source: palm/tags/release-3.5/SCRIPTS/mbuild @ 3901

Last change on this file since 3901 was 201, checked in by raasch, 16 years ago

property Rev set for mrun, build and subjob

  • Property svn:keywords set to Id Rev
File size: 55.1 KB
Line 
1#!/bin/ksh
2# mbuild - Programmuebersetzungsscript
3# $Id: mbuild 201 2008-09-17 11:36:34Z suehring $
4
5     # Prozedur zur Uebersetzung von Programmteilen mittels make-Mechanismus
6     # auf einem Remote-Rechner, ausgehend von Quellcode auf einem lokalen
7     # Rechner
8
9     # Folgende Probleme existieren unter Linux, wenn keine AT&T-Korn-Shell
10     # verwendet wird:
11     # Wertzuweisungen an Variablen innerhalb von DO-Schleifen werden nicht
12     # nach aussen weitergegeben. "while read line" funktioniert nicht
13     # innerhalb einer Pipe.
14
15     # letzte Aenderung:
16     # 06/05/02 - Siggi - Beginn der Entwicklung
17     # 12/06/02 - Siggi - Abschluss der Entwicklungsarbeiten
18     # 23/06/02 - Siggi - voerst kein make-clean, Abbruch bei batch-mode
19     # 24/07/02 - Siggi - Keine Verwendung der temporaeren Datei tmp_mbuild
20     #                    unter linux mehr noetig, da nun AT&T-Korn-Shell
21     #                    benutzt wird
22     # 12/09/02 - Siggi - ibmh (hanni.hlrn.de) validiert
23     # 19/12/02 - Siggi - ibmb validiert
24     # 05/02/03 - Siggi - hostname nobela included
25     # 04/03/03 - Siggi - host nech included
26     # 06/03/03 - Siggi - make_call_string is echoed without '' to
27     #                    file LAST_MAKE_CALL (otherwise error on NEC, because
28     #                    '' are part of compiler options
29     # 16/03/03 - Siggi - Two underscores are placed in front of every define
30     #                    string, in case that palm.f90 version contains
31     #                    such strings
32     # 16/04/03 - Siggi - First extensions for linux machines
33     # 24/06/03 - Siggi - host orkan included
34     # 17/07/03 - Siggi - IP adress set to new "cross" machine at DKRZ
35     # 24/07/03 - Siggi - host maestro admitted
36     # 06/08/03 - Siggi - host gregale admitted
37     # 05/11/03 - Siggi - hosts irifi and quanero are now belonging to lcmuk
38     # 19/11/03 - Heiko - on lcmuk, mbuild does not tar the *.i files
39     # 08/01/04 - Siggi - additional preprocessor directive for ibm included
40     #                    (-D$OMP=OMP) in order to avoid problems with
41     #                    OMP_NUM_THREADS
42     # 09/01/04 - Siggi - action above cancelled
43     # 28/01/04 - Siggi - action above re-cancelled
44     # 08/03/04 - Siggi - host scirocco admitted
45     # 26/03/04 - Siggi - .o and .mod files are also deleted in depository, if
46     #                    the respective .f90 file is not listed in the makefile
47     #                    and deletion is demanded by the user
48     # 12/04/04 - Siggi - scp2 instead of scp used for transfer from decalpha
49     #                    due to error in ssh installation (otherwise a prompt
50     #                    for the password appears)
51     # 23/07/04 - Siggi - changes due to the new berni configuration
52     #                    (federation switch)
53     # 08/09/04 - Siggi - hanni IP address changed to 130.75.4.10
54     # 23/09/04 - Joerg - correction of IP-Address for 'cross' (DKRZ)
55     # 09/03/05 - Siggi - on nech, mbuild does not tar the *.i files
56     # 31/03/05 - Siggi - mbuild does not tar *.i files any more
57     # 24/04/05 - Siggi - netcdf support on lcmuk
58     # 25/04/05 - Siggi - netcdf support on gfdl3 (decalpha)
59     # 12/05/05 - Siggi - netcdf support on ibm
60     #                    set OBJECT_MODE=64 for compiling on ibmb, ibmh
61     # 18/05/05 - Siggi - netcdf support on nec
62     # 19/05/05 - Siggi - IP addres 134.75.155.74 changed to 165.132.26.56
63     # 23/05/05 - Siggi - netcdf support on ibms
64     # 01/06/05 - Siggi - reset of cpp_options to "" on lcmuk
65     # 30/06/05 - Siggi - netcdf support on bora
66     # 20/10/05 - Siggi - update of netcdf-version on decalpha (gfdl3)
67     # 04/11/05 - Siggi - netcdf 3.6.0-p1 on ibmh/ibmb
68     # 30/12/05 - Siggi - change of IP adresses in subnet 130.75.105
69     #                    host gfdl5 (ibmy) admitted
70     # 10/01/06 - Siggi - cpp directive for NetCDF 64bit support
71     # 20/01/06 - Siggi - cpp directive for ibmy
72     # 09/02/06 - Marcus- compile only once on lcmuk (as on ibmh/ibmb)
73     # 10/02/06 - Siggi - modifications for scp on decalpha
74     # 13/04/06 - Siggi - ostria admitted
75     # 19/04/06 - Siggi - preprocessor directive -D$OMP=OMP for ibm removed
76     # 23/05/05 - Siggi - lctit (SUN Fire X4600) admitted
77     # 29/05/05 - Siggi - atmos (lcide) admitted
78     # 23/08/06 - Siggi - netcdf support for scirocco (notebook)
79     # 24/11/06 - Siggi - breva and levanto admitted
80     # 07/02/07 - Siggi - adapted for RIAM (neck)
81     # 10/02/07 - Siggi - all hpmuk-related code removed
82     # 02/03/07 - Siggi - compilation of utility programs and transfer of
83     #                    scripts to remote hosts added (option -u)
84     # 14/03/07 - Siggi - fimm admitted, revision number added to terminal
85     #                    output
86     # 16/03/07 - Siggi - adjustments (netcdf) for lctit
87     #                    adjustments for running under pdksh, local ip-addres
88     #                    is not determined any more
89     # 30/03/07 - Siggi - cpp-directives/options + netcdf-options are read
90     #                    from configuration file
91     #                    host identifier (local_host) is read from config file
92     # 10/10/07 - Siggi - bugfix: handling of comment lines
93     # 18/07/08 - Siggi - adapted for lcsgih
94     # 21/07/08 - Siggi - mainprog (executable) is added to the tar-file
95     #                    ({mainprog}_current_version)
96
97
98
99    # VARIABLENVEREINBARUNGEN + DEFAULTWERTE
100 compile_utility_programs=false
101 config_file=.mrun.config
102 fimm=false
103 host=all
104 host_found=false
105 ibm_hb_done=false
106 lcmuk_done=false
107 locat=normal
108 makefile=""
109 remote_mode=interactive
110 scirocco=false
111 silent=false
112 suf=f90
113 update=false
114 working_directory=`pwd`
115
116 typeset -i  ih ihost=0
117
118 typeset  -R30 calltime
119 typeset  -L20 column1
120 typeset  -L50 column2
121 typeset  -L70 column3
122 typeset  -L40 version="MBUILD  2.0  Rev$Rev: 201 $"
123
124    # FEHLERBEHANDLUNG
125    # BEI EXIT:
126 trap 'rm -rf  $working_directory/tmp_mbuild
127       if [[ $locat != normal ]]
128       then
129          printf "\n\n +++ mbuild killed \n\n"
130       else
131          printf "\n\n *** mbuild finished \n\n"
132       fi' exit
133
134
135    # BEI TERMINAL-BREAK:
136 trap 'rm -rf  $working_directory/tmp_mbuild
137       printf "\n\n +++ mbuild killed by \"^C\" \n\n"
138       exit
139      ' 2
140
141
142
143    # SHELLSCRIPT-OPTIONEN EINLESEN
144 while  getopts  :c:h:m:rs:u  option
145 do
146   case  $option  in
147       (c)   config_file=$OPTARG;;
148       (h)   host=$OPTARG;;
149       (m)   makefile=$OPTARG;;
