Home

Context Navigation

source: palm/trunk/SCRIPTS/mbuild @ 1043

Last change on this file since 1043 was 1040, checked in by raasch, 12 years ago
script adjustments for lckiaps
Property svn:keywords set to `Id Rev`
File size: 54.4 KB

Rev	Line
[1]	1	#!/bin/ksh
[503]	2	# mbuild - script for compiling the PALM code and its utility programs
[169]	3	# $Id: mbuild 1040 2012-11-06 02:14:27Z raasch $
[1]	4
[503]	5	# Procedure to compile code on local and remote hosts using the
	6	# make-mechanism. The source code must be provided on the local host.
[1]	7
[503]	8	# Last changes:
	9	# 06/05/02 - Siggi - start development
	10	# 12/06/02 - Siggi - first version finished
	11	# 12/09/02 - Siggi - ibmh (hanni.hlrn.de) included
	12	# 19/12/02 - Siggi - ibmb included
[1]	13	# 05/02/03 - Siggi - hostname nobela included
	14	# 04/03/03 - Siggi - host nech included
	15	# 06/03/03 - Siggi - make_call_string is echoed without '' to
	16	# file LAST_MAKE_CALL (otherwise error on NEC, because
	17	# '' are part of compiler options
	18	# 16/03/03 - Siggi - Two underscores are placed in front of every define
	19	# string, in case that palm.f90 version contains
	20	# such strings
	21	# 16/04/03 - Siggi - First extensions for linux machines
	22	# 24/06/03 - Siggi - host orkan included
	23	# 17/07/03 - Siggi - IP adress set to new "cross" machine at DKRZ
	24	# 24/07/03 - Siggi - host maestro admitted
	25	# 06/08/03 - Siggi - host gregale admitted
	26	# 05/11/03 - Siggi - hosts irifi and quanero are now belonging to lcmuk
	27	# 19/11/03 - Heiko - on lcmuk, mbuild does not tar the *.i files
	28	# 08/01/04 - Siggi - additional preprocessor directive for ibm included
	29	# (-D$OMP=OMP) in order to avoid problems with
	30	# OMP_NUM_THREADS
	31	# 09/01/04 - Siggi - action above cancelled
	32	# 28/01/04 - Siggi - action above re-cancelled
	33	# 08/03/04 - Siggi - host scirocco admitted
	34	# 26/03/04 - Siggi - .o and .mod files are also deleted in depository, if
	35	# the respective .f90 file is not listed in the makefile
	36	# and deletion is demanded by the user
	37	# 12/04/04 - Siggi - scp2 instead of scp used for transfer from decalpha
	38	# due to error in ssh installation (otherwise a prompt
	39	# for the password appears)
	40	# 23/07/04 - Siggi - changes due to the new berni configuration
	41	# (federation switch)
	42	# 08/09/04 - Siggi - hanni IP address changed to 130.75.4.10
	43	# 23/09/04 - Joerg - correction of IP-Address for 'cross' (DKRZ)
	44	# 09/03/05 - Siggi - on nech, mbuild does not tar the *.i files
	45	# 31/03/05 - Siggi - mbuild does not tar *.i files any more
	46	# 24/04/05 - Siggi - netcdf support on lcmuk
	47	# 25/04/05 - Siggi - netcdf support on gfdl3 (decalpha)
	48	# 12/05/05 - Siggi - netcdf support on ibm
	49	# set OBJECT_MODE=64 for compiling on ibmb, ibmh
	50	# 18/05/05 - Siggi - netcdf support on nec
	51	# 19/05/05 - Siggi - IP addres 134.75.155.74 changed to 165.132.26.56
	52	# 23/05/05 - Siggi - netcdf support on ibms
	53	# 01/06/05 - Siggi - reset of cpp_options to "" on lcmuk
	54	# 30/06/05 - Siggi - netcdf support on bora
	55	# 20/10/05 - Siggi - update of netcdf-version on decalpha (gfdl3)
	56	# 04/11/05 - Siggi - netcdf 3.6.0-p1 on ibmh/ibmb
	57	# 30/12/05 - Siggi - change of IP adresses in subnet 130.75.105
	58	# host gfdl5 (ibmy) admitted
	59	# 10/01/06 - Siggi - cpp directive for NetCDF 64bit support
	60	# 20/01/06 - Siggi - cpp directive for ibmy
	61	# 09/02/06 - Marcus- compile only once on lcmuk (as on ibmh/ibmb)
	62	# 10/02/06 - Siggi - modifications for scp on decalpha
	63	# 13/04/06 - Siggi - ostria admitted
	64	# 19/04/06 - Siggi - preprocessor directive -D$OMP=OMP for ibm removed
	65	# 23/05/05 - Siggi - lctit (SUN Fire X4600) admitted
	66	# 29/05/05 - Siggi - atmos (lcide) admitted
	67	# 23/08/06 - Siggi - netcdf support for scirocco (notebook)
	68	# 24/11/06 - Siggi - breva and levanto admitted
	69	# 07/02/07 - Siggi - adapted for RIAM (neck)
[5]	70	# 10/02/07 - Siggi - all hpmuk-related code removed
[40]	71	# 02/03/07 - Siggi - compilation of utility programs and transfer of
[27]	72	# scripts to remote hosts added (option -u)
[66]	73	# 14/03/07 - Siggi - fimm admitted, revision number added to terminal
	74	# output
[69]	75	# 16/03/07 - Siggi - adjustments (netcdf) for lctit
	76	# adjustments for running under pdksh, local ip-addres
	77	# is not determined any more
[82]	78	# 30/03/07 - Siggi - cpp-directives/options + netcdf-options are read
	79	# from configuration file
	80	# host identifier (local_host) is read from config file
[116]	81	# 10/10/07 - Siggi - bugfix: handling of comment lines
[181]	82	# 18/07/08 - Siggi - adapted for lcsgih
	83	# 21/07/08 - Siggi - mainprog (executable) is added to the tar-file
	84	# ({mainprog}_current_version)
[206]	85	# 02/10/08 - Siggi - adapted for lcxt4
[215]	86	# 14/11/08 - Siggi - update mechanism completely revised: source tarfile
	87	# remains in source directory, one depository per block
[266]	88	# (given in the config-file) is created, allways all
	89	# files from the source directory are copied to the
	90	# respective depository, no additional file checks are
	91	# done any more (version 2.1)
[224]	92	# 13/01/09 - Marcus- re-enable compilation more than once on lcmuk (as on
	93	# other machines)
[266]	94	# 21/03/09 - Siggi - -u copies also copies process_dvr_output and
	95	# .dvrserver.config
[305]	96	# 21/04/09 - Siggi - adjustments for new IBM at DKRZ, which is now ibmh
[367]	97	# 25/08/09 - BjornM- adapted for lck
[407]	98	# 01/12/09 - BjornM- re-adjustments for lcxt4
[437]	99	# 01/02/10 - Siggi - adjustments for lcxt5m
[475]	100	# 03/02/10 - Siggi - make options (mopts) to be set by configuration file
	101	# implemented, remoted mode option -r completely
	102	# removed, t3e related parts removed
[492]	103	# 26/02/10 - BjornM- re-adjustments for lcxt4 (new modules)
[493]	104	# 01/03/10 - Siggi - mpilib replaced by modules: explicit module settings
	105	# removed; modules should now be given in the
	106	# configuration file
[503]	107	# 02/03/10 - Siggi - utility programs are created separately for each
	108	# block in the configuration file,
	109	# parallel make for utility programs
[508]	110	# 12/03/10 - Siggi - bugfix: remode_md was given a wrong value
[544]	111	# 16/08/10 - BjornM- bugfix: call of modules on local host, new workaround
	112	# for lcxt4
[555]	113	# 07/09/10 - Siggi - bugfix for wrong netcdf/3.6.3 module on lcsgi
[622]	114	# 08/12/10 - Siggi - initialization of the module command changed for
	115	# SGI-ICE/lcsgi
	116	# adjustments for Kyushu Univ. (lcrte, ibmku)
[635]	117	# 14/12/10 - Siggi - adjustments for new Tsubame system at Tokyo
	118	# institute of technology (lctit)
[693]	119	# 04/03/11 - BjornM- re-adjustments for lcxt4
	120	# 06/03/11 - Siggi - adjustments for ibmkisti
[717]	121	# 03/04/11 - Micha - added lckordi
[740]	122	# 17/08/11 - Siggi - HLRN access via hicegate0 (130.75.4.101)
[784]	123	# 27/11/11 - Siggi - Bugfix for make options setting (-j)
[793]	124	# 12/12/11 - BjornM- added mrun GUI to ulitity programs
[807]	125	# 25/01/12 - BjornM- compilation of check_namelist_files (namelist file
	126	# check program) has been added to the utility branch),
	127	# modfified the compilation of mrungui
[811]	128	# 31/01/12 - BjornM- bugfix for compilation of utility programs on
	129	# multiple localhost branches
[818]	130	# 08/03/12 - BjornM- bugfix: cpp directive for namelist check program
	131	# corrected
[935]	132	# 02/05/12 - Bjoern- lcxt4 is now lcxe6, adjustments for lcxe6,
	133	# bugfixes for the parameter file check, initial
	134	# commands on ssh calls sourced out to .mrun.config
	135	# 05/06/12 - Bjoern- bugfixes for execution of login_init_cmd
	136	# 18/06/12 - Siggi - option -v (silent mode) added
[936]	137	# 25/06/12 - Siggi - option -K (block conditions) added
[1018]	138	# 27/09/12 - Siggi - compiler options (F90FLAGS) added for namelist check
[1021]	139	# 02/10/12 - Siggi - added lcsb
[1040]	140	# 02/11/12 - Siggi - added lckiaps
[1]	141
	142
[503]	143	# VARIABLE DECLARATIONS + DEFAULT VALUES
[936]	144	block_conditions=none
	145	block_conditions_found=false
[22]	146	compile_utility_programs=false
[1]	147	config_file=.mrun.config
[67]	148	fimm=false
[1]	149	host=all
	150	host_found=false
	151	locat=normal
	152	makefile=""
[493]	153	module_calls=""
[811]	154	util_compiled_localhost=false
[1]	155	scirocco=false
	156	silent=false
	157	suf=f90
	158	update=false
[83]	159	working_directory=`pwd`
[1]	160
	161	typeset -i ih ihost=0
	162
[66]	163	typeset -R30 calltime
[1]	164	typeset -L20 column1
	165	typeset -L50 column2
	166	typeset -L70 column3
[215]	167	typeset -L40 version="MBUILD 2.1 Rev$Rev: 1040 $"
[1]	168
[503]	169	# ERROR HANDLING
	170	# IN CASE OF EXIT:
[83]	171	trap 'rm -rf $working_directory/tmp_mbuild
[69]	172	if [[ $locat != normal ]]
[1]	173	then
	174	printf "\n\n +++ mbuild killed \n\n"
	175	else
	176	printf "\n\n *** mbuild finished \n\n"
	177	fi' exit
	178
	179
[503]	180	# IN CASE OF TERMINAL-BREAK:
[83]	181	trap 'rm -rf $working_directory/tmp_mbuild
[69]	182	printf "\n\n +++ mbuild killed by \"^C\" \n\n"
[1]	183	exit
	184	' 2
	185
	186
[215]	187	tmp_mbuild=${working_directory}/tmp_mbuild
[1]	188
[503]	189	# READ SHELLSCRIPT-OPTIONS
[936]	190	while getopts :c:h:K:m:s:uv option
[1]	191	do
	192	case $option in
	193	(c) config_file=$OPTARG;;
	194	(h) host=$OPTARG;;
[936]	195	(K) block_conditions=$OPTARG;;
[1]	196	(m) makefile=$OPTARG;;
	197	(s) suf=$OPTARG;;
[22]	198	(u) compile_utility_programs=true;;
[935]	199	(v) silent=true;;
[1]	200	(\?) printf "\n +++ unknown option $OPTARG \n";
	201	locat=parameter; exit;;
	202	esac
	203	done
	204
	205
	206
[503]	207	# CHECK, IF CONFIGURATION-FILE EXISTS
[82]	208	if [[ ! -f $config_file ]]
	209	then
	210	printf "\n +++ configuration file: "
	211	printf "\n $config_file"
	212	printf "\n does not exist"
	213	locat=configuration; exit
	214	fi
	215
	216
	217
[503]	218	# DETERMINE THE LOCAL HOST
[1]	219	local_host_real_name=$(hostname)
[69]	220	# local_addres=$(nslookup `hostname` 2>&1 \| grep "Address:" \| tail -1 \| awk '{print $2}')
	221
[1]	222
[82]	223
[503]	224	# DETERMINE HOST-IDENTIFIER (local_host) FROM THE CONFIG-FILE
[82]	225	line=""
[215]	226	grep "%host_identifier" $config_file > $tmp_mbuild
[82]	227	while read line
	228	do
[116]	229	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
[82]	230	then
	231	HOSTNAME=`echo $line \| cut -d" " -s -f2`
	232	host_identifier=`echo $line \| cut -d" " -s -f3`
[83]	233	if [[ $local_host_real_name = $HOSTNAME ]]
[82]	234	then
	235	local_host=$host_identifier
	236	break
	237	fi
	238	fi
[215]	239	done < $tmp_mbuild
[82]	240
	241	if [[ "$local_host" = "" ]]
	242	then
	243	printf "\n +++ no host identifier found in configuration file \"$config_file\""
	244	printf "\n for local host \"$local_host_real_name\"."
	245	printf "\n Please add line"
	246	printf "\n \"\%host_identifier $local_host_real_name <identifier>\""
	247	printf "\n to the configuration file."
	248	locat=local_host; exit
	249	fi
	250
	251
	252
[1]	253	[[ $local_host_real_name = scirocco ]] && scirocco=true
[67]	254	[[ $local_host_real_name = fimm.bccs.uib.no ]] && fimm=true
[1]	255
	256
	257
	258	if [[ $local_host != ibms ]]
	259	then
	260	config_file=$PWD/$config_file
	261	else
	262	config_file=`pwd`/$config_file
	263	fi
	264
	265
[936]	266	# determine the block conditions
	267	if [[ $block_conditions != none ]]
	268	then
	269	block_condition1=`echo $block_conditions \| cut -d" " -f1`
	270	block_condition2=`echo $block_conditions \| cut -d" " -f2`
	271	if [[ "$block_condition2" = "$block_condition1" ]]
	272	then
	273	block_condition2=""
	274	fi
	275	fi
	276
[1]	277
[503]	278	# DETERMINE USER NAME ON LOCAL HOST FROM THE CONFIG-FILE
[1]	279	line=""
[215]	280	grep " $local_host" $config_file \| grep "%remote_username" > $tmp_mbuild
[69]	281	while read line
[1]	282	do
[116]	283	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
[1]	284	then
	285	local_username=`echo $line \| cut -d" " -s -f2`
	286	fi
[215]	287	done < $tmp_mbuild
[1]	288
[82]	289
[1]	290	if [[ "$local_username" = "" ]]
	291	then
	292	printf "\n +++ no user name found in configuration file"
	293	printf "\n for local host \"$local_host\" "
	294	locat=config_file; exit
	295	fi
	296
	297
[503]	298	# DETERMINE LOCAL SOURCE-CODE PATH.
	299	# FIRST CHECK, IF A GLOBAL SOURCE-CODE PATH HAS BEEN DECLARED FOR ALL HOSTS.
	300	# THEREFORE, FIRST SET ALL GLOBAL VARIABLES DECLARED IN THE CONFIG-FILE,
	301	# BECAUSE THEY MAY BE USED AS PART OF THE PATH NAME.
[5]	302	line=""
[215]	303	grep "%" $config_file > $tmp_mbuild
[69]	304	while read line
[5]	305	do
[116]	306	if [[ "$line" != "" && "$(echo $line \| cut -d" " -s -f3)" = "" && $(echo $line \| cut -c1) != "#" ]]
[1]	307	then
[5]	308	var=`echo $line \| cut -d" " -s -f1 \| cut -c2-`
	309	value=`echo $line \| cut -d" " -s -f2`
[8]	310	eval export $var=\$value
[1]	311	fi
[215]	312	done < $tmp_mbuild
[1]	313
[503]	314	# NOW CHECK, IF A GLOBAL SOURCE-CODE-PATH HAS BEEN DECLARED
[1]	315	line=""
[215]	316	grep "%source_path" $config_file > $tmp_mbuild
[69]	317	while read line
[1]	318	do
	319	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	320	then
	321	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
	322	then
	323	global_source_path=`echo $line \| cut -d" " -s -f2`
	324	fi
	325	fi
[215]	326	done < $tmp_mbuild
[1]	327
	328	line=""
[215]	329	grep " $local_host" $config_file \| grep "%source_path" > $tmp_mbuild
[69]	330	while read line
[1]	331	do
	332	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	333	then
	334	local_source_path=`echo $line \| cut -d" " -s -f2`
	335	fi
[215]	336	done < $tmp_mbuild
[1]	337
	338	if [[ "$local_source_path" = "" ]]
	339	then
	340	if [[ "$global_source_path" != "" ]]
	341	then
	342	local_source_path=$global_source_path
	343	else
	344	printf "\n +++ no source path found in configuration file"
	345	printf "\n for local host \"$local_host\" "
	346	printf "\n please set \"\%source_path\" in configuration file"
	347	locat=config_file; exit
	348	fi
	349	fi
	350	eval local_source_path=$local_source_path
[8]	351	eval local_source_path=$local_source_path
[1]	352
	353
[215]	354
[503]	355	# DETERMINE GLOBAL DEPOSITORY-PATH
[1]	356	line=""
[215]	357	grep "%depository_path" $config_file > $tmp_mbuild
[69]	358	while read line
[1]	359	do
	360	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	361	then
	362	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
	363	then
	364	global_depository_path=`echo $line \| cut -d" " -s -f2`
	365	fi
	366	fi
[215]	367	done < $tmp_mbuild
[1]	368
[807]	369	if [[ $found = false ]]
	370	then
	371	printf "\n +++ no \%depository_path found in"
	372	printf "\n $config_file"
	373	locat=depository_path; exit
	374	fi
[1]	375
[503]	376	# CHECK, IF A MAIN PROGRAM HAS BEEN DEFINED IN THE CONFIG-FILE
[5]	377	if [[ $(grep -c "%mainprog" $config_file) != 1 ]]
	378	then
	379	printf "\n +++ no main program or more than one main program defined"
	380	printf "\n in configuration file"
	381	locat=configuration; exit
	382	else
	383	line=`grep "%mainprog" $config_file`
	384	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
	385	then
	386	printf "\n +++ no main program defined in configuration file"
	387	locat=configuration; exit
	388	fi
	389	mainprog=`echo $line \| cut -d" " -s -f2 \| cut -d"." -f1`
	390	fi
	391
	392
	393
[503]	394	# CHECK IF MAKEFILE EXITS
[1]	395	[[ "$makefile" = "" ]] && makefile=$local_source_path/Makefile
	396	if [[ ! -f $makefile ]]
	397	then
	398	printf "\n +++ makefile: "
	399	printf "\n $makefile"
	400	printf "\n does not exist"
	401	locat=makefile; exit
	402	fi
	403
	404
[503]	405	# HEADER-OUTPUT (PART1: MESSAGES CONCERNING THE LOCAL HOST)
[1]	406	calltime=$(date)
	407	printf "\n"
	408	printf "#------------------------------------------------------------------------# \n"
	409	printf "\| $version$calltime \| \n"
	410	printf "\| \| \n"
	411	column1="called on:"; column2=$local_host_real_name
	412	printf "\| $column1$column2 \| \n"
	413	column1="local username:"; column2=$local_username
	414	printf "\| $column1$column2 \| \n"
	415	column1="local IP-addres:"; column2=$local_addres
	416	printf "\| $column1$column2 \| \n"
	417	column1="config file:"; column2=$config_file
	418	printf "\| $column1$column2 \| \n"
	419	column1="makefile:"; column2=$makefile
	420	printf "\| $column1$column2 \| \n"
	421	column1="local source path:"; column2=$local_source_path
	422	printf "\| $column1$column2 \| \n"
	423	printf "#------------------------------------------------------------------------# \n"
	424
	425	# printf "\| \| \n"
	426
	427
[40]	428	if [[ $compile_utility_programs = false ]]
	429	then
[1]	430
[503]	431	# IN ANY CASE, GIVE ALL FILES WRITE-PERMIT, IN ORDER TO AVOID PROBLEMS
	432	# WITH OVERWRITING FILES ON THE REMOTE HOST
[215]	433	cd $local_source_path
	434	printf "\n\n *** tar of makefile and source files in $local_source_path"
[40]	435	tar -cf ${mainprog}_sources.tar Makefile *.$suf
	436	printf "\n"
[1]	437
[807]	438	else
	439	cd $local_source_path
	440	printf "\n\n *** tar of makefile and source files in $local_source_path"
	441
	442	cat Makefile_check\|while read line
	443	do
	444	line=$(echo $line\|grep RCS)
	445	if [[ $line == "RCS" ]]
	446	then
	447	line=$(echo $line\|sed 's/RCS = //g')
	448	break
	449	fi
	450	done
	451
	452	tar -cf ${mainprog}_sources_check.tar Makefile_check $line
	453	printf "\n"
[40]	454	fi
[1]	455
	456
[40]	457
[503]	458	# GET CONFIRMATION TO CONTINUE
[1]	459	if [[ $host = all ]]
	460	then
	461	printf "\n *** updates will be made for ALL hosts found in"
	462	printf "\n the configuration file"
	463	else
	464	printf "\n *** update will be made for host \"$host\" "
	465	fi
	466
	467	if [[ $silent = false ]]
	468	then
	469	answer=dummy
	470	printf "\n\n"
	471	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
	472	do
	473	printf " >>> continue (y/n) ? "
	474	read answer
	475	done
	476	if [[ $answer = n \|\| $answer = N ]]
	477	then
	478	locat=user_abort; exit
	479	fi
	480	fi
	481
	482
	483
	484
	485	# GENERIERUNG DER AKTUELLEN MODELLVERSION FUER ALLE RECHNER-/UEBERSETZUNGS-
	486	# VERSIONEN, DIE IN DER KONFIGURATIONSDATEI GEFUNDEN WERDEN
	487	printf "\n *** scanning configuration file for host(s) ..."
