source: palm/tags/release-3.6/SCRIPTS/mbuild @ 2238

Last change on this file since 2238 was 224, checked in by letzel, 15 years ago
  • mbuild: re-enable compilation more than once on lcmuk (as on other machines)
  • Property svn:keywords set to Id Rev
File size: 48.1 KB
Line 
1#!/bin/ksh
2# mbuild - Programmuebersetzungsscript
3# $Id: mbuild 224 2009-01-13 17:58:15Z suehring $
4
5     # Prozedur zur Uebersetzung von Programmteilen mittels make-Mechanismus
6     # auf einem Remote-Rechner, ausgehend von Quellcode auf einem lokalen
7     # Rechner
8
9     # Folgende Probleme existieren unter Linux, wenn keine AT&T-Korn-Shell
10     # verwendet wird:
11     # Wertzuweisungen an Variablen innerhalb von DO-Schleifen werden nicht
12     # nach aussen weitergegeben. "while read line" funktioniert nicht
13     # innerhalb einer Pipe.
14
15     # letzte Aenderung:
16     # 06/05/02 - Siggi - Beginn der Entwicklung
17     # 12/06/02 - Siggi - Abschluss der Entwicklungsarbeiten
18     # 23/06/02 - Siggi - voerst kein make-clean, Abbruch bei batch-mode
19     # 24/07/02 - Siggi - Keine Verwendung der temporaeren Datei tmp_mbuild
20     #                    unter linux mehr noetig, da nun AT&T-Korn-Shell
21     #                    benutzt wird
22     # 12/09/02 - Siggi - ibmh (hanni.hlrn.de) validiert
23     # 19/12/02 - Siggi - ibmb validiert
24     # 05/02/03 - Siggi - hostname nobela included
25     # 04/03/03 - Siggi - host nech included
26     # 06/03/03 - Siggi - make_call_string is echoed without '' to
27     #                    file LAST_MAKE_CALL (otherwise error on NEC, because
28     #                    '' are part of compiler options
29     # 16/03/03 - Siggi - Two underscores are placed in front of every define
30     #                    string, in case that palm.f90 version contains
31     #                    such strings
32     # 16/04/03 - Siggi - First extensions for linux machines
33     # 24/06/03 - Siggi - host orkan included
34     # 17/07/03 - Siggi - IP adress set to new "cross" machine at DKRZ
35     # 24/07/03 - Siggi - host maestro admitted
36     # 06/08/03 - Siggi - host gregale admitted
37     # 05/11/03 - Siggi - hosts irifi and quanero are now belonging to lcmuk
38     # 19/11/03 - Heiko - on lcmuk, mbuild does not tar the *.i files
39     # 08/01/04 - Siggi - additional preprocessor directive for ibm included
40     #                    (-D$OMP=OMP) in order to avoid problems with
41     #                    OMP_NUM_THREADS
42     # 09/01/04 - Siggi - action above cancelled
43     # 28/01/04 - Siggi - action above re-cancelled
44     # 08/03/04 - Siggi - host scirocco admitted
45     # 26/03/04 - Siggi - .o and .mod files are also deleted in depository, if
46     #                    the respective .f90 file is not listed in the makefile
47     #                    and deletion is demanded by the user
48     # 12/04/04 - Siggi - scp2 instead of scp used for transfer from decalpha
49     #                    due to error in ssh installation (otherwise a prompt
50     #                    for the password appears)
51     # 23/07/04 - Siggi - changes due to the new berni configuration
52     #                    (federation switch)
53     # 08/09/04 - Siggi - hanni IP address changed to 130.75.4.10
54     # 23/09/04 - Joerg - correction of IP-Address for 'cross' (DKRZ)
55     # 09/03/05 - Siggi - on nech, mbuild does not tar the *.i files
56     # 31/03/05 - Siggi - mbuild does not tar *.i files any more
57     # 24/04/05 - Siggi - netcdf support on lcmuk
58     # 25/04/05 - Siggi - netcdf support on gfdl3 (decalpha)
59     # 12/05/05 - Siggi - netcdf support on ibm
60     #                    set OBJECT_MODE=64 for compiling on ibmb, ibmh
61     # 18/05/05 - Siggi - netcdf support on nec
62     # 19/05/05 - Siggi - IP addres 134.75.155.74 changed to 165.132.26.56
63     # 23/05/05 - Siggi - netcdf support on ibms
64     # 01/06/05 - Siggi - reset of cpp_options to "" on lcmuk
65     # 30/06/05 - Siggi - netcdf support on bora
66     # 20/10/05 - Siggi - update of netcdf-version on decalpha (gfdl3)
67     # 04/11/05 - Siggi - netcdf 3.6.0-p1 on ibmh/ibmb
68     # 30/12/05 - Siggi - change of IP adresses in subnet 130.75.105
69     #                    host gfdl5 (ibmy) admitted
70     # 10/01/06 - Siggi - cpp directive for NetCDF 64bit support
71     # 20/01/06 - Siggi - cpp directive for ibmy
72     # 09/02/06 - Marcus- compile only once on lcmuk (as on ibmh/ibmb)
73     # 10/02/06 - Siggi - modifications for scp on decalpha
74     # 13/04/06 - Siggi - ostria admitted
75     # 19/04/06 - Siggi - preprocessor directive -D$OMP=OMP for ibm removed
76     # 23/05/05 - Siggi - lctit (SUN Fire X4600) admitted
77     # 29/05/05 - Siggi - atmos (lcide) admitted
78     # 23/08/06 - Siggi - netcdf support for scirocco (notebook)
79     # 24/11/06 - Siggi - breva and levanto admitted
80     # 07/02/07 - Siggi - adapted for RIAM (neck)
81     # 10/02/07 - Siggi - all hpmuk-related code removed
82     # 02/03/07 - Siggi - compilation of utility programs and transfer of
83     #                    scripts to remote hosts added (option -u)
84     # 14/03/07 - Siggi - fimm admitted, revision number added to terminal
85     #                    output
86     # 16/03/07 - Siggi - adjustments (netcdf) for lctit
87     #                    adjustments for running under pdksh, local ip-addres
88     #                    is not determined any more
89     # 30/03/07 - Siggi - cpp-directives/options + netcdf-options are read
90     #                    from configuration file
91     #                    host identifier (local_host) is read from config file
92     # 10/10/07 - Siggi - bugfix: handling of comment lines
93     # 18/07/08 - Siggi - adapted for lcsgih
94     # 21/07/08 - Siggi - mainprog (executable) is added to the tar-file
95     #                    ({mainprog}_current_version)
96     # 02/10/08 - Siggi - adapted for lcxt4
97     # 14/11/08 - Siggi - update mechanism completely revised: source tarfile
98     #                    remains in source directory, one depository per block
99     #                    (given in the config-file) is created, always all files
100     #                    from the source directory are copied to the respective
101     #                    depository, no additional file checks are done any more
102     #                    (version 2.1)
103     # 13/01/09 - Marcus- re-enable compilation more than once on lcmuk (as on
104     #                    other machines)
105
106
107
108    # VARIABLENVEREINBARUNGEN + DEFAULTWERTE
109 compile_utility_programs=false
110 config_file=.mrun.config
111 fimm=false
112 host=all
113 host_found=false
114 locat=normal
115 makefile=""
116 remote_mode=interactive
117 scirocco=false
118 silent=false
119 suf=f90
120 update=false
121 working_directory=`pwd`
122
123 typeset -i  ih ihost=0
124
125 typeset  -R30 calltime
126 typeset  -L20 column1
127 typeset  -L50 column2
128 typeset  -L70 column3
129 typeset  -L40 version="MBUILD  2.1  Rev$Rev: 224 $"
130
131    # FEHLERBEHANDLUNG
132    # BEI EXIT:
133 trap 'rm -rf  $working_directory/tmp_mbuild
134       if [[ $locat != normal ]]
135       then
136          printf "\n\n +++ mbuild killed \n\n"
137       else
138          printf "\n\n *** mbuild finished \n\n"
139       fi' exit
140
141
142    # BEI TERMINAL-BREAK:
143 trap 'rm -rf  $working_directory/tmp_mbuild
144       printf "\n\n +++ mbuild killed by \"^C\" \n\n"
145       exit
146      ' 2
147
148
149 tmp_mbuild=${working_directory}/tmp_mbuild
150
151    # SHELLSCRIPT-OPTIONEN EINLESEN
152 while  getopts  :c:h:m:rs:u  option
153 do
154   case  $option  in
155       (c)   config_file=$OPTARG;;
156       (h)   host=$OPTARG;;
157       (m)   makefile=$OPTARG;;
158       (r)   remote_mode=batch;;
159       (s)   suf=$OPTARG;;
160       (u)   compile_utility_programs=true;;
161       (\?)  printf "\n  +++ unknown option $OPTARG \n";
162             locat=parameter; exit;;
163   esac
164 done
165
166
167
168    # BATCH-MODE IST ZUR ZEIT NICHT FUNKTIONSFAEHIG
169 if [[ $remote_mode = batch ]]
170 then
171    printf "\n  +++ sorry, batch mode does not work! \n"
172    locat=parameter; exit
173 fi
174
175
176
177    # PRUEFEN, OB KONFIGURATIONS-DATEI VORHANDEN
178 if [[ ! -f $config_file ]]
179 then
180    printf "\n  +++ configuration file: "
181    printf "\n           $config_file"
182    printf "\n      does not exist"
183    locat=configuration; exit 
184 fi
185
186
187
188    # LOKALEN RECHNER ERMITTELN
189 local_host_real_name=$(hostname)
190# local_addres=$(nslookup `hostname` 2>&1 | grep "Address:" | tail -1 | awk '{print $2}')
191
192
193
194    # HOST-IDENTIFIER (local_host) AUS KONFIGURATIONSDATEI BESTIMMEN
195 line=""
196 grep  "%host_identifier"  $config_file  >  $tmp_mbuild
197 while read line
198 do
199    if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
200    then
201       HOSTNAME=`echo $line | cut -d" " -s -f2`
202       host_identifier=`echo $line | cut -d" " -s -f3`
203       if [[ $local_host_real_name = $HOSTNAME ]]
204       then
205          local_host=$host_identifier
206          break
207       fi
208    fi
209 done < $tmp_mbuild
210
211 if [[ "$local_host" = "" ]]
212 then
213    printf "\n  +++ no host identifier found in configuration file \"$config_file\""
214    printf "\n      for local host \"$local_host_real_name\"."
215    printf "\n      Please add line"
216    printf "\n      \"\%host_identifier $local_host_real_name <identifier>\""
217    printf "\n      to the configuration file."
218    locat=local_host; exit
219 fi
220
221
222
223 [[ $local_host_real_name = scirocco ]]  &&  scirocco=true
224 [[ $local_host_real_name = fimm.bccs.uib.no ]]  &&  fimm=true
225
226
227
228 if [[ $local_host != ibms ]]
229 then
230    config_file=$PWD/$config_file
231 else
232    config_file=`pwd`/$config_file
233 fi
234
235
236 
237    # BENUTZERNAMEN AUF LOKALEM RECHNER AUS KONFIGURATIONSDATEI ERMITTELN
238 line=""
239 grep  " $local_host" $config_file | grep "%remote_username"  >  $tmp_mbuild
240 while read line
241 do
242    if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
243    then
244       local_username=`echo $line | cut -d" " -s -f2`
245    fi
246 done < $tmp_mbuild
247
248
249 if [[ "$local_username" = "" ]]
250 then
251    printf "\n  +++ no user name found in configuration file"
252    printf "\n      for local host \"$local_host\" "
253    locat=config_file; exit
254 fi
255
256
257    # LOKALEN QUELLTEXTPFAD ERMITTELN.
258    # ZUERST PRUEFEN, OB EIN GLOBALER QUELLTEXTPFAD FUER ALLE RECHNER
259    # VEREINBART WURDE.
260    # DAZU ZUNAECHST ALLE IN DER KONFIGURATIONSDATEI VEREINBARTEN GLOBALEN
261    # VARIABLEN SETZEN, WEIL DIESE EVTL. IN PFADNAMEN VERWENDET WERDEN
262 line=""
263 grep "%" $config_file  >  $tmp_mbuild
264 while read line
265 do
266    if [[ "$line" != ""  &&  "$(echo $line | cut -d" " -s -f3)" = ""  &&  $(echo $line | cut -c1) != "#" ]]
267    then
268       var=`echo $line | cut -d" " -s -f1 | cut -c2-`
269       value=`echo $line | cut -d" " -s -f2`
270       eval export $var=\$value
271#       eval echo \"   $var=\$$var \"   # AUSGABE ZU TESTZWECKEN
272    fi
273 done < $tmp_mbuild
274
275    # NUN PRUEFEN, OB EIN GLOBALER QUELLTEXTPFAD VEREINBART WURDE
276 line=""
277 grep "%source_path" $config_file  >  $tmp_mbuild
278 while read line
279 do
280    if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
281    then
282       if [[ "$(echo $line | cut -d" " -s -f3)" = "" ]]
283       then
284          global_source_path=`echo $line | cut -d" " -s -f2`
285       fi
286    fi
287 done < $tmp_mbuild
288
289 line=""
290 grep  " $local_host" $config_file | grep "%source_path"  >  $tmp_mbuild
291 while read line
292 do
293    if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
294    then
295       local_source_path=`echo $line | cut -d" " -s -f2`
296    fi
297 done < $tmp_mbuild
298
299 if [[ "$local_source_path" = "" ]]
300 then
301    if [[ "$global_source_path" != "" ]]
302    then
303       local_source_path=$global_source_path
304    else
305       printf "\n  +++ no source path found in configuration file"
306       printf "\n      for local host \"$local_host\" "
307       printf "\n      please set \"\%source_path\" in configuration file"
308       locat=config_file; exit
309    fi
310 fi
311 eval local_source_path=$local_source_path
312 eval local_source_path=$local_source_path
313
314
315
316    # GLOBALEN DEPOSITORY-PFAD ERMITTELN
317 line=""
318 grep "%depository_path" $config_file  >  $tmp_mbuild
319 while read line
320 do
321    if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
322    then
323       if [[ "$(echo $line | cut -d" " -s -f3)" = "" ]]
324       then
325          global_depository_path=`echo $line | cut -d" " -s -f2`
326       fi
327    fi
328 done < $tmp_mbuild
329
330
331
332    # PRUEFEN, OB IN KONFIGURATIONSDATEI EIN HAUPTPROGRAMM
333    # VEREINBART WURDE
334 if [[ $(grep -c "%mainprog" $config_file) != 1 ]]
335 then
336    printf "\n  +++ no main program or more than one main program defined"
337    printf "\n      in configuration file"
338    locat=configuration; exit
339 else
340    line=`grep "%mainprog" $config_file`
341    if [[ "$line" = ""  ||  $(echo $line | cut -c1) = "#" ]]
342    then
343       printf "\n  +++ no main program defined in configuration file"
344       locat=configuration; exit
345    fi
346    mainprog=`echo $line | cut -d" " -s -f2 | cut -d"." -f1`
347 fi
348
349
350
351    # MAKEFILE vorhanden
352 [[ "$makefile" = "" ]]  &&  makefile=$local_source_path/Makefile
353 if [[ ! -f $makefile ]]
354 then
355    printf "\n  +++ makefile: "
356    printf "\n           $makefile"
357    printf "\n      does not exist"
358    locat=makefile; exit 
359 fi
360
361
362    # HEADER-AUSGABE (TEIL1: MELDUNGEN UEBER LOKALEN RECHNER)
363 calltime=$(date)
364 printf "\n"
365 printf "#------------------------------------------------------------------------# \n"
366 printf "| $version$calltime | \n"
367 printf "|                                                                        | \n"
368 column1="called on:"; column2=$local_host_real_name
369 printf "| $column1$column2 | \n"
370 column1="local username:"; column2=$local_username
371 printf "| $column1$column2 | \n"
372 column1="local IP-addres:"; column2=$local_addres
373 printf "| $column1$column2 | \n"
374 column1="config file:"; column2=$config_file
375 printf "| $column1$column2 | \n"
376 column1="makefile:"; column2=$makefile
377 printf "| $column1$column2 | \n"
378 column1="local source path:"; column2=$local_source_path
379 printf "| $column1$column2 | \n"
380 printf "#------------------------------------------------------------------------# \n"
381
382# printf "|                                                                        | \n"
383
384
385 if [[ $compile_utility_programs = false ]]
386 then
387
388       # IN JEDEM FALL ALLEN DATEIEN WRITE-PERMIT GEBEN, DAMIT ES AUF
389       # DEN REMOTE-RECHNERN NICHT EVTL. ZU PROBLEMEN BEIM UEBERSCHREIBEN KOMMT
390    cd  $local_source_path
391    printf "\n\n  *** tar of makefile and source files in $local_source_path" 
392    tar -cf  ${mainprog}_sources.tar  Makefile  *.$suf
393    printf "\n"
394
395 fi
396
397
398
399    # BESTAETIGUNG ZUM WEITERMACHEN EINHOLEN
400 if [[ $host = all ]]
401 then
402    printf "\n  *** updates will be made for ALL hosts found in"
403    printf "\n      the configuration file"
404 else
405    printf "\n  *** update will be made for host \"$host\" "
406 fi
407
408 if [[ $silent = false ]]
409 then
410    answer=dummy
411    printf "\n\n"
412    while [[ "$answer" != y  &&  "$answer" != Y  &&  "$answer" != n  &&  "$answer" != N ]]
413    do
414       printf " >>> continue (y/n) ?  "
415       read  answer
416    done
417    if [[ $answer = n  ||  $answer = N ]]
418    then
419       locat=user_abort; exit
420    fi
421 fi
422 
423 
424
425   
426    # GENERIERUNG DER AKTUELLEN MODELLVERSION FUER ALLE RECHNER-/UEBERSETZUNGS-
427    # VERSIONEN, DIE IN DER KONFIGURATIONSDATEI GEFUNDEN WERDEN
428 printf "\n  *** scanning configuration file for host(s) ..."
429
430 grep  %fopts  $config_file  >  $tmp_mbuild
431 while read line
432 do
433       # KOMMENTARZEILEN UEBERSPRINGEN
434    [[ $(echo $line | cut -c1) = "#" ]]  &&  continue
435    (( ihost = ihost + 1 ))
436    hostline[$ihost]="$line"
437 done < $tmp_mbuild
438
439 
440 while (( ih < ihost ))
441 do
442
443    (( ih = ih + 1 ))
444
445       # REMOTE-RECHNER UND UEBERSETZUNGS-VERSION FESTSTELLEN
446       # NUR WEITERMACHEN, WENN ENTSPRECHENDER REMOTE-RECHNER MITTELS
447       # SHELLSCRIPT-OPTION AUCH AUSGEWAEHLT WURDE
448    remote_host_string=`echo ${hostline[$ih]} | cut -d" " -s -f3-`
449    remote_host=`echo $remote_host_string | cut -d" " -f1`
450    if [[ $host != all ]]
451    then
452       [[ $remote_host != $host ]]  &&  continue
453    fi
454    host_found=true
455    condition1=`echo $remote_host_string | cut -d" " -s -f2`
456    if [[ $condition1 = $remote_host ]]
457    then
458       condition1=""
459    else
460       condition2=`echo $remote_host_string | cut -d" " -s -f3`
461    fi
462
463    netcdf_inc=""
464    netcdf_lib=""
465
466       # IP-ADRESSE DES REMOTE-RECHNERS BESTIMMEN
467    case  $remote_host  in
468        (lcmuk)          remote_addres=130.75.105.2;;
469        (lcsgib)         remote_addres=130.73.232.102;;
470        (lcsgih)         remote_addres=130.75.4.103;;
471        (lctit)          remote_addres=172.17.75.161;;
472        (lcxt4)          remote_addres=129.177.20.113;;
473        (decalpha)       remote_addres=165.132.26.56;;
474        (ibmb)           remote_addres=130.73.230.10;;
475        (ibmh)           remote_addres=130.75.4.10;;
476        (ibms)           remote_addres=150.183.5.101;;
477        (ibmy)           remote_addres=165.132.26.58;;
478        (nech)           remote_addres=136.172.44.192;;
479        (neck)           remote_addres=133.5.178.11;;
480        (ground.yonsei.ac.kr) remote_addres=134.75.155.33;;
481        (*)              if [[ $local_host != $remote_host ]]
482                         then
483                            printf "\n  +++ remote host \"$remote_host\" unknown";
484                            printf "\n      please inform S. Raasch!"
485                         fi;;
486    esac
487
488
489       # REMOTE-USERNAMEN ERMITTELN
490    line=""
491    found=false
492    grep  "$remote_host_string" $config_file | grep "%remote_username"  >  $tmp_mbuild
493    while read line1
494    do
495
496       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
497       then
498          line="$line1"
499       fi
500
501       if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
502       then
503          remote_username=`echo $line | cut -d" " -s -f2`
504          found=true
505       fi
506
507    done < $tmp_mbuild
508
509    if [[ $found = false ]]
510    then
511       printf "\n  +++ no remote username found in configuration file"
512       printf "\n      for \"$remote_host_string\" "
513       locat=config_file; exit
514    fi
515
516
517       # REMOTE-QUELLTEXTPFAD ERMITTELN
518    line=""
519    remote_source_path=""
520    grep  "$remote_host_string" $config_file | grep "%source_path"  >  $tmp_mbuild
521    while read line1
522    do
523
524       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
525       then
526          line="$line1"
527       fi
528
529       if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
530       then
531          remote_source_path=`echo $line | cut -d" " -s -f2`
532       fi
533
534    done < $tmp_mbuild
535
536    if [[ "$remote_source_path" = "" ]]
537    then
538       if [[ "$global_source_path" != "" ]]
539       then
540          remote_source_path=$global_source_path
541       else
542          printf "\n  +++ no source path found in configuration file"
543          printf "\n      for \"$remote_host_string\" "
544          locat=config_file; exit
545       fi
546    fi
547
548    remote_ud=${remote_source_path}/../UTIL
549    remote_ud=$(eval echo $remote_ud)
550
551
552       # REMOTE-PFAD FUER MAKE-DEPOSITORY ERMITTELN
553    remote_md=""
554    line=""
555    grep  "$remote_host_string" $config_file | grep "%depository_path"  >  $tmp_mbuild
556    while read line1
557    do
558
559       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
560       then
561          line="$line1"
562       fi
563
564       if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
565       then
566          remote_md=`echo $line | cut -d" " -s -f2`
567       fi
568
569    done < $tmp_mbuild
570
571    if [[ "$remote_md" = "" ]]
572    then
573       if [[ "$global_depository_path" != "" ]]
574       then
575          remote_md=$global_depository_path
576       else
577          printf "\n  +++ no depository path found in configuration file"
578          printf "\n      for \"$remote_host_string\" "
579          printf "\n      please set \"\%depository_path\" in configuration file"
580          locat=config_file; exit
581       fi
582    fi
583
584    remote_md=$(eval echo $remote_md)
585    [[ "$condition1" != "" ]]  &&  remote_md=${remote_md}_$condition1
586    [[ "$condition2" != "" ]]  &&  remote_md=${remote_md}_$condition2
587
588
589       # COMPILERNAMEN ERMITTELN
590    line=""
591    found=false
592    grep  "$remote_host_string" $config_file | grep "%compiler_name "  >  $tmp_mbuild
593    while read line1
594    do
595
596       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
597       then
598          line="$line1"
599       fi
600
601       if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
602       then
603          compiler_name=`echo $line | cut -d" " -s -f2`
604          found=true
605       fi
606
607    done < $tmp_mbuild
608
609    if [[ $found = false ]]
610    then
611       printf "\n  +++ no compiler name found in configuration file"
612       printf "\n      for \"$remote_host_string\" "
613       locat=config_file; exit
614    fi
615
616
617       # BEI BENUTZUNG EINES PARALLELEN COMPILERS MUSS AUCH EIN
618       # SERIELLER COMPILERNAME ERMITTELT WERDEN
619    if [[ $(echo $remote_host_string | grep -c parallel) = 1 ]]
620    then
621       line=""
622       found=false
623       grep  "$remote_host_string" $config_file | grep "%compiler_name_ser"  >  $tmp_mbuild
624       while read line1
625       do
626
627          if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
628          then
629             line="$line1"
630          fi
631
632          if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
633          then
634             compiler_name_ser=`echo $line | cut -d" " -s -f2`
635             found=true
636          fi
637
638       done < $tmp_mbuild
639
640       if [[ $found = false ]]
641       then
642          printf "\n  +++ no serial compiler name found in configuration file"
643          printf "\n      for \"$remote_host_string\" "
644          locat=config_file; exit
645       fi
646    else
647       compiler_name_ser=$compiler_name
648    fi
649
650
651
652       # PRAEPROZESSOR-OPTIONEN/DIREKTIVEN ERMITTELN
653    line=""
654    found=false
655    grep  "$remote_host_string" $config_file | grep "%cpp_options"  >  $tmp_mbuild
656    while read line1
657    do
658
659       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
660       then
661          line="$line1"
662       fi
663
664       if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
665       then
666             # EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
667          cpp_options=`echo $line | cut -d" " -s -f2 | sed 's/::/%DUM%/g' | sed 's/:/ /g' | sed 's/%DUM%/:/g'`
668          found=true
669       fi
670
671    done < $tmp_mbuild
672
673    if [[ $found = false ]]
674    then
675       printf "\n  +++ no preprocessor options found in configuration file"
676       printf "\n      for \"$remote_host_string\" "
677       locat=config_file; exit
678    fi
679
680
681       # RECHNERSPEZIFISCHE CPP-DIREKTIVEN HINZUFUEGEN
682    for  string  in  $remote_host_string
683    do
684       if [[ $(echo $remote_host | cut -c1-2) = lc  &&  $(echo $string | cut -c1-2) = lc ]]
685       then
686          cpp_options="$cpp_options -D__lc "
687       elif [[ $(echo $remote_host | cut -c1-3) = ibm  &&  $(echo $string | cut -c1-3) = ibm ]]
688       then
689          cpp_options="${cpp_options},-D__ibm"
690       elif [[ $(echo $remote_host | cut -c1-3) = nec  &&  $(echo $string | cut -c1-3) = nec ]]
691       then
692          cpp_options="${cpp_options} -D__nec"
693       else
694          if [[ $(echo $remote_host | cut -c1-3) = ibm ]]
695          then
696             cpp_options="${cpp_options},-D__$string"
697          else
698             cpp_options="$cpp_options -D__$string "
699          fi
700       fi
701    done
702
703
704
705       # NETCDF-OPTIONEN ERMITTELN
706    line=""
707    grep  "$remote_host_string" $config_file | grep "%netcdf_inc"  >  $tmp_mbuild
708    while read line1
709    do
710
711       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
712       then
713          line="$line1"
714       fi
715
716       if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
717       then
718             # EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
719          netcdf_inc=`echo $line | cut -d" " -s -f2 | sed 's/::/%DUM%/g' | sed 's/:/ /g' | sed 's/%DUM%/:/g'`
720       fi
721
722    done < $tmp_mbuild
723
724    line=""
725    grep  "$remote_host_string" $config_file | grep "%netcdf_lib"  >  $tmp_mbuild
726    while read line1
727    do
728
729       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
730       then
731          line="$line1"
732       fi
733
734       if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
735       then
736             # EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
737          netcdf_lib=`echo $line | cut -d" " -s -f2 | sed 's/::/%DUM%/g' | sed 's/:/ /g' | sed 's/%DUM%/:/g'`
738       fi
739
740    done < $tmp_mbuild
741
742
743
744       # COMPILEROPTIONEN ERMITTELN
745    line=""
746    found=false
747    grep  "$remote_host_string" $config_file | grep "%fopts"  >  $tmp_mbuild
748    while read line1
749    do
750
751       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
752       then
753          line="$line1"
754       fi
755
756       if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
757       then
758             # EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
759          compiler_options=`echo $line | cut -d" " -s -f2 | sed 's/::/%DUM%/g' | sed 's/:/ /g' | sed 's/%DUM%/:/g'`
760          found=true
761
762             # NETCDF-INCLUDEVERZEICHNIS HINZUFUEGEN
763          compiler_options="$compiler_options $netcdf_inc"
764       fi
765
766    done < $tmp_mbuild
767
768    if [[ $found = false ]]
769    then
770       printf "\n  +++ no compiler options found in configuration file"
771       printf "\n      for \"$remote_host_string\" "
772       locat=config_file; exit
773    fi
774
775
776
777       # MPI LIBRARY ERMITTELN
778    line=""
779    found=false
780    grep  "$remote_host_string" $config_file | grep "%mpilib"  >  $tmp_mbuild
781    while read line1
782    do
783
784       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
785       then
786          line="$line1"
787       fi
788
789       if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
790       then
791             # EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
792          mpilib=`echo $line | cut -d" " -s -f2`
793          found=true
794       fi
795
796    done < $tmp_mbuild
797
798    [[ $found = false ]]  &&  mpilib=mpt
799
800
801
802
803       # LADER-OPTIONEN ERMITTELN
804    line=""
805    found=false
806    grep  "$remote_host_string" $config_file | grep "%lopts"  >  $tmp_mbuild
807    while read line1
808    do
809
810       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
811       then
812          line="$line1"
813       fi
814
815       if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
816       then
817             # EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
818          loader_options=`echo $line | cut -d" " -s -f2 | sed 's/::/%DUM%/g' | sed 's/:/ /g' | sed 's/%DUM%/:/g'`
819          found=true
820
821             # NETCDF-LIBRARY HINZUFUEGEN
822          loader_options="$loader_options $netcdf_lib"
823       fi
824
825    done < $tmp_mbuild
826
827    if [[ $found = false ]]
828    then
829       printf "\n  +++ no loader options found in configuration file"
830       printf "\n      for \"$remote_host_string\" "
831       locat=config_file; exit
832    fi
833
834
835    printf "\n\n#------------------------------------------------------------------------# \n"
836    if [[ $remote_host = $local_host ]]
837    then
838       column1="remote_host:"; column2="$remote_host (= local host!)"
839    else
840       column1="remote_host:"; column2=$remote_host
841    fi
842    printf "| $column1$column2 | \n"
843    printf "|                                                                        | \n"
844    column1="conditions:"; column2="$condition1 $condition2"
845    printf "| $column1$column2 | \n"
846    column1="make depository:"; column2=$remote_md
847    printf "| $column1$column2 | \n"
848    line=$(echo "$remote_md" | cut -c51-)
849    while [[ "$line" != "" ]]
850    do
851       column1=""
852       column2=$line
853       printf "| $column1$column2 | \n"
854       line=$(echo "$line" | cut -c51-)
855    done
856    if [[ $compile_utility_programs = true ]]
857    then
858       column1="utility directory:"; column2=$remote_ud
859       printf "| $column1$column2 | \n"
860    fi
861    column1="username:"; column2=$remote_username
862    printf "| $column1$column2 | \n"
863    column1="addres:"; column2=$remote_addres
864    printf "| $column1$column2 | \n"
865    column1="compiler:"; column2=$compiler_name
866    printf "| $column1$column2 | \n"
867    if [[ $compile_utility_programs = true ]]
868    then
869       column1="serial compiler:"; column2=$compiler_name_ser
870       printf "| $column1$column2 | \n"
871    fi
872    column1="cpp options:"; column2=$cpp_options
873    printf "| $column1$column2 | \n"
874    line=$(echo "$cpp_options" | cut -c51-)
875    while [[ "$line" != "" ]]
876    do
877       column1=""
878       column2=$line
879       printf "| $column1$column2 | \n"
880       line=$(echo "$line" | cut -c51-)
881    done
882    column1="compiler options:"; column2=$compiler_options
883    printf "| $column1$column2 | \n"
884    line=$(echo "$compiler_options" | cut -c51-)
885    while [[ "$line" != "" ]]
886    do
887       column1=""
888       column2=$line
889       printf "| $column1$column2 | \n"
890       line=$(echo "$line" | cut -c51-)
891    done
892    if [[ $( echo $remote_host | cut -c1-5 ) = lcsgi ]]
893    then
894       column1="mpi library:"; column2=$mpilib
895       printf "| $column1$column2 | \n"
896    fi
897    column1="loader options:"; column2=$loader_options
898    printf "| $column1$column2 | \n"
899    line=$(echo "$loader_options" | cut -c51-)
900    while [[ "$line" != "" ]]
901    do
902       column1=""
903       column2=$line
904       printf "| $column1$column2 | \n"
905       line=$(echo "$line" | cut -c51-)
906    done
907    printf "#------------------------------------------------------------------------# \n"
908
909    if [[ $silent = false ]]
910    then
911       answer=dummy
912       printf "\n\n"
913       while [[ "$answer" != y  &&  "$answer" != Y  && "$answer" != c  &&  "$answer" != C  && "$answer" != s  &&  "$answer" != S  &&  "$answer" != a  &&  "$answer" != A ]]
914       do
915          printf " >>> continue (y(es)/c(ontinue)/a(bort)/s(skip)) ?  "
916          read  answer
917       done
918       if [[ $answer = a  ||  $answer = A ]]
919       then
920          locat=user_abort; exit
921       fi
922       if [[ $answer = c  ||  $answer = C ]]
923       then
924          silent=false
925       fi
926       if [[ $answer = s  ||  $answer = S ]]
927       then
928          continue
929       fi
930    fi
931
932
933    if [[ $remote_mode = batch ]]
934    then
935
936          # BATCH-JOB PARAMETER SETZEN
937       case  $remote_host  in
938           (t3eb)           queue=berte; memory=60; cputime=1000; xoption="-X 0";;
939           (t3eh)           queue=comp_t3e; memory=60; cputime=360;;
940           (t3ej2)          queue=normal; memory=60; cputime=1000; xoption="-X 0";;
941           (t3ej5|ground.yonsei.ac.kr)  printf "\n  --- remote host \"$remote_host\" does not allow batch jobs"; continue;;
942       esac
943
944
945          # BATCH-JOB ZUSAMMENSTELLEN
946       printf "\n  *** creating batch-job for remote host"
947       echo " "  >  mbuild_job
948
949          # AUF CRAY-RECHNERN IN JUELICH WIRD KEIN BENUTZER-PROFILE AUSGEFUEHRT
950          # DIES WIRD HIER GETAN, UM PFADE USW. ZU SETZEN
951       if [[ $remote_host = t3ej2 ]]
952       then
953          echo "set +vx"                       >>  mbuild_job
954          echo ". .profile"                    >>  mbuild_job
955          echo "set -x"                        >>  mbuild_job
956       fi
957
958          # AUF CRAY-RECHNERN GELADENE MODULE AUFLISTEN
959       if [[ $host = t3eb  || $host = t3eh  ||  $host = t3ej2 ]]
960       then
961          echo "module list"                   >>  mbuild_job
962       fi
963
964
965          # WECHSEL IN TEMPORAERES VERZEICHNIS
966       echo "cd ${remote_md}"  >>  mbuild_job
967
968
969          # AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
970       echo  "scp  ${local_username}@${local_addres}:~/modell/code_3dp/palm_current_version/${mainprog}_sources.tar  ${mainprog}_sources.tar"  >>  mbuild_job
971#       echo  "[[ \$? != 0 ]]  &&  (echo "+++ scp failed"; exit)"  >>  mbuild_job
972
973
974          # FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
975       echo  "[[ -f ${mainprog}_current_version.tar ]]  &&  tar -xvf  ${mainprog}_current_version.tar"  >>  mbuild_job
976
977
978          # AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
979       echo  "tar -xvf  ${mainprog}_sources.tar"              >>  mbuild_job
980
981
982          # MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
983       echo  "make  PROG=$mainprog  F90=$compiler_name  COPT=\"$cpp_options\"  F90FLAGS=\"$compiler_options\"  LDFLAGS=\"$loader_options\" "  >>  mbuild_job
984       echo  "chmod  u+w  *"                                  >>  mbuild_job
985
986          # NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
987       echo  "tar -cvf  ${mainprog}_current_version.tar  *.f90  *.o"  >>  mbuild_job
988
989
990          # AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
991       echo  "make  clean"                                    >>  mbuild_job
992       echo  "rm ${mainprog}_sources.tar"                     >>  mbuild_job
993       echo  "rm *.f90 Makefile"                              >>  mbuild_job
994
995
996
997          # JOB MITTELS SUBJOB STARTEN
998       printf "\n  *** sending batch job to remote host"
999#       subjob  $xoption  -h $remote_host  -q $queue  -m $memory  -t $cputime  -v  mbuild_job
1000
1001
1002          # JOBFILE LOESCHEN
1003#       rm  aljob
1004
1005    else
1006
1007       if [[ $remote_host != $local_host ]]
1008       then
1009
1010          if [[ $compile_utility_programs = false ]]
1011          then
1012
1013                # AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1014                # FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
1015             echo "  *** copying \"${mainprog}_sources.tar\" to \"${remote_addres}:${remote_md}/\" "
1016             if [[ $remote_host != lctit ]]
1017             then
1018                ssh  ${remote_username}@${remote_addres} "[[ ! -d ${remote_md} ]]  &&  (echo \"  *** ${remote_md} will be created\"; mkdir -p  ${remote_md})"
1019             else
1020                   # TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1021                   # MIT SSH, DESHALB AUFRUF PER PIPE
1022                print "[[ ! -d ${remote_md} ]]  &&  (echo \"  *** ${remote_md} will be created\"; mkdir -p  ${remote_md})"  |  ssh ${remote_username}@${remote_addres}  2>&1
1023             fi
1024             if [[ $local_host = decalpha ]]
1025             then
1026                   # DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
1027                   # IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1028                   # KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1029                remote_md=`echo $remote_md | sed 's/\$HOME\///'`
1030                /bin/scp  ${local_source_path}/${mainprog}_sources.tar  ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
1031             else
1032                scp  ${local_source_path}/${mainprog}_sources.tar  ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
1033             fi
1034
1035
1036
1037                # FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
1038             echo "  *** untar previous update on remote host, if existing"
1039             if [[ $remote_host != lctit ]]
1040             then
1041                ssh  ${remote_username}@${remote_addres}  "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]]  &&  tar -xf  ${mainprog}_current_version.tar"
1042             else
1043                   # TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1044                   # MIT SSH, DESHALB AUFRUF PER PIPE
1045                print  "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]]  &&  tar -xf  ${mainprog}_current_version.tar"  |  ssh  ${remote_username}@${remote_addres}  2>&1
1046             fi
1047
1048
1049                # AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
1050             echo "  *** untar actual sources on remote host"
1051             if [[ $remote_host != lctit ]]
1052             then
1053                ssh  ${remote_username}@${remote_addres}  "cd ${remote_md}; tar -xf  ${mainprog}_sources.tar"
1054             else
1055                   # TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1056                   # MIT SSH, DESHALB AUFRUF PER PIPE
1057                print  "cd ${remote_md}; tar -xf  ${mainprog}_sources.tar"  |  ssh  ${remote_username}@${remote_addres}  2>&1
1058             fi
1059
1060
1061                # MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1062                # KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
1063                # BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
1064                # Z.B. DIE PFADE ZUM COMPILER)
1065             echo "  *** execute \"make\" on remote host"
1066
1067             if [[ $remote_host = nech ]]
1068             then
1069                make_call_string="sxmake  PROG=$mainprog  F90=$compiler_name  COPT=\"$cpp_options\"  F90FLAGS=\"$compiler_options\"  LDFLAGS=\"$loader_options\" "
1070             else
1071                make_call_string="make  PROG=$mainprog  F90=$compiler_name  COPT=\"$cpp_options\"  F90FLAGS=\"$compiler_options\"  LDFLAGS=\"$loader_options\" "
1072             fi
1073
1074             if [[ $remote_host = t3eh ]]
1075             then
1076       
1077                print "xterm\nexit\n cd ${remote_md}; make  PROG=$mainprog  F90=$compiler_name  COPT=\"$cpp_options\"  F90FLAGS=\"$compiler_options\"  LDFLAGS=\"$loader_options\" " | ssh  ${remote_username}@${remote_addres} 2>&1 | tee ${remote_host}_last_make_protokoll
1078
1079             elif [[ $remote_host = t3ej2  ||  $remote_host = ibms  ||  $remote_host = ibmy ]]
1080             then
1081
1082                ssh  ${remote_username}@${remote_addres}  "cd ${remote_md}; echo '$make_call_string' > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 | tee ${remote_host}_last_make_protokoll
1083
1084             elif [[ $remote_host = ibmb  ||  $remote_host = ibmh ]]
1085             then
1086
1087                print "export OBJECT_MODE=64; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" | ssh  ${remote_username}@${remote_addres} 2>&1 | tee ${remote_host}_last_make_protokoll
1088
1089             elif [[ $remote_host = lcsgib  ||  $remote_host = lcsgih ]]
1090             then
1091
1092                print ". /usr/share/modules/init/bash; module load $mpilib; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" | ssh  ${remote_username}@${remote_addres} 2>&1 | tee ${remote_host}_last_make_protokoll
1093#                print ". /usr/share/modules/init/bash; module load mvapich2/1.2rc1-intel; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" | ssh  ${remote_username}@${remote_addres} 2>&1 | tee ${remote_host}_last_make_protokoll
1094#                print ". /usr/share/modules/init/bash; module load mvapich2; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" | ssh  ${remote_username}@${remote_addres} 2>&1 | tee ${remote_host}_last_make_protokoll
1095
1096             elif [[ $remote_host = lctit ]]
1097             then
1098
1099                echo  " "  >  ${remote_host}_last_make_protokoll
1100                while [[ $(cat ${remote_host}_last_make_protokoll | grep -c "Forwarding to N1GE") = 0 ]]
1101                do
1102                   print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" | ssh  ${remote_username}@${remote_addres} 2>&1 | tee ${remote_host}_last_make_protokoll
1103                done
1104
1105             elif [[ $remote_host = lcxt4 ]]
1106             then
1107
1108                print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" | ssh  ${remote_username}@${remote_addres} 2>&1 | tee ${remote_host}_last_make_protokoll
1109
1110             else
1111
1112                print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" | ssh  ${remote_username}@${remote_addres} 2>&1 | tee ${remote_host}_last_make_protokoll
1113
1114             fi
1115
1116             if [[ $(grep -c MAKE_ERROR ${remote_host}_last_make_protokoll) != 0 ]]
1117             then
1118                printf "\a\n  +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1119                if [[ $silent = false ]]
1120                then
1121                   answer=dummy
1122                   printf "\n"
1123                   while [[ "$answer" != c  &&  "$answer" != k ]]
1124                   do
1125                      printf "  >>> continue / list errors / kill mbuild (c/l/k) ? "
1126                      read  answer
1127                      if [[ "$answer" = l ]]
1128                      then
1129                         more ${remote_host}_last_make_protokoll
1130                      fi
1131                   done
1132                   if [[ $answer = k ]]
1133                   then
1134                      locat=user_abort; exit
1135                   fi
1136                fi
1137             fi
1138
1139
1140
1141                # NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
1142             printf "\n  *** tar update on remote host ..."
1143             if [[ $remote_host != lctit ]]
1144             then
1145                ssh  ${remote_username}@${remote_addres}  "cd ${remote_md}; chmod u+w *; tar -cf  ${mainprog}_current_version.tar  ${mainprog}  *.f90 *.o *.mod"
1146             else
1147                   # TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1148                   # MIT SSH, DESHALB AUFRUF PER PIPE
1149                print  "cd ${remote_md}; chmod u+w *; tar -cf  ${mainprog}_current_version.tar  ${mainprog}  *.f90 *.o *.mod"  |  ssh  ${remote_username}@${remote_addres}  2>&1
1150             fi
1151
1152
1153                # AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
1154#             printf "\n  *** \"make clean\" on remote host ..."
1155#             ssh  ${remote_username}@${remote_addres}  "cd ${remote_md}; make clean; rm ${mainprog}_sources.tar; rm *.f90 Makefile"
1156#             printf "\n"
1157
1158
1159
1160
1161             # GLEICHE AKTIONEN FUER DIE UTILITY-PROGRAMME DURCHFUEHREN
1162             # AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1163             # FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
1164          elif [[ $compile_utility_programs = true ]]
1165          then
1166
1167             printf "\n\n"
1168             echo "  *** copying scripts and utility programs to \"${remote_addres}:${remote_ud}/\" "
1169             cd  ${local_source_path}/../SCRIPTS
1170
1171             if [[ $remote_host != lctit ]]
1172             then
1173                ssh  ${remote_username}@${remote_addres} "[[ ! -d ${remote_ud} ]]  &&  (echo \"  *** ${remote_ud} will be created\"; mkdir -p  ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]]  &&  (echo \"  *** ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)"
1174             else
1175                   # TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1176                   # MIT SSH, DESHALB AUFRUF PER PIPE
1177                print "[[ ! -d ${remote_ud} ]]  &&  (echo \"  *** ${remote_ud} will be created\"; mkdir -p  ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]]  &&  (echo \"  *** ${remote_ud}/../SCRIPTS will be created\"; mkdir -p  ${remote_ud}/../SCRIPTS)"  |  ssh ${remote_username}@${remote_addres}  2>&1
1178             fi
1179
1180                # KOPIEREN DER SCRIPTE
1181             if [[ $local_host = decalpha ]]
1182             then
1183                   # DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
1184                   # IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1185                   # KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1186                remote_ud=`echo $remote_ud | sed 's/\$HOME\///'`
1187                /bin/scp  batch_scp mbuild mrun subjob  ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS  >  /dev/null
1188             else
1189                scp  batch_scp mbuild mrun subjob  ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS  >  /dev/null
1190             fi
1191
1192             cd  -  > /dev/null
1193             cd  ${local_source_path}/../UTIL
1194
1195
1196                # KOPIEREN DER UTILITY-PROGRAMME
1197             if [[ $local_host = decalpha ]]
1198             then
1199                   # DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
1200                   # IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1201                   # KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1202                remote_ud=`echo $remote_ud | sed 's/\$HOME\///'`
1203                /bin/scp  Makefile  *.f90  ${remote_username}@${remote_addres}:${remote_ud}  >  /dev/null
1204             else
1205                scp  Makefile  *.f90  ${remote_username}@${remote_addres}:${remote_ud}  >  /dev/null
1206             fi
1207
1208
1209
1210                # MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1211                # KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
1212                # BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
1213                # Z.B. DIE PFADE ZUM COMPILER)
1214             echo "  *** execute \"make\" on remote host"
1215
1216             if [[ $remote_host = nech ]]
1217             then
1218                make_call_string="sxmake  F90=$compiler_name  F90_SER=$compiler_name_ser  COPT=\"$cpp_options\"  F90FLAGS=\"$compiler_options\"  LDFLAGS=\"$loader_options\" "
1219             else
1220                make_call_string="make  F90=$compiler_name  F90_SER=$compiler_name_ser  COPT=\"$cpp_options\"  F90FLAGS=\"$compiler_options\"  LDFLAGS=\"$loader_options\" "
1221             fi
1222
1223             if [[ $remote_host = ibms  ||  $remote_host = ibmy ]]
1224             then
1225
1226                ssh  ${remote_username}@${remote_addres}  "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR"
1227
1228             elif [[ $remote_host = ibmb  ||  $remote_host = ibmh ]]
1229             then
1230
1231                print "export OBJECT_MODE=64; cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" | ssh  ${remote_username}@${remote_addres}
1232
1233             elif [[ $remote_host = lctit ]]
1234             then
1235
1236                echo  " "  >  ${remote_host}_last_make_protokoll
1237                while [[ $(cat ${remote_host}_last_make_protokoll | grep -c "Forwarding to N1GE") = 0 ]]
1238                do
1239                   print "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" | ssh  ${remote_username}@${remote_addres} 2>&1 | tee ${remote_host}_last_make_protokoll
1240                done
1241
1242             else
1243
1244                print "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" | ssh  ${remote_username}@${remote_addres} 2>&1 | tee ${remote_host}_last_make_protokoll
1245
1246             fi
1247
1248          fi    # ENDE UEBERSETZUNG DER UTILITY-PROGRAMME
1249
1250          rm -rf  ${remote_host}_last_make_protokoll
1251
1252       else
1253
1254          if [[ $compile_utility_programs = false ]]
1255          then
1256
1257                # DEPOSITORY VERZEICHNIS ERZEUGEN, FALLS NOCH NICHT VORHANDEN
1258             eval remote_md=$remote_md
1259             if [[ ! -d $remote_md ]]
1260             then
1261                if  mkdir $remote_md
1262                then
1263                   printf "\n\n  *** directory for make depository:"
1264                   printf "\n           $remote_md"
1265                   printf "\n      was created\n"
1266                else
1267                   printf "\n  +++ directory for make depository:"
1268                   printf "\n           $remote_md"
1269                   printf "\n      cannot be created"
1270                   locat=local_depository_path; exit
1271                fi
1272             fi
1273
1274                # QUELLTEXT-DATEIEN AUS REPOSITORY INS DEPOSITORY KOPIEREN
1275             echo " "
1276             echo "  *** updating sources in $remote_md"
1277             cd  $remote_md
1278             cp  $local_source_path/${mainprog}_sources.tar  .
1279             tar xf  ${mainprog}_sources.tar
1280
1281                # MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF LOKALEM RECHNER AUSFUEHREN
1282             echo " "
1283             echo "  *** execute \"make\" on local host"
1284
1285             make  PROG=$mainprog  F90=$compiler_name  COPT="$cpp_options"  F90FLAGS="$compiler_options"  LDFLAGS="$loader_options"  2>&1 | tee ${remote_host}_last_make_protokoll
1286
1287             if [[ $? != 0 ]]
1288             then
1289                printf "\a\n  +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1290                if [[ $silent = false ]]
1291                then
1292                   answer=dummy
1293                   printf "\n"
1294                   while [[ "$answer" != c  &&  "$answer" != k ]]
1295                   do
1296                      printf "  >>> continue / list errors / kill mbuild (c/l/k) ? "
1297                      read  answer
1298                      if [[ "$answer" = l ]]
1299                      then
1300                         more ${remote_host}_last_make_protokoll
1301                      fi
1302                   done
1303                   if [[ $answer = k ]]
1304                   then
1305                      locat=user_abort; exit
1306                   fi
1307                fi
1308             fi
1309
1310
1311                # NEUE VERSION AUF LOKALEM RECHNER ZUSAMMENPACKEN
1312             printf "\n  *** tar update on local host ..."
1313             tar -cf  ${mainprog}_current_version.tar  *.$suf *.o *.mod
1314
1315
1316             # COMPILE THE UTILITY PROGRAMS
1317          elif [[ $compile_utility_programs = true ]]
1318          then
1319             printf "\n\n"
1320             echo "  *** compiling the utility programs ..."
1321             cd ${local_source_path}/../UTIL
1322             make  F90=$compiler_name  F90_SER=$compiler_name_ser  COPT="$cpp_options"  F90FLAGS="$compiler_options"  LDFLAGS="$loader_options"
1323             cd  -  > /dev/null
1324          fi
1325
1326       fi
1327
1328    fi
1329 done
1330
1331
1332 if [[ $host_found = false ]]
1333 then
1334    if [[ $host = all ]]
1335    then
1336       printf "\n  +++ no hosts found in configuration file"
1337    else
1338       printf "\n  +++ host \"$host\" not found in configuration file"
1339    fi
1340    locat=config_file; exit
1341 fi
1342
1343
1344
1345    # ABSCHLIESSENDE ARBEITEN
1346 rm -f  hosts_found_in_config_file
1347
Note: See TracBrowser for help on using the repository browser.