PALM error messages

Explanation

PA****
Identifier for messages in the PALM standard code
UI****
Identifier for messages in "user_" routines
NC****
Identifier for messages from the NetCDF library
Message identifier Error message
PA0001 "host" is not set. Please check that environment variable "localhost" is set before running PALM

PA0002 illegal coupling mode: ...
PA0003 dt_coupling is not set but required for coupling mode "..."
PA0004 coupling mode "...": dt_coupling = ... is not equal to dt_coupling_remote = ...
PA0005 coupling mode "...": dt_coupling <= 0.0 is not allowed and is reset to MAX(dt_max(A,O)) = ...
PA0006 coupling mode "...": restart_time = ... is not equal to restart_time_remote = ...
PA0007 coupling mode "...": dt_restart = ... is not equal to dt_restart_remote = ...
PA0008 coupling mode "...": simulation_time_since_reference = ... is not equal to simulation_time_since_reference_remote = ...
PA0009 coupling mode "...": dx = ... is not equal to dx_remote = ...
PA0010 coupling mode "...": dy = ... is not equal to dy_remote = ...
PA0011 coupling mode "...": nx = ... is not equal to nx_remote = ...
PA0012 coupling mode "...": ny = ... is not equal to ny_remote = ...
PA0013 illegal value given for loop_optimization: "..."
PA0014 a non-flat topography does not allow ...
PA0015 ocean = .T. does not allow ...
PA0016 unknown solver for perturbation pressure: psolver = "..."
PA0017 psolver = "..." only works for a 1d domain-decomposition along x please do not set npey/=1 in the parameter file
PA0018 psolver = ".." does not work for subdomains with unequal size please set grid_matching = ''strict'' in the parameter file

PA0019 psolver = "..." only works for a parallel environment
PA0020 unknown multigrid cycle: cycle_mg = "..."
PA0021 unknown fft-algorithm: fft_method = "..."
PA0022 unknown advection scheme: momentum_advec = "..."
PA0023 momentum_advec = "..." is not allowed with timestep_scheme = "..."
PA0024 unknown advection scheme: scalar_advec = "..."
PA0025 use_upstream_for_tke set .TRUE. because use_sgs_for_particles = .TRUE.
PA0026 use_upstream_for_tke = .TRUE. not allowed with timestep_scheme = "..."
PA0027 unknown timestep scheme: timestep_scheme = "..."
PA0028 scalar advection scheme "..." does not work with timestep_scheme ".."
PA0029 momentum advection scheme "..." does not work with timestep_scheme "..."
PA0030 initializing_action = "..." unkown or not allowed
PA0031 initializing_actions = "set_constant_profiles" and "set_1d-model_profiles" are not allowed simultaneously
PA0032 initializing_actions = "set_constant_profiles" and "by_user" are not allowed simultaneously
PA0033 initializing_actions = "by_user" and "set_1d-model_profiles" are not allowed simultaneously
PA0034 cloud_physics = ... is not allowed with humidity = ...
PA0035 precipitation = ... is not allowed with cloud_physics = ...
PA0036 humidity = .TRUE. and sloping_surface = .TRUE. are not allowed simultaneously
PA0037 UPS-scheme is not implemented for humidity = .TRUE.
PA0038 humidity = .TRUE. and passive_scalar = .TRUE. is not allowed simultaneously'
PA0039 UPS-scheme is not implemented for passive_scalar = .TRUE.
PA0040 illegal value "..." found for parameter grid_matching
PA0041 plant_canopy = .TRUE. requires a non-zero drag coefficient given value is drag_coefficient = 0.0
PA0042 use_top_fluxes must be .TRUE. in ocean version
PA0043 ABS( alpha_surface = ... ) must be< 90.0
PA0044 dt = ... <= 0.0
PA0045 cfl_factor = ... out of range 0.0 < cfl_factor <= 1.0 is required
PA0046 baroclinicity (ug) not allowed simultaneously with galilei transformation
PA0047 baroclinicity (vg) not allowed simultaneously with galilei transformation
PA0048 variable translation speed used for galilei-transformation, which may cause instabilities in stably stratified regions
PA0049 unknown boundary condition: bc_lr = "..."
PA0050 unknown boundary condition: bc_ns = "..."
PA0051 non-cyclic lateral boundaries do not allow psolver = "..."
PA0052 non-cyclic lateral boundaries do not allow momentum_advec = "..."
PA0053 non-cyclic lateral boundaries do not allow scalar_advec = "..."
PA0054 non-cyclic lateral boundaries do not allow galilei_transformation = .T.
PA0055 adjust_mixing_length = TRUE and bc_e_b = "neumann"
PA0056 adjust_mixing_length = FALSE and bc_e_b = "..."
PA0057 boundary condition bc_e_b changed to "..."
PA0058 unknown boundary condition: bc_e_b = "..."
PA0059 unknown boundary condition: bc_p_b = "..."
PA0060 boundary condition: bc_p_b = "..." not allowed with prandtl_layer = .FALSE.'
PA0061 unknown boundary condition: bc_p_t = "..."
PA0062 unknown boundary condition: bc_pt_b = "..."
PA0063 unknown boundary condition: bc_pt_t = "..."
PA0064 both, top_momentumflux_u AND top_momentumflux_v must be set
PA0065 boundary_condition: bc_pt_b = "..." is not allowed with constant_heatflux = .TRUE.
PA0066 constant_heatflux = .TRUE. is not allowed with pt_surface_initial_change (/=0) = ...
PA0067 boundary_condition: bc_pt_t = "..." is not allowed with constant_top_heatflux = .TRUE.
PA0068 unknown boundary condition: bc_sa_t = "..."
PA0069 boundary condition: bc_sa_t = "..." requires to set top_salinityflux
PA0070 boundary condition: bc_sa_t = "..." is not allowed with constant_top_salinityflux = .TRUE.'
PA0071 unknown boundary condition: bc_..._b ="..."
PA0072 unknown boundary condition: bc_..._t ="..."
PA0073 boundary condition: bc_..._b = "..." is not allowed with prescribed surface flux
PA0074 a prescribed surface flux is not allowed with ..._surface_initial_change (/=0) = ...
PA0075 boundary condition: bc_uv_b = "..." is not allowed with prandtl_layer = .TRUE.
PA0076 unknown boundary condition: bc_uv_b = "..."
PA0077 unknown boundary condition: bc_uv_t = "..."
PA0078 rayleigh_damping_factor = ... out of range [0.0,1.0]
PA0079 rayleigh_damping_height = ... out of range [0.0, ...]
PA0080 overshoot_limit_... < 0.0 is not allowed
PA0081 ups_limit_... < 0.0 is not allowed
PA0082 number of statistic_regions = ... but only 10 regions are allowed
PA0083 normalizing_region = ... must be >= 0 and <= ... (value of statistic_regions)
PA0084 dt_sort_particles is reset to 0.0 because of cloud_droplets = .TRUE.
PA0085 averaging_interval = ... must be <= dt_data_output = ...
PA0086 averaging_interval_pr = ... must be <= dt_dopr = ...
PA0087 averaging_interval_sp = ... must be <= dt_dosp = ...
PA0088 dt_averaging_input = ... must be <= averaging_interval = ...
PA0089 dt_averaging_input_pr = ... must be <= averaging_interval_pr = ...
PA0090 precipitation_amount_interval = ... must not be larger than dt_do2d_xy = ...
PA0091 data_output_pr = ... is not implemented for ocean = .FALSE.'
PA0092 data_output_pr = ... is not implemented for humidity = .FALSE.'
PA0093 data_output_pr = ... is not implemented for passive_scalar = .FALSE.'
PA0094 data_output_pr = ... is not implemented for cloud_physics = .FALSE.'
PA0095 data_output_pr = ... is not implemented for cloud_physics = .FALSE. and humidity = .FALSE.
PA0096 data_output_pr = ... is not implemented for cloud_physics = .FALSE. or cloud_droplets = .FALSE
PA0097 illegal value for data_output_pr or data_output_pr_user = "..."
PA0098 illegal value for data_output_pr = "..."
PA0099 z_max_do1d = ... must be >= ... or <= ...
PA0100 unknown normalization method cross_normalized_x = "..."
PA0101 unknown normalization method cross_normalized_y = "..."
PA0102 number of output quantitities given by data_output and data_output_user exceeds the limit of 100
PA0103 output of "..." requires constant_diffusion = .FALSE.
PA0104 output of "..." requires a "particles_par"-NAMELIST in the parameter file (PARIN)
PA0105 output of "..." requires humidity = .TRUE.
PA0106 output of "" requires cloud_physics = .TRUE. or cloud_droplets = .TRUE.'
PA0107 output of "..." requires cloud_droplets = .TRUE.
PA0108 output of "..." requires cloud_physics = .TRUE.
PA0109 output of "..." requires ocean = .TRUE.
PA0110 output of "..." requires passive_scalar = .TRUE.
PA0111 illegal value for data_output: "..." only 2d-horizontal cross sections are allowed for this value
PA0112 output of "..." requires precipitation = .TRUE.
PA0113 temporal averaging of precipitation amount "..." is not possible'
PA0114 illegal value for data_output or data_output_user = "..."
PA0115 illegal value for data_output = "..."
PA0116 z_max_do2d = ..., z_max_do2d must be >= ... (zu(nzb+1)) and <= ...(zu(nzt))
PA0117 do3d_compress = .TRUE. not allowed on host ""
PA0118 illegal precision: do3d_comp_prec ( ...) = "..."
PA0119 unknown variable "..." given for do3d_comp_prec(...)
PA0120 unknown value for data_output_format "..."
PA0121 km_constant = ... < 0.0
PA0122 prandtl_number = ... < 0.0
PA0123 prandtl_layer is not allowed with fixed value of km
PA0124 outflow_damping width out of range
PA0125 rif_min = ... must be less than rif_max = ...
PA0126 disturbance_level_b = ... must be >= ... (zu(3))
PA0127 disturbance_level_b = ... must be <= ... (zu(nzt-2))
PA0128 disturbance_level_t = ... must be <= ... (zu(nzt-2))
PA0129 disturbance_level_t = ... must be >= disturbance_level_b = ...
PA0130 disturbance_level_ind_t =... must be >= disturbance_level_b = ...
PA0131 inflow_disturbance_begin out of range
PA0132 inflow_disturbance_end out of range
PA0133 turbulent_inflow = .T. requires a Dirichlet condition at the inflow boundary
PA0134 illegal value for recycling_width: ...
PA0135 unknown random generator: random_generator = "..."
PA0136 damp_level_1d = ... must be > 0.0 and < ... (zu(nzt+1))
PA0137 mixing_length_1d = "..." is unknown
PA0138 dissipation_1d = "..." is unknown
PA0139 termination_time_needed = ... must be > 30.0 on host ...
PA0140 termination_time_needed = ... should be >= 300.0 on host "..."
PA0141 coupling requires PALM to be called with ''mrun -K parallel''
PA0142 absolute temperature < 0.0 at zu(...) = ...
PA0143 k=... j=... i=... ql_c=... part(...)%wf=... delta_r=...
PA0144 #1 k=... j=... i=... e_s=... e_a=... t_int=... d_radius=... delta_r=... particle_radius=...
PA0145 collision_efficiency out of range: ...
PA0146 maximum_number_of_particles needs to be increased but this is not allowed with netcdf_data_format < 3 NetCDF output is switched on (data_output_format = 'netcdf') and a NetCDF3 format is used (netcdf_data_format < 3).

If output of particle data is switched on (see dt_write_particle_data), the size of the particle array, given on each processor by maximum_number_of_particles, is not allowed to increase during the run, when the NetCDF3 data format is used, because NetCDF3 allows only one unlimited dimension, which is the time dimension. Anyhow, PALM tries to increase the size of the particle array, if the number of particles in a subdomain becomes larger than the size of this array. This may happen because of a flow convergence or because new sets of particles are released (see dt_prel).

This problem can be avoided by using the NetCDF4 data format (netcdf_data_format > 2), which allows more than one unlimited dimension.

Alternatively, maximum_number_of_particles can be given a sufficiently large value.
PA0147 maximum_number_of_tails needs to be increased but this is not allowed with netcdf_data_format < 3 NetCDF output is switched on (data_output_format = 'netcdf') and a NetCDF3 format is used (netcdf_data_format < 3).

If output of particle data is switched on (see dt_write_particle_data), the size of the particle tail array, given on each processor by maximum_number_of_tails, is not allowed to increase during the run, when the NetCDF3 data format is used, because NetCDF3 allows only one unlimited dimension, which is the time dimension. Anyhow, PALM tries to increase the size of the particle tail array, if the number of particle tails in a subdomain becomes larger than the size of this array. This may happen because of a flow convergence or because new sets of particles are released (see dt_prel).

This problem can be avoided by using the NetCDF4 data format (netcdf_data_format > 2), which allows more than one unlimited dimension.

Alternatively, maximum_number_of_tails can be given a sufficiently large value.
PA0148 particle too fast. n = ...
PA0149 particle out of range: i=... j=... k=... nxl=... nxr=... nys=... nyn=... nzb=... nzt=...
PA0150 Both dp_external and conserve_volume_flow are .TRUE. but one of them must be .FALSE.
PA0151 dp_level_b = ... is out of range
PA0152 dp_external is .TRUE. but dpdxy is zero, i.e. the external pressure gradient will not be applied
PA0153 dpdxy is nonzero but dp_external is .FALSE., i.e. the external pressure gradient will not be applied
PA0154 unknown conserve_volume_flow_mode: ...
PA0155 noncyclic boundary conditions require conserve_volume_flow_mode = ''inflow_profile''
PA0156 cyclic boundary conditions require conserve_volume_flow_mode = ''initial_profiles'' or ''bulk_velocity'' requires noncyclic boundary conditions
PA0137 nonzero bulk velocity requires conserve_volume_flow = .T. and conserve_volume_flow_mode = ''bulk_velocity''
PA0158 no vertical boundary condition for variable "..."
PA0159 no term for component "..."
PA0160 non-cyclic lateral boundaries along x do not allow calculation of spectra along x
PA0161 sorry, calculation of spectra in non parallel mode is still not realized
PA0162 non-cyclic lateral boundaries along y do not allow calculation of spectra along y
PA0163 run will be terminated because it is running out of job cpu limit remaining time: ... s termination time needed: ... s
PA0164 run will be terminated due to user settings of restart_time / dt_restart new restart time is: ... s
PA0165 re-open of unit 14 is not verified. Please check results!
PA0166 re-opening of file-id ... is not allowed
PA0167 opening file-id ... not allowed for PE ...
PA0168 opening file-id ... is not allowed since it is used otherwise
PA0169 no filename for AVS-data-file found in MRUN-config-file filename in FLD-file set to "unknown"
PA0170 no path for batch_scp on host "..."
PA0171 NetCDF: NetCDF4 format requested but no cpp-directive __netcdf4 given
switch back to 64-bit offset format
netcdf_data_format > 2 has been set. This requires NetCDF4 features, which have to be activated by setting the cpp-directive __netcdf4 in the configuration file (%cpp_options). It also requires a NetCDF4 library. Set -I, -L, and -l options in compile (%copts) and load (%lopts) options of the configuration file appropriately.
PA0172 no OPEN-statement for file-id ...
PA0173 wrong component: ...
PA0174 wrong argument expected: ... given:
PA0175 no time measurement defined on this host
PA0176 negative time interval occured PE ... L=PAUSE "..." new=... last=...
PA0177 negative time interval occured PE ... L=STOP "..." new=... last=... isum=...
PA0178 negative time interval occured PE ... L=STOP "..." sum=... mtime=...
PA0179 unknown modus of time measurement: ...
PA0180 unknown cross-section: ...
PA0181 no output provided for: ...
PA0182 no output available for: ...
PA0183 if humidity/passive_scalar = FALSE output of ... is not provided
PA0184 if cloud_physics = FALSE output of ... is not provided
PA0185 data_output_profiles: normalizing cross ... is not possible since one of the normalizing factors is zero! cross_normx_factor(...,...) = ... cross_normy_factor(...,...) = ...
PA0186 no spectra data available
PA0187 fft method "..." currently does not work on NEC
PA0188 no system-specific fft-call available
PA0189 fft method "..." not available
PA0190 flow_statistics is called two times within one timestep
PA0191 unknown action(s): ...
PA0192 timestep has exceeded the lower limit dt_1d = ... s simulation stopped!
PA0193 unknown initializing problem
PA0194 number of time series quantities exceeds its maximum of dots_max = ... Please increase dots_max in modules.f90.
PA0195 dvrp_username is undefined
PA0196 dvrp_output="..." not allowed
PA0197 dvrp_file="..." not allowed
PA0198 mode_dvrp="..." not allowed
PA0199 split of communicator not realized with MPI1 coupling atmosphere-ocean'
PA0200 missing dz
PA0201 dz=... <= 0.0
PA0202 grid anisotropy exceeds threshold given by only local horizontal reduction of near_wall mixing length l_wall starting from height level k = ... .
PA0203 inconsistent building parameters: bxl=... bxr=... bys=... byn=... nx=... ny=...
PA0204 no street canyon width given
PA0205 inconsistent canyon parameters: cxl=... cxr=... cwx=... ch=... nx=... ny=...
PA0206 inconsistent canyon parameters:... cys=... cyn=... cwy=... ch=... nx=... ny=...
PA0207 inconsistent canyon parameters: street canyon can only be oriented either in x- or in y-direction
PA0208 file TOPOGRAPHY_DATA does not exist
PA0209 errors in file TOPOGRAPHY_DATA
PA0210 nzb_local values are outside the model domain MINVAL( nzb_local ) = ... MAXVAL( nzb_local ) = ...
PA0211 nzb_local does not fulfill cyclic boundary condition in x-direction
PA0212 nzb_local does not fulfill cyclic boundary condition in y-direction
PA0213 max_number_of_particle_groups =... number_of_particle_groups reset to ...
PA0214 version mismatch concerning data from prior run version on file = ... version in program = ...
PA0215 particle group # ... has a density ratio /= 0 but radius = 0
PA0216 number of initial particles (...) exceeds maximum_number_of_particles (...) on PE ...
PA0217 unknown boundary condition bc_par_b = "..."
PA0218 unknown boundary condition bc_par_t = "..."
PA0219 unknown boundary condition bc_par_lr = "..."
PA0220 unknown boundary condition bc_par_ns = "..."
PA0221 number of PEs of the prescribed topology (...) does not match the number of PEs available to the job ()
PA0222 if the processor topology is prescribed by the user, both values of "npex" and "npey" must be given in the NAMELIST-parameter file
PA0223 psolver = "poisfft_hybrid" can only be used in case of a 1d-decomposition along x
PA0224 no matching grid for transpositions found
PA0225 x-direction: gridpoint number (...)is not an integral divisor of the number of procesors (...)
PA0226 x-direction: nx does not match the requirements given by the number of PEs used please use nx = ... instead of nx =...
PA0227 y-direction: gridpoint number (...) is not an integral divisor of the number of processors (...)
PA0228 y-direction: ny does not match the requirements given by the number of PEs used please use ny = ... instead of ny =...
PA0229 1d-decomposition along x chosen but nz restrictions may occur since ups-scheme is activated
PA0230 transposition z --> x: nz=... is not an integral divisior of pdims(1)= ...
PA0231 transposition x --> y: nx+1=... is not an integral divisor of pdims(2)= ...
PA0232 transposition y --> z: ny+1=... is not an integral divisor of pdims(1)=...
PA0233 transposition x --> y: ny+1=... is not an integral divisor of pdims(1)=...
PA0234 direct transposition z --> y (needed for spectra): nz=... is not an integral divisor of pdims(2)=...
PA0235 mg_switch_to_pe0_level out of range and reset to default (=0)
PA0236 not enough memory for storing gathered multigrid data on PE0
PA0237 multigrid gather/scatter impossible in non parallel mode
PA0238 more than 10 multigrid levels
PA0239 The value for "topography_grid_convention" is not set. Its default value is only valid for "topography" = ''single_building'', ''single_street_canyon'' or ''read_from_file'' Choose ''cell_edge'' or ''cell_center''.
PA0240 The value for "topography_grid_convention" is not recognized. Choose ''cell_edge'' or ''cell_center''.
PA0241 netcdf_precision must contain a "_" netcdf_precision(...)="..."
PA0242 illegal netcdf precision: netcdf_precision( ...)="..."
PA0243 unknown variable in inipar assignment: netcdf_precision(', i, ')="..."
PA0244 no grid defined for variable ...
PA0245 NetCDF file for volume data ... from previuos run found, but this file cannot be extended due to variable mismatch. New file is created instead.
PA0246 NetCDF file for volume data ... from previuos run found, but this file cannot be extended due to mismatch in number of vertical grid points (nz_do3d). New file is created instead.
PA0247 NetCDF file for volume data ... from previuos run found, but this file cannot be extended because the current output time is less or equal than the last output time on this file. New file is created instead.
PA0248 NetCDF file for volume data ... from previous run found. This file will be extended.
PA0249 NetCDF file for cross-sections ... from previuos run found, but this file cannot be extended due to variable mismatch. New file is created instead.
PA0250 NetCDF file for cross-sections ... from previuos run found, but this file cannot be extended due to mismatch in number of cross sections. New file is created instead.
PA0251 NetCDF file for cross-sections ... from previuos run found but this file cannot be extended due to mismatch in cross section levels. New file is created instead.
PA0252 NetCDF file for cross sections ... from previuos run found, but this file cannot be extended because the current output time is less or equal than the last output time on this file. New file is created instead.
PA0253 NetCDF file for cross-sections ... from previous run found. This file will be extended.
PA0254 NetCDF file for vertical profiles from previuos run found, but this file cannot be extended due to variable mismatch. New file is created instead.
PA0255 NetCDF file for vertical profiles from previuos run found, but this file cannot be extended because the current output time is less or equal than the last output time on this file. New file is created instead.
PA0256 NetCDF file for vertical profiles from previous run found. This file will be extended.
PA0257 NetCDF file for vertical profiles from previous run found. This file will be extended.
PA0258 NetCDF file for time series from previuos run found, but this file cannot be extended because the current output time is less or equal than the last output time on this file. New file is created instead.
PA0259 NetCDF file for time series from previous run found. This file will be extended.
PA0260 NetCDF file for spectra from previuos run found, but this file cannot be extended due to variable mismatch. New file is created instead.
PA0261 NetCDF file for spectra from previuos run found, but this file cannot be extended due to mismatch in number of vertical levels. New file is created instead.
PA0262 NetCDF file for spectra from previuos run found, but this file cannot be extended due to mismatch in heights of vertical levels. New file is created instead.
PA0263 NetCDF file for spectra from previuos run found, but this file cannot be extended because the current output time is less or equal than the last output time on this file. New file is created instead.
PA0264 NetCDF file for spectra from previous run found. This file will be extended.
PA0265 NetCDF file for particles from previuos run found, but this file cannot be extended because the current output time is less or equal than the last output time on this file. New file is created instead.
PA0266 NetCDF file for particles from previous run found. This file will be extended.
PA0267 NetCDF file for particle time series from previuos run found, but this file cannot be extended due to variable mismatch. New file is created instead.
PA0268 NetCDF file for particle time series from previuos run found, but this file cannot be extended because the current output time is less or equal than the last output time on this file. New file is created instead.
PA0269 NetCDF file for particle time series from previous run found. This file will be extended.
PA0270 mode "..." not supported
PA0271 errors in \$inipar ∨ no \$inipar-namelist found (CRAY-machines only)
PA0272 no \$inipar-namelist found
PA0273 no value or wrong value given for nx: nx=...
PA0274 no value or wrong value given for ny: ny=...
PA0275 no value or wrong value given for nz: nz=...
PA0276 local file ENVPAR not found some variables for steering may not be properly set
PA0277 errors in local file ENVPAR some variables for steering may not be properly set
PA0278 no envpar-NAMELIST found in local file ENVPAR some variables for steering may not be properly set
PA0279 wrong component: ...
PA0280 Number of OpenMP threads = ...
PA0281 running optimized multinode version switch_per_lpar = ... tasks_per_lpar = ... tasks_per_logical_node = ...
PA0282 parallel environment (MPI) required
PA0283 no sufficient convergence within 1000 cycles
PA0284 data from subdomain of previous run mapped more than 1000 times
PA0285 number of PEs or virtual PE-grid changed in restart run PE ... will read from files ...
PA0286 version mismatch concerning data from prior run version on file = "..." version in program = "..."
PA0287 problem with index bound nxl on restart file "..." nxl = ... but it should be = ... from the index bound information array
PA0288 problem with index bound nxr on restart file "..." nxr = ... but it should be = ... from the index bound information array
PA0289 problem with index bound nys on restart file "..." nys = .. but it should be = ... from the index bound information array
PA0290 problem with index bound nyn on restart file "..." nyn = ... but it should be = ... from the index bound information array
PA0291 mismatch between actual data and data from prior run on PE ... nzb on file = ... nzb = ...
PA0292 mismatch between actual data and data from prior run on PE ... nzt on file = ... nzt = ...
PA0293 read_3d_binary: spectrum_x on restart file ignored because total numbers of grid points (nx) do not match
PA0294 read_3d_binary: spectrum_y on restart file ignored because total numbers of grid points (ny) do not match
PA0295 unknown field named "..." found in data from prior run on PE ...
PA0296 version mismatch concerning control variables version on file = "..." version on program = "..."
PA0297 numprocs not found in data from prior run on PE ...
PA0298 hor_index_bounds not found in data from prior run on PE ...
PA0299 nz not found in data from prior run on PE ...
PA0300 max_pr_user not found in data from prior run on PE ...
PA0301 statistic_regions not found in data from prior run on PE ...
PA0302 unknown variable named "..." found in data from prior run on PE ...
PA0303 nz not found in restart data file
PA0304 mismatch concerning number of gridpoints along z nz on file = "..." nz from run = "..."
PA0305 max_pr_user not found in restart data file
PA0306 number of user profiles on restart data file differs from the current run max_pr_user on file = "..." max_pr_user from run = "..."
PA0307 statistic_regions not found in restart data file
PA0308 statistic regions on restart data file differ from the current run statistic regions on file = "..." statistic regions from run = "..." statistic data may be lost!
PA0309 inflow profiles not temporally averaged. Averaging will be done now using ... samples.
PA0310 remote model "..." terminated with terminate_coupled_remote = ... local model "..." has terminate_coupled = ...
PA0311 number of gridpoints along x or/and y contain illegal factors only factors 8,6,5,4,3,2 are allowed
PA0312 Time step has reached minimum limit.
dt = ... s Simulation is terminated.
old_dt = ... s
dt_u = ... s
dt_v = ... s
dt_w = ... s
dt_diff = ... s
u_max = ... m/s k=... j=... i=...
v_max = ... m/s k=... j=... i=...
w_max = ... m/s k=... j=... i=...

PA0313 illegal value for parameter particle_color: ...
PA0314 illegal value for parameter particle_dvrpsize: ...
PA0315 color_interval(2) <= color_interval(1)
PA0316 dvrpsize_interval(2) <= dvrpsize_interval(1)
PA0317 ocean = .F. does not allow coupling_char = ... set by mrun-option "-y"
PA0318 inflow_damping_height must be explicitly specified because the inversion height calculated by the prerun is zero
PA0319 section_xy must be <= nz + 1 = ...
PA0320 section_xz must be <= ny + 1 = ...
PA0321 section_yz must be <= nx + 1 = ...
PA0322 output of q*w*(0) requires humidity=.TRUE.
PA0323
output of averaged quantity "..." requires to set a non-zero averaging interval

PA0324
Applying large scale vertical motion is not allowed for ocean runs

UI0001 unknown location "..."
UI0002 location "..." is not allowed to be called with parameters "i" and "j"
UI0003 no output possible for: ...
UI0004 unknown mode "..."
UI0005 topography "..." not available yet
UI0006 unknown topography "..."
UI0007 canopy_mode "..." not available yet
UI0008 unknown canopy_mode "..."
UI0009 the number of user-defined profiles given in data_output_pr (...) does not match the one found in the restart file (...)
UI0010 Spectra of ... can not be calculated
UI0011 Spectra of ... are not defined
UI0012 unknown variable named "..." found in data from prior run on PE
NC**** **** contains numbers in the range from 1-444

Last change:  $Id: appendix_a.html 519 2010-03-19 05:30:02Z boeske $