	488
[215]	489	grep %fopts $config_file > $tmp_mbuild
[69]	490	while read line
[1]	491	do
	492	# KOMMENTARZEILEN UEBERSPRINGEN
	493	[[ $(echo $line \| cut -c1) = "#" ]] && continue
	494	(( ihost = ihost + 1 ))
	495	hostline[$ihost]="$line"
[215]	496	done < $tmp_mbuild
[1]	497
	498
	499	while (( ih < ihost ))
	500	do
	501
	502	(( ih = ih + 1 ))
	503
[936]	504	# determine remote host and conditions for the respective block
	505	# continue, only if this host has been chosen via -h option and if
	506	# conditions have been chosen via -K option
[1]	507	remote_host_string=`echo ${hostline[$ih]} \| cut -d" " -s -f3-`
	508	remote_host=`echo $remote_host_string \| cut -d" " -f1`
	509	if [[ $host != all ]]
	510	then
	511	[[ $remote_host != $host ]] && continue
	512	fi
	513	host_found=true
	514	condition1=`echo $remote_host_string \| cut -d" " -s -f2`
	515	if [[ $condition1 = $remote_host ]]
	516	then
	517	condition1=""
	518	else
	519	condition2=`echo $remote_host_string \| cut -d" " -s -f3`
	520	fi
	521
[936]	522	if [[ $block_conditions != none ]]
	523	then
	524	if [[ "$condition1" != "$block_condition1" \|\| "$condition2" != "$block_condition2" ]]
	525	then
	526	continue
	527	fi
	528	block_conditions_found=true
	529	fi
	530
[493]	531	modules=""
[82]	532	netcdf_inc=""
	533	netcdf_lib=""
[784]	534	make_options=""
[1]	535
	536	# IP-ADRESSE DES REMOTE-RECHNERS BESTIMMEN
	537	case $remote_host in
[980]	538	(lckordi) remote_adress=210.219.61.8;;
[116]	539	(lcmuk) remote_addres=130.75.105.2;;
[622]	540	(lcrte) remote_addres=133.5.185.60;;
[1021]	541	(lcsb) remote_adress=147.46.30.151;;
[181]	542	(lcsgib) remote_addres=130.73.232.102;;
[740]	543	(lcsgih) remote_addres=130.75.4.101;;
[367]	544	(lck) remote_addres=165.132.26.61;;
[1040]	545	(lckiaps) remote_addres=118.128.66.223;;
[635]	546	(lctit) remote_addres=10.1.6.170;;
[892]	547	(lcxe6) remote_addres=129.177.20.113;;
[437]	548	(lcxt5m) remote_addres=193.166.211.144;;
[83]	549	(decalpha) remote_addres=165.132.26.56;;
[305]	550	(ibmh) remote_addres=136.172.40.15;;
[693]	551	(ibmkisti) remote_addres=150.183.146.24;;
[622]	552	(ibmku) remote_addres=133.5.4.129;;
[83]	553	(ibms) remote_addres=150.183.5.101;;
	554	(ibmy) remote_addres=165.132.26.58;;
	555	(nech) remote_addres=136.172.44.192;;
	556	(neck) remote_addres=133.5.178.11;;
	557	(ground.yonsei.ac.kr) remote_addres=134.75.155.33;;
	558	(*) if [[ $local_host != $remote_host ]]
[1]	559	then
[83]	560	printf "\n +++ remote host \"$remote_host\" unknown";
[503]	561	printf "\n please inform PALM group support!"
[1040]	562	locat=remote_host; exit
[1]	563	fi;;
	564	esac
	565
	566
	567	# REMOTE-USERNAMEN ERMITTELN
	568	line=""
[116]	569	found=false
[215]	570	grep "$remote_host_string" $config_file \| grep "%remote_username" > $tmp_mbuild
[69]	571	while read line1
[1]	572	do
[116]	573
[1]	574	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	575	then
	576	line="$line1"
	577	fi
[116]	578
	579	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	580	then
	581	remote_username=`echo $line \| cut -d" " -s -f2`
	582	found=true
	583	fi
	584
[215]	585	done < $tmp_mbuild
[1]	586
[116]	587	if [[ $found = false ]]
[1]	588	then
	589	printf "\n +++ no remote username found in configuration file"
	590	printf "\n for \"$remote_host_string\" "
	591	locat=config_file; exit
	592	fi
	593
	594
	595	# REMOTE-QUELLTEXTPFAD ERMITTELN
	596	line=""
[54]	597	remote_source_path=""
[215]	598	grep "$remote_host_string" $config_file \| grep "%source_path" > $tmp_mbuild
[69]	599	while read line1
[1]	600	do
[116]	601
[1]	602	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	603	then
	604	line="$line1"
	605	fi
[116]	606
	607	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	608	then
	609	remote_source_path=`echo $line \| cut -d" " -s -f2`
	610	fi
	611
[215]	612	done < $tmp_mbuild
[1]	613
	614	if [[ "$remote_source_path" = "" ]]
	615	then
	616	if [[ "$global_source_path" != "" ]]
	617	then
	618	remote_source_path=$global_source_path
	619	else
	620	printf "\n +++ no source path found in configuration file"
	621	printf "\n for \"$remote_host_string\" "
	622	locat=config_file; exit
	623	fi
	624	fi
	625
[22]	626	remote_ud=${remote_source_path}/../UTIL
[24]	627	remote_ud=$(eval echo $remote_ud)
[1]	628
[54]	629
[1]	630	# REMOTE-PFAD FUER MAKE-DEPOSITORY ERMITTELN
[54]	631	remote_md=""
[1]	632	line=""
[215]	633	grep "$remote_host_string" $config_file \| grep "%depository_path" > $tmp_mbuild
[69]	634	while read line1
[1]	635	do
[116]	636
[1]	637	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	638	then
	639	line="$line1"
	640	fi
[116]	641
	642	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	643	then
	644	remote_md=`echo $line \| cut -d" " -s -f2`
	645	fi
	646
[215]	647	done < $tmp_mbuild
[1]	648
	649	if [[ "$remote_md" = "" ]]
	650	then
	651	if [[ "$global_depository_path" != "" ]]
	652	then
	653	remote_md=$global_depository_path
	654	else
	655	printf "\n +++ no depository path found in configuration file"
	656	printf "\n for \"$remote_host_string\" "
	657	printf "\n please set \"\%depository_path\" in configuration file"
	658	locat=config_file; exit
	659	fi
	660	fi
	661
[8]	662	remote_md=$(eval echo $remote_md)
[503]	663	block=""
	664	[[ "$condition1" != "" ]] && block=_$condition1
	665	[[ "$condition2" != "" ]] && block=${block}_$condition2
[508]	666	remote_md=${remote_md}$block
[1]	667
[8]	668
[1]	669	# COMPILERNAMEN ERMITTELN
	670	line=""
[116]	671	found=false
[215]	672	grep "$remote_host_string" $config_file \| grep "%compiler_name " > $tmp_mbuild
[69]	673	while read line1
[1]	674	do
[116]	675
[1]	676	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	677	then
	678	line="$line1"
	679	fi
[116]	680
	681	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	682	then
	683	compiler_name=`echo $line \| cut -d" " -s -f2`
	684	found=true
	685	fi
	686
[215]	687	done < $tmp_mbuild
[1]	688
[116]	689	if [[ $found = false ]]
[1]	690	then
	691	printf "\n +++ no compiler name found in configuration file"
	692	printf "\n for \"$remote_host_string\" "
	693	locat=config_file; exit
	694	fi
	695
	696
[27]	697	# BEI BENUTZUNG EINES PARALLELEN COMPILERS MUSS AUCH EIN
	698	# SERIELLER COMPILERNAME ERMITTELT WERDEN
	699	if [[ $(echo $remote_host_string \| grep -c parallel) = 1 ]]
	700	then
	701	line=""
[116]	702	found=false
[215]	703	grep "$remote_host_string" $config_file \| grep "%compiler_name_ser" > $tmp_mbuild
[69]	704	while read line1
[27]	705	do
[116]	706
[27]	707	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	708	then
	709	line="$line1"
	710	fi
[116]	711
	712	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	713	then
