME\///'`
[215]	1032	/bin/scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
[40]	1033	else
[215]	1034	scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
[40]	1035	fi
[1]	1036
	1037
	1038
[40]	1039	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
	1040	echo " *** untar previous update on remote host, if existing"
	1041	if [[ $remote_host != lctit ]]
	1042	then
	1043	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar"
	1044	else
[206]	1045	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
[40]	1046	# MIT SSH, DESHALB AUFRUF PER PIPE
	1047	print "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
	1048	fi
[1]	1049
	1050
[40]	1051	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
	1052	echo " *** untar actual sources on remote host"
	1053	if [[ $remote_host != lctit ]]
	1054	then
	1055	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; tar -xf ${mainprog}_sources.tar"
	1056	else
[206]	1057	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
[40]	1058	# MIT SSH, DESHALB AUFRUF PER PIPE
	1059	print "cd ${remote_md}; tar -xf ${mainprog}_sources.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
	1060	fi
[1]	1061
	1062
[40]	1063	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
	1064	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
	1065	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
	1066	# Z.B. DIE PFADE ZUM COMPILER)
	1067	echo " *** execute \"make\" on remote host"
[1]	1068
[40]	1069	if [[ $remote_host = nech ]]
	1070	then
	1071	make_call_string="sxmake PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
	1072	else
	1073	make_call_string="make PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
	1074	fi
	1075
	1076	if [[ $remote_host = t3eh ]]
	1077	then
[1]	1078
[40]	1079	print "xterm\nexit\n cd ${remote_md}; make PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" " \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1080
[40]	1081	elif [[ $remote_host = t3ej2 \|\| $remote_host = ibms \|\| $remote_host = ibmy ]]
	1082	then
[1]	1083
[40]	1084	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; echo '$make_call_string' > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1085
[305]	1086	elif [[ $remote_host = ibmh ]]
[40]	1087	then
[1]	1088
[40]	1089	print "export OBJECT_MODE=64; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1090
[181]	1091	elif [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
	1092	then
	1093
[221]	1094	print ". /usr/share/modules/init/bash; module load $mpilib; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[196]	1095	# print ". /usr/share/modules/init/bash; module load mvapich2/1.2rc1-intel; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
	1096	# print ". /usr/share/modules/init/bash; module load mvapich2; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[181]	1097
[40]	1098	elif [[ $remote_host = lctit ]]
	1099	then
[1]	1100
[40]	1101	echo " " > ${remote_host}_last_make_protokoll
	1102	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
	1103	do
	1104	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
	1105	done
[1]	1106
[206]	1107	elif [[ $remote_host = lcxt4 ]]
	1108	then
	1109
	1110	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
	1111
[40]	1112	else
[1]	1113
[40]	1114	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1115
[40]	1116	fi
[1]	1117
[40]	1118	if [[ $(grep -c MAKE_ERROR ${remote_host}_last_make_protokoll) != 0 ]]
[1]	1119	then
[40]	1120	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
	1121	if [[ $silent = false ]]
	1122	then
	1123	answer=dummy
	1124	printf "\n"
	1125	while [[ "$answer" != c && "$answer" != k ]]
	1126	do
	1127	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
	1128	read answer
	1129	if [[ "$answer" = l ]]
	1130	then
	1131	more ${remote_host}_last_make_protokoll
	1132	fi
	1133	done
	1134	if [[ $answer = k ]]
[1]	1135	then
[40]	1136	locat=user_abort; exit
[1]	1137	fi
	1138	fi
	1139	fi
	1140
	1141
	1142
[40]	1143	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
	1144	printf "\n *** tar update on remote host ..."
	1145	if [[ $remote_host != lctit ]]
	1146	then
[181]	1147	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod"
[40]	1148	else
[206]	1149	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
[40]	1150	# MIT SSH, DESHALB AUFRUF PER PIPE
[181]	1151	print "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod" \| ssh ${remote_username}@${remote_addres} 2>&1
[40]	1152	fi
[1]	1153
	1154
[40]	1155	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
	1156	# printf "\n *** \"make clean\" on remote host ..."
	1157	# ssh ${remote_username}@${remote_addres} "cd ${remote_md}; make clean; rm ${mainprog}_sources.tar; rm *.f90 Makefile"
	1158	# printf "\n"
[1]	1159
	1160
[25]	1161
	1162
[22]	1163	# GLEICHE AKTIONEN FUER DIE UTILITY-PROGRAMME DURCHFUEHREN
	1164	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
	1165	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
[40]	1166	elif [[ $compile_utility_programs = true ]]
[22]	1167	then
	1168
[24]	1169	printf "\n\n"
[27]	1170	echo " *** copying scripts and utility programs to \"${remote_addres}:${remote_ud}/\" "
	1171	cd ${local_source_path}/../SCRIPTS
[22]	1172
	1173	if [[ $remote_host != lctit ]]
	1174	then
[24]	1175	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)"
[22]	1176	else
[206]	1177	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
[22]	1178	# MIT SSH, DESHALB AUFRUF PER PIPE
[24]	1179	print "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)" \| ssh ${remote_username}@${remote_addres} 2>&1
[22]	1180	fi
	1181
[27]	1182	# KOPIEREN DER SCRIPTE
[22]	1183	if [[ $local_host = decalpha ]]
	1184	then
[206]	1185	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
[22]	1186	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
	1187	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
	1188	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
[266]	1189	/bin/scp batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
[27]	1190	else
[266]	1191	scp batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
[27]	1192	fi
	1193
	1194	cd - > /dev/null
	1195	cd ${local_source_path}/../UTIL
	1196
	1197
	1198	# KOPIEREN DER UTILITY-PROGRAMME
	1199	if [[ $local_host = decalpha ]]
	1200	then
[206]	1201	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
[27]	1202	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
	1203	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
	1204	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
[24]	1205	/bin/scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
[22]	1206	else
[24]	1207	scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
[22]	1208	fi
	1209
	1210
	1211
	1212	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
	1213	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
	1214	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
	1215	# Z.B. DIE PFADE ZUM COMPILER)
	1216	echo " *** execute \"make\" on remote host"
	1217
	1218	if [[ $remote_host = nech ]]
	1219	then
[27]	1220	make_call_string="sxmake F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
[22]	1221	else
[27]	1222	make_call_string="make F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
[22]	1223	fi
	1224
	1225	if [[ $remote_host = ibms \|\| $remote_host = ibmy ]]
	1226	then
	1227
[25]	1228	ssh ${remote_username}@${remote_addres} "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR"
[22]	1229
[305]	1230	elif [[ $remote_host = ibmh ]]
[22]	1231	then
	1232
[25]	1233	print "export OBJECT_MODE=64; cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres}
[22]	1234
	1235	elif [[ $remote_host = lctit ]]
	1236	then
	1237
	1238	echo " " > ${remote_host}_last_make_protokoll
	1239	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
	1240	do
	1241	print "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
	1242	done
	1243
	1244	else
	1245
	1246	print "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
	1247
	1248	fi
	1249
	1250	fi # ENDE UEBERSETZUNG DER UTILITY-PROGRAMME
	1251
[75]	1252	rm -rf ${remote_host}_last_make_protokoll
[22]	1253
[1]	1254	else
	1255
[40]	1256	if [[ $compile_utility_programs = false ]]
	1257	then
[1]	1258
[215]	1259	# DEPOSITORY VERZEICHNIS ERZEUGEN, FALLS NOCH NICHT VORHANDEN
	1260	eval remote_md=$remote_md
	1261	if [[ ! -d $remote_md ]]
	1262	then
	1263	if mkdir $remote_md
	1264	then
	1265	printf "\n\n *** directory for make depository:"
	1266	printf "\n $remote_md"
	1267	printf "\n was created\n"
	1268	else
	1269	printf "\n +++ directory for make depository:"
	1270	printf "\n $remote_md"
	1271	printf "\n cannot be created"
	1272	locat=local_depository_path; exit
	1273	fi
	1274	fi
	1275
	1276	# QUELLTEXT-DATEIEN AUS REPOSITORY INS DEPOSITORY KOPIEREN
	1277	echo " "
	1278	echo " *** updating sources in $remote_md"
	1279	cd $remote_md
	1280	cp $local_source_path/${mainprog}_sources.tar .
	1281	tar xf ${mainprog}_sources.tar
	1282
[40]	1283	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF LOKALEM RECHNER AUSFUEHREN
	1284	echo " "
	1285	echo " *** execute \"make\" on local host"
[1]	1286
[40]	1287	make PROG=$mainprog F90=$compiler_name COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options" 2>&1 \| tee ${remote_host}_last_make_protokoll
	1288
	1289	if [[ $? != 0 ]]
[1]	1290	then
[40]	1291	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
	1292	if [[ $silent = false ]]
	1293	then
	1294	answer=dummy
	1295	printf "\n"
	1296	while [[ "$answer" != c && "$answer" != k ]]
	1297	do
	1298	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
	1299	read answer
	1300	if [[ "$answer" = l ]]
	1301	then
	1302	more ${remote_host}_last_make_protokoll
	1303	fi
	1304	done
	1305	if [[ $answer = k ]]
[1]	1306	then
[40]	1307	locat=user_abort; exit
[1]	1308	fi
	1309	fi
	1310	fi
	1311
	1312
[40]	1313	# NEUE VERSION AUF LOKALEM RECHNER ZUSAMMENPACKEN
	1314	printf "\n *** tar update on local host ..."
	1315	tar -cf ${mainprog}_current_version.tar .$suf .o *.mod
[1]	1316
[22]	1317
	1318	# COMPILE THE UTILITY PROGRAMS
[40]	1319	elif [[ $compile_utility_programs = true ]]
[22]	1320	then
	1321	printf "\n\n"
	1322	echo " *** compiling the utility programs ..."
	1323	cd ${local_source_path}/../UTIL
[35]	1324	make F90=$compiler_name F90_SER=$compiler_name_ser COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options"
[22]	1325	cd - > /dev/null
	1326	fi
	1327
[1]	1328	fi
	1329
	1330	fi
	1331	done
	1332
	1333
	1334	if [[ $host_found = false ]]
	1335	then
	1336	if [[ $host = all ]]
	1337	then
	1338	printf "\n +++ no hosts found in configuration file"
	1339	else
	1340	printf "\n +++ host \"$host\" not found in configuration file"
	1341	fi
	1342	locat=config_file; exit
	1343	fi
	1344
	1345
	1346
	1347	# ABSCHLIESSENDE ARBEITEN
	1348	rm -f hosts_found_in_config_file
	1349

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |