source: palm/tags/release-3.7a/SCRIPTS/mbuild @ 3636

Last change on this file since 3636 was 475, checked in by raasch, 14 years ago

make options can be set in configuration file; bugfix for generating serial jobs; bugfix for masked output

  • Property svn:keywords set to Id Rev
File size: 45.8 KB
Line 
1#!/bin/ksh
2# mbuild - Programmuebersetzungsscript
3# $Id: mbuild 475 2010-02-04 02:26:16Z raasch $
4
5     # Prozedur zur Uebersetzung von Programmteilen mittels make-Mechanismus
6     # auf einem Remote-Rechner, ausgehend von Quellcode auf einem lokalen
7     # Rechner
8
9     # Folgende Probleme existieren unter Linux, wenn keine AT&T-Korn-Shell
10     # verwendet wird:
11     # Wertzuweisungen an Variablen innerhalb von DO-Schleifen werden nicht
12     # nach aussen weitergegeben. "while read line" funktioniert nicht
13     # innerhalb einer Pipe.
14
15     # letzte Aenderung:
16     # 06/05/02 - Siggi - Beginn der Entwicklung
17     # 12/06/02 - Siggi - Abschluss der Entwicklungsarbeiten
18     # 23/06/02 - Siggi - voerst kein make-clean, Abbruch bei batch-mode
19     # 24/07/02 - Siggi - Keine Verwendung der temporaeren Datei tmp_mbuild
20     #                    unter linux mehr noetig, da nun AT&T-Korn-Shell
21     #                    benutzt wird
22     # 12/09/02 - Siggi - ibmh (hanni.hlrn.de) validiert
23     # 19/12/02 - Siggi - ibmb validiert
24     # 05/02/03 - Siggi - hostname nobela included
25     # 04/03/03 - Siggi - host nech included
26     # 06/03/03 - Siggi - make_call_string is echoed without '' to
27     #                    file LAST_MAKE_CALL (otherwise error on NEC, because
28     #                    '' are part of compiler options
29     # 16/03/03 - Siggi - Two underscores are placed in front of every define
30     #                    string, in case that palm.f90 version contains
31     #                    such strings
32     # 16/04/03 - Siggi - First extensions for linux machines
33     # 24/06/03 - Siggi - host orkan included
34     # 17/07/03 - Siggi - IP adress set to new "cross" machine at DKRZ
35     # 24/07/03 - Siggi - host maestro admitted
36     # 06/08/03 - Siggi - host gregale admitted
37     # 05/11/03 - Siggi - hosts irifi and quanero are now belonging to lcmuk
38     # 19/11/03 - Heiko - on lcmuk, mbuild does not tar the *.i files
39     # 08/01/04 - Siggi - additional preprocessor directive for ibm included
40     #                    (-D$OMP=OMP) in order to avoid problems with
41     #                    OMP_NUM_THREADS
42     # 09/01/04 - Siggi - action above cancelled
43     # 28/01/04 - Siggi - action above re-cancelled
44     # 08/03/04 - Siggi - host scirocco admitted
45     # 26/03/04 - Siggi - .o and .mod files are also deleted in depository, if
46     #                    the respective .f90 file is not listed in the makefile
47     #                    and deletion is demanded by the user
48     # 12/04/04 - Siggi - scp2 instead of scp used for transfer from decalpha
49     #                    due to error in ssh installation (otherwise a prompt
50     #                    for the password appears)
51     # 23/07/04 - Siggi - changes due to the new berni configuration
52     #                    (federation switch)
53     # 08/09/04 - Siggi - hanni IP address changed to 130.75.4.10
54     # 23/09/04 - Joerg - correction of IP-Address for 'cross' (DKRZ)
55     # 09/03/05 - Siggi - on nech, mbuild does not tar the *.i files
56     # 31/03/05 - Siggi - mbuild does not tar *.i files any more
57     # 24/04/05 - Siggi - netcdf support on lcmuk
58     # 25/04/05 - Siggi - netcdf support on gfdl3 (decalpha)
59     # 12/05/05 - Siggi - netcdf support on ibm
60     #                    set OBJECT_MODE=64 for compiling on ibmb, ibmh
61     # 18/05/05 - Siggi - netcdf support on nec
62     # 19/05/05 - Siggi - IP addres 134.75.155.74 changed to 165.132.26.56
63     # 23/05/05 - Siggi - netcdf support on ibms
64     # 01/06/05 - Siggi - reset of cpp_options to "" on lcmuk
65     # 30/06/05 - Siggi - netcdf support on bora
66     # 20/10/05 - Siggi - update of netcdf-version on decalpha (gfdl3)
67     # 04/11/05 - Siggi - netcdf 3.6.0-p1 on ibmh/ibmb
68     # 30/12/05 - Siggi - change of IP adresses in subnet 130.75.105
69     #                    host gfdl5 (ibmy) admitted
70     # 10/01/06 - Siggi - cpp directive for NetCDF 64bit support
71     # 20/01/06 - Siggi - cpp directive for ibmy
72     # 09/02/06 - Marcus- compile only once on lcmuk (as on ibmh/ibmb)
73     # 10/02/06 - Siggi - modifications for scp on decalpha
74     # 13/04/06 - Siggi - ostria admitted
75     # 19/04/06 - Siggi - preprocessor directive -D$OMP=OMP for ibm removed
76     # 23/05/05 - Siggi - lctit (SUN Fire X4600) admitted
77     # 29/05/05 - Siggi - atmos (lcide) admitted
78     # 23/08/06 - Siggi - netcdf support for scirocco (notebook)
79     # 24/11/06 - Siggi - breva and levanto admitted
80     # 07/02/07 - Siggi - adapted for RIAM (neck)
81     # 10/02/07 - Siggi - all hpmuk-related code removed
82     # 02/03/07 - Siggi - compilation of utility programs and transfer of
83     #                    scripts to remote hosts added (option -u)
84     # 14/03/07 - Siggi - fimm admitted, revision number added to terminal
85     #                    output
86     # 16/03/07 - Siggi - adjustments (netcdf) for lctit
87     #                    adjustments for running under pdksh, local ip-addres
88     #                    is not determined any more
89     # 30/03/07 - Siggi - cpp-directives/options + netcdf-options are read
90     #                    from configuration file
91     #                    host identifier (local_host) is read from config file
92     # 10/10/07 - Siggi - bugfix: handling of comment lines
93     # 18/07/08 - Siggi - adapted for lcsgih
94     # 21/07/08 - Siggi - mainprog (executable) is added to the tar-file
95     #                    ({mainprog}_current_version)
96     # 02/10/08 - Siggi - adapted for lcxt4
97     # 14/11/08 - Siggi - update mechanism completely revised: source tarfile
98     #                    remains in source directory, one depository per block
99     #                    (given in the config-file) is created, allways all
100     #                    files from the source directory are copied to the
101     #                    respective depository, no additional file checks are
102     #                    done any more (version 2.1)
103     # 13/01/09 - Marcus- re-enable compilation more than once on lcmuk (as on
104     #                    other machines)
105     # 21/03/09 - Siggi - -u copies also copies process_dvr_output and
106     #                    .dvrserver.config
107     # 21/04/09 - Siggi - adjustments for new IBM at DKRZ, which is now ibmh
108     # 25/08/09 - BjornM- adapted for lck
109     # 01/12/09 - BjornM- re-adjustments for lcxt4
110     # 01/02/10 - Siggi - adjustments for lcxt5m
111     # 03/02/10 - Siggi - make options (mopts) to be set by configuration file
112     #                    implemented, remoted mode option -r completely
113     #                    removed, t3e related parts removed
114
115
116
117    # VARIABLENVEREINBARUNGEN + DEFAULTWERTE
118 compile_utility_programs=false
119 config_file=.mrun.config
120 fimm=false
121 host=all
122 host_found=false
123 locat=normal
124 makefile=""
125 scirocco=false
126 silent=false
127 suf=f90
128 update=false
129 working_directory=`pwd`
130
131 typeset -i  ih ihost=0
132
133 typeset  -R30 calltime
134 typeset  -L20 column1
135 typeset  -L50 column2
136 typeset  -L70 column3
137 typeset  -L40 version="MBUILD  2.1  Rev$Rev: 475 $"
138
139    # FEHLERBEHANDLUNG
140    # BEI EXIT:
141 trap 'rm -rf  $working_directory/tmp_mbuild
142       if [[ $locat != normal ]]
143       then
144          printf "\n\n +++ mbuild killed \n\n"
145       else
146          printf "\n\n *** mbuild finished \n\n"
147       fi' exit
148
149
150    # BEI TERMINAL-BREAK:
151 trap 'rm -rf  $working_directory/tmp_mbuild
152       printf "\n\n +++ mbuild killed by \"^C\" \n\n"
153       exit
154      ' 2
155
156
157 tmp_mbuild=${working_directory}/tmp_mbuild
158
159    # SHELLSCRIPT-OPTIONEN EINLESEN
160 while  getopts  :c:h:m:s:u  option
161 do
162   case  $option  in
163       (c)   config_file=$OPTARG;;
164       (h)   host=$OPTARG;;
165       (m)   makefile=$OPTARG;;
166       (s)   suf=$OPTARG;;
167       (u)   compile_utility_programs=true;;
168       (\?)  printf "\n  +++ unknown option $OPTARG \n";
169             locat=parameter; exit;;
170   esac
171 done
172
173
174
175    # PRUEFEN, OB KONFIGURATIONS-DATEI VORHANDEN
176 if [[ ! -f $config_file ]]
177 then
178    printf "\n  +++ configuration file: "
179    printf "\n           $config_file"
180    printf "\n      does not exist"
181    locat=configuration; exit 
182 fi
183
184
185
186    # LOKALEN RECHNER ERMITTELN
187 local_host_real_name=$(hostname)
188# local_addres=$(nslookup `hostname` 2>&1 | grep "Address:" | tail -1 | awk '{print $2}')
189
190
191
192    # HOST-IDENTIFIER (local_host) AUS KONFIGURATIONSDATEI BESTIMMEN
193 line=""
194 grep  "%host_identifier"  $config_file  >  $tmp_mbuild
195 while read line
196 do
197    if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
198    then
199       HOSTNAME=`echo $line | cut -d" " -s -f2`
200       host_identifier=`echo $line | cut -d" " -s -f3`
201       if [[ $local_host_real_name = $HOSTNAME ]]
202       then
203          local_host=$host_identifier
204          break
205       fi
206    fi
207 done < $tmp_mbuild
208
209 if [[ "$local_host" = "" ]]
210 then
211    printf "\n  +++ no host identifier found in configuration file \"$config_file\""
212    printf "\n      for local host \"$local_host_real_name\"."
213    printf "\n      Please add line"
214    printf "\n      \"\%host_identifier $local_host_real_name <identifier>\""
215    printf "\n      to the configuration file."
216    locat=local_host; exit
217 fi
218
219
220
221 [[ $local_host_real_name = scirocco ]]  &&  scirocco=true
222 [[ $local_host_real_name = fimm.bccs.uib.no ]]  &&  fimm=true
223
224
225
226 if [[ $local_host != ibms ]]
227 then
228    config_file=$PWD/$config_file
229 else
230    config_file=`pwd`/$config_file
231 fi
232
233
234 
235    # BENUTZERNAMEN AUF LOKALEM RECHNER AUS KONFIGURATIONSDATEI ERMITTELN
236 line=""
237 grep  " $local_host" $config_file | grep "%remote_username"  >  $tmp_mbuild
238 while read line
239 do
240    if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
241    then
242       local_username=`echo $line | cut -d" " -s -f2`
243    fi
244 done < $tmp_mbuild
245
246
247 if [[ "$local_username" = "" ]]
248 then
249    printf "\n  +++ no user name found in configuration file"
250    printf "\n      for local host \"$local_host\" "
251    locat=config_file; exit
252 fi
253
254
255    # LOKALEN QUELLTEXTPFAD ERMITTELN.
256    # ZUERST PRUEFEN, OB EIN GLOBALER QUELLTEXTPFAD FUER ALLE RECHNER
257    # VEREINBART WURDE.
258    # DAZU ZUNAECHST ALLE IN DER KONFIGURATIONSDATEI VEREINBARTEN GLOBALEN
259    # VARIABLEN SETZEN, WEIL DIESE EVTL. IN PFADNAMEN VERWENDET WERDEN
260 line=""
261 grep "%" $config_file  >  $tmp_mbuild
262 while read line
263 do
264    if [[ "$line" != ""  &&  "$(echo $line | cut -d" " -s -f3)" = ""  &&  $(echo $line | cut -c1) != "#" ]]
265    then
266       var=`echo $line | cut -d" " -s -f1 | cut -c2-`
267       value=`echo $line | cut -d" " -s -f2`
268       eval export $var=\$value
269#       eval echo \"   $var=\$$var \"   # AUSGABE ZU TESTZWECKEN
270    fi
271 done < $tmp_mbuild
272
273    # NUN PRUEFEN, OB EIN GLOBALER QUELLTEXTPFAD VEREINBART WURDE
274 line=""
275 grep "%source_path" $config_file  >  $tmp_mbuild
276 while read line
277 do
278    if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
279    then
280       if [[ "$(echo $line | cut -d" " -s -f3)" = "" ]]
281       then
282          global_source_path=`echo $line | cut -d" " -s -f2`
283       fi
284    fi
285 done < $tmp_mbuild
286
287 line=""
288 grep  " $local_host" $config_file | grep "%source_path"  >  $tmp_mbuild
289 while read line
290 do
291    if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
292    then
293       local_source_path=`echo $line | cut -d" " -s -f2`
294    fi
295 done < $tmp_mbuild
296
297 if [[ "$local_source_path" = "" ]]
298 then
299    if [[ "$global_source_path" != "" ]]
300    then
301       local_source_path=$global_source_path
302    else
303       printf "\n  +++ no source path found in configuration file"
304       printf "\n      for local host \"$local_host\" "
305       printf "\n      please set \"\%source_path\" in configuration file"
306       locat=config_file; exit
307    fi
308 fi
309 eval local_source_path=$local_source_path
310 eval local_source_path=$local_source_path
311
312
313
314    # GLOBALEN DEPOSITORY-PFAD ERMITTELN
315 line=""
316 grep "%depository_path" $config_file  >  $tmp_mbuild
317 while read line
318 do
319    if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
320    then
321       if [[ "$(echo $line | cut -d" " -s -f3)" = "" ]]
322       then
323          global_depository_path=`echo $line | cut -d" " -s -f2`
324       fi
325    fi
326 done < $tmp_mbuild
327
328
329
330    # PRUEFEN, OB IN KONFIGURATIONSDATEI EIN HAUPTPROGRAMM
331    # VEREINBART WURDE
332 if [[ $(grep -c "%mainprog" $config_file) != 1 ]]
333 then
334    printf "\n  +++ no main program or more than one main program defined"
335    printf "\n      in configuration file"
336    locat=configuration; exit
337 else
338    line=`grep "%mainprog" $config_file`
339    if [[ "$line" = ""  ||  $(echo $line | cut -c1) = "#" ]]
340    then
341       printf "\n  +++ no main program defined in configuration file"
342       locat=configuration; exit
343    fi
344    mainprog=`echo $line | cut -d" " -s -f2 | cut -d"." -f1`
345 fi
346
347
348
349    # MAKEFILE vorhanden
350 [[ "$makefile" = "" ]]  &&  makefile=$local_source_path/Makefile
351 if [[ ! -f $makefile ]]
352 then
353    printf "\n  +++ makefile: "
354    printf "\n           $makefile"
355    printf "\n      does not exist"
356    locat=makefile; exit 
357 fi
358
359
360    # HEADER-AUSGABE (TEIL1: MELDUNGEN UEBER LOKALEN RECHNER)
361 calltime=$(date)
362 printf "\n"
363 printf "#------------------------------------------------------------------------# \n"
364 printf "| $version$calltime | \n"
365 printf "|                                                                        | \n"
366 column1="called on:"; column2=$local_host_real_name
367 printf "| $column1$column2 | \n"
368 column1="local username:"; column2=$local_username
369 printf "| $column1$column2 | \n"
370 column1="local IP-addres:"; column2=$local_addres
371 printf "| $column1$column2 | \n"
372 column1="config file:"; column2=$config_file
373 printf "| $column1$column2 | \n"
374 column1="makefile:"; column2=$makefile
375 printf "| $column1$column2 | \n"
376 column1="local source path:"; column2=$local_source_path
377 printf "| $column1$column2 | \n"
378 printf "#------------------------------------------------------------------------# \n"
379
380# printf "|                                                                        | \n"
381
382
383 if [[ $compile_utility_programs = false ]]
384 then
385
386       # IN JEDEM FALL ALLEN DATEIEN WRITE-PERMIT GEBEN, DAMIT ES AUF
387       # DEN REMOTE-RECHNERN NICHT EVTL. ZU PROBLEMEN BEIM UEBERSCHREIBEN KOMMT
388    cd  $local_source_path
389    printf "\n\n  *** tar of makefile and source files in $local_source_path" 
390    tar -cf  ${mainprog}_sources.tar  Makefile  *.$suf
391    printf "\n"
392
393 fi
394
395
396
397    # BESTAETIGUNG ZUM WEITERMACHEN EINHOLEN
398 if [[ $host = all ]]
399 then
400    printf "\n  *** updates will be made for ALL hosts found in"
401    printf "\n      the configuration file"
402 else
403    printf "\n  *** update will be made for host \"$host\" "
404 fi
405
406 if [[ $silent = false ]]
407 then
408    answer=dummy
409    printf "\n\n"
410    while [[ "$answer" != y  &&  "$answer" != Y  &&  "$answer" != n  &&  "$answer" != N ]]
411    do
412       printf " >>> continue (y/n) ?  "
413       read  answer
414    done
415    if [[ $answer = n  ||  $answer = N ]]
416    then
417       locat=user_abort; exit
418    fi
419 fi
420 
421 
422
423   
424    # GENERIERUNG DER AKTUELLEN MODELLVERSION FUER ALLE RECHNER-/UEBERSETZUNGS-
425    # VERSIONEN, DIE IN DER KONFIGURATIONSDATEI GEFUNDEN WERDEN
426 printf "\n  *** scanning configuration file for host(s) ..."
427
428 grep  %fopts  $config_file  >  $tmp_mbuild
429 while read line
430 do
431       # KOMMENTARZEILEN UEBERSPRINGEN
432    [[ $(echo $line | cut -c1) = "#" ]]  &&  continue
433    (( ihost = ihost + 1 ))
434    hostline[$ihost]="$line"
435 done < $tmp_mbuild
436
437 
438 while (( ih < ihost ))
439 do
440
441    (( ih = ih + 1 ))
442
443       # REMOTE-RECHNER UND UEBERSETZUNGS-VERSION FESTSTELLEN
444       # NUR WEITERMACHEN, WENN ENTSPRECHENDER REMOTE-RECHNER MITTELS
445       # SHELLSCRIPT-OPTION AUCH AUSGEWAEHLT WURDE
446    remote_host_string=`echo ${hostline[$ih]} | cut -d" " -s -f3-`
447    remote_host=`echo $remote_host_string | cut -d" " -f1`
448    if [[ $host != all ]]
449    then
450       [[ $remote_host != $host ]]  &&  continue
451    fi
452    host_found=true
453    condition1=`echo $remote_host_string | cut -d" " -s -f2`
454    if [[ $condition1 = $remote_host ]]
455    then
456       condition1=""
457    else
458       condition2=`echo $remote_host_string | cut -d" " -s -f3`
459    fi
460
461    netcdf_inc=""
462    netcdf_lib=""
463
464       # IP-ADRESSE DES REMOTE-RECHNERS BESTIMMEN
465    case  $remote_host  in
466        (lcmuk)          remote_addres=130.75.105.2;;
467        (lcsgib)         remote_addres=130.73.232.102;;
468        (lcsgih)         remote_addres=130.75.4.102;;
469        (lck)            remote_addres=165.132.26.61;;
470        (lctit)          remote_addres=172.17.75.161;;
471        (lcxt4)          remote_addres=129.177.20.113;;
472        (lcxt5m)         remote_addres=193.166.211.144;;
473        (decalpha)       remote_addres=165.132.26.56;;
474        (ibmh)           remote_addres=136.172.40.15;;
475        (ibms)           remote_addres=150.183.5.101;;
476        (ibmy)           remote_addres=165.132.26.58;;
477        (nech)           remote_addres=136.172.44.192;;
478        (neck)           remote_addres=133.5.178.11;;
479        (ground.yonsei.ac.kr) remote_addres=134.75.155.33;;
480        (*)              if [[ $local_host != $remote_host ]]
481                         then
482                            printf "\n  +++ remote host \"$remote_host\" unknown";
483                            printf "\n      please inform S. Raasch!"
484                         fi;;
485    esac
486
487
488       # REMOTE-USERNAMEN ERMITTELN
489    line=""
490    found=false
491    grep  "$remote_host_string" $config_file | grep "%remote_username"  >  $tmp_mbuild
492    while read line1
493    do
494
495       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
496       then
497          line="$line1"
498       fi
499
500       if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
501       then
502          remote_username=`echo $line | cut -d" " -s -f2`
503          found=true
504       fi
505
506    done < $tmp_mbuild
507
508    if [[ $found = false ]]
509    then
510       printf "\n  +++ no remote username found in configuration file"
511       printf "\n      for \"$remote_host_string\" "
512       locat=config_file; exit
513    fi
514
515
516       # REMOTE-QUELLTEXTPFAD ERMITTELN
517    line=""
518    remote_source_path=""
519    grep  "$remote_host_string" $config_file | grep "%source_path"  >  $tmp_mbuild
520    while read line1
521    do
522
523       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
524       then
525          line="$line1"
526       fi
527
528       if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
529       then
530          remote_source_path=`echo $line | cut -d" " -s -f2`
531       fi
532
533    done < $tmp_mbuild
534
535    if [[ "$remote_source_path" = "" ]]
536    then
537       if [[ "$global_source_path" != "" ]]
538       then
539          remote_source_path=$global_source_path
540       else
541          printf "\n  +++ no source path found in configuration file"
542          printf "\n      for \"$remote_host_string\" "
543          locat=config_file; exit
544       fi
545    fi
546
547    remote_ud=${remote_source_path}/../UTIL
548    remote_ud=$(eval echo $remote_ud)
549
550
551       # REMOTE-PFAD FUER MAKE-DEPOSITORY ERMITTELN
552    remote_md=""
553    line=""
554    grep  "$remote_host_string" $config_file | grep "%depository_path"  >  $tmp_mbuild
555    while read line1
556    do
557
558       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
559       then
560          line="$line1"
561       fi
562
563       if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
564       then
565          remote_md=`echo $line | cut -d" " -s -f2`
566       fi
567
568    done < $tmp_mbuild
569
570    if [[ "$remote_md" = "" ]]
571    then
572       if [[ "$global_depository_path" != "" ]]
573       then
574          remote_md=$global_depository_path
575       else
576          printf "\n  +++ no depository path found in configuration file"
577          printf "\n      for \"$remote_host_string\" "
578          printf "\n      please set \"\%depository_path\" in configuration file"
579          locat=config_file; exit
580       fi
581    fi
582
583    remote_md=$(eval echo $remote_md)
584    [[ "$condition1" != "" ]]  &&  remote_md=${remote_md}_$condition1
585    [[ "$condition2" != "" ]]  &&  remote_md=${remote_md}_$condition2
586
587
588       # COMPILERNAMEN ERMITTELN
589    line=""
590    found=false
591    grep  "$remote_host_string" $config_file | grep "%compiler_name "  >  $tmp_mbuild
592    while read line1
593    do
594
595       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
596       then
597          line="$line1"
598       fi
599
600       if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
601       then
602          compiler_name=`echo $line | cut -d" " -s -f2`
603          found=true
604       fi
605
606    done < $tmp_mbuild
607
608    if [[ $found = false ]]
609    then
610       printf "\n  +++ no compiler name found in configuration file"
611       printf "\n      for \"$remote_host_string\" "
612       locat=config_file; exit
613    fi
614
615
616       # BEI BENUTZUNG EINES PARALLELEN COMPILERS MUSS AUCH EIN
617       # SERIELLER COMPILERNAME ERMITTELT WERDEN
618    if [[ $(echo $remote_host_string | grep -c parallel) = 1 ]]
619    then
620       line=""
621       found=false
622       grep  "$remote_host_string" $config_file | grep "%compiler_name_ser"  >  $tmp_mbuild
623       while read line1
624       do
625
626          if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
627          then
628             line="$line1"
629          fi
630
631          if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
632          then
633             compiler_name_ser=`echo $line | cut -d" " -s -f2`
634             found=true
635          fi
636
637       done < $tmp_mbuild
638
639       if [[ $found = false ]]
640       then
641          printf "\n  +++ no serial compiler name found in configuration file"
642          printf "\n      for \"$remote_host_string\" "
643          locat=config_file; exit
644       fi
645    else
646       compiler_name_ser=$compiler_name
647    fi
648
649
650
651       # PRAEPROZESSOR-OPTIONEN/DIREKTIVEN ERMITTELN
652    line=""
653    found=false
654    grep  "$remote_host_string" $config_file | grep "%cpp_options"  >  $tmp_mbuild
655    while read line1
656    do
657
658       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
659       then
660          line="$line1"
661       fi
662
663       if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
664       then
665             # EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
666          cpp_options=`echo $line | cut -d" " -s -f2 | sed 's/::/%DUM%/g' | sed 's/:/ /g' | sed 's/%DUM%/:/g'`
667          found=true
668       fi
669
670    done < $tmp_mbuild
671
672    if [[ $found = false ]]
673    then
674       printf "\n  +++ no preprocessor options found in configuration file"
675       printf "\n      for \"$remote_host_string\" "
676       locat=config_file; exit
677    fi
678
679
680       # RECHNERSPEZIFISCHE CPP-DIREKTIVEN HINZUFUEGEN
681    for  string  in  $remote_host_string
682    do
683       if [[ $(echo $remote_host | cut -c1-2) = lc  &&  $(echo $string | cut -c1-2) = lc ]]
684       then
685          cpp_options="$cpp_options -D__lc "
686       elif [[ $(echo $remote_host | cut -c1-3) = ibm  &&  $(echo $string | cut -c1-3) = ibm ]]
687       then
688          cpp_options="${cpp_options},-D__ibm"
689       elif [[ $(echo $remote_host | cut -c1-3) = nec  &&  $(echo $string | cut -c1-3) = nec ]]
690       then
691          cpp_options="${cpp_options} -D__nec"
692       else
693          if [[ $(echo $remote_host | cut -c1-3) = ibm ]]
694          then
695             cpp_options="${cpp_options},-D__$string"
696          else
697             cpp_options="$cpp_options -D__$string "
698          fi
699       fi
700    done
701
702
703
704       # NETCDF-OPTIONEN ERMITTELN
705    line=""
706    grep  "$remote_host_string" $config_file | grep "%netcdf_inc"  >  $tmp_mbuild
707    while read line1
708    do
709
710       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
711       then
712          line="$line1"
713       fi
714
715       if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
716       then
717             # EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
718          netcdf_inc=`echo $line | cut -d" " -s -f2 | sed 's/::/%DUM%/g' | sed 's/:/ /g' | sed 's/%DUM%/:/g'`
719       fi
720
721    done < $tmp_mbuild
722
723    line=""
724    grep  "$remote_host_string" $config_file | grep "%netcdf_lib"  >  $tmp_mbuild
725    while read line1
726    do
727
728       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
729       then
730          line="$line1"
731       fi
732
733       if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
734       then
735             # EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
736          netcdf_lib=`echo $line | cut -d" " -s -f2 | sed 's/::/%DUM%/g' | sed 's/:/ /g' | sed 's/%DUM%/:/g'`
737       fi
738
739    done < $tmp_mbuild
740
741
742
743       # get make options
744    line=""
745    found=false
746    grep  "$remote_host_string" $config_file | grep "%mopts"  >  $tmp_mbuild
747    while read line1
748    do
749
750       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
751       then
752          line="$line1"
753       fi
754
755       if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
756       then
757             # remove colons from directive string
758          make_options=`echo $line | cut -d" " -s -f2 | sed 's/::/%DUM%/g' | sed 's/:/ /g' | sed 's/%DUM%/:/g'`
759
760       fi
761
762    done < $tmp_mbuild
763
764
765
766       # COMPILEROPTIONEN ERMITTELN
767    line=""
768    found=false
769    grep  "$remote_host_string" $config_file | grep "%fopts"  >  $tmp_mbuild
770    while read line1
771    do
772
773       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
774       then
775          line="$line1"
776       fi
777
778       if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
779       then
780             # EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
781          compiler_options=`echo $line | cut -d" " -s -f2 | sed 's/::/%DUM%/g' | sed 's/:/ /g' | sed 's/%DUM%/:/g'`
782          found=true
783
784             # NETCDF-INCLUDEVERZEICHNIS HINZUFUEGEN
785          compiler_options="$compiler_options $netcdf_inc"
786       fi
787
788    done < $tmp_mbuild
789
790    if [[ $found = false ]]
791    then
792       printf "\n  +++ no compiler options found in configuration file"
793       printf "\n      for \"$remote_host_string\" "
794       locat=config_file; exit
795    fi
796
797
798
799       # MPI LIBRARY ERMITTELN
800    line=""
801    found=false
802    grep  "$remote_host_string" $config_file | grep "%mpilib"  >  $tmp_mbuild
803    while read line1
804    do
805
806       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
807       then
808          line="$line1"
809       fi
810
811       if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
812       then
813             # EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
814          mpilib=`echo $line | cut -d" " -s -f2`
815          found=true
816       fi
817
818    done < $tmp_mbuild
819
820    [[ $found = false ]]  &&  mpilib=mpt
821
822
823
824
825       # LADER-OPTIONEN ERMITTELN
826    line=""
827    found=false
828    grep  "$remote_host_string" $config_file | grep "%lopts"  >  $tmp_mbuild
829    while read line1
830    do
831
832       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
833       then
834          line="$line1"
835       fi
836
837       if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
838       then
839             # EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
840          loader_options=`echo $line | cut -d" " -s -f2 | sed 's/::/%DUM%/g' | sed 's/:/ /g' | sed 's/%DUM%/:/g'`
841          found=true
842
843             # NETCDF-LIBRARY HINZUFUEGEN
844          loader_options="$loader_options $netcdf_lib"
845       fi
846
847    done < $tmp_mbuild
848
849    if [[ $found = false ]]
850    then
851       printf "\n  +++ no loader options found in configuration file"
852       printf "\n      for \"$remote_host_string\" "
853       locat=config_file; exit
854    fi
855
856
857    printf "\n\n#------------------------------------------------------------------------# \n"
858    if [[ $remote_host = $local_host ]]
859    then
860       column1="remote_host:"; column2="$remote_host (= local host!)"
861    else
862       column1="remote_host:"; column2=$remote_host
863    fi
864    printf "| $column1$column2 | \n"
865    printf "|                                                                        | \n"
866    column1="conditions:"; column2="$condition1 $condition2"
867    printf "| $column1$column2 | \n"
868    column1="make depository:"; column2=$remote_md
869    printf "| $column1$column2 | \n"
870    line=$(echo "$remote_md" | cut -c51-)
871    while [[ "$line" != "" ]]
872    do
873       column1=""
874       column2=$line
875       printf "| $column1$column2 | \n"
876       line=$(echo "$line" | cut -c51-)
877    done
878    if [[ $compile_utility_programs = true ]]
879    then
880       column1="utility directory:"; column2=$remote_ud
881       printf "| $column1$column2 | \n"
882    fi
883    column1="username:"; column2=$remote_username
884    printf "| $column1$column2 | \n"
885    column1="addres:"; column2=$remote_addres
886    printf "| $column1$column2 | \n"
887    column1="compiler:"; column2=$compiler_name
888    printf "| $column1$column2 | \n"
889    if [[ $compile_utility_programs = true ]]
890    then
891       column1="serial compiler:"; column2=$compiler_name_ser
892       printf "| $column1$column2 | \n"
893    fi
894    if [[ "$make_options" != "" ]]
895    then
896       column1="make options:"; column2=$make_options
897       printf "| $column1$column2 | \n"
898    fi
899    column1="cpp options:"; column2=$cpp_options
900    printf "| $column1$column2 | \n"
901    line=$(echo "$cpp_options" | cut -c51-)
902    while [[ "$line" != "" ]]
903    do
904       column1=""
905       column2=$line
906       printf "| $column1$column2 | \n"
907       line=$(echo "$line" | cut -c51-)
908    done
909    column1="compiler options:"; column2=$compiler_options
910    printf "| $column1$column2 | \n"
911    line=$(echo "$compiler_options" | cut -c51-)
912    while [[ "$line" != "" ]]
913    do
914       column1=""
915       column2=$line
916       printf "| $column1$column2 | \n"
917       line=$(echo "$line" | cut -c51-)
918    done
919    if [[ $( echo $remote_host | cut -c1-5 ) = lcsgi ]]
920    then
921       column1="mpi library:"; column2=$mpilib
922       printf "| $column1$column2 | \n"
923    fi
924    column1="loader options:"; column2=$loader_options
925    printf "| $column1$column2 | \n"
926    line=$(echo "$loader_options" | cut -c51-)
927    while [[ "$line" != "" ]]
928    do
929       column1=""
930       column2=$line
931       printf "| $column1$column2 | \n"
932       line=$(echo "$line" | cut -c51-)
933    done
934    printf "#------------------------------------------------------------------------# \n"
935
936    if [[ $silent = false ]]
937    then
938       answer=dummy
939       printf "\n\n"
940       while [[ "$answer" != y  &&  "$answer" != Y  && "$answer" != c  &&  "$answer" != C  && "$answer" != s  &&  "$answer" != S  &&  "$answer" != a  &&  "$answer" != A ]]
941       do
942          printf " >>> continue (y(es)/c(ontinue)/a(bort)/s(skip)) ?  "
943          read  answer
944       done
945       if [[ $answer = a  ||  $answer = A ]]
946       then
947          locat=user_abort; exit
948       fi
949       if [[ $answer = c  ||  $answer = C ]]
950       then
951          silent=false
952       fi
953       if [[ $answer = s  ||  $answer = S ]]
954       then
955          continue
956       fi
957    fi
958
959
960       # make on remote host
961    if [[ $remote_host != $local_host ]]
962    then
963
964       if [[ $compile_utility_programs = false ]]
965       then
966
967             # AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
968             # FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
969          echo "  *** copying \"${mainprog}_sources.tar\" to \"${remote_addres}:${remote_md}/\" "
970          if [[ $remote_host != lctit ]]
971          then
972             ssh  ${remote_username}@${remote_addres} "[[ ! -d ${remote_md} ]]  &&  (echo \"  *** ${remote_md} will be created\"; mkdir -p  ${remote_md})"
973          else
974                # TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
975                # MIT SSH, DESHALB AUFRUF PER PIPE
976             print "[[ ! -d ${remote_md} ]]  &&  (echo \"  *** ${remote_md} will be created\"; mkdir -p  ${remote_md})"  |  ssh ${remote_username}@${remote_addres}  2>&1
977          fi
978          if [[ $local_host = decalpha ]]
979          then
980                # DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
981                # IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
982                # KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
983             remote_md=`echo $remote_md | sed 's/\$HOME\///'`
984             /bin/scp  ${local_source_path}/${mainprog}_sources.tar  ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
985          else
986             scp  ${local_source_path}/${mainprog}_sources.tar  ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
987          fi
988
989
990
991             # FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
992          echo "  *** untar previous update on remote host, if existing"
993          if [[ $remote_host != lctit ]]
994          then
995             ssh  ${remote_username}@${remote_addres}  "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]]  &&  tar -xf  ${mainprog}_current_version.tar"
996          else
997                # TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
998                # MIT SSH, DESHALB AUFRUF PER PIPE
999             print  "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]]  &&  tar -xf  ${mainprog}_current_version.tar"  |  ssh  ${remote_username}@${remote_addres}  2>&1
1000          fi
1001
1002
1003             # AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
1004          echo "  *** untar actual sources on remote host"
1005          if [[ $remote_host != lctit ]]
1006          then
1007             ssh  ${remote_username}@${remote_addres}  "cd ${remote_md}; tar -xf  ${mainprog}_sources.tar"
1008          else
1009                # TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1010                # MIT SSH, DESHALB AUFRUF PER PIPE
1011             print  "cd ${remote_md}; tar -xf  ${mainprog}_sources.tar"  |  ssh  ${remote_username}@${remote_addres}  2>&1
1012          fi
1013
1014
1015             # MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1016             # KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
1017             # BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
1018             # Z.B. DIE PFADE ZUM COMPILER)
1019          echo "  *** execute \"make\" on remote host"
1020
1021          if [[ $remote_host = nech ]]
1022          then
1023             make_call_string="sxmake  $make_options  PROG=$mainprog  F90=$compiler_name  COPT=\"$cpp_options\"  F90FLAGS=\"$compiler_options\"  LDFLAGS=\"$loader_options\" "
1024          else
1025             make_call_string="make  $make_options  PROG=$mainprog  F90=$compiler_name  COPT=\"$cpp_options\"  F90FLAGS=\"$compiler_options\"  LDFLAGS=\"$loader_options\" "
1026          fi
1027
1028          if [[ $remote_host = ibms  ||  $remote_host = ibmy ]]
1029          then
1030
1031             ssh  ${remote_username}@${remote_addres}  "cd ${remote_md}; echo '$make_call_string' > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 | tee ${remote_host}_last_make_protokoll
1032
1033          elif [[ $remote_host = ibmh ]]
1034          then
1035
1036             print "export OBJECT_MODE=64; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" | ssh  ${remote_username}@${remote_addres} 2>&1 | tee ${remote_host}_last_make_protokoll
1037
1038          elif [[ $remote_host = lcsgib  ||  $remote_host = lcsgih ]]
1039          then
1040
1041             print ". /usr/share/modules/init/bash; module load ifort/11.0.069; module load $mpilib; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" | ssh  ${remote_username}@${remote_addres} 2>&1 | tee ${remote_host}_last_make_protokoll
1042#             print ". /usr/share/modules/init/bash; module load mvapich2/1.2rc1-intel; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" | ssh  ${remote_username}@${remote_addres} 2>&1 | tee ${remote_host}_last_make_protokoll
1043#             print ". /usr/share/modules/init/bash; module load mvapich2; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" | ssh  ${remote_username}@${remote_addres} 2>&1 | tee ${remote_host}_last_make_protokoll
1044
1045          elif [[ $remote_host = lctit ]]
1046          then
1047
1048             echo  " "  >  ${remote_host}_last_make_protokoll
1049             while [[ $(cat ${remote_host}_last_make_protokoll | grep -c "Forwarding to N1GE") = 0 ]]
1050             do
1051                print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" | ssh  ${remote_username}@${remote_addres} 2>&1 | tee ${remote_host}_last_make_protokoll
1052             done
1053
1054          elif [[ $remote_host = lcxt4 ]]
1055          then
1056
1057             print ". /opt/modules/default/init/ksh; module load Base-opts/2.1.56HDA; module load modules/3.1.6; module load pgi/9.0.4; module load PrgEnv-pgi/2.1.56HDA; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" | ssh  ${remote_username}@${remote_addres} 2>&1 | tee ${remote_host}_last_make_protokoll
1058
1059          else
1060
1061             print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" | ssh  ${remote_username}@${remote_addres} 2>&1 | tee ${remote_host}_last_make_protokoll
1062
1063          fi
1064
1065          if [[ $(grep -c MAKE_ERROR ${remote_host}_last_make_protokoll) != 0 ]]
1066          then
1067             printf "\a\n  +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1068             if [[ $silent = false ]]
1069             then
1070                answer=dummy
1071                printf "\n"
1072                while [[ "$answer" != c  &&  "$answer" != k ]]
1073                do
1074                   printf "  >>> continue / list errors / kill mbuild (c/l/k) ? "
1075                   read  answer
1076                   if [[ "$answer" = l ]]
1077                   then
1078                      more ${remote_host}_last_make_protokoll
1079                   fi
1080                done
1081                if [[ $answer = k ]]
1082                then
1083                   locat=user_abort; exit
1084                fi
1085             fi
1086          fi
1087
1088
1089
1090             # NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
1091          printf "\n  *** tar update on remote host ..."
1092          if [[ $remote_host != lctit ]]
1093          then
1094             ssh  ${remote_username}@${remote_addres}  "cd ${remote_md}; chmod u+w *; tar -cf  ${mainprog}_current_version.tar  ${mainprog}  *.f90 *.o *.mod"
1095          else
1096                # TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1097                # MIT SSH, DESHALB AUFRUF PER PIPE
1098             print  "cd ${remote_md}; chmod u+w *; tar -cf  ${mainprog}_current_version.tar  ${mainprog}  *.f90 *.o *.mod"  |  ssh  ${remote_username}@${remote_addres}  2>&1
1099          fi
1100
1101
1102             # AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
1103#          printf "\n  *** \"make clean\" on remote host ..."
1104#          ssh  ${remote_username}@${remote_addres}  "cd ${remote_md}; make clean; rm ${mainprog}_sources.tar; rm *.f90 Makefile"
1105#          printf "\n"
1106
1107
1108
1109
1110          # GLEICHE AKTIONEN FUER DIE UTILITY-PROGRAMME DURCHFUEHREN
1111          # AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1112          # FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
1113       elif [[ $compile_utility_programs = true ]]
1114       then
1115
1116          printf "\n\n"
1117          echo "  *** copying scripts and utility programs to \"${remote_addres}:${remote_ud}/\" "
1118          cd  ${local_source_path}/../SCRIPTS
1119
1120          if [[ $remote_host != lctit ]]
1121          then
1122             ssh  ${remote_username}@${remote_addres} "[[ ! -d ${remote_ud} ]]  &&  (echo \"  *** ${remote_ud} will be created\"; mkdir -p  ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]]  &&  (echo \"  *** ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)"
1123          else
1124                # TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1125                # MIT SSH, DESHALB AUFRUF PER PIPE
1126             print "[[ ! -d ${remote_ud} ]]  &&  (echo \"  *** ${remote_ud} will be created\"; mkdir -p  ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]]  &&  (echo \"  *** ${remote_ud}/../SCRIPTS will be created\"; mkdir -p  ${remote_ud}/../SCRIPTS)"  |  ssh ${remote_username}@${remote_addres}  2>&1
1127          fi
1128
1129             # KOPIEREN DER SCRIPTE
1130          if [[ $local_host = decalpha ]]
1131          then
1132                # DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
1133                # IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1134                # KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1135             remote_ud=`echo $remote_ud | sed 's/\$HOME\///'`
1136             /bin/scp  batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob  ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS  >  /dev/null
1137          else
1138             scp  batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob  ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS  >  /dev/null
1139          fi
1140
1141          cd  -  > /dev/null
1142          cd  ${local_source_path}/../UTIL
1143
1144
1145             # KOPIEREN DER UTILITY-PROGRAMME
1146          if [[ $local_host = decalpha ]]
1147          then
1148                # DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
1149                # IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1150                # KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1151             remote_ud=`echo $remote_ud | sed 's/\$HOME\///'`
1152             /bin/scp  Makefile  *.f90  ${remote_username}@${remote_addres}:${remote_ud}  >  /dev/null
1153          else
1154             scp  Makefile  *.f90  ${remote_username}@${remote_addres}:${remote_ud}  >  /dev/null
1155          fi
1156
1157
1158
1159             # MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1160             # KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
1161             # BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
1162             # Z.B. DIE PFADE ZUM COMPILER)
1163          echo "  *** execute \"make\" on remote host"
1164
1165          if [[ $remote_host = nech ]]
1166          then
1167             make_call_string="sxmake  F90=$compiler_name  F90_SER=$compiler_name_ser  COPT=\"$cpp_options\"  F90FLAGS=\"$compiler_options\"  LDFLAGS=\"$loader_options\" "
1168          else
1169             make_call_string="make  F90=$compiler_name  F90_SER=$compiler_name_ser  COPT=\"$cpp_options\"  F90FLAGS=\"$compiler_options\"  LDFLAGS=\"$loader_options\" "
1170          fi
1171
1172          if [[ $remote_host = ibms  ||  $remote_host = ibmy ]]
1173          then
1174
1175             ssh  ${remote_username}@${remote_addres}  "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR"
1176
1177          elif [[ $remote_host = ibmh ]]
1178          then
1179
1180             print "export OBJECT_MODE=64; cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" | ssh  ${remote_username}@${remote_addres}
1181
1182          elif [[ $remote_host = lctit ]]
1183          then
1184
1185             echo  " "  >  ${remote_host}_last_make_protokoll
1186             while [[ $(cat ${remote_host}_last_make_protokoll | grep -c "Forwarding to N1GE") = 0 ]]
1187             do
1188                print "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" | ssh  ${remote_username}@${remote_addres} 2>&1 | tee ${remote_host}_last_make_protokoll
1189             done
1190
1191          elif [[ $remote_host = lcxt4 ]]
1192          then
1193
1194             print ". /opt/modules/default/init/ksh; module load Base-opts/2.1.56HDA; module load modules/3.1.6; module load pgi/9.0.4; module load PrgEnv-pgi/2.1.56HDA; cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" | ssh  ${remote_username}@${remote_addres} 2>&1 | tee ${remote_host}_last_make_protokoll
1195
1196          else
1197
1198             print "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" | ssh  ${remote_username}@${remote_addres} 2>&1 | tee ${remote_host}_last_make_protokoll
1199
1200          fi
1201
1202       fi    # ENDE UEBERSETZUNG DER UTILITY-PROGRAMME
1203
1204       rm -rf  ${remote_host}_last_make_protokoll
1205
1206       # make on local host
1207    else
1208
1209       if [[ $compile_utility_programs = false ]]
1210       then
1211
1212             # DEPOSITORY VERZEICHNIS ERZEUGEN, FALLS NOCH NICHT VORHANDEN
1213          eval remote_md=$remote_md
1214          if [[ ! -d $remote_md ]]
1215          then
1216             if  mkdir $remote_md
1217             then
1218                printf "\n\n  *** directory for make depository:"
1219                printf "\n           $remote_md"
1220                printf "\n      was created\n"
1221             else
1222                printf "\n  +++ directory for make depository:"
1223                printf "\n           $remote_md"
1224                printf "\n      cannot be created"
1225                locat=local_depository_path; exit
1226             fi
1227          fi
1228
1229             # QUELLTEXT-DATEIEN AUS REPOSITORY INS DEPOSITORY KOPIEREN
1230          echo " "
1231          echo "  *** updating sources in $remote_md"
1232          cd  $remote_md
1233          cp  $local_source_path/${mainprog}_sources.tar  .
1234          tar xf  ${mainprog}_sources.tar
1235
1236             # MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF LOKALEM RECHNER AUSFUEHREN
1237          echo " "
1238          echo "  *** execute \"make\" on local host"
1239
1240          make  $make_options  PROG=$mainprog  F90=$compiler_name  COPT="$cpp_options"  F90FLAGS="$compiler_options"  LDFLAGS="$loader_options"  2>&1 | tee ${remote_host}_last_make_protokoll
1241
1242          if [[ $? != 0 ]]
1243          then
1244             printf "\a\n  +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1245             if [[ $silent = false ]]
1246             then
1247                answer=dummy
1248                printf "\n"
1249                while [[ "$answer" != c  &&  "$answer" != k ]]
1250                do
1251                   printf "  >>> continue / list errors / kill mbuild (c/l/k) ? "
1252                   read  answer
1253                   if [[ "$answer" = l ]]
1254                   then
1255                      more ${remote_host}_last_make_protokoll
1256                   fi
1257                done
1258                if [[ $answer = k ]]
1259                then
1260                   locat=user_abort; exit
1261                fi
1262             fi
1263          fi
1264
1265
1266             # NEUE VERSION AUF LOKALEM RECHNER ZUSAMMENPACKEN
1267          printf "\n  *** tar update on local host ..."
1268          tar -cf  ${mainprog}_current_version.tar  *.$suf *.o *.mod
1269
1270
1271          # COMPILE THE UTILITY PROGRAMS
1272       elif [[ $compile_utility_programs = true ]]
1273       then
1274          printf "\n\n"
1275          echo "  *** compiling the utility programs ..."
1276          cd ${local_source_path}/../UTIL
1277          make  F90=$compiler_name  F90_SER=$compiler_name_ser  COPT="$cpp_options"  F90FLAGS="$compiler_options"  LDFLAGS="$loader_options"
1278          cd  -  > /dev/null
1279       fi
1280
1281    fi
1282
1283 done
1284
1285
1286 if [[ $host_found = false ]]
1287 then
1288    if [[ $host = all ]]
1289    then
1290       printf "\n  +++ no hosts found in configuration file"
1291    else
1292       printf "\n  +++ host \"$host\" not found in configuration file"
1293    fi
1294    locat=config_file; exit
1295 fi
1296
1297
1298
1299    # ABSCHLIESSENDE ARBEITEN
1300 rm -f  hosts_found_in_config_file
1301
Note: See TracBrowser for help on using the repository browser.