	714	compiler_name_ser=`echo $line \| cut -d" " -s -f2`
	715	found=true
	716	fi
	717
[215]	718	done < $tmp_mbuild
[1]	719
[116]	720	if [[ $found = false ]]
[27]	721	then
[28]	722	printf "\n +++ no serial compiler name found in configuration file"
[27]	723	printf "\n for \"$remote_host_string\" "
	724	locat=config_file; exit
	725	fi
	726	else
	727	compiler_name_ser=$compiler_name
	728	fi
	729
	730
	731
[82]	732	# PRAEPROZESSOR-OPTIONEN/DIREKTIVEN ERMITTELN
	733	line=""
[116]	734	found=false
[215]	735	grep "$remote_host_string" $config_file \| grep "%cpp_options" > $tmp_mbuild
[82]	736	while read line1
	737	do
[116]	738
[82]	739	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	740	then
	741	line="$line1"
	742	fi
[116]	743
	744	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	745	then
	746	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
	747	cpp_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	748	found=true
	749	fi
	750
[215]	751	done < $tmp_mbuild
[116]	752
	753	if [[ $found = false ]]
[82]	754	then
	755	printf "\n +++ no preprocessor options found in configuration file"
	756	printf "\n for \"$remote_host_string\" "
	757	locat=config_file; exit
	758	fi
	759
[116]	760
[82]	761	# RECHNERSPEZIFISCHE CPP-DIREKTIVEN HINZUFUEGEN
	762	for string in $remote_host_string
	763	do
	764	if [[ $(echo $remote_host \| cut -c1-2) = lc && $(echo $string \| cut -c1-2) = lc ]]
	765	then
	766	cpp_options="$cpp_options -D__lc "
[83]	767	elif [[ $(echo $remote_host \| cut -c1-3) = ibm && $(echo $string \| cut -c1-3) = ibm ]]
	768	then
	769	cpp_options="${cpp_options},-D__ibm"
	770	elif [[ $(echo $remote_host \| cut -c1-3) = nec && $(echo $string \| cut -c1-3) = nec ]]
	771	then
	772	cpp_options="${cpp_options} -D__nec"
[82]	773	else
[83]	774	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
	775	then
	776	cpp_options="${cpp_options},-D__$string"
	777	else
	778	cpp_options="$cpp_options -D__$string "
	779	fi
[82]	780	fi
	781	done
	782
	783
	784
	785	# NETCDF-OPTIONEN ERMITTELN
	786	line=""
[215]	787	grep "$remote_host_string" $config_file \| grep "%netcdf_inc" > $tmp_mbuild
[82]	788	while read line1
	789	do
[116]	790
[82]	791	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	792	then
	793	line="$line1"
	794	fi
[116]	795
	796	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	797	then
	798	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
	799	netcdf_inc=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	800	fi
	801
[215]	802	done < $tmp_mbuild
[82]	803
	804	line=""
[215]	805	grep "$remote_host_string" $config_file \| grep "%netcdf_lib" > $tmp_mbuild
[82]	806	while read line1
	807	do
[116]	808
[82]	809	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	810	then
	811	line="$line1"
	812	fi
[116]	813
	814	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	815	then
	816	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
	817	netcdf_lib=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	818	fi
	819
[215]	820	done < $tmp_mbuild
[82]	821
	822
	823
[475]	824	# get make options
	825	line=""
	826	found=false
	827	grep "$remote_host_string" $config_file \| grep "%mopts" > $tmp_mbuild
	828	while read line1
	829	do
	830
	831	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	832	then
	833	line="$line1"
	834	fi
	835
	836	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	837	then
	838	# remove colons from directive string
	839	make_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	840
	841	fi
	842
	843	done < $tmp_mbuild
	844
	845
	846
[1]	847	# COMPILEROPTIONEN ERMITTELN
	848	line=""
[116]	849	found=false
[215]	850	grep "$remote_host_string" $config_file \| grep "%fopts" > $tmp_mbuild
[69]	851	while read line1
[1]	852	do
[116]	853
[1]	854	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	855	then
	856	line="$line1"
	857	fi
[116]	858
	859	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	860	then
	861	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
	862	compiler_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	863	found=true
	864
	865	# NETCDF-INCLUDEVERZEICHNIS HINZUFUEGEN
	866	compiler_options="$compiler_options $netcdf_inc"
	867	fi
	868
[215]	869	done < $tmp_mbuild
[116]	870
	871	if [[ $found = false ]]
[1]	872	then
	873	printf "\n +++ no compiler options found in configuration file"
	874	printf "\n for \"$remote_host_string\" "
	875	locat=config_file; exit
	876	fi
[82]	877
[1]	878
[892]	879	# get login init commands, "::" is replacing a space
	880	line=""
	881	grep "$remote_host_string" $config_file \| grep "%login_init_cmd" > $tmp_mbuild
	882	while read line1
	883	do
[1]	884
[892]	885	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	886	then
	887	line="$line1"
	888	fi
	889
	890	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	891	then
	892	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
	893	init_cmds=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	894	fi
	895	init_cmds="${init_cmds};"
	896	done < $tmp_mbuild
	897
	898
[503]	899	# get modules to be loaded
[221]	900	line=""
[493]	901	grep "$remote_host_string" $config_file \| grep "%modules" > $tmp_mbuild
[221]	902	while read line1
	903	do
	904
	905	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	906	then
	907	line="$line1"
	908	fi
	909
	910	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	911	then
	912	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
[493]	913	modules=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
[221]	914	fi
	915
	916	done < $tmp_mbuild
	917
	918
[1]	919	# LADER-OPTIONEN ERMITTELN
	920	line=""
[116]	921	found=false
[215]	922	grep "$remote_host_string" $config_file \| grep "%lopts" > $tmp_mbuild
[69]	923	while read line1
[1]	924	do
[116]	925
[1]	926	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	927	then
	928	line="$line1"
	929	fi
[116]	930
	931	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	932	then
	933	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
	934	loader_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	935	found=true
	936
	937	# NETCDF-LIBRARY HINZUFUEGEN
	938	loader_options="$loader_options $netcdf_lib"
	939	fi
	940
[215]	941	done < $tmp_mbuild
[1]	942
[116]	943	if [[ $found = false ]]
[1]	944	then
	945	printf "\n +++ no loader options found in configuration file"
	946	printf "\n for \"$remote_host_string\" "
	947	locat=config_file; exit
	948	fi
[82]	949
[1]	950
	951	printf "\n\n#------------------------------------------------------------------------# \n"
	952	if [[ $remote_host = $local_host ]]
	953	then
	954	column1="remote_host:"; column2="$remote_host (= local host!)"
	955	else
	956	column1="remote_host:"; column2=$remote_host
	957	fi
	958	printf "\| $column1$column2 \| \n"
	959	printf "\| \| \n"
	960	column1="conditions:"; column2="$condition1 $condition2"
	961	printf "\| $column1$column2 \| \n"
	962	column1="make depository:"; column2=$remote_md
	963	printf "\| $column1$column2 \| \n"
[215]	964	line=$(echo "$remote_md" \| cut -c51-)
	965	while [[ "$line" != "" ]]
	966	do
	967	column1=""
	968	column2=$line
	969	printf "\| $column1$column2 \| \n"
	970	line=$(echo "$line" \| cut -c51-)
	971	done
[25]	972	if [[ $compile_utility_programs = true ]]
	973	then
	974	column1="utility directory:"; column2=$remote_ud
	975	printf "\| $column1$column2 \| \n"
	976	fi
[1]	977	column1="username:"; column2=$remote_username
	978	printf "\| $column1$column2 \| \n"
	979	column1="addres:"; column2=$remote_addres
	980	printf "\| $column1$column2 \| \n"
	981	column1="compiler:"; column2=$compiler_name
	982	printf "\| $column1$column2 \| \n"
[28]	983	if [[ $compile_utility_programs = true ]]
	984	then
	985	column1="serial compiler:"; column2=$compiler_name_ser
	986	printf "\| $column1$column2 \| \n"
	987	fi
[475]	988	if [[ "$make_options" != "" ]]
	989	then
	990	column1="make options:"; column2=$make_options
	991	printf "\| $column1$column2 \| \n"
	992	fi
[1]	993	column1="cpp options:"; column2=$cpp_options
	994	printf "\| $column1$column2 \| \n"
	995	line=$(echo "$cpp_options" \| cut -c51-)
	996	while [[ "$line" != "" ]]
	997	do
	998	column1=""
	999	column2=$line
	1000	printf "\| $column1$column2 \| \n"
	1001	line=$(echo "$line" \| cut -c51-)
	1002	done
	1003	column1="compiler options:"; column2=$compiler_options
	1004	printf "\| $column1$column2 \| \n"
	1005	line=$(echo "$compiler_options" \| cut -c51-)
	1006	while [[ "$line" != "" ]]
	1007	do
	1008	column1=""
	1009	column2=$line
	1010	printf "\| $column1$column2 \| \n"
	1011	line=$(echo "$line" \| cut -c51-)
	1012	done
	1013	column1="loader options:"; column2=$loader_options
	1014	printf "\| $column1$column2 \| \n"
	1015	line=$(echo "$loader_options" \| cut -c51-)
	1016	while [[ "$line" != "" ]]
	1017	do
	1018	column1=""
	1019	column2=$line
	1020	printf "\| $column1$column2 \| \n"
	1021	line=$(echo "$line" \| cut -c51-)
	1022	done
[493]	1023	if [[ $modules != "" ]]
	1024	then
	1025	column1="modules to be load:"; column2=$modules
	1026	printf "\| $column1$column2 \| \n"
	1027	line=$(echo "$modules" \| cut -c51-)
	1028	while [[ "$line" != "" ]]
	1029	do
	1030	column1=""
	1031	column2=$line
	1032	printf "\| $column1$column2 \| \n"
	1033	line=$(echo "$line" \| cut -c51-)
	1034	done
	1035	fi
[1]	1036	printf "#------------------------------------------------------------------------# \n"
	1037
	1038	if [[ $silent = false ]]
	1039	then
	1040	answer=dummy
	1041	printf "\n\n"
	1042	while [[ "$answer" != y && "$answer" != Y && "$answer" != c && "$answer" != C && "$answer" != s && "$answer" != S && "$answer" != a && "$answer" != A ]]
	1043	do
	1044	printf " >>> continue (y(es)/c(ontinue)/a(bort)/s(skip)) ? "
	1045	read answer
	1046	done
	1047	if [[ $answer = a \|\| $answer = A ]]
	1048	then
	1049	locat=user_abort; exit
	1050	fi
	1051	if [[ $answer = c \|\| $answer = C ]]
	1052	then
[503]	1053	silent=true
[1]	1054	fi
	1055	if [[ $answer = s \|\| $answer = S ]]
	1056	then
	1057	continue
	1058	fi
	1059	fi
	1060
	1061
[475]	1062	# make on remote host
	1063	if [[ $remote_host != $local_host ]]
[1]	1064	then
[475]	1065	if [[ $compile_utility_programs = false ]]
[1]	1066	then
	1067
[475]	1068	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
	1069	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
	1070	echo " *** copying \"${mainprog}_sources.tar\" to \"${remote_addres}:${remote_md}/\" "
	1071	if [[ $remote_host != lctit ]]
	1072	then
	1073	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})"
	1074	else
	1075	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
	1076	# MIT SSH, DESHALB AUFRUF PER PIPE
	1077	print "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})" \| ssh ${remote_username}@${remote_addres} 2>&1
	1078	fi
	1079	if [[ $local_host = decalpha ]]
	1080	then
	1081	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
	1082	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
	1083	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
	1084	remote_md=`echo $remote_md \| sed 's/\$HOME\///'`
	1085	/bin/scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
	1086	else
	1087	scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
	1088	fi
[1]	1089
	1090
	1091
[475]	1092	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
	1093	echo " *** untar previous update on remote host, if existing"
	1094	if [[ $remote_host != lctit ]]
	1095	then
	1096	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar"
	1097	else
	1098	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
	1099	# MIT SSH, DESHALB AUFRUF PER PIPE
	1100	print "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
	1101	fi
[1]	1102
	1103
[475]	1104	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
	1105	echo " *** untar actual sources on remote host"
	1106	if [[ $remote_host != lctit ]]
	1107	then
	1108	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; tar -xf ${mainprog}_sources.tar"
	1109	else
	1110	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
	1111	# MIT SSH, DESHALB AUFRUF PER PIPE
	1112	print "cd ${remote_md}; tar -xf ${mainprog}_sources.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
	1113	fi
[1]	1114
	1115
[475]	1116	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
	1117	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
	1118	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
	1119	# Z.B. DIE PFADE ZUM COMPILER)
	1120	echo " *** execute \"make\" on remote host"
[1]	1121
[493]	1122
	1123	# generate make call with make options
[475]	1124	if [[ $remote_host = nech ]]
	1125	then
	1126	make_call_string="sxmake $make_options PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
	1127	else
	1128	make_call_string="make $make_options PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
	1129	fi
[1]	1130
[493]	1131	# generate command to load modules, if modules are given
	1132	if [[ "$modules" != "" ]]
	1133	then
[678]	1134	if [[ $remote_host = lctit ]]
	1135	then
	1136	module_calls=". $modules"
	1137	else
	1138	module_calls="module load ${modules};"
	1139	fi
[555]	1140
	1141	# bugfix for wrong netcdf module
	1142	if [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
	1143	then
	1144	if [[ $(echo $module_calls \| grep -c netcdf/3.6.3-intel) != 0 ]]
	1145	then
	1146	module_calls="$module_calls export LD_LIBRARY_PATH=/sw/dataformats/netcdf/3.6.3-intel/lib:\$LD_LIBRARY_PATH;"
	1147	fi
	1148	fi
[503]	1149	else
	1150	module_calls=""
[493]	1151	fi
	1152
[693]	1153	if [[ $remote_host = ibmkisti \|\| $remote_host = ibms \|\| $remote_host = ibmy ]]
[475]	1154	then
[1]	1155
[892]	1156	ssh ${remote_username}@${remote_addres} "$init_cmds $module_calls cd ${remote_md}; echo '$make_call_string' > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1157
[475]	1158	elif [[ $remote_host = ibmh ]]
	1159	then
[1]	1160
[892]	1161	print "$init_cmds $module_calls export OBJECT_MODE=64; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1162
[475]	1163	elif [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
	1164	then
[622]	1165	# print ". /usr/share/modules/init/bash; $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[892]	1166	print "$init_cmds $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1167
[475]	1168	elif [[ $remote_host = lctit ]]
