Home

Context Navigation

source: palm/trunk/DOC/app/chapter_3.4.html @ 153

Last change on this file since 153 was 134, checked in by letzel, 17 years ago
Redefine initial nzb_local as the actual total size of topography (later the extent of topography in nzb_local is reduced by 1dx at the E topography walls and by 1dy at the N topography walls to form the basis for nzb_s_inner); for consistency redefine 'single_building' case.
Property svn:keywords set to `Id`
File size: 107.9 KB

Rev	Line
[134]	1	<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
	2	<html><head>
	3
	4
	5
	6	<meta content="text/html; charset=ISO-8859-1" http-equiv="content-type">
	7
	8
	9	<title>PALM chapter 3.4</title></head>
	10
	11	<body>
	12
	13
	14	<h3 style="line-height: 100%;"><font color="#000000">3.4
	15	Input and
	16	output files</font></h3>
	17
	18
	19	<p style="line-height: 100%;"></p>
	20
	21
	22	<p style="line-height: 100%;"><font color="#000000">The
	23	model works
	24	with a set of files, which are all located in the temporary working
	25	directory and which are either expected at the beginning of the run
	26	(the so-called input files) or which are
	27	produced during the run and/or at the end of the simulation (output
	28	files).</font><font color="#800000">
	29	<font color="#000000">The following table lists all
	30	default files
	31	addressed by the model. They are arranged according to the
	32	associated FORTRAN unit (unit number).</font> </font><font color="#000000">The
	33	unit 90 is used for different files, which are opened only briefly
	34	and uniquely in the model and closed directly afterwards.
	35	Unit numbers 101 - 109, 111 - 113, and 116 refer to data files
	36	which have NetCDF format.
	37	These are not opened by a FORTRAN-OPEN-statement but by a corresponding
	38	NetCDF call (NF90_CREATE or NF90_OPEN). These files are only created on
	39	machines where a NetCDF library is available.<br>
	40
	41
	42	</font></p>
	43
	44
	45	<p style="line-height: 100%;"><font color="#000000">The
	46	file
	47	names described in the list correspond to the names indicated in the
	48	respective OPEN instruction, i.e. the files are expected and saved
	49	under these names in the temporary working directory of the model. By
	50	default, file names are always written in capital letters. The
	51	third column indicates whether it is an input or output file (I
	52	and/or O). The NetCDF files can be both input and output files (I/O).
	53	If restart jobs shall append data to an existing NetCDF file (created
	54	by a previous job of the job chain), the respective file has to be
	55	given as an input file (see also <a href="../app/chapter_4.5.1.html">chapter
	56	4.5.1</a> which gives more details about the PALM-NetCDF-output).</font>
	57	</p>
	58
	59
	60	<p style="line-height: 100%;"> </p>
	61
	62
	63	<p style="line-height: 100%;"><font color="#000000">On
	64	parallel
	65	computers many of the files are read and/or written by the central
	66	processing element 0 (PE0) only. These files have processor-independent
	67	content (and therefore they can be read or written by other
	68	PEs just as well). However, certain files have processor-dependent
	69	content. For the binary output of data for restart runs (local file
	70	<a href="#BINOUT">BINOUT</a>),
	71	for example, <font color="#000000">each PE outputs only
	72	the data of
	73	its subdomain. So each processing element writes
	74	into its own file with its own file name. These files lie in a
	75	subdirectory of the temporary working directory. Their names are build
	76	off from the underline ("_ ") and the four digit
	77	processor ID. The data written for restart runs would be e.g. on the
	78	files BINOUT/_0000 (PE0), BINOUT/_0001 (PE1), BINOUT/_0002 (PE2) etc.
	79	Such files, which have processor-dependent content on parallel
	80	computers, are marked in the following list by the fact, that to the
	81	file name a line (”/“) is attached. If appropriate
	82	output
	83	files are to be copied through <b>mrun</b> to permanent
	84	files, and/or
	85	files with processor-dependent content are supposed to be copied as
	86	input files into the temporary working directory of the model, you have
	87	to indicate a special file attribute in the appropriate file
	88	connection statement </font>(see <a href="http://www.muk.uni-hannover.de/institut/software/mrun_beschreibung.html#arpe">arpe</a>,
	89	<a href="http://www.muk.uni-hannover.de/institut/software/mrun_beschreibung.html#flpe">flpe</a>
	90	<font color="#000000">in the <b>mrun </b>description).</font><font color="#800000">
	91	</font><font color="#000000">Then the permanent file
	92	name will be
	93	interpreted as a directory name, in which the input files are
	94	expected and/or to which output files are written. The file names in
	95	these directories are always named _0000, _0001, _0002 etc. </font>
	96	</font></p>
	97
	98
	99	<p><font color="#000000"><font color="#000000">For
	100	internal use,
	101	the model may open a set of further files, which are not
	102	defined by the user but contain no usable information and
	103	therefore are not included in this list.</font></font></p>
	104	<p><font color="#000000"><font color="#000000">
	105
	106	<a name="coupled"></a>In case of <a href="chapter_3.8.html">coupled</a> atmosphere-ocean
	107	runs (see <a href="chapter_3.8.html">chapter 3.8</a>),
	108	both the atmosphere and the </font></font><font color="#000000"><font color="#000000"><a href="chapter_4.1.html#ocean">ocean</a> executable use
	109	the same temporary working directory. However, each executable requires its own, unique set of files for I/O. In order to
	110	distinguish between atmosphere and ocean files, coupled </font></font><font color="#000000"><font color="#000000">atmosphere-ocean
	111	</font></font><font color="#000000"><font color="#000000">runs use the </font></font><font color="#000000"><font color="#000000">following
	112	filename convention</font></font><font color="#000000"><font color="#000000">. </font></font><font color="#000000"><font color="#000000">The
	113	atmosphere executable uses the set of normal filenames given in the
	114	table below. The ocean executable uses a set of modified filenames that
	115	have the string '_O' added to their normal name. The coupled
	116	ocean filenames are given in brackets in the table below where
	117	applicable. The string '_O' is simply appended </font></font><font color="#000000"><font color="#000000">to most
	118	filenames</font></font><font color="#000000"><font color="#000000">; exceptions are highlighted in bold face. (<span style="font-weight: bold;">Note:</span> uncoupled
	119	ocean runs use the normal set of filenames without '_O'.)</font></font></p>
	120	<p></p>
	121	<font color="#000000"><font color="#000000">
	122
	123	<br>
	124
	125
	126	</font>
	127	<table style="text-align: left; width: 100%;" border="1" cellpadding="2" cellspacing="2">
	128
	129
	130	<tbody>
	131
	132
	133	<tr valign="top">
	134
	135
	136	<td width="8%">
	137
	138	<p><font size="4"><b>Unit</b></font></p>
	139
	140
	141	</td>
	142
	143
	144	<td width="12%">
	145
	146	<p><font size="4"><b>Name</b></font></p>
	147
	148
	149	</td>
	150
	151
	152	<td width="4%">
	153
	154	<p><font size="4"><b>I/O</b></font></p>
	155
	156
	157	</td>
	158
	159
	160	<td width="9%">
	161
	162	<p><font size="4"><b>Format</b></font></p>
	163
	164
	165	</td>
	166
	167
	168	<td colspan="1" width="67%">
	169
	170	<p><font size="4"><b>Description/contents</b></font></p>
	171
	172
	173	</td>
	174
	175
	176	</tr>
	177
	178
	179	<tr valign="top">
	180
	181
	182	<td style="text-align: center;" width="8%"> 11<br>
	183
	184
	185	</td>
	186
	187
	188	<td width="12%">
	189
	190	<p><a name="PARIN"></a>PARIN<br>
	191
	192
	193	(PARIN_O)</p>
	194
	195
	196	</td>
	197
	198
	199	<td width="4%">
	200
	201	<p align="center">I</p>
	202
	203
	204	</td>
	205
	206
	207	<td style="width: 9%;">
	208
	209	<p>ASCII/  <br>
	210
	211
	212	NAMELIST</p>
	213
	214
	215	</td>
	216
	217
	218	<td colspan="1" width="67%">
	219
	220	<p><font color="#000000">Parameter
	221	for model steering. This file
	222	is needed by the model in each case. Its content and structure is
	223	described in detail in</font> <a href="chapter_4.0.html">chapter
	224	4.0</a>. <a href="chapter_4.4.1.html">Chapter
	225	4.4.1</a> <font color="#000000">shows a simple
	226	example. </font> </p>
	227
	228
	229	</td>
	230
	231
	232	</tr>
	233
	234
	235	<tr valign="top">
	236
	237
	238	<td style="text-align: center;" width="8%">
	239
	240	<p align="center">13</p>
	241
	242
	243	</td>
	244
	245
	246	<td width="12%">
	247
	248	<p><a name="BININ"></a>BININ/<br>
	249
	250
	251	(BININ<span style="font-weight: bold;">_O</span>/)</p>
	252
	253
	254	</td>
	255
	256
	257	<td width="4%">
	258
	259	<p align="center">I</p>
	260
	261
	262	</td>
	263
	264
	265	<td width="9%">
	266
	267	<p>Binary</p>
	268
	269
	270	</td>
	271
	272
	273	<td colspan="1" width="67%">
	274
	275	<p>Binary data,
	276	which are read in by the model at the beginning
	277	of a restart run (see <a href="chapter_3.3.html">chapter
	278	3.3</a>). The appropriate file must have been written by the
	279	preceding
	280	job of the job chain (see <a href="#BINOUT">BINOUT</a>).
	281	This file contains the initial parameters (see <a href="chapter_4.1.html">chapter
	282	4.1</a>) of the job chain, arrays of the prognostic and
	283	diagnostic
	284	variables as well as those parameters and variables for plots of
	285	horizontally averaged vertical profiles (see <a href="chapter_4.2.html#data_output_pr">data_output_pr</a>),
	286	which have been determined by the job chain so far. Concerning runs on
	287	several processors it has to be noted that each processing element
	288	reads its own file and the file content is processor-dependent. The
	289	number of processors which can be used must not be changed during a job
	290	chain and/or if a job chain is continued.  </p>
	291
	292
	293
	294	<p>Knowledge
	295	of the file structure is usually not necessary,
	296	because the file is produced and also read again by the model, but it
	297	can be useful for error determination in case of read errors .
	298	Therefore the file structure is described in the following.  </p>
	299
	300
	301
	302	<p>The first record of this file contains a version number
	303	(ten
	304	character string) of the subroutine, which, which output the data that
	305	follows (write_var_list.f90). This number has to
	306	agree with the version number subroutine which is reading the file
	307	(read_var_list.f90) in case of a restart run. Otherwise the model run
	308	is aborted. Version numbers are changed whenever new code revisions
	309	require a change of the file format.  </p>
	310
	311
	312
	313	<p>Starting
	314	from the second record, all initial parameters follow
	315	(exception: <a href="chapter_4.1.html#initializing_actions">initializing_actions</a>),
	316	whereby each parameter fills two records. In the first record the name
	317	of the parameter is saved as a character string (30 characters long,
	318	short names are filled by trailing blanks, longer names are cut off at
	319	the end), in the second record the value (or the values) of the
	320	parameter follow. The sequence of parameters on the file may be
	321	arbitrary, however the first and second variable must be <a href="chapter_4.1.html#nz">nz</a>
	322	and <a href="chapter_4.1.html#statistic_regions">statistic_regions</a>.
	323	If a variable with unknown name is found the model run is
	324	aborted.  </p>
	325
	326
	327
	328	<p>At the end of the initial
	329	parameters a record with the string "<i>***
	330	end ***</i>"follows (filled up with trailing blanks up to a
	331	length of
	332	30 characters).  </p>
	333
	334
	335
	336	<p>Afterwards the fields
	337	of the prognostic and diagnostic
	338	variables follow. This part of the file also begins with a record
	339	consisting of a character string of length 10, which contains the
	340	version number of the subroutine that wrote the arrays that follow
	341	(write_3d_binary.f90). It must agree with the number of the reading
	342	subroutine (read_3d_binary.f90).  </p>
	343
	344
	345
	346	<p>The
	347	following record contains the number of processors which
	348	were used in the model run producing this file, the processor ID of the
	349	special processor, which creates the file, as well as the lower and
	350	upper array indices of the subdomain belonging to this processing
	351	element. If no complete agreement with the values of the current model
	352	run exists, then this is aborted. This examination must be made in
	353	particular on parallel computers, because the jobs of a job chain
	354	always have to use the same number of processors and the same virtual
	355	processor grid.  </p>
	356
	357
	358
	359	<p>After these tests the
	360	individual arrays as well as parameters
	361	and variables for plots of horizontally averaged vertical profiles
	362	follow. Like the initialization parameters, they consist of two
	363	records. In the first record, the name of the array or the variable
	364	(character string, consisting of 20 characters, filled with trailing
	365	blanks) is located, in the second one its values follow. The sequence
	366	of the individual variables may be arbitrary again. The parameters for
	367	the plot and the respective variables are only read in if for the run
	368	parameter <a href="chapter_4.2.html#use_prior_plot1d_parameters">use_prior_plot1d_parameters</a>
	369	= <i>.TRUE</i> is selected, otherwise they will be
	370	skipped.  </p>
	371
	372
	373
	374	<p>At the end of the file there
	375	has to be a record with the
	376	character string "<span style="font-style: italic;"></span><i>***
	377	end
	378	***</i>"(filled up with trailing blanks up to a length of 20
	379	characters).</p>
	380
	381
	382	</td>
	383
	384
	385	</tr>
	386
	387
	388	<tr valign="top">
	389
	390
	391	<td style="text-align: center;" width="8%">
	392
	393	<p align="center">14</p>
	394
	395
	396	</td>
	397
	398
	399	<td width="12%">
	400
	401	<p><a name="BINOUT"></a>BINOUT/<br>
	402
	403
	404	(BINOUT<span style="font-weight: bold;">_O</span>/)</p>
	405
	406
	407	</td>
	408
	409
	410	<td width="4%">
	411
	412	<p align="center">O</p>
	413
	414
	415	</td>
	416
	417
	418	<td width="9%">
	419
	420	<p>Binary</p>
	421
	422
	423	</td>
	424
	425
	426	<td colspan="1" width="67%">
	427
	428	<p>Binary data,
	429	which are written by the model at the end of the
	430	run and possibly needed by restart runs (see <a href="chapter_3.3.html">chapter
	431	3.3</a>) for the initialization. This output file is then read in
	432	as
	433	file <a href="#BININ">BININ</a>.
	434	It contains the initial parameters (see <a href="chapter_4.1.html">chapter
	435	4.1</a>) of the model run, arrays of the prognostic and
	436	diagnostic
	437	variables as well as those parameters determined so far during a job
	438	chain and variables for plots of horizontally averaged vertical
	439	profiles (see <a href="chapter_4.2.html#data_output_pr">data_output_pr</a>).
	440	With runs on several processors it has to be noted that each processing
	441	element writes its own file and the file content is
	442	processor-dependent. A specification of the file format can be found in
	443	the
	444	description of the file <a href="#BININ">BININ</a>.
	445	</p>
	446
	447
	448
	449	<p>The file BINOUT is written by the model only if,
	450	with the help
	451	of the <b>mrun</b>-configuration file, the <font face="Thorndale, serif">value</font> <span style="font-family: monospace;">true</span> is
	452	assigned for the
	453	environment
	454	variable <span style="font-size: 10pt; font-family: monospace;">write_binary</span>
	455	(see <a href="chapter_3.3.html">chapter
	456	3.3</a>).  </p>
	457
	458
	459
	460	<p>With large grid point
	461	numbers the file BINOUT (or the
	462	files residing in directory BINOUT/) will be very large and should
	463	be stored (if available) on the archive system of the remote computer.</p>
	464
	465
	466	</td>
	467
	468
	469	</tr>
	470
	471
	472	<tr>
	473
	474
	475	<td style="vertical-align: top; text-align: center;">15<br>
	476
	477
	478	</td>
	479
	480
	481	<td style="vertical-align: top;"><a name="RUN_CONTROL"></a>RUN_CONTROL<br>
	482
	483
	484	(RUN_CONTROL_O)</td>
	485
	486
	487	<td style="vertical-align: top;">O</td>
	488
	489
	490	<td style="vertical-align: top;">Ascii</td>
	491
	492
	493	<td colspan="1" width="67%">
	494
	495	<p>This file contains
	496	the so-called time step control output of
	497	the model. At certain temporal intervals, which are described by the
	498	run
	499	parameter <a href="chapter_4.1.html#dt_run_control">dt_run_control</a>,
	500	a line with the values of certain control parameters is written into
	501	this
	502	file. Additionally, such a control line is always written, whenever the
	503	time step of the model changes. All data and quantities always refer to
	504	the entire model domain.  </p>
	505
	506
	507
	508	<p>If the
	509	1D-model is switched on for the initialization of the
	510	3D-models, then control lines are likewise written into this file at
	511	certain temporal intervals (see <a href="chapter_4.1.html#dt_run_control_1d">dt_run_control_1d</a>).
	512	</p>
	513
	514
	515
	516	<p>By default, the file RUN_CONTROL only lists
	517	information
	518	about the selected model parameters at the beginning of the
	519	initial run. These informations are written at the beginnning of a run.
	520	They correspond to those of the file <a href="#HEADER">HEADER</a>
	521	(however without data concerning the consumed CPU time, because these
	522	are
	523	only known at the end of a run). With the run parameter <a href="chapter_4.2.html#force_print_header">force_print_header</a>
	524	it can be achieved that this information is also written at the
	525	beginning of the file RUN_CONTROL at restart runs.  </p>
	526
	527
	528
	529	<p>The individual columns of the 1D - time step control
	530	output
	531	have the following meaning (listed by the respective heading of the
	532	appropriate
	533	column in the file):  <br>
	534
	535
	536	</p>
	537
	538
	539
	540	<table style="text-align: left; width: 100%;" cellpadding="2">
	541
	542
	543	<tbody>
	544
	545
	546	<tr>
	547
	548
	549	<td style="vertical-align: top;">ITER.</td>
	550
	551
	552	<td style="vertical-align: top;">Number of
	553	time steps
	554	accomplished so far</td>
	555
	556
	557	</tr>
	558
	559
	560	<tr>
	561
	562
	563	<td style="vertical-align: top;">HH:MM:SS</td>
	564
	565
	566	<td style="vertical-align: top;">Time (in
	567	hours: minutes:
	568	seconds)</td>
	569
	570
	571	</tr>
	572
	573
	574	<tr>
	575
	576
	577	<td style="vertical-align: top;">DT</td>
	578
	579
	580	<td style="vertical-align: top;">Time step (in
	581	s)</td>
	582
	583
	584	</tr>
	585
	586
	587	<tr>
	588
	589
	590	<td style="vertical-align: top;">UMAX</td>
	591
	592
	593	<td style="vertical-align: top;">Maximum
	594	absolute wind
	595	velocity
	596	(u-component) (in m/s)</td>
	597
	598
	599	</tr>
	600
	601
	602	<tr>
	603
	604
	605	<td style="vertical-align: top;">VMAX</td>
	606
	607
	608	<td style="vertical-align: top;">Maximum
	609	absolute wind
	610	velocity
	611	(v-component) (in m/s)</td>
	612
	613
	614	</tr>
	615
	616
	617	<tr>
	618
	619
	620	<td style="vertical-align: top;">U *</td>
	621
	622
	623	<td style="vertical-align: top;">Friction
	624	velocity (<font color="#000000">in </font>m/s)</td>
	625
	626
	627	</tr>
	628
	629
	630	<tr>
	631
	632
	633	<td style="vertical-align: top;">ALPHA</td>
	634
	635
	636	<td style="vertical-align: top;">Angle of the
	637	wind vector
	638	(to the x-axis) at the top of the
	639	Prandtl layer (k=1) (<font color="#000000">in </font>degrees)</td>
	640
	641
	642	</tr>
	643
	644
	645	<tr>
	646
	647
	648	<td style="vertical-align: middle;">ENERG.</td>
	649
	650
	651	<td style="vertical-align: top;">Kinetic
	652	energy of the
	653	1D-model (<font color="#000000">in </font>m<sup>2</sup>/s<sup>2</sup>),
	654	averaged over all grid points</td>
	655
	656
	657	</tr>
	658
	659
	660
	661	</tbody>
	662
	663	</table>
	664
	665
	666
	667	<p>
	668	The individual columns of the 3D - time step control output
	669	have the following meaning (listed by the respective heading of the
	670	appropriate
	671	column in the file):<br>
	672
	673
	674	</p>
	675
	676
	677
	678	<table style="text-align: left; width: 100%;" cellpadding="2">
	679
	680
	681	<tbody>
	682
	683
	684	<tr>
	685
	686
	687	<td style="vertical-align: top;">RUN</td>
	688
	689
	690	<td style="vertical-align: top;">Serial-number
	691	of the job
	692	in the job chain. The initial
	693	run has the number 0, restart runs accordingly have larger numbers.</td>
	694
	695
	696	</tr>
	697
	698
	699	<tr>
	700
	701
	702	<td style="vertical-align: top;">ITER.</td>
	703
	704
	705	<td style="vertical-align: top;">Number of
	706	time steps
	707	accomplished since starting time t=0 of
	708	the initial run.</td>
	709
	710
	711	</tr>
	712
	713
	714	<tr>
	715
	716
	717	<td style="vertical-align: top;">HH:MM:SS</td>
	718
	719
	720	<td style="vertical-align: top;">Time (<font color="#000000">in </font>hours: minutes:
	721	seconds) since starting time t=0 of the
	722	initial run.</td>
	723
	724
	725	</tr>
	726
	727
	728	<tr>
	729
	730
	731	<td style="vertical-align: top;">DT (E)</td>
	732
	733
	734	<td style="vertical-align: top;">Time step (<font color="#000000">in </font>s). The
	735	following character indicates whether the
	736	time
	737	step is limited by the advection criterion (A) or the diffusion
	738	criterion (D). After changes of the time step a further character
	739	follows,
	740	which indicates with which time step procedure the changed time step
	741	was accomplished (<span style="font-family: monospace;">L:</span>
	742	Leapfrog, <span style="font-family: monospace;">E:</span>
	743	Euler). This
	744	does
	745	not apply for the default Runge-Kutta timestep scheme.</td>
	746
	747
	748	</tr>
	749
	750
	751	<tr>
	752
	753
	754	<td style="vertical-align: top;">UMAX</td>
	755
	756
	757	<td style="vertical-align: top;">Maximum
	758	absolute wind
	759	velocity (u-component) (<font color="#000000">in </font>m/s).
	760	If at
	761	the
	762	appropriate output time a random disturbance was added to the
	763	horizontal velocity field (see <a href="chapter_4.2.html#create_disturbances">create_disturbances</a>),
	764	the character D will appear directly after the velocity value.</td>
	765
	766
	767	</tr>
	768
	769
	770	<tr>
	771
	772
	773	<td style="vertical-align: top;">VMAX</td>
	774
	775
	776	<td style="vertical-align: top;">Maximum
	777	absolute wind
	778	velocity (v-component) (<font color="#000000">in </font>m/s).
	779	If at
	780	the
	781	appropriate output time a random disturbance was added to the
	782	horizontal velocity field (see <a href="chapter_4.2.html#create_disturbances">create_disturbances</a>),
	783	the character D will appear directly after the velocity value.</td>
	784
	785
	786	</tr>
	787
	788
	789	<tr>
	790
	791
	792	<td style="vertical-align: top;">WMAX</td>
	793
	794
	795	<td style="vertical-align: top;">Maximum
	796	absolute wind
	797	velocity (w-component) (<font color="#000000">in </font>m/s).</td>
	798
	799
	800	</tr>
	801
	802
	803	<tr>
	804
	805
	806	<td style="vertical-align: top;">U
	807	*</td>
	808
	809
	810	<td style="vertical-align: top;">Horizontal
	811	average of the
	812	friction velocity (<font color="#000000">in </font>m/s).</td>
	813
	814
	815	</tr>
	816
	817
	818	<tr>
	819
	820
	821	<td style="vertical-align: top;">W
	822	*</td>
	823
	824
	825	<td style="vertical-align: top;">Convective
	826	velocity scale
	827	(<font color="#000000">in </font>m/s). The assumed
	828	boundary layer
	829	height is determined via the heat flux minimum criterion.</td>
	830
	831
	832	</tr>
	833
	834
	835	<tr>
	836
	837
	838	<td style="vertical-align: top;">THETA *</td>
	839
	840
	841	<td style="vertical-align: top;">Characteristic
	842	temperature
	843	of the Prandtl - layer (<font color="#000000">in </font>K).</td>
	844
	845
	846	</tr>
	847
	848
	849	<tr>
	850
	851
	852	<td style="vertical-align: top;">Z_I</td>
	853
	854
	855	<td style="vertical-align: top;">Height of the
	856	convective
	857	boundary layer (<font color="#000000">in </font>m),
	858	determined via
	859	the criterion of the heat flux minimum.</td>
	860
	861
	862	</tr>
	863
	864
	865	<tr>
	866
	867
	868	<td style="vertical-align: middle;">ENERG.</td>
	869
	870
	871	<td style="vertical-align: top;">Average
	872	resolved total
	873	energy of the flow field (<font color="#000000">in </font>m<sup>2</sup>/s<sup>2</sup>),
	874	normalized with the total number of grid points.</td>
	875
	876
	877	</tr>
	878
	879
	880	<tr>
	881
	882
	883	<td style="vertical-align: middle;">DISTENERG</td>
	884
	885
	886	<td style="vertical-align: top;">Average
	887	resolved
	888	disturbance energy of flow field (<font color="#000000">in
	889	</font>m<sup>2</sup>/s<sup>2</sup>),
	890	normalized with the total number of grid points.</td>
	891
	892
	893	</tr>
	894
	895
	896	<tr>
	897
	898
	899	<td style="vertical-align: top;">DIVOLD</td>
	900
	901
	902	<td style="vertical-align: top;"><font color="#000000">Divergence
	903	of the velocity field (sum of
	904	the absolute values) (</font><font color="#000000">in
	905	</font><font color="#000000">1/s) before
	906	call of the
	907	pressure solver,
	908	normalized with the total number of grid points.</font></td>
	909
	910
	911	</tr>
	912
	913
	914	<tr>
	915
	916
	917	<td style="vertical-align: top;">DIVNEW</td>
	918
	919
	920	<td style="vertical-align: top;"><font color="#000000">Divergence
	921	of the velocity field (sum of
	922	the absolute values) (</font><font color="#000000">in
	923	</font><font color="#000000">1/s) after
	924	call of the
	925	pressure solver, normalized</font>
	926	with the total number of grid points.</td>
	927
	928
	929	</tr>
	930
	931
	932	<tr>
	933
	934
	935	<td style="vertical-align: top;">UMAX (KJI)</td>
	936
	937
	938	<td style="vertical-align: top;">Indices of
	939	the grid point
	940	with the maximum absolute
	941	u-component of the wind velocity (sequence: k, j, i).</td>
	942
	943
	944	</tr>
	945
	946
	947	<tr>
	948
	949
	950	<td style="vertical-align: top;">VMAX (KJI)</td>
	951
	952
	953	<td style="vertical-align: top;">Indices of
	954	the grid point
	955	with the maximum absolute
	956	v-component of the wind velocity (sequence: k, j, i).</td>
	957
	958
	959	</tr>
	960
	961
	962	<tr>
	963
	964
	965	<td style="vertical-align: top;">WMAX (KJI)</td>
	966
	967
	968	<td style="vertical-align: top;">Indices of
	969	the grid point
	970	with the maximum absolute
	971	w-component of the wind velocity (sequence: k, j, i).</td>
	972
	973
	974	</tr>
	975
	976
	977	<tr>
	978
	979
	980	<td style="vertical-align: top;">ADVECX</td>
	981
	982
	983	<td style="vertical-align: top;">Distance (<font color="#000000">in </font>km) the
	984	coordinate system has been moved in
	985	x-direction with Galilei-Transformation switched on (see <a href="chapter_4.1.html#galilei_transformation">galilei_transformation</a>).</td>
	986
	987
	988	</tr>
	989
	990
	991	<tr>
	992
	993
	994	<td style="vertical-align: top;">ADVECY</td>
	995
	996
	997	<td style="vertical-align: top;">Distance (<font color="#000000">in </font>km) the
	998	coordinate system has been moved in
	999	y-direction with Galilei-Transformation switched on (see <a href="chapter_4.1.html#galilei_transformation">galilei_transformation</a>).</td>
	1000
	1001
	1002	</tr>
	1003
	1004
	1005
	1006	</tbody>
	1007
	1008	</table>
	1009
	1010
	1011	</td>
	1012
	1013
	1014	</tr>
	1015
	1016
	1017	<tr>
	1018
	1019
	1020	<td style="vertical-align: top; text-align: center;">16<br>
	1021
	1022
	1023	</td>
	1024
	1025
	1026	<td style="vertical-align: top;"><a name="LIST_PROFIL"></a>LIST_PROFIL<br>
	1027
	1028
	1029	(LIST_PROFIL_O) </td>
	1030
	1031
	1032	<td style="vertical-align: top;">O<br>
	1033
	1034
	1035	</td>
	1036
	1037
	1038	<td style="vertical-align: top;">Ascii<br>
	1039
	1040
	1041	</td>
	1042
	1043
	1044	<td style="vertical-align: top;">This file contains
	1045	horizontally
	1046	(and possibly temporally)
	1047	averaged vertical profiles of some model variables. The quantities
	1048	saved are set model-internally and can not be determined by the user.
	1049	At each output time (see <a href="chapter_4.2.html#dt_dopr_listing">dt_dopr_listing</a>)
	1050	two tables are written to the file consecutively. The first contains
	1051	variables which are defined on the scalar / u-v-grid-levels, the
	1052	second table contains variables which are defined on the w-grid-levels.
	1053	If subdomains were defined with the initialization parameter <a href="chapter_4.1.html#statistic_regions">statistic_regions </a>for
	1054	additional statistic evaluation, then the tables
	1055	described above are written for each individual subdomain. The name of
	1056	the respective subdomain (see <a href="chapter_4.3.html#region">region</a>)
	1057	appears in the header of the respective table. <br>
	1058
	1059
	1060	In each case the tables consist of a header, followed by the
	1061	profiles arranged next to each other in columns. The header contains
	1062	some basic information of the respective run (model version, run
	1063	identifier consisting of
	1064	basic file name and number of the job in the job chain, executing
	1065	computer, date, time of the beginning of the run, name of the
	1066	subdomain, output time, kind of averaging). On the u-v-level the
	1067	following columns are written: <br>
	1068
	1069
	1070
	1071	<table style="text-align: left; width: 100%;" cellpadding="2">
	1072
	1073
	1074	<tbody>
	1075
	1076
	1077	<tr>
	1078
	1079
	1080	<td style="text-align: left; vertical-align: middle;">k<br>
	1081
	1082
	1083	</td>
	1084
	1085
	1086	<td style="text-align: left; vertical-align: middle;">Vertical
	1087	grid point index.</td>
	1088
	1089
	1090	</tr>
	1091
	1092
	1093	<tr>
	1094
	1095
	1096	<td style="text-align: left; vertical-align: middle;">zu<br>
	1097
	1098
	1099	</td>
	1100
	1101
	1102	<td style="text-align: left; vertical-align: middle;">Height
	1103	of the grid point
	1104	level (<font color="#000000">in </font>m).</td>
	1105
	1106
	1107	</tr>
	1108
	1109
	1110	<tr>
	1111
	1112
	1113	<td style="text-align: left; vertical-align: middle;">u<br>
	1114
	1115
	1116	</td>
	1117
	1118
	1119	<td style="text-align: left; vertical-align: middle;">u-component
	1120	of the wind
	1121	velocity (<font color="#000000">in </font>m/s).</td>
	1122
	1123
	1124	</tr>
	1125
	1126
	1127	<tr>
	1128
	1129
	1130	<td style="text-align: left; vertical-align: middle;">du<br>
	1131
	1132
	1133	</td>
	1134
	1135
	1136	<td style="text-align: left; vertical-align: middle;">Deviation
	1137	of the
	1138	u-component from the initial profile at the
	1139	time t=0 (initialization profile) (<font color="#000000">in
	1140	</font>m/s).</td>
	1141
	1142
	1143	</tr>
	1144
	1145
	1146	<tr>
	1147
	1148
	1149	<td style="text-align: left; vertical-align: middle;">v<br>
	1150
	1151
	1152	</td>
	1153
	1154
	1155	<td style="text-align: left; vertical-align: middle;">v-component
	1156	of the wind
	1157	velocity (<font color="#000000">in </font>m/s).</td>
	1158
	1159
	1160	</tr>
	1161
	1162
	1163	<tr>
	1164
	1165
	1166	<td style="text-align: left; vertical-align: middle;">dv<br>
	1167
	1168
	1169	</td>
	1170
	1171
	1172	<td style="text-align: left; vertical-align: middle;">Deviation
	1173	of the
	1174	v-component from the initial profile at the
	1175	time t=0 (initialization profile) (<font color="#000000">in
	1176	</font>m/s).</td>
	1177
	1178
	1179	</tr>
	1180
	1181
	1182	<tr>
	1183
	1184
	1185	<td style="text-align: left; vertical-align: middle;">pt
	1186	<br>
	1187
	1188
	1189	</td>
	1190
	1191
	1192	<td style="text-align: left; vertical-align: middle;">Potential
	1193	temperature (<font color="#000000">in </font>K).</td>
	1194
	1195
	1196	</tr>
	1197
	1198
	1199	<tr>
	1200
	1201
	1202	<td style="text-align: left; vertical-align: middle;">dpt<br>
	1203
	1204
	1205	</td>
	1206
	1207
	1208	<td style="text-align: left; vertical-align: middle;">Deviation
	1209	of potential
	1210	temperature from the initial profile at
	1211	the time t=0 (initialization profile) (<font color="#000000">in
	1212	</font>K).</td>
	1213
	1214
	1215	</tr>
	1216
	1217
	1218	<tr>
	1219
	1220
	1221	<td style="text-align: left; vertical-align: middle;">e<br>
	1222
	1223
	1224	</td>
	1225
	1226
	1227	<td style="text-align: left; vertical-align: middle;">Turbulent
	1228	kinetic energy
	1229	(subgrid-scale) (<font color="#000000">in </font>m<sup>2</sup>/s<sup>2</sup>).</td>
	1230
	1231
	1232	</tr>
	1233
	1234
	1235	<tr>
	1236
	1237
	1238	<td style="text-align: left; vertical-align: middle;">Km<br>
	1239
	1240
	1241	</td>
	1242
	1243
	1244	<td style="text-align: left; vertical-align: middle;">Turbulent
	1245	diffusion
	1246	coefficient for momentum (<font color="#000000">in </font>m<sup>2</sup>/s).</td>
	1247
	1248
	1249	</tr>
	1250
	1251
	1252	<tr>
	1253
	1254
	1255	<td style="text-align: left; vertical-align: middle;">Kh<br>
	1256
	1257
	1258	</td>
	1259
	1260
	1261	<td style="text-align: left; vertical-align: middle;">Turbulent
	1262	diffusion
	1263	coefficient for heat (<font color="#000000">in </font>m<sup>2</sup>/s).</td>
	1264
	1265
	1266	</tr>
	1267
	1268
	1269	<tr>
	1270
	1271
	1272	<td style="text-align: left; vertical-align: middle;">l<br>
	1273
	1274
	1275	</td>
	1276
	1277
	1278	<td style="text-align: left; vertical-align: middle;">Mixing
	1279	length (<font color="#000000">in </font>m).</td>
	1280
	1281
	1282	</tr>
	1283
	1284
	1285	<tr>
	1286
	1287
	1288	<td style="vertical-align: top;"><br>
	1289
	1290
	1291	</td>
	1292
	1293
	1294	<td style="vertical-align: top;"><br>
	1295
	1296
	1297	</td>
	1298
	1299
	1300	</tr>
	1301
	1302
	1303
	1304	</tbody>
	1305
	1306	</table>
	1307
	1308
	1309	On the w-level the following columns are written:<br>
	1310
	1311
	1312	<br>
	1313
	1314
	1315
	1316	<table style="text-align: left; width: 100%;" cellpadding="2">
	1317
	1318
	1319	<tbody>
	1320
	1321
	1322	<tr>
	1323
	1324
	1325	<td style="vertical-align: middle;">k<br>
	1326
	1327
	1328	</td>
	1329
	1330
	1331	<td style="vertical-align: middle;">Vertical
	1332	grid point
	1333	index.</td>
	1334
	1335
	1336	</tr>
	1337
	1338
	1339	<tr>
	1340
	1341
	1342	<td style="vertical-align: middle;">zw<br>
	1343
	1344
	1345	</td>
	1346
	1347
	1348	<td style="vertical-align: middle;">Height of
	1349	the grid
	1350	point
	1351	level (<font color="#000000">in </font>m).</td>
	1352
	1353
	1354	</tr>
	1355
	1356
	1357	<tr>
	1358
	1359
	1360	<td style="vertical-align: middle;">w'pt'</td>
	1361
	1362
	1363	<td style="vertical-align: middle;">Vertical
	1364	subgrid-scale
	1365	kinematic heat flux (<font color="#000000">in </font>K
	1366	m/s).</td>
	1367
	1368
	1369	</tr>
	1370
	1371
	1372	<tr>
	1373
	1374
	1375	<td style="vertical-align: middle;">wpt</td>
	1376
	1377
	1378	<td style="vertical-align: middle;">Vertical
	1379	total (
	1380	subgrid-scale + resolved)
	1381	kinematic heat flux (<font color="#000000">in </font>K
	1382	m/s).</td>
	1383
	1384
	1385	</tr>
	1386
	1387
	1388	<tr>
	1389
	1390
	1391	<td style="vertical-align: middle;">w'u'</td>
	1392
	1393
	1394	<td style="vertical-align: middle;">u-component
	1395	of the
	1396	vertical subgrid-scale momentum flux (<font color="#000000">in
	1397	</font>m<sup>2</sup>/s<sup>2</sup>).</td>
	1398
	1399
	1400	</tr>
	1401
	1402
	1403	<tr>
	1404
	1405
	1406	<td style="vertical-align: middle;">wu</td>
	1407
	1408
	1409	<td style="vertical-align: middle;">u-component
	1410	of the
	1411	total
	1412	vertical momentum flux (
	1413	subgrid-scale + resolved) (<font color="#000000">in </font>m<sup>2</sup>/s<sup>2</sup>).</td>
	1414
	1415
	1416	</tr>
	1417
	1418
	1419	<tr>
	1420
	1421
	1422	<td style="vertical-align: middle;">w'v'</td>
	1423
	1424
	1425	<td style="vertical-align: middle;">v-component
	1426	of the
	1427	vertical subgrid-scale momentum flux (<font color="#000000">in
	1428	</font>m<sup>2</sup>/s<sup>2</sup>).</td>
	1429
	1430
	1431	</tr>
	1432
	1433
	1434	<tr>
	1435
	1436
	1437	<td style="vertical-align: middle;">wv</td>
	1438
	1439
	1440	<td style="vertical-align: middle;">v-component
	1441	of the
	1442	total
	1443	vertical momentum flux (
	1444	subgrid-scale + resolved) (<font color="#000000">in </font>m<sup>2</sup>/s<sup>2</sup>).</td>
	1445
	1446
	1447	</tr>
	1448
	1449
	1450
	1451	</tbody>
	1452
	1453	</table>
	1454
	1455
	1456	<br>
	1457
	1458
	1459	</td>
	1460
	1461
	1462	</tr>
	1463
	1464
	1465	<tr>
	1466
	1467
	1468	<td style="vertical-align: top; text-align: center;">17
	1469	</td>
	1470
	1471
	1472	<td style="vertical-align: top;"><a name="LIST_PROFIL_1D"></a>LIST_PROFIL_1D<br>
	1473
	1474
	1475	(LIST_PROFIL_1D_O)</td>
	1476
	1477
	1478	<td style="vertical-align: top;">O </td>
	1479
	1480
	1481	<td style="vertical-align: top;">Ascii </td>
	1482
	1483
	1484	<td style="vertical-align: top;">This file contains
	1485	the vertical
	1486	profiles calculated by the
	1487	1D-model within initial runs. The quantities saved are set
	1488	model-internally and cannot be determined by the user. At the
	1489	respective output times (see <a href="chapter_4.1.html#dt_pr_1d">dt_pr_1d</a>)
	1490	a table with the following information is written to the file: The
	1491	table header contains some basic information of the respective run
	1492	(model version, run identifier consisting of basic file name and number
	1493	of the job in the
	1494	job chain (this number should always be 00, because the 1D-model is
	1495	only switched on at initial runs), executing computer, date,
	1496	time of the beginning of the run, output time). Afterwards the
	1497	following columns appear:<br>
	1498
	1499
	1500
	1501	<table style="text-align: left; width: 100%;" cellpadding="2">
	1502
	1503
	1504	<tbody>
	1505
	1506
	1507	<tr>
	1508
	1509
	1510	<td style="text-align: left; vertical-align: middle;">k<br>
	1511
	1512
	1513	</td>
	1514
	1515
	1516	<td style="text-align: left; vertical-align: middle;">Vertical
	1517	grid point index.</td>
	1518
	1519
	1520	</tr>
	1521
	1522
	1523	<tr>
	1524
	1525
	1526	<td style="text-align: left; vertical-align: middle;">zu<br>
	1527
	1528
	1529	</td>
	1530
	1531
	1532	<td style="text-align: left; vertical-align: middle;">Height
	1533	of the grid point
	1534	level (<font color="#000000">in </font>m).</td>
	1535
	1536
	1537	</tr>
	1538
	1539
	1540	<tr>
	1541
	1542
	1543	<td style="text-align: left; vertical-align: middle;">u<br>
	1544
	1545
	1546	</td>
	1547
	1548
	1549	<td style="text-align: left; vertical-align: middle;">u-component
	1550	of the wind
	1551	velocity (<font color="#000000">in </font>m/s).</td>
	1552
	1553
	1554	</tr>
	1555
	1556
	1557	<tr>
	1558
	1559
	1560	<td style="text-align: left; vertical-align: middle;">v<br>
	1561
	1562
	1563	</td>
	1564
	1565
	1566	<td style="text-align: left; vertical-align: middle;">v-component
	1567	of the wind
	1568	velocity (<font color="#000000">in </font>m/s).</td>
	1569
	1570
	1571	</tr>
	1572
	1573
	1574	<tr>
	1575
	1576
	1577	<td style="text-align: left; vertical-align: middle;">pt<br>
	1578
	1579
	1580	</td>
	1581
	1582
	1583	<td style="text-align: left; vertical-align: middle;">Potential
	1584	temperature (<font color="#000000">in </font>K).</td>
	1585
	1586
	1587	</tr>
	1588
	1589
	1590	<tr>
	1591
	1592
	1593	<td style="text-align: left; vertical-align: middle;">e<br>
	1594
	1595
	1596	</td>
	1597
	1598
	1599	<td style="text-align: left; vertical-align: middle;">Turbulent
	1600	kinetic energy (<font color="#000000">in </font>m<sup>2</sup>/s<sup>2</sup>).</td>
	1601
	1602
	1603	</tr>
	1604
	1605
	1606	<tr>
	1607
	1608
	1609	<td style="text-align: left; vertical-align: middle;">rif<br>
	1610
	1611
	1612	</td>
	1613
	1614
	1615	<td style="text-align: left; vertical-align: middle;">Flux
	1616	Richardson number</td>
	1617
	1618
	1619	</tr>
	1620
	1621
	1622	<tr>
	1623
	1624
	1625	<td style="text-align: left; vertical-align: middle;">Km<br>
	1626
	1627
	1628	</td>
	1629
	1630
	1631	<td style="text-align: left; vertical-align: middle;">Turbulent
	1632	diffusion
	1633	coefficient for momentum (<font color="#000000">in </font>m<sup>2</sup>/s).</td>
	1634
	1635
	1636	</tr>
	1637
	1638
	1639	<tr>
	1640
	1641
	1642	<td style="text-align: left; vertical-align: middle;">Kh<br>
	1643
	1644
	1645	</td>
	1646
	1647
	1648	<td style="text-align: left; vertical-align: middle;">Turbulent
	1649	diffusion
	1650	coefficient for heat (<font color="#000000">in </font>m<sup>2</sup>/s).</td>
	1651
	1652
	1653	</tr>
	1654
	1655
	1656	<tr>
	1657
	1658
	1659	<td style="text-align: left; vertical-align: middle;">l<br>
	1660
	1661
	1662	</td>
	1663
	1664
	1665	<td style="text-align: left; vertical-align: middle;"><font color="#000000">Mixing
	1666	length (</font><font color="#000000">in </font><font color="#000000">m).</font></td>
	1667
	1668
	1669	</tr>
	1670
	1671
	1672
	1673	</tbody>
	1674
	1675	</table>
	1676
	1677
	1678	<br>
	1679
	1680
	1681	</td>
	1682
	1683
	1684	</tr>
	1685
	1686
	1687	<tr>
	1688
	1689
	1690	<td style="vertical-align: top; text-align: center;">18
	1691	</td>
	1692
	1693
	1694	<td style="vertical-align: top;"><a name="CPU_MEASURES"></a>CPU_MEASURES<br>
	1695
	1696
	1697	(CPU_MEASURES_O)</td>
	1698
	1699
	1700	<td style="vertical-align: top;">O </td>
	1701
	1702
	1703	<td style="vertical-align: top;">Ascii </td>
	1704
	1705
	1706	<td style="vertical-align: top;">Time measurements
	1707	are
	1708	accomplished through the subroutine <span style="font-family: monospace;">cpu_log.f90.</span><span style="font-size: 10pt;"></span> The file
	1709	CPU_MEASURES contains a header with some basic information of the
	1710	respective run
	1711	(model version, run identifier consisting of basic file name and
	1712	number of the job in the job chain, executing computer, date, time of
	1713	the beginning of the run) and afterwards two tables with data of CPU
	1714	times which have been consumed by certain model parts. The model parts
	1715	analyzed in the first table do not overlap and the CPU times needed for
	1716	them therefore approximately add up to the “total”
	1717	value given in the
	1718	first line of this table. In the second table (heading: special
	1719	measures) overlaps (in particular with the parts described in the first
	1720	table) are possible.  <br>
	1721
	1722
	1723	For each model part it is indicated in the following columns how much
	1724	CPU time was needed (absolutely and relative), and how often it was
	1725	called.  With runs on several processors the average values of
	1726	all
	1727	processors are indicated. In the case of parallel runs information for
	1728	those processors with the largest and smallest CPU time follow as
	1729	well as the standard deviation of all PEs from the average value. With
	1730	good
	1731	parallelization the CPU times on the individual processors should
	1732	differ only little from each other and the standard deviation should be
	1733	small.  </td>
	1734
	1735
	1736	</tr>
	1737
	1738
	1739	<tr>
	1740
	1741
	1742	<td style="vertical-align: top; text-align: center;">19
	1743	</td>
	1744
	1745
	1746	<td style="vertical-align: top;"><a name="HEADER"></a>HEADER<br>
	1747
	1748
	1749	(HEADER_O) </td>
	1750
	1751
	1752	<td style="vertical-align: top;">O </td>
	1753
	1754
	1755	<td style="vertical-align: top;">Ascii </td>
	1756
	1757
	1758	<td style="vertical-align: top;">
	1759
	1760	<p>Information about
	1761	the selected model parameters (physical and
	1762	numerical values) as well as general information about the
	1763	run.  </p>
	1764
	1765
	1766
	1767	<p>This file contains the values of
	1768	all important steering
	1769	parameters
	1770	(numerical procedures, computing grid and model dimensions, boundary
	1771	conditions, physical dimension, turbulence quantities, actions during
	1772	the simulation, 1D-model-parameters) as well as data concerning the
	1773	selected plot and list outputs. The headlines of the file list the
	1774	program version used, date and time of the beginning of the run, the
	1775	name of the executing computer, the run identifier (corresponds to the
	1776	selected base file name) and the number of the run (number of the
	1777	restart run). With parallel runs the number of processors as well as
	1778	the assigned virtual processor net also appear. After these headlines
	1779	run time and time step information appear (point of starting time,
	1780	related to t=0 of the initial run, end-time, time actually reached, CPU
	1781	time, etc.). If a model run is incorrectly terminated (e.g.
	1782	run time error or excess of the permitted CPU time), information over
	1783	the time reached and the necessary CPU time is missing (to understand:
	1784	the file HEADER is written twice by the model; once briefly after
	1785	beginning of the simulation (naturally here the information over the
	1786	time reached is missing etc.) and then briefly before the normal end of
	1787	the simulation. The second, now complete output overwrites the first
	1788	output.).  </p>
	1789
	1790
	1791
	1792	<p>At the end of the file,
	1793	information about the values of user
	1794	parameters (see <a href="chapter_3.7.html">chapter
	1795	3.7</a> and <a href="targetliste:chapter_1.0.html#chapter%204.3">chapter
	1796	4.3</a>) can be output by the user with the help of the
	1797	subroutine <tt><font style="font-size: 11pt;" size="2">user_header</font></tt>
	1798	(located in
	1799	the file <tt><font style="font-size: 10pt;" size="2">user_interface.f90</font></tt>).
	1800	If no user parameters were found, the string “<tt><font style="font-size: 10pt;" size="2">*** no user-defined
	1801	variables found</font></tt>”
	1802	appears at the end of the file.
	1803	If user parameters were indicated, the string “<tt><font style="font-size: 11pt;" size="2">user-defined
	1804	variables and actions</font></tt>”
	1805	is printed, followed by informations about the user-defined subdomains
	1806	for which
	1807	profiles and time series are output. All further information to appear
	1808	here, must be provided by the user (by appropriate
	1809	WRITE statements in <tt><font style="font-size: 10pt;" size="2">user_header</font></tt>).</p>
	1810
	1811
	1812	</td>
	1813
	1814
	1815	</tr>
	1816
	1817
	1818	<tr>
	1819
	1820
	1821	<td style="vertical-align: top; text-align: center;">21
	1822	</td>
	1823
	1824
	1825	<td style="vertical-align: top;"><a name="PLOT2D_XY"></a>PLOT2D_XY<br>
	1826
	1827
	1828	(PLOT2D_XY_O)</td>
	1829
	1830
	1831	<td style="vertical-align: top;">O<br>
	1832
	1833
	1834	</td>
	1835
	1836
	1837	<td style="vertical-align: top;">Binary<br>
	1838
	1839
	1840	</td>
	1841
	1842
	1843	<td style="vertical-align: top;">
	1844
	1845	<p>This file
	1846	contains data of the two-dimensional horizontal
	1847	cross sections written by the model (see <a href="chapter_4.2.html#data_output">data_output</a>)
	1848	in a format readable by <a href="http://www.muk.uni-hannover.de/institut/software/iso2d_beschreibung.html">ISO2D</a>
	1849	(the first record contains the coordinate information <tt><font style="font-size: 11pt;" size="2">dx</font></tt><font style="font-size: 11pt;" size="2">, </font><tt><font style="font-size: 11pt;" size="2">eta</font></tt><font style="font-size: 11pt;" size="2">, </font><tt><font style="font-size: 11pt;" size="2">hu</font></tt><font style="font-size: 11pt;" size="2">, <tt>ho</tt></font>,
	1850	then
	1851	the individual arrays follow). The data are visualized with the help of
	1852	ISO2D using
	1853	NAMELIST - parameter sets, which are directly written by the model to
	1854	the
	1855	local files <a href="#PLOT2D_XY_GLOBAL">PLOT2D_XY_GLOBAL</a>
	1856	and <a href="#PLOT2D_XY_LOCAL">PLOT2D_XY_LOCAL</a>.
	1857	</p>
	1858
	1859
	1860
	1861	<p>With parallel runs and choice of <a href="chapter_4.2.html#data_output_2d_on_each_pe">data_output_2d_on_each_pe</a>
	1862	= <i>.T.</i> each processing element writes the data of
	1863	its subdomain
	1864	to a separate file with the name
	1865	PLOT2D_XY_<processor-Id>,
	1866	whereby <processor-Id> is a four digit number (e.g.
	1867	PLOT2D_XY_0000). These files are not suitable for ISO2D, but after the
	1868	end
	1869	of the model run they can be combined to one file readable by ISO2D
	1870	with
	1871	the help of the program <tt><font style="font-size: 10pt;" size="2">combine_plot_fields.x</font></tt>.
	1872	This tool expects the files of the individual processing
	1873	elements under the names described above and outputs the combined file
	1874	under the name PLOT2D_XY. Usually it is called by an appropriate OUTPUT
	1875	- command (OC:) in the MRUN-configuration file. The tool writes
	1876	informative messages about the actions accomplished into the job
	1877	protocol (e.g., even if no files were found).
	1878	By the call of <tt><font style="font-size: 10pt;" size="2">combine_plot_fields.x</font></tt>
	1879	possibly existing files of the other cross sections (xz and/or yz)
	1880	and three-dimensional arrays (see <a href="#PLOT3D_DATA">PLOT3D_DATA</a>)
	1881	are also combined.  </p>
	1882
	1883
	1884
	1885	<p>Further information
	1886	about the output of plots of
	1887	two-dimensional cross sections is found in the description of the run
	1888	parameter <a href="chapter_4.2.html#data_output">data_output</a>.</p>
	1889
	1890
	1891	</td>
	1892
	1893
	1894	</tr>
	1895
	1896
	1897	<tr>
	1898
	1899
	1900	<td style="vertical-align: top; text-align: center;">22<br>
	1901
	1902
	1903	</td>
	1904
	1905
	1906	<td style="vertical-align: top;"><a name="PLOT2D_XZ"></a>PLOT2D_XZ<br>
	1907
	1908
	1909	(PLOT2D_XZ_O) </td>
	1910
	1911
	1912	<td style="vertical-align: top;">O<br>
	1913
	1914
	1915	</td>
	1916
	1917
	1918	<td style="vertical-align: top;">Binary<br>
	1919
	1920
	1921	</td>
	1922
	1923
	1924	<td style="vertical-align: top;">
	1925
	1926	<p>This file contains
	1927	the data of the xz
	1928	cross sections written by the model.  </p>
	1929
	1930
	1931	The description of the local file <a href="#PLOT2D_XY">PLOT2D_XY</a>
	1932	applies to this file, respectively </td>
	1933
	1934
	1935	</tr>
	1936
	1937
	1938	<tr>
	1939
	1940
	1941	<td style="vertical-align: top; text-align: center;">23<br>
	1942
	1943
	1944	</td>
	1945
	1946
	1947	<td style="vertical-align: top;"><a name="PLOT2D_YZ"></a>PLOT2D_YZ<br>
	1948
	1949
	1950	<font color="#000000">(PLOT2D_YZ_O)</font></td>
	1951
	1952
	1953	<td style="vertical-align: top;">O<br>
	1954
	1955
	1956	</td>
	1957
	1958
	1959	<td style="vertical-align: top;">Binary<br>
	1960
	1961
	1962	</td>
	1963
	1964
	1965	<td style="vertical-align: top;">
	1966
	1967	<p>This file contains
	1968	the data of the xz
	1969	cross sections written by the model.  </p>
	1970
	1971
	1972	The description of the local file <a href="#PLOT2D_XY">PLOT2D_XY</a>
	1973	applies to this file, respectively </td>
	1974
	1975
	1976	</tr>
	1977
	1978
	1979	<tr>
	1980
	1981
	1982	<td style="vertical-align: top; text-align: center;">27<br>
	1983
	1984
	1985	</td>
	1986
	1987
	1988	<td style="vertical-align: top;"><a name="PLOT2D_XY_LOCAL"></a>PLOT2D_XY_LOCAL<br>
	1989
	1990
	1991	(PLOT2D_XY_LOCAL_O)</td>
	1992
	1993
	1994	<td style="vertical-align: top;">O<br>
	1995
	1996
	1997	</td>
	1998
	1999
	2000	<td style="vertical-align: top;">Ascii/ NAMELIST<br>
	2001
	2002
	2003	</td>
	2004
	2005
	2006	<td style="vertical-align: top;">
	2007
	2008	<p>NAMELIST -
	2009	parameter sets, with which the plot layout of the
	2010	data in the local file <a href="#PLOT2D_XY">PLOT2D_XY</a>
	2011	can be steered, if they are visualized with the plot program <a href="http://www.muk.uni-hannover.de/institut/software/iso2d_beschreibung.html">ISO2D</a>.
	2012	This file contains the so-called local parameter set (NAMELIST - group
	2013	name: &LOCAL) required by ISO2D (one parameter set for each
	2014	field
	2015	present at the file PLOT2D_XY). After the model run these parameter
	2016	sets can be edited by the user, if neccessary.  </p>
	2017
	2018
	2019
	2020	<p>Additionally
	2021	ISO2D still needs another so-called global
	2022	parameter set. This is saved by the model to the local file <a href="#PLOT2D_XY_GLOBAL">PLOT2D_XY_GLOBAL</a>.
	2023	Due to the fact that ISO2D expects global and local parameter sets on
	2024	one and the same
	2025	file, in fact the global parameter set first, the user has to append
	2026	the
	2027	contents of the file PLOT2D_XY_LOCAL to the file PLOT2D_XY_GLOBAL
	2028	before the call of ISO2D (e.g. by an OUTPUT-command in the
	2029	MRUN-configuration file: “PLOT2D_XY_LOCAL >>
	2030	PLOT2D_XY_GLOBAL”).
	2031	This relatively pedantic proceeding is due to the fact that the model
	2032	can produce the file PLOT2D_XY_GLOBAL only at the end of the simulation
	2033	(only then e.g. when the final value of the global ISO2D - parameter <a href="http://www.muk.uni-hannover.de/institut/software/iso2d_beschreibung.html#PLANZ">planz</a>
	2034	is known), while the local parameter sets are written continuously
	2035	to the file PLOT2D_XY_LOCAL during the run.</p>
	2036
	2037
	2038	</td>
	2039
	2040
	2041	</tr>
	2042
	2043
	2044	<tr>
	2045
	2046
	2047	<td style="vertical-align: top; text-align: center;">28<br>
	2048
	2049
	2050	</td>
	2051
	2052
	2053	<td style="vertical-align: top;"><a name="PLOT2D_XZ_LOCAL"></a>PLOT2D_XZ_LOCAL<br>
	2054
	2055
	2056	<font color="#000000">(PLOT2D_XZ_LOCAL_O)</font>
	2057	</td>
	2058
	2059
	2060	<td style="vertical-align: top;">O<br>
	2061
	2062
	2063	</td>
	2064
	2065
	2066	<td style="vertical-align: top;">Ascii/ NAMELIST<br>
	2067
	2068
	2069	</td>
	2070
	2071
	2072	<td style="vertical-align: top;">
	2073
	2074	<p>NAMELIST -
	2075	parameter sets, with which the plot layout of the
	2076	data in the local file <a href="#PLOT2D_XZ">PLOT2D_XZ</a>
	2077	can be steered, if they are visualized with the plot program <a href="http://www.muk.uni-hannover.de/institut/software/iso2d_beschreibung.html">ISO2D</a>.
	2078	</p>
	2079
	2080
	2081
	2082	<p>The description of the local file <a href="#PLOT2D_XY_LOCAL">PLOT2D_XY_LOCAL</a>
	2083	applies to this file, respectively. </p>
	2084
	2085
	2086	</td>
	2087
	2088
	2089	</tr>
	2090
	2091
	2092	<tr>
	2093
	2094
	2095	<td style="vertical-align: top; text-align: center;">29<br>
	2096
	2097
	2098	</td>
	2099
	2100
	2101	<td style="vertical-align: top;"><a name="PLOT2D_YZ_LOCAL"></a>PLOT2D_YZ_LOCAL<br>
	2102
	2103
	2104	<font color="#000000">(PLOT2D_YZ_LOCAL_O)</font></td>
	2105
	2106
	2107	<td style="vertical-align: top;">O<br>
	2108
	2109
	2110	</td>
	2111
	2112
	2113	<td style="vertical-align: top;">Ascii/ NAMELIST<br>
	2114
	2115
	2116	</td>
	2117
	2118
	2119	<td style="vertical-align: top;">
	2120
	2121	<p>NAMELIST -
	2122	parameter sets, with which the plot layout of the
	2123	data in the local file <a href="#PLOT2D_YZ">PLOT2D_YZ</a>
	2124	can be steered, if they are visualized with the plot program <a href="http://www.muk.uni-hannover.de/institut/software/iso2d_beschreibung.html">ISO2D</a>.
	2125	</p>
	2126
	2127
	2128
	2129	<p>The description of the local file <a href="#PLOT2D_XY_LOCAL">PLOT2D_XY_LOCAL</a>
	2130	applies to this file, respectively. </p>
	2131
	2132
	2133	</td>
	2134
	2135
	2136	</tr>
	2137
	2138
	2139	<tr>
	2140
	2141
	2142	<td style="vertical-align: top; text-align: center;">30<br>
	2143
	2144
	2145	</td>
	2146
	2147
	2148	<td style="vertical-align: top;"><a name="PLOT3D_DATA"></a>PLOT3D_DATA<br>
	2149
	2150
	2151	(PLOT3D_DATA_O) </td>
	2152
	2153
	2154	<td style="vertical-align: top;">O<br>
	2155
	2156
	2157	</td>
	2158
	2159
	2160	<td style="vertical-align: top;">Binary<br>
	2161
	2162
	2163	</td>
	2164
	2165
	2166	<td style="vertical-align: top;">
	2167
	2168	<p>This file contains
	2169	the data of the three-dimensional arrays
	2170	(see <a href="chapter_4.2.html#data_output">data_output</a>)
	2171	written by the model in a format readable for the visualization
	2172	software AVS. Beyond that AVS
	2173	needs coordinate information, which are output into the
	2174	local file <a href="#PLOT3D_COOR">PLOT3D_COOR</a>,
	2175	as well as the local files <a href="#PLOT3D_FLD">PLOT3D_FLD</a>
	2176	and <a href="#PLOT3D_FLD_COOR">PLOT3D_FLD_COOR</a>,
	2177	which describe the structure of the files PLOT3D_DATA and PLOT3D_COOR
	2178	in the so-called AVS-FLD-format. Due to
	2179	the fact that AVS expects these information in only one (so-called FLD
	2180	-) file, the content of the file PLOT3D_FLD_COOR must be appended to
	2181	the file PLOT3D_FLD by the user after the end of the model run (e.g.
	2182	with an appropriate OUTPUT - command in the MRUN - configuration file: "<span style="font-family: monospace;">cat PLOT3D_FLD_COOR
	2183	>> PLOT3D_FLD</span>").  </p>
	2184
	2185
	2186
	2187	<p>With
	2188	parallel runs each processing element writes the data of
	2189	its subdomain to a separate file with the name
	2190	PLOT3D_DATA_<Processor-Id>, where
	2191	<Processor-Id> is a
	2192	four digit number (e.g. PLOT3D_DATA_0000). These files are not suitable
	2193	for AVS, but after the end of the model run they can be combined to one
	2194	file readable for AVS with the help of the program <tt><font style="font-size: 10pt;" size="2">combine_plot_fields.x</font></tt>.
	2195	This tool expects the files of the individual processing
	2196	elements under the names described above and outputs the combined file
	2197	into a new file PLOT3D_DATA. Usually it is called by an appropriate
	2198	OUTPUT - command in the MRUN-configuration file. The tool
	2199	writes informative messages about the accomplished actions into
	2200	the job protocol (e.g., even if no files were
	2201	found). By the call of <tt><font style="font-size: 10pt;" size="2">combine_plot_fields.x</font></tt>
	2202	also possibly existing files with two-dimensional plot data (see e.g. <a href="#PLOT2D_XY">PLOT2D_XY</a>)
	2203	are combined.  </p>
	2204
	2205
	2206
	2207	<p>With parallel runs the
	2208	output of data of large volume is also
	2209	possible in compressed form. For this purpose the initialization
	2210	parameter  <a href="chapter_4.2.html#do3d_compress">do3d_compress</a>
	2211	= <i>.TRUE.</i> must be set and the desired output
	2212	accuracy has to be
	2213	indicated
	2214	with the help of <a href="chapter_4.2.html#do3d_precision">do3d_precision</a>.
	2215	In favorable cases the file size can be reduced by
	2216	a factor of up to 5. For the visualization of compressed data a special
	2217	AVS module (<tt><font style="font-size: 11pt;" size="2">read_compressed_field</font></tt>)
	2218	and a further entry in the MRUN-configuration file are needed. More
	2219	details can be found in <a href="chapter_4.5.6.html">chapter
	2220	4.5.6</a>.</p>
	2221
	2222
	2223	</td>
	2224
	2225
	2226	</tr>
	2227
	2228
	2229	<tr>
	2230
	2231
	2232	<td style="vertical-align: top; text-align: center;">31<br>
	2233
	2234
	2235	</td>
	2236
	2237
	2238	<td style="vertical-align: top;"><a name="PLOT3D_COOR"></a>PLOT3D_COOR </td>
	2239
	2240
	2241	<td style="vertical-align: top;">O<br>
	2242
	2243
	2244	</td>
	2245
	2246
	2247	<td style="vertical-align: top;">Binary<br>
	2248
	2249
	2250	</td>
	2251
	2252
	2253	<td style="vertical-align: top;">
	2254
	2255	<p>Coordinate
	2256	information concerning
	2257	the three-dimensional arrays (see <a href="#PLOT3D_DATA">PLOT3D_DATA</a>)
	2258	needed by the visualization software AVS.  </p>
	2259
	2260
	2261
	2262	<p>The
	2263	file PLOT3D_COOR should be saved by the user into the same
	2264	permanent directory as the file PLOT3D_DATA.  </p>
	2265
	2266
	2267
	2268	<p>For
	2269	parallel runs PLOT3D_COOR is written by PE0 only.</p>
	2270
	2271
	2272	</td>
	2273
	2274
	2275	</tr>
	2276
	2277
	2278	<tr>
	2279
	2280
	2281	<td style="vertical-align: top; text-align: center;">32<br>
	2282
	2283
	2284	</td>
	2285
	2286
	2287	<td style="vertical-align: top;"><a name="PLOT3D_FLD"></a>PLOT3D_FLD </td>
	2288
	2289
	2290	<td style="vertical-align: top;">O<br>
	2291
	2292
	2293	</td>
	2294
	2295
	2296	<td style="vertical-align: top;">Ascii/  <br>
	2297
	2298
	2299	AVS-Fld </td>
	2300
	2301
	2302	<td style="vertical-align: top;">
	2303
	2304	<p>AVS-fld-file
	2305	describing the three-dimensional
	2306	array data, saved by the model into the local file <a href="#PLOT3D_DATA">PLOT3D_DATA</a>,
	2307	needed by the visualization software AVS.  </p>
	2308
	2309
	2310
	2311	<p>This
	2312	file describes the structure of the file PLOT3D_DATA
	2313	(e.g. number of arrays, array dimensions, data type etc.). It uses the
	2314	so-called AVS-Fld-format. It also contains the name of the file
	2315	(inclusive cycle number, but without path) under which the local file
	2316	PLOT3D_DATA is saved (this is the file name given in the file
	2317	connection statement of the MRUN – configuration) in the
	2318	permanent
	2319	directory of the user (possibly on remote computers). Under this name
	2320	AVS expects the data which are to be visualized. If there is no file
	2321	connection statement for PLOT3D_DATA indicated in the configuration
	2322	file, that file (filename) is registered “unknown”
	2323	in the file
	2324	PLOT3D_FLD and the
	2325	actual name must be inserted later by hand. The file PLOT3D_FLD should
	2326	be saved by the user in the same permanent directory as PLOT3D_DATA, so
	2327	that AVS can find the file PLOT3D_DATA without any problems. If the two
	2328	files lie in different directories, then the path name of the file
	2329	PLOT3D_DATA must be added.  </p>
	2330
	2331
	2332
	2333	<p>AVS-fld-files
	2334	are expected by AVS to have the
	2335	suffix "<span style="font-family: monospace;">.fld</span>"<font face="Cumberland, monospace">.</font>
	2336	Cycle numbers must not be attached behind this "<span style="font-family: monospace;">.fld</span>" suffix.
	2337	This suffix is
	2338	attached to the permanent file names (still after
	2339	possible cycle numbers) by <span style="font-weight: bold;">mrun</span>
	2340	if "<span style="font-family: monospace;">fld</span>"
	2341	is indicated in the <a href="http://www.muk.uni-hannover.de/institut/software/mrun_beschreibung.html#Spalte6">column
	2342	6 </a>of the file connection statement.  </p>
	2343
	2344
	2345
	2346	<p>Likewise,
	2347	AVS expects information about the coordinate
	2348	system underlying the arrays on this file. This information is output
	2349	by the model
	2350	into the local file <a href="#PLOT3D_FLD_COOR">PLOT3D_FLD_COOR</a>,
	2351	whose content the user has to append to the file PLOT3D_FLD after the
	2352	end of the model run (e.g. with an appropriate OUTPUT-command in the
	2353	MRUN-configuration file: “cat PLOT3D_FLD_COOR
	2354	>>
	2355	PLOT3D_FLD”).  </p>
	2356
	2357
	2358
	2359	<p>For parallel
	2360	runs, PLOT3D_FLD is produced by PE0 only.</p>
	2361
	2362
	2363	</td>
	2364
	2365
	2366	</tr>
	2367
	2368
	2369	<tr>
	2370
	2371
	2372	<td style="vertical-align: top; text-align: center;">33
	2373	</td>
	2374
	2375
	2376	<td style="vertical-align: top;"><a name="PLOT3D_FLD_COOR"></a>PLOT3D_FLD_COOR </td>
	2377
	2378
	2379	<td style="vertical-align: top;">O<br>
	2380
	2381
	2382	</td>
	2383
	2384
	2385	<td style="vertical-align: top;">Ascii/  <br>
	2386
	2387
	2388	AVS-Fld </td>
	2389
	2390
	2391	<td style="vertical-align: top;">
	2392
	2393	<p>File
	2394	for the description of the coordinate information output
	2395	by the model into the local file <a href="#PLOT3D_COOR">PLOT3D_COOR</a>,
	2396	which is needed for the visualization of three-dimensional array data
	2397	by visualization-software AVS.  </p>
	2398
	2399
	2400
	2401	<p>This
	2402	file describes the structure of the file PLOT3D_COOR
	2403	(e.g. grid spacing, data type etc.) using the so-called AVS-Fld-format.
	2404	It also contains the name of the file (inclusive cycle number, but
	2405	without path) into which the local file PLOT3D_COOR (this is the file
	2406	name described in the file connection statement of the MRUN -
	2407	configuration file) is output in the permanent directory of the user
	2408	(possibly on remote computers). Under this name AVS expects the data
	2409	which are to be visualized. If there is no file connection statement
	2410	for
	2411	PLOT3D_COOR indicated in the configuration file, that file is
	2412	registered as "unknown" in the file
	2413	PLOT3D_FLD_COOR and the actual name
	2414	must be inserted later by hand.  </p>
	2415
	2416
	2417
	2418	<p>AVS
	2419	expects the information contained in the file
	2420	PLOT3D_FLD_COOR, as well as the remaining information about the
	2421	three-dimensional arrays output by the model (see <a href="#PLOT3D_FLD">PLOT3D_FLD</a>)
	2422	in one and the same file. This is satisfied by appending the file
	2423	PLOT3D_FLD_COOR after the end of a run are to the
	2424	file PLOT3D_FLD (e.g. with an appropriate OUTPUT-command in the
	2425	MRUN-configuration file: “cat PLOT3D_FLD_COOR
	2426	>>
	2427	PLOT3D_FLD”).  </p>
	2428
	2429
	2430
	2431	<p>For parallel
	2432	runs, PLOT3D_FLD_COOR is written by PE0 only.</p>
	2433
	2434
	2435	</td>
	2436
	2437
	2438	</tr>
	2439
	2440
	2441	<tr>
	2442
	2443
	2444	<td style="vertical-align: top; text-align: center;">
	2445
	2446	<p align="center">40  </p>
	2447
	2448
	2449
	2450	<p align="center">and/or  <br>
	2451
	2452
	2453	possibly  </p>
	2454
	2455
	2456
	2457	<p align="center">40-49</p>
	2458
	2459
	2460	</td>
	2461
	2462
	2463	<td style="vertical-align: top;">
	2464
	2465	<p><a name="PLOT1D_DATA"></a>PLOT1D_DATA<br>
	2466
	2467
	2468	(PLOT1D_DATA_O) </p>
	2469
	2470
	2471
	2472	<p>and/or  <br>
	2473
	2474
	2475	possibly  </p>
	2476
	2477
	2478	PLOT1D_DATA_0  <br>
	2479
	2480
	2481	PLOT1D_DATA_1<br>
	2482
	2483
	2484	...<br>
	2485
	2486
	2487	<br>
	2488
	2489
	2490	(PLOT1D_DATA<span style="font-weight: bold;">_O</span>_0 <br>
	2491
	2492
	2493	<font color="#000000">PLOT1D_DATA<span style="font-weight: bold;">_O</span>_1 <br>
	2494
	2495
	2496	</font><font color="#000000">...)<span style="font-weight: bold;"></span> </font></td>
	2497
	2498
	2499	<td style="vertical-align: top;">O </td>
	2500
	2501
	2502	<td style="vertical-align: top;">Ascii </td>
	2503
	2504
	2505	<td style="vertical-align: top;">
	2506
	2507	<p>This file contains
	2508	data (possibly horizontally and/or
	2509	temporally averaged) of the vertical profiles (see <a href="chapter_4.2.html#data_output_pr">data_output_pr</a>)
	2510	written by the model in a format readable by <a href="http://www.muk.uni-hannover.de/institut/software/profil_beschreibung.html">profil</a>.
	2511	It is created only if <a href="chapter_4.2.html#data_output_format">data_output_format</a>
	2512	= <span style="font-style: italic;">'profil'</span>
	2513	is assigned. This file's format is suitable to be read by the plot
	2514	software <a href="http://www.muk.uni-hannover.de/institut/software/profil_beschreibung.html">profil</a>.
	2515	Each data point of the profiles is output in one single line (1st
	2516	column: height in m, 2nd column: value of the respective quantity).
	2517	Within the file, data
	2518	of the individual profiles are located one behind the other. The order
	2519	of the data in the file follows the order used in the assignment for <b>data_output_pr</b>
	2520	(<b>data_output_pr</b> = <span style="font-style: italic;">'u'</span>, <span style="font-style: italic;">'v'</span>,…
	2521	means that the file starts with the data of the u-component profile,
	2522	followed by the v-component profile, etc.). </p>
	2523
	2524
	2525
	2526	<p><br>
	2527
	2528
	2529	The data can only be visualized with <span style="font-weight: bold;">profil</span>
	2530	using NAMELIST-parameter sets, which are saved by the
	2531	model into the local file <a href="#PLOT1D_PAR">PLOT1D_PAR</a>.
	2532	</p>
	2533
	2534
	2535
	2536	<p>The profile data written to the file are described
	2537	with the
	2538	run parameter <a href="chapter_4.2.html#data_output_pr">data_output_pr</a>.
	2539	Plots produced with these data using the parameter file PLOT1D_PAR do
	2540	not have to contain all these profiles. The profiles which can be drawn
	2541	in the plot are described with run parameter <a href="chapter_4.2.html#cross_profiles">cross_profiles</a>.
	2542	By subsequent editing of the file PLOT1D_PAR all profiles can be
	2543	plotted (also the basic layout of the plots can be
	2544	changed). For orientation, each profile existing on the file
	2545	PLOT1D_DATA, starts with a comment line, which indicates the
	2546	presented variable and the output time. The text of these comment
	2547	lines is used as a legend in the plot. The very first line of the file
	2548	is a
	2549	comment line, containing information about the used model version, the
	2550	run identifier (base file name + number of the respective restart
	2551	run), the name of the executing computer, as well as the date and time
	2552	of the beginning of the run. At the end of this comment line is the
	2553	name
	2554	of the subdomain, to which the profiles belong (see <a href="chapter_4.1.html#statistic_regions">statistic_regions</a>).
	2555	By default, the profiles present averages of the total model domain. If
	2556	the model has to produce profiles for other subdomains beyond that, up
	2557	to 9 further files (units No. 41-49) are created, whereby the number of
	2558	the respective subdomain is attached
	2559	to the file name (e.g. PLOT1D_DATA_1). The name of the file with the
	2560	data of the total
	2561	domain in this case reads PLOT1D_DATA_0.  </p>
	2562
	2563
	2564
	2565	<p>For
	2566	presentation in the same plot, profile data of the restart
	2567	runs can be attached to existing data of preceding runs of a job chain.
	2568	One can do this with the file attribute <a href="http://www.muk.uni-hannover.de/institut/software/mrun_beschreibung.html#tra">tra</a>
	2569	in the file connection statement. The model produces a parameter file
	2570	(PLOT1D_PAR) for these combined data, if the run parameter is set <a href="chapter_4.2.html#use_prior_plot1d_parameters">use_prior_plot1d_parameters</a>
	2571	= <i>.T</i>. If this is omitted, then the parameter file
	2572	gives
	2573	wrong plots (i.e. <span style="font-family: monospace;">use_prior_plot1d_parameters
	2574	= .T.</span> and "<span style="font-family: monospace;">tra</span>"
	2575	must be specified together)!  </p>
	2576
	2577
	2578
	2579	<p>Further
	2580	information about output of
	2581	vertical profile data is given in the description of the run parameter <a href="chapter_4.2.html#data_output_pr">data_output_pr</a>.</p>
	2582
	2583
	2584	</td>
	2585
	2586
	2587	</tr>
	2588
	2589
	2590	<tr>
	2591
	2592
	2593	<td style="vertical-align: top; text-align: center;">80
	2594	</td>
	2595
	2596
	2597	<td style="vertical-align: top;"><a name="PARTICLE_INFOS"></a>PARTICLE_INFOS/<br>
	2598
	2599
	2600	(PARTICLE_INFOS<span style="font-weight: bold;">_O</span>/)
	2601	</td>
	2602
	2603
	2604	<td style="vertical-align: top;">O </td>
	2605
	2606
	2607	<td style="vertical-align: top;">Ascii </td>
	2608
	2609
	2610	<td style="vertical-align: top;">This
	2611	file is created in case of particle transport (see the <a href="chapter_4.2.html#particles_package">particles
	2612	package</a>). It contains statistical informations about the
	2613	number of
	2614	particles used and about the number of particles exchanged between each
	2615	single PE. These informations are output after every timestep if
	2616	switched on by parameter <a href="chapter_4.2.html#write_particle_statistics">write_particle_statistics</a>.
	2617	</td>
	2618
	2619
	2620	</tr>
	2621
	2622
	2623	<tr>
	2624
	2625
	2626	<td style="vertical-align: top; text-align: center;">81
	2627	</td>
	2628
	2629
	2630	<td style="vertical-align: top;"><a name="PLOTSP_X_PAR"></a>PLOTSP_X_PAR<br>
	2631
	2632
	2633	(PLOTSP_X_PAR_O)</td>
	2634
	2635
	2636	<td style="vertical-align: top;">O </td>
	2637
	2638
	2639	<td style="vertical-align: top;">Ascii/<br>
	2640
	2641
	2642	NAMELIST </td>
	2643
	2644
	2645	<td style="vertical-align: top;">This
	2646	file is created if spectra along x are calculated and output (see the <a href="chapter_4.2.html#particles_package">spectra
	2647	package</a>). It contains the NAMELIST parameter set, with which
	2648	the
	2649	layout of a plot
	2650	of the data in the local file <a href="#PLOTSP_X_DATA">PLOTSP_X_DATA</a>
	2651	can be steered, if these data are plotted with the plot software <a href="http://www.muk.uni-hannover.de/institut/software/profil_beschreibung.html">profil</a>.<br>
	2652
	2653
	2654
	2655	<p>It contains the so-called RAHMEN (frame)- and
	2656	CROSS-parameter sets (NAMELIST- group names <span style="font-style: normal;">&RAHMEN and/or
	2657	&CROSS</span>)
	2658	needed by <span style="font-weight: bold;">profil</span>.
	2659	The user can edit these parameter sets (and thus all details of the
	2660	plot layout) after the run.<br>
	2661
	2662
	2663	</p>
	2664
	2665
	2666
	2667	<p>By default,
	2668	for one quantity, all spectra at different heights
	2669	are plotted into a single panel. Different colors and line styles are
	2670	used for each height. Panels of up to four quantities are arranged on
	2671	one page in two lines (and two columns). More quantities are plotted on
	2672	additional page(s). If there is more than one output time (see <a href="chapter_4.2.html#dt_dosp">dt_dosp</a>),
	2673	additional pages will be plotted for each single output time. </p>
	2674
	2675
	2676	</td>
	2677
	2678
	2679	</tr>
	2680
	2681
	2682	<tr>
	2683
	2684
	2685	<td style="vertical-align: top; text-align: center;">82<br>
	2686
	2687
	2688	</td>
	2689
	2690
	2691	<td style="vertical-align: top;"><a name="PLOTSP_X_DATA"></a>PLOTSP_X_DATA<br>
	2692
	2693
	2694	(PLOTSP_X_DATA_O) </td>
	2695
	2696
	2697	<td style="vertical-align: top;">O<br>
	2698
	2699
	2700	</td>
	2701
	2702
	2703	<td style="vertical-align: top;">Ascii<br>
	2704
	2705
	2706	</td>
	2707
	2708
	2709	<td style="vertical-align: top;">This
	2710	file is created if spectra along x are calculated and output (see the <a href="chapter_4.2.html#particles_package">spectra
	2711	package</a>). It contains the spectral data along x (see <a href="chapter_4.2.html#data_output_sp">data_output_sp</a>)
	2712	in a format readable by <a href="http://www.muk.uni-hannover.de/institut/software/profil_beschreibung.html">profil</a>.
	2713	The data can only be visualized with <span style="font-weight: bold;">profil</span>
	2714	using NAMELIST parameter sets, which are written by
	2715	the model to the local file <a href="#PLOTSP_X_PAR">PLOTSP_X_PAR</a>.<br>
	2716
	2717
	2718	<br>
	2719
	2720
	2721	Regardless of the (sub)set of spectra specified by <a href="chapter_4.2.html#plot_spectra_level">plot_spectra_level</a>
	2722	for actual plotting, this file contains all data of spectra specified
	2723	by <a href="chapter_4.2.html#comp_spectra_level">comp_spectra_level</a>.<br>
	2724
	2725
	2726	<br>
	2727
	2728
	2729	<font>Each data point of a spectrum is output in a
	2730	single line
	2731	(1st column:
	2732	wavenumber, 2nd column: spectral coefficient). If spectra are to be
	2733	calculated and output for more than one height (see </font><font><a href="chapter_4.2.html#comp_spectra_level"><span lang="en-GB"><font face="Thorndale">comp_spectra_level</font></span></a></font><font>),
	2734	the spectral coefficients for the further heights can be found in the
	2735	subsequent columns. </font>The order
	2736	of the data in the file follows the order used in the assignment for <span style="font-style: italic;"></span><span style="font-style: italic;"></span><a href="chapter_4.2.html#data_output_sp">data_output_sp</a>.<br>
	2737
	2738
	2739	<br>
	2740
	2741
	2742	For orientation, a header of comment lines (one for each height level)
	2743	is placed in front of the spectral data of each quantity. They indicate
	2744	the respective quantity and the output time. The text of these comment
	2745	lines is used as a legend in the plot. </td>
	2746
	2747
	2748	</tr>
	2749
	2750
	2751	<tr>
	2752
	2753
	2754	<td style="vertical-align: top; text-align: center;">83<br>
	2755
	2756
	2757	</td>
	2758
	2759
	2760	<td style="vertical-align: top;"><a name="PLOTSP_Y_PAR"></a>PLOTSP_Y_PAR<br>
	2761
	2762
	2763	(PLOTSP_Y_PAR_O)</td>
	2764
	2765
	2766	<td style="vertical-align: top;">O<br>
	2767
	2768
	2769	</td>
	2770
	2771
	2772	<td style="vertical-align: top;">Ascii<br>
	2773
	2774
	2775	</td>
	2776
	2777
	2778	<td style="vertical-align: top;">This
	2779	file is created if spectra along y are calculated and output (see the <a href="chapter_4.2.html#particles_package">spectra
	2780	package</a>). It contains the NAMELIST parameter set, with which
	2781	the
	2782	layout of a plot
	2783	of the data in the local file <a href="#PLOTSP_Y_DATA">PLOTSP_Y_DATA</a>
	2784	can be steered, if these data are plotted with the plot software <a href="http://www.muk.uni-hannover.de/institut/software/profil_beschreibung.html">profil</a>.<br>
	2785
	2786
	2787	<br>
	2788
	2789
	2790	For more details see <a href="#PLOTSP_X_PAR">PLOTSP_X_PAR</a>.<br>
	2791
	2792
	2793	</td>
	2794
	2795
	2796	</tr>
	2797
	2798
	2799	<tr>
	2800
	2801
	2802	<td style="vertical-align: top; text-align: center;">84<br>
	2803
	2804
	2805	</td>
	2806
	2807
	2808	<td style="vertical-align: top;"><a name="PLOTSP_Y_DATA"></a>PLOTSP_Y_DATA<br>
	2809
	2810
	2811	(PLOTSP_Y_DATA_O)</td>
	2812
	2813
	2814	<td style="vertical-align: top;">O<br>
	2815
	2816
	2817	</td>
	2818
	2819
	2820	<td style="vertical-align: top;">Ascii<br>
	2821
	2822
	2823	</td>
	2824
	2825
	2826	<td style="vertical-align: top;">This
	2827	file is created if spectra along x are calculated and output (see the <a href="chapter_4.2.html#particles_package">spectra
	2828	package</a>). It contains the spectral data along y (see <a href="chapter_4.2.html#data_output_sp">data_output_sp</a>)
	2829	in a format readable by <a href="http://www.muk.uni-hannover.de/institut/software/profil_beschreibung.html">profil</a>.
	2830	The data can only be visualized with <span style="font-weight: bold;">profil</span>
	2831	using NAMELIST parameter sets, which are written by
	2832	the model to the local file <a href="#PLOTSP_Y_PAR">PLOTSP_Y_PAR</a>.<br>
	2833
	2834
	2835	<br>
	2836
	2837
	2838	For more details see <a href="#PLOTSP_X_DATA">PLOTSP_X_DATA</a>.</td>
	2839
	2840
	2841	</tr>
	2842
	2843
	2844	<tr>
	2845
	2846
	2847	<td style="vertical-align: top; text-align: center;">85<br>
	2848
	2849
	2850	</td>
	2851
	2852
	2853	<td style="vertical-align: top;"><a name="PARTICLE_DATA"></a>PARTICLE_DATA/<br>
	2854
	2855
	2856	(PARTICLE_DATA<span style="font-weight: bold;">_O</span>/)</td>
	2857
	2858
	2859	<td style="vertical-align: top;">O<br>
	2860
	2861
	2862	</td>
	2863
	2864
	2865	<td style="vertical-align: top;">Binary<br>
	2866
	2867
	2868	</td>
	2869
	2870
	2871	<td style="vertical-align: top;">This
	2872	file is created if particle transport is switched on (see the <a href="chapter_4.2.html#particles_package">particles
	2873	package</a>) and contains all particle data for one or several
	2874	output
	2875	times (see <a href="chapter_4.2.html#dt_write_particle_data">dt_write_particle_data</a>).<br>
	2876
	2877
	2878	<br>
	2879
	2880
	2881	The first record of this file contains an identification string (PALM
	2882	version number, run identifier, etc., 80 characters long). The second
	2883	record also contains a version string (80 characters long) followed by
	2884	two records with particle group informations (see file <span style="font-family: monospace;">check_open.f90</span>).
	2885	Then, for each
	2886	output time, two records follow, where the first one gives some general
	2887	information (numbers of particles, etc.) and the second one contains
	2888	the actual particle data. A FORTRAN TYPE structure is used for storing
	2889	the particle attributes. See file <span style="font-family: monospace;">advec_particles.f90</span>
	2890	for the detailed format.</td>
	2891
	2892
	2893	</tr>
	2894
	2895
	2896	<tr>
	2897
	2898
	2899	<td style="vertical-align: top; text-align: center;">90</td>
	2900
	2901
	2902	<td style="vertical-align: top;"><a name="PARTICLE_RESTART_DATA_IN"></a>PARTICLE_RESTART_<br>
	2903
	2904
	2905	DATA_IN/</td>
	2906
	2907
	2908	<td style="vertical-align: top;">I<br>
	2909
	2910
	2911	</td>
	2912
	2913
	2914	<td style="vertical-align: top;">Binary<br>
	2915
	2916
	2917	</td>
	2918
	2919
	2920	<td style="vertical-align: top;">Binary
	2921	data, which are read in by the model at the beginning
	2922	of a restart run (see <a href="chapter_3.3.html">chapter
	2923	3.3</a>). The appropriate file must have been written by the
	2924	preceding
	2925	job of the job chain (see <a href="#PARTICLE_RESTART_DATA_OUT">PARTICLE_RESTART_DATA_OUT</a>).
	2926	This file is needed if particle transport is switched on (see the <a href="chapter_4.2.html#particles_package">particles
	2927	package</a>) and contains all particle informations (particle
	2928	positions, velocities, etc.) from the end of the preceding run.
	2929	Concerning runs on
	2930	several processors it has to be noted that each processing element
	2931	reads its own file and that the file content is processor-dependent.
	2932	The
	2933	number of processors which can be used must not be changed during a job
	2934	chain and/or if a job chain is continued. <br>
	2935
	2936
	2937	<br>
	2938
	2939
	2940	The first record of this file contains a version number (four character
	2941	string) of the subroutine, which output the data that follows (<span style="font-family: monospace;">write_particles</span>,
	2942	see end of
	2943	file <span style="font-family: monospace;">advec_particles.f90</span>).
	2944	This number has to
	2945	agree with the version number of the subroutine which is reading the
	2946	file
	2947	(<span style="font-family: monospace;">init_parrticles.f90</span>)
	2948	in
	2949	case of a restart run. Otherwise the model run
	2950	is aborted. Version numbers are changed whenever new code revisions
	2951	require a change of the file format. Some general informations like the
	2952	number of particles stored in the file, the number of particle groups,
	2953	etc.. are stored in the second record. The third record includes the
	2954	particles to be released at the source and the fourth record contains
	2955	all current particles. In case that particle tails are used (see <a href="chapter_4.2.html#maximum_number_of_tailpoints">maximum_number_of_tailpoints</a>),
	2956	a further record may follow, which contains the particle tail
	2957	informations. A FORTRAN TYPE structure is used for storing the particle
	2958	attributes. For detailed informations about the file format see the
	2959	corresponding READ statements in file <span style="font-family: monospace;">init_particles.f90</span>
	2960	.<br>
	2961
	2962
	2963	</td>
	2964
	2965
	2966	</tr>
	2967
	2968
	2969	<tr>
	2970
	2971
	2972	<td style="vertical-align: top; text-align: center;">90<br>
	2973
	2974
	2975	</td>
	2976
	2977
	2978	<td style="vertical-align: top;"><a name="PARTICLE_RESTART_DATA_IN"></a>PARTICLE_RESTART_<br>
	2979
	2980
	2981	DATA_OUT/</td>
	2982
	2983
	2984	<td style="vertical-align: top;">O<br>
	2985
	2986
	2987	</td>
	2988
	2989
	2990	<td style="vertical-align: top;">Binary<br>
	2991
	2992
	2993	</td>
	2994
	2995
	2996	<td style="vertical-align: top;">Binary
	2997	data, which are output at the end of the
	2998	run and possibly needed by restart runs (see <a href="chapter_3.3.html">chapter
	2999	3.3</a>) for the initialization. This output file is then read as
	3000	file <a href="#PARTICLE_RESTART_DATA_IN">PARTICLE_RESTART_DATA_IN</a>.
	3001	The file is only written if particle transport is switched on (see the <a href="chapter_4.2.html#particles_package">particles
	3002	package</a>). For a more detailed description of the file
	3003	structure see <a href="#PARTICLE_RESTART_DATA_IN">PARTICLE_RESTART_DATA_IN</a>.</td>
	3004
	3005
	3006	</tr>
	3007
	3008
	3009	<tr>
	3010
	3011
	3012	<td style="vertical-align: top; text-align: center;">90<br>
	3013
	3014
	3015	</td>
	3016
	3017
	3018	<td style="vertical-align: top;">
	3019
	3020	<p><a name="PLOT1D_PAR"></a>PLOT1D_PAR<br>
	3021
	3022
	3023	(PLOT1D_PAR_O) </p>
	3024
	3025
	3026
	3027	<p>and/or  <br>
	3028
	3029
	3030	possibly  </p>
	3031
	3032
	3033
	3034	<p>PLOT1D_PAR_0  <br>
	3035
	3036
	3037	PLOT1D_PAR_1  <br>
	3038
	3039
	3040
	3041	.  <br>
	3042
	3043
	3044
	3045	.  <br>
	3046
	3047
	3048
	3049	.  <br>
	3050
	3051
	3052	PLOT1D_PAR_9</p>
	3053
	3054
	3055
	3056	<p></p>
	3057
	3058
	3059
	3060	<p>(PLOT1D_PAR<span style="font-weight: bold;">_O</span>_0
	3061	<br>
	3062
	3063
	3064	PLOT1D_PAR<font color="#000000"><span style="font-weight: bold;">_O</span></font>_1
	3065	<br>
	3066
	3067
	3068
	3069	.  <br>
	3070
	3071
	3072
	3073	.  <br>
	3074
	3075
	3076
	3077	.  <br>
	3078
	3079
	3080	PLOT1D_PAR<font color="#000000"><span style="font-weight: bold;">_O</span></font>_9)</p>
	3081
	3082
	3083	</td>
	3084
	3085
	3086	<td style="vertical-align: top;">O<br>
	3087
	3088
	3089	</td>
	3090
	3091
	3092	<td style="vertical-align: top;">Ascii/
	3093	NAMELIST<br>
	3094
	3095
	3096	</td>
	3097
	3098
	3099	<td style="vertical-align: top;">
	3100
	3101	<p>NAMELIST parameter set, with which the layout of a plot
	3102	of the data in the local file <a href="#PLOT1D_DATA">PLOT1D_DATA</a>
	3103	can be steered, if these data are visualized with the plot program <a href="http://www.muk.uni-hannover.de/institut/software/profil_beschreibung.html">profil</a>.
	3104	</p>
	3105
	3106
	3107
	3108	<p>This file contains the so-called RAHMEN (frame)-
	3109	and
	3110	CROSS-parameter sets (NAMELIST- group names <span style="font-style: normal;">&RAHMEN and/or
	3111	&CROSS</span>)
	3112	needed by <span style="font-weight: bold;">profil</span>.
	3113	These parameter sets (and thus all details of the plot layout) can be
	3114	edited after the model run by the user. By default, all profiles of one
	3115	variable saved at different times are drawn into one panel. Different
	3116	colors are used for each output time. Which profiles are drawn
	3117	into which plane and how these planes are arranged on the
	3118	plot, is determined with the parameters <a href="chapter_4.2.html#cross_profiles">cross_profiles</a>,
	3119	<a href="chapter_4.2.html#profile_columns">profile_columns</a>
	3120	and <a href="chapter_4.2.html#profile_rows">profile_rows</a>.
	3121	</p>
	3122
	3123
	3124
	3125	<p>The file PLOT1D_PAR is created by the model
	3126	briefly before
	3127	the end of a run. If a model run crashes uncontrolled (run time
	3128	errors or CPU - time exceeded), this file is usually missing, although
	3129	profile data were saved to the file PLOT1D_DATA.  </p>
	3130
	3131
	3132
	3133	<p>If
	3134	the model has to create profiles for different subdomains
	3135	(see <a href="chapter_4.1.html#statistic_regions">statistic_regions</a>),
	3136	further files are created, whereby the file name includes the number of
	3137	the respective subdomain (e.g. PLOT1D_PAR_1). In this case the name of
	3138	the file with NAMELIST parameters of the total domain is
	3139	PLOT1D_PAR_0.  </p>
	3140
	3141
	3142
	3143	<p>For presentation in the
	3144	same plot, profile data of the restart
	3145	runs can be appended to existing data of preceding runs of a job chain.
	3146	One can do this with the file attribute <a href="http://www.muk.uni-hannover.de/institut/software/mrun_beschreibung.html#tra">tra</a>
	3147	in the file connection statement for PLOT1D_DATA. The model produces
	3148	a parameter file PLOT1D_PAR for these combined data, if the run
	3149	parameter is set <a href="chapter_4.2.html#use_prior_plot1d_parameters">use_prior_plot1d_parameters</a>
	3150	= <i>.T</i>. If this is omitted, then the parameter file
	3151	gives
	3152	wrong plots (i.e. <span style="font-family: monospace;">use_prior_plot1d_parameters
	3153	= .T.</span> and "<span style="font-family: monospace;">tra</span>"
	3154	must be specified together)!</p>
	3155
	3156
	3157	</td>
	3158
	3159
	3160	</tr>
	3161
	3162
	3163	<tr>
	3164
	3165
	3166	<td style="vertical-align: top; text-align: center;">90<br>
	3167
	3168
	3169	</td>
	3170
	3171
	3172	<td style="vertical-align: top;"><a name="PLOT2D_XY_GLOBAL"></a>PLOT2D_XY_GLOBAL<br>
	3173
	3174
	3175	(PLOT2D_XY_GLOBAL_O)</td>
	3176
	3177
	3178	<td style="vertical-align: top;">O<br>
	3179
	3180
	3181	</td>
	3182
	3183
	3184	<td style="vertical-align: top;">Ascii/  <br>
	3185
	3186
	3187	NAMELIST</td>
	3188
	3189
	3190	<td style="vertical-align: top;">
	3191
	3192	<p>NAMELIST
	3193	parameter set, with which the plot layout
	3194	of the data in local file <a href="#PLOT2D_XY">PLOT2D_XY</a>
	3195	can be steered, if they are visualized with the plot program <a href="http://www.muk.uni-hannover.de/institut/software/iso2d_beschreibung.html">iso2d</a>.
	3196	This file contains the so-called global parameter set (NAMELIST - group
	3197	name: &GLOBAL) needed by <span style="font-weight: bold;">iso2d</span>.
	3198	This parameter set can be edited
	3199	after the model run by the user. By default, the arrays are drawn using
	3200	isolines and each array
	3201	will be drawn onto a separate page (thus no color shading
	3202	presentation, no vector arrows, streamlines etc.).  </p>
	3203
	3204
	3205
	3206	<p>Additionally <span style="font-weight: bold;">iso2d</span>
	3207	needs the so-called local parameter
	3208	sets. These are saved by the model to the local file <a href="#PLOT2D_XY_LOCAL">PLOT2D_XY_LOCAL</a>.
	3209	Due to the fact that <span style="font-weight: bold;">iso2d</span>
	3210	expects global and local parameter sets on one and the same
	3211	file, in fact the global parameter set first, the user has to append
	3212	the contents of the file PLOT2D_XY_LOCAL to the file PLOT2D_XY_GLOBAL
	3213	before call of <span style="font-weight: bold;">iso2d</span>
	3214	(e.g. by
	3215	an OUTPUT - command in the MRUN -
	3216	configuration file: “cat PLOT2D_XY_LOCAL >>
	3217	PLOT2D_XY_GLOBAL”).
	3218	This
	3219	relatively pedantic proceedure is due to the fact that the model can
	3220	create the file PLOT2D_XY_GLOBAL only at the end of the simulation
	3221	(only then, when the final value of the global <span style="font-weight: bold;">iso2d</span>-parameter <a href="http://www.muk.uni-hannover.de/institut/software/iso2d_beschreibung.html#PLANZ">planz</a>
	3222	is known), while the local parameter sets are written continuously
	3223	to the file PLOT2D_XY_LOCAL during the run. Since the file
	3224	PLOT2D_XY_GLOBAL needs to be addressed only briefly once, output-unit
	3225	90 is used, which is also used for other files.</p>
	3226
	3227
	3228	</td>
	3229
	3230
	3231	</tr>
	3232
	3233
	3234	<tr>
	3235
	3236
	3237	<td style="vertical-align: top; text-align: center;">90<br>
	3238
	3239
	3240	</td>
	3241
	3242
	3243	<td style="vertical-align: top;"><a name="PLOT2D_XZ_GLOBAL"></a>PLOT2D_XZ_GLOBAL<br>
	3244
	3245
	3246	(PLOT2D_XZ_GLOBAL_O)</td>
	3247
	3248
	3249	<td style="vertical-align: top;">O<br>
	3250
	3251
	3252	</td>
	3253
	3254
	3255	<td style="vertical-align: top;">Ascii/  <br>
	3256
	3257
	3258	NAMELIST</td>
	3259
	3260
	3261	<td style="vertical-align: top;">
	3262
	3263	<p>NAMELIST
	3264	parameter set, with which the plot layout of the data
	3265	in the local file <a href="#PLOT2D_XZ">PLOT2D_XZ</a>
	3266	can be steered, if they are visualized with the plot program <a href="http://www.muk.uni-hannover.de/institut/software/iso2d_beschreibung.html">iso2d</a>.
	3267	</p>
	3268
	3269
	3270
	3271	<p>The description of the local file <a href="#PLOT2D_XY_GLOBAL">PLOT2D_XY_GLOBAL</a>
	3272	applies to this file, respectively.</p>
	3273
	3274
	3275	</td>
	3276
	3277
	3278	</tr>
	3279
	3280
	3281	<tr>
	3282
	3283
	3284	<td style="vertical-align: top; text-align: center;">90<br>
	3285
	3286
	3287	</td>
	3288
	3289
	3290	<td style="vertical-align: top;"><a name="PLOT2D_YZ_GLOBAL"></a>PLOT2D_YZ_GLOBAL<br>
	3291
	3292
	3293	(PLOT2D_YZ_GLOBAL_O)</td>
	3294
	3295
	3296	<td style="vertical-align: top;">O<br>
	3297
	3298
	3299	</td>
	3300
	3301
	3302	<td style="vertical-align: top;">Ascii/  <br>
	3303
	3304
	3305	NAMELIST</td>
	3306
	3307
	3308	<td style="vertical-align: top;">
	3309
	3310	<p>NAMELIST
	3311	parameter set, with which the plot layout of the data
	3312	in the local file <a href="#PLOT2D_YZ">PLOT2D_YZ</a>
	3313	can be steered, if they are visualized with the plot program <a href="http://www.muk.uni-hannover.de/institut/software/iso2d_beschreibung.html">iso2d</a>.
	3314	</p>
	3315
	3316
	3317
	3318	<p>The description of the local file <a href="#PLOT2D_XY_GLOBAL">PLOT2D_XY_GLOBAL</a>
	3319	applies to this file, respectively.</p>
	3320
	3321
	3322	</td>
	3323
	3324
	3325	</tr>
	3326
	3327
	3328	<tr>
	3329
	3330
	3331	<td style="vertical-align: top; text-align: center;">90</td>
	3332
	3333
	3334	<td style="vertical-align: top;"><a name="TOPOGRAPHY_DATA"></a>TOPOGRAPHY_DATA</td>
	3335
	3336
	3337	<td style="vertical-align: top;">I</td>
	3338
	3339
	3340	<td style="vertical-align: top;">Ascii</td>
	3341
	3342
	3343	<td>Two-dimensional <font color="#000000">topography
	3344	height information</font>
	3345	in m.<br>
	3346
	3347
	3348	In case of  <a href="chapter_4.1.html#topography">topography</a>
	3349	= <span style="font-style: italic;">'read_from_file'</span>
	3350	the subroutine <span style="font-family: Cumberland AMT;">init_grid</span> reads
	3351	the topography height information in m for each grid point in
	3352	a free floating point format. The data on file are laid out naturally,
	3353	i.e. in W-E orientation horizontally and in S-N orientation vertically,
	3354	they must thus be organized as follows:<br>
	3355
	3356
	3357
	3358	<ul>
	3359
	3360
	3361	<li>each
	3362	line contains height information in m from <span style="font-style: italic;">i = 0, ..., nx</span>,</li>
	3363
	3364
	3365	<li>the top line contains height information in m for <span style="font-style: italic;">j = ny</span> (North), the
	3366	bottom line for <span style="font-style: italic;">j = 0</span>
	3367	(South),</li>
	3368
	3369
	3370	<li>individual data must be separated by at
	3371	least one blank.</li>
	3372
	3373
	3374
	3375	</ul>
	3376
	3377
	3378	Layout sketch:<br>
	3379
	3380
	3381	<span style="font-family: Cumberland AMT;">
	3382
	3383	N<br>
	3384
	3385
	3386	(0,ny)   </span><font color="#000000"><span style="font-family: Cumberland AMT;">(1,ny)
	3387	</span></font><font color="#000000"><span style="font-family: Cumberland AMT;">(2,ny)
	3388	... </span></font><font color="#000000"><span style="font-family: Cumberland AMT;">(nx,ny)
	3389	<span style="font-family: Times New Roman,Times,serif;"></span></span></font><font color="#000000"> top of file</font><font color="#000000"><span style="font-family: Cumberland AMT;"><span style="font-family: Times New Roman,Times,serif;"></span></span></font><br>
	3390
	3391
	3392	<font color="#000000"><font color="#000000"><span style="font-family: Cumberland AMT;">
	3393	(0,ny-1) </span><font color="#000000"><span style="font-family: Cumberland AMT;">(1,ny-1) </span></font><font color="#000000"><span style="font-family: Cumberland AMT;">(2,ny-1)
	3394	... </span></font><font color="#000000"><span style="font-family: Cumberland AMT;">(nx,ny-1)  <br>
	3395
	3396
	3397	</span></font></font><font color="#000000"><span style="font-family: Cumberland AMT;"></span></font></font><font color="#000000"><font color="#000000"><span style="font-family: Cumberland AMT;">W
	3398	(0,ny-2) </span><font color="#000000"><span style="font-family: Cumberland AMT;">(1,ny-2) </span></font><font color="#000000"><span style="font-family: Cumberland AMT;">(2,ny-2)
	3399	... </span></font><font color="#000000"><span style="font-family: Cumberland AMT;">(nx,ny-2)   E<br>
	3400
	3401
	3402	</span></font></font></font><font color="#000000"><font color="#000000"><span style="font-family: Cumberland AMT;">
	3403
	3404	:<br>
	3405
	3406
	3407
	3408
	3409	:<br>
	3410
	3411
	3412	</span></font></font><font color="#000000"><font color="#000000"><span style="font-family: Cumberland AMT;">
	3413
	3414	(0,0)    </span><font color="#000000"><span style="font-family: Cumberland AMT;">(1,0)
	3415	</span></font><font color="#000000"><span style="font-family: Cumberland AMT;">(2,0)
	3416	... </span></font><font color="#000000"><span style="font-family: Cumberland AMT;">(nx,0)
	3417	</span></font></font></font><font color="#000000"> bottom of file</font><br>
	3418
	3419
	3420	<font color="#000000"><span style="font-family: Cumberland AMT;">
	3421
	3422	S<br></span></font>
	3423
	3424
	3425	<br><span style="font-family: Arial;"></span><font color="#000000">Example for a 50m building surrounded by a 12.5m podium on flat ground:<br>
	3426
	3427
	3428	<span style="font-family: Cumberland AMT;"></span><font color="#000000"><font color="#000000"><span style="font-family: Cumberland AMT;">
	3429	0    0    0    0    0
	3430	0    0    0    0
	3431	0    0    0    0<br></span></font></font></font><font color="#000000"><font color="#000000"><font color="#000000"><font color="#000000"><font color="#000000"><span style="font-family: Cumberland AMT;">    0 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5    0    0
	3432	</span></font></font></font></font><font color="#000000"><font color="#000000"><font color="#000000"><span style="font-family: Cumberland AMT;"><br></span></font></font></font><font color="#000000"><font color="#000000"><font color="#000000"><font color="#000000"><span style="font-family: Cumberland AMT;"></span></font></font><font color="#000000"><font color="#000000"><span style="font-family: Cumberland AMT;"> </span></font></font></font></font></font><font color="#000000"><font color="#000000"><font color="#000000"><font color="#000000"><font color="#000000"><span style="font-family: Cumberland AMT;">    0 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5    0    0
	3433	</span></font></font></font></font><font color="#000000"><font color="#000000"><font color="#000000"><span style="font-family: Cumberland AMT;"><br></span></font></font></font><font color="#000000"><font color="#000000"><font color="#000000"><font color="#000000"><span style="font-family: Cumberland AMT;"></span></font></font><font color="#000000"><font color="#000000"><span style="font-family: Cumberland AMT;"> </span></font></font></font></font></font><font color="#000000"><font color="#000000"><font color="#000000"><font color="#000000"><span style="font-family: Cumberland AMT;">
	3434	0 12.5 12.5   50   50   50   50   50
	3435	50 12.5 12.5    0    0
	3436	<br></span></font></font></font></font><font color="#000000"><font color="#000000"><font color="#000000"><font color="#000000"><span style="font-family: Cumberland AMT;"></span></font></font><font color="#000000"><font color="#000000"><span style="font-family: Cumberland AMT;">
	3437	0 12.5 12.5   50   50   50   50
	3438	50   50 12.5 12.5    0    0
	3439	<br></span></font></font></font></font><font color="#000000"><font color="#000000"><font color="#000000"><font color="#000000"><span style="font-family: Cumberland AMT;"></span></font></font><font color="#000000"><font color="#000000"><span style="font-family: Cumberland AMT;">
	3440	0 12.5 12.5   50   50   50   50
	3441	50   50 12.5 12.5    0    0
	3442	</span></font></font></font></font><br><font color="#000000"><font color="#000000"><font color="#000000"><span style="font-family: Cumberland AMT;"></span></font></font></font><font color="#000000"><font color="#000000"><font color="#000000"><font color="#000000"><span style="font-family: Cumberland AMT;">   0 12.5 12.5   50   50   50   50   50   50 12.5 12.5    0    0 <br>
	3443	</span></font></font></font><font color="#000000"><font color="#000000"><font color="#000000"><font color="#000000"><span style="font-family: Cumberland AMT;"></span></font></font><font color="#000000"><font color="#000000"><span style="font-family: Cumberland AMT;">
	3444	0 12.5 12.5   50   50   50   50
	3445	50   50 12.5 12.5    0    0
	3446	</span></font></font></font></font><font color="#000000"><font color="#000000"><font color="#000000"><span style="font-family: Cumberland AMT;"><br></span></font></font></font><font color="#000000"><font color="#000000"><font color="#000000"><font color="#000000"><span style="font-family: Cumberland AMT;"></span></font></font><font color="#000000"><font color="#000000"><span style="font-family: Cumberland AMT;">
	3447	0 12.5 12.5   50   50   50   50
	3448	50   50 12.5 12.5    0    0
	3449	<br></span></font></font></font></font><font color="#000000"><font color="#000000"><font color="#000000"><font color="#000000"><span style="font-family: Cumberland AMT;"></span></font></font><font color="#000000"><font color="#000000"><span style="font-family: Cumberland AMT;"></span></font></font></font></font></font><font color="#000000"><font color="#000000"><font color="#000000"><font color="#000000"><font color="#000000"><font color="#000000"><span style="font-family: Cumberland AMT;">    0 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5    0    0
	3450	</span></font></font></font></font><font color="#000000"><font color="#000000"><font color="#000000"><span style="font-family: Cumberland AMT;"><br></span></font></font></font><font color="#000000"><font color="#000000"><font color="#000000"><font color="#000000"><span style="font-family: Cumberland AMT;"></span></font></font><font color="#000000"><font color="#000000"><span style="font-family: Cumberland AMT;"> </span></font></font></font></font></font><font color="#000000"><font color="#000000"><font color="#000000"><font color="#000000"><font color="#000000"><span style="font-family: Cumberland AMT;">    0 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5    0    0
	3451	</span></font></font></font></font><font color="#000000"><font color="#000000"><font color="#000000"><span style="font-family: Cumberland AMT;"><br></span></font></font></font><font color="#000000"><font color="#000000"><font color="#000000"><font color="#000000"><span style="font-family: Cumberland AMT;"></span></font></font><font color="#000000"><font color="#000000"><span style="font-family: Cumberland AMT;"> </span></font></font></font></font></font><font color="#000000"><font color="#000000"><font color="#000000"><font color="#000000"><span style="font-family: Cumberland AMT;"></span></font></font></font></font></font><font color="#000000"><font color="#000000"><font color="#000000"><font color="#000000"><span style="font-family: Cumberland AMT;">
	3452	0    0    0    0    0
	3453	0    0    0    0
	3454	0    0    0    0<br></span></font></font></font><font color="#000000"><font color="#000000"><font color="#000000"><font color="#000000"><font color="#000000"><span style="font-family: Cumberland AMT;"></span></font></font></font></font></font></font><font color="#000000"><font color="#000000"><font color="#000000"><font color="#000000"><font color="#000000"><span style="font-family: Cumberland AMT;"></span></font></font></font></font></font><font color="#000000"><font color="#000000"><font color="#000000"><font color="#000000"><font color="#000000"><span style="font-family: Cumberland AMT;"></span></font></font></font></font><font color="#000000"><font color="#000000"><font color="#000000"><span style="font-family: Cumberland AMT;"></span></font></font></font></font><br>
	3455
	3456
	3457	These data must exactly match the horizontal grid. <font color="#000000">Due to the staggered grid the topography will be displaced by -0.5 <a href="chapter_4.1.html#dx">dx</a> in x-direction and -0.5 <a href="chapter_4.1.html#dy">dy</a> in y-direction.</font><br>
	3458
	3459
	3460	Alternatively, the user may add code to the user interface subroutine <a href="chapter_3.5.1.html#user_init_grid">user_init_grid</a>
	3461	to allow different data formats.</td>
	3462
	3463
	3464
	3465
	3466
	3467	</tr>
	3468
	3469
	3470	<tr>
	3471
	3472
	3473	<td style="vertical-align: top; text-align: center;"><font color="#000000">101</font></td>
	3474
	3475
	3476	<td style="vertical-align: top;"><font color="#000000"><a name="DATA_2D_XY_NETCDF"></a>DATA_2D_XY_NETCDF<br>
	3477
	3478
	3479	(DATA_2D_XY_NETCDF_O)</font></td>
	3480
	3481
	3482	<td style="vertical-align: top;"><font color="#000000">I/O</font></td>
	3483
	3484
	3485	<td style="vertical-align: top;"><font color="#000000">Binary/<br>
	3486
	3487
	3488	NetCDF-<br>
	3489
	3490
	3491	format</font></td>
	3492
	3493
	3494	<td style="vertical-align: top;"><font color="#000000"><font color="#000000">This file
	3495	contains data of the two-dimensional horizontal
	3496	cross sections (see <a href="../app/chapter_4.2.html#data_output">data_output</a>)
	3497	in NetCDF format. The data in this file can be visualized by any
	3498	graphic software which provides a NetCDF interface (e.g. <span style="font-weight: bold;">NCL </span>or<span style="font-weight: bold;"> ferret</span>).<br>
	3499
	3500
	3501	<br>
	3502
	3503
	3504	More detailed informations about the PALM-NetCDF-output are given in <a href="../app/chapter_4.5.1.html">chapter  4.5.1</a>.</font></font></td>
	3505
	3506
	3507
	3508
	3509
	3510	</tr>
	3511
	3512
	3513	<tr>
	3514
	3515
	3516	<td style="vertical-align: top; text-align: center;"><font color="#000000">102</font></td>
	3517
	3518
	3519	<td style="vertical-align: top;"><font color="#000000"><a name="DATA_2D_XZ_NETCDF"></a>DATA_2D_XZ_NETCDF<br>
	3520
	3521
	3522	(DATA_2D_XZ_NETCDF_O)</font></td>
	3523
	3524
	3525	<td style="vertical-align: top;"><font color="#000000">I/O</font></td>
	3526
	3527
	3528	<td style="vertical-align: top;"><font color="#000000"><font color="#000000">Binary/<br>
	3529
	3530
	3531	NetCDF-<br>
	3532
	3533
	3534	format</font></font></td>
	3535
	3536
	3537	<td style="vertical-align: top;"><font color="#000000"><font color="#000000"><font color="#000000">This file
	3538	contains data of the two-dimensional vertical (xz)
	3539	cross sections (see <a href="../app/chapter_4.2.html#data_output">data_output</a>)
	3540	in NetCDF format. The data in this file can be visualized by any
	3541	graphic software which provides a NetCDF interface (e.g. <span style="font-weight: bold;">NCL </span>or<span style="font-weight: bold;"> ferret</span>).<br>
	3542
	3543
	3544	<br>
	3545
	3546
	3547	More detailed informations about the PALM-NetCDF-output are given in <a href="../app/chapter_4.5.1.html">chapter  4.5.1</a>.</font></font></font></td>
	3548
	3549
	3550
	3551
	3552
	3553	</tr>
	3554
	3555
	3556	<tr>
	3557
	3558
	3559	<td style="vertical-align: top; text-align: center;"><font color="#000000">103</font></td>
	3560
	3561
	3562	<td style="vertical-align: top;"><font color="#000000"><a name="DATA_2D_YZ_NETCDF"></a>DATA_2D_YZ_NETCDF<br>
	3563
	3564
	3565	(DATA_2D_YZ_NETCDF_O)</font></td>
	3566
	3567
	3568	<td style="vertical-align: top;"><font color="#000000">I/O</font></td>
	3569
	3570
	3571	<td style="vertical-align: top;"><font color="#000000"><font color="#000000">Binary/<br>
	3572
	3573
	3574	NetCDF-<br>
	3575
	3576
	3577	format</font></font></td>
	3578
	3579
	3580	<td style="vertical-align: top;"><font color="#000000"><font color="#000000"><font color="#000000">This file
	3581	contains data of the two-dimensional vertical
	3582	(yz) cross sections (see <a href="../app/chapter_4.2.html#data_output">data_output</a>)
	3583	in NetCDF format. The data in this file can be visualized by any
	3584	graphic software which provides a NetCDF interface (e.g. <span style="font-weight: bold;">NCL </span>or<span style="font-weight: bold;"> ferret</span>).<br>
	3585
	3586
	3587	<br>
	3588
	3589
	3590	More detailed informations about the PALM-NetCDF-output are given in <a href="../app/chapter_4.5.1.html">chapter  4.5.1</a>.</font></font></font></td>
	3591
	3592
	3593
	3594
	3595
	3596	</tr>
	3597
	3598
	3599	<tr>
	3600
	3601
	3602	<td style="vertical-align: top; text-align: center;"><font color="#000000">104</font></td>
	3603
	3604
	3605	<td style="vertical-align: top;"><font color="#000000"><a name="DATA_1D_PR_NETCDF"></a>DATA_1D_PR_NETCDF<br>
	3606
	3607
	3608	(DATA_1D_PR_NETCFD_O)</font></td>
	3609
	3610
	3611	<td style="vertical-align: top;"><font color="#000000">I/O</font></td>
	3612
	3613
	3614	<td style="vertical-align: top;"><font color="#000000"><font color="#000000">Binary/<br>
	3615
	3616
	3617	NetCDF-<br>
	3618
	3619
	3620	format</font></font></td>
	3621
	3622
	3623	<td style="vertical-align: top;"><font color="#000000"><font color="#000000"><font color="#000000">This file
	3624	contains data of the horizontally averaged vertical profiles (see <a href="../app/chapter_4.2.html#data_output_pr">data_output_pr</a>)
	3625	in NetCDF format. The data in this file can be visualized by any
	3626	graphic software which provides a NetCDF interface (e.g. <span style="font-weight: bold;">NCL </span>or<span style="font-weight: bold;"> ferret</span>).<br>
	3627
	3628
	3629	<br>
	3630
	3631
	3632	More detailed informations about the PALM-NetCDF-output are given in <a href="../app/chapter_4.5.1.html">chapter  4.5.1</a>.</font></font></font></td>
	3633
	3634
	3635
	3636
	3637
	3638	</tr>
	3639
	3640
	3641	<tr>
	3642
	3643
	3644	<td style="vertical-align: top; text-align: center;"><font color="#000000">105</font></td>
	3645
	3646
	3647	<td style="vertical-align: top;"><font color="#000000"><a name="DATA_1D_TS_NETCDF"></a>DATA_1D_TS_NETCDF<br>
	3648
	3649
	3650	(DATA_1D_TS_NETCDF_O)</font></td>
	3651
	3652
	3653	<td style="vertical-align: top;"><font color="#000000">I/O</font></td>
	3654
	3655
	3656	<td style="vertical-align: top;"><font color="#000000"><font color="#000000">Binary/<br>
	3657
	3658
	3659	NetCDF-<br>
	3660
	3661
	3662	format</font></font></td>
	3663
	3664
	3665	<td style="vertical-align: top;"><font color="#000000"><font color="#000000"><font color="#000000">This file
	3666	contains data of the timeseries (see <a href="chapter_4.2.html#dt_dots">dt_dots</a>)
	3667	in NetCDF format. The data in this file can be visualized by any
	3668	graphic software which provides a NetCDF interface (e.g. <span style="font-weight: bold;">NCL </span>or<span style="font-weight: bold;"> ferret</span>).<br>
	3669
	3670
	3671	<br>
	3672
	3673
	3674	More detailed informations about the PALM-NetCDF-output are given in <a href="../app/chapter_4.5.1.html">chapter  4.5.1</a>.</font></font></font></td>
	3675
	3676
	3677
	3678
	3679
	3680	</tr>
	3681
	3682
	3683	<tr>
	3684
	3685
	3686	<td style="vertical-align: top; text-align: center;"><font color="#000000">106</font></td>
	3687
	3688
	3689	<td style="vertical-align: top;"><font color="#000000"><a name="DATA_3D_NETCDF"></a>DATA_3D_NETCDF<br>
	3690
	3691
	3692	(DATA_3D_NETCDF_O)</font></td>
	3693
	3694
	3695	<td style="vertical-align: top;"><font color="#000000">I/O</font></td>
	3696
	3697
	3698	<td style="vertical-align: top;"><font color="#000000"><font color="#000000">Binary/<br>
	3699
	3700
	3701	NetCDF-<br>
	3702
	3703
	3704	format</font></font></td>
	3705
	3706
	3707	<td style="vertical-align: top;"><font color="#000000"><font color="#000000"><font color="#000000">This file
	3708	contains data of the 3d-volume data (see <a href="../app/chapter_4.2.html#data_output">data_output</a>)
	3709	in NetCDF format. The data in this file can be visualized by any
	3710	graphic software which provides a NetCDF interface (e.g. <span style="font-weight: bold;">NCL </span>or<span style="font-weight: bold;"> ferret</span>).<br>
	3711
	3712
	3713	<br>
	3714
	3715
	3716	More detailed informations about the PALM-NetCDF-output are given in <a href="../app/chapter_4.5.1.html">chapter  4.5.1</a>.</font></font></font></td>
	3717
	3718
	3719
	3720
	3721
	3722	</tr>
	3723
	3724
	3725	<tr>
	3726
	3727
	3728	<td style="vertical-align: top; text-align: center;"><font color="#000000">107</font></td>
	3729
	3730
	3731	<td style="vertical-align: top;"><font color="#000000"><a name="DATA_1D_SP_NETCDF"></a>DATA_1D_SP_NETCDF<br>
	3732
	3733
	3734	(DATA_1D_SP_NETCDF_O)</font></td>
	3735
	3736
	3737	<td style="vertical-align: top;"><font color="#000000">I/O</font></td>
	3738
	3739
	3740	<td style="vertical-align: top;"><font color="#000000"><font color="#000000">Binary/<br>
	3741
	3742
	3743	NetCDF-<br>
	3744
	3745
	3746	format</font></font></td>
	3747
	3748
	3749	<td style="vertical-align: top;"><font color="#000000"><font color="#000000"><font color="#000000">This file
	3750	contains data of the horizontal spectra (see <a href="../app/chapter_4.2.html#data_output_sp">data_output_sp</a>)
	3751	in NetCDF format. The data in this file can be visualized by any
	3752	graphic software which provides a NetCDF interface (e.g. <span style="font-weight: bold;">NCL </span>or<span style="font-weight: bold;"> ferret</span>).<br>
	3753
	3754
	3755	<br>
	3756
	3757
	3758	More detailed informations about the PALM-NetCDF-output are given in <a href="../app/chapter_4.5.1.html">chapter  4.5.1</a>.</font></font></font></td>
	3759
	3760
	3761
	3762
	3763
	3764	</tr>
	3765
	3766
	3767	<tr>
	3768
	3769
	3770	<td style="vertical-align: top; text-align: center;"><font color="#000000">108</font></td>
	3771
	3772
	3773	<td style="vertical-align: top;"><font color="#000000"><a name="DATA_PRT_NETCDF"></a>DATA_PRT_NETCDF/<br>
	3774
	3775
	3776	(DATA_PRT_NETCDF<span style="font-weight: bold;">_O</span>/)</font></td>
	3777
	3778
	3779	<td style="vertical-align: top;"><font color="#000000">I/O</font></td>
	3780
	3781
	3782	<td style="vertical-align: top;"><font color="#000000"><font color="#000000">Binary/<br>
	3783
	3784
	3785	NetCDF-<br>
	3786
	3787
	3788	format</font></font></td>
	3789
	3790
	3791	<td style="vertical-align: top;"><font color="#000000"><font color="#000000"><font color="#000000">This file
	3792	contains particle data (see <a href="../app/chapter_4.2.html#dt_prel">dt_prel</a>)
	3793	in NetCDF format. The data in this file can be visualized by any
	3794	graphic software which provides a NetCDF interface (e.g. <span style="font-weight: bold;">NCL </span>or<span style="font-weight: bold;"> ferret</span>).<br>
	3795
	3796
	3797	<br>
	3798
	3799
	3800	More detailed informations about the PALM-NetCDF-output are given in <a href="../app/chapter_4.5.1.html">chapter  4.5.1</a>.</font></font></font></td>
	3801
	3802
	3803
	3804
	3805
	3806	</tr>
	3807
	3808
	3809	<tr>
	3810
	3811
	3812	<td style="vertical-align: top; text-align: center;">109</td>
	3813
	3814
	3815	<td align="left" valign="top"><a name="DATA_1D_PTS_NETCDF"></a>DATA_1D_PTS_NETCDF<br>
	3816
	3817
	3818	(DATA_1D_PTS_NETCDF_O)</td>
	3819
	3820
	3821	<td align="left" valign="top">I/O</td>
	3822
	3823
	3824	<td align="left" valign="top">Binary/<br>
	3825
	3826
	3827	NetCDF-<br>
	3828
	3829
	3830	format</td>
	3831
	3832
	3833	<td align="left" valign="top">This
	3834	file contains data of the timeseries of particle quantities (<font color="#000000"><font color="#000000"><font color="#000000"><font color="#000000">see <a href="chapter_4.2.html#dt_prel">dt_prel</a>)
	3835	in NetCDF format. </font></font></font></font><font color="#000000"><font color="#000000"><font color="#000000"><font color="#000000">The data
	3836	in this file can be visualized by any graphic software which provides a
	3837	NetCDF interface (e.g. <span style="font-weight: bold;">NCL
	3838	</span>or<span style="font-weight: bold;">
	3839	ferret</span>).
	3840	For a list of available output quantities see </font></font></font></font><font color="#000000"><font color="#000000"><font color="#000000"><font color="#000000"><font color="#000000"> <a href="chapter_4.2.html#dt_dopts">dt_dopts</a>.</font></font></font></font></font><br>
	3841
	3842
	3843	<font color="#000000"><font color="#000000"><font color="#000000"><font color="#000000"><br>
	3844
	3845
	3846	</font></font></font></font><span lang="en-GB"><font face="Thorndale">In case of
	3847	using more than one particle group (see <a href="chapter_4.2.html#number_of_particle_groups">number_of_particle_groups</a>),
	3848	seperate time series are output for each of the groups. The long names
	3849	of the variables in the NetCDF file containing the respective
	3850	timeseries all end with the string</font><span style="font-style: italic; font-family: monospace;">' PG ##'</span><font face="Thorndale">, where ## is the number of the particle
	3851	group (<span style="font-style: italic;">01</span>, <span style="font-style: italic;">02</span>, etc.). <br>
	3852
	3853
	3854	<br>
	3855
	3856
	3857	</font></span><font color="#000000"><font color="#000000"><font color="#000000"><font color="#000000">More detailed informations about the
	3858	PALM-NetCDF-output are given in <a href="chapter_4.5.1.html">chapter
	3859	4.5.1</a>.</font></font></font></font></td>
	3860
	3861
	3862
	3863
	3864
	3865	</tr>
	3866
	3867
	3868	<tr>
	3869
	3870
	3871	<td style="text-align: center; vertical-align: top;">111</td>
	3872
	3873
	3874	<td style="vertical-align: top;"><a name="DATA_2D_XY_AV_NETCDF"></a>DATA_2D_XY_AV_NETCDF<br>
	3875
	3876
	3877	(DATA_2D_XY_AV_NETCDF_O)</td>
	3878
	3879
	3880	<td style="vertical-align: top;">I/O</td>
	3881
	3882
	3883	<td style="vertical-align: top;"><font color="#000000"><font color="#000000"><font color="#000000">Binary/<br>
	3884
	3885
	3886	NetCDF-<br>
	3887
	3888
	3889	format</font></font></font></td>
	3890
	3891
	3892	<td style="vertical-align: top;"><font color="#000000"><font color="#000000"><font color="#000000">This file
	3893	contains data of the temporally averaged two-dimensional horizontal
	3894	cross sections (see <a href="chapter_4.2.html#data_output">data_output</a>)
	3895	in NetCDF format. The data in this file can be visualized by any
	3896	graphic software which provides a NetCDF interface (e.g. <span style="font-weight: bold;">NCL </span>or<span style="font-weight: bold;"> ferret</span>).<br>
	3897
	3898
	3899	<br>
	3900
	3901
	3902	More detailed informations about the PALM-NetCDF-output are given in <a href="chapter_4.5.1.html">chapter  4.5.1</a>.</font></font></font></td>
	3903
	3904
	3905
	3906
	3907
	3908	</tr>
	3909
	3910
	3911	<tr>
	3912
	3913
	3914	<td style="text-align: center; vertical-align: top;">112</td>
	3915
	3916
	3917	<td style="vertical-align: top;"><a name="DATA_2D_XZ_AV_NETCDF"></a>DATA_2D_XZ_AV_NETCDF<br>
	3918
	3919
	3920	(DATA_2D_XZ_AV_NETCDF_O)</td>
	3921
	3922
	3923	<td style="vertical-align: top;">I/O</td>
	3924
	3925
	3926	<td style="vertical-align: top;"><font color="#000000"><font color="#000000"><font color="#000000">Binary/<br>
	3927
	3928
	3929	NetCDF-<br>
	3930
	3931
	3932	format</font></font></font></td>
	3933
	3934
	3935	<td style="vertical-align: top;"><font color="#000000"><font color="#000000"><font color="#000000"><font color="#000000">This file
	3936	contains data of the temporally
	3937	averaged two-dimensional vertical (xz)
	3938	cross sections (see <a href="chapter_4.2.html#data_output">data_output</a>)
	3939	in NetCDF format. The data in this file can be visualized by any
	3940	graphic software which provides a NetCDF interface (e.g. <span style="font-weight: bold;">NCL </span>or<span style="font-weight: bold;"> ferret</span>).<br>
	3941
	3942
	3943	<br>
	3944
	3945
	3946	More detailed informations about the PALM-NetCDF-output are given in <a href="chapter_4.5.1.html">chapter  4.5.1</a>.</font></font></font></font></td>
	3947
	3948
	3949
	3950
	3951
	3952	</tr>
	3953
	3954
	3955	<tr>
	3956
	3957
	3958	<td style="text-align: center; vertical-align: top;">113</td>
	3959
	3960
	3961	<td style="vertical-align: top;"><font color="#000000"><a name="DATA_2D_YZ_AV_NETCDF"></a>DATA_2D_YZ_AV_NETCDF<br>
	3962
	3963
	3964	(DATA_2D_YZ_AV_NETCDF_O)</font></td>
	3965
	3966
	3967	<td style="vertical-align: top;">I/O</td>
	3968
	3969
	3970	<td style="vertical-align: top;"><font color="#000000"><font color="#000000"><font color="#000000">Binary/<br>
	3971
	3972
	3973	NetCDF-<br>
	3974
	3975
	3976	format</font></font></font></td>
	3977
	3978
	3979	<td style="vertical-align: top;"><font color="#000000"><font color="#000000"><font color="#000000"><font color="#000000">This file
	3980	contains data of the temporally
	3981	averaged two-dimensional vertical
	3982	(yz) cross sections (see <a href="chapter_4.2.html#data_output">data_output</a>)
	3983	in NetCDF format. The data in this file can be visualized by any
	3984	graphic software which provides a NetCDF interface (e.g. <span style="font-weight: bold;">NCL </span>or<span style="font-weight: bold;"> ferret</span>).<br>
	3985
	3986
	3987	<br>
	3988
	3989
	3990	More detailed informations about the PALM-NetCDF-output are given in <a href="chapter_4.5.1.html">chapter  4.5.1</a>.</font></font></font></font></td>
	3991
	3992
	3993
	3994
	3995
	3996	</tr>
	3997
	3998
	3999	<tr>
	4000
	4001
	4002	<td style="text-align: center; vertical-align: top;">116</td>
	4003
	4004
	4005	<td style="vertical-align: top;"><font color="#000000"><a name="DATA_3D_AV_NETCDF"></a>DATA_3D_AV_NETCDF<br>
	4006
	4007
	4008	(DATA_3D_AV_NETCDF_O)</font></td>
	4009
	4010
	4011	<td style="vertical-align: top;">I/O</td>
	4012
	4013
	4014	<td style="vertical-align: top;"><font color="#000000"><font color="#000000"><font color="#000000">Binary/<br>
	4015
	4016
	4017	NetCDF-<br>
	4018
	4019
	4020	format</font></font></font></td>
	4021
	4022
	4023	<td style="vertical-align: top;"><font color="#000000"><font color="#000000"><font color="#000000"><font color="#000000">This file
	4024	contains data of the temporally
	4025	averaged 3d-volume data (see <a href="chapter_4.2.html#data_output">data_output</a>)
	4026	in NetCDF format. The data in this file can be visualized by any
	4027	graphic software which provides a NetCDF interface (e.g. <span style="font-weight: bold;">NCL </span>or<span style="font-weight: bold;"> ferret</span>).<br>
	4028
	4029
	4030	<br>
	4031
	4032
	4033	More detailed informations about the PALM-NetCDF-output are given in <a href="chapter_4.5.1.html">chapter  4.5.1</a>.</font></font></font></font></td>
	4034
	4035
	4036
	4037
	4038
	4039	</tr>
	4040
	4041
	4042
	4043	</tbody>
	4044	</table>
	4045
	4046
	4047	<font color="#000000"><br>
	4048
	4049
	4050	</font><br>
	4051
	4052
	4053	<font color="#000080"><font color="#000080"><a href="chapter_3.3.html"><font color="#000080"><img src="left.gif" name="Grafik1" align="bottom" border="2" height="32" width="32"></font></a><a href="index.html"><font color="#000080"><img src="up.gif" name="Grafik2" align="bottom" border="2" height="32" width="32"></font></a><a href="chapter_3.5.html"><font color="#000080"><img src="right.gif" name="Grafik3" align="bottom" border="2" height="32" width="32"></font></a></font></font><br>
	4054
	4055
	4056
	4057	<br>
	4058
	4059
	4060
	4061	<span style="font-style: italic;">Last change:</span>
	4062	$Id: chapter_3.4.html 134 2007-11-21 07:28:38Z steinfeld $<br>
	4063
	4064
	4065	</font><br>
	4066
	4067
	4068	</body></html>

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |