!> @file uv_exposure_model_mod.f90
!------------------------------------------------------------------------------!
! This file is part of the PALM model system.
!
! PALM is free software: you can redistribute it and/or modify it under the
! terms of the GNU General Public License as published by the Free Software
! Foundation, either version 3 of the License, or (at your option) any later
! version.
!
! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
!
! You should have received a copy of the GNU General Public License along with
! PALM. If not, see .
!
! Copyright 2017-2017 Leibniz Universitaet Hannover
!------------------------------------------------------------------------------!
!
! Current revisions:
! -----------------
!
!
! Former revisions:
! -----------------
! $Id: uv_exposure_model_mod.f90 2696 2017-12-14 17:12:51Z sward $
! Initial revision
!
!
!
! Authors:
! --------
! @author Michael Schrempf
!
!
! Description:
! ------------
!> Calculation of vitamin-D weighted UV exposure
!>
!>
!> @todo uv_vitd3dose-->new output type necessary (cumulative)
!> @todo consider upwelling radiation
!>
!> @note
!>
!> @bug
!------------------------------------------------------------------------------!
MODULE uv_exposure_model_mod
USE kinds
!
!-- Load required variables from existing modules
!-- USE modulename, &
!-- ONLY: ...
IMPLICIT NONE
!
!-- Declare all global variables within the module (alphabetical order)
INTEGER(iwp) :: ai = 0 !< running index
INTEGER(iwp) :: clothing = 3 !< clothing (0=unclothed, 1=Arms,Hands Face free, 3=Hand, Face free)
INTEGER(iwp) :: consider_obstructions = 1 !< 0 = unobstructed scenario,
!< 1 = scenario where obstrcutions are considered
INTEGER(iwp) :: orientation_angle = 0 !< orientation of front/face of the human model
INTEGER(iwp) :: saa_in_south = 1 !< 0 = sun always in south direction, 1 = actual sun position
INTEGER(iwp) :: obstruction_direct_beam = 0 !< Obstruction information for direct beam
INTEGER(iwp) :: turn_to_sun = 1 !< 0 = orientation of human as in orientation_angle,
!< 1 = human is always orientated towards the sun
INTEGER(iwp) :: zi = 0 !< running index
INTEGER(iwp), DIMENSION(0:44) :: obstruction_temp1 = 0 !< temporary obstruction information
!< stored with ibset as logical information
INTEGER(iwp), DIMENSION(0:359) :: obstruction_temp2 = 0 !< temporary obstruction information restored values
!< from logical information, which where stored by ibset
INTEGER(iwp), DIMENSION(0:35,0:9) :: obstruction = 0 !< final obstruction information array for all
!< hemispherical directions
INTEGER(KIND=1), DIMENSION(:,:,:), ALLOCATABLE :: obstruction_lookup_table !< lookup table of obstruction
!< information of entire domain
REAL(wp) :: diffuse_exposure = 0.0_wp !< calculated exposure by diffuse radiation
REAL(wp) :: direct_exposure = 0.0_wp !< calculated exposure by direct beam
REAL(wp) :: projection_area_direct_beam = 0.0_wp !< projection area for by direct beam
REAL(wp) :: saa = 180.0_wp !< solar azimuth angle
REAL(wp) :: startpos_human = 0.0_wp !< start position in azimuth direction for the
!< interpolation of the projection area
REAL(wp) :: startpos_saa_float = 0.0_wp !< start position in azimuth direction for the
!< interpolation of the radiance field
REAL(wp) :: sza = 20.0_wp !< solar zenith angle
REAL(wp) :: xfactor = 0.0_wp !< relative x-position used for interpolation
REAL(wp) :: yfactor = 0.0_wp !< relative y-position used for interpolation
REAL(wp), DIMENSION(0:2) :: irradiance = 0.0_wp !< iradiance values extracted from irradiance lookup table
REAL(wp), DIMENSION(0:2,0:90) :: irradiance_lookup_table = 0.0_wp !< irradiance lookup table contains values
!< for direct, diffuse and global component
REAL(wp), DIMENSION(0:35,0:9) :: integration_array = 0.0_wp
REAL(wp), DIMENSION(0:35,0:9) :: projection_area = 0.0_wp
REAL(wp), DIMENSION(0:35,0:9) :: projection_area_lookup_table = 0.0_wp
REAL(wp), DIMENSION(0:71,0:9) :: projection_area_temp = 0.0_wp
REAL(wp), DIMENSION(0:35,0:9) :: radiance_array = 0.0_wp
REAL(wp), DIMENSION(0:71,0:9) :: radiance_array_temp = 0.0_wp
REAL(wp), DIMENSION(:,:), ALLOCATABLE :: vitd3_exposure
REAL(wp), DIMENSION(:,:), ALLOCATABLE :: vitd3_exposure_av
REAL(wp), DIMENSION(0:35,0:9,0:90) :: radiance_lookup_table = 0.0_wp
SAVE
PRIVATE
!
!-- Add INTERFACES that must be available to other modules (alphabetical order)
PUBLIC uvem_3d_data_averaging, uvem_calc_exposure, uvem_check_data_output, &
uvem_data_output_2d, uvem_define_netcdf_grid, uvem_init, &
uvem_init_arrays, uvem_parin
!
!-- Add VARIABLES that must be available to other modules (alphabetical order)
! PUBLIC
!
!-- Add PROGNOSTIC QUANTITIES that must be available to other modules (alphabetical order)
!-- PUBLIC ...
!
!-- Default procedures for all new modules (not all are necessarily required,
!-- alphabetical order is not essential)
!
!-- PALM interfaces:
!-- Data output checks for 2D/3D data to be done in check_parameters
INTERFACE uvem_check_data_output
MODULE PROCEDURE uvem_check_data_output
END INTERFACE uvem_check_data_output
! !
! !-- Data output checks for profile data to be done in check_parameters
! INTERFACE uvem_check_data_output_pr
! MODULE PROCEDURE uvem_check_data_output_pr
! END INTERFACE uvem_check_data_output_pr
!
! !
! !-- Input parameter checks to be done in check_parameters
! INTERFACE uvem_check_parameters
! MODULE PROCEDURE uvem_check_parameters
! END INTERFACE uvem_check_parameters
!
!
!-- Averaging of 3D data for output
INTERFACE uvem_3d_data_averaging
MODULE PROCEDURE uvem_3d_data_averaging
END INTERFACE uvem_3d_data_averaging
!
! !
!-- Data output of 2D quantities
INTERFACE uvem_data_output_2d
MODULE PROCEDURE uvem_data_output_2d
END INTERFACE uvem_data_output_2d
!
! !
! !-- Data output of 3D data
! INTERFACE uvem_data_output_3d
! MODULE PROCEDURE uvem_data_output_3d
! END INTERFACE uvem_data_output_3d
!
! !
! !-- Definition of data output quantities
INTERFACE uvem_define_netcdf_grid
MODULE PROCEDURE uvem_define_netcdf_grid
END INTERFACE uvem_define_netcdf_grid
!
! !
! !-- Output of information to the header file
! INTERFACE uvem_header
! MODULE PROCEDURE uvem_header
! END INTERFACE uvem_header
!
!-- Initialization actions
INTERFACE uvem_init
MODULE PROCEDURE uvem_init
END INTERFACE uvem_init
!
!-- Initialization of arrays
INTERFACE uvem_init_arrays
MODULE PROCEDURE uvem_init_arrays
END INTERFACE uvem_init_arrays
!
! !
! !-- Writing of binary output for restart runs !!! renaming?!
! INTERFACE uvem_last_actions
! MODULE PROCEDURE uvem_last_actions
! END INTERFACE uvem_last_actions
!
!
!-- Reading of NAMELIST parameters
INTERFACE uvem_parin
MODULE PROCEDURE uvem_parin
END INTERFACE uvem_parin
!
! !
! !-- Reading of parameters for restart runs
! INTERFACE uvem_read_restart_data
! MODULE PROCEDURE uvem_read_restart_data
! END INTERFACE uvem_read_restart_data
!
! !
! !-- Writing of parameters for restart runs !!! renaming?!
! INTERFACE uvem_skip_var_list
! MODULE PROCEDURE uvem_skip_var_list
! END INTERFACE uvem_skip_var_list
!
! !
! !-- Swapping of time levels (required for prognostic variables)
! INTERFACE uvem_swap_timelevel
! MODULE PROCEDURE uvem_swap_timelevel
! END INTERFACE uvem_swap_timelevel
!
! !
! !-- New module-specific procedure(s) (alphabetical order):
! INTERFACE uvem_newprocedure
! MODULE PROCEDURE uvem_newprocedure
! END INTERFACE uvem_newprocedure
CONTAINS
!------------------------------------------------------------------------------!
! Description:
! ------------
!> Check data output for new module.
!------------------------------------------------------------------------------!
SUBROUTINE uvem_check_data_output( var, unit, i, ilen, k )
USE control_parameters, &
ONLY: data_output, message_string, uv_exposure
IMPLICIT NONE
CHARACTER (LEN=*) :: unit !< string for unit of output quantity
CHARACTER (LEN=*) :: var !< string for output quantity
INTEGER(iwp) :: i !<
INTEGER(iwp) :: ilen !<
INTEGER(iwp) :: k !<
SELECT CASE ( TRIM( var ) )
CASE ( 'uvem_vitd3*' )
IF ( .NOT. uv_exposure ) THEN
message_string = 'output of "' // TRIM( var ) // '" requi' // &
'res a namelist &uvexposure_par'
CALL message( 'uvem_check_data_output', 'UV0001', 1, 2, 0, 6, 0 )
ENDIF
IF ( k == 0 .OR. data_output(i)(ilen-2:ilen) /= '_xy' ) THEN
message_string = 'illegal value for data_output: "' // &
TRIM( var ) // '" & only 2d-horizontal ' // &
'cross sections are allowed for this value'
CALL message( 'check_parameters', 'PA0111', 1, 2, 0, 6, 0 )
ENDIF
unit = 'IU/s'
CASE ( 'uvem_vitd3dose*' )
IF ( .NOT. uv_exposure ) THEN
message_string = 'output of "' // TRIM( var ) // '" requi' // &
'res a namelist &uvexposure_par'
CALL message( 'uvem_check_data_output', 'UV0001', 1, 2, 0, 6, 0 )
ENDIF
IF ( k == 0 .OR. data_output(i)(ilen-2:ilen) /= '_xy' ) THEN
message_string = 'illegal value for data_output: "' // &
TRIM( var ) // '" & only 2d-horizontal ' // &
'cross sections are allowed for this value'
CALL message( 'check_parameters', 'PA0111', 1, 2, 0, 6, 0 )
ENDIF
unit = 'IU/av-h'
CASE DEFAULT
unit = 'illegal'
END SELECT
END SUBROUTINE uvem_check_data_output
!-----------------------------------------------------------------------------!
!
! Description:
! ------------
!> Subroutine defining 2D output variables
!-----------------------------------------------------------------------------!
SUBROUTINE uvem_data_output_2d( av, variable, found, grid, mode, local_pf, &
two_d, nzb_do, nzt_do )
USE indices
USE kinds
IMPLICIT NONE
CHARACTER (LEN=*) :: grid !<
CHARACTER (LEN=*) :: mode !<
CHARACTER (LEN=*) :: variable !<
INTEGER(iwp) :: av !<
INTEGER(iwp) :: i !< running index
INTEGER(iwp) :: j !< running index
INTEGER(iwp) :: k !< running index
INTEGER(iwp) :: m !< running index
INTEGER(iwp) :: nzb_do !<
INTEGER(iwp) :: nzt_do !<
LOGICAL :: found !<
LOGICAL :: two_d !< flag parameter that indicates 2D variables (horizontal cross sections)
REAL(wp), DIMENSION(nxl:nxr,nys:nyn,nzb:nzt+1) :: local_pf !<
found = .TRUE.
SELECT CASE ( TRIM( variable ) )
!
!-- Before data is transfered to local_pf, transfer is it 2D dummy variable and exchange ghost points therein.
!-- However, at this point this is only required for instantaneous arrays, time-averaged quantities are already exchanged.
CASE ( 'uvem_vitd3*_xy' ) ! 2d-array
IF ( av == 0 ) THEN
DO i = nxl, nxr
DO j = nys, nyn
local_pf(i,j,nzb+1) = vitd3_exposure(j,i)
ENDDO
ENDDO
ENDIF
two_d = .TRUE.
grid = 'zu1'
CASE ( 'uvem_vitd3dose*_xy' ) ! 2d-array
IF ( av == 1 ) THEN
DO i = nxl, nxr
DO j = nys, nyn
local_pf(i,j,nzb+1) = vitd3_exposure_av(j,i)
ENDDO
ENDDO
ENDIF
two_d = .TRUE.
grid = 'zu1'
CASE DEFAULT
found = .FALSE.
grid = 'none'
END SELECT
END SUBROUTINE uvem_data_output_2d
!------------------------------------------------------------------------------!
!
! Description:
! ------------
!> Subroutine defining appropriate grid for netcdf variables.
!> It is called out from subroutine netcdf.
!------------------------------------------------------------------------------!
SUBROUTINE uvem_define_netcdf_grid( var, found, grid_x, grid_y, grid_z )
IMPLICIT NONE
CHARACTER (LEN=*), INTENT(IN) :: var !<
CHARACTER (LEN=*), INTENT(OUT) :: grid_x !<
CHARACTER (LEN=*), INTENT(OUT) :: grid_y !<
CHARACTER (LEN=*), INTENT(OUT) :: grid_z !<
LOGICAL, INTENT(OUT) :: found !<
found = .TRUE.
!
!-- Check for the grid
SELECT CASE ( TRIM( var ) )
CASE ( 'uvem_vitd3*_xy', 'uvem_vitd3dose*_xy' )
grid_x = 'x'
grid_y = 'y'
grid_z = 'zu1'
CASE DEFAULT
found = .FALSE.
grid_x = 'none'
grid_y = 'none'
grid_z = 'none'
END SELECT
END SUBROUTINE uvem_define_netcdf_grid
!------------------------------------------------------------------------------!
! Description:
! ------------
!> Parin for &uvexposure_par for UV exposure model
!------------------------------------------------------------------------------!
SUBROUTINE uvem_parin
USE control_parameters, &
ONLY: uv_exposure
IMPLICIT NONE
CHARACTER (LEN=80) :: line !< dummy string for current line in parameter file
NAMELIST /uvexposure_par/ clothing
line = ' '
!
!-- Try to find uv exposure model namelist
REWIND ( 11 )
line = ' '
DO WHILE ( INDEX( line, '&uvexposure_par' ) == 0 )
READ ( 11, '(A)', END=10 ) line
ENDDO
BACKSPACE ( 11 )
!
!-- Read user-defined namelist
READ ( 11, uvexposure_par )
!
!-- Set flag that indicates that the uv exposure model is switched on
uv_exposure = .TRUE.
10 CONTINUE
END SUBROUTINE uvem_parin
!------------------------------------------------------------------------------!
!
! Description:
! ------------
!> Subroutine for averaging 3D data
!------------------------------------------------------------------------------!
SUBROUTINE uvem_3d_data_averaging( mode, variable )
USE control_parameters
USE indices
USE kinds
IMPLICIT NONE
CHARACTER (LEN=*) :: mode !<
CHARACTER (LEN=*) :: variable !<
INTEGER(iwp) :: i !<
INTEGER(iwp) :: j !<
INTEGER(iwp) :: k !<
INTEGER(iwp) :: m !< running index
IF ( mode == 'allocate' ) THEN
SELECT CASE ( TRIM( variable ) )
CASE ( 'uvem_vitd3dose*' )
IF ( .NOT. ALLOCATED( vitd3_exposure_av ) ) THEN
ALLOCATE( vitd3_exposure_av(nysg:nyng,nxlg:nxrg) )
ENDIF
vitd3_exposure_av = 0.0_wp
CASE DEFAULT
CONTINUE
END SELECT
ELSEIF ( mode == 'sum' ) THEN
SELECT CASE ( TRIM( variable ) )
CASE ( 'uvem_vitd3dose*' )
DO i = nxlg, nxrg
DO j = nysg, nyng
vitd3_exposure_av(j,i) = vitd3_exposure_av(j,i) + vitd3_exposure(j,i)
ENDDO
ENDDO
CASE DEFAULT
CONTINUE
END SELECT
!
!-- No averaging since we are calculating a dose (only sum is calculated and saved to
!-- av.nc file)
! ELSEIF ( mode == 'average' ) THEN
ENDIF
END SUBROUTINE uvem_3d_data_averaging
!------------------------------------------------------------------------------!
! Description:
! ------------
!> Initialization of the new module
!------------------------------------------------------------------------------!
SUBROUTINE uvem_init
USE control_parameters, &
ONLY: initializing_actions
IMPLICIT NONE
!
!-- Actions for initial runs
IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
OPEN(90, STATUS='old',FILE=&
'RADIANCE', FORM='UNFORMATTED')
READ(90) radiance_lookup_table
CLOSE(90)
OPEN(90, STATUS='old',FILE=&
'IRRADIANCE', FORM='UNFORMATTED')
READ(90) irradiance_lookup_table
CLOSE(90)
!________________________LOAD Obstruction information _______________________________
IF ( consider_obstructions == 1 ) THEN
OPEN(90, STATUS='old',FILE=&
'OBSTRUCTION', FORM='UNFORMATTED')
READ(90) obstruction_lookup_table
CLOSE(90)
ELSEIF( consider_obstructions == 0 ) THEN
obstruction(:,:) = 1
ENDIF
!________________________LOAD integration_array ________________________________________________________________________
OPEN(90, STATUS='old',FILE=&
'SOLIDANGLE', FORM='UNFORMATTED')
READ(90) integration_array
CLOSE(90)
IF (clothing==1) THEN
OPEN(90, STATUS='old',FILE='HUMAN', FORM='UNFORMATTED')
ENDIF
READ(90) projection_area_lookup_table
CLOSE(90)
!
!-- Actions for restart runs
ELSE
! ....
ENDIF
END SUBROUTINE uvem_init
!-----------------------------------------------------------------------------!
! Description:
! ------------
!> Allocate new module arrays and define pointers if required
!-----------------------------------------------------------------------------!
SUBROUTINE uvem_init_arrays
USE indices, &
ONLY: nxlg, nxrg, nyng, nysg
IMPLICIT NONE
!
!-- Allocate arrays
ALLOCATE ( vitd3_exposure(nysg:nyng,nxlg:nxrg) )
ALLOCATE ( vitd3_exposure_av(nysg:nyng,nxlg:nxrg) )
ALLOCATE ( obstruction_lookup_table(nxlg:nxrg,nysg:nyng,0:44) )
!
!-- Initialize arrays
vitd3_exposure = 0.0_wp
vitd3_exposure_av = 0.0_wp
obstruction_lookup_table = 0
END SUBROUTINE uvem_init_arrays
!------------------------------------------------------------------------------!
! Description:
! ------------
!> Module-specific routine for new module
!------------------------------------------------------------------------------!
SUBROUTINE uvem_solar_position
USE constants, &
ONLY: pi
USE date_and_time_mod, &
ONLY: calc_date_and_time, day_of_year, time_utc
USE control_parameters, &
ONLY: latitude, longitude
IMPLICIT NONE
REAL(wp) :: alpha = 0.0_wp !< solar azimuth angle in radiant
REAL(wp) :: declination = 0.0_wp !< declination
REAL(wp) :: dtor = 0.0_wp !< factor to convert degree to radiant
REAL(wp) :: js = 0.0_wp !< parameter for solar position calculation
REAL(wp) :: lat = 52.39_wp !< latitude
REAL(wp) :: lon = 9.7_wp !< longitude
REAL(wp) :: thetar = 0.0_wp !< angle for solar zenith angle calculation
REAL(wp) :: thetasr = 0.0_wp !< angle for solar azimuth angle calculation
REAL(wp) :: zgl = 0.0_wp !< calculated exposure by direct beam
REAL(wp) :: woz = 0.0_wp !< calculated exposure by diffuse radiation
REAL(wp) :: wsp = 0.0_wp !< calculated exposure by direct beam
CALL calc_date_and_time
dtor = pi / 180.0_wp
lat = latitude
lon = longitude
!
!-- calculation of js :
js= 72.0_wp * ( day_of_year + ( time_utc / 86400.0_wp ) ) / 73.0_wp
!
!-- calculation of equation of time (zgl):
zgl = 0.0066_wp + 7.3525_wp * cos( ( js + 85.9_wp ) * dtor ) + 9.9359_wp * &
cos( ( 2.0_wp * js + 108.9_wp ) * dtor ) + 0.3387_wp * cos( ( 3 * js + 105.2_wp ) * dtor )
!
!-- calculation of apparent solar time woz:
woz = ( ( time_utc / 3600.0_wp ) - ( 4.0_wp * ( 15.0_wp - lon ) ) / 60.0_wp ) + ( zgl / 60.0_wp )
!
!-- calculation of hour angle (wsp):
wsp = ( woz - 12.0_wp ) * 15.0_wp
!
!-- calculation of declination:
declination = 0.3948_wp - 23.2559_wp * cos( ( js + 9.1_wp ) * dtor ) - &
0.3915_wp * cos( ( 2.0_wp * js + 5.4_wp ) * dtor ) - 0.1764_wp * cos( ( 3.0_wp * js + 26.0_wp ) * dtor )
!
!-- calculation of solar zenith angle
thetar = acos( sin( lat * dtor) * sin( declination * dtor ) + cos( wsp * dtor ) * &
cos( lat * dtor ) * cos( declination * dtor ) )
thetasr = asin( sin( lat * dtor) * sin( declination * dtor ) + cos( wsp * dtor ) * &
cos( lat * dtor ) * cos( declination * dtor ) )
sza = thetar / dtor
!
!-- calculation of solar azimuth angle
IF (woz .LE. 12.0_wp) alpha = pi - acos( sin(thetasr) * sin(lat * dtor) - &
sin( declination * dtor ) / ( cos(thetasr) * cos( lat * dtor ) ) )
IF (woz .GT. 12.0_wp) alpha = pi + acos( sin(thetasr) * sin(lat * dtor) - &
sin( declination * dtor ) / ( cos(thetasr) * cos( lat * dtor ) ) )
saa = alpha / dtor
END SUBROUTINE uvem_solar_position
!------------------------------------------------------------------------------!
! Description:
! ------------
!> Module-specific routine for new module
!------------------------------------------------------------------------------!
SUBROUTINE uvem_calc_exposure
USE constants, &
ONLY: pi
USE indices, &
ONLY: nxlg, nxrg, nyng, nysg
IMPLICIT NONE
INTEGER(iwp) :: i !< running index
INTEGER(iwp) :: j !< running index
CALL uvem_solar_position
IF (sza .GE. 90) THEN
vitd3_exposure(:,:) = 0.0_wp
ELSE
!
!-- rotate 3D-Model human to desired direction -----------------------------
projection_area_temp( 0:35,:) = projection_area_lookup_table
projection_area_temp(36:71,:) = projection_area_lookup_table
IF ( Turn_to_Sun .EQ. 0 ) startpos_human = orientation_angle / 10.0_wp
IF ( Turn_to_Sun .EQ. 1 ) startpos_human = startpos_saa_float
DO ai = 0, 35
xfactor = ( startpos_human ) - INT( startpos_human )
DO zi = 0, 9
projection_area(ai,zi) = ( projection_area_temp( ai + INT( startpos_human ), zi) * &
(1.0_wp - xfactor ) ) &
+( projection_area_temp( ai + 1 + INT( startpos_human ), zi) * &
xfactor)
ENDDO
ENDDO
!
!-- calculate Projectionarea for direct beam -----------------------------'
projection_area_temp( 0:35,:) = projection_area
projection_area_temp(36:71,:) = projection_area
yfactor = ( sza / 10.0_wp ) - INT( sza / 10.0_wp )
xfactor = ( startpos_saa_float ) - INT( startpos_saa_float )
projection_area_direct_beam = ( projection_area_temp( INT(startpos_saa_float) ,INT( sza / 10.0_wp ) ) * &
( 1.0_wp - xfactor ) * ( 1.0_wp - yfactor ) ) + &
( projection_area_temp( INT(startpos_saa_float) + 1,INT(sza/10.0_wp)) *&
( xfactor ) * ( 1.0_wp - yfactor ) ) + &
( projection_area_temp( INT(startpos_saa_float) ,INT(sza/10.0_wp)+1)*&
( 1.0_wp - xfactor ) * ( yfactor ) ) + &
( projection_area_temp( INT(startpos_saa_float) + 1,INT(sza/10.0_wp)+1)*&
( xfactor ) * ( yfactor ) )
!
!-- interpolate to accurate Solar Zenith Angle ------------------
DO ai = 0, 35
xfactor = (sza)-INT(sza)
DO zi = 0, 9
radiance_array(ai,zi) = ( radiance_lookup_table(ai, zi, INT(sza) ) * ( 1.0_wp - xfactor) ) +&
( radiance_lookup_table(ai,zi,INT(sza) + 1) * xfactor )
ENDDO
ENDDO
Do ai = 0, 2
irradiance(ai) = ( irradiance_lookup_table(ai, INT(sza) ) * ( 1.0_wp - xfactor)) + &
(irradiance_lookup_table(ai, INT(sza) + 1) * xfactor )
ENDDO
!
!-- interpolate to accurate Solar Azimuth Angle ------------------
IF ( saa_in_south .EQ. 0 ) THEN
startpos_saa_float = 180.0_wp / 10.0_wp
ELSE
startpos_saa_float = saa / 10.0_wp
ENDIF
radiance_array_temp( 0:35,:) = radiance_array
radiance_array_temp(36:71,:) = radiance_array
xfactor = (startpos_saa_float) - INT(startpos_saa_float)
DO ai = 0, 35
DO zi = 0, 9
radiance_array(ai,zi) = ( radiance_array_temp( ai + INT( startpos_saa_float ), zi ) * &
(1.0_wp - xfactor)) &
+ ( radiance_array_temp( ai + 1 + INT( startpos_saa_float ), zi ) &
* xfactor)
ENDDO
ENDDO
DO i = nxlg, nxrg
DO j = nysg, nyng
!
!-- extract obstrcution from IBSET-Integer_Array ------------------'
IF (consider_obstructions == 1) THEN
obstruction_temp1 = obstruction_lookup_table(i,j,:)
IF (obstruction_temp1(0) .NE. 9) THEN
DO zi = 0, 44
DO ai = 0, 7
IF ( btest( obstruction_temp1(zi), ai ) .EQV. .TRUE.) THEN
obstruction_temp2( ( zi * 8 ) + ai ) = 1
ELSE
obstruction_temp2( ( zi * 8 ) + ai ) = 0
ENDIF
ENDDO
ENDDO
DO zi = 0, 9
obstruction(:,zi) = obstruction_temp2( zi * 36 :( zi * 36) + 35 )
ENDDO
ELSE
obstruction(:,:) = 0
ENDIF
ENDIF
!
!-- calculated human exposure ------------------'
diffuse_exposure = SUM( radiance_array * projection_area * integration_array * obstruction )
obstruction_direct_beam = obstruction( nint(startpos_saa_float), nint( sza / 10.0_wp ) )
IF (sza .GE. 89.99_wp) THEN
sza = 89.99999_wp
ENDIF
!
!-- calculate direct normal irradiance (direct beam) ------------------'
direct_exposure = ( irradiance(1) / cos( pi * sza / 180.0_wp ) ) * &
projection_area_direct_beam * obstruction_direct_beam
vitd3_exposure(j,i) = ( diffuse_exposure + direct_exposure ) / 1000.0_wp * 70.97_wp
! unit = international units vitamin D per second
ENDDO
ENDDO
ENDIF
END SUBROUTINE uvem_calc_exposure
! ------------------------------------------------------------------------------!
! Description:
! ------------
! > Check parameters routine
! ------------------------------------------------------------------------------!
! SUBROUTINE uvem_check_parameters
!
! USE control_parameters, &
! ONLY: message_string
!
!
! IMPLICIT NONE
!
!
! -- Checks go here (cf. check_parameters.f90).
!
! END SUBROUTINE uvem_check_parameters
! !------------------------------------------------------------------------------!
! ! Description:
! ! ------------
! !> Header output
! !------------------------------------------------------------------------------!
! SUBROUTINE uvem_header ( io )
!
!
! IMPLICIT NONE
!
!
! INTEGER(iwp), INTENT(IN) :: io !< Unit of the output file
!
! !
! !-- Header output goes here
! !-- ...
!
! END SUBROUTINE uvem_header
! !------------------------------------------------------------------------------!
! ! Description:
! ! ------------
! !> This routine reads the respective restart data.
! !------------------------------------------------------------------------------!
! SUBROUTINE uvem_read_restart_data
!
!
! IMPLICIT NONE
!
! CHARACTER (LEN=30) :: variable_chr !< dummy variable to read string
!
!
! READ ( 13 ) variable_chr
! DO WHILE ( TRIM( variable_chr ) /= '*** end new module ***' )
!
! SELECT CASE ( TRIM( variable_chr ) )
!
! ! CASE ( 'param1' )
! ! IF ( .NOT. ALLOCATED( param1 ) ) ALLOCATE( param1(...) )
! ! READ ( 13 ) param1
!
! END SELECT
!
! READ ( 13 ) variable_chr
!
! ENDDO
!
! END SUBROUTINE uvem_read_restart_data
! !------------------------------------------------------------------------------!
! ! Description:
! ! ------------
! !> This routine writes the respective restart data.
! !------------------------------------------------------------------------------!
! SUBROUTINE uvem_last_actions
!
! IMPLICIT NONE
!
! ! WRITE ( 14 ) 'param1 '
! ! WRITE ( 14 ) param1
!
!
! WRITE ( 14 ) '*** end new module *** '
!
! END SUBROUTINE uvem_last_actions
! !------------------------------------------------------------------------------!
! ! Description:
! ! ------------
! !> Skipping of parameters from restart file (binary format).
! !------------------------------------------------------------------------------!
! SUBROUTINE uvem_skip_var_list
!
! IMPLICIT NONE
!
! CHARACTER (LEN=1) :: param2 !<
! CHARACTER (LEN=30) :: variable_chr !<
!
! READ ( 13 ) variable_chr
! DO WHILE ( TRIM( variable_chr ) /= '*** end new module ***' )
! READ ( 13 ) param2
! ENDDO
!
! END SUBROUTINE uvem_skip_var_list
END MODULE uv_exposure_model_mod