150       (r)   remote_mode=batch;;
151       (s)   suf=$OPTARG;;
152       (u)   compile_utility_programs=true;;
153       (\?)  printf "\n  +++ unknown option $OPTARG \n";
154             locat=parameter; exit;;
155   esac
156 done
157
158
159
160    # BATCH-MODE IST ZUR ZEIT NICHT FUNKTIONSFAEHIG
161 if [[ $remote_mode = batch ]]
162 then
163    printf "\n  +++ sorry, batch mode does not work! \n"
164    locat=parameter; exit
165 fi
166
167
168
169    # PRUEFEN, OB KONFIGURATIONS-DATEI VORHANDEN
170 if [[ ! -f $config_file ]]
171 then
172    printf "\n  +++ configuration file: "
173    printf "\n           $config_file"
174    printf "\n      does not exist"
175    locat=configuration; exit 
176 fi
177
178
179
180    # LOKALEN RECHNER ERMITTELN
181 local_host_real_name=$(hostname)
182# local_addres=$(nslookup `hostname` 2>&1 | grep "Address:" | tail -1 | awk '{print $2}')
183
184
185
186    # HOST-IDENTIFIER (local_host) AUS KONFIGURATIONSDATEI BESTIMMEN
187 line=""
188 grep  "%host_identifier"  $config_file  >  tmp_mbuild
189 while read line
190 do
191    if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
192    then
193       HOSTNAME=`echo $line | cut -d" " -s -f2`
194       host_identifier=`echo $line | cut -d" " -s -f3`
195       if [[ $local_host_real_name = $HOSTNAME ]]
196       then
197          local_host=$host_identifier
198          break
199       fi
200    fi
201 done < tmp_mbuild
202
203 if [[ "$local_host" = "" ]]
204 then
205    printf "\n  +++ no host identifier found in configuration file \"$config_file\""
206    printf "\n      for local host \"$local_host_real_name\"."
207    printf "\n      Please add line"
208    printf "\n      \"\%host_identifier $local_host_real_name <identifier>\""
209    printf "\n      to the configuration file."
210    locat=local_host; exit
211 fi
212
213
214
215 [[ $local_host_real_name = scirocco ]]  &&  scirocco=true
216 [[ $local_host_real_name = fimm.bccs.uib.no ]]  &&  fimm=true
217
218
219
220 if [[ $local_host != ibms ]]
221 then
222    config_file=$PWD/$config_file
223 else
224    config_file=`pwd`/$config_file
225 fi
226
227
228 
229    # BENUTZERNAMEN AUF LOKALEM RECHNER AUS KONFIGURATIONSDATEI ERMITTELN
230 line=""
231 grep  " $local_host" $config_file | grep "%remote_username"  >  tmp_mbuild
232 while read line
233 do
234    if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
235    then
236       local_username=`echo $line | cut -d" " -s -f2`
237    fi
238 done < tmp_mbuild
239
240
241 if [[ "$local_username" = "" ]]
242 then
243    printf "\n  +++ no user name found in configuration file"
244    printf "\n      for local host \"$local_host\" "
245    locat=config_file; exit
246 fi
247
248
249    # LOKALEN QUELLTEXTPFAD ERMITTELN.
250    # ZUERST PRUEFEN, OB EIN GLOBALER QUELLTEXTPFAD FUER ALLE RECHNER
251    # VEREINBART WURDE.
252    # DAZU ZUNAECHST ALLE IN DER KONFIGURATIONSDATEI VEREINBARTEN GLOBALEN
253    # VARIABLEN SETZEN, WEIL DIESE EVTL. IN PFADNAMEN VERWENDET WERDEN
254 line=""
255 grep "%" $config_file  >  tmp_mbuild
256 while read line
257 do
258    if [[ "$line" != ""  &&  "$(echo $line | cut -d" " -s -f3)" = ""  &&  $(echo $line | cut -c1) != "#" ]]
259    then
260       var=`echo $line | cut -d" " -s -f1 | cut -c2-`
261       value=`echo $line | cut -d" " -s -f2`
262       eval export $var=\$value
263#       eval echo \"   $var=\$$var \"   # AUSGABE ZU TESTZWECKEN
264    fi
265 done < tmp_mbuild
266
267    # NUN PRUEFEN, OB EIN GLOBALER QUELLTEXTPFAD VEREINBART WURDE
268 line=""
269 grep "%source_path" $config_file  >  tmp_mbuild
270 while read line
271 do
272    if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
273    then
274       if [[ "$(echo $line | cut -d" " -s -f3)" = "" ]]
275       then
276          global_source_path=`echo $line | cut -d" " -s -f2`
277       fi
278    fi
279 done < tmp_mbuild
280
281 line=""
282 grep  " $local_host" $config_file | grep "%source_path"  >  tmp_mbuild
283 while read line
284 do
285    if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
286    then
287       local_source_path=`echo $line | cut -d" " -s -f2`
288    fi
289 done < tmp_mbuild
290
291 if [[ "$local_source_path" = "" ]]
292 then
293    if [[ "$global_source_path" != "" ]]
294    then
295       local_source_path=$global_source_path
296    else
297       printf "\n  +++ no source path found in configuration file"
298       printf "\n      for local host \"$local_host\" "
299       printf "\n      please set \"\%source_path\" in configuration file"
300       locat=config_file; exit
301    fi
302 fi
303 eval local_source_path=$local_source_path
304 eval local_source_path=$local_source_path
305
306
307     # EBENSO PFAD FUER DAS MAKE-DEPOSITORY ERMITTELN
308 line=""
309 grep "%depository_path" $config_file  >  tmp_mbuild
310 while read line
311 do
312    if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
313    then
314       if [[ "$(echo $line | cut -d" " -s -f3)" = "" ]]
315       then
316          global_depository_path=`echo $line | cut -d" " -s -f2`
317       fi
318    fi
319 done < tmp_mbuild
320
321 line=""
322 grep  " $local_host" $config_file | grep "%depository_path"  >  tmp_mbuild
323 while read line
324 do
325    if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
326    then
327       local_depository_path=`echo $line | cut -d" " -s -f2`
328    fi
329 done < tmp_mbuild
330
331 if [[ "$local_depository_path" = "" ]]
332 then
333    if [[ "$global_depository_path" != "" ]]
334    then
335       local_depository_path=$global_depository_path
336    else
337       printf "\n  +++ no depository path found in configuration file"
338       printf "\n      for local host \"$local_host\" "
339       printf "\n      please set \"\%depository_path\" in configuration file"
340       locat=config_file; exit
341    fi
342 fi
343 eval local_depository_path=$local_depository_path
344 eval local_depository_path=$local_depository_path
345
346
347
348    # PRUEFEN, OB IN KONFIGURATIONSDATEI EIN HAUPTPROGRAMM
349    # VEREINBART WURDE
350 if [[ $(grep -c "%mainprog" $config_file) != 1 ]]
351 then
352    printf "\n  +++ no main program or more than one main program defined"
353    printf "\n      in configuration file"
354    locat=configuration; exit
355 else
356    line=`grep "%mainprog" $config_file`
357    if [[ "$line" = ""  ||  $(echo $line | cut -c1) = "#" ]]
358    then
359       printf "\n  +++ no main program defined in configuration file"
360       locat=configuration; exit
361    fi
362    mainprog=`echo $line | cut -d" " -s -f2 | cut -d"." -f1`
363 fi
364
365
366
367    # MAKEFILE vorhanden
368 [[ "$makefile" = "" ]]  &&  makefile=$local_source_path/Makefile
369 if [[ ! -f $makefile ]]
370 then
371    printf "\n  +++ makefile: "
372    printf "\n           $makefile"
373    printf "\n      does not exist"
374    locat=makefile; exit 
375 fi
376
377
378    # HEADER-AUSGABE (TEIL1: MELDUNGEN UEBER LOKALEN RECHNER)
379 calltime=$(date)
380 printf "\n"
381 printf "#------------------------------------------------------------------------# \n"
382 printf "| $version$calltime | \n"
383 printf "|                                                                        | \n"
384 column1="called on:"; column2=$local_host_real_name
385 printf "| $column1$column2 | \n"
386 column1="local username:"; column2=$local_username
387 printf "| $column1$column2 | \n"
388 column1="local IP-addres:"; column2=$local_addres
389 printf "| $column1$column2 | \n"
390 column1="config file:"; column2=$config_file
391 printf "| $column1$column2 | \n"
392 column1="makefile:"; column2=$makefile
393 printf "| $column1$column2 | \n"
394 column1="local source path:"; column2=$local_source_path
395 printf "| $column1$column2 | \n"
396 column1="make depository:"; column2=$local_depository_path
397 printf "| $column1$column2 | \n"
398 printf "#------------------------------------------------------------------------# \n"
399
400# printf "|                                                                        | \n"
401
402
403 if [[ $compile_utility_programs = false ]]
404 then
405
406    cd  $local_source_path
407
408
409       # LISTE DER ZU PRUEFENDEN QUELLTEXTDATEIEN ERSTELLEN
410    source_code_files=`ls -1  *.$suf`
411
412
413
414       # VERZEICHNIS FUER DAS MAKE-DEPOSITORY ERZEUGEN,
415       # FALLS NOCH NICHT VORHANDEN. ANSONSTEN ALLE DATEIEN
416       # NEUEREN DATUMS IN DIESES VERZEICHNIS KOPIEREN
417    if [[ ! -d $local_depository_path ]]
418    then
419       if  mkdir $local_depository_path
420       then
421          printf "\n\n  *** directory for make depository:"
422          printf "\n           $local_depository_path"
423          printf "\n      was created\n"
424
425             # MAKEFILE UND QUELLTEXTDATEIEN UNTER BEIBEHALTUNG
426             # IHRES DATUMS INS VERZEICHNIS KOPIEREN
427          printf "\n  *** makefile and source code files are copied to"
428          printf "\n      $local_depository_path\n"
429          printf "\n      copying makefile \"$makefile\" ..."
430          cp -p  $makefile  $local_depository_path/Makefile
431
432             # QUELLTEXTDATEIEN MUESSEN IM MAKEFILE AUFGEFUEHRT
433             # SEIN
434          for  filename  in  $source_code_files
435          do
436             if [[ $(grep -c $filename  $makefile) = 0 ]]
437             then
438                printf "\n  +++ source code file:"
439                printf "\n         $filename"
440                printf "\n      is not listed in makefile"
441                locat=makefile; exit
442             else
443                printf "\n      copying source code file \"$filename\" ..."
444                cp -p  $filename  $local_depository_path
445             fi
446          done
447          printf "\n"
448       else
449          printf "\n  +++ directory for make depository:"
450          printf "\n           $local_depository_path"
451          printf "\n      cannot be created"
452          locat=local_depository_path; exit
453       fi
454    else
455 
456       printf "\n  *** checking file status ..."
457
458          # MAKEFILE KOPIEREN, FALLS NEUEREN DATUMS
459       if [[ $makefile -nt $local_depository_path/Makefile ]]
460       then
461          printf "\n  *** update of \"$makefile\" "
462          cp -f -p  $makefile  $local_depository_path/Makefile
463          update=true
464
465             # PRUEFEN, OB ALLE DATEIEN IM DEPOSITORY AUCH IM NEUEN MAKEFILE
466             # VERZEICHNET SIND UND GEGEBENENFALLS DATEIEN LOESCHEN
467          cd  $local_depository_path
468          source_code_files_in_depository=`ls -1  *.$suf`
469          for  filename  in  $source_code_files_in_depository
470          do
471             if [[ $(grep -c $filename  Makefile) = 0 ]]
472             then
473                printf "\n  *** source code file in \"$local_depository_path\":"
474                printf "\n         $filename"
475                printf "\n      is not listed in makefile"
476                if [[ $silent = false ]]
477                then
478                   answer=dummy
479                   printf "\n\n"
480                   while [[ "$answer" != y  &&  "$answer" != Y  &&  "$answer" != n  &&  "$answer" != N ]]
481                   do
482                      printf " >>> delete \"$filename\" in \"$local_depository_path\" (y/n) ?  "
483                      read  answer
484                   done
485                   if [[ $answer = y  ||  $answer = Y ]]
486                   then
487                      base=`echo $filename | cut -d. -f2`
488                      rm -f  $filename
489                      rm -f  ${base}.o  ${base}.mod
490                      printf "\n  *** \"$filename\" deleted in \"$local_depository_path\" "
491                   else
492                      printf "\n  *** \"$filename\" not deleted in \"$local_depository_path\" "
493                   fi
494                fi
495             fi
496          done
497          cd  -  > /dev/null  2>&1
498
499       elif [[ $local_depository_path/Makefile -nt $makefile ]]
500       then
501          printf "\n  *** makefile in depository is newer than"
502          printf "\n      \"$makefile\" "
503          if [[ $silent = false ]]
504          then
505             answer=dummy
506             printf "\n\n"
507             while [[ "$answer" != y  &&  "$answer" != Y  &&  "$answer" != n  &&  "$answer" != N ]]
508             do
509                printf " >>> update \"$makefile\" (y/n) ?  "
510                read  answer
511             done
512             if [[ $answer = y  ||  $answer = Y ]]
513             then
514                cp -f -p  $local_depository_path/Makefile  $makefile
515                printf "\n  *** \"$makefile\" updated"
516             else
517                printf "\n  *** \"$makefile\" not updated"
518             fi
519          fi
520       fi
521
522          # QUELLTEXTDATEIEN KOPIEREN, FALLS NEUEREN DATUMS
523          # SIE MUESSEN IM MAKEFILE AUFGEFUEHRT SEIN
524       for  filename  in  $source_code_files
525       do
526          if [[ $(grep -c $filename  $makefile) = 0 ]]
527          then
528             printf "\n  +++ source code file:"
529             printf "\n         $filename"
530             printf "\n      is not listed in makefile"
531             locat=makefile; exit
532          else
533             if [[ ! -f $local_depository_path/$filename ]]
534             then
535                cp -p  $filename  $local_depository_path
536                printf "\n  *** source code file \"$filename\" created in \"$local_depository_path\" "
537             fi
538             if [[ $filename -nt $local_depository_path/$filename ]]
539             then
540                printf "\n  *** update of source code file \"$filename\" "
541                cp -f -p  $filename  $local_depository_path
542                update=true
543             fi
544          fi
545       done
546
547
548          # PRUEFEN, OB ALLE DATEIEN IM DEPOSITORY IM AKTUELLEN ARBEITSVERZEICHNIS VORHANDEN
549          # ODER EVTL. NEUEREN DATUMS SIND
550       cd  $local_depository_path
551       source_code_files_in_depository=`ls -1  *.$suf`
552       cd  -  > /dev/null  2>&1
553       for  filename  in  $source_code_files_in_depository
554       do
555          if [[ ! -f $filename ]]
556          then
557             printf "\n  *** source code file \"$filename\" does not exist in current directory"
558             if [[ $silent = false ]]
559             then
560                answer=dummy
561                printf "\n\n"
562                while [[ "$answer" != y  &&  "$answer" != Y  &&  "$answer" != n  &&  "$answer" != N ]]
563                do
564                   printf " >>> create \"$filename\" in current directory (y/n) ?  "
565                   read  answer
566                done
567                if [[ $answer = y  ||  $answer = Y ]]
568                then
569                   cp -p  $local_depository_path/$filename  $filename
570                   printf "\n  *** source code file \"$filename\" created in current directory"
571                else
572                   printf "\n  *** source code file \"$filename\" not created in current directory"
573                fi
574             fi
575          elif [[ $local_depository_path/$filename -nt $filename ]]
576          then
577             ls -al $local_depository_path/$filename
578             ls -al $filename
579             printf "\n  *** source code file \"$filename\" in depository is newer than in current directory"
580             if [[ $silent = false ]]
581             then
582                answer=dummy
583                printf "\n\n"
584                while [[ "$answer" != y  &&  "$answer" != Y  &&  "$answer" != n  &&  "$answer" != N ]]
585                do
586                   printf " >>> update \"$filename\" in current directory (y/n) ?  "
587                   read  answer
588                done
589                if [[ $answer = y  ||  $answer = Y ]]
590                then
591                   cp -f -p  $local_depository_path/$filename  $filename
592                   printf "\n  *** source code file \"$filename\" updated in current directory"
593                else
594                   printf "\n  *** source code file \"$filename\" not updated in current directory"
595                fi
596             fi
597          fi
598       done
599
600       if [[ $update = false ]]
601       then
602          printf "\n  *** no updates necessary in \"$local_depository_path\" "
603          if [[ $silent = false ]]
604          then
605             answer=dummy
606             printf "\n\n"
607             while [[ "$answer" != y  &&  "$answer" != Y  &&  "$answer" != n  &&  "$answer" != N ]]
608             do
609                printf " >>> continue with updates on remote hosts (y/n) ?  "
610                read  answer
611             done
612             if [[ $answer = n  ||  $answer = N ]]
613             then
614                locat=user_abort; exit
615             fi
616          fi
617       fi
618    fi
619 
620
621 
622       # QUELLTEXTDATEIEN UND MAKEFILE MIT TAR ZUSAMMENBINDEN
623       # IN JEDEM FALL ALLEN DATEIEN WRITE-PERMIT GEBEN, DAMIT ES AUF
624       # DEN REMOTE-RECHNERN NICHT EVTL. ZU PROBLEMEN BEIM UEBERSCHREIBEN KOMMT
625    printf "\n\n  *** tar of makefile and source files in depository ..." 
626    cd  $local_depository_path
627    chmod u+w  Makefile  *.$suf
628    tar -cf  ${mainprog}_sources.tar  Makefile  *.$suf
629    printf "\n"
630
631 fi
632
633
634
635    # BESTAETIGUNG ZUM WEITERMACHEN EINHOLEN
636 if [[ $host = all ]]
637 then
638    printf "\n  *** updates will be made for ALL hosts found in"
639    printf "\n      the configuration file"
640 else
641    printf "\n  *** update will be made for host \"$host\" "
642 fi
643
644 if [[ $silent = false ]]
645 then
646    answer=dummy
647    printf "\n\n"
648    while [[ "$answer" != y  &&  "$answer" != Y  &&  "$answer" != n  &&  "$answer" != N ]]
649    do
650       printf " >>> continue (y/n) ?  "
651       read  answer
652    done
653    if [[ $answer = n  ||  $answer = N ]]
654    then
655       locat=user_abort; exit
656    fi
657 fi
658 
659 
660
661   
662    # GENERIERUNG DER AKTUELLEN MODELLVERSION FUER ALLE RECHNER-/UEBERSETZUNGS-
663    # VERSIONEN, DIE IN DER KONFIGURATIONSDATEI GEFUNDEN WERDEN
664 printf "\n  *** scanning configuration file for host(s) ..."
665
666 grep  %fopts  $config_file  >  tmp_mbuild
667 while read line
668 do
669       # KOMMENTARZEILEN UEBERSPRINGEN
670    [[ $(echo $line | cut -c1) = "#" ]]  &&  continue
671    (( ihost = ihost + 1 ))
672    hostline[$ihost]="$line"
673 done < tmp_mbuild
674
675 
676 while (( ih < ihost ))
677 do
678
679    (( ih = ih + 1 ))
680
681       # REMOTE-RECHNER UND UEBERSETZUNGS-VERSION FESTSTELLEN
682       # NUR WEITERMACHEN, WENN ENTSPRECHENDER REMOTE-RECHNER MITTELS
683       # SHELLSCRIPT-OPTION AUCH AUSGEWAEHLT WURDE
684    remote_host_string=`echo ${hostline[$ih]} | cut -d" " -s -f3-`
685    remote_host=`echo $remote_host_string | cut -d" " -f1`
686    if [[ $host != all ]]
687    then
688       [[ $remote_host != $host ]]  &&  continue
689    fi
690    host_found=true
691    condition1=`echo $remote_host_string | cut -d" " -s -f2`
692    if [[ $condition1 = $remote_host ]]
693    then
694       condition1=""
695    else
696       condition2=`echo $remote_host_string | cut -d" " -s -f3`
697    fi
698
699    netcdf_inc=""
700    netcdf_lib=""
701
702       # AUF HLRN-RECHNER NUR EINMAL UEBERSETZEN
703    if [[ $remote_host = ibmb  ||  $remote_host = ibmh ]]
704    then
705       if [[ $ibm_hb_done = true ]]
706       then
707          printf "\n *** remote host \"$remote_host\" skipped since compilation has already"
708          printf "\n     been carried out on one of the HLRN machines\n"
709          continue
710       fi
711    fi
712
713       # AUF LCMUK-RECHNER NUR EINMAL UEBERSETZEN
714    if [[ $remote_host = lcmuk ]]
715    then
716       if [[ $lcmuk_done = true ]]
717       then
718          printf "\n *** local host \"$remote_host\" skipped since compilation has already"
719          printf "\n     been carried out on this host\n"
720          continue
721       fi
722    fi
723
724
725       # IP-ADRESSE DES REMOTE-RECHNERS BESTIMMEN
726    case  $remote_host  in
727        (lcmuk)          remote_addres=130.75.105.2;;
728        (lcsgib)         remote_addres=130.73.232.102;;
729        (lcsgih)         remote_addres=130.75.4.102;;
730        (lctit)          remote_addres=172.17.75.161;;
731        (decalpha)       remote_addres=165.132.26.56;;
732        (ibmb)           remote_addres=130.73.230.10;;
733        (ibmh)           remote_addres=130.75.4.10;;
734        (ibms)           remote_addres=150.183.5.101;;
735        (ibmy)           remote_addres=165.132.26.58;;
736        (nech)           remote_addres=136.172.44.192;;
737        (neck)           remote_addres=133.5.178.11;;
738        (ground.yonsei.ac.kr) remote_addres=134.75.155.33;;
739        (*)              if [[ $local_host != $remote_host ]]
740                         then
741                            printf "\n  +++ remote host \"$remote_host\" unknown";
742                            printf "\n      please inform S. Raasch!"
743                         fi;;
744    esac
745
746
747       # REMOTE-USERNAMEN ERMITTELN
748    line=""
749    found=false
750    grep  "$remote_host_string" $config_file | grep "%remote_username"  >  tmp_mbuild
751    while read line1
752    do
753
754       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
755       then
756          line="$line1"
757       fi
758
759       if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
760       then
761          remote_username=`echo $line | cut -d" " -s -f2`
762          found=true
763       fi
764
765    done < tmp_mbuild
766
767    if [[ $found = false ]]
768    then
769       printf "\n  +++ no remote username found in configuration file"
770       printf "\n      for \"$remote_host_string\" "
771       locat=config_file; exit
772    fi
773
774
775       # REMOTE-QUELLTEXTPFAD ERMITTELN
776    line=""
777    remote_source_path=""
778    grep  "$remote_host_string" $config_file | grep "%source_path"  >  tmp_mbuild
779    while read line1
780    do
781
782       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
783       then
784          line="$line1"
785       fi
786
787       if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
788       then
789          remote_source_path=`echo $line | cut -d" " -s -f2`
790       fi
791
792    done < tmp_mbuild
793
794    if [[ "$remote_source_path" = "" ]]
795    then
796       if [[ "$global_source_path" != "" ]]
797       then
798          remote_source_path=$global_source_path
799       else
800          printf "\n  +++ no source path found in configuration file"
801          printf "\n      for \"$remote_host_string\" "
802          locat=config_file; exit
803       fi
804    fi
805
806    remote_ud=${remote_source_path}/../UTIL
807    remote_ud=$(eval echo $remote_ud)
808
809
810       # REMOTE-PFAD FUER MAKE-DEPOSITORY ERMITTELN
811    remote_md=""
812    line=""
813    grep  "$remote_host_string" $config_file | grep "%depository_path"  >  tmp_mbuild
814    while read line1
815    do
816
817       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
818       then
819          line="$line1"
820       fi
821
822       if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
823       then
824          remote_md=`echo $line | cut -d" " -s -f2`
825       fi
826
827    done < tmp_mbuild
828
829    if [[ "$remote_md" = "" ]]
830    then
831       if [[ "$global_depository_path" != "" ]]
832       then
833          remote_md=$global_depository_path
834       else
835          printf "\n  +++ no depository path found in configuration file"
836          printf "\n      for \"$remote_host_string\" "
837          printf "\n      please set \"\%depository_path\" in configuration file"
838          locat=config_file; exit
839       fi
840    fi
841
842    remote_md=$(eval echo $remote_md)
843
844
845       # COMPILERNAMEN ERMITTELN
846    line=""
847    found=false
848    grep  "$remote_host_string" $config_file | grep "%compiler_name "  >  tmp_mbuild
849    while read line1
850    do
851
852       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
853       then
854          line="$line1"
855       fi
856
857       if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
858       then
859          compiler_name=`echo $line | cut -d" " -s -f2`
860          found=true
861       fi
862
863    done < tmp_mbuild
864
865    if [[ $found = false ]]
866    then
867       printf "\n  +++ no compiler name found in configuration file"
868       printf "\n      for \"$remote_host_string\" "
869       locat=config_file; exit
870    fi
871
872
873       # BEI BENUTZUNG EINES PARALLELEN COMPILERS MUSS AUCH EIN
874       # SERIELLER COMPILERNAME ERMITTELT WERDEN
875    if [[ $(echo $remote_host_string | grep -c parallel) = 1 ]]
876    then
877       line=""
878       found=false
879       grep  "$remote_host_string" $config_file | grep "%compiler_name_ser"  >  tmp_mbuild
880       while read line1
881       do
882
883          if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
884          then
885             line="$line1"
886          fi
887
888          if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
889          then
890             compiler_name_ser=`echo $line | cut -d" " -s -f2`
891             found=true
892          fi
893
894       done < tmp_mbuild
895
896       if [[ $found = false ]]
897       then
898          printf "\n  +++ no serial compiler name found in configuration file"
899          printf "\n      for \"$remote_host_string\" "
900          locat=config_file; exit
901       fi
902    else
903       compiler_name_ser=$compiler_name
904    fi
905
906
907
908       # PRAEPROZESSOR-OPTIONEN/DIREKTIVEN ERMITTELN
909    line=""
910    found=false
911    grep  "$remote_host_string" $config_file | grep "%cpp_options"  >  tmp_mbuild
912    while read line1
913    do
914
915       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
916       then
917          line="$line1"
918       fi
919
920       if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
921       then
922             # EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
923          cpp_options=`echo $line | cut -d" " -s -f2 | sed 's/::/%DUM%/g' | sed 's/:/ /g' | sed 's/%DUM%/:/g'`
924          found=true
925       fi
926
927    done < tmp_mbuild
928
929    if [[ $found = false ]]
930    then
931       printf "\n  +++ no preprocessor options found in configuration file"
932       printf "\n      for \"$remote_host_string\" "
933       locat=config_file; exit
934    fi
935
936
937       # RECHNERSPEZIFISCHE CPP-DIREKTIVEN HINZUFUEGEN
938    for  string  in  $remote_host_string
939    do
940       if [[ $(echo $remote_host | cut -c1-2) = lc  &&  $(echo $string | cut -c1-2) = lc ]]
941       then
942          cpp_options="$cpp_options -D__lc "
943       elif [[ $(echo $remote_host | cut -c1-3) = ibm  &&  $(echo $string | cut -c1-3) = ibm ]]
944       then
945          cpp_options="${cpp_options},-D__ibm"
946       elif [[ $(echo $remote_host | cut -c1-3) = nec  &&  $(echo $string | cut -c1-3) = nec ]]
947       then
948          cpp_options="${cpp_options} -D__nec"
949       else
950          if [[ $(echo $remote_host | cut -c1-3) = ibm ]]
951          then
952             cpp_options="${cpp_options},-D__$string"
953          else
954             cpp_options="$cpp_options -D__$string "
955          fi
956       fi
957    done
958
959
960
961       # NETCDF-OPTIONEN ERMITTELN
962    line=""
963    grep  "$remote_host_string" $config_file | grep "%netcdf_inc"  >  tmp_mbuild
964    while read line1
965    do
966
967       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
968       then
969          line="$line1"
970       fi
971
972       if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
973       then
974             # EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
975          netcdf_inc=`echo $line | cut -d" " -s -f2 | sed 's/::/%DUM%/g' | sed 's/:/ /g' | sed 's/%DUM%/:/g'`
976       fi
977
978    done < tmp_mbuild
979
980    line=""
981    grep  "$remote_host_string" $config_file | grep "%netcdf_lib"  >  tmp_mbuild
982    while read line1
983    do
984
985       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
986       then
987          line="$line1"
988       fi
989
990       if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
991       then
992             # EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
993          netcdf_lib=`echo $line | cut -d" " -s -f2 | sed 's/::/%DUM%/g' | sed 's/:/ /g' | sed 's/%DUM%/:/g'`
994       fi
995
996    done < tmp_mbuild
997
998
999
1000       # COMPILEROPTIONEN ERMITTELN
1001    line=""
1002    found=false
1003    grep  "$remote_host_string" $config_file | grep "%fopts"  >  tmp_mbuild
1004    while read line1
1005    do
1006
1007       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
1008       then
1009          line="$line1"
1010       fi
1011
1012       if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
1013       then
1014             # EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
1015          compiler_options=`echo $line | cut -d" " -s -f2 | sed 's/::/%DUM%/g' | sed 's/:/ /g' | sed 's/%DUM%/:/g'`
1016          found=true
1017
1018             # NETCDF-INCLUDEVERZEICHNIS HINZUFUEGEN
1019          compiler_options="$compiler_options $netcdf_inc"
1020       fi
1021
1022    done < tmp_mbuild
1023
1024    if [[ $found = false ]]
1025    then
1026       printf "\n  +++ no compiler options found in configuration file"
1027       printf "\n      for \"$remote_host_string\" "
1028       locat=config_file; exit
1029    fi
1030
1031
1032
1033       # LADER-OPTIONEN ERMITTELN
1034    line=""
1035    found=false
1036    grep  "$remote_host_string" $config_file | grep "%lopts"  >  tmp_mbuild
1037    while read line1
1038    do
1039
1040       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
1041       then
1042          line="$line1"
1043       fi
1044
1045       if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
1046       then
1047             # EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
1048          loader_options=`echo $line | cut -d" " -s -f2 | sed 's/::/%DUM%/g' | sed 's/:/ /g' | sed 's/%DUM%/:/g'`
1049          found=true
1050
1051             # NETCDF-LIBRARY HINZUFUEGEN
1052          loader_options="$loader_options $netcdf_lib"
1053       fi
1054
1055    done < tmp_mbuild
1056
1057    if [[ $found = false ]]
1058    then
1059       printf "\n  +++ no loader options found in configuration file"
1060       printf "\n      for \"$remote_host_string\" "
1061       locat=config_file; exit
1062    fi
1063
1064
1065    printf "\n\n#------------------------------------------------------------------------# \n"
1066    if [[ $remote_host = $local_host ]]
1067    then
1068       column1="remote_host:"; column2="$remote_host (= local host!)"
1069    else
1070       column1="remote_host:"; column2=$remote_host
1071    fi
1072    printf "| $column1$column2 | \n"
1073    printf "|                                                                        | \n"
1074    column1="conditions:"; column2="$condition1 $condition2"
1075    printf "| $column1$column2 | \n"
1076    column1="make depository:"; column2=$remote_md
1077    printf "| $column1$column2 | \n"
1078    if [[ $compile_utility_programs = true ]]
1079    then
1080       column1="utility directory:"; column2=$remote_ud
1081       printf "| $column1$column2 | \n"
1082    fi
1083    column1="username:"; column2=$remote_username
1084    printf "| $column1$column2 | \n"
1085    column1="addres:"; column2=$remote_addres
1086    printf "| $column1$column2 | \n"
1087    column1="compiler:"; column2=$compiler_name
1088    printf "| $column1$column2 | \n"
1089    if [[ $compile_utility_programs = true ]]
1090    then
1091       column1="serial compiler:"; column2=$compiler_name_ser
1092       printf "| $column1$column2 | \n"
1093    fi
1094    column1="cpp options:"; column2=$cpp_options
1095    printf "| $column1$column2 | \n"
1096    line=$(echo "$cpp_options" | cut -c51-)
1097    while [[ "$line" != "" ]]
1098    do
1099       column1=""
1100       column2=$line
1101       printf "| $column1$column2 | \n"
1102       line=$(echo "$line" | cut -c51-)
1103    done
1104    column1="compiler options:"; column2=$compiler_options
1105    printf "| $column1$column2 | \n"
1106    line=$(echo "$compiler_options" | cut -c51-)
1107    while [[ "$line" != "" ]]
1108    do
1109       column1=""
1110       column2=$line
1111       printf "| $column1$column2 | \n"
1112       line=$(echo "$line" | cut -c51-)
1113    done
1114    column1="loader options:"; column2=$loader_options
1115    printf "| $column1$column2 | \n"
1116    line=$(echo "$loader_options" | cut -c51-)
1117    while [[ "$line" != "" ]]
1118    do
1119       column1=""
1120       column2=$line
1121       printf "| $column1$column2 | \n"
1122       line=$(echo "$line" | cut -c51-)
1123    done
1124    printf "#------------------------------------------------------------------------# \n"
1125
1126    if [[ $silent = false ]]
1127    then
1128       answer=dummy
1129       printf "\n\n"
1130       while [[ "$answer" != y  &&  "$answer" != Y  && "$answer" != c  &&  "$answer" != C  && "$answer" != s  &&  "$answer" != S  &&  "$answer" != a  &&  "$answer" != A ]]
1131       do
1132          printf " >>> continue (y(es)/c(ontinue)/a(bort)/s(skip)) ?  "
1133          read  answer
1134       done
1135       if [[ $answer = a  ||  $answer = A ]]
1136       then
1137          locat=user_abort; exit
1138       fi
1139       if [[ $answer = c  ||  $answer = C ]]
1140       then
1141          silent=false
1142       fi
1143       if [[ $answer = s  ||  $answer = S ]]
1144       then
1145          continue
1146       fi
1147    fi
1148
1149
1150    if [[ $remote_mode = batch ]]
1151    then
1152
1153          # BATCH-JOB PARAMETER SETZEN
1154       case  $remote_host  in
1155           (t3eb)           queue=berte; memory=60; cputime=1000; xoption="-X 0";;
1156           (t3eh)           queue=comp_t3e; memory=60; cputime=360;;
1157           (t3ej2)          queue=normal; memory=60; cputime=1000; xoption="-X 0";;
1158           (t3ej5|ground.yonsei.ac.kr)  printf "\n  --- remote host \"$remote_host\" does not allow batch jobs"; continue;;
1159       esac
1160
1161
1162          # BATCH-JOB ZUSAMMENSTELLEN
1163       printf "\n  *** creating batch-job for remote host"
1164       echo " "  >  mbuild_job
1165
1166          # AUF CRAY-RECHNERN IN JUELICH WIRD KEIN BENUTZER-PROFILE AUSGEFUEHRT
1167          # DIES WIRD HIER GETAN, UM PFADE USW. ZU SETZEN
1168       if [[ $remote_host = t3ej2 ]]
1169       then
1170          echo "set +vx"                       >>  mbuild_job
1171          echo ". .profile"                    >>  mbuild_job
1172          echo "set -x"                        >>  mbuild_job
1173       fi
1174
1175          # AUF CRAY-RECHNERN GELADENE MODULE AUFLISTEN
1176       if [[ $host = t3eb  || $host = t3eh  ||  $host = t3ej2 ]]
1177       then
1178          echo "module list"                   >>  mbuild_job
1179       fi
1180
1181
1182          # WECHSEL IN TEMPORAERES VERZEICHNIS
1183       echo "cd ${remote_md}"  >>  mbuild_job
1184
1185
1186          # AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1187       echo  "scp  ${local_username}@${local_addres}:~/modell/code_3dp/palm_current_version/${mainprog}_sources.tar  ${mainprog}_sources.tar"  >>  mbuild_job
1188#       echo  "[[ \$? != 0 ]]  &&  (echo "+++ scp failed"; exit)"  >>  mbuild_job
1189
1190
1191          # FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
1192       echo  "[[ -f ${mainprog}_current_version.tar ]]  &&  tar -xvf  ${mainprog}_current_version.tar"  >>  mbuild_job
1193
1194
1195          # AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
1196       echo  "tar -xvf  ${mainprog}_sources.tar"              >>  mbuild_job
1197
1198
1199          # MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1200       echo  "make  PROG=$mainprog  F90=$compiler_name  COPT=\"$cpp_options\"  F90FLAGS=\"$compiler_options\"  LDFLAGS=\"$loader_options\" "  >>  mbuild_job
1201       echo  "chmod  u+w  *"                                  >>  mbuild_job
1202
1203          # NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
1204       echo  "tar -cvf  ${mainprog}_current_version.tar  *.f90  *.o"  >>  mbuild_job
1205
1206
1207          # AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
1208       echo  "make  clean"                                    >>  mbuild_job
1209       echo  "rm ${mainprog}_sources.tar"                     >>  mbuild_job
1210       echo  "rm *.f90 Makefile"                              >>  mbuild_job
1211
1212
1213
1214          # JOB MITTELS SUBJOB STARTEN
1215       printf "\n  *** sending batch job to remote host"
1216#       subjob  $xoption  -h $remote_host  -q $queue  -m $memory  -t $cputime  -v  mbuild_job
1217
1218
1219          # JOBFILE LOESCHEN
1220#       rm  aljob
1221
1222    else
1223
1224       if [[ $remote_host != $local_host ]]
1225       then
1226
1227          if [[ $compile_utility_programs = false ]]
1228          then
1229
1230                # AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1231                # FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
1232             echo "  *** copying \"${mainprog}_sources.tar\" to \"${remote_addres}:${remote_md}/\" "
1233             if [[ $remote_host != lctit ]]
1234             then
1235                ssh  ${remote_username}@${remote_addres} "[[ ! -d ${remote_md} ]]  &&  (echo \"  *** ${remote_md} will be created\"; mkdir -p  ${remote_md})"
1236             else
1237                   # TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
1238                   # MIT SSH, DESHALB AUFRUF PER PIPE
1239                print "[[ ! -d ${remote_md} ]]  &&  (echo \"  *** ${remote_md} will be created\"; mkdir -p  ${remote_md})"  |  ssh ${remote_username}@${remote_addres}  2>&1
1240             fi
1241             if [[ $local_host = decalpha ]]
1242             then
1243                   # DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTÄNDIGEN PFADES
1244                   # IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1245                   # KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1246                remote_md=`echo $remote_md | sed 's/\$HOME\///'`
1247                /bin/scp  ${mainprog}_sources.tar  ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
1248             else
1249                scp  ${mainprog}_sources.tar  ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
1250             fi
1251
1252
1253
1254                # FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
1255             echo "  *** untar previous update on remote host, if existing"
1256             if [[ $remote_host != lctit ]]
1257             then
1258                ssh  ${remote_username}@${remote_addres}  "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]]  &&  tar -xf  ${mainprog}_current_version.tar"
1259             else
1260                   # TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
1261                   # MIT SSH, DESHALB AUFRUF PER PIPE
1262                print  "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]]  &&  tar -xf  ${mainprog}_current_version.tar"  |  ssh  ${remote_username}@${remote_addres}  2>&1
1263             fi
1264
1265
1266                # AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
1267             echo "  *** untar actual sources on remote host"
1268             if [[ $remote_host != lctit ]]
1269             then
1270                ssh  ${remote_username}@${remote_addres}  "cd ${remote_md}; tar -xf  ${mainprog}_sources.tar"
1271             else
1272                   # TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
1273                   # MIT SSH, DESHALB AUFRUF PER PIPE
1274                print  "cd ${remote_md}; tar -xf  ${mainprog}_sources.tar"  |  ssh  ${remote_username}@${remote_addres}  2>&1
1275             fi
1276
1277
1278                # MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1279                # KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
1280                # BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
1281                # Z.B. DIE PFADE ZUM COMPILER)
1282             echo "  *** execute \"make\" on remote host"
1283
1284             if [[ $remote_host = nech ]]
1285             then
1286                make_call_string="sxmake  PROG=$mainprog  F90=$compiler_name  COPT=\"$cpp_options\"  F90FLAGS=\"$compiler_options\"  LDFLAGS=\"$loader_options\" "
1287             else
1288                make_call_string="make  PROG=$mainprog  F90=$compiler_name  COPT=\"$cpp_options\"  F90FLAGS=\"$compiler_options\"  LDFLAGS=\"$loader_options\" "
1289             fi
1290
1291             if [[ $remote_host = t3eh ]]
1292             then
1293       
1294                print "xterm\nexit\n cd ${remote_md}; make  PROG=$mainprog  F90=$compiler_name  COPT=\"$cpp_options\"  F90FLAGS=\"$compiler_options\"  LDFLAGS=\"$loader_options\" " | ssh  ${remote_username}@${remote_addres} 2>&1 | tee ${remote_host}_last_make_protokoll
1295
1296             elif [[ $remote_host = t3ej2  ||  $remote_host = ibms  ||  $remote_host = ibmy ]]
1297             then
1298
1299                ssh  ${remote_username}@${remote_addres}  "cd ${remote_md}; echo '$make_call_string' > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 | tee ${remote_host}_last_make_protokoll
1300
1301             elif [[ $remote_host = ibmb  ||  $remote_host = ibmh ]]
1302             then
1303
1304                print "export OBJECT_MODE=64; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" | ssh  ${remote_username}@${remote_addres} 2>&1 | tee ${remote_host}_last_make_protokoll
1305
1306             elif [[ $remote_host = lcsgib  ||  $remote_host = lcsgih ]]
1307             then
1308
1309                print ". /usr/share/modules/init/bash; module load mpt; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" | ssh  ${remote_username}@${remote_addres} 2>&1 | tee ${remote_host}_last_make_protokoll
1310#                print ". /usr/share/modules/init/bash; module load mvapich2/1.2rc1-intel; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" | ssh  ${remote_username}@${remote_addres} 2>&1 | tee ${remote_host}_last_make_protokoll
1311#                print ". /usr/share/modules/init/bash; module load mvapich2; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" | ssh  ${remote_username}@${remote_addres} 2>&1 | tee ${remote_host}_last_make_protokoll
1312
1313             elif [[ $remote_host = lctit ]]
1314             then
1315
1316                echo  " "  >  ${remote_host}_last_make_protokoll
1317                while [[ $(cat ${remote_host}_last_make_protokoll | grep -c "Forwarding to N1GE") = 0 ]]
1318                do
1319                   print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" | ssh  ${remote_username}@${remote_addres} 2>&1 | tee ${remote_host}_last_make_protokoll
1320                done
1321
1322             else
1323
1324                print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" | ssh  ${remote_username}@${remote_addres} 2>&1 | tee ${remote_host}_last_make_protokoll
1325
1326             fi
1327
1328             if [[ $(grep -c MAKE_ERROR ${remote_host}_last_make_protokoll) != 0 ]]
1329             then
1330                printf "\a\n  +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1331                if [[ $silent = false ]]
1332                then
1333                   answer=dummy
1334                   printf "\n"
1335                   while [[ "$answer" != c  &&  "$answer" != k ]]
1336                   do
1337                      printf "  >>> continue / list errors / kill mbuild (c/l/k) ? "
1338                      read  answer
1339                      if [[ "$answer" = l ]]
1340                      then
1341                         more ${remote_host}_last_make_protokoll
1342                      fi
1343                   done
1344                   if [[ $answer = k ]]
1345                   then
1346                      locat=user_abort; exit
1347                   fi
1348                fi
1349             fi
1350
1351
1352
1353                # NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
1354             printf "\n  *** tar update on remote host ..."
1355             if [[ $remote_host != lctit ]]
1356             then
1357                ssh  ${remote_username}@${remote_addres}  "cd ${remote_md}; chmod u+w *; tar -cf  ${mainprog}_current_version.tar  ${mainprog}  *.f90 *.o *.mod"
1358             else
1359                   # TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
1360                   # MIT SSH, DESHALB AUFRUF PER PIPE
1361                print  "cd ${remote_md}; chmod u+w *; tar -cf  ${mainprog}_current_version.tar  ${mainprog}  *.f90 *.o *.mod"  |  ssh  ${remote_username}@${remote_addres}  2>&1
1362             fi
1363
1364
1365                # AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
1366#             printf "\n  *** \"make clean\" on remote host ..."
1367#             ssh  ${remote_username}@${remote_addres}  "cd ${remote_md}; make clean; rm ${mainprog}_sources.tar; rm *.f90 Makefile"
1368#             printf "\n"
1369
1370
1371
1372
1373             # GLEICHE AKTIONEN FUER DIE UTILITY-PROGRAMME DURCHFUEHREN
1374             # AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1375             # FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
1376          elif [[ $compile_utility_programs = true ]]
1377          then
1378
1379             printf "\n\n"
1380             echo "  *** copying scripts and utility programs to \"${remote_addres}:${remote_ud}/\" "
1381             cd  ${local_source_path}/../SCRIPTS
1382
1383             if [[ $remote_host != lctit ]]
1384             then
1385                ssh  ${remote_username}@${remote_addres} "[[ ! -d ${remote_ud} ]]  &&  (echo \"  *** ${remote_ud} will be created\"; mkdir -p  ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]]  &&  (echo \"  *** ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)"
1386             else
1387                   # TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
1388                   # MIT SSH, DESHALB AUFRUF PER PIPE
1389                print "[[ ! -d ${remote_ud} ]]  &&  (echo \"  *** ${remote_ud} will be created\"; mkdir -p  ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]]  &&  (echo \"  *** ${remote_ud}/../SCRIPTS will be created\"; mkdir -p  ${remote_ud}/../SCRIPTS)"  |  ssh ${remote_username}@${remote_addres}  2>&1
1390             fi
1391
1392                # KOPIEREN DER SCRIPTE
1393             if [[ $local_host = decalpha ]]
1394             then
1395                   # DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTÄNDIGEN PFADES
1396                   # IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1397                   # KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1398                remote_ud=`echo $remote_ud | sed 's/\$HOME\///'`
1399                /bin/scp  batch_scp mbuild mrun subjob  ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS  >  /dev/null
1400             else
1401                scp  batch_scp mbuild mrun subjob  ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS  >  /dev/null
1402             fi
1403
1404             cd  -  > /dev/null
1405             cd  ${local_source_path}/../UTIL
1406
1407
1408                # KOPIEREN DER UTILITY-PROGRAMME
1409             if [[ $local_host = decalpha ]]
1410             then
1411                   # DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTÄNDIGEN PFADES
1412                   # IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1413                   # KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1414                remote_ud=`echo $remote_ud | sed 's/\$HOME\///'`
1415                /bin/scp  Makefile  *.f90  ${remote_username}@${remote_addres}:${remote_ud}  >  /dev/null
1416             else
1417                scp  Makefile  *.f90  ${remote_username}@${remote_addres}:${remote_ud}  >  /dev/null
1418             fi
1419
1420
1421
1422                # MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1423                # KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
1424                # BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
1425                # Z.B. DIE PFADE ZUM COMPILER)
1426             echo "  *** execute \"make\" on remote host"
1427
1428             if [[ $remote_host = nech ]]
1429             then
1430                make_call_string="sxmake  F90=$compiler_name  F90_SER=$compiler_name_ser  COPT=\"$cpp_options\"  F90FLAGS=\"$compiler_options\"  LDFLAGS=\"$loader_options\" "
1431             else
1432                make_call_string="make  F90=$compiler_name  F90_SER=$compiler_name_ser  COPT=\"$cpp_options\"  F90FLAGS=\"$compiler_options\"  LDFLAGS=\"$loader_options\" "
1433             fi
1434
1435             if [[ $remote_host = ibms  ||  $remote_host = ibmy ]]
1436             then
1437
1438                ssh  ${remote_username}@${remote_addres}  "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR"
1439
1440             elif [[ $remote_host = ibmb  ||  $remote_host = ibmh ]]
1441             then
1442
1443                print "export OBJECT_MODE=64; cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" | ssh  ${remote_username}@${remote_addres}
1444
1445             elif [[ $remote_host = lctit ]]
1446             then
1447
1448                echo  " "  >  ${remote_host}_last_make_protokoll
1449                while [[ $(cat ${remote_host}_last_make_protokoll | grep -c "Forwarding to N1GE") = 0 ]]
1450                do
1451                   print "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" | ssh  ${remote_username}@${remote_addres} 2>&1 | tee ${remote_host}_last_make_protokoll
1452                done
1453
1454             else
1455
1456                print "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" | ssh  ${remote_username}@${remote_addres} 2>&1 | tee ${remote_host}_last_make_protokoll
1457
1458             fi
1459
1460          fi    # ENDE UEBERSETZUNG DER UTILITY-PROGRAMME
1461
1462          rm -rf  ${remote_host}_last_make_protokoll
1463
1464             # NUR AUF EINEM HLRN-RECHNER UEBERSETZEN
1465          [[ $remote_host = ibmb  ||  $remote_host = ibmh ]]  &&  ibm_hb_done=true
1466
1467       else
1468
1469          if [[ $compile_utility_programs = false ]]
1470          then
1471
1472                # MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF LOKALEM RECHNER AUSFUEHREN
1473             echo " "
1474             echo "  *** execute \"make\" on local host"
1475
1476             make  PROG=$mainprog  F90=$compiler_name  COPT="$cpp_options"  F90FLAGS="$compiler_options"  LDFLAGS="$loader_options"  2>&1 | tee ${remote_host}_last_make_protokoll
1477
1478             if [[ $? != 0 ]]
1479             then
1480                printf "\a\n  +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1481                if [[ $silent = false ]]
1482                then
1483                   answer=dummy
1484                   printf "\n"
1485                   while [[ "$answer" != c  &&  "$answer" != k ]]
1486                   do
1487                      printf "  >>> continue / list errors / kill mbuild (c/l/k) ? "
1488                      read  answer
1489                      if [[ "$answer" = l ]]
1490                      then
1491                         more ${remote_host}_last_make_protokoll
1492                      fi
1493                   done
1494                   if [[ $answer = k ]]
1495                   then
1496                      locat=user_abort; exit
1497                   fi
1498                fi
1499             fi
1500
1501
1502                # NEUE VERSION AUF LOKALEM RECHNER ZUSAMMENPACKEN
1503             printf "\n  *** tar update on local host ..."
1504             tar -cf  ${mainprog}_current_version.tar  *.$suf *.o *.mod
1505
1506
1507             # COMPILE THE UTILITY PROGRAMS
1508          elif [[ $compile_utility_programs = true ]]
1509          then
1510             printf "\n\n"
1511             echo "  *** compiling the utility programs ..."
1512             cd ${local_source_path}/../UTIL
1513             make  F90=$compiler_name  F90_SER=$compiler_name_ser  COPT="$cpp_options"  F90FLAGS="$compiler_options"  LDFLAGS="$loader_options"
1514             cd  -  > /dev/null
1515          fi
1516
1517
1518             # NUR EINMAL AUF LCMUK UEBERSETZEN
1519          [[ $remote_host = lcmuk ]]  &&  lcmuk_done=true
1520
1521       fi
1522
1523    fi
1524 done
1525
1526
1527 if [[ $host_found = false ]]
1528 then
1529    if [[ $host = all ]]
1530    then
1531       printf "\n  +++ no hosts found in configuration file"
1532    else
1533       printf "\n  +++ host \"$host\" not found in configuration file"
1534    fi
1535    locat=config_file; exit
1536 fi
1537
1538
1539
1540    # ABSCHLIESSENDE ARBEITEN
1541 rm -f  hosts_found_in_config_file
1542
Note: See TracBrowser for help on using the repository browser.