	1169	then
[1]	1170
[475]	1171	echo " " > ${remote_host}_last_make_protokoll
	1172	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
	1173	do
	1174	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
	1175	done
[1]	1176
[892]	1177	elif [[ $remote_host = lcxe6 ]]
[1]	1178	then
	1179
[892]	1180	ssh ${remote_username}@${remote_addres} "$init_cmds $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1181
[475]	1182	else
[1]	1183
[892]	1184	print "$init_cmds $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1185
[475]	1186	fi
[1]	1187
[475]	1188	if [[ $(grep -c MAKE_ERROR ${remote_host}_last_make_protokoll) != 0 ]]
	1189	then
	1190	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
	1191	if [[ $silent = false ]]
[40]	1192	then
[475]	1193	answer=dummy
	1194	printf "\n"
	1195	while [[ "$answer" != c && "$answer" != k ]]
[40]	1196	do
[475]	1197	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
	1198	read answer
	1199	if [[ "$answer" = l ]]
	1200	then
	1201	more ${remote_host}_last_make_protokoll
	1202	fi
[40]	1203	done
[475]	1204	if [[ $answer = k ]]
[40]	1205	then
[475]	1206	locat=user_abort; exit
[1]	1207	fi
	1208	fi
[475]	1209	fi
[1]	1210
	1211
	1212
[475]	1213	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
	1214	printf "\n *** tar update on remote host ..."
	1215	if [[ $remote_host != lctit ]]
	1216	then
	1217	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod"
	1218	else
	1219	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
	1220	# MIT SSH, DESHALB AUFRUF PER PIPE
	1221	print "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod" \| ssh ${remote_username}@${remote_addres} 2>&1
	1222	fi
[1]	1223
	1224
[475]	1225	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
	1226	# printf "\n *** \"make clean\" on remote host ..."
	1227	# ssh ${remote_username}@${remote_addres} "cd ${remote_md}; make clean; rm ${mainprog}_sources.tar; rm *.f90 Makefile"
	1228	# printf "\n"
[1]	1229
	1230
[25]	1231
	1232
[475]	1233	# GLEICHE AKTIONEN FUER DIE UTILITY-PROGRAMME DURCHFUEHREN
	1234	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
	1235	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
	1236	elif [[ $compile_utility_programs = true ]]
	1237	then
	1238
	1239	printf "\n\n"
	1240	echo " *** copying scripts and utility programs to \"${remote_addres}:${remote_ud}/\" "
	1241	cd ${local_source_path}/../SCRIPTS
	1242
	1243	if [[ $remote_host != lctit ]]
[22]	1244	then
[475]	1245	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)"
	1246	else
[503]	1247	# TIT ERLAUBT NUR DIE AUSFUEHRUNG GANZ BESTIMMTER KOMMANDOS
[475]	1248	# MIT SSH, DESHALB AUFRUF PER PIPE
	1249	print "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)" \| ssh ${remote_username}@${remote_addres} 2>&1
	1250	fi
[22]	1251
[475]	1252	# KOPIEREN DER SCRIPTE
	1253	if [[ $local_host = decalpha ]]
	1254	then
[503]	1255	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTAENDIGEN PFADES
[475]	1256	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
	1257	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
	1258	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
	1259	/bin/scp batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
	1260	else
	1261	scp batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
	1262	fi
[22]	1263
[475]	1264	cd - > /dev/null
	1265	cd ${local_source_path}/../UTIL
[22]	1266
[27]	1267
[475]	1268	# KOPIEREN DER UTILITY-PROGRAMME
	1269	if [[ $local_host = decalpha ]]
	1270	then
	1271	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
	1272	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
	1273	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
	1274	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
	1275	/bin/scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
	1276	else
	1277	scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
	1278	fi
[27]	1279
	1280
[22]	1281
[475]	1282	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
	1283	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
	1284	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
	1285	# Z.B. DIE PFADE ZUM COMPILER)
	1286	echo " *** execute \"make\" on remote host"
[22]	1287
[475]	1288	if [[ $remote_host = nech ]]
	1289	then
[503]	1290	make_call_string="sxmake $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
[475]	1291	else
[503]	1292	make_call_string="make $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
[475]	1293	fi
[22]	1294
[493]	1295	# generate command to load modules, if modules are given
	1296	if [[ "$modules" != "" ]]
	1297	then
[678]	1298	if [[ $remote_host = lctit ]]
	1299	then
	1300	module_calls=". $modules"
	1301	else
	1302	module_calls="module load ${modules};"
	1303	fi
[562]	1304
	1305	# bugfix for wrong netcdf module
	1306	if [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
	1307	then
	1308	if [[ $(echo $module_calls \| grep -c netcdf/3.6.3-intel) != 0 ]]
	1309	then
	1310	module_calls="$module_calls export LD_LIBRARY_PATH=/sw/dataformats/netcdf/3.6.3-intel/lib:\$LD_LIBRARY_PATH;"
	1311	fi
	1312	fi
[503]	1313	else
	1314	module_calls=""
[493]	1315	fi
	1316
[892]	1317
[475]	1318	if [[ $remote_host = ibms \|\| $remote_host = ibmy ]]
	1319	then
[22]	1320
[892]	1321	ssh ${remote_username}@${remote_addres} "$init_cmds $module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR"
[22]	1322
[475]	1323	elif [[ $remote_host = ibmh ]]
	1324	then
[22]	1325
[892]	1326	print "$init_cmds $module_calls export OBJECT_MODE=64; cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres}
[22]	1327
[475]	1328	elif [[ $remote_host = lctit ]]
	1329	then
[22]	1330
[475]	1331	echo " " > ${remote_host}_last_make_protokoll
	1332	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
	1333	do
[892]	1334	print "$init_cmds $module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[475]	1335	done
[22]	1336
[892]	1337	elif [[ $remote_host = lcxe6 ]]
[475]	1338	then
[22]	1339
[892]	1340	ssh ${remote_username}@${remote_addres} "$init_cmds $module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
[22]	1341
[475]	1342	else
[407]	1343
[892]	1344	print "$init_cmds $module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[407]	1345
[475]	1346	fi
[22]	1347
[475]	1348	fi # ENDE UEBERSETZUNG DER UTILITY-PROGRAMME
[22]	1349
[475]	1350	rm -rf ${remote_host}_last_make_protokoll
[22]	1351
[475]	1352	# make on local host
	1353	else
[22]	1354
[892]	1355	# workaround for lcxe6
	1356	if [[ $remote_host = lcxe6 ]]
[544]	1357	then
[920]	1358
	1359	eval $init_cmds
	1360
[544]	1361	fi
	1362
	1363	# first load modules, if given
	1364	if [[ "$modules" != "" ]]
	1365	then
[678]	1366	if [[ $remote_host = lctit ]]
	1367	then
	1368	. $modules
	1369	else
	1370	module load ${modules}
	1371	fi
[544]	1372	fi
	1373
	1374
[475]	1375	if [[ $compile_utility_programs = false ]]
	1376	then
[22]	1377
[475]	1378	# DEPOSITORY VERZEICHNIS ERZEUGEN, FALLS NOCH NICHT VORHANDEN
	1379	eval remote_md=$remote_md
	1380	if [[ ! -d $remote_md ]]
[40]	1381	then
[475]	1382	if mkdir $remote_md
[215]	1383	then
[475]	1384	printf "\n\n *** directory for make depository:"
	1385	printf "\n $remote_md"
	1386	printf "\n was created\n"
	1387	else
	1388	printf "\n +++ directory for make depository:"
	1389	printf "\n $remote_md"
	1390	printf "\n cannot be created"
	1391	locat=local_depository_path; exit
[215]	1392	fi
[475]	1393	fi
[215]	1394
[475]	1395	# QUELLTEXT-DATEIEN AUS REPOSITORY INS DEPOSITORY KOPIEREN
	1396	echo " "
	1397	echo " *** updating sources in $remote_md"
	1398	cd $remote_md
	1399	cp $local_source_path/${mainprog}_sources.tar .
	1400	tar xf ${mainprog}_sources.tar
[215]	1401
[475]	1402	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF LOKALEM RECHNER AUSFUEHREN
	1403	echo " "
	1404	echo " *** execute \"make\" on local host"
[1]	1405
[475]	1406	make $make_options PROG=$mainprog F90=$compiler_name COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options" 2>&1 \| tee ${remote_host}_last_make_protokoll
[40]	1407
[475]	1408	if [[ $? != 0 ]]
	1409	then
	1410	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
	1411	if [[ $silent = false ]]
[1]	1412	then
[475]	1413	answer=dummy
	1414	printf "\n"
	1415	while [[ "$answer" != c && "$answer" != k ]]
	1416	do
	1417	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
	1418	read answer
	1419	if [[ "$answer" = l ]]
[1]	1420	then
[475]	1421	more ${remote_host}_last_make_protokoll
[1]	1422	fi
[475]	1423	done
	1424	if [[ $answer = k ]]
	1425	then
	1426	locat=user_abort; exit
[1]	1427	fi
	1428	fi
[475]	1429	fi
[1]	1430
	1431
[503]	1432	# TAR NEW VERSION ON LOCAL HOST
[475]	1433	printf "\n *** tar update on local host ..."
	1434	tar -cf ${mainprog}_current_version.tar .$suf .o *.mod
[1]	1435
[22]	1436
[475]	1437	# COMPILE THE UTILITY PROGRAMS
	1438	elif [[ $compile_utility_programs = true ]]
	1439	then
	1440	printf "\n\n"
	1441	echo " *** compiling the utility programs ..."
	1442	cd ${local_source_path}/../UTIL
[503]	1443
	1444	# TOUCH FILES IN ORDER TO FORCE COMPILATION FOR EVERY BLOCK
	1445	touch *.f90
	1446	make $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options"
[793]	1447
[807]	1448	# CHECK IF QMAKE IS AVAILABLE AND COMPILE MRUNGUI
[811]	1449	if [[ $util_compiled_localhost == false ]]
	1450	then
	1451	printf "\n\n"
	1452	echo " *** compiling the mrun GUI"
	1453	if which qmake >/dev/null; then
	1454	cd mrungui
	1455	touch *
	1456	qmake
	1457	make
	1458	make clean
	1459	rm Makefile
	1460	cd ..
	1461	else
	1462	echo " +++ no qmake found. The (optional) GUI will not be compiled."
	1463	fi
[793]	1464
[811]	1465	# COMPILE CHECK_NAMELIST_FILES (ONLY FOR ONE BRANCH on LOCALHOST NEEDED)
[793]	1466
[811]	1467	printf "\n\n"
	1468	echo " *** compiling check_namelist_files ..."
[807]	1469
[892]	1470	# GET CHECK OPTIONS
	1471	line=""
	1472	found=false
	1473	grep "$remote_host_string" $config_file \| grep "%cpp_options" > $tmp_mbuild
	1474	while read line1
	1475	do
	1476
	1477	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	1478	then
	1479	line="$line1"
	1480	fi
	1481
	1482	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	1483	then
	1484	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING UND ALLE -D ENTFERNEN
	1485	line="$line "
	1486	copts_check=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g' \| sed 's/-D[^ ]* //g' \| sed 's/ -D.*//g'`
	1487	found=true
	1488	fi
	1489
	1490	done < $tmp_mbuild
	1491	copts_check="$copts_check -D__check -D__parallel"
	1492
[811]	1493	check_depository_path=${local_source_path}/../UTIL
	1494	cd $check_depository_path
	1495	mkdir check_tmp
	1496	cp ${local_source_path}/${mainprog}_sources_check.tar ./check_tmp
	1497	cd check_tmp
	1498	tar -xf ${mainprog}_sources_check.tar
	1499	rm -rf ${mainprog}_sources_check.tar
[807]	1500
[1018]	1501	make -f Makefile_check $make_options F90=$compiler_name_ser COPT="$copts_check" F90FLAGS="$compiler_options"
[811]	1502	tar -cf check_namelist_files.tar Makefile_check check_namelist_files.x .f90 .o *.mod
	1503	mv check_namelist_files.tar $check_depository_path
	1504	mv check_namelist_files.x $PALM_BIN
	1505	cd $check_depository_path
	1506	rm -rf check_tmp
	1507	util_compiled_localhost=true
	1508	else
	1509	cd $check_depository_path
	1510	printf "\n\n"
[818]	1511	echo " *** skipped compilation of mrun GUI."
[811]	1512	printf "\n\n"
	1513	echo " *** skipped compilation of check_namelist_files."
	1514	fi
	1515
[1]	1516	fi
	1517	fi
	1518	done
	1519
	1520
	1521	if [[ $host_found = false ]]
	1522	then
	1523	if [[ $host = all ]]
	1524	then
	1525	printf "\n +++ no hosts found in configuration file"
	1526	else
	1527	printf "\n +++ host \"$host\" not found in configuration file"
	1528	fi
	1529	locat=config_file; exit
	1530	fi
	1531
[936]	1532	if [[ "$block_conditions" != none && $block_conditions_found = false ]]
	1533	then
	1534	printf "\n +++ block conditions \"$block_conditions\" not found for host \"$host\""
	1535	fi
[1]	1536
	1537
[503]	1538	# FINAL WORK
[1]	1539	rm -f hosts_found_in_config_file
[811]	1540	rm -f ${local_source_path}/${mainprog}_sources_check.tar
[1]	1